Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 529 insertions, 0 deletions

diff --git a/drivers/regulator/max8660.c b/drivers/regulator/max8660.c
new file mode 100644
index 0000000000..ede17099b7
--- /dev/null
+++ b/drivers/regulator/max8660.c
@@ -0,0 +1,529 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * max8660.c  --  Voltage regulation for the Maxim 8660/8661
+ *
+ * based on max1586.c and wm8400-regulator.c
+ *
+ * Copyright (C) 2009 Wolfram Sang, Pengutronix e.K.
+ *
+ * Some info:
+ *
+ * Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8660-MAX8661.pdf
+ *
+ * This chip is a bit nasty because it is a write-only device. Thus, the driver
+ * uses shadow registers to keep track of its values. The main problem appears
+ * to be the initialization: When Linux boots up, we cannot know if the chip is
+ * in the default state or not, so we would have to pass such information in
+ * platform_data. As this adds a bit of complexity to the driver, this is left
+ * out for now until it is really needed.
+ *
+ * [A|S|M]DTV1 registers are currently not used, but [A|S|M]DTV2.
+ *
+ * If the driver is feature complete, it might be worth to check if one set of
+ * functions for V3-V7 is sufficient. For maximum flexibility during
+ * development, they are separated for now.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/slab.h>
+#include <linux/regulator/max8660.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/of_regulator.h>
+
+#define MAX8660_DCDC_MIN_UV	 725000
+#define MAX8660_DCDC_MAX_UV	1800000
+#define MAX8660_DCDC_STEP	  25000
+#define MAX8660_DCDC_MAX_SEL	0x2b
+
+#define MAX8660_LDO5_MIN_UV	1700000
+#define MAX8660_LDO5_MAX_UV	2000000
+#define MAX8660_LDO5_STEP	  25000
+#define MAX8660_LDO5_MAX_SEL	0x0c
+
+#define MAX8660_LDO67_MIN_UV	1800000
+#define MAX8660_LDO67_MAX_UV	3300000
+#define MAX8660_LDO67_STEP	 100000
+#define MAX8660_LDO67_MAX_SEL	0x0f
+
+enum {
+	MAX8660_OVER1,
+	MAX8660_OVER2,
+	MAX8660_VCC1,
+	MAX8660_ADTV1,
+	MAX8660_ADTV2,
+	MAX8660_SDTV1,
+	MAX8660_SDTV2,
+	MAX8660_MDTV1,
+	MAX8660_MDTV2,
+	MAX8660_L12VCR,
+	MAX8660_FPWM,
+	MAX8660_N_REGS,	/* not a real register */
+};
+
+struct max8660 {
+	struct i2c_client *client;
+	u8 shadow_regs[MAX8660_N_REGS];		/* as chip is write only */
+};
+
+static int max8660_write(struct max8660 *max8660, u8 reg, u8 mask, u8 val)
+{
+	static const u8 max8660_addresses[MAX8660_N_REGS] = {
+	 0x10, 0x12, 0x20, 0x23, 0x24, 0x29, 0x2a, 0x32, 0x33, 0x39, 0x80
+	};
+
+	int ret;
+	u8 reg_val = (max8660->shadow_regs[reg] & mask) | val;
+
+	dev_vdbg(&max8660->client->dev, "Writing reg %02x with %02x\n",
+			max8660_addresses[reg], reg_val);
+
+	ret = i2c_smbus_write_byte_data(max8660->client,
+			max8660_addresses[reg], reg_val);
+	if (ret == 0)
+		max8660->shadow_regs[reg] = reg_val;
+
+	return ret;
+}
+
+
+/*
+ * DCDC functions
+ */
+
+static int max8660_dcdc_is_enabled(struct regulator_dev *rdev)
+{
+	struct max8660 *max8660 = rdev_get_drvdata(rdev);
+	u8 val = max8660->shadow_regs[MAX8660_OVER1];
+	u8 mask = (rdev_get_id(rdev) == MAX8660_V3) ? 1 : 4;
+
+	return !!(val & mask);
+}
+
+static int max8660_dcdc_enable(struct regulator_dev *rdev)
+{
+	struct max8660 *max8660 = rdev_get_drvdata(rdev);
+	u8 bit = (rdev_get_id(rdev) == MAX8660_V3) ? 1 : 4;
+
+	return max8660_write(max8660, MAX8660_OVER1, 0xff, bit);
+}
+
+static int max8660_dcdc_disable(struct regulator_dev *rdev)
+{
+	struct max8660 *max8660 = rdev_get_drvdata(rdev);
+	u8 mask = (rdev_get_id(rdev) == MAX8660_V3) ? ~1 : ~4;
+
+	return max8660_write(max8660, MAX8660_OVER1, mask, 0);
+}
+
+static int max8660_dcdc_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct max8660 *max8660 = rdev_get_drvdata(rdev);
+	u8 reg = (rdev_get_id(rdev) == MAX8660_V3) ? MAX8660_ADTV2 : MAX8660_SDTV2;
+	u8 selector = max8660->shadow_regs[reg];
+
+	return selector;
+}
+
+static int max8660_dcdc_set_voltage_sel(struct regulator_dev *rdev,
+					unsigned int selector)
+{
+	struct max8660 *max8660 = rdev_get_drvdata(rdev);
+	u8 reg, bits;
+	int ret;
+
+	reg = (rdev_get_id(rdev) == MAX8660_V3) ? MAX8660_ADTV2 : MAX8660_SDTV2;
+	ret = max8660_write(max8660, reg, 0, selector);
+	if (ret)
+		return ret;
+
+	/* Select target voltage register and activate regulation */
+	bits = (rdev_get_id(rdev) == MAX8660_V3) ? 0x03 : 0x30;
+	return max8660_write(max8660, MAX8660_VCC1, 0xff, bits);
+}
+
+static struct regulator_ops max8660_dcdc_ops = {
+	.is_enabled = max8660_dcdc_is_enabled,
+	.list_voltage = regulator_list_voltage_linear,
+	.map_voltage = regulator_map_voltage_linear,
+	.set_voltage_sel = max8660_dcdc_set_voltage_sel,
+	.get_voltage_sel = max8660_dcdc_get_voltage_sel,
+};
+
+
+/*
+ * LDO5 functions
+ */
+
+static int max8660_ldo5_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct max8660 *max8660 = rdev_get_drvdata(rdev);
+
+	u8 selector = max8660->shadow_regs[MAX8660_MDTV2];
+	return selector;
+}
+
+static int max8660_ldo5_set_voltage_sel(struct regulator_dev *rdev,
+					unsigned int selector)
+{
+	struct max8660 *max8660 = rdev_get_drvdata(rdev);
+	int ret;
+
+	ret = max8660_write(max8660, MAX8660_MDTV2, 0, selector);
+	if (ret)
+		return ret;
+
+	/* Select target voltage register and activate regulation */
+	return max8660_write(max8660, MAX8660_VCC1, 0xff, 0xc0);
+}
+
+static const struct regulator_ops max8660_ldo5_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.map_voltage = regulator_map_voltage_linear,
+	.set_voltage_sel = max8660_ldo5_set_voltage_sel,
+	.get_voltage_sel = max8660_ldo5_get_voltage_sel,
+};
+
+
+/*
+ * LDO67 functions
+ */
+
+static int max8660_ldo67_is_enabled(struct regulator_dev *rdev)
+{
+	struct max8660 *max8660 = rdev_get_drvdata(rdev);
+	u8 val = max8660->shadow_regs[MAX8660_OVER2];
+	u8 mask = (rdev_get_id(rdev) == MAX8660_V6) ? 2 : 4;
+
+	return !!(val & mask);
+}
+
+static int max8660_ldo67_enable(struct regulator_dev *rdev)
+{
+	struct max8660 *max8660 = rdev_get_drvdata(rdev);
+	u8 bit = (rdev_get_id(rdev) == MAX8660_V6) ? 2 : 4;
+
+	return max8660_write(max8660, MAX8660_OVER2, 0xff, bit);
+}
+
+static int max8660_ldo67_disable(struct regulator_dev *rdev)
+{
+	struct max8660 *max8660 = rdev_get_drvdata(rdev);
+	u8 mask = (rdev_get_id(rdev) == MAX8660_V6) ? ~2 : ~4;
+
+	return max8660_write(max8660, MAX8660_OVER2, mask, 0);
+}
+
+static int max8660_ldo67_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct max8660 *max8660 = rdev_get_drvdata(rdev);
+	u8 shift = (rdev_get_id(rdev) == MAX8660_V6) ? 0 : 4;
+	u8 selector = (max8660->shadow_regs[MAX8660_L12VCR] >> shift) & 0xf;
+
+	return selector;
+}
+
+static int max8660_ldo67_set_voltage_sel(struct regulator_dev *rdev,
+					 unsigned int selector)
+{
+	struct max8660 *max8660 = rdev_get_drvdata(rdev);
+
+	if (rdev_get_id(rdev) == MAX8660_V6)
+		return max8660_write(max8660, MAX8660_L12VCR, 0xf0, selector);
+	else
+		return max8660_write(max8660, MAX8660_L12VCR, 0x0f,
+				     selector << 4);
+}
+
+static const struct regulator_ops max8660_ldo67_ops = {
+	.is_enabled = max8660_ldo67_is_enabled,
+	.enable = max8660_ldo67_enable,
+	.disable = max8660_ldo67_disable,
+	.list_voltage = regulator_list_voltage_linear,
+	.map_voltage = regulator_map_voltage_linear,
+	.get_voltage_sel = max8660_ldo67_get_voltage_sel,
+	.set_voltage_sel = max8660_ldo67_set_voltage_sel,
+};
+
+static const struct regulator_desc max8660_reg[] = {
+	{
+		.name = "V3(DCDC)",
+		.id = MAX8660_V3,
+		.ops = &max8660_dcdc_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = MAX8660_DCDC_MAX_SEL + 1,
+		.owner = THIS_MODULE,
+		.min_uV = MAX8660_DCDC_MIN_UV,
+		.uV_step = MAX8660_DCDC_STEP,
+	},
+	{
+		.name = "V4(DCDC)",
+		.id = MAX8660_V4,
+		.ops = &max8660_dcdc_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = MAX8660_DCDC_MAX_SEL + 1,
+		.owner = THIS_MODULE,
+		.min_uV = MAX8660_DCDC_MIN_UV,
+		.uV_step = MAX8660_DCDC_STEP,
+	},
+	{
+		.name = "V5(LDO)",
+		.id = MAX8660_V5,
+		.ops = &max8660_ldo5_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = MAX8660_LDO5_MAX_SEL + 1,
+		.owner = THIS_MODULE,
+		.min_uV = MAX8660_LDO5_MIN_UV,
+		.uV_step = MAX8660_LDO5_STEP,
+	},
+	{
+		.name = "V6(LDO)",
+		.id = MAX8660_V6,
+		.ops = &max8660_ldo67_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = MAX8660_LDO67_MAX_SEL + 1,
+		.owner = THIS_MODULE,
+		.min_uV = MAX8660_LDO67_MIN_UV,
+		.uV_step = MAX8660_LDO67_STEP,
+	},
+	{
+		.name = "V7(LDO)",
+		.id = MAX8660_V7,
+		.ops = &max8660_ldo67_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = MAX8660_LDO67_MAX_SEL + 1,
+		.owner = THIS_MODULE,
+		.min_uV = MAX8660_LDO67_MIN_UV,
+		.uV_step = MAX8660_LDO67_STEP,
+	},
+};
+
+enum {
+	MAX8660 = 0,
+	MAX8661 = 1,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id max8660_dt_ids[] = {
+	{ .compatible = "maxim,max8660", .data = (void *) MAX8660 },
+	{ .compatible = "maxim,max8661", .data = (void *) MAX8661 },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max8660_dt_ids);
+
+static int max8660_pdata_from_dt(struct device *dev,
+				 struct device_node **of_node,
+				 struct max8660_platform_data *pdata)
+{
+	int matched, i;
+	struct device_node *np;
+	struct max8660_subdev_data *sub;
+	struct of_regulator_match rmatch[ARRAY_SIZE(max8660_reg)] = { };
+
+	np = of_get_child_by_name(dev->of_node, "regulators");
+	if (!np) {
+		dev_err(dev, "missing 'regulators' subnode in DT\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(rmatch); i++)
+		rmatch[i].name = max8660_reg[i].name;
+
+	matched = of_regulator_match(dev, np, rmatch, ARRAY_SIZE(rmatch));
+	of_node_put(np);
+	if (matched <= 0)
+		return matched;
+
+	pdata->subdevs = devm_kcalloc(dev,
+				      matched,
+				      sizeof(struct max8660_subdev_data),
+				      GFP_KERNEL);
+	if (!pdata->subdevs)
+		return -ENOMEM;
+
+	pdata->num_subdevs = matched;
+	sub = pdata->subdevs;
+
+	for (i = 0; i < matched; i++) {
+		sub->id = i;
+		sub->name = rmatch[i].name;
+		sub->platform_data = rmatch[i].init_data;
+		of_node[i] = rmatch[i].of_node;
+		sub++;
+	}
+
+	return 0;
+}
+#else
+static inline int max8660_pdata_from_dt(struct device *dev,
+					struct device_node **of_node,
+					struct max8660_platform_data *pdata)
+{
+	return 0;
+}
+#endif
+
+static int max8660_probe(struct i2c_client *client)
+{
+	const struct i2c_device_id *i2c_id = i2c_client_get_device_id(client);
+	struct device *dev = &client->dev;
+	struct max8660_platform_data pdata_of, *pdata = dev_get_platdata(dev);
+	struct regulator_config config = { };
+	struct max8660 *max8660;
+	int boot_on, i, id, ret = -EINVAL;
+	struct device_node *of_node[MAX8660_V_END];
+	unsigned long type;
+
+	if (dev->of_node && !pdata) {
+		const struct of_device_id *id;
+
+		id = of_match_device(of_match_ptr(max8660_dt_ids), dev);
+		if (!id)
+			return -ENODEV;
+
+		ret = max8660_pdata_from_dt(dev, of_node, &pdata_of);
+		if (ret < 0)
+			return ret;
+
+		pdata = &pdata_of;
+		type = (unsigned long) id->data;
+	} else {
+		type = i2c_id->driver_data;
+		memset(of_node, 0, sizeof(of_node));
+	}
+
+	if (pdata->num_subdevs > MAX8660_V_END) {
+		dev_err(dev, "Too many regulators found!\n");
+		return -EINVAL;
+	}
+
+	max8660 = devm_kzalloc(dev, sizeof(struct max8660), GFP_KERNEL);
+	if (!max8660)
+		return -ENOMEM;
+
+	max8660->client = client;
+
+	if (pdata->en34_is_high) {
+		/* Simulate always on */
+		max8660->shadow_regs[MAX8660_OVER1] = 5;
+	} else {
+		/* Otherwise devices can be toggled via software */
+		max8660_dcdc_ops.enable = max8660_dcdc_enable;
+		max8660_dcdc_ops.disable = max8660_dcdc_disable;
+	}
+
+	/*
+	 * First, set up shadow registers to prevent glitches. As some
+	 * registers are shared between regulators, everything must be properly
+	 * set up for all regulators in advance.
+	 */
+	max8660->shadow_regs[MAX8660_ADTV1] =
+		max8660->shadow_regs[MAX8660_ADTV2] =
+		max8660->shadow_regs[MAX8660_SDTV1] =
+		max8660->shadow_regs[MAX8660_SDTV2] = 0x1b;
+	max8660->shadow_regs[MAX8660_MDTV1] =
+		max8660->shadow_regs[MAX8660_MDTV2] = 0x04;
+
+	for (i = 0; i < pdata->num_subdevs; i++) {
+
+		if (!pdata->subdevs[i].platform_data)
+			boot_on = false;
+		else
+			boot_on = pdata->subdevs[i].platform_data->constraints.boot_on;
+
+		switch (pdata->subdevs[i].id) {
+		case MAX8660_V3:
+			if (boot_on)
+				max8660->shadow_regs[MAX8660_OVER1] |= 1;
+			break;
+
+		case MAX8660_V4:
+			if (boot_on)
+				max8660->shadow_regs[MAX8660_OVER1] |= 4;
+			break;
+
+		case MAX8660_V5:
+			break;
+
+		case MAX8660_V6:
+			if (boot_on)
+				max8660->shadow_regs[MAX8660_OVER2] |= 2;
+			break;
+
+		case MAX8660_V7:
+			if (type == MAX8661) {
+				dev_err(dev, "Regulator not on this chip!\n");
+				return -EINVAL;
+			}
+
+			if (boot_on)
+				max8660->shadow_regs[MAX8660_OVER2] |= 4;
+			break;
+
+		default:
+			dev_err(dev, "invalid regulator %s\n",
+				 pdata->subdevs[i].name);
+			return ret;
+		}
+	}
+
+	/* Finally register devices */
+	for (i = 0; i < pdata->num_subdevs; i++) {
+		struct regulator_dev *rdev;
+
+		id = pdata->subdevs[i].id;
+
+		config.dev = dev;
+		config.init_data = pdata->subdevs[i].platform_data;
+		config.of_node = of_node[i];
+		config.driver_data = max8660;
+
+		rdev = devm_regulator_register(&client->dev,
+						  &max8660_reg[id], &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&client->dev, "failed to register %s\n",
+				max8660_reg[id].name);
+			return PTR_ERR(rdev);
+		}
+	}
+
+	i2c_set_clientdata(client, max8660);
+	return 0;
+}
+
+static const struct i2c_device_id max8660_id[] = {
+	{ .name = "max8660", .driver_data = MAX8660 },
+	{ .name = "max8661", .driver_data = MAX8661 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max8660_id);
+
+static struct i2c_driver max8660_driver = {
+	.probe = max8660_probe,
+	.driver		= {
+		.name	= "max8660",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table	= max8660_id,
+};
+
+static int __init max8660_init(void)
+{
+	return i2c_add_driver(&max8660_driver);
+}
+subsys_initcall(max8660_init);
+
+static void __exit max8660_exit(void)
+{
+	i2c_del_driver(&max8660_driver);
+}
+module_exit(max8660_exit);
+
+/* Module information */
+MODULE_DESCRIPTION("MAXIM 8660/8661 voltage regulator driver");
+MODULE_AUTHOR("Wolfram Sang");
+MODULE_LICENSE("GPL v2");