Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 781 insertions, 0 deletions

diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
new file mode 100644
index 0000000000..c514b20293
--- /dev/null
+++ b/drivers/scsi/isci/task.c
@@ -0,0 +1,781 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/completion.h>
+#include <linux/irqflags.h>
+#include "sas.h"
+#include <scsi/libsas.h>
+#include "remote_device.h"
+#include "remote_node_context.h"
+#include "isci.h"
+#include "request.h"
+#include "task.h"
+#include "host.h"
+
+/**
+* isci_task_refuse() - complete the request to the upper layer driver in
+*     the case where an I/O needs to be completed back in the submit path.
+* @ihost: host on which the the request was queued
+* @task: request to complete
+* @response: response code for the completed task.
+* @status: status code for the completed task.
+*
+*/
+static void isci_task_refuse(struct isci_host *ihost, struct sas_task *task,
+			     enum service_response response,
+			     enum exec_status status)
+
+{
+	unsigned long flags;
+
+	/* Normal notification (task_done) */
+	dev_dbg(&ihost->pdev->dev, "%s: task = %p, response=%d, status=%d\n",
+		__func__, task, response, status);
+
+	spin_lock_irqsave(&task->task_state_lock, flags);
+
+	task->task_status.resp = response;
+	task->task_status.stat = status;
+
+	/* Normal notification (task_done) */
+	task->task_state_flags |= SAS_TASK_STATE_DONE;
+	task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+	task->lldd_task = NULL;
+	spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+	task->task_done(task);
+}
+
+#define for_each_sas_task(num, task) \
+	for (; num > 0; num--,\
+	     task = list_entry(task->list.next, struct sas_task, list))
+
+
+static inline int isci_device_io_ready(struct isci_remote_device *idev,
+				       struct sas_task *task)
+{
+	return idev ? test_bit(IDEV_IO_READY, &idev->flags) ||
+		      (test_bit(IDEV_IO_NCQERROR, &idev->flags) &&
+		       isci_task_is_ncq_recovery(task))
+		    : 0;
+}
+/**
+ * isci_task_execute_task() - This function is one of the SAS Domain Template
+ *    functions. This function is called by libsas to send a task down to
+ *    hardware.
+ * @task: This parameter specifies the SAS task to send.
+ * @gfp_flags: This parameter specifies the context of this call.
+ *
+ * status, zero indicates success.
+ */
+int isci_task_execute_task(struct sas_task *task, gfp_t gfp_flags)
+{
+	struct isci_host *ihost = dev_to_ihost(task->dev);
+	struct isci_remote_device *idev;
+	unsigned long flags;
+	enum sci_status status = SCI_FAILURE;
+	bool io_ready;
+	u16 tag;
+
+	spin_lock_irqsave(&ihost->scic_lock, flags);
+	idev = isci_lookup_device(task->dev);
+	io_ready = isci_device_io_ready(idev, task);
+	tag = isci_alloc_tag(ihost);
+	spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+	dev_dbg(&ihost->pdev->dev,
+		"task: %p, dev: %p idev: %p:%#lx cmd = %p\n",
+		task, task->dev, idev, idev ? idev->flags : 0,
+		task->uldd_task);
+
+	if (!idev) {
+		isci_task_refuse(ihost, task, SAS_TASK_UNDELIVERED,
+				 SAS_DEVICE_UNKNOWN);
+	} else if (!io_ready || tag == SCI_CONTROLLER_INVALID_IO_TAG) {
+		/* Indicate QUEUE_FULL so that the scsi midlayer
+		 * retries.
+		  */
+		isci_task_refuse(ihost, task, SAS_TASK_COMPLETE,
+				 SAS_QUEUE_FULL);
+	} else {
+		/* There is a device and it's ready for I/O. */
+		spin_lock_irqsave(&task->task_state_lock, flags);
+
+		if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
+			/* The I/O was aborted. */
+			spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+			isci_task_refuse(ihost, task,
+					 SAS_TASK_UNDELIVERED,
+					 SAS_SAM_STAT_TASK_ABORTED);
+		} else {
+			struct isci_request *ireq;
+
+			/* do common allocation and init of request object. */
+			ireq = isci_io_request_from_tag(ihost, task, tag);
+			spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+			/* build and send the request. */
+			/* do common allocation and init of request object. */
+			status = isci_request_execute(ihost, idev, task, ireq);
+
+			if (status != SCI_SUCCESS) {
+				if (test_bit(IDEV_GONE, &idev->flags)) {
+					/* Indicate that the device
+					 * is gone.
+					 */
+					isci_task_refuse(ihost, task,
+						SAS_TASK_UNDELIVERED,
+						SAS_DEVICE_UNKNOWN);
+				} else {
+					/* Indicate QUEUE_FULL so that
+					 * the scsi midlayer retries.
+					 * If the request failed for
+					 * remote device reasons, it
+					 * gets returned as
+					 * SAS_TASK_UNDELIVERED next
+					 * time through.
+					 */
+					isci_task_refuse(ihost, task,
+						SAS_TASK_COMPLETE,
+						SAS_QUEUE_FULL);
+				}
+			}
+		}
+	}
+
+	if (status != SCI_SUCCESS && tag != SCI_CONTROLLER_INVALID_IO_TAG) {
+		spin_lock_irqsave(&ihost->scic_lock, flags);
+		/* command never hit the device, so just free
+		 * the tci and skip the sequence increment
+		 */
+		isci_tci_free(ihost, ISCI_TAG_TCI(tag));
+		spin_unlock_irqrestore(&ihost->scic_lock, flags);
+	}
+
+	isci_put_device(idev);
+	return 0;
+}
+
+static struct isci_request *isci_task_request_build(struct isci_host *ihost,
+						    struct isci_remote_device *idev,
+						    u16 tag, struct isci_tmf *isci_tmf)
+{
+	enum sci_status status = SCI_FAILURE;
+	struct isci_request *ireq = NULL;
+	struct domain_device *dev;
+
+	dev_dbg(&ihost->pdev->dev,
+		"%s: isci_tmf = %p\n", __func__, isci_tmf);
+
+	dev = idev->domain_dev;
+
+	/* do common allocation and init of request object. */
+	ireq = isci_tmf_request_from_tag(ihost, isci_tmf, tag);
+	if (!ireq)
+		return NULL;
+
+	/* let the core do it's construct. */
+	status = sci_task_request_construct(ihost, idev, tag,
+					     ireq);
+
+	if (status != SCI_SUCCESS) {
+		dev_warn(&ihost->pdev->dev,
+			 "%s: sci_task_request_construct failed - "
+			 "status = 0x%x\n",
+			 __func__,
+			 status);
+		return NULL;
+	}
+
+	/* XXX convert to get this from task->tproto like other drivers */
+	if (dev->dev_type == SAS_END_DEVICE) {
+		isci_tmf->proto = SAS_PROTOCOL_SSP;
+		status = sci_task_request_construct_ssp(ireq);
+		if (status != SCI_SUCCESS)
+			return NULL;
+	}
+
+	return ireq;
+}
+
+static int isci_task_execute_tmf(struct isci_host *ihost,
+				 struct isci_remote_device *idev,
+				 struct isci_tmf *tmf, unsigned long timeout_ms)
+{
+	DECLARE_COMPLETION_ONSTACK(completion);
+	enum sci_status status = SCI_FAILURE;
+	struct isci_request *ireq;
+	int ret = TMF_RESP_FUNC_FAILED;
+	unsigned long flags;
+	unsigned long timeleft;
+	u16 tag;
+
+	spin_lock_irqsave(&ihost->scic_lock, flags);
+	tag = isci_alloc_tag(ihost);
+	spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+	if (tag == SCI_CONTROLLER_INVALID_IO_TAG)
+		return ret;
+
+	/* sanity check, return TMF_RESP_FUNC_FAILED
+	 * if the device is not there and ready.
+	 */
+	if (!idev ||
+	    (!test_bit(IDEV_IO_READY, &idev->flags) &&
+	     !test_bit(IDEV_IO_NCQERROR, &idev->flags))) {
+		dev_dbg(&ihost->pdev->dev,
+			"%s: idev = %p not ready (%#lx)\n",
+			__func__,
+			idev, idev ? idev->flags : 0);
+		goto err_tci;
+	} else
+		dev_dbg(&ihost->pdev->dev,
+			"%s: idev = %p\n",
+			__func__, idev);
+
+	/* Assign the pointer to the TMF's completion kernel wait structure. */
+	tmf->complete = &completion;
+	tmf->status = SCI_FAILURE_TIMEOUT;
+
+	ireq = isci_task_request_build(ihost, idev, tag, tmf);
+	if (!ireq)
+		goto err_tci;
+
+	spin_lock_irqsave(&ihost->scic_lock, flags);
+
+	/* start the TMF io. */
+	status = sci_controller_start_task(ihost, idev, ireq);
+
+	if (status != SCI_SUCCESS) {
+		dev_dbg(&ihost->pdev->dev,
+			 "%s: start_io failed - status = 0x%x, request = %p\n",
+			 __func__,
+			 status,
+			 ireq);
+		spin_unlock_irqrestore(&ihost->scic_lock, flags);
+		goto err_tci;
+	}
+	spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+	/* The RNC must be unsuspended before the TMF can get a response. */
+	isci_remote_device_resume_from_abort(ihost, idev);
+
+	/* Wait for the TMF to complete, or a timeout. */
+	timeleft = wait_for_completion_timeout(&completion,
+					       msecs_to_jiffies(timeout_ms));
+
+	if (timeleft == 0) {
+		/* The TMF did not complete - this could be because
+		 * of an unplug.  Terminate the TMF request now.
+		 */
+		isci_remote_device_suspend_terminate(ihost, idev, ireq);
+	}
+
+	isci_print_tmf(ihost, tmf);
+
+	if (tmf->status == SCI_SUCCESS)
+		ret =  TMF_RESP_FUNC_COMPLETE;
+	else if (tmf->status == SCI_FAILURE_IO_RESPONSE_VALID) {
+		dev_dbg(&ihost->pdev->dev,
+			"%s: tmf.status == "
+			"SCI_FAILURE_IO_RESPONSE_VALID\n",
+			__func__);
+		ret =  TMF_RESP_FUNC_COMPLETE;
+	}
+	/* Else - leave the default "failed" status alone. */
+
+	dev_dbg(&ihost->pdev->dev,
+		"%s: completed request = %p\n",
+		__func__,
+		ireq);
+
+	return ret;
+
+ err_tci:
+	spin_lock_irqsave(&ihost->scic_lock, flags);
+	isci_tci_free(ihost, ISCI_TAG_TCI(tag));
+	spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+	return ret;
+}
+
+static void isci_task_build_tmf(struct isci_tmf *tmf,
+				enum isci_tmf_function_codes code)
+{
+	memset(tmf, 0, sizeof(*tmf));
+	tmf->tmf_code = code;
+}
+
+static void isci_task_build_abort_task_tmf(struct isci_tmf *tmf,
+					   enum isci_tmf_function_codes code,
+					   struct isci_request *old_request)
+{
+	isci_task_build_tmf(tmf, code);
+	tmf->io_tag = old_request->io_tag;
+}
+
+/*
+ * isci_task_send_lu_reset_sas() - This function is called by of the SAS Domain
+ *    Template functions.
+ * @lun: This parameter specifies the lun to be reset.
+ *
+ * status, zero indicates success.
+ */
+static int isci_task_send_lu_reset_sas(
+	struct isci_host *isci_host,
+	struct isci_remote_device *isci_device,
+	u8 *lun)
+{
+	struct isci_tmf tmf;
+	int ret = TMF_RESP_FUNC_FAILED;
+
+	dev_dbg(&isci_host->pdev->dev,
+		"%s: isci_host = %p, isci_device = %p\n",
+		__func__, isci_host, isci_device);
+	/* Send the LUN reset to the target.  By the time the call returns,
+	 * the TMF has fully exected in the target (in which case the return
+	 * value is "TMF_RESP_FUNC_COMPLETE", or the request timed-out (or
+	 * was otherwise unable to be executed ("TMF_RESP_FUNC_FAILED").
+	 */
+	isci_task_build_tmf(&tmf, isci_tmf_ssp_lun_reset);
+
+	#define ISCI_LU_RESET_TIMEOUT_MS 2000 /* 2 second timeout. */
+	ret = isci_task_execute_tmf(isci_host, isci_device, &tmf, ISCI_LU_RESET_TIMEOUT_MS);
+
+	if (ret == TMF_RESP_FUNC_COMPLETE)
+		dev_dbg(&isci_host->pdev->dev,
+			"%s: %p: TMF_LU_RESET passed\n",
+			__func__, isci_device);
+	else
+		dev_dbg(&isci_host->pdev->dev,
+			"%s: %p: TMF_LU_RESET failed (%x)\n",
+			__func__, isci_device, ret);
+
+	return ret;
+}
+
+int isci_task_lu_reset(struct domain_device *dev, u8 *lun)
+{
+	struct isci_host *ihost = dev_to_ihost(dev);
+	struct isci_remote_device *idev;
+	unsigned long flags;
+	int ret = TMF_RESP_FUNC_COMPLETE;
+
+	spin_lock_irqsave(&ihost->scic_lock, flags);
+	idev = isci_get_device(dev->lldd_dev);
+	spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+	dev_dbg(&ihost->pdev->dev,
+		"%s: domain_device=%p, isci_host=%p; isci_device=%p\n",
+		__func__, dev, ihost, idev);
+
+	if (!idev) {
+		/* If the device is gone, escalate to I_T_Nexus_Reset. */
+		dev_dbg(&ihost->pdev->dev, "%s: No dev\n", __func__);
+
+		ret = TMF_RESP_FUNC_FAILED;
+		goto out;
+	}
+
+	/* Suspend the RNC, kill all TCs */
+	if (isci_remote_device_suspend_terminate(ihost, idev, NULL)
+	    != SCI_SUCCESS) {
+		/* The suspend/terminate only fails if isci_get_device fails */
+		ret = TMF_RESP_FUNC_FAILED;
+		goto out;
+	}
+	/* All pending I/Os have been terminated and cleaned up. */
+	if (!test_bit(IDEV_GONE, &idev->flags)) {
+		if (dev_is_sata(dev))
+			sas_ata_schedule_reset(dev);
+		else
+			/* Send the task management part of the reset. */
+			ret = isci_task_send_lu_reset_sas(ihost, idev, lun);
+	}
+ out:
+	isci_put_device(idev);
+	return ret;
+}
+
+
+/*	 int (*lldd_clear_nexus_port)(struct asd_sas_port *); */
+int isci_task_clear_nexus_port(struct asd_sas_port *port)
+{
+	return TMF_RESP_FUNC_FAILED;
+}
+
+
+
+int isci_task_clear_nexus_ha(struct sas_ha_struct *ha)
+{
+	return TMF_RESP_FUNC_FAILED;
+}
+
+/* Task Management Functions. Must be called from process context.	 */
+
+/**
+ * isci_task_abort_task() - This function is one of the SAS Domain Template
+ *    functions. This function is called by libsas to abort a specified task.
+ * @task: This parameter specifies the SAS task to abort.
+ *
+ * status, zero indicates success.
+ */
+int isci_task_abort_task(struct sas_task *task)
+{
+	struct isci_host *ihost = dev_to_ihost(task->dev);
+	DECLARE_COMPLETION_ONSTACK(aborted_io_completion);
+	struct isci_request       *old_request = NULL;
+	struct isci_remote_device *idev = NULL;
+	struct isci_tmf           tmf;
+	int                       ret = TMF_RESP_FUNC_FAILED;
+	unsigned long             flags;
+	int                       target_done_already = 0;
+
+	/* Get the isci_request reference from the task.  Note that
+	 * this check does not depend on the pending request list
+	 * in the device, because tasks driving resets may land here
+	 * after completion in the core.
+	 */
+	spin_lock_irqsave(&ihost->scic_lock, flags);
+	spin_lock(&task->task_state_lock);
+
+	old_request = task->lldd_task;
+
+	/* If task is already done, the request isn't valid */
+	if (!(task->task_state_flags & SAS_TASK_STATE_DONE) &&
+	    old_request) {
+		idev = isci_get_device(task->dev->lldd_dev);
+		target_done_already = test_bit(IREQ_COMPLETE_IN_TARGET,
+					       &old_request->flags);
+	}
+	spin_unlock(&task->task_state_lock);
+	spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+	dev_warn(&ihost->pdev->dev,
+		 "%s: dev = %p (%s%s), task = %p, old_request == %p\n",
+		 __func__, idev,
+		 (dev_is_sata(task->dev) ? "STP/SATA"
+					 : ((dev_is_expander(task->dev->dev_type))
+						? "SMP"
+						: "SSP")),
+		 ((idev) ? ((test_bit(IDEV_GONE, &idev->flags))
+			   ? " IDEV_GONE"
+			   : "")
+			 : " <NULL>"),
+		 task, old_request);
+
+	/* Device reset conditions signalled in task_state_flags are the
+	 * responsbility of libsas to observe at the start of the error
+	 * handler thread.
+	 */
+	if (!idev || !old_request) {
+		/* The request has already completed and there
+		* is nothing to do here other than to set the task
+		* done bit, and indicate that the task abort function
+		* was successful.
+		*/
+		spin_lock_irqsave(&task->task_state_lock, flags);
+		task->task_state_flags |= SAS_TASK_STATE_DONE;
+		task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+		spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+		ret = TMF_RESP_FUNC_COMPLETE;
+
+		dev_warn(&ihost->pdev->dev,
+			 "%s: abort task not needed for %p\n",
+			 __func__, task);
+		goto out;
+	}
+	/* Suspend the RNC, kill the TC */
+	if (isci_remote_device_suspend_terminate(ihost, idev, old_request)
+	    != SCI_SUCCESS) {
+		dev_warn(&ihost->pdev->dev,
+			 "%s: isci_remote_device_reset_terminate(dev=%p, "
+				 "req=%p, task=%p) failed\n",
+			 __func__, idev, old_request, task);
+		ret = TMF_RESP_FUNC_FAILED;
+		goto out;
+	}
+	spin_lock_irqsave(&ihost->scic_lock, flags);
+
+	if (task->task_proto == SAS_PROTOCOL_SMP ||
+	    sas_protocol_ata(task->task_proto) ||
+	    target_done_already ||
+	    test_bit(IDEV_GONE, &idev->flags)) {
+
+		spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+		/* No task to send, so explicitly resume the device here */
+		isci_remote_device_resume_from_abort(ihost, idev);
+
+		dev_warn(&ihost->pdev->dev,
+			 "%s: %s request"
+				 " or complete_in_target (%d), "
+				 "or IDEV_GONE (%d), thus no TMF\n",
+			 __func__,
+			 ((task->task_proto == SAS_PROTOCOL_SMP)
+			  ? "SMP"
+			  : (sas_protocol_ata(task->task_proto)
+				? "SATA/STP"
+				: "<other>")
+			  ),
+			 test_bit(IREQ_COMPLETE_IN_TARGET,
+				  &old_request->flags),
+			 test_bit(IDEV_GONE, &idev->flags));
+
+		spin_lock_irqsave(&task->task_state_lock, flags);
+		task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+		task->task_state_flags |= SAS_TASK_STATE_DONE;
+		spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+		ret = TMF_RESP_FUNC_COMPLETE;
+	} else {
+		/* Fill in the tmf structure */
+		isci_task_build_abort_task_tmf(&tmf, isci_tmf_ssp_task_abort,
+					       old_request);
+
+		spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+		/* Send the task management request. */
+		#define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* 1/2 second timeout */
+		ret = isci_task_execute_tmf(ihost, idev, &tmf,
+					    ISCI_ABORT_TASK_TIMEOUT_MS);
+	}
+out:
+	dev_warn(&ihost->pdev->dev,
+		 "%s: Done; dev = %p, task = %p , old_request == %p\n",
+		 __func__, idev, task, old_request);
+	isci_put_device(idev);
+	return ret;
+}
+
+/**
+ * isci_task_abort_task_set() - This function is one of the SAS Domain Template
+ *    functions. This is one of the Task Management functoins called by libsas,
+ *    to abort all task for the given lun.
+ * @d_device: This parameter specifies the domain device associated with this
+ *    request.
+ * @lun: This parameter specifies the lun associated with this request.
+ *
+ * status, zero indicates success.
+ */
+int isci_task_abort_task_set(
+	struct domain_device *d_device,
+	u8 *lun)
+{
+	return TMF_RESP_FUNC_FAILED;
+}
+
+
+/**
+ * isci_task_clear_task_set() - This function is one of the SAS Domain Template
+ *    functions. This is one of the Task Management functoins called by libsas.
+ * @d_device: This parameter specifies the domain device associated with this
+ *    request.
+ * @lun: This parameter specifies the lun	 associated with this request.
+ *
+ * status, zero indicates success.
+ */
+int isci_task_clear_task_set(
+	struct domain_device *d_device,
+	u8 *lun)
+{
+	return TMF_RESP_FUNC_FAILED;
+}
+
+
+/**
+ * isci_task_query_task() - This function is implemented to cause libsas to
+ *    correctly escalate the failed abort to a LUN or target reset (this is
+ *    because sas_scsi_find_task libsas function does not correctly interpret
+ *    all return codes from the abort task call).  When TMF_RESP_FUNC_SUCC is
+ *    returned, libsas turns this into a LUN reset; when FUNC_FAILED is
+ *    returned, libsas will turn this into a target reset
+ * @task: This parameter specifies the sas task being queried.
+ *
+ * status, zero indicates success.
+ */
+int isci_task_query_task(
+	struct sas_task *task)
+{
+	/* See if there is a pending device reset for this device. */
+	if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET)
+		return TMF_RESP_FUNC_FAILED;
+	else
+		return TMF_RESP_FUNC_SUCC;
+}
+
+/*
+ * isci_task_request_complete() - This function is called by the sci core when
+ *    an task request completes.
+ * @ihost: This parameter specifies the ISCI host object
+ * @ireq: This parameter is the completed isci_request object.
+ * @completion_status: This parameter specifies the completion status from the
+ *    sci core.
+ *
+ * none.
+ */
+void
+isci_task_request_complete(struct isci_host *ihost,
+			   struct isci_request *ireq,
+			   enum sci_task_status completion_status)
+{
+	struct isci_tmf *tmf = isci_request_access_tmf(ireq);
+	struct completion *tmf_complete = NULL;
+
+	dev_dbg(&ihost->pdev->dev,
+		"%s: request = %p, status=%d\n",
+		__func__, ireq, completion_status);
+
+	set_bit(IREQ_COMPLETE_IN_TARGET, &ireq->flags);
+
+	if (tmf) {
+		tmf->status = completion_status;
+
+		if (tmf->proto == SAS_PROTOCOL_SSP) {
+			memcpy(tmf->resp.rsp_buf,
+			       ireq->ssp.rsp_buf,
+			       SSP_RESP_IU_MAX_SIZE);
+		} else if (tmf->proto == SAS_PROTOCOL_SATA) {
+			memcpy(&tmf->resp.d2h_fis,
+			       &ireq->stp.rsp,
+			       sizeof(struct dev_to_host_fis));
+		}
+		/* PRINT_TMF( ((struct isci_tmf *)request->task)); */
+		tmf_complete = tmf->complete;
+	}
+	sci_controller_complete_io(ihost, ireq->target_device, ireq);
+	/* set the 'terminated' flag handle to make sure it cannot be terminated
+	 *  or completed again.
+	 */
+	set_bit(IREQ_TERMINATED, &ireq->flags);
+
+	if (test_and_clear_bit(IREQ_ABORT_PATH_ACTIVE, &ireq->flags))
+		wake_up_all(&ihost->eventq);
+
+	if (!test_bit(IREQ_NO_AUTO_FREE_TAG, &ireq->flags))
+		isci_free_tag(ihost, ireq->io_tag);
+
+	/* The task management part completes last. */
+	if (tmf_complete)
+		complete(tmf_complete);
+}
+
+static int isci_reset_device(struct isci_host *ihost,
+			     struct domain_device *dev,
+			     struct isci_remote_device *idev)
+{
+	int rc = TMF_RESP_FUNC_COMPLETE, reset_stat = -1;
+	struct sas_phy *phy = sas_get_local_phy(dev);
+	struct isci_port *iport = dev->port->lldd_port;
+
+	dev_dbg(&ihost->pdev->dev, "%s: idev %p\n", __func__, idev);
+
+	/* Suspend the RNC, terminate all outstanding TCs. */
+	if (isci_remote_device_suspend_terminate(ihost, idev, NULL)
+	    != SCI_SUCCESS) {
+		rc = TMF_RESP_FUNC_FAILED;
+		goto out;
+	}
+	/* Note that since the termination for outstanding requests succeeded,
+	 * this function will return success.  This is because the resets will
+	 * only fail if the device has been removed (ie. hotplug), and the
+	 * primary duty of this function is to cleanup tasks, so that is the
+	 * relevant status.
+	 */
+	if (!test_bit(IDEV_GONE, &idev->flags)) {
+		if (scsi_is_sas_phy_local(phy)) {
+			struct isci_phy *iphy = &ihost->phys[phy->number];
+
+			reset_stat = isci_port_perform_hard_reset(ihost, iport,
+								  iphy);
+		} else
+			reset_stat = sas_phy_reset(phy, !dev_is_sata(dev));
+	}
+	/* Explicitly resume the RNC here, since there was no task sent. */
+	isci_remote_device_resume_from_abort(ihost, idev);
+
+	dev_dbg(&ihost->pdev->dev, "%s: idev %p complete, reset_stat=%d.\n",
+		__func__, idev, reset_stat);
+ out:
+	sas_put_local_phy(phy);
+	return rc;
+}
+
+int isci_task_I_T_nexus_reset(struct domain_device *dev)
+{
+	struct isci_host *ihost = dev_to_ihost(dev);
+	struct isci_remote_device *idev;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&ihost->scic_lock, flags);
+	idev = isci_get_device(dev->lldd_dev);
+	spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+	if (!idev) {
+		/* XXX: need to cleanup any ireqs targeting this
+		 * domain_device
+		 */
+		ret = -ENODEV;
+		goto out;
+	}
+
+	ret = isci_reset_device(ihost, dev, idev);
+ out:
+	isci_put_device(idev);
+	return ret;
+}