diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/regulator/max8998.c | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/regulator/max8998.c')
-rw-r--r-- | drivers/regulator/max8998.c | 826 |
1 files changed, 826 insertions, 0 deletions
diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c new file mode 100644 index 0000000000..fadb471738 --- /dev/null +++ b/drivers/regulator/max8998.c @@ -0,0 +1,826 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// max8998.c - Voltage regulator driver for the Maxim 8998 +// +// Copyright (C) 2009-2010 Samsung Electronics +// Kyungmin Park <kyungmin.park@samsung.com> +// Marek Szyprowski <m.szyprowski@samsung.com> + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/of_regulator.h> +#include <linux/mfd/max8998.h> +#include <linux/mfd/max8998-private.h> + +struct max8998_data { + struct device *dev; + struct max8998_dev *iodev; + int num_regulators; + u8 buck1_vol[4]; /* voltages for selection */ + u8 buck2_vol[2]; + unsigned int buck1_idx; /* index to last changed voltage */ + /* value in a set */ + unsigned int buck2_idx; +}; + +static const unsigned int charger_current_table[] = { + 90000, 380000, 475000, 550000, 570000, 600000, 700000, 800000, +}; + +static int max8998_get_enable_register(struct regulator_dev *rdev, + int *reg, int *shift) +{ + int ldo = rdev_get_id(rdev); + + switch (ldo) { + case MAX8998_LDO2 ... MAX8998_LDO5: + *reg = MAX8998_REG_ONOFF1; + *shift = 3 - (ldo - MAX8998_LDO2); + break; + case MAX8998_LDO6 ... MAX8998_LDO13: + *reg = MAX8998_REG_ONOFF2; + *shift = 7 - (ldo - MAX8998_LDO6); + break; + case MAX8998_LDO14 ... MAX8998_LDO17: + *reg = MAX8998_REG_ONOFF3; + *shift = 7 - (ldo - MAX8998_LDO14); + break; + case MAX8998_BUCK1 ... MAX8998_BUCK4: + *reg = MAX8998_REG_ONOFF1; + *shift = 7 - (ldo - MAX8998_BUCK1); + break; + case MAX8998_EN32KHZ_AP ... MAX8998_ENVICHG: + *reg = MAX8998_REG_ONOFF4; + *shift = 7 - (ldo - MAX8998_EN32KHZ_AP); + break; + case MAX8998_ESAFEOUT1 ... MAX8998_ESAFEOUT2: + *reg = MAX8998_REG_CHGR2; + *shift = 7 - (ldo - MAX8998_ESAFEOUT1); + break; + case MAX8998_CHARGER: + *reg = MAX8998_REG_CHGR2; + *shift = 0; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int max8998_ldo_is_enabled(struct regulator_dev *rdev) +{ + struct max8998_data *max8998 = rdev_get_drvdata(rdev); + struct i2c_client *i2c = max8998->iodev->i2c; + int ret, reg, shift = 8; + u8 val; + + ret = max8998_get_enable_register(rdev, ®, &shift); + if (ret) + return ret; + + ret = max8998_read_reg(i2c, reg, &val); + if (ret) + return ret; + + return val & (1 << shift); +} + +static int max8998_ldo_is_enabled_inverted(struct regulator_dev *rdev) +{ + return (!max8998_ldo_is_enabled(rdev)); +} + +static int max8998_ldo_enable(struct regulator_dev *rdev) +{ + struct max8998_data *max8998 = rdev_get_drvdata(rdev); + struct i2c_client *i2c = max8998->iodev->i2c; + int reg, shift = 8, ret; + + ret = max8998_get_enable_register(rdev, ®, &shift); + if (ret) + return ret; + + return max8998_update_reg(i2c, reg, 1<<shift, 1<<shift); +} + +static int max8998_ldo_disable(struct regulator_dev *rdev) +{ + struct max8998_data *max8998 = rdev_get_drvdata(rdev); + struct i2c_client *i2c = max8998->iodev->i2c; + int reg, shift = 8, ret; + + ret = max8998_get_enable_register(rdev, ®, &shift); + if (ret) + return ret; + + return max8998_update_reg(i2c, reg, 0, 1<<shift); +} + +static int max8998_get_voltage_register(struct regulator_dev *rdev, + int *_reg, int *_shift, int *_mask) +{ + int ldo = rdev_get_id(rdev); + struct max8998_data *max8998 = rdev_get_drvdata(rdev); + int reg, shift = 0, mask = 0xff; + + switch (ldo) { + case MAX8998_LDO2 ... MAX8998_LDO3: + reg = MAX8998_REG_LDO2_LDO3; + mask = 0xf; + if (ldo == MAX8998_LDO2) + shift = 4; + else + shift = 0; + break; + case MAX8998_LDO4 ... MAX8998_LDO7: + reg = MAX8998_REG_LDO4 + (ldo - MAX8998_LDO4); + break; + case MAX8998_LDO8 ... MAX8998_LDO9: + reg = MAX8998_REG_LDO8_LDO9; + mask = 0xf; + if (ldo == MAX8998_LDO8) + shift = 4; + else + shift = 0; + break; + case MAX8998_LDO10 ... MAX8998_LDO11: + reg = MAX8998_REG_LDO10_LDO11; + if (ldo == MAX8998_LDO10) { + shift = 5; + mask = 0x7; + } else { + shift = 0; + mask = 0x1f; + } + break; + case MAX8998_LDO12 ... MAX8998_LDO17: + reg = MAX8998_REG_LDO12 + (ldo - MAX8998_LDO12); + break; + case MAX8998_BUCK1: + reg = MAX8998_REG_BUCK1_VOLTAGE1 + max8998->buck1_idx; + break; + case MAX8998_BUCK2: + reg = MAX8998_REG_BUCK2_VOLTAGE1 + max8998->buck2_idx; + break; + case MAX8998_BUCK3: + reg = MAX8998_REG_BUCK3; + break; + case MAX8998_BUCK4: + reg = MAX8998_REG_BUCK4; + break; + default: + return -EINVAL; + } + + *_reg = reg; + *_shift = shift; + *_mask = mask; + + return 0; +} + +static int max8998_get_voltage_sel(struct regulator_dev *rdev) +{ + struct max8998_data *max8998 = rdev_get_drvdata(rdev); + struct i2c_client *i2c = max8998->iodev->i2c; + int reg, shift = 0, mask, ret; + u8 val; + + ret = max8998_get_voltage_register(rdev, ®, &shift, &mask); + if (ret) + return ret; + + ret = max8998_read_reg(i2c, reg, &val); + if (ret) + return ret; + + val >>= shift; + val &= mask; + + return val; +} + +static int max8998_set_voltage_ldo_sel(struct regulator_dev *rdev, + unsigned selector) +{ + struct max8998_data *max8998 = rdev_get_drvdata(rdev); + struct i2c_client *i2c = max8998->iodev->i2c; + int reg, shift = 0, mask, ret; + + ret = max8998_get_voltage_register(rdev, ®, &shift, &mask); + if (ret) + return ret; + + ret = max8998_update_reg(i2c, reg, selector<<shift, mask<<shift); + + return ret; +} + +static inline void buck1_gpio_set(int gpio1, int gpio2, int v) +{ + gpio_set_value(gpio1, v & 0x1); + gpio_set_value(gpio2, (v >> 1) & 0x1); +} + +static inline void buck2_gpio_set(int gpio, int v) +{ + gpio_set_value(gpio, v & 0x1); +} + +static int max8998_set_voltage_buck_sel(struct regulator_dev *rdev, + unsigned selector) +{ + struct max8998_data *max8998 = rdev_get_drvdata(rdev); + struct max8998_platform_data *pdata = max8998->iodev->pdata; + struct i2c_client *i2c = max8998->iodev->i2c; + int buck = rdev_get_id(rdev); + int reg, shift = 0, mask, ret, j; + static u8 buck1_last_val; + + ret = max8998_get_voltage_register(rdev, ®, &shift, &mask); + if (ret) + return ret; + + switch (buck) { + case MAX8998_BUCK1: + dev_dbg(max8998->dev, + "BUCK1, selector:%d, buck1_vol1:%d, buck1_vol2:%d\n" + "buck1_vol3:%d, buck1_vol4:%d\n", + selector, max8998->buck1_vol[0], max8998->buck1_vol[1], + max8998->buck1_vol[2], max8998->buck1_vol[3]); + + if (gpio_is_valid(pdata->buck1_set1) && + gpio_is_valid(pdata->buck1_set2)) { + + /* check if requested voltage */ + /* value is already defined */ + for (j = 0; j < ARRAY_SIZE(max8998->buck1_vol); j++) { + if (max8998->buck1_vol[j] == selector) { + max8998->buck1_idx = j; + buck1_gpio_set(pdata->buck1_set1, + pdata->buck1_set2, j); + goto buck1_exit; + } + } + + if (pdata->buck_voltage_lock) + return -EINVAL; + + /* no predefine regulator found */ + max8998->buck1_idx = (buck1_last_val % 2) + 2; + dev_dbg(max8998->dev, "max8998->buck1_idx:%d\n", + max8998->buck1_idx); + max8998->buck1_vol[max8998->buck1_idx] = selector; + ret = max8998_get_voltage_register(rdev, ®, + &shift, + &mask); + ret = max8998_write_reg(i2c, reg, selector); + buck1_gpio_set(pdata->buck1_set1, + pdata->buck1_set2, max8998->buck1_idx); + buck1_last_val++; +buck1_exit: + dev_dbg(max8998->dev, "%s: SET1:%d, SET2:%d\n", + i2c->name, gpio_get_value(pdata->buck1_set1), + gpio_get_value(pdata->buck1_set2)); + break; + } else { + ret = max8998_write_reg(i2c, reg, selector); + } + break; + + case MAX8998_BUCK2: + dev_dbg(max8998->dev, + "BUCK2, selector:%d buck2_vol1:%d, buck2_vol2:%d\n", + selector, max8998->buck2_vol[0], max8998->buck2_vol[1]); + if (gpio_is_valid(pdata->buck2_set3)) { + + /* check if requested voltage */ + /* value is already defined */ + for (j = 0; j < ARRAY_SIZE(max8998->buck2_vol); j++) { + if (max8998->buck2_vol[j] == selector) { + max8998->buck2_idx = j; + buck2_gpio_set(pdata->buck2_set3, j); + goto buck2_exit; + } + } + + if (pdata->buck_voltage_lock) + return -EINVAL; + + max8998_get_voltage_register(rdev, + ®, &shift, &mask); + ret = max8998_write_reg(i2c, reg, selector); + max8998->buck2_vol[max8998->buck2_idx] = selector; + buck2_gpio_set(pdata->buck2_set3, max8998->buck2_idx); +buck2_exit: + dev_dbg(max8998->dev, "%s: SET3:%d\n", i2c->name, + gpio_get_value(pdata->buck2_set3)); + } else { + ret = max8998_write_reg(i2c, reg, selector); + } + break; + + case MAX8998_BUCK3: + case MAX8998_BUCK4: + ret = max8998_update_reg(i2c, reg, selector<<shift, + mask<<shift); + break; + } + + return ret; +} + +static int max8998_set_voltage_buck_time_sel(struct regulator_dev *rdev, + unsigned int old_selector, + unsigned int new_selector) +{ + struct max8998_data *max8998 = rdev_get_drvdata(rdev); + struct i2c_client *i2c = max8998->iodev->i2c; + int buck = rdev_get_id(rdev); + u8 val = 0; + int difference, ret; + + if (buck < MAX8998_BUCK1 || buck > MAX8998_BUCK4) + return -EINVAL; + + /* Voltage stabilization */ + ret = max8998_read_reg(i2c, MAX8998_REG_ONOFF4, &val); + if (ret) + return ret; + + /* lp3974 hasn't got ENRAMP bit - ramp is assumed as true */ + /* MAX8998 has ENRAMP bit implemented, so test it*/ + if (max8998->iodev->type == TYPE_MAX8998 && !(val & MAX8998_ENRAMP)) + return 0; + + difference = (new_selector - old_selector) * rdev->desc->uV_step / 1000; + if (difference > 0) + return DIV_ROUND_UP(difference, (val & 0x0f) + 1); + + return 0; +} + +static int max8998_set_current_limit(struct regulator_dev *rdev, + int min_uA, int max_uA) +{ + struct max8998_data *max8998 = rdev_get_drvdata(rdev); + struct i2c_client *i2c = max8998->iodev->i2c; + unsigned int n_currents = rdev->desc->n_current_limits; + int i, sel = -1; + + if (n_currents == 0) + return -EINVAL; + + if (rdev->desc->curr_table) { + const unsigned int *curr_table = rdev->desc->curr_table; + bool ascend = curr_table[n_currents - 1] > curr_table[0]; + + /* search for closest to maximum */ + if (ascend) { + for (i = n_currents - 1; i >= 0; i--) { + if (min_uA <= curr_table[i] && + curr_table[i] <= max_uA) { + sel = i; + break; + } + } + } else { + for (i = 0; i < n_currents; i++) { + if (min_uA <= curr_table[i] && + curr_table[i] <= max_uA) { + sel = i; + break; + } + } + } + } + + if (sel < 0) + return -EINVAL; + + sel <<= ffs(rdev->desc->csel_mask) - 1; + + return max8998_update_reg(i2c, rdev->desc->csel_reg, + sel, rdev->desc->csel_mask); +} + +static int max8998_get_current_limit(struct regulator_dev *rdev) +{ + struct max8998_data *max8998 = rdev_get_drvdata(rdev); + struct i2c_client *i2c = max8998->iodev->i2c; + u8 val; + int ret; + + ret = max8998_read_reg(i2c, rdev->desc->csel_reg, &val); + if (ret != 0) + return ret; + + val &= rdev->desc->csel_mask; + val >>= ffs(rdev->desc->csel_mask) - 1; + + if (rdev->desc->curr_table) { + if (val >= rdev->desc->n_current_limits) + return -EINVAL; + + return rdev->desc->curr_table[val]; + } + + return -EINVAL; +} + +static const struct regulator_ops max8998_ldo_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .is_enabled = max8998_ldo_is_enabled, + .enable = max8998_ldo_enable, + .disable = max8998_ldo_disable, + .get_voltage_sel = max8998_get_voltage_sel, + .set_voltage_sel = max8998_set_voltage_ldo_sel, +}; + +static const struct regulator_ops max8998_buck_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .is_enabled = max8998_ldo_is_enabled, + .enable = max8998_ldo_enable, + .disable = max8998_ldo_disable, + .get_voltage_sel = max8998_get_voltage_sel, + .set_voltage_sel = max8998_set_voltage_buck_sel, + .set_voltage_time_sel = max8998_set_voltage_buck_time_sel, +}; + +static const struct regulator_ops max8998_charger_ops = { + .set_current_limit = max8998_set_current_limit, + .get_current_limit = max8998_get_current_limit, + .is_enabled = max8998_ldo_is_enabled_inverted, + /* Swapped as register is inverted */ + .enable = max8998_ldo_disable, + .disable = max8998_ldo_enable, +}; + +static const struct regulator_ops max8998_others_ops = { + .is_enabled = max8998_ldo_is_enabled, + .enable = max8998_ldo_enable, + .disable = max8998_ldo_disable, +}; + +#define MAX8998_LINEAR_REG(_name, _ops, _min, _step, _max) \ + { \ + .name = #_name, \ + .id = MAX8998_##_name, \ + .ops = _ops, \ + .min_uV = (_min), \ + .uV_step = (_step), \ + .n_voltages = ((_max) - (_min)) / (_step) + 1, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + } + +#define MAX8998_CURRENT_REG(_name, _ops, _table, _reg, _mask) \ + { \ + .name = #_name, \ + .id = MAX8998_##_name, \ + .ops = _ops, \ + .curr_table = _table, \ + .n_current_limits = ARRAY_SIZE(_table), \ + .csel_reg = _reg, \ + .csel_mask = _mask, \ + .type = REGULATOR_CURRENT, \ + .owner = THIS_MODULE, \ + } + +#define MAX8998_OTHERS_REG(_name, _id) \ + { \ + .name = #_name, \ + .id = _id, \ + .ops = &max8998_others_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + } + +static const struct regulator_desc regulators[] = { + MAX8998_LINEAR_REG(LDO2, &max8998_ldo_ops, 800000, 50000, 1300000), + MAX8998_LINEAR_REG(LDO3, &max8998_ldo_ops, 800000, 50000, 1300000), + MAX8998_LINEAR_REG(LDO4, &max8998_ldo_ops, 1600000, 100000, 3600000), + MAX8998_LINEAR_REG(LDO5, &max8998_ldo_ops, 1600000, 100000, 3600000), + MAX8998_LINEAR_REG(LDO6, &max8998_ldo_ops, 1600000, 100000, 3600000), + MAX8998_LINEAR_REG(LDO7, &max8998_ldo_ops, 1600000, 100000, 3600000), + MAX8998_LINEAR_REG(LDO8, &max8998_ldo_ops, 3000000, 100000, 3600000), + MAX8998_LINEAR_REG(LDO9, &max8998_ldo_ops, 2800000, 100000, 3100000), + MAX8998_LINEAR_REG(LDO10, &max8998_ldo_ops, 950000, 50000, 1300000), + MAX8998_LINEAR_REG(LDO11, &max8998_ldo_ops, 1600000, 100000, 3600000), + MAX8998_LINEAR_REG(LDO12, &max8998_ldo_ops, 800000, 100000, 3300000), + MAX8998_LINEAR_REG(LDO13, &max8998_ldo_ops, 800000, 100000, 3300000), + MAX8998_LINEAR_REG(LDO14, &max8998_ldo_ops, 1200000, 100000, 3300000), + MAX8998_LINEAR_REG(LDO15, &max8998_ldo_ops, 1200000, 100000, 3300000), + MAX8998_LINEAR_REG(LDO16, &max8998_ldo_ops, 1600000, 100000, 3600000), + MAX8998_LINEAR_REG(LDO17, &max8998_ldo_ops, 1600000, 100000, 3600000), + MAX8998_LINEAR_REG(BUCK1, &max8998_buck_ops, 750000, 25000, 1525000), + MAX8998_LINEAR_REG(BUCK2, &max8998_buck_ops, 750000, 25000, 1525000), + MAX8998_LINEAR_REG(BUCK3, &max8998_buck_ops, 1600000, 100000, 3600000), + MAX8998_LINEAR_REG(BUCK4, &max8998_buck_ops, 800000, 100000, 2300000), + MAX8998_OTHERS_REG(EN32KHz-AP, MAX8998_EN32KHZ_AP), + MAX8998_OTHERS_REG(EN32KHz-CP, MAX8998_EN32KHZ_CP), + MAX8998_OTHERS_REG(ENVICHG, MAX8998_ENVICHG), + MAX8998_OTHERS_REG(ESAFEOUT1, MAX8998_ESAFEOUT1), + MAX8998_OTHERS_REG(ESAFEOUT2, MAX8998_ESAFEOUT2), + MAX8998_CURRENT_REG(CHARGER, &max8998_charger_ops, + charger_current_table, MAX8998_REG_CHGR1, 0x7), +}; + +static int max8998_pmic_dt_parse_dvs_gpio(struct max8998_dev *iodev, + struct max8998_platform_data *pdata, + struct device_node *pmic_np) +{ + int gpio; + + gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck1-dvs-gpios", 0); + if (!gpio_is_valid(gpio)) { + dev_err(iodev->dev, "invalid buck1 gpio[0]: %d\n", gpio); + return -EINVAL; + } + pdata->buck1_set1 = gpio; + + gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck1-dvs-gpios", 1); + if (!gpio_is_valid(gpio)) { + dev_err(iodev->dev, "invalid buck1 gpio[1]: %d\n", gpio); + return -EINVAL; + } + pdata->buck1_set2 = gpio; + + gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck2-dvs-gpio", 0); + if (!gpio_is_valid(gpio)) { + dev_err(iodev->dev, "invalid buck 2 gpio: %d\n", gpio); + return -EINVAL; + } + pdata->buck2_set3 = gpio; + + return 0; +} + +static int max8998_pmic_dt_parse_pdata(struct max8998_dev *iodev, + struct max8998_platform_data *pdata) +{ + struct device_node *pmic_np = iodev->dev->of_node; + struct device_node *regulators_np, *reg_np; + struct max8998_regulator_data *rdata; + unsigned int i; + int ret; + + regulators_np = of_get_child_by_name(pmic_np, "regulators"); + if (!regulators_np) { + dev_err(iodev->dev, "could not find regulators sub-node\n"); + return -EINVAL; + } + + /* count the number of regulators to be supported in pmic */ + pdata->num_regulators = of_get_child_count(regulators_np); + + rdata = devm_kcalloc(iodev->dev, + pdata->num_regulators, sizeof(*rdata), + GFP_KERNEL); + if (!rdata) { + of_node_put(regulators_np); + return -ENOMEM; + } + + pdata->regulators = rdata; + for (i = 0; i < ARRAY_SIZE(regulators); ++i) { + reg_np = of_get_child_by_name(regulators_np, + regulators[i].name); + if (!reg_np) + continue; + + rdata->id = regulators[i].id; + rdata->initdata = of_get_regulator_init_data(iodev->dev, + reg_np, + ®ulators[i]); + rdata->reg_node = reg_np; + ++rdata; + } + pdata->num_regulators = rdata - pdata->regulators; + + of_node_put(reg_np); + of_node_put(regulators_np); + + ret = max8998_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np); + if (ret) + return -EINVAL; + + pdata->buck_voltage_lock = of_property_read_bool(pmic_np, "max8998,pmic-buck-voltage-lock"); + + ret = of_property_read_u32(pmic_np, + "max8998,pmic-buck1-default-dvs-idx", + &pdata->buck1_default_idx); + if (!ret && pdata->buck1_default_idx >= 4) { + pdata->buck1_default_idx = 0; + dev_warn(iodev->dev, "invalid value for default dvs index, using 0 instead\n"); + } + + ret = of_property_read_u32(pmic_np, + "max8998,pmic-buck2-default-dvs-idx", + &pdata->buck2_default_idx); + if (!ret && pdata->buck2_default_idx >= 2) { + pdata->buck2_default_idx = 0; + dev_warn(iodev->dev, "invalid value for default dvs index, using 0 instead\n"); + } + + ret = of_property_read_u32_array(pmic_np, + "max8998,pmic-buck1-dvs-voltage", + pdata->buck1_voltage, + ARRAY_SIZE(pdata->buck1_voltage)); + if (ret) { + dev_err(iodev->dev, "buck1 voltages not specified\n"); + return -EINVAL; + } + + ret = of_property_read_u32_array(pmic_np, + "max8998,pmic-buck2-dvs-voltage", + pdata->buck2_voltage, + ARRAY_SIZE(pdata->buck2_voltage)); + if (ret) { + dev_err(iodev->dev, "buck2 voltages not specified\n"); + return -EINVAL; + } + + return 0; +} + +static int max8998_pmic_probe(struct platform_device *pdev) +{ + struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent); + struct max8998_platform_data *pdata = iodev->pdata; + struct regulator_config config = { }; + struct regulator_dev *rdev; + struct max8998_data *max8998; + struct i2c_client *i2c; + int i, ret; + unsigned int v; + + if (!pdata) { + dev_err(pdev->dev.parent, "No platform init data supplied\n"); + return -ENODEV; + } + + if (IS_ENABLED(CONFIG_OF) && iodev->dev->of_node) { + ret = max8998_pmic_dt_parse_pdata(iodev, pdata); + if (ret) + return ret; + } + + max8998 = devm_kzalloc(&pdev->dev, sizeof(struct max8998_data), + GFP_KERNEL); + if (!max8998) + return -ENOMEM; + + max8998->dev = &pdev->dev; + max8998->iodev = iodev; + max8998->num_regulators = pdata->num_regulators; + platform_set_drvdata(pdev, max8998); + i2c = max8998->iodev->i2c; + + max8998->buck1_idx = pdata->buck1_default_idx; + max8998->buck2_idx = pdata->buck2_default_idx; + + /* NOTE: */ + /* For unused GPIO NOT marked as -1 (thereof equal to 0) WARN_ON */ + /* will be displayed */ + + /* Check if MAX8998 voltage selection GPIOs are defined */ + if (gpio_is_valid(pdata->buck1_set1) && + gpio_is_valid(pdata->buck1_set2)) { + /* Check if SET1 is not equal to 0 */ + if (!pdata->buck1_set1) { + dev_err(&pdev->dev, + "MAX8998 SET1 GPIO defined as 0 !\n"); + WARN_ON(!pdata->buck1_set1); + return -EIO; + } + /* Check if SET2 is not equal to 0 */ + if (!pdata->buck1_set2) { + dev_err(&pdev->dev, + "MAX8998 SET2 GPIO defined as 0 !\n"); + WARN_ON(!pdata->buck1_set2); + return -EIO; + } + + gpio_request(pdata->buck1_set1, "MAX8998 BUCK1_SET1"); + gpio_direction_output(pdata->buck1_set1, + max8998->buck1_idx & 0x1); + + + gpio_request(pdata->buck1_set2, "MAX8998 BUCK1_SET2"); + gpio_direction_output(pdata->buck1_set2, + (max8998->buck1_idx >> 1) & 0x1); + + /* Set predefined values for BUCK1 registers */ + for (v = 0; v < ARRAY_SIZE(pdata->buck1_voltage); ++v) { + int index = MAX8998_BUCK1 - MAX8998_LDO2; + + i = 0; + while (regulators[index].min_uV + + regulators[index].uV_step * i + < pdata->buck1_voltage[v]) + i++; + + max8998->buck1_vol[v] = i; + ret = max8998_write_reg(i2c, + MAX8998_REG_BUCK1_VOLTAGE1 + v, i); + if (ret) + return ret; + } + } + + if (gpio_is_valid(pdata->buck2_set3)) { + /* Check if SET3 is not equal to 0 */ + if (!pdata->buck2_set3) { + dev_err(&pdev->dev, + "MAX8998 SET3 GPIO defined as 0 !\n"); + WARN_ON(!pdata->buck2_set3); + return -EIO; + } + gpio_request(pdata->buck2_set3, "MAX8998 BUCK2_SET3"); + gpio_direction_output(pdata->buck2_set3, + max8998->buck2_idx & 0x1); + + /* Set predefined values for BUCK2 registers */ + for (v = 0; v < ARRAY_SIZE(pdata->buck2_voltage); ++v) { + int index = MAX8998_BUCK2 - MAX8998_LDO2; + + i = 0; + while (regulators[index].min_uV + + regulators[index].uV_step * i + < pdata->buck2_voltage[v]) + i++; + + max8998->buck2_vol[v] = i; + ret = max8998_write_reg(i2c, + MAX8998_REG_BUCK2_VOLTAGE1 + v, i); + if (ret) + return ret; + } + } + + for (i = 0; i < pdata->num_regulators; i++) { + int index = pdata->regulators[i].id - MAX8998_LDO2; + + config.dev = max8998->dev; + config.of_node = pdata->regulators[i].reg_node; + config.init_data = pdata->regulators[i].initdata; + config.driver_data = max8998; + + rdev = devm_regulator_register(&pdev->dev, ®ulators[index], + &config); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); + dev_err(max8998->dev, "regulator %s init failed (%d)\n", + regulators[index].name, ret); + return ret; + } + } + + return 0; +} + +static const struct platform_device_id max8998_pmic_id[] = { + { "max8998-pmic", TYPE_MAX8998 }, + { "lp3974-pmic", TYPE_LP3974 }, + { } +}; +MODULE_DEVICE_TABLE(platform, max8998_pmic_id); + +static struct platform_driver max8998_pmic_driver = { + .driver = { + .name = "max8998-pmic", + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + }, + .probe = max8998_pmic_probe, + .id_table = max8998_pmic_id, +}; + +static int __init max8998_pmic_init(void) +{ + return platform_driver_register(&max8998_pmic_driver); +} +subsys_initcall(max8998_pmic_init); + +static void __exit max8998_pmic_cleanup(void) +{ + platform_driver_unregister(&max8998_pmic_driver); +} +module_exit(max8998_pmic_cleanup); + +MODULE_DESCRIPTION("MAXIM 8998 voltage regulator driver"); +MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>"); +MODULE_LICENSE("GPL"); |