Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 316 insertions, 0 deletions

diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c
new file mode 100644
index 0000000000..90aa5b723c
--- /dev/null
+++ b/drivers/regulator/max1586.c
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * max1586.c  --  Voltage and current regulation for the Maxim 1586
+ *
+ * Copyright (C) 2008 Robert Jarzmik
+ */
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/slab.h>
+#include <linux/regulator/max1586.h>
+#include <linux/of_device.h>
+#include <linux/regulator/of_regulator.h>
+
+#define MAX1586_V3_MAX_VSEL 31
+#define MAX1586_V6_MAX_VSEL 3
+
+#define MAX1586_V3_MIN_UV   700000
+#define MAX1586_V3_MAX_UV  1475000
+
+#define MAX1586_V6_MIN_UV        0
+#define MAX1586_V6_MAX_UV  3000000
+
+#define I2C_V3_SELECT (0 << 5)
+#define I2C_V6_SELECT (1 << 5)
+
+struct max1586_data {
+	struct i2c_client *client;
+
+	/* min/max V3 voltage */
+	unsigned int min_uV;
+	unsigned int max_uV;
+
+	unsigned int v3_curr_sel;
+	unsigned int v6_curr_sel;
+};
+
+/*
+ * V6 voltage
+ * On I2C bus, sending a "x" byte to the max1586 means :
+ *   set V6 to either 0V, 1.8V, 2.5V, 3V depending on (x & 0x3)
+ * As regulator framework doesn't accept voltages to be 0V, we use 1uV.
+ */
+static const unsigned int v6_voltages_uv[] = { 1, 1800000, 2500000, 3000000 };
+
+/*
+ * V3 voltage
+ * On I2C bus, sending a "x" byte to the max1586 means :
+ *   set V3 to 0.700V + (x & 0x1f) * 0.025V
+ * This voltage can be increased by external resistors
+ * R24 and R25=100kOhm as described in the data sheet.
+ * The gain is approximately: 1 + R24/R25 + R24/185.5kOhm
+ */
+static int max1586_v3_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
+
+	return max1586->v3_curr_sel;
+}
+
+static int max1586_v3_set_voltage_sel(struct regulator_dev *rdev,
+				      unsigned selector)
+{
+	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
+	struct i2c_client *client = max1586->client;
+	int ret;
+	u8 v3_prog;
+
+	dev_dbg(&client->dev, "changing voltage v3 to %dmv\n",
+		regulator_list_voltage_linear(rdev, selector) / 1000);
+
+	v3_prog = I2C_V3_SELECT | (u8) selector;
+	ret = i2c_smbus_write_byte(client, v3_prog);
+	if (ret)
+		return ret;
+
+	max1586->v3_curr_sel = selector;
+
+	return 0;
+}
+
+static int max1586_v6_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
+
+	return max1586->v6_curr_sel;
+}
+
+static int max1586_v6_set_voltage_sel(struct regulator_dev *rdev,
+				      unsigned int selector)
+{
+	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
+	struct i2c_client *client = max1586->client;
+	u8 v6_prog;
+	int ret;
+
+	dev_dbg(&client->dev, "changing voltage v6 to %dmv\n",
+		rdev->desc->volt_table[selector] / 1000);
+
+	v6_prog = I2C_V6_SELECT | (u8) selector;
+	ret = i2c_smbus_write_byte(client, v6_prog);
+	if (ret)
+		return ret;
+
+	max1586->v6_curr_sel = selector;
+
+	return 0;
+}
+
+/*
+ * The Maxim 1586 controls V3 and V6 voltages, but offers no way of reading back
+ * the set up value.
+ */
+static const struct regulator_ops max1586_v3_ops = {
+	.get_voltage_sel = max1586_v3_get_voltage_sel,
+	.set_voltage_sel = max1586_v3_set_voltage_sel,
+	.list_voltage = regulator_list_voltage_linear,
+	.map_voltage = regulator_map_voltage_linear,
+};
+
+static const struct regulator_ops max1586_v6_ops = {
+	.get_voltage_sel = max1586_v6_get_voltage_sel,
+	.set_voltage_sel = max1586_v6_set_voltage_sel,
+	.list_voltage = regulator_list_voltage_table,
+};
+
+static struct regulator_desc max1586_reg[] = {
+	{
+		.name = "Output_V3",
+		.id = MAX1586_V3,
+		.ops = &max1586_v3_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = MAX1586_V3_MAX_VSEL + 1,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "Output_V6",
+		.id = MAX1586_V6,
+		.ops = &max1586_v6_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = MAX1586_V6_MAX_VSEL + 1,
+		.volt_table = v6_voltages_uv,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int of_get_max1586_platform_data(struct device *dev,
+				 struct max1586_platform_data *pdata)
+{
+	struct max1586_subdev_data *sub;
+	struct of_regulator_match rmatch[ARRAY_SIZE(max1586_reg)] = { };
+	struct device_node *np = dev->of_node;
+	int i, matched;
+
+	if (of_property_read_u32(np, "v3-gain",
+				 &pdata->v3_gain) < 0) {
+		dev_err(dev, "%pOF has no 'v3-gain' property\n", np);
+		return -EINVAL;
+	}
+
+	np = of_get_child_by_name(np, "regulators");
+	if (!np) {
+		dev_err(dev, "missing 'regulators' subnode in DT\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(rmatch); i++)
+		rmatch[i].name = max1586_reg[i].name;
+
+	matched = of_regulator_match(dev, np, rmatch, ARRAY_SIZE(rmatch));
+	of_node_put(np);
+	/*
+	 * If matched is 0, ie. neither Output_V3 nor Output_V6 have been found,
+	 * return 0, which signals the normal situation where no subregulator is
+	 * available. This is normal because the max1586 doesn't provide any
+	 * readback support, so the subregulators can't report any status
+	 * anyway.  If matched < 0, return the error.
+	 */
+	if (matched <= 0)
+		return matched;
+
+	pdata->subdevs = devm_kcalloc(dev,
+				      matched,
+				      sizeof(struct max1586_subdev_data),
+				      GFP_KERNEL);
+	if (!pdata->subdevs)
+		return -ENOMEM;
+
+	pdata->num_subdevs = matched;
+	sub = pdata->subdevs;
+
+	for (i = 0; i < matched; i++) {
+		sub->id = i;
+		sub->name = rmatch[i].of_node->name;
+		sub->platform_data = rmatch[i].init_data;
+		sub++;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id __maybe_unused max1586_of_match[] = {
+	{ .compatible = "maxim,max1586", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, max1586_of_match);
+
+static int max1586_pmic_probe(struct i2c_client *client)
+{
+	struct max1586_platform_data *pdata, pdata_of;
+	struct regulator_config config = { };
+	struct max1586_data *max1586;
+	int i, id, ret;
+	const struct of_device_id *match;
+
+	pdata = dev_get_platdata(&client->dev);
+	if (client->dev.of_node && !pdata) {
+		match = of_match_device(of_match_ptr(max1586_of_match),
+					&client->dev);
+		if (!match) {
+			dev_err(&client->dev, "Error: No device match found\n");
+			return -ENODEV;
+		}
+		ret = of_get_max1586_platform_data(&client->dev, &pdata_of);
+		if (ret < 0)
+			return ret;
+		pdata = &pdata_of;
+	}
+
+	max1586 = devm_kzalloc(&client->dev, sizeof(struct max1586_data),
+			GFP_KERNEL);
+	if (!max1586)
+		return -ENOMEM;
+
+	max1586->client = client;
+
+	if (!pdata->v3_gain)
+		return -EINVAL;
+
+	max1586->min_uV = MAX1586_V3_MIN_UV / 1000 * pdata->v3_gain / 1000;
+	max1586->max_uV = MAX1586_V3_MAX_UV / 1000 * pdata->v3_gain / 1000;
+
+	/* Set curr_sel to default voltage on power-up */
+	max1586->v3_curr_sel = 24; /* 1.3V */
+	max1586->v6_curr_sel = 0;
+
+	for (i = 0; i < pdata->num_subdevs && i <= MAX1586_V6; i++) {
+		struct regulator_dev *rdev;
+
+		id = pdata->subdevs[i].id;
+		if (!pdata->subdevs[i].platform_data)
+			continue;
+		if (id < MAX1586_V3 || id > MAX1586_V6) {
+			dev_err(&client->dev, "invalid regulator id %d\n", id);
+			return -EINVAL;
+		}
+
+		if (id == MAX1586_V3) {
+			max1586_reg[id].min_uV = max1586->min_uV;
+			max1586_reg[id].uV_step =
+					(max1586->max_uV - max1586->min_uV) /
+					MAX1586_V3_MAX_VSEL;
+		}
+
+		config.dev = &client->dev;
+		config.init_data = pdata->subdevs[i].platform_data;
+		config.driver_data = max1586;
+
+		rdev = devm_regulator_register(&client->dev,
+						  &max1586_reg[id], &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&client->dev, "failed to register %s\n",
+				max1586_reg[id].name);
+			return PTR_ERR(rdev);
+		}
+	}
+
+	i2c_set_clientdata(client, max1586);
+	dev_info(&client->dev, "Maxim 1586 regulator driver loaded\n");
+	return 0;
+}
+
+static const struct i2c_device_id max1586_id[] = {
+	{ "max1586", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max1586_id);
+
+static struct i2c_driver max1586_pmic_driver = {
+	.probe = max1586_pmic_probe,
+	.driver		= {
+		.name	= "max1586",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+		.of_match_table = of_match_ptr(max1586_of_match),
+	},
+	.id_table	= max1586_id,
+};
+
+static int __init max1586_pmic_init(void)
+{
+	return i2c_add_driver(&max1586_pmic_driver);
+}
+subsys_initcall(max1586_pmic_init);
+
+static void __exit max1586_pmic_exit(void)
+{
+	i2c_del_driver(&max1586_pmic_driver);
+}
+module_exit(max1586_pmic_exit);
+
+/* Module information */
+MODULE_DESCRIPTION("MAXIM 1586 voltage regulator driver");
+MODULE_AUTHOR("Robert Jarzmik");
+MODULE_LICENSE("GPL");