Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 640 insertions, 0 deletions

diff --git a/drivers/regulator/lp8788-ldo.c b/drivers/regulator/lp8788-ldo.c
new file mode 100644
index 0000000000..8e45b7b995
--- /dev/null
+++ b/drivers/regulator/lp8788-ldo.c
@@ -0,0 +1,640 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TI LP8788 MFD - ldo regulator driver
+ *
+ * Copyright 2012 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/gpio/consumer.h>
+#include <linux/mfd/lp8788.h>
+
+/* register address */
+#define LP8788_EN_LDO_A			0x0D	/* DLDO 1 ~ 8 */
+#define LP8788_EN_LDO_B			0x0E	/* DLDO 9 ~ 12, ALDO 1 ~ 4 */
+#define LP8788_EN_LDO_C			0x0F	/* ALDO 5 ~ 10 */
+#define LP8788_EN_SEL			0x10
+#define LP8788_DLDO1_VOUT		0x2E
+#define LP8788_DLDO2_VOUT		0x2F
+#define LP8788_DLDO3_VOUT		0x30
+#define LP8788_DLDO4_VOUT		0x31
+#define LP8788_DLDO5_VOUT		0x32
+#define LP8788_DLDO6_VOUT		0x33
+#define LP8788_DLDO7_VOUT		0x34
+#define LP8788_DLDO8_VOUT		0x35
+#define LP8788_DLDO9_VOUT		0x36
+#define LP8788_DLDO10_VOUT		0x37
+#define LP8788_DLDO11_VOUT		0x38
+#define LP8788_DLDO12_VOUT		0x39
+#define LP8788_ALDO1_VOUT		0x3A
+#define LP8788_ALDO2_VOUT		0x3B
+#define LP8788_ALDO3_VOUT		0x3C
+#define LP8788_ALDO4_VOUT		0x3D
+#define LP8788_ALDO5_VOUT		0x3E
+#define LP8788_ALDO6_VOUT		0x3F
+#define LP8788_ALDO7_VOUT		0x40
+#define LP8788_ALDO8_VOUT		0x41
+#define LP8788_ALDO9_VOUT		0x42
+#define LP8788_ALDO10_VOUT		0x43
+#define LP8788_DLDO1_TIMESTEP		0x44
+
+/* mask/shift bits */
+#define LP8788_EN_DLDO1_M		BIT(0)	/* Addr 0Dh ~ 0Fh */
+#define LP8788_EN_DLDO2_M		BIT(1)
+#define LP8788_EN_DLDO3_M		BIT(2)
+#define LP8788_EN_DLDO4_M		BIT(3)
+#define LP8788_EN_DLDO5_M		BIT(4)
+#define LP8788_EN_DLDO6_M		BIT(5)
+#define LP8788_EN_DLDO7_M		BIT(6)
+#define LP8788_EN_DLDO8_M		BIT(7)
+#define LP8788_EN_DLDO9_M		BIT(0)
+#define LP8788_EN_DLDO10_M		BIT(1)
+#define LP8788_EN_DLDO11_M		BIT(2)
+#define LP8788_EN_DLDO12_M		BIT(3)
+#define LP8788_EN_ALDO1_M		BIT(4)
+#define LP8788_EN_ALDO2_M		BIT(5)
+#define LP8788_EN_ALDO3_M		BIT(6)
+#define LP8788_EN_ALDO4_M		BIT(7)
+#define LP8788_EN_ALDO5_M		BIT(0)
+#define LP8788_EN_ALDO6_M		BIT(1)
+#define LP8788_EN_ALDO7_M		BIT(2)
+#define LP8788_EN_ALDO8_M		BIT(3)
+#define LP8788_EN_ALDO9_M		BIT(4)
+#define LP8788_EN_ALDO10_M		BIT(5)
+#define LP8788_EN_SEL_DLDO911_M		BIT(0)	/* Addr 10h */
+#define LP8788_EN_SEL_DLDO7_M		BIT(1)
+#define LP8788_EN_SEL_ALDO7_M		BIT(2)
+#define LP8788_EN_SEL_ALDO5_M		BIT(3)
+#define LP8788_EN_SEL_ALDO234_M		BIT(4)
+#define LP8788_EN_SEL_ALDO1_M		BIT(5)
+#define LP8788_VOUT_5BIT_M		0x1F	/* Addr 2Eh ~ 43h */
+#define LP8788_VOUT_4BIT_M		0x0F
+#define LP8788_VOUT_3BIT_M		0x07
+#define LP8788_VOUT_1BIT_M		0x01
+#define LP8788_STARTUP_TIME_M		0xF8	/* Addr 44h ~ 59h */
+#define LP8788_STARTUP_TIME_S		3
+
+#define ENABLE_TIME_USEC		32
+
+enum lp8788_ldo_id {
+	DLDO1,
+	DLDO2,
+	DLDO3,
+	DLDO4,
+	DLDO5,
+	DLDO6,
+	DLDO7,
+	DLDO8,
+	DLDO9,
+	DLDO10,
+	DLDO11,
+	DLDO12,
+	ALDO1,
+	ALDO2,
+	ALDO3,
+	ALDO4,
+	ALDO5,
+	ALDO6,
+	ALDO7,
+	ALDO8,
+	ALDO9,
+	ALDO10,
+};
+
+struct lp8788_ldo {
+	struct lp8788 *lp;
+	struct regulator_desc *desc;
+	struct regulator_dev *regulator;
+	struct gpio_desc *ena_gpiod;
+};
+
+/* DLDO 1, 2, 3, 9 voltage table */
+static const int lp8788_dldo1239_vtbl[] = {
+	1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
+	2600000, 2700000, 2800000, 2900000, 3000000, 2850000, 2850000, 2850000,
+	2850000, 2850000, 2850000, 2850000, 2850000, 2850000, 2850000, 2850000,
+	2850000, 2850000, 2850000, 2850000, 2850000, 2850000, 2850000, 2850000,
+};
+
+/* DLDO 4 voltage table */
+static const int lp8788_dldo4_vtbl[] = { 1800000, 3000000 };
+
+/* DLDO 5, 7, 8 and ALDO 6 voltage table */
+static const int lp8788_dldo578_aldo6_vtbl[] = {
+	1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
+	2600000, 2700000, 2800000, 2900000, 3000000, 3000000, 3000000, 3000000,
+};
+
+/* DLDO 6 voltage table */
+static const int lp8788_dldo6_vtbl[] = {
+	3000000, 3100000, 3200000, 3300000, 3400000, 3500000, 3600000, 3600000,
+};
+
+/* DLDO 10, 11 voltage table */
+static const int lp8788_dldo1011_vtbl[] = {
+	1100000, 1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000,
+	1500000, 1500000, 1500000, 1500000, 1500000, 1500000, 1500000, 1500000,
+};
+
+/* ALDO 1 voltage table */
+static const int lp8788_aldo1_vtbl[] = { 1800000, 2850000 };
+
+/* ALDO 7 voltage table */
+static const int lp8788_aldo7_vtbl[] = {
+	1200000, 1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1800000,
+};
+
+static int lp8788_ldo_enable_time(struct regulator_dev *rdev)
+{
+	struct lp8788_ldo *ldo = rdev_get_drvdata(rdev);
+	enum lp8788_ldo_id id = rdev_get_id(rdev);
+	u8 val, addr = LP8788_DLDO1_TIMESTEP + id;
+
+	if (lp8788_read_byte(ldo->lp, addr, &val))
+		return -EINVAL;
+
+	val = (val & LP8788_STARTUP_TIME_M) >> LP8788_STARTUP_TIME_S;
+
+	return ENABLE_TIME_USEC * val;
+}
+
+static const struct regulator_ops lp8788_ldo_voltage_table_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.enable_time = lp8788_ldo_enable_time,
+};
+
+static const struct regulator_ops lp8788_ldo_voltage_fixed_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.enable_time = lp8788_ldo_enable_time,
+};
+
+static const struct regulator_desc lp8788_dldo_desc[] = {
+	{
+		.name = "dldo1",
+		.id = DLDO1,
+		.ops = &lp8788_ldo_voltage_table_ops,
+		.n_voltages = ARRAY_SIZE(lp8788_dldo1239_vtbl),
+		.volt_table = lp8788_dldo1239_vtbl,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.vsel_reg = LP8788_DLDO1_VOUT,
+		.vsel_mask = LP8788_VOUT_5BIT_M,
+		.enable_reg = LP8788_EN_LDO_A,
+		.enable_mask = LP8788_EN_DLDO1_M,
+	},
+	{
+		.name = "dldo2",
+		.id = DLDO2,
+		.ops = &lp8788_ldo_voltage_table_ops,
+		.n_voltages = ARRAY_SIZE(lp8788_dldo1239_vtbl),
+		.volt_table = lp8788_dldo1239_vtbl,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.vsel_reg = LP8788_DLDO2_VOUT,
+		.vsel_mask = LP8788_VOUT_5BIT_M,
+		.enable_reg = LP8788_EN_LDO_A,
+		.enable_mask = LP8788_EN_DLDO2_M,
+	},
+	{
+		.name = "dldo3",
+		.id = DLDO3,
+		.ops = &lp8788_ldo_voltage_table_ops,
+		.n_voltages = ARRAY_SIZE(lp8788_dldo1239_vtbl),
+		.volt_table = lp8788_dldo1239_vtbl,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.vsel_reg = LP8788_DLDO3_VOUT,
+		.vsel_mask = LP8788_VOUT_5BIT_M,
+		.enable_reg = LP8788_EN_LDO_A,
+		.enable_mask = LP8788_EN_DLDO3_M,
+	},
+	{
+		.name = "dldo4",
+		.id = DLDO4,
+		.ops = &lp8788_ldo_voltage_table_ops,
+		.n_voltages = ARRAY_SIZE(lp8788_dldo4_vtbl),
+		.volt_table = lp8788_dldo4_vtbl,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.vsel_reg = LP8788_DLDO4_VOUT,
+		.vsel_mask = LP8788_VOUT_1BIT_M,
+		.enable_reg = LP8788_EN_LDO_A,
+		.enable_mask = LP8788_EN_DLDO4_M,
+	},
+	{
+		.name = "dldo5",
+		.id = DLDO5,
+		.ops = &lp8788_ldo_voltage_table_ops,
+		.n_voltages = ARRAY_SIZE(lp8788_dldo578_aldo6_vtbl),
+		.volt_table = lp8788_dldo578_aldo6_vtbl,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.vsel_reg = LP8788_DLDO5_VOUT,
+		.vsel_mask = LP8788_VOUT_4BIT_M,
+		.enable_reg = LP8788_EN_LDO_A,
+		.enable_mask = LP8788_EN_DLDO5_M,
+	},
+	{
+		.name = "dldo6",
+		.id = DLDO6,
+		.ops = &lp8788_ldo_voltage_table_ops,
+		.n_voltages = ARRAY_SIZE(lp8788_dldo6_vtbl),
+		.volt_table = lp8788_dldo6_vtbl,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.vsel_reg = LP8788_DLDO6_VOUT,
+		.vsel_mask = LP8788_VOUT_3BIT_M,
+		.enable_reg = LP8788_EN_LDO_A,
+		.enable_mask = LP8788_EN_DLDO6_M,
+	},
+	{
+		.name = "dldo7",
+		.id = DLDO7,
+		.ops = &lp8788_ldo_voltage_table_ops,
+		.n_voltages = ARRAY_SIZE(lp8788_dldo578_aldo6_vtbl),
+		.volt_table = lp8788_dldo578_aldo6_vtbl,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.vsel_reg = LP8788_DLDO7_VOUT,
+		.vsel_mask = LP8788_VOUT_4BIT_M,
+		.enable_reg = LP8788_EN_LDO_A,
+		.enable_mask = LP8788_EN_DLDO7_M,
+	},
+	{
+		.name = "dldo8",
+		.id = DLDO8,
+		.ops = &lp8788_ldo_voltage_table_ops,
+		.n_voltages = ARRAY_SIZE(lp8788_dldo578_aldo6_vtbl),
+		.volt_table = lp8788_dldo578_aldo6_vtbl,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.vsel_reg = LP8788_DLDO8_VOUT,
+		.vsel_mask = LP8788_VOUT_4BIT_M,
+		.enable_reg = LP8788_EN_LDO_A,
+		.enable_mask = LP8788_EN_DLDO8_M,
+	},
+	{
+		.name = "dldo9",
+		.id = DLDO9,
+		.ops = &lp8788_ldo_voltage_table_ops,
+		.n_voltages = ARRAY_SIZE(lp8788_dldo1239_vtbl),
+		.volt_table = lp8788_dldo1239_vtbl,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.vsel_reg = LP8788_DLDO9_VOUT,
+		.vsel_mask = LP8788_VOUT_5BIT_M,
+		.enable_reg = LP8788_EN_LDO_B,
+		.enable_mask = LP8788_EN_DLDO9_M,
+	},
+	{
+		.name = "dldo10",
+		.id = DLDO10,
+		.ops = &lp8788_ldo_voltage_table_ops,
+		.n_voltages = ARRAY_SIZE(lp8788_dldo1011_vtbl),
+		.volt_table = lp8788_dldo1011_vtbl,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.vsel_reg = LP8788_DLDO10_VOUT,
+		.vsel_mask = LP8788_VOUT_4BIT_M,
+		.enable_reg = LP8788_EN_LDO_B,
+		.enable_mask = LP8788_EN_DLDO10_M,
+	},
+	{
+		.name = "dldo11",
+		.id = DLDO11,
+		.ops = &lp8788_ldo_voltage_table_ops,
+		.n_voltages = ARRAY_SIZE(lp8788_dldo1011_vtbl),
+		.volt_table = lp8788_dldo1011_vtbl,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.vsel_reg = LP8788_DLDO11_VOUT,
+		.vsel_mask = LP8788_VOUT_4BIT_M,
+		.enable_reg = LP8788_EN_LDO_B,
+		.enable_mask = LP8788_EN_DLDO11_M,
+	},
+	{
+		.name = "dldo12",
+		.id = DLDO12,
+		.ops = &lp8788_ldo_voltage_fixed_ops,
+		.n_voltages = 1,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.enable_reg = LP8788_EN_LDO_B,
+		.enable_mask = LP8788_EN_DLDO12_M,
+		.min_uV = 2500000,
+	},
+};
+
+static const struct regulator_desc lp8788_aldo_desc[] = {
+	{
+		.name = "aldo1",
+		.id = ALDO1,
+		.ops = &lp8788_ldo_voltage_table_ops,
+		.n_voltages = ARRAY_SIZE(lp8788_aldo1_vtbl),
+		.volt_table = lp8788_aldo1_vtbl,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.vsel_reg = LP8788_ALDO1_VOUT,
+		.vsel_mask = LP8788_VOUT_1BIT_M,
+		.enable_reg = LP8788_EN_LDO_B,
+		.enable_mask = LP8788_EN_ALDO1_M,
+	},
+	{
+		.name = "aldo2",
+		.id = ALDO2,
+		.ops = &lp8788_ldo_voltage_fixed_ops,
+		.n_voltages = 1,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.enable_reg = LP8788_EN_LDO_B,
+		.enable_mask = LP8788_EN_ALDO2_M,
+		.min_uV = 2850000,
+	},
+	{
+		.name = "aldo3",
+		.id = ALDO3,
+		.ops = &lp8788_ldo_voltage_fixed_ops,
+		.n_voltages = 1,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.enable_reg = LP8788_EN_LDO_B,
+		.enable_mask = LP8788_EN_ALDO3_M,
+		.min_uV = 2850000,
+	},
+	{
+		.name = "aldo4",
+		.id = ALDO4,
+		.ops = &lp8788_ldo_voltage_fixed_ops,
+		.n_voltages = 1,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.enable_reg = LP8788_EN_LDO_B,
+		.enable_mask = LP8788_EN_ALDO4_M,
+		.min_uV = 2850000,
+	},
+	{
+		.name = "aldo5",
+		.id = ALDO5,
+		.ops = &lp8788_ldo_voltage_fixed_ops,
+		.n_voltages = 1,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.enable_reg = LP8788_EN_LDO_C,
+		.enable_mask = LP8788_EN_ALDO5_M,
+		.min_uV = 2850000,
+	},
+	{
+		.name = "aldo6",
+		.id = ALDO6,
+		.ops = &lp8788_ldo_voltage_table_ops,
+		.n_voltages = ARRAY_SIZE(lp8788_dldo578_aldo6_vtbl),
+		.volt_table = lp8788_dldo578_aldo6_vtbl,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.vsel_reg = LP8788_ALDO6_VOUT,
+		.vsel_mask = LP8788_VOUT_4BIT_M,
+		.enable_reg = LP8788_EN_LDO_C,
+		.enable_mask = LP8788_EN_ALDO6_M,
+	},
+	{
+		.name = "aldo7",
+		.id = ALDO7,
+		.ops = &lp8788_ldo_voltage_table_ops,
+		.n_voltages = ARRAY_SIZE(lp8788_aldo7_vtbl),
+		.volt_table = lp8788_aldo7_vtbl,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.vsel_reg = LP8788_ALDO7_VOUT,
+		.vsel_mask = LP8788_VOUT_3BIT_M,
+		.enable_reg = LP8788_EN_LDO_C,
+		.enable_mask = LP8788_EN_ALDO7_M,
+	},
+	{
+		.name = "aldo8",
+		.id = ALDO8,
+		.ops = &lp8788_ldo_voltage_fixed_ops,
+		.n_voltages = 1,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.enable_reg = LP8788_EN_LDO_C,
+		.enable_mask = LP8788_EN_ALDO8_M,
+		.min_uV = 2500000,
+	},
+	{
+		.name = "aldo9",
+		.id = ALDO9,
+		.ops = &lp8788_ldo_voltage_fixed_ops,
+		.n_voltages = 1,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.enable_reg = LP8788_EN_LDO_C,
+		.enable_mask = LP8788_EN_ALDO9_M,
+		.min_uV = 2500000,
+	},
+	{
+		.name = "aldo10",
+		.id = ALDO10,
+		.ops = &lp8788_ldo_voltage_fixed_ops,
+		.n_voltages = 1,
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+		.enable_reg = LP8788_EN_LDO_C,
+		.enable_mask = LP8788_EN_ALDO10_M,
+		.min_uV = 1100000,
+	},
+};
+
+static int lp8788_config_ldo_enable_mode(struct platform_device *pdev,
+					struct lp8788_ldo *ldo,
+					enum lp8788_ldo_id id)
+{
+	struct lp8788 *lp = ldo->lp;
+	enum lp8788_ext_ldo_en_id enable_id;
+	static const u8 en_mask[] = {
+		[EN_ALDO1]   = LP8788_EN_SEL_ALDO1_M,
+		[EN_ALDO234] = LP8788_EN_SEL_ALDO234_M,
+		[EN_ALDO5]   = LP8788_EN_SEL_ALDO5_M,
+		[EN_ALDO7]   = LP8788_EN_SEL_ALDO7_M,
+		[EN_DLDO7]   = LP8788_EN_SEL_DLDO7_M,
+		[EN_DLDO911] = LP8788_EN_SEL_DLDO911_M,
+	};
+
+	switch (id) {
+	case DLDO7:
+		enable_id = EN_DLDO7;
+		break;
+	case DLDO9:
+	case DLDO11:
+		enable_id = EN_DLDO911;
+		break;
+	case ALDO1:
+		enable_id = EN_ALDO1;
+		break;
+	case ALDO2 ... ALDO4:
+		enable_id = EN_ALDO234;
+		break;
+	case ALDO5:
+		enable_id = EN_ALDO5;
+		break;
+	case ALDO7:
+		enable_id = EN_ALDO7;
+		break;
+	default:
+		return 0;
+	}
+
+	/*
+	 * Do not use devm* here: the regulator core takes over the
+	 * lifecycle management of the GPIO descriptor.
+	 * FIXME: check default mode for GPIO here: high or low?
+	 */
+	ldo->ena_gpiod = gpiod_get_index_optional(&pdev->dev,
+					       "enable",
+					       enable_id,
+					       GPIOD_OUT_HIGH |
+					       GPIOD_FLAGS_BIT_NONEXCLUSIVE);
+	if (IS_ERR(ldo->ena_gpiod))
+		return PTR_ERR(ldo->ena_gpiod);
+
+	/* if no GPIO for ldo pin, then set default enable mode */
+	if (!ldo->ena_gpiod)
+		goto set_default_ldo_enable_mode;
+
+	return 0;
+
+set_default_ldo_enable_mode:
+	return lp8788_update_bits(lp, LP8788_EN_SEL, en_mask[enable_id], 0);
+}
+
+static int lp8788_dldo_probe(struct platform_device *pdev)
+{
+	struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
+	int id = pdev->id;
+	struct lp8788_ldo *ldo;
+	struct regulator_config cfg = { };
+	struct regulator_dev *rdev;
+	int ret;
+
+	ldo = devm_kzalloc(&pdev->dev, sizeof(struct lp8788_ldo), GFP_KERNEL);
+	if (!ldo)
+		return -ENOMEM;
+
+	ldo->lp = lp;
+	ret = lp8788_config_ldo_enable_mode(pdev, ldo, id);
+	if (ret)
+		return ret;
+
+	if (ldo->ena_gpiod)
+		cfg.ena_gpiod = ldo->ena_gpiod;
+
+	cfg.dev = pdev->dev.parent;
+	cfg.init_data = lp->pdata ? lp->pdata->dldo_data[id] : NULL;
+	cfg.driver_data = ldo;
+	cfg.regmap = lp->regmap;
+
+	rdev = devm_regulator_register(&pdev->dev, &lp8788_dldo_desc[id], &cfg);
+	if (IS_ERR(rdev)) {
+		ret = PTR_ERR(rdev);
+		dev_err(&pdev->dev, "DLDO%d regulator register err = %d\n",
+				id + 1, ret);
+		return ret;
+	}
+
+	ldo->regulator = rdev;
+	platform_set_drvdata(pdev, ldo);
+
+	return 0;
+}
+
+static struct platform_driver lp8788_dldo_driver = {
+	.probe = lp8788_dldo_probe,
+	.driver = {
+		.name = LP8788_DEV_DLDO,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+};
+
+static int lp8788_aldo_probe(struct platform_device *pdev)
+{
+	struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
+	int id = pdev->id;
+	struct lp8788_ldo *ldo;
+	struct regulator_config cfg = { };
+	struct regulator_dev *rdev;
+	int ret;
+
+	ldo = devm_kzalloc(&pdev->dev, sizeof(struct lp8788_ldo), GFP_KERNEL);
+	if (!ldo)
+		return -ENOMEM;
+
+	ldo->lp = lp;
+	ret = lp8788_config_ldo_enable_mode(pdev, ldo, id + ALDO1);
+	if (ret)
+		return ret;
+
+	if (ldo->ena_gpiod)
+		cfg.ena_gpiod = ldo->ena_gpiod;
+
+	cfg.dev = pdev->dev.parent;
+	cfg.init_data = lp->pdata ? lp->pdata->aldo_data[id] : NULL;
+	cfg.driver_data = ldo;
+	cfg.regmap = lp->regmap;
+
+	rdev = devm_regulator_register(&pdev->dev, &lp8788_aldo_desc[id], &cfg);
+	if (IS_ERR(rdev)) {
+		ret = PTR_ERR(rdev);
+		dev_err(&pdev->dev, "ALDO%d regulator register err = %d\n",
+				id + 1, ret);
+		return ret;
+	}
+
+	ldo->regulator = rdev;
+	platform_set_drvdata(pdev, ldo);
+
+	return 0;
+}
+
+static struct platform_driver lp8788_aldo_driver = {
+	.probe = lp8788_aldo_probe,
+	.driver = {
+		.name = LP8788_DEV_ALDO,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+};
+
+static struct platform_driver * const drivers[] = {
+	&lp8788_dldo_driver,
+	&lp8788_aldo_driver,
+};
+
+static int __init lp8788_ldo_init(void)
+{
+	return platform_register_drivers(drivers, ARRAY_SIZE(drivers));
+}
+subsys_initcall(lp8788_ldo_init);
+
+static void __exit lp8788_ldo_exit(void)
+{
+	platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
+}
+module_exit(lp8788_ldo_exit);
+
+MODULE_DESCRIPTION("TI LP8788 LDO Driver");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lp8788-dldo");
+MODULE_ALIAS("platform:lp8788-aldo");