Merging upstream version 6.10.3.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 93 insertions, 91 deletions

diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx
index 4bc53eec4c..863f0932ef 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic79xx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx
@@ -8,79 +8,80 @@ config SCSI_AIC79XX
 	depends on PCI && HAS_IOPORT && SCSI
 	select SCSI_SPI_ATTRS
 	help
-	This driver supports all of Adaptec's Ultra 320 PCI-X
-	based SCSI controllers.
+	  This driver supports all of Adaptec's Ultra 320 PCI-X
+	  based SCSI controllers.
 
 config AIC79XX_CMDS_PER_DEVICE
 	int "Maximum number of TCQ commands per device"
 	depends on SCSI_AIC79XX
 	default "32"
 	help
-	Specify the number of commands you would like to allocate per SCSI
-	device when Tagged Command Queueing (TCQ) is enabled on that device.
+	  Specify the number of commands you would like to allocate per SCSI
+	  device when Tagged Command Queueing (TCQ) is enabled on that device.
 
-	This is an upper bound value for the number of tagged transactions
-	to be used for any device.  The aic7xxx driver will automatically
-	vary this number based on device behavior.  For devices with a
-	fixed maximum, the driver will eventually lock to this maximum
-	and display a console message indicating this value.
+	  This is an upper bound value for the number of tagged transactions
+	  to be used for any device.  The aic7xxx driver will automatically
+	  vary this number based on device behavior.  For devices with a
+	  fixed maximum, the driver will eventually lock to this maximum
+	  and display a console message indicating this value.
 
-	Due to resource allocation issues in the Linux SCSI mid-layer, using
-	a high number of commands per device may result in memory allocation
-	failures when many devices are attached to the system.  For this reason,
-	the default is set to 32.  Higher values may result in higher performance
-	on some devices.  The upper bound is 253.  0 disables tagged queueing.
+	  Due to resource allocation issues in the Linux SCSI mid-layer, using
+	  a high number of commands per device may result in memory allocation
+	  failures when many devices are attached to the system.  For this
+	  reason, the default is set to 32. Higher values may result in higher
+	  performance on some devices. The upper bound is 253. 0 disables
+	  tagged queueing.
 
-	Per device tag depth can be controlled via the kernel command line
-	"tag_info" option.  See Documentation/scsi/aic79xx.rst for details.
+	  Per device tag depth can be controlled via the kernel command line
+	  "tag_info" option.  See Documentation/scsi/aic79xx.rst for details.
 
 config AIC79XX_RESET_DELAY_MS
 	int "Initial bus reset delay in milli-seconds"
 	depends on SCSI_AIC79XX
 	default "5000"
 	help
-	The number of milliseconds to delay after an initial bus reset.
-	The bus settle delay following all error recovery actions is
-	dictated by the SCSI layer and is not affected by this value.
+	  The number of milliseconds to delay after an initial bus reset.
+	  The bus settle delay following all error recovery actions is
+	  dictated by the SCSI layer and is not affected by this value.
 
-	Default: 5000 (5 seconds)
+	  Default: 5000 (5 seconds)
 
 config AIC79XX_BUILD_FIRMWARE
 	bool "Build Adapter Firmware with Kernel Build"
 	depends on SCSI_AIC79XX && !PREVENT_FIRMWARE_BUILD
 	help
-	This option should only be enabled if you are modifying the firmware
-	source to the aic79xx driver and wish to have the generated firmware
-	include files updated during a normal kernel build.  The assembler
-	for the firmware requires lex and yacc or their equivalents, as well
-	as the db v1 library.  You may have to install additional packages
-	or modify the assembler Makefile or the files it includes if your
-	build environment is different than that of the author.
+	  This option should only be enabled if you are modifying the firmware
+	  source to the aic79xx driver and wish to have the generated firmware
+	  include files updated during a normal kernel build.  The assembler
+	  for the firmware requires lex and yacc or their equivalents, as well
+	  as the db v1 library.  You may have to install additional packages
+	  or modify the assembler Makefile or the files it includes if your
+	  build environment is different than that of the author.
 
 config AIC79XX_DEBUG_ENABLE
 	bool "Compile in Debugging Code"
 	depends on SCSI_AIC79XX
 	default y
 	help
-	Compile in aic79xx debugging code that can be useful in diagnosing
-	driver errors.
+	  Compile in aic79xx debugging code that can be useful in diagnosing
+	  driver errors.
 
 config AIC79XX_DEBUG_MASK
 	int "Debug code enable mask (16383 for all debugging)"
 	depends on SCSI_AIC79XX
 	default "0"
 	help
-	Bit mask of debug options that is only valid if the
-	CONFIG_AIC79XX_DEBUG_ENABLE option is enabled.  The bits in this mask
-	are defined in the drivers/scsi/aic7xxx/aic79xx.h - search for the
-	variable ahd_debug in that file to find them.
+	  Bit mask of debug options that is only valid if the
+	  CONFIG_AIC79XX_DEBUG_ENABLE option is enabled.  The bits in this mask
+	  are defined in the drivers/scsi/aic7xxx/aic79xx.h - search for the
+	  variable ahd_debug in that file to find them.
 
 config AIC79XX_REG_PRETTY_PRINT
 	bool "Decode registers during diagnostics"
 	depends on SCSI_AIC79XX
 	default y
 	help
-	Compile in register value tables for the output of expanded register
-	contents in diagnostics.  This make it much easier to understand debug
-	output without having to refer to a data book and/or the aic7xxx.reg
-	file.
+	  Compile in register value tables for the output of expanded register
+	  contents in diagnostics.  This make it much easier to understand debug
+	  output without having to refer to a data book and/or the aic7xxx.reg
+	  file.
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
index f0425145a5..8f87f2d8ba 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
@@ -8,84 +8,85 @@ config SCSI_AIC7XXX
 	depends on (PCI || EISA) && HAS_IOPORT && SCSI
 	select SCSI_SPI_ATTRS
 	help
-	This driver supports all of Adaptec's Fast through Ultra 160 PCI
-	based SCSI controllers as well as the aic7770 based EISA and VLB
-	SCSI controllers (the 274x and 284x series).  For AAA and ARO based
-	configurations, only SCSI functionality is provided.
+	  This driver supports all of Adaptec's Fast through Ultra 160 PCI
+	  based SCSI controllers as well as the aic7770 based EISA and VLB
+	  SCSI controllers (the 274x and 284x series).  For AAA and ARO based
+	  configurations, only SCSI functionality is provided.
 
-	To compile this driver as a module, choose M here: the
-	module will be called aic7xxx.
+	  To compile this driver as a module, choose M here: the
+	  module will be called aic7xxx.
 
 config AIC7XXX_CMDS_PER_DEVICE
 	int "Maximum number of TCQ commands per device"
 	depends on SCSI_AIC7XXX
 	default "32"
 	help
-	Specify the number of commands you would like to allocate per SCSI
-	device when Tagged Command Queueing (TCQ) is enabled on that device.
+	  Specify the number of commands you would like to allocate per SCSI
+	  device when Tagged Command Queueing (TCQ) is enabled on that device.
 
-	This is an upper bound value for the number of tagged transactions
-	to be used for any device.  The aic7xxx driver will automatically
-	vary this number based on device behavior.  For devices with a
-	fixed maximum, the driver will eventually lock to this maximum
-	and display a console message indicating this value.
+	  This is an upper bound value for the number of tagged transactions
+	  to be used for any device.  The aic7xxx driver will automatically
+	  vary this number based on device behavior.  For devices with a
+	  fixed maximum, the driver will eventually lock to this maximum
+	  and display a console message indicating this value.
 
-	Due to resource allocation issues in the Linux SCSI mid-layer, using
-	a high number of commands per device may result in memory allocation
-	failures when many devices are attached to the system.  For this reason,
-	the default is set to 32.  Higher values may result in higher performance
-	on some devices.  The upper bound is 253.  0 disables tagged queueing.
+	  Due to resource allocation issues in the Linux SCSI mid-layer, using
+	  a high number of commands per device may result in memory allocation
+	  failures when many devices are attached to the system.  For this
+	  reason, the default is set to 32.  Higher values may result in higher
+	  performance on some devices. The upper bound is 253. 0 disables tagged
+	  queueing.
 
-	Per device tag depth can be controlled via the kernel command line
-	"tag_info" option.  See Documentation/scsi/aic7xxx.rst for details.
+	  Per device tag depth can be controlled via the kernel command line
+	  "tag_info" option.  See Documentation/scsi/aic7xxx.rst for details.
 
 config AIC7XXX_RESET_DELAY_MS
 	int "Initial bus reset delay in milli-seconds"
 	depends on SCSI_AIC7XXX
 	default "5000"
 	help
-	The number of milliseconds to delay after an initial bus reset.
-	The bus settle delay following all error recovery actions is
-	dictated by the SCSI layer and is not affected by this value.
+	  The number of milliseconds to delay after an initial bus reset.
+	  The bus settle delay following all error recovery actions is
+	  dictated by the SCSI layer and is not affected by this value.
 
-	Default: 5000 (5 seconds)
+	  Default: 5000 (5 seconds)
 
 config AIC7XXX_BUILD_FIRMWARE
 	bool "Build Adapter Firmware with Kernel Build"
 	depends on SCSI_AIC7XXX && !PREVENT_FIRMWARE_BUILD
 	help
-	This option should only be enabled if you are modifying the firmware
-	source to the aic7xxx driver and wish to have the generated firmware
-	include files updated during a normal kernel build.  The assembler
-	for the firmware requires lex and yacc or their equivalents, as well
-	as the db v1 library.  You may have to install additional packages
-	or modify the assembler Makefile or the files it includes if your
-	build environment is different than that of the author.
+	  This option should only be enabled if you are modifying the firmware
+	  source to the aic7xxx driver and wish to have the generated firmware
+	  include files updated during a normal kernel build.  The assembler
+	  for the firmware requires lex and yacc or their equivalents, as well
+	  as the db v1 library.  You may have to install additional packages
+	  or modify the assembler Makefile or the files it includes if your
+	  build environment is different than that of the author.
 
 config AIC7XXX_DEBUG_ENABLE
 	bool "Compile in Debugging Code"
 	depends on SCSI_AIC7XXX
 	default y
 	help
-	Compile in aic7xxx debugging code that can be useful in diagnosing
-	driver errors.
+	  Compile in aic7xxx debugging code that can be useful in diagnosing
+	  driver errors.
 
 config AIC7XXX_DEBUG_MASK
-        int "Debug code enable mask (2047 for all debugging)"
-        depends on SCSI_AIC7XXX
-        default "0"
-        help
-	Bit mask of debug options that is only valid if the
-	CONFIG_AIC7XXX_DEBUG_ENABLE option is enabled.  The bits in this mask
-	are defined in the drivers/scsi/aic7xxx/aic7xxx.h - search for the
-	variable ahc_debug in that file to find them.
+	int "Debug code enable mask (2047 for all debugging)"
+	depends on SCSI_AIC7XXX
+	default "0"
+	help
+	  Bit mask of debug options that is only valid if the
+	  CONFIG_AIC7XXX_DEBUG_ENABLE option is enabled.  The bits in this mask
+	  are defined in the drivers/scsi/aic7xxx/aic7xxx.h - search for the
+	  variable ahc_debug in that file to find them.
 
 config AIC7XXX_REG_PRETTY_PRINT
-        bool "Decode registers during diagnostics"
-        depends on SCSI_AIC7XXX
+	bool "Decode registers during diagnostics"
+	depends on SCSI_AIC7XXX
 	default y
-        help
-	Compile in register value tables for the output of expanded register
-	contents in diagnostics.  This make it much easier to understand debug
-	output without having to refer to a data book and/or the aic7xxx.reg
-	file.
+	help
+	  Compile in register value tables for the output of expanded register
+	  contents in diagnostics.  This make it much easier to understand debug
+	  output without having to refer to a data book and/or the aic7xxx.reg
+	  file.
diff --git a/drivers/scsi/aic7xxx/Makefile b/drivers/scsi/aic7xxx/Makefile
index e0188ecd85..853c72a81a 100644
--- a/drivers/scsi/aic7xxx/Makefile
+++ b/drivers/scsi/aic7xxx/Makefile
@@ -55,9 +55,9 @@ aicasm-7xxx-opts-$(CONFIG_AIC7XXX_REG_PRETTY_PRINT) := \
 
 ifeq ($(CONFIG_AIC7XXX_BUILD_FIRMWARE),y)
 $(obj)/aic7xxx_seq.h: $(src)/aic7xxx.seq $(src)/aic7xxx.reg $(obj)/aicasm/aicasm
-	$(obj)/aicasm/aicasm -I$(srctree)/$(src) -r $(obj)/aic7xxx_reg.h \
+	$(obj)/aicasm/aicasm -I $(src) -r $(obj)/aic7xxx_reg.h \
 			      $(aicasm-7xxx-opts-y) -o $(obj)/aic7xxx_seq.h \
-			      $(srctree)/$(src)/aic7xxx.seq
+			      $(src)/aic7xxx.seq
 
 $(aic7xxx-gen-y): $(objtree)/$(obj)/aic7xxx_seq.h
 	@true
@@ -73,9 +73,9 @@ aicasm-79xx-opts-$(CONFIG_AIC79XX_REG_PRETTY_PRINT) := \
 
 ifeq ($(CONFIG_AIC79XX_BUILD_FIRMWARE),y)
 $(obj)/aic79xx_seq.h: $(src)/aic79xx.seq $(src)/aic79xx.reg $(obj)/aicasm/aicasm
-	$(obj)/aicasm/aicasm -I$(srctree)/$(src) -r $(obj)/aic79xx_reg.h \
+	$(obj)/aicasm/aicasm -I $(src) -r $(obj)/aic79xx_reg.h \
 			      $(aicasm-79xx-opts-y) -o $(obj)/aic79xx_seq.h \
-			      $(srctree)/$(src)/aic79xx.seq
+			      $(src)/aic79xx.seq
 
 $(aic79xx-gen-y): $(objtree)/$(obj)/aic79xx_seq.h
 	@true
@@ -83,5 +83,5 @@ else
 $(obj)/aic79xx_reg_print.c: $(src)/aic79xx_reg_print.c_shipped
 endif
 
-$(obj)/aicasm/aicasm: $(srctree)/$(src)/aicasm/*.[chyl]
-	$(MAKE) -C $(srctree)/$(src)/aicasm OUTDIR=$(shell pwd)/$(obj)/aicasm/
+$(obj)/aicasm/aicasm: $(src)/aicasm/*.[chyl]
+	$(MAKE) -C $(src)/aicasm OUTDIR=$(shell pwd)/$(obj)/aicasm/