Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 577 insertions, 0 deletions

diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
new file mode 100644
index 000000000..25519cddc
--- /dev/null
+++ b/drivers/pwm/pwm-meson.c
@@ -0,0 +1,577 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * PWM controller driver for Amlogic Meson SoCs.
+ *
+ * This PWM is only a set of Gates, Dividers and Counters:
+ * PWM output is achieved by calculating a clock that permits calculating
+ * two periods (low and high). The counter then has to be set to switch after
+ * N cycles for the first half period.
+ * The hardware has no "polarity" setting. This driver reverses the period
+ * cycles (the low length is inverted with the high length) for
+ * PWM_POLARITY_INVERSED. This means that .get_state cannot read the polarity
+ * from the hardware.
+ * Setting the duty cycle will disable and re-enable the PWM output.
+ * Disabling the PWM stops the output immediately (without waiting for the
+ * current period to complete first).
+ *
+ * The public S912 (GXM) datasheet contains some documentation for this PWM
+ * controller starting on page 543:
+ * https://dl.khadas.com/Hardware/VIM2/Datasheet/S912_Datasheet_V0.220170314publicversion-Wesion.pdf
+ * An updated version of this IP block is found in S922X (G12B) SoCs. The
+ * datasheet contains the description for this IP block revision starting at
+ * page 1084:
+ * https://dn.odroid.com/S922X/ODROID-N2/Datasheet/S922X_Public_Datasheet_V0.2.pdf
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (C) 2014 Amlogic, Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define REG_PWM_A		0x0
+#define REG_PWM_B		0x4
+#define PWM_LOW_MASK		GENMASK(15, 0)
+#define PWM_HIGH_MASK		GENMASK(31, 16)
+
+#define REG_MISC_AB		0x8
+#define MISC_B_CLK_EN_SHIFT	23
+#define MISC_A_CLK_EN_SHIFT	15
+#define MISC_CLK_DIV_WIDTH	7
+#define MISC_B_CLK_DIV_SHIFT	16
+#define MISC_A_CLK_DIV_SHIFT	8
+#define MISC_B_CLK_SEL_SHIFT	6
+#define MISC_A_CLK_SEL_SHIFT	4
+#define MISC_CLK_SEL_MASK	0x3
+#define MISC_B_EN		BIT(1)
+#define MISC_A_EN		BIT(0)
+
+#define MESON_NUM_PWMS		2
+#define MESON_MAX_MUX_PARENTS	4
+
+static struct meson_pwm_channel_data {
+	u8		reg_offset;
+	u8		clk_sel_shift;
+	u8		clk_div_shift;
+	u8		clk_en_shift;
+	u32		pwm_en_mask;
+} meson_pwm_per_channel_data[MESON_NUM_PWMS] = {
+	{
+		.reg_offset	= REG_PWM_A,
+		.clk_sel_shift	= MISC_A_CLK_SEL_SHIFT,
+		.clk_div_shift	= MISC_A_CLK_DIV_SHIFT,
+		.clk_en_shift	= MISC_A_CLK_EN_SHIFT,
+		.pwm_en_mask	= MISC_A_EN,
+	},
+	{
+		.reg_offset	= REG_PWM_B,
+		.clk_sel_shift	= MISC_B_CLK_SEL_SHIFT,
+		.clk_div_shift	= MISC_B_CLK_DIV_SHIFT,
+		.clk_en_shift	= MISC_B_CLK_EN_SHIFT,
+		.pwm_en_mask	= MISC_B_EN,
+	}
+};
+
+struct meson_pwm_channel {
+	unsigned long rate;
+	unsigned int hi;
+	unsigned int lo;
+
+	struct clk_mux mux;
+	struct clk_divider div;
+	struct clk_gate gate;
+	struct clk *clk;
+};
+
+struct meson_pwm_data {
+	const char * const *parent_names;
+	unsigned int num_parents;
+};
+
+struct meson_pwm {
+	struct pwm_chip chip;
+	const struct meson_pwm_data *data;
+	struct meson_pwm_channel channels[MESON_NUM_PWMS];
+	void __iomem *base;
+	/*
+	 * Protects register (write) access to the REG_MISC_AB register
+	 * that is shared between the two PWMs.
+	 */
+	spinlock_t lock;
+};
+
+static inline struct meson_pwm *to_meson_pwm(struct pwm_chip *chip)
+{
+	return container_of(chip, struct meson_pwm, chip);
+}
+
+static int meson_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct meson_pwm *meson = to_meson_pwm(chip);
+	struct meson_pwm_channel *channel = &meson->channels[pwm->hwpwm];
+	struct device *dev = chip->dev;
+	int err;
+
+	err = clk_prepare_enable(channel->clk);
+	if (err < 0) {
+		dev_err(dev, "failed to enable clock %s: %d\n",
+			__clk_get_name(channel->clk), err);
+		return err;
+	}
+
+	return 0;
+}
+
+static void meson_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct meson_pwm *meson = to_meson_pwm(chip);
+	struct meson_pwm_channel *channel = &meson->channels[pwm->hwpwm];
+
+	clk_disable_unprepare(channel->clk);
+}
+
+static int meson_pwm_calc(struct meson_pwm *meson, struct pwm_device *pwm,
+			  const struct pwm_state *state)
+{
+	struct meson_pwm_channel *channel = &meson->channels[pwm->hwpwm];
+	unsigned int cnt, duty_cnt;
+	unsigned long fin_freq;
+	u64 duty, period, freq;
+
+	duty = state->duty_cycle;
+	period = state->period;
+
+	/*
+	 * Note this is wrong. The result is an output wave that isn't really
+	 * inverted and so is wrongly identified by .get_state as normal.
+	 * Fixing this needs some care however as some machines might rely on
+	 * this.
+	 */
+	if (state->polarity == PWM_POLARITY_INVERSED)
+		duty = period - duty;
+
+	freq = div64_u64(NSEC_PER_SEC * 0xffffULL, period);
+	if (freq > ULONG_MAX)
+		freq = ULONG_MAX;
+
+	fin_freq = clk_round_rate(channel->clk, freq);
+	if (fin_freq == 0) {
+		dev_err(meson->chip.dev, "invalid source clock frequency\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(meson->chip.dev, "fin_freq: %lu Hz\n", fin_freq);
+
+	cnt = div_u64(fin_freq * period, NSEC_PER_SEC);
+	if (cnt > 0xffff) {
+		dev_err(meson->chip.dev, "unable to get period cnt\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(meson->chip.dev, "period=%llu cnt=%u\n", period, cnt);
+
+	if (duty == period) {
+		channel->hi = cnt;
+		channel->lo = 0;
+	} else if (duty == 0) {
+		channel->hi = 0;
+		channel->lo = cnt;
+	} else {
+		duty_cnt = div_u64(fin_freq * duty, NSEC_PER_SEC);
+
+		dev_dbg(meson->chip.dev, "duty=%llu duty_cnt=%u\n", duty, duty_cnt);
+
+		channel->hi = duty_cnt;
+		channel->lo = cnt - duty_cnt;
+	}
+
+	channel->rate = fin_freq;
+
+	return 0;
+}
+
+static void meson_pwm_enable(struct meson_pwm *meson, struct pwm_device *pwm)
+{
+	struct meson_pwm_channel *channel = &meson->channels[pwm->hwpwm];
+	struct meson_pwm_channel_data *channel_data;
+	unsigned long flags;
+	u32 value;
+	int err;
+
+	channel_data = &meson_pwm_per_channel_data[pwm->hwpwm];
+
+	err = clk_set_rate(channel->clk, channel->rate);
+	if (err)
+		dev_err(meson->chip.dev, "setting clock rate failed\n");
+
+	spin_lock_irqsave(&meson->lock, flags);
+
+	value = FIELD_PREP(PWM_HIGH_MASK, channel->hi) |
+		FIELD_PREP(PWM_LOW_MASK, channel->lo);
+	writel(value, meson->base + channel_data->reg_offset);
+
+	value = readl(meson->base + REG_MISC_AB);
+	value |= channel_data->pwm_en_mask;
+	writel(value, meson->base + REG_MISC_AB);
+
+	spin_unlock_irqrestore(&meson->lock, flags);
+}
+
+static void meson_pwm_disable(struct meson_pwm *meson, struct pwm_device *pwm)
+{
+	unsigned long flags;
+	u32 value;
+
+	spin_lock_irqsave(&meson->lock, flags);
+
+	value = readl(meson->base + REG_MISC_AB);
+	value &= ~meson_pwm_per_channel_data[pwm->hwpwm].pwm_en_mask;
+	writel(value, meson->base + REG_MISC_AB);
+
+	spin_unlock_irqrestore(&meson->lock, flags);
+}
+
+static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			   const struct pwm_state *state)
+{
+	struct meson_pwm *meson = to_meson_pwm(chip);
+	struct meson_pwm_channel *channel = &meson->channels[pwm->hwpwm];
+	int err = 0;
+
+	if (!state->enabled) {
+		if (state->polarity == PWM_POLARITY_INVERSED) {
+			/*
+			 * This IP block revision doesn't have an "always high"
+			 * setting which we can use for "inverted disabled".
+			 * Instead we achieve this by setting mux parent with
+			 * highest rate and minimum divider value, resulting
+			 * in the shortest possible duration for one "count"
+			 * and "period == duty_cycle". This results in a signal
+			 * which is LOW for one "count", while being HIGH for
+			 * the rest of the (so the signal is HIGH for slightly
+			 * less than 100% of the period, but this is the best
+			 * we can achieve).
+			 */
+			channel->rate = ULONG_MAX;
+			channel->hi = ~0;
+			channel->lo = 0;
+
+			meson_pwm_enable(meson, pwm);
+		} else {
+			meson_pwm_disable(meson, pwm);
+		}
+	} else {
+		err = meson_pwm_calc(meson, pwm, state);
+		if (err < 0)
+			return err;
+
+		meson_pwm_enable(meson, pwm);
+	}
+
+	return 0;
+}
+
+static u64 meson_pwm_cnt_to_ns(struct pwm_chip *chip, struct pwm_device *pwm,
+			       u32 cnt)
+{
+	struct meson_pwm *meson = to_meson_pwm(chip);
+	struct meson_pwm_channel *channel;
+	unsigned long fin_freq;
+
+	/* to_meson_pwm() can only be used after .get_state() is called */
+	channel = &meson->channels[pwm->hwpwm];
+
+	fin_freq = clk_get_rate(channel->clk);
+	if (fin_freq == 0)
+		return 0;
+
+	return div64_ul(NSEC_PER_SEC * (u64)cnt, fin_freq);
+}
+
+static int meson_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+			       struct pwm_state *state)
+{
+	struct meson_pwm *meson = to_meson_pwm(chip);
+	struct meson_pwm_channel_data *channel_data;
+	struct meson_pwm_channel *channel;
+	u32 value;
+
+	if (!state)
+		return 0;
+
+	channel = &meson->channels[pwm->hwpwm];
+	channel_data = &meson_pwm_per_channel_data[pwm->hwpwm];
+
+	value = readl(meson->base + REG_MISC_AB);
+	state->enabled = value & channel_data->pwm_en_mask;
+
+	value = readl(meson->base + channel_data->reg_offset);
+	channel->lo = FIELD_GET(PWM_LOW_MASK, value);
+	channel->hi = FIELD_GET(PWM_HIGH_MASK, value);
+
+	state->period = meson_pwm_cnt_to_ns(chip, pwm, channel->lo + channel->hi);
+	state->duty_cycle = meson_pwm_cnt_to_ns(chip, pwm, channel->hi);
+
+	state->polarity = PWM_POLARITY_NORMAL;
+
+	return 0;
+}
+
+static const struct pwm_ops meson_pwm_ops = {
+	.request = meson_pwm_request,
+	.free = meson_pwm_free,
+	.apply = meson_pwm_apply,
+	.get_state = meson_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static const char * const pwm_meson8b_parent_names[] = {
+	"xtal", NULL, "fclk_div4", "fclk_div3"
+};
+
+static const struct meson_pwm_data pwm_meson8b_data = {
+	.parent_names = pwm_meson8b_parent_names,
+	.num_parents = ARRAY_SIZE(pwm_meson8b_parent_names),
+};
+
+/*
+ * Only the 2 first inputs of the GXBB AO PWMs are valid
+ * The last 2 are grounded
+ */
+static const char * const pwm_gxbb_ao_parent_names[] = {
+	"xtal", "clk81"
+};
+
+static const struct meson_pwm_data pwm_gxbb_ao_data = {
+	.parent_names = pwm_gxbb_ao_parent_names,
+	.num_parents = ARRAY_SIZE(pwm_gxbb_ao_parent_names),
+};
+
+static const char * const pwm_axg_ee_parent_names[] = {
+	"xtal", "fclk_div5", "fclk_div4", "fclk_div3"
+};
+
+static const struct meson_pwm_data pwm_axg_ee_data = {
+	.parent_names = pwm_axg_ee_parent_names,
+	.num_parents = ARRAY_SIZE(pwm_axg_ee_parent_names),
+};
+
+static const char * const pwm_axg_ao_parent_names[] = {
+	"xtal", "axg_ao_clk81", "fclk_div4", "fclk_div5"
+};
+
+static const struct meson_pwm_data pwm_axg_ao_data = {
+	.parent_names = pwm_axg_ao_parent_names,
+	.num_parents = ARRAY_SIZE(pwm_axg_ao_parent_names),
+};
+
+static const char * const pwm_g12a_ao_ab_parent_names[] = {
+	"xtal", "g12a_ao_clk81", "fclk_div4", "fclk_div5"
+};
+
+static const struct meson_pwm_data pwm_g12a_ao_ab_data = {
+	.parent_names = pwm_g12a_ao_ab_parent_names,
+	.num_parents = ARRAY_SIZE(pwm_g12a_ao_ab_parent_names),
+};
+
+static const char * const pwm_g12a_ao_cd_parent_names[] = {
+	"xtal", "g12a_ao_clk81",
+};
+
+static const struct meson_pwm_data pwm_g12a_ao_cd_data = {
+	.parent_names = pwm_g12a_ao_cd_parent_names,
+	.num_parents = ARRAY_SIZE(pwm_g12a_ao_cd_parent_names),
+};
+
+static const struct of_device_id meson_pwm_matches[] = {
+	{
+		.compatible = "amlogic,meson8b-pwm",
+		.data = &pwm_meson8b_data
+	},
+	{
+		.compatible = "amlogic,meson-gxbb-pwm",
+		.data = &pwm_meson8b_data
+	},
+	{
+		.compatible = "amlogic,meson-gxbb-ao-pwm",
+		.data = &pwm_gxbb_ao_data
+	},
+	{
+		.compatible = "amlogic,meson-axg-ee-pwm",
+		.data = &pwm_axg_ee_data
+	},
+	{
+		.compatible = "amlogic,meson-axg-ao-pwm",
+		.data = &pwm_axg_ao_data
+	},
+	{
+		.compatible = "amlogic,meson-g12a-ee-pwm",
+		.data = &pwm_meson8b_data
+	},
+	{
+		.compatible = "amlogic,meson-g12a-ao-pwm-ab",
+		.data = &pwm_g12a_ao_ab_data
+	},
+	{
+		.compatible = "amlogic,meson-g12a-ao-pwm-cd",
+		.data = &pwm_g12a_ao_cd_data
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, meson_pwm_matches);
+
+static int meson_pwm_init_channels(struct meson_pwm *meson)
+{
+	struct clk_parent_data mux_parent_data[MESON_MAX_MUX_PARENTS] = {};
+	struct device *dev = meson->chip.dev;
+	unsigned int i;
+	char name[255];
+	int err;
+
+	for (i = 0; i < meson->data->num_parents; i++) {
+		mux_parent_data[i].index = -1;
+		mux_parent_data[i].name = meson->data->parent_names[i];
+	}
+
+	for (i = 0; i < meson->chip.npwm; i++) {
+		struct meson_pwm_channel *channel = &meson->channels[i];
+		struct clk_parent_data div_parent = {}, gate_parent = {};
+		struct clk_init_data init = {};
+
+		snprintf(name, sizeof(name), "%s#mux%u", dev_name(dev), i);
+
+		init.name = name;
+		init.ops = &clk_mux_ops;
+		init.flags = 0;
+		init.parent_data = mux_parent_data;
+		init.num_parents = meson->data->num_parents;
+
+		channel->mux.reg = meson->base + REG_MISC_AB;
+		channel->mux.shift =
+				meson_pwm_per_channel_data[i].clk_sel_shift;
+		channel->mux.mask = MISC_CLK_SEL_MASK;
+		channel->mux.flags = 0;
+		channel->mux.lock = &meson->lock;
+		channel->mux.table = NULL;
+		channel->mux.hw.init = &init;
+
+		err = devm_clk_hw_register(dev, &channel->mux.hw);
+		if (err) {
+			dev_err(dev, "failed to register %s: %d\n", name, err);
+			return err;
+		}
+
+		snprintf(name, sizeof(name), "%s#div%u", dev_name(dev), i);
+
+		init.name = name;
+		init.ops = &clk_divider_ops;
+		init.flags = CLK_SET_RATE_PARENT;
+		div_parent.index = -1;
+		div_parent.hw = &channel->mux.hw;
+		init.parent_data = &div_parent;
+		init.num_parents = 1;
+
+		channel->div.reg = meson->base + REG_MISC_AB;
+		channel->div.shift = meson_pwm_per_channel_data[i].clk_div_shift;
+		channel->div.width = MISC_CLK_DIV_WIDTH;
+		channel->div.hw.init = &init;
+		channel->div.flags = 0;
+		channel->div.lock = &meson->lock;
+
+		err = devm_clk_hw_register(dev, &channel->div.hw);
+		if (err) {
+			dev_err(dev, "failed to register %s: %d\n", name, err);
+			return err;
+		}
+
+		snprintf(name, sizeof(name), "%s#gate%u", dev_name(dev), i);
+
+		init.name = name;
+		init.ops = &clk_gate_ops;
+		init.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED;
+		gate_parent.index = -1;
+		gate_parent.hw = &channel->div.hw;
+		init.parent_data = &gate_parent;
+		init.num_parents = 1;
+
+		channel->gate.reg = meson->base + REG_MISC_AB;
+		channel->gate.bit_idx = meson_pwm_per_channel_data[i].clk_en_shift;
+		channel->gate.hw.init = &init;
+		channel->gate.flags = 0;
+		channel->gate.lock = &meson->lock;
+
+		err = devm_clk_hw_register(dev, &channel->gate.hw);
+		if (err) {
+			dev_err(dev, "failed to register %s: %d\n", name, err);
+			return err;
+		}
+
+		channel->clk = devm_clk_hw_get_clk(dev, &channel->gate.hw, NULL);
+		if (IS_ERR(channel->clk)) {
+			err = PTR_ERR(channel->clk);
+			dev_err(dev, "failed to register %s: %d\n", name, err);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static int meson_pwm_probe(struct platform_device *pdev)
+{
+	struct meson_pwm *meson;
+	int err;
+
+	meson = devm_kzalloc(&pdev->dev, sizeof(*meson), GFP_KERNEL);
+	if (!meson)
+		return -ENOMEM;
+
+	meson->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(meson->base))
+		return PTR_ERR(meson->base);
+
+	spin_lock_init(&meson->lock);
+	meson->chip.dev = &pdev->dev;
+	meson->chip.ops = &meson_pwm_ops;
+	meson->chip.npwm = MESON_NUM_PWMS;
+
+	meson->data = of_device_get_match_data(&pdev->dev);
+
+	err = meson_pwm_init_channels(meson);
+	if (err < 0)
+		return err;
+
+	err = devm_pwmchip_add(&pdev->dev, &meson->chip);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to register PWM chip: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static struct platform_driver meson_pwm_driver = {
+	.driver = {
+		.name = "meson-pwm",
+		.of_match_table = meson_pwm_matches,
+	},
+	.probe = meson_pwm_probe,
+};
+module_platform_driver(meson_pwm_driver);
+
+MODULE_DESCRIPTION("Amlogic Meson PWM Generator driver");
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_LICENSE("Dual BSD/GPL");