Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 323 insertions, 0 deletions

diff --git a/drivers/pwm/pwm-brcmstb.c b/drivers/pwm/pwm-brcmstb.c
new file mode 100644
index 0000000000..a7d529bf76
--- /dev/null
+++ b/drivers/pwm/pwm-brcmstb.c
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Broadcom BCM7038 PWM driver
+ * Author: Florian Fainelli
+ *
+ * Copyright (C) 2015 Broadcom Corporation
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/spinlock.h>
+
+#define PWM_CTRL		0x00
+#define  CTRL_START		BIT(0)
+#define  CTRL_OEB		BIT(1)
+#define  CTRL_FORCE_HIGH	BIT(2)
+#define  CTRL_OPENDRAIN		BIT(3)
+#define  CTRL_CHAN_OFFS		4
+
+#define PWM_CTRL2		0x04
+#define  CTRL2_OUT_SELECT	BIT(0)
+
+#define PWM_CH_SIZE		0x8
+
+#define PWM_CWORD_MSB(ch)	(0x08 + ((ch) * PWM_CH_SIZE))
+#define PWM_CWORD_LSB(ch)	(0x0c + ((ch) * PWM_CH_SIZE))
+
+/* Number of bits for the CWORD value */
+#define CWORD_BIT_SIZE		16
+
+/*
+ * Maximum control word value allowed when variable-frequency PWM is used as a
+ * clock for the constant-frequency PMW.
+ */
+#define CONST_VAR_F_MAX		32768
+#define CONST_VAR_F_MIN		1
+
+#define PWM_ON(ch)		(0x18 + ((ch) * PWM_CH_SIZE))
+#define  PWM_ON_MIN		1
+#define PWM_PERIOD(ch)		(0x1c + ((ch) * PWM_CH_SIZE))
+#define  PWM_PERIOD_MIN		0
+
+#define PWM_ON_PERIOD_MAX	0xff
+
+struct brcmstb_pwm {
+	void __iomem *base;
+	struct clk *clk;
+	struct pwm_chip chip;
+};
+
+static inline u32 brcmstb_pwm_readl(struct brcmstb_pwm *p,
+				    unsigned int offset)
+{
+	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
+		return __raw_readl(p->base + offset);
+	else
+		return readl_relaxed(p->base + offset);
+}
+
+static inline void brcmstb_pwm_writel(struct brcmstb_pwm *p, u32 value,
+				      unsigned int offset)
+{
+	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
+		__raw_writel(value, p->base + offset);
+	else
+		writel_relaxed(value, p->base + offset);
+}
+
+static inline struct brcmstb_pwm *to_brcmstb_pwm(struct pwm_chip *chip)
+{
+	return container_of(chip, struct brcmstb_pwm, chip);
+}
+
+/*
+ * Fv is derived from the variable frequency output. The variable frequency
+ * output is configured using this formula:
+ *
+ * W = cword, if cword < 2 ^ 15 else 16-bit 2's complement of cword
+ *
+ * Fv = W x 2 ^ -16 x 27Mhz (reference clock)
+ *
+ * The period is: (period + 1) / Fv and "on" time is on / (period + 1)
+ *
+ * The PWM core framework specifies that the "duty_ns" parameter is in fact the
+ * "on" time, so this translates directly into our HW programming here.
+ */
+static int brcmstb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			      u64 duty_ns, u64 period_ns)
+{
+	struct brcmstb_pwm *p = to_brcmstb_pwm(chip);
+	unsigned long pc, dc, cword = CONST_VAR_F_MAX;
+	unsigned int channel = pwm->hwpwm;
+	u32 value;
+
+	/*
+	 * If asking for a duty_ns equal to period_ns, we need to substract
+	 * the period value by 1 to make it shorter than the "on" time and
+	 * produce a flat 100% duty cycle signal, and max out the "on" time
+	 */
+	if (duty_ns == period_ns) {
+		dc = PWM_ON_PERIOD_MAX;
+		pc = PWM_ON_PERIOD_MAX - 1;
+		goto done;
+	}
+
+	while (1) {
+		u64 rate;
+
+		/*
+		 * Calculate the base rate from base frequency and current
+		 * cword
+		 */
+		rate = (u64)clk_get_rate(p->clk) * (u64)cword;
+		rate >>= CWORD_BIT_SIZE;
+
+		pc = mul_u64_u64_div_u64(period_ns, rate, NSEC_PER_SEC);
+		dc = mul_u64_u64_div_u64(duty_ns + 1, rate, NSEC_PER_SEC);
+
+		/*
+		 * We can be called with separate duty and period updates,
+		 * so do not reject dc == 0 right away
+		 */
+		if (pc == PWM_PERIOD_MIN || (dc < PWM_ON_MIN && duty_ns))
+			return -EINVAL;
+
+		/* We converged on a calculation */
+		if (pc <= PWM_ON_PERIOD_MAX && dc <= PWM_ON_PERIOD_MAX)
+			break;
+
+		/*
+		 * The cword needs to be a power of 2 for the variable
+		 * frequency generator to output a 50% duty cycle variable
+		 * frequency which is used as input clock to the fixed
+		 * frequency generator.
+		 */
+		cword >>= 1;
+
+		/*
+		 * Desired periods are too large, we do not have a divider
+		 * for them
+		 */
+		if (cword < CONST_VAR_F_MIN)
+			return -EINVAL;
+	}
+
+done:
+	/*
+	 * Configure the defined "cword" value to have the variable frequency
+	 * generator output a base frequency for the constant frequency
+	 * generator to derive from.
+	 */
+	brcmstb_pwm_writel(p, cword >> 8, PWM_CWORD_MSB(channel));
+	brcmstb_pwm_writel(p, cword & 0xff, PWM_CWORD_LSB(channel));
+
+	/* Select constant frequency signal output */
+	value = brcmstb_pwm_readl(p, PWM_CTRL2);
+	value |= CTRL2_OUT_SELECT << (channel * CTRL_CHAN_OFFS);
+	brcmstb_pwm_writel(p, value, PWM_CTRL2);
+
+	/* Configure on and period value */
+	brcmstb_pwm_writel(p, pc, PWM_PERIOD(channel));
+	brcmstb_pwm_writel(p, dc, PWM_ON(channel));
+
+	return 0;
+}
+
+static inline void brcmstb_pwm_enable_set(struct brcmstb_pwm *p,
+					  unsigned int channel, bool enable)
+{
+	unsigned int shift = channel * CTRL_CHAN_OFFS;
+	u32 value;
+
+	value = brcmstb_pwm_readl(p, PWM_CTRL);
+
+	if (enable) {
+		value &= ~(CTRL_OEB << shift);
+		value |= (CTRL_START | CTRL_OPENDRAIN) << shift;
+	} else {
+		value &= ~((CTRL_START | CTRL_OPENDRAIN) << shift);
+		value |= CTRL_OEB << shift;
+	}
+
+	brcmstb_pwm_writel(p, value, PWM_CTRL);
+}
+
+static int brcmstb_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			     const struct pwm_state *state)
+{
+	struct brcmstb_pwm *p = to_brcmstb_pwm(chip);
+	int err;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		if (pwm->state.enabled)
+			brcmstb_pwm_enable_set(p, pwm->hwpwm, false);
+
+		return 0;
+	}
+
+	err = brcmstb_pwm_config(chip, pwm, state->duty_cycle, state->period);
+	if (err)
+		return err;
+
+	if (!pwm->state.enabled)
+		brcmstb_pwm_enable_set(p, pwm->hwpwm, true);
+
+	return 0;
+}
+
+static const struct pwm_ops brcmstb_pwm_ops = {
+	.apply = brcmstb_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static const struct of_device_id brcmstb_pwm_of_match[] = {
+	{ .compatible = "brcm,bcm7038-pwm", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, brcmstb_pwm_of_match);
+
+static int brcmstb_pwm_probe(struct platform_device *pdev)
+{
+	struct brcmstb_pwm *p;
+	int ret;
+
+	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	p->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(p->clk)) {
+		dev_err(&pdev->dev, "failed to obtain clock\n");
+		return PTR_ERR(p->clk);
+	}
+
+	ret = clk_prepare_enable(p->clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to enable clock: %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, p);
+
+	p->chip.dev = &pdev->dev;
+	p->chip.ops = &brcmstb_pwm_ops;
+	p->chip.npwm = 2;
+
+	p->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(p->base)) {
+		ret = PTR_ERR(p->base);
+		goto out_clk;
+	}
+
+	ret = pwmchip_add(&p->chip);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
+		goto out_clk;
+	}
+
+	return 0;
+
+out_clk:
+	clk_disable_unprepare(p->clk);
+	return ret;
+}
+
+static void brcmstb_pwm_remove(struct platform_device *pdev)
+{
+	struct brcmstb_pwm *p = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&p->chip);
+	clk_disable_unprepare(p->clk);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int brcmstb_pwm_suspend(struct device *dev)
+{
+	struct brcmstb_pwm *p = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(p->clk);
+
+	return 0;
+}
+
+static int brcmstb_pwm_resume(struct device *dev)
+{
+	struct brcmstb_pwm *p = dev_get_drvdata(dev);
+
+	clk_prepare_enable(p->clk);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(brcmstb_pwm_pm_ops, brcmstb_pwm_suspend,
+			 brcmstb_pwm_resume);
+
+static struct platform_driver brcmstb_pwm_driver = {
+	.probe = brcmstb_pwm_probe,
+	.remove_new = brcmstb_pwm_remove,
+	.driver = {
+		.name = "pwm-brcmstb",
+		.of_match_table = brcmstb_pwm_of_match,
+		.pm = &brcmstb_pwm_pm_ops,
+	},
+};
+module_platform_driver(brcmstb_pwm_driver);
+
+MODULE_AUTHOR("Florian Fainelli <f.fainelli@gmail.com>");
+MODULE_DESCRIPTION("Broadcom STB PWM driver");
+MODULE_ALIAS("platform:pwm-brcmstb");
+MODULE_LICENSE("GPL");