Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 133 insertions, 0 deletions

diff --git a/drivers/regulator/rohm-regulator.c b/drivers/regulator/rohm-regulator.c
new file mode 100644
index 000000000..0e2418ed9
--- /dev/null
+++ b/drivers/regulator/rohm-regulator.c
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2020 ROHM Semiconductors
+
+#include <linux/errno.h>
+#include <linux/mfd/rohm-generic.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+static int set_dvs_level(const struct regulator_desc *desc,
+			 struct device_node *np, struct regmap *regmap,
+			 char *prop, unsigned int reg, unsigned int mask,
+			 unsigned int omask, unsigned int oreg)
+{
+	int ret, i;
+	uint32_t uv;
+
+	ret = of_property_read_u32(np, prop, &uv);
+	if (ret) {
+		if (ret != -EINVAL)
+			return ret;
+		return 0;
+	}
+	/* If voltage is set to 0 => disable */
+	if (uv == 0) {
+		if (omask)
+			return regmap_update_bits(regmap, oreg, omask, 0);
+	}
+	/* Some setups don't allow setting own voltage but do allow enabling */
+	if (!mask) {
+		if (omask)
+			return regmap_update_bits(regmap, oreg, omask, omask);
+
+		return -EINVAL;
+	}
+	for (i = 0; i < desc->n_voltages; i++) {
+		/* NOTE to next hacker - Does not support pickable ranges */
+		if (desc->linear_range_selectors_bitfield)
+			return -EINVAL;
+		if (desc->n_linear_ranges)
+			ret = regulator_desc_list_voltage_linear_range(desc, i);
+		else
+			ret = regulator_desc_list_voltage_linear(desc, i);
+		if (ret < 0)
+			continue;
+		if (ret == uv) {
+			i <<= ffs(desc->vsel_mask) - 1;
+			ret = regmap_update_bits(regmap, reg, mask, i);
+			if (omask && !ret)
+				ret = regmap_update_bits(regmap, oreg, omask,
+							 omask);
+			break;
+		}
+	}
+	return ret;
+}
+
+int rohm_regulator_set_dvs_levels(const struct rohm_dvs_config *dvs,
+			  struct device_node *np,
+			  const struct regulator_desc *desc,
+			  struct regmap *regmap)
+{
+	int i, ret = 0;
+	char *prop;
+	unsigned int reg, mask, omask, oreg = desc->enable_reg;
+
+	for (i = 0; i < ROHM_DVS_LEVEL_VALID_AMOUNT && !ret; i++) {
+		int bit;
+
+		bit = BIT(i);
+		if (dvs->level_map & bit) {
+			switch (bit) {
+			case ROHM_DVS_LEVEL_RUN:
+				prop = "rohm,dvs-run-voltage";
+				reg = dvs->run_reg;
+				mask = dvs->run_mask;
+				omask = dvs->run_on_mask;
+				break;
+			case ROHM_DVS_LEVEL_IDLE:
+				prop = "rohm,dvs-idle-voltage";
+				reg = dvs->idle_reg;
+				mask = dvs->idle_mask;
+				omask = dvs->idle_on_mask;
+				break;
+			case ROHM_DVS_LEVEL_SUSPEND:
+				prop = "rohm,dvs-suspend-voltage";
+				reg = dvs->suspend_reg;
+				mask = dvs->suspend_mask;
+				omask = dvs->suspend_on_mask;
+				break;
+			case ROHM_DVS_LEVEL_LPSR:
+				prop = "rohm,dvs-lpsr-voltage";
+				reg = dvs->lpsr_reg;
+				mask = dvs->lpsr_mask;
+				omask = dvs->lpsr_on_mask;
+				break;
+			case ROHM_DVS_LEVEL_SNVS:
+				prop = "rohm,dvs-snvs-voltage";
+				reg = dvs->snvs_reg;
+				mask = dvs->snvs_mask;
+				omask = dvs->snvs_on_mask;
+				break;
+			default:
+				return -EINVAL;
+			}
+			ret = set_dvs_level(desc, np, regmap, prop, reg, mask,
+					    omask, oreg);
+		}
+	}
+	return ret;
+}
+EXPORT_SYMBOL(rohm_regulator_set_dvs_levels);
+
+/*
+ * Few ROHM PMIC ICs have constrains on voltage changing:
+ * BD71837 - only buck 1-4 voltages can be changed when they are enabled.
+ * Other bucks and all LDOs must be disabled when voltage is changed.
+ * BD96801 - LDO voltage levels can be changed when LDOs are disabled.
+ */
+int rohm_regulator_set_voltage_sel_restricted(struct regulator_dev *rdev,
+					      unsigned int sel)
+{
+	if (rdev->desc->ops->is_enabled(rdev))
+		return -EBUSY;
+
+	return regulator_set_voltage_sel_regmap(rdev, sel);
+}
+EXPORT_SYMBOL_GPL(rohm_regulator_set_voltage_sel_restricted);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("Generic helpers for ROHM PMIC regulator drivers");