Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

25 files changed, 44831 insertions, 0 deletions

diff --git a/drivers/scsi/mpt3sas/Kconfig b/drivers/scsi/mpt3sas/Kconfig
new file mode 100644
index 0000000000..c299f7e078
--- /dev/null
+++ b/drivers/scsi/mpt3sas/Kconfig
@@ -0,0 +1,83 @@
+#
+# Kernel configuration file for the MPT3SAS
+#
+# This code is based on drivers/scsi/mpt3sas/Kconfig
+# Copyright (C) 2012-2014  LSI Corporation
+#  (mailto:DL-MPTFusionLinux@lsi.com)
+
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# NO WARRANTY
+# THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+# CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+# LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+# solely responsible for determining the appropriateness of using and
+# distributing the Program and assumes all risks associated with its
+# exercise of rights under this Agreement, including but not limited to
+# the risks and costs of program errors, damage to or loss of data,
+# programs or equipment, and unavailability or interruption of operations.
+
+# DISCLAIMER OF LIABILITY
+# NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+# TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+# USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+# HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+# USA.
+
+config SCSI_MPT3SAS
+	tristate "LSI MPT Fusion SAS 3.0 & SAS 2.0 Device Driver"
+	depends on PCI && SCSI
+	select SCSI_SAS_ATTRS
+	select RAID_ATTRS
+	select IRQ_POLL
+	help
+	This driver supports PCI-Express SAS 12Gb/s Host Adapters.
+
+config SCSI_MPT2SAS_MAX_SGE
+	int "LSI MPT Fusion SAS 2.0 Max number of SG Entries (16 - 256)"
+	depends on PCI && SCSI && SCSI_MPT3SAS
+	default "128"
+	range 16 256
+	help
+	This option allows you to specify the maximum number of scatter-
+	gather entries per I/O. The driver default is 128, which matches
+	MAX_PHYS_SEGMENTS in most kernels.  However in SuSE kernels this
+	can be 256. However, it may decreased down to 16.  Decreasing this
+	parameter will reduce memory requirements on a per controller instance.
+
+config SCSI_MPT3SAS_MAX_SGE
+	int "LSI MPT Fusion SAS 3.0 Max number of SG Entries (16 - 256)"
+	depends on PCI && SCSI && SCSI_MPT3SAS
+	default "128"
+	range 16 256
+	help
+	This option allows you to specify the maximum number of scatter-
+	gather entries per I/O. The driver default is 128, which matches
+	MAX_PHYS_SEGMENTS in most kernels.  However in SuSE kernels this
+	can be 256. However, it may decreased down to 16.  Decreasing this
+	parameter will reduce memory requirements on a per controller instance.
+
+config SCSI_MPT2SAS
+	tristate "Legacy MPT2SAS config option"
+	default n
+	select SCSI_MPT3SAS
+	depends on PCI && SCSI
+	help
+	Dummy config option for backwards compatibility: configure the MPT3SAS
+	driver instead.
diff --git a/drivers/scsi/mpt3sas/Makefile b/drivers/scsi/mpt3sas/Makefile
new file mode 100644
index 0000000000..e76d994dbe
--- /dev/null
+++ b/drivers/scsi/mpt3sas/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+# mpt3sas makefile
+obj-$(CONFIG_SCSI_MPT3SAS) += mpt3sas.o
+mpt3sas-y +=  mpt3sas_base.o     \
+		mpt3sas_config.o \
+		mpt3sas_scsih.o      \
+		mpt3sas_transport.o     \
+		mpt3sas_ctl.o	\
+		mpt3sas_trigger_diag.o \
+		mpt3sas_warpdrive.o \
+		mpt3sas_debugfs.o \
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h
new file mode 100644
index 0000000000..6de35b3222
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2.h
@@ -0,0 +1,1300 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2000-2020 Broadcom Inc. All rights reserved.
+ *
+ *
+ *          Name:  mpi2.h
+ *         Title:  MPI Message independent structures and definitions
+ *                 including System Interface Register Set and
+ *                 scatter/gather formats.
+ * Creation Date:  June 21, 2006
+ *
+ *  mpi2.h Version:  02.00.54
+ *
+ * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
+ *       prefix are for use only on MPI v2.5 products, and must not be used
+ *       with MPI v2.0 products. Unless otherwise noted, names beginning with
+ *       MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
+ *
+ * Version History
+ * ---------------
+ *
+ * Date      Version   Description
+ * --------  --------  ------------------------------------------------------
+ * 04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 06-04-07  02.00.01  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 06-26-07  02.00.02  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 08-31-07  02.00.03  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Moved ReplyPostHostIndex register to offset 0x6C of the
+ *                     MPI2_SYSTEM_INTERFACE_REGS and modified the define for
+ *                     MPI2_REPLY_POST_HOST_INDEX_OFFSET.
+ *                     Added union of request descriptors.
+ *                     Added union of reply descriptors.
+ * 10-31-07  02.00.04  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Added define for MPI2_VERSION_02_00.
+ *                     Fixed the size of the FunctionDependent5 field in the
+ *                     MPI2_DEFAULT_REPLY structure.
+ * 12-18-07  02.00.05  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Removed the MPI-defined Fault Codes and extended the
+ *                     product specific codes up to 0xEFFF.
+ *                     Added a sixth key value for the WriteSequence register
+ *                     and changed the flush value to 0x0.
+ *                     Added message function codes for Diagnostic Buffer Post
+ *                     and Diagnsotic Release.
+ *                     New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED
+ *                     Moved MPI2_VERSION_UNION from mpi2_ioc.h.
+ * 02-29-08  02.00.06  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 03-03-08  02.00.07  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 05-21-08  02.00.08  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Added #defines for marking a reply descriptor as unused.
+ * 06-27-08  02.00.09  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 10-02-08  02.00.10  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Moved LUN field defines from mpi2_init.h.
+ * 01-19-09  02.00.11  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 05-06-09  02.00.12  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     In all request and reply descriptors, replaced VF_ID
+ *                     field with MSIxIndex field.
+ *                     Removed DevHandle field from
+ *                     MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those
+ *                     bytes reserved.
+ *                     Added RAID Accelerator functionality.
+ * 07-30-09  02.00.13  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 10-28-09  02.00.14  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Added MSI-x index mask and shift for Reply Post Host
+ *                     Index register.
+ *                     Added function code for Host Based Discovery Action.
+ * 02-10-10  02.00.15  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Added define for MPI2_FUNCTION_PWR_MGMT_CONTROL.
+ *                     Added defines for product-specific range of message
+ *                     function codes, 0xF0 to 0xFF.
+ * 05-12-10  02.00.16  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Added alternative defines for the SGE Direction bit.
+ * 08-11-10  02.00.17  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 11-10-10  02.00.18  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define.
+ * 02-23-11  02.00.19  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Added MPI2_FUNCTION_SEND_HOST_MESSAGE.
+ * 03-09-11  02.00.20  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 05-25-11  02.00.21  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 08-24-11  02.00.22  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 11-18-11  02.00.23  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Incorporating additions for MPI v2.5.
+ * 02-06-12  02.00.24  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 03-29-12  02.00.25  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Added Hard Reset delay timings.
+ * 07-10-12  02.00.26  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 07-26-12  02.00.27  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 11-27-12  02.00.28  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 12-20-12  02.00.29  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Added MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET.
+ * 04-09-13  02.00.30  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 04-17-13  02.00.31  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 08-19-13  02.00.32  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 12-05-13  02.00.33  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 01-08-14  02.00.34  Bumped MPI2_HEADER_VERSION_UNIT
+ * 06-13-14  02.00.35  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 11-18-14  02.00.36  Updated copyright information.
+ *                     Bumped MPI2_HEADER_VERSION_UNIT.
+ * 03-16-15  02.00.37  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Added Scratchpad registers to
+ *                     MPI2_SYSTEM_INTERFACE_REGS.
+ *                     Added MPI2_DIAG_SBR_RELOAD.
+ * 03-19-15  02.00.38  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 05-25-15  02.00.39  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 08-25-15  02.00.40  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 12-15-15  02.00.41  Bumped MPI_HEADER_VERSION_UNIT
+ * 01-01-16  02.00.42  Bumped MPI_HEADER_VERSION_UNIT
+ * 04-05-16  02.00.43  Modified  MPI26_DIAG_BOOT_DEVICE_SELECT defines
+ *                     to be unique within first 32 characters.
+ *                     Removed AHCI support.
+ *                     Removed SOP support.
+ *                     Bumped MPI2_HEADER_VERSION_UNIT.
+ * 04-10-16  02.00.44  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 07-06-16  02.00.45  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 09-02-16  02.00.46  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 11-23-16  02.00.47  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 02-03-17  02.00.48  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 06-13-17  02.00.49  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 09-29-17  02.00.50  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 07-22-18  02.00.51  Added SECURE_BOOT define.
+ *                     Bumped MPI2_HEADER_VERSION_UNIT
+ * 08-15-18  02.00.52  Bumped MPI2_HEADER_VERSION_UNIT.
+ * 08-28-18  02.00.53  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                     Added MPI2_IOCSTATUS_FAILURE
+ * 12-17-18  02.00.54  Bumped MPI2_HEADER_VERSION_UNIT
+ * 06-24-19  02.00.55  Bumped MPI2_HEADER_VERSION_UNIT
+ * 08-01-19  02.00.56  Bumped MPI2_HEADER_VERSION_UNIT
+ * 10-02-19  02.00.57  Bumped MPI2_HEADER_VERSION_UNIT
+ *  --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_H
+#define MPI2_H
+
+/*****************************************************************************
+*
+*       MPI Version Definitions
+*
+*****************************************************************************/
+
+#define MPI2_VERSION_MAJOR_MASK             (0xFF00)
+#define MPI2_VERSION_MAJOR_SHIFT            (8)
+#define MPI2_VERSION_MINOR_MASK             (0x00FF)
+#define MPI2_VERSION_MINOR_SHIFT            (0)
+
+/*major version for all MPI v2.x */
+#define MPI2_VERSION_MAJOR                  (0x02)
+
+/*minor version for MPI v2.0 compatible products */
+#define MPI2_VERSION_MINOR                  (0x00)
+#define MPI2_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \
+					MPI2_VERSION_MINOR)
+#define MPI2_VERSION_02_00                  (0x0200)
+
+/*minor version for MPI v2.5 compatible products */
+#define MPI25_VERSION_MINOR                 (0x05)
+#define MPI25_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \
+					MPI25_VERSION_MINOR)
+#define MPI2_VERSION_02_05                  (0x0205)
+
+/*minor version for MPI v2.6 compatible products */
+#define MPI26_VERSION_MINOR		    (0x06)
+#define MPI26_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \
+					MPI26_VERSION_MINOR)
+#define MPI2_VERSION_02_06		    (0x0206)
+
+
+/* Unit and Dev versioning for this MPI header set */
+#define MPI2_HEADER_VERSION_UNIT            (0x39)
+#define MPI2_HEADER_VERSION_DEV             (0x00)
+#define MPI2_HEADER_VERSION_UNIT_MASK       (0xFF00)
+#define MPI2_HEADER_VERSION_UNIT_SHIFT      (8)
+#define MPI2_HEADER_VERSION_DEV_MASK        (0x00FF)
+#define MPI2_HEADER_VERSION_DEV_SHIFT       (0)
+#define MPI2_HEADER_VERSION ((MPI2_HEADER_VERSION_UNIT << 8) | \
+					MPI2_HEADER_VERSION_DEV)
+
+/*****************************************************************************
+*
+*       IOC State Definitions
+*
+*****************************************************************************/
+
+#define MPI2_IOC_STATE_RESET               (0x00000000)
+#define MPI2_IOC_STATE_READY               (0x10000000)
+#define MPI2_IOC_STATE_OPERATIONAL         (0x20000000)
+#define MPI2_IOC_STATE_FAULT               (0x40000000)
+#define MPI2_IOC_STATE_COREDUMP            (0x50000000)
+
+#define MPI2_IOC_STATE_MASK                (0xF0000000)
+#define MPI2_IOC_STATE_SHIFT               (28)
+
+/*Fault state range for prodcut specific codes */
+#define MPI2_FAULT_PRODUCT_SPECIFIC_MIN                 (0x0000)
+#define MPI2_FAULT_PRODUCT_SPECIFIC_MAX                 (0xEFFF)
+
+/*****************************************************************************
+*
+*       System Interface Register Definitions
+*
+*****************************************************************************/
+
+typedef struct _MPI2_SYSTEM_INTERFACE_REGS {
+	U32 Doorbell;		/*0x00 */
+	U32 WriteSequence;	/*0x04 */
+	U32 HostDiagnostic;	/*0x08 */
+	U32 Reserved1;		/*0x0C */
+	U32 DiagRWData;		/*0x10 */
+	U32 DiagRWAddressLow;	/*0x14 */
+	U32 DiagRWAddressHigh;	/*0x18 */
+	U32 Reserved2[5];	/*0x1C */
+	U32 HostInterruptStatus;	/*0x30 */
+	U32 HostInterruptMask;	/*0x34 */
+	U32 DCRData;		/*0x38 */
+	U32 DCRAddress;		/*0x3C */
+	U32 Reserved3[2];	/*0x40 */
+	U32 ReplyFreeHostIndex;	/*0x48 */
+	U32 Reserved4[8];	/*0x4C */
+	U32 ReplyPostHostIndex;	/*0x6C */
+	U32 Reserved5;		/*0x70 */
+	U32 HCBSize;		/*0x74 */
+	U32 HCBAddressLow;	/*0x78 */
+	U32 HCBAddressHigh;	/*0x7C */
+	U32 Reserved6[12];	/*0x80 */
+	U32 Scratchpad[4];	/*0xB0 */
+	U32 RequestDescriptorPostLow;	/*0xC0 */
+	U32 RequestDescriptorPostHigh;	/*0xC4 */
+	U32 AtomicRequestDescriptorPost;/*0xC8 */
+	U32 Reserved7[13];	/*0xCC */
+} MPI2_SYSTEM_INTERFACE_REGS,
+	*PTR_MPI2_SYSTEM_INTERFACE_REGS,
+	Mpi2SystemInterfaceRegs_t,
+	*pMpi2SystemInterfaceRegs_t;
+
+/*
+ *Defines for working with the Doorbell register.
+ */
+#define MPI2_DOORBELL_OFFSET                    (0x00000000)
+
+/*IOC --> System values */
+#define MPI2_DOORBELL_USED                      (0x08000000)
+#define MPI2_DOORBELL_WHO_INIT_MASK             (0x07000000)
+#define MPI2_DOORBELL_WHO_INIT_SHIFT            (24)
+#define MPI2_DOORBELL_FAULT_CODE_MASK           (0x0000FFFF)
+#define MPI2_DOORBELL_DATA_MASK                 (0x0000FFFF)
+
+/*System --> IOC values */
+#define MPI2_DOORBELL_FUNCTION_MASK             (0xFF000000)
+#define MPI2_DOORBELL_FUNCTION_SHIFT            (24)
+#define MPI2_DOORBELL_ADD_DWORDS_MASK           (0x00FF0000)
+#define MPI2_DOORBELL_ADD_DWORDS_SHIFT          (16)
+
+/*
+ *Defines for the WriteSequence register
+ */
+#define MPI2_WRITE_SEQUENCE_OFFSET              (0x00000004)
+#define MPI2_WRSEQ_KEY_VALUE_MASK               (0x0000000F)
+#define MPI2_WRSEQ_FLUSH_KEY_VALUE              (0x0)
+#define MPI2_WRSEQ_1ST_KEY_VALUE                (0xF)
+#define MPI2_WRSEQ_2ND_KEY_VALUE                (0x4)
+#define MPI2_WRSEQ_3RD_KEY_VALUE                (0xB)
+#define MPI2_WRSEQ_4TH_KEY_VALUE                (0x2)
+#define MPI2_WRSEQ_5TH_KEY_VALUE                (0x7)
+#define MPI2_WRSEQ_6TH_KEY_VALUE                (0xD)
+
+/*
+ *Defines for the HostDiagnostic register
+ */
+#define MPI2_HOST_DIAGNOSTIC_OFFSET             (0x00000008)
+
+#define MPI26_DIAG_SECURE_BOOT                  (0x80000000)
+
+#define MPI2_DIAG_SBR_RELOAD                    (0x00002000)
+
+#define MPI2_DIAG_BOOT_DEVICE_SELECT_MASK       (0x00001800)
+#define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT    (0x00000000)
+#define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW       (0x00000800)
+
+/* Defines for V7A/V7R HostDiagnostic Register */
+#define MPI26_DIAG_BOOT_DEVICE_SEL_64FLASH      (0x00000000)
+#define MPI26_DIAG_BOOT_DEVICE_SEL_64HCDW       (0x00000800)
+#define MPI26_DIAG_BOOT_DEVICE_SEL_32FLASH      (0x00001000)
+#define MPI26_DIAG_BOOT_DEVICE_SEL_32HCDW       (0x00001800)
+
+#define MPI2_DIAG_CLEAR_FLASH_BAD_SIG           (0x00000400)
+#define MPI2_DIAG_FORCE_HCB_ON_RESET            (0x00000200)
+#define MPI2_DIAG_HCB_MODE                      (0x00000100)
+#define MPI2_DIAG_DIAG_WRITE_ENABLE             (0x00000080)
+#define MPI2_DIAG_FLASH_BAD_SIG                 (0x00000040)
+#define MPI2_DIAG_RESET_HISTORY                 (0x00000020)
+#define MPI2_DIAG_DIAG_RW_ENABLE                (0x00000010)
+#define MPI2_DIAG_RESET_ADAPTER                 (0x00000004)
+#define MPI2_DIAG_HOLD_IOC_RESET                (0x00000002)
+
+/*
+ *Offsets for DiagRWData and address
+ */
+#define MPI2_DIAG_RW_DATA_OFFSET                (0x00000010)
+#define MPI2_DIAG_RW_ADDRESS_LOW_OFFSET         (0x00000014)
+#define MPI2_DIAG_RW_ADDRESS_HIGH_OFFSET        (0x00000018)
+
+/*
+ *Defines for the HostInterruptStatus register
+ */
+#define MPI2_HOST_INTERRUPT_STATUS_OFFSET       (0x00000030)
+#define MPI2_HIS_SYS2IOC_DB_STATUS              (0x80000000)
+#define MPI2_HIS_IOP_DOORBELL_STATUS MPI2_HIS_SYS2IOC_DB_STATUS
+#define MPI2_HIS_RESET_IRQ_STATUS               (0x40000000)
+#define MPI2_HIS_REPLY_DESCRIPTOR_INTERRUPT     (0x00000008)
+#define MPI2_HIS_IOC2SYS_DB_STATUS              (0x00000001)
+#define MPI2_HIS_DOORBELL_INTERRUPT MPI2_HIS_IOC2SYS_DB_STATUS
+
+/*
+ *Defines for the HostInterruptMask register
+ */
+#define MPI2_HOST_INTERRUPT_MASK_OFFSET         (0x00000034)
+#define MPI2_HIM_RESET_IRQ_MASK                 (0x40000000)
+#define MPI2_HIM_REPLY_INT_MASK                 (0x00000008)
+#define MPI2_HIM_RIM                            MPI2_HIM_REPLY_INT_MASK
+#define MPI2_HIM_IOC2SYS_DB_MASK                (0x00000001)
+#define MPI2_HIM_DIM                            MPI2_HIM_IOC2SYS_DB_MASK
+
+/*
+ *Offsets for DCRData and address
+ */
+#define MPI2_DCR_DATA_OFFSET                    (0x00000038)
+#define MPI2_DCR_ADDRESS_OFFSET                 (0x0000003C)
+
+/*
+ *Offset for the Reply Free Queue
+ */
+#define MPI2_REPLY_FREE_HOST_INDEX_OFFSET       (0x00000048)
+
+/*
+ *Defines for the Reply Descriptor Post Queue
+ */
+#define MPI2_REPLY_POST_HOST_INDEX_OFFSET       (0x0000006C)
+#define MPI2_REPLY_POST_HOST_INDEX_MASK         (0x00FFFFFF)
+#define MPI2_RPHI_MSIX_INDEX_MASK               (0xFF000000)
+#define MPI2_RPHI_MSIX_INDEX_SHIFT              (24)
+#define MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET  (0x0000030C) /*MPI v2.5 only*/
+
+
+/*
+ *Defines for the HCBSize and address
+ */
+#define MPI2_HCB_SIZE_OFFSET                    (0x00000074)
+#define MPI2_HCB_SIZE_SIZE_MASK                 (0xFFFFF000)
+#define MPI2_HCB_SIZE_HCB_ENABLE                (0x00000001)
+
+#define MPI2_HCB_ADDRESS_LOW_OFFSET             (0x00000078)
+#define MPI2_HCB_ADDRESS_HIGH_OFFSET            (0x0000007C)
+
+/*
+ *Offsets for the Scratchpad registers
+ */
+#define MPI26_SCRATCHPAD0_OFFSET                (0x000000B0)
+#define MPI26_SCRATCHPAD1_OFFSET                (0x000000B4)
+#define MPI26_SCRATCHPAD2_OFFSET                (0x000000B8)
+#define MPI26_SCRATCHPAD3_OFFSET                (0x000000BC)
+
+/*
+ *Offsets for the Request Descriptor Post Queue
+ */
+#define MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET     (0x000000C0)
+#define MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET    (0x000000C4)
+#define MPI26_ATOMIC_REQUEST_DESCRIPTOR_POST_OFFSET (0x000000C8)
+
+/*Hard Reset delay timings */
+#define MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC     (50000)
+#define MPI2_HARD_RESET_PCIE_RESET_READ_WINDOW_MICRO_SEC    (255000)
+#define MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC    (256000)
+
+/*****************************************************************************
+*
+*       Message Descriptors
+*
+*****************************************************************************/
+
+/*Request Descriptors */
+
+/*Default Request Descriptor */
+typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR {
+	U8 RequestFlags;	/*0x00 */
+	U8 MSIxIndex;		/*0x01 */
+	U16 SMID;		/*0x02 */
+	U16 LMID;		/*0x04 */
+	U16 DescriptorTypeDependent;	/*0x06 */
+} MPI2_DEFAULT_REQUEST_DESCRIPTOR,
+	*PTR_MPI2_DEFAULT_REQUEST_DESCRIPTOR,
+	Mpi2DefaultRequestDescriptor_t,
+	*pMpi2DefaultRequestDescriptor_t;
+
+/*defines for the RequestFlags field */
+#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK               (0x1E)
+#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_RSHIFT             (1)
+#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO                 (0x00)
+#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET             (0x02)
+#define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY           (0x06)
+#define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE            (0x08)
+#define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR        (0x0A)
+#define MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO      (0x0C)
+#define MPI26_REQ_DESCRIPT_FLAGS_PCIE_ENCAPSULATED      (0x10)
+
+#define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER         (0x01)
+
+/*High Priority Request Descriptor */
+typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR {
+	U8 RequestFlags;	/*0x00 */
+	U8 MSIxIndex;		/*0x01 */
+	U16 SMID;		/*0x02 */
+	U16 LMID;		/*0x04 */
+	U16 Reserved1;		/*0x06 */
+} MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR,
+	*PTR_MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR,
+	Mpi2HighPriorityRequestDescriptor_t,
+	*pMpi2HighPriorityRequestDescriptor_t;
+
+/*SCSI IO Request Descriptor */
+typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR {
+	U8 RequestFlags;	/*0x00 */
+	U8 MSIxIndex;		/*0x01 */
+	U16 SMID;		/*0x02 */
+	U16 LMID;		/*0x04 */
+	U16 DevHandle;		/*0x06 */
+} MPI2_SCSI_IO_REQUEST_DESCRIPTOR,
+	*PTR_MPI2_SCSI_IO_REQUEST_DESCRIPTOR,
+	Mpi2SCSIIORequestDescriptor_t,
+	*pMpi2SCSIIORequestDescriptor_t;
+
+/*SCSI Target Request Descriptor */
+typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR {
+	U8 RequestFlags;	/*0x00 */
+	U8 MSIxIndex;		/*0x01 */
+	U16 SMID;		/*0x02 */
+	U16 LMID;		/*0x04 */
+	U16 IoIndex;		/*0x06 */
+} MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR,
+	*PTR_MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR,
+	Mpi2SCSITargetRequestDescriptor_t,
+	*pMpi2SCSITargetRequestDescriptor_t;
+
+/*RAID Accelerator Request Descriptor */
+typedef struct _MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR {
+	U8 RequestFlags;	/*0x00 */
+	U8 MSIxIndex;		/*0x01 */
+	U16 SMID;		/*0x02 */
+	U16 LMID;		/*0x04 */
+	U16 Reserved;		/*0x06 */
+} MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
+	*PTR_MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
+	Mpi2RAIDAcceleratorRequestDescriptor_t,
+	*pMpi2RAIDAcceleratorRequestDescriptor_t;
+
+/*Fast Path SCSI IO Request Descriptor */
+typedef MPI2_SCSI_IO_REQUEST_DESCRIPTOR
+	MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR,
+	*PTR_MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR,
+	Mpi25FastPathSCSIIORequestDescriptor_t,
+	*pMpi25FastPathSCSIIORequestDescriptor_t;
+
+/*PCIe Encapsulated Request Descriptor */
+typedef MPI2_SCSI_IO_REQUEST_DESCRIPTOR
+	MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR,
+	*PTR_MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR,
+	Mpi26PCIeEncapsulatedRequestDescriptor_t,
+	*pMpi26PCIeEncapsulatedRequestDescriptor_t;
+
+/*union of Request Descriptors */
+typedef union _MPI2_REQUEST_DESCRIPTOR_UNION {
+	MPI2_DEFAULT_REQUEST_DESCRIPTOR Default;
+	MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR HighPriority;
+	MPI2_SCSI_IO_REQUEST_DESCRIPTOR SCSIIO;
+	MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget;
+	MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR RAIDAccelerator;
+	MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR FastPathSCSIIO;
+	MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR PCIeEncapsulated;
+	U64 Words;
+} MPI2_REQUEST_DESCRIPTOR_UNION,
+	*PTR_MPI2_REQUEST_DESCRIPTOR_UNION,
+	Mpi2RequestDescriptorUnion_t,
+	*pMpi2RequestDescriptorUnion_t;
+
+/*Atomic Request Descriptors */
+
+/*
+ * All Atomic Request Descriptors have the same format, so the following
+ * structure is used for all Atomic Request Descriptors:
+ *      Atomic Default Request Descriptor
+ *      Atomic High Priority Request Descriptor
+ *      Atomic SCSI IO Request Descriptor
+ *      Atomic SCSI Target Request Descriptor
+ *      Atomic RAID Accelerator Request Descriptor
+ *      Atomic Fast Path SCSI IO Request Descriptor
+ *      Atomic PCIe Encapsulated Request Descriptor
+ */
+
+/*Atomic Request Descriptor */
+typedef struct _MPI26_ATOMIC_REQUEST_DESCRIPTOR {
+	U8 RequestFlags;	/* 0x00 */
+	U8 MSIxIndex;		/* 0x01 */
+	U16 SMID;		/* 0x02 */
+} MPI26_ATOMIC_REQUEST_DESCRIPTOR,
+	*PTR_MPI26_ATOMIC_REQUEST_DESCRIPTOR,
+	Mpi26AtomicRequestDescriptor_t,
+	*pMpi26AtomicRequestDescriptor_t;
+
+/*for the RequestFlags field, use the same
+ *defines as MPI2_DEFAULT_REQUEST_DESCRIPTOR
+ */
+
+/*Reply Descriptors */
+
+/*Default Reply Descriptor */
+typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR {
+	U8 ReplyFlags;		/*0x00 */
+	U8 MSIxIndex;		/*0x01 */
+	U16 DescriptorTypeDependent1;	/*0x02 */
+	U32 DescriptorTypeDependent2;	/*0x04 */
+} MPI2_DEFAULT_REPLY_DESCRIPTOR,
+	*PTR_MPI2_DEFAULT_REPLY_DESCRIPTOR,
+	Mpi2DefaultReplyDescriptor_t,
+	*pMpi2DefaultReplyDescriptor_t;
+
+/*defines for the ReplyFlags field */
+#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK                   (0x0F)
+#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS             (0x00)
+#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY               (0x01)
+#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS        (0x02)
+#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER       (0x03)
+#define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS    (0x05)
+#define MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS  (0x06)
+#define MPI26_RPY_DESCRIPT_FLAGS_PCIE_ENCAPSULATED_SUCCESS  (0x08)
+#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED                      (0x0F)
+
+/*values for marking a reply descriptor as unused */
+#define MPI2_RPY_DESCRIPT_UNUSED_WORD0_MARK             (0xFFFFFFFF)
+#define MPI2_RPY_DESCRIPT_UNUSED_WORD1_MARK             (0xFFFFFFFF)
+
+/*Address Reply Descriptor */
+typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR {
+	U8 ReplyFlags;		/*0x00 */
+	U8 MSIxIndex;		/*0x01 */
+	U16 SMID;		/*0x02 */
+	U32 ReplyFrameAddress;	/*0x04 */
+} MPI2_ADDRESS_REPLY_DESCRIPTOR,
+	*PTR_MPI2_ADDRESS_REPLY_DESCRIPTOR,
+	Mpi2AddressReplyDescriptor_t,
+	*pMpi2AddressReplyDescriptor_t;
+
+#define MPI2_ADDRESS_REPLY_SMID_INVALID                 (0x00)
+
+/*SCSI IO Success Reply Descriptor */
+typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR {
+	U8 ReplyFlags;		/*0x00 */
+	U8 MSIxIndex;		/*0x01 */
+	U16 SMID;		/*0x02 */
+	U16 TaskTag;		/*0x04 */
+	U16 Reserved1;		/*0x06 */
+} MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
+	*PTR_MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
+	Mpi2SCSIIOSuccessReplyDescriptor_t,
+	*pMpi2SCSIIOSuccessReplyDescriptor_t;
+
+/*TargetAssist Success Reply Descriptor */
+typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR {
+	U8 ReplyFlags;		/*0x00 */
+	U8 MSIxIndex;		/*0x01 */
+	U16 SMID;		/*0x02 */
+	U8 SequenceNumber;	/*0x04 */
+	U8 Reserved1;		/*0x05 */
+	U16 IoIndex;		/*0x06 */
+} MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR,
+	*PTR_MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR,
+	Mpi2TargetAssistSuccessReplyDescriptor_t,
+	*pMpi2TargetAssistSuccessReplyDescriptor_t;
+
+/*Target Command Buffer Reply Descriptor */
+typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR {
+	U8 ReplyFlags;		/*0x00 */
+	U8 MSIxIndex;		/*0x01 */
+	U8 VP_ID;		/*0x02 */
+	U8 Flags;		/*0x03 */
+	U16 InitiatorDevHandle;	/*0x04 */
+	U16 IoIndex;		/*0x06 */
+} MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR,
+	*PTR_MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR,
+	Mpi2TargetCommandBufferReplyDescriptor_t,
+	*pMpi2TargetCommandBufferReplyDescriptor_t;
+
+/*defines for Flags field */
+#define MPI2_RPY_DESCRIPT_TCB_FLAGS_PHYNUM_MASK     (0x3F)
+
+/*RAID Accelerator Success Reply Descriptor */
+typedef struct _MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR {
+	U8 ReplyFlags;		/*0x00 */
+	U8 MSIxIndex;		/*0x01 */
+	U16 SMID;		/*0x02 */
+	U32 Reserved;		/*0x04 */
+} MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
+	*PTR_MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
+	Mpi2RAIDAcceleratorSuccessReplyDescriptor_t,
+	*pMpi2RAIDAcceleratorSuccessReplyDescriptor_t;
+
+/*Fast Path SCSI IO Success Reply Descriptor */
+typedef MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR
+	MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
+	*PTR_MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
+	Mpi25FastPathSCSIIOSuccessReplyDescriptor_t,
+	*pMpi25FastPathSCSIIOSuccessReplyDescriptor_t;
+
+/*PCIe Encapsulated Success Reply Descriptor */
+typedef MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR
+	MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR,
+	*PTR_MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR,
+	Mpi26PCIeEncapsulatedSuccessReplyDescriptor_t,
+	*pMpi26PCIeEncapsulatedSuccessReplyDescriptor_t;
+
+/*union of Reply Descriptors */
+typedef union _MPI2_REPLY_DESCRIPTORS_UNION {
+	MPI2_DEFAULT_REPLY_DESCRIPTOR Default;
+	MPI2_ADDRESS_REPLY_DESCRIPTOR AddressReply;
+	MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR SCSIIOSuccess;
+	MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess;
+	MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer;
+	MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR RAIDAcceleratorSuccess;
+	MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR FastPathSCSIIOSuccess;
+	MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR
+						PCIeEncapsulatedSuccess;
+	U64 Words;
+} MPI2_REPLY_DESCRIPTORS_UNION,
+	*PTR_MPI2_REPLY_DESCRIPTORS_UNION,
+	Mpi2ReplyDescriptorsUnion_t,
+	*pMpi2ReplyDescriptorsUnion_t;
+
+/*****************************************************************************
+*
+*       Message Functions
+*
+*****************************************************************************/
+
+#define MPI2_FUNCTION_SCSI_IO_REQUEST		    (0x00)
+#define MPI2_FUNCTION_SCSI_TASK_MGMT		    (0x01)
+#define MPI2_FUNCTION_IOC_INIT                      (0x02)
+#define MPI2_FUNCTION_IOC_FACTS                     (0x03)
+#define MPI2_FUNCTION_CONFIG                        (0x04)
+#define MPI2_FUNCTION_PORT_FACTS                    (0x05)
+#define MPI2_FUNCTION_PORT_ENABLE                   (0x06)
+#define MPI2_FUNCTION_EVENT_NOTIFICATION            (0x07)
+#define MPI2_FUNCTION_EVENT_ACK                     (0x08)
+#define MPI2_FUNCTION_FW_DOWNLOAD                   (0x09)
+#define MPI2_FUNCTION_TARGET_ASSIST                 (0x0B)
+#define MPI2_FUNCTION_TARGET_STATUS_SEND            (0x0C)
+#define MPI2_FUNCTION_TARGET_MODE_ABORT             (0x0D)
+#define MPI2_FUNCTION_FW_UPLOAD                     (0x12)
+#define MPI2_FUNCTION_RAID_ACTION                   (0x15)
+#define MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH      (0x16)
+#define MPI2_FUNCTION_TOOLBOX                       (0x17)
+#define MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR      (0x18)
+#define MPI2_FUNCTION_SMP_PASSTHROUGH               (0x1A)
+#define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL           (0x1B)
+#define MPI2_FUNCTION_IO_UNIT_CONTROL               (0x1B)
+#define MPI2_FUNCTION_SATA_PASSTHROUGH              (0x1C)
+#define MPI2_FUNCTION_DIAG_BUFFER_POST              (0x1D)
+#define MPI2_FUNCTION_DIAG_RELEASE                  (0x1E)
+#define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST      (0x24)
+#define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST      (0x25)
+#define MPI2_FUNCTION_RAID_ACCELERATOR              (0x2C)
+#define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION   (0x2F)
+#define MPI2_FUNCTION_PWR_MGMT_CONTROL              (0x30)
+#define MPI2_FUNCTION_SEND_HOST_MESSAGE             (0x31)
+#define MPI2_FUNCTION_NVME_ENCAPSULATED             (0x33)
+#define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC          (0xF0)
+#define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC          (0xFF)
+
+/*Doorbell functions */
+#define MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET        (0x40)
+#define MPI2_FUNCTION_HANDSHAKE                     (0x42)
+
+/*****************************************************************************
+*
+*       IOC Status Values
+*
+*****************************************************************************/
+
+/*mask for IOCStatus status value */
+#define MPI2_IOCSTATUS_MASK                     (0x7FFF)
+
+/****************************************************************************
+* Common IOCStatus values for all replies
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_SUCCESS                      (0x0000)
+#define MPI2_IOCSTATUS_INVALID_FUNCTION             (0x0001)
+#define MPI2_IOCSTATUS_BUSY                         (0x0002)
+#define MPI2_IOCSTATUS_INVALID_SGL                  (0x0003)
+#define MPI2_IOCSTATUS_INTERNAL_ERROR               (0x0004)
+#define MPI2_IOCSTATUS_INVALID_VPID                 (0x0005)
+#define MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES       (0x0006)
+#define MPI2_IOCSTATUS_INVALID_FIELD                (0x0007)
+#define MPI2_IOCSTATUS_INVALID_STATE                (0x0008)
+#define MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED       (0x0009)
+/*MPI v2.6 and later */
+#define MPI2_IOCSTATUS_INSUFFICIENT_POWER           (0x000A)
+#define MPI2_IOCSTATUS_FAILURE                      (0x000F)
+
+/****************************************************************************
+* Config IOCStatus values
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_CONFIG_INVALID_ACTION        (0x0020)
+#define MPI2_IOCSTATUS_CONFIG_INVALID_TYPE          (0x0021)
+#define MPI2_IOCSTATUS_CONFIG_INVALID_PAGE          (0x0022)
+#define MPI2_IOCSTATUS_CONFIG_INVALID_DATA          (0x0023)
+#define MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS           (0x0024)
+#define MPI2_IOCSTATUS_CONFIG_CANT_COMMIT           (0x0025)
+
+/****************************************************************************
+* SCSI IO Reply
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR         (0x0040)
+#define MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE       (0x0042)
+#define MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE        (0x0043)
+#define MPI2_IOCSTATUS_SCSI_DATA_OVERRUN            (0x0044)
+#define MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN           (0x0045)
+#define MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR           (0x0046)
+#define MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR          (0x0047)
+#define MPI2_IOCSTATUS_SCSI_TASK_TERMINATED         (0x0048)
+#define MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH       (0x0049)
+#define MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED        (0x004A)
+#define MPI2_IOCSTATUS_SCSI_IOC_TERMINATED          (0x004B)
+#define MPI2_IOCSTATUS_SCSI_EXT_TERMINATED          (0x004C)
+
+/****************************************************************************
+* For use by SCSI Initiator and SCSI Target end-to-end data protection
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_EEDP_GUARD_ERROR             (0x004D)
+#define MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR           (0x004E)
+#define MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR           (0x004F)
+
+/****************************************************************************
+* SCSI Target values
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX      (0x0062)
+#define MPI2_IOCSTATUS_TARGET_ABORTED               (0x0063)
+#define MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE     (0x0064)
+#define MPI2_IOCSTATUS_TARGET_NO_CONNECTION         (0x0065)
+#define MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH   (0x006A)
+#define MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR     (0x006D)
+#define MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA   (0x006E)
+#define MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT          (0x006F)
+#define MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT       (0x0070)
+#define MPI2_IOCSTATUS_TARGET_NAK_RECEIVED          (0x0071)
+
+/****************************************************************************
+* Serial Attached SCSI values
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED       (0x0090)
+#define MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN         (0x0091)
+
+/****************************************************************************
+* Diagnostic Buffer Post / Diagnostic Release values
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED          (0x00A0)
+
+/****************************************************************************
+* RAID Accelerator values
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_RAID_ACCEL_ERROR             (0x00B0)
+
+/****************************************************************************
+* IOCStatus flag to indicate that log info is available
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE      (0x8000)
+
+/****************************************************************************
+* IOCLogInfo Types
+****************************************************************************/
+
+#define MPI2_IOCLOGINFO_TYPE_MASK               (0xF0000000)
+#define MPI2_IOCLOGINFO_TYPE_SHIFT              (28)
+#define MPI2_IOCLOGINFO_TYPE_NONE               (0x0)
+#define MPI2_IOCLOGINFO_TYPE_SCSI               (0x1)
+#define MPI2_IOCLOGINFO_TYPE_FC                 (0x2)
+#define MPI2_IOCLOGINFO_TYPE_SAS                (0x3)
+#define MPI2_IOCLOGINFO_TYPE_ISCSI              (0x4)
+#define MPI2_IOCLOGINFO_LOG_DATA_MASK           (0x0FFFFFFF)
+
+/*****************************************************************************
+*
+*       Standard Message Structures
+*
+*****************************************************************************/
+
+/****************************************************************************
+*Request Message Header for all request messages
+****************************************************************************/
+
+typedef struct _MPI2_REQUEST_HEADER {
+	U16 FunctionDependent1;	/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 FunctionDependent2;	/*0x04 */
+	U8 FunctionDependent3;	/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved1;		/*0x0A */
+} MPI2_REQUEST_HEADER, *PTR_MPI2_REQUEST_HEADER,
+	MPI2RequestHeader_t, *pMPI2RequestHeader_t;
+
+/****************************************************************************
+* Default Reply
+****************************************************************************/
+
+typedef struct _MPI2_DEFAULT_REPLY {
+	U16 FunctionDependent1;	/*0x00 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 FunctionDependent2;	/*0x04 */
+	U8 FunctionDependent3;	/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved1;		/*0x0A */
+	U16 FunctionDependent5;	/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+} MPI2_DEFAULT_REPLY, *PTR_MPI2_DEFAULT_REPLY,
+	MPI2DefaultReply_t, *pMPI2DefaultReply_t;
+
+/*common version structure/union used in messages and configuration pages */
+
+typedef struct _MPI2_VERSION_STRUCT {
+	U8 Dev;			/*0x00 */
+	U8 Unit;		/*0x01 */
+	U8 Minor;		/*0x02 */
+	U8 Major;		/*0x03 */
+} MPI2_VERSION_STRUCT;
+
+typedef union _MPI2_VERSION_UNION {
+	MPI2_VERSION_STRUCT Struct;
+	U32 Word;
+} MPI2_VERSION_UNION;
+
+/*LUN field defines, common to many structures */
+#define MPI2_LUN_FIRST_LEVEL_ADDRESSING             (0x0000FFFF)
+#define MPI2_LUN_SECOND_LEVEL_ADDRESSING            (0xFFFF0000)
+#define MPI2_LUN_THIRD_LEVEL_ADDRESSING             (0x0000FFFF)
+#define MPI2_LUN_FOURTH_LEVEL_ADDRESSING            (0xFFFF0000)
+#define MPI2_LUN_LEVEL_1_WORD                       (0xFF00)
+#define MPI2_LUN_LEVEL_1_DWORD                      (0x0000FF00)
+
+/*****************************************************************************
+*
+*       Fusion-MPT MPI Scatter Gather Elements
+*
+*****************************************************************************/
+
+/****************************************************************************
+* MPI Simple Element structures
+****************************************************************************/
+
+typedef struct _MPI2_SGE_SIMPLE32 {
+	U32 FlagsLength;
+	U32 Address;
+} MPI2_SGE_SIMPLE32, *PTR_MPI2_SGE_SIMPLE32,
+	Mpi2SGESimple32_t, *pMpi2SGESimple32_t;
+
+typedef struct _MPI2_SGE_SIMPLE64 {
+	U32 FlagsLength;
+	U64 Address;
+} MPI2_SGE_SIMPLE64, *PTR_MPI2_SGE_SIMPLE64,
+	Mpi2SGESimple64_t, *pMpi2SGESimple64_t;
+
+typedef struct _MPI2_SGE_SIMPLE_UNION {
+	U32 FlagsLength;
+	union {
+		U32 Address32;
+		U64 Address64;
+	} u;
+} MPI2_SGE_SIMPLE_UNION,
+	*PTR_MPI2_SGE_SIMPLE_UNION,
+	Mpi2SGESimpleUnion_t,
+	*pMpi2SGESimpleUnion_t;
+
+/****************************************************************************
+* MPI Chain Element structures - for MPI v2.0 products only
+****************************************************************************/
+
+typedef struct _MPI2_SGE_CHAIN32 {
+	U16 Length;
+	U8 NextChainOffset;
+	U8 Flags;
+	U32 Address;
+} MPI2_SGE_CHAIN32, *PTR_MPI2_SGE_CHAIN32,
+	Mpi2SGEChain32_t, *pMpi2SGEChain32_t;
+
+typedef struct _MPI2_SGE_CHAIN64 {
+	U16 Length;
+	U8 NextChainOffset;
+	U8 Flags;
+	U64 Address;
+} MPI2_SGE_CHAIN64, *PTR_MPI2_SGE_CHAIN64,
+	Mpi2SGEChain64_t, *pMpi2SGEChain64_t;
+
+typedef struct _MPI2_SGE_CHAIN_UNION {
+	U16 Length;
+	U8 NextChainOffset;
+	U8 Flags;
+	union {
+		U32 Address32;
+		U64 Address64;
+	} u;
+} MPI2_SGE_CHAIN_UNION,
+	*PTR_MPI2_SGE_CHAIN_UNION,
+	Mpi2SGEChainUnion_t,
+	*pMpi2SGEChainUnion_t;
+
+/****************************************************************************
+* MPI Transaction Context Element structures - for MPI v2.0 products only
+****************************************************************************/
+
+typedef struct _MPI2_SGE_TRANSACTION32 {
+	U8 Reserved;
+	U8 ContextSize;
+	U8 DetailsLength;
+	U8 Flags;
+	U32 TransactionContext[1];
+	U32 TransactionDetails[1];
+} MPI2_SGE_TRANSACTION32,
+	*PTR_MPI2_SGE_TRANSACTION32,
+	Mpi2SGETransaction32_t,
+	*pMpi2SGETransaction32_t;
+
+typedef struct _MPI2_SGE_TRANSACTION64 {
+	U8 Reserved;
+	U8 ContextSize;
+	U8 DetailsLength;
+	U8 Flags;
+	U32 TransactionContext[2];
+	U32 TransactionDetails[1];
+} MPI2_SGE_TRANSACTION64,
+	*PTR_MPI2_SGE_TRANSACTION64,
+	Mpi2SGETransaction64_t,
+	*pMpi2SGETransaction64_t;
+
+typedef struct _MPI2_SGE_TRANSACTION96 {
+	U8 Reserved;
+	U8 ContextSize;
+	U8 DetailsLength;
+	U8 Flags;
+	U32 TransactionContext[3];
+	U32 TransactionDetails[1];
+} MPI2_SGE_TRANSACTION96, *PTR_MPI2_SGE_TRANSACTION96,
+	Mpi2SGETransaction96_t, *pMpi2SGETransaction96_t;
+
+typedef struct _MPI2_SGE_TRANSACTION128 {
+	U8 Reserved;
+	U8 ContextSize;
+	U8 DetailsLength;
+	U8 Flags;
+	U32 TransactionContext[4];
+	U32 TransactionDetails[1];
+} MPI2_SGE_TRANSACTION128, *PTR_MPI2_SGE_TRANSACTION128,
+	Mpi2SGETransaction_t128, *pMpi2SGETransaction_t128;
+
+typedef struct _MPI2_SGE_TRANSACTION_UNION {
+	U8 Reserved;
+	U8 ContextSize;
+	U8 DetailsLength;
+	U8 Flags;
+	union {
+		U32 TransactionContext32[1];
+		U32 TransactionContext64[2];
+		U32 TransactionContext96[3];
+		U32 TransactionContext128[4];
+	} u;
+	U32 TransactionDetails[1];
+} MPI2_SGE_TRANSACTION_UNION,
+	*PTR_MPI2_SGE_TRANSACTION_UNION,
+	Mpi2SGETransactionUnion_t,
+	*pMpi2SGETransactionUnion_t;
+
+/****************************************************************************
+* MPI SGE union for IO SGL's - for MPI v2.0 products only
+****************************************************************************/
+
+typedef struct _MPI2_MPI_SGE_IO_UNION {
+	union {
+		MPI2_SGE_SIMPLE_UNION Simple;
+		MPI2_SGE_CHAIN_UNION Chain;
+	} u;
+} MPI2_MPI_SGE_IO_UNION, *PTR_MPI2_MPI_SGE_IO_UNION,
+	Mpi2MpiSGEIOUnion_t, *pMpi2MpiSGEIOUnion_t;
+
+/****************************************************************************
+* MPI SGE union for SGL's with Simple and Transaction elements - for MPI v2.0 products only
+****************************************************************************/
+
+typedef struct _MPI2_SGE_TRANS_SIMPLE_UNION {
+	union {
+		MPI2_SGE_SIMPLE_UNION Simple;
+		MPI2_SGE_TRANSACTION_UNION Transaction;
+	} u;
+} MPI2_SGE_TRANS_SIMPLE_UNION,
+	*PTR_MPI2_SGE_TRANS_SIMPLE_UNION,
+	Mpi2SGETransSimpleUnion_t,
+	*pMpi2SGETransSimpleUnion_t;
+
+/****************************************************************************
+* All MPI SGE types union
+****************************************************************************/
+
+typedef struct _MPI2_MPI_SGE_UNION {
+	union {
+		MPI2_SGE_SIMPLE_UNION Simple;
+		MPI2_SGE_CHAIN_UNION Chain;
+		MPI2_SGE_TRANSACTION_UNION Transaction;
+	} u;
+} MPI2_MPI_SGE_UNION, *PTR_MPI2_MPI_SGE_UNION,
+	Mpi2MpiSgeUnion_t, *pMpi2MpiSgeUnion_t;
+
+/****************************************************************************
+* MPI SGE field definition and masks
+****************************************************************************/
+
+/*Flags field bit definitions */
+
+#define MPI2_SGE_FLAGS_LAST_ELEMENT             (0x80)
+#define MPI2_SGE_FLAGS_END_OF_BUFFER            (0x40)
+#define MPI2_SGE_FLAGS_ELEMENT_TYPE_MASK        (0x30)
+#define MPI2_SGE_FLAGS_LOCAL_ADDRESS            (0x08)
+#define MPI2_SGE_FLAGS_DIRECTION                (0x04)
+#define MPI2_SGE_FLAGS_ADDRESS_SIZE             (0x02)
+#define MPI2_SGE_FLAGS_END_OF_LIST              (0x01)
+
+#define MPI2_SGE_FLAGS_SHIFT                    (24)
+
+#define MPI2_SGE_LENGTH_MASK                    (0x00FFFFFF)
+#define MPI2_SGE_CHAIN_LENGTH_MASK              (0x0000FFFF)
+
+/*Element Type */
+
+#define MPI2_SGE_FLAGS_TRANSACTION_ELEMENT      (0x00)
+#define MPI2_SGE_FLAGS_SIMPLE_ELEMENT           (0x10)
+#define MPI2_SGE_FLAGS_CHAIN_ELEMENT            (0x30)
+#define MPI2_SGE_FLAGS_ELEMENT_MASK             (0x30)
+
+/*Address location */
+
+#define MPI2_SGE_FLAGS_SYSTEM_ADDRESS           (0x00)
+
+/*Direction */
+
+#define MPI2_SGE_FLAGS_IOC_TO_HOST              (0x00)
+#define MPI2_SGE_FLAGS_HOST_TO_IOC              (0x04)
+
+#define MPI2_SGE_FLAGS_DEST (MPI2_SGE_FLAGS_IOC_TO_HOST)
+#define MPI2_SGE_FLAGS_SOURCE (MPI2_SGE_FLAGS_HOST_TO_IOC)
+
+/*Address Size */
+
+#define MPI2_SGE_FLAGS_32_BIT_ADDRESSING        (0x00)
+#define MPI2_SGE_FLAGS_64_BIT_ADDRESSING        (0x02)
+
+/*Context Size */
+
+#define MPI2_SGE_FLAGS_32_BIT_CONTEXT           (0x00)
+#define MPI2_SGE_FLAGS_64_BIT_CONTEXT           (0x02)
+#define MPI2_SGE_FLAGS_96_BIT_CONTEXT           (0x04)
+#define MPI2_SGE_FLAGS_128_BIT_CONTEXT          (0x06)
+
+#define MPI2_SGE_CHAIN_OFFSET_MASK              (0x00FF0000)
+#define MPI2_SGE_CHAIN_OFFSET_SHIFT             (16)
+
+/****************************************************************************
+* MPI SGE operation Macros
+****************************************************************************/
+
+/*SIMPLE FlagsLength manipulations... */
+#define MPI2_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_SGE_FLAGS_SHIFT)
+#define MPI2_SGE_GET_FLAGS(f) (((f) & ~MPI2_SGE_LENGTH_MASK) >> \
+					MPI2_SGE_FLAGS_SHIFT)
+#define MPI2_SGE_LENGTH(f) ((f) & MPI2_SGE_LENGTH_MASK)
+#define MPI2_SGE_CHAIN_LENGTH(f) ((f) & MPI2_SGE_CHAIN_LENGTH_MASK)
+
+#define MPI2_SGE_SET_FLAGS_LENGTH(f, l) (MPI2_SGE_SET_FLAGS(f) | \
+					MPI2_SGE_LENGTH(l))
+
+#define MPI2_pSGE_GET_FLAGS(psg) MPI2_SGE_GET_FLAGS((psg)->FlagsLength)
+#define MPI2_pSGE_GET_LENGTH(psg) MPI2_SGE_LENGTH((psg)->FlagsLength)
+#define MPI2_pSGE_SET_FLAGS_LENGTH(psg, f, l) ((psg)->FlagsLength = \
+					MPI2_SGE_SET_FLAGS_LENGTH(f, l))
+
+/*CAUTION - The following are READ-MODIFY-WRITE! */
+#define MPI2_pSGE_SET_FLAGS(psg, f) ((psg)->FlagsLength |= \
+					MPI2_SGE_SET_FLAGS(f))
+#define MPI2_pSGE_SET_LENGTH(psg, l) ((psg)->FlagsLength |= \
+					MPI2_SGE_LENGTH(l))
+
+#define MPI2_GET_CHAIN_OFFSET(x) ((x & MPI2_SGE_CHAIN_OFFSET_MASK) >> \
+					MPI2_SGE_CHAIN_OFFSET_SHIFT)
+
+/*****************************************************************************
+*
+*       Fusion-MPT IEEE Scatter Gather Elements
+*
+*****************************************************************************/
+
+/****************************************************************************
+* IEEE Simple Element structures
+****************************************************************************/
+
+/*MPI2_IEEE_SGE_SIMPLE32 is for MPI v2.0 products only */
+typedef struct _MPI2_IEEE_SGE_SIMPLE32 {
+	U32 Address;
+	U32 FlagsLength;
+} MPI2_IEEE_SGE_SIMPLE32, *PTR_MPI2_IEEE_SGE_SIMPLE32,
+	Mpi2IeeeSgeSimple32_t, *pMpi2IeeeSgeSimple32_t;
+
+typedef struct _MPI2_IEEE_SGE_SIMPLE64 {
+	U64 Address;
+	U32 Length;
+	U16 Reserved1;
+	U8 Reserved2;
+	U8 Flags;
+} MPI2_IEEE_SGE_SIMPLE64, *PTR_MPI2_IEEE_SGE_SIMPLE64,
+	Mpi2IeeeSgeSimple64_t, *pMpi2IeeeSgeSimple64_t;
+
+typedef union _MPI2_IEEE_SGE_SIMPLE_UNION {
+	MPI2_IEEE_SGE_SIMPLE32 Simple32;
+	MPI2_IEEE_SGE_SIMPLE64 Simple64;
+} MPI2_IEEE_SGE_SIMPLE_UNION,
+	*PTR_MPI2_IEEE_SGE_SIMPLE_UNION,
+	Mpi2IeeeSgeSimpleUnion_t,
+	*pMpi2IeeeSgeSimpleUnion_t;
+
+/****************************************************************************
+* IEEE Chain Element structures
+****************************************************************************/
+
+/*MPI2_IEEE_SGE_CHAIN32 is for MPI v2.0 products only */
+typedef MPI2_IEEE_SGE_SIMPLE32 MPI2_IEEE_SGE_CHAIN32;
+
+/*MPI2_IEEE_SGE_CHAIN64 is for MPI v2.0 products only */
+typedef MPI2_IEEE_SGE_SIMPLE64 MPI2_IEEE_SGE_CHAIN64;
+
+typedef union _MPI2_IEEE_SGE_CHAIN_UNION {
+	MPI2_IEEE_SGE_CHAIN32 Chain32;
+	MPI2_IEEE_SGE_CHAIN64 Chain64;
+} MPI2_IEEE_SGE_CHAIN_UNION,
+	*PTR_MPI2_IEEE_SGE_CHAIN_UNION,
+	Mpi2IeeeSgeChainUnion_t,
+	*pMpi2IeeeSgeChainUnion_t;
+
+/*MPI25_IEEE_SGE_CHAIN64 is for MPI v2.5 and later */
+typedef struct _MPI25_IEEE_SGE_CHAIN64 {
+	U64 Address;
+	U32 Length;
+	U16 Reserved1;
+	U8 NextChainOffset;
+	U8 Flags;
+} MPI25_IEEE_SGE_CHAIN64,
+	*PTR_MPI25_IEEE_SGE_CHAIN64,
+	Mpi25IeeeSgeChain64_t,
+	*pMpi25IeeeSgeChain64_t;
+
+/****************************************************************************
+* All IEEE SGE types union
+****************************************************************************/
+
+/*MPI2_IEEE_SGE_UNION is for MPI v2.0 products only */
+typedef struct _MPI2_IEEE_SGE_UNION {
+	union {
+		MPI2_IEEE_SGE_SIMPLE_UNION Simple;
+		MPI2_IEEE_SGE_CHAIN_UNION Chain;
+	} u;
+} MPI2_IEEE_SGE_UNION, *PTR_MPI2_IEEE_SGE_UNION,
+	Mpi2IeeeSgeUnion_t, *pMpi2IeeeSgeUnion_t;
+
+/****************************************************************************
+* IEEE SGE union for IO SGL's
+****************************************************************************/
+
+typedef union _MPI25_SGE_IO_UNION {
+	MPI2_IEEE_SGE_SIMPLE64 IeeeSimple;
+	MPI25_IEEE_SGE_CHAIN64 IeeeChain;
+} MPI25_SGE_IO_UNION, *PTR_MPI25_SGE_IO_UNION,
+	Mpi25SGEIOUnion_t, *pMpi25SGEIOUnion_t;
+
+/****************************************************************************
+* IEEE SGE field definitions and masks
+****************************************************************************/
+
+/*Flags field bit definitions */
+
+#define MPI2_IEEE_SGE_FLAGS_ELEMENT_TYPE_MASK   (0x80)
+#define MPI25_IEEE_SGE_FLAGS_END_OF_LIST        (0x40)
+
+#define MPI2_IEEE32_SGE_FLAGS_SHIFT             (24)
+
+#define MPI2_IEEE32_SGE_LENGTH_MASK             (0x00FFFFFF)
+
+/*Element Type */
+
+#define MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT      (0x00)
+#define MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT       (0x80)
+
+/*Next Segment Format */
+
+#define MPI26_IEEE_SGE_FLAGS_NSF_MASK           (0x1C)
+#define MPI26_IEEE_SGE_FLAGS_NSF_MPI_IEEE       (0x00)
+#define MPI26_IEEE_SGE_FLAGS_NSF_NVME_PRP       (0x08)
+#define MPI26_IEEE_SGE_FLAGS_NSF_NVME_SGL       (0x10)
+
+/*Data Location Address Space */
+
+#define MPI2_IEEE_SGE_FLAGS_ADDR_MASK           (0x03)
+#define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR         (0x00)
+#define MPI2_IEEE_SGE_FLAGS_IOCDDR_ADDR         (0x01)
+#define MPI2_IEEE_SGE_FLAGS_IOCPLB_ADDR         (0x02)
+#define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR      (0x03)
+#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR   (0x03)
+#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR \
+	 (MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR)
+#define MPI26_IEEE_SGE_FLAGS_IOCCTL_ADDR        (0x02)
+
+/****************************************************************************
+* IEEE SGE operation Macros
+****************************************************************************/
+
+/*SIMPLE FlagsLength manipulations... */
+#define MPI2_IEEE32_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_IEEE32_SGE_FLAGS_SHIFT)
+#define MPI2_IEEE32_SGE_GET_FLAGS(f) (((f) & ~MPI2_IEEE32_SGE_LENGTH_MASK) \
+				 >> MPI2_IEEE32_SGE_FLAGS_SHIFT)
+#define MPI2_IEEE32_SGE_LENGTH(f)    ((f) & MPI2_IEEE32_SGE_LENGTH_MASK)
+
+#define MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f, l) (MPI2_IEEE32_SGE_SET_FLAGS(f) |\
+						 MPI2_IEEE32_SGE_LENGTH(l))
+
+#define MPI2_IEEE32_pSGE_GET_FLAGS(psg) \
+			MPI2_IEEE32_SGE_GET_FLAGS((psg)->FlagsLength)
+#define MPI2_IEEE32_pSGE_GET_LENGTH(psg) \
+			MPI2_IEEE32_SGE_LENGTH((psg)->FlagsLength)
+#define MPI2_IEEE32_pSGE_SET_FLAGS_LENGTH(psg, f, l) ((psg)->FlagsLength = \
+					MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f, l))
+
+/*CAUTION - The following are READ-MODIFY-WRITE! */
+#define MPI2_IEEE32_pSGE_SET_FLAGS(psg, f) ((psg)->FlagsLength |= \
+					MPI2_IEEE32_SGE_SET_FLAGS(f))
+#define MPI2_IEEE32_pSGE_SET_LENGTH(psg, l) ((psg)->FlagsLength |= \
+					MPI2_IEEE32_SGE_LENGTH(l))
+
+/*****************************************************************************
+*
+*       Fusion-MPT MPI/IEEE Scatter Gather Unions
+*
+*****************************************************************************/
+
+typedef union _MPI2_SIMPLE_SGE_UNION {
+	MPI2_SGE_SIMPLE_UNION MpiSimple;
+	MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
+} MPI2_SIMPLE_SGE_UNION, *PTR_MPI2_SIMPLE_SGE_UNION,
+	Mpi2SimpleSgeUntion_t, *pMpi2SimpleSgeUntion_t;
+
+typedef union _MPI2_SGE_IO_UNION {
+	MPI2_SGE_SIMPLE_UNION MpiSimple;
+	MPI2_SGE_CHAIN_UNION MpiChain;
+	MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
+	MPI2_IEEE_SGE_CHAIN_UNION IeeeChain;
+} MPI2_SGE_IO_UNION, *PTR_MPI2_SGE_IO_UNION,
+	Mpi2SGEIOUnion_t, *pMpi2SGEIOUnion_t;
+
+/****************************************************************************
+*
+* Values for SGLFlags field, used in many request messages with an SGL
+*
+****************************************************************************/
+
+/*values for MPI SGL Data Location Address Space subfield */
+#define MPI2_SGLFLAGS_ADDRESS_SPACE_MASK            (0x0C)
+#define MPI2_SGLFLAGS_SYSTEM_ADDRESS_SPACE          (0x00)
+#define MPI2_SGLFLAGS_IOCDDR_ADDRESS_SPACE          (0x04)
+#define MPI2_SGLFLAGS_IOCPLB_ADDRESS_SPACE          (0x08)
+#define MPI26_SGLFLAGS_IOCPLB_ADDRESS_SPACE         (0x08)
+#define MPI2_SGLFLAGS_IOCPLBNTA_ADDRESS_SPACE       (0x0C)
+/*values for SGL Type subfield */
+#define MPI2_SGLFLAGS_SGL_TYPE_MASK                 (0x03)
+#define MPI2_SGLFLAGS_SGL_TYPE_MPI                  (0x00)
+#define MPI2_SGLFLAGS_SGL_TYPE_IEEE32               (0x01)
+#define MPI2_SGLFLAGS_SGL_TYPE_IEEE64               (0x02)
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
new file mode 100644
index 0000000000..4d0be5ab98
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
@@ -0,0 +1,4093 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2000-2020 Broadcom Inc. All rights reserved.
+ *
+ *
+ *          Name:  mpi2_cnfg.h
+ *         Title:  MPI Configuration messages and pages
+ * Creation Date:  November 10, 2006
+ *
+ *    mpi2_cnfg.h Version:  02.00.47
+ *
+ * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
+ *       prefix are for use only on MPI v2.5 products, and must not be used
+ *       with MPI v2.0 products. Unless otherwise noted, names beginning with
+ *       MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
+ *
+ * Version History
+ * ---------------
+ *
+ * Date      Version   Description
+ * --------  --------  ------------------------------------------------------
+ * 04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 06-04-07  02.00.01  Added defines for SAS IO Unit Page 2 PhyFlags.
+ *                     Added Manufacturing Page 11.
+ *                     Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE
+ *                     define.
+ * 06-26-07  02.00.02  Adding generic structure for product-specific
+ *                     Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS.
+ *                     Rework of BIOS Page 2 configuration page.
+ *                     Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the
+ *                     forms.
+ *                     Added configuration pages IOC Page 8 and Driver
+ *                     Persistent Mapping Page 0.
+ * 08-31-07  02.00.03  Modified configuration pages dealing with Integrated
+ *                     RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1,
+ *                     RAID Physical Disk Pages 0 and 1, RAID Configuration
+ *                     Page 0).
+ *                     Added new value for AccessStatus field of SAS Device
+ *                     Page 0 (_SATA_NEEDS_INITIALIZATION).
+ * 10-31-07  02.00.04  Added missing SEPDevHandle field to
+ *                     MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
+ * 12-18-07  02.00.05  Modified IO Unit Page 0 to use 32-bit version fields for
+ *                     NVDATA.
+ *                     Modified IOC Page 7 to use masks and added field for
+ *                     SASBroadcastPrimitiveMasks.
+ *                     Added MPI2_CONFIG_PAGE_BIOS_4.
+ *                     Added MPI2_CONFIG_PAGE_LOG_0.
+ * 02-29-08  02.00.06  Modified various names to make them 32-character unique.
+ *                     Added SAS Device IDs.
+ *                     Updated Integrated RAID configuration pages including
+ *                     Manufacturing Page 4, IOC Page 6, and RAID Configuration
+ *                     Page 0.
+ * 05-21-08  02.00.07  Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA.
+ *                     Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION.
+ *                     Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING.
+ *                     Added missing MaxNumRoutedSasAddresses field to
+ *                     MPI2_CONFIG_PAGE_EXPANDER_0.
+ *                     Added SAS Port Page 0.
+ *                     Modified structure layout for
+ *                     MPI2_CONFIG_PAGE_DRIVER_MAPPING_0.
+ * 06-27-08  02.00.08  Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use
+ *                     MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array.
+ * 10-02-08  02.00.09  Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF
+ *                     to 0x000000FF.
+ *                     Added two new values for the Physical Disk Coercion Size
+ *                     bits in the Flags field of Manufacturing Page 4.
+ *                     Added product-specific Manufacturing pages 16 to 31.
+ *                     Modified Flags bits for controlling write cache on SATA
+ *                     drives in IO Unit Page 1.
+ *                     Added new bit to AdditionalControlFlags of SAS IO Unit
+ *                     Page 1 to control Invalid Topology Correction.
+ *                     Added additional defines for RAID Volume Page 0
+ *                     VolumeStatusFlags field.
+ *                     Modified meaning of RAID Volume Page 0 VolumeSettings
+ *                     define for auto-configure of hot-swap drives.
+ *                     Added SupportedPhysDisks field to RAID Volume Page 1 and
+ *                     added related defines.
+ *                     Added PhysDiskAttributes field (and related defines) to
+ *                     RAID Physical Disk Page 0.
+ *                     Added MPI2_SAS_PHYINFO_PHY_VACANT define.
+ *                     Added three new DiscoveryStatus bits for SAS IO Unit
+ *                     Page 0 and SAS Expander Page 0.
+ *                     Removed multiplexing information from SAS IO Unit pages.
+ *                     Added BootDeviceWaitTime field to SAS IO Unit Page 4.
+ *                     Removed Zone Address Resolved bit from PhyInfo and from
+ *                     Expander Page 0 Flags field.
+ *                     Added two new AccessStatus values to SAS Device Page 0
+ *                     for indicating routing problems. Added 3 reserved words
+ *                     to this page.
+ * 01-19-09  02.00.10  Fixed defines for GPIOVal field of IO Unit Page 3.
+ *                     Inserted missing reserved field into structure for IOC
+ *                     Page 6.
+ *                     Added more pending task bits to RAID Volume Page 0
+ *                     VolumeStatusFlags defines.
+ *                     Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define.
+ *                     Added a new DiscoveryStatus bit for SAS IO Unit Page 0
+ *                     and SAS Expander Page 0 to flag a downstream initiator
+ *                     when in simplified routing mode.
+ *                     Removed SATA Init Failure defines for DiscoveryStatus
+ *                     fields of SAS IO Unit Page 0 and SAS Expander Page 0.
+ *                     Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
+ *                     Added PortGroups, DmaGroup, and ControlGroup fields to
+ *                     SAS Device Page 0.
+ * 05-06-09  02.00.11  Added structures and defines for IO Unit Page 5 and IO
+ *                     Unit Page 6.
+ *                     Added expander reduced functionality data to SAS
+ *                     Expander Page 0.
+ *                     Added SAS PHY Page 2 and SAS PHY Page 3.
+ * 07-30-09  02.00.12  Added IO Unit Page 7.
+ *                     Added new device ids.
+ *                     Added SAS IO Unit Page 5.
+ *                     Added partial and slumber power management capable flags
+ *                     to SAS Device Page 0 Flags field.
+ *                     Added PhyInfo defines for power condition.
+ *                     Added Ethernet configuration pages.
+ * 10-28-09  02.00.13  Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
+ *                     Added SAS PHY Page 4 structure and defines.
+ * 02-10-10  02.00.14  Modified the comments for the configuration page
+ *                     structures that contain an array of data. The host
+ *                     should use the "count" field in the page data (e.g. the
+ *                     NumPhys field) to determine the number of valid elements
+ *                     in the array.
+ *                     Added/modified some MPI2_MFGPAGE_DEVID_SAS defines.
+ *                     Added PowerManagementCapabilities to IO Unit Page 7.
+ *                     Added PortWidthModGroup field to
+ *                     MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS.
+ *                     Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines.
+ *                     Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines.
+ *                     Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines.
+ * 05-12-10  02.00.15  Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT
+ *                     define.
+ *                     Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define.
+ *                     Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define.
+ * 08-11-10  02.00.16  Removed IO Unit Page 1 device path (multi-pathing)
+ *                     defines.
+ * 11-10-10  02.00.17  Added ReceptacleID field (replacing Reserved1) to
+ *                     MPI2_MANPAGE7_CONNECTOR_INFO and reworked defines for
+ *                     the Pinout field.
+ *                     Added BoardTemperature and BoardTemperatureUnits fields
+ *                     to MPI2_CONFIG_PAGE_IO_UNIT_7.
+ *                     Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define
+ *                     and MPI2_CONFIG_PAGE_EXT_MAN_PS structure.
+ * 02-23-11  02.00.18  Added ProxyVF_ID field to MPI2_CONFIG_REQUEST.
+ *                     Added IO Unit Page 8, IO Unit Page 9,
+ *                     and IO Unit Page 10.
+ *                     Added SASNotifyPrimitiveMasks field to
+ *                     MPI2_CONFIG_PAGE_IOC_7.
+ * 03-09-11  02.00.19  Fixed IO Unit Page 10 (to match the spec).
+ * 05-25-11  02.00.20  Cleaned up a few comments.
+ * 08-24-11  02.00.21  Marked the IO Unit Page 7 PowerManagementCapabilities
+ *                     for PCIe link as obsolete.
+ *                     Added SpinupFlags field containing a Disable Spin-up bit
+ *                     to the MPI2_SAS_IOUNIT4_SPINUP_GROUP fields of SAS IO
+ *                     Unit Page 4.
+ * 11-18-11  02.00.22  Added define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT.
+ *                     Added UEFIVersion field to BIOS Page 1 and defined new
+ *                     BiosOptions bits.
+ *                     Incorporating additions for MPI v2.5.
+ * 11-27-12  02.00.23  Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER.
+ *                     Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID.
+ * 12-20-12  02.00.24  Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as
+ *                     obsolete for MPI v2.5 and later.
+ *                     Added some defines for 12G SAS speeds.
+ * 04-09-13  02.00.25  Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK.
+ *                     Fixed MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS to
+ *                     match the specification.
+ * 08-19-13  02.00.26  Added reserved words to MPI2_CONFIG_PAGE_IO_UNIT_7 for
+ *			future use.
+ * 12-05-13  02.00.27  Added MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL for
+ *		       MPI2_CONFIG_PAGE_MAN_7.
+ *		       Added EnclosureLevel and ConnectorName fields to
+ *		       MPI2_CONFIG_PAGE_SAS_DEV_0.
+ *		       Added MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID for
+ *		       MPI2_CONFIG_PAGE_SAS_DEV_0.
+ *		       Added EnclosureLevel field to
+ *		       MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
+ *		       Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for
+ *		       MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
+ * 01-08-14  02.00.28  Added more defines for the BiosOptions field of
+ *		       MPI2_CONFIG_PAGE_BIOS_1.
+ * 06-13-14  02.00.29  Added SSUTimeout field to MPI2_CONFIG_PAGE_BIOS_1, and
+ *                     more defines for the BiosOptions field.
+ * 11-18-14  02.00.30  Updated copyright information.
+ *                     Added MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG.
+ *                     Added AdapterOrderAux fields to BIOS Page 3.
+ * 03-16-15  02.00.31  Updated for MPI v2.6.
+ *                     Added Flags field to IO Unit Page 7.
+ *                     Added new SAS Phy Event codes
+ * 05-25-15  02.00.33  Added more defines for the BiosOptions field of
+ *                     MPI2_CONFIG_PAGE_BIOS_1.
+ * 08-25-15  02.00.34  Bumped Header Version.
+ * 12-18-15  02.00.35  Added SATADeviceWaitTime to SAS IO Unit Page 4.
+ * 01-21-16  02.00.36  Added/modified MPI2_MFGPAGE_DEVID_SAS defines.
+ *                     Added Link field to PCIe Link Pages
+ *                     Added EnclosureLevel and ConnectorName to PCIe
+ *                     Device Page 0.
+ *                     Added define for PCIE IoUnit page 1 max rate shift.
+ *                     Added comment for reserved ExtPageTypes.
+ *                     Added SAS 4 22.5 gbs speed support.
+ *                     Added PCIe 4 16.0 GT/sec speec support.
+ *                     Removed AHCI support.
+ *                     Removed SOP support.
+ *                     Added NegotiatedLinkRate and NegotiatedPortWidth to
+ *                     PCIe device page 0.
+ * 04-10-16  02.00.37  Fixed MPI2_MFGPAGE_DEVID_SAS3616/3708 defines
+ * 07-01-16  02.00.38  Added Manufacturing page 7 Connector types.
+ *                     Changed declaration of ConnectorName in PCIe DevicePage0
+ *                     to match SAS DevicePage 0.
+ *                     Added SATADeviceWaitTime to IO Unit Page 11.
+ *                     Added MPI26_MFGPAGE_DEVID_SAS4008
+ *                     Added x16 PCIe width to IO Unit Page 7
+ *                     Added LINKFLAGS to control SRIS in PCIe IO Unit page 1
+ *                     phy data.
+ *                     Added InitStatus to PCIe IO Unit Page 1 header.
+ * 09-01-16  02.00.39  Added MPI26_CONFIG_PAGE_ENCLOSURE_0 and related defines.
+ *                     Added MPI26_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE and
+ *                     MPI26_ENCLOS_PGAD_FORM_HANDLE page address formats.
+ * 02-02-17  02.00.40  Added MPI2_MANPAGE7_SLOT_UNKNOWN.
+ *                     Added ChassisSlot field to SAS Enclosure Page 0.
+ *                     Added ChassisSlot Valid bit (bit 5) to the Flags field
+ *                     in SAS Enclosure Page 0.
+ * 06-13-17  02.00.41  Added MPI26_MFGPAGE_DEVID_SAS3816 and
+ *                     MPI26_MFGPAGE_DEVID_SAS3916 defines.
+ *                     Removed MPI26_MFGPAGE_DEVID_SAS4008 define.
+ *                     Added MPI26_PCIEIOUNIT1_LINKFLAGS_SRNS_EN define.
+ *                     Renamed PI26_PCIEIOUNIT1_LINKFLAGS_EN_SRIS to
+ *                     PI26_PCIEIOUNIT1_LINKFLAGS_SRIS_EN.
+ *                     Renamed MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SRIS to
+ *                     MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SEPARATE_REFCLK.
+ * 09-29-17  02.00.42  Added ControllerResetTO field to PCIe Device Page 2.
+ *                     Added NOIOB field to PCIe Device Page 2.
+ *                     Added MPI26_PCIEDEV2_CAP_DATA_BLK_ALIGN_AND_GRAN to
+ *                     the Capabilities field of PCIe Device Page 2.
+ * 07-22-18  02.00.43  Added defines for SAS3916 and SAS3816.
+ *                     Added WRiteCache defines to IO Unit Page 1.
+ *                     Added MaxEnclosureLevel to BIOS Page 1.
+ *                     Added OEMRD to SAS Enclosure Page 1.
+ *                     Added DMDReportPCIe to PCIe IO Unit Page 1.
+ *                     Added Flags field and flags for Retimers to
+ *                     PCIe Switch Page 1.
+ * 08-02-18  02.00.44  Added Slotx2, Slotx4 to ManPage 7.
+ * 08-15-18  02.00.45  Added ProductSpecific field at end of IOC Page 1
+ * 08-28-18  02.00.46  Added NVMs Write Cache flag to IOUnitPage1
+ *                     Added DMDReport Delay Time defines to
+ *                     PCIeIOUnitPage1
+ * --------------------------------------------------------------------------
+ * 08-02-18  02.00.44  Added Slotx2, Slotx4 to ManPage 7.
+ * 08-15-18  02.00.45  Added ProductSpecific field at end of IOC Page 1
+ * 08-28-18  02.00.46  Added NVMs Write Cache flag to IOUnitPage1
+ *                     Added DMDReport Delay Time defines to PCIeIOUnitPage1
+ * 12-17-18  02.00.47  Swap locations of Slotx2 and Slotx4 in ManPage 7.
+ * 08-01-19  02.00.49  Add MPI26_MANPAGE7_FLAG_X2_X4_SLOT_INFO_VALID
+ *                     Add MPI26_IOUNITPAGE1_NVME_WRCACHE_SHIFT
+ */
+
+#ifndef MPI2_CNFG_H
+#define MPI2_CNFG_H
+
+/*****************************************************************************
+*  Configuration Page Header and defines
+*****************************************************************************/
+
+/*Config Page Header */
+typedef struct _MPI2_CONFIG_PAGE_HEADER {
+	U8                 PageVersion;                /*0x00 */
+	U8                 PageLength;                 /*0x01 */
+	U8                 PageNumber;                 /*0x02 */
+	U8                 PageType;                   /*0x03 */
+} MPI2_CONFIG_PAGE_HEADER, *PTR_MPI2_CONFIG_PAGE_HEADER,
+	Mpi2ConfigPageHeader_t, *pMpi2ConfigPageHeader_t;
+
+typedef union _MPI2_CONFIG_PAGE_HEADER_UNION {
+	MPI2_CONFIG_PAGE_HEADER  Struct;
+	U8                       Bytes[4];
+	U16                      Word16[2];
+	U32                      Word32;
+} MPI2_CONFIG_PAGE_HEADER_UNION, *PTR_MPI2_CONFIG_PAGE_HEADER_UNION,
+	Mpi2ConfigPageHeaderUnion, *pMpi2ConfigPageHeaderUnion;
+
+/*Extended Config Page Header */
+typedef struct _MPI2_CONFIG_EXTENDED_PAGE_HEADER {
+	U8                  PageVersion;                /*0x00 */
+	U8                  Reserved1;                  /*0x01 */
+	U8                  PageNumber;                 /*0x02 */
+	U8                  PageType;                   /*0x03 */
+	U16                 ExtPageLength;              /*0x04 */
+	U8                  ExtPageType;                /*0x06 */
+	U8                  Reserved2;                  /*0x07 */
+} MPI2_CONFIG_EXTENDED_PAGE_HEADER,
+	*PTR_MPI2_CONFIG_EXTENDED_PAGE_HEADER,
+	Mpi2ConfigExtendedPageHeader_t,
+	*pMpi2ConfigExtendedPageHeader_t;
+
+typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION {
+	MPI2_CONFIG_PAGE_HEADER          Struct;
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER Ext;
+	U8                               Bytes[8];
+	U16                              Word16[4];
+	U32                              Word32[2];
+} MPI2_CONFIG_EXT_PAGE_HEADER_UNION,
+	*PTR_MPI2_CONFIG_EXT_PAGE_HEADER_UNION,
+	Mpi2ConfigPageExtendedHeaderUnion,
+	*pMpi2ConfigPageExtendedHeaderUnion;
+
+
+/*PageType field values */
+#define MPI2_CONFIG_PAGEATTR_READ_ONLY              (0x00)
+#define MPI2_CONFIG_PAGEATTR_CHANGEABLE             (0x10)
+#define MPI2_CONFIG_PAGEATTR_PERSISTENT             (0x20)
+#define MPI2_CONFIG_PAGEATTR_MASK                   (0xF0)
+
+#define MPI2_CONFIG_PAGETYPE_IO_UNIT                (0x00)
+#define MPI2_CONFIG_PAGETYPE_IOC                    (0x01)
+#define MPI2_CONFIG_PAGETYPE_BIOS                   (0x02)
+#define MPI2_CONFIG_PAGETYPE_RAID_VOLUME            (0x08)
+#define MPI2_CONFIG_PAGETYPE_MANUFACTURING          (0x09)
+#define MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK          (0x0A)
+#define MPI2_CONFIG_PAGETYPE_EXTENDED               (0x0F)
+#define MPI2_CONFIG_PAGETYPE_MASK                   (0x0F)
+
+#define MPI2_CONFIG_TYPENUM_MASK                    (0x0FFF)
+
+
+/*ExtPageType field values */
+#define MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT         (0x10)
+#define MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER        (0x11)
+#define MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE          (0x12)
+#define MPI2_CONFIG_EXTPAGETYPE_SAS_PHY             (0x13)
+#define MPI2_CONFIG_EXTPAGETYPE_LOG                 (0x14)
+#define MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE           (0x15)
+#define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG         (0x16)
+#define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING      (0x17)
+#define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT            (0x18)
+#define MPI2_CONFIG_EXTPAGETYPE_ETHERNET            (0x19)
+#define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING   (0x1A)
+#define MPI2_CONFIG_EXTPAGETYPE_PCIE_IO_UNIT        (0x1B)
+#define MPI2_CONFIG_EXTPAGETYPE_PCIE_SWITCH         (0x1C)
+#define MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE         (0x1D)
+#define MPI2_CONFIG_EXTPAGETYPE_PCIE_LINK           (0x1E)
+
+
+/*****************************************************************************
+*  PageAddress defines
+*****************************************************************************/
+
+/*RAID Volume PageAddress format */
+#define MPI2_RAID_VOLUME_PGAD_FORM_MASK             (0xF0000000)
+#define MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE  (0x00000000)
+#define MPI2_RAID_VOLUME_PGAD_FORM_HANDLE           (0x10000000)
+
+#define MPI2_RAID_VOLUME_PGAD_HANDLE_MASK           (0x0000FFFF)
+
+
+/*RAID Physical Disk PageAddress format */
+#define MPI2_PHYSDISK_PGAD_FORM_MASK                    (0xF0000000)
+#define MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM    (0x00000000)
+#define MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM             (0x10000000)
+#define MPI2_PHYSDISK_PGAD_FORM_DEVHANDLE               (0x20000000)
+
+#define MPI2_PHYSDISK_PGAD_PHYSDISKNUM_MASK             (0x000000FF)
+#define MPI2_PHYSDISK_PGAD_DEVHANDLE_MASK               (0x0000FFFF)
+
+
+/*SAS Expander PageAddress format */
+#define MPI2_SAS_EXPAND_PGAD_FORM_MASK              (0xF0000000)
+#define MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL     (0x00000000)
+#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM      (0x10000000)
+#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL              (0x20000000)
+
+#define MPI2_SAS_EXPAND_PGAD_HANDLE_MASK            (0x0000FFFF)
+#define MPI2_SAS_EXPAND_PGAD_PHYNUM_MASK            (0x00FF0000)
+#define MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT           (16)
+
+
+/*SAS Device PageAddress format */
+#define MPI2_SAS_DEVICE_PGAD_FORM_MASK              (0xF0000000)
+#define MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE   (0x00000000)
+#define MPI2_SAS_DEVICE_PGAD_FORM_HANDLE            (0x20000000)
+
+#define MPI2_SAS_DEVICE_PGAD_HANDLE_MASK            (0x0000FFFF)
+
+
+/*SAS PHY PageAddress format */
+#define MPI2_SAS_PHY_PGAD_FORM_MASK                 (0xF0000000)
+#define MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER           (0x00000000)
+#define MPI2_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX        (0x10000000)
+
+#define MPI2_SAS_PHY_PGAD_PHY_NUMBER_MASK           (0x000000FF)
+#define MPI2_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK        (0x0000FFFF)
+
+
+/*SAS Port PageAddress format */
+#define MPI2_SASPORT_PGAD_FORM_MASK                 (0xF0000000)
+#define MPI2_SASPORT_PGAD_FORM_GET_NEXT_PORT        (0x00000000)
+#define MPI2_SASPORT_PGAD_FORM_PORT_NUM             (0x10000000)
+
+#define MPI2_SASPORT_PGAD_PORTNUMBER_MASK           (0x00000FFF)
+
+
+/*SAS Enclosure PageAddress format */
+#define MPI2_SAS_ENCLOS_PGAD_FORM_MASK              (0xF0000000)
+#define MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE   (0x00000000)
+#define MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE            (0x10000000)
+
+#define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK            (0x0000FFFF)
+
+/*Enclosure PageAddress format */
+#define MPI26_ENCLOS_PGAD_FORM_MASK                 (0xF0000000)
+#define MPI26_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE      (0x00000000)
+#define MPI26_ENCLOS_PGAD_FORM_HANDLE               (0x10000000)
+
+#define MPI26_ENCLOS_PGAD_HANDLE_MASK               (0x0000FFFF)
+
+/*RAID Configuration PageAddress format */
+#define MPI2_RAID_PGAD_FORM_MASK                    (0xF0000000)
+#define MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM      (0x00000000)
+#define MPI2_RAID_PGAD_FORM_CONFIGNUM               (0x10000000)
+#define MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG           (0x20000000)
+
+#define MPI2_RAID_PGAD_CONFIGNUM_MASK               (0x000000FF)
+
+
+/*Driver Persistent Mapping PageAddress format */
+#define MPI2_DPM_PGAD_FORM_MASK                     (0xF0000000)
+#define MPI2_DPM_PGAD_FORM_ENTRY_RANGE              (0x00000000)
+
+#define MPI2_DPM_PGAD_ENTRY_COUNT_MASK              (0x0FFF0000)
+#define MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT             (16)
+#define MPI2_DPM_PGAD_START_ENTRY_MASK              (0x0000FFFF)
+
+
+/*Ethernet PageAddress format */
+#define MPI2_ETHERNET_PGAD_FORM_MASK                (0xF0000000)
+#define MPI2_ETHERNET_PGAD_FORM_IF_NUM              (0x00000000)
+
+#define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK           (0x000000FF)
+
+
+/*PCIe Switch PageAddress format */
+#define MPI26_PCIE_SWITCH_PGAD_FORM_MASK            (0xF0000000)
+#define MPI26_PCIE_SWITCH_PGAD_FORM_GET_NEXT_HNDL   (0x00000000)
+#define MPI26_PCIE_SWITCH_PGAD_FORM_HNDL_PORTNUM    (0x10000000)
+#define MPI26_PCIE_SWITCH_EXPAND_PGAD_FORM_HNDL     (0x20000000)
+
+#define MPI26_PCIE_SWITCH_PGAD_HANDLE_MASK          (0x0000FFFF)
+#define MPI26_PCIE_SWITCH_PGAD_PORTNUM_MASK         (0x00FF0000)
+#define MPI26_PCIE_SWITCH_PGAD_PORTNUM_SHIFT        (16)
+
+
+/*PCIe Device PageAddress format */
+#define MPI26_PCIE_DEVICE_PGAD_FORM_MASK            (0xF0000000)
+#define MPI26_PCIE_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
+#define MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE          (0x20000000)
+
+#define MPI26_PCIE_DEVICE_PGAD_HANDLE_MASK          (0x0000FFFF)
+
+/*PCIe Link PageAddress format */
+#define MPI26_PCIE_LINK_PGAD_FORM_MASK            (0xF0000000)
+#define MPI26_PCIE_LINK_PGAD_FORM_GET_NEXT_LINK   (0x00000000)
+#define MPI26_PCIE_LINK_PGAD_FORM_LINK_NUM        (0x10000000)
+
+#define MPI26_PCIE_DEVICE_PGAD_LINKNUM_MASK       (0x000000FF)
+
+
+
+/****************************************************************************
+*  Configuration messages
+****************************************************************************/
+
+/*Configuration Request Message */
+typedef struct _MPI2_CONFIG_REQUEST {
+	U8                      Action;                     /*0x00 */
+	U8                      SGLFlags;                   /*0x01 */
+	U8                      ChainOffset;                /*0x02 */
+	U8                      Function;                   /*0x03 */
+	U16                     ExtPageLength;              /*0x04 */
+	U8                      ExtPageType;                /*0x06 */
+	U8                      MsgFlags;                   /*0x07 */
+	U8                      VP_ID;                      /*0x08 */
+	U8                      VF_ID;                      /*0x09 */
+	U16                     Reserved1;                  /*0x0A */
+	U8                      Reserved2;                  /*0x0C */
+	U8                      ProxyVF_ID;                 /*0x0D */
+	U16                     Reserved4;                  /*0x0E */
+	U32                     Reserved3;                  /*0x10 */
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x14 */
+	U32                     PageAddress;                /*0x18 */
+	MPI2_SGE_IO_UNION       PageBufferSGE;              /*0x1C */
+} MPI2_CONFIG_REQUEST, *PTR_MPI2_CONFIG_REQUEST,
+	Mpi2ConfigRequest_t, *pMpi2ConfigRequest_t;
+
+/*values for the Action field */
+#define MPI2_CONFIG_ACTION_PAGE_HEADER              (0x00)
+#define MPI2_CONFIG_ACTION_PAGE_READ_CURRENT        (0x01)
+#define MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT       (0x02)
+#define MPI2_CONFIG_ACTION_PAGE_DEFAULT             (0x03)
+#define MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM         (0x04)
+#define MPI2_CONFIG_ACTION_PAGE_READ_DEFAULT        (0x05)
+#define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM          (0x06)
+#define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE      (0x07)
+
+/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
+
+
+/*Config Reply Message */
+typedef struct _MPI2_CONFIG_REPLY {
+	U8                      Action;                     /*0x00 */
+	U8                      SGLFlags;                   /*0x01 */
+	U8                      MsgLength;                  /*0x02 */
+	U8                      Function;                   /*0x03 */
+	U16                     ExtPageLength;              /*0x04 */
+	U8                      ExtPageType;                /*0x06 */
+	U8                      MsgFlags;                   /*0x07 */
+	U8                      VP_ID;                      /*0x08 */
+	U8                      VF_ID;                      /*0x09 */
+	U16                     Reserved1;                  /*0x0A */
+	U16                     Reserved2;                  /*0x0C */
+	U16                     IOCStatus;                  /*0x0E */
+	U32                     IOCLogInfo;                 /*0x10 */
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x14 */
+} MPI2_CONFIG_REPLY, *PTR_MPI2_CONFIG_REPLY,
+	Mpi2ConfigReply_t, *pMpi2ConfigReply_t;
+
+
+
+/*****************************************************************************
+*
+*              C o n f i g u r a t i o n    P a g e s
+*
+*****************************************************************************/
+
+/****************************************************************************
+*  Manufacturing Config pages
+****************************************************************************/
+
+#define MPI2_MFGPAGE_VENDORID_LSI                   (0x1000)
+#define MPI2_MFGPAGE_VENDORID_ATTO                  (0x117C)
+
+/*MPI v2.0 SAS products */
+#define MPI2_MFGPAGE_DEVID_SAS2004                  (0x0070)
+#define MPI2_MFGPAGE_DEVID_SAS2008                  (0x0072)
+#define MPI2_MFGPAGE_DEVID_SAS2108_1                (0x0074)
+#define MPI2_MFGPAGE_DEVID_SAS2108_2                (0x0076)
+#define MPI2_MFGPAGE_DEVID_SAS2108_3                (0x0077)
+#define MPI2_MFGPAGE_DEVID_SAS2116_1                (0x0064)
+#define MPI2_MFGPAGE_DEVID_SAS2116_2                (0x0065)
+
+#define MPI2_MFGPAGE_DEVID_SSS6200                  (0x007E)
+
+#define MPI2_MFGPAGE_DEVID_SAS2208_1                (0x0080)
+#define MPI2_MFGPAGE_DEVID_SAS2208_2                (0x0081)
+#define MPI2_MFGPAGE_DEVID_SAS2208_3                (0x0082)
+#define MPI2_MFGPAGE_DEVID_SAS2208_4                (0x0083)
+#define MPI2_MFGPAGE_DEVID_SAS2208_5                (0x0084)
+#define MPI2_MFGPAGE_DEVID_SAS2208_6                (0x0085)
+#define MPI2_MFGPAGE_DEVID_SAS2308_1                (0x0086)
+#define MPI2_MFGPAGE_DEVID_SAS2308_2                (0x0087)
+#define MPI2_MFGPAGE_DEVID_SAS2308_3                (0x006E)
+#define MPI2_MFGPAGE_DEVID_SWITCH_MPI_EP            (0x02B0)
+#define MPI2_MFGPAGE_DEVID_SWITCH_MPI_EP_1          (0x02B1)
+
+/*MPI v2.5 SAS products */
+#define MPI25_MFGPAGE_DEVID_SAS3004                 (0x0096)
+#define MPI25_MFGPAGE_DEVID_SAS3008                 (0x0097)
+#define MPI25_MFGPAGE_DEVID_SAS3108_1               (0x0090)
+#define MPI25_MFGPAGE_DEVID_SAS3108_2               (0x0091)
+#define MPI25_MFGPAGE_DEVID_SAS3108_5               (0x0094)
+#define MPI25_MFGPAGE_DEVID_SAS3108_6               (0x0095)
+
+/* MPI v2.6 SAS Products */
+#define MPI26_MFGPAGE_DEVID_SAS3216                 (0x00C9)
+#define MPI26_MFGPAGE_DEVID_SAS3224                 (0x00C4)
+#define MPI26_MFGPAGE_DEVID_SAS3316_1               (0x00C5)
+#define MPI26_MFGPAGE_DEVID_SAS3316_2               (0x00C6)
+#define MPI26_MFGPAGE_DEVID_SAS3316_3               (0x00C7)
+#define MPI26_MFGPAGE_DEVID_SAS3316_4               (0x00C8)
+#define MPI26_MFGPAGE_DEVID_SAS3324_1               (0x00C0)
+#define MPI26_MFGPAGE_DEVID_SAS3324_2               (0x00C1)
+#define MPI26_MFGPAGE_DEVID_SAS3324_3               (0x00C2)
+#define MPI26_MFGPAGE_DEVID_SAS3324_4               (0x00C3)
+
+#define MPI26_MFGPAGE_DEVID_SAS3516                 (0x00AA)
+#define MPI26_MFGPAGE_DEVID_SAS3516_1               (0x00AB)
+#define MPI26_MFGPAGE_DEVID_SAS3416                 (0x00AC)
+#define MPI26_MFGPAGE_DEVID_SAS3508                 (0x00AD)
+#define MPI26_MFGPAGE_DEVID_SAS3508_1               (0x00AE)
+#define MPI26_MFGPAGE_DEVID_SAS3408                 (0x00AF)
+#define MPI26_MFGPAGE_DEVID_SAS3716                 (0x00D0)
+#define MPI26_MFGPAGE_DEVID_SAS3616                 (0x00D1)
+#define MPI26_MFGPAGE_DEVID_SAS3708                 (0x00D2)
+
+#define MPI26_MFGPAGE_DEVID_SEC_MASK_3916           (0x0003)
+#define MPI26_MFGPAGE_DEVID_INVALID0_3916           (0x00E0)
+#define MPI26_MFGPAGE_DEVID_CFG_SEC_3916            (0x00E1)
+#define MPI26_MFGPAGE_DEVID_HARD_SEC_3916           (0x00E2)
+#define MPI26_MFGPAGE_DEVID_INVALID1_3916           (0x00E3)
+
+#define MPI26_MFGPAGE_DEVID_SEC_MASK_3816           (0x0003)
+#define MPI26_MFGPAGE_DEVID_INVALID0_3816           (0x00E4)
+#define MPI26_MFGPAGE_DEVID_CFG_SEC_3816            (0x00E5)
+#define MPI26_MFGPAGE_DEVID_HARD_SEC_3816           (0x00E6)
+#define MPI26_MFGPAGE_DEVID_INVALID1_3816           (0x00E7)
+
+
+/*Manufacturing Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_0 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	U8                      ChipName[16];               /*0x04 */
+	U8                      ChipRevision[8];            /*0x14 */
+	U8                      BoardName[16];              /*0x1C */
+	U8                      BoardAssembly[16];          /*0x2C */
+	U8                      BoardTracerNumber[16];      /*0x3C */
+} MPI2_CONFIG_PAGE_MAN_0,
+	*PTR_MPI2_CONFIG_PAGE_MAN_0,
+	Mpi2ManufacturingPage0_t,
+	*pMpi2ManufacturingPage0_t;
+
+#define MPI2_MANUFACTURING0_PAGEVERSION                (0x00)
+
+
+/*Manufacturing Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_1 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	U8                      VPD[256];                   /*0x04 */
+} MPI2_CONFIG_PAGE_MAN_1,
+	*PTR_MPI2_CONFIG_PAGE_MAN_1,
+	Mpi2ManufacturingPage1_t,
+	*pMpi2ManufacturingPage1_t;
+
+#define MPI2_MANUFACTURING1_PAGEVERSION                (0x00)
+
+
+typedef struct _MPI2_CHIP_REVISION_ID {
+	U16 DeviceID;                                       /*0x00 */
+	U8  PCIRevisionID;                                  /*0x02 */
+	U8  Reserved;                                       /*0x03 */
+} MPI2_CHIP_REVISION_ID, *PTR_MPI2_CHIP_REVISION_ID,
+	Mpi2ChipRevisionId_t, *pMpi2ChipRevisionId_t;
+
+
+/*Manufacturing Page 2 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check Header.PageLength at runtime.
+ */
+#ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS
+#define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS   (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_2 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	MPI2_CHIP_REVISION_ID   ChipId;                     /*0x04 */
+	U32
+		HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/*0x08 */
+} MPI2_CONFIG_PAGE_MAN_2,
+	*PTR_MPI2_CONFIG_PAGE_MAN_2,
+	Mpi2ManufacturingPage2_t,
+	*pMpi2ManufacturingPage2_t;
+
+#define MPI2_MANUFACTURING2_PAGEVERSION                 (0x00)
+
+
+/*Manufacturing Page 3 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check Header.PageLength at runtime.
+ */
+#ifndef MPI2_MAN_PAGE_3_INFO_WORDS
+#define MPI2_MAN_PAGE_3_INFO_WORDS          (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_3 {
+	MPI2_CONFIG_PAGE_HEADER             Header;         /*0x00 */
+	MPI2_CHIP_REVISION_ID               ChipId;         /*0x04 */
+	U32
+		Info[MPI2_MAN_PAGE_3_INFO_WORDS];/*0x08 */
+} MPI2_CONFIG_PAGE_MAN_3,
+	*PTR_MPI2_CONFIG_PAGE_MAN_3,
+	Mpi2ManufacturingPage3_t,
+	*pMpi2ManufacturingPage3_t;
+
+#define MPI2_MANUFACTURING3_PAGEVERSION                 (0x00)
+
+
+/*Manufacturing Page 4 */
+
+typedef struct _MPI2_MANPAGE4_PWR_SAVE_SETTINGS {
+	U8                          PowerSaveFlags;                 /*0x00 */
+	U8                          InternalOperationsSleepTime;    /*0x01 */
+	U8                          InternalOperationsRunTime;      /*0x02 */
+	U8                          HostIdleTime;                   /*0x03 */
+} MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
+	*PTR_MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
+	Mpi2ManPage4PwrSaveSettings_t,
+	*pMpi2ManPage4PwrSaveSettings_t;
+
+/*defines for the PowerSaveFlags field */
+#define MPI2_MANPAGE4_MASK_POWERSAVE_MODE               (0x03)
+#define MPI2_MANPAGE4_POWERSAVE_MODE_DISABLED           (0x00)
+#define MPI2_MANPAGE4_CUSTOM_POWERSAVE_MODE             (0x01)
+#define MPI2_MANPAGE4_FULL_POWERSAVE_MODE               (0x02)
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_4 {
+	MPI2_CONFIG_PAGE_HEADER             Header;                 /*0x00 */
+	U32                                 Reserved1;              /*0x04 */
+	U32                                 Flags;                  /*0x08 */
+	U8                                  InquirySize;            /*0x0C */
+	U8                                  Reserved2;              /*0x0D */
+	U16                                 Reserved3;              /*0x0E */
+	U8                                  InquiryData[56];        /*0x10 */
+	U32                                 RAID0VolumeSettings;    /*0x48 */
+	U32                                 RAID1EVolumeSettings;   /*0x4C */
+	U32                                 RAID1VolumeSettings;    /*0x50 */
+	U32                                 RAID10VolumeSettings;   /*0x54 */
+	U32                                 Reserved4;              /*0x58 */
+	U32                                 Reserved5;              /*0x5C */
+	MPI2_MANPAGE4_PWR_SAVE_SETTINGS     PowerSaveSettings;      /*0x60 */
+	U8                                  MaxOCEDisks;            /*0x64 */
+	U8                                  ResyncRate;             /*0x65 */
+	U16                                 DataScrubDuration;      /*0x66 */
+	U8                                  MaxHotSpares;           /*0x68 */
+	U8                                  MaxPhysDisksPerVol;     /*0x69 */
+	U8                                  MaxPhysDisks;           /*0x6A */
+	U8                                  MaxVolumes;             /*0x6B */
+} MPI2_CONFIG_PAGE_MAN_4,
+	*PTR_MPI2_CONFIG_PAGE_MAN_4,
+	Mpi2ManufacturingPage4_t,
+	*pMpi2ManufacturingPage4_t;
+
+#define MPI2_MANUFACTURING4_PAGEVERSION                 (0x0A)
+
+/*Manufacturing Page 4 Flags field */
+#define MPI2_MANPAGE4_METADATA_SIZE_MASK                (0x00030000)
+#define MPI2_MANPAGE4_METADATA_512MB                    (0x00000000)
+
+#define MPI2_MANPAGE4_MIX_SSD_SAS_SATA                  (0x00008000)
+#define MPI2_MANPAGE4_MIX_SSD_AND_NON_SSD               (0x00004000)
+#define MPI2_MANPAGE4_HIDE_PHYSDISK_NON_IR              (0x00002000)
+
+#define MPI2_MANPAGE4_MASK_PHYSDISK_COERCION            (0x00001C00)
+#define MPI2_MANPAGE4_PHYSDISK_COERCION_1GB             (0x00000000)
+#define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION           (0x00000400)
+#define MPI2_MANPAGE4_PHYSDISK_ADAPTIVE_COERCION        (0x00000800)
+#define MPI2_MANPAGE4_PHYSDISK_ZERO_COERCION            (0x00000C00)
+
+#define MPI2_MANPAGE4_MASK_BAD_BLOCK_MARKING            (0x00000300)
+#define MPI2_MANPAGE4_DEFAULT_BAD_BLOCK_MARKING         (0x00000000)
+#define MPI2_MANPAGE4_TABLE_BAD_BLOCK_MARKING           (0x00000100)
+#define MPI2_MANPAGE4_WRITE_LONG_BAD_BLOCK_MARKING      (0x00000200)
+
+#define MPI2_MANPAGE4_FORCE_OFFLINE_FAILOVER            (0x00000080)
+#define MPI2_MANPAGE4_RAID10_DISABLE                    (0x00000040)
+#define MPI2_MANPAGE4_RAID1E_DISABLE                    (0x00000020)
+#define MPI2_MANPAGE4_RAID1_DISABLE                     (0x00000010)
+#define MPI2_MANPAGE4_RAID0_DISABLE                     (0x00000008)
+#define MPI2_MANPAGE4_IR_MODEPAGE8_DISABLE              (0x00000004)
+#define MPI2_MANPAGE4_IM_RESYNC_CACHE_ENABLE            (0x00000002)
+#define MPI2_MANPAGE4_IR_NO_MIX_SAS_SATA                (0x00000001)
+
+
+/*Manufacturing Page 5 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES
+#define MPI2_MAN_PAGE_5_PHY_ENTRIES         (1)
+#endif
+
+typedef struct _MPI2_MANUFACTURING5_ENTRY {
+	U64                                 WWID;           /*0x00 */
+	U64                                 DeviceName;     /*0x08 */
+} MPI2_MANUFACTURING5_ENTRY,
+	*PTR_MPI2_MANUFACTURING5_ENTRY,
+	Mpi2Manufacturing5Entry_t,
+	*pMpi2Manufacturing5Entry_t;
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_5 {
+	MPI2_CONFIG_PAGE_HEADER             Header;         /*0x00 */
+	U8                                  NumPhys;        /*0x04 */
+	U8                                  Reserved1;      /*0x05 */
+	U16                                 Reserved2;      /*0x06 */
+	U32                                 Reserved3;      /*0x08 */
+	U32                                 Reserved4;      /*0x0C */
+	MPI2_MANUFACTURING5_ENTRY
+		Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/*0x08 */
+} MPI2_CONFIG_PAGE_MAN_5,
+	*PTR_MPI2_CONFIG_PAGE_MAN_5,
+	Mpi2ManufacturingPage5_t,
+	*pMpi2ManufacturingPage5_t;
+
+#define MPI2_MANUFACTURING5_PAGEVERSION                 (0x03)
+
+
+/*Manufacturing Page 6 */
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_6 {
+	MPI2_CONFIG_PAGE_HEADER         Header;             /*0x00 */
+	U32                             ProductSpecificInfo;/*0x04 */
+} MPI2_CONFIG_PAGE_MAN_6,
+	*PTR_MPI2_CONFIG_PAGE_MAN_6,
+	Mpi2ManufacturingPage6_t,
+	*pMpi2ManufacturingPage6_t;
+
+#define MPI2_MANUFACTURING6_PAGEVERSION                 (0x00)
+
+
+/*Manufacturing Page 7 */
+
+typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO {
+	U32                         Pinout;                 /*0x00 */
+	U8                          Connector[16];          /*0x04 */
+	U8                          Location;               /*0x14 */
+	U8                          ReceptacleID;           /*0x15 */
+	U16                         Slot;                   /*0x16 */
+	U16                         Slotx2;                 /*0x18 */
+	U16                         Slotx4;                 /*0x1A */
+} MPI2_MANPAGE7_CONNECTOR_INFO,
+	*PTR_MPI2_MANPAGE7_CONNECTOR_INFO,
+	Mpi2ManPage7ConnectorInfo_t,
+	*pMpi2ManPage7ConnectorInfo_t;
+
+/*defines for the Pinout field */
+#define MPI2_MANPAGE7_PINOUT_LANE_MASK                  (0x0000FF00)
+#define MPI2_MANPAGE7_PINOUT_LANE_SHIFT                 (8)
+
+#define MPI2_MANPAGE7_PINOUT_TYPE_MASK                  (0x000000FF)
+#define MPI2_MANPAGE7_PINOUT_TYPE_UNKNOWN               (0x00)
+#define MPI2_MANPAGE7_PINOUT_SATA_SINGLE                (0x01)
+#define MPI2_MANPAGE7_PINOUT_SFF_8482                   (0x02)
+#define MPI2_MANPAGE7_PINOUT_SFF_8486                   (0x03)
+#define MPI2_MANPAGE7_PINOUT_SFF_8484                   (0x04)
+#define MPI2_MANPAGE7_PINOUT_SFF_8087                   (0x05)
+#define MPI2_MANPAGE7_PINOUT_SFF_8643_4I                (0x06)
+#define MPI2_MANPAGE7_PINOUT_SFF_8643_8I                (0x07)
+#define MPI2_MANPAGE7_PINOUT_SFF_8470                   (0x08)
+#define MPI2_MANPAGE7_PINOUT_SFF_8088                   (0x09)
+#define MPI2_MANPAGE7_PINOUT_SFF_8644_4X                (0x0A)
+#define MPI2_MANPAGE7_PINOUT_SFF_8644_8X                (0x0B)
+#define MPI2_MANPAGE7_PINOUT_SFF_8644_16X               (0x0C)
+#define MPI2_MANPAGE7_PINOUT_SFF_8436                   (0x0D)
+#define MPI2_MANPAGE7_PINOUT_SFF_8088_A                 (0x0E)
+#define MPI2_MANPAGE7_PINOUT_SFF_8643_16i               (0x0F)
+#define MPI2_MANPAGE7_PINOUT_SFF_8654_4i                (0x10)
+#define MPI2_MANPAGE7_PINOUT_SFF_8654_8i                (0x11)
+#define MPI2_MANPAGE7_PINOUT_SFF_8611_4i                (0x12)
+#define MPI2_MANPAGE7_PINOUT_SFF_8611_8i                (0x13)
+
+/*defines for the Location field */
+#define MPI2_MANPAGE7_LOCATION_UNKNOWN                  (0x01)
+#define MPI2_MANPAGE7_LOCATION_INTERNAL                 (0x02)
+#define MPI2_MANPAGE7_LOCATION_EXTERNAL                 (0x04)
+#define MPI2_MANPAGE7_LOCATION_SWITCHABLE               (0x08)
+#define MPI2_MANPAGE7_LOCATION_AUTO                     (0x10)
+#define MPI2_MANPAGE7_LOCATION_NOT_PRESENT              (0x20)
+#define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED            (0x80)
+
+/*defines for the Slot field */
+#define MPI2_MANPAGE7_SLOT_UNKNOWN                      (0xFFFF)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX
+#define MPI2_MANPAGE7_CONNECTOR_INFO_MAX  (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_7 {
+	MPI2_CONFIG_PAGE_HEADER         Header;             /*0x00 */
+	U32                             Reserved1;          /*0x04 */
+	U32                             Reserved2;          /*0x08 */
+	U32                             Flags;              /*0x0C */
+	U8                              EnclosureName[16];  /*0x10 */
+	U8                              NumPhys;            /*0x20 */
+	U8                              Reserved3;          /*0x21 */
+	U16                             Reserved4;          /*0x22 */
+	MPI2_MANPAGE7_CONNECTOR_INFO
+	ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /*0x24 */
+} MPI2_CONFIG_PAGE_MAN_7,
+	*PTR_MPI2_CONFIG_PAGE_MAN_7,
+	Mpi2ManufacturingPage7_t,
+	*pMpi2ManufacturingPage7_t;
+
+#define MPI2_MANUFACTURING7_PAGEVERSION                 (0x01)
+
+/*defines for the Flags field */
+#define MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL         (0x00000008)
+#define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER       (0x00000002)
+#define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO                (0x00000001)
+
+#define MPI26_MANPAGE7_FLAG_CONN_LANE_USE_PINOUT        (0x00000020)
+#define MPI26_MANPAGE7_FLAG_X2_X4_SLOT_INFO_VALID       (0x00000010)
+
+/*
+ *Generic structure to use for product-specific manufacturing pages
+ *(currently Manufacturing Page 8 through Manufacturing Page 31).
+ */
+
+typedef struct _MPI2_CONFIG_PAGE_MAN_PS {
+	MPI2_CONFIG_PAGE_HEADER         Header;             /*0x00 */
+	U32                             ProductSpecificInfo;/*0x04 */
+} MPI2_CONFIG_PAGE_MAN_PS,
+	*PTR_MPI2_CONFIG_PAGE_MAN_PS,
+	Mpi2ManufacturingPagePS_t,
+	*pMpi2ManufacturingPagePS_t;
+
+#define MPI2_MANUFACTURING8_PAGEVERSION                 (0x00)
+#define MPI2_MANUFACTURING9_PAGEVERSION                 (0x00)
+#define MPI2_MANUFACTURING10_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING11_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING12_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING13_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING14_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING15_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING16_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING17_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING18_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING19_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING20_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING21_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING22_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING23_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING24_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING25_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING26_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING27_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING28_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING29_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING30_PAGEVERSION                (0x00)
+#define MPI2_MANUFACTURING31_PAGEVERSION                (0x00)
+
+
+/****************************************************************************
+*  IO Unit Config Pages
+****************************************************************************/
+
+/*IO Unit Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_0 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	U64                     UniqueValue;                /*0x04 */
+	MPI2_VERSION_UNION      NvdataVersionDefault;       /*0x08 */
+	MPI2_VERSION_UNION      NvdataVersionPersistent;    /*0x0A */
+} MPI2_CONFIG_PAGE_IO_UNIT_0,
+	*PTR_MPI2_CONFIG_PAGE_IO_UNIT_0,
+	Mpi2IOUnitPage0_t, *pMpi2IOUnitPage0_t;
+
+#define MPI2_IOUNITPAGE0_PAGEVERSION                    (0x02)
+
+
+/*IO Unit Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	U32                     Flags;                      /*0x04 */
+} MPI2_CONFIG_PAGE_IO_UNIT_1,
+	*PTR_MPI2_CONFIG_PAGE_IO_UNIT_1,
+	Mpi2IOUnitPage1_t, *pMpi2IOUnitPage1_t;
+
+#define MPI2_IOUNITPAGE1_PAGEVERSION                    (0x04)
+
+/* IO Unit Page 1 Flags defines */
+#define MPI26_IOUNITPAGE1_NVME_WRCACHE_MASK             (0x00030000)
+#define MPI26_IOUNITPAGE1_NVME_WRCACHE_SHIFT            (16)
+#define MPI26_IOUNITPAGE1_NVME_WRCACHE_NO_CHANGE        (0x00000000)
+#define MPI26_IOUNITPAGE1_NVME_WRCACHE_ENABLE           (0x00010000)
+#define MPI26_IOUNITPAGE1_NVME_WRCACHE_DISABLE          (0x00020000)
+#define MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK       (0x00004000)
+#define MPI25_IOUNITPAGE1_NEW_DEVICE_FAST_PATH_DISABLE  (0x00002000)
+#define MPI25_IOUNITPAGE1_DISABLE_FAST_PATH             (0x00001000)
+#define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY    (0x00000800)
+#define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE          (0x00000600)
+#define MPI2_IOUNITPAGE1_SATA_WRITE_CACHE_SHIFT         (9)
+#define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE        (0x00000000)
+#define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE       (0x00000200)
+#define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE     (0x00000400)
+#define MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE       (0x00000100)
+#define MPI2_IOUNITPAGE1_DISABLE_IR                     (0x00000040)
+#define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020)
+#define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID        (0x00000004)
+
+
+/*IO Unit Page 3 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for GPIOCount at runtime.
+ */
+#ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX
+#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX    (36)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 {
+	MPI2_CONFIG_PAGE_HEADER Header;			 /*0x00 */
+	U8                      GPIOCount;		 /*0x04 */
+	U8                      Reserved1;		 /*0x05 */
+	U16                     Reserved2;		 /*0x06 */
+	U16
+		GPIOVal[MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX];/*0x08 */
+} MPI2_CONFIG_PAGE_IO_UNIT_3,
+	*PTR_MPI2_CONFIG_PAGE_IO_UNIT_3,
+	Mpi2IOUnitPage3_t, *pMpi2IOUnitPage3_t;
+
+#define MPI2_IOUNITPAGE3_PAGEVERSION                    (0x01)
+
+/*defines for IO Unit Page 3 GPIOVal field */
+#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_MASK             (0xFFFC)
+#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_SHIFT            (2)
+#define MPI2_IOUNITPAGE3_GPIO_SETTING_OFF               (0x0000)
+#define MPI2_IOUNITPAGE3_GPIO_SETTING_ON                (0x0001)
+
+
+/*IO Unit Page 5 */
+
+/*
+ *Upper layer code (drivers, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumDmaEngines at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES
+#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES      (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	U64
+		RaidAcceleratorBufferBaseAddress;           /*0x04 */
+	U64
+		RaidAcceleratorBufferSize;                  /*0x0C */
+	U64
+		RaidAcceleratorControlBaseAddress;          /*0x14 */
+	U8                      RAControlSize;              /*0x1C */
+	U8                      NumDmaEngines;              /*0x1D */
+	U8                      RAMinControlSize;           /*0x1E */
+	U8                      RAMaxControlSize;           /*0x1F */
+	U32                     Reserved1;                  /*0x20 */
+	U32                     Reserved2;                  /*0x24 */
+	U32                     Reserved3;                  /*0x28 */
+	U32
+	DmaEngineCapabilities[MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /*0x2C */
+} MPI2_CONFIG_PAGE_IO_UNIT_5,
+	*PTR_MPI2_CONFIG_PAGE_IO_UNIT_5,
+	Mpi2IOUnitPage5_t, *pMpi2IOUnitPage5_t;
+
+#define MPI2_IOUNITPAGE5_PAGEVERSION                    (0x00)
+
+/*defines for IO Unit Page 5 DmaEngineCapabilities field */
+#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS      (0xFFFF0000)
+#define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS     (16)
+
+#define MPI2_IOUNITPAGE5_DMA_CAP_EEDP                   (0x0008)
+#define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION      (0x0004)
+#define MPI2_IOUNITPAGE5_DMA_CAP_HASHING                (0x0002)
+#define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION             (0x0001)
+
+
+/*IO Unit Page 6 */
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 {
+	MPI2_CONFIG_PAGE_HEADER Header;                 /*0x00 */
+	U16                     Flags;                  /*0x04 */
+	U8                      RAHostControlSize;      /*0x06 */
+	U8                      Reserved0;              /*0x07 */
+	U64
+		RaidAcceleratorHostControlBaseAddress;  /*0x08 */
+	U32                     Reserved1;              /*0x10 */
+	U32                     Reserved2;              /*0x14 */
+	U32                     Reserved3;              /*0x18 */
+} MPI2_CONFIG_PAGE_IO_UNIT_6,
+	*PTR_MPI2_CONFIG_PAGE_IO_UNIT_6,
+	Mpi2IOUnitPage6_t, *pMpi2IOUnitPage6_t;
+
+#define MPI2_IOUNITPAGE6_PAGEVERSION                    (0x00)
+
+/*defines for IO Unit Page 6 Flags field */
+#define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR  (0x0001)
+
+
+/*IO Unit Page 7 */
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
+	MPI2_CONFIG_PAGE_HEADER Header;                 /*0x00 */
+	U8                      CurrentPowerMode;       /*0x04 */
+	U8                      PreviousPowerMode;      /*0x05 */
+	U8                      PCIeWidth;              /*0x06 */
+	U8                      PCIeSpeed;              /*0x07 */
+	U32                     ProcessorState;         /*0x08 */
+	U32
+		PowerManagementCapabilities;            /*0x0C */
+	U16                     IOCTemperature;         /*0x10 */
+	U8
+		IOCTemperatureUnits;                    /*0x12 */
+	U8                      IOCSpeed;               /*0x13 */
+	U16                     BoardTemperature;       /*0x14 */
+	U8
+		BoardTemperatureUnits;                  /*0x16 */
+	U8                      Reserved3;              /*0x17 */
+	U32			BoardPowerRequirement;	/*0x18 */
+	U32			PCISlotPowerAllocation;	/*0x1C */
+/* reserved prior to MPI v2.6 */
+	U8		Flags;			/* 0x20 */
+	U8		Reserved6;			/* 0x21 */
+	U16		Reserved7;			/* 0x22 */
+	U32		Reserved8;			/* 0x24 */
+} MPI2_CONFIG_PAGE_IO_UNIT_7,
+	*PTR_MPI2_CONFIG_PAGE_IO_UNIT_7,
+	Mpi2IOUnitPage7_t, *pMpi2IOUnitPage7_t;
+
+#define MPI2_IOUNITPAGE7_PAGEVERSION			(0x05)
+
+/*defines for IO Unit Page 7 CurrentPowerMode and PreviousPowerMode fields */
+#define MPI25_IOUNITPAGE7_PM_INIT_MASK              (0xC0)
+#define MPI25_IOUNITPAGE7_PM_INIT_UNAVAILABLE       (0x00)
+#define MPI25_IOUNITPAGE7_PM_INIT_HOST              (0x40)
+#define MPI25_IOUNITPAGE7_PM_INIT_IO_UNIT           (0x80)
+#define MPI25_IOUNITPAGE7_PM_INIT_PCIE_DPA          (0xC0)
+
+#define MPI25_IOUNITPAGE7_PM_MODE_MASK              (0x07)
+#define MPI25_IOUNITPAGE7_PM_MODE_UNAVAILABLE       (0x00)
+#define MPI25_IOUNITPAGE7_PM_MODE_UNKNOWN           (0x01)
+#define MPI25_IOUNITPAGE7_PM_MODE_FULL_POWER        (0x04)
+#define MPI25_IOUNITPAGE7_PM_MODE_REDUCED_POWER     (0x05)
+#define MPI25_IOUNITPAGE7_PM_MODE_STANDBY           (0x06)
+
+
+/*defines for IO Unit Page 7 PCIeWidth field */
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1              (0x01)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2              (0x02)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4              (0x04)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8              (0x08)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X16             (0x10)
+
+/*defines for IO Unit Page 7 PCIeSpeed field */
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS        (0x00)
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS        (0x01)
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS        (0x02)
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_16_0_GBPS       (0x03)
+
+/*defines for IO Unit Page 7 ProcessorState field */
+#define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND         (0x0000000F)
+#define MPI2_IOUNITPAGE7_PSTATE_SHIFT_SECOND        (0)
+
+#define MPI2_IOUNITPAGE7_PSTATE_NOT_PRESENT         (0x00)
+#define MPI2_IOUNITPAGE7_PSTATE_DISABLED            (0x01)
+#define MPI2_IOUNITPAGE7_PSTATE_ENABLED             (0x02)
+
+/*defines for IO Unit Page 7 PowerManagementCapabilities field */
+#define MPI25_IOUNITPAGE7_PMCAP_DPA_FULL_PWR_MODE       (0x00400000)
+#define MPI25_IOUNITPAGE7_PMCAP_DPA_REDUCED_PWR_MODE    (0x00200000)
+#define MPI25_IOUNITPAGE7_PMCAP_DPA_STANDBY_MODE        (0x00100000)
+#define MPI25_IOUNITPAGE7_PMCAP_HOST_FULL_PWR_MODE      (0x00040000)
+#define MPI25_IOUNITPAGE7_PMCAP_HOST_REDUCED_PWR_MODE   (0x00020000)
+#define MPI25_IOUNITPAGE7_PMCAP_HOST_STANDBY_MODE       (0x00010000)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_FULL_PWR_MODE        (0x00004000)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_REDUCED_PWR_MODE     (0x00002000)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_STANDBY_MODE         (0x00001000)
+#define MPI2_IOUNITPAGE7_PMCAP_HOST_12_5_PCT_IOCSPEED   (0x00000400)
+#define MPI2_IOUNITPAGE7_PMCAP_HOST_25_0_PCT_IOCSPEED   (0x00000200)
+#define MPI2_IOUNITPAGE7_PMCAP_HOST_50_0_PCT_IOCSPEED   (0x00000100)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_12_5_PCT_IOCSPEED    (0x00000040)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_25_0_PCT_IOCSPEED    (0x00000020)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_50_0_PCT_IOCSPEED    (0x00000010)
+#define MPI2_IOUNITPAGE7_PMCAP_HOST_WIDTH_CHANGE_PCIE   (0x00000008)
+#define MPI2_IOUNITPAGE7_PMCAP_HOST_SPEED_CHANGE_PCIE   (0x00000004)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_WIDTH_CHANGE_PCIE    (0x00000002)
+#define MPI25_IOUNITPAGE7_PMCAP_IO_SPEED_CHANGE_PCIE    (0x00000001)
+
+/*obsolete names for the PowerManagementCapabilities bits (above) */
+#define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED    (0x00000400)
+#define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED    (0x00000200)
+#define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED    (0x00000100)
+#define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE    (0x00000008) /*obsolete */
+#define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE    (0x00000004) /*obsolete */
+
+
+/*defines for IO Unit Page 7 IOCTemperatureUnits field */
+#define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT       (0x00)
+#define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT        (0x01)
+#define MPI2_IOUNITPAGE7_IOC_TEMP_CELSIUS           (0x02)
+
+/*defines for IO Unit Page 7 IOCSpeed field */
+#define MPI2_IOUNITPAGE7_IOC_SPEED_FULL             (0x01)
+#define MPI2_IOUNITPAGE7_IOC_SPEED_HALF             (0x02)
+#define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER          (0x04)
+#define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH           (0x08)
+
+/*defines for IO Unit Page 7 BoardTemperatureUnits field */
+#define MPI2_IOUNITPAGE7_BOARD_TEMP_NOT_PRESENT     (0x00)
+#define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT      (0x01)
+#define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS         (0x02)
+
+/* defines for IO Unit Page 7 Flags field */
+#define MPI2_IOUNITPAGE7_FLAG_CABLE_POWER_EXC       (0x01)
+
+/*IO Unit Page 8 */
+
+#define MPI2_IOUNIT8_NUM_THRESHOLDS     (4)
+
+typedef struct _MPI2_IOUNIT8_SENSOR {
+	U16                     Flags;                  /*0x00 */
+	U16                     Reserved1;              /*0x02 */
+	U16
+		Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /*0x04 */
+	U32                     Reserved2;              /*0x0C */
+	U32                     Reserved3;              /*0x10 */
+	U32                     Reserved4;              /*0x14 */
+} MPI2_IOUNIT8_SENSOR, *PTR_MPI2_IOUNIT8_SENSOR,
+	Mpi2IOUnit8Sensor_t, *pMpi2IOUnit8Sensor_t;
+
+/*defines for IO Unit Page 8 Sensor Flags field */
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE         (0x0008)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE         (0x0004)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE         (0x0002)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE         (0x0001)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumSensors at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES
+#define MPI2_IOUNITPAGE8_SENSOR_ENTRIES     (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 {
+	MPI2_CONFIG_PAGE_HEADER Header;                 /*0x00 */
+	U32                     Reserved1;              /*0x04 */
+	U32                     Reserved2;              /*0x08 */
+	U8                      NumSensors;             /*0x0C */
+	U8                      PollingInterval;        /*0x0D */
+	U16                     Reserved3;              /*0x0E */
+	MPI2_IOUNIT8_SENSOR
+		Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/*0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_8,
+	*PTR_MPI2_CONFIG_PAGE_IO_UNIT_8,
+	Mpi2IOUnitPage8_t, *pMpi2IOUnitPage8_t;
+
+#define MPI2_IOUNITPAGE8_PAGEVERSION                    (0x00)
+
+
+/*IO Unit Page 9 */
+
+typedef struct _MPI2_IOUNIT9_SENSOR {
+	U16                     CurrentTemperature;     /*0x00 */
+	U16                     Reserved1;              /*0x02 */
+	U8                      Flags;                  /*0x04 */
+	U8                      Reserved2;              /*0x05 */
+	U16                     Reserved3;              /*0x06 */
+	U32                     Reserved4;              /*0x08 */
+	U32                     Reserved5;              /*0x0C */
+} MPI2_IOUNIT9_SENSOR, *PTR_MPI2_IOUNIT9_SENSOR,
+	Mpi2IOUnit9Sensor_t, *pMpi2IOUnit9Sensor_t;
+
+/*defines for IO Unit Page 9 Sensor Flags field */
+#define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID        (0x01)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumSensors at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES
+#define MPI2_IOUNITPAGE9_SENSOR_ENTRIES     (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 {
+	MPI2_CONFIG_PAGE_HEADER Header;                 /*0x00 */
+	U32                     Reserved1;              /*0x04 */
+	U32                     Reserved2;              /*0x08 */
+	U8                      NumSensors;             /*0x0C */
+	U8                      Reserved4;              /*0x0D */
+	U16                     Reserved3;              /*0x0E */
+	MPI2_IOUNIT9_SENSOR
+		Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/*0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_9,
+	*PTR_MPI2_CONFIG_PAGE_IO_UNIT_9,
+	Mpi2IOUnitPage9_t, *pMpi2IOUnitPage9_t;
+
+#define MPI2_IOUNITPAGE9_PAGEVERSION                    (0x00)
+
+
+/*IO Unit Page 10 */
+
+typedef struct _MPI2_IOUNIT10_FUNCTION {
+	U8                      CreditPercent;      /*0x00 */
+	U8                      Reserved1;          /*0x01 */
+	U16                     Reserved2;          /*0x02 */
+} MPI2_IOUNIT10_FUNCTION,
+	*PTR_MPI2_IOUNIT10_FUNCTION,
+	Mpi2IOUnit10Function_t,
+	*pMpi2IOUnit10Function_t;
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumFunctions at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES
+#define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES      (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 {
+	MPI2_CONFIG_PAGE_HEADER Header;                      /*0x00 */
+	U8                      NumFunctions;                /*0x04 */
+	U8                      Reserved1;                   /*0x05 */
+	U16                     Reserved2;                   /*0x06 */
+	U32                     Reserved3;                   /*0x08 */
+	U32                     Reserved4;                   /*0x0C */
+	MPI2_IOUNIT10_FUNCTION
+		Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/*0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_10,
+	*PTR_MPI2_CONFIG_PAGE_IO_UNIT_10,
+	Mpi2IOUnitPage10_t, *pMpi2IOUnitPage10_t;
+
+#define MPI2_IOUNITPAGE10_PAGEVERSION                   (0x01)
+
+
+/* IO Unit Page 11 (for MPI v2.6 and later) */
+
+typedef struct _MPI26_IOUNIT11_SPINUP_GROUP {
+	U8          MaxTargetSpinup;            /* 0x00 */
+	U8          SpinupDelay;                /* 0x01 */
+	U8          SpinupFlags;                /* 0x02 */
+	U8          Reserved1;                  /* 0x03 */
+} MPI26_IOUNIT11_SPINUP_GROUP,
+	*PTR_MPI26_IOUNIT11_SPINUP_GROUP,
+	Mpi26IOUnit11SpinupGroup_t,
+	*pMpi26IOUnit11SpinupGroup_t;
+
+/* defines for IO Unit Page 11 SpinupFlags */
+#define MPI26_IOUNITPAGE11_SPINUP_DISABLE_FLAG          (0x01)
+
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * four and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI26_IOUNITPAGE11_PHY_MAX
+#define MPI26_IOUNITPAGE11_PHY_MAX        (4)
+#endif
+
+typedef struct _MPI26_CONFIG_PAGE_IO_UNIT_11 {
+	MPI2_CONFIG_PAGE_HEADER       Header;			       /*0x00 */
+	U32                           Reserved1;                      /*0x04 */
+	MPI26_IOUNIT11_SPINUP_GROUP   SpinupGroupParameters[4];       /*0x08 */
+	U32                           Reserved2;                      /*0x18 */
+	U32                           Reserved3;                      /*0x1C */
+	U32                           Reserved4;                      /*0x20 */
+	U8                            BootDeviceWaitTime;             /*0x24 */
+	U8                            Reserved5;                      /*0x25 */
+	U16                           Reserved6;                      /*0x26 */
+	U8                            NumPhys;                        /*0x28 */
+	U8                            PEInitialSpinupDelay;           /*0x29 */
+	U8                            PEReplyDelay;                   /*0x2A */
+	U8                            Flags;                          /*0x2B */
+	U8			      PHY[MPI26_IOUNITPAGE11_PHY_MAX];/*0x2C */
+} MPI26_CONFIG_PAGE_IO_UNIT_11,
+	*PTR_MPI26_CONFIG_PAGE_IO_UNIT_11,
+	Mpi26IOUnitPage11_t,
+	*pMpi26IOUnitPage11_t;
+
+#define MPI26_IOUNITPAGE11_PAGEVERSION                  (0x00)
+
+/* defines for Flags field */
+#define MPI26_IOUNITPAGE11_FLAGS_AUTO_PORTENABLE        (0x01)
+
+/* defines for PHY field */
+#define MPI26_IOUNITPAGE11_PHY_SPINUP_GROUP_MASK        (0x03)
+
+
+
+
+
+
+/****************************************************************************
+*  IOC Config Pages
+****************************************************************************/
+
+/*IOC Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_IOC_0 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	U32                     Reserved1;                  /*0x04 */
+	U32                     Reserved2;                  /*0x08 */
+	U16                     VendorID;                   /*0x0C */
+	U16                     DeviceID;                   /*0x0E */
+	U8                      RevisionID;                 /*0x10 */
+	U8                      Reserved3;                  /*0x11 */
+	U16                     Reserved4;                  /*0x12 */
+	U32                     ClassCode;                  /*0x14 */
+	U16                     SubsystemVendorID;          /*0x18 */
+	U16                     SubsystemID;                /*0x1A */
+} MPI2_CONFIG_PAGE_IOC_0,
+	*PTR_MPI2_CONFIG_PAGE_IOC_0,
+	Mpi2IOCPage0_t, *pMpi2IOCPage0_t;
+
+#define MPI2_IOCPAGE0_PAGEVERSION                       (0x02)
+
+
+/*IOC Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_IOC_1 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	U32                     Flags;                      /*0x04 */
+	U32                     CoalescingTimeout;          /*0x08 */
+	U8                      CoalescingDepth;            /*0x0C */
+	U8                      PCISlotNum;                 /*0x0D */
+	U8                      PCIBusNum;                  /*0x0E */
+	U8                      PCIDomainSegment;           /*0x0F */
+	U32                     Reserved1;                  /*0x10 */
+	U32                     ProductSpecific;            /* 0x14 */
+} MPI2_CONFIG_PAGE_IOC_1,
+	*PTR_MPI2_CONFIG_PAGE_IOC_1,
+	Mpi2IOCPage1_t, *pMpi2IOCPage1_t;
+
+#define MPI2_IOCPAGE1_PAGEVERSION                       (0x05)
+
+/*defines for IOC Page 1 Flags field */
+#define MPI2_IOCPAGE1_REPLY_COALESCING                  (0x00000001)
+
+#define MPI2_IOCPAGE1_PCISLOTNUM_UNKNOWN                (0xFF)
+#define MPI2_IOCPAGE1_PCIBUSNUM_UNKNOWN                 (0xFF)
+#define MPI2_IOCPAGE1_PCIDOMAIN_UNKNOWN                 (0xFF)
+
+/*IOC Page 6 */
+
+typedef struct _MPI2_CONFIG_PAGE_IOC_6 {
+	MPI2_CONFIG_PAGE_HEADER Header;         /*0x00 */
+	U32
+		CapabilitiesFlags;              /*0x04 */
+	U8                      MaxDrivesRAID0; /*0x08 */
+	U8                      MaxDrivesRAID1; /*0x09 */
+	U8
+		 MaxDrivesRAID1E;                /*0x0A */
+	U8
+		 MaxDrivesRAID10;		/*0x0B */
+	U8                      MinDrivesRAID0; /*0x0C */
+	U8                      MinDrivesRAID1; /*0x0D */
+	U8
+		 MinDrivesRAID1E;                /*0x0E */
+	U8
+		 MinDrivesRAID10;                /*0x0F */
+	U32                     Reserved1;      /*0x10 */
+	U8
+		 MaxGlobalHotSpares;             /*0x14 */
+	U8                      MaxPhysDisks;   /*0x15 */
+	U8                      MaxVolumes;     /*0x16 */
+	U8                      MaxConfigs;     /*0x17 */
+	U8                      MaxOCEDisks;    /*0x18 */
+	U8                      Reserved2;      /*0x19 */
+	U16                     Reserved3;      /*0x1A */
+	U32
+		SupportedStripeSizeMapRAID0;    /*0x1C */
+	U32
+		SupportedStripeSizeMapRAID1E;   /*0x20 */
+	U32
+		SupportedStripeSizeMapRAID10;   /*0x24 */
+	U32                     Reserved4;      /*0x28 */
+	U32                     Reserved5;      /*0x2C */
+	U16
+		DefaultMetadataSize;            /*0x30 */
+	U16                     Reserved6;      /*0x32 */
+	U16
+		MaxBadBlockTableEntries;        /*0x34 */
+	U16                     Reserved7;      /*0x36 */
+	U32
+		IRNvsramVersion;                /*0x38 */
+} MPI2_CONFIG_PAGE_IOC_6,
+	*PTR_MPI2_CONFIG_PAGE_IOC_6,
+	Mpi2IOCPage6_t, *pMpi2IOCPage6_t;
+
+#define MPI2_IOCPAGE6_PAGEVERSION                       (0x05)
+
+/*defines for IOC Page 6 CapabilitiesFlags */
+#define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT      (0x00000020)
+#define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT          (0x00000010)
+#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT           (0x00000008)
+#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT          (0x00000004)
+#define MPI2_IOCPAGE6_CAP_FLAGS_RAID0_SUPPORT           (0x00000002)
+#define MPI2_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE        (0x00000001)
+
+
+/*IOC Page 7 */
+
+#define MPI2_IOCPAGE7_EVENTMASK_WORDS       (4)
+
+typedef struct _MPI2_CONFIG_PAGE_IOC_7 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	U32                     Reserved1;                  /*0x04 */
+	U32
+		EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/*0x08 */
+	U16                     SASBroadcastPrimitiveMasks; /*0x18 */
+	U16                     SASNotifyPrimitiveMasks;    /*0x1A */
+	U32                     Reserved3;                  /*0x1C */
+} MPI2_CONFIG_PAGE_IOC_7,
+	*PTR_MPI2_CONFIG_PAGE_IOC_7,
+	Mpi2IOCPage7_t, *pMpi2IOCPage7_t;
+
+#define MPI2_IOCPAGE7_PAGEVERSION                       (0x02)
+
+
+/*IOC Page 8 */
+
+typedef struct _MPI2_CONFIG_PAGE_IOC_8 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	U8                      NumDevsPerEnclosure;        /*0x04 */
+	U8                      Reserved1;                  /*0x05 */
+	U16                     Reserved2;                  /*0x06 */
+	U16                     MaxPersistentEntries;       /*0x08 */
+	U16                     MaxNumPhysicalMappedIDs;    /*0x0A */
+	U16                     Flags;                      /*0x0C */
+	U16                     Reserved3;                  /*0x0E */
+	U16                     IRVolumeMappingFlags;       /*0x10 */
+	U16                     Reserved4;                  /*0x12 */
+	U32                     Reserved5;                  /*0x14 */
+} MPI2_CONFIG_PAGE_IOC_8,
+	*PTR_MPI2_CONFIG_PAGE_IOC_8,
+	Mpi2IOCPage8_t, *pMpi2IOCPage8_t;
+
+#define MPI2_IOCPAGE8_PAGEVERSION                       (0x00)
+
+/*defines for IOC Page 8 Flags field */
+#define MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1             (0x00000020)
+#define MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0         (0x00000010)
+
+#define MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE           (0x0000000E)
+#define MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING  (0x00000000)
+#define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING      (0x00000002)
+
+#define MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING  (0x00000001)
+#define MPI2_IOCPAGE8_FLAGS_ENABLE_PERSISTENT_MAPPING   (0x00000000)
+
+/*defines for IOC Page 8 IRVolumeMappingFlags */
+#define MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE  (0x00000003)
+#define MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING        (0x00000000)
+#define MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING       (0x00000001)
+
+
+/****************************************************************************
+*  BIOS Config Pages
+****************************************************************************/
+
+/*BIOS Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	U32                     BiosOptions;                /*0x04 */
+	U32                     IOCSettings;                /*0x08 */
+	U8                      SSUTimeout;                 /*0x0C */
+	U8                      MaxEnclosureLevel;          /*0x0D */
+	U16                     Reserved2;                  /*0x0E */
+	U32                     DeviceSettings;             /*0x10 */
+	U16                     NumberOfDevices;            /*0x14 */
+	U16                     UEFIVersion;                /*0x16 */
+	U16                     IOTimeoutBlockDevicesNonRM; /*0x18 */
+	U16                     IOTimeoutSequential;        /*0x1A */
+	U16                     IOTimeoutOther;             /*0x1C */
+	U16                     IOTimeoutBlockDevicesRM;    /*0x1E */
+} MPI2_CONFIG_PAGE_BIOS_1,
+	*PTR_MPI2_CONFIG_PAGE_BIOS_1,
+	Mpi2BiosPage1_t, *pMpi2BiosPage1_t;
+
+#define MPI2_BIOSPAGE1_PAGEVERSION                      (0x07)
+
+/*values for BIOS Page 1 BiosOptions field */
+#define MPI2_BIOSPAGE1_OPTIONS_BOOT_LIST_ADD_ALT_BOOT_DEVICE    (0x00008000)
+#define MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG                  (0x00004000)
+
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK                         (0x00003800)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL                        (0x00000000)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE                   (0x00000800)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_LWWID                        (0x00001000)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_PSENS                        (0x00001800)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_ESPHY                        (0x00002000)
+
+#define MPI2_BIOSPAGE1_OPTIONS_X86_DISABLE_BIOS		(0x00000400)
+
+#define MPI2_BIOSPAGE1_OPTIONS_MASK_REGISTRATION_UEFI_BSD	(0x00000300)
+#define MPI2_BIOSPAGE1_OPTIONS_USE_BIT0_REGISTRATION_UEFI_BSD	(0x00000000)
+#define MPI2_BIOSPAGE1_OPTIONS_FULL_REGISTRATION_UEFI_BSD	(0x00000100)
+#define MPI2_BIOSPAGE1_OPTIONS_ADAPTER_REGISTRATION_UEFI_BSD	(0x00000200)
+#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_REGISTRATION_UEFI_BSD	(0x00000300)
+
+#define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID                  (0x000000F0)
+#define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID                   (0x00000000)
+
+#define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION   (0x00000006)
+#define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII              (0x00000000)
+#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII             (0x00000002)
+#define MPI2_BIOSPAGE1_OPTIONS_VERSION_CHECK_UEFI_HII       (0x00000004)
+
+#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS                 (0x00000001)
+
+/*values for BIOS Page 1 IOCSettings field */
+#define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE      (0x00030000)
+#define MPI2_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT       (0x00000000)
+#define MPI2_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT          (0x00010000)
+
+#define MPI2_BIOSPAGE1_IOCSET_MASK_RM_SETTING           (0x000000C0)
+#define MPI2_BIOSPAGE1_IOCSET_NONE_RM_SETTING           (0x00000000)
+#define MPI2_BIOSPAGE1_IOCSET_BOOT_RM_SETTING           (0x00000040)
+#define MPI2_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING          (0x00000080)
+
+#define MPI2_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT      (0x00000030)
+#define MPI2_BIOSPAGE1_IOCSET_NO_SUPPORT                (0x00000000)
+#define MPI2_BIOSPAGE1_IOCSET_BIOS_SUPPORT              (0x00000010)
+#define MPI2_BIOSPAGE1_IOCSET_OS_SUPPORT                (0x00000020)
+#define MPI2_BIOSPAGE1_IOCSET_ALL_SUPPORT               (0x00000030)
+
+#define MPI2_BIOSPAGE1_IOCSET_ALTERNATE_CHS             (0x00000008)
+
+/*values for BIOS Page 1 DeviceSettings field */
+#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING     (0x00000010)
+#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN           (0x00000008)
+#define MPI2_BIOSPAGE1_DEVSET_DISABLE_RM_LUN            (0x00000004)
+#define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN        (0x00000002)
+#define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN         (0x00000001)
+
+/*defines for BIOS Page 1 UEFIVersion field */
+#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_MASK              (0xFF00)
+#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_SHIFT             (8)
+#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_MASK              (0x00FF)
+#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_SHIFT             (0)
+
+
+
+/*BIOS Page 2 */
+
+typedef struct _MPI2_BOOT_DEVICE_ADAPTER_ORDER {
+	U32         Reserved1;                              /*0x00 */
+	U32         Reserved2;                              /*0x04 */
+	U32         Reserved3;                              /*0x08 */
+	U32         Reserved4;                              /*0x0C */
+	U32         Reserved5;                              /*0x10 */
+	U32         Reserved6;                              /*0x14 */
+} MPI2_BOOT_DEVICE_ADAPTER_ORDER,
+	*PTR_MPI2_BOOT_DEVICE_ADAPTER_ORDER,
+	Mpi2BootDeviceAdapterOrder_t,
+	*pMpi2BootDeviceAdapterOrder_t;
+
+typedef struct _MPI2_BOOT_DEVICE_SAS_WWID {
+	U64         SASAddress;                             /*0x00 */
+	U8          LUN[8];                                 /*0x08 */
+	U32         Reserved1;                              /*0x10 */
+	U32         Reserved2;                              /*0x14 */
+} MPI2_BOOT_DEVICE_SAS_WWID,
+	*PTR_MPI2_BOOT_DEVICE_SAS_WWID,
+	Mpi2BootDeviceSasWwid_t,
+	*pMpi2BootDeviceSasWwid_t;
+
+typedef struct _MPI2_BOOT_DEVICE_ENCLOSURE_SLOT {
+	U64         EnclosureLogicalID;                     /*0x00 */
+	U32         Reserved1;                              /*0x08 */
+	U32         Reserved2;                              /*0x0C */
+	U16         SlotNumber;                             /*0x10 */
+	U16         Reserved3;                              /*0x12 */
+	U32         Reserved4;                              /*0x14 */
+} MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
+	*PTR_MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
+	Mpi2BootDeviceEnclosureSlot_t,
+	*pMpi2BootDeviceEnclosureSlot_t;
+
+typedef struct _MPI2_BOOT_DEVICE_DEVICE_NAME {
+	U64         DeviceName;                             /*0x00 */
+	U8          LUN[8];                                 /*0x08 */
+	U32         Reserved1;                              /*0x10 */
+	U32         Reserved2;                              /*0x14 */
+} MPI2_BOOT_DEVICE_DEVICE_NAME,
+	*PTR_MPI2_BOOT_DEVICE_DEVICE_NAME,
+	Mpi2BootDeviceDeviceName_t,
+	*pMpi2BootDeviceDeviceName_t;
+
+typedef union _MPI2_MPI2_BIOSPAGE2_BOOT_DEVICE {
+	MPI2_BOOT_DEVICE_ADAPTER_ORDER  AdapterOrder;
+	MPI2_BOOT_DEVICE_SAS_WWID       SasWwid;
+	MPI2_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot;
+	MPI2_BOOT_DEVICE_DEVICE_NAME    DeviceName;
+} MPI2_BIOSPAGE2_BOOT_DEVICE,
+	*PTR_MPI2_BIOSPAGE2_BOOT_DEVICE,
+	Mpi2BiosPage2BootDevice_t,
+	*pMpi2BiosPage2BootDevice_t;
+
+typedef struct _MPI2_CONFIG_PAGE_BIOS_2 {
+	MPI2_CONFIG_PAGE_HEADER     Header;                 /*0x00 */
+	U32                         Reserved1;              /*0x04 */
+	U32                         Reserved2;              /*0x08 */
+	U32                         Reserved3;              /*0x0C */
+	U32                         Reserved4;              /*0x10 */
+	U32                         Reserved5;              /*0x14 */
+	U32                         Reserved6;              /*0x18 */
+	U8                          ReqBootDeviceForm;      /*0x1C */
+	U8                          Reserved7;              /*0x1D */
+	U16                         Reserved8;              /*0x1E */
+	MPI2_BIOSPAGE2_BOOT_DEVICE  RequestedBootDevice;    /*0x20 */
+	U8                          ReqAltBootDeviceForm;   /*0x38 */
+	U8                          Reserved9;              /*0x39 */
+	U16                         Reserved10;             /*0x3A */
+	MPI2_BIOSPAGE2_BOOT_DEVICE  RequestedAltBootDevice; /*0x3C */
+	U8                          CurrentBootDeviceForm;  /*0x58 */
+	U8                          Reserved11;             /*0x59 */
+	U16                         Reserved12;             /*0x5A */
+	MPI2_BIOSPAGE2_BOOT_DEVICE  CurrentBootDevice;      /*0x58 */
+} MPI2_CONFIG_PAGE_BIOS_2, *PTR_MPI2_CONFIG_PAGE_BIOS_2,
+	Mpi2BiosPage2_t, *pMpi2BiosPage2_t;
+
+#define MPI2_BIOSPAGE2_PAGEVERSION                      (0x04)
+
+/*values for BIOS Page 2 BootDeviceForm fields */
+#define MPI2_BIOSPAGE2_FORM_MASK                        (0x0F)
+#define MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED         (0x00)
+#define MPI2_BIOSPAGE2_FORM_SAS_WWID                    (0x05)
+#define MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT              (0x06)
+#define MPI2_BIOSPAGE2_FORM_DEVICE_NAME                 (0x07)
+
+
+/*BIOS Page 3 */
+
+#define MPI2_BIOSPAGE3_NUM_ADAPTER      (4)
+
+typedef struct _MPI2_ADAPTER_INFO {
+	U8      PciBusNumber;                        /*0x00 */
+	U8      PciDeviceAndFunctionNumber;          /*0x01 */
+	U16     AdapterFlags;                        /*0x02 */
+} MPI2_ADAPTER_INFO, *PTR_MPI2_ADAPTER_INFO,
+	Mpi2AdapterInfo_t, *pMpi2AdapterInfo_t;
+
+#define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED                (0x0001)
+#define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS             (0x0002)
+
+typedef struct _MPI2_ADAPTER_ORDER_AUX {
+	U64     WWID;					/* 0x00 */
+	U32     Reserved1;				/* 0x08 */
+	U32     Reserved2;				/* 0x0C */
+} MPI2_ADAPTER_ORDER_AUX, *PTR_MPI2_ADAPTER_ORDER_AUX,
+	Mpi2AdapterOrderAux_t, *pMpi2AdapterOrderAux_t;
+
+
+typedef struct _MPI2_CONFIG_PAGE_BIOS_3 {
+	MPI2_CONFIG_PAGE_HEADER Header;              /*0x00 */
+	U32                     GlobalFlags;         /*0x04 */
+	U32                     BiosVersion;         /*0x08 */
+	MPI2_ADAPTER_INFO       AdapterOrder[MPI2_BIOSPAGE3_NUM_ADAPTER];
+	U32                     Reserved1;           /*0x1C */
+	MPI2_ADAPTER_ORDER_AUX  AdapterOrderAux[MPI2_BIOSPAGE3_NUM_ADAPTER];
+} MPI2_CONFIG_PAGE_BIOS_3,
+	*PTR_MPI2_CONFIG_PAGE_BIOS_3,
+	Mpi2BiosPage3_t, *pMpi2BiosPage3_t;
+
+#define MPI2_BIOSPAGE3_PAGEVERSION                      (0x01)
+
+/*values for BIOS Page 3 GlobalFlags */
+#define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR             (0x00000002)
+#define MPI2_BIOSPAGE3_FLAGS_VERBOSE_ENABLE             (0x00000004)
+#define MPI2_BIOSPAGE3_FLAGS_HOOK_INT_40_DISABLE        (0x00000010)
+
+#define MPI2_BIOSPAGE3_FLAGS_DEV_LIST_DISPLAY_MASK      (0x000000E0)
+#define MPI2_BIOSPAGE3_FLAGS_INSTALLED_DEV_DISPLAY      (0x00000000)
+#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DISPLAY            (0x00000020)
+#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DEV_DISPLAY        (0x00000040)
+
+
+/*BIOS Page 4 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES
+#define MPI2_BIOS_PAGE_4_PHY_ENTRIES        (1)
+#endif
+
+typedef struct _MPI2_BIOS4_ENTRY {
+	U64                     ReassignmentWWID;       /*0x00 */
+	U64                     ReassignmentDeviceName; /*0x08 */
+} MPI2_BIOS4_ENTRY, *PTR_MPI2_BIOS4_ENTRY,
+	Mpi2MBios4Entry_t, *pMpi2Bios4Entry_t;
+
+typedef struct _MPI2_CONFIG_PAGE_BIOS_4 {
+	MPI2_CONFIG_PAGE_HEADER Header;             /*0x00 */
+	U8                      NumPhys;            /*0x04 */
+	U8                      Reserved1;          /*0x05 */
+	U16                     Reserved2;          /*0x06 */
+	MPI2_BIOS4_ENTRY
+		Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES];  /*0x08 */
+} MPI2_CONFIG_PAGE_BIOS_4, *PTR_MPI2_CONFIG_PAGE_BIOS_4,
+	Mpi2BiosPage4_t, *pMpi2BiosPage4_t;
+
+#define MPI2_BIOSPAGE4_PAGEVERSION                      (0x01)
+
+
+/****************************************************************************
+*  RAID Volume Config Pages
+****************************************************************************/
+
+/*RAID Volume Page 0 */
+
+typedef struct _MPI2_RAIDVOL0_PHYS_DISK {
+	U8                      RAIDSetNum;        /*0x00 */
+	U8                      PhysDiskMap;       /*0x01 */
+	U8                      PhysDiskNum;       /*0x02 */
+	U8                      Reserved;          /*0x03 */
+} MPI2_RAIDVOL0_PHYS_DISK, *PTR_MPI2_RAIDVOL0_PHYS_DISK,
+	Mpi2RaidVol0PhysDisk_t, *pMpi2RaidVol0PhysDisk_t;
+
+/*defines for the PhysDiskMap field */
+#define MPI2_RAIDVOL0_PHYSDISK_PRIMARY                  (0x01)
+#define MPI2_RAIDVOL0_PHYSDISK_SECONDARY                (0x02)
+
+typedef struct _MPI2_RAIDVOL0_SETTINGS {
+	U16                     Settings;          /*0x00 */
+	U8                      HotSparePool;      /*0x01 */
+	U8                      Reserved;          /*0x02 */
+} MPI2_RAIDVOL0_SETTINGS, *PTR_MPI2_RAIDVOL0_SETTINGS,
+	Mpi2RaidVol0Settings_t,
+	*pMpi2RaidVol0Settings_t;
+
+/*RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */
+#define MPI2_RAID_HOT_SPARE_POOL_0                      (0x01)
+#define MPI2_RAID_HOT_SPARE_POOL_1                      (0x02)
+#define MPI2_RAID_HOT_SPARE_POOL_2                      (0x04)
+#define MPI2_RAID_HOT_SPARE_POOL_3                      (0x08)
+#define MPI2_RAID_HOT_SPARE_POOL_4                      (0x10)
+#define MPI2_RAID_HOT_SPARE_POOL_5                      (0x20)
+#define MPI2_RAID_HOT_SPARE_POOL_6                      (0x40)
+#define MPI2_RAID_HOT_SPARE_POOL_7                      (0x80)
+
+/*RAID Volume Page 0 VolumeSettings defines */
+#define MPI2_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX     (0x0008)
+#define MPI2_RAIDVOL0_SETTING_AUTO_CONFIG_HSWAP_DISABLE (0x0004)
+
+#define MPI2_RAIDVOL0_SETTING_MASK_WRITE_CACHING        (0x0003)
+#define MPI2_RAIDVOL0_SETTING_UNCHANGED                 (0x0000)
+#define MPI2_RAIDVOL0_SETTING_DISABLE_WRITE_CACHING     (0x0001)
+#define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING      (0x0002)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhysDisks at runtime.
+ */
+#ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX
+#define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX       (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0 {
+	MPI2_CONFIG_PAGE_HEADER Header;            /*0x00 */
+	U16                     DevHandle;         /*0x04 */
+	U8                      VolumeState;       /*0x06 */
+	U8                      VolumeType;        /*0x07 */
+	U32                     VolumeStatusFlags; /*0x08 */
+	MPI2_RAIDVOL0_SETTINGS  VolumeSettings;    /*0x0C */
+	U64                     MaxLBA;            /*0x10 */
+	U32                     StripeSize;        /*0x18 */
+	U16                     BlockSize;         /*0x1C */
+	U16                     Reserved1;         /*0x1E */
+	U8                      SupportedPhysDisks;/*0x20 */
+	U8                      ResyncRate;        /*0x21 */
+	U16                     DataScrubDuration; /*0x22 */
+	U8                      NumPhysDisks;      /*0x24 */
+	U8                      Reserved2;         /*0x25 */
+	U8                      Reserved3;         /*0x26 */
+	U8                      InactiveStatus;    /*0x27 */
+	MPI2_RAIDVOL0_PHYS_DISK
+	PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /*0x28 */
+} MPI2_CONFIG_PAGE_RAID_VOL_0,
+	*PTR_MPI2_CONFIG_PAGE_RAID_VOL_0,
+	Mpi2RaidVolPage0_t, *pMpi2RaidVolPage0_t;
+
+#define MPI2_RAIDVOLPAGE0_PAGEVERSION           (0x0A)
+
+/*values for RAID VolumeState */
+#define MPI2_RAID_VOL_STATE_MISSING                         (0x00)
+#define MPI2_RAID_VOL_STATE_FAILED                          (0x01)
+#define MPI2_RAID_VOL_STATE_INITIALIZING                    (0x02)
+#define MPI2_RAID_VOL_STATE_ONLINE                          (0x03)
+#define MPI2_RAID_VOL_STATE_DEGRADED                        (0x04)
+#define MPI2_RAID_VOL_STATE_OPTIMAL                         (0x05)
+
+/*values for RAID VolumeType */
+#define MPI2_RAID_VOL_TYPE_RAID0                            (0x00)
+#define MPI2_RAID_VOL_TYPE_RAID1E                           (0x01)
+#define MPI2_RAID_VOL_TYPE_RAID1                            (0x02)
+#define MPI2_RAID_VOL_TYPE_RAID10                           (0x05)
+#define MPI2_RAID_VOL_TYPE_UNKNOWN                          (0xFF)
+
+/*values for RAID Volume Page 0 VolumeStatusFlags field */
+#define MPI2_RAIDVOL0_STATUS_FLAG_PENDING_RESYNC            (0x02000000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_BACKG_INIT_PENDING        (0x01000000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_MDC_PENDING               (0x00800000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_USER_CONSIST_PENDING      (0x00400000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_MAKE_DATA_CONSISTENT      (0x00200000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_DATA_SCRUB                (0x00100000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_CONSISTENCY_CHECK         (0x00080000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION        (0x00040000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT           (0x00020000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS        (0x00010000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT        (0x00000080)
+#define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED               (0x00000040)
+#define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE              (0x00000020)
+#define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR          (0x00000000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_1E_ADJACENT_MIRROR        (0x00000010)
+#define MPI2_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL      (0x00000008)
+#define MPI2_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE           (0x00000004)
+#define MPI2_RAIDVOL0_STATUS_FLAG_QUIESCED                  (0x00000002)
+#define MPI2_RAIDVOL0_STATUS_FLAG_ENABLED                   (0x00000001)
+
+/*values for RAID Volume Page 0 SupportedPhysDisks field */
+#define MPI2_RAIDVOL0_SUPPORT_SOLID_STATE_DISKS             (0x08)
+#define MPI2_RAIDVOL0_SUPPORT_HARD_DISKS                    (0x04)
+#define MPI2_RAIDVOL0_SUPPORT_SAS_PROTOCOL                  (0x02)
+#define MPI2_RAIDVOL0_SUPPORT_SATA_PROTOCOL                 (0x01)
+
+/*values for RAID Volume Page 0 InactiveStatus field */
+#define MPI2_RAIDVOLPAGE0_UNKNOWN_INACTIVE                  (0x00)
+#define MPI2_RAIDVOLPAGE0_STALE_METADATA_INACTIVE           (0x01)
+#define MPI2_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE           (0x02)
+#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE    (0x03)
+#define MPI2_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE             (0x04)
+#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE    (0x05)
+#define MPI2_RAIDVOLPAGE0_PREVIOUSLY_DELETED                (0x06)
+
+
+/*RAID Volume Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_1 {
+	MPI2_CONFIG_PAGE_HEADER Header;                     /*0x00 */
+	U16                     DevHandle;                  /*0x04 */
+	U16                     Reserved0;                  /*0x06 */
+	U8                      GUID[24];                   /*0x08 */
+	U8                      Name[16];                   /*0x20 */
+	U64                     WWID;                       /*0x30 */
+	U32                     Reserved1;                  /*0x38 */
+	U32                     Reserved2;                  /*0x3C */
+} MPI2_CONFIG_PAGE_RAID_VOL_1,
+	*PTR_MPI2_CONFIG_PAGE_RAID_VOL_1,
+	Mpi2RaidVolPage1_t, *pMpi2RaidVolPage1_t;
+
+#define MPI2_RAIDVOLPAGE1_PAGEVERSION           (0x03)
+
+
+/****************************************************************************
+*  RAID Physical Disk Config Pages
+****************************************************************************/
+
+/*RAID Physical Disk Page 0 */
+
+typedef struct _MPI2_RAIDPHYSDISK0_SETTINGS {
+	U16                     Reserved1;                  /*0x00 */
+	U8                      HotSparePool;               /*0x02 */
+	U8                      Reserved2;                  /*0x03 */
+} MPI2_RAIDPHYSDISK0_SETTINGS,
+	*PTR_MPI2_RAIDPHYSDISK0_SETTINGS,
+	Mpi2RaidPhysDisk0Settings_t,
+	*pMpi2RaidPhysDisk0Settings_t;
+
+/*use MPI2_RAID_HOT_SPARE_POOL_ defines for the HotSparePool field */
+
+typedef struct _MPI2_RAIDPHYSDISK0_INQUIRY_DATA {
+	U8                      VendorID[8];                /*0x00 */
+	U8                      ProductID[16];              /*0x08 */
+	U8                      ProductRevLevel[4];         /*0x18 */
+	U8                      SerialNum[32];              /*0x1C */
+} MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
+	*PTR_MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
+	Mpi2RaidPhysDisk0InquiryData_t,
+	*pMpi2RaidPhysDisk0InquiryData_t;
+
+typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 {
+	MPI2_CONFIG_PAGE_HEADER         Header;             /*0x00 */
+	U16                             DevHandle;          /*0x04 */
+	U8                              Reserved1;          /*0x06 */
+	U8                              PhysDiskNum;        /*0x07 */
+	MPI2_RAIDPHYSDISK0_SETTINGS     PhysDiskSettings;   /*0x08 */
+	U32                             Reserved2;          /*0x0C */
+	MPI2_RAIDPHYSDISK0_INQUIRY_DATA InquiryData;        /*0x10 */
+	U32                             Reserved3;          /*0x4C */
+	U8                              PhysDiskState;      /*0x50 */
+	U8                              OfflineReason;      /*0x51 */
+	U8                              IncompatibleReason; /*0x52 */
+	U8                              PhysDiskAttributes; /*0x53 */
+	U32                             PhysDiskStatusFlags;/*0x54 */
+	U64                             DeviceMaxLBA;       /*0x58 */
+	U64                             HostMaxLBA;         /*0x60 */
+	U64                             CoercedMaxLBA;      /*0x68 */
+	U16                             BlockSize;          /*0x70 */
+	U16                             Reserved5;          /*0x72 */
+	U32                             Reserved6;          /*0x74 */
+} MPI2_CONFIG_PAGE_RD_PDISK_0,
+	*PTR_MPI2_CONFIG_PAGE_RD_PDISK_0,
+	Mpi2RaidPhysDiskPage0_t,
+	*pMpi2RaidPhysDiskPage0_t;
+
+#define MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION          (0x05)
+
+/*PhysDiskState defines */
+#define MPI2_RAID_PD_STATE_NOT_CONFIGURED               (0x00)
+#define MPI2_RAID_PD_STATE_NOT_COMPATIBLE               (0x01)
+#define MPI2_RAID_PD_STATE_OFFLINE                      (0x02)
+#define MPI2_RAID_PD_STATE_ONLINE                       (0x03)
+#define MPI2_RAID_PD_STATE_HOT_SPARE                    (0x04)
+#define MPI2_RAID_PD_STATE_DEGRADED                     (0x05)
+#define MPI2_RAID_PD_STATE_REBUILDING                   (0x06)
+#define MPI2_RAID_PD_STATE_OPTIMAL                      (0x07)
+
+/*OfflineReason defines */
+#define MPI2_PHYSDISK0_ONLINE                           (0x00)
+#define MPI2_PHYSDISK0_OFFLINE_MISSING                  (0x01)
+#define MPI2_PHYSDISK0_OFFLINE_FAILED                   (0x03)
+#define MPI2_PHYSDISK0_OFFLINE_INITIALIZING             (0x04)
+#define MPI2_PHYSDISK0_OFFLINE_REQUESTED                (0x05)
+#define MPI2_PHYSDISK0_OFFLINE_FAILED_REQUESTED         (0x06)
+#define MPI2_PHYSDISK0_OFFLINE_OTHER                    (0xFF)
+
+/*IncompatibleReason defines */
+#define MPI2_PHYSDISK0_COMPATIBLE                       (0x00)
+#define MPI2_PHYSDISK0_INCOMPATIBLE_PROTOCOL            (0x01)
+#define MPI2_PHYSDISK0_INCOMPATIBLE_BLOCKSIZE           (0x02)
+#define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA             (0x03)
+#define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD   (0x04)
+#define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA    (0x05)
+#define MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE          (0x06)
+#define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN             (0xFF)
+
+/*PhysDiskAttributes defines */
+#define MPI2_PHYSDISK0_ATTRIB_MEDIA_MASK                (0x0C)
+#define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE         (0x08)
+#define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE           (0x04)
+
+#define MPI2_PHYSDISK0_ATTRIB_PROTOCOL_MASK             (0x03)
+#define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL              (0x02)
+#define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL             (0x01)
+
+/*PhysDiskStatusFlags defines */
+#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED        (0x00000040)
+#define MPI2_PHYSDISK0_STATUS_FLAG_OCE_TARGET           (0x00000020)
+#define MPI2_PHYSDISK0_STATUS_FLAG_WRITE_CACHE_ENABLED  (0x00000010)
+#define MPI2_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS     (0x00000000)
+#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x00000008)
+#define MPI2_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME      (0x00000004)
+#define MPI2_PHYSDISK0_STATUS_FLAG_QUIESCED             (0x00000002)
+#define MPI2_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC          (0x00000001)
+
+
+/*RAID Physical Disk Page 1 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhysDiskPaths at runtime.
+ */
+#ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX
+#define MPI2_RAID_PHYS_DISK1_PATH_MAX   (1)
+#endif
+
+typedef struct _MPI2_RAIDPHYSDISK1_PATH {
+	U16             DevHandle;          /*0x00 */
+	U16             Reserved1;          /*0x02 */
+	U64             WWID;               /*0x04 */
+	U64             OwnerWWID;          /*0x0C */
+	U8              OwnerIdentifier;    /*0x14 */
+	U8              Reserved2;          /*0x15 */
+	U16             Flags;              /*0x16 */
+} MPI2_RAIDPHYSDISK1_PATH, *PTR_MPI2_RAIDPHYSDISK1_PATH,
+	Mpi2RaidPhysDisk1Path_t,
+	*pMpi2RaidPhysDisk1Path_t;
+
+/*RAID Physical Disk Page 1 Physical Disk Path Flags field defines */
+#define MPI2_RAID_PHYSDISK1_FLAG_PRIMARY        (0x0004)
+#define MPI2_RAID_PHYSDISK1_FLAG_BROKEN         (0x0002)
+#define MPI2_RAID_PHYSDISK1_FLAG_INVALID        (0x0001)
+
+typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 {
+	MPI2_CONFIG_PAGE_HEADER         Header;             /*0x00 */
+	U8                              NumPhysDiskPaths;   /*0x04 */
+	U8                              PhysDiskNum;        /*0x05 */
+	U16                             Reserved1;          /*0x06 */
+	U32                             Reserved2;          /*0x08 */
+	MPI2_RAIDPHYSDISK1_PATH
+		PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/*0x0C */
+} MPI2_CONFIG_PAGE_RD_PDISK_1,
+	*PTR_MPI2_CONFIG_PAGE_RD_PDISK_1,
+	Mpi2RaidPhysDiskPage1_t,
+	*pMpi2RaidPhysDiskPage1_t;
+
+#define MPI2_RAIDPHYSDISKPAGE1_PAGEVERSION          (0x02)
+
+
+/****************************************************************************
+*  values for fields used by several types of SAS Config Pages
+****************************************************************************/
+
+/*values for NegotiatedLinkRates fields */
+#define MPI2_SAS_NEG_LINK_RATE_MASK_LOGICAL             (0xF0)
+#define MPI2_SAS_NEG_LINK_RATE_SHIFT_LOGICAL            (4)
+#define MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL            (0x0F)
+/*link rates used for Negotiated Physical and Logical Link Rate */
+#define MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE        (0x00)
+#define MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED             (0x01)
+#define MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED       (0x02)
+#define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE        (0x03)
+#define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR            (0x04)
+#define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS    (0x05)
+#define MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY          (0x06)
+#define MPI2_SAS_NEG_LINK_RATE_1_5                      (0x08)
+#define MPI2_SAS_NEG_LINK_RATE_3_0                      (0x09)
+#define MPI2_SAS_NEG_LINK_RATE_6_0                      (0x0A)
+#define MPI25_SAS_NEG_LINK_RATE_12_0                    (0x0B)
+#define MPI26_SAS_NEG_LINK_RATE_22_5                    (0x0C)
+
+
+/*values for AttachedPhyInfo fields */
+#define MPI2_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT       (0x00000040)
+#define MPI2_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS        (0x00000020)
+#define MPI2_SAS_APHYINFO_BREAK_REPLY_CAPABLE           (0x00000010)
+
+#define MPI2_SAS_APHYINFO_REASON_MASK                   (0x0000000F)
+#define MPI2_SAS_APHYINFO_REASON_UNKNOWN                (0x00000000)
+#define MPI2_SAS_APHYINFO_REASON_POWER_ON               (0x00000001)
+#define MPI2_SAS_APHYINFO_REASON_HARD_RESET             (0x00000002)
+#define MPI2_SAS_APHYINFO_REASON_SMP_PHY_CONTROL        (0x00000003)
+#define MPI2_SAS_APHYINFO_REASON_LOSS_OF_SYNC           (0x00000004)
+#define MPI2_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ       (0x00000005)
+#define MPI2_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER    (0x00000006)
+#define MPI2_SAS_APHYINFO_REASON_BREAK_TIMEOUT          (0x00000007)
+#define MPI2_SAS_APHYINFO_REASON_PHY_TEST_STOPPED       (0x00000008)
+
+
+/*values for PhyInfo fields */
+#define MPI2_SAS_PHYINFO_PHY_VACANT                     (0x80000000)
+
+#define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK       (0x18000000)
+#define MPI2_SAS_PHYINFO_SHIFT_PHY_POWER_CONDITION      (27)
+#define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE               (0x00000000)
+#define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL              (0x08000000)
+#define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER              (0x10000000)
+
+#define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS       (0x04000000)
+#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT        (0x02000000)
+#define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS               (0x01000000)
+#define MPI2_SAS_PHYINFO_ZONE_GROUP_PERSISTENT          (0x00400000)
+#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS                   (0x00200000)
+#define MPI2_SAS_PHYINFO_ZONING_ENABLED                 (0x00100000)
+
+#define MPI2_SAS_PHYINFO_REASON_MASK                    (0x000F0000)
+#define MPI2_SAS_PHYINFO_REASON_UNKNOWN                 (0x00000000)
+#define MPI2_SAS_PHYINFO_REASON_POWER_ON                (0x00010000)
+#define MPI2_SAS_PHYINFO_REASON_HARD_RESET              (0x00020000)
+#define MPI2_SAS_PHYINFO_REASON_SMP_PHY_CONTROL         (0x00030000)
+#define MPI2_SAS_PHYINFO_REASON_LOSS_OF_SYNC            (0x00040000)
+#define MPI2_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ        (0x00050000)
+#define MPI2_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER     (0x00060000)
+#define MPI2_SAS_PHYINFO_REASON_BREAK_TIMEOUT           (0x00070000)
+#define MPI2_SAS_PHYINFO_REASON_PHY_TEST_STOPPED        (0x00080000)
+
+#define MPI2_SAS_PHYINFO_MULTIPLEXING_SUPPORTED         (0x00008000)
+#define MPI2_SAS_PHYINFO_SATA_PORT_ACTIVE               (0x00004000)
+#define MPI2_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT     (0x00002000)
+#define MPI2_SAS_PHYINFO_VIRTUAL_PHY                    (0x00001000)
+
+#define MPI2_SAS_PHYINFO_MASK_PARTIAL_PATHWAY_TIME      (0x00000F00)
+#define MPI2_SAS_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME     (8)
+
+#define MPI2_SAS_PHYINFO_MASK_ROUTING_ATTRIBUTE         (0x000000F0)
+#define MPI2_SAS_PHYINFO_DIRECT_ROUTING                 (0x00000000)
+#define MPI2_SAS_PHYINFO_SUBTRACTIVE_ROUTING            (0x00000010)
+#define MPI2_SAS_PHYINFO_TABLE_ROUTING                  (0x00000020)
+
+
+/*values for SAS ProgrammedLinkRate fields */
+#define MPI2_SAS_PRATE_MAX_RATE_MASK                    (0xF0)
+#define MPI2_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE        (0x00)
+#define MPI2_SAS_PRATE_MAX_RATE_1_5                     (0x80)
+#define MPI2_SAS_PRATE_MAX_RATE_3_0                     (0x90)
+#define MPI2_SAS_PRATE_MAX_RATE_6_0                     (0xA0)
+#define MPI25_SAS_PRATE_MAX_RATE_12_0                   (0xB0)
+#define MPI26_SAS_PRATE_MAX_RATE_22_5                   (0xC0)
+#define MPI2_SAS_PRATE_MIN_RATE_MASK                    (0x0F)
+#define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE        (0x00)
+#define MPI2_SAS_PRATE_MIN_RATE_1_5                     (0x08)
+#define MPI2_SAS_PRATE_MIN_RATE_3_0                     (0x09)
+#define MPI2_SAS_PRATE_MIN_RATE_6_0                     (0x0A)
+#define MPI25_SAS_PRATE_MIN_RATE_12_0                   (0x0B)
+#define MPI26_SAS_PRATE_MIN_RATE_22_5                   (0x0C)
+
+
+/*values for SAS HwLinkRate fields */
+#define MPI2_SAS_HWRATE_MAX_RATE_MASK                   (0xF0)
+#define MPI2_SAS_HWRATE_MAX_RATE_1_5                    (0x80)
+#define MPI2_SAS_HWRATE_MAX_RATE_3_0                    (0x90)
+#define MPI2_SAS_HWRATE_MAX_RATE_6_0                    (0xA0)
+#define MPI25_SAS_HWRATE_MAX_RATE_12_0                  (0xB0)
+#define MPI26_SAS_HWRATE_MAX_RATE_22_5                  (0xC0)
+#define MPI2_SAS_HWRATE_MIN_RATE_MASK                   (0x0F)
+#define MPI2_SAS_HWRATE_MIN_RATE_1_5                    (0x08)
+#define MPI2_SAS_HWRATE_MIN_RATE_3_0                    (0x09)
+#define MPI2_SAS_HWRATE_MIN_RATE_6_0                    (0x0A)
+#define MPI25_SAS_HWRATE_MIN_RATE_12_0                  (0x0B)
+#define MPI26_SAS_HWRATE_MIN_RATE_22_5                  (0x0C)
+
+
+
+/****************************************************************************
+*  SAS IO Unit Config Pages
+****************************************************************************/
+
+/*SAS IO Unit Page 0 */
+
+typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA {
+	U8          Port;                   /*0x00 */
+	U8          PortFlags;              /*0x01 */
+	U8          PhyFlags;               /*0x02 */
+	U8          NegotiatedLinkRate;     /*0x03 */
+	U32         ControllerPhyDeviceInfo;/*0x04 */
+	U16         AttachedDevHandle;      /*0x08 */
+	U16         ControllerDevHandle;    /*0x0A */
+	U32         DiscoveryStatus;        /*0x0C */
+	U32         Reserved;               /*0x10 */
+} MPI2_SAS_IO_UNIT0_PHY_DATA,
+	*PTR_MPI2_SAS_IO_UNIT0_PHY_DATA,
+	Mpi2SasIOUnit0PhyData_t,
+	*pMpi2SasIOUnit0PhyData_t;
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT0_PHY_MAX
+#define MPI2_SAS_IOUNIT0_PHY_MAX        (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;   /*0x00 */
+	U32                                 Reserved1;/*0x08 */
+	U8                                  NumPhys;  /*0x0C */
+	U8                                  Reserved2;/*0x0D */
+	U16                                 Reserved3;/*0x0E */
+	MPI2_SAS_IO_UNIT0_PHY_DATA
+		PhyData[MPI2_SAS_IOUNIT0_PHY_MAX];    /*0x10 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_0,
+	*PTR_MPI2_CONFIG_PAGE_SASIOUNIT_0,
+	Mpi2SasIOUnitPage0_t, *pMpi2SasIOUnitPage0_t;
+
+#define MPI2_SASIOUNITPAGE0_PAGEVERSION                     (0x05)
+
+/*values for SAS IO Unit Page 0 PortFlags */
+#define MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS     (0x08)
+#define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG          (0x01)
+
+/*values for SAS IO Unit Page 0 PhyFlags */
+#define MPI2_SASIOUNIT0_PHYFLAGS_INIT_PERSIST_CONNECT       (0x40)
+#define MPI2_SASIOUNIT0_PHYFLAGS_TARG_PERSIST_CONNECT       (0x20)
+#define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED             (0x10)
+#define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED               (0x08)
+
+/*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
+
+/*see mpi2_sas.h for values for
+ *SAS IO Unit Page 0 ControllerPhyDeviceInfo values */
+
+/*values for SAS IO Unit Page 0 DiscoveryStatus */
+#define MPI2_SASIOUNIT0_DS_MAX_ENCLOSURES_EXCEED            (0x80000000)
+#define MPI2_SASIOUNIT0_DS_MAX_EXPANDERS_EXCEED             (0x40000000)
+#define MPI2_SASIOUNIT0_DS_MAX_DEVICES_EXCEED               (0x20000000)
+#define MPI2_SASIOUNIT0_DS_MAX_TOPO_PHYS_EXCEED             (0x10000000)
+#define MPI2_SASIOUNIT0_DS_DOWNSTREAM_INITIATOR             (0x08000000)
+#define MPI2_SASIOUNIT0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE    (0x00008000)
+#define MPI2_SASIOUNIT0_DS_EXP_MULTI_SUBTRACTIVE            (0x00004000)
+#define MPI2_SASIOUNIT0_DS_MULTI_PORT_DOMAIN                (0x00002000)
+#define MPI2_SASIOUNIT0_DS_TABLE_TO_SUBTRACTIVE_LINK        (0x00001000)
+#define MPI2_SASIOUNIT0_DS_UNSUPPORTED_DEVICE               (0x00000800)
+#define MPI2_SASIOUNIT0_DS_TABLE_LINK                       (0x00000400)
+#define MPI2_SASIOUNIT0_DS_SUBTRACTIVE_LINK                 (0x00000200)
+#define MPI2_SASIOUNIT0_DS_SMP_CRC_ERROR                    (0x00000100)
+#define MPI2_SASIOUNIT0_DS_SMP_FUNCTION_FAILED              (0x00000080)
+#define MPI2_SASIOUNIT0_DS_INDEX_NOT_EXIST                  (0x00000040)
+#define MPI2_SASIOUNIT0_DS_OUT_ROUTE_ENTRIES                (0x00000020)
+#define MPI2_SASIOUNIT0_DS_SMP_TIMEOUT                      (0x00000010)
+#define MPI2_SASIOUNIT0_DS_MULTIPLE_PORTS                   (0x00000004)
+#define MPI2_SASIOUNIT0_DS_UNADDRESSABLE_DEVICE             (0x00000002)
+#define MPI2_SASIOUNIT0_DS_LOOP_DETECTED                    (0x00000001)
+
+
+/*SAS IO Unit Page 1 */
+
+typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA {
+	U8          Port;                       /*0x00 */
+	U8          PortFlags;                  /*0x01 */
+	U8          PhyFlags;                   /*0x02 */
+	U8          MaxMinLinkRate;             /*0x03 */
+	U32         ControllerPhyDeviceInfo;    /*0x04 */
+	U16         MaxTargetPortConnectTime;   /*0x08 */
+	U16         Reserved1;                  /*0x0A */
+} MPI2_SAS_IO_UNIT1_PHY_DATA,
+	*PTR_MPI2_SAS_IO_UNIT1_PHY_DATA,
+	Mpi2SasIOUnit1PhyData_t,
+	*pMpi2SasIOUnit1PhyData_t;
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT1_PHY_MAX
+#define MPI2_SAS_IOUNIT1_PHY_MAX        (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header; /*0x00 */
+	U16
+		ControlFlags;                       /*0x08 */
+	U16
+		SASNarrowMaxQueueDepth;             /*0x0A */
+	U16
+		AdditionalControlFlags;             /*0x0C */
+	U16
+		SASWideMaxQueueDepth;               /*0x0E */
+	U8
+		NumPhys;                            /*0x10 */
+	U8
+		SATAMaxQDepth;                      /*0x11 */
+	U8
+		ReportDeviceMissingDelay;           /*0x12 */
+	U8
+		IODeviceMissingDelay;               /*0x13 */
+	MPI2_SAS_IO_UNIT1_PHY_DATA
+		PhyData[MPI2_SAS_IOUNIT1_PHY_MAX];  /*0x14 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_1,
+	*PTR_MPI2_CONFIG_PAGE_SASIOUNIT_1,
+	Mpi2SasIOUnitPage1_t, *pMpi2SasIOUnitPage1_t;
+
+#define MPI2_SASIOUNITPAGE1_PAGEVERSION     (0x09)
+
+/*values for SAS IO Unit Page 1 ControlFlags */
+#define MPI2_SASIOUNIT1_CONTROL_DEVICE_SELF_TEST                    (0x8000)
+#define MPI2_SASIOUNIT1_CONTROL_SATA_3_0_MAX                        (0x4000)
+#define MPI2_SASIOUNIT1_CONTROL_SATA_1_5_MAX                        (0x2000)
+#define MPI2_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE                    (0x1000)
+
+#define MPI2_SASIOUNIT1_CONTROL_MASK_DEV_SUPPORT                    (0x0600)
+#define MPI2_SASIOUNIT1_CONTROL_SHIFT_DEV_SUPPORT                   (9)
+#define MPI2_SASIOUNIT1_CONTROL_DEV_SUPPORT_BOTH                    (0x0)
+#define MPI2_SASIOUNIT1_CONTROL_DEV_SAS_SUPPORT                     (0x1)
+#define MPI2_SASIOUNIT1_CONTROL_DEV_SATA_SUPPORT                    (0x2)
+
+#define MPI2_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED             (0x0080)
+#define MPI2_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED                 (0x0040)
+#define MPI2_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED                   (0x0020)
+#define MPI2_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED                   (0x0010)
+#define MPI2_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL           (0x0008)
+#define MPI2_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL                 (0x0004)
+#define MPI2_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY                 (0x0002)
+#define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION                   (0x0001)
+
+/*values for SAS IO Unit Page 1 AdditionalControlFlags */
+#define MPI2_SASIOUNIT1_ACONTROL_DA_PERSIST_CONNECT                 (0x0100)
+#define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL          (0x0080)
+#define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION    (0x0040)
+#define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION        (0x0020)
+#define MPI2_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET   (0x0010)
+#define MPI2_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET  (0x0008)
+#define MPI2_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET   (0x0004)
+#define MPI2_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET     (0x0002)
+#define MPI2_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE               (0x0001)
+
+/*defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */
+#define MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK                 (0x7F)
+#define MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16                      (0x80)
+
+/*values for SAS IO Unit Page 1 PortFlags */
+#define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG                 (0x01)
+
+/*values for SAS IO Unit Page 1 PhyFlags */
+#define MPI2_SASIOUNIT1_PHYFLAGS_INIT_PERSIST_CONNECT               (0x40)
+#define MPI2_SASIOUNIT1_PHYFLAGS_TARG_PERSIST_CONNECT               (0x20)
+#define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE                      (0x10)
+#define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE                        (0x08)
+
+/*values for SAS IO Unit Page 1 MaxMinLinkRate */
+#define MPI2_SASIOUNIT1_MAX_RATE_MASK                               (0xF0)
+#define MPI2_SASIOUNIT1_MAX_RATE_1_5                                (0x80)
+#define MPI2_SASIOUNIT1_MAX_RATE_3_0                                (0x90)
+#define MPI2_SASIOUNIT1_MAX_RATE_6_0                                (0xA0)
+#define MPI25_SASIOUNIT1_MAX_RATE_12_0                              (0xB0)
+#define MPI26_SASIOUNIT1_MAX_RATE_22_5                              (0xC0)
+#define MPI2_SASIOUNIT1_MIN_RATE_MASK                               (0x0F)
+#define MPI2_SASIOUNIT1_MIN_RATE_1_5                                (0x08)
+#define MPI2_SASIOUNIT1_MIN_RATE_3_0                                (0x09)
+#define MPI2_SASIOUNIT1_MIN_RATE_6_0                                (0x0A)
+#define MPI25_SASIOUNIT1_MIN_RATE_12_0                              (0x0B)
+#define MPI26_SASIOUNIT1_MIN_RATE_22_5                              (0x0C)
+
+/*see mpi2_sas.h for values for
+ *SAS IO Unit Page 1 ControllerPhyDeviceInfo values */
+
+
+/*SAS IO Unit Page 4 (for MPI v2.5 and earlier) */
+
+typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP {
+	U8          MaxTargetSpinup;            /*0x00 */
+	U8          SpinupDelay;                /*0x01 */
+	U8          SpinupFlags;                /*0x02 */
+	U8          Reserved1;                  /*0x03 */
+} MPI2_SAS_IOUNIT4_SPINUP_GROUP,
+	*PTR_MPI2_SAS_IOUNIT4_SPINUP_GROUP,
+	Mpi2SasIOUnit4SpinupGroup_t,
+	*pMpi2SasIOUnit4SpinupGroup_t;
+/*defines for SAS IO Unit Page 4 SpinupFlags */
+#define MPI2_SASIOUNIT4_SPINUP_DISABLE_FLAG         (0x01)
+
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT4_PHY_MAX
+#define MPI2_SAS_IOUNIT4_PHY_MAX        (4)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;/*0x00 */
+	MPI2_SAS_IOUNIT4_SPINUP_GROUP
+		SpinupGroupParameters[4];       /*0x08 */
+	U32
+		Reserved1;                      /*0x18 */
+	U32
+		Reserved2;                      /*0x1C */
+	U32
+		Reserved3;                      /*0x20 */
+	U8
+		BootDeviceWaitTime;             /*0x24 */
+	U8
+		SATADeviceWaitTime;		/*0x25 */
+	U16
+		Reserved5;                      /*0x26 */
+	U8
+		NumPhys;                        /*0x28 */
+	U8
+		PEInitialSpinupDelay;           /*0x29 */
+	U8
+		PEReplyDelay;                   /*0x2A */
+	U8
+		Flags;                          /*0x2B */
+	U8
+		PHY[MPI2_SAS_IOUNIT4_PHY_MAX];  /*0x2C */
+} MPI2_CONFIG_PAGE_SASIOUNIT_4,
+	*PTR_MPI2_CONFIG_PAGE_SASIOUNIT_4,
+	Mpi2SasIOUnitPage4_t, *pMpi2SasIOUnitPage4_t;
+
+#define MPI2_SASIOUNITPAGE4_PAGEVERSION     (0x02)
+
+/*defines for Flags field */
+#define MPI2_SASIOUNIT4_FLAGS_AUTO_PORTENABLE               (0x01)
+
+/*defines for PHY field */
+#define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK               (0x03)
+
+
+/*SAS IO Unit Page 5 */
+
+typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS {
+	U8          ControlFlags;               /*0x00 */
+	U8          PortWidthModGroup;          /*0x01 */
+	U16         InactivityTimerExponent;    /*0x02 */
+	U8          SATAPartialTimeout;         /*0x04 */
+	U8          Reserved2;                  /*0x05 */
+	U8          SATASlumberTimeout;         /*0x06 */
+	U8          Reserved3;                  /*0x07 */
+	U8          SASPartialTimeout;          /*0x08 */
+	U8          Reserved4;                  /*0x09 */
+	U8          SASSlumberTimeout;          /*0x0A */
+	U8          Reserved5;                  /*0x0B */
+} MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
+	*PTR_MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
+	Mpi2SasIOUnit5PhyPmSettings_t,
+	*pMpi2SasIOUnit5PhyPmSettings_t;
+
+/*defines for ControlFlags field */
+#define MPI2_SASIOUNIT5_CONTROL_SAS_SLUMBER_ENABLE      (0x08)
+#define MPI2_SASIOUNIT5_CONTROL_SAS_PARTIAL_ENABLE      (0x04)
+#define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE     (0x02)
+#define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE     (0x01)
+
+/*defines for PortWidthModeGroup field */
+#define MPI2_SASIOUNIT5_PWMG_DISABLE                    (0xFF)
+
+/*defines for InactivityTimerExponent field */
+#define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER            (0x7000)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER           (12)
+#define MPI2_SASIOUNIT5_ITE_MASK_SAS_PARTIAL            (0x0700)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_PARTIAL           (8)
+#define MPI2_SASIOUNIT5_ITE_MASK_SATA_SLUMBER           (0x0070)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_SLUMBER          (4)
+#define MPI2_SASIOUNIT5_ITE_MASK_SATA_PARTIAL           (0x0007)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_PARTIAL          (0)
+
+#define MPI2_SASIOUNIT5_ITE_TEN_SECONDS                 (7)
+#define MPI2_SASIOUNIT5_ITE_ONE_SECOND                  (6)
+#define MPI2_SASIOUNIT5_ITE_HUNDRED_MILLISECONDS        (5)
+#define MPI2_SASIOUNIT5_ITE_TEN_MILLISECONDS            (4)
+#define MPI2_SASIOUNIT5_ITE_ONE_MILLISECOND             (3)
+#define MPI2_SASIOUNIT5_ITE_HUNDRED_MICROSECONDS        (2)
+#define MPI2_SASIOUNIT5_ITE_TEN_MICROSECONDS            (1)
+#define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND             (0)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT5_PHY_MAX
+#define MPI2_SAS_IOUNIT5_PHY_MAX        (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;   /*0x00 */
+	U8                                  NumPhys;  /*0x08 */
+	U8                                  Reserved1;/*0x09 */
+	U16                                 Reserved2;/*0x0A */
+	U32                                 Reserved3;/*0x0C */
+	MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS
+	SASPhyPowerManagementSettings[MPI2_SAS_IOUNIT5_PHY_MAX];/*0x10 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_5,
+	*PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5,
+	Mpi2SasIOUnitPage5_t, *pMpi2SasIOUnitPage5_t;
+
+#define MPI2_SASIOUNITPAGE5_PAGEVERSION     (0x01)
+
+
+/*SAS IO Unit Page 6 */
+
+typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS {
+	U8          CurrentStatus;              /*0x00 */
+	U8          CurrentModulation;          /*0x01 */
+	U8          CurrentUtilization;         /*0x02 */
+	U8          Reserved1;                  /*0x03 */
+	U32         Reserved2;                  /*0x04 */
+} MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
+	*PTR_MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
+	Mpi2SasIOUnit6PortWidthModGroupStatus_t,
+	*pMpi2SasIOUnit6PortWidthModGroupStatus_t;
+
+/*defines for CurrentStatus field */
+#define MPI2_SASIOUNIT6_STATUS_UNAVAILABLE                      (0x00)
+#define MPI2_SASIOUNIT6_STATUS_UNCONFIGURED                     (0x01)
+#define MPI2_SASIOUNIT6_STATUS_INVALID_CONFIG                   (0x02)
+#define MPI2_SASIOUNIT6_STATUS_LINK_DOWN                        (0x03)
+#define MPI2_SASIOUNIT6_STATUS_OBSERVATION_ONLY                 (0x04)
+#define MPI2_SASIOUNIT6_STATUS_INACTIVE                         (0x05)
+#define MPI2_SASIOUNIT6_STATUS_ACTIVE_IOUNIT                    (0x06)
+#define MPI2_SASIOUNIT6_STATUS_ACTIVE_HOST                      (0x07)
+
+/*defines for CurrentModulation field */
+#define MPI2_SASIOUNIT6_MODULATION_25_PERCENT                   (0x00)
+#define MPI2_SASIOUNIT6_MODULATION_50_PERCENT                   (0x01)
+#define MPI2_SASIOUNIT6_MODULATION_75_PERCENT                   (0x02)
+#define MPI2_SASIOUNIT6_MODULATION_100_PERCENT                  (0x03)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumGroups at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT6_GROUP_MAX
+#define MPI2_SAS_IOUNIT6_GROUP_MAX      (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                 /*0x00 */
+	U32                                 Reserved1;              /*0x08 */
+	U32                                 Reserved2;              /*0x0C */
+	U8                                  NumGroups;              /*0x10 */
+	U8                                  Reserved3;              /*0x11 */
+	U16                                 Reserved4;              /*0x12 */
+	MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS
+	PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /*0x14 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_6,
+	*PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6,
+	Mpi2SasIOUnitPage6_t, *pMpi2SasIOUnitPage6_t;
+
+#define MPI2_SASIOUNITPAGE6_PAGEVERSION     (0x00)
+
+
+/*SAS IO Unit Page 7 */
+
+typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS {
+	U8          Flags;                      /*0x00 */
+	U8          Reserved1;                  /*0x01 */
+	U16         Reserved2;                  /*0x02 */
+	U8          Threshold75Pct;             /*0x04 */
+	U8          Threshold50Pct;             /*0x05 */
+	U8          Threshold25Pct;             /*0x06 */
+	U8          Reserved3;                  /*0x07 */
+} MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
+	*PTR_MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
+	Mpi2SasIOUnit7PortWidthModGroupSettings_t,
+	*pMpi2SasIOUnit7PortWidthModGroupSettings_t;
+
+/*defines for Flags field */
+#define MPI2_SASIOUNIT7_FLAGS_ENABLE_PORT_WIDTH_MODULATION  (0x01)
+
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumGroups at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT7_GROUP_MAX
+#define MPI2_SAS_IOUNIT7_GROUP_MAX      (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER Header;             /*0x00 */
+	U8                               SamplingInterval;   /*0x08 */
+	U8                               WindowLength;       /*0x09 */
+	U16                              Reserved1;          /*0x0A */
+	U32                              Reserved2;          /*0x0C */
+	U32                              Reserved3;          /*0x10 */
+	U8                               NumGroups;          /*0x14 */
+	U8                               Reserved4;          /*0x15 */
+	U16                              Reserved5;          /*0x16 */
+	MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS
+	PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX];/*0x18 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_7,
+	*PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7,
+	Mpi2SasIOUnitPage7_t, *pMpi2SasIOUnitPage7_t;
+
+#define MPI2_SASIOUNITPAGE7_PAGEVERSION     (0x00)
+
+
+/*SAS IO Unit Page 8 */
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                         /*0x00 */
+	U32
+		Reserved1;                      /*0x08 */
+	U32
+		PowerManagementCapabilities;    /*0x0C */
+	U8
+		TxRxSleepStatus;                /*0x10 */
+	U8
+		Reserved2;                      /*0x11 */
+	U16
+		Reserved3;                      /*0x12 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_8,
+	*PTR_MPI2_CONFIG_PAGE_SASIOUNIT_8,
+	Mpi2SasIOUnitPage8_t, *pMpi2SasIOUnitPage8_t;
+
+#define MPI2_SASIOUNITPAGE8_PAGEVERSION     (0x00)
+
+/*defines for PowerManagementCapabilities field */
+#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD          (0x00001000)
+#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE        (0x00000800)
+#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE        (0x00000400)
+#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE       (0x00000200)
+#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE       (0x00000100)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD        (0x00000010)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE      (0x00000008)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE      (0x00000004)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE     (0x00000002)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE     (0x00000001)
+
+/*defines for TxRxSleepStatus field */
+#define MPI25_SASIOUNIT8_TXRXSLEEP_UNSUPPORTED          (0x00)
+#define MPI25_SASIOUNIT8_TXRXSLEEP_DISENGAGED           (0x01)
+#define MPI25_SASIOUNIT8_TXRXSLEEP_ACTIVE               (0x02)
+#define MPI25_SASIOUNIT8_TXRXSLEEP_SHUTDOWN             (0x03)
+
+
+
+/*SAS IO Unit Page 16 */
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT16 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                             /*0x00 */
+	U64
+		TimeStamp;                          /*0x08 */
+	U32
+		Reserved1;                          /*0x10 */
+	U32
+		Reserved2;                          /*0x14 */
+	U32
+		FastPathPendedRequests;             /*0x18 */
+	U32
+		FastPathUnPendedRequests;           /*0x1C */
+	U32
+		FastPathHostRequestStarts;          /*0x20 */
+	U32
+		FastPathFirmwareRequestStarts;      /*0x24 */
+	U32
+		FastPathHostCompletions;            /*0x28 */
+	U32
+		FastPathFirmwareCompletions;        /*0x2C */
+	U32
+		NonFastPathRequestStarts;           /*0x30 */
+	U32
+		NonFastPathHostCompletions;         /*0x30 */
+} MPI2_CONFIG_PAGE_SASIOUNIT16,
+	*PTR_MPI2_CONFIG_PAGE_SASIOUNIT16,
+	Mpi2SasIOUnitPage16_t, *pMpi2SasIOUnitPage16_t;
+
+#define MPI2_SASIOUNITPAGE16_PAGEVERSION    (0x00)
+
+
+/****************************************************************************
+*  SAS Expander Config Pages
+****************************************************************************/
+
+/*SAS Expander Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                     /*0x00 */
+	U8
+		PhysicalPort;               /*0x08 */
+	U8
+		ReportGenLength;            /*0x09 */
+	U16
+		EnclosureHandle;            /*0x0A */
+	U64
+		SASAddress;                 /*0x0C */
+	U32
+		DiscoveryStatus;            /*0x14 */
+	U16
+		DevHandle;                  /*0x18 */
+	U16
+		ParentDevHandle;            /*0x1A */
+	U16
+		ExpanderChangeCount;        /*0x1C */
+	U16
+		ExpanderRouteIndexes;       /*0x1E */
+	U8
+		NumPhys;                    /*0x20 */
+	U8
+		SASLevel;                   /*0x21 */
+	U16
+		Flags;                      /*0x22 */
+	U16
+		STPBusInactivityTimeLimit;  /*0x24 */
+	U16
+		STPMaxConnectTimeLimit;     /*0x26 */
+	U16
+		STP_SMP_NexusLossTime;      /*0x28 */
+	U16
+		MaxNumRoutedSasAddresses;   /*0x2A */
+	U64
+		ActiveZoneManagerSASAddress;/*0x2C */
+	U16
+		ZoneLockInactivityLimit;    /*0x34 */
+	U16
+		Reserved1;                  /*0x36 */
+	U8
+		TimeToReducedFunc;          /*0x38 */
+	U8
+		InitialTimeToReducedFunc;   /*0x39 */
+	U8
+		MaxReducedFuncTime;         /*0x3A */
+	U8
+		Reserved2;                  /*0x3B */
+} MPI2_CONFIG_PAGE_EXPANDER_0,
+	*PTR_MPI2_CONFIG_PAGE_EXPANDER_0,
+	Mpi2ExpanderPage0_t, *pMpi2ExpanderPage0_t;
+
+#define MPI2_SASEXPANDER0_PAGEVERSION       (0x06)
+
+/*values for SAS Expander Page 0 DiscoveryStatus field */
+#define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED         (0x80000000)
+#define MPI2_SAS_EXPANDER0_DS_MAX_EXPANDERS_EXCEED          (0x40000000)
+#define MPI2_SAS_EXPANDER0_DS_MAX_DEVICES_EXCEED            (0x20000000)
+#define MPI2_SAS_EXPANDER0_DS_MAX_TOPO_PHYS_EXCEED          (0x10000000)
+#define MPI2_SAS_EXPANDER0_DS_DOWNSTREAM_INITIATOR          (0x08000000)
+#define MPI2_SAS_EXPANDER0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
+#define MPI2_SAS_EXPANDER0_DS_EXP_MULTI_SUBTRACTIVE         (0x00004000)
+#define MPI2_SAS_EXPANDER0_DS_MULTI_PORT_DOMAIN             (0x00002000)
+#define MPI2_SAS_EXPANDER0_DS_TABLE_TO_SUBTRACTIVE_LINK     (0x00001000)
+#define MPI2_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE            (0x00000800)
+#define MPI2_SAS_EXPANDER0_DS_TABLE_LINK                    (0x00000400)
+#define MPI2_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK              (0x00000200)
+#define MPI2_SAS_EXPANDER0_DS_SMP_CRC_ERROR                 (0x00000100)
+#define MPI2_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED           (0x00000080)
+#define MPI2_SAS_EXPANDER0_DS_INDEX_NOT_EXIST               (0x00000040)
+#define MPI2_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES             (0x00000020)
+#define MPI2_SAS_EXPANDER0_DS_SMP_TIMEOUT                   (0x00000010)
+#define MPI2_SAS_EXPANDER0_DS_MULTIPLE_PORTS                (0x00000004)
+#define MPI2_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE          (0x00000002)
+#define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED                 (0x00000001)
+
+/*values for SAS Expander Page 0 Flags field */
+#define MPI2_SAS_EXPANDER0_FLAGS_REDUCED_FUNCTIONALITY      (0x2000)
+#define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED                (0x1000)
+#define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES    (0x0800)
+#define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES     (0x0400)
+#define MPI2_SAS_EXPANDER0_FLAGS_ZONING_SUPPORT             (0x0200)
+#define MPI2_SAS_EXPANDER0_FLAGS_ENABLED_ZONING             (0x0100)
+#define MPI2_SAS_EXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT     (0x0080)
+#define MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE       (0x0010)
+#define MPI2_SAS_EXPANDER0_FLAGS_OTHERS_CONFIG              (0x0004)
+#define MPI2_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS         (0x0002)
+#define MPI2_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG         (0x0001)
+
+
+/*SAS Expander Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_EXPANDER_1 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                     /*0x00 */
+	U8
+		PhysicalPort;               /*0x08 */
+	U8
+		Reserved1;                  /*0x09 */
+	U16
+		Reserved2;                  /*0x0A */
+	U8
+		NumPhys;                    /*0x0C */
+	U8
+		Phy;                        /*0x0D */
+	U16
+		NumTableEntriesProgrammed;  /*0x0E */
+	U8
+		ProgrammedLinkRate;         /*0x10 */
+	U8
+		HwLinkRate;                 /*0x11 */
+	U16
+		AttachedDevHandle;          /*0x12 */
+	U32
+		PhyInfo;                    /*0x14 */
+	U32
+		AttachedDeviceInfo;         /*0x18 */
+	U16
+		ExpanderDevHandle;          /*0x1C */
+	U8
+		ChangeCount;                /*0x1E */
+	U8
+		NegotiatedLinkRate;         /*0x1F */
+	U8
+		PhyIdentifier;              /*0x20 */
+	U8
+		AttachedPhyIdentifier;      /*0x21 */
+	U8
+		Reserved3;                  /*0x22 */
+	U8
+		DiscoveryInfo;              /*0x23 */
+	U32
+		AttachedPhyInfo;            /*0x24 */
+	U8
+		ZoneGroup;                  /*0x28 */
+	U8
+		SelfConfigStatus;           /*0x29 */
+	U16
+		Reserved4;                  /*0x2A */
+} MPI2_CONFIG_PAGE_EXPANDER_1,
+	*PTR_MPI2_CONFIG_PAGE_EXPANDER_1,
+	Mpi2ExpanderPage1_t, *pMpi2ExpanderPage1_t;
+
+#define MPI2_SASEXPANDER1_PAGEVERSION       (0x02)
+
+/*use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */
+
+/*use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */
+
+/*use MPI2_SAS_PHYINFO_ for the PhyInfo field */
+
+/*see mpi2_sas.h for the MPI2_SAS_DEVICE_INFO_ defines
+ *used for the AttachedDeviceInfo field */
+
+/*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
+
+/*values for SAS Expander Page 1 DiscoveryInfo field */
+#define MPI2_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED    (0x04)
+#define MPI2_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE  (0x02)
+#define MPI2_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES  (0x01)
+
+/*use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */
+
+
+/****************************************************************************
+*  SAS Device Config Pages
+****************************************************************************/
+
+/*SAS Device Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                 /*0x00 */
+	U16
+		Slot;                   /*0x08 */
+	U16
+		EnclosureHandle;        /*0x0A */
+	U64
+		SASAddress;             /*0x0C */
+	U16
+		ParentDevHandle;        /*0x14 */
+	U8
+		PhyNum;                 /*0x16 */
+	U8
+		AccessStatus;           /*0x17 */
+	U16
+		DevHandle;              /*0x18 */
+	U8
+		AttachedPhyIdentifier;  /*0x1A */
+	U8
+		ZoneGroup;              /*0x1B */
+	U32
+		DeviceInfo;             /*0x1C */
+	U16
+		Flags;                  /*0x20 */
+	U8
+		PhysicalPort;           /*0x22 */
+	U8
+		MaxPortConnections;     /*0x23 */
+	U64
+		DeviceName;             /*0x24 */
+	U8
+		PortGroups;             /*0x2C */
+	U8
+		DmaGroup;               /*0x2D */
+	U8
+		ControlGroup;           /*0x2E */
+	U8
+		EnclosureLevel;		/*0x2F */
+	U32
+		ConnectorName[4];	/*0x30 */
+	U32
+		Reserved3;              /*0x34 */
+} MPI2_CONFIG_PAGE_SAS_DEV_0,
+	*PTR_MPI2_CONFIG_PAGE_SAS_DEV_0,
+	Mpi2SasDevicePage0_t,
+	*pMpi2SasDevicePage0_t;
+
+#define MPI2_SASDEVICE0_PAGEVERSION         (0x09)
+
+/*values for SAS Device Page 0 AccessStatus field */
+#define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS                  (0x00)
+#define MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED           (0x01)
+#define MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED     (0x02)
+#define MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT  (0x03)
+#define MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION  (0x04)
+#define MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE      (0x05)
+#define MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE  (0x06)
+#define MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED             (0x07)
+/*specific values for SATA Init failures */
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN                (0x10)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT   (0x11)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG                   (0x12)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION         (0x13)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER            (0x14)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN                 (0x15)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN                (0x16)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN                (0x17)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION       (0x18)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE        (0x19)
+#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX                    (0x1F)
+
+/*see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */
+
+/*values for SAS Device Page 0 Flags field */
+#define MPI2_SAS_DEVICE0_FLAGS_UNAUTHORIZED_DEVICE          (0x8000)
+#define MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH           (0x4000)
+#define MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE           (0x2000)
+#define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE           (0x1000)
+#define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE           (0x0800)
+#define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY     (0x0400)
+#define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE             (0x0200)
+#define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE           (0x0100)
+#define MPI2_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED     (0x0080)
+#define MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED         (0x0040)
+#define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED           (0x0020)
+#define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED           (0x0010)
+#define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH         (0x0008)
+#define MPI2_SAS_DEVICE0_FLAGS_PERSIST_CAPABLE              (0x0004)
+#define MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID             (0x0002)
+#define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT               (0x0001)
+
+
+/*SAS Device Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_1 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                 /*0x00 */
+	U32
+		Reserved1;              /*0x08 */
+	U64
+		SASAddress;             /*0x0C */
+	U32
+		Reserved2;              /*0x14 */
+	U16
+		DevHandle;              /*0x18 */
+	U16
+		Reserved3;              /*0x1A */
+	U8
+		InitialRegDeviceFIS[20];/*0x1C */
+} MPI2_CONFIG_PAGE_SAS_DEV_1,
+	*PTR_MPI2_CONFIG_PAGE_SAS_DEV_1,
+	Mpi2SasDevicePage1_t,
+	*pMpi2SasDevicePage1_t;
+
+#define MPI2_SASDEVICE1_PAGEVERSION         (0x01)
+
+
+/****************************************************************************
+*  SAS PHY Config Pages
+****************************************************************************/
+
+/*SAS PHY Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                 /*0x00 */
+	U16
+		OwnerDevHandle;         /*0x08 */
+	U16
+		Reserved1;              /*0x0A */
+	U16
+		AttachedDevHandle;      /*0x0C */
+	U8
+		AttachedPhyIdentifier;  /*0x0E */
+	U8
+		Reserved2;              /*0x0F */
+	U32
+		AttachedPhyInfo;        /*0x10 */
+	U8
+		ProgrammedLinkRate;     /*0x14 */
+	U8
+		HwLinkRate;             /*0x15 */
+	U8
+		ChangeCount;            /*0x16 */
+	U8
+		Flags;                  /*0x17 */
+	U32
+		PhyInfo;                /*0x18 */
+	U8
+		NegotiatedLinkRate;     /*0x1C */
+	U8
+		Reserved3;              /*0x1D */
+	U16
+		Reserved4;              /*0x1E */
+} MPI2_CONFIG_PAGE_SAS_PHY_0,
+	*PTR_MPI2_CONFIG_PAGE_SAS_PHY_0,
+	Mpi2SasPhyPage0_t, *pMpi2SasPhyPage0_t;
+
+#define MPI2_SASPHY0_PAGEVERSION            (0x03)
+
+/*use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */
+
+/*use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */
+
+/*use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */
+
+/*values for SAS PHY Page 0 Flags field */
+#define MPI2_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC             (0x01)
+
+/*use MPI2_SAS_PHYINFO_ for the PhyInfo field */
+
+/*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
+
+
+/*SAS PHY Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                     /*0x00 */
+	U32
+		Reserved1;                  /*0x08 */
+	U32
+		InvalidDwordCount;          /*0x0C */
+	U32
+		RunningDisparityErrorCount; /*0x10 */
+	U32
+		LossDwordSynchCount;        /*0x14 */
+	U32
+		PhyResetProblemCount;       /*0x18 */
+} MPI2_CONFIG_PAGE_SAS_PHY_1,
+	*PTR_MPI2_CONFIG_PAGE_SAS_PHY_1,
+	Mpi2SasPhyPage1_t, *pMpi2SasPhyPage1_t;
+
+#define MPI2_SASPHY1_PAGEVERSION            (0x01)
+
+
+/*SAS PHY Page 2 */
+
+typedef struct _MPI2_SASPHY2_PHY_EVENT {
+	U8          PhyEventCode;       /*0x00 */
+	U8          Reserved1;          /*0x01 */
+	U16         Reserved2;          /*0x02 */
+	U32         PhyEventInfo;       /*0x04 */
+} MPI2_SASPHY2_PHY_EVENT, *PTR_MPI2_SASPHY2_PHY_EVENT,
+	Mpi2SasPhy2PhyEvent_t, *pMpi2SasPhy2PhyEvent_t;
+
+/*use MPI2_SASPHY3_EVENT_CODE_ for the PhyEventCode field */
+
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhyEvents at runtime.
+ */
+#ifndef MPI2_SASPHY2_PHY_EVENT_MAX
+#define MPI2_SASPHY2_PHY_EVENT_MAX      (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                     /*0x00 */
+	U32
+		Reserved1;                  /*0x08 */
+	U8
+		NumPhyEvents;               /*0x0C */
+	U8
+		Reserved2;                  /*0x0D */
+	U16
+		Reserved3;                  /*0x0E */
+	MPI2_SASPHY2_PHY_EVENT
+		PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX]; /*0x10 */
+} MPI2_CONFIG_PAGE_SAS_PHY_2,
+	*PTR_MPI2_CONFIG_PAGE_SAS_PHY_2,
+	Mpi2SasPhyPage2_t,
+	*pMpi2SasPhyPage2_t;
+
+#define MPI2_SASPHY2_PAGEVERSION            (0x00)
+
+
+/*SAS PHY Page 3 */
+
+typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG {
+	U8          PhyEventCode;       /*0x00 */
+	U8          Reserved1;          /*0x01 */
+	U16         Reserved2;          /*0x02 */
+	U8          CounterType;        /*0x04 */
+	U8          ThresholdWindow;    /*0x05 */
+	U8          TimeUnits;          /*0x06 */
+	U8          Reserved3;          /*0x07 */
+	U32         EventThreshold;     /*0x08 */
+	U16         ThresholdFlags;     /*0x0C */
+	U16         Reserved4;          /*0x0E */
+} MPI2_SASPHY3_PHY_EVENT_CONFIG,
+	*PTR_MPI2_SASPHY3_PHY_EVENT_CONFIG,
+	Mpi2SasPhy3PhyEventConfig_t,
+	*pMpi2SasPhy3PhyEventConfig_t;
+
+/*values for PhyEventCode field */
+#define MPI2_SASPHY3_EVENT_CODE_NO_EVENT                    (0x00)
+#define MPI2_SASPHY3_EVENT_CODE_INVALID_DWORD               (0x01)
+#define MPI2_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR     (0x02)
+#define MPI2_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC             (0x03)
+#define MPI2_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM           (0x04)
+#define MPI2_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW     (0x05)
+#define MPI2_SASPHY3_EVENT_CODE_RX_ERROR                    (0x06)
+#define MPI2_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR         (0x20)
+#define MPI2_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT           (0x21)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT           (0x22)
+#define MPI2_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT           (0x23)
+#define MPI2_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT           (0x24)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON   (0x25)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON   (0x26)
+#define MPI2_SASPHY3_EVENT_CODE_TX_BREAK                    (0x27)
+#define MPI2_SASPHY3_EVENT_CODE_RX_BREAK                    (0x28)
+#define MPI2_SASPHY3_EVENT_CODE_BREAK_TIMEOUT               (0x29)
+#define MPI2_SASPHY3_EVENT_CODE_CONNECTION                  (0x2A)
+#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED      (0x2B)
+#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME        (0x2C)
+#define MPI2_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME          (0x2D)
+#define MPI2_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME           (0x2E)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_FRAMES               (0x40)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_FRAMES               (0x41)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES         (0x42)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES         (0x43)
+#define MPI2_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED           (0x44)
+#define MPI2_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED           (0x45)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SATA_FRAMES              (0x50)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SATA_FRAMES              (0x51)
+#define MPI2_SASPHY3_EVENT_CODE_SATA_OVERFLOW               (0x52)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_FRAMES               (0x60)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_FRAMES               (0x61)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES         (0x63)
+#define MPI2_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT             (0xD0)
+#define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE    (0xD1)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AIP                      (0xD2)
+
+/*Following codes are product specific and in MPI v2.6 and later */
+#define MPI2_SASPHY3_EVENT_CODE_LCARB_WAIT_TIME		    (0xD3)
+#define MPI2_SASPHY3_EVENT_CODE_RCVD_CONN_RESP_WAIT_TIME    (0xD4)
+#define MPI2_SASPHY3_EVENT_CODE_LCCONN_TIME	            (0xD5)
+#define MPI2_SASPHY3_EVENT_CODE_SSP_TX_START_TRANSMIT	    (0xD6)
+#define MPI2_SASPHY3_EVENT_CODE_SATA_TX_START	            (0xD7)
+#define MPI2_SASPHY3_EVENT_CODE_SMP_TX_START_TRANSMT	    (0xD8)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_BREAK_CONN	    (0xD9)
+#define MPI2_SASPHY3_EVENT_CODE_SSP_RX_START_RECEIVE	    (0xDA)
+#define MPI2_SASPHY3_EVENT_CODE_SATA_RX_START_RECEIVE	    (0xDB)
+#define MPI2_SASPHY3_EVENT_CODE_SMP_RX_START_RECEIVE	    (0xDC)
+
+
+/*values for the CounterType field */
+#define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING                  (0x00)
+#define MPI2_SASPHY3_COUNTER_TYPE_SATURATING                (0x01)
+#define MPI2_SASPHY3_COUNTER_TYPE_PEAK_VALUE                (0x02)
+
+/*values for the TimeUnits field */
+#define MPI2_SASPHY3_TIME_UNITS_10_MICROSECONDS             (0x00)
+#define MPI2_SASPHY3_TIME_UNITS_100_MICROSECONDS            (0x01)
+#define MPI2_SASPHY3_TIME_UNITS_1_MILLISECOND               (0x02)
+#define MPI2_SASPHY3_TIME_UNITS_10_MILLISECONDS             (0x03)
+
+/*values for the ThresholdFlags field */
+#define MPI2_SASPHY3_TFLAGS_PHY_RESET                       (0x0002)
+#define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY                    (0x0001)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhyEvents at runtime.
+ */
+#ifndef MPI2_SASPHY3_PHY_EVENT_MAX
+#define MPI2_SASPHY3_PHY_EVENT_MAX      (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                     /*0x00 */
+	U32
+		Reserved1;                  /*0x08 */
+	U8
+		NumPhyEvents;               /*0x0C */
+	U8
+		Reserved2;                  /*0x0D */
+	U16
+		Reserved3;                  /*0x0E */
+	MPI2_SASPHY3_PHY_EVENT_CONFIG
+		PhyEventConfig[MPI2_SASPHY3_PHY_EVENT_MAX]; /*0x10 */
+} MPI2_CONFIG_PAGE_SAS_PHY_3,
+	*PTR_MPI2_CONFIG_PAGE_SAS_PHY_3,
+	Mpi2SasPhyPage3_t, *pMpi2SasPhyPage3_t;
+
+#define MPI2_SASPHY3_PAGEVERSION            (0x00)
+
+
+/*SAS PHY Page 4 */
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_4 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                     /*0x00 */
+	U16
+		Reserved1;                  /*0x08 */
+	U8
+		Reserved2;                  /*0x0A */
+	U8
+		Flags;                      /*0x0B */
+	U8
+		InitialFrame[28];           /*0x0C */
+} MPI2_CONFIG_PAGE_SAS_PHY_4,
+	*PTR_MPI2_CONFIG_PAGE_SAS_PHY_4,
+	Mpi2SasPhyPage4_t, *pMpi2SasPhyPage4_t;
+
+#define MPI2_SASPHY4_PAGEVERSION            (0x00)
+
+/*values for the Flags field */
+#define MPI2_SASPHY4_FLAGS_FRAME_VALID        (0x02)
+#define MPI2_SASPHY4_FLAGS_SATA_FRAME         (0x01)
+
+
+
+
+/****************************************************************************
+*  SAS Port Config Pages
+****************************************************************************/
+
+/*SAS Port Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                     /*0x00 */
+	U8
+		PortNumber;                 /*0x08 */
+	U8
+		PhysicalPort;               /*0x09 */
+	U8
+		PortWidth;                  /*0x0A */
+	U8
+		PhysicalPortWidth;          /*0x0B */
+	U8
+		ZoneGroup;                  /*0x0C */
+	U8
+		Reserved1;                  /*0x0D */
+	U16
+		Reserved2;                  /*0x0E */
+	U64
+		SASAddress;                 /*0x10 */
+	U32
+		DeviceInfo;                 /*0x18 */
+	U32
+		Reserved3;                  /*0x1C */
+	U32
+		Reserved4;                  /*0x20 */
+} MPI2_CONFIG_PAGE_SAS_PORT_0,
+	*PTR_MPI2_CONFIG_PAGE_SAS_PORT_0,
+	Mpi2SasPortPage0_t, *pMpi2SasPortPage0_t;
+
+#define MPI2_SASPORT0_PAGEVERSION           (0x00)
+
+/*see mpi2_sas.h for values for SAS Port Page 0 DeviceInfo values */
+
+
+/****************************************************************************
+*  SAS Enclosure Config Pages
+****************************************************************************/
+
+/*SAS Enclosure Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER	Header;	/*0x00 */
+	U32	Reserved1;			/*0x08 */
+	U64	EnclosureLogicalID;		/*0x0C */
+	U16	Flags;				/*0x14 */
+	U16	EnclosureHandle;		/*0x16 */
+	U16	NumSlots;			/*0x18 */
+	U16	StartSlot;			/*0x1A */
+	U8	ChassisSlot;			/*0x1C */
+	U8	EnclosureLevel;			/*0x1D */
+	U16	SEPDevHandle;			/*0x1E */
+	U8	OEMRD;				/*0x20 */
+	U8	Reserved1a;			/*0x21 */
+	U16	Reserved2;			/*0x22 */
+	U32	Reserved3;			/*0x24 */
+} MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
+	*PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
+	Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t,
+	MPI26_CONFIG_PAGE_ENCLOSURE_0,
+	*PTR_MPI26_CONFIG_PAGE_ENCLOSURE_0,
+	Mpi26EnclosurePage0_t, *pMpi26EnclosurePage0_t;
+
+#define MPI2_SASENCLOSURE0_PAGEVERSION      (0x04)
+
+/*values for SAS Enclosure Page 0 Flags field */
+#define MPI26_SAS_ENCLS0_FLAGS_OEMRD_VALID          (0x0080)
+#define MPI26_SAS_ENCLS0_FLAGS_OEMRD_COLLECTING     (0x0040)
+#define MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID    (0x0020)
+#define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID      (0x0010)
+#define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK              (0x000F)
+#define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN           (0x0000)
+#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES           (0x0001)
+#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO         (0x0002)
+#define MPI2_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO         (0x0003)
+#define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE     (0x0004)
+#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO          (0x0005)
+
+#define MPI26_ENCLOSURE0_PAGEVERSION        (0x04)
+
+/*Values for Enclosure Page 0 Flags field */
+#define MPI26_ENCLS0_FLAGS_OEMRD_VALID              (0x0080)
+#define MPI26_ENCLS0_FLAGS_OEMRD_COLLECTING         (0x0040)
+#define MPI26_ENCLS0_FLAGS_CHASSIS_SLOT_VALID       (0x0020)
+#define MPI26_ENCLS0_FLAGS_ENCL_LEVEL_VALID         (0x0010)
+#define MPI26_ENCLS0_FLAGS_MNG_MASK                 (0x000F)
+#define MPI26_ENCLS0_FLAGS_MNG_UNKNOWN              (0x0000)
+#define MPI26_ENCLS0_FLAGS_MNG_IOC_SES              (0x0001)
+#define MPI26_ENCLS0_FLAGS_MNG_IOC_SGPIO            (0x0002)
+#define MPI26_ENCLS0_FLAGS_MNG_EXP_SGPIO            (0x0003)
+#define MPI26_ENCLS0_FLAGS_MNG_SES_ENCLOSURE        (0x0004)
+#define MPI26_ENCLS0_FLAGS_MNG_IOC_GPIO             (0x0005)
+
+/****************************************************************************
+*  Log Config Page
+****************************************************************************/
+
+/*Log Page 0 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumLogEntries at runtime.
+ */
+#ifndef MPI2_LOG_0_NUM_LOG_ENTRIES
+#define MPI2_LOG_0_NUM_LOG_ENTRIES          (1)
+#endif
+
+#define MPI2_LOG_0_LOG_DATA_LENGTH          (0x1C)
+
+typedef struct _MPI2_LOG_0_ENTRY {
+	U64         TimeStamp;                      /*0x00 */
+	U32         Reserved1;                      /*0x08 */
+	U16         LogSequence;                    /*0x0C */
+	U16         LogEntryQualifier;              /*0x0E */
+	U8          VP_ID;                          /*0x10 */
+	U8          VF_ID;                          /*0x11 */
+	U16         Reserved2;                      /*0x12 */
+	U8
+		LogData[MPI2_LOG_0_LOG_DATA_LENGTH];/*0x14 */
+} MPI2_LOG_0_ENTRY, *PTR_MPI2_LOG_0_ENTRY,
+	Mpi2Log0Entry_t, *pMpi2Log0Entry_t;
+
+/*values for Log Page 0 LogEntry LogEntryQualifier field */
+#define MPI2_LOG_0_ENTRY_QUAL_ENTRY_UNUSED          (0x0000)
+#define MPI2_LOG_0_ENTRY_QUAL_POWER_ON_RESET        (0x0001)
+#define MPI2_LOG_0_ENTRY_QUAL_TIMESTAMP_UPDATE      (0x0002)
+#define MPI2_LOG_0_ENTRY_QUAL_MIN_IMPLEMENT_SPEC    (0x8000)
+#define MPI2_LOG_0_ENTRY_QUAL_MAX_IMPLEMENT_SPEC    (0xFFFF)
+
+typedef struct _MPI2_CONFIG_PAGE_LOG_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;       /*0x00 */
+	U32                                 Reserved1;    /*0x08 */
+	U32                                 Reserved2;    /*0x0C */
+	U16                                 NumLogEntries;/*0x10 */
+	U16                                 Reserved3;    /*0x12 */
+	MPI2_LOG_0_ENTRY
+		LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /*0x14 */
+} MPI2_CONFIG_PAGE_LOG_0, *PTR_MPI2_CONFIG_PAGE_LOG_0,
+	Mpi2LogPage0_t, *pMpi2LogPage0_t;
+
+#define MPI2_LOG_0_PAGEVERSION              (0x02)
+
+
+/****************************************************************************
+*  RAID Config Page
+****************************************************************************/
+
+/*RAID Page 0 */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumElements at runtime.
+ */
+#ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS
+#define MPI2_RAIDCONFIG0_MAX_ELEMENTS       (1)
+#endif
+
+typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT {
+	U16                     ElementFlags;             /*0x00 */
+	U16                     VolDevHandle;             /*0x02 */
+	U8                      HotSparePool;             /*0x04 */
+	U8                      PhysDiskNum;              /*0x05 */
+	U16                     PhysDiskDevHandle;        /*0x06 */
+} MPI2_RAIDCONFIG0_CONFIG_ELEMENT,
+	*PTR_MPI2_RAIDCONFIG0_CONFIG_ELEMENT,
+	Mpi2RaidConfig0ConfigElement_t,
+	*pMpi2RaidConfig0ConfigElement_t;
+
+/*values for the ElementFlags field */
+#define MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE       (0x000F)
+#define MPI2_RAIDCONFIG0_EFLAGS_VOLUME_ELEMENT          (0x0000)
+#define MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT   (0x0001)
+#define MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT       (0x0002)
+#define MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT             (0x0003)
+
+
+typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;         /*0x00 */
+	U8                                  NumHotSpares;   /*0x08 */
+	U8                                  NumPhysDisks;   /*0x09 */
+	U8                                  NumVolumes;     /*0x0A */
+	U8                                  ConfigNum;      /*0x0B */
+	U32                                 Flags;          /*0x0C */
+	U8                                  ConfigGUID[24]; /*0x10 */
+	U32                                 Reserved1;      /*0x28 */
+	U8                                  NumElements;    /*0x2C */
+	U8                                  Reserved2;      /*0x2D */
+	U16                                 Reserved3;      /*0x2E */
+	MPI2_RAIDCONFIG0_CONFIG_ELEMENT
+		ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /*0x30 */
+} MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
+	*PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
+	Mpi2RaidConfigurationPage0_t,
+	*pMpi2RaidConfigurationPage0_t;
+
+#define MPI2_RAIDCONFIG0_PAGEVERSION            (0x00)
+
+/*values for RAID Configuration Page 0 Flags field */
+#define MPI2_RAIDCONFIG0_FLAG_FOREIGN_CONFIG        (0x00000001)
+
+
+/****************************************************************************
+*  Driver Persistent Mapping Config Pages
+****************************************************************************/
+
+/*Driver Persistent Mapping Page 0 */
+
+typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY {
+	U64	PhysicalIdentifier;         /*0x00 */
+	U16	MappingInformation;         /*0x08 */
+	U16	DeviceIndex;                /*0x0A */
+	U32	PhysicalBitsMapping;        /*0x0C */
+	U32	Reserved1;                  /*0x10 */
+} MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY,
+	*PTR_MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY,
+	Mpi2DriverMap0Entry_t, *pMpi2DriverMap0Entry_t;
+
+typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header; /*0x00 */
+	MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY  Entry;  /*0x08 */
+} MPI2_CONFIG_PAGE_DRIVER_MAPPING_0,
+	*PTR_MPI2_CONFIG_PAGE_DRIVER_MAPPING_0,
+	Mpi2DriverMappingPage0_t, *pMpi2DriverMappingPage0_t;
+
+#define MPI2_DRIVERMAPPING0_PAGEVERSION         (0x00)
+
+/*values for Driver Persistent Mapping Page 0 MappingInformation field */
+#define MPI2_DRVMAP0_MAPINFO_SLOT_MASK              (0x07F0)
+#define MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT             (4)
+#define MPI2_DRVMAP0_MAPINFO_MISSING_MASK           (0x000F)
+
+
+/****************************************************************************
+*  Ethernet Config Pages
+****************************************************************************/
+
+/*Ethernet Page 0 */
+
+/*IP address (union of IPv4 and IPv6) */
+typedef union _MPI2_ETHERNET_IP_ADDR {
+	U32     IPv4Addr;
+	U32     IPv6Addr[4];
+} MPI2_ETHERNET_IP_ADDR, *PTR_MPI2_ETHERNET_IP_ADDR,
+	Mpi2EthernetIpAddr_t, *pMpi2EthernetIpAddr_t;
+
+#define MPI2_ETHERNET_HOST_NAME_LENGTH          (32)
+
+typedef struct _MPI2_CONFIG_PAGE_ETHERNET_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;          /*0x00 */
+	U8                                  NumInterfaces;   /*0x08 */
+	U8                                  Reserved0;       /*0x09 */
+	U16                                 Reserved1;       /*0x0A */
+	U32                                 Status;          /*0x0C */
+	U8                                  MediaState;      /*0x10 */
+	U8                                  Reserved2;       /*0x11 */
+	U16                                 Reserved3;       /*0x12 */
+	U8                                  MacAddress[6];   /*0x14 */
+	U8                                  Reserved4;       /*0x1A */
+	U8                                  Reserved5;       /*0x1B */
+	MPI2_ETHERNET_IP_ADDR               IpAddress;       /*0x1C */
+	MPI2_ETHERNET_IP_ADDR               SubnetMask;      /*0x2C */
+	MPI2_ETHERNET_IP_ADDR               GatewayIpAddress;/*0x3C */
+	MPI2_ETHERNET_IP_ADDR               DNS1IpAddress;   /*0x4C */
+	MPI2_ETHERNET_IP_ADDR               DNS2IpAddress;   /*0x5C */
+	MPI2_ETHERNET_IP_ADDR               DhcpIpAddress;   /*0x6C */
+	U8
+		HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/*0x7C */
+} MPI2_CONFIG_PAGE_ETHERNET_0,
+	*PTR_MPI2_CONFIG_PAGE_ETHERNET_0,
+	Mpi2EthernetPage0_t, *pMpi2EthernetPage0_t;
+
+#define MPI2_ETHERNETPAGE0_PAGEVERSION   (0x00)
+
+/*values for Ethernet Page 0 Status field */
+#define MPI2_ETHPG0_STATUS_IPV6_CAPABLE             (0x80000000)
+#define MPI2_ETHPG0_STATUS_IPV4_CAPABLE             (0x40000000)
+#define MPI2_ETHPG0_STATUS_CONSOLE_CONNECTED        (0x20000000)
+#define MPI2_ETHPG0_STATUS_DEFAULT_IF               (0x00000100)
+#define MPI2_ETHPG0_STATUS_FW_DWNLD_ENABLED         (0x00000080)
+#define MPI2_ETHPG0_STATUS_TELNET_ENABLED           (0x00000040)
+#define MPI2_ETHPG0_STATUS_SSH2_ENABLED             (0x00000020)
+#define MPI2_ETHPG0_STATUS_DHCP_CLIENT_ENABLED      (0x00000010)
+#define MPI2_ETHPG0_STATUS_IPV6_ENABLED             (0x00000008)
+#define MPI2_ETHPG0_STATUS_IPV4_ENABLED             (0x00000004)
+#define MPI2_ETHPG0_STATUS_IPV6_ADDRESSES           (0x00000002)
+#define MPI2_ETHPG0_STATUS_ETH_IF_ENABLED           (0x00000001)
+
+/*values for Ethernet Page 0 MediaState field */
+#define MPI2_ETHPG0_MS_DUPLEX_MASK                  (0x80)
+#define MPI2_ETHPG0_MS_HALF_DUPLEX                  (0x00)
+#define MPI2_ETHPG0_MS_FULL_DUPLEX                  (0x80)
+
+#define MPI2_ETHPG0_MS_CONNECT_SPEED_MASK           (0x07)
+#define MPI2_ETHPG0_MS_NOT_CONNECTED                (0x00)
+#define MPI2_ETHPG0_MS_10MBIT                       (0x01)
+#define MPI2_ETHPG0_MS_100MBIT                      (0x02)
+#define MPI2_ETHPG0_MS_1GBIT                        (0x03)
+
+
+/*Ethernet Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_ETHERNET_1 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                 /*0x00 */
+	U32
+		Reserved0;              /*0x08 */
+	U32
+		Flags;                  /*0x0C */
+	U8
+		MediaState;             /*0x10 */
+	U8
+		Reserved1;              /*0x11 */
+	U16
+		Reserved2;              /*0x12 */
+	U8
+		MacAddress[6];          /*0x14 */
+	U8
+		Reserved3;              /*0x1A */
+	U8
+		Reserved4;              /*0x1B */
+	MPI2_ETHERNET_IP_ADDR
+		StaticIpAddress;        /*0x1C */
+	MPI2_ETHERNET_IP_ADDR
+		StaticSubnetMask;       /*0x2C */
+	MPI2_ETHERNET_IP_ADDR
+		StaticGatewayIpAddress; /*0x3C */
+	MPI2_ETHERNET_IP_ADDR
+		StaticDNS1IpAddress;    /*0x4C */
+	MPI2_ETHERNET_IP_ADDR
+		StaticDNS2IpAddress;    /*0x5C */
+	U32
+		Reserved5;              /*0x6C */
+	U32
+		Reserved6;              /*0x70 */
+	U32
+		Reserved7;              /*0x74 */
+	U32
+		Reserved8;              /*0x78 */
+	U8
+		HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/*0x7C */
+} MPI2_CONFIG_PAGE_ETHERNET_1,
+	*PTR_MPI2_CONFIG_PAGE_ETHERNET_1,
+	Mpi2EthernetPage1_t, *pMpi2EthernetPage1_t;
+
+#define MPI2_ETHERNETPAGE1_PAGEVERSION   (0x00)
+
+/*values for Ethernet Page 1 Flags field */
+#define MPI2_ETHPG1_FLAG_SET_DEFAULT_IF             (0x00000100)
+#define MPI2_ETHPG1_FLAG_ENABLE_FW_DOWNLOAD         (0x00000080)
+#define MPI2_ETHPG1_FLAG_ENABLE_TELNET              (0x00000040)
+#define MPI2_ETHPG1_FLAG_ENABLE_SSH2                (0x00000020)
+#define MPI2_ETHPG1_FLAG_ENABLE_DHCP_CLIENT         (0x00000010)
+#define MPI2_ETHPG1_FLAG_ENABLE_IPV6                (0x00000008)
+#define MPI2_ETHPG1_FLAG_ENABLE_IPV4                (0x00000004)
+#define MPI2_ETHPG1_FLAG_USE_IPV6_ADDRESSES         (0x00000002)
+#define MPI2_ETHPG1_FLAG_ENABLE_ETH_IF              (0x00000001)
+
+/*values for Ethernet Page 1 MediaState field */
+#define MPI2_ETHPG1_MS_DUPLEX_MASK                  (0x80)
+#define MPI2_ETHPG1_MS_HALF_DUPLEX                  (0x00)
+#define MPI2_ETHPG1_MS_FULL_DUPLEX                  (0x80)
+
+#define MPI2_ETHPG1_MS_DATA_RATE_MASK               (0x07)
+#define MPI2_ETHPG1_MS_DATA_RATE_AUTO               (0x00)
+#define MPI2_ETHPG1_MS_DATA_RATE_10MBIT             (0x01)
+#define MPI2_ETHPG1_MS_DATA_RATE_100MBIT            (0x02)
+#define MPI2_ETHPG1_MS_DATA_RATE_1GBIT              (0x03)
+
+
+/****************************************************************************
+*  Extended Manufacturing Config Pages
+****************************************************************************/
+
+/*
+ *Generic structure to use for product-specific extended manufacturing pages
+ *(currently Extended Manufacturing Page 40 through Extended Manufacturing
+ *Page 60).
+ */
+
+typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER
+		Header;                 /*0x00 */
+	U32
+		ProductSpecificInfo;    /*0x08 */
+} MPI2_CONFIG_PAGE_EXT_MAN_PS,
+	*PTR_MPI2_CONFIG_PAGE_EXT_MAN_PS,
+	Mpi2ExtManufacturingPagePS_t,
+	*pMpi2ExtManufacturingPagePS_t;
+
+/*PageVersion should be provided by product-specific code */
+
+
+
+/****************************************************************************
+*  values for fields used by several types of PCIe Config Pages
+****************************************************************************/
+
+/*values for NegotiatedLinkRates fields */
+#define MPI26_PCIE_NEG_LINK_RATE_MASK_PHYSICAL          (0x0F)
+/*link rates used for Negotiated Physical Link Rate */
+#define MPI26_PCIE_NEG_LINK_RATE_UNKNOWN                (0x00)
+#define MPI26_PCIE_NEG_LINK_RATE_PHY_DISABLED           (0x01)
+#define MPI26_PCIE_NEG_LINK_RATE_2_5                    (0x02)
+#define MPI26_PCIE_NEG_LINK_RATE_5_0                    (0x03)
+#define MPI26_PCIE_NEG_LINK_RATE_8_0                    (0x04)
+#define MPI26_PCIE_NEG_LINK_RATE_16_0                   (0x05)
+
+
+/****************************************************************************
+*  PCIe IO Unit Config Pages (MPI v2.6 and later)
+****************************************************************************/
+
+/*PCIe IO Unit Page 0 */
+
+typedef struct _MPI26_PCIE_IO_UNIT0_PHY_DATA {
+	U8	Link;                   /*0x00 */
+	U8	LinkFlags;              /*0x01 */
+	U8	PhyFlags;               /*0x02 */
+	U8	NegotiatedLinkRate;     /*0x03 */
+	U32	ControllerPhyDeviceInfo;/*0x04 */
+	U16	AttachedDevHandle;      /*0x08 */
+	U16	ControllerDevHandle;    /*0x0A */
+	U32	EnumerationStatus;      /*0x0C */
+	U32	Reserved1;              /*0x10 */
+} MPI26_PCIE_IO_UNIT0_PHY_DATA,
+	*PTR_MPI26_PCIE_IO_UNIT0_PHY_DATA,
+	Mpi26PCIeIOUnit0PhyData_t, *pMpi26PCIeIOUnit0PhyData_t;
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI26_PCIE_IOUNIT0_PHY_MAX
+#define MPI26_PCIE_IOUNIT0_PHY_MAX      (1)
+#endif
+
+typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER	Header; /*0x00 */
+	U32	Reserved1;                              /*0x08 */
+	U8	NumPhys;                                /*0x0C */
+	U8	InitStatus;                             /*0x0D */
+	U16	Reserved3;                              /*0x0E */
+	MPI26_PCIE_IO_UNIT0_PHY_DATA
+		PhyData[MPI26_PCIE_IOUNIT0_PHY_MAX];    /*0x10 */
+} MPI26_CONFIG_PAGE_PIOUNIT_0,
+	*PTR_MPI26_CONFIG_PAGE_PIOUNIT_0,
+	Mpi26PCIeIOUnitPage0_t, *pMpi26PCIeIOUnitPage0_t;
+
+#define MPI26_PCIEIOUNITPAGE0_PAGEVERSION                   (0x00)
+
+/*values for PCIe IO Unit Page 0 LinkFlags */
+#define MPI26_PCIEIOUNIT0_LINKFLAGS_ENUMERATION_IN_PROGRESS (0x08)
+
+/*values for PCIe IO Unit Page 0 PhyFlags */
+#define MPI26_PCIEIOUNIT0_PHYFLAGS_PHY_DISABLED             (0x08)
+
+/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
+
+/*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo
+ *values
+ */
+
+/*values for PCIe IO Unit Page 0 EnumerationStatus */
+#define MPI26_PCIEIOUNIT0_ES_MAX_SWITCHES_EXCEEDED          (0x40000000)
+#define MPI26_PCIEIOUNIT0_ES_MAX_DEVICES_EXCEEDED           (0x20000000)
+
+
+/*PCIe IO Unit Page 1 */
+
+typedef struct _MPI26_PCIE_IO_UNIT1_PHY_DATA {
+	U8	Link;                       /*0x00 */
+	U8	LinkFlags;                  /*0x01 */
+	U8	PhyFlags;                   /*0x02 */
+	U8	MaxMinLinkRate;             /*0x03 */
+	U32	ControllerPhyDeviceInfo;    /*0x04 */
+	U32	Reserved1;                  /*0x08 */
+} MPI26_PCIE_IO_UNIT1_PHY_DATA,
+	*PTR_MPI26_PCIE_IO_UNIT1_PHY_DATA,
+	Mpi26PCIeIOUnit1PhyData_t, *pMpi26PCIeIOUnit1PhyData_t;
+
+/*values for LinkFlags */
+#define MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SEPARATE_REFCLK     (0x00)
+#define MPI26_PCIEIOUNIT1_LINKFLAGS_SRIS_EN                 (0x01)
+#define MPI26_PCIEIOUNIT1_LINKFLAGS_SRNS_EN                 (0x02)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumPhys at runtime.
+ */
+#ifndef MPI26_PCIE_IOUNIT1_PHY_MAX
+#define MPI26_PCIE_IOUNIT1_PHY_MAX      (1)
+#endif
+
+typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_1 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER	Header;	/*0x00 */
+	U16	ControlFlags;                       /*0x08 */
+	U16	Reserved;                           /*0x0A */
+	U16	AdditionalControlFlags;             /*0x0C */
+	U16	NVMeMaxQueueDepth;                  /*0x0E */
+	U8	NumPhys;                            /*0x10 */
+	U8	DMDReportPCIe;                      /*0x11 */
+	U16	Reserved2;                          /*0x12 */
+	MPI26_PCIE_IO_UNIT1_PHY_DATA
+		PhyData[MPI26_PCIE_IOUNIT1_PHY_MAX];/*0x14 */
+} MPI26_CONFIG_PAGE_PIOUNIT_1,
+	*PTR_MPI26_CONFIG_PAGE_PIOUNIT_1,
+	Mpi26PCIeIOUnitPage1_t, *pMpi26PCIeIOUnitPage1_t;
+
+#define MPI26_PCIEIOUNITPAGE1_PAGEVERSION   (0x00)
+
+/*values for PCIe IO Unit Page 1 PhyFlags */
+#define MPI26_PCIEIOUNIT1_PHYFLAGS_PHY_DISABLE                      (0x08)
+#define MPI26_PCIEIOUNIT1_PHYFLAGS_ENDPOINT_ONLY                    (0x01)
+
+/*values for PCIe IO Unit Page 1 MaxMinLinkRate */
+#define MPI26_PCIEIOUNIT1_MAX_RATE_MASK                             (0xF0)
+#define MPI26_PCIEIOUNIT1_MAX_RATE_SHIFT                            (4)
+#define MPI26_PCIEIOUNIT1_MAX_RATE_2_5                              (0x20)
+#define MPI26_PCIEIOUNIT1_MAX_RATE_5_0                              (0x30)
+#define MPI26_PCIEIOUNIT1_MAX_RATE_8_0                              (0x40)
+#define MPI26_PCIEIOUNIT1_MAX_RATE_16_0                             (0x50)
+
+/*values for PCIe IO Unit Page 1 DMDReportPCIe */
+#define MPI26_PCIEIOUNIT1_DMDRPT_UNIT_MASK                          (0x80)
+#define MPI26_PCIEIOUNIT1_DMDRPT_UNIT_1_SEC                         (0x00)
+#define MPI26_PCIEIOUNIT1_DMDRPT_UNIT_16_SEC                        (0x80)
+#define MPI26_PCIEIOUNIT1_DMDRPT_DELAY_TIME_MASK                    (0x7F)
+
+/*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo
+ *values
+ */
+
+
+/****************************************************************************
+*  PCIe Switch Config Pages (MPI v2.6 and later)
+****************************************************************************/
+
+/*PCIe Switch Page 0 */
+
+typedef struct _MPI26_CONFIG_PAGE_PSWITCH_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER	Header;	/*0x00 */
+	U8	PhysicalPort;               /*0x08 */
+	U8	Reserved1;                  /*0x09 */
+	U16	Reserved2;                  /*0x0A */
+	U16	DevHandle;                  /*0x0C */
+	U16	ParentDevHandle;            /*0x0E */
+	U8	NumPorts;                   /*0x10 */
+	U8	PCIeLevel;                  /*0x11 */
+	U16	Reserved3;                  /*0x12 */
+	U32	Reserved4;                  /*0x14 */
+	U32	Reserved5;                  /*0x18 */
+	U32	Reserved6;                  /*0x1C */
+} MPI26_CONFIG_PAGE_PSWITCH_0, *PTR_MPI26_CONFIG_PAGE_PSWITCH_0,
+	Mpi26PCIeSwitchPage0_t, *pMpi26PCIeSwitchPage0_t;
+
+#define MPI26_PCIESWITCH0_PAGEVERSION       (0x00)
+
+
+/*PCIe Switch Page 1 */
+
+typedef struct _MPI26_CONFIG_PAGE_PSWITCH_1 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER	Header;	/*0x00 */
+	U8	PhysicalPort;               /*0x08 */
+	U8	Reserved1;                  /*0x09 */
+	U16	Reserved2;                  /*0x0A */
+	U8	NumPorts;                   /*0x0C */
+	U8	PortNum;                    /*0x0D */
+	U16	AttachedDevHandle;          /*0x0E */
+	U16	SwitchDevHandle;            /*0x10 */
+	U8	NegotiatedPortWidth;        /*0x12 */
+	U8	NegotiatedLinkRate;         /*0x13 */
+	U32	Reserved4;                  /*0x14 */
+	U32	Reserved5;                  /*0x18 */
+} MPI26_CONFIG_PAGE_PSWITCH_1, *PTR_MPI26_CONFIG_PAGE_PSWITCH_1,
+	Mpi26PCIeSwitchPage1_t, *pMpi26PCIeSwitchPage1_t;
+
+#define MPI26_PCIESWITCH1_PAGEVERSION       (0x00)
+
+/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
+
+/* defines for the Flags field */
+#define MPI26_PCIESWITCH1_2_RETIMER_PRESENCE         (0x0002)
+#define MPI26_PCIESWITCH1_RETIMER_PRESENCE           (0x0001)
+
+/****************************************************************************
+*  PCIe Device Config Pages (MPI v2.6 and later)
+****************************************************************************/
+
+/*PCIe Device Page 0 */
+
+typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER	Header;	/*0x00 */
+	U16	Slot;                   /*0x08 */
+	U16	EnclosureHandle;        /*0x0A */
+	U64	WWID;                   /*0x0C */
+	U16	ParentDevHandle;        /*0x14 */
+	U8	PortNum;                /*0x16 */
+	U8	AccessStatus;           /*0x17 */
+	U16	DevHandle;              /*0x18 */
+	U8	PhysicalPort;           /*0x1A */
+	U8	Reserved1;              /*0x1B */
+	U32	DeviceInfo;             /*0x1C */
+	U32	Flags;                  /*0x20 */
+	U8	SupportedLinkRates;     /*0x24 */
+	U8	MaxPortWidth;           /*0x25 */
+	U8	NegotiatedPortWidth;    /*0x26 */
+	U8	NegotiatedLinkRate;     /*0x27 */
+	U8	EnclosureLevel;         /*0x28 */
+	U8	Reserved2;              /*0x29 */
+	U16	Reserved3;              /*0x2A */
+	U8	ConnectorName[4];       /*0x2C */
+	U32	Reserved4;              /*0x30 */
+	U32	Reserved5;              /*0x34 */
+} MPI26_CONFIG_PAGE_PCIEDEV_0, *PTR_MPI26_CONFIG_PAGE_PCIEDEV_0,
+	Mpi26PCIeDevicePage0_t, *pMpi26PCIeDevicePage0_t;
+
+#define MPI26_PCIEDEVICE0_PAGEVERSION       (0x01)
+
+/*values for PCIe Device Page 0 AccessStatus field */
+#define MPI26_PCIEDEV0_ASTATUS_NO_ERRORS                    (0x00)
+#define MPI26_PCIEDEV0_ASTATUS_NEEDS_INITIALIZATION         (0x04)
+#define MPI26_PCIEDEV0_ASTATUS_CAPABILITY_FAILED            (0x02)
+#define MPI26_PCIEDEV0_ASTATUS_DEVICE_BLOCKED               (0x07)
+#define MPI26_PCIEDEV0_ASTATUS_MEMORY_SPACE_ACCESS_FAILED   (0x08)
+#define MPI26_PCIEDEV0_ASTATUS_UNSUPPORTED_DEVICE           (0x09)
+#define MPI26_PCIEDEV0_ASTATUS_MSIX_REQUIRED                (0x0A)
+#define MPI26_PCIEDEV0_ASTATUS_UNKNOWN                      (0x10)
+
+#define MPI26_PCIEDEV0_ASTATUS_NVME_READY_TIMEOUT           (0x30)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_DEVCFG_UNSUPPORTED      (0x31)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_IDENTIFY_FAILED         (0x32)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_QCONFIG_FAILED          (0x33)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_QCREATION_FAILED        (0x34)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_EVENTCFG_FAILED         (0x35)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_GET_FEATURE_STAT_FAILED (0x36)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_IDLE_TIMEOUT            (0x37)
+#define MPI26_PCIEDEV0_ASTATUS_NVME_FAILURE_STATUS          (0x38)
+
+#define MPI26_PCIEDEV0_ASTATUS_INIT_FAIL_MAX                (0x3F)
+
+/*see mpi2_pci.h for the MPI26_PCIE_DEVINFO_ defines used for the DeviceInfo
+ *field
+ */
+
+/*values for PCIe Device Page 0 Flags field*/
+#define MPI26_PCIEDEV0_FLAGS_2_RETIMER_PRESENCE             (0x00020000)
+#define MPI26_PCIEDEV0_FLAGS_RETIMER_PRESENCE               (0x00010000)
+#define MPI26_PCIEDEV0_FLAGS_UNAUTHORIZED_DEVICE            (0x00008000)
+#define MPI26_PCIEDEV0_FLAGS_ENABLED_FAST_PATH              (0x00004000)
+#define MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE              (0x00002000)
+#define MPI26_PCIEDEV0_FLAGS_ASYNCHRONOUS_NOTIFICATION      (0x00000400)
+#define MPI26_PCIEDEV0_FLAGS_ATA_SW_PRESERVATION            (0x00000200)
+#define MPI26_PCIEDEV0_FLAGS_UNSUPPORTED_DEVICE             (0x00000100)
+#define MPI26_PCIEDEV0_FLAGS_ATA_48BIT_LBA_SUPPORTED        (0x00000080)
+#define MPI26_PCIEDEV0_FLAGS_ATA_SMART_SUPPORTED            (0x00000040)
+#define MPI26_PCIEDEV0_FLAGS_ATA_NCQ_SUPPORTED              (0x00000020)
+#define MPI26_PCIEDEV0_FLAGS_ATA_FUA_SUPPORTED              (0x00000010)
+#define MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID               (0x00000002)
+#define MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT                 (0x00000001)
+
+/* values for PCIe Device Page 0 SupportedLinkRates field */
+#define MPI26_PCIEDEV0_LINK_RATE_16_0_SUPPORTED             (0x08)
+#define MPI26_PCIEDEV0_LINK_RATE_8_0_SUPPORTED              (0x04)
+#define MPI26_PCIEDEV0_LINK_RATE_5_0_SUPPORTED              (0x02)
+#define MPI26_PCIEDEV0_LINK_RATE_2_5_SUPPORTED              (0x01)
+
+/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
+
+
+/*PCIe Device Page 2 */
+
+typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_2 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER	Header;	/*0x00 */
+	U16	DevHandle;		/*0x08 */
+	U8	ControllerResetTO;		/* 0x0A */
+	U8	Reserved1;		/* 0x0B */
+	U32	MaximumDataTransferSize;	/*0x0C */
+	U32	Capabilities;		/*0x10 */
+	U16	NOIOB;		/* 0x14 */
+	U16     ShutdownLatency;        /* 0x16 */
+	U16     VendorID;               /* 0x18 */
+	U16     DeviceID;               /* 0x1A */
+	U16     SubsystemVendorID;      /* 0x1C */
+	U16     SubsystemID;            /* 0x1E */
+	U8      RevisionID;             /* 0x20 */
+	U8      Reserved21[3];          /* 0x21 */
+} MPI26_CONFIG_PAGE_PCIEDEV_2, *PTR_MPI26_CONFIG_PAGE_PCIEDEV_2,
+	Mpi26PCIeDevicePage2_t, *pMpi26PCIeDevicePage2_t;
+
+#define MPI26_PCIEDEVICE2_PAGEVERSION       (0x01)
+
+/*defines for PCIe Device Page 2 Capabilities field */
+#define MPI26_PCIEDEV2_CAP_DATA_BLK_ALIGN_AND_GRAN     (0x00000008)
+#define MPI26_PCIEDEV2_CAP_SGL_FORMAT                  (0x00000004)
+#define MPI26_PCIEDEV2_CAP_BIT_BUCKET_SUPPORT          (0x00000002)
+#define MPI26_PCIEDEV2_CAP_SGL_SUPPORT                 (0x00000001)
+
+/* Defines for the NOIOB field */
+#define MPI26_PCIEDEV2_NOIOB_UNSUPPORTED                (0x0000)
+
+/****************************************************************************
+*  PCIe Link Config Pages (MPI v2.6 and later)
+****************************************************************************/
+
+/*PCIe Link Page 1 */
+
+typedef struct _MPI26_CONFIG_PAGE_PCIELINK_1 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER	Header;	/*0x00 */
+	U8	Link;				/*0x08 */
+	U8	Reserved1;			/*0x09 */
+	U16	Reserved2;			/*0x0A */
+	U32	CorrectableErrorCount;		/*0x0C */
+	U16	NonFatalErrorCount;		/*0x10 */
+	U16	Reserved3;			/*0x12 */
+	U16	FatalErrorCount;		/*0x14 */
+	U16	Reserved4;			/*0x16 */
+} MPI26_CONFIG_PAGE_PCIELINK_1, *PTR_MPI26_CONFIG_PAGE_PCIELINK_1,
+	Mpi26PcieLinkPage1_t, *pMpi26PcieLinkPage1_t;
+
+#define MPI26_PCIELINK1_PAGEVERSION            (0x00)
+
+/*PCIe Link Page 2 */
+
+typedef struct _MPI26_PCIELINK2_LINK_EVENT {
+	U8	LinkEventCode;		/*0x00 */
+	U8	Reserved1;		/*0x01 */
+	U16	Reserved2;		/*0x02 */
+	U32	LinkEventInfo;		/*0x04 */
+} MPI26_PCIELINK2_LINK_EVENT, *PTR_MPI26_PCIELINK2_LINK_EVENT,
+	Mpi26PcieLink2LinkEvent_t, *pMpi26PcieLink2LinkEvent_t;
+
+/*use MPI26_PCIELINK3_EVTCODE_ for the LinkEventCode field */
+
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumLinkEvents at runtime.
+ */
+#ifndef MPI26_PCIELINK2_LINK_EVENT_MAX
+#define MPI26_PCIELINK2_LINK_EVENT_MAX      (1)
+#endif
+
+typedef struct _MPI26_CONFIG_PAGE_PCIELINK_2 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER	Header;	/*0x00 */
+	U8	Link;                       /*0x08 */
+	U8	Reserved1;                  /*0x09 */
+	U16	Reserved2;                  /*0x0A */
+	U8	NumLinkEvents;              /*0x0C */
+	U8	Reserved3;                  /*0x0D */
+	U16	Reserved4;                  /*0x0E */
+	MPI26_PCIELINK2_LINK_EVENT
+		LinkEvent[MPI26_PCIELINK2_LINK_EVENT_MAX];	/*0x10 */
+} MPI26_CONFIG_PAGE_PCIELINK_2, *PTR_MPI26_CONFIG_PAGE_PCIELINK_2,
+	Mpi26PcieLinkPage2_t, *pMpi26PcieLinkPage2_t;
+
+#define MPI26_PCIELINK2_PAGEVERSION            (0x00)
+
+/*PCIe Link Page 3 */
+
+typedef struct _MPI26_PCIELINK3_LINK_EVENT_CONFIG {
+	U8	LinkEventCode;      /*0x00 */
+	U8	Reserved1;          /*0x01 */
+	U16	Reserved2;          /*0x02 */
+	U8	CounterType;        /*0x04 */
+	U8	ThresholdWindow;    /*0x05 */
+	U8	TimeUnits;          /*0x06 */
+	U8	Reserved3;          /*0x07 */
+	U32	EventThreshold;     /*0x08 */
+	U16	ThresholdFlags;     /*0x0C */
+	U16	Reserved4;          /*0x0E */
+} MPI26_PCIELINK3_LINK_EVENT_CONFIG, *PTR_MPI26_PCIELINK3_LINK_EVENT_CONFIG,
+	Mpi26PcieLink3LinkEventConfig_t, *pMpi26PcieLink3LinkEventConfig_t;
+
+/*values for LinkEventCode field */
+#define MPI26_PCIELINK3_EVTCODE_NO_EVENT                              (0x00)
+#define MPI26_PCIELINK3_EVTCODE_CORRECTABLE_ERROR_RECEIVED            (0x01)
+#define MPI26_PCIELINK3_EVTCODE_NON_FATAL_ERROR_RECEIVED              (0x02)
+#define MPI26_PCIELINK3_EVTCODE_FATAL_ERROR_RECEIVED                  (0x03)
+#define MPI26_PCIELINK3_EVTCODE_DATA_LINK_ERROR_DETECTED              (0x04)
+#define MPI26_PCIELINK3_EVTCODE_TRANSACTION_LAYER_ERROR_DETECTED      (0x05)
+#define MPI26_PCIELINK3_EVTCODE_TLP_ECRC_ERROR_DETECTED               (0x06)
+#define MPI26_PCIELINK3_EVTCODE_POISONED_TLP                          (0x07)
+#define MPI26_PCIELINK3_EVTCODE_RECEIVED_NAK_DLLP                     (0x08)
+#define MPI26_PCIELINK3_EVTCODE_SENT_NAK_DLLP                         (0x09)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_RECOVERY_STATE                  (0x0A)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_RXL0S_STATE                     (0x0B)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_TXL0S_STATE                     (0x0C)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_L1_STATE                        (0x0D)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_DISABLED_STATE                  (0x0E)
+#define MPI26_PCIELINK3_EVTCODE_LTSSM_HOT_RESET_STATE                 (0x0F)
+#define MPI26_PCIELINK3_EVTCODE_SYSTEM_ERROR                          (0x10)
+#define MPI26_PCIELINK3_EVTCODE_DECODE_ERROR                          (0x11)
+#define MPI26_PCIELINK3_EVTCODE_DISPARITY_ERROR                       (0x12)
+
+/*values for the CounterType field */
+#define MPI26_PCIELINK3_COUNTER_TYPE_WRAPPING               (0x00)
+#define MPI26_PCIELINK3_COUNTER_TYPE_SATURATING             (0x01)
+#define MPI26_PCIELINK3_COUNTER_TYPE_PEAK_VALUE             (0x02)
+
+/*values for the TimeUnits field */
+#define MPI26_PCIELINK3_TM_UNITS_10_MICROSECONDS            (0x00)
+#define MPI26_PCIELINK3_TM_UNITS_100_MICROSECONDS           (0x01)
+#define MPI26_PCIELINK3_TM_UNITS_1_MILLISECOND              (0x02)
+#define MPI26_PCIELINK3_TM_UNITS_10_MILLISECONDS            (0x03)
+
+/*values for the ThresholdFlags field */
+#define MPI26_PCIELINK3_TFLAGS_EVENT_NOTIFY                 (0x0001)
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check the value returned for NumLinkEvents at runtime.
+ */
+#ifndef MPI26_PCIELINK3_LINK_EVENT_MAX
+#define MPI26_PCIELINK3_LINK_EVENT_MAX      (1)
+#endif
+
+typedef struct _MPI26_CONFIG_PAGE_PCIELINK_3 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER	Header;	/*0x00 */
+	U8	Link;                       /*0x08 */
+	U8	Reserved1;                  /*0x09 */
+	U16	Reserved2;                  /*0x0A */
+	U8	NumLinkEvents;              /*0x0C */
+	U8	Reserved3;                  /*0x0D */
+	U16	Reserved4;                  /*0x0E */
+	MPI26_PCIELINK3_LINK_EVENT_CONFIG
+		LinkEventConfig[MPI26_PCIELINK3_LINK_EVENT_MAX]; /*0x10 */
+} MPI26_CONFIG_PAGE_PCIELINK_3, *PTR_MPI26_CONFIG_PAGE_PCIELINK_3,
+	Mpi26PcieLinkPage3_t, *pMpi26PcieLinkPage3_t;
+
+#define MPI26_PCIELINK3_PAGEVERSION            (0x00)
+
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_image.h b/drivers/scsi/mpt3sas/mpi/mpi2_image.h
new file mode 100644
index 0000000000..33b9c3a6fd
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_image.h
@@ -0,0 +1,516 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2016-2020 Broadcom Limited. All rights reserved.
+ *
+ *          Name: mpi2_image.h
+ * Description: Contains definitions for firmware and other component images
+ * Creation Date: 04/02/2018
+ *       Version: 02.06.04
+ *
+ *
+ * Version History
+ * ---------------
+ *
+ * Date      Version   Description
+ * --------  --------  ------------------------------------------------------
+ * 08-01-18  02.06.00  Initial version for MPI 2.6.5.
+ * 08-14-18  02.06.01  Corrected define for MPI26_IMAGE_HEADER_SIGNATURE0_MPI26
+ * 08-28-18  02.06.02  Added MPI2_EXT_IMAGE_TYPE_RDE
+ * 09-07-18  02.06.03  Added MPI26_EVENT_PCIE_TOPO_PI_16_LANES
+ * 12-17-18  02.06.04  Addd MPI2_EXT_IMAGE_TYPE_PBLP
+ *			Shorten some defines to be compatible with DOS
+ * 06-24-19  02.06.05  Whitespace adjustments to help with identifier
+ *			checking tool.
+ * 10-02-19  02.06.06  Added MPI26_IMAGE_HEADER_SIG1_COREDUMP
+ *                     Added MPI2_FLASH_REGION_COREDUMP
+ */
+#ifndef MPI2_IMAGE_H
+#define MPI2_IMAGE_H
+
+
+/*FW Image Header */
+typedef struct _MPI2_FW_IMAGE_HEADER {
+	U32 Signature;		/*0x00 */
+	U32 Signature0;		/*0x04 */
+	U32 Signature1;		/*0x08 */
+	U32 Signature2;		/*0x0C */
+	MPI2_VERSION_UNION MPIVersion;	/*0x10 */
+	MPI2_VERSION_UNION FWVersion;	/*0x14 */
+	MPI2_VERSION_UNION NVDATAVersion;	/*0x18 */
+	MPI2_VERSION_UNION PackageVersion;	/*0x1C */
+	U16 VendorID;		/*0x20 */
+	U16 ProductID;		/*0x22 */
+	U16 ProtocolFlags;	/*0x24 */
+	U16 Reserved26;		/*0x26 */
+	U32 IOCCapabilities;	/*0x28 */
+	U32 ImageSize;		/*0x2C */
+	U32 NextImageHeaderOffset;	/*0x30 */
+	U32 Checksum;		/*0x34 */
+	U32 Reserved38;		/*0x38 */
+	U32 Reserved3C;		/*0x3C */
+	U32 Reserved40;		/*0x40 */
+	U32 Reserved44;		/*0x44 */
+	U32 Reserved48;		/*0x48 */
+	U32 Reserved4C;		/*0x4C */
+	U32 Reserved50;		/*0x50 */
+	U32 Reserved54;		/*0x54 */
+	U32 Reserved58;		/*0x58 */
+	U32 Reserved5C;		/*0x5C */
+	U32 BootFlags;		/*0x60 */
+	U32 FirmwareVersionNameWhat;	/*0x64 */
+	U8 FirmwareVersionName[32];	/*0x68 */
+	U32 VendorNameWhat;	/*0x88 */
+	U8 VendorName[32];	/*0x8C */
+	U32 PackageNameWhat;	/*0x88 */
+	U8 PackageName[32];	/*0x8C */
+	U32 ReservedD0;		/*0xD0 */
+	U32 ReservedD4;		/*0xD4 */
+	U32 ReservedD8;		/*0xD8 */
+	U32 ReservedDC;		/*0xDC */
+	U32 ReservedE0;		/*0xE0 */
+	U32 ReservedE4;		/*0xE4 */
+	U32 ReservedE8;		/*0xE8 */
+	U32 ReservedEC;		/*0xEC */
+	U32 ReservedF0;		/*0xF0 */
+	U32 ReservedF4;		/*0xF4 */
+	U32 ReservedF8;		/*0xF8 */
+	U32 ReservedFC;		/*0xFC */
+} MPI2_FW_IMAGE_HEADER, *PTR_MPI2_FW_IMAGE_HEADER,
+	Mpi2FWImageHeader_t, *pMpi2FWImageHeader_t;
+
+/*Signature field */
+#define MPI2_FW_HEADER_SIGNATURE_OFFSET         (0x00)
+#define MPI2_FW_HEADER_SIGNATURE_MASK           (0xFF000000)
+#define MPI2_FW_HEADER_SIGNATURE                (0xEA000000)
+#define MPI26_FW_HEADER_SIGNATURE               (0xEB000000)
+
+/*Signature0 field */
+#define MPI2_FW_HEADER_SIGNATURE0_OFFSET        (0x04)
+#define MPI2_FW_HEADER_SIGNATURE0               (0x5AFAA55A)
+/*Last byte is defined by architecture */
+#define MPI26_FW_HEADER_SIGNATURE0_BASE         (0x5AEAA500)
+#define MPI26_FW_HEADER_SIGNATURE0_ARC_0        (0x5A)
+#define MPI26_FW_HEADER_SIGNATURE0_ARC_1        (0x00)
+#define MPI26_FW_HEADER_SIGNATURE0_ARC_2        (0x01)
+/*legacy (0x5AEAA55A) */
+#define MPI26_FW_HEADER_SIGNATURE0_ARC_3        (0x02)
+#define MPI26_FW_HEADER_SIGNATURE0 \
+	(MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_0)
+#define MPI26_FW_HEADER_SIGNATURE0_3516 \
+	(MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_1)
+#define MPI26_FW_HEADER_SIGNATURE0_4008 \
+	(MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_3)
+
+/*Signature1 field */
+#define MPI2_FW_HEADER_SIGNATURE1_OFFSET        (0x08)
+#define MPI2_FW_HEADER_SIGNATURE1               (0xA55AFAA5)
+#define MPI26_FW_HEADER_SIGNATURE1              (0xA55AEAA5)
+
+/*Signature2 field */
+#define MPI2_FW_HEADER_SIGNATURE2_OFFSET        (0x0C)
+#define MPI2_FW_HEADER_SIGNATURE2               (0x5AA55AFA)
+#define MPI26_FW_HEADER_SIGNATURE2              (0x5AA55AEA)
+
+/*defines for using the ProductID field */
+#define MPI2_FW_HEADER_PID_TYPE_MASK            (0xF000)
+#define MPI2_FW_HEADER_PID_TYPE_SAS             (0x2000)
+
+#define MPI2_FW_HEADER_PID_PROD_MASK                    (0x0F00)
+#define MPI2_FW_HEADER_PID_PROD_A                       (0x0000)
+#define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI   (0x0200)
+#define MPI2_FW_HEADER_PID_PROD_IR_SCSI                 (0x0700)
+
+#define MPI2_FW_HEADER_PID_FAMILY_MASK          (0x00FF)
+/*SAS ProductID Family bits */
+#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS      (0x0013)
+#define MPI2_FW_HEADER_PID_FAMILY_2208_SAS      (0x0014)
+#define MPI25_FW_HEADER_PID_FAMILY_3108_SAS     (0x0021)
+#define MPI26_FW_HEADER_PID_FAMILY_3324_SAS     (0x0028)
+#define MPI26_FW_HEADER_PID_FAMILY_3516_SAS     (0x0031)
+
+/*use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */
+
+/*use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */
+
+#define MPI2_FW_HEADER_IMAGESIZE_OFFSET         (0x2C)
+#define MPI2_FW_HEADER_NEXTIMAGE_OFFSET         (0x30)
+
+#define MPI26_FW_HEADER_BOOTFLAGS_OFFSET          (0x60)
+#define MPI2_FW_HEADER_BOOTFLAGS_ISSI32M_FLAG     (0x00000001)
+#define MPI2_FW_HEADER_BOOTFLAGS_W25Q256JW_FLAG   (0x00000002)
+/*This image has a auto-discovery version of SPI */
+#define MPI2_FW_HEADER_BOOTFLAGS_AUTO_SPI_FLAG    (0x00000004)
+
+
+#define MPI2_FW_HEADER_VERNMHWAT_OFFSET         (0x64)
+
+#define MPI2_FW_HEADER_WHAT_SIGNATURE           (0x29232840)
+
+#define MPI2_FW_HEADER_SIZE                     (0x100)
+
+
+/****************************************************************************
+ *              Component Image Format and related defines                  *
+ ****************************************************************************/
+
+/*Maximum number of Hash Exclusion entries in a Component Image Header */
+#define MPI26_COMP_IMG_HDR_NUM_HASH_EXCL        (4)
+
+/*Hash Exclusion Format */
+typedef struct _MPI26_HASH_EXCLUSION_FORMAT {
+	U32 Offset;        /*0x00 */
+	U32 Size;          /*0x04 */
+} MPI26_HASH_EXCLUSION_FORMAT,
+	*PTR_MPI26_HASH_EXCLUSION_FORMAT,
+	Mpi26HashSxclusionFormat_t,
+	*pMpi26HashExclusionFormat_t;
+
+/*FW Image Header */
+typedef struct _MPI26_COMPONENT_IMAGE_HEADER {
+	U32 Signature0;					/*0x00 */
+	U32 LoadAddress;				/*0x04 */
+	U32 DataSize;					/*0x08 */
+	U32 StartAddress;				/*0x0C */
+	U32 Signature1;					/*0x10 */
+	U32 FlashOffset;				/*0x14 */
+	U32 FlashSize;					/*0x18 */
+	U32 VersionStringOffset;			/*0x1C */
+	U32 BuildDateStringOffset;			/*0x20 */
+	U32 BuildTimeStringOffset;			/*0x24 */
+	U32 EnvironmentVariableOffset;			/*0x28 */
+	U32 ApplicationSpecific;			/*0x2C */
+	U32 Signature2;					/*0x30 */
+	U32 HeaderSize;					/*0x34 */
+	U32 Crc;					/*0x38 */
+	U8 NotFlashImage;				/*0x3C */
+	U8 Compressed;					/*0x3D */
+	U16 Reserved3E;					/*0x3E */
+	U32 SecondaryFlashOffset;			/*0x40 */
+	U32 Reserved44;					/*0x44 */
+	U32 Reserved48;					/*0x48 */
+	MPI2_VERSION_UNION RMCInterfaceVersion;		/*0x4C */
+	MPI2_VERSION_UNION Reserved50;			/*0x50 */
+	MPI2_VERSION_UNION FWVersion;			/*0x54 */
+	MPI2_VERSION_UNION NvdataVersion;		/*0x58 */
+	MPI26_HASH_EXCLUSION_FORMAT
+	HashExclusion[MPI26_COMP_IMG_HDR_NUM_HASH_EXCL];/*0x5C */
+	U32 NextImageHeaderOffset;			/*0x7C */
+	U32 Reserved80[32];				/*0x80 -- 0xFC */
+} MPI26_COMPONENT_IMAGE_HEADER,
+	*PTR_MPI26_COMPONENT_IMAGE_HEADER,
+	Mpi26ComponentImageHeader_t,
+	*pMpi26ComponentImageHeader_t;
+
+
+/**** Definitions for Signature0 field ****/
+#define MPI26_IMAGE_HEADER_SIGNATURE0_MPI26                     (0xEB000042)
+
+/**** Definitions for Signature1 field ****/
+#define MPI26_IMAGE_HEADER_SIG1_APPLICATION              (0x20505041)
+#define MPI26_IMAGE_HEADER_SIG1_CBB                      (0x20424243)
+#define MPI26_IMAGE_HEADER_SIG1_MFG                      (0x2047464D)
+#define MPI26_IMAGE_HEADER_SIG1_BIOS                     (0x534F4942)
+#define MPI26_IMAGE_HEADER_SIG1_HIIM                     (0x4D494948)
+#define MPI26_IMAGE_HEADER_SIG1_HIIA                     (0x41494948)
+#define MPI26_IMAGE_HEADER_SIG1_CPLD                     (0x444C5043)
+#define MPI26_IMAGE_HEADER_SIG1_SPD                      (0x20445053)
+#define MPI26_IMAGE_HEADER_SIG1_NVDATA                   (0x5444564E)
+#define MPI26_IMAGE_HEADER_SIG1_GAS_GAUGE                (0x20534147)
+#define MPI26_IMAGE_HEADER_SIG1_PBLP                     (0x504C4250)
+/* little-endian "DUMP" */
+#define MPI26_IMAGE_HEADER_SIG1_COREDUMP                 (0x504D5544)
+
+/**** Definitions for Signature2 field ****/
+#define MPI26_IMAGE_HEADER_SIGNATURE2_VALUE                    (0x50584546)
+
+/**** Offsets for Image Header Fields ****/
+#define MPI26_IMAGE_HEADER_SIGNATURE0_OFFSET                   (0x00)
+#define MPI26_IMAGE_HEADER_LOAD_ADDRESS_OFFSET                 (0x04)
+#define MPI26_IMAGE_HEADER_DATA_SIZE_OFFSET                    (0x08)
+#define MPI26_IMAGE_HEADER_START_ADDRESS_OFFSET                (0x0C)
+#define MPI26_IMAGE_HEADER_SIGNATURE1_OFFSET                   (0x10)
+#define MPI26_IMAGE_HEADER_FLASH_OFFSET_OFFSET                 (0x14)
+#define MPI26_IMAGE_HEADER_FLASH_SIZE_OFFSET                   (0x18)
+#define MPI26_IMAGE_HEADER_VERSION_STRING_OFFSET_OFFSET        (0x1C)
+#define MPI26_IMAGE_HEADER_BUILD_DATE_STRING_OFFSET_OFFSET     (0x20)
+#define MPI26_IMAGE_HEADER_BUILD_TIME_OFFSET_OFFSET            (0x24)
+#define MPI26_IMAGE_HEADER_ENVIROMENT_VAR_OFFSET_OFFSET        (0x28)
+#define MPI26_IMAGE_HEADER_APPLICATION_SPECIFIC_OFFSET         (0x2C)
+#define MPI26_IMAGE_HEADER_SIGNATURE2_OFFSET                   (0x30)
+#define MPI26_IMAGE_HEADER_HEADER_SIZE_OFFSET                  (0x34)
+#define MPI26_IMAGE_HEADER_CRC_OFFSET                          (0x38)
+#define MPI26_IMAGE_HEADER_NOT_FLASH_IMAGE_OFFSET              (0x3C)
+#define MPI26_IMAGE_HEADER_COMPRESSED_OFFSET                   (0x3D)
+#define MPI26_IMAGE_HEADER_SECONDARY_FLASH_OFFSET_OFFSET       (0x40)
+#define MPI26_IMAGE_HEADER_RMC_INTERFACE_VER_OFFSET            (0x4C)
+#define MPI26_IMAGE_HEADER_COMPONENT_IMAGE_VER_OFFSET          (0x54)
+#define MPI26_IMAGE_HEADER_HASH_EXCLUSION_OFFSET               (0x5C)
+#define MPI26_IMAGE_HEADER_NEXT_IMAGE_HEADER_OFFSET_OFFSET     (0x7C)
+
+
+#define MPI26_IMAGE_HEADER_SIZE                                (0x100)
+
+
+/*Extended Image Header */
+typedef struct _MPI2_EXT_IMAGE_HEADER {
+	U8 ImageType;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U16 Reserved2;		/*0x02 */
+	U32 Checksum;		/*0x04 */
+	U32 ImageSize;		/*0x08 */
+	U32 NextImageHeaderOffset;	/*0x0C */
+	U32 PackageVersion;	/*0x10 */
+	U32 Reserved3;		/*0x14 */
+	U32 Reserved4;		/*0x18 */
+	U32 Reserved5;		/*0x1C */
+	U8 IdentifyString[32];	/*0x20 */
+} MPI2_EXT_IMAGE_HEADER, *PTR_MPI2_EXT_IMAGE_HEADER,
+	Mpi2ExtImageHeader_t, *pMpi2ExtImageHeader_t;
+
+/*useful offsets */
+#define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET         (0x00)
+#define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET         (0x08)
+#define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET         (0x0C)
+#define MPI2_EXT_IMAGE_PACKAGEVERSION_OFFSET   (0x10)
+
+#define MPI2_EXT_IMAGE_HEADER_SIZE              (0x40)
+
+/*defines for the ImageType field */
+#define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED             (0x00)
+#define MPI2_EXT_IMAGE_TYPE_FW                      (0x01)
+#define MPI2_EXT_IMAGE_TYPE_NVDATA                  (0x03)
+#define MPI2_EXT_IMAGE_TYPE_BOOTLOADER              (0x04)
+#define MPI2_EXT_IMAGE_TYPE_INITIALIZATION          (0x05)
+#define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT            (0x06)
+#define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES       (0x07)
+#define MPI2_EXT_IMAGE_TYPE_MEGARAID                (0x08)
+#define MPI2_EXT_IMAGE_TYPE_ENCRYPTED_HASH          (0x09)
+#define MPI2_EXT_IMAGE_TYPE_RDE                     (0x0A)
+#define MPI2_EXT_IMAGE_TYPE_PBLP                    (0x0B)
+#define MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC    (0x80)
+#define MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC    (0xFF)
+
+#define MPI2_EXT_IMAGE_TYPE_MAX (MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC)
+
+/*FLASH Layout Extended Image Data */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check RegionsPerLayout at runtime.
+ */
+#ifndef MPI2_FLASH_NUMBER_OF_REGIONS
+#define MPI2_FLASH_NUMBER_OF_REGIONS        (1)
+#endif
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check NumberOfLayouts at runtime.
+ */
+#ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS
+#define MPI2_FLASH_NUMBER_OF_LAYOUTS        (1)
+#endif
+
+typedef struct _MPI2_FLASH_REGION {
+	U8 RegionType;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U16 Reserved2;		/*0x02 */
+	U32 RegionOffset;	/*0x04 */
+	U32 RegionSize;		/*0x08 */
+	U32 Reserved3;		/*0x0C */
+} MPI2_FLASH_REGION, *PTR_MPI2_FLASH_REGION,
+	Mpi2FlashRegion_t, *pMpi2FlashRegion_t;
+
+typedef struct _MPI2_FLASH_LAYOUT {
+	U32 FlashSize;		/*0x00 */
+	U32 Reserved1;		/*0x04 */
+	U32 Reserved2;		/*0x08 */
+	U32 Reserved3;		/*0x0C */
+	MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS];	/*0x10 */
+} MPI2_FLASH_LAYOUT, *PTR_MPI2_FLASH_LAYOUT,
+	Mpi2FlashLayout_t, *pMpi2FlashLayout_t;
+
+typedef struct _MPI2_FLASH_LAYOUT_DATA {
+	U8 ImageRevision;	/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 SizeOfRegion;	/*0x02 */
+	U8 Reserved2;		/*0x03 */
+	U16 NumberOfLayouts;	/*0x04 */
+	U16 RegionsPerLayout;	/*0x06 */
+	U16 MinimumSectorAlignment;	/*0x08 */
+	U16 Reserved3;		/*0x0A */
+	U32 Reserved4;		/*0x0C */
+	MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS];	/*0x10 */
+} MPI2_FLASH_LAYOUT_DATA, *PTR_MPI2_FLASH_LAYOUT_DATA,
+	Mpi2FlashLayoutData_t, *pMpi2FlashLayoutData_t;
+
+/*defines for the RegionType field */
+#define MPI2_FLASH_REGION_UNUSED                (0x00)
+#define MPI2_FLASH_REGION_FIRMWARE              (0x01)
+#define MPI2_FLASH_REGION_BIOS                  (0x02)
+#define MPI2_FLASH_REGION_NVDATA                (0x03)
+#define MPI2_FLASH_REGION_FIRMWARE_BACKUP       (0x05)
+#define MPI2_FLASH_REGION_MFG_INFORMATION       (0x06)
+#define MPI2_FLASH_REGION_CONFIG_1              (0x07)
+#define MPI2_FLASH_REGION_CONFIG_2              (0x08)
+#define MPI2_FLASH_REGION_MEGARAID              (0x09)
+#define MPI2_FLASH_REGION_COMMON_BOOT_BLOCK     (0x0A)
+#define MPI2_FLASH_REGION_INIT (MPI2_FLASH_REGION_COMMON_BOOT_BLOCK)
+#define MPI2_FLASH_REGION_CBB_BACKUP            (0x0D)
+#define MPI2_FLASH_REGION_SBR                   (0x0E)
+#define MPI2_FLASH_REGION_SBR_BACKUP            (0x0F)
+#define MPI2_FLASH_REGION_HIIM                  (0x10)
+#define MPI2_FLASH_REGION_HIIA                  (0x11)
+#define MPI2_FLASH_REGION_CTLR                  (0x12)
+#define MPI2_FLASH_REGION_IMR_FIRMWARE          (0x13)
+#define MPI2_FLASH_REGION_MR_NVDATA             (0x14)
+#define MPI2_FLASH_REGION_CPLD                  (0x15)
+#define MPI2_FLASH_REGION_PSOC                  (0x16)
+#define MPI2_FLASH_REGION_COREDUMP              (0x17)
+
+/*ImageRevision */
+#define MPI2_FLASH_LAYOUT_IMAGE_REVISION        (0x00)
+
+/*Supported Devices Extended Image Data */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check NumberOfDevices at runtime.
+ */
+#ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES
+#define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES    (1)
+#endif
+
+typedef struct _MPI2_SUPPORTED_DEVICE {
+	U16 DeviceID;		/*0x00 */
+	U16 VendorID;		/*0x02 */
+	U16 DeviceIDMask;	/*0x04 */
+	U16 Reserved1;		/*0x06 */
+	U8 LowPCIRev;		/*0x08 */
+	U8 HighPCIRev;		/*0x09 */
+	U16 Reserved2;		/*0x0A */
+	U32 Reserved3;		/*0x0C */
+} MPI2_SUPPORTED_DEVICE, *PTR_MPI2_SUPPORTED_DEVICE,
+	Mpi2SupportedDevice_t, *pMpi2SupportedDevice_t;
+
+typedef struct _MPI2_SUPPORTED_DEVICES_DATA {
+	U8 ImageRevision;	/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 NumberOfDevices;	/*0x02 */
+	U8 Reserved2;		/*0x03 */
+	U32 Reserved3;		/*0x04 */
+	MPI2_SUPPORTED_DEVICE
+	SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES];/*0x08 */
+} MPI2_SUPPORTED_DEVICES_DATA, *PTR_MPI2_SUPPORTED_DEVICES_DATA,
+	Mpi2SupportedDevicesData_t, *pMpi2SupportedDevicesData_t;
+
+/*ImageRevision */
+#define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION   (0x00)
+
+/*Init Extended Image Data */
+
+typedef struct _MPI2_INIT_IMAGE_FOOTER {
+	U32 BootFlags;		/*0x00 */
+	U32 ImageSize;		/*0x04 */
+	U32 Signature0;		/*0x08 */
+	U32 Signature1;		/*0x0C */
+	U32 Signature2;		/*0x10 */
+	U32 ResetVector;	/*0x14 */
+} MPI2_INIT_IMAGE_FOOTER, *PTR_MPI2_INIT_IMAGE_FOOTER,
+	Mpi2InitImageFooter_t, *pMpi2InitImageFooter_t;
+
+/*defines for the BootFlags field */
+#define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET        (0x00)
+
+/*defines for the ImageSize field */
+#define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET        (0x04)
+
+/*defines for the Signature0 field */
+#define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET       (0x08)
+#define MPI2_INIT_IMAGE_SIGNATURE0              (0x5AA55AEA)
+
+/*defines for the Signature1 field */
+#define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET       (0x0C)
+#define MPI2_INIT_IMAGE_SIGNATURE1              (0xA55AEAA5)
+
+/*defines for the Signature2 field */
+#define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET       (0x10)
+#define MPI2_INIT_IMAGE_SIGNATURE2              (0x5AEAA55A)
+
+/*Signature fields as individual bytes */
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0        (0xEA)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1        (0x5A)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2        (0xA5)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3        (0x5A)
+
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4        (0xA5)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5        (0xEA)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6        (0x5A)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7        (0xA5)
+
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8        (0x5A)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9        (0xA5)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A        (0xEA)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B        (0x5A)
+
+/*defines for the ResetVector field */
+#define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET      (0x14)
+
+
+/* Encrypted Hash Extended Image Data */
+
+typedef struct _MPI25_ENCRYPTED_HASH_ENTRY {
+	U8		HashImageType;		/*0x00 */
+	U8		HashAlgorithm;		/*0x01 */
+	U8		EncryptionAlgorithm;	/*0x02 */
+	U8		Reserved1;		/*0x03 */
+	U32		Reserved2;		/*0x04 */
+	U32		EncryptedHash[1];	/*0x08 */ /* variable length */
+} MPI25_ENCRYPTED_HASH_ENTRY, *PTR_MPI25_ENCRYPTED_HASH_ENTRY,
+Mpi25EncryptedHashEntry_t, *pMpi25EncryptedHashEntry_t;
+
+/* values for HashImageType */
+#define MPI25_HASH_IMAGE_TYPE_UNUSED            (0x00)
+#define MPI25_HASH_IMAGE_TYPE_FIRMWARE          (0x01)
+#define MPI25_HASH_IMAGE_TYPE_BIOS              (0x02)
+
+#define MPI26_HASH_IMAGE_TYPE_UNUSED            (0x00)
+#define MPI26_HASH_IMAGE_TYPE_FIRMWARE          (0x01)
+#define MPI26_HASH_IMAGE_TYPE_BIOS              (0x02)
+#define MPI26_HASH_IMAGE_TYPE_KEY_HASH          (0x03)
+
+/* values for HashAlgorithm */
+#define MPI25_HASH_ALGORITHM_UNUSED             (0x00)
+#define MPI25_HASH_ALGORITHM_SHA256             (0x01)
+
+#define MPI26_HASH_ALGORITHM_VER_MASK		(0xE0)
+#define MPI26_HASH_ALGORITHM_VER_NONE		(0x00)
+#define MPI26_HASH_ALGORITHM_VER_SHA1		(0x20)
+#define MPI26_HASH_ALGORITHM_VER_SHA2		(0x40)
+#define MPI26_HASH_ALGORITHM_VER_SHA3		(0x60)
+#define MPI26_HASH_ALGORITHM_SIZE_MASK		(0x1F)
+#define MPI26_HASH_ALGORITHM_SIZE_256           (0x01)
+#define MPI26_HASH_ALGORITHM_SIZE_512           (0x02)
+
+
+/* values for EncryptionAlgorithm */
+#define MPI25_ENCRYPTION_ALG_UNUSED             (0x00)
+#define MPI25_ENCRYPTION_ALG_RSA256             (0x01)
+
+#define MPI26_ENCRYPTION_ALG_UNUSED             (0x00)
+#define MPI26_ENCRYPTION_ALG_RSA256             (0x01)
+#define MPI26_ENCRYPTION_ALG_RSA512             (0x02)
+#define MPI26_ENCRYPTION_ALG_RSA1024            (0x03)
+#define MPI26_ENCRYPTION_ALG_RSA2048            (0x04)
+#define MPI26_ENCRYPTION_ALG_RSA4096            (0x05)
+
+typedef struct _MPI25_ENCRYPTED_HASH_DATA {
+	U8				ImageVersion;		/*0x00 */
+	U8				NumHash;		/*0x01 */
+	U16				Reserved1;		/*0x02 */
+	U32				Reserved2;		/*0x04 */
+	MPI25_ENCRYPTED_HASH_ENTRY	EncryptedHashEntry[1];  /*0x08 */
+} MPI25_ENCRYPTED_HASH_DATA, *PTR_MPI25_ENCRYPTED_HASH_DATA,
+Mpi25EncryptedHashData_t, *pMpi25EncryptedHashData_t;
+
+
+#endif /* MPI2_IMAGE_H */
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_init.h b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
new file mode 100644
index 0000000000..8f1b903fe0
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
@@ -0,0 +1,591 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2000-2020 Broadcom Inc. All rights reserved.
+ *
+ *
+ *          Name:  mpi2_init.h
+ *         Title:  MPI SCSI initiator mode messages and structures
+ * Creation Date:  June 23, 2006
+ *
+ * mpi2_init.h Version:  02.00.21
+ *
+ * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
+ *       prefix are for use only on MPI v2.5 products, and must not be used
+ *       with MPI v2.0 products. Unless otherwise noted, names beginning with
+ *       MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
+ *
+ * Version History
+ * ---------------
+ *
+ * Date      Version   Description
+ * --------  --------  ------------------------------------------------------
+ * 04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 10-31-07  02.00.01  Fixed name for pMpi2SCSITaskManagementRequest_t.
+ * 12-18-07  02.00.02  Modified Task Management Target Reset Method defines.
+ * 02-29-08  02.00.03  Added Query Task Set and Query Unit Attention.
+ * 03-03-08  02.00.04  Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY.
+ * 05-21-08  02.00.05  Fixed typo in name of Mpi2SepRequest_t.
+ * 10-02-08  02.00.06  Removed Untagged and No Disconnect values from SCSI IO
+ *                     Control field Task Attribute flags.
+ *                     Moved LUN field defines to mpi2.h becasue they are
+ *                     common to many structures.
+ * 05-06-09  02.00.07  Changed task management type of Query Unit Attention to
+ *                     Query Asynchronous Event.
+ *                     Defined two new bits in the SlotStatus field of the SCSI
+ *                     Enclosure Processor Request and Reply.
+ * 10-28-09  02.00.08  Added defines for decoding the ResponseInfo bytes for
+ *                     both SCSI IO Error Reply and SCSI Task Management Reply.
+ *                     Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY.
+ *                     Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define.
+ * 02-10-10  02.00.09  Removed unused structure that had "#if 0" around it.
+ * 05-12-10  02.00.10  Added optional vendor-unique region to SCSI IO Request.
+ * 11-10-10  02.00.11  Added MPI2_SCSIIO_NUM_SGLOFFSETS define.
+ * 11-18-11  02.00.12  Incorporating additions for MPI v2.5.
+ * 02-06-12  02.00.13  Added alternate defines for Task Priority / Command
+ *                     Priority to match SAM-4.
+ *                     Added EEDPErrorOffset to MPI2_SCSI_IO_REPLY.
+ * 07-10-12  02.00.14  Added MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION.
+ * 04-09-13  02.00.15  Added SCSIStatusQualifier field to MPI2_SCSI_IO_REPLY,
+ *                     replacing the Reserved4 field.
+ * 11-18-14  02.00.16  Updated copyright information.
+ * 03-16-15  02.00.17  Updated for MPI v2.6.
+ *                     Added MPI26_SCSIIO_IOFLAGS_ESCAPE_PASSTHROUGH.
+ *                     Added MPI2_SEP_REQ_SLOTSTATUS_DEV_OFF and
+ *                     MPI2_SEP_REPLY_SLOTSTATUS_DEV_OFF.
+ * 08-26-15  02.00.18  Added SCSITASKMGMT_MSGFLAGS for Target Reset.
+ * 12-18-15  02.00.19  Added EEDPObservedValue added to SCSI IO Reply message.
+ * 01-04-16  02.00.20  Modified EEDP reported values in SCSI IO Reply message.
+ * 01-21-16  02.00.21  Modified MPI26_SCSITASKMGMT_MSGFLAGS_PCIE* defines to
+ *                     be unique within first 32 characters.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_INIT_H
+#define MPI2_INIT_H
+
+/*****************************************************************************
+*
+*              SCSI Initiator Messages
+*
+*****************************************************************************/
+
+/****************************************************************************
+* SCSI IO messages and associated structures
+****************************************************************************/
+
+typedef struct _MPI2_SCSI_IO_CDB_EEDP32 {
+	U8 CDB[20];		/*0x00 */
+	__be32 PrimaryReferenceTag;	/*0x14 */
+	U16 PrimaryApplicationTag;	/*0x18 */
+	U16 PrimaryApplicationTagMask;	/*0x1A */
+	U32 TransferLength;	/*0x1C */
+} MPI2_SCSI_IO_CDB_EEDP32, *PTR_MPI2_SCSI_IO_CDB_EEDP32,
+	Mpi2ScsiIoCdbEedp32_t, *pMpi2ScsiIoCdbEedp32_t;
+
+/*MPI v2.0 CDB field */
+typedef union _MPI2_SCSI_IO_CDB_UNION {
+	U8 CDB32[32];
+	MPI2_SCSI_IO_CDB_EEDP32 EEDP32;
+	MPI2_SGE_SIMPLE_UNION SGE;
+} MPI2_SCSI_IO_CDB_UNION, *PTR_MPI2_SCSI_IO_CDB_UNION,
+	Mpi2ScsiIoCdb_t, *pMpi2ScsiIoCdb_t;
+
+/*MPI v2.0 SCSI IO Request Message */
+typedef struct _MPI2_SCSI_IO_REQUEST {
+	U16 DevHandle;		/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved1;		/*0x04 */
+	U8 Reserved2;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved3;		/*0x0A */
+	U32 SenseBufferLowAddress;	/*0x0C */
+	U16 SGLFlags;		/*0x10 */
+	U8 SenseBufferLength;	/*0x12 */
+	U8 Reserved4;		/*0x13 */
+	U8 SGLOffset0;		/*0x14 */
+	U8 SGLOffset1;		/*0x15 */
+	U8 SGLOffset2;		/*0x16 */
+	U8 SGLOffset3;		/*0x17 */
+	U32 SkipCount;		/*0x18 */
+	U32 DataLength;		/*0x1C */
+	U32 BidirectionalDataLength;	/*0x20 */
+	U16 IoFlags;		/*0x24 */
+	U16 EEDPFlags;		/*0x26 */
+	U32 EEDPBlockSize;	/*0x28 */
+	U32 SecondaryReferenceTag;	/*0x2C */
+	U16 SecondaryApplicationTag;	/*0x30 */
+	U16 ApplicationTagTranslationMask;	/*0x32 */
+	U8 LUN[8];		/*0x34 */
+	U32 Control;		/*0x3C */
+	MPI2_SCSI_IO_CDB_UNION CDB;	/*0x40 */
+
+#ifdef MPI2_SCSI_IO_VENDOR_UNIQUE_REGION /*typically this is left undefined */
+	MPI2_SCSI_IO_VENDOR_UNIQUE VendorRegion;
+#endif
+
+	MPI2_SGE_IO_UNION SGL;	/*0x60 */
+
+} MPI2_SCSI_IO_REQUEST, *PTR_MPI2_SCSI_IO_REQUEST,
+	Mpi2SCSIIORequest_t, *pMpi2SCSIIORequest_t;
+
+/*SCSI IO MsgFlags bits */
+
+/*MsgFlags for SenseBufferAddressSpace */
+#define MPI2_SCSIIO_MSGFLAGS_MASK_SENSE_ADDR        (0x0C)
+#define MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR      (0x00)
+#define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR      (0x04)
+#define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR      (0x08)
+#define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR   (0x0C)
+#define MPI26_SCSIIO_MSGFLAGS_IOCCTL_SENSE_ADDR     (0x08)
+
+/*SCSI IO SGLFlags bits */
+
+/*base values for Data Location Address Space */
+#define MPI2_SCSIIO_SGLFLAGS_ADDR_MASK              (0x0C)
+#define MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR            (0x00)
+#define MPI2_SCSIIO_SGLFLAGS_IOCDDR_ADDR            (0x04)
+#define MPI2_SCSIIO_SGLFLAGS_IOCPLB_ADDR            (0x08)
+#define MPI2_SCSIIO_SGLFLAGS_IOCPLBNTA_ADDR         (0x0C)
+
+/*base values for Type */
+#define MPI2_SCSIIO_SGLFLAGS_TYPE_MASK              (0x03)
+#define MPI2_SCSIIO_SGLFLAGS_TYPE_MPI               (0x00)
+#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE32            (0x01)
+#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE64            (0x02)
+
+/*shift values for each sub-field */
+#define MPI2_SCSIIO_SGLFLAGS_SGL3_SHIFT             (12)
+#define MPI2_SCSIIO_SGLFLAGS_SGL2_SHIFT             (8)
+#define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT             (4)
+#define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT             (0)
+
+/*number of SGLOffset fields */
+#define MPI2_SCSIIO_NUM_SGLOFFSETS                  (4)
+
+/*SCSI IO IoFlags bits */
+
+/*Large CDB Address Space */
+#define MPI2_SCSIIO_CDB_ADDR_MASK                   (0x6000)
+#define MPI2_SCSIIO_CDB_ADDR_SYSTEM                 (0x0000)
+#define MPI2_SCSIIO_CDB_ADDR_IOCDDR                 (0x2000)
+#define MPI2_SCSIIO_CDB_ADDR_IOCPLB                 (0x4000)
+#define MPI2_SCSIIO_CDB_ADDR_IOCPLBNTA              (0x6000)
+
+#define MPI2_SCSIIO_IOFLAGS_LARGE_CDB               (0x1000)
+#define MPI2_SCSIIO_IOFLAGS_BIDIRECTIONAL           (0x0800)
+#define MPI2_SCSIIO_IOFLAGS_MULTICAST               (0x0400)
+#define MPI2_SCSIIO_IOFLAGS_CMD_DETERMINES_DATA_DIR (0x0200)
+#define MPI2_SCSIIO_IOFLAGS_CDBLENGTH_MASK          (0x01FF)
+
+/*SCSI IO EEDPFlags bits */
+
+#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG        (0x8000)
+#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_REFTAG        (0x4000)
+#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG        (0x2000)
+#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_APPTAG        (0x1000)
+
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG          (0x0400)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG          (0x0200)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD           (0x0100)
+
+#define MPI2_SCSIIO_EEDPFLAGS_PASSTHRU_REFTAG       (0x0008)
+
+#define MPI2_SCSIIO_EEDPFLAGS_MASK_OP               (0x0007)
+#define MPI2_SCSIIO_EEDPFLAGS_NOOP_OP               (0x0000)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_OP              (0x0001)
+#define MPI2_SCSIIO_EEDPFLAGS_STRIP_OP              (0x0002)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP       (0x0003)
+#define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP             (0x0004)
+#define MPI2_SCSIIO_EEDPFLAGS_REPLACE_OP            (0x0006)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REGEN_OP        (0x0007)
+
+/*SCSI IO LUN fields: use MPI2_LUN_ from mpi2.h */
+
+/*SCSI IO Control bits */
+#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK      (0xFC000000)
+#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT     (26)
+
+#define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK  (0x03000000)
+#define MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION (24)
+#define MPI2_SCSIIO_CONTROL_NODATATRANSFER      (0x00000000)
+#define MPI2_SCSIIO_CONTROL_WRITE               (0x01000000)
+#define MPI2_SCSIIO_CONTROL_READ                (0x02000000)
+#define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL       (0x03000000)
+
+#define MPI2_SCSIIO_CONTROL_TASKPRI_MASK        (0x00007800)
+#define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT       (11)
+/*alternate name for the previous field; called Command Priority in SAM-4 */
+#define MPI2_SCSIIO_CONTROL_CMDPRI_MASK         (0x00007800)
+#define MPI2_SCSIIO_CONTROL_CMDPRI_SHIFT        (11)
+
+#define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK  (0x00000700)
+#define MPI2_SCSIIO_CONTROL_SIMPLEQ             (0x00000000)
+#define MPI2_SCSIIO_CONTROL_HEADOFQ             (0x00000100)
+#define MPI2_SCSIIO_CONTROL_ORDEREDQ            (0x00000200)
+#define MPI2_SCSIIO_CONTROL_ACAQ                (0x00000400)
+
+#define MPI2_SCSIIO_CONTROL_TLR_MASK            (0x000000C0)
+#define MPI2_SCSIIO_CONTROL_NO_TLR              (0x00000000)
+#define MPI2_SCSIIO_CONTROL_TLR_ON              (0x00000040)
+#define MPI2_SCSIIO_CONTROL_TLR_OFF             (0x00000080)
+
+/*MPI v2.5 CDB field */
+typedef union _MPI25_SCSI_IO_CDB_UNION {
+	U8 CDB32[32];
+	MPI2_SCSI_IO_CDB_EEDP32 EEDP32;
+	MPI2_IEEE_SGE_SIMPLE64 SGE;
+} MPI25_SCSI_IO_CDB_UNION, *PTR_MPI25_SCSI_IO_CDB_UNION,
+	Mpi25ScsiIoCdb_t, *pMpi25ScsiIoCdb_t;
+
+/*MPI v2.5/2.6 SCSI IO Request Message */
+typedef struct _MPI25_SCSI_IO_REQUEST {
+	U16 DevHandle;		/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved1;		/*0x04 */
+	U8 Reserved2;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved3;		/*0x0A */
+	U32 SenseBufferLowAddress;	/*0x0C */
+	U8 DMAFlags;		/*0x10 */
+	U8 Reserved5;		/*0x11 */
+	U8 SenseBufferLength;	/*0x12 */
+	U8 Reserved4;		/*0x13 */
+	U8 SGLOffset0;		/*0x14 */
+	U8 SGLOffset1;		/*0x15 */
+	U8 SGLOffset2;		/*0x16 */
+	U8 SGLOffset3;		/*0x17 */
+	U32 SkipCount;		/*0x18 */
+	U32 DataLength;		/*0x1C */
+	U32 BidirectionalDataLength;	/*0x20 */
+	U16 IoFlags;		/*0x24 */
+	U16 EEDPFlags;		/*0x26 */
+	U16 EEDPBlockSize;	/*0x28 */
+	U16 Reserved6;		/*0x2A */
+	U32 SecondaryReferenceTag;	/*0x2C */
+	U16 SecondaryApplicationTag;	/*0x30 */
+	U16 ApplicationTagTranslationMask;	/*0x32 */
+	U8 LUN[8];		/*0x34 */
+	U32 Control;		/*0x3C */
+	MPI25_SCSI_IO_CDB_UNION CDB;	/*0x40 */
+
+#ifdef MPI25_SCSI_IO_VENDOR_UNIQUE_REGION /*typically this is left undefined */
+	MPI25_SCSI_IO_VENDOR_UNIQUE VendorRegion;
+#endif
+
+	MPI25_SGE_IO_UNION SGL;	/*0x60 */
+
+} MPI25_SCSI_IO_REQUEST, *PTR_MPI25_SCSI_IO_REQUEST,
+	Mpi25SCSIIORequest_t, *pMpi25SCSIIORequest_t;
+
+/*use MPI2_SCSIIO_MSGFLAGS_ defines for the MsgFlags field */
+
+/*Defines for the DMAFlags field
+ * Each setting affects 4 SGLS, from SGL0 to SGL3.
+ *     D = Data
+ *     C = Cache DIF
+ *     I = Interleaved
+ *     H = Host DIF
+ */
+#define MPI25_SCSIIO_DMAFLAGS_OP_MASK               (0x0F)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_D_D            (0x00)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_D_C            (0x01)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_D_I            (0x02)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_C_C            (0x03)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_C_I            (0x04)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_I_I            (0x05)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_C_C_C            (0x06)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_C_C_I            (0x07)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_C_I_I            (0x08)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_I_I_I            (0x09)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_D_D            (0x0A)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_D_C            (0x0B)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_D_I            (0x0C)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_C_C            (0x0D)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_C_I            (0x0E)
+#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_I_I            (0x0F)
+
+/*number of SGLOffset fields */
+#define MPI25_SCSIIO_NUM_SGLOFFSETS                 (4)
+
+/*defines for the IoFlags field */
+#define MPI25_SCSIIO_IOFLAGS_IO_PATH_MASK               (0xC000)
+#define MPI25_SCSIIO_IOFLAGS_NORMAL_PATH                (0x0000)
+#define MPI25_SCSIIO_IOFLAGS_FAST_PATH                  (0x4000)
+
+#define MPI26_SCSIIO_IOFLAGS_ESCAPE_PASSTHROUGH         (0x2000)
+#define MPI25_SCSIIO_IOFLAGS_LARGE_CDB                  (0x1000)
+#define MPI25_SCSIIO_IOFLAGS_BIDIRECTIONAL              (0x0800)
+#define MPI26_SCSIIO_IOFLAGS_PORT_REQUEST               (0x0400)
+#define MPI25_SCSIIO_IOFLAGS_CDBLENGTH_MASK             (0x01FF)
+
+/*MPI v2.5 defines for the EEDPFlags bits */
+/*use MPI2_SCSIIO_EEDPFLAGS_ defines for the other EEDPFlags bits */
+#define MPI25_SCSIIO_EEDPFLAGS_ESCAPE_MODE_MASK             (0x00C0)
+#define MPI25_SCSIIO_EEDPFLAGS_COMPATIBLE_MODE              (0x0000)
+#define MPI25_SCSIIO_EEDPFLAGS_DO_NOT_DISABLE_MODE          (0x0040)
+#define MPI25_SCSIIO_EEDPFLAGS_APPTAG_DISABLE_MODE          (0x0080)
+#define MPI25_SCSIIO_EEDPFLAGS_APPTAG_REFTAG_DISABLE_MODE   (0x00C0)
+
+#define MPI25_SCSIIO_EEDPFLAGS_HOST_GUARD_METHOD_MASK       (0x0030)
+#define MPI25_SCSIIO_EEDPFLAGS_T10_CRC_HOST_GUARD           (0x0000)
+#define MPI25_SCSIIO_EEDPFLAGS_IP_CHKSUM_HOST_GUARD         (0x0010)
+
+/*use MPI2_LUN_ defines from mpi2.h for the LUN field */
+
+/*use MPI2_SCSIIO_CONTROL_ defines for the Control field */
+
+/*NOTE: The SCSI IO Reply is nearly the same for MPI 2.0 and MPI 2.5, so
+ *      MPI2_SCSI_IO_REPLY is used for both.
+ */
+
+/*SCSI IO Error Reply Message */
+typedef struct _MPI2_SCSI_IO_REPLY {
+	U16 DevHandle;		/*0x00 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved1;		/*0x04 */
+	U8 Reserved2;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved3;		/*0x0A */
+	U8 SCSIStatus;		/*0x0C */
+	U8 SCSIState;		/*0x0D */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U32 TransferCount;	/*0x14 */
+	U32 SenseCount;		/*0x18 */
+	U32 ResponseInfo;	/*0x1C */
+	U16 TaskTag;		/*0x20 */
+	U16 SCSIStatusQualifier; /* 0x22 */
+	U32 BidirectionalTransferCount;	/*0x24 */
+ /* MPI 2.5+ only; Reserved in MPI 2.0 */
+	U32 EEDPErrorOffset;	/* 0x28 */
+ /* MPI 2.5+ only; Reserved in MPI 2.0 */
+	U16 EEDPObservedAppTag;	/* 0x2C */
+ /* MPI 2.5+ only; Reserved in MPI 2.0 */
+	U16 EEDPObservedGuard;	/* 0x2E */
+ /* MPI 2.5+ only; Reserved in MPI 2.0 */
+	U32 EEDPObservedRefTag;	/* 0x30 */
+} MPI2_SCSI_IO_REPLY, *PTR_MPI2_SCSI_IO_REPLY,
+	Mpi2SCSIIOReply_t, *pMpi2SCSIIOReply_t;
+
+/*SCSI IO Reply MsgFlags bits */
+#define MPI26_SCSIIO_REPLY_MSGFLAGS_REFTAG_OBSERVED_VALID     (0x01)
+#define MPI26_SCSIIO_REPLY_MSGFLAGS_GUARD_OBSERVED_VALID      (0x02)
+#define MPI26_SCSIIO_REPLY_MSGFLAGS_APPTAG_OBSERVED_VALID     (0x04)
+
+/*SCSI IO Reply SCSIStatus values (SAM-4 status codes) */
+
+#define MPI2_SCSI_STATUS_GOOD                   (0x00)
+#define MPI2_SCSI_STATUS_CHECK_CONDITION        (0x02)
+#define MPI2_SCSI_STATUS_CONDITION_MET          (0x04)
+#define MPI2_SCSI_STATUS_BUSY                   (0x08)
+#define MPI2_SCSI_STATUS_INTERMEDIATE           (0x10)
+#define MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET   (0x14)
+#define MPI2_SCSI_STATUS_RESERVATION_CONFLICT   (0x18)
+#define MPI2_SCSI_STATUS_COMMAND_TERMINATED     (0x22)	/*obsolete */
+#define MPI2_SCSI_STATUS_TASK_SET_FULL          (0x28)
+#define MPI2_SCSI_STATUS_ACA_ACTIVE             (0x30)
+#define MPI2_SCSI_STATUS_TASK_ABORTED           (0x40)
+
+/*SCSI IO Reply SCSIState flags */
+
+#define MPI2_SCSI_STATE_RESPONSE_INFO_VALID     (0x10)
+#define MPI2_SCSI_STATE_TERMINATED              (0x08)
+#define MPI2_SCSI_STATE_NO_SCSI_STATUS          (0x04)
+#define MPI2_SCSI_STATE_AUTOSENSE_FAILED        (0x02)
+#define MPI2_SCSI_STATE_AUTOSENSE_VALID         (0x01)
+
+/*masks and shifts for the ResponseInfo field */
+
+#define MPI2_SCSI_RI_MASK_REASONCODE            (0x000000FF)
+#define MPI2_SCSI_RI_SHIFT_REASONCODE           (0)
+
+#define MPI2_SCSI_TASKTAG_UNKNOWN               (0xFFFF)
+
+/****************************************************************************
+* SCSI Task Management messages
+****************************************************************************/
+
+/*SCSI Task Management Request Message */
+typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST {
+	U16 DevHandle;		/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U8 Reserved1;		/*0x04 */
+	U8 TaskType;		/*0x05 */
+	U8 Reserved2;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved3;		/*0x0A */
+	U8 LUN[8];		/*0x0C */
+	U32 Reserved4[7];	/*0x14 */
+	U16 TaskMID;		/*0x30 */
+	U16 Reserved5;		/*0x32 */
+} MPI2_SCSI_TASK_MANAGE_REQUEST,
+	*PTR_MPI2_SCSI_TASK_MANAGE_REQUEST,
+	Mpi2SCSITaskManagementRequest_t,
+	*pMpi2SCSITaskManagementRequest_t;
+
+/*TaskType values */
+
+#define MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK           (0x01)
+#define MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET        (0x02)
+#define MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET         (0x03)
+#define MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET   (0x05)
+#define MPI2_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET       (0x06)
+#define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK           (0x07)
+#define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA              (0x08)
+#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET         (0x09)
+#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT      (0x0A)
+
+/*obsolete TaskType name */
+#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION \
+		(MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT)
+
+/*MsgFlags bits */
+
+#define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET    (0x18)
+#define MPI26_SCSITASKMGMT_MSGFLAGS_HOT_RESET_PCIE        (0x00)
+#define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET           (0x00)
+#define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST     (0x08)
+#define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET  (0x10)
+
+#define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU  (0x01)
+#define MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE (0x18)
+
+/*SCSI Task Management Reply Message */
+typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY {
+	U16 DevHandle;		/*0x00 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U8 ResponseCode;	/*0x04 */
+	U8 TaskType;		/*0x05 */
+	U8 Reserved1;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved2;		/*0x0A */
+	U16 Reserved3;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U32 TerminationCount;	/*0x14 */
+	U32 ResponseInfo;	/*0x18 */
+} MPI2_SCSI_TASK_MANAGE_REPLY,
+	*PTR_MPI2_SCSI_TASK_MANAGE_REPLY,
+	Mpi2SCSITaskManagementReply_t, *pMpi2SCSIManagementReply_t;
+
+/*ResponseCode values */
+
+#define MPI2_SCSITASKMGMT_RSP_TM_COMPLETE               (0x00)
+#define MPI2_SCSITASKMGMT_RSP_INVALID_FRAME             (0x02)
+#define MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED          (0x04)
+#define MPI2_SCSITASKMGMT_RSP_TM_FAILED                 (0x05)
+#define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED              (0x08)
+#define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN            (0x09)
+#define MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG         (0x0A)
+#define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC          (0x80)
+
+/*masks and shifts for the ResponseInfo field */
+
+#define MPI2_SCSITASKMGMT_RI_MASK_REASONCODE            (0x000000FF)
+#define MPI2_SCSITASKMGMT_RI_SHIFT_REASONCODE           (0)
+#define MPI2_SCSITASKMGMT_RI_MASK_ARI2                  (0x0000FF00)
+#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI2                 (8)
+#define MPI2_SCSITASKMGMT_RI_MASK_ARI1                  (0x00FF0000)
+#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI1                 (16)
+#define MPI2_SCSITASKMGMT_RI_MASK_ARI0                  (0xFF000000)
+#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI0                 (24)
+
+/****************************************************************************
+* SCSI Enclosure Processor messages
+****************************************************************************/
+
+/*SCSI Enclosure Processor Request Message */
+typedef struct _MPI2_SEP_REQUEST {
+	U16 DevHandle;		/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U8 Action;		/*0x04 */
+	U8 Flags;		/*0x05 */
+	U8 Reserved1;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved2;		/*0x0A */
+	U32 SlotStatus;		/*0x0C */
+	U32 Reserved3;		/*0x10 */
+	U32 Reserved4;		/*0x14 */
+	U32 Reserved5;		/*0x18 */
+	U16 Slot;		/*0x1C */
+	U16 EnclosureHandle;	/*0x1E */
+} MPI2_SEP_REQUEST, *PTR_MPI2_SEP_REQUEST,
+	Mpi2SepRequest_t, *pMpi2SepRequest_t;
+
+/*Action defines */
+#define MPI2_SEP_REQ_ACTION_WRITE_STATUS                (0x00)
+#define MPI2_SEP_REQ_ACTION_READ_STATUS                 (0x01)
+
+/*Flags defines */
+#define MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS            (0x00)
+#define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS       (0x01)
+
+/*SlotStatus defines */
+#define MPI2_SEP_REQ_SLOTSTATUS_DEV_OFF                 (0x00080000)
+#define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE          (0x00040000)
+#define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST        (0x00020000)
+#define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED         (0x00000200)
+#define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE               (0x00000100)
+#define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED            (0x00000080)
+#define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT         (0x00000040)
+#define MPI2_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY       (0x00000010)
+#define MPI2_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY         (0x00000008)
+#define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING          (0x00000004)
+#define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY              (0x00000002)
+#define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR                (0x00000001)
+
+/*SCSI Enclosure Processor Reply Message */
+typedef struct _MPI2_SEP_REPLY {
+	U16 DevHandle;		/*0x00 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U8 Action;		/*0x04 */
+	U8 Flags;		/*0x05 */
+	U8 Reserved1;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved2;		/*0x0A */
+	U16 Reserved3;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U32 SlotStatus;		/*0x14 */
+	U32 Reserved4;		/*0x18 */
+	U16 Slot;		/*0x1C */
+	U16 EnclosureHandle;	/*0x1E */
+} MPI2_SEP_REPLY, *PTR_MPI2_SEP_REPLY,
+	Mpi2SepReply_t, *pMpi2SepReply_t;
+
+/*SlotStatus defines */
+#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_OFF               (0x00080000)
+#define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY          (0x00040000)
+#define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST      (0x00020000)
+#define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED       (0x00000200)
+#define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE             (0x00000100)
+#define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED          (0x00000080)
+#define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT       (0x00000040)
+#define MPI2_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY     (0x00000010)
+#define MPI2_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY       (0x00000008)
+#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING        (0x00000004)
+#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY            (0x00000002)
+#define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR              (0x00000001)
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
new file mode 100644
index 0000000000..2c57115172
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
@@ -0,0 +1,1811 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2000-2020 Broadcom Inc. All rights reserved.
+ *
+ *
+ *          Name:  mpi2_ioc.h
+ *         Title:  MPI IOC, Port, Event, FW Download, and FW Upload messages
+ * Creation Date:  October 11, 2006
+ *
+ * mpi2_ioc.h Version:  02.00.37
+ *
+ * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
+ *       prefix are for use only on MPI v2.5 products, and must not be used
+ *       with MPI v2.0 products. Unless otherwise noted, names beginning with
+ *       MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
+ *
+ * Version History
+ * ---------------
+ *
+ * Date      Version   Description
+ * --------  --------  ------------------------------------------------------
+ * 04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 06-04-07  02.00.01  In IOCFacts Reply structure, renamed MaxDevices to
+ *                     MaxTargets.
+ *                     Added TotalImageSize field to FWDownload Request.
+ *                     Added reserved words to FWUpload Request.
+ * 06-26-07  02.00.02  Added IR Configuration Change List Event.
+ * 08-31-07  02.00.03  Removed SystemReplyQueueDepth field from the IOCInit
+ *                     request and replaced it with
+ *                     ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth.
+ *                     Replaced the MinReplyQueueDepth field of the IOCFacts
+ *                     reply with MaxReplyDescriptorPostQueueDepth.
+ *                     Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum
+ *                     depth for the Reply Descriptor Post Queue.
+ *                     Added SASAddress field to Initiator Device Table
+ *                     Overflow Event data.
+ * 10-31-07  02.00.04  Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING
+ *                     for SAS Initiator Device Status Change Event data.
+ *                     Modified Reason Code defines for SAS Topology Change
+ *                     List Event data, including adding a bit for PHY Vacant
+ *                     status, and adding a mask for the Reason Code.
+ *                     Added define for
+ *                     MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING.
+ *                     Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID.
+ * 12-18-07  02.00.05  Added Boot Status defines for the IOCExceptions field of
+ *                     the IOCFacts Reply.
+ *                     Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
+ *                     Moved MPI2_VERSION_UNION to mpi2.h.
+ *                     Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks
+ *                     instead of enables, and added SASBroadcastPrimitiveMasks
+ *                     field.
+ *                     Added Log Entry Added Event and related structure.
+ * 02-29-08  02.00.06  Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID.
+ *                     Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET.
+ *                     Added MaxVolumes and MaxPersistentEntries fields to
+ *                     IOCFacts reply.
+ *                     Added ProtocalFlags and IOCCapabilities fields to
+ *                     MPI2_FW_IMAGE_HEADER.
+ *                     Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT.
+ * 03-03-08  02.00.07  Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to
+ *                     a U16 (from a U32).
+ *                     Removed extra 's' from EventMasks name.
+ * 06-27-08  02.00.08  Fixed an offset in a comment.
+ * 10-02-08  02.00.09  Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST.
+ *                     Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and
+ *                     renamed MinReplyFrameSize to ReplyFrameSize.
+ *                     Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX.
+ *                     Added two new RAIDOperation values for Integrated RAID
+ *                     Operations Status Event data.
+ *                     Added four new IR Configuration Change List Event data
+ *                     ReasonCode values.
+ *                     Added two new ReasonCode defines for SAS Device Status
+ *                     Change Event data.
+ *                     Added three new DiscoveryStatus bits for the SAS
+ *                     Discovery event data.
+ *                     Added Multiplexing Status Change bit to the PhyStatus
+ *                     field of the SAS Topology Change List event data.
+ *                     Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY.
+ *                     BootFlags are now product-specific.
+ *                     Added defines for the indivdual signature bytes
+ *                     for MPI2_INIT_IMAGE_FOOTER.
+ * 01-19-09  02.00.10  Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define.
+ *                     Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR
+ *                     define.
+ *                     Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE
+ *                     define.
+ *                     Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define.
+ * 05-06-09  02.00.11  Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define.
+ *                     Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define.
+ *                     Added two new reason codes for SAS Device Status Change
+ *                     Event.
+ *                     Added new event: SAS PHY Counter.
+ * 07-30-09  02.00.12  Added GPIO Interrupt event define and structure.
+ *                     Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
+ *                     Added new product id family for 2208.
+ * 10-28-09  02.00.13  Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST.
+ *                     Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY.
+ *                     Added MinDevHandle field to MPI2_IOC_FACTS_REPLY.
+ *                     Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY.
+ *                     Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define.
+ *                     Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define.
+ *                     Added Host Based Discovery Phy Event data.
+ *                     Added defines for ProductID Product field
+ *                     (MPI2_FW_HEADER_PID_).
+ *                     Modified values for SAS ProductID Family
+ *                     (MPI2_FW_HEADER_PID_FAMILY_).
+ * 02-10-10  02.00.14  Added SAS Quiesce Event structure and defines.
+ *                     Added PowerManagementControl Request structures and
+ *                     defines.
+ * 05-12-10  02.00.15  Marked Task Set Full Event as obsolete.
+ *                     Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define.
+ * 11-10-10  02.00.16  Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC.
+ * 02-23-11  02.00.17  Added SAS NOTIFY Primitive event, and added
+ *                     SASNotifyPrimitiveMasks field to
+ *                     MPI2_EVENT_NOTIFICATION_REQUEST.
+ *                     Added Temperature Threshold Event.
+ *                     Added Host Message Event.
+ *                     Added Send Host Message request and reply.
+ * 05-25-11  02.00.18  For Extended Image Header, added
+ *                     MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and
+ *                     MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines.
+ *                     Deprecated MPI2_EXT_IMAGE_TYPE_MAX define.
+ * 08-24-11  02.00.19  Added PhysicalPort field to
+ *                     MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure.
+ *                     Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete.
+ * 11-18-11  02.00.20  Incorporating additions for MPI v2.5.
+ * 03-29-12  02.00.21  Added a product specific range to event values.
+ * 07-26-12  02.00.22  Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE.
+ *                     Added ElapsedSeconds field to
+ *                     MPI2_EVENT_DATA_IR_OPERATION_STATUS.
+ * 08-19-13  02.00.23  For IOCInit, added MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE
+ *			and MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY.
+ *			Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE.
+ *			Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY.
+ *			Added Encrypted Hash Extended Image.
+ * 12-05-13  02.00.24  Added MPI25_HASH_IMAGE_TYPE_BIOS.
+ * 11-18-14  02.00.25  Updated copyright information.
+ * 03-16-15  02.00.26  Updated for MPI v2.6.
+ *		       Added MPI2_EVENT_ACTIVE_CABLE_EXCEPTION and
+ *		       MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT.
+ *                     Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and
+ *                     MPI26_FW_HEADER_PID_FAMILY_3516_SAS.
+ *                     Added MPI26_CTRL_OP_SHUTDOWN.
+ * 08-25-15  02.00.27  Added IC ARCH Class based signature defines.
+ *                     Added MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED event.
+ *                     Added ConigurationFlags field to IOCInit message to
+ *                     support NVMe SGL format control.
+ *                     Added PCIe SRIOV support.
+ * 02-17-16   02.00.28 Added SAS 4 22.5 gbs speed support.
+ *                     Added PCIe 4 16.0 GT/sec speec support.
+ *                     Removed AHCI support.
+ *                     Removed SOP support.
+ * 07-01-16   02.00.29 Added Archclass for 4008 product.
+ *                     Added IOCException MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED
+ * 08-23-16   02.00.30 Added new defines for the ImageType field of FWDownload
+ *                     Request Message.
+ *                     Added new defines for the ImageType field of FWUpload
+ *                     Request Message.
+ *                     Added new values for the RegionType field in the Layout
+ *                     Data sections of the FLASH Layout Extended Image Data.
+ *                     Added new defines for the ReasonCode field of
+ *                     Active Cable Exception Event.
+ *                     Added MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE and
+ *                     MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE.
+ * 11-23-16   02.00.31 Added MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR and
+ *                     MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR.
+ * 02-02-17   02.00.32 Added MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP.
+ *                     Added MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT and related
+ *                     defines for the ReasonCode field.
+ * 06-13-17   02.00.33 Added MPI2_FW_DOWNLOAD_ITYPE_CPLD.
+ * 09-29-17   02.00.34 Added MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED
+ *                     to the ReasonCode field in PCIe Device Status Change
+ *                     Event Data.
+ * 07-22-18   02.00.35 Added FW_DOWNLOAD_ITYPE_CPLD and _PSOC.
+ *                     Moved FW image definitions ionto new mpi2_image,h
+ * 08-14-18   02.00.36 Fixed definition of MPI2_FW_DOWNLOAD_ITYPE_PSOC (0x16)
+ * 09-07-18   02.00.37 Added MPI26_EVENT_PCIE_TOPO_PI_16_LANES
+ * 10-02-19   02.00.38 Added MPI26_IOCINIT_CFGFLAGS_COREDUMP_ENABLE
+ *                     Added MPI26_IOCFACTS_CAPABILITY_COREDUMP_ENABLED
+ *                     Added MPI2_FW_DOWNLOAD_ITYPE_COREDUMP
+ *                     Added MPI2_FW_UPLOAD_ITYPE_COREDUMP
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_IOC_H
+#define MPI2_IOC_H
+
+/*****************************************************************************
+*
+*              IOC Messages
+*
+*****************************************************************************/
+
+/****************************************************************************
+* IOCInit message
+****************************************************************************/
+
+/*IOCInit Request message */
+typedef struct _MPI2_IOC_INIT_REQUEST {
+	U8 WhoInit;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 MsgVersion;		/*0x0C */
+	U16 HeaderVersion;	/*0x0E */
+	U32 Reserved5;		/*0x10 */
+	U16 ConfigurationFlags;	/* 0x14 */
+	U8 HostPageSize;	/*0x16 */
+	U8 HostMSIxVectors;	/*0x17 */
+	U16 Reserved8;		/*0x18 */
+	U16 SystemRequestFrameSize;	/*0x1A */
+	U16 ReplyDescriptorPostQueueDepth;	/*0x1C */
+	U16 ReplyFreeQueueDepth;	/*0x1E */
+	U32 SenseBufferAddressHigh;	/*0x20 */
+	U32 SystemReplyAddressHigh;	/*0x24 */
+	U64 SystemRequestFrameBaseAddress;	/*0x28 */
+	U64 ReplyDescriptorPostQueueAddress;	/*0x30 */
+	U64 ReplyFreeQueueAddress;	/*0x38 */
+	U64 TimeStamp;		/*0x40 */
+} MPI2_IOC_INIT_REQUEST, *PTR_MPI2_IOC_INIT_REQUEST,
+	Mpi2IOCInitRequest_t, *pMpi2IOCInitRequest_t;
+
+/*WhoInit values */
+#define MPI2_WHOINIT_NOT_INITIALIZED            (0x00)
+#define MPI2_WHOINIT_SYSTEM_BIOS                (0x01)
+#define MPI2_WHOINIT_ROM_BIOS                   (0x02)
+#define MPI2_WHOINIT_PCI_PEER                   (0x03)
+#define MPI2_WHOINIT_HOST_DRIVER                (0x04)
+#define MPI2_WHOINIT_MANUFACTURER               (0x05)
+
+/* MsgFlags */
+#define MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE    (0x01)
+
+
+/*MsgVersion */
+#define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK      (0xFF00)
+#define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT     (8)
+#define MPI2_IOCINIT_MSGVERSION_MINOR_MASK      (0x00FF)
+#define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT     (0)
+
+/*HeaderVersion */
+#define MPI2_IOCINIT_HDRVERSION_UNIT_MASK       (0xFF00)
+#define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT      (8)
+#define MPI2_IOCINIT_HDRVERSION_DEV_MASK        (0x00FF)
+#define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT       (0)
+
+/*ConfigurationFlags */
+#define MPI26_IOCINIT_CFGFLAGS_NVME_SGL_FORMAT  (0x0001)
+#define MPI26_IOCINIT_CFGFLAGS_COREDUMP_ENABLE  (0x0002)
+
+/*minimum depth for a Reply Descriptor Post Queue */
+#define MPI2_RDPQ_DEPTH_MIN                     (16)
+
+/* Reply Descriptor Post Queue Array Entry */
+typedef struct _MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY {
+	U64                 RDPQBaseAddress;                    /* 0x00 */
+	U32                 Reserved1;                          /* 0x08 */
+	U32                 Reserved2;                          /* 0x0C */
+} MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY,
+*PTR_MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY,
+Mpi2IOCInitRDPQArrayEntry, *pMpi2IOCInitRDPQArrayEntry;
+
+
+/*IOCInit Reply message */
+typedef struct _MPI2_IOC_INIT_REPLY {
+	U8 WhoInit;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Reserved5;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+} MPI2_IOC_INIT_REPLY, *PTR_MPI2_IOC_INIT_REPLY,
+	Mpi2IOCInitReply_t, *pMpi2IOCInitReply_t;
+
+/****************************************************************************
+* IOCFacts message
+****************************************************************************/
+
+/*IOCFacts Request message */
+typedef struct _MPI2_IOC_FACTS_REQUEST {
+	U16 Reserved1;		/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+} MPI2_IOC_FACTS_REQUEST, *PTR_MPI2_IOC_FACTS_REQUEST,
+	Mpi2IOCFactsRequest_t, *pMpi2IOCFactsRequest_t;
+
+/*IOCFacts Reply message */
+typedef struct _MPI2_IOC_FACTS_REPLY {
+	U16 MsgVersion;		/*0x00 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 HeaderVersion;	/*0x04 */
+	U8 IOCNumber;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved1;		/*0x0A */
+	U16 IOCExceptions;	/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U8 MaxChainDepth;	/*0x14 */
+	U8 WhoInit;		/*0x15 */
+	U8 NumberOfPorts;	/*0x16 */
+	U8 MaxMSIxVectors;	/*0x17 */
+	U16 RequestCredit;	/*0x18 */
+	U16 ProductID;		/*0x1A */
+	U32 IOCCapabilities;	/*0x1C */
+	MPI2_VERSION_UNION FWVersion;	/*0x20 */
+	U16 IOCRequestFrameSize;	/*0x24 */
+	U16 IOCMaxChainSegmentSize;	/*0x26 */
+	U16 MaxInitiators;	/*0x28 */
+	U16 MaxTargets;		/*0x2A */
+	U16 MaxSasExpanders;	/*0x2C */
+	U16 MaxEnclosures;	/*0x2E */
+	U16 ProtocolFlags;	/*0x30 */
+	U16 HighPriorityCredit;	/*0x32 */
+	U16 MaxReplyDescriptorPostQueueDepth;	/*0x34 */
+	U8 ReplyFrameSize;	/*0x36 */
+	U8 MaxVolumes;		/*0x37 */
+	U16 MaxDevHandle;	/*0x38 */
+	U16 MaxPersistentEntries;	/*0x3A */
+	U16 MinDevHandle;	/*0x3C */
+	U8 CurrentHostPageSize;	/* 0x3E */
+	U8 Reserved4;		/* 0x3F */
+	U8 SGEModifierMask;	/*0x40 */
+	U8 SGEModifierValue;	/*0x41 */
+	U8 SGEModifierShift;	/*0x42 */
+	U8 Reserved5;		/*0x43 */
+} MPI2_IOC_FACTS_REPLY, *PTR_MPI2_IOC_FACTS_REPLY,
+	Mpi2IOCFactsReply_t, *pMpi2IOCFactsReply_t;
+
+/*MsgVersion */
+#define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK             (0xFF00)
+#define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT            (8)
+#define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK             (0x00FF)
+#define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT            (0)
+
+/*HeaderVersion */
+#define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK              (0xFF00)
+#define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT             (8)
+#define MPI2_IOCFACTS_HDRVERSION_DEV_MASK               (0x00FF)
+#define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT              (0)
+
+/*IOCExceptions */
+#define MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED              (0x0400)
+#define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE     (0x0200)
+#define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX      (0x0100)
+
+#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK              (0x00E0)
+#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD              (0x0000)
+#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP            (0x0020)
+#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED          (0x0040)
+#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP    (0x0060)
+
+#define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED       (0x0010)
+#define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL     (0x0008)
+#define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL           (0x0004)
+#define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID        (0x0002)
+#define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL       (0x0001)
+
+/*defines for WhoInit field are after the IOCInit Request */
+
+/*ProductID field uses MPI2_FW_HEADER_PID_ */
+
+/*IOCCapabilities */
+#define MPI26_IOCFACTS_CAPABILITY_COREDUMP_ENABLED      (0x00200000)
+#define MPI26_IOCFACTS_CAPABILITY_PCIE_SRIOV            (0x00100000)
+#define MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ            (0x00080000)
+#define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE     (0x00040000)
+#define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE     (0x00020000)
+#define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY   (0x00010000)
+#define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX            (0x00008000)
+#define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR       (0x00004000)
+#define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY           (0x00002000)
+#define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID        (0x00001000)
+#define MPI2_IOCFACTS_CAPABILITY_TLR                    (0x00000800)
+#define MPI2_IOCFACTS_CAPABILITY_MULTICAST              (0x00000100)
+#define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET   (0x00000080)
+#define MPI2_IOCFACTS_CAPABILITY_EEDP                   (0x00000040)
+#define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER        (0x00000020)
+#define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER        (0x00000010)
+#define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER      (0x00000008)
+#define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004)
+
+/*ProtocolFlags */
+#define MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES             (0x0008)
+#define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR           (0x0002)
+#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET              (0x0001)
+
+/****************************************************************************
+* PortFacts message
+****************************************************************************/
+
+/*PortFacts Request message */
+typedef struct _MPI2_PORT_FACTS_REQUEST {
+	U16 Reserved1;		/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 PortNumber;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved3;		/*0x0A */
+} MPI2_PORT_FACTS_REQUEST, *PTR_MPI2_PORT_FACTS_REQUEST,
+	Mpi2PortFactsRequest_t, *pMpi2PortFactsRequest_t;
+
+/*PortFacts Reply message */
+typedef struct _MPI2_PORT_FACTS_REPLY {
+	U16 Reserved1;		/*0x00 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 PortNumber;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved3;		/*0x0A */
+	U16 Reserved4;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U8 Reserved5;		/*0x14 */
+	U8 PortType;		/*0x15 */
+	U16 Reserved6;		/*0x16 */
+	U16 MaxPostedCmdBuffers;	/*0x18 */
+	U16 Reserved7;		/*0x1A */
+} MPI2_PORT_FACTS_REPLY, *PTR_MPI2_PORT_FACTS_REPLY,
+	Mpi2PortFactsReply_t, *pMpi2PortFactsReply_t;
+
+/*PortType values */
+#define MPI2_PORTFACTS_PORTTYPE_INACTIVE            (0x00)
+#define MPI2_PORTFACTS_PORTTYPE_FC                  (0x10)
+#define MPI2_PORTFACTS_PORTTYPE_ISCSI               (0x20)
+#define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL        (0x30)
+#define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL         (0x31)
+#define MPI2_PORTFACTS_PORTTYPE_TRI_MODE            (0x40)
+
+
+/****************************************************************************
+* PortEnable message
+****************************************************************************/
+
+/*PortEnable Request message */
+typedef struct _MPI2_PORT_ENABLE_REQUEST {
+	U16 Reserved1;		/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U8 Reserved2;		/*0x04 */
+	U8 PortFlags;		/*0x05 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+} MPI2_PORT_ENABLE_REQUEST, *PTR_MPI2_PORT_ENABLE_REQUEST,
+	Mpi2PortEnableRequest_t, *pMpi2PortEnableRequest_t;
+
+/*PortEnable Reply message */
+typedef struct _MPI2_PORT_ENABLE_REPLY {
+	U16 Reserved1;		/*0x00 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U8 Reserved2;		/*0x04 */
+	U8 PortFlags;		/*0x05 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Reserved5;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+} MPI2_PORT_ENABLE_REPLY, *PTR_MPI2_PORT_ENABLE_REPLY,
+	Mpi2PortEnableReply_t, *pMpi2PortEnableReply_t;
+
+/****************************************************************************
+* EventNotification message
+****************************************************************************/
+
+/*EventNotification Request message */
+#define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS           (4)
+
+typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST {
+	U16 Reserved1;		/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U32 Reserved5;		/*0x0C */
+	U32 Reserved6;		/*0x10 */
+	U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];	/*0x14 */
+	U16 SASBroadcastPrimitiveMasks;	/*0x24 */
+	U16 SASNotifyPrimitiveMasks;	/*0x26 */
+	U32 Reserved8;		/*0x28 */
+} MPI2_EVENT_NOTIFICATION_REQUEST,
+	*PTR_MPI2_EVENT_NOTIFICATION_REQUEST,
+	Mpi2EventNotificationRequest_t,
+	*pMpi2EventNotificationRequest_t;
+
+/*EventNotification Reply message */
+typedef struct _MPI2_EVENT_NOTIFICATION_REPLY {
+	U16 EventDataLength;	/*0x00 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved1;		/*0x04 */
+	U8 AckRequired;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved2;		/*0x0A */
+	U16 Reserved3;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U16 Event;		/*0x14 */
+	U16 Reserved4;		/*0x16 */
+	U32 EventContext;	/*0x18 */
+	U32 EventData[];	/*0x1C */
+} MPI2_EVENT_NOTIFICATION_REPLY, *PTR_MPI2_EVENT_NOTIFICATION_REPLY,
+	Mpi2EventNotificationReply_t,
+	*pMpi2EventNotificationReply_t;
+
+/*AckRequired */
+#define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED    (0x00)
+#define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED        (0x01)
+
+/*Event */
+#define MPI2_EVENT_LOG_DATA                         (0x0001)
+#define MPI2_EVENT_STATE_CHANGE                     (0x0002)
+#define MPI2_EVENT_HARD_RESET_RECEIVED              (0x0005)
+#define MPI2_EVENT_EVENT_CHANGE                     (0x000A)
+#define MPI2_EVENT_TASK_SET_FULL                    (0x000E)	/*obsolete */
+#define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE         (0x000F)
+#define MPI2_EVENT_IR_OPERATION_STATUS              (0x0014)
+#define MPI2_EVENT_SAS_DISCOVERY                    (0x0016)
+#define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE          (0x0017)
+#define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE    (0x0018)
+#define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW          (0x0019)
+#define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST         (0x001C)
+#define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE    (0x001D)
+#define MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE        (0x001D)
+#define MPI2_EVENT_IR_VOLUME                        (0x001E)
+#define MPI2_EVENT_IR_PHYSICAL_DISK                 (0x001F)
+#define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST     (0x0020)
+#define MPI2_EVENT_LOG_ENTRY_ADDED                  (0x0021)
+#define MPI2_EVENT_SAS_PHY_COUNTER                  (0x0022)
+#define MPI2_EVENT_GPIO_INTERRUPT                   (0x0023)
+#define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY         (0x0024)
+#define MPI2_EVENT_SAS_QUIESCE                      (0x0025)
+#define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE             (0x0026)
+#define MPI2_EVENT_TEMP_THRESHOLD                   (0x0027)
+#define MPI2_EVENT_HOST_MESSAGE                     (0x0028)
+#define MPI2_EVENT_POWER_PERFORMANCE_CHANGE         (0x0029)
+#define MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE        (0x0030)
+#define MPI2_EVENT_PCIE_ENUMERATION                 (0x0031)
+#define MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST        (0x0032)
+#define MPI2_EVENT_PCIE_LINK_COUNTER                (0x0033)
+#define MPI2_EVENT_ACTIVE_CABLE_EXCEPTION           (0x0034)
+#define MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR       (0x0035)
+#define MPI2_EVENT_MIN_PRODUCT_SPECIFIC             (0x006E)
+#define MPI2_EVENT_MAX_PRODUCT_SPECIFIC             (0x007F)
+
+/*Log Entry Added Event data */
+
+/*the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */
+#define MPI2_EVENT_DATA_LOG_DATA_LENGTH             (0x1C)
+
+typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED {
+	U64 TimeStamp;		/*0x00 */
+	U32 Reserved1;		/*0x08 */
+	U16 LogSequence;	/*0x0C */
+	U16 LogEntryQualifier;	/*0x0E */
+	U8 VP_ID;		/*0x10 */
+	U8 VF_ID;		/*0x11 */
+	U16 Reserved2;		/*0x12 */
+	U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH];	/*0x14 */
+} MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
+	*PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
+	Mpi2EventDataLogEntryAdded_t,
+	*pMpi2EventDataLogEntryAdded_t;
+
+/*GPIO Interrupt Event data */
+
+typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT {
+	U8 GPIONum;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U16 Reserved2;		/*0x02 */
+} MPI2_EVENT_DATA_GPIO_INTERRUPT,
+	*PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT,
+	Mpi2EventDataGpioInterrupt_t,
+	*pMpi2EventDataGpioInterrupt_t;
+
+/*Temperature Threshold Event data */
+
+typedef struct _MPI2_EVENT_DATA_TEMPERATURE {
+	U16 Status;		/*0x00 */
+	U8 SensorNum;		/*0x02 */
+	U8 Reserved1;		/*0x03 */
+	U16 CurrentTemperature;	/*0x04 */
+	U16 Reserved2;		/*0x06 */
+	U32 Reserved3;		/*0x08 */
+	U32 Reserved4;		/*0x0C */
+} MPI2_EVENT_DATA_TEMPERATURE,
+	*PTR_MPI2_EVENT_DATA_TEMPERATURE,
+	Mpi2EventDataTemperature_t, *pMpi2EventDataTemperature_t;
+
+/*Temperature Threshold Event data Status bits */
+#define MPI2_EVENT_TEMPERATURE3_EXCEEDED            (0x0008)
+#define MPI2_EVENT_TEMPERATURE2_EXCEEDED            (0x0004)
+#define MPI2_EVENT_TEMPERATURE1_EXCEEDED            (0x0002)
+#define MPI2_EVENT_TEMPERATURE0_EXCEEDED            (0x0001)
+
+/*Host Message Event data */
+
+typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE {
+	U8 SourceVF_ID;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U16 Reserved2;		/*0x02 */
+	U32 Reserved3;		/*0x04 */
+	U32 HostData[];		/*0x08 */
+} MPI2_EVENT_DATA_HOST_MESSAGE, *PTR_MPI2_EVENT_DATA_HOST_MESSAGE,
+	Mpi2EventDataHostMessage_t, *pMpi2EventDataHostMessage_t;
+
+/*Power Performance Change Event data */
+
+typedef struct _MPI2_EVENT_DATA_POWER_PERF_CHANGE {
+	U8 CurrentPowerMode;	/*0x00 */
+	U8 PreviousPowerMode;	/*0x01 */
+	U16 Reserved1;		/*0x02 */
+} MPI2_EVENT_DATA_POWER_PERF_CHANGE,
+	*PTR_MPI2_EVENT_DATA_POWER_PERF_CHANGE,
+	Mpi2EventDataPowerPerfChange_t,
+	*pMpi2EventDataPowerPerfChange_t;
+
+/*defines for CurrentPowerMode and PreviousPowerMode fields */
+#define MPI2_EVENT_PM_INIT_MASK              (0xC0)
+#define MPI2_EVENT_PM_INIT_UNAVAILABLE       (0x00)
+#define MPI2_EVENT_PM_INIT_HOST              (0x40)
+#define MPI2_EVENT_PM_INIT_IO_UNIT           (0x80)
+#define MPI2_EVENT_PM_INIT_PCIE_DPA          (0xC0)
+
+#define MPI2_EVENT_PM_MODE_MASK              (0x07)
+#define MPI2_EVENT_PM_MODE_UNAVAILABLE       (0x00)
+#define MPI2_EVENT_PM_MODE_UNKNOWN           (0x01)
+#define MPI2_EVENT_PM_MODE_FULL_POWER        (0x04)
+#define MPI2_EVENT_PM_MODE_REDUCED_POWER     (0x05)
+#define MPI2_EVENT_PM_MODE_STANDBY           (0x06)
+
+/* Active Cable Exception Event data */
+
+typedef struct _MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT {
+	U32         ActiveCablePowerRequirement;        /* 0x00 */
+	U8          ReasonCode;                         /* 0x04 */
+	U8          ReceptacleID;                       /* 0x05 */
+	U16         Reserved1;                          /* 0x06 */
+} MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
+	*PTR_MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
+	Mpi25EventDataActiveCableExcept_t,
+	*pMpi25EventDataActiveCableExcept_t,
+	MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
+	*PTR_MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
+	Mpi26EventDataActiveCableExcept_t,
+	*pMpi26EventDataActiveCableExcept_t;
+
+/*MPI2.5 defines for the ReasonCode field */
+#define MPI25_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER     (0x00)
+#define MPI25_EVENT_ACTIVE_CABLE_PRESENT                (0x01)
+#define MPI25_EVENT_ACTIVE_CABLE_DEGRADED               (0x02)
+
+/* defines for ReasonCode field */
+#define MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER     (0x00)
+#define MPI26_EVENT_ACTIVE_CABLE_PRESENT                (0x01)
+#define MPI26_EVENT_ACTIVE_CABLE_DEGRADED               (0x02)
+
+/*Hard Reset Received Event data */
+
+typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED {
+	U8 Reserved1;		/*0x00 */
+	U8 Port;		/*0x01 */
+	U16 Reserved2;		/*0x02 */
+} MPI2_EVENT_DATA_HARD_RESET_RECEIVED,
+	*PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED,
+	Mpi2EventDataHardResetReceived_t,
+	*pMpi2EventDataHardResetReceived_t;
+
+/*Task Set Full Event data */
+/*  this event is obsolete */
+
+typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL {
+	U16 DevHandle;		/*0x00 */
+	U16 CurrentDepth;	/*0x02 */
+} MPI2_EVENT_DATA_TASK_SET_FULL, *PTR_MPI2_EVENT_DATA_TASK_SET_FULL,
+	Mpi2EventDataTaskSetFull_t, *pMpi2EventDataTaskSetFull_t;
+
+/*SAS Device Status Change Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE {
+	U16 TaskTag;		/*0x00 */
+	U8 ReasonCode;		/*0x02 */
+	U8 PhysicalPort;	/*0x03 */
+	U8 ASC;			/*0x04 */
+	U8 ASCQ;		/*0x05 */
+	U16 DevHandle;		/*0x06 */
+	U32 Reserved2;		/*0x08 */
+	U64 SASAddress;		/*0x0C */
+	U8 LUN[8];		/*0x14 */
+} MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
+	*PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
+	Mpi2EventDataSasDeviceStatusChange_t,
+	*pMpi2EventDataSasDeviceStatusChange_t;
+
+/*SAS Device Status Change Event data ReasonCode values */
+#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA                           (0x05)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED                          (0x07)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET                (0x08)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL                  (0x09)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL              (0x0A)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL              (0x0B)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL                  (0x0C)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION                   (0x0D)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET               (0x0E)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL              (0x0F)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE                    (0x10)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY       (0x11)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY   (0x12)
+
+/*Integrated RAID Operation Status Event data */
+
+typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS {
+	U16 VolDevHandle;	/*0x00 */
+	U16 Reserved1;		/*0x02 */
+	U8 RAIDOperation;	/*0x04 */
+	U8 PercentComplete;	/*0x05 */
+	U16 Reserved2;		/*0x06 */
+	U32 ElapsedSeconds;	/*0x08 */
+} MPI2_EVENT_DATA_IR_OPERATION_STATUS,
+	*PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS,
+	Mpi2EventDataIrOperationStatus_t,
+	*pMpi2EventDataIrOperationStatus_t;
+
+/*Integrated RAID Operation Status Event data RAIDOperation values */
+#define MPI2_EVENT_IR_RAIDOP_RESYNC                     (0x00)
+#define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION       (0x01)
+#define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK          (0x02)
+#define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT            (0x03)
+#define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT       (0x04)
+
+/*Integrated RAID Volume Event data */
+
+typedef struct _MPI2_EVENT_DATA_IR_VOLUME {
+	U16 VolDevHandle;	/*0x00 */
+	U8 ReasonCode;		/*0x02 */
+	U8 Reserved1;		/*0x03 */
+	U32 NewValue;		/*0x04 */
+	U32 PreviousValue;	/*0x08 */
+} MPI2_EVENT_DATA_IR_VOLUME, *PTR_MPI2_EVENT_DATA_IR_VOLUME,
+	Mpi2EventDataIrVolume_t, *pMpi2EventDataIrVolume_t;
+
+/*Integrated RAID Volume Event data ReasonCode values */
+#define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED        (0x01)
+#define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED    (0x02)
+#define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED           (0x03)
+
+/*Integrated RAID Physical Disk Event data */
+
+typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK {
+	U16 Reserved1;		/*0x00 */
+	U8 ReasonCode;		/*0x02 */
+	U8 PhysDiskNum;		/*0x03 */
+	U16 PhysDiskDevHandle;	/*0x04 */
+	U16 Reserved2;		/*0x06 */
+	U16 Slot;		/*0x08 */
+	U16 EnclosureHandle;	/*0x0A */
+	U32 NewValue;		/*0x0C */
+	U32 PreviousValue;	/*0x10 */
+} MPI2_EVENT_DATA_IR_PHYSICAL_DISK,
+	*PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK,
+	Mpi2EventDataIrPhysicalDisk_t,
+	*pMpi2EventDataIrPhysicalDisk_t;
+
+/*Integrated RAID Physical Disk Event data ReasonCode values */
+#define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED      (0x01)
+#define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED  (0x02)
+#define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED         (0x03)
+
+/*Integrated RAID Configuration Change List Event data */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check NumElements at runtime.
+ */
+#ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT
+#define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT          (1)
+#endif
+
+typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT {
+	U16 ElementFlags;	/*0x00 */
+	U16 VolDevHandle;	/*0x02 */
+	U8 ReasonCode;		/*0x04 */
+	U8 PhysDiskNum;		/*0x05 */
+	U16 PhysDiskDevHandle;	/*0x06 */
+} MPI2_EVENT_IR_CONFIG_ELEMENT, *PTR_MPI2_EVENT_IR_CONFIG_ELEMENT,
+	Mpi2EventIrConfigElement_t, *pMpi2EventIrConfigElement_t;
+
+/*IR Configuration Change List Event data ElementFlags values */
+#define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK   (0x000F)
+#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT      (0x0000)
+#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001)
+#define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT    (0x0002)
+
+/*IR Configuration Change List Event data ReasonCode values */
+#define MPI2_EVENT_IR_CHANGE_RC_ADDED                   (0x01)
+#define MPI2_EVENT_IR_CHANGE_RC_REMOVED                 (0x02)
+#define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE               (0x03)
+#define MPI2_EVENT_IR_CHANGE_RC_HIDE                    (0x04)
+#define MPI2_EVENT_IR_CHANGE_RC_UNHIDE                  (0x05)
+#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED          (0x06)
+#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED          (0x07)
+#define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED              (0x08)
+#define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED              (0x09)
+
+typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST {
+	U8 NumElements;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 Reserved2;		/*0x02 */
+	U8 ConfigNum;		/*0x03 */
+	U32 Flags;		/*0x04 */
+	MPI2_EVENT_IR_CONFIG_ELEMENT
+		ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT];/*0x08 */
+} MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
+	*PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
+	Mpi2EventDataIrConfigChangeList_t,
+	*pMpi2EventDataIrConfigChangeList_t;
+
+/*IR Configuration Change List Event data Flags values */
+#define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG   (0x00000001)
+
+/*SAS Discovery Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY {
+	U8 Flags;		/*0x00 */
+	U8 ReasonCode;		/*0x01 */
+	U8 PhysicalPort;	/*0x02 */
+	U8 Reserved1;		/*0x03 */
+	U32 DiscoveryStatus;	/*0x04 */
+} MPI2_EVENT_DATA_SAS_DISCOVERY,
+	*PTR_MPI2_EVENT_DATA_SAS_DISCOVERY,
+	Mpi2EventDataSasDiscovery_t, *pMpi2EventDataSasDiscovery_t;
+
+/*SAS Discovery Event data Flags values */
+#define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE                   (0x02)
+#define MPI2_EVENT_SAS_DISC_IN_PROGRESS                     (0x01)
+
+/*SAS Discovery Event data ReasonCode values */
+#define MPI2_EVENT_SAS_DISC_RC_STARTED                      (0x01)
+#define MPI2_EVENT_SAS_DISC_RC_COMPLETED                    (0x02)
+
+/*SAS Discovery Event data DiscoveryStatus values */
+#define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED            (0x80000000)
+#define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED             (0x40000000)
+#define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED               (0x20000000)
+#define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED             (0x10000000)
+#define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR             (0x08000000)
+#define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE    (0x00008000)
+#define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE            (0x00004000)
+#define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN                (0x00002000)
+#define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK        (0x00001000)
+#define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE               (0x00000800)
+#define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK                       (0x00000400)
+#define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK                 (0x00000200)
+#define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR                    (0x00000100)
+#define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED              (0x00000080)
+#define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST                  (0x00000040)
+#define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES                (0x00000020)
+#define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT                      (0x00000010)
+#define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS                   (0x00000004)
+#define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE             (0x00000002)
+#define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED                    (0x00000001)
+
+/*SAS Broadcast Primitive Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE {
+	U8 PhyNum;		/*0x00 */
+	U8 Port;		/*0x01 */
+	U8 PortWidth;		/*0x02 */
+	U8 Primitive;		/*0x03 */
+} MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
+	*PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
+	Mpi2EventDataSasBroadcastPrimitive_t,
+	*pMpi2EventDataSasBroadcastPrimitive_t;
+
+/*defines for the Primitive field */
+#define MPI2_EVENT_PRIMITIVE_CHANGE                         (0x01)
+#define MPI2_EVENT_PRIMITIVE_SES                            (0x02)
+#define MPI2_EVENT_PRIMITIVE_EXPANDER                       (0x03)
+#define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT             (0x04)
+#define MPI2_EVENT_PRIMITIVE_RESERVED3                      (0x05)
+#define MPI2_EVENT_PRIMITIVE_RESERVED4                      (0x06)
+#define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED               (0x07)
+#define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED               (0x08)
+
+/*SAS Notify Primitive Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE {
+	U8 PhyNum;		/*0x00 */
+	U8 Port;		/*0x01 */
+	U8 Reserved1;		/*0x02 */
+	U8 Primitive;		/*0x03 */
+} MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
+	*PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
+	Mpi2EventDataSasNotifyPrimitive_t,
+	*pMpi2EventDataSasNotifyPrimitive_t;
+
+/*defines for the Primitive field */
+#define MPI2_EVENT_NOTIFY_ENABLE_SPINUP                     (0x01)
+#define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED               (0x02)
+#define MPI2_EVENT_NOTIFY_RESERVED1                         (0x03)
+#define MPI2_EVENT_NOTIFY_RESERVED2                         (0x04)
+
+/*SAS Initiator Device Status Change Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE {
+	U8 ReasonCode;		/*0x00 */
+	U8 PhysicalPort;	/*0x01 */
+	U16 DevHandle;		/*0x02 */
+	U64 SASAddress;		/*0x04 */
+} MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
+	*PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
+	Mpi2EventDataSasInitDevStatusChange_t,
+	*pMpi2EventDataSasInitDevStatusChange_t;
+
+/*SAS Initiator Device Status Change event ReasonCode values */
+#define MPI2_EVENT_SAS_INIT_RC_ADDED                (0x01)
+#define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING       (0x02)
+
+/*SAS Initiator Device Table Overflow Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW {
+	U16 MaxInit;		/*0x00 */
+	U16 CurrentInit;	/*0x02 */
+	U64 SASAddress;		/*0x04 */
+} MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
+	*PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
+	Mpi2EventDataSasInitTableOverflow_t,
+	*pMpi2EventDataSasInitTableOverflow_t;
+
+/*SAS Topology Change List Event data */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check NumEntries at runtime.
+ */
+#ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT
+#define MPI2_EVENT_SAS_TOPO_PHY_COUNT           (1)
+#endif
+
+typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY {
+	U16 AttachedDevHandle;	/*0x00 */
+	U8 LinkRate;		/*0x02 */
+	U8 PhyStatus;		/*0x03 */
+} MPI2_EVENT_SAS_TOPO_PHY_ENTRY, *PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY,
+	Mpi2EventSasTopoPhyEntry_t, *pMpi2EventSasTopoPhyEntry_t;
+
+typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST {
+	U16 EnclosureHandle;	/*0x00 */
+	U16 ExpanderDevHandle;	/*0x02 */
+	U8 NumPhys;		/*0x04 */
+	U8 Reserved1;		/*0x05 */
+	U16 Reserved2;		/*0x06 */
+	U8 NumEntries;		/*0x08 */
+	U8 StartPhyNum;		/*0x09 */
+	U8 ExpStatus;		/*0x0A */
+	U8 PhysicalPort;	/*0x0B */
+	MPI2_EVENT_SAS_TOPO_PHY_ENTRY
+	PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT];	/*0x0C */
+} MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
+	*PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
+	Mpi2EventDataSasTopologyChangeList_t,
+	*pMpi2EventDataSasTopologyChangeList_t;
+
+/*values for the ExpStatus field */
+#define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER                  (0x00)
+#define MPI2_EVENT_SAS_TOPO_ES_ADDED                        (0x01)
+#define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING               (0x02)
+#define MPI2_EVENT_SAS_TOPO_ES_RESPONDING                   (0x03)
+#define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING         (0x04)
+
+/*defines for the LinkRate field */
+#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK                 (0xF0)
+#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT                (4)
+#define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK                    (0x0F)
+#define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT                   (0)
+
+#define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE            (0x00)
+#define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED                 (0x01)
+#define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED           (0x02)
+#define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE            (0x03)
+#define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR                (0x04)
+#define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS        (0x05)
+#define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY              (0x06)
+#define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5                     (0x08)
+#define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0                     (0x09)
+#define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0                     (0x0A)
+#define MPI25_EVENT_SAS_TOPO_LR_RATE_12_0                   (0x0B)
+#define MPI26_EVENT_SAS_TOPO_LR_RATE_22_5                   (0x0C)
+
+/*values for the PhyStatus field */
+#define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT                (0x80)
+#define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE             (0x10)
+/*values for the PhyStatus ReasonCode sub-field */
+#define MPI2_EVENT_SAS_TOPO_RC_MASK                         (0x0F)
+#define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED                   (0x01)
+#define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING          (0x02)
+#define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED                  (0x03)
+#define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE                    (0x04)
+#define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING         (0x05)
+
+/*SAS Enclosure Device Status Change Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE {
+	U16 EnclosureHandle;	/*0x00 */
+	U8 ReasonCode;		/*0x02 */
+	U8 PhysicalPort;	/*0x03 */
+	U64 EnclosureLogicalID;	/*0x04 */
+	U16 NumSlots;		/*0x0C */
+	U16 StartSlot;		/*0x0E */
+	U32 PhyBits;		/*0x10 */
+} MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
+	*PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
+	Mpi2EventDataSasEnclDevStatusChange_t,
+	*pMpi2EventDataSasEnclDevStatusChange_t,
+	MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE,
+	*PTR_MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE,
+	Mpi26EventDataEnclDevStatusChange_t,
+	*pMpi26EventDataEnclDevStatusChange_t;
+
+/*SAS Enclosure Device Status Change event ReasonCode values */
+#define MPI2_EVENT_SAS_ENCL_RC_ADDED                (0x01)
+#define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING       (0x02)
+
+/*Enclosure Device Status Change event ReasonCode values */
+#define MPI26_EVENT_ENCL_RC_ADDED                   (0x01)
+#define MPI26_EVENT_ENCL_RC_NOT_RESPONDING          (0x02)
+
+
+typedef struct _MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR {
+	U16	DevHandle;                  /*0x00 */
+	U8	ReasonCode;                 /*0x02 */
+	U8	PhysicalPort;               /*0x03 */
+	U32	Reserved1[2];               /*0x04 */
+	U64	SASAddress;                 /*0x0C */
+	U32	Reserved2[2];               /*0x14 */
+} MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR,
+	*PTR_MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR,
+	Mpi25EventDataSasDeviceDiscoveryError_t,
+	*pMpi25EventDataSasDeviceDiscoveryError_t;
+
+/*SAS Device Discovery Error Event data ReasonCode values */
+#define MPI25_EVENT_SAS_DISC_ERR_SMP_FAILED         (0x01)
+#define MPI25_EVENT_SAS_DISC_ERR_SMP_TIMEOUT        (0x02)
+
+/*SAS PHY Counter Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER {
+	U64 TimeStamp;		/*0x00 */
+	U32 Reserved1;		/*0x08 */
+	U8 PhyEventCode;	/*0x0C */
+	U8 PhyNum;		/*0x0D */
+	U16 Reserved2;		/*0x0E */
+	U32 PhyEventInfo;	/*0x10 */
+	U8 CounterType;		/*0x14 */
+	U8 ThresholdWindow;	/*0x15 */
+	U8 TimeUnits;		/*0x16 */
+	U8 Reserved3;		/*0x17 */
+	U32 EventThreshold;	/*0x18 */
+	U16 ThresholdFlags;	/*0x1C */
+	U16 Reserved4;		/*0x1E */
+} MPI2_EVENT_DATA_SAS_PHY_COUNTER,
+	*PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER,
+	Mpi2EventDataSasPhyCounter_t,
+	*pMpi2EventDataSasPhyCounter_t;
+
+/*use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h
+ *for the PhyEventCode field */
+
+/*use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h
+ *for the CounterType field */
+
+/*use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h
+ *for the TimeUnits field */
+
+/*use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h
+ *for the ThresholdFlags field */
+
+/*SAS Quiesce Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE {
+	U8 ReasonCode;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U16 Reserved2;		/*0x02 */
+	U32 Reserved3;		/*0x04 */
+} MPI2_EVENT_DATA_SAS_QUIESCE,
+	*PTR_MPI2_EVENT_DATA_SAS_QUIESCE,
+	Mpi2EventDataSasQuiesce_t, *pMpi2EventDataSasQuiesce_t;
+
+/*SAS Quiesce Event data ReasonCode values */
+#define MPI2_EVENT_SAS_QUIESCE_RC_STARTED                   (0x01)
+#define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED                 (0x02)
+
+/*Host Based Discovery Phy Event data */
+
+typedef struct _MPI2_EVENT_HBD_PHY_SAS {
+	U8 Flags;		/*0x00 */
+	U8 NegotiatedLinkRate;	/*0x01 */
+	U8 PhyNum;		/*0x02 */
+	U8 PhysicalPort;	/*0x03 */
+	U32 Reserved1;		/*0x04 */
+	U8 InitialFrame[28];	/*0x08 */
+} MPI2_EVENT_HBD_PHY_SAS, *PTR_MPI2_EVENT_HBD_PHY_SAS,
+	Mpi2EventHbdPhySas_t, *pMpi2EventHbdPhySas_t;
+
+/*values for the Flags field */
+#define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID        (0x02)
+#define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME         (0x01)
+
+/*use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h
+ *for the NegotiatedLinkRate field */
+
+typedef union _MPI2_EVENT_HBD_DESCRIPTOR {
+	MPI2_EVENT_HBD_PHY_SAS Sas;
+} MPI2_EVENT_HBD_DESCRIPTOR, *PTR_MPI2_EVENT_HBD_DESCRIPTOR,
+	Mpi2EventHbdDescriptor_t, *pMpi2EventHbdDescriptor_t;
+
+typedef struct _MPI2_EVENT_DATA_HBD_PHY {
+	U8 DescriptorType;	/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U16 Reserved2;		/*0x02 */
+	U32 Reserved3;		/*0x04 */
+	MPI2_EVENT_HBD_DESCRIPTOR Descriptor;	/*0x08 */
+} MPI2_EVENT_DATA_HBD_PHY, *PTR_MPI2_EVENT_DATA_HBD_PHY,
+	Mpi2EventDataHbdPhy_t,
+	*pMpi2EventDataMpi2EventDataHbdPhy_t;
+
+/*values for the DescriptorType field */
+#define MPI2_EVENT_HBD_DT_SAS               (0x01)
+
+
+/*PCIe Device Status Change Event data (MPI v2.6 and later) */
+
+typedef struct _MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE {
+	U16	TaskTag;                        /*0x00 */
+	U8	ReasonCode;                     /*0x02 */
+	U8	PhysicalPort;                   /*0x03 */
+	U8	ASC;                            /*0x04 */
+	U8	ASCQ;                           /*0x05 */
+	U16	DevHandle;                      /*0x06 */
+	U32	Reserved2;                      /*0x08 */
+	U64	WWID;                           /*0x0C */
+	U8	LUN[8];                         /*0x14 */
+} MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE,
+	*PTR_MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE,
+	Mpi26EventDataPCIeDeviceStatusChange_t,
+	*pMpi26EventDataPCIeDeviceStatusChange_t;
+
+/*PCIe Device Status Change Event data ReasonCode values */
+#define MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA                           (0x05)
+#define MPI26_EVENT_PCIDEV_STAT_RC_UNSUPPORTED                          (0x07)
+#define MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET                (0x08)
+#define MPI26_EVENT_PCIDEV_STAT_RC_TASK_ABORT_INTERNAL                  (0x09)
+#define MPI26_EVENT_PCIDEV_STAT_RC_ABORT_TASK_SET_INTERNAL              (0x0A)
+#define MPI26_EVENT_PCIDEV_STAT_RC_CLEAR_TASK_SET_INTERNAL              (0x0B)
+#define MPI26_EVENT_PCIDEV_STAT_RC_QUERY_TASK_INTERNAL                  (0x0C)
+#define MPI26_EVENT_PCIDEV_STAT_RC_ASYNC_NOTIFICATION                   (0x0D)
+#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET               (0x0E)
+#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_TASK_ABORT_INTERNAL              (0x0F)
+#define MPI26_EVENT_PCIDEV_STAT_RC_DEV_INIT_FAILURE                     (0x10)
+#define MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED                (0x11)
+
+
+/*PCIe Enumeration Event data (MPI v2.6 and later) */
+
+typedef struct _MPI26_EVENT_DATA_PCIE_ENUMERATION {
+	U8	Flags;                      /*0x00 */
+	U8	ReasonCode;                 /*0x01 */
+	U8	PhysicalPort;               /*0x02 */
+	U8	Reserved1;                  /*0x03 */
+	U32	EnumerationStatus;          /*0x04 */
+} MPI26_EVENT_DATA_PCIE_ENUMERATION,
+	*PTR_MPI26_EVENT_DATA_PCIE_ENUMERATION,
+	Mpi26EventDataPCIeEnumeration_t,
+	*pMpi26EventDataPCIeEnumeration_t;
+
+/*PCIe Enumeration Event data Flags values */
+#define MPI26_EVENT_PCIE_ENUM_DEVICE_CHANGE                 (0x02)
+#define MPI26_EVENT_PCIE_ENUM_IN_PROGRESS                   (0x01)
+
+/*PCIe Enumeration Event data ReasonCode values */
+#define MPI26_EVENT_PCIE_ENUM_RC_STARTED                    (0x01)
+#define MPI26_EVENT_PCIE_ENUM_RC_COMPLETED                  (0x02)
+
+/*PCIe Enumeration Event data EnumerationStatus values */
+#define MPI26_EVENT_PCIE_ENUM_ES_MAX_SWITCHES_EXCEED            (0x40000000)
+#define MPI26_EVENT_PCIE_ENUM_ES_MAX_DEVICES_EXCEED             (0x20000000)
+#define MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED            (0x10000000)
+
+
+/*PCIe Topology Change List Event data (MPI v2.6 and later) */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check NumEntries at runtime.
+ */
+#ifndef MPI26_EVENT_PCIE_TOPO_PORT_COUNT
+#define MPI26_EVENT_PCIE_TOPO_PORT_COUNT        (1)
+#endif
+
+typedef struct _MPI26_EVENT_PCIE_TOPO_PORT_ENTRY {
+	U16	AttachedDevHandle;      /*0x00 */
+	U8	PortStatus;             /*0x02 */
+	U8	Reserved1;              /*0x03 */
+	U8	CurrentPortInfo;        /*0x04 */
+	U8	Reserved2;              /*0x05 */
+	U8	PreviousPortInfo;       /*0x06 */
+	U8	Reserved3;              /*0x07 */
+} MPI26_EVENT_PCIE_TOPO_PORT_ENTRY,
+	*PTR_MPI26_EVENT_PCIE_TOPO_PORT_ENTRY,
+	Mpi26EventPCIeTopoPortEntry_t,
+	*pMpi26EventPCIeTopoPortEntry_t;
+
+/*PCIe Topology Change List Event data PortStatus values */
+#define MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED                  (0x01)
+#define MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING             (0x02)
+#define MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED               (0x03)
+#define MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE                  (0x04)
+#define MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING       (0x05)
+
+/*PCIe Topology Change List Event data defines for CurrentPortInfo and
+ *PreviousPortInfo
+ */
+#define MPI26_EVENT_PCIE_TOPO_PI_LANE_MASK                  (0xF0)
+#define MPI26_EVENT_PCIE_TOPO_PI_LANES_UNKNOWN              (0x00)
+#define MPI26_EVENT_PCIE_TOPO_PI_1_LANE                     (0x10)
+#define MPI26_EVENT_PCIE_TOPO_PI_2_LANES                    (0x20)
+#define MPI26_EVENT_PCIE_TOPO_PI_4_LANES                    (0x30)
+#define MPI26_EVENT_PCIE_TOPO_PI_8_LANES                    (0x40)
+#define MPI26_EVENT_PCIE_TOPO_PI_16_LANES                   (0x50)
+
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK                  (0x0F)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN               (0x00)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_DISABLED              (0x01)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5                   (0x02)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_5_0                   (0x03)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_8_0                   (0x04)
+#define MPI26_EVENT_PCIE_TOPO_PI_RATE_16_0                  (0x05)
+
+typedef struct _MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST {
+	U16	EnclosureHandle;        /*0x00 */
+	U16	SwitchDevHandle;        /*0x02 */
+	U8	NumPorts;               /*0x04 */
+	U8	Reserved1;              /*0x05 */
+	U16	Reserved2;              /*0x06 */
+	U8	NumEntries;             /*0x08 */
+	U8	StartPortNum;           /*0x09 */
+	U8	SwitchStatus;           /*0x0A */
+	U8	PhysicalPort;           /*0x0B */
+	MPI26_EVENT_PCIE_TOPO_PORT_ENTRY
+		PortEntry[MPI26_EVENT_PCIE_TOPO_PORT_COUNT]; /*0x0C */
+} MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST,
+	*PTR_MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST,
+	Mpi26EventDataPCIeTopologyChangeList_t,
+	*pMpi26EventDataPCIeTopologyChangeList_t;
+
+/*PCIe Topology Change List Event data SwitchStatus values */
+#define MPI26_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH             (0x00)
+#define MPI26_EVENT_PCIE_TOPO_SS_ADDED                      (0x01)
+#define MPI26_EVENT_PCIE_TOPO_SS_NOT_RESPONDING             (0x02)
+#define MPI26_EVENT_PCIE_TOPO_SS_RESPONDING                 (0x03)
+#define MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING       (0x04)
+
+/*PCIe Link Counter Event data (MPI v2.6 and later) */
+
+typedef struct _MPI26_EVENT_DATA_PCIE_LINK_COUNTER {
+	U64	TimeStamp;          /*0x00 */
+	U32	Reserved1;          /*0x08 */
+	U8	LinkEventCode;      /*0x0C */
+	U8	LinkNum;            /*0x0D */
+	U16	Reserved2;          /*0x0E */
+	U32	LinkEventInfo;      /*0x10 */
+	U8	CounterType;        /*0x14 */
+	U8	ThresholdWindow;    /*0x15 */
+	U8	TimeUnits;          /*0x16 */
+	U8	Reserved3;          /*0x17 */
+	U32	EventThreshold;     /*0x18 */
+	U16	ThresholdFlags;     /*0x1C */
+	U16	Reserved4;          /*0x1E */
+} MPI26_EVENT_DATA_PCIE_LINK_COUNTER,
+	*PTR_MPI26_EVENT_DATA_PCIE_LINK_COUNTER,
+	Mpi26EventDataPcieLinkCounter_t, *pMpi26EventDataPcieLinkCounter_t;
+
+
+/*use MPI26_PCIELINK3_EVTCODE_ values from mpi2_cnfg.h for the LinkEventCode
+ *field
+ */
+
+/*use MPI26_PCIELINK3_COUNTER_TYPE_ values from mpi2_cnfg.h for the CounterType
+ *field
+ */
+
+/*use MPI26_PCIELINK3_TIME_UNITS_ values from mpi2_cnfg.h for the TimeUnits
+ *field
+ */
+
+/*use MPI26_PCIELINK3_TFLAGS_ values from mpi2_cnfg.h for the ThresholdFlags
+ *field
+ */
+
+/****************************************************************************
+* EventAck message
+****************************************************************************/
+
+/*EventAck Request message */
+typedef struct _MPI2_EVENT_ACK_REQUEST {
+	U16 Reserved1;		/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Event;		/*0x0C */
+	U16 Reserved5;		/*0x0E */
+	U32 EventContext;	/*0x10 */
+} MPI2_EVENT_ACK_REQUEST, *PTR_MPI2_EVENT_ACK_REQUEST,
+	Mpi2EventAckRequest_t, *pMpi2EventAckRequest_t;
+
+/*EventAck Reply message */
+typedef struct _MPI2_EVENT_ACK_REPLY {
+	U16 Reserved1;		/*0x00 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Reserved5;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+} MPI2_EVENT_ACK_REPLY, *PTR_MPI2_EVENT_ACK_REPLY,
+	Mpi2EventAckReply_t, *pMpi2EventAckReply_t;
+
+/****************************************************************************
+* SendHostMessage message
+****************************************************************************/
+
+/*SendHostMessage Request message */
+typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST {
+	U16 HostDataLength;	/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved1;		/*0x04 */
+	U8 Reserved2;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved3;		/*0x0A */
+	U8 Reserved4;		/*0x0C */
+	U8 DestVF_ID;		/*0x0D */
+	U16 Reserved5;		/*0x0E */
+	U32 Reserved6;		/*0x10 */
+	U32 Reserved7;		/*0x14 */
+	U32 Reserved8;		/*0x18 */
+	U32 Reserved9;		/*0x1C */
+	U32 Reserved10;		/*0x20 */
+	U32 HostData[];		/*0x24 */
+} MPI2_SEND_HOST_MESSAGE_REQUEST,
+	*PTR_MPI2_SEND_HOST_MESSAGE_REQUEST,
+	Mpi2SendHostMessageRequest_t,
+	*pMpi2SendHostMessageRequest_t;
+
+/*SendHostMessage Reply message */
+typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY {
+	U16 HostDataLength;	/*0x00 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved1;		/*0x04 */
+	U8 Reserved2;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved3;		/*0x0A */
+	U16 Reserved4;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+} MPI2_SEND_HOST_MESSAGE_REPLY, *PTR_MPI2_SEND_HOST_MESSAGE_REPLY,
+	Mpi2SendHostMessageReply_t, *pMpi2SendHostMessageReply_t;
+
+/****************************************************************************
+* FWDownload message
+****************************************************************************/
+
+/*MPI v2.0 FWDownload Request message */
+typedef struct _MPI2_FW_DOWNLOAD_REQUEST {
+	U8 ImageType;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U32 TotalImageSize;	/*0x0C */
+	U32 Reserved5;		/*0x10 */
+	MPI2_MPI_SGE_UNION SGL;	/*0x14 */
+} MPI2_FW_DOWNLOAD_REQUEST, *PTR_MPI2_FW_DOWNLOAD_REQUEST,
+	Mpi2FWDownloadRequest, *pMpi2FWDownloadRequest;
+
+#define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT   (0x01)
+
+#define MPI2_FW_DOWNLOAD_ITYPE_FW                   (0x01)
+#define MPI2_FW_DOWNLOAD_ITYPE_BIOS                 (0x02)
+#define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING        (0x06)
+#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1             (0x07)
+#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2             (0x08)
+#define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID             (0x09)
+#define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE             (0x0A)
+#define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK    (0x0B)
+#define MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY           (0x0C)
+#define MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP           (0x0D)
+#define MPI2_FW_DOWNLOAD_ITYPE_SBR                  (0x0E)
+#define MPI2_FW_DOWNLOAD_ITYPE_SBR_BACKUP           (0x0F)
+#define MPI2_FW_DOWNLOAD_ITYPE_HIIM                 (0x10)
+#define MPI2_FW_DOWNLOAD_ITYPE_HIIA                 (0x11)
+#define MPI2_FW_DOWNLOAD_ITYPE_CTLR                 (0x12)
+#define MPI2_FW_DOWNLOAD_ITYPE_IMR_FIRMWARE         (0x13)
+#define MPI2_FW_DOWNLOAD_ITYPE_MR_NVDATA            (0x14)
+/*MPI v2.6 and newer */
+#define MPI2_FW_DOWNLOAD_ITYPE_CPLD                 (0x15)
+#define MPI2_FW_DOWNLOAD_ITYPE_PSOC                 (0x16)
+#define MPI2_FW_DOWNLOAD_ITYPE_COREDUMP             (0x17)
+#define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0)
+
+/*MPI v2.0 FWDownload TransactionContext Element */
+typedef struct _MPI2_FW_DOWNLOAD_TCSGE {
+	U8 Reserved1;		/*0x00 */
+	U8 ContextSize;		/*0x01 */
+	U8 DetailsLength;	/*0x02 */
+	U8 Flags;		/*0x03 */
+	U32 Reserved2;		/*0x04 */
+	U32 ImageOffset;	/*0x08 */
+	U32 ImageSize;		/*0x0C */
+} MPI2_FW_DOWNLOAD_TCSGE, *PTR_MPI2_FW_DOWNLOAD_TCSGE,
+	Mpi2FWDownloadTCSGE_t, *pMpi2FWDownloadTCSGE_t;
+
+/*MPI v2.5 FWDownload Request message */
+typedef struct _MPI25_FW_DOWNLOAD_REQUEST {
+	U8 ImageType;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U32 TotalImageSize;	/*0x0C */
+	U32 Reserved5;		/*0x10 */
+	U32 Reserved6;		/*0x14 */
+	U32 ImageOffset;	/*0x18 */
+	U32 ImageSize;		/*0x1C */
+	MPI25_SGE_IO_UNION SGL;	/*0x20 */
+} MPI25_FW_DOWNLOAD_REQUEST, *PTR_MPI25_FW_DOWNLOAD_REQUEST,
+	Mpi25FWDownloadRequest, *pMpi25FWDownloadRequest;
+
+/*FWDownload Reply message */
+typedef struct _MPI2_FW_DOWNLOAD_REPLY {
+	U8 ImageType;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Reserved5;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+} MPI2_FW_DOWNLOAD_REPLY, *PTR_MPI2_FW_DOWNLOAD_REPLY,
+	Mpi2FWDownloadReply_t, *pMpi2FWDownloadReply_t;
+
+/****************************************************************************
+* FWUpload message
+****************************************************************************/
+
+/*MPI v2.0 FWUpload Request message */
+typedef struct _MPI2_FW_UPLOAD_REQUEST {
+	U8 ImageType;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U32 Reserved5;		/*0x0C */
+	U32 Reserved6;		/*0x10 */
+	MPI2_MPI_SGE_UNION SGL;	/*0x14 */
+} MPI2_FW_UPLOAD_REQUEST, *PTR_MPI2_FW_UPLOAD_REQUEST,
+	Mpi2FWUploadRequest_t, *pMpi2FWUploadRequest_t;
+
+#define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT         (0x00)
+#define MPI2_FW_UPLOAD_ITYPE_FW_FLASH           (0x01)
+#define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH         (0x02)
+#define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP          (0x05)
+#define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING      (0x06)
+#define MPI2_FW_UPLOAD_ITYPE_CONFIG_1           (0x07)
+#define MPI2_FW_UPLOAD_ITYPE_CONFIG_2           (0x08)
+#define MPI2_FW_UPLOAD_ITYPE_MEGARAID           (0x09)
+#define MPI2_FW_UPLOAD_ITYPE_COMPLETE           (0x0A)
+#define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK  (0x0B)
+#define MPI2_FW_UPLOAD_ITYPE_CBB_BACKUP         (0x0D)
+#define MPI2_FW_UPLOAD_ITYPE_SBR                (0x0E)
+#define MPI2_FW_UPLOAD_ITYPE_SBR_BACKUP         (0x0F)
+#define MPI2_FW_UPLOAD_ITYPE_HIIM               (0x10)
+#define MPI2_FW_UPLOAD_ITYPE_HIIA               (0x11)
+#define MPI2_FW_UPLOAD_ITYPE_CTLR               (0x12)
+#define MPI2_FW_UPLOAD_ITYPE_IMR_FIRMWARE       (0x13)
+#define MPI2_FW_UPLOAD_ITYPE_MR_NVDATA          (0x14)
+
+
+/*MPI v2.0 FWUpload TransactionContext Element */
+typedef struct _MPI2_FW_UPLOAD_TCSGE {
+	U8 Reserved1;		/*0x00 */
+	U8 ContextSize;		/*0x01 */
+	U8 DetailsLength;	/*0x02 */
+	U8 Flags;		/*0x03 */
+	U32 Reserved2;		/*0x04 */
+	U32 ImageOffset;	/*0x08 */
+	U32 ImageSize;		/*0x0C */
+} MPI2_FW_UPLOAD_TCSGE, *PTR_MPI2_FW_UPLOAD_TCSGE,
+	Mpi2FWUploadTCSGE_t, *pMpi2FWUploadTCSGE_t;
+
+/*MPI v2.5 FWUpload Request message */
+typedef struct _MPI25_FW_UPLOAD_REQUEST {
+	U8 ImageType;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U32 Reserved5;		/*0x0C */
+	U32 Reserved6;		/*0x10 */
+	U32 Reserved7;		/*0x14 */
+	U32 ImageOffset;	/*0x18 */
+	U32 ImageSize;		/*0x1C */
+	MPI25_SGE_IO_UNION SGL;	/*0x20 */
+} MPI25_FW_UPLOAD_REQUEST, *PTR_MPI25_FW_UPLOAD_REQUEST,
+	Mpi25FWUploadRequest_t, *pMpi25FWUploadRequest_t;
+
+/*FWUpload Reply message */
+typedef struct _MPI2_FW_UPLOAD_REPLY {
+	U8 ImageType;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Reserved5;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U32 ActualImageSize;	/*0x14 */
+} MPI2_FW_UPLOAD_REPLY, *PTR_MPI2_FW_UPLOAD_REPLY,
+	Mpi2FWUploadReply_t, *pMPi2FWUploadReply_t;
+
+
+/****************************************************************************
+* PowerManagementControl message
+****************************************************************************/
+
+/*PowerManagementControl Request message */
+typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST {
+	U8 Feature;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U8 Parameter1;		/*0x0C */
+	U8 Parameter2;		/*0x0D */
+	U8 Parameter3;		/*0x0E */
+	U8 Parameter4;		/*0x0F */
+	U32 Reserved5;		/*0x10 */
+	U32 Reserved6;		/*0x14 */
+} MPI2_PWR_MGMT_CONTROL_REQUEST, *PTR_MPI2_PWR_MGMT_CONTROL_REQUEST,
+	Mpi2PwrMgmtControlRequest_t, *pMpi2PwrMgmtControlRequest_t;
+
+/*defines for the Feature field */
+#define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND       (0x01)
+#define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION   (0x02)
+#define MPI2_PM_CONTROL_FEATURE_PCIE_LINK               (0x03)	/*obsolete */
+#define MPI2_PM_CONTROL_FEATURE_IOC_SPEED               (0x04)
+#define MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE    (0x05)
+#define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC    (0x80)
+#define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC    (0xFF)
+
+/*parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */
+/*Parameter1 contains a PHY number */
+/*Parameter2 indicates power condition action using these defines */
+#define MPI2_PM_CONTROL_PARAM2_PARTIAL                  (0x01)
+#define MPI2_PM_CONTROL_PARAM2_SLUMBER                  (0x02)
+#define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT            (0x03)
+/*Parameter3 and Parameter4 are reserved */
+
+/*parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION
+ * Feature */
+/*Parameter1 contains SAS port width modulation group number */
+/*Parameter2 indicates IOC action using these defines */
+#define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP        (0x01)
+#define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION        (0x02)
+#define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP     (0x03)
+/*Parameter3 indicates desired modulation level using these defines */
+#define MPI2_PM_CONTROL_PARAM3_25_PERCENT               (0x00)
+#define MPI2_PM_CONTROL_PARAM3_50_PERCENT               (0x01)
+#define MPI2_PM_CONTROL_PARAM3_75_PERCENT               (0x02)
+#define MPI2_PM_CONTROL_PARAM3_100_PERCENT              (0x03)
+/*Parameter4 is reserved */
+
+/*this next set (_PCIE_LINK) is obsolete */
+/*parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */
+/*Parameter1 indicates desired PCIe link speed using these defines */
+#define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS            (0x00)	/*obsolete */
+#define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS            (0x01)	/*obsolete */
+#define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS            (0x02)	/*obsolete */
+/*Parameter2 indicates desired PCIe link width using these defines */
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X1                 (0x01)	/*obsolete */
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X2                 (0x02)	/*obsolete */
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X4                 (0x04)	/*obsolete */
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X8                 (0x08)	/*obsolete */
+/*Parameter3 and Parameter4 are reserved */
+
+/*parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */
+/*Parameter1 indicates desired IOC hardware clock speed using these defines */
+#define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED           (0x01)
+#define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED           (0x02)
+#define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED        (0x04)
+#define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED         (0x08)
+/*Parameter2, Parameter3, and Parameter4 are reserved */
+
+/*parameter usage for the MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE Feature*/
+/*Parameter1 indicates host action regarding global power management mode */
+#define MPI2_PM_CONTROL_PARAM1_TAKE_CONTROL             (0x01)
+#define MPI2_PM_CONTROL_PARAM1_CHANGE_GLOBAL_MODE       (0x02)
+#define MPI2_PM_CONTROL_PARAM1_RELEASE_CONTROL          (0x03)
+/*Parameter2 indicates the requested global power management mode */
+#define MPI2_PM_CONTROL_PARAM2_FULL_PWR_PERF            (0x01)
+#define MPI2_PM_CONTROL_PARAM2_REDUCED_PWR_PERF         (0x08)
+#define MPI2_PM_CONTROL_PARAM2_STANDBY                  (0x40)
+/*Parameter3 and Parameter4 are reserved */
+
+/*PowerManagementControl Reply message */
+typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY {
+	U8 Feature;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Reserved5;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+} MPI2_PWR_MGMT_CONTROL_REPLY, *PTR_MPI2_PWR_MGMT_CONTROL_REPLY,
+	Mpi2PwrMgmtControlReply_t, *pMpi2PwrMgmtControlReply_t;
+
+/****************************************************************************
+*  IO Unit Control messages (MPI v2.6 and later only.)
+****************************************************************************/
+
+/* IO Unit Control Request Message */
+typedef struct _MPI26_IOUNIT_CONTROL_REQUEST {
+	U8                      Operation;          /* 0x00 */
+	U8                      Reserved1;          /* 0x01 */
+	U8                      ChainOffset;        /* 0x02 */
+	U8                      Function;           /* 0x03 */
+	U16                     DevHandle;          /* 0x04 */
+	U8                      IOCParameter;       /* 0x06 */
+	U8                      MsgFlags;           /* 0x07 */
+	U8                      VP_ID;              /* 0x08 */
+	U8                      VF_ID;              /* 0x09 */
+	U16                     Reserved3;          /* 0x0A */
+	U16                     Reserved4;          /* 0x0C */
+	U8                      PhyNum;             /* 0x0E */
+	U8                      PrimFlags;          /* 0x0F */
+	U32                     Primitive;          /* 0x10 */
+	U8                      LookupMethod;       /* 0x14 */
+	U8                      Reserved5;          /* 0x15 */
+	U16                     SlotNumber;         /* 0x16 */
+	U64                     LookupAddress;      /* 0x18 */
+	U32                     IOCParameterValue;  /* 0x20 */
+	U32                     Reserved7;          /* 0x24 */
+	U32                     Reserved8;          /* 0x28 */
+} MPI26_IOUNIT_CONTROL_REQUEST,
+	*PTR_MPI26_IOUNIT_CONTROL_REQUEST,
+	Mpi26IoUnitControlRequest_t,
+	*pMpi26IoUnitControlRequest_t;
+
+/* values for the Operation field */
+#define MPI26_CTRL_OP_CLEAR_ALL_PERSISTENT              (0x02)
+#define MPI26_CTRL_OP_SAS_PHY_LINK_RESET                (0x06)
+#define MPI26_CTRL_OP_SAS_PHY_HARD_RESET                (0x07)
+#define MPI26_CTRL_OP_PHY_CLEAR_ERROR_LOG               (0x08)
+#define MPI26_CTRL_OP_LINK_CLEAR_ERROR_LOG              (0x09)
+#define MPI26_CTRL_OP_SAS_SEND_PRIMITIVE                (0x0A)
+#define MPI26_CTRL_OP_FORCE_FULL_DISCOVERY              (0x0B)
+#define MPI26_CTRL_OP_REMOVE_DEVICE                     (0x0D)
+#define MPI26_CTRL_OP_LOOKUP_MAPPING                    (0x0E)
+#define MPI26_CTRL_OP_SET_IOC_PARAMETER                 (0x0F)
+#define MPI26_CTRL_OP_ENABLE_FP_DEVICE                  (0x10)
+#define MPI26_CTRL_OP_DISABLE_FP_DEVICE                 (0x11)
+#define MPI26_CTRL_OP_ENABLE_FP_ALL                     (0x12)
+#define MPI26_CTRL_OP_DISABLE_FP_ALL                    (0x13)
+#define MPI26_CTRL_OP_DEV_ENABLE_NCQ                    (0x14)
+#define MPI26_CTRL_OP_DEV_DISABLE_NCQ                   (0x15)
+#define MPI26_CTRL_OP_SHUTDOWN                          (0x16)
+#define MPI26_CTRL_OP_DEV_ENABLE_PERSIST_CONNECTION     (0x17)
+#define MPI26_CTRL_OP_DEV_DISABLE_PERSIST_CONNECTION    (0x18)
+#define MPI26_CTRL_OP_DEV_CLOSE_PERSIST_CONNECTION      (0x19)
+#define MPI26_CTRL_OP_ENABLE_NVME_SGL_FORMAT            (0x1A)
+#define MPI26_CTRL_OP_DISABLE_NVME_SGL_FORMAT           (0x1B)
+#define MPI26_CTRL_OP_PRODUCT_SPECIFIC_MIN              (0x80)
+
+/* values for the PrimFlags field */
+#define MPI26_CTRL_PRIMFLAGS_SINGLE                     (0x08)
+#define MPI26_CTRL_PRIMFLAGS_TRIPLE                     (0x02)
+#define MPI26_CTRL_PRIMFLAGS_REDUNDANT                  (0x01)
+
+/* values for the LookupMethod field */
+#define MPI26_CTRL_LOOKUP_METHOD_WWID_ADDRESS           (0x01)
+#define MPI26_CTRL_LOOKUP_METHOD_ENCLOSURE_SLOT         (0x02)
+#define MPI26_CTRL_LOOKUP_METHOD_SAS_DEVICE_NAME        (0x03)
+
+
+/* IO Unit Control Reply Message */
+typedef struct _MPI26_IOUNIT_CONTROL_REPLY {
+	U8                      Operation;          /* 0x00 */
+	U8                      Reserved1;          /* 0x01 */
+	U8                      MsgLength;          /* 0x02 */
+	U8                      Function;           /* 0x03 */
+	U16                     DevHandle;          /* 0x04 */
+	U8                      IOCParameter;       /* 0x06 */
+	U8                      MsgFlags;           /* 0x07 */
+	U8                      VP_ID;              /* 0x08 */
+	U8                      VF_ID;              /* 0x09 */
+	U16                     Reserved3;          /* 0x0A */
+	U16                     Reserved4;          /* 0x0C */
+	U16                     IOCStatus;          /* 0x0E */
+	U32                     IOCLogInfo;         /* 0x10 */
+} MPI26_IOUNIT_CONTROL_REPLY,
+	*PTR_MPI26_IOUNIT_CONTROL_REPLY,
+	Mpi26IoUnitControlReply_t,
+	*pMpi26IoUnitControlReply_t;
+
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_pci.h b/drivers/scsi/mpt3sas/mpi/mpi2_pci.h
new file mode 100644
index 0000000000..bb7b79cfa5
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_pci.h
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2000-2020 Broadcom Inc. All rights reserved.
+ *
+ *
+ *          Name:  mpi2_pci.h
+ *         Title:  MPI PCIe Attached Devices structures and definitions.
+ * Creation Date:  October 9, 2012
+ *
+ * mpi2_pci.h Version:  02.00.04
+ *
+ * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
+ *       prefix are for use only on MPI v2.5 products, and must not be used
+ *       with MPI v2.0 products. Unless otherwise noted, names beginning with
+ *       MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
+ *
+ * Version History
+ * ---------------
+ *
+ * Date      Version   Description
+ * --------  --------  ------------------------------------------------------
+ * 03-16-15  02.00.00  Initial version.
+ * 02-17-16  02.00.01  Removed AHCI support.
+ *                     Removed SOP support.
+ * 07-01-16  02.00.02  Added MPI26_NVME_FLAGS_FORCE_ADMIN_ERR_RESP to
+ *                     NVME Encapsulated Request.
+ * 07-22-18  02.00.03  Updted flags field for NVME Encapsulated req
+ * 12-17-18  02.00.04  Added MPI26_PCIE_DEVINFO_SCSI
+ *			Shortten some defines to be compatible with DOS
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_PCI_H
+#define MPI2_PCI_H
+
+
+/*
+ *Values for the PCIe DeviceInfo field used in PCIe Device Status Change Event
+ *data and PCIe Configuration pages.
+ */
+#define MPI26_PCIE_DEVINFO_DIRECT_ATTACH        (0x00000010)
+
+#define MPI26_PCIE_DEVINFO_MASK_DEVICE_TYPE     (0x0000000F)
+#define MPI26_PCIE_DEVINFO_NO_DEVICE            (0x00000000)
+#define MPI26_PCIE_DEVINFO_PCI_SWITCH           (0x00000001)
+#define MPI26_PCIE_DEVINFO_NVME                 (0x00000003)
+#define MPI26_PCIE_DEVINFO_SCSI                 (0x00000004)
+
+/****************************************************************************
+*  NVMe Encapsulated message
+****************************************************************************/
+
+/*NVME Encapsulated Request Message */
+typedef struct _MPI26_NVME_ENCAPSULATED_REQUEST {
+	U16	DevHandle;                      /*0x00 */
+	U8	ChainOffset;                    /*0x02 */
+	U8	Function;                       /*0x03 */
+	U16	EncapsulatedCommandLength;      /*0x04 */
+	U8	Reserved1;                      /*0x06 */
+	U8	MsgFlags;                       /*0x07 */
+	U8	VP_ID;                          /*0x08 */
+	U8	VF_ID;                          /*0x09 */
+	U16	Reserved2;                      /*0x0A */
+	U32	Reserved3;                      /*0x0C */
+	U64	ErrorResponseBaseAddress;       /*0x10 */
+	U16	ErrorResponseAllocationLength;  /*0x18 */
+	U16	Flags;                          /*0x1A */
+	U32	DataLength;                     /*0x1C */
+	U8	NVMe_Command[4];                /*0x20 */
+
+} MPI26_NVME_ENCAPSULATED_REQUEST, *PTR_MPI26_NVME_ENCAPSULATED_REQUEST,
+	Mpi26NVMeEncapsulatedRequest_t, *pMpi26NVMeEncapsulatedRequest_t;
+
+/*defines for the Flags field */
+#define MPI26_NVME_FLAGS_FORCE_ADMIN_ERR_RESP       (0x0020)
+/*Submission Queue Type*/
+#define MPI26_NVME_FLAGS_SUBMISSIONQ_MASK           (0x0010)
+#define MPI26_NVME_FLAGS_SUBMISSIONQ_IO             (0x0000)
+#define MPI26_NVME_FLAGS_SUBMISSIONQ_ADMIN          (0x0010)
+/*Error Response Address Space */
+#define MPI26_NVME_FLAGS_ERR_RSP_ADDR_MASK          (0x000C)
+#define MPI26_NVME_FLAGS_ERR_RSP_ADDR_SYSTEM        (0x0000)
+#define MPI26_NVME_FLAGS_ERR_RSP_ADDR_IOCTL         (0x0008)
+/* Data Direction*/
+#define MPI26_NVME_FLAGS_DATADIRECTION_MASK         (0x0003)
+#define MPI26_NVME_FLAGS_NODATATRANSFER             (0x0000)
+#define MPI26_NVME_FLAGS_WRITE                      (0x0001)
+#define MPI26_NVME_FLAGS_READ                       (0x0002)
+#define MPI26_NVME_FLAGS_BIDIRECTIONAL              (0x0003)
+
+
+/*NVMe Encapuslated Reply Message */
+typedef struct _MPI26_NVME_ENCAPSULATED_ERROR_REPLY {
+	U16	DevHandle;                      /*0x00 */
+	U8	MsgLength;                      /*0x02 */
+	U8	Function;                       /*0x03 */
+	U16	EncapsulatedCommandLength;      /*0x04 */
+	U8	Reserved1;                      /*0x06 */
+	U8	MsgFlags;                       /*0x07 */
+	U8	VP_ID;                          /*0x08 */
+	U8	VF_ID;                          /*0x09 */
+	U16	Reserved2;                      /*0x0A */
+	U16	Reserved3;                      /*0x0C */
+	U16	IOCStatus;                      /*0x0E */
+	U32	IOCLogInfo;                     /*0x10 */
+	U16	ErrorResponseCount;             /*0x14 */
+	U16	Reserved4;                      /*0x16 */
+} MPI26_NVME_ENCAPSULATED_ERROR_REPLY,
+	*PTR_MPI26_NVME_ENCAPSULATED_ERROR_REPLY,
+	Mpi26NVMeEncapsulatedErrorReply_t,
+	*pMpi26NVMeEncapsulatedErrorReply_t;
+
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_raid.h b/drivers/scsi/mpt3sas/mpi/mpi2_raid.h
new file mode 100644
index 0000000000..b770eb516c
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_raid.h
@@ -0,0 +1,356 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2000-2020 Broadcom Inc. All rights reserved.
+ *
+ *
+ *          Name:  mpi2_raid.h
+ *         Title:  MPI Integrated RAID messages and structures
+ * Creation Date:  April 26, 2007
+ *
+ *   mpi2_raid.h Version:  02.00.11
+ *
+ * Version History
+ * ---------------
+ *
+ * Date      Version   Description
+ * --------  --------  ------------------------------------------------------
+ * 04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 08-31-07  02.00.01  Modifications to RAID Action request and reply,
+ *                     including the Actions and ActionData.
+ * 02-29-08  02.00.02  Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD.
+ * 05-21-08  02.00.03  Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that
+ *                     the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT
+ *                     can be sized by the build environment.
+ * 07-30-09  02.00.04  Added proper define for the Use Default Settings bit of
+ *                     VolumeCreationFlags and marked the old one as obsolete.
+ * 05-12-10  02.00.05  Added MPI2_RAID_VOL_FLAGS_OP_MDC define.
+ * 08-24-10  02.00.06  Added MPI2_RAID_ACTION_COMPATIBILITY_CHECK along with
+ *                     related structures and defines.
+ *                     Added product-specific range to RAID Action values.
+ * 11-18-11  02.00.07  Incorporating additions for MPI v2.5.
+ * 02-06-12  02.00.08  Added MPI2_RAID_ACTION_PHYSDISK_HIDDEN.
+ * 07-26-12  02.00.09  Added ElapsedSeconds field to MPI2_RAID_VOL_INDICATOR.
+ *                     Added MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID define.
+ * 04-17-13  02.00.10  Added MPI25_RAID_ACTION_ADATA_ALLOW_PI.
+ * 11-18-14  02.00.11  Updated copyright information.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_RAID_H
+#define MPI2_RAID_H
+
+/*****************************************************************************
+*
+*              Integrated RAID Messages
+*
+*****************************************************************************/
+
+/****************************************************************************
+* RAID Action messages
+****************************************************************************/
+
+/* ActionDataWord defines for use with MPI2_RAID_ACTION_CREATE_VOLUME action */
+#define MPI25_RAID_ACTION_ADATA_ALLOW_PI            (0x80000000)
+
+/*ActionDataWord defines for use with MPI2_RAID_ACTION_DELETE_VOLUME action */
+#define MPI2_RAID_ACTION_ADATA_KEEP_LBA0            (0x00000000)
+#define MPI2_RAID_ACTION_ADATA_ZERO_LBA0            (0x00000001)
+
+/*use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for
+ *MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */
+
+/*ActionDataWord defines for use with
+ *MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES action */
+#define MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD  (0x00000001)
+
+/*ActionDataWord for MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE Action */
+typedef struct _MPI2_RAID_ACTION_RATE_DATA {
+	U8 RateToChange;	/*0x00 */
+	U8 RateOrMode;		/*0x01 */
+	U16 DataScrubDuration;	/*0x02 */
+} MPI2_RAID_ACTION_RATE_DATA, *PTR_MPI2_RAID_ACTION_RATE_DATA,
+	Mpi2RaidActionRateData_t, *pMpi2RaidActionRateData_t;
+
+#define MPI2_RAID_ACTION_SET_RATE_RESYNC            (0x00)
+#define MPI2_RAID_ACTION_SET_RATE_DATA_SCRUB        (0x01)
+#define MPI2_RAID_ACTION_SET_RATE_POWERSAVE_MODE    (0x02)
+
+/*ActionDataWord for MPI2_RAID_ACTION_START_RAID_FUNCTION Action */
+typedef struct _MPI2_RAID_ACTION_START_RAID_FUNCTION {
+	U8 RAIDFunction;	/*0x00 */
+	U8 Flags;		/*0x01 */
+	U16 Reserved1;		/*0x02 */
+} MPI2_RAID_ACTION_START_RAID_FUNCTION,
+	*PTR_MPI2_RAID_ACTION_START_RAID_FUNCTION,
+	Mpi2RaidActionStartRaidFunction_t,
+	*pMpi2RaidActionStartRaidFunction_t;
+
+/*defines for the RAIDFunction field */
+#define MPI2_RAID_ACTION_START_BACKGROUND_INIT      (0x00)
+#define MPI2_RAID_ACTION_START_ONLINE_CAP_EXPANSION (0x01)
+#define MPI2_RAID_ACTION_START_CONSISTENCY_CHECK    (0x02)
+
+/*defines for the Flags field */
+#define MPI2_RAID_ACTION_START_NEW                  (0x00)
+#define MPI2_RAID_ACTION_START_RESUME               (0x01)
+
+/*ActionDataWord for MPI2_RAID_ACTION_STOP_RAID_FUNCTION Action */
+typedef struct _MPI2_RAID_ACTION_STOP_RAID_FUNCTION {
+	U8 RAIDFunction;	/*0x00 */
+	U8 Flags;		/*0x01 */
+	U16 Reserved1;		/*0x02 */
+} MPI2_RAID_ACTION_STOP_RAID_FUNCTION,
+	*PTR_MPI2_RAID_ACTION_STOP_RAID_FUNCTION,
+	Mpi2RaidActionStopRaidFunction_t,
+	*pMpi2RaidActionStopRaidFunction_t;
+
+/*defines for the RAIDFunction field */
+#define MPI2_RAID_ACTION_STOP_BACKGROUND_INIT       (0x00)
+#define MPI2_RAID_ACTION_STOP_ONLINE_CAP_EXPANSION  (0x01)
+#define MPI2_RAID_ACTION_STOP_CONSISTENCY_CHECK     (0x02)
+
+/*defines for the Flags field */
+#define MPI2_RAID_ACTION_STOP_ABORT                 (0x00)
+#define MPI2_RAID_ACTION_STOP_PAUSE                 (0x01)
+
+/*ActionDataWord for MPI2_RAID_ACTION_CREATE_HOT_SPARE Action */
+typedef struct _MPI2_RAID_ACTION_HOT_SPARE {
+	U8 HotSparePool;	/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U16 DevHandle;		/*0x02 */
+} MPI2_RAID_ACTION_HOT_SPARE, *PTR_MPI2_RAID_ACTION_HOT_SPARE,
+	Mpi2RaidActionHotSpare_t, *pMpi2RaidActionHotSpare_t;
+
+/*ActionDataWord for MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE Action */
+typedef struct _MPI2_RAID_ACTION_FW_UPDATE_MODE {
+	U8 Flags;		/*0x00 */
+	U8 DeviceFirmwareUpdateModeTimeout;	/*0x01 */
+	U16 Reserved1;		/*0x02 */
+} MPI2_RAID_ACTION_FW_UPDATE_MODE,
+	*PTR_MPI2_RAID_ACTION_FW_UPDATE_MODE,
+	Mpi2RaidActionFwUpdateMode_t,
+	*pMpi2RaidActionFwUpdateMode_t;
+
+/*ActionDataWord defines for use with
+ *MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE action */
+#define MPI2_RAID_ACTION_ADATA_DISABLE_FW_UPDATE        (0x00)
+#define MPI2_RAID_ACTION_ADATA_ENABLE_FW_UPDATE         (0x01)
+
+typedef union _MPI2_RAID_ACTION_DATA {
+	U32 Word;
+	MPI2_RAID_ACTION_RATE_DATA Rates;
+	MPI2_RAID_ACTION_START_RAID_FUNCTION StartRaidFunction;
+	MPI2_RAID_ACTION_STOP_RAID_FUNCTION StopRaidFunction;
+	MPI2_RAID_ACTION_HOT_SPARE HotSpare;
+	MPI2_RAID_ACTION_FW_UPDATE_MODE FwUpdateMode;
+} MPI2_RAID_ACTION_DATA, *PTR_MPI2_RAID_ACTION_DATA,
+	Mpi2RaidActionData_t, *pMpi2RaidActionData_t;
+
+/*RAID Action Request Message */
+typedef struct _MPI2_RAID_ACTION_REQUEST {
+	U8 Action;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 VolDevHandle;	/*0x04 */
+	U8 PhysDiskNum;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved2;		/*0x0A */
+	U32 Reserved3;		/*0x0C */
+	MPI2_RAID_ACTION_DATA ActionDataWord;	/*0x10 */
+	MPI2_SGE_SIMPLE_UNION ActionDataSGE;	/*0x14 */
+} MPI2_RAID_ACTION_REQUEST, *PTR_MPI2_RAID_ACTION_REQUEST,
+	Mpi2RaidActionRequest_t, *pMpi2RaidActionRequest_t;
+
+/*RAID Action request Action values */
+
+#define MPI2_RAID_ACTION_INDICATOR_STRUCT           (0x01)
+#define MPI2_RAID_ACTION_CREATE_VOLUME              (0x02)
+#define MPI2_RAID_ACTION_DELETE_VOLUME              (0x03)
+#define MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES        (0x04)
+#define MPI2_RAID_ACTION_ENABLE_ALL_VOLUMES         (0x05)
+#define MPI2_RAID_ACTION_PHYSDISK_OFFLINE           (0x0A)
+#define MPI2_RAID_ACTION_PHYSDISK_ONLINE            (0x0B)
+#define MPI2_RAID_ACTION_FAIL_PHYSDISK              (0x0F)
+#define MPI2_RAID_ACTION_ACTIVATE_VOLUME            (0x11)
+#define MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE      (0x15)
+#define MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE     (0x17)
+#define MPI2_RAID_ACTION_SET_VOLUME_NAME            (0x18)
+#define MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE     (0x19)
+#define MPI2_RAID_ACTION_ENABLE_FAILED_VOLUME       (0x1C)
+#define MPI2_RAID_ACTION_CREATE_HOT_SPARE           (0x1D)
+#define MPI2_RAID_ACTION_DELETE_HOT_SPARE           (0x1E)
+#define MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED  (0x20)
+#define MPI2_RAID_ACTION_START_RAID_FUNCTION        (0x21)
+#define MPI2_RAID_ACTION_STOP_RAID_FUNCTION         (0x22)
+#define MPI2_RAID_ACTION_COMPATIBILITY_CHECK        (0x23)
+#define MPI2_RAID_ACTION_PHYSDISK_HIDDEN            (0x24)
+#define MPI2_RAID_ACTION_MIN_PRODUCT_SPECIFIC       (0x80)
+#define MPI2_RAID_ACTION_MAX_PRODUCT_SPECIFIC       (0xFF)
+
+/*RAID Volume Creation Structure */
+
+/*
+ *The following define can be customized for the targeted product.
+ */
+#ifndef MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS
+#define MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS        (1)
+#endif
+
+typedef struct _MPI2_RAID_VOLUME_PHYSDISK {
+	U8 RAIDSetNum;		/*0x00 */
+	U8 PhysDiskMap;		/*0x01 */
+	U16 PhysDiskDevHandle;	/*0x02 */
+} MPI2_RAID_VOLUME_PHYSDISK, *PTR_MPI2_RAID_VOLUME_PHYSDISK,
+	Mpi2RaidVolumePhysDisk_t, *pMpi2RaidVolumePhysDisk_t;
+
+/*defines for the PhysDiskMap field */
+#define MPI2_RAIDACTION_PHYSDISK_PRIMARY            (0x01)
+#define MPI2_RAIDACTION_PHYSDISK_SECONDARY          (0x02)
+
+typedef struct _MPI2_RAID_VOLUME_CREATION_STRUCT {
+	U8 NumPhysDisks;	/*0x00 */
+	U8 VolumeType;		/*0x01 */
+	U16 Reserved1;		/*0x02 */
+	U32 VolumeCreationFlags;	/*0x04 */
+	U32 VolumeSettings;	/*0x08 */
+	U8 Reserved2;		/*0x0C */
+	U8 ResyncRate;		/*0x0D */
+	U16 DataScrubDuration;	/*0x0E */
+	U64 VolumeMaxLBA;	/*0x10 */
+	U32 StripeSize;		/*0x18 */
+	U8 Name[16];		/*0x1C */
+	MPI2_RAID_VOLUME_PHYSDISK
+		PhysDisk[MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS];	/*0x2C */
+} MPI2_RAID_VOLUME_CREATION_STRUCT,
+	*PTR_MPI2_RAID_VOLUME_CREATION_STRUCT,
+	Mpi2RaidVolumeCreationStruct_t,
+	*pMpi2RaidVolumeCreationStruct_t;
+
+/*use MPI2_RAID_VOL_TYPE_ defines from mpi2_cnfg.h for VolumeType */
+
+/*defines for the VolumeCreationFlags field */
+#define MPI2_RAID_VOL_CREATION_DEFAULT_SETTINGS     (0x80000000)
+#define MPI2_RAID_VOL_CREATION_BACKGROUND_INIT      (0x00000004)
+#define MPI2_RAID_VOL_CREATION_LOW_LEVEL_INIT       (0x00000002)
+#define MPI2_RAID_VOL_CREATION_MIGRATE_DATA         (0x00000001)
+/*The following is an obsolete define.
+ *It must be shifted left 24 bits in order to set the proper bit.
+ */
+#define MPI2_RAID_VOL_CREATION_USE_DEFAULT_SETTINGS (0x80)
+
+/*RAID Online Capacity Expansion Structure */
+
+typedef struct _MPI2_RAID_ONLINE_CAPACITY_EXPANSION {
+	U32 Flags;		/*0x00 */
+	U16 DevHandle0;		/*0x04 */
+	U16 Reserved1;		/*0x06 */
+	U16 DevHandle1;		/*0x08 */
+	U16 Reserved2;		/*0x0A */
+} MPI2_RAID_ONLINE_CAPACITY_EXPANSION,
+	*PTR_MPI2_RAID_ONLINE_CAPACITY_EXPANSION,
+	Mpi2RaidOnlineCapacityExpansion_t,
+	*pMpi2RaidOnlineCapacityExpansion_t;
+
+/*RAID Compatibility Input Structure */
+
+typedef struct _MPI2_RAID_COMPATIBILITY_INPUT_STRUCT {
+	U16 SourceDevHandle;	/*0x00 */
+	U16 CandidateDevHandle;	/*0x02 */
+	U32 Flags;		/*0x04 */
+	U32 Reserved1;		/*0x08 */
+	U32 Reserved2;		/*0x0C */
+} MPI2_RAID_COMPATIBILITY_INPUT_STRUCT,
+	*PTR_MPI2_RAID_COMPATIBILITY_INPUT_STRUCT,
+	Mpi2RaidCompatibilityInputStruct_t,
+	*pMpi2RaidCompatibilityInputStruct_t;
+
+/*defines for RAID Compatibility Structure Flags field */
+#define MPI2_RAID_COMPAT_SOURCE_IS_VOLUME_FLAG      (0x00000002)
+#define MPI2_RAID_COMPAT_REPORT_SOURCE_INFO_FLAG    (0x00000001)
+
+/*RAID Volume Indicator Structure */
+
+typedef struct _MPI2_RAID_VOL_INDICATOR {
+	U64 TotalBlocks;	/*0x00 */
+	U64 BlocksRemaining;	/*0x08 */
+	U32 Flags;		/*0x10 */
+	U32 ElapsedSeconds;	/* 0x14 */
+} MPI2_RAID_VOL_INDICATOR, *PTR_MPI2_RAID_VOL_INDICATOR,
+	Mpi2RaidVolIndicator_t, *pMpi2RaidVolIndicator_t;
+
+/*defines for RAID Volume Indicator Flags field */
+#define MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID   (0x80000000)
+#define MPI2_RAID_VOL_FLAGS_OP_MASK                 (0x0000000F)
+#define MPI2_RAID_VOL_FLAGS_OP_BACKGROUND_INIT      (0x00000000)
+#define MPI2_RAID_VOL_FLAGS_OP_ONLINE_CAP_EXPANSION (0x00000001)
+#define MPI2_RAID_VOL_FLAGS_OP_CONSISTENCY_CHECK    (0x00000002)
+#define MPI2_RAID_VOL_FLAGS_OP_RESYNC               (0x00000003)
+#define MPI2_RAID_VOL_FLAGS_OP_MDC                  (0x00000004)
+
+/*RAID Compatibility Result Structure */
+
+typedef struct _MPI2_RAID_COMPATIBILITY_RESULT_STRUCT {
+	U8 State;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U16 Reserved2;		/*0x02 */
+	U32 GenericAttributes;	/*0x04 */
+	U32 OEMSpecificAttributes;	/*0x08 */
+	U32 Reserved3;		/*0x0C */
+	U32 Reserved4;		/*0x10 */
+} MPI2_RAID_COMPATIBILITY_RESULT_STRUCT,
+	*PTR_MPI2_RAID_COMPATIBILITY_RESULT_STRUCT,
+	Mpi2RaidCompatibilityResultStruct_t,
+	*pMpi2RaidCompatibilityResultStruct_t;
+
+/*defines for RAID Compatibility Result Structure State field */
+#define MPI2_RAID_COMPAT_STATE_COMPATIBLE           (0x00)
+#define MPI2_RAID_COMPAT_STATE_NOT_COMPATIBLE       (0x01)
+
+/*defines for RAID Compatibility Result Structure GenericAttributes field */
+#define MPI2_RAID_COMPAT_GENATTRIB_4K_SECTOR            (0x00000010)
+
+#define MPI2_RAID_COMPAT_GENATTRIB_MEDIA_MASK           (0x0000000C)
+#define MPI2_RAID_COMPAT_GENATTRIB_SOLID_STATE_DRIVE    (0x00000008)
+#define MPI2_RAID_COMPAT_GENATTRIB_HARD_DISK_DRIVE      (0x00000004)
+
+#define MPI2_RAID_COMPAT_GENATTRIB_PROTOCOL_MASK        (0x00000003)
+#define MPI2_RAID_COMPAT_GENATTRIB_SAS_PROTOCOL         (0x00000002)
+#define MPI2_RAID_COMPAT_GENATTRIB_SATA_PROTOCOL        (0x00000001)
+
+/*RAID Action Reply ActionData union */
+typedef union _MPI2_RAID_ACTION_REPLY_DATA {
+	U32 Word[6];
+	MPI2_RAID_VOL_INDICATOR RaidVolumeIndicator;
+	U16 VolDevHandle;
+	U8 VolumeState;
+	U8 PhysDiskNum;
+	MPI2_RAID_COMPATIBILITY_RESULT_STRUCT RaidCompatibilityResult;
+} MPI2_RAID_ACTION_REPLY_DATA, *PTR_MPI2_RAID_ACTION_REPLY_DATA,
+	Mpi2RaidActionReplyData_t, *pMpi2RaidActionReplyData_t;
+
+/*use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for
+ *MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */
+
+/*RAID Action Reply Message */
+typedef struct _MPI2_RAID_ACTION_REPLY {
+	U8 Action;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 VolDevHandle;	/*0x04 */
+	U8 PhysDiskNum;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved2;		/*0x0A */
+	U16 Reserved3;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	MPI2_RAID_ACTION_REPLY_DATA ActionData;	/*0x14 */
+} MPI2_RAID_ACTION_REPLY, *PTR_MPI2_RAID_ACTION_REPLY,
+	Mpi2RaidActionReply_t, *pMpi2RaidActionReply_t;
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_sas.h b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h
new file mode 100644
index 0000000000..16c922a8a0
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h
@@ -0,0 +1,304 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2000-2020 Broadcom Inc. All rights reserved.
+ *
+ *
+ *          Name:  mpi2_sas.h
+ *         Title:  MPI Serial Attached SCSI structures and definitions
+ * Creation Date:  February 9, 2007
+ *
+ * mpi2_sas.h Version:  02.00.10
+ *
+ * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
+ *       prefix are for use only on MPI v2.5 products, and must not be used
+ *       with MPI v2.0 products. Unless otherwise noted, names beginning with
+ *       MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
+ *
+ * Version History
+ * ---------------
+ *
+ * Date      Version   Description
+ * --------  --------  ------------------------------------------------------
+ * 04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 06-26-07  02.00.01  Added Clear All Persistent Operation to SAS IO Unit
+ *                     Control Request.
+ * 10-02-08  02.00.02  Added Set IOC Parameter Operation to SAS IO Unit Control
+ *                     Request.
+ * 10-28-09  02.00.03  Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST
+ *                     to MPI2_SGE_IO_UNION since it supports chained SGLs.
+ * 05-12-10  02.00.04  Modified some comments.
+ * 08-11-10  02.00.05  Added NCQ operations to SAS IO Unit Control.
+ * 11-18-11  02.00.06  Incorporating additions for MPI v2.5.
+ * 07-10-12  02.00.07  Added MPI2_SATA_PT_SGE_UNION for use in the SATA
+ *                     Passthrough Request message.
+ * 08-19-13  02.00.08  Made MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL obsolete
+ *			for anything newer than MPI v2.0.
+ * 11-18-14  02.00.09  Updated copyright information.
+ * 03-16-15  02.00.10  Updated for MPI v2.6.
+ *                     Added MPI2_SATA_PT_REQ_PT_FLAGS_FPDMA.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_SAS_H
+#define MPI2_SAS_H
+
+/*
+ *Values for SASStatus.
+ */
+#define MPI2_SASSTATUS_SUCCESS                          (0x00)
+#define MPI2_SASSTATUS_UNKNOWN_ERROR                    (0x01)
+#define MPI2_SASSTATUS_INVALID_FRAME                    (0x02)
+#define MPI2_SASSTATUS_UTC_BAD_DEST                     (0x03)
+#define MPI2_SASSTATUS_UTC_BREAK_RECEIVED               (0x04)
+#define MPI2_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED   (0x05)
+#define MPI2_SASSTATUS_UTC_PORT_LAYER_REQUEST           (0x06)
+#define MPI2_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED       (0x07)
+#define MPI2_SASSTATUS_UTC_STP_RESOURCES_BUSY           (0x08)
+#define MPI2_SASSTATUS_UTC_WRONG_DESTINATION            (0x09)
+#define MPI2_SASSTATUS_SHORT_INFORMATION_UNIT           (0x0A)
+#define MPI2_SASSTATUS_LONG_INFORMATION_UNIT            (0x0B)
+#define MPI2_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA    (0x0C)
+#define MPI2_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR    (0x0D)
+#define MPI2_SASSTATUS_XFER_RDY_NOT_EXPECTED            (0x0E)
+#define MPI2_SASSTATUS_DATA_INCORRECT_DATA_LENGTH       (0x0F)
+#define MPI2_SASSTATUS_DATA_TOO_MUCH_READ_DATA          (0x10)
+#define MPI2_SASSTATUS_DATA_OFFSET_ERROR                (0x11)
+#define MPI2_SASSTATUS_SDSF_NAK_RECEIVED                (0x12)
+#define MPI2_SASSTATUS_SDSF_CONNECTION_FAILED           (0x13)
+#define MPI2_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT       (0x14)
+
+/*
+ *Values for the SAS DeviceInfo field used in SAS Device Status Change Event
+ *data and SAS Configuration pages.
+ */
+#define MPI2_SAS_DEVICE_INFO_SEP                (0x00004000)
+#define MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE       (0x00002000)
+#define MPI2_SAS_DEVICE_INFO_LSI_DEVICE         (0x00001000)
+#define MPI2_SAS_DEVICE_INFO_DIRECT_ATTACH      (0x00000800)
+#define MPI2_SAS_DEVICE_INFO_SSP_TARGET         (0x00000400)
+#define MPI2_SAS_DEVICE_INFO_STP_TARGET         (0x00000200)
+#define MPI2_SAS_DEVICE_INFO_SMP_TARGET         (0x00000100)
+#define MPI2_SAS_DEVICE_INFO_SATA_DEVICE        (0x00000080)
+#define MPI2_SAS_DEVICE_INFO_SSP_INITIATOR      (0x00000040)
+#define MPI2_SAS_DEVICE_INFO_STP_INITIATOR      (0x00000020)
+#define MPI2_SAS_DEVICE_INFO_SMP_INITIATOR      (0x00000010)
+#define MPI2_SAS_DEVICE_INFO_SATA_HOST          (0x00000008)
+
+#define MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE   (0x00000007)
+#define MPI2_SAS_DEVICE_INFO_NO_DEVICE          (0x00000000)
+#define MPI2_SAS_DEVICE_INFO_END_DEVICE         (0x00000001)
+#define MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER      (0x00000002)
+#define MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER    (0x00000003)
+
+/*****************************************************************************
+*
+*       SAS Messages
+*
+*****************************************************************************/
+
+/****************************************************************************
+* SMP Passthrough messages
+****************************************************************************/
+
+/*SMP Passthrough Request Message */
+typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST {
+	U8 PassthroughFlags;	/*0x00 */
+	U8 PhysicalPort;	/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 RequestDataLength;	/*0x04 */
+	U8 SGLFlags;		/*0x06*//*MPI v2.0 only. Reserved on MPI v2.5*/
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved1;		/*0x0A */
+	U32 Reserved2;		/*0x0C */
+	U64 SASAddress;		/*0x10 */
+	U32 Reserved3;		/*0x18 */
+	U32 Reserved4;		/*0x1C */
+	MPI2_SIMPLE_SGE_UNION SGL;/*0x20 */
+} MPI2_SMP_PASSTHROUGH_REQUEST, *PTR_MPI2_SMP_PASSTHROUGH_REQUEST,
+	Mpi2SmpPassthroughRequest_t, *pMpi2SmpPassthroughRequest_t;
+
+/*values for PassthroughFlags field */
+#define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE      (0x80)
+
+/*MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
+
+/*SMP Passthrough Reply Message */
+typedef struct _MPI2_SMP_PASSTHROUGH_REPLY {
+	U8 PassthroughFlags;	/*0x00 */
+	U8 PhysicalPort;	/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 ResponseDataLength;	/*0x04 */
+	U8 SGLFlags;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved1;		/*0x0A */
+	U8 Reserved2;		/*0x0C */
+	U8 SASStatus;		/*0x0D */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U32 Reserved3;		/*0x14 */
+	U8 ResponseData[4];	/*0x18 */
+} MPI2_SMP_PASSTHROUGH_REPLY, *PTR_MPI2_SMP_PASSTHROUGH_REPLY,
+	Mpi2SmpPassthroughReply_t, *pMpi2SmpPassthroughReply_t;
+
+/*values for PassthroughFlags field */
+#define MPI2_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE    (0x80)
+
+/*values for SASStatus field are at the top of this file */
+
+/****************************************************************************
+* SATA Passthrough messages
+****************************************************************************/
+
+typedef union _MPI2_SATA_PT_SGE_UNION {
+	MPI2_SGE_SIMPLE_UNION MpiSimple;	/*MPI v2.0 only */
+	MPI2_SGE_CHAIN_UNION MpiChain;	/*MPI v2.0 only */
+	MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
+	MPI2_IEEE_SGE_CHAIN_UNION IeeeChain;	/*MPI v2.0 only */
+	MPI25_IEEE_SGE_CHAIN64 IeeeChain64;	/*MPI v2.5 only */
+} MPI2_SATA_PT_SGE_UNION, *PTR_MPI2_SATA_PT_SGE_UNION,
+	Mpi2SataPTSGEUnion_t, *pMpi2SataPTSGEUnion_t;
+
+/*SATA Passthrough Request Message */
+typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST {
+	U16 DevHandle;		/*0x00 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 PassthroughFlags;	/*0x04 */
+	U8 SGLFlags;		/*0x06*//*MPI v2.0 only. Reserved on MPI v2.5*/
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved1;		/*0x0A */
+	U32 Reserved2;		/*0x0C */
+	U32 Reserved3;		/*0x10 */
+	U32 Reserved4;		/*0x14 */
+	U32 DataLength;		/*0x18 */
+	U8 CommandFIS[20];	/*0x1C */
+	MPI2_SATA_PT_SGE_UNION SGL;/*0x30*//*MPI v2.5: IEEE 64 elements only*/
+} MPI2_SATA_PASSTHROUGH_REQUEST, *PTR_MPI2_SATA_PASSTHROUGH_REQUEST,
+	Mpi2SataPassthroughRequest_t,
+	*pMpi2SataPassthroughRequest_t;
+
+/*values for PassthroughFlags field */
+#define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG      (0x0100)
+#define MPI2_SATA_PT_REQ_PT_FLAGS_FPDMA             (0x0040)
+#define MPI2_SATA_PT_REQ_PT_FLAGS_DMA               (0x0020)
+#define MPI2_SATA_PT_REQ_PT_FLAGS_PIO               (0x0010)
+#define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU    (0x0004)
+#define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE             (0x0002)
+#define MPI2_SATA_PT_REQ_PT_FLAGS_READ              (0x0001)
+
+/*MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
+
+/*SATA Passthrough Reply Message */
+typedef struct _MPI2_SATA_PASSTHROUGH_REPLY {
+	U16 DevHandle;		/*0x00 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 PassthroughFlags;	/*0x04 */
+	U8 SGLFlags;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved1;		/*0x0A */
+	U8 Reserved2;		/*0x0C */
+	U8 SASStatus;		/*0x0D */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U8 StatusFIS[20];	/*0x14 */
+	U32 StatusControlRegisters;	/*0x28 */
+	U32 TransferCount;	/*0x2C */
+} MPI2_SATA_PASSTHROUGH_REPLY, *PTR_MPI2_SATA_PASSTHROUGH_REPLY,
+	Mpi2SataPassthroughReply_t, *pMpi2SataPassthroughReply_t;
+
+/*values for SASStatus field are at the top of this file */
+
+/****************************************************************************
+* SAS IO Unit Control messages
+* (MPI v2.5 and earlier only.
+* Replaced by IO Unit Control messages in MPI v2.6 and later.)
+****************************************************************************/
+
+/*SAS IO Unit Control Request Message */
+typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST {
+	U8 Operation;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 DevHandle;		/*0x04 */
+	U8 IOCParameter;	/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved3;		/*0x0A */
+	U16 Reserved4;		/*0x0C */
+	U8 PhyNum;		/*0x0E */
+	U8 PrimFlags;		/*0x0F */
+	U32 Primitive;		/*0x10 */
+	U8 LookupMethod;	/*0x14 */
+	U8 Reserved5;		/*0x15 */
+	U16 SlotNumber;		/*0x16 */
+	U64 LookupAddress;	/*0x18 */
+	U32 IOCParameterValue;	/*0x20 */
+	U32 Reserved7;		/*0x24 */
+	U32 Reserved8;		/*0x28 */
+} MPI2_SAS_IOUNIT_CONTROL_REQUEST,
+	*PTR_MPI2_SAS_IOUNIT_CONTROL_REQUEST,
+	Mpi2SasIoUnitControlRequest_t,
+	*pMpi2SasIoUnitControlRequest_t;
+
+/*values for the Operation field */
+#define MPI2_SAS_OP_CLEAR_ALL_PERSISTENT        (0x02)
+#define MPI2_SAS_OP_PHY_LINK_RESET              (0x06)
+#define MPI2_SAS_OP_PHY_HARD_RESET              (0x07)
+#define MPI2_SAS_OP_PHY_CLEAR_ERROR_LOG         (0x08)
+#define MPI2_SAS_OP_SEND_PRIMITIVE              (0x0A)
+#define MPI2_SAS_OP_FORCE_FULL_DISCOVERY        (0x0B)
+#define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C) /* MPI v2.0 only */
+#define MPI2_SAS_OP_REMOVE_DEVICE               (0x0D)
+#define MPI2_SAS_OP_LOOKUP_MAPPING              (0x0E)
+#define MPI2_SAS_OP_SET_IOC_PARAMETER           (0x0F)
+#define MPI25_SAS_OP_ENABLE_FP_DEVICE           (0x10)
+#define MPI25_SAS_OP_DISABLE_FP_DEVICE          (0x11)
+#define MPI25_SAS_OP_ENABLE_FP_ALL              (0x12)
+#define MPI25_SAS_OP_DISABLE_FP_ALL             (0x13)
+#define MPI2_SAS_OP_DEV_ENABLE_NCQ              (0x14)
+#define MPI2_SAS_OP_DEV_DISABLE_NCQ             (0x15)
+#define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN        (0x80)
+
+/*values for the PrimFlags field */
+#define MPI2_SAS_PRIMFLAGS_SINGLE               (0x08)
+#define MPI2_SAS_PRIMFLAGS_TRIPLE               (0x02)
+#define MPI2_SAS_PRIMFLAGS_REDUNDANT            (0x01)
+
+/*values for the LookupMethod field */
+#define MPI2_SAS_LOOKUP_METHOD_SAS_ADDRESS          (0x01)
+#define MPI2_SAS_LOOKUP_METHOD_SAS_ENCLOSURE_SLOT   (0x02)
+#define MPI2_SAS_LOOKUP_METHOD_SAS_DEVICE_NAME      (0x03)
+
+/*SAS IO Unit Control Reply Message */
+typedef struct _MPI2_SAS_IOUNIT_CONTROL_REPLY {
+	U8 Operation;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 DevHandle;		/*0x04 */
+	U8 IOCParameter;	/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved3;		/*0x0A */
+	U16 Reserved4;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+} MPI2_SAS_IOUNIT_CONTROL_REPLY,
+	*PTR_MPI2_SAS_IOUNIT_CONTROL_REPLY,
+	Mpi2SasIoUnitControlReply_t, *pMpi2SasIoUnitControlReply_t;
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
new file mode 100644
index 0000000000..17ef7f63b9
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h
@@ -0,0 +1,565 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2000-2020 Broadcom Inc. All rights reserved.
+ *
+ *
+ *          Name:  mpi2_tool.h
+ *         Title:  MPI diagnostic tool structures and definitions
+ * Creation Date:  March 26, 2007
+ *
+ *   mpi2_tool.h Version:  02.00.16
+ *
+ * Version History
+ * ---------------
+ *
+ * Date      Version   Description
+ * --------  --------  ------------------------------------------------------
+ * 04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 12-18-07  02.00.01  Added Diagnostic Buffer Post and Diagnostic Release
+ *                     structures and defines.
+ * 02-29-08  02.00.02  Modified various names to make them 32-character unique.
+ * 05-06-09  02.00.03  Added ISTWI Read Write Tool and Diagnostic CLI Tool.
+ * 07-30-09  02.00.04  Added ExtendedType field to DiagnosticBufferPost request
+ *                     and reply messages.
+ *                     Added MPI2_DIAG_BUF_TYPE_EXTENDED.
+ *                     Incremented MPI2_DIAG_BUF_TYPE_COUNT.
+ * 05-12-10  02.00.05  Added Diagnostic Data Upload tool.
+ * 08-11-10  02.00.06  Added defines that were missing for Diagnostic Buffer
+ *                     Post Request.
+ * 05-25-11  02.00.07  Added Flags field and related defines to
+ *                     MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST.
+ * 11-18-11  02.00.08  Incorporating additions for MPI v2.5.
+ * 07-10-12  02.00.09  Add MPI v2.5 Toolbox Diagnostic CLI Tool Request
+ *                     message.
+ * 07-26-12  02.00.10  Modified MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST so that
+ *                     it uses MPI Chain SGE as well as MPI Simple SGE.
+ * 08-19-13  02.00.11  Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info.
+ * 01-08-14  02.00.12  Added MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC.
+ * 11-18-14  02.00.13  Updated copyright information.
+ * 08-25-16  02.00.14  Added new values for the Flags field of Toolbox Clean
+ *                     Tool Request Message.
+ * 07-22-18  02.00.15  Added defines for new TOOLBOX_PCIE_LANE_MARGINING tool.
+ *                     Added option for DeviceInfo field in ISTWI tool.
+ * 12-17-18  02.00.16  Shorten some defines to be compatible with DOS.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_TOOL_H
+#define MPI2_TOOL_H
+
+/*****************************************************************************
+*
+*              Toolbox Messages
+*
+*****************************************************************************/
+
+/*defines for the Tools */
+#define MPI2_TOOLBOX_CLEAN_TOOL                     (0x00)
+#define MPI2_TOOLBOX_MEMORY_MOVE_TOOL               (0x01)
+#define MPI2_TOOLBOX_DIAG_DATA_UPLOAD_TOOL          (0x02)
+#define MPI2_TOOLBOX_ISTWI_READ_WRITE_TOOL          (0x03)
+#define MPI2_TOOLBOX_BEACON_TOOL                    (0x05)
+#define MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL            (0x06)
+#define MPI2_TOOLBOX_TEXT_DISPLAY_TOOL              (0x07)
+#define MPI26_TOOLBOX_BACKEND_PCIE_LANE_MARGIN      (0x08)
+
+/****************************************************************************
+* Toolbox reply
+****************************************************************************/
+
+typedef struct _MPI2_TOOLBOX_REPLY {
+	U8 Tool;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Reserved5;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+} MPI2_TOOLBOX_REPLY, *PTR_MPI2_TOOLBOX_REPLY,
+	Mpi2ToolboxReply_t, *pMpi2ToolboxReply_t;
+
+/****************************************************************************
+* Toolbox Clean Tool request
+****************************************************************************/
+
+typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST {
+	U8 Tool;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U32 Flags;		/*0x0C */
+} MPI2_TOOLBOX_CLEAN_REQUEST, *PTR_MPI2_TOOLBOX_CLEAN_REQUEST,
+	Mpi2ToolboxCleanRequest_t, *pMpi2ToolboxCleanRequest_t;
+
+/*values for the Flags field */
+#define MPI2_TOOLBOX_CLEAN_BOOT_SERVICES            (0x80000000)
+#define MPI2_TOOLBOX_CLEAN_PERSIST_MANUFACT_PAGES   (0x40000000)
+#define MPI2_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES      (0x20000000)
+#define MPI2_TOOLBOX_CLEAN_FW_CURRENT               (0x10000000)
+#define MPI2_TOOLBOX_CLEAN_FW_BACKUP                (0x08000000)
+#define MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC   (0x04000000)
+#define MPI2_TOOLBOX_CLEAN_MEGARAID                 (0x02000000)
+#define MPI2_TOOLBOX_CLEAN_INITIALIZATION           (0x01000000)
+#define MPI2_TOOLBOX_CLEAN_SBR                      (0x00800000)
+#define MPI2_TOOLBOX_CLEAN_SBR_BACKUP               (0x00400000)
+#define MPI2_TOOLBOX_CLEAN_HIIM                     (0x00200000)
+#define MPI2_TOOLBOX_CLEAN_HIIA                     (0x00100000)
+#define MPI2_TOOLBOX_CLEAN_CTLR                     (0x00080000)
+#define MPI2_TOOLBOX_CLEAN_IMR_FIRMWARE             (0x00040000)
+#define MPI2_TOOLBOX_CLEAN_MR_NVDATA                (0x00020000)
+#define MPI2_TOOLBOX_CLEAN_RESERVED_5_16            (0x0001FFE0)
+#define MPI2_TOOLBOX_CLEAN_ALL_BUT_MPB              (0x00000010)
+#define MPI2_TOOLBOX_CLEAN_ENTIRE_FLASH             (0x00000008)
+#define MPI2_TOOLBOX_CLEAN_FLASH                    (0x00000004)
+#define MPI2_TOOLBOX_CLEAN_SEEPROM                  (0x00000002)
+#define MPI2_TOOLBOX_CLEAN_NVSRAM                   (0x00000001)
+
+/****************************************************************************
+* Toolbox Memory Move request
+****************************************************************************/
+
+typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST {
+	U8 Tool;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	MPI2_SGE_SIMPLE_UNION SGL;	/*0x0C */
+} MPI2_TOOLBOX_MEM_MOVE_REQUEST, *PTR_MPI2_TOOLBOX_MEM_MOVE_REQUEST,
+	Mpi2ToolboxMemMoveRequest_t, *pMpi2ToolboxMemMoveRequest_t;
+
+/****************************************************************************
+* Toolbox Diagnostic Data Upload request
+****************************************************************************/
+
+typedef struct _MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST {
+	U8 Tool;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U8 SGLFlags;		/*0x0C */
+	U8 Reserved5;		/*0x0D */
+	U16 Reserved6;		/*0x0E */
+	U32 Flags;		/*0x10 */
+	U32 DataLength;		/*0x14 */
+	MPI2_SGE_SIMPLE_UNION SGL;	/*0x18 */
+} MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST,
+	*PTR_MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST,
+	Mpi2ToolboxDiagDataUploadRequest_t,
+	*pMpi2ToolboxDiagDataUploadRequest_t;
+
+/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
+
+typedef struct _MPI2_DIAG_DATA_UPLOAD_HEADER {
+	U32 DiagDataLength;	/*00h */
+	U8 FormatCode;		/*04h */
+	U8 Reserved1;		/*05h */
+	U16 Reserved2;		/*06h */
+} MPI2_DIAG_DATA_UPLOAD_HEADER, *PTR_MPI2_DIAG_DATA_UPLOAD_HEADER,
+	Mpi2DiagDataUploadHeader_t, *pMpi2DiagDataUploadHeader_t;
+
+/****************************************************************************
+* Toolbox ISTWI Read Write Tool
+****************************************************************************/
+
+/*Toolbox ISTWI Read Write Tool request message */
+typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST {
+	U8 Tool;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U32 Reserved5;		/*0x0C */
+	U32 Reserved6;		/*0x10 */
+	U8 DevIndex;		/*0x14 */
+	U8 Action;		/*0x15 */
+	U8 SGLFlags;		/*0x16 */
+	U8 Flags;		/*0x17 */
+	U16 TxDataLength;	/*0x18 */
+	U16 RxDataLength;	/*0x1A */
+	U32 Reserved8;		/*0x1C */
+	U32 Reserved9;		/*0x20 */
+	U32 Reserved10;		/*0x24 */
+	U32 Reserved11;		/*0x28 */
+	U32 Reserved12;		/*0x2C */
+	MPI2_SGE_SIMPLE_UNION SGL;	/*0x30 */
+} MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
+	*PTR_MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
+	Mpi2ToolboxIstwiReadWriteRequest_t,
+	*pMpi2ToolboxIstwiReadWriteRequest_t;
+
+/*values for the Action field */
+#define MPI2_TOOL_ISTWI_ACTION_READ_DATA            (0x01)
+#define MPI2_TOOL_ISTWI_ACTION_WRITE_DATA           (0x02)
+#define MPI2_TOOL_ISTWI_ACTION_SEQUENCE             (0x03)
+#define MPI2_TOOL_ISTWI_ACTION_RESERVE_BUS          (0x10)
+#define MPI2_TOOL_ISTWI_ACTION_RELEASE_BUS          (0x11)
+#define MPI2_TOOL_ISTWI_ACTION_RESET                (0x12)
+
+/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
+
+/*values for the Flags field */
+#define MPI2_TOOL_ISTWI_FLAG_AUTO_RESERVE_RELEASE   (0x80)
+#define MPI2_TOOL_ISTWI_FLAG_PAGE_ADDR_MASK         (0x07)
+
+/*MPI26 TOOLBOX Request MsgFlags defines */
+#define MPI26_TOOL_ISTWI_MSGFLG_ADDR_MASK           (0x01)
+/*Request uses Man Page 43 device index addressing */
+#define MPI26_TOOL_ISTWI_MSGFLG_ADDR_INDEX          (0x00)
+/*Request uses Man Page 43 device info struct addressing */
+#define MPI26_TOOL_ISTWI_MSGFLG_ADDR_INFO           (0x01)
+
+/*Toolbox ISTWI Read Write Tool reply message */
+typedef struct _MPI2_TOOLBOX_ISTWI_REPLY {
+	U8 Tool;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Reserved5;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U8 DevIndex;		/*0x14 */
+	U8 Action;		/*0x15 */
+	U8 IstwiStatus;		/*0x16 */
+	U8 Reserved6;		/*0x17 */
+	U16 TxDataCount;	/*0x18 */
+	U16 RxDataCount;	/*0x1A */
+} MPI2_TOOLBOX_ISTWI_REPLY, *PTR_MPI2_TOOLBOX_ISTWI_REPLY,
+	Mpi2ToolboxIstwiReply_t, *pMpi2ToolboxIstwiReply_t;
+
+/****************************************************************************
+* Toolbox Beacon Tool request
+****************************************************************************/
+
+typedef struct _MPI2_TOOLBOX_BEACON_REQUEST {
+	U8 Tool;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U8 Reserved5;		/*0x0C */
+	U8 PhysicalPort;	/*0x0D */
+	U8 Reserved6;		/*0x0E */
+	U8 Flags;		/*0x0F */
+} MPI2_TOOLBOX_BEACON_REQUEST, *PTR_MPI2_TOOLBOX_BEACON_REQUEST,
+	Mpi2ToolboxBeaconRequest_t, *pMpi2ToolboxBeaconRequest_t;
+
+/*values for the Flags field */
+#define MPI2_TOOLBOX_FLAGS_BEACONMODE_OFF       (0x00)
+#define MPI2_TOOLBOX_FLAGS_BEACONMODE_ON        (0x01)
+
+/****************************************************************************
+* Toolbox Diagnostic CLI Tool
+****************************************************************************/
+
+#define MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH    (0x5C)
+
+/*MPI v2.0 Toolbox Diagnostic CLI Tool request message */
+typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST {
+	U8 Tool;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U8 SGLFlags;		/*0x0C */
+	U8 Reserved5;		/*0x0D */
+	U16 Reserved6;		/*0x0E */
+	U32 DataLength;		/*0x10 */
+	U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH];/*0x14 */
+	MPI2_MPI_SGE_IO_UNION SGL;	/*0x70 */
+} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
+	*PTR_MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
+	Mpi2ToolboxDiagnosticCliRequest_t,
+	*pMpi2ToolboxDiagnosticCliRequest_t;
+
+/*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
+
+/*MPI v2.5 Toolbox Diagnostic CLI Tool request message */
+typedef struct _MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST {
+	U8 Tool;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U32 Reserved5;		/*0x0C */
+	U32 DataLength;		/*0x10 */
+	U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH];/*0x14 */
+	MPI25_SGE_IO_UNION      SGL;                        /* 0x70 */
+} MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
+	*PTR_MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
+	Mpi25ToolboxDiagnosticCliRequest_t,
+	*pMpi25ToolboxDiagnosticCliRequest_t;
+
+/*Toolbox Diagnostic CLI Tool reply message */
+typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY {
+	U8 Tool;		/*0x00 */
+	U8 Reserved1;		/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Reserved5;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U32 ReturnedDataLength;	/*0x14 */
+} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY,
+	*PTR_MPI2_TOOLBOX_DIAG_CLI_REPLY,
+	Mpi2ToolboxDiagnosticCliReply_t,
+	*pMpi2ToolboxDiagnosticCliReply_t;
+
+
+/****************************************************************************
+*  Toolbox Console Text Display Tool
+****************************************************************************/
+
+/* Toolbox Console Text Display Tool request message */
+typedef struct _MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST {
+	U8			Tool;			/* 0x00 */
+	U8			Reserved1;		/* 0x01 */
+	U8			ChainOffset;		/* 0x02 */
+	U8			Function;		/* 0x03 */
+	U16			Reserved2;		/* 0x04 */
+	U8			Reserved3;		/* 0x06 */
+	U8			MsgFlags;		/* 0x07 */
+	U8			VP_ID;			/* 0x08 */
+	U8			VF_ID;			/* 0x09 */
+	U16			Reserved4;		/* 0x0A */
+	U8			Console;		/* 0x0C */
+	U8			Flags;			/* 0x0D */
+	U16			Reserved6;		/* 0x0E */
+	U8			TextToDisplay[4];	/* 0x10 */
+} MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST,
+*PTR_MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST,
+Mpi2ToolboxTextDisplayRequest_t,
+*pMpi2ToolboxTextDisplayRequest_t;
+
+/* defines for the Console field */
+#define MPI2_TOOLBOX_CONSOLE_TYPE_MASK          (0xF0)
+#define MPI2_TOOLBOX_CONSOLE_TYPE_DEFAULT       (0x00)
+#define MPI2_TOOLBOX_CONSOLE_TYPE_UART          (0x10)
+#define MPI2_TOOLBOX_CONSOLE_TYPE_ETHERNET      (0x20)
+
+#define MPI2_TOOLBOX_CONSOLE_NUMBER_MASK        (0x0F)
+
+/* defines for the Flags field */
+#define MPI2_TOOLBOX_CONSOLE_FLAG_TIMESTAMP     (0x01)
+
+
+/***************************************************************************
+ *  Toolbox Backend Lane Margining Tool
+ ***************************************************************************
+ */
+
+/*Toolbox Backend Lane Margining Tool request message */
+typedef struct _MPI26_TOOLBOX_LANE_MARGIN_REQUEST {
+	U8 Tool;			/*0x00 */
+	U8 Reserved1;			/*0x01 */
+	U8 ChainOffset;			/*0x02 */
+	U8 Function;			/*0x03 */
+	U16 Reserved2;			/*0x04 */
+	U8 Reserved3;			/*0x06 */
+	U8 MsgFlags;			/*0x07 */
+	U8 VP_ID;			/*0x08 */
+	U8 VF_ID;			/*0x09 */
+	U16 Reserved4;			/*0x0A */
+	U8 Command;			/*0x0C */
+	U8 SwitchPort;			/*0x0D */
+	U16 DevHandle;			/*0x0E */
+	U8 RegisterOffset;		/*0x10 */
+	U8 Reserved5;			/*0x11 */
+	U16 DataLength;			/*0x12 */
+	MPI25_SGE_IO_UNION SGL;		/*0x14 */
+} MPI26_TOOLBOX_LANE_MARGINING_REQUEST,
+	*PTR_MPI2_TOOLBOX_LANE_MARGINING_REQUEST,
+	Mpi26ToolboxLaneMarginingRequest_t,
+	*pMpi2ToolboxLaneMarginingRequest_t;
+
+/* defines for the Command field */
+#define MPI26_TOOL_MARGIN_COMMAND_ENTER_MARGIN_MODE        (0x01)
+#define MPI26_TOOL_MARGIN_COMMAND_READ_REGISTER_DATA       (0x02)
+#define MPI26_TOOL_MARGIN_COMMAND_WRITE_REGISTER_DATA      (0x03)
+#define MPI26_TOOL_MARGIN_COMMAND_EXIT_MARGIN_MODE         (0x04)
+
+
+/*Toolbox Backend Lane Margining Tool reply message */
+typedef struct _MPI26_TOOLBOX_LANE_MARGIN_REPLY {
+	U8 Tool;			/*0x00 */
+	U8 Reserved1;			/*0x01 */
+	U8 MsgLength;			/*0x02 */
+	U8 Function;			/*0x03 */
+	U16 Reserved2;			/*0x04 */
+	U8 Reserved3;			/*0x06 */
+	U8 MsgFlags;			/*0x07 */
+	U8 VP_ID;			/*0x08 */
+	U8 VF_ID;			/*0x09 */
+	U16 Reserved4;			/*0x0A */
+	U16 Reserved5;			/*0x0C */
+	U16 IOCStatus;			/*0x0E */
+	U32 IOCLogInfo;			/*0x10 */
+	U16 ReturnedDataLength;		/*0x14 */
+	U16 Reserved6;			/*0x16 */
+} MPI26_TOOLBOX_LANE_MARGINING_REPLY,
+	*PTR_MPI26_TOOLBOX_LANE_MARGINING_REPLY,
+	Mpi26ToolboxLaneMarginingReply_t,
+	*pMpi26ToolboxLaneMarginingReply_t;
+
+
+/*****************************************************************************
+*
+*      Diagnostic Buffer Messages
+*
+*****************************************************************************/
+
+/****************************************************************************
+* Diagnostic Buffer Post request
+****************************************************************************/
+
+typedef struct _MPI2_DIAG_BUFFER_POST_REQUEST {
+	U8 ExtendedType;	/*0x00 */
+	U8 BufferType;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U64 BufferAddress;	/*0x0C */
+	U32 BufferLength;	/*0x14 */
+	U32 Reserved5;		/*0x18 */
+	U32 Reserved6;		/*0x1C */
+	U32 Flags;		/*0x20 */
+	U32 ProductSpecific[23];	/*0x24 */
+} MPI2_DIAG_BUFFER_POST_REQUEST, *PTR_MPI2_DIAG_BUFFER_POST_REQUEST,
+	Mpi2DiagBufferPostRequest_t, *pMpi2DiagBufferPostRequest_t;
+
+/*values for the ExtendedType field */
+#define MPI2_DIAG_EXTENDED_TYPE_UTILIZATION         (0x02)
+
+/*values for the BufferType field */
+#define MPI2_DIAG_BUF_TYPE_TRACE                    (0x00)
+#define MPI2_DIAG_BUF_TYPE_SNAPSHOT                 (0x01)
+#define MPI2_DIAG_BUF_TYPE_EXTENDED                 (0x02)
+/*count of the number of buffer types */
+#define MPI2_DIAG_BUF_TYPE_COUNT                    (0x03)
+
+/*values for the Flags field */
+#define MPI2_DIAG_BUF_FLAG_RELEASE_ON_FULL          (0x00000002)
+#define MPI2_DIAG_BUF_FLAG_IMMEDIATE_RELEASE        (0x00000001)
+
+/****************************************************************************
+* Diagnostic Buffer Post reply
+****************************************************************************/
+
+typedef struct _MPI2_DIAG_BUFFER_POST_REPLY {
+	U8 ExtendedType;	/*0x00 */
+	U8 BufferType;		/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Reserved5;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+	U32 TransferLength;	/*0x14 */
+} MPI2_DIAG_BUFFER_POST_REPLY, *PTR_MPI2_DIAG_BUFFER_POST_REPLY,
+	Mpi2DiagBufferPostReply_t, *pMpi2DiagBufferPostReply_t;
+
+/****************************************************************************
+* Diagnostic Release request
+****************************************************************************/
+
+typedef struct _MPI2_DIAG_RELEASE_REQUEST {
+	U8 Reserved1;		/*0x00 */
+	U8 BufferType;		/*0x01 */
+	U8 ChainOffset;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+} MPI2_DIAG_RELEASE_REQUEST, *PTR_MPI2_DIAG_RELEASE_REQUEST,
+	Mpi2DiagReleaseRequest_t, *pMpi2DiagReleaseRequest_t;
+
+/****************************************************************************
+* Diagnostic Buffer Post reply
+****************************************************************************/
+
+typedef struct _MPI2_DIAG_RELEASE_REPLY {
+	U8 Reserved1;		/*0x00 */
+	U8 BufferType;		/*0x01 */
+	U8 MsgLength;		/*0x02 */
+	U8 Function;		/*0x03 */
+	U16 Reserved2;		/*0x04 */
+	U8 Reserved3;		/*0x06 */
+	U8 MsgFlags;		/*0x07 */
+	U8 VP_ID;		/*0x08 */
+	U8 VF_ID;		/*0x09 */
+	U16 Reserved4;		/*0x0A */
+	U16 Reserved5;		/*0x0C */
+	U16 IOCStatus;		/*0x0E */
+	U32 IOCLogInfo;		/*0x10 */
+} MPI2_DIAG_RELEASE_REPLY, *PTR_MPI2_DIAG_RELEASE_REPLY,
+	Mpi2DiagReleaseReply_t, *pMpi2DiagReleaseReply_t;
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_type.h b/drivers/scsi/mpt3sas/mpi/mpi2_type.h
new file mode 100644
index 0000000000..36494439a4
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_type.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright 2000-2014 Avago Technologies.  All rights reserved.
+ *
+ *
+ *           Name:  mpi2_type.h
+ *          Title:  MPI basic type definitions
+ *  Creation Date:  August 16, 2006
+ *
+ *    mpi2_type.h Version:  02.00.01
+ *
+ *  Version History
+ *  ---------------
+ *
+ *  Date      Version   Description
+ *  --------  --------  ------------------------------------------------------
+ *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
+ *  11-18-14  02.00.01  Updated copyright information.
+ *  --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_TYPE_H
+#define MPI2_TYPE_H
+
+/*******************************************************************************
+ * Define * if it hasn't already been defined. By default
+ * * is defined to be a near pointer. MPI2_POINTER can be defined as
+ * a far pointer by defining * as "far *" before this header file is
+ * included.
+ */
+
+/* the basic types may have already been included by mpi_type.h */
+#ifndef MPI_TYPE_H
+/*****************************************************************************
+*
+*               Basic Types
+*
+*****************************************************************************/
+
+typedef u8 U8;
+typedef __le16 U16;
+typedef __le32 U32;
+typedef __le64 U64 __attribute__ ((aligned(4)));
+
+/*****************************************************************************
+*
+*               Pointer Types
+*
+*****************************************************************************/
+
+typedef U8 *PU8;
+typedef U16 *PU16;
+typedef U32 *PU32;
+typedef U64 *PU64;
+
+#endif
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
new file mode 100644
index 0000000000..a75f670bf5
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -0,0 +1,8959 @@
+/*
+ * This is the Fusion MPT base driver providing common API layer interface
+ * for access to MPT (Message Passing Technology) firmware.
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c
+ * Copyright (C) 2012-2014  LSI Corporation
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/time.h>
+#include <linux/ktime.h>
+#include <linux/kthread.h>
+#include <asm/page.h>        /* To get host page size per arch */
+
+
+#include "mpt3sas_base.h"
+
+static MPT_CALLBACK	mpt_callbacks[MPT_MAX_CALLBACKS];
+
+
+#define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */
+
+ /* maximum controller queue depth */
+#define MAX_HBA_QUEUE_DEPTH	30000
+#define MAX_CHAIN_DEPTH		100000
+static int max_queue_depth = -1;
+module_param(max_queue_depth, int, 0444);
+MODULE_PARM_DESC(max_queue_depth, " max controller queue depth ");
+
+static int max_sgl_entries = -1;
+module_param(max_sgl_entries, int, 0444);
+MODULE_PARM_DESC(max_sgl_entries, " max sg entries ");
+
+static int msix_disable = -1;
+module_param(msix_disable, int, 0444);
+MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)");
+
+static int smp_affinity_enable = 1;
+module_param(smp_affinity_enable, int, 0444);
+MODULE_PARM_DESC(smp_affinity_enable, "SMP affinity feature enable/disable Default: enable(1)");
+
+static int max_msix_vectors = -1;
+module_param(max_msix_vectors, int, 0444);
+MODULE_PARM_DESC(max_msix_vectors,
+	" max msix vectors");
+
+static int irqpoll_weight = -1;
+module_param(irqpoll_weight, int, 0444);
+MODULE_PARM_DESC(irqpoll_weight,
+	"irq poll weight (default= one fourth of HBA queue depth)");
+
+static int mpt3sas_fwfault_debug;
+MODULE_PARM_DESC(mpt3sas_fwfault_debug,
+	" enable detection of firmware fault and halt firmware - (default=0)");
+
+static int perf_mode = -1;
+module_param(perf_mode, int, 0444);
+MODULE_PARM_DESC(perf_mode,
+	"Performance mode (only for Aero/Sea Generation), options:\n\t\t"
+	"0 - balanced: high iops mode is enabled &\n\t\t"
+	"interrupt coalescing is enabled only on high iops queues,\n\t\t"
+	"1 - iops: high iops mode is disabled &\n\t\t"
+	"interrupt coalescing is enabled on all queues,\n\t\t"
+	"2 - latency: high iops mode is disabled &\n\t\t"
+	"interrupt coalescing is enabled on all queues with timeout value 0xA,\n"
+	"\t\tdefault - default perf_mode is 'balanced'"
+	);
+
+static int poll_queues;
+module_param(poll_queues, int, 0444);
+MODULE_PARM_DESC(poll_queues, "Number of queues to be use for io_uring poll mode.\n\t\t"
+	"This parameter is effective only if host_tagset_enable=1. &\n\t\t"
+	"when poll_queues are enabled then &\n\t\t"
+	"perf_mode is set to latency mode. &\n\t\t"
+	);
+
+enum mpt3sas_perf_mode {
+	MPT_PERF_MODE_DEFAULT	= -1,
+	MPT_PERF_MODE_BALANCED	= 0,
+	MPT_PERF_MODE_IOPS	= 1,
+	MPT_PERF_MODE_LATENCY	= 2,
+};
+
+static int
+_base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc,
+		u32 ioc_state, int timeout);
+static int
+_base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc);
+static void
+_base_clear_outstanding_commands(struct MPT3SAS_ADAPTER *ioc);
+
+static u32
+_base_readl_ext_retry(const void __iomem *addr);
+
+/**
+ * mpt3sas_base_check_cmd_timeout - Function
+ *		to check timeout and command termination due
+ *		to Host reset.
+ *
+ * @ioc:	per adapter object.
+ * @status:	Status of issued command.
+ * @mpi_request:mf request pointer.
+ * @sz:		size of buffer.
+ *
+ * Return: 1/0 Reset to be done or Not
+ */
+u8
+mpt3sas_base_check_cmd_timeout(struct MPT3SAS_ADAPTER *ioc,
+		u8 status, void *mpi_request, int sz)
+{
+	u8 issue_reset = 0;
+
+	if (!(status & MPT3_CMD_RESET))
+		issue_reset = 1;
+
+	ioc_err(ioc, "Command %s\n",
+		issue_reset == 0 ? "terminated due to Host Reset" : "Timeout");
+	_debug_dump_mf(mpi_request, sz);
+
+	return issue_reset;
+}
+
+/**
+ * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
+ * @val: ?
+ * @kp: ?
+ *
+ * Return: ?
+ */
+static int
+_scsih_set_fwfault_debug(const char *val, const struct kernel_param *kp)
+{
+	int ret = param_set_int(val, kp);
+	struct MPT3SAS_ADAPTER *ioc;
+
+	if (ret)
+		return ret;
+
+	/* global ioc spinlock to protect controller list on list operations */
+	pr_info("setting fwfault_debug(%d)\n", mpt3sas_fwfault_debug);
+	spin_lock(&gioc_lock);
+	list_for_each_entry(ioc, &mpt3sas_ioc_list, list)
+		ioc->fwfault_debug = mpt3sas_fwfault_debug;
+	spin_unlock(&gioc_lock);
+	return 0;
+}
+module_param_call(mpt3sas_fwfault_debug, _scsih_set_fwfault_debug,
+	param_get_int, &mpt3sas_fwfault_debug, 0644);
+
+/**
+ * _base_readl_aero - retry readl for max three times.
+ * @addr: MPT Fusion system interface register address
+ *
+ * Retry the readl() for max three times if it gets zero value
+ * while reading the system interface register.
+ */
+static inline u32
+_base_readl_aero(const void __iomem *addr)
+{
+	u32 i = 0, ret_val;
+
+	do {
+		ret_val = readl(addr);
+		i++;
+	} while (ret_val == 0 && i < 3);
+
+	return ret_val;
+}
+
+static u32
+_base_readl_ext_retry(const void __iomem *addr)
+{
+	u32 i, ret_val;
+
+	for (i = 0 ; i < 30 ; i++) {
+		ret_val = readl(addr);
+		if (ret_val != 0)
+			break;
+	}
+
+	return ret_val;
+}
+
+static inline u32
+_base_readl(const void __iomem *addr)
+{
+	return readl(addr);
+}
+
+/**
+ * _base_clone_reply_to_sys_mem - copies reply to reply free iomem
+ *				  in BAR0 space.
+ *
+ * @ioc: per adapter object
+ * @reply: reply message frame(lower 32bit addr)
+ * @index: System request message index.
+ */
+static void
+_base_clone_reply_to_sys_mem(struct MPT3SAS_ADAPTER *ioc, u32 reply,
+		u32 index)
+{
+	/*
+	 * 256 is offset within sys register.
+	 * 256 offset MPI frame starts. Max MPI frame supported is 32.
+	 * 32 * 128 = 4K. From here, Clone of reply free for mcpu starts
+	 */
+	u16 cmd_credit = ioc->facts.RequestCredit + 1;
+	void __iomem *reply_free_iomem = (void __iomem *)ioc->chip +
+			MPI_FRAME_START_OFFSET +
+			(cmd_credit * ioc->request_sz) + (index * sizeof(u32));
+
+	writel(reply, reply_free_iomem);
+}
+
+/**
+ * _base_clone_mpi_to_sys_mem - Writes/copies MPI frames
+ *				to system/BAR0 region.
+ *
+ * @dst_iomem: Pointer to the destination location in BAR0 space.
+ * @src: Pointer to the Source data.
+ * @size: Size of data to be copied.
+ */
+static void
+_base_clone_mpi_to_sys_mem(void *dst_iomem, void *src, u32 size)
+{
+	int i;
+	u32 *src_virt_mem = (u32 *)src;
+
+	for (i = 0; i < size/4; i++)
+		writel((u32)src_virt_mem[i],
+				(void __iomem *)dst_iomem + (i * 4));
+}
+
+/**
+ * _base_clone_to_sys_mem - Writes/copies data to system/BAR0 region
+ *
+ * @dst_iomem: Pointer to the destination location in BAR0 space.
+ * @src: Pointer to the Source data.
+ * @size: Size of data to be copied.
+ */
+static void
+_base_clone_to_sys_mem(void __iomem *dst_iomem, void *src, u32 size)
+{
+	int i;
+	u32 *src_virt_mem = (u32 *)(src);
+
+	for (i = 0; i < size/4; i++)
+		writel((u32)src_virt_mem[i],
+			(void __iomem *)dst_iomem + (i * 4));
+}
+
+/**
+ * _base_get_chain - Calculates and Returns virtual chain address
+ *			 for the provided smid in BAR0 space.
+ *
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @sge_chain_count: Scatter gather chain count.
+ *
+ * Return: the chain address.
+ */
+static inline void __iomem*
+_base_get_chain(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+		u8 sge_chain_count)
+{
+	void __iomem *base_chain, *chain_virt;
+	u16 cmd_credit = ioc->facts.RequestCredit + 1;
+
+	base_chain  = (void __iomem *)ioc->chip + MPI_FRAME_START_OFFSET +
+		(cmd_credit * ioc->request_sz) +
+		REPLY_FREE_POOL_SIZE;
+	chain_virt = base_chain + (smid * ioc->facts.MaxChainDepth *
+			ioc->request_sz) + (sge_chain_count * ioc->request_sz);
+	return chain_virt;
+}
+
+/**
+ * _base_get_chain_phys - Calculates and Returns physical address
+ *			in BAR0 for scatter gather chains, for
+ *			the provided smid.
+ *
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @sge_chain_count: Scatter gather chain count.
+ *
+ * Return: Physical chain address.
+ */
+static inline phys_addr_t
+_base_get_chain_phys(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+		u8 sge_chain_count)
+{
+	phys_addr_t base_chain_phys, chain_phys;
+	u16 cmd_credit = ioc->facts.RequestCredit + 1;
+
+	base_chain_phys  = ioc->chip_phys + MPI_FRAME_START_OFFSET +
+		(cmd_credit * ioc->request_sz) +
+		REPLY_FREE_POOL_SIZE;
+	chain_phys = base_chain_phys + (smid * ioc->facts.MaxChainDepth *
+			ioc->request_sz) + (sge_chain_count * ioc->request_sz);
+	return chain_phys;
+}
+
+/**
+ * _base_get_buffer_bar0 - Calculates and Returns BAR0 mapped Host
+ *			buffer address for the provided smid.
+ *			(Each smid can have 64K starts from 17024)
+ *
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return: Pointer to buffer location in BAR0.
+ */
+
+static void __iomem *
+_base_get_buffer_bar0(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	u16 cmd_credit = ioc->facts.RequestCredit + 1;
+	// Added extra 1 to reach end of chain.
+	void __iomem *chain_end = _base_get_chain(ioc,
+			cmd_credit + 1,
+			ioc->facts.MaxChainDepth);
+	return chain_end + (smid * 64 * 1024);
+}
+
+/**
+ * _base_get_buffer_phys_bar0 - Calculates and Returns BAR0 mapped
+ *		Host buffer Physical address for the provided smid.
+ *		(Each smid can have 64K starts from 17024)
+ *
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return: Pointer to buffer location in BAR0.
+ */
+static phys_addr_t
+_base_get_buffer_phys_bar0(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	u16 cmd_credit = ioc->facts.RequestCredit + 1;
+	phys_addr_t chain_end_phys = _base_get_chain_phys(ioc,
+			cmd_credit + 1,
+			ioc->facts.MaxChainDepth);
+	return chain_end_phys + (smid * 64 * 1024);
+}
+
+/**
+ * _base_get_chain_buffer_dma_to_chain_buffer - Iterates chain
+ *			lookup list and Provides chain_buffer
+ *			address for the matching dma address.
+ *			(Each smid can have 64K starts from 17024)
+ *
+ * @ioc: per adapter object
+ * @chain_buffer_dma: Chain buffer dma address.
+ *
+ * Return: Pointer to chain buffer. Or Null on Failure.
+ */
+static void *
+_base_get_chain_buffer_dma_to_chain_buffer(struct MPT3SAS_ADAPTER *ioc,
+		dma_addr_t chain_buffer_dma)
+{
+	u16 index, j;
+	struct chain_tracker *ct;
+
+	for (index = 0; index < ioc->scsiio_depth; index++) {
+		for (j = 0; j < ioc->chains_needed_per_io; j++) {
+			ct = &ioc->chain_lookup[index].chains_per_smid[j];
+			if (ct && ct->chain_buffer_dma == chain_buffer_dma)
+				return ct->chain_buffer;
+		}
+	}
+	ioc_info(ioc, "Provided chain_buffer_dma address is not in the lookup list\n");
+	return NULL;
+}
+
+/**
+ * _clone_sg_entries -	MPI EP's scsiio and config requests
+ *			are handled here. Base function for
+ *			double buffering, before submitting
+ *			the requests.
+ *
+ * @ioc: per adapter object.
+ * @mpi_request: mf request pointer.
+ * @smid: system request message index.
+ */
+static void _clone_sg_entries(struct MPT3SAS_ADAPTER *ioc,
+		void *mpi_request, u16 smid)
+{
+	Mpi2SGESimple32_t *sgel, *sgel_next;
+	u32  sgl_flags, sge_chain_count = 0;
+	bool is_write = false;
+	u16 i = 0;
+	void __iomem *buffer_iomem;
+	phys_addr_t buffer_iomem_phys;
+	void __iomem *buff_ptr;
+	phys_addr_t buff_ptr_phys;
+	void __iomem *dst_chain_addr[MCPU_MAX_CHAINS_PER_IO];
+	void *src_chain_addr[MCPU_MAX_CHAINS_PER_IO];
+	phys_addr_t dst_addr_phys;
+	MPI2RequestHeader_t *request_hdr;
+	struct scsi_cmnd *scmd;
+	struct scatterlist *sg_scmd = NULL;
+	int is_scsiio_req = 0;
+
+	request_hdr = (MPI2RequestHeader_t *) mpi_request;
+
+	if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST) {
+		Mpi25SCSIIORequest_t *scsiio_request =
+			(Mpi25SCSIIORequest_t *)mpi_request;
+		sgel = (Mpi2SGESimple32_t *) &scsiio_request->SGL;
+		is_scsiio_req = 1;
+	} else if (request_hdr->Function == MPI2_FUNCTION_CONFIG) {
+		Mpi2ConfigRequest_t  *config_req =
+			(Mpi2ConfigRequest_t *)mpi_request;
+		sgel = (Mpi2SGESimple32_t *) &config_req->PageBufferSGE;
+	} else
+		return;
+
+	/* From smid we can get scsi_cmd, once we have sg_scmd,
+	 * we just need to get sg_virt and sg_next to get virtual
+	 * address associated with sgel->Address.
+	 */
+
+	if (is_scsiio_req) {
+		/* Get scsi_cmd using smid */
+		scmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid);
+		if (scmd == NULL) {
+			ioc_err(ioc, "scmd is NULL\n");
+			return;
+		}
+
+		/* Get sg_scmd from scmd provided */
+		sg_scmd = scsi_sglist(scmd);
+	}
+
+	/*
+	 * 0 - 255	System register
+	 * 256 - 4352	MPI Frame. (This is based on maxCredit 32)
+	 * 4352 - 4864	Reply_free pool (512 byte is reserved
+	 *		considering maxCredit 32. Reply need extra
+	 *		room, for mCPU case kept four times of
+	 *		maxCredit).
+	 * 4864 - 17152	SGE chain element. (32cmd * 3 chain of
+	 *		128 byte size = 12288)
+	 * 17152 - x	Host buffer mapped with smid.
+	 *		(Each smid can have 64K Max IO.)
+	 * BAR0+Last 1K MSIX Addr and Data
+	 * Total size in use 2113664 bytes of 4MB BAR0
+	 */
+
+	buffer_iomem = _base_get_buffer_bar0(ioc, smid);
+	buffer_iomem_phys = _base_get_buffer_phys_bar0(ioc, smid);
+
+	buff_ptr = buffer_iomem;
+	buff_ptr_phys = buffer_iomem_phys;
+	WARN_ON(buff_ptr_phys > U32_MAX);
+
+	if (le32_to_cpu(sgel->FlagsLength) &
+			(MPI2_SGE_FLAGS_HOST_TO_IOC << MPI2_SGE_FLAGS_SHIFT))
+		is_write = true;
+
+	for (i = 0; i < MPT_MIN_PHYS_SEGMENTS + ioc->facts.MaxChainDepth; i++) {
+
+		sgl_flags =
+		    (le32_to_cpu(sgel->FlagsLength) >> MPI2_SGE_FLAGS_SHIFT);
+
+		switch (sgl_flags & MPI2_SGE_FLAGS_ELEMENT_MASK) {
+		case MPI2_SGE_FLAGS_CHAIN_ELEMENT:
+			/*
+			 * Helper function which on passing
+			 * chain_buffer_dma returns chain_buffer. Get
+			 * the virtual address for sgel->Address
+			 */
+			sgel_next =
+				_base_get_chain_buffer_dma_to_chain_buffer(ioc,
+						le32_to_cpu(sgel->Address));
+			if (sgel_next == NULL)
+				return;
+			/*
+			 * This is coping 128 byte chain
+			 * frame (not a host buffer)
+			 */
+			dst_chain_addr[sge_chain_count] =
+				_base_get_chain(ioc,
+					smid, sge_chain_count);
+			src_chain_addr[sge_chain_count] =
+						(void *) sgel_next;
+			dst_addr_phys = _base_get_chain_phys(ioc,
+						smid, sge_chain_count);
+			WARN_ON(dst_addr_phys > U32_MAX);
+			sgel->Address =
+				cpu_to_le32(lower_32_bits(dst_addr_phys));
+			sgel = sgel_next;
+			sge_chain_count++;
+			break;
+		case MPI2_SGE_FLAGS_SIMPLE_ELEMENT:
+			if (is_write) {
+				if (is_scsiio_req) {
+					_base_clone_to_sys_mem(buff_ptr,
+					    sg_virt(sg_scmd),
+					    (le32_to_cpu(sgel->FlagsLength) &
+					    0x00ffffff));
+					/*
+					 * FIXME: this relies on a a zero
+					 * PCI mem_offset.
+					 */
+					sgel->Address =
+					    cpu_to_le32((u32)buff_ptr_phys);
+				} else {
+					_base_clone_to_sys_mem(buff_ptr,
+					    ioc->config_vaddr,
+					    (le32_to_cpu(sgel->FlagsLength) &
+					    0x00ffffff));
+					sgel->Address =
+					    cpu_to_le32((u32)buff_ptr_phys);
+				}
+			}
+			buff_ptr += (le32_to_cpu(sgel->FlagsLength) &
+			    0x00ffffff);
+			buff_ptr_phys += (le32_to_cpu(sgel->FlagsLength) &
+			    0x00ffffff);
+			if ((le32_to_cpu(sgel->FlagsLength) &
+			    (MPI2_SGE_FLAGS_END_OF_BUFFER
+					<< MPI2_SGE_FLAGS_SHIFT)))
+				goto eob_clone_chain;
+			else {
+				/*
+				 * Every single element in MPT will have
+				 * associated sg_next. Better to sanity that
+				 * sg_next is not NULL, but it will be a bug
+				 * if it is null.
+				 */
+				if (is_scsiio_req) {
+					sg_scmd = sg_next(sg_scmd);
+					if (sg_scmd)
+						sgel++;
+					else
+						goto eob_clone_chain;
+				}
+			}
+			break;
+		}
+	}
+
+eob_clone_chain:
+	for (i = 0; i < sge_chain_count; i++) {
+		if (is_scsiio_req)
+			_base_clone_to_sys_mem(dst_chain_addr[i],
+				src_chain_addr[i], ioc->request_sz);
+	}
+}
+
+/**
+ *  mpt3sas_remove_dead_ioc_func - kthread context to remove dead ioc
+ * @arg: input argument, used to derive ioc
+ *
+ * Return:
+ * 0 if controller is removed from pci subsystem.
+ * -1 for other case.
+ */
+static int mpt3sas_remove_dead_ioc_func(void *arg)
+{
+	struct MPT3SAS_ADAPTER *ioc = (struct MPT3SAS_ADAPTER *)arg;
+	struct pci_dev *pdev;
+
+	if (!ioc)
+		return -1;
+
+	pdev = ioc->pdev;
+	if (!pdev)
+		return -1;
+	pci_stop_and_remove_bus_device_locked(pdev);
+	return 0;
+}
+
+/**
+ * _base_sync_drv_fw_timestamp - Sync Drive-Fw TimeStamp.
+ * @ioc: Per Adapter Object
+ *
+ * Return: nothing.
+ */
+static void _base_sync_drv_fw_timestamp(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi26IoUnitControlRequest_t *mpi_request;
+	Mpi26IoUnitControlReply_t *mpi_reply;
+	u16 smid;
+	ktime_t current_time;
+	u64 TimeStamp = 0;
+	u8 issue_reset = 0;
+
+	mutex_lock(&ioc->scsih_cmds.mutex);
+	if (ioc->scsih_cmds.status != MPT3_CMD_NOT_USED) {
+		ioc_err(ioc, "scsih_cmd in use %s\n", __func__);
+		goto out;
+	}
+	ioc->scsih_cmds.status = MPT3_CMD_PENDING;
+	smid = mpt3sas_base_get_smid(ioc, ioc->scsih_cb_idx);
+	if (!smid) {
+		ioc_err(ioc, "Failed obtaining a smid %s\n", __func__);
+		ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+		goto out;
+	}
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->scsih_cmds.smid = smid;
+	memset(mpi_request, 0, sizeof(Mpi26IoUnitControlRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_IO_UNIT_CONTROL;
+	mpi_request->Operation = MPI26_CTRL_OP_SET_IOC_PARAMETER;
+	mpi_request->IOCParameter = MPI26_SET_IOC_PARAMETER_SYNC_TIMESTAMP;
+	current_time = ktime_get_real();
+	TimeStamp = ktime_to_ms(current_time);
+	mpi_request->Reserved7 = cpu_to_le32(TimeStamp >> 32);
+	mpi_request->IOCParameterValue = cpu_to_le32(TimeStamp & 0xFFFFFFFF);
+	init_completion(&ioc->scsih_cmds.done);
+	ioc->put_smid_default(ioc, smid);
+	dinitprintk(ioc, ioc_info(ioc,
+	    "Io Unit Control Sync TimeStamp (sending), @time %lld ms\n",
+	    TimeStamp));
+	wait_for_completion_timeout(&ioc->scsih_cmds.done,
+		MPT3SAS_TIMESYNC_TIMEOUT_SECONDS*HZ);
+	if (!(ioc->scsih_cmds.status & MPT3_CMD_COMPLETE)) {
+		mpt3sas_check_cmd_timeout(ioc,
+		    ioc->scsih_cmds.status, mpi_request,
+		    sizeof(Mpi2SasIoUnitControlRequest_t)/4, issue_reset);
+		goto issue_host_reset;
+	}
+	if (ioc->scsih_cmds.status & MPT3_CMD_REPLY_VALID) {
+		mpi_reply = ioc->scsih_cmds.reply;
+		dinitprintk(ioc, ioc_info(ioc,
+		    "Io Unit Control sync timestamp (complete): ioc_status(0x%04x), loginfo(0x%08x)\n",
+		    le16_to_cpu(mpi_reply->IOCStatus),
+		    le32_to_cpu(mpi_reply->IOCLogInfo)));
+	}
+issue_host_reset:
+	if (issue_reset)
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+	ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+out:
+	mutex_unlock(&ioc->scsih_cmds.mutex);
+}
+
+/**
+ * _base_fault_reset_work - workq handling ioc fault conditions
+ * @work: input argument, used to derive ioc
+ *
+ * Context: sleep.
+ */
+static void
+_base_fault_reset_work(struct work_struct *work)
+{
+	struct MPT3SAS_ADAPTER *ioc =
+	    container_of(work, struct MPT3SAS_ADAPTER, fault_reset_work.work);
+	unsigned long	 flags;
+	u32 doorbell;
+	int rc;
+	struct task_struct *p;
+
+
+	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+	if ((ioc->shost_recovery && (ioc->ioc_coredump_loop == 0)) ||
+			ioc->pci_error_recovery)
+		goto rearm_timer;
+	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+
+	doorbell = mpt3sas_base_get_iocstate(ioc, 0);
+	if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_MASK) {
+		ioc_err(ioc, "SAS host is non-operational !!!!\n");
+
+		/* It may be possible that EEH recovery can resolve some of
+		 * pci bus failure issues rather removing the dead ioc function
+		 * by considering controller is in a non-operational state. So
+		 * here priority is given to the EEH recovery. If it doesn't
+		 * not resolve this issue, mpt3sas driver will consider this
+		 * controller to non-operational state and remove the dead ioc
+		 * function.
+		 */
+		if (ioc->non_operational_loop++ < 5) {
+			spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock,
+							 flags);
+			goto rearm_timer;
+		}
+
+		/*
+		 * Call _scsih_flush_pending_cmds callback so that we flush all
+		 * pending commands back to OS. This call is required to avoid
+		 * deadlock at block layer. Dead IOC will fail to do diag reset,
+		 * and this call is safe since dead ioc will never return any
+		 * command back from HW.
+		 */
+		mpt3sas_base_pause_mq_polling(ioc);
+		ioc->schedule_dead_ioc_flush_running_cmds(ioc);
+		/*
+		 * Set remove_host flag early since kernel thread will
+		 * take some time to execute.
+		 */
+		ioc->remove_host = 1;
+		/*Remove the Dead Host */
+		p = kthread_run(mpt3sas_remove_dead_ioc_func, ioc,
+		    "%s_dead_ioc_%d", ioc->driver_name, ioc->id);
+		if (IS_ERR(p))
+			ioc_err(ioc, "%s: Running mpt3sas_dead_ioc thread failed !!!!\n",
+				__func__);
+		else
+			ioc_err(ioc, "%s: Running mpt3sas_dead_ioc thread success !!!!\n",
+				__func__);
+		return; /* don't rearm timer */
+	}
+
+	if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_COREDUMP) {
+		u8 timeout = (ioc->manu_pg11.CoreDumpTOSec) ?
+		    ioc->manu_pg11.CoreDumpTOSec :
+		    MPT3SAS_DEFAULT_COREDUMP_TIMEOUT_SECONDS;
+
+		timeout /= (FAULT_POLLING_INTERVAL/1000);
+
+		if (ioc->ioc_coredump_loop == 0) {
+			mpt3sas_print_coredump_info(ioc,
+			    doorbell & MPI2_DOORBELL_DATA_MASK);
+			/* do not accept any IOs and disable the interrupts */
+			spin_lock_irqsave(
+			    &ioc->ioc_reset_in_progress_lock, flags);
+			ioc->shost_recovery = 1;
+			spin_unlock_irqrestore(
+			    &ioc->ioc_reset_in_progress_lock, flags);
+			mpt3sas_base_mask_interrupts(ioc);
+			mpt3sas_base_pause_mq_polling(ioc);
+			_base_clear_outstanding_commands(ioc);
+		}
+
+		ioc_info(ioc, "%s: CoreDump loop %d.",
+		    __func__, ioc->ioc_coredump_loop);
+
+		/* Wait until CoreDump completes or times out */
+		if (ioc->ioc_coredump_loop++ < timeout) {
+			spin_lock_irqsave(
+			    &ioc->ioc_reset_in_progress_lock, flags);
+			goto rearm_timer;
+		}
+	}
+
+	if (ioc->ioc_coredump_loop) {
+		if ((doorbell & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_COREDUMP)
+			ioc_err(ioc, "%s: CoreDump completed. LoopCount: %d",
+			    __func__, ioc->ioc_coredump_loop);
+		else
+			ioc_err(ioc, "%s: CoreDump Timed out. LoopCount: %d",
+			    __func__, ioc->ioc_coredump_loop);
+		ioc->ioc_coredump_loop = MPT3SAS_COREDUMP_LOOP_DONE;
+	}
+	ioc->non_operational_loop = 0;
+	if ((doorbell & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) {
+		rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+		ioc_warn(ioc, "%s: hard reset: %s\n",
+			 __func__, rc == 0 ? "success" : "failed");
+		doorbell = mpt3sas_base_get_iocstate(ioc, 0);
+		if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
+			mpt3sas_print_fault_code(ioc, doorbell &
+			    MPI2_DOORBELL_DATA_MASK);
+		} else if ((doorbell & MPI2_IOC_STATE_MASK) ==
+		    MPI2_IOC_STATE_COREDUMP)
+			mpt3sas_print_coredump_info(ioc, doorbell &
+			    MPI2_DOORBELL_DATA_MASK);
+		if (rc && (doorbell & MPI2_IOC_STATE_MASK) !=
+		    MPI2_IOC_STATE_OPERATIONAL)
+			return; /* don't rearm timer */
+	}
+	ioc->ioc_coredump_loop = 0;
+	if (ioc->time_sync_interval &&
+	    ++ioc->timestamp_update_count >= ioc->time_sync_interval) {
+		ioc->timestamp_update_count = 0;
+		_base_sync_drv_fw_timestamp(ioc);
+	}
+	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ rearm_timer:
+	if (ioc->fault_reset_work_q)
+		queue_delayed_work(ioc->fault_reset_work_q,
+		    &ioc->fault_reset_work,
+		    msecs_to_jiffies(FAULT_POLLING_INTERVAL));
+	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+}
+
+/**
+ * mpt3sas_base_start_watchdog - start the fault_reset_work_q
+ * @ioc: per adapter object
+ *
+ * Context: sleep.
+ */
+void
+mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc)
+{
+	unsigned long	 flags;
+
+	if (ioc->fault_reset_work_q)
+		return;
+
+	ioc->timestamp_update_count = 0;
+	/* initialize fault polling */
+
+	INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
+	snprintf(ioc->fault_reset_work_q_name,
+	    sizeof(ioc->fault_reset_work_q_name), "poll_%s%d_status",
+	    ioc->driver_name, ioc->id);
+	ioc->fault_reset_work_q =
+		create_singlethread_workqueue(ioc->fault_reset_work_q_name);
+	if (!ioc->fault_reset_work_q) {
+		ioc_err(ioc, "%s: failed (line=%d)\n", __func__, __LINE__);
+		return;
+	}
+	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+	if (ioc->fault_reset_work_q)
+		queue_delayed_work(ioc->fault_reset_work_q,
+		    &ioc->fault_reset_work,
+		    msecs_to_jiffies(FAULT_POLLING_INTERVAL));
+	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+}
+
+/**
+ * mpt3sas_base_stop_watchdog - stop the fault_reset_work_q
+ * @ioc: per adapter object
+ *
+ * Context: sleep.
+ */
+void
+mpt3sas_base_stop_watchdog(struct MPT3SAS_ADAPTER *ioc)
+{
+	unsigned long flags;
+	struct workqueue_struct *wq;
+
+	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+	wq = ioc->fault_reset_work_q;
+	ioc->fault_reset_work_q = NULL;
+	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+	if (wq) {
+		if (!cancel_delayed_work_sync(&ioc->fault_reset_work))
+			flush_workqueue(wq);
+		destroy_workqueue(wq);
+	}
+}
+
+/**
+ * mpt3sas_base_fault_info - verbose translation of firmware FAULT code
+ * @ioc: per adapter object
+ * @fault_code: fault code
+ */
+void
+mpt3sas_base_fault_info(struct MPT3SAS_ADAPTER *ioc, u16 fault_code)
+{
+	ioc_err(ioc, "fault_state(0x%04x)!\n", fault_code);
+}
+
+/**
+ * mpt3sas_base_coredump_info - verbose translation of firmware CoreDump state
+ * @ioc: per adapter object
+ * @fault_code: fault code
+ *
+ * Return: nothing.
+ */
+void
+mpt3sas_base_coredump_info(struct MPT3SAS_ADAPTER *ioc, u16 fault_code)
+{
+	ioc_err(ioc, "coredump_state(0x%04x)!\n", fault_code);
+}
+
+/**
+ * mpt3sas_base_wait_for_coredump_completion - Wait until coredump
+ * completes or times out
+ * @ioc: per adapter object
+ * @caller: caller function name
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_wait_for_coredump_completion(struct MPT3SAS_ADAPTER *ioc,
+		const char *caller)
+{
+	u8 timeout = (ioc->manu_pg11.CoreDumpTOSec) ?
+			ioc->manu_pg11.CoreDumpTOSec :
+			MPT3SAS_DEFAULT_COREDUMP_TIMEOUT_SECONDS;
+
+	int ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_FAULT,
+					timeout);
+
+	if (ioc_state)
+		ioc_err(ioc,
+		    "%s: CoreDump timed out. (ioc_state=0x%x)\n",
+		    caller, ioc_state);
+	else
+		ioc_info(ioc,
+		    "%s: CoreDump completed. (ioc_state=0x%x)\n",
+		    caller, ioc_state);
+
+	return ioc_state;
+}
+
+/**
+ * mpt3sas_halt_firmware - halt's mpt controller firmware
+ * @ioc: per adapter object
+ *
+ * For debugging timeout related issues.  Writing 0xCOFFEE00
+ * to the doorbell register will halt controller firmware. With
+ * the purpose to stop both driver and firmware, the enduser can
+ * obtain a ring buffer from controller UART.
+ */
+void
+mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc)
+{
+	u32 doorbell;
+
+	if (!ioc->fwfault_debug)
+		return;
+
+	dump_stack();
+
+	doorbell = ioc->base_readl_ext_retry(&ioc->chip->Doorbell);
+	if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
+		mpt3sas_print_fault_code(ioc, doorbell &
+		    MPI2_DOORBELL_DATA_MASK);
+	} else if ((doorbell & MPI2_IOC_STATE_MASK) ==
+	    MPI2_IOC_STATE_COREDUMP) {
+		mpt3sas_print_coredump_info(ioc, doorbell &
+		    MPI2_DOORBELL_DATA_MASK);
+	} else {
+		writel(0xC0FFEE00, &ioc->chip->Doorbell);
+		ioc_err(ioc, "Firmware is halted due to command timeout\n");
+	}
+
+	if (ioc->fwfault_debug == 2)
+		for (;;)
+			;
+	else
+		panic("panic in %s\n", __func__);
+}
+
+/**
+ * _base_sas_ioc_info - verbose translation of the ioc status
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @request_hdr: request mf
+ */
+static void
+_base_sas_ioc_info(struct MPT3SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply,
+	MPI2RequestHeader_t *request_hdr)
+{
+	u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	char *desc = NULL;
+	u16 frame_sz;
+	char *func_str = NULL;
+
+	/* SCSI_IO, RAID_PASS are handled from _scsih_scsi_ioc_info */
+	if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
+	    request_hdr->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
+	    request_hdr->Function == MPI2_FUNCTION_EVENT_NOTIFICATION)
+		return;
+
+	if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+		return;
+	/*
+	 * Older Firmware version doesn't support driver trigger pages.
+	 * So, skip displaying 'config invalid type' type
+	 * of error message.
+	 */
+	if (request_hdr->Function == MPI2_FUNCTION_CONFIG) {
+		Mpi2ConfigRequest_t *rqst = (Mpi2ConfigRequest_t *)request_hdr;
+
+		if ((rqst->ExtPageType ==
+		    MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER) &&
+		    !(ioc->logging_level & MPT_DEBUG_CONFIG)) {
+			return;
+		}
+	}
+
+	switch (ioc_status) {
+
+/****************************************************************************
+*  Common IOCStatus values for all replies
+****************************************************************************/
+
+	case MPI2_IOCSTATUS_INVALID_FUNCTION:
+		desc = "invalid function";
+		break;
+	case MPI2_IOCSTATUS_BUSY:
+		desc = "busy";
+		break;
+	case MPI2_IOCSTATUS_INVALID_SGL:
+		desc = "invalid sgl";
+		break;
+	case MPI2_IOCSTATUS_INTERNAL_ERROR:
+		desc = "internal error";
+		break;
+	case MPI2_IOCSTATUS_INVALID_VPID:
+		desc = "invalid vpid";
+		break;
+	case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES:
+		desc = "insufficient resources";
+		break;
+	case MPI2_IOCSTATUS_INSUFFICIENT_POWER:
+		desc = "insufficient power";
+		break;
+	case MPI2_IOCSTATUS_INVALID_FIELD:
+		desc = "invalid field";
+		break;
+	case MPI2_IOCSTATUS_INVALID_STATE:
+		desc = "invalid state";
+		break;
+	case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED:
+		desc = "op state not supported";
+		break;
+
+/****************************************************************************
+*  Config IOCStatus values
+****************************************************************************/
+
+	case MPI2_IOCSTATUS_CONFIG_INVALID_ACTION:
+		desc = "config invalid action";
+		break;
+	case MPI2_IOCSTATUS_CONFIG_INVALID_TYPE:
+		desc = "config invalid type";
+		break;
+	case MPI2_IOCSTATUS_CONFIG_INVALID_PAGE:
+		desc = "config invalid page";
+		break;
+	case MPI2_IOCSTATUS_CONFIG_INVALID_DATA:
+		desc = "config invalid data";
+		break;
+	case MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS:
+		desc = "config no defaults";
+		break;
+	case MPI2_IOCSTATUS_CONFIG_CANT_COMMIT:
+		desc = "config can't commit";
+		break;
+
+/****************************************************************************
+*  SCSI IO Reply
+****************************************************************************/
+
+	case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
+	case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE:
+	case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
+	case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
+	case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
+	case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
+	case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
+	case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
+	case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
+	case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
+	case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
+	case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
+		break;
+
+/****************************************************************************
+*  For use by SCSI Initiator and SCSI Target end-to-end data protection
+****************************************************************************/
+
+	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+		desc = "eedp guard error";
+		break;
+	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+		desc = "eedp ref tag error";
+		break;
+	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+		desc = "eedp app tag error";
+		break;
+
+/****************************************************************************
+*  SCSI Target values
+****************************************************************************/
+
+	case MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX:
+		desc = "target invalid io index";
+		break;
+	case MPI2_IOCSTATUS_TARGET_ABORTED:
+		desc = "target aborted";
+		break;
+	case MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE:
+		desc = "target no conn retryable";
+		break;
+	case MPI2_IOCSTATUS_TARGET_NO_CONNECTION:
+		desc = "target no connection";
+		break;
+	case MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH:
+		desc = "target xfer count mismatch";
+		break;
+	case MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR:
+		desc = "target data offset error";
+		break;
+	case MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA:
+		desc = "target too much write data";
+		break;
+	case MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT:
+		desc = "target iu too short";
+		break;
+	case MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT:
+		desc = "target ack nak timeout";
+		break;
+	case MPI2_IOCSTATUS_TARGET_NAK_RECEIVED:
+		desc = "target nak received";
+		break;
+
+/****************************************************************************
+*  Serial Attached SCSI values
+****************************************************************************/
+
+	case MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED:
+		desc = "smp request failed";
+		break;
+	case MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN:
+		desc = "smp data overrun";
+		break;
+
+/****************************************************************************
+*  Diagnostic Buffer Post / Diagnostic Release values
+****************************************************************************/
+
+	case MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED:
+		desc = "diagnostic released";
+		break;
+	default:
+		break;
+	}
+
+	if (!desc)
+		return;
+
+	switch (request_hdr->Function) {
+	case MPI2_FUNCTION_CONFIG:
+		frame_sz = sizeof(Mpi2ConfigRequest_t) + ioc->sge_size;
+		func_str = "config_page";
+		break;
+	case MPI2_FUNCTION_SCSI_TASK_MGMT:
+		frame_sz = sizeof(Mpi2SCSITaskManagementRequest_t);
+		func_str = "task_mgmt";
+		break;
+	case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
+		frame_sz = sizeof(Mpi2SasIoUnitControlRequest_t);
+		func_str = "sas_iounit_ctl";
+		break;
+	case MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR:
+		frame_sz = sizeof(Mpi2SepRequest_t);
+		func_str = "enclosure";
+		break;
+	case MPI2_FUNCTION_IOC_INIT:
+		frame_sz = sizeof(Mpi2IOCInitRequest_t);
+		func_str = "ioc_init";
+		break;
+	case MPI2_FUNCTION_PORT_ENABLE:
+		frame_sz = sizeof(Mpi2PortEnableRequest_t);
+		func_str = "port_enable";
+		break;
+	case MPI2_FUNCTION_SMP_PASSTHROUGH:
+		frame_sz = sizeof(Mpi2SmpPassthroughRequest_t) + ioc->sge_size;
+		func_str = "smp_passthru";
+		break;
+	case MPI2_FUNCTION_NVME_ENCAPSULATED:
+		frame_sz = sizeof(Mpi26NVMeEncapsulatedRequest_t) +
+		    ioc->sge_size;
+		func_str = "nvme_encapsulated";
+		break;
+	default:
+		frame_sz = 32;
+		func_str = "unknown";
+		break;
+	}
+
+	ioc_warn(ioc, "ioc_status: %s(0x%04x), request(0x%p),(%s)\n",
+		 desc, ioc_status, request_hdr, func_str);
+
+	_debug_dump_mf(request_hdr, frame_sz/4);
+}
+
+/**
+ * _base_display_event_data - verbose translation of firmware asyn events
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ */
+static void
+_base_display_event_data(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventNotificationReply_t *mpi_reply)
+{
+	char *desc = NULL;
+	u16 event;
+
+	if (!(ioc->logging_level & MPT_DEBUG_EVENTS))
+		return;
+
+	event = le16_to_cpu(mpi_reply->Event);
+
+	switch (event) {
+	case MPI2_EVENT_LOG_DATA:
+		desc = "Log Data";
+		break;
+	case MPI2_EVENT_STATE_CHANGE:
+		desc = "Status Change";
+		break;
+	case MPI2_EVENT_HARD_RESET_RECEIVED:
+		desc = "Hard Reset Received";
+		break;
+	case MPI2_EVENT_EVENT_CHANGE:
+		desc = "Event Change";
+		break;
+	case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
+		desc = "Device Status Change";
+		break;
+	case MPI2_EVENT_IR_OPERATION_STATUS:
+		if (!ioc->hide_ir_msg)
+			desc = "IR Operation Status";
+		break;
+	case MPI2_EVENT_SAS_DISCOVERY:
+	{
+		Mpi2EventDataSasDiscovery_t *event_data =
+		    (Mpi2EventDataSasDiscovery_t *)mpi_reply->EventData;
+		ioc_info(ioc, "Discovery: (%s)",
+			 event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED ?
+			 "start" : "stop");
+		if (event_data->DiscoveryStatus)
+			pr_cont(" discovery_status(0x%08x)",
+			    le32_to_cpu(event_data->DiscoveryStatus));
+		pr_cont("\n");
+		return;
+	}
+	case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
+		desc = "SAS Broadcast Primitive";
+		break;
+	case MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
+		desc = "SAS Init Device Status Change";
+		break;
+	case MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW:
+		desc = "SAS Init Table Overflow";
+		break;
+	case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
+		desc = "SAS Topology Change List";
+		break;
+	case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
+		desc = "SAS Enclosure Device Status Change";
+		break;
+	case MPI2_EVENT_IR_VOLUME:
+		if (!ioc->hide_ir_msg)
+			desc = "IR Volume";
+		break;
+	case MPI2_EVENT_IR_PHYSICAL_DISK:
+		if (!ioc->hide_ir_msg)
+			desc = "IR Physical Disk";
+		break;
+	case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
+		if (!ioc->hide_ir_msg)
+			desc = "IR Configuration Change List";
+		break;
+	case MPI2_EVENT_LOG_ENTRY_ADDED:
+		if (!ioc->hide_ir_msg)
+			desc = "Log Entry Added";
+		break;
+	case MPI2_EVENT_TEMP_THRESHOLD:
+		desc = "Temperature Threshold";
+		break;
+	case MPI2_EVENT_ACTIVE_CABLE_EXCEPTION:
+		desc = "Cable Event";
+		break;
+	case MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR:
+		desc = "SAS Device Discovery Error";
+		break;
+	case MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE:
+		desc = "PCIE Device Status Change";
+		break;
+	case MPI2_EVENT_PCIE_ENUMERATION:
+	{
+		Mpi26EventDataPCIeEnumeration_t *event_data =
+			(Mpi26EventDataPCIeEnumeration_t *)mpi_reply->EventData;
+		ioc_info(ioc, "PCIE Enumeration: (%s)",
+			 event_data->ReasonCode == MPI26_EVENT_PCIE_ENUM_RC_STARTED ?
+			 "start" : "stop");
+		if (event_data->EnumerationStatus)
+			pr_cont("enumeration_status(0x%08x)",
+				le32_to_cpu(event_data->EnumerationStatus));
+		pr_cont("\n");
+		return;
+	}
+	case MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST:
+		desc = "PCIE Topology Change List";
+		break;
+	}
+
+	if (!desc)
+		return;
+
+	ioc_info(ioc, "%s\n", desc);
+}
+
+/**
+ * _base_sas_log_info - verbose translation of firmware log info
+ * @ioc: per adapter object
+ * @log_info: log info
+ */
+static void
+_base_sas_log_info(struct MPT3SAS_ADAPTER *ioc, u32 log_info)
+{
+	union loginfo_type {
+		u32	loginfo;
+		struct {
+			u32	subcode:16;
+			u32	code:8;
+			u32	originator:4;
+			u32	bus_type:4;
+		} dw;
+	};
+	union loginfo_type sas_loginfo;
+	char *originator_str = NULL;
+
+	sas_loginfo.loginfo = log_info;
+	if (sas_loginfo.dw.bus_type != 3 /*SAS*/)
+		return;
+
+	/* each nexus loss loginfo */
+	if (log_info == 0x31170000)
+		return;
+
+	/* eat the loginfos associated with task aborts */
+	if (ioc->ignore_loginfos && (log_info == 0x30050000 || log_info ==
+	    0x31140000 || log_info == 0x31130000))
+		return;
+
+	switch (sas_loginfo.dw.originator) {
+	case 0:
+		originator_str = "IOP";
+		break;
+	case 1:
+		originator_str = "PL";
+		break;
+	case 2:
+		if (!ioc->hide_ir_msg)
+			originator_str = "IR";
+		else
+			originator_str = "WarpDrive";
+		break;
+	}
+
+	ioc_warn(ioc, "log_info(0x%08x): originator(%s), code(0x%02x), sub_code(0x%04x)\n",
+		 log_info,
+		 originator_str, sas_loginfo.dw.code, sas_loginfo.dw.subcode);
+}
+
+/**
+ * _base_display_reply_info - handle reply descriptors depending on IOC Status
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame (lower 32bit addr)
+ */
+static void
+_base_display_reply_info(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply)
+{
+	MPI2DefaultReply_t *mpi_reply;
+	u16 ioc_status;
+	u32 loginfo = 0;
+
+	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	if (unlikely(!mpi_reply)) {
+		ioc_err(ioc, "mpi_reply not valid at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return;
+	}
+	ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
+
+	if ((ioc_status & MPI2_IOCSTATUS_MASK) &&
+	    (ioc->logging_level & MPT_DEBUG_REPLY)) {
+		_base_sas_ioc_info(ioc, mpi_reply,
+		   mpt3sas_base_get_msg_frame(ioc, smid));
+	}
+
+	if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
+		loginfo = le32_to_cpu(mpi_reply->IOCLogInfo);
+		_base_sas_log_info(ioc, loginfo);
+	}
+
+	if (ioc_status || loginfo) {
+		ioc_status &= MPI2_IOCSTATUS_MASK;
+		mpt3sas_trigger_mpi(ioc, ioc_status, loginfo);
+	}
+}
+
+/**
+ * mpt3sas_base_done - base internal command completion routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Return:
+ * 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
+ */
+u8
+mpt3sas_base_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply)
+{
+	MPI2DefaultReply_t *mpi_reply;
+
+	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK)
+		return mpt3sas_check_for_pending_internal_cmds(ioc, smid);
+
+	if (ioc->base_cmds.status == MPT3_CMD_NOT_USED)
+		return 1;
+
+	ioc->base_cmds.status |= MPT3_CMD_COMPLETE;
+	if (mpi_reply) {
+		ioc->base_cmds.status |= MPT3_CMD_REPLY_VALID;
+		memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
+	}
+	ioc->base_cmds.status &= ~MPT3_CMD_PENDING;
+
+	complete(&ioc->base_cmds.done);
+	return 1;
+}
+
+/**
+ * _base_async_event - main callback handler for firmware asyn events
+ * @ioc: per adapter object
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Return:
+ * 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
+ */
+static u8
+_base_async_event(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, u32 reply)
+{
+	Mpi2EventNotificationReply_t *mpi_reply;
+	Mpi2EventAckRequest_t *ack_request;
+	u16 smid;
+	struct _event_ack_list *delayed_event_ack;
+
+	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	if (!mpi_reply)
+		return 1;
+	if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION)
+		return 1;
+
+	_base_display_event_data(ioc, mpi_reply);
+
+	if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED))
+		goto out;
+	smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
+	if (!smid) {
+		delayed_event_ack = kzalloc(sizeof(*delayed_event_ack),
+					GFP_ATOMIC);
+		if (!delayed_event_ack)
+			goto out;
+		INIT_LIST_HEAD(&delayed_event_ack->list);
+		delayed_event_ack->Event = mpi_reply->Event;
+		delayed_event_ack->EventContext = mpi_reply->EventContext;
+		list_add_tail(&delayed_event_ack->list,
+				&ioc->delayed_event_ack_list);
+		dewtprintk(ioc,
+			   ioc_info(ioc, "DELAYED: EVENT ACK: event (0x%04x)\n",
+				    le16_to_cpu(mpi_reply->Event)));
+		goto out;
+	}
+
+	ack_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	memset(ack_request, 0, sizeof(Mpi2EventAckRequest_t));
+	ack_request->Function = MPI2_FUNCTION_EVENT_ACK;
+	ack_request->Event = mpi_reply->Event;
+	ack_request->EventContext = mpi_reply->EventContext;
+	ack_request->VF_ID = 0;  /* TODO */
+	ack_request->VP_ID = 0;
+	ioc->put_smid_default(ioc, smid);
+
+ out:
+
+	/* scsih callback handler */
+	mpt3sas_scsih_event_callback(ioc, msix_index, reply);
+
+	/* ctl callback handler */
+	mpt3sas_ctl_event_callback(ioc, msix_index, reply);
+
+	return 1;
+}
+
+static struct scsiio_tracker *
+_get_st_from_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	struct scsi_cmnd *cmd;
+
+	if (WARN_ON(!smid) ||
+	    WARN_ON(smid >= ioc->hi_priority_smid))
+		return NULL;
+
+	cmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid);
+	if (cmd)
+		return scsi_cmd_priv(cmd);
+
+	return NULL;
+}
+
+/**
+ * _base_get_cb_idx - obtain the callback index
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return: callback index.
+ */
+static u8
+_base_get_cb_idx(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	int i;
+	u16 ctl_smid = ioc->scsiio_depth - INTERNAL_SCSIIO_CMDS_COUNT + 1;
+	u8 cb_idx = 0xFF;
+
+	if (smid < ioc->hi_priority_smid) {
+		struct scsiio_tracker *st;
+
+		if (smid < ctl_smid) {
+			st = _get_st_from_smid(ioc, smid);
+			if (st)
+				cb_idx = st->cb_idx;
+		} else if (smid == ctl_smid)
+			cb_idx = ioc->ctl_cb_idx;
+	} else if (smid < ioc->internal_smid) {
+		i = smid - ioc->hi_priority_smid;
+		cb_idx = ioc->hpr_lookup[i].cb_idx;
+	} else if (smid <= ioc->hba_queue_depth) {
+		i = smid - ioc->internal_smid;
+		cb_idx = ioc->internal_lookup[i].cb_idx;
+	}
+	return cb_idx;
+}
+
+/**
+ * mpt3sas_base_pause_mq_polling - pause polling on the mq poll queues
+ *				when driver is flushing out the IOs.
+ * @ioc: per adapter object
+ *
+ * Pause polling on the mq poll (io uring) queues when driver is flushing
+ * out the IOs. Otherwise we may see the race condition of completing the same
+ * IO from two paths.
+ *
+ * Returns nothing.
+ */
+void
+mpt3sas_base_pause_mq_polling(struct MPT3SAS_ADAPTER *ioc)
+{
+	int iopoll_q_count =
+	    ioc->reply_queue_count - ioc->iopoll_q_start_index;
+	int qid;
+
+	for (qid = 0; qid < iopoll_q_count; qid++)
+		atomic_set(&ioc->io_uring_poll_queues[qid].pause, 1);
+
+	/*
+	 * wait for current poll to complete.
+	 */
+	for (qid = 0; qid < iopoll_q_count; qid++) {
+		while (atomic_read(&ioc->io_uring_poll_queues[qid].busy)) {
+			cpu_relax();
+			udelay(500);
+		}
+	}
+}
+
+/**
+ * mpt3sas_base_resume_mq_polling - Resume polling on mq poll queues.
+ * @ioc: per adapter object
+ *
+ * Returns nothing.
+ */
+void
+mpt3sas_base_resume_mq_polling(struct MPT3SAS_ADAPTER *ioc)
+{
+	int iopoll_q_count =
+	    ioc->reply_queue_count - ioc->iopoll_q_start_index;
+	int qid;
+
+	for (qid = 0; qid < iopoll_q_count; qid++)
+		atomic_set(&ioc->io_uring_poll_queues[qid].pause, 0);
+}
+
+/**
+ * mpt3sas_base_mask_interrupts - disable interrupts
+ * @ioc: per adapter object
+ *
+ * Disabling ResetIRQ, Reply and Doorbell Interrupts
+ */
+void
+mpt3sas_base_mask_interrupts(struct MPT3SAS_ADAPTER *ioc)
+{
+	u32 him_register;
+
+	ioc->mask_interrupts = 1;
+	him_register = ioc->base_readl(&ioc->chip->HostInterruptMask);
+	him_register |= MPI2_HIM_DIM + MPI2_HIM_RIM + MPI2_HIM_RESET_IRQ_MASK;
+	writel(him_register, &ioc->chip->HostInterruptMask);
+	ioc->base_readl(&ioc->chip->HostInterruptMask);
+}
+
+/**
+ * mpt3sas_base_unmask_interrupts - enable interrupts
+ * @ioc: per adapter object
+ *
+ * Enabling only Reply Interrupts
+ */
+void
+mpt3sas_base_unmask_interrupts(struct MPT3SAS_ADAPTER *ioc)
+{
+	u32 him_register;
+
+	him_register = ioc->base_readl(&ioc->chip->HostInterruptMask);
+	him_register &= ~MPI2_HIM_RIM;
+	writel(him_register, &ioc->chip->HostInterruptMask);
+	ioc->mask_interrupts = 0;
+}
+
+union reply_descriptor {
+	u64 word;
+	struct {
+		u32 low;
+		u32 high;
+	} u;
+};
+
+static u32 base_mod64(u64 dividend, u32 divisor)
+{
+	u32 remainder;
+
+	if (!divisor)
+		pr_err("mpt3sas: DIVISOR is zero, in div fn\n");
+	remainder = do_div(dividend, divisor);
+	return remainder;
+}
+
+/**
+ * _base_process_reply_queue - Process reply descriptors from reply
+ *		descriptor post queue.
+ * @reply_q: per IRQ's reply queue object.
+ *
+ * Return: number of reply descriptors processed from reply
+ *		descriptor queue.
+ */
+static int
+_base_process_reply_queue(struct adapter_reply_queue *reply_q)
+{
+	union reply_descriptor rd;
+	u64 completed_cmds;
+	u8 request_descript_type;
+	u16 smid;
+	u8 cb_idx;
+	u32 reply;
+	u8 msix_index = reply_q->msix_index;
+	struct MPT3SAS_ADAPTER *ioc = reply_q->ioc;
+	Mpi2ReplyDescriptorsUnion_t *rpf;
+	u8 rc;
+
+	completed_cmds = 0;
+	if (!atomic_add_unless(&reply_q->busy, 1, 1))
+		return completed_cmds;
+
+	rpf = &reply_q->reply_post_free[reply_q->reply_post_host_index];
+	request_descript_type = rpf->Default.ReplyFlags
+	     & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
+	if (request_descript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) {
+		atomic_dec(&reply_q->busy);
+		return completed_cmds;
+	}
+
+	cb_idx = 0xFF;
+	do {
+		rd.word = le64_to_cpu(rpf->Words);
+		if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX)
+			goto out;
+		reply = 0;
+		smid = le16_to_cpu(rpf->Default.DescriptorTypeDependent1);
+		if (request_descript_type ==
+		    MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS ||
+		    request_descript_type ==
+		    MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS ||
+		    request_descript_type ==
+		    MPI26_RPY_DESCRIPT_FLAGS_PCIE_ENCAPSULATED_SUCCESS) {
+			cb_idx = _base_get_cb_idx(ioc, smid);
+			if ((likely(cb_idx < MPT_MAX_CALLBACKS)) &&
+			    (likely(mpt_callbacks[cb_idx] != NULL))) {
+				rc = mpt_callbacks[cb_idx](ioc, smid,
+				    msix_index, 0);
+				if (rc)
+					mpt3sas_base_free_smid(ioc, smid);
+			}
+		} else if (request_descript_type ==
+		    MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) {
+			reply = le32_to_cpu(
+			    rpf->AddressReply.ReplyFrameAddress);
+			if (reply > ioc->reply_dma_max_address ||
+			    reply < ioc->reply_dma_min_address)
+				reply = 0;
+			if (smid) {
+				cb_idx = _base_get_cb_idx(ioc, smid);
+				if ((likely(cb_idx < MPT_MAX_CALLBACKS)) &&
+				    (likely(mpt_callbacks[cb_idx] != NULL))) {
+					rc = mpt_callbacks[cb_idx](ioc, smid,
+					    msix_index, reply);
+					if (reply)
+						_base_display_reply_info(ioc,
+						    smid, msix_index, reply);
+					if (rc)
+						mpt3sas_base_free_smid(ioc,
+						    smid);
+				}
+			} else {
+				_base_async_event(ioc, msix_index, reply);
+			}
+
+			/* reply free queue handling */
+			if (reply) {
+				ioc->reply_free_host_index =
+				    (ioc->reply_free_host_index ==
+				    (ioc->reply_free_queue_depth - 1)) ?
+				    0 : ioc->reply_free_host_index + 1;
+				ioc->reply_free[ioc->reply_free_host_index] =
+				    cpu_to_le32(reply);
+				if (ioc->is_mcpu_endpoint)
+					_base_clone_reply_to_sys_mem(ioc,
+						reply,
+						ioc->reply_free_host_index);
+				writel(ioc->reply_free_host_index,
+				    &ioc->chip->ReplyFreeHostIndex);
+			}
+		}
+
+		rpf->Words = cpu_to_le64(ULLONG_MAX);
+		reply_q->reply_post_host_index =
+		    (reply_q->reply_post_host_index ==
+		    (ioc->reply_post_queue_depth - 1)) ? 0 :
+		    reply_q->reply_post_host_index + 1;
+		request_descript_type =
+		    reply_q->reply_post_free[reply_q->reply_post_host_index].
+		    Default.ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
+		completed_cmds++;
+		/* Update the reply post host index after continuously
+		 * processing the threshold number of Reply Descriptors.
+		 * So that FW can find enough entries to post the Reply
+		 * Descriptors in the reply descriptor post queue.
+		 */
+		if (completed_cmds >= ioc->thresh_hold) {
+			if (ioc->combined_reply_queue) {
+				writel(reply_q->reply_post_host_index |
+						((msix_index  & 7) <<
+						 MPI2_RPHI_MSIX_INDEX_SHIFT),
+				    ioc->replyPostRegisterIndex[msix_index/8]);
+			} else {
+				writel(reply_q->reply_post_host_index |
+						(msix_index <<
+						 MPI2_RPHI_MSIX_INDEX_SHIFT),
+						&ioc->chip->ReplyPostHostIndex);
+			}
+			if (!reply_q->is_iouring_poll_q &&
+			    !reply_q->irq_poll_scheduled) {
+				reply_q->irq_poll_scheduled = true;
+				irq_poll_sched(&reply_q->irqpoll);
+			}
+			atomic_dec(&reply_q->busy);
+			return completed_cmds;
+		}
+		if (request_descript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
+			goto out;
+		if (!reply_q->reply_post_host_index)
+			rpf = reply_q->reply_post_free;
+		else
+			rpf++;
+	} while (1);
+
+ out:
+
+	if (!completed_cmds) {
+		atomic_dec(&reply_q->busy);
+		return completed_cmds;
+	}
+
+	if (ioc->is_warpdrive) {
+		writel(reply_q->reply_post_host_index,
+		ioc->reply_post_host_index[msix_index]);
+		atomic_dec(&reply_q->busy);
+		return completed_cmds;
+	}
+
+	/* Update Reply Post Host Index.
+	 * For those HBA's which support combined reply queue feature
+	 * 1. Get the correct Supplemental Reply Post Host Index Register.
+	 *    i.e. (msix_index / 8)th entry from Supplemental Reply Post Host
+	 *    Index Register address bank i.e replyPostRegisterIndex[],
+	 * 2. Then update this register with new reply host index value
+	 *    in ReplyPostIndex field and the MSIxIndex field with
+	 *    msix_index value reduced to a value between 0 and 7,
+	 *    using a modulo 8 operation. Since each Supplemental Reply Post
+	 *    Host Index Register supports 8 MSI-X vectors.
+	 *
+	 * For other HBA's just update the Reply Post Host Index register with
+	 * new reply host index value in ReplyPostIndex Field and msix_index
+	 * value in MSIxIndex field.
+	 */
+	if (ioc->combined_reply_queue)
+		writel(reply_q->reply_post_host_index | ((msix_index  & 7) <<
+			MPI2_RPHI_MSIX_INDEX_SHIFT),
+			ioc->replyPostRegisterIndex[msix_index/8]);
+	else
+		writel(reply_q->reply_post_host_index | (msix_index <<
+			MPI2_RPHI_MSIX_INDEX_SHIFT),
+			&ioc->chip->ReplyPostHostIndex);
+	atomic_dec(&reply_q->busy);
+	return completed_cmds;
+}
+
+/**
+ * mpt3sas_blk_mq_poll - poll the blk mq poll queue
+ * @shost: Scsi_Host object
+ * @queue_num: hw ctx queue number
+ *
+ * Return number of entries that has been processed from poll queue.
+ */
+int mpt3sas_blk_mq_poll(struct Scsi_Host *shost, unsigned int queue_num)
+{
+	struct MPT3SAS_ADAPTER *ioc =
+	    (struct MPT3SAS_ADAPTER *)shost->hostdata;
+	struct adapter_reply_queue *reply_q;
+	int num_entries = 0;
+	int qid = queue_num - ioc->iopoll_q_start_index;
+
+	if (atomic_read(&ioc->io_uring_poll_queues[qid].pause) ||
+	    !atomic_add_unless(&ioc->io_uring_poll_queues[qid].busy, 1, 1))
+		return 0;
+
+	reply_q = ioc->io_uring_poll_queues[qid].reply_q;
+
+	num_entries = _base_process_reply_queue(reply_q);
+	atomic_dec(&ioc->io_uring_poll_queues[qid].busy);
+
+	return num_entries;
+}
+
+/**
+ * _base_interrupt - MPT adapter (IOC) specific interrupt handler.
+ * @irq: irq number (not used)
+ * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
+ *
+ * Return: IRQ_HANDLED if processed, else IRQ_NONE.
+ */
+static irqreturn_t
+_base_interrupt(int irq, void *bus_id)
+{
+	struct adapter_reply_queue *reply_q = bus_id;
+	struct MPT3SAS_ADAPTER *ioc = reply_q->ioc;
+
+	if (ioc->mask_interrupts)
+		return IRQ_NONE;
+	if (reply_q->irq_poll_scheduled)
+		return IRQ_HANDLED;
+	return ((_base_process_reply_queue(reply_q) > 0) ?
+			IRQ_HANDLED : IRQ_NONE);
+}
+
+/**
+ * _base_irqpoll - IRQ poll callback handler
+ * @irqpoll: irq_poll object
+ * @budget: irq poll weight
+ *
+ * Return: number of reply descriptors processed
+ */
+static int
+_base_irqpoll(struct irq_poll *irqpoll, int budget)
+{
+	struct adapter_reply_queue *reply_q;
+	int num_entries = 0;
+
+	reply_q = container_of(irqpoll, struct adapter_reply_queue,
+			irqpoll);
+	if (reply_q->irq_line_enable) {
+		disable_irq_nosync(reply_q->os_irq);
+		reply_q->irq_line_enable = false;
+	}
+	num_entries = _base_process_reply_queue(reply_q);
+	if (num_entries < budget) {
+		irq_poll_complete(irqpoll);
+		reply_q->irq_poll_scheduled = false;
+		reply_q->irq_line_enable = true;
+		enable_irq(reply_q->os_irq);
+		/*
+		 * Go for one more round of processing the
+		 * reply descriptor post queue in case the HBA
+		 * Firmware has posted some reply descriptors
+		 * while reenabling the IRQ.
+		 */
+		_base_process_reply_queue(reply_q);
+	}
+
+	return num_entries;
+}
+
+/**
+ * _base_init_irqpolls - initliaze IRQ polls
+ * @ioc: per adapter object
+ *
+ * Return: nothing
+ */
+static void
+_base_init_irqpolls(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct adapter_reply_queue *reply_q, *next;
+
+	if (list_empty(&ioc->reply_queue_list))
+		return;
+
+	list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) {
+		if (reply_q->is_iouring_poll_q)
+			continue;
+		irq_poll_init(&reply_q->irqpoll,
+			ioc->hba_queue_depth/4, _base_irqpoll);
+		reply_q->irq_poll_scheduled = false;
+		reply_q->irq_line_enable = true;
+		reply_q->os_irq = pci_irq_vector(ioc->pdev,
+		    reply_q->msix_index);
+	}
+}
+
+/**
+ * _base_is_controller_msix_enabled - is controller support muli-reply queues
+ * @ioc: per adapter object
+ *
+ * Return: Whether or not MSI/X is enabled.
+ */
+static inline int
+_base_is_controller_msix_enabled(struct MPT3SAS_ADAPTER *ioc)
+{
+	return (ioc->facts.IOCCapabilities &
+	    MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable;
+}
+
+/**
+ * mpt3sas_base_sync_reply_irqs - flush pending MSIX interrupts
+ * @ioc: per adapter object
+ * @poll: poll over reply descriptor pools incase interrupt for
+ *		timed-out SCSI command got delayed
+ * Context: non-ISR context
+ *
+ * Called when a Task Management request has completed.
+ */
+void
+mpt3sas_base_sync_reply_irqs(struct MPT3SAS_ADAPTER *ioc, u8 poll)
+{
+	struct adapter_reply_queue *reply_q;
+
+	/* If MSIX capability is turned off
+	 * then multi-queues are not enabled
+	 */
+	if (!_base_is_controller_msix_enabled(ioc))
+		return;
+
+	list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+		if (ioc->shost_recovery || ioc->remove_host ||
+				ioc->pci_error_recovery)
+			return;
+		/* TMs are on msix_index == 0 */
+		if (reply_q->msix_index == 0)
+			continue;
+
+		if (reply_q->is_iouring_poll_q) {
+			_base_process_reply_queue(reply_q);
+			continue;
+		}
+
+		synchronize_irq(pci_irq_vector(ioc->pdev, reply_q->msix_index));
+		if (reply_q->irq_poll_scheduled) {
+			/* Calling irq_poll_disable will wait for any pending
+			 * callbacks to have completed.
+			 */
+			irq_poll_disable(&reply_q->irqpoll);
+			irq_poll_enable(&reply_q->irqpoll);
+			/* check how the scheduled poll has ended,
+			 * clean up only if necessary
+			 */
+			if (reply_q->irq_poll_scheduled) {
+				reply_q->irq_poll_scheduled = false;
+				reply_q->irq_line_enable = true;
+				enable_irq(reply_q->os_irq);
+			}
+		}
+
+		if (poll)
+			_base_process_reply_queue(reply_q);
+	}
+}
+
+/**
+ * mpt3sas_base_release_callback_handler - clear interrupt callback handler
+ * @cb_idx: callback index
+ */
+void
+mpt3sas_base_release_callback_handler(u8 cb_idx)
+{
+	mpt_callbacks[cb_idx] = NULL;
+}
+
+/**
+ * mpt3sas_base_register_callback_handler - obtain index for the interrupt callback handler
+ * @cb_func: callback function
+ *
+ * Return: Index of @cb_func.
+ */
+u8
+mpt3sas_base_register_callback_handler(MPT_CALLBACK cb_func)
+{
+	u8 cb_idx;
+
+	for (cb_idx = MPT_MAX_CALLBACKS-1; cb_idx; cb_idx--)
+		if (mpt_callbacks[cb_idx] == NULL)
+			break;
+
+	mpt_callbacks[cb_idx] = cb_func;
+	return cb_idx;
+}
+
+/**
+ * mpt3sas_base_initialize_callback_handler - initialize the interrupt callback handler
+ */
+void
+mpt3sas_base_initialize_callback_handler(void)
+{
+	u8 cb_idx;
+
+	for (cb_idx = 0; cb_idx < MPT_MAX_CALLBACKS; cb_idx++)
+		mpt3sas_base_release_callback_handler(cb_idx);
+}
+
+
+/**
+ * _base_build_zero_len_sge - build zero length sg entry
+ * @ioc: per adapter object
+ * @paddr: virtual address for SGE
+ *
+ * Create a zero length scatter gather entry to insure the IOCs hardware has
+ * something to use if the target device goes brain dead and tries
+ * to send data even when none is asked for.
+ */
+static void
+_base_build_zero_len_sge(struct MPT3SAS_ADAPTER *ioc, void *paddr)
+{
+	u32 flags_length = (u32)((MPI2_SGE_FLAGS_LAST_ELEMENT |
+	    MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST |
+	    MPI2_SGE_FLAGS_SIMPLE_ELEMENT) <<
+	    MPI2_SGE_FLAGS_SHIFT);
+	ioc->base_add_sg_single(paddr, flags_length, -1);
+}
+
+/**
+ * _base_add_sg_single_32 - Place a simple 32 bit SGE at address pAddr.
+ * @paddr: virtual address for SGE
+ * @flags_length: SGE flags and data transfer length
+ * @dma_addr: Physical address
+ */
+static void
+_base_add_sg_single_32(void *paddr, u32 flags_length, dma_addr_t dma_addr)
+{
+	Mpi2SGESimple32_t *sgel = paddr;
+
+	flags_length |= (MPI2_SGE_FLAGS_32_BIT_ADDRESSING |
+	    MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT;
+	sgel->FlagsLength = cpu_to_le32(flags_length);
+	sgel->Address = cpu_to_le32(dma_addr);
+}
+
+
+/**
+ * _base_add_sg_single_64 - Place a simple 64 bit SGE at address pAddr.
+ * @paddr: virtual address for SGE
+ * @flags_length: SGE flags and data transfer length
+ * @dma_addr: Physical address
+ */
+static void
+_base_add_sg_single_64(void *paddr, u32 flags_length, dma_addr_t dma_addr)
+{
+	Mpi2SGESimple64_t *sgel = paddr;
+
+	flags_length |= (MPI2_SGE_FLAGS_64_BIT_ADDRESSING |
+	    MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT;
+	sgel->FlagsLength = cpu_to_le32(flags_length);
+	sgel->Address = cpu_to_le64(dma_addr);
+}
+
+/**
+ * _base_get_chain_buffer_tracker - obtain chain tracker
+ * @ioc: per adapter object
+ * @scmd: SCSI commands of the IO request
+ *
+ * Return: chain tracker from chain_lookup table using key as
+ * smid and smid's chain_offset.
+ */
+static struct chain_tracker *
+_base_get_chain_buffer_tracker(struct MPT3SAS_ADAPTER *ioc,
+			       struct scsi_cmnd *scmd)
+{
+	struct chain_tracker *chain_req;
+	struct scsiio_tracker *st = scsi_cmd_priv(scmd);
+	u16 smid = st->smid;
+	u8 chain_offset =
+	   atomic_read(&ioc->chain_lookup[smid - 1].chain_offset);
+
+	if (chain_offset == ioc->chains_needed_per_io)
+		return NULL;
+
+	chain_req = &ioc->chain_lookup[smid - 1].chains_per_smid[chain_offset];
+	atomic_inc(&ioc->chain_lookup[smid - 1].chain_offset);
+	return chain_req;
+}
+
+
+/**
+ * _base_build_sg - build generic sg
+ * @ioc: per adapter object
+ * @psge: virtual address for SGE
+ * @data_out_dma: physical address for WRITES
+ * @data_out_sz: data xfer size for WRITES
+ * @data_in_dma: physical address for READS
+ * @data_in_sz: data xfer size for READS
+ */
+static void
+_base_build_sg(struct MPT3SAS_ADAPTER *ioc, void *psge,
+	dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma,
+	size_t data_in_sz)
+{
+	u32 sgl_flags;
+
+	if (!data_out_sz && !data_in_sz) {
+		_base_build_zero_len_sge(ioc, psge);
+		return;
+	}
+
+	if (data_out_sz && data_in_sz) {
+		/* WRITE sgel first */
+		sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+		    MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
+		sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+		ioc->base_add_sg_single(psge, sgl_flags |
+		    data_out_sz, data_out_dma);
+
+		/* incr sgel */
+		psge += ioc->sge_size;
+
+		/* READ sgel last */
+		sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+		    MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
+		    MPI2_SGE_FLAGS_END_OF_LIST);
+		sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+		ioc->base_add_sg_single(psge, sgl_flags |
+		    data_in_sz, data_in_dma);
+	} else if (data_out_sz) /* WRITE */ {
+		sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+		    MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
+		    MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC);
+		sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+		ioc->base_add_sg_single(psge, sgl_flags |
+		    data_out_sz, data_out_dma);
+	} else if (data_in_sz) /* READ */ {
+		sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+		    MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
+		    MPI2_SGE_FLAGS_END_OF_LIST);
+		sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+		ioc->base_add_sg_single(psge, sgl_flags |
+		    data_in_sz, data_in_dma);
+	}
+}
+
+/* IEEE format sgls */
+
+/**
+ * _base_build_nvme_prp - This function is called for NVMe end devices to build
+ *                        a native SGL (NVMe PRP).
+ * @ioc: per adapter object
+ * @smid: system request message index for getting asscociated SGL
+ * @nvme_encap_request: the NVMe request msg frame pointer
+ * @data_out_dma: physical address for WRITES
+ * @data_out_sz: data xfer size for WRITES
+ * @data_in_dma: physical address for READS
+ * @data_in_sz: data xfer size for READS
+ *
+ * The native SGL is built starting in the first PRP
+ * entry of the NVMe message (PRP1).  If the data buffer is small enough to be
+ * described entirely using PRP1, then PRP2 is not used.  If needed, PRP2 is
+ * used to describe a larger data buffer.  If the data buffer is too large to
+ * describe using the two PRP entriess inside the NVMe message, then PRP1
+ * describes the first data memory segment, and PRP2 contains a pointer to a PRP
+ * list located elsewhere in memory to describe the remaining data memory
+ * segments.  The PRP list will be contiguous.
+ *
+ * The native SGL for NVMe devices is a Physical Region Page (PRP).  A PRP
+ * consists of a list of PRP entries to describe a number of noncontigous
+ * physical memory segments as a single memory buffer, just as a SGL does.  Note
+ * however, that this function is only used by the IOCTL call, so the memory
+ * given will be guaranteed to be contiguous.  There is no need to translate
+ * non-contiguous SGL into a PRP in this case.  All PRPs will describe
+ * contiguous space that is one page size each.
+ *
+ * Each NVMe message contains two PRP entries.  The first (PRP1) either contains
+ * a PRP list pointer or a PRP element, depending upon the command.  PRP2
+ * contains the second PRP element if the memory being described fits within 2
+ * PRP entries, or a PRP list pointer if the PRP spans more than two entries.
+ *
+ * A PRP list pointer contains the address of a PRP list, structured as a linear
+ * array of PRP entries.  Each PRP entry in this list describes a segment of
+ * physical memory.
+ *
+ * Each 64-bit PRP entry comprises an address and an offset field.  The address
+ * always points at the beginning of a 4KB physical memory page, and the offset
+ * describes where within that 4KB page the memory segment begins.  Only the
+ * first element in a PRP list may contain a non-zero offset, implying that all
+ * memory segments following the first begin at the start of a 4KB page.
+ *
+ * Each PRP element normally describes 4KB of physical memory, with exceptions
+ * for the first and last elements in the list.  If the memory being described
+ * by the list begins at a non-zero offset within the first 4KB page, then the
+ * first PRP element will contain a non-zero offset indicating where the region
+ * begins within the 4KB page.  The last memory segment may end before the end
+ * of the 4KB segment, depending upon the overall size of the memory being
+ * described by the PRP list.
+ *
+ * Since PRP entries lack any indication of size, the overall data buffer length
+ * is used to determine where the end of the data memory buffer is located, and
+ * how many PRP entries are required to describe it.
+ */
+static void
+_base_build_nvme_prp(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	Mpi26NVMeEncapsulatedRequest_t *nvme_encap_request,
+	dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma,
+	size_t data_in_sz)
+{
+	int		prp_size = NVME_PRP_SIZE;
+	__le64		*prp_entry, *prp1_entry, *prp2_entry;
+	__le64		*prp_page;
+	dma_addr_t	prp_entry_dma, prp_page_dma, dma_addr;
+	u32		offset, entry_len;
+	u32		page_mask_result, page_mask;
+	size_t		length;
+	struct mpt3sas_nvme_cmd *nvme_cmd =
+		(void *)nvme_encap_request->NVMe_Command;
+
+	/*
+	 * Not all commands require a data transfer. If no data, just return
+	 * without constructing any PRP.
+	 */
+	if (!data_in_sz && !data_out_sz)
+		return;
+	prp1_entry = &nvme_cmd->prp1;
+	prp2_entry = &nvme_cmd->prp2;
+	prp_entry = prp1_entry;
+	/*
+	 * For the PRP entries, use the specially allocated buffer of
+	 * contiguous memory.
+	 */
+	prp_page = (__le64 *)mpt3sas_base_get_pcie_sgl(ioc, smid);
+	prp_page_dma = mpt3sas_base_get_pcie_sgl_dma(ioc, smid);
+
+	/*
+	 * Check if we are within 1 entry of a page boundary we don't
+	 * want our first entry to be a PRP List entry.
+	 */
+	page_mask = ioc->page_size - 1;
+	page_mask_result = (uintptr_t)((u8 *)prp_page + prp_size) & page_mask;
+	if (!page_mask_result) {
+		/* Bump up to next page boundary. */
+		prp_page = (__le64 *)((u8 *)prp_page + prp_size);
+		prp_page_dma = prp_page_dma + prp_size;
+	}
+
+	/*
+	 * Set PRP physical pointer, which initially points to the current PRP
+	 * DMA memory page.
+	 */
+	prp_entry_dma = prp_page_dma;
+
+	/* Get physical address and length of the data buffer. */
+	if (data_in_sz) {
+		dma_addr = data_in_dma;
+		length = data_in_sz;
+	} else {
+		dma_addr = data_out_dma;
+		length = data_out_sz;
+	}
+
+	/* Loop while the length is not zero. */
+	while (length) {
+		/*
+		 * Check if we need to put a list pointer here if we are at
+		 * page boundary - prp_size (8 bytes).
+		 */
+		page_mask_result = (prp_entry_dma + prp_size) & page_mask;
+		if (!page_mask_result) {
+			/*
+			 * This is the last entry in a PRP List, so we need to
+			 * put a PRP list pointer here.  What this does is:
+			 *   - bump the current memory pointer to the next
+			 *     address, which will be the next full page.
+			 *   - set the PRP Entry to point to that page.  This
+			 *     is now the PRP List pointer.
+			 *   - bump the PRP Entry pointer the start of the
+			 *     next page.  Since all of this PRP memory is
+			 *     contiguous, no need to get a new page - it's
+			 *     just the next address.
+			 */
+			prp_entry_dma++;
+			*prp_entry = cpu_to_le64(prp_entry_dma);
+			prp_entry++;
+		}
+
+		/* Need to handle if entry will be part of a page. */
+		offset = dma_addr & page_mask;
+		entry_len = ioc->page_size - offset;
+
+		if (prp_entry == prp1_entry) {
+			/*
+			 * Must fill in the first PRP pointer (PRP1) before
+			 * moving on.
+			 */
+			*prp1_entry = cpu_to_le64(dma_addr);
+
+			/*
+			 * Now point to the second PRP entry within the
+			 * command (PRP2).
+			 */
+			prp_entry = prp2_entry;
+		} else if (prp_entry == prp2_entry) {
+			/*
+			 * Should the PRP2 entry be a PRP List pointer or just
+			 * a regular PRP pointer?  If there is more than one
+			 * more page of data, must use a PRP List pointer.
+			 */
+			if (length > ioc->page_size) {
+				/*
+				 * PRP2 will contain a PRP List pointer because
+				 * more PRP's are needed with this command. The
+				 * list will start at the beginning of the
+				 * contiguous buffer.
+				 */
+				*prp2_entry = cpu_to_le64(prp_entry_dma);
+
+				/*
+				 * The next PRP Entry will be the start of the
+				 * first PRP List.
+				 */
+				prp_entry = prp_page;
+			} else {
+				/*
+				 * After this, the PRP Entries are complete.
+				 * This command uses 2 PRP's and no PRP list.
+				 */
+				*prp2_entry = cpu_to_le64(dma_addr);
+			}
+		} else {
+			/*
+			 * Put entry in list and bump the addresses.
+			 *
+			 * After PRP1 and PRP2 are filled in, this will fill in
+			 * all remaining PRP entries in a PRP List, one per
+			 * each time through the loop.
+			 */
+			*prp_entry = cpu_to_le64(dma_addr);
+			prp_entry++;
+			prp_entry_dma++;
+		}
+
+		/*
+		 * Bump the phys address of the command's data buffer by the
+		 * entry_len.
+		 */
+		dma_addr += entry_len;
+
+		/* Decrement length accounting for last partial page. */
+		if (entry_len > length)
+			length = 0;
+		else
+			length -= entry_len;
+	}
+}
+
+/**
+ * base_make_prp_nvme - Prepare PRPs (Physical Region Page) -
+ *			SGLs specific to NVMe drives only
+ *
+ * @ioc:		per adapter object
+ * @scmd:		SCSI command from the mid-layer
+ * @mpi_request:	mpi request
+ * @smid:		msg Index
+ * @sge_count:		scatter gather element count.
+ *
+ * Return:		true: PRPs are built
+ *			false: IEEE SGLs needs to be built
+ */
+static void
+base_make_prp_nvme(struct MPT3SAS_ADAPTER *ioc,
+		struct scsi_cmnd *scmd,
+		Mpi25SCSIIORequest_t *mpi_request,
+		u16 smid, int sge_count)
+{
+	int sge_len, num_prp_in_chain = 0;
+	Mpi25IeeeSgeChain64_t *main_chain_element, *ptr_first_sgl;
+	__le64 *curr_buff;
+	dma_addr_t msg_dma, sge_addr, offset;
+	u32 page_mask, page_mask_result;
+	struct scatterlist *sg_scmd;
+	u32 first_prp_len;
+	int data_len = scsi_bufflen(scmd);
+	u32 nvme_pg_size;
+
+	nvme_pg_size = max_t(u32, ioc->page_size, NVME_PRP_PAGE_SIZE);
+	/*
+	 * Nvme has a very convoluted prp format.  One prp is required
+	 * for each page or partial page. Driver need to split up OS sg_list
+	 * entries if it is longer than one page or cross a page
+	 * boundary.  Driver also have to insert a PRP list pointer entry as
+	 * the last entry in each physical page of the PRP list.
+	 *
+	 * NOTE: The first PRP "entry" is actually placed in the first
+	 * SGL entry in the main message as IEEE 64 format.  The 2nd
+	 * entry in the main message is the chain element, and the rest
+	 * of the PRP entries are built in the contiguous pcie buffer.
+	 */
+	page_mask = nvme_pg_size - 1;
+
+	/*
+	 * Native SGL is needed.
+	 * Put a chain element in main message frame that points to the first
+	 * chain buffer.
+	 *
+	 * NOTE:  The ChainOffset field must be 0 when using a chain pointer to
+	 *        a native SGL.
+	 */
+
+	/* Set main message chain element pointer */
+	main_chain_element = (pMpi25IeeeSgeChain64_t)&mpi_request->SGL;
+	/*
+	 * For NVMe the chain element needs to be the 2nd SG entry in the main
+	 * message.
+	 */
+	main_chain_element = (Mpi25IeeeSgeChain64_t *)
+		((u8 *)main_chain_element + sizeof(MPI25_IEEE_SGE_CHAIN64));
+
+	/*
+	 * For the PRP entries, use the specially allocated buffer of
+	 * contiguous memory.  Normal chain buffers can't be used
+	 * because each chain buffer would need to be the size of an OS
+	 * page (4k).
+	 */
+	curr_buff = mpt3sas_base_get_pcie_sgl(ioc, smid);
+	msg_dma = mpt3sas_base_get_pcie_sgl_dma(ioc, smid);
+
+	main_chain_element->Address = cpu_to_le64(msg_dma);
+	main_chain_element->NextChainOffset = 0;
+	main_chain_element->Flags = MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT |
+			MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR |
+			MPI26_IEEE_SGE_FLAGS_NSF_NVME_PRP;
+
+	/* Build first prp, sge need not to be page aligned*/
+	ptr_first_sgl = (pMpi25IeeeSgeChain64_t)&mpi_request->SGL;
+	sg_scmd = scsi_sglist(scmd);
+	sge_addr = sg_dma_address(sg_scmd);
+	sge_len = sg_dma_len(sg_scmd);
+
+	offset = sge_addr & page_mask;
+	first_prp_len = nvme_pg_size - offset;
+
+	ptr_first_sgl->Address = cpu_to_le64(sge_addr);
+	ptr_first_sgl->Length = cpu_to_le32(first_prp_len);
+
+	data_len -= first_prp_len;
+
+	if (sge_len > first_prp_len) {
+		sge_addr += first_prp_len;
+		sge_len -= first_prp_len;
+	} else if (data_len && (sge_len == first_prp_len)) {
+		sg_scmd = sg_next(sg_scmd);
+		sge_addr = sg_dma_address(sg_scmd);
+		sge_len = sg_dma_len(sg_scmd);
+	}
+
+	for (;;) {
+		offset = sge_addr & page_mask;
+
+		/* Put PRP pointer due to page boundary*/
+		page_mask_result = (uintptr_t)(curr_buff + 1) & page_mask;
+		if (unlikely(!page_mask_result)) {
+			scmd_printk(KERN_NOTICE,
+				scmd, "page boundary curr_buff: 0x%p\n",
+				curr_buff);
+			msg_dma += 8;
+			*curr_buff = cpu_to_le64(msg_dma);
+			curr_buff++;
+			num_prp_in_chain++;
+		}
+
+		*curr_buff = cpu_to_le64(sge_addr);
+		curr_buff++;
+		msg_dma += 8;
+		num_prp_in_chain++;
+
+		sge_addr += nvme_pg_size;
+		sge_len -= nvme_pg_size;
+		data_len -= nvme_pg_size;
+
+		if (data_len <= 0)
+			break;
+
+		if (sge_len > 0)
+			continue;
+
+		sg_scmd = sg_next(sg_scmd);
+		sge_addr = sg_dma_address(sg_scmd);
+		sge_len = sg_dma_len(sg_scmd);
+	}
+
+	main_chain_element->Length =
+		cpu_to_le32(num_prp_in_chain * sizeof(u64));
+	return;
+}
+
+static bool
+base_is_prp_possible(struct MPT3SAS_ADAPTER *ioc,
+	struct _pcie_device *pcie_device, struct scsi_cmnd *scmd, int sge_count)
+{
+	u32 data_length = 0;
+	bool build_prp = true;
+
+	data_length = scsi_bufflen(scmd);
+	if (pcie_device &&
+	    (mpt3sas_scsih_is_pcie_scsi_device(pcie_device->device_info))) {
+		build_prp = false;
+		return build_prp;
+	}
+
+	/* If Datalenth is <= 16K and number of SGE’s entries are <= 2
+	 * we built IEEE SGL
+	 */
+	if ((data_length <= NVME_PRP_PAGE_SIZE*4) && (sge_count <= 2))
+		build_prp = false;
+
+	return build_prp;
+}
+
+/**
+ * _base_check_pcie_native_sgl - This function is called for PCIe end devices to
+ * determine if the driver needs to build a native SGL.  If so, that native
+ * SGL is built in the special contiguous buffers allocated especially for
+ * PCIe SGL creation.  If the driver will not build a native SGL, return
+ * TRUE and a normal IEEE SGL will be built.  Currently this routine
+ * supports NVMe.
+ * @ioc: per adapter object
+ * @mpi_request: mf request pointer
+ * @smid: system request message index
+ * @scmd: scsi command
+ * @pcie_device: points to the PCIe device's info
+ *
+ * Return: 0 if native SGL was built, 1 if no SGL was built
+ */
+static int
+_base_check_pcie_native_sgl(struct MPT3SAS_ADAPTER *ioc,
+	Mpi25SCSIIORequest_t *mpi_request, u16 smid, struct scsi_cmnd *scmd,
+	struct _pcie_device *pcie_device)
+{
+	int sges_left;
+
+	/* Get the SG list pointer and info. */
+	sges_left = scsi_dma_map(scmd);
+	if (sges_left < 0)
+		return 1;
+
+	/* Check if we need to build a native SG list. */
+	if (!base_is_prp_possible(ioc, pcie_device,
+				scmd, sges_left)) {
+		/* We built a native SG list, just return. */
+		goto out;
+	}
+
+	/*
+	 * Build native NVMe PRP.
+	 */
+	base_make_prp_nvme(ioc, scmd, mpi_request,
+			smid, sges_left);
+
+	return 0;
+out:
+	scsi_dma_unmap(scmd);
+	return 1;
+}
+
+/**
+ * _base_add_sg_single_ieee - add sg element for IEEE format
+ * @paddr: virtual address for SGE
+ * @flags: SGE flags
+ * @chain_offset: number of 128 byte elements from start of segment
+ * @length: data transfer length
+ * @dma_addr: Physical address
+ */
+static void
+_base_add_sg_single_ieee(void *paddr, u8 flags, u8 chain_offset, u32 length,
+	dma_addr_t dma_addr)
+{
+	Mpi25IeeeSgeChain64_t *sgel = paddr;
+
+	sgel->Flags = flags;
+	sgel->NextChainOffset = chain_offset;
+	sgel->Length = cpu_to_le32(length);
+	sgel->Address = cpu_to_le64(dma_addr);
+}
+
+/**
+ * _base_build_zero_len_sge_ieee - build zero length sg entry for IEEE format
+ * @ioc: per adapter object
+ * @paddr: virtual address for SGE
+ *
+ * Create a zero length scatter gather entry to insure the IOCs hardware has
+ * something to use if the target device goes brain dead and tries
+ * to send data even when none is asked for.
+ */
+static void
+_base_build_zero_len_sge_ieee(struct MPT3SAS_ADAPTER *ioc, void *paddr)
+{
+	u8 sgl_flags = (MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
+		MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR |
+		MPI25_IEEE_SGE_FLAGS_END_OF_LIST);
+
+	_base_add_sg_single_ieee(paddr, sgl_flags, 0, 0, -1);
+}
+
+/**
+ * _base_build_sg_scmd - main sg creation routine
+ *		pcie_device is unused here!
+ * @ioc: per adapter object
+ * @scmd: scsi command
+ * @smid: system request message index
+ * @unused: unused pcie_device pointer
+ * Context: none.
+ *
+ * The main routine that builds scatter gather table from a given
+ * scsi request sent via the .queuecommand main handler.
+ *
+ * Return: 0 success, anything else error
+ */
+static int
+_base_build_sg_scmd(struct MPT3SAS_ADAPTER *ioc,
+	struct scsi_cmnd *scmd, u16 smid, struct _pcie_device *unused)
+{
+	Mpi2SCSIIORequest_t *mpi_request;
+	dma_addr_t chain_dma;
+	struct scatterlist *sg_scmd;
+	void *sg_local, *chain;
+	u32 chain_offset;
+	u32 chain_length;
+	u32 chain_flags;
+	int sges_left;
+	u32 sges_in_segment;
+	u32 sgl_flags;
+	u32 sgl_flags_last_element;
+	u32 sgl_flags_end_buffer;
+	struct chain_tracker *chain_req;
+
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+
+	/* init scatter gather flags */
+	sgl_flags = MPI2_SGE_FLAGS_SIMPLE_ELEMENT;
+	if (scmd->sc_data_direction == DMA_TO_DEVICE)
+		sgl_flags |= MPI2_SGE_FLAGS_HOST_TO_IOC;
+	sgl_flags_last_element = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT)
+	    << MPI2_SGE_FLAGS_SHIFT;
+	sgl_flags_end_buffer = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT |
+	    MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST)
+	    << MPI2_SGE_FLAGS_SHIFT;
+	sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+
+	sg_scmd = scsi_sglist(scmd);
+	sges_left = scsi_dma_map(scmd);
+	if (sges_left < 0)
+		return -ENOMEM;
+
+	sg_local = &mpi_request->SGL;
+	sges_in_segment = ioc->max_sges_in_main_message;
+	if (sges_left <= sges_in_segment)
+		goto fill_in_last_segment;
+
+	mpi_request->ChainOffset = (offsetof(Mpi2SCSIIORequest_t, SGL) +
+	    (sges_in_segment * ioc->sge_size))/4;
+
+	/* fill in main message segment when there is a chain following */
+	while (sges_in_segment) {
+		if (sges_in_segment == 1)
+			ioc->base_add_sg_single(sg_local,
+			    sgl_flags_last_element | sg_dma_len(sg_scmd),
+			    sg_dma_address(sg_scmd));
+		else
+			ioc->base_add_sg_single(sg_local, sgl_flags |
+			    sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+		sg_scmd = sg_next(sg_scmd);
+		sg_local += ioc->sge_size;
+		sges_left--;
+		sges_in_segment--;
+	}
+
+	/* initializing the chain flags and pointers */
+	chain_flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT << MPI2_SGE_FLAGS_SHIFT;
+	chain_req = _base_get_chain_buffer_tracker(ioc, scmd);
+	if (!chain_req)
+		return -1;
+	chain = chain_req->chain_buffer;
+	chain_dma = chain_req->chain_buffer_dma;
+	do {
+		sges_in_segment = (sges_left <=
+		    ioc->max_sges_in_chain_message) ? sges_left :
+		    ioc->max_sges_in_chain_message;
+		chain_offset = (sges_left == sges_in_segment) ?
+		    0 : (sges_in_segment * ioc->sge_size)/4;
+		chain_length = sges_in_segment * ioc->sge_size;
+		if (chain_offset) {
+			chain_offset = chain_offset <<
+			    MPI2_SGE_CHAIN_OFFSET_SHIFT;
+			chain_length += ioc->sge_size;
+		}
+		ioc->base_add_sg_single(sg_local, chain_flags | chain_offset |
+		    chain_length, chain_dma);
+		sg_local = chain;
+		if (!chain_offset)
+			goto fill_in_last_segment;
+
+		/* fill in chain segments */
+		while (sges_in_segment) {
+			if (sges_in_segment == 1)
+				ioc->base_add_sg_single(sg_local,
+				    sgl_flags_last_element |
+				    sg_dma_len(sg_scmd),
+				    sg_dma_address(sg_scmd));
+			else
+				ioc->base_add_sg_single(sg_local, sgl_flags |
+				    sg_dma_len(sg_scmd),
+				    sg_dma_address(sg_scmd));
+			sg_scmd = sg_next(sg_scmd);
+			sg_local += ioc->sge_size;
+			sges_left--;
+			sges_in_segment--;
+		}
+
+		chain_req = _base_get_chain_buffer_tracker(ioc, scmd);
+		if (!chain_req)
+			return -1;
+		chain = chain_req->chain_buffer;
+		chain_dma = chain_req->chain_buffer_dma;
+	} while (1);
+
+
+ fill_in_last_segment:
+
+	/* fill the last segment */
+	while (sges_left) {
+		if (sges_left == 1)
+			ioc->base_add_sg_single(sg_local, sgl_flags_end_buffer |
+			    sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+		else
+			ioc->base_add_sg_single(sg_local, sgl_flags |
+			    sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+		sg_scmd = sg_next(sg_scmd);
+		sg_local += ioc->sge_size;
+		sges_left--;
+	}
+
+	return 0;
+}
+
+/**
+ * _base_build_sg_scmd_ieee - main sg creation routine for IEEE format
+ * @ioc: per adapter object
+ * @scmd: scsi command
+ * @smid: system request message index
+ * @pcie_device: Pointer to pcie_device. If set, the pcie native sgl will be
+ * constructed on need.
+ * Context: none.
+ *
+ * The main routine that builds scatter gather table from a given
+ * scsi request sent via the .queuecommand main handler.
+ *
+ * Return: 0 success, anything else error
+ */
+static int
+_base_build_sg_scmd_ieee(struct MPT3SAS_ADAPTER *ioc,
+	struct scsi_cmnd *scmd, u16 smid, struct _pcie_device *pcie_device)
+{
+	Mpi25SCSIIORequest_t *mpi_request;
+	dma_addr_t chain_dma;
+	struct scatterlist *sg_scmd;
+	void *sg_local, *chain;
+	u32 chain_offset;
+	u32 chain_length;
+	int sges_left;
+	u32 sges_in_segment;
+	u8 simple_sgl_flags;
+	u8 simple_sgl_flags_last;
+	u8 chain_sgl_flags;
+	struct chain_tracker *chain_req;
+
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+
+	/* init scatter gather flags */
+	simple_sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
+	    MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
+	simple_sgl_flags_last = simple_sgl_flags |
+	    MPI25_IEEE_SGE_FLAGS_END_OF_LIST;
+	chain_sgl_flags = MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT |
+	    MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
+
+	/* Check if we need to build a native SG list. */
+	if ((pcie_device) && (_base_check_pcie_native_sgl(ioc, mpi_request,
+			smid, scmd, pcie_device) == 0)) {
+		/* We built a native SG list, just return. */
+		return 0;
+	}
+
+	sg_scmd = scsi_sglist(scmd);
+	sges_left = scsi_dma_map(scmd);
+	if (sges_left < 0)
+		return -ENOMEM;
+
+	sg_local = &mpi_request->SGL;
+	sges_in_segment = (ioc->request_sz -
+		   offsetof(Mpi25SCSIIORequest_t, SGL))/ioc->sge_size_ieee;
+	if (sges_left <= sges_in_segment)
+		goto fill_in_last_segment;
+
+	mpi_request->ChainOffset = (sges_in_segment - 1 /* chain element */) +
+	    (offsetof(Mpi25SCSIIORequest_t, SGL)/ioc->sge_size_ieee);
+
+	/* fill in main message segment when there is a chain following */
+	while (sges_in_segment > 1) {
+		_base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0,
+		    sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+		sg_scmd = sg_next(sg_scmd);
+		sg_local += ioc->sge_size_ieee;
+		sges_left--;
+		sges_in_segment--;
+	}
+
+	/* initializing the pointers */
+	chain_req = _base_get_chain_buffer_tracker(ioc, scmd);
+	if (!chain_req)
+		return -1;
+	chain = chain_req->chain_buffer;
+	chain_dma = chain_req->chain_buffer_dma;
+	do {
+		sges_in_segment = (sges_left <=
+		    ioc->max_sges_in_chain_message) ? sges_left :
+		    ioc->max_sges_in_chain_message;
+		chain_offset = (sges_left == sges_in_segment) ?
+		    0 : sges_in_segment;
+		chain_length = sges_in_segment * ioc->sge_size_ieee;
+		if (chain_offset)
+			chain_length += ioc->sge_size_ieee;
+		_base_add_sg_single_ieee(sg_local, chain_sgl_flags,
+		    chain_offset, chain_length, chain_dma);
+
+		sg_local = chain;
+		if (!chain_offset)
+			goto fill_in_last_segment;
+
+		/* fill in chain segments */
+		while (sges_in_segment) {
+			_base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0,
+			    sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+			sg_scmd = sg_next(sg_scmd);
+			sg_local += ioc->sge_size_ieee;
+			sges_left--;
+			sges_in_segment--;
+		}
+
+		chain_req = _base_get_chain_buffer_tracker(ioc, scmd);
+		if (!chain_req)
+			return -1;
+		chain = chain_req->chain_buffer;
+		chain_dma = chain_req->chain_buffer_dma;
+	} while (1);
+
+
+ fill_in_last_segment:
+
+	/* fill the last segment */
+	while (sges_left > 0) {
+		if (sges_left == 1)
+			_base_add_sg_single_ieee(sg_local,
+			    simple_sgl_flags_last, 0, sg_dma_len(sg_scmd),
+			    sg_dma_address(sg_scmd));
+		else
+			_base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0,
+			    sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+		sg_scmd = sg_next(sg_scmd);
+		sg_local += ioc->sge_size_ieee;
+		sges_left--;
+	}
+
+	return 0;
+}
+
+/**
+ * _base_build_sg_ieee - build generic sg for IEEE format
+ * @ioc: per adapter object
+ * @psge: virtual address for SGE
+ * @data_out_dma: physical address for WRITES
+ * @data_out_sz: data xfer size for WRITES
+ * @data_in_dma: physical address for READS
+ * @data_in_sz: data xfer size for READS
+ */
+static void
+_base_build_sg_ieee(struct MPT3SAS_ADAPTER *ioc, void *psge,
+	dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma,
+	size_t data_in_sz)
+{
+	u8 sgl_flags;
+
+	if (!data_out_sz && !data_in_sz) {
+		_base_build_zero_len_sge_ieee(ioc, psge);
+		return;
+	}
+
+	if (data_out_sz && data_in_sz) {
+		/* WRITE sgel first */
+		sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
+		    MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
+		_base_add_sg_single_ieee(psge, sgl_flags, 0, data_out_sz,
+		    data_out_dma);
+
+		/* incr sgel */
+		psge += ioc->sge_size_ieee;
+
+		/* READ sgel last */
+		sgl_flags |= MPI25_IEEE_SGE_FLAGS_END_OF_LIST;
+		_base_add_sg_single_ieee(psge, sgl_flags, 0, data_in_sz,
+		    data_in_dma);
+	} else if (data_out_sz) /* WRITE */ {
+		sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
+		    MPI25_IEEE_SGE_FLAGS_END_OF_LIST |
+		    MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
+		_base_add_sg_single_ieee(psge, sgl_flags, 0, data_out_sz,
+		    data_out_dma);
+	} else if (data_in_sz) /* READ */ {
+		sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT |
+		    MPI25_IEEE_SGE_FLAGS_END_OF_LIST |
+		    MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR;
+		_base_add_sg_single_ieee(psge, sgl_flags, 0, data_in_sz,
+		    data_in_dma);
+	}
+}
+
+#define convert_to_kb(x) ((x) << (PAGE_SHIFT - 10))
+
+/**
+ * _base_config_dma_addressing - set dma addressing
+ * @ioc: per adapter object
+ * @pdev: PCI device struct
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev)
+{
+	struct sysinfo s;
+	u64 coherent_dma_mask, dma_mask;
+
+	if (ioc->is_mcpu_endpoint || sizeof(dma_addr_t) == 4) {
+		ioc->dma_mask = 32;
+		coherent_dma_mask = dma_mask = DMA_BIT_MASK(32);
+	/* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */
+	} else if (ioc->hba_mpi_version_belonged > MPI2_VERSION) {
+		ioc->dma_mask = 63;
+		coherent_dma_mask = dma_mask = DMA_BIT_MASK(63);
+	} else {
+		ioc->dma_mask = 64;
+		coherent_dma_mask = dma_mask = DMA_BIT_MASK(64);
+	}
+
+	if (ioc->use_32bit_dma)
+		coherent_dma_mask = DMA_BIT_MASK(32);
+
+	if (dma_set_mask(&pdev->dev, dma_mask) ||
+	    dma_set_coherent_mask(&pdev->dev, coherent_dma_mask))
+		return -ENODEV;
+
+	if (ioc->dma_mask > 32) {
+		ioc->base_add_sg_single = &_base_add_sg_single_64;
+		ioc->sge_size = sizeof(Mpi2SGESimple64_t);
+	} else {
+		ioc->base_add_sg_single = &_base_add_sg_single_32;
+		ioc->sge_size = sizeof(Mpi2SGESimple32_t);
+	}
+
+	si_meminfo(&s);
+	ioc_info(ioc, "%d BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (%ld kB)\n",
+		ioc->dma_mask, convert_to_kb(s.totalram));
+
+	return 0;
+}
+
+/**
+ * _base_check_enable_msix - checks MSIX capabable.
+ * @ioc: per adapter object
+ *
+ * Check to see if card is capable of MSIX, and set number
+ * of available msix vectors
+ */
+static int
+_base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc)
+{
+	int base;
+	u16 message_control;
+
+	/* Check whether controller SAS2008 B0 controller,
+	 * if it is SAS2008 B0 controller use IO-APIC instead of MSIX
+	 */
+	if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 &&
+	    ioc->pdev->revision == SAS2_PCI_DEVICE_B0_REVISION) {
+		return -EINVAL;
+	}
+
+	base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX);
+	if (!base) {
+		dfailprintk(ioc, ioc_info(ioc, "msix not supported\n"));
+		return -EINVAL;
+	}
+
+	/* get msix vector count */
+	/* NUMA_IO not supported for older controllers */
+	if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2004 ||
+	    ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 ||
+	    ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_1 ||
+	    ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_2 ||
+	    ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_3 ||
+	    ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2116_1 ||
+	    ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2116_2)
+		ioc->msix_vector_count = 1;
+	else {
+		pci_read_config_word(ioc->pdev, base + 2, &message_control);
+		ioc->msix_vector_count = (message_control & 0x3FF) + 1;
+	}
+	dinitprintk(ioc, ioc_info(ioc, "msix is supported, vector_count(%d)\n",
+				  ioc->msix_vector_count));
+	return 0;
+}
+
+/**
+ * mpt3sas_base_free_irq - free irq
+ * @ioc: per adapter object
+ *
+ * Freeing respective reply_queue from the list.
+ */
+void
+mpt3sas_base_free_irq(struct MPT3SAS_ADAPTER *ioc)
+{
+	unsigned int irq;
+	struct adapter_reply_queue *reply_q, *next;
+
+	if (list_empty(&ioc->reply_queue_list))
+		return;
+
+	list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) {
+		list_del(&reply_q->list);
+		if (reply_q->is_iouring_poll_q) {
+			kfree(reply_q);
+			continue;
+		}
+
+		if (ioc->smp_affinity_enable) {
+			irq = pci_irq_vector(ioc->pdev, reply_q->msix_index);
+			irq_update_affinity_hint(irq, NULL);
+		}
+		free_irq(pci_irq_vector(ioc->pdev, reply_q->msix_index),
+			 reply_q);
+		kfree(reply_q);
+	}
+}
+
+/**
+ * _base_request_irq - request irq
+ * @ioc: per adapter object
+ * @index: msix index into vector table
+ *
+ * Inserting respective reply_queue into the list.
+ */
+static int
+_base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index)
+{
+	struct pci_dev *pdev = ioc->pdev;
+	struct adapter_reply_queue *reply_q;
+	int r, qid;
+
+	reply_q =  kzalloc(sizeof(struct adapter_reply_queue), GFP_KERNEL);
+	if (!reply_q) {
+		ioc_err(ioc, "unable to allocate memory %zu!\n",
+			sizeof(struct adapter_reply_queue));
+		return -ENOMEM;
+	}
+	reply_q->ioc = ioc;
+	reply_q->msix_index = index;
+
+	atomic_set(&reply_q->busy, 0);
+
+	if (index >= ioc->iopoll_q_start_index) {
+		qid = index - ioc->iopoll_q_start_index;
+		snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-mq-poll%d",
+		    ioc->driver_name, ioc->id, qid);
+		reply_q->is_iouring_poll_q = 1;
+		ioc->io_uring_poll_queues[qid].reply_q = reply_q;
+		goto out;
+	}
+
+
+	if (ioc->msix_enable)
+		snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d",
+		    ioc->driver_name, ioc->id, index);
+	else
+		snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d",
+		    ioc->driver_name, ioc->id);
+	r = request_irq(pci_irq_vector(pdev, index), _base_interrupt,
+			IRQF_SHARED, reply_q->name, reply_q);
+	if (r) {
+		pr_err("%s: unable to allocate interrupt %d!\n",
+		       reply_q->name, pci_irq_vector(pdev, index));
+		kfree(reply_q);
+		return -EBUSY;
+	}
+out:
+	INIT_LIST_HEAD(&reply_q->list);
+	list_add_tail(&reply_q->list, &ioc->reply_queue_list);
+	return 0;
+}
+
+/**
+ * _base_assign_reply_queues - assigning msix index for each cpu
+ * @ioc: per adapter object
+ *
+ * The enduser would need to set the affinity via /proc/irq/#/smp_affinity
+ */
+static void
+_base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc)
+{
+	unsigned int cpu, nr_cpus, nr_msix, index = 0, irq;
+	struct adapter_reply_queue *reply_q;
+	int iopoll_q_count = ioc->reply_queue_count -
+	    ioc->iopoll_q_start_index;
+	const struct cpumask *mask;
+
+	if (!_base_is_controller_msix_enabled(ioc))
+		return;
+
+	if (ioc->msix_load_balance)
+		return;
+
+	memset(ioc->cpu_msix_table, 0, ioc->cpu_msix_table_sz);
+
+	nr_cpus = num_online_cpus();
+	nr_msix = ioc->reply_queue_count = min(ioc->reply_queue_count,
+					       ioc->facts.MaxMSIxVectors);
+	if (!nr_msix)
+		return;
+
+	if (ioc->smp_affinity_enable) {
+
+		/*
+		 * set irq affinity to local numa node for those irqs
+		 * corresponding to high iops queues.
+		 */
+		if (ioc->high_iops_queues) {
+			mask = cpumask_of_node(dev_to_node(&ioc->pdev->dev));
+			for (index = 0; index < ioc->high_iops_queues;
+			    index++) {
+				irq = pci_irq_vector(ioc->pdev, index);
+				irq_set_affinity_and_hint(irq, mask);
+			}
+		}
+
+		list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+			const cpumask_t *mask;
+
+			if (reply_q->msix_index < ioc->high_iops_queues ||
+			    reply_q->msix_index >= ioc->iopoll_q_start_index)
+				continue;
+
+			mask = pci_irq_get_affinity(ioc->pdev,
+			    reply_q->msix_index);
+			if (!mask) {
+				ioc_warn(ioc, "no affinity for msi %x\n",
+					 reply_q->msix_index);
+				goto fall_back;
+			}
+
+			for_each_cpu_and(cpu, mask, cpu_online_mask) {
+				if (cpu >= ioc->cpu_msix_table_sz)
+					break;
+				ioc->cpu_msix_table[cpu] = reply_q->msix_index;
+			}
+		}
+		return;
+	}
+
+fall_back:
+	cpu = cpumask_first(cpu_online_mask);
+	nr_msix -= (ioc->high_iops_queues - iopoll_q_count);
+	index = 0;
+
+	list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+		unsigned int i, group = nr_cpus / nr_msix;
+
+		if (reply_q->msix_index < ioc->high_iops_queues ||
+		    reply_q->msix_index >= ioc->iopoll_q_start_index)
+			continue;
+
+		if (cpu >= nr_cpus)
+			break;
+
+		if (index < nr_cpus % nr_msix)
+			group++;
+
+		for (i = 0 ; i < group ; i++) {
+			ioc->cpu_msix_table[cpu] = reply_q->msix_index;
+			cpu = cpumask_next(cpu, cpu_online_mask);
+		}
+		index++;
+	}
+}
+
+/**
+ * _base_check_and_enable_high_iops_queues - enable high iops mode
+ * @ioc: per adapter object
+ * @hba_msix_vector_count: msix vectors supported by HBA
+ *
+ * Enable high iops queues only if
+ *  - HBA is a SEA/AERO controller and
+ *  - MSI-Xs vector supported by the HBA is 128 and
+ *  - total CPU count in the system >=16 and
+ *  - loaded driver with default max_msix_vectors module parameter and
+ *  - system booted in non kdump mode
+ *
+ * Return: nothing.
+ */
+static void
+_base_check_and_enable_high_iops_queues(struct MPT3SAS_ADAPTER *ioc,
+		int hba_msix_vector_count)
+{
+	u16 lnksta, speed;
+
+	/*
+	 * Disable high iops queues if io uring poll queues are enabled.
+	 */
+	if (perf_mode == MPT_PERF_MODE_IOPS ||
+	    perf_mode == MPT_PERF_MODE_LATENCY ||
+	    ioc->io_uring_poll_queues) {
+		ioc->high_iops_queues = 0;
+		return;
+	}
+
+	if (perf_mode == MPT_PERF_MODE_DEFAULT) {
+
+		pcie_capability_read_word(ioc->pdev, PCI_EXP_LNKSTA, &lnksta);
+		speed = lnksta & PCI_EXP_LNKSTA_CLS;
+
+		if (speed < 0x4) {
+			ioc->high_iops_queues = 0;
+			return;
+		}
+	}
+
+	if (!reset_devices && ioc->is_aero_ioc &&
+	    hba_msix_vector_count == MPT3SAS_GEN35_MAX_MSIX_QUEUES &&
+	    num_online_cpus() >= MPT3SAS_HIGH_IOPS_REPLY_QUEUES &&
+	    max_msix_vectors == -1)
+		ioc->high_iops_queues = MPT3SAS_HIGH_IOPS_REPLY_QUEUES;
+	else
+		ioc->high_iops_queues = 0;
+}
+
+/**
+ * mpt3sas_base_disable_msix - disables msix
+ * @ioc: per adapter object
+ *
+ */
+void
+mpt3sas_base_disable_msix(struct MPT3SAS_ADAPTER *ioc)
+{
+	if (!ioc->msix_enable)
+		return;
+	pci_free_irq_vectors(ioc->pdev);
+	ioc->msix_enable = 0;
+	kfree(ioc->io_uring_poll_queues);
+}
+
+/**
+ * _base_alloc_irq_vectors - allocate msix vectors
+ * @ioc: per adapter object
+ *
+ */
+static int
+_base_alloc_irq_vectors(struct MPT3SAS_ADAPTER *ioc)
+{
+	int i, irq_flags = PCI_IRQ_MSIX;
+	struct irq_affinity desc = { .pre_vectors = ioc->high_iops_queues };
+	struct irq_affinity *descp = &desc;
+	/*
+	 * Don't allocate msix vectors for poll_queues.
+	 * msix_vectors is always within a range of FW supported reply queue.
+	 */
+	int nr_msix_vectors = ioc->iopoll_q_start_index;
+
+
+	if (ioc->smp_affinity_enable)
+		irq_flags |= PCI_IRQ_AFFINITY | PCI_IRQ_ALL_TYPES;
+	else
+		descp = NULL;
+
+	ioc_info(ioc, " %d %d %d\n", ioc->high_iops_queues,
+	    ioc->reply_queue_count, nr_msix_vectors);
+
+	i = pci_alloc_irq_vectors_affinity(ioc->pdev,
+	    ioc->high_iops_queues,
+	    nr_msix_vectors, irq_flags, descp);
+
+	return i;
+}
+
+/**
+ * _base_enable_msix - enables msix, failback to io_apic
+ * @ioc: per adapter object
+ *
+ */
+static int
+_base_enable_msix(struct MPT3SAS_ADAPTER *ioc)
+{
+	int r;
+	int i, local_max_msix_vectors;
+	u8 try_msix = 0;
+	int iopoll_q_count = 0;
+
+	ioc->msix_load_balance = false;
+
+	if (msix_disable == -1 || msix_disable == 0)
+		try_msix = 1;
+
+	if (!try_msix)
+		goto try_ioapic;
+
+	if (_base_check_enable_msix(ioc) != 0)
+		goto try_ioapic;
+
+	ioc_info(ioc, "MSI-X vectors supported: %d\n", ioc->msix_vector_count);
+	pr_info("\t no of cores: %d, max_msix_vectors: %d\n",
+		ioc->cpu_count, max_msix_vectors);
+
+	ioc->reply_queue_count =
+		min_t(int, ioc->cpu_count, ioc->msix_vector_count);
+
+	if (!ioc->rdpq_array_enable && max_msix_vectors == -1)
+		local_max_msix_vectors = (reset_devices) ? 1 : 8;
+	else
+		local_max_msix_vectors = max_msix_vectors;
+
+	if (local_max_msix_vectors == 0)
+		goto try_ioapic;
+
+	/*
+	 * Enable msix_load_balance only if combined reply queue mode is
+	 * disabled on SAS3 & above generation HBA devices.
+	 */
+	if (!ioc->combined_reply_queue &&
+	    ioc->hba_mpi_version_belonged != MPI2_VERSION) {
+		ioc_info(ioc,
+		    "combined ReplyQueue is off, Enabling msix load balance\n");
+		ioc->msix_load_balance = true;
+	}
+
+	/*
+	 * smp affinity setting is not need when msix load balance
+	 * is enabled.
+	 */
+	if (ioc->msix_load_balance)
+		ioc->smp_affinity_enable = 0;
+
+	if (!ioc->smp_affinity_enable || ioc->reply_queue_count <= 1)
+		ioc->shost->host_tagset = 0;
+
+	/*
+	 * Enable io uring poll queues only if host_tagset is enabled.
+	 */
+	if (ioc->shost->host_tagset)
+		iopoll_q_count = poll_queues;
+
+	if (iopoll_q_count) {
+		ioc->io_uring_poll_queues = kcalloc(iopoll_q_count,
+		    sizeof(struct io_uring_poll_queue), GFP_KERNEL);
+		if (!ioc->io_uring_poll_queues)
+			iopoll_q_count = 0;
+	}
+
+	if (ioc->is_aero_ioc)
+		_base_check_and_enable_high_iops_queues(ioc,
+		    ioc->msix_vector_count);
+
+	/*
+	 * Add high iops queues count to reply queue count if high iops queues
+	 * are enabled.
+	 */
+	ioc->reply_queue_count = min_t(int,
+	    ioc->reply_queue_count + ioc->high_iops_queues,
+	    ioc->msix_vector_count);
+
+	/*
+	 * Adjust the reply queue count incase reply queue count
+	 * exceeds the user provided MSIx vectors count.
+	 */
+	if (local_max_msix_vectors > 0)
+		ioc->reply_queue_count = min_t(int, local_max_msix_vectors,
+		    ioc->reply_queue_count);
+	/*
+	 * Add io uring poll queues count to reply queues count
+	 * if io uring is enabled in driver.
+	 */
+	if (iopoll_q_count) {
+		if (ioc->reply_queue_count < (iopoll_q_count + MPT3_MIN_IRQS))
+			iopoll_q_count = 0;
+		ioc->reply_queue_count = min_t(int,
+		    ioc->reply_queue_count + iopoll_q_count,
+		    ioc->msix_vector_count);
+	}
+
+	/*
+	 * Starting index of io uring poll queues in reply queue list.
+	 */
+	ioc->iopoll_q_start_index =
+	    ioc->reply_queue_count - iopoll_q_count;
+
+	r = _base_alloc_irq_vectors(ioc);
+	if (r < 0) {
+		ioc_info(ioc, "pci_alloc_irq_vectors failed (r=%d) !!!\n", r);
+		goto try_ioapic;
+	}
+
+	/*
+	 * Adjust the reply queue count if the allocated
+	 * MSIx vectors is less then the requested number
+	 * of MSIx vectors.
+	 */
+	if (r < ioc->iopoll_q_start_index) {
+		ioc->reply_queue_count = r + iopoll_q_count;
+		ioc->iopoll_q_start_index =
+		    ioc->reply_queue_count - iopoll_q_count;
+	}
+
+	ioc->msix_enable = 1;
+	for (i = 0; i < ioc->reply_queue_count; i++) {
+		r = _base_request_irq(ioc, i);
+		if (r) {
+			mpt3sas_base_free_irq(ioc);
+			mpt3sas_base_disable_msix(ioc);
+			goto try_ioapic;
+		}
+	}
+
+	ioc_info(ioc, "High IOPs queues : %s\n",
+			ioc->high_iops_queues ? "enabled" : "disabled");
+
+	return 0;
+
+/* failback to io_apic interrupt routing */
+ try_ioapic:
+	ioc->high_iops_queues = 0;
+	ioc_info(ioc, "High IOPs queues : disabled\n");
+	ioc->reply_queue_count = 1;
+	ioc->iopoll_q_start_index = ioc->reply_queue_count - 0;
+	r = pci_alloc_irq_vectors(ioc->pdev, 1, 1, PCI_IRQ_LEGACY);
+	if (r < 0) {
+		dfailprintk(ioc,
+			    ioc_info(ioc, "pci_alloc_irq_vector(legacy) failed (r=%d) !!!\n",
+				     r));
+	} else
+		r = _base_request_irq(ioc, 0);
+
+	return r;
+}
+
+/**
+ * mpt3sas_base_unmap_resources - free controller resources
+ * @ioc: per adapter object
+ */
+static void
+mpt3sas_base_unmap_resources(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct pci_dev *pdev = ioc->pdev;
+
+	dexitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
+
+	mpt3sas_base_free_irq(ioc);
+	mpt3sas_base_disable_msix(ioc);
+
+	kfree(ioc->replyPostRegisterIndex);
+	ioc->replyPostRegisterIndex = NULL;
+
+
+	if (ioc->chip_phys) {
+		iounmap(ioc->chip);
+		ioc->chip_phys = 0;
+	}
+
+	if (pci_is_enabled(pdev)) {
+		pci_release_selected_regions(ioc->pdev, ioc->bars);
+		pci_disable_device(pdev);
+	}
+}
+
+static int
+_base_diag_reset(struct MPT3SAS_ADAPTER *ioc);
+
+/**
+ * mpt3sas_base_check_for_fault_and_issue_reset - check if IOC is in fault state
+ *     and if it is in fault state then issue diag reset.
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_check_for_fault_and_issue_reset(struct MPT3SAS_ADAPTER *ioc)
+{
+	u32 ioc_state;
+	int rc = -EFAULT;
+
+	dinitprintk(ioc, pr_info("%s\n", __func__));
+	if (ioc->pci_error_recovery)
+		return 0;
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+	dhsprintk(ioc, pr_info("%s: ioc_state(0x%08x)\n", __func__, ioc_state));
+
+	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
+		mpt3sas_print_fault_code(ioc, ioc_state &
+		    MPI2_DOORBELL_DATA_MASK);
+		mpt3sas_base_mask_interrupts(ioc);
+		rc = _base_diag_reset(ioc);
+	} else if ((ioc_state & MPI2_IOC_STATE_MASK) ==
+	    MPI2_IOC_STATE_COREDUMP) {
+		mpt3sas_print_coredump_info(ioc, ioc_state &
+		     MPI2_DOORBELL_DATA_MASK);
+		mpt3sas_base_wait_for_coredump_completion(ioc, __func__);
+		mpt3sas_base_mask_interrupts(ioc);
+		rc = _base_diag_reset(ioc);
+	}
+
+	return rc;
+}
+
+/**
+ * mpt3sas_base_map_resources - map in controller resources (io/irq/memap)
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct pci_dev *pdev = ioc->pdev;
+	u32 memap_sz;
+	u32 pio_sz;
+	int i, r = 0, rc;
+	u64 pio_chip = 0;
+	phys_addr_t chip_phys = 0;
+	struct adapter_reply_queue *reply_q;
+	int iopoll_q_count = 0;
+
+	dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
+
+	ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
+	if (pci_enable_device_mem(pdev)) {
+		ioc_warn(ioc, "pci_enable_device_mem: failed\n");
+		ioc->bars = 0;
+		return -ENODEV;
+	}
+
+
+	if (pci_request_selected_regions(pdev, ioc->bars,
+	    ioc->driver_name)) {
+		ioc_warn(ioc, "pci_request_selected_regions: failed\n");
+		ioc->bars = 0;
+		r = -ENODEV;
+		goto out_fail;
+	}
+
+	pci_set_master(pdev);
+
+
+	if (_base_config_dma_addressing(ioc, pdev) != 0) {
+		ioc_warn(ioc, "no suitable DMA mask for %s\n", pci_name(pdev));
+		r = -ENODEV;
+		goto out_fail;
+	}
+
+	for (i = 0, memap_sz = 0, pio_sz = 0; (i < DEVICE_COUNT_RESOURCE) &&
+	     (!memap_sz || !pio_sz); i++) {
+		if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
+			if (pio_sz)
+				continue;
+			pio_chip = (u64)pci_resource_start(pdev, i);
+			pio_sz = pci_resource_len(pdev, i);
+		} else if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) {
+			if (memap_sz)
+				continue;
+			ioc->chip_phys = pci_resource_start(pdev, i);
+			chip_phys = ioc->chip_phys;
+			memap_sz = pci_resource_len(pdev, i);
+			ioc->chip = ioremap(ioc->chip_phys, memap_sz);
+		}
+	}
+
+	if (ioc->chip == NULL) {
+		ioc_err(ioc,
+		    "unable to map adapter memory! or resource not found\n");
+		r = -EINVAL;
+		goto out_fail;
+	}
+
+	mpt3sas_base_mask_interrupts(ioc);
+
+	r = _base_get_ioc_facts(ioc);
+	if (r) {
+		rc = mpt3sas_base_check_for_fault_and_issue_reset(ioc);
+		if (rc || (_base_get_ioc_facts(ioc)))
+			goto out_fail;
+	}
+
+	if (!ioc->rdpq_array_enable_assigned) {
+		ioc->rdpq_array_enable = ioc->rdpq_array_capable;
+		ioc->rdpq_array_enable_assigned = 1;
+	}
+
+	r = _base_enable_msix(ioc);
+	if (r)
+		goto out_fail;
+
+	iopoll_q_count = ioc->reply_queue_count - ioc->iopoll_q_start_index;
+	for (i = 0; i < iopoll_q_count; i++) {
+		atomic_set(&ioc->io_uring_poll_queues[i].busy, 0);
+		atomic_set(&ioc->io_uring_poll_queues[i].pause, 0);
+	}
+
+	if (!ioc->is_driver_loading)
+		_base_init_irqpolls(ioc);
+	/* Use the Combined reply queue feature only for SAS3 C0 & higher
+	 * revision HBAs and also only when reply queue count is greater than 8
+	 */
+	if (ioc->combined_reply_queue) {
+		/* Determine the Supplemental Reply Post Host Index Registers
+		 * Addresse. Supplemental Reply Post Host Index Registers
+		 * starts at offset MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET and
+		 * each register is at offset bytes of
+		 * MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET from previous one.
+		 */
+		ioc->replyPostRegisterIndex = kcalloc(
+		     ioc->combined_reply_index_count,
+		     sizeof(resource_size_t *), GFP_KERNEL);
+		if (!ioc->replyPostRegisterIndex) {
+			ioc_err(ioc,
+			    "allocation for replyPostRegisterIndex failed!\n");
+			r = -ENOMEM;
+			goto out_fail;
+		}
+
+		for (i = 0; i < ioc->combined_reply_index_count; i++) {
+			ioc->replyPostRegisterIndex[i] =
+				(resource_size_t __iomem *)
+				((u8 __force *)&ioc->chip->Doorbell +
+				 MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET +
+				 (i * MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET));
+		}
+	}
+
+	if (ioc->is_warpdrive) {
+		ioc->reply_post_host_index[0] = (resource_size_t __iomem *)
+		    &ioc->chip->ReplyPostHostIndex;
+
+		for (i = 1; i < ioc->cpu_msix_table_sz; i++)
+			ioc->reply_post_host_index[i] =
+			(resource_size_t __iomem *)
+			((u8 __iomem *)&ioc->chip->Doorbell + (0x4000 + ((i - 1)
+			* 4)));
+	}
+
+	list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+		if (reply_q->msix_index >= ioc->iopoll_q_start_index) {
+			pr_info("%s: enabled: index: %d\n",
+			    reply_q->name, reply_q->msix_index);
+			continue;
+		}
+
+		pr_info("%s: %s enabled: IRQ %d\n",
+			reply_q->name,
+			ioc->msix_enable ? "PCI-MSI-X" : "IO-APIC",
+			pci_irq_vector(ioc->pdev, reply_q->msix_index));
+	}
+
+	ioc_info(ioc, "iomem(%pap), mapped(0x%p), size(%d)\n",
+		 &chip_phys, ioc->chip, memap_sz);
+	ioc_info(ioc, "ioport(0x%016llx), size(%d)\n",
+		 (unsigned long long)pio_chip, pio_sz);
+
+	/* Save PCI configuration state for recovery from PCI AER/EEH errors */
+	pci_save_state(pdev);
+	return 0;
+
+ out_fail:
+	mpt3sas_base_unmap_resources(ioc);
+	return r;
+}
+
+/**
+ * mpt3sas_base_get_msg_frame - obtain request mf pointer
+ * @ioc: per adapter object
+ * @smid: system request message index(smid zero is invalid)
+ *
+ * Return: virt pointer to message frame.
+ */
+void *
+mpt3sas_base_get_msg_frame(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	return (void *)(ioc->request + (smid * ioc->request_sz));
+}
+
+/**
+ * mpt3sas_base_get_sense_buffer - obtain a sense buffer virt addr
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return: virt pointer to sense buffer.
+ */
+void *
+mpt3sas_base_get_sense_buffer(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	return (void *)(ioc->sense + ((smid - 1) * SCSI_SENSE_BUFFERSIZE));
+}
+
+/**
+ * mpt3sas_base_get_sense_buffer_dma - obtain a sense buffer dma addr
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return: phys pointer to the low 32bit address of the sense buffer.
+ */
+__le32
+mpt3sas_base_get_sense_buffer_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	return cpu_to_le32(ioc->sense_dma + ((smid - 1) *
+	    SCSI_SENSE_BUFFERSIZE));
+}
+
+/**
+ * mpt3sas_base_get_pcie_sgl - obtain a PCIe SGL virt addr
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return: virt pointer to a PCIe SGL.
+ */
+void *
+mpt3sas_base_get_pcie_sgl(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	return (void *)(ioc->pcie_sg_lookup[smid - 1].pcie_sgl);
+}
+
+/**
+ * mpt3sas_base_get_pcie_sgl_dma - obtain a PCIe SGL dma addr
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return: phys pointer to the address of the PCIe buffer.
+ */
+dma_addr_t
+mpt3sas_base_get_pcie_sgl_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	return ioc->pcie_sg_lookup[smid - 1].pcie_sgl_dma;
+}
+
+/**
+ * mpt3sas_base_get_reply_virt_addr - obtain reply frames virt address
+ * @ioc: per adapter object
+ * @phys_addr: lower 32 physical addr of the reply
+ *
+ * Converts 32bit lower physical addr into a virt address.
+ */
+void *
+mpt3sas_base_get_reply_virt_addr(struct MPT3SAS_ADAPTER *ioc, u32 phys_addr)
+{
+	if (!phys_addr)
+		return NULL;
+	return ioc->reply + (phys_addr - (u32)ioc->reply_dma);
+}
+
+/**
+ * _base_get_msix_index - get the msix index
+ * @ioc: per adapter object
+ * @scmd: scsi_cmnd object
+ *
+ * Return: msix index of general reply queues,
+ * i.e. reply queue on which IO request's reply
+ * should be posted by the HBA firmware.
+ */
+static inline u8
+_base_get_msix_index(struct MPT3SAS_ADAPTER *ioc,
+	struct scsi_cmnd *scmd)
+{
+	/* Enables reply_queue load balancing */
+	if (ioc->msix_load_balance)
+		return ioc->reply_queue_count ?
+		    base_mod64(atomic64_add_return(1,
+		    &ioc->total_io_cnt), ioc->reply_queue_count) : 0;
+
+	if (scmd && ioc->shost->nr_hw_queues > 1) {
+		u32 tag = blk_mq_unique_tag(scsi_cmd_to_rq(scmd));
+
+		return blk_mq_unique_tag_to_hwq(tag) +
+			ioc->high_iops_queues;
+	}
+
+	return ioc->cpu_msix_table[raw_smp_processor_id()];
+}
+
+/**
+ * _base_get_high_iops_msix_index - get the msix index of
+ *				high iops queues
+ * @ioc: per adapter object
+ * @scmd: scsi_cmnd object
+ *
+ * Return: msix index of high iops reply queues.
+ * i.e. high iops reply queue on which IO request's
+ * reply should be posted by the HBA firmware.
+ */
+static inline u8
+_base_get_high_iops_msix_index(struct MPT3SAS_ADAPTER *ioc,
+	struct scsi_cmnd *scmd)
+{
+	/**
+	 * Round robin the IO interrupts among the high iops
+	 * reply queues in terms of batch count 16 when outstanding
+	 * IOs on the target device is >=8.
+	 */
+
+	if (scsi_device_busy(scmd->device) > MPT3SAS_DEVICE_HIGH_IOPS_DEPTH)
+		return base_mod64((
+		    atomic64_add_return(1, &ioc->high_iops_outstanding) /
+		    MPT3SAS_HIGH_IOPS_BATCH_COUNT),
+		    MPT3SAS_HIGH_IOPS_REPLY_QUEUES);
+
+	return _base_get_msix_index(ioc, scmd);
+}
+
+/**
+ * mpt3sas_base_get_smid - obtain a free smid from internal queue
+ * @ioc: per adapter object
+ * @cb_idx: callback index
+ *
+ * Return: smid (zero is invalid)
+ */
+u16
+mpt3sas_base_get_smid(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx)
+{
+	unsigned long flags;
+	struct request_tracker *request;
+	u16 smid;
+
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	if (list_empty(&ioc->internal_free_list)) {
+		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+		ioc_err(ioc, "%s: smid not available\n", __func__);
+		return 0;
+	}
+
+	request = list_entry(ioc->internal_free_list.next,
+	    struct request_tracker, tracker_list);
+	request->cb_idx = cb_idx;
+	smid = request->smid;
+	list_del(&request->tracker_list);
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+	return smid;
+}
+
+/**
+ * mpt3sas_base_get_smid_scsiio - obtain a free smid from scsiio queue
+ * @ioc: per adapter object
+ * @cb_idx: callback index
+ * @scmd: pointer to scsi command object
+ *
+ * Return: smid (zero is invalid)
+ */
+u16
+mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx,
+	struct scsi_cmnd *scmd)
+{
+	struct scsiio_tracker *request = scsi_cmd_priv(scmd);
+	u16 smid;
+	u32 tag, unique_tag;
+
+	unique_tag = blk_mq_unique_tag(scsi_cmd_to_rq(scmd));
+	tag = blk_mq_unique_tag_to_tag(unique_tag);
+
+	/*
+	 * Store hw queue number corresponding to the tag.
+	 * This hw queue number is used later to determine
+	 * the unique_tag using the logic below. This unique_tag
+	 * is used to retrieve the scmd pointer corresponding
+	 * to tag using scsi_host_find_tag() API.
+	 *
+	 * tag = smid - 1;
+	 * unique_tag = ioc->io_queue_num[tag] << BLK_MQ_UNIQUE_TAG_BITS | tag;
+	 */
+	ioc->io_queue_num[tag] = blk_mq_unique_tag_to_hwq(unique_tag);
+
+	smid = tag + 1;
+	request->cb_idx = cb_idx;
+	request->smid = smid;
+	request->scmd = scmd;
+	INIT_LIST_HEAD(&request->chain_list);
+	return smid;
+}
+
+/**
+ * mpt3sas_base_get_smid_hpr - obtain a free smid from hi-priority queue
+ * @ioc: per adapter object
+ * @cb_idx: callback index
+ *
+ * Return: smid (zero is invalid)
+ */
+u16
+mpt3sas_base_get_smid_hpr(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx)
+{
+	unsigned long flags;
+	struct request_tracker *request;
+	u16 smid;
+
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	if (list_empty(&ioc->hpr_free_list)) {
+		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+		return 0;
+	}
+
+	request = list_entry(ioc->hpr_free_list.next,
+	    struct request_tracker, tracker_list);
+	request->cb_idx = cb_idx;
+	smid = request->smid;
+	list_del(&request->tracker_list);
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+	return smid;
+}
+
+static void
+_base_recovery_check(struct MPT3SAS_ADAPTER *ioc)
+{
+	/*
+	 * See _wait_for_commands_to_complete() call with regards to this code.
+	 */
+	if (ioc->shost_recovery && ioc->pending_io_count) {
+		ioc->pending_io_count = scsi_host_busy(ioc->shost);
+		if (ioc->pending_io_count == 0)
+			wake_up(&ioc->reset_wq);
+	}
+}
+
+void mpt3sas_base_clear_st(struct MPT3SAS_ADAPTER *ioc,
+			   struct scsiio_tracker *st)
+{
+	if (WARN_ON(st->smid == 0))
+		return;
+	st->cb_idx = 0xFF;
+	st->direct_io = 0;
+	st->scmd = NULL;
+	atomic_set(&ioc->chain_lookup[st->smid - 1].chain_offset, 0);
+	st->smid = 0;
+}
+
+/**
+ * mpt3sas_base_free_smid - put smid back on free_list
+ * @ioc: per adapter object
+ * @smid: system request message index
+ */
+void
+mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	unsigned long flags;
+	int i;
+
+	if (smid < ioc->hi_priority_smid) {
+		struct scsiio_tracker *st;
+		void *request;
+
+		st = _get_st_from_smid(ioc, smid);
+		if (!st) {
+			_base_recovery_check(ioc);
+			return;
+		}
+
+		/* Clear MPI request frame */
+		request = mpt3sas_base_get_msg_frame(ioc, smid);
+		memset(request, 0, ioc->request_sz);
+
+		mpt3sas_base_clear_st(ioc, st);
+		_base_recovery_check(ioc);
+		ioc->io_queue_num[smid - 1] = 0;
+		return;
+	}
+
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	if (smid < ioc->internal_smid) {
+		/* hi-priority */
+		i = smid - ioc->hi_priority_smid;
+		ioc->hpr_lookup[i].cb_idx = 0xFF;
+		list_add(&ioc->hpr_lookup[i].tracker_list, &ioc->hpr_free_list);
+	} else if (smid <= ioc->hba_queue_depth) {
+		/* internal queue */
+		i = smid - ioc->internal_smid;
+		ioc->internal_lookup[i].cb_idx = 0xFF;
+		list_add(&ioc->internal_lookup[i].tracker_list,
+		    &ioc->internal_free_list);
+	}
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+}
+
+/**
+ * _base_mpi_ep_writeq - 32 bit write to MMIO
+ * @b: data payload
+ * @addr: address in MMIO space
+ * @writeq_lock: spin lock
+ *
+ * This special handling for MPI EP to take care of 32 bit
+ * environment where its not quarenteed to send the entire word
+ * in one transfer.
+ */
+static inline void
+_base_mpi_ep_writeq(__u64 b, volatile void __iomem *addr,
+					spinlock_t *writeq_lock)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(writeq_lock, flags);
+	__raw_writel((u32)(b), addr);
+	__raw_writel((u32)(b >> 32), (addr + 4));
+	spin_unlock_irqrestore(writeq_lock, flags);
+}
+
+/**
+ * _base_writeq - 64 bit write to MMIO
+ * @b: data payload
+ * @addr: address in MMIO space
+ * @writeq_lock: spin lock
+ *
+ * Glue for handling an atomic 64 bit word to MMIO. This special handling takes
+ * care of 32 bit environment where its not quarenteed to send the entire word
+ * in one transfer.
+ */
+#if defined(writeq) && defined(CONFIG_64BIT)
+static inline void
+_base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock)
+{
+	wmb();
+	__raw_writeq(b, addr);
+	barrier();
+}
+#else
+static inline void
+_base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock)
+{
+	_base_mpi_ep_writeq(b, addr, writeq_lock);
+}
+#endif
+
+/**
+ * _base_set_and_get_msix_index - get the msix index and assign to msix_io
+ *                                variable of scsi tracker
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return: msix index.
+ */
+static u8
+_base_set_and_get_msix_index(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	struct scsiio_tracker *st = NULL;
+
+	if (smid < ioc->hi_priority_smid)
+		st = _get_st_from_smid(ioc, smid);
+
+	if (st == NULL)
+		return  _base_get_msix_index(ioc, NULL);
+
+	st->msix_io = ioc->get_msix_index_for_smlio(ioc, st->scmd);
+	return st->msix_io;
+}
+
+/**
+ * _base_put_smid_mpi_ep_scsi_io - send SCSI_IO request to firmware
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @handle: device handle
+ */
+static void
+_base_put_smid_mpi_ep_scsi_io(struct MPT3SAS_ADAPTER *ioc,
+	u16 smid, u16 handle)
+{
+	Mpi2RequestDescriptorUnion_t descriptor;
+	u64 *request = (u64 *)&descriptor;
+	void *mpi_req_iomem;
+	__le32 *mfp = (__le32 *)mpt3sas_base_get_msg_frame(ioc, smid);
+
+	_clone_sg_entries(ioc, (void *) mfp, smid);
+	mpi_req_iomem = (void __force *)ioc->chip +
+			MPI_FRAME_START_OFFSET + (smid * ioc->request_sz);
+	_base_clone_mpi_to_sys_mem(mpi_req_iomem, (void *)mfp,
+					ioc->request_sz);
+	descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
+	descriptor.SCSIIO.MSIxIndex = _base_set_and_get_msix_index(ioc, smid);
+	descriptor.SCSIIO.SMID = cpu_to_le16(smid);
+	descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
+	descriptor.SCSIIO.LMID = 0;
+	_base_mpi_ep_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+	    &ioc->scsi_lookup_lock);
+}
+
+/**
+ * _base_put_smid_scsi_io - send SCSI_IO request to firmware
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @handle: device handle
+ */
+static void
+_base_put_smid_scsi_io(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 handle)
+{
+	Mpi2RequestDescriptorUnion_t descriptor;
+	u64 *request = (u64 *)&descriptor;
+
+
+	descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
+	descriptor.SCSIIO.MSIxIndex = _base_set_and_get_msix_index(ioc, smid);
+	descriptor.SCSIIO.SMID = cpu_to_le16(smid);
+	descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
+	descriptor.SCSIIO.LMID = 0;
+	_base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+	    &ioc->scsi_lookup_lock);
+}
+
+/**
+ * _base_put_smid_fast_path - send fast path request to firmware
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @handle: device handle
+ */
+static void
+_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u16 handle)
+{
+	Mpi2RequestDescriptorUnion_t descriptor;
+	u64 *request = (u64 *)&descriptor;
+
+	descriptor.SCSIIO.RequestFlags =
+	    MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO;
+	descriptor.SCSIIO.MSIxIndex = _base_set_and_get_msix_index(ioc, smid);
+	descriptor.SCSIIO.SMID = cpu_to_le16(smid);
+	descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
+	descriptor.SCSIIO.LMID = 0;
+	_base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+	    &ioc->scsi_lookup_lock);
+}
+
+/**
+ * _base_put_smid_hi_priority - send Task Management request to firmware
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_task: msix_task will be same as msix of IO in case of task abort else 0
+ */
+static void
+_base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u16 msix_task)
+{
+	Mpi2RequestDescriptorUnion_t descriptor;
+	void *mpi_req_iomem;
+	u64 *request;
+
+	if (ioc->is_mcpu_endpoint) {
+		__le32 *mfp = (__le32 *)mpt3sas_base_get_msg_frame(ioc, smid);
+
+		/* TBD 256 is offset within sys register. */
+		mpi_req_iomem = (void __force *)ioc->chip
+					+ MPI_FRAME_START_OFFSET
+					+ (smid * ioc->request_sz);
+		_base_clone_mpi_to_sys_mem(mpi_req_iomem, (void *)mfp,
+							ioc->request_sz);
+	}
+
+	request = (u64 *)&descriptor;
+
+	descriptor.HighPriority.RequestFlags =
+	    MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY;
+	descriptor.HighPriority.MSIxIndex =  msix_task;
+	descriptor.HighPriority.SMID = cpu_to_le16(smid);
+	descriptor.HighPriority.LMID = 0;
+	descriptor.HighPriority.Reserved1 = 0;
+	if (ioc->is_mcpu_endpoint)
+		_base_mpi_ep_writeq(*request,
+				&ioc->chip->RequestDescriptorPostLow,
+				&ioc->scsi_lookup_lock);
+	else
+		_base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+		    &ioc->scsi_lookup_lock);
+}
+
+/**
+ * mpt3sas_base_put_smid_nvme_encap - send NVMe encapsulated request to
+ *  firmware
+ * @ioc: per adapter object
+ * @smid: system request message index
+ */
+void
+mpt3sas_base_put_smid_nvme_encap(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	Mpi2RequestDescriptorUnion_t descriptor;
+	u64 *request = (u64 *)&descriptor;
+
+	descriptor.Default.RequestFlags =
+		MPI26_REQ_DESCRIPT_FLAGS_PCIE_ENCAPSULATED;
+	descriptor.Default.MSIxIndex =  _base_set_and_get_msix_index(ioc, smid);
+	descriptor.Default.SMID = cpu_to_le16(smid);
+	descriptor.Default.LMID = 0;
+	descriptor.Default.DescriptorTypeDependent = 0;
+	_base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+	    &ioc->scsi_lookup_lock);
+}
+
+/**
+ * _base_put_smid_default - Default, primarily used for config pages
+ * @ioc: per adapter object
+ * @smid: system request message index
+ */
+static void
+_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	Mpi2RequestDescriptorUnion_t descriptor;
+	void *mpi_req_iomem;
+	u64 *request;
+
+	if (ioc->is_mcpu_endpoint) {
+		__le32 *mfp = (__le32 *)mpt3sas_base_get_msg_frame(ioc, smid);
+
+		_clone_sg_entries(ioc, (void *) mfp, smid);
+		/* TBD 256 is offset within sys register */
+		mpi_req_iomem = (void __force *)ioc->chip +
+			MPI_FRAME_START_OFFSET + (smid * ioc->request_sz);
+		_base_clone_mpi_to_sys_mem(mpi_req_iomem, (void *)mfp,
+							ioc->request_sz);
+	}
+	request = (u64 *)&descriptor;
+	descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
+	descriptor.Default.MSIxIndex = _base_set_and_get_msix_index(ioc, smid);
+	descriptor.Default.SMID = cpu_to_le16(smid);
+	descriptor.Default.LMID = 0;
+	descriptor.Default.DescriptorTypeDependent = 0;
+	if (ioc->is_mcpu_endpoint)
+		_base_mpi_ep_writeq(*request,
+				&ioc->chip->RequestDescriptorPostLow,
+				&ioc->scsi_lookup_lock);
+	else
+		_base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+				&ioc->scsi_lookup_lock);
+}
+
+/**
+ * _base_put_smid_scsi_io_atomic - send SCSI_IO request to firmware using
+ *   Atomic Request Descriptor
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @handle: device handle, unused in this function, for function type match
+ *
+ * Return: nothing.
+ */
+static void
+_base_put_smid_scsi_io_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u16 handle)
+{
+	Mpi26AtomicRequestDescriptor_t descriptor;
+	u32 *request = (u32 *)&descriptor;
+
+	descriptor.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
+	descriptor.MSIxIndex = _base_set_and_get_msix_index(ioc, smid);
+	descriptor.SMID = cpu_to_le16(smid);
+
+	writel(cpu_to_le32(*request), &ioc->chip->AtomicRequestDescriptorPost);
+}
+
+/**
+ * _base_put_smid_fast_path_atomic - send fast path request to firmware
+ * using Atomic Request Descriptor
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @handle: device handle, unused in this function, for function type match
+ * Return: nothing
+ */
+static void
+_base_put_smid_fast_path_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u16 handle)
+{
+	Mpi26AtomicRequestDescriptor_t descriptor;
+	u32 *request = (u32 *)&descriptor;
+
+	descriptor.RequestFlags = MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO;
+	descriptor.MSIxIndex = _base_set_and_get_msix_index(ioc, smid);
+	descriptor.SMID = cpu_to_le16(smid);
+
+	writel(cpu_to_le32(*request), &ioc->chip->AtomicRequestDescriptorPost);
+}
+
+/**
+ * _base_put_smid_hi_priority_atomic - send Task Management request to
+ * firmware using Atomic Request Descriptor
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_task: msix_task will be same as msix of IO in case of task abort else 0
+ *
+ * Return: nothing.
+ */
+static void
+_base_put_smid_hi_priority_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u16 msix_task)
+{
+	Mpi26AtomicRequestDescriptor_t descriptor;
+	u32 *request = (u32 *)&descriptor;
+
+	descriptor.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY;
+	descriptor.MSIxIndex = msix_task;
+	descriptor.SMID = cpu_to_le16(smid);
+
+	writel(cpu_to_le32(*request), &ioc->chip->AtomicRequestDescriptorPost);
+}
+
+/**
+ * _base_put_smid_default_atomic - Default, primarily used for config pages
+ * use Atomic Request Descriptor
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return: nothing.
+ */
+static void
+_base_put_smid_default_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	Mpi26AtomicRequestDescriptor_t descriptor;
+	u32 *request = (u32 *)&descriptor;
+
+	descriptor.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
+	descriptor.MSIxIndex = _base_set_and_get_msix_index(ioc, smid);
+	descriptor.SMID = cpu_to_le16(smid);
+
+	writel(cpu_to_le32(*request), &ioc->chip->AtomicRequestDescriptorPost);
+}
+
+/**
+ * _base_display_OEMs_branding - Display branding string
+ * @ioc: per adapter object
+ */
+static void
+_base_display_OEMs_branding(struct MPT3SAS_ADAPTER *ioc)
+{
+	if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_INTEL)
+		return;
+
+	switch (ioc->pdev->subsystem_vendor) {
+	case PCI_VENDOR_ID_INTEL:
+		switch (ioc->pdev->device) {
+		case MPI2_MFGPAGE_DEVID_SAS2008:
+			switch (ioc->pdev->subsystem_device) {
+			case MPT2SAS_INTEL_RMS2LL080_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT2SAS_INTEL_RMS2LL080_BRANDING);
+				break;
+			case MPT2SAS_INTEL_RMS2LL040_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT2SAS_INTEL_RMS2LL040_BRANDING);
+				break;
+			case MPT2SAS_INTEL_SSD910_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT2SAS_INTEL_SSD910_BRANDING);
+				break;
+			default:
+				ioc_info(ioc, "Intel(R) Controller: Subsystem ID: 0x%X\n",
+					 ioc->pdev->subsystem_device);
+				break;
+			}
+			break;
+		case MPI2_MFGPAGE_DEVID_SAS2308_2:
+			switch (ioc->pdev->subsystem_device) {
+			case MPT2SAS_INTEL_RS25GB008_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT2SAS_INTEL_RS25GB008_BRANDING);
+				break;
+			case MPT2SAS_INTEL_RMS25JB080_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT2SAS_INTEL_RMS25JB080_BRANDING);
+				break;
+			case MPT2SAS_INTEL_RMS25JB040_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT2SAS_INTEL_RMS25JB040_BRANDING);
+				break;
+			case MPT2SAS_INTEL_RMS25KB080_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT2SAS_INTEL_RMS25KB080_BRANDING);
+				break;
+			case MPT2SAS_INTEL_RMS25KB040_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT2SAS_INTEL_RMS25KB040_BRANDING);
+				break;
+			case MPT2SAS_INTEL_RMS25LB040_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT2SAS_INTEL_RMS25LB040_BRANDING);
+				break;
+			case MPT2SAS_INTEL_RMS25LB080_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT2SAS_INTEL_RMS25LB080_BRANDING);
+				break;
+			default:
+				ioc_info(ioc, "Intel(R) Controller: Subsystem ID: 0x%X\n",
+					 ioc->pdev->subsystem_device);
+				break;
+			}
+			break;
+		case MPI25_MFGPAGE_DEVID_SAS3008:
+			switch (ioc->pdev->subsystem_device) {
+			case MPT3SAS_INTEL_RMS3JC080_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT3SAS_INTEL_RMS3JC080_BRANDING);
+				break;
+
+			case MPT3SAS_INTEL_RS3GC008_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT3SAS_INTEL_RS3GC008_BRANDING);
+				break;
+			case MPT3SAS_INTEL_RS3FC044_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT3SAS_INTEL_RS3FC044_BRANDING);
+				break;
+			case MPT3SAS_INTEL_RS3UC080_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT3SAS_INTEL_RS3UC080_BRANDING);
+				break;
+			default:
+				ioc_info(ioc, "Intel(R) Controller: Subsystem ID: 0x%X\n",
+					 ioc->pdev->subsystem_device);
+				break;
+			}
+			break;
+		default:
+			ioc_info(ioc, "Intel(R) Controller: Subsystem ID: 0x%X\n",
+				 ioc->pdev->subsystem_device);
+			break;
+		}
+		break;
+	case PCI_VENDOR_ID_DELL:
+		switch (ioc->pdev->device) {
+		case MPI2_MFGPAGE_DEVID_SAS2008:
+			switch (ioc->pdev->subsystem_device) {
+			case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING);
+				break;
+			case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING);
+				break;
+			case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING);
+				break;
+			case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING);
+				break;
+			case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING);
+				break;
+			case MPT2SAS_DELL_PERC_H200_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT2SAS_DELL_PERC_H200_BRANDING);
+				break;
+			case MPT2SAS_DELL_6GBPS_SAS_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT2SAS_DELL_6GBPS_SAS_BRANDING);
+				break;
+			default:
+				ioc_info(ioc, "Dell 6Gbps HBA: Subsystem ID: 0x%X\n",
+					 ioc->pdev->subsystem_device);
+				break;
+			}
+			break;
+		case MPI25_MFGPAGE_DEVID_SAS3008:
+			switch (ioc->pdev->subsystem_device) {
+			case MPT3SAS_DELL_12G_HBA_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT3SAS_DELL_12G_HBA_BRANDING);
+				break;
+			default:
+				ioc_info(ioc, "Dell 12Gbps HBA: Subsystem ID: 0x%X\n",
+					 ioc->pdev->subsystem_device);
+				break;
+			}
+			break;
+		default:
+			ioc_info(ioc, "Dell HBA: Subsystem ID: 0x%X\n",
+				 ioc->pdev->subsystem_device);
+			break;
+		}
+		break;
+	case PCI_VENDOR_ID_CISCO:
+		switch (ioc->pdev->device) {
+		case MPI25_MFGPAGE_DEVID_SAS3008:
+			switch (ioc->pdev->subsystem_device) {
+			case MPT3SAS_CISCO_12G_8E_HBA_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT3SAS_CISCO_12G_8E_HBA_BRANDING);
+				break;
+			case MPT3SAS_CISCO_12G_8I_HBA_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT3SAS_CISCO_12G_8I_HBA_BRANDING);
+				break;
+			case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING);
+				break;
+			default:
+				ioc_info(ioc, "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
+					 ioc->pdev->subsystem_device);
+				break;
+			}
+			break;
+		case MPI25_MFGPAGE_DEVID_SAS3108_1:
+			switch (ioc->pdev->subsystem_device) {
+			case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING);
+				break;
+			case MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_BRANDING);
+				break;
+			default:
+				ioc_info(ioc, "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
+					 ioc->pdev->subsystem_device);
+				break;
+			}
+			break;
+		default:
+			ioc_info(ioc, "Cisco SAS HBA: Subsystem ID: 0x%X\n",
+				 ioc->pdev->subsystem_device);
+			break;
+		}
+		break;
+	case MPT2SAS_HP_3PAR_SSVID:
+		switch (ioc->pdev->device) {
+		case MPI2_MFGPAGE_DEVID_SAS2004:
+			switch (ioc->pdev->subsystem_device) {
+			case MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING);
+				break;
+			default:
+				ioc_info(ioc, "HP 6Gbps SAS HBA: Subsystem ID: 0x%X\n",
+					 ioc->pdev->subsystem_device);
+				break;
+			}
+			break;
+		case MPI2_MFGPAGE_DEVID_SAS2308_2:
+			switch (ioc->pdev->subsystem_device) {
+			case MPT2SAS_HP_2_4_INTERNAL_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT2SAS_HP_2_4_INTERNAL_BRANDING);
+				break;
+			case MPT2SAS_HP_2_4_EXTERNAL_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT2SAS_HP_2_4_EXTERNAL_BRANDING);
+				break;
+			case MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING);
+				break;
+			case MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID:
+				ioc_info(ioc, "%s\n",
+					 MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING);
+				break;
+			default:
+				ioc_info(ioc, "HP 6Gbps SAS HBA: Subsystem ID: 0x%X\n",
+					 ioc->pdev->subsystem_device);
+				break;
+			}
+			break;
+		default:
+			ioc_info(ioc, "HP SAS HBA: Subsystem ID: 0x%X\n",
+				 ioc->pdev->subsystem_device);
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+/**
+ * _base_display_fwpkg_version - sends FWUpload request to pull FWPkg
+ *				version from FW Image Header.
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+	static int
+_base_display_fwpkg_version(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2FWImageHeader_t *fw_img_hdr;
+	Mpi26ComponentImageHeader_t *cmp_img_hdr;
+	Mpi25FWUploadRequest_t *mpi_request;
+	Mpi2FWUploadReply_t mpi_reply;
+	int r = 0, issue_diag_reset = 0;
+	u32  package_version = 0;
+	void *fwpkg_data = NULL;
+	dma_addr_t fwpkg_data_dma;
+	u16 smid, ioc_status;
+	size_t data_length;
+
+	dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
+
+	if (ioc->base_cmds.status & MPT3_CMD_PENDING) {
+		ioc_err(ioc, "%s: internal command already in use\n", __func__);
+		return -EAGAIN;
+	}
+
+	data_length = sizeof(Mpi2FWImageHeader_t);
+	fwpkg_data = dma_alloc_coherent(&ioc->pdev->dev, data_length,
+			&fwpkg_data_dma, GFP_KERNEL);
+	if (!fwpkg_data) {
+		ioc_err(ioc,
+		    "Memory allocation for fwpkg data failed at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return -ENOMEM;
+	}
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
+	if (!smid) {
+		ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
+		r = -EAGAIN;
+		goto out;
+	}
+
+	ioc->base_cmds.status = MPT3_CMD_PENDING;
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->base_cmds.smid = smid;
+	memset(mpi_request, 0, sizeof(Mpi25FWUploadRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_FW_UPLOAD;
+	mpi_request->ImageType = MPI2_FW_UPLOAD_ITYPE_FW_FLASH;
+	mpi_request->ImageSize = cpu_to_le32(data_length);
+	ioc->build_sg(ioc, &mpi_request->SGL, 0, 0, fwpkg_data_dma,
+			data_length);
+	init_completion(&ioc->base_cmds.done);
+	ioc->put_smid_default(ioc, smid);
+	/* Wait for 15 seconds */
+	wait_for_completion_timeout(&ioc->base_cmds.done,
+			FW_IMG_HDR_READ_TIMEOUT*HZ);
+	ioc_info(ioc, "%s: complete\n", __func__);
+	if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
+		ioc_err(ioc, "%s: timeout\n", __func__);
+		_debug_dump_mf(mpi_request,
+				sizeof(Mpi25FWUploadRequest_t)/4);
+		issue_diag_reset = 1;
+	} else {
+		memset(&mpi_reply, 0, sizeof(Mpi2FWUploadReply_t));
+		if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID) {
+			memcpy(&mpi_reply, ioc->base_cmds.reply,
+					sizeof(Mpi2FWUploadReply_t));
+			ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+						MPI2_IOCSTATUS_MASK;
+			if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+				fw_img_hdr = (Mpi2FWImageHeader_t *)fwpkg_data;
+				if (le32_to_cpu(fw_img_hdr->Signature) ==
+				    MPI26_IMAGE_HEADER_SIGNATURE0_MPI26) {
+					cmp_img_hdr =
+					    (Mpi26ComponentImageHeader_t *)
+					    (fwpkg_data);
+					package_version =
+					    le32_to_cpu(
+					    cmp_img_hdr->ApplicationSpecific);
+				} else
+					package_version =
+					    le32_to_cpu(
+					    fw_img_hdr->PackageVersion.Word);
+				if (package_version)
+					ioc_info(ioc,
+					"FW Package Ver(%02d.%02d.%02d.%02d)\n",
+					((package_version) & 0xFF000000) >> 24,
+					((package_version) & 0x00FF0000) >> 16,
+					((package_version) & 0x0000FF00) >> 8,
+					(package_version) & 0x000000FF);
+			} else {
+				_debug_dump_mf(&mpi_reply,
+						sizeof(Mpi2FWUploadReply_t)/4);
+			}
+		}
+	}
+	ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+out:
+	if (fwpkg_data)
+		dma_free_coherent(&ioc->pdev->dev, data_length, fwpkg_data,
+				fwpkg_data_dma);
+	if (issue_diag_reset) {
+		if (ioc->drv_internal_flags & MPT_DRV_INTERNAL_FIRST_PE_ISSUED)
+			return -EFAULT;
+		if (mpt3sas_base_check_for_fault_and_issue_reset(ioc))
+			return -EFAULT;
+		r = -EAGAIN;
+	}
+	return r;
+}
+
+/**
+ * _base_display_ioc_capabilities - Display IOC's capabilities.
+ * @ioc: per adapter object
+ */
+static void
+_base_display_ioc_capabilities(struct MPT3SAS_ADAPTER *ioc)
+{
+	int i = 0;
+	char desc[17] = {0};
+	u32 iounit_pg1_flags;
+
+	strncpy(desc, ioc->manu_pg0.ChipName, 16);
+	ioc_info(ioc, "%s: FWVersion(%02d.%02d.%02d.%02d), ChipRevision(0x%02x)\n",
+		 desc,
+		 (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
+		 (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
+		 (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
+		 ioc->facts.FWVersion.Word & 0x000000FF,
+		 ioc->pdev->revision);
+
+	_base_display_OEMs_branding(ioc);
+
+	if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES) {
+		pr_info("%sNVMe", i ? "," : "");
+		i++;
+	}
+
+	ioc_info(ioc, "Protocol=(");
+
+	if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR) {
+		pr_cont("Initiator");
+		i++;
+	}
+
+	if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET) {
+		pr_cont("%sTarget", i ? "," : "");
+		i++;
+	}
+
+	i = 0;
+	pr_cont("), Capabilities=(");
+
+	if (!ioc->hide_ir_msg) {
+		if (ioc->facts.IOCCapabilities &
+		    MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) {
+			pr_cont("Raid");
+			i++;
+		}
+	}
+
+	if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) {
+		pr_cont("%sTLR", i ? "," : "");
+		i++;
+	}
+
+	if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_MULTICAST) {
+		pr_cont("%sMulticast", i ? "," : "");
+		i++;
+	}
+
+	if (ioc->facts.IOCCapabilities &
+	    MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET) {
+		pr_cont("%sBIDI Target", i ? "," : "");
+		i++;
+	}
+
+	if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) {
+		pr_cont("%sEEDP", i ? "," : "");
+		i++;
+	}
+
+	if (ioc->facts.IOCCapabilities &
+	    MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) {
+		pr_cont("%sSnapshot Buffer", i ? "," : "");
+		i++;
+	}
+
+	if (ioc->facts.IOCCapabilities &
+	    MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) {
+		pr_cont("%sDiag Trace Buffer", i ? "," : "");
+		i++;
+	}
+
+	if (ioc->facts.IOCCapabilities &
+	    MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER) {
+		pr_cont("%sDiag Extended Buffer", i ? "," : "");
+		i++;
+	}
+
+	if (ioc->facts.IOCCapabilities &
+	    MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING) {
+		pr_cont("%sTask Set Full", i ? "," : "");
+		i++;
+	}
+
+	iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags);
+	if (!(iounit_pg1_flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE)) {
+		pr_cont("%sNCQ", i ? "," : "");
+		i++;
+	}
+
+	pr_cont(")\n");
+}
+
+/**
+ * mpt3sas_base_update_missing_delay - change the missing delay timers
+ * @ioc: per adapter object
+ * @device_missing_delay: amount of time till device is reported missing
+ * @io_missing_delay: interval IO is returned when there is a missing device
+ *
+ * Passed on the command line, this function will modify the device missing
+ * delay, as well as the io missing delay. This should be called at driver
+ * load time.
+ */
+void
+mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc,
+	u16 device_missing_delay, u8 io_missing_delay)
+{
+	u16 dmd, dmd_new, dmd_orignal;
+	u8 io_missing_delay_original;
+	u16 sz;
+	Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
+	Mpi2ConfigReply_t mpi_reply;
+	u8 num_phys = 0;
+	u16 ioc_status;
+
+	mpt3sas_config_get_number_hba_phys(ioc, &num_phys);
+	if (!num_phys)
+		return;
+
+	sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (num_phys *
+	    sizeof(Mpi2SasIOUnit1PhyData_t));
+	sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
+	if (!sas_iounit_pg1) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		goto out;
+	}
+	if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
+	    sas_iounit_pg1, sz))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		goto out;
+	}
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		goto out;
+	}
+
+	/* device missing delay */
+	dmd = sas_iounit_pg1->ReportDeviceMissingDelay;
+	if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
+		dmd = (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
+	else
+		dmd = dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
+	dmd_orignal = dmd;
+	if (device_missing_delay > 0x7F) {
+		dmd = (device_missing_delay > 0x7F0) ? 0x7F0 :
+		    device_missing_delay;
+		dmd = dmd / 16;
+		dmd |= MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16;
+	} else
+		dmd = device_missing_delay;
+	sas_iounit_pg1->ReportDeviceMissingDelay = dmd;
+
+	/* io missing delay */
+	io_missing_delay_original = sas_iounit_pg1->IODeviceMissingDelay;
+	sas_iounit_pg1->IODeviceMissingDelay = io_missing_delay;
+
+	if (!mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1,
+	    sz)) {
+		if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
+			dmd_new = (dmd &
+			    MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
+		else
+			dmd_new =
+		    dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
+		ioc_info(ioc, "device_missing_delay: old(%d), new(%d)\n",
+			 dmd_orignal, dmd_new);
+		ioc_info(ioc, "ioc_missing_delay: old(%d), new(%d)\n",
+			 io_missing_delay_original,
+			 io_missing_delay);
+		ioc->device_missing_delay = dmd_new;
+		ioc->io_missing_delay = io_missing_delay;
+	}
+
+out:
+	kfree(sas_iounit_pg1);
+}
+
+/**
+ * _base_update_ioc_page1_inlinewith_perf_mode - Update IOC Page1 fields
+ *    according to performance mode.
+ * @ioc : per adapter object
+ *
+ * Return: zero on success; otherwise return EAGAIN error code asking the
+ * caller to retry.
+ */
+static int
+_base_update_ioc_page1_inlinewith_perf_mode(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2IOCPage1_t ioc_pg1;
+	Mpi2ConfigReply_t mpi_reply;
+	int rc;
+
+	rc = mpt3sas_config_get_ioc_pg1(ioc, &mpi_reply, &ioc->ioc_pg1_copy);
+	if (rc)
+		return rc;
+	memcpy(&ioc_pg1, &ioc->ioc_pg1_copy, sizeof(Mpi2IOCPage1_t));
+
+	switch (perf_mode) {
+	case MPT_PERF_MODE_DEFAULT:
+	case MPT_PERF_MODE_BALANCED:
+		if (ioc->high_iops_queues) {
+			ioc_info(ioc,
+				"Enable interrupt coalescing only for first\t"
+				"%d reply queues\n",
+				MPT3SAS_HIGH_IOPS_REPLY_QUEUES);
+			/*
+			 * If 31st bit is zero then interrupt coalescing is
+			 * enabled for all reply descriptor post queues.
+			 * If 31st bit is set to one then user can
+			 * enable/disable interrupt coalescing on per reply
+			 * descriptor post queue group(8) basis. So to enable
+			 * interrupt coalescing only on first reply descriptor
+			 * post queue group 31st bit and zero th bit is enabled.
+			 */
+			ioc_pg1.ProductSpecific = cpu_to_le32(0x80000000 |
+			    ((1 << MPT3SAS_HIGH_IOPS_REPLY_QUEUES/8) - 1));
+			rc = mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, &ioc_pg1);
+			if (rc)
+				return rc;
+			ioc_info(ioc, "performance mode: balanced\n");
+			return 0;
+		}
+		fallthrough;
+	case MPT_PERF_MODE_LATENCY:
+		/*
+		 * Enable interrupt coalescing on all reply queues
+		 * with timeout value 0xA
+		 */
+		ioc_pg1.CoalescingTimeout = cpu_to_le32(0xa);
+		ioc_pg1.Flags |= cpu_to_le32(MPI2_IOCPAGE1_REPLY_COALESCING);
+		ioc_pg1.ProductSpecific = 0;
+		rc = mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, &ioc_pg1);
+		if (rc)
+			return rc;
+		ioc_info(ioc, "performance mode: latency\n");
+		break;
+	case MPT_PERF_MODE_IOPS:
+		/*
+		 * Enable interrupt coalescing on all reply queues.
+		 */
+		ioc_info(ioc,
+		    "performance mode: iops with coalescing timeout: 0x%x\n",
+		    le32_to_cpu(ioc_pg1.CoalescingTimeout));
+		ioc_pg1.Flags |= cpu_to_le32(MPI2_IOCPAGE1_REPLY_COALESCING);
+		ioc_pg1.ProductSpecific = 0;
+		rc = mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, &ioc_pg1);
+		if (rc)
+			return rc;
+		break;
+	}
+	return 0;
+}
+
+/**
+ * _base_get_event_diag_triggers - get event diag trigger values from
+ *				persistent pages
+ * @ioc : per adapter object
+ *
+ * Return: nothing.
+ */
+static int
+_base_get_event_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi26DriverTriggerPage2_t trigger_pg2;
+	struct SL_WH_EVENT_TRIGGER_T *event_tg;
+	MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY *mpi_event_tg;
+	Mpi2ConfigReply_t mpi_reply;
+	int r = 0, i = 0;
+	u16 count = 0;
+	u16 ioc_status;
+
+	r = mpt3sas_config_get_driver_trigger_pg2(ioc, &mpi_reply,
+	    &trigger_pg2);
+	if (r)
+		return r;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		dinitprintk(ioc,
+		    ioc_err(ioc,
+		    "%s: Failed to get trigger pg2, ioc_status(0x%04x)\n",
+		   __func__, ioc_status));
+		return 0;
+	}
+
+	if (le16_to_cpu(trigger_pg2.NumMPIEventTrigger)) {
+		count = le16_to_cpu(trigger_pg2.NumMPIEventTrigger);
+		count = min_t(u16, NUM_VALID_ENTRIES, count);
+		ioc->diag_trigger_event.ValidEntries = count;
+
+		event_tg = &ioc->diag_trigger_event.EventTriggerEntry[0];
+		mpi_event_tg = &trigger_pg2.MPIEventTriggers[0];
+		for (i = 0; i < count; i++) {
+			event_tg->EventValue = le16_to_cpu(
+			    mpi_event_tg->MPIEventCode);
+			event_tg->LogEntryQualifier = le16_to_cpu(
+			    mpi_event_tg->MPIEventCodeSpecific);
+			event_tg++;
+			mpi_event_tg++;
+		}
+	}
+	return 0;
+}
+
+/**
+ * _base_get_scsi_diag_triggers - get scsi diag trigger values from
+ *				persistent pages
+ * @ioc : per adapter object
+ *
+ * Return: 0 on success; otherwise return failure status.
+ */
+static int
+_base_get_scsi_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi26DriverTriggerPage3_t trigger_pg3;
+	struct SL_WH_SCSI_TRIGGER_T *scsi_tg;
+	MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY *mpi_scsi_tg;
+	Mpi2ConfigReply_t mpi_reply;
+	int r = 0, i = 0;
+	u16 count = 0;
+	u16 ioc_status;
+
+	r = mpt3sas_config_get_driver_trigger_pg3(ioc, &mpi_reply,
+	    &trigger_pg3);
+	if (r)
+		return r;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		dinitprintk(ioc,
+		    ioc_err(ioc,
+		    "%s: Failed to get trigger pg3, ioc_status(0x%04x)\n",
+		    __func__, ioc_status));
+		return 0;
+	}
+
+	if (le16_to_cpu(trigger_pg3.NumSCSISenseTrigger)) {
+		count = le16_to_cpu(trigger_pg3.NumSCSISenseTrigger);
+		count = min_t(u16, NUM_VALID_ENTRIES, count);
+		ioc->diag_trigger_scsi.ValidEntries = count;
+
+		scsi_tg = &ioc->diag_trigger_scsi.SCSITriggerEntry[0];
+		mpi_scsi_tg = &trigger_pg3.SCSISenseTriggers[0];
+		for (i = 0; i < count; i++) {
+			scsi_tg->ASCQ = mpi_scsi_tg->ASCQ;
+			scsi_tg->ASC = mpi_scsi_tg->ASC;
+			scsi_tg->SenseKey = mpi_scsi_tg->SenseKey;
+
+			scsi_tg++;
+			mpi_scsi_tg++;
+		}
+	}
+	return 0;
+}
+
+/**
+ * _base_get_mpi_diag_triggers - get mpi diag trigger values from
+ *				persistent pages
+ * @ioc : per adapter object
+ *
+ * Return: 0 on success; otherwise return failure status.
+ */
+static int
+_base_get_mpi_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi26DriverTriggerPage4_t trigger_pg4;
+	struct SL_WH_MPI_TRIGGER_T *status_tg;
+	MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY *mpi_status_tg;
+	Mpi2ConfigReply_t mpi_reply;
+	int r = 0, i = 0;
+	u16 count = 0;
+	u16 ioc_status;
+
+	r = mpt3sas_config_get_driver_trigger_pg4(ioc, &mpi_reply,
+	    &trigger_pg4);
+	if (r)
+		return r;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		dinitprintk(ioc,
+		    ioc_err(ioc,
+		    "%s: Failed to get trigger pg4, ioc_status(0x%04x)\n",
+		    __func__, ioc_status));
+		return 0;
+	}
+
+	if (le16_to_cpu(trigger_pg4.NumIOCStatusLogInfoTrigger)) {
+		count = le16_to_cpu(trigger_pg4.NumIOCStatusLogInfoTrigger);
+		count = min_t(u16, NUM_VALID_ENTRIES, count);
+		ioc->diag_trigger_mpi.ValidEntries = count;
+
+		status_tg = &ioc->diag_trigger_mpi.MPITriggerEntry[0];
+		mpi_status_tg = &trigger_pg4.IOCStatusLoginfoTriggers[0];
+
+		for (i = 0; i < count; i++) {
+			status_tg->IOCStatus = le16_to_cpu(
+			    mpi_status_tg->IOCStatus);
+			status_tg->IocLogInfo = le32_to_cpu(
+			    mpi_status_tg->LogInfo);
+
+			status_tg++;
+			mpi_status_tg++;
+		}
+	}
+	return 0;
+}
+
+/**
+ * _base_get_master_diag_triggers - get master diag trigger values from
+ *				persistent pages
+ * @ioc : per adapter object
+ *
+ * Return: nothing.
+ */
+static int
+_base_get_master_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi26DriverTriggerPage1_t trigger_pg1;
+	Mpi2ConfigReply_t mpi_reply;
+	int r;
+	u16 ioc_status;
+
+	r = mpt3sas_config_get_driver_trigger_pg1(ioc, &mpi_reply,
+	    &trigger_pg1);
+	if (r)
+		return r;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		dinitprintk(ioc,
+		    ioc_err(ioc,
+		    "%s: Failed to get trigger pg1, ioc_status(0x%04x)\n",
+		   __func__, ioc_status));
+		return 0;
+	}
+
+	if (le16_to_cpu(trigger_pg1.NumMasterTrigger))
+		ioc->diag_trigger_master.MasterData |=
+		    le32_to_cpu(
+		    trigger_pg1.MasterTriggers[0].MasterTriggerFlags);
+	return 0;
+}
+
+/**
+ * _base_check_for_trigger_pages_support - checks whether HBA FW supports
+ *					driver trigger pages or not
+ * @ioc : per adapter object
+ * @trigger_flags : address where trigger page0's TriggerFlags value is copied
+ *
+ * Return: trigger flags mask if HBA FW supports driver trigger pages;
+ * otherwise returns %-EFAULT if driver trigger pages are not supported by FW or
+ * return EAGAIN if diag reset occurred due to FW fault and asking the
+ * caller to retry the command.
+ *
+ */
+static int
+_base_check_for_trigger_pages_support(struct MPT3SAS_ADAPTER *ioc, u32 *trigger_flags)
+{
+	Mpi26DriverTriggerPage0_t trigger_pg0;
+	int r = 0;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 ioc_status;
+
+	r = mpt3sas_config_get_driver_trigger_pg0(ioc, &mpi_reply,
+	    &trigger_pg0);
+	if (r)
+		return r;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+		return -EFAULT;
+
+	*trigger_flags = le16_to_cpu(trigger_pg0.TriggerFlags);
+	return 0;
+}
+
+/**
+ * _base_get_diag_triggers - Retrieve diag trigger values from
+ *				persistent pages.
+ * @ioc : per adapter object
+ *
+ * Return: zero on success; otherwise return EAGAIN error codes
+ * asking the caller to retry.
+ */
+static int
+_base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
+{
+	int trigger_flags;
+	int r;
+
+	/*
+	 * Default setting of master trigger.
+	 */
+	ioc->diag_trigger_master.MasterData =
+	    (MASTER_TRIGGER_FW_FAULT + MASTER_TRIGGER_ADAPTER_RESET);
+
+	r = _base_check_for_trigger_pages_support(ioc, &trigger_flags);
+	if (r) {
+		if (r == -EAGAIN)
+			return r;
+		/*
+		 * Don't go for error handling when FW doesn't support
+		 * driver trigger pages.
+		 */
+		return 0;
+	}
+
+	ioc->supports_trigger_pages = 1;
+
+	/*
+	 * Retrieve master diag trigger values from driver trigger pg1
+	 * if master trigger bit enabled in TriggerFlags.
+	 */
+	if ((u16)trigger_flags &
+	    MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID) {
+		r = _base_get_master_diag_triggers(ioc);
+		if (r)
+			return r;
+	}
+
+	/*
+	 * Retrieve event diag trigger values from driver trigger pg2
+	 * if event trigger bit enabled in TriggerFlags.
+	 */
+	if ((u16)trigger_flags &
+	    MPI26_DRIVER_TRIGGER0_FLAG_MPI_EVENT_TRIGGER_VALID) {
+		r = _base_get_event_diag_triggers(ioc);
+		if (r)
+			return r;
+	}
+
+	/*
+	 * Retrieve scsi diag trigger values from driver trigger pg3
+	 * if scsi trigger bit enabled in TriggerFlags.
+	 */
+	if ((u16)trigger_flags &
+	    MPI26_DRIVER_TRIGGER0_FLAG_SCSI_SENSE_TRIGGER_VALID) {
+		r = _base_get_scsi_diag_triggers(ioc);
+		if (r)
+			return r;
+	}
+	/*
+	 * Retrieve mpi error diag trigger values from driver trigger pg4
+	 * if loginfo trigger bit enabled in TriggerFlags.
+	 */
+	if ((u16)trigger_flags &
+	    MPI26_DRIVER_TRIGGER0_FLAG_LOGINFO_TRIGGER_VALID) {
+		r = _base_get_mpi_diag_triggers(ioc);
+		if (r)
+			return r;
+	}
+	return 0;
+}
+
+/**
+ * _base_update_diag_trigger_pages - Update the driver trigger pages after
+ *			online FW update, in case updated FW supports driver
+ *			trigger pages.
+ * @ioc : per adapter object
+ *
+ * Return: nothing.
+ */
+static void
+_base_update_diag_trigger_pages(struct MPT3SAS_ADAPTER *ioc)
+{
+
+	if (ioc->diag_trigger_master.MasterData)
+		mpt3sas_config_update_driver_trigger_pg1(ioc,
+		    &ioc->diag_trigger_master, 1);
+
+	if (ioc->diag_trigger_event.ValidEntries)
+		mpt3sas_config_update_driver_trigger_pg2(ioc,
+		    &ioc->diag_trigger_event, 1);
+
+	if (ioc->diag_trigger_scsi.ValidEntries)
+		mpt3sas_config_update_driver_trigger_pg3(ioc,
+		    &ioc->diag_trigger_scsi, 1);
+
+	if (ioc->diag_trigger_mpi.ValidEntries)
+		mpt3sas_config_update_driver_trigger_pg4(ioc,
+		    &ioc->diag_trigger_mpi, 1);
+}
+
+/**
+ * _base_assign_fw_reported_qd	- Get FW reported QD for SAS/SATA devices.
+ *				- On failure set default QD values.
+ * @ioc : per adapter object
+ *
+ * Returns 0 for success, non-zero for failure.
+ *
+ */
+static int _base_assign_fw_reported_qd(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
+	Mpi26PCIeIOUnitPage1_t pcie_iounit_pg1;
+	u16 depth;
+	int sz;
+	int rc = 0;
+
+	ioc->max_wideport_qd = MPT3SAS_SAS_QUEUE_DEPTH;
+	ioc->max_narrowport_qd = MPT3SAS_SAS_QUEUE_DEPTH;
+	ioc->max_sata_qd = MPT3SAS_SATA_QUEUE_DEPTH;
+	ioc->max_nvme_qd = MPT3SAS_NVME_QUEUE_DEPTH;
+	if (!ioc->is_gen35_ioc)
+		goto out;
+	/* sas iounit page 1 */
+	sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData);
+	sas_iounit_pg1 = kzalloc(sizeof(Mpi2SasIOUnitPage1_t), GFP_KERNEL);
+	if (!sas_iounit_pg1) {
+		pr_err("%s: failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return rc;
+	}
+	rc = mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
+	    sas_iounit_pg1, sz);
+	if (rc) {
+		pr_err("%s: failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+
+	depth = le16_to_cpu(sas_iounit_pg1->SASWideMaxQueueDepth);
+	ioc->max_wideport_qd = (depth ? depth : MPT3SAS_SAS_QUEUE_DEPTH);
+
+	depth = le16_to_cpu(sas_iounit_pg1->SASNarrowMaxQueueDepth);
+	ioc->max_narrowport_qd = (depth ? depth : MPT3SAS_SAS_QUEUE_DEPTH);
+
+	depth = sas_iounit_pg1->SATAMaxQDepth;
+	ioc->max_sata_qd = (depth ? depth : MPT3SAS_SATA_QUEUE_DEPTH);
+
+	/* pcie iounit page 1 */
+	rc = mpt3sas_config_get_pcie_iounit_pg1(ioc, &mpi_reply,
+	    &pcie_iounit_pg1, sizeof(Mpi26PCIeIOUnitPage1_t));
+	if (rc) {
+		pr_err("%s: failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+	ioc->max_nvme_qd = (le16_to_cpu(pcie_iounit_pg1.NVMeMaxQueueDepth)) ?
+	    (le16_to_cpu(pcie_iounit_pg1.NVMeMaxQueueDepth)) :
+	    MPT3SAS_NVME_QUEUE_DEPTH;
+out:
+	dinitprintk(ioc, pr_err(
+	    "MaxWidePortQD: 0x%x MaxNarrowPortQD: 0x%x MaxSataQD: 0x%x MaxNvmeQD: 0x%x\n",
+	    ioc->max_wideport_qd, ioc->max_narrowport_qd,
+	    ioc->max_sata_qd, ioc->max_nvme_qd));
+	kfree(sas_iounit_pg1);
+	return rc;
+}
+
+/**
+ * mpt3sas_atto_validate_nvram - validate the ATTO nvram read from mfg pg1
+ *
+ * @ioc : per adapter object
+ * @n   : ptr to the ATTO nvram structure
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+mpt3sas_atto_validate_nvram(struct MPT3SAS_ADAPTER *ioc,
+			    struct ATTO_SAS_NVRAM *n)
+{
+	int r = -EINVAL;
+	union ATTO_SAS_ADDRESS *s1;
+	u32 len;
+	u8 *pb;
+	u8 ckSum;
+
+	/* validate nvram checksum */
+	pb = (u8 *) n;
+	ckSum = ATTO_SASNVR_CKSUM_SEED;
+	len = sizeof(struct ATTO_SAS_NVRAM);
+
+	while (len--)
+		ckSum = ckSum + pb[len];
+
+	if (ckSum) {
+		ioc_err(ioc, "Invalid ATTO NVRAM checksum\n");
+		return r;
+	}
+
+	s1 = (union ATTO_SAS_ADDRESS *) n->SasAddr;
+
+	if (n->Signature[0] != 'E'
+	|| n->Signature[1] != 'S'
+	|| n->Signature[2] != 'A'
+	|| n->Signature[3] != 'S')
+		ioc_err(ioc, "Invalid ATTO NVRAM signature\n");
+	else if (n->Version > ATTO_SASNVR_VERSION)
+		ioc_info(ioc, "Invalid ATTO NVRAM version");
+	else if ((n->SasAddr[7] & (ATTO_SAS_ADDR_ALIGN - 1))
+			|| s1->b[0] != 0x50
+			|| s1->b[1] != 0x01
+			|| s1->b[2] != 0x08
+			|| (s1->b[3] & 0xF0) != 0x60
+			|| ((s1->b[3] & 0x0F) | le32_to_cpu(s1->d[1])) == 0) {
+		ioc_err(ioc, "Invalid ATTO SAS address\n");
+	} else
+		r = 0;
+	return r;
+}
+
+/**
+ * mpt3sas_atto_get_sas_addr - get the ATTO SAS address from mfg page 1
+ *
+ * @ioc : per adapter object
+ * @*sas_addr : return sas address
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+mpt3sas_atto_get_sas_addr(struct MPT3SAS_ADAPTER *ioc, union ATTO_SAS_ADDRESS *sas_addr)
+{
+	Mpi2ManufacturingPage1_t mfg_pg1;
+	Mpi2ConfigReply_t mpi_reply;
+	struct ATTO_SAS_NVRAM *nvram;
+	int r;
+	__be64 addr;
+
+	r = mpt3sas_config_get_manufacturing_pg1(ioc, &mpi_reply, &mfg_pg1);
+	if (r) {
+		ioc_err(ioc, "Failed to read manufacturing page 1\n");
+		return r;
+	}
+
+	/* validate nvram */
+	nvram = (struct ATTO_SAS_NVRAM *) mfg_pg1.VPD;
+	r = mpt3sas_atto_validate_nvram(ioc, nvram);
+	if (r)
+		return r;
+
+	addr = *((__be64 *) nvram->SasAddr);
+	sas_addr->q = cpu_to_le64(be64_to_cpu(addr));
+	return r;
+}
+
+/**
+ * mpt3sas_atto_init - perform initializaion for ATTO branded
+ *					adapter.
+ * @ioc : per adapter object
+ *5
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+mpt3sas_atto_init(struct MPT3SAS_ADAPTER *ioc)
+{
+	int sz = 0;
+	Mpi2BiosPage4_t *bios_pg4 = NULL;
+	Mpi2ConfigReply_t mpi_reply;
+	int r;
+	int ix;
+	union ATTO_SAS_ADDRESS sas_addr;
+	union ATTO_SAS_ADDRESS temp;
+	union ATTO_SAS_ADDRESS bias;
+
+	r = mpt3sas_atto_get_sas_addr(ioc, &sas_addr);
+	if (r)
+		return r;
+
+	/* get header first to get size */
+	r = mpt3sas_config_get_bios_pg4(ioc, &mpi_reply, NULL, 0);
+	if (r) {
+		ioc_err(ioc, "Failed to read ATTO bios page 4 header.\n");
+		return r;
+	}
+
+	sz = mpi_reply.Header.PageLength * sizeof(u32);
+	bios_pg4 = kzalloc(sz, GFP_KERNEL);
+	if (!bios_pg4) {
+		ioc_err(ioc, "Failed to allocate memory for ATTO bios page.\n");
+		return -ENOMEM;
+	}
+
+	/* read bios page 4 */
+	r = mpt3sas_config_get_bios_pg4(ioc, &mpi_reply, bios_pg4, sz);
+	if (r) {
+		ioc_err(ioc, "Failed to read ATTO bios page 4\n");
+		goto out;
+	}
+
+	/* Update bios page 4 with the ATTO WWID */
+	bias.q = sas_addr.q;
+	bias.b[7] += ATTO_SAS_ADDR_DEVNAME_BIAS;
+
+	for (ix = 0; ix < bios_pg4->NumPhys; ix++) {
+		temp.q = sas_addr.q;
+		temp.b[7] += ix;
+		bios_pg4->Phy[ix].ReassignmentWWID = temp.q;
+		bios_pg4->Phy[ix].ReassignmentDeviceName = bias.q;
+	}
+	r = mpt3sas_config_set_bios_pg4(ioc, &mpi_reply, bios_pg4, sz);
+
+out:
+	kfree(bios_pg4);
+	return r;
+}
+
+/**
+ * _base_static_config_pages - static start of day config pages
+ * @ioc: per adapter object
+ */
+static int
+_base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2ConfigReply_t mpi_reply;
+	u32 iounit_pg1_flags;
+	int tg_flags = 0;
+	int rc;
+	ioc->nvme_abort_timeout = 30;
+
+	rc = mpt3sas_config_get_manufacturing_pg0(ioc, &mpi_reply,
+	    &ioc->manu_pg0);
+	if (rc)
+		return rc;
+	if (ioc->ir_firmware) {
+		rc = mpt3sas_config_get_manufacturing_pg10(ioc, &mpi_reply,
+		    &ioc->manu_pg10);
+		if (rc)
+			return rc;
+	}
+
+	if (ioc->pdev->vendor == MPI2_MFGPAGE_VENDORID_ATTO) {
+		rc = mpt3sas_atto_init(ioc);
+		if (rc)
+			return rc;
+	}
+
+	/*
+	 * Ensure correct T10 PI operation if vendor left EEDPTagMode
+	 * flag unset in NVDATA.
+	 */
+	rc = mpt3sas_config_get_manufacturing_pg11(ioc, &mpi_reply,
+	    &ioc->manu_pg11);
+	if (rc)
+		return rc;
+	if (!ioc->is_gen35_ioc && ioc->manu_pg11.EEDPTagMode == 0) {
+		pr_err("%s: overriding NVDATA EEDPTagMode setting\n",
+		    ioc->name);
+		ioc->manu_pg11.EEDPTagMode &= ~0x3;
+		ioc->manu_pg11.EEDPTagMode |= 0x1;
+		mpt3sas_config_set_manufacturing_pg11(ioc, &mpi_reply,
+		    &ioc->manu_pg11);
+	}
+	if (ioc->manu_pg11.AddlFlags2 & NVME_TASK_MNGT_CUSTOM_MASK)
+		ioc->tm_custom_handling = 1;
+	else {
+		ioc->tm_custom_handling = 0;
+		if (ioc->manu_pg11.NVMeAbortTO < NVME_TASK_ABORT_MIN_TIMEOUT)
+			ioc->nvme_abort_timeout = NVME_TASK_ABORT_MIN_TIMEOUT;
+		else if (ioc->manu_pg11.NVMeAbortTO >
+					NVME_TASK_ABORT_MAX_TIMEOUT)
+			ioc->nvme_abort_timeout = NVME_TASK_ABORT_MAX_TIMEOUT;
+		else
+			ioc->nvme_abort_timeout = ioc->manu_pg11.NVMeAbortTO;
+	}
+	ioc->time_sync_interval =
+	    ioc->manu_pg11.TimeSyncInterval & MPT3SAS_TIMESYNC_MASK;
+	if (ioc->time_sync_interval) {
+		if (ioc->manu_pg11.TimeSyncInterval & MPT3SAS_TIMESYNC_UNIT_MASK)
+			ioc->time_sync_interval =
+			    ioc->time_sync_interval * SECONDS_PER_HOUR;
+		else
+			ioc->time_sync_interval =
+			    ioc->time_sync_interval * SECONDS_PER_MIN;
+		dinitprintk(ioc, ioc_info(ioc,
+		    "Driver-FW TimeSync interval is %d seconds. ManuPg11 TimeSync Unit is in %s\n",
+		    ioc->time_sync_interval, (ioc->manu_pg11.TimeSyncInterval &
+		    MPT3SAS_TIMESYNC_UNIT_MASK) ? "Hour" : "Minute"));
+	} else {
+		if (ioc->is_gen35_ioc)
+			ioc_warn(ioc,
+			    "TimeSync Interval in Manuf page-11 is not enabled. Periodic Time-Sync will be disabled\n");
+	}
+	rc = _base_assign_fw_reported_qd(ioc);
+	if (rc)
+		return rc;
+
+	/*
+	 * ATTO doesn't use bios page 2 and 3 for bios settings.
+	 */
+	if (ioc->pdev->vendor ==  MPI2_MFGPAGE_VENDORID_ATTO)
+		ioc->bios_pg3.BiosVersion = 0;
+	else {
+		rc = mpt3sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2);
+		if (rc)
+			return rc;
+		rc = mpt3sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3);
+		if (rc)
+			return rc;
+	}
+
+	rc = mpt3sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8);
+	if (rc)
+		return rc;
+	rc = mpt3sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0);
+	if (rc)
+		return rc;
+	rc = mpt3sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+	if (rc)
+		return rc;
+	rc = mpt3sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8);
+	if (rc)
+		return rc;
+	_base_display_ioc_capabilities(ioc);
+
+	/*
+	 * Enable task_set_full handling in iounit_pg1 when the
+	 * facts capabilities indicate that its supported.
+	 */
+	iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags);
+	if ((ioc->facts.IOCCapabilities &
+	    MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING))
+		iounit_pg1_flags &=
+		    ~MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
+	else
+		iounit_pg1_flags |=
+		    MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
+	ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags);
+	rc = mpt3sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+	if (rc)
+		return rc;
+
+	if (ioc->iounit_pg8.NumSensors)
+		ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors;
+	if (ioc->is_aero_ioc) {
+		rc = _base_update_ioc_page1_inlinewith_perf_mode(ioc);
+		if (rc)
+			return rc;
+	}
+	if (ioc->is_gen35_ioc) {
+		if (ioc->is_driver_loading) {
+			rc = _base_get_diag_triggers(ioc);
+			if (rc)
+				return rc;
+		} else {
+			/*
+			 * In case of online HBA FW update operation,
+			 * check whether updated FW supports the driver trigger
+			 * pages or not.
+			 * - If previous FW has not supported driver trigger
+			 *   pages and newer FW supports them then update these
+			 *   pages with current diag trigger values.
+			 * - If previous FW has supported driver trigger pages
+			 *   and new FW doesn't support them then disable
+			 *   support_trigger_pages flag.
+			 */
+			_base_check_for_trigger_pages_support(ioc, &tg_flags);
+			if (!ioc->supports_trigger_pages && tg_flags != -EFAULT)
+				_base_update_diag_trigger_pages(ioc);
+			else if (ioc->supports_trigger_pages &&
+			    tg_flags == -EFAULT)
+				ioc->supports_trigger_pages = 0;
+		}
+	}
+	return 0;
+}
+
+/**
+ * mpt3sas_free_enclosure_list - release memory
+ * @ioc: per adapter object
+ *
+ * Free memory allocated during enclosure add.
+ */
+void
+mpt3sas_free_enclosure_list(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct _enclosure_node *enclosure_dev, *enclosure_dev_next;
+
+	/* Free enclosure list */
+	list_for_each_entry_safe(enclosure_dev,
+			enclosure_dev_next, &ioc->enclosure_list, list) {
+		list_del(&enclosure_dev->list);
+		kfree(enclosure_dev);
+	}
+}
+
+/**
+ * _base_release_memory_pools - release memory
+ * @ioc: per adapter object
+ *
+ * Free memory allocated from _base_allocate_memory_pools.
+ */
+static void
+_base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc)
+{
+	int i = 0;
+	int j = 0;
+	int dma_alloc_count = 0;
+	struct chain_tracker *ct;
+	int count = ioc->rdpq_array_enable ? ioc->reply_queue_count : 1;
+
+	dexitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
+
+	if (ioc->request) {
+		dma_free_coherent(&ioc->pdev->dev, ioc->request_dma_sz,
+		    ioc->request,  ioc->request_dma);
+		dexitprintk(ioc,
+			    ioc_info(ioc, "request_pool(0x%p): free\n",
+				     ioc->request));
+		ioc->request = NULL;
+	}
+
+	if (ioc->sense) {
+		dma_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma);
+		dma_pool_destroy(ioc->sense_dma_pool);
+		dexitprintk(ioc,
+			    ioc_info(ioc, "sense_pool(0x%p): free\n",
+				     ioc->sense));
+		ioc->sense = NULL;
+	}
+
+	if (ioc->reply) {
+		dma_pool_free(ioc->reply_dma_pool, ioc->reply, ioc->reply_dma);
+		dma_pool_destroy(ioc->reply_dma_pool);
+		dexitprintk(ioc,
+			    ioc_info(ioc, "reply_pool(0x%p): free\n",
+				     ioc->reply));
+		ioc->reply = NULL;
+	}
+
+	if (ioc->reply_free) {
+		dma_pool_free(ioc->reply_free_dma_pool, ioc->reply_free,
+		    ioc->reply_free_dma);
+		dma_pool_destroy(ioc->reply_free_dma_pool);
+		dexitprintk(ioc,
+			    ioc_info(ioc, "reply_free_pool(0x%p): free\n",
+				     ioc->reply_free));
+		ioc->reply_free = NULL;
+	}
+
+	if (ioc->reply_post) {
+		dma_alloc_count = DIV_ROUND_UP(count,
+				RDPQ_MAX_INDEX_IN_ONE_CHUNK);
+		for (i = 0; i < count; i++) {
+			if (i % RDPQ_MAX_INDEX_IN_ONE_CHUNK == 0
+			    && dma_alloc_count) {
+				if (ioc->reply_post[i].reply_post_free) {
+					dma_pool_free(
+					    ioc->reply_post_free_dma_pool,
+					    ioc->reply_post[i].reply_post_free,
+					ioc->reply_post[i].reply_post_free_dma);
+					dexitprintk(ioc, ioc_info(ioc,
+					   "reply_post_free_pool(0x%p): free\n",
+					   ioc->reply_post[i].reply_post_free));
+					ioc->reply_post[i].reply_post_free =
+									NULL;
+				}
+				--dma_alloc_count;
+			}
+		}
+		dma_pool_destroy(ioc->reply_post_free_dma_pool);
+		if (ioc->reply_post_free_array &&
+			ioc->rdpq_array_enable) {
+			dma_pool_free(ioc->reply_post_free_array_dma_pool,
+			    ioc->reply_post_free_array,
+			    ioc->reply_post_free_array_dma);
+			ioc->reply_post_free_array = NULL;
+		}
+		dma_pool_destroy(ioc->reply_post_free_array_dma_pool);
+		kfree(ioc->reply_post);
+	}
+
+	if (ioc->pcie_sgl_dma_pool) {
+		for (i = 0; i < ioc->scsiio_depth; i++) {
+			dma_pool_free(ioc->pcie_sgl_dma_pool,
+					ioc->pcie_sg_lookup[i].pcie_sgl,
+					ioc->pcie_sg_lookup[i].pcie_sgl_dma);
+			ioc->pcie_sg_lookup[i].pcie_sgl = NULL;
+		}
+		dma_pool_destroy(ioc->pcie_sgl_dma_pool);
+	}
+	kfree(ioc->pcie_sg_lookup);
+	ioc->pcie_sg_lookup = NULL;
+
+	if (ioc->config_page) {
+		dexitprintk(ioc,
+			    ioc_info(ioc, "config_page(0x%p): free\n",
+				     ioc->config_page));
+		dma_free_coherent(&ioc->pdev->dev, ioc->config_page_sz,
+		    ioc->config_page, ioc->config_page_dma);
+	}
+
+	kfree(ioc->hpr_lookup);
+	ioc->hpr_lookup = NULL;
+	kfree(ioc->internal_lookup);
+	ioc->internal_lookup = NULL;
+	if (ioc->chain_lookup) {
+		for (i = 0; i < ioc->scsiio_depth; i++) {
+			for (j = ioc->chains_per_prp_buffer;
+			    j < ioc->chains_needed_per_io; j++) {
+				ct = &ioc->chain_lookup[i].chains_per_smid[j];
+				if (ct && ct->chain_buffer)
+					dma_pool_free(ioc->chain_dma_pool,
+						ct->chain_buffer,
+						ct->chain_buffer_dma);
+			}
+			kfree(ioc->chain_lookup[i].chains_per_smid);
+		}
+		dma_pool_destroy(ioc->chain_dma_pool);
+		kfree(ioc->chain_lookup);
+		ioc->chain_lookup = NULL;
+	}
+
+	kfree(ioc->io_queue_num);
+	ioc->io_queue_num = NULL;
+}
+
+/**
+ * mpt3sas_check_same_4gb_region - checks whether all reply queues in a set are
+ *	having same upper 32bits in their base memory address.
+ * @start_address: Base address of a reply queue set
+ * @pool_sz: Size of single Reply Descriptor Post Queues pool size
+ *
+ * Return: 1 if reply queues in a set have a same upper 32bits in their base
+ * memory address, else 0.
+ */
+static int
+mpt3sas_check_same_4gb_region(dma_addr_t start_address, u32 pool_sz)
+{
+	dma_addr_t end_address;
+
+	end_address = start_address + pool_sz - 1;
+
+	if (upper_32_bits(start_address) == upper_32_bits(end_address))
+		return 1;
+	else
+		return 0;
+}
+
+/**
+ * _base_reduce_hba_queue_depth- Retry with reduced queue depth
+ * @ioc: Adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ **/
+static inline int
+_base_reduce_hba_queue_depth(struct MPT3SAS_ADAPTER *ioc)
+{
+	int reduce_sz = 64;
+
+	if ((ioc->hba_queue_depth - reduce_sz) >
+	    (ioc->internal_depth + INTERNAL_SCSIIO_CMDS_COUNT)) {
+		ioc->hba_queue_depth -= reduce_sz;
+		return 0;
+	} else
+		return -ENOMEM;
+}
+
+/**
+ * _base_allocate_pcie_sgl_pool - Allocating DMA'able memory
+ *			for pcie sgl pools.
+ * @ioc: Adapter object
+ * @sz: DMA Pool size
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+
+static int
+_base_allocate_pcie_sgl_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz)
+{
+	int i = 0, j = 0;
+	struct chain_tracker *ct;
+
+	ioc->pcie_sgl_dma_pool =
+	    dma_pool_create("PCIe SGL pool", &ioc->pdev->dev, sz,
+	    ioc->page_size, 0);
+	if (!ioc->pcie_sgl_dma_pool) {
+		ioc_err(ioc, "PCIe SGL pool: dma_pool_create failed\n");
+		return -ENOMEM;
+	}
+
+	ioc->chains_per_prp_buffer = sz/ioc->chain_segment_sz;
+	ioc->chains_per_prp_buffer =
+	    min(ioc->chains_per_prp_buffer, ioc->chains_needed_per_io);
+	for (i = 0; i < ioc->scsiio_depth; i++) {
+		ioc->pcie_sg_lookup[i].pcie_sgl =
+		    dma_pool_alloc(ioc->pcie_sgl_dma_pool, GFP_KERNEL,
+		    &ioc->pcie_sg_lookup[i].pcie_sgl_dma);
+		if (!ioc->pcie_sg_lookup[i].pcie_sgl) {
+			ioc_err(ioc, "PCIe SGL pool: dma_pool_alloc failed\n");
+			return -EAGAIN;
+		}
+
+		if (!mpt3sas_check_same_4gb_region(
+		    ioc->pcie_sg_lookup[i].pcie_sgl_dma, sz)) {
+			ioc_err(ioc, "PCIE SGLs are not in same 4G !! pcie sgl (0x%p) dma = (0x%llx)\n",
+			    ioc->pcie_sg_lookup[i].pcie_sgl,
+			    (unsigned long long)
+			    ioc->pcie_sg_lookup[i].pcie_sgl_dma);
+			ioc->use_32bit_dma = true;
+			return -EAGAIN;
+		}
+
+		for (j = 0; j < ioc->chains_per_prp_buffer; j++) {
+			ct = &ioc->chain_lookup[i].chains_per_smid[j];
+			ct->chain_buffer =
+			    ioc->pcie_sg_lookup[i].pcie_sgl +
+			    (j * ioc->chain_segment_sz);
+			ct->chain_buffer_dma =
+			    ioc->pcie_sg_lookup[i].pcie_sgl_dma +
+			    (j * ioc->chain_segment_sz);
+		}
+	}
+	dinitprintk(ioc, ioc_info(ioc,
+	    "PCIe sgl pool depth(%d), element_size(%d), pool_size(%d kB)\n",
+	    ioc->scsiio_depth, sz, (sz * ioc->scsiio_depth)/1024));
+	dinitprintk(ioc, ioc_info(ioc,
+	    "Number of chains can fit in a PRP page(%d)\n",
+	    ioc->chains_per_prp_buffer));
+	return 0;
+}
+
+/**
+ * _base_allocate_chain_dma_pool - Allocating DMA'able memory
+ *			for chain dma pool.
+ * @ioc: Adapter object
+ * @sz: DMA Pool size
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_allocate_chain_dma_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz)
+{
+	int i = 0, j = 0;
+	struct chain_tracker *ctr;
+
+	ioc->chain_dma_pool = dma_pool_create("chain pool", &ioc->pdev->dev,
+	    ioc->chain_segment_sz, 16, 0);
+	if (!ioc->chain_dma_pool)
+		return -ENOMEM;
+
+	for (i = 0; i < ioc->scsiio_depth; i++) {
+		for (j = ioc->chains_per_prp_buffer;
+		    j < ioc->chains_needed_per_io; j++) {
+			ctr = &ioc->chain_lookup[i].chains_per_smid[j];
+			ctr->chain_buffer = dma_pool_alloc(ioc->chain_dma_pool,
+			    GFP_KERNEL, &ctr->chain_buffer_dma);
+			if (!ctr->chain_buffer)
+				return -EAGAIN;
+			if (!mpt3sas_check_same_4gb_region(
+			    ctr->chain_buffer_dma, ioc->chain_segment_sz)) {
+				ioc_err(ioc,
+				    "Chain buffers are not in same 4G !!! Chain buff (0x%p) dma = (0x%llx)\n",
+				    ctr->chain_buffer,
+				    (unsigned long long)ctr->chain_buffer_dma);
+				ioc->use_32bit_dma = true;
+				return -EAGAIN;
+			}
+		}
+	}
+	dinitprintk(ioc, ioc_info(ioc,
+	    "chain_lookup depth (%d), frame_size(%d), pool_size(%d kB)\n",
+	    ioc->scsiio_depth, ioc->chain_segment_sz, ((ioc->scsiio_depth *
+	    (ioc->chains_needed_per_io - ioc->chains_per_prp_buffer) *
+	    ioc->chain_segment_sz))/1024));
+	return 0;
+}
+
+/**
+ * _base_allocate_sense_dma_pool - Allocating DMA'able memory
+ *			for sense dma pool.
+ * @ioc: Adapter object
+ * @sz: DMA Pool size
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_allocate_sense_dma_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz)
+{
+	ioc->sense_dma_pool =
+	    dma_pool_create("sense pool", &ioc->pdev->dev, sz, 4, 0);
+	if (!ioc->sense_dma_pool)
+		return -ENOMEM;
+	ioc->sense = dma_pool_alloc(ioc->sense_dma_pool,
+	    GFP_KERNEL, &ioc->sense_dma);
+	if (!ioc->sense)
+		return -EAGAIN;
+	if (!mpt3sas_check_same_4gb_region(ioc->sense_dma, sz)) {
+		dinitprintk(ioc, pr_err(
+		    "Bad Sense Pool! sense (0x%p) sense_dma = (0x%llx)\n",
+		    ioc->sense, (unsigned long long) ioc->sense_dma));
+		ioc->use_32bit_dma = true;
+		return -EAGAIN;
+	}
+	ioc_info(ioc,
+	    "sense pool(0x%p) - dma(0x%llx): depth(%d), element_size(%d), pool_size (%d kB)\n",
+	    ioc->sense, (unsigned long long)ioc->sense_dma,
+	    ioc->scsiio_depth, SCSI_SENSE_BUFFERSIZE, sz/1024);
+	return 0;
+}
+
+/**
+ * _base_allocate_reply_pool - Allocating DMA'able memory
+ *			for reply pool.
+ * @ioc: Adapter object
+ * @sz: DMA Pool size
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_allocate_reply_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz)
+{
+	/* reply pool, 4 byte align */
+	ioc->reply_dma_pool = dma_pool_create("reply pool",
+	    &ioc->pdev->dev, sz, 4, 0);
+	if (!ioc->reply_dma_pool)
+		return -ENOMEM;
+	ioc->reply = dma_pool_alloc(ioc->reply_dma_pool, GFP_KERNEL,
+	    &ioc->reply_dma);
+	if (!ioc->reply)
+		return -EAGAIN;
+	if (!mpt3sas_check_same_4gb_region(ioc->reply_dma, sz)) {
+		dinitprintk(ioc, pr_err(
+		    "Bad Reply Pool! Reply (0x%p) Reply dma = (0x%llx)\n",
+		    ioc->reply, (unsigned long long) ioc->reply_dma));
+		ioc->use_32bit_dma = true;
+		return -EAGAIN;
+	}
+	ioc->reply_dma_min_address = (u32)(ioc->reply_dma);
+	ioc->reply_dma_max_address = (u32)(ioc->reply_dma) + sz;
+	ioc_info(ioc,
+	    "reply pool(0x%p) - dma(0x%llx): depth(%d), frame_size(%d), pool_size(%d kB)\n",
+	    ioc->reply, (unsigned long long)ioc->reply_dma,
+	    ioc->reply_free_queue_depth, ioc->reply_sz, sz/1024);
+	return 0;
+}
+
+/**
+ * _base_allocate_reply_free_dma_pool - Allocating DMA'able memory
+ *			for reply free dma pool.
+ * @ioc: Adapter object
+ * @sz: DMA Pool size
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_allocate_reply_free_dma_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz)
+{
+	/* reply free queue, 16 byte align */
+	ioc->reply_free_dma_pool = dma_pool_create(
+	    "reply_free pool", &ioc->pdev->dev, sz, 16, 0);
+	if (!ioc->reply_free_dma_pool)
+		return -ENOMEM;
+	ioc->reply_free = dma_pool_alloc(ioc->reply_free_dma_pool,
+	    GFP_KERNEL, &ioc->reply_free_dma);
+	if (!ioc->reply_free)
+		return -EAGAIN;
+	if (!mpt3sas_check_same_4gb_region(ioc->reply_free_dma, sz)) {
+		dinitprintk(ioc,
+		    pr_err("Bad Reply Free Pool! Reply Free (0x%p) Reply Free dma = (0x%llx)\n",
+		    ioc->reply_free, (unsigned long long) ioc->reply_free_dma));
+		ioc->use_32bit_dma = true;
+		return -EAGAIN;
+	}
+	memset(ioc->reply_free, 0, sz);
+	dinitprintk(ioc, ioc_info(ioc,
+	    "reply_free pool(0x%p): depth(%d), element_size(%d), pool_size(%d kB)\n",
+	    ioc->reply_free, ioc->reply_free_queue_depth, 4, sz/1024));
+	dinitprintk(ioc, ioc_info(ioc,
+	    "reply_free_dma (0x%llx)\n",
+	    (unsigned long long)ioc->reply_free_dma));
+	return 0;
+}
+
+/**
+ * _base_allocate_reply_post_free_array - Allocating DMA'able memory
+ *			for reply post free array.
+ * @ioc: Adapter object
+ * @reply_post_free_array_sz: DMA Pool size
+ * Return: 0 for success, non-zero for failure.
+ */
+
+static int
+_base_allocate_reply_post_free_array(struct MPT3SAS_ADAPTER *ioc,
+	u32 reply_post_free_array_sz)
+{
+	ioc->reply_post_free_array_dma_pool =
+	    dma_pool_create("reply_post_free_array pool",
+	    &ioc->pdev->dev, reply_post_free_array_sz, 16, 0);
+	if (!ioc->reply_post_free_array_dma_pool)
+		return -ENOMEM;
+	ioc->reply_post_free_array =
+	    dma_pool_alloc(ioc->reply_post_free_array_dma_pool,
+	    GFP_KERNEL, &ioc->reply_post_free_array_dma);
+	if (!ioc->reply_post_free_array)
+		return -EAGAIN;
+	if (!mpt3sas_check_same_4gb_region(ioc->reply_post_free_array_dma,
+	    reply_post_free_array_sz)) {
+		dinitprintk(ioc, pr_err(
+		    "Bad Reply Free Pool! Reply Free (0x%p) Reply Free dma = (0x%llx)\n",
+		    ioc->reply_free,
+		    (unsigned long long) ioc->reply_free_dma));
+		ioc->use_32bit_dma = true;
+		return -EAGAIN;
+	}
+	return 0;
+}
+/**
+ * base_alloc_rdpq_dma_pool - Allocating DMA'able memory
+ *                     for reply queues.
+ * @ioc: per adapter object
+ * @sz: DMA Pool size
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+base_alloc_rdpq_dma_pool(struct MPT3SAS_ADAPTER *ioc, int sz)
+{
+	int i = 0;
+	u32 dma_alloc_count = 0;
+	int reply_post_free_sz = ioc->reply_post_queue_depth *
+		sizeof(Mpi2DefaultReplyDescriptor_t);
+	int count = ioc->rdpq_array_enable ? ioc->reply_queue_count : 1;
+
+	ioc->reply_post = kcalloc(count, sizeof(struct reply_post_struct),
+			GFP_KERNEL);
+	if (!ioc->reply_post)
+		return -ENOMEM;
+	/*
+	 *  For INVADER_SERIES each set of 8 reply queues(0-7, 8-15, ..) and
+	 *  VENTURA_SERIES each set of 16 reply queues(0-15, 16-31, ..) should
+	 *  be within 4GB boundary i.e reply queues in a set must have same
+	 *  upper 32-bits in their memory address. so here driver is allocating
+	 *  the DMA'able memory for reply queues according.
+	 *  Driver uses limitation of
+	 *  VENTURA_SERIES to manage INVADER_SERIES as well.
+	 */
+	dma_alloc_count = DIV_ROUND_UP(count,
+				RDPQ_MAX_INDEX_IN_ONE_CHUNK);
+	ioc->reply_post_free_dma_pool =
+		dma_pool_create("reply_post_free pool",
+		    &ioc->pdev->dev, sz, 16, 0);
+	if (!ioc->reply_post_free_dma_pool)
+		return -ENOMEM;
+	for (i = 0; i < count; i++) {
+		if ((i % RDPQ_MAX_INDEX_IN_ONE_CHUNK == 0) && dma_alloc_count) {
+			ioc->reply_post[i].reply_post_free =
+			    dma_pool_zalloc(ioc->reply_post_free_dma_pool,
+				GFP_KERNEL,
+				&ioc->reply_post[i].reply_post_free_dma);
+			if (!ioc->reply_post[i].reply_post_free)
+				return -ENOMEM;
+			/*
+			 * Each set of RDPQ pool must satisfy 4gb boundary
+			 * restriction.
+			 * 1) Check if allocated resources for RDPQ pool are in
+			 *	the same 4GB range.
+			 * 2) If #1 is true, continue with 64 bit DMA.
+			 * 3) If #1 is false, return 1. which means free all the
+			 * resources and set DMA mask to 32 and allocate.
+			 */
+			if (!mpt3sas_check_same_4gb_region(
+				ioc->reply_post[i].reply_post_free_dma, sz)) {
+				dinitprintk(ioc,
+				    ioc_err(ioc, "bad Replypost free pool(0x%p)"
+				    "reply_post_free_dma = (0x%llx)\n",
+				    ioc->reply_post[i].reply_post_free,
+				    (unsigned long long)
+				    ioc->reply_post[i].reply_post_free_dma));
+				return -EAGAIN;
+			}
+			dma_alloc_count--;
+
+		} else {
+			ioc->reply_post[i].reply_post_free =
+			    (Mpi2ReplyDescriptorsUnion_t *)
+			    ((long)ioc->reply_post[i-1].reply_post_free
+			    + reply_post_free_sz);
+			ioc->reply_post[i].reply_post_free_dma =
+			    (dma_addr_t)
+			    (ioc->reply_post[i-1].reply_post_free_dma +
+			    reply_post_free_sz);
+		}
+	}
+	return 0;
+}
+
+/**
+ * _base_allocate_memory_pools - allocate start of day memory pools
+ * @ioc: per adapter object
+ *
+ * Return: 0 success, anything else error.
+ */
+static int
+_base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct mpt3sas_facts *facts;
+	u16 max_sge_elements;
+	u16 chains_needed_per_io;
+	u32 sz, total_sz, reply_post_free_sz, reply_post_free_array_sz;
+	u32 retry_sz;
+	u32 rdpq_sz = 0, sense_sz = 0;
+	u16 max_request_credit, nvme_blocks_needed;
+	unsigned short sg_tablesize;
+	u16 sge_size;
+	int i;
+	int ret = 0, rc = 0;
+
+	dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
+
+
+	retry_sz = 0;
+	facts = &ioc->facts;
+
+	/* command line tunables for max sgl entries */
+	if (max_sgl_entries != -1)
+		sg_tablesize = max_sgl_entries;
+	else {
+		if (ioc->hba_mpi_version_belonged == MPI2_VERSION)
+			sg_tablesize = MPT2SAS_SG_DEPTH;
+		else
+			sg_tablesize = MPT3SAS_SG_DEPTH;
+	}
+
+	/* max sgl entries <= MPT_KDUMP_MIN_PHYS_SEGMENTS in KDUMP mode */
+	if (reset_devices)
+		sg_tablesize = min_t(unsigned short, sg_tablesize,
+		   MPT_KDUMP_MIN_PHYS_SEGMENTS);
+
+	if (ioc->is_mcpu_endpoint)
+		ioc->shost->sg_tablesize = MPT_MIN_PHYS_SEGMENTS;
+	else {
+		if (sg_tablesize < MPT_MIN_PHYS_SEGMENTS)
+			sg_tablesize = MPT_MIN_PHYS_SEGMENTS;
+		else if (sg_tablesize > MPT_MAX_PHYS_SEGMENTS) {
+			sg_tablesize = min_t(unsigned short, sg_tablesize,
+					SG_MAX_SEGMENTS);
+			ioc_warn(ioc, "sg_tablesize(%u) is bigger than kernel defined SG_CHUNK_SIZE(%u)\n",
+				 sg_tablesize, MPT_MAX_PHYS_SEGMENTS);
+		}
+		ioc->shost->sg_tablesize = sg_tablesize;
+	}
+
+	ioc->internal_depth = min_t(int, (facts->HighPriorityCredit + (5)),
+		(facts->RequestCredit / 4));
+	if (ioc->internal_depth < INTERNAL_CMDS_COUNT) {
+		if (facts->RequestCredit <= (INTERNAL_CMDS_COUNT +
+				INTERNAL_SCSIIO_CMDS_COUNT)) {
+			ioc_err(ioc, "IOC doesn't have enough Request Credits, it has just %d number of credits\n",
+				facts->RequestCredit);
+			return -ENOMEM;
+		}
+		ioc->internal_depth = 10;
+	}
+
+	ioc->hi_priority_depth = ioc->internal_depth - (5);
+	/* command line tunables  for max controller queue depth */
+	if (max_queue_depth != -1 && max_queue_depth != 0) {
+		max_request_credit = min_t(u16, max_queue_depth +
+			ioc->internal_depth, facts->RequestCredit);
+		if (max_request_credit > MAX_HBA_QUEUE_DEPTH)
+			max_request_credit =  MAX_HBA_QUEUE_DEPTH;
+	} else if (reset_devices)
+		max_request_credit = min_t(u16, facts->RequestCredit,
+		    (MPT3SAS_KDUMP_SCSI_IO_DEPTH + ioc->internal_depth));
+	else
+		max_request_credit = min_t(u16, facts->RequestCredit,
+		    MAX_HBA_QUEUE_DEPTH);
+
+	/* Firmware maintains additional facts->HighPriorityCredit number of
+	 * credits for HiPriprity Request messages, so hba queue depth will be
+	 * sum of max_request_credit and high priority queue depth.
+	 */
+	ioc->hba_queue_depth = max_request_credit + ioc->hi_priority_depth;
+
+	/* request frame size */
+	ioc->request_sz = facts->IOCRequestFrameSize * 4;
+
+	/* reply frame size */
+	ioc->reply_sz = facts->ReplyFrameSize * 4;
+
+	/* chain segment size */
+	if (ioc->hba_mpi_version_belonged != MPI2_VERSION) {
+		if (facts->IOCMaxChainSegmentSize)
+			ioc->chain_segment_sz =
+					facts->IOCMaxChainSegmentSize *
+					MAX_CHAIN_ELEMT_SZ;
+		else
+		/* set to 128 bytes size if IOCMaxChainSegmentSize is zero */
+			ioc->chain_segment_sz = DEFAULT_NUM_FWCHAIN_ELEMTS *
+						    MAX_CHAIN_ELEMT_SZ;
+	} else
+		ioc->chain_segment_sz = ioc->request_sz;
+
+	/* calculate the max scatter element size */
+	sge_size = max_t(u16, ioc->sge_size, ioc->sge_size_ieee);
+
+ retry_allocation:
+	total_sz = 0;
+	/* calculate number of sg elements left over in the 1st frame */
+	max_sge_elements = ioc->request_sz - ((sizeof(Mpi2SCSIIORequest_t) -
+	    sizeof(Mpi2SGEIOUnion_t)) + sge_size);
+	ioc->max_sges_in_main_message = max_sge_elements/sge_size;
+
+	/* now do the same for a chain buffer */
+	max_sge_elements = ioc->chain_segment_sz - sge_size;
+	ioc->max_sges_in_chain_message = max_sge_elements/sge_size;
+
+	/*
+	 *  MPT3SAS_SG_DEPTH = CONFIG_FUSION_MAX_SGE
+	 */
+	chains_needed_per_io = ((ioc->shost->sg_tablesize -
+	   ioc->max_sges_in_main_message)/ioc->max_sges_in_chain_message)
+	    + 1;
+	if (chains_needed_per_io > facts->MaxChainDepth) {
+		chains_needed_per_io = facts->MaxChainDepth;
+		ioc->shost->sg_tablesize = min_t(u16,
+		ioc->max_sges_in_main_message + (ioc->max_sges_in_chain_message
+		* chains_needed_per_io), ioc->shost->sg_tablesize);
+	}
+	ioc->chains_needed_per_io = chains_needed_per_io;
+
+	/* reply free queue sizing - taking into account for 64 FW events */
+	ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64;
+
+	/* mCPU manage single counters for simplicity */
+	if (ioc->is_mcpu_endpoint)
+		ioc->reply_post_queue_depth = ioc->reply_free_queue_depth;
+	else {
+		/* calculate reply descriptor post queue depth */
+		ioc->reply_post_queue_depth = ioc->hba_queue_depth +
+			ioc->reply_free_queue_depth +  1;
+		/* align the reply post queue on the next 16 count boundary */
+		if (ioc->reply_post_queue_depth % 16)
+			ioc->reply_post_queue_depth += 16 -
+				(ioc->reply_post_queue_depth % 16);
+	}
+
+	if (ioc->reply_post_queue_depth >
+	    facts->MaxReplyDescriptorPostQueueDepth) {
+		ioc->reply_post_queue_depth =
+				facts->MaxReplyDescriptorPostQueueDepth -
+		    (facts->MaxReplyDescriptorPostQueueDepth % 16);
+		ioc->hba_queue_depth =
+				((ioc->reply_post_queue_depth - 64) / 2) - 1;
+		ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64;
+	}
+
+	ioc_info(ioc,
+	    "scatter gather: sge_in_main_msg(%d), sge_per_chain(%d), "
+	    "sge_per_io(%d), chains_per_io(%d)\n",
+	    ioc->max_sges_in_main_message,
+	    ioc->max_sges_in_chain_message,
+	    ioc->shost->sg_tablesize,
+	    ioc->chains_needed_per_io);
+
+	/* reply post queue, 16 byte align */
+	reply_post_free_sz = ioc->reply_post_queue_depth *
+	    sizeof(Mpi2DefaultReplyDescriptor_t);
+	rdpq_sz = reply_post_free_sz * RDPQ_MAX_INDEX_IN_ONE_CHUNK;
+	if ((_base_is_controller_msix_enabled(ioc) && !ioc->rdpq_array_enable)
+	    || (ioc->reply_queue_count < RDPQ_MAX_INDEX_IN_ONE_CHUNK))
+		rdpq_sz = reply_post_free_sz * ioc->reply_queue_count;
+	ret = base_alloc_rdpq_dma_pool(ioc, rdpq_sz);
+	if (ret == -EAGAIN) {
+		/*
+		 * Free allocated bad RDPQ memory pools.
+		 * Change dma coherent mask to 32 bit and reallocate RDPQ
+		 */
+		_base_release_memory_pools(ioc);
+		ioc->use_32bit_dma = true;
+		if (_base_config_dma_addressing(ioc, ioc->pdev) != 0) {
+			ioc_err(ioc,
+			    "32 DMA mask failed %s\n", pci_name(ioc->pdev));
+			return -ENODEV;
+		}
+		if (base_alloc_rdpq_dma_pool(ioc, rdpq_sz))
+			return -ENOMEM;
+	} else if (ret == -ENOMEM)
+		return -ENOMEM;
+	total_sz = rdpq_sz * (!ioc->rdpq_array_enable ? 1 :
+	    DIV_ROUND_UP(ioc->reply_queue_count, RDPQ_MAX_INDEX_IN_ONE_CHUNK));
+	ioc->scsiio_depth = ioc->hba_queue_depth -
+	    ioc->hi_priority_depth - ioc->internal_depth;
+
+	/* set the scsi host can_queue depth
+	 * with some internal commands that could be outstanding
+	 */
+	ioc->shost->can_queue = ioc->scsiio_depth - INTERNAL_SCSIIO_CMDS_COUNT;
+	dinitprintk(ioc,
+		    ioc_info(ioc, "scsi host: can_queue depth (%d)\n",
+			     ioc->shost->can_queue));
+
+	/* contiguous pool for request and chains, 16 byte align, one extra "
+	 * "frame for smid=0
+	 */
+	ioc->chain_depth = ioc->chains_needed_per_io * ioc->scsiio_depth;
+	sz = ((ioc->scsiio_depth + 1) * ioc->request_sz);
+
+	/* hi-priority queue */
+	sz += (ioc->hi_priority_depth * ioc->request_sz);
+
+	/* internal queue */
+	sz += (ioc->internal_depth * ioc->request_sz);
+
+	ioc->request_dma_sz = sz;
+	ioc->request = dma_alloc_coherent(&ioc->pdev->dev, sz,
+			&ioc->request_dma, GFP_KERNEL);
+	if (!ioc->request) {
+		ioc_err(ioc, "request pool: dma_alloc_coherent failed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), total(%d kB)\n",
+			ioc->hba_queue_depth, ioc->chains_needed_per_io,
+			ioc->request_sz, sz / 1024);
+		if (ioc->scsiio_depth < MPT3SAS_SAS_QUEUE_DEPTH)
+			goto out;
+		retry_sz = 64;
+		ioc->hba_queue_depth -= retry_sz;
+		_base_release_memory_pools(ioc);
+		goto retry_allocation;
+	}
+
+	if (retry_sz)
+		ioc_err(ioc, "request pool: dma_alloc_coherent succeed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), total(%d kb)\n",
+			ioc->hba_queue_depth, ioc->chains_needed_per_io,
+			ioc->request_sz, sz / 1024);
+
+	/* hi-priority queue */
+	ioc->hi_priority = ioc->request + ((ioc->scsiio_depth + 1) *
+	    ioc->request_sz);
+	ioc->hi_priority_dma = ioc->request_dma + ((ioc->scsiio_depth + 1) *
+	    ioc->request_sz);
+
+	/* internal queue */
+	ioc->internal = ioc->hi_priority + (ioc->hi_priority_depth *
+	    ioc->request_sz);
+	ioc->internal_dma = ioc->hi_priority_dma + (ioc->hi_priority_depth *
+	    ioc->request_sz);
+
+	ioc_info(ioc,
+	    "request pool(0x%p) - dma(0x%llx): "
+	    "depth(%d), frame_size(%d), pool_size(%d kB)\n",
+	    ioc->request, (unsigned long long) ioc->request_dma,
+	    ioc->hba_queue_depth, ioc->request_sz,
+	    (ioc->hba_queue_depth * ioc->request_sz) / 1024);
+
+	total_sz += sz;
+
+	dinitprintk(ioc,
+		    ioc_info(ioc, "scsiio(0x%p): depth(%d)\n",
+			     ioc->request, ioc->scsiio_depth));
+
+	ioc->chain_depth = min_t(u32, ioc->chain_depth, MAX_CHAIN_DEPTH);
+	sz = ioc->scsiio_depth * sizeof(struct chain_lookup);
+	ioc->chain_lookup = kzalloc(sz, GFP_KERNEL);
+	if (!ioc->chain_lookup) {
+		ioc_err(ioc, "chain_lookup: __get_free_pages failed\n");
+		goto out;
+	}
+
+	sz = ioc->chains_needed_per_io * sizeof(struct chain_tracker);
+	for (i = 0; i < ioc->scsiio_depth; i++) {
+		ioc->chain_lookup[i].chains_per_smid = kzalloc(sz, GFP_KERNEL);
+		if (!ioc->chain_lookup[i].chains_per_smid) {
+			ioc_err(ioc, "chain_lookup: kzalloc failed\n");
+			goto out;
+		}
+	}
+
+	/* initialize hi-priority queue smid's */
+	ioc->hpr_lookup = kcalloc(ioc->hi_priority_depth,
+	    sizeof(struct request_tracker), GFP_KERNEL);
+	if (!ioc->hpr_lookup) {
+		ioc_err(ioc, "hpr_lookup: kcalloc failed\n");
+		goto out;
+	}
+	ioc->hi_priority_smid = ioc->scsiio_depth + 1;
+	dinitprintk(ioc,
+		    ioc_info(ioc, "hi_priority(0x%p): depth(%d), start smid(%d)\n",
+			     ioc->hi_priority,
+			     ioc->hi_priority_depth, ioc->hi_priority_smid));
+
+	/* initialize internal queue smid's */
+	ioc->internal_lookup = kcalloc(ioc->internal_depth,
+	    sizeof(struct request_tracker), GFP_KERNEL);
+	if (!ioc->internal_lookup) {
+		ioc_err(ioc, "internal_lookup: kcalloc failed\n");
+		goto out;
+	}
+	ioc->internal_smid = ioc->hi_priority_smid + ioc->hi_priority_depth;
+	dinitprintk(ioc,
+		    ioc_info(ioc, "internal(0x%p): depth(%d), start smid(%d)\n",
+			     ioc->internal,
+			     ioc->internal_depth, ioc->internal_smid));
+
+	ioc->io_queue_num = kcalloc(ioc->scsiio_depth,
+	    sizeof(u16), GFP_KERNEL);
+	if (!ioc->io_queue_num)
+		goto out;
+	/*
+	 * The number of NVMe page sized blocks needed is:
+	 *     (((sg_tablesize * 8) - 1) / (page_size - 8)) + 1
+	 * ((sg_tablesize * 8) - 1) is the max PRP's minus the first PRP entry
+	 * that is placed in the main message frame.  8 is the size of each PRP
+	 * entry or PRP list pointer entry.  8 is subtracted from page_size
+	 * because of the PRP list pointer entry at the end of a page, so this
+	 * is not counted as a PRP entry.  The 1 added page is a round up.
+	 *
+	 * To avoid allocation failures due to the amount of memory that could
+	 * be required for NVMe PRP's, only each set of NVMe blocks will be
+	 * contiguous, so a new set is allocated for each possible I/O.
+	 */
+
+	ioc->chains_per_prp_buffer = 0;
+	if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES) {
+		nvme_blocks_needed =
+			(ioc->shost->sg_tablesize * NVME_PRP_SIZE) - 1;
+		nvme_blocks_needed /= (ioc->page_size - NVME_PRP_SIZE);
+		nvme_blocks_needed++;
+
+		sz = sizeof(struct pcie_sg_list) * ioc->scsiio_depth;
+		ioc->pcie_sg_lookup = kzalloc(sz, GFP_KERNEL);
+		if (!ioc->pcie_sg_lookup) {
+			ioc_info(ioc, "PCIe SGL lookup: kzalloc failed\n");
+			goto out;
+		}
+		sz = nvme_blocks_needed * ioc->page_size;
+		rc = _base_allocate_pcie_sgl_pool(ioc, sz);
+		if (rc == -ENOMEM)
+			return -ENOMEM;
+		else if (rc == -EAGAIN)
+			goto try_32bit_dma;
+		total_sz += sz * ioc->scsiio_depth;
+	}
+
+	rc = _base_allocate_chain_dma_pool(ioc, ioc->chain_segment_sz);
+	if (rc == -ENOMEM)
+		return -ENOMEM;
+	else if (rc == -EAGAIN)
+		goto try_32bit_dma;
+	total_sz += ioc->chain_segment_sz * ((ioc->chains_needed_per_io -
+		ioc->chains_per_prp_buffer) * ioc->scsiio_depth);
+	dinitprintk(ioc,
+	    ioc_info(ioc, "chain pool depth(%d), frame_size(%d), pool_size(%d kB)\n",
+	    ioc->chain_depth, ioc->chain_segment_sz,
+	    (ioc->chain_depth * ioc->chain_segment_sz) / 1024));
+	/* sense buffers, 4 byte align */
+	sense_sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE;
+	rc = _base_allocate_sense_dma_pool(ioc, sense_sz);
+	if (rc  == -ENOMEM)
+		return -ENOMEM;
+	else if (rc == -EAGAIN)
+		goto try_32bit_dma;
+	total_sz += sense_sz;
+	/* reply pool, 4 byte align */
+	sz = ioc->reply_free_queue_depth * ioc->reply_sz;
+	rc = _base_allocate_reply_pool(ioc, sz);
+	if (rc == -ENOMEM)
+		return -ENOMEM;
+	else if (rc == -EAGAIN)
+		goto try_32bit_dma;
+	total_sz += sz;
+
+	/* reply free queue, 16 byte align */
+	sz = ioc->reply_free_queue_depth * 4;
+	rc = _base_allocate_reply_free_dma_pool(ioc, sz);
+	if (rc  == -ENOMEM)
+		return -ENOMEM;
+	else if (rc == -EAGAIN)
+		goto try_32bit_dma;
+	dinitprintk(ioc,
+		    ioc_info(ioc, "reply_free_dma (0x%llx)\n",
+			     (unsigned long long)ioc->reply_free_dma));
+	total_sz += sz;
+	if (ioc->rdpq_array_enable) {
+		reply_post_free_array_sz = ioc->reply_queue_count *
+		    sizeof(Mpi2IOCInitRDPQArrayEntry);
+		rc = _base_allocate_reply_post_free_array(ioc,
+		    reply_post_free_array_sz);
+		if (rc == -ENOMEM)
+			return -ENOMEM;
+		else if (rc == -EAGAIN)
+			goto try_32bit_dma;
+	}
+	ioc->config_page_sz = 512;
+	ioc->config_page = dma_alloc_coherent(&ioc->pdev->dev,
+			ioc->config_page_sz, &ioc->config_page_dma, GFP_KERNEL);
+	if (!ioc->config_page) {
+		ioc_err(ioc, "config page: dma_pool_alloc failed\n");
+		goto out;
+	}
+
+	ioc_info(ioc, "config page(0x%p) - dma(0x%llx): size(%d)\n",
+	    ioc->config_page, (unsigned long long)ioc->config_page_dma,
+	    ioc->config_page_sz);
+	total_sz += ioc->config_page_sz;
+
+	ioc_info(ioc, "Allocated physical memory: size(%d kB)\n",
+		 total_sz / 1024);
+	ioc_info(ioc, "Current Controller Queue Depth(%d),Max Controller Queue Depth(%d)\n",
+		 ioc->shost->can_queue, facts->RequestCredit);
+	ioc_info(ioc, "Scatter Gather Elements per IO(%d)\n",
+		 ioc->shost->sg_tablesize);
+	return 0;
+
+try_32bit_dma:
+	_base_release_memory_pools(ioc);
+	if (ioc->use_32bit_dma && (ioc->dma_mask > 32)) {
+		/* Change dma coherent mask to 32 bit and reallocate */
+		if (_base_config_dma_addressing(ioc, ioc->pdev) != 0) {
+			pr_err("Setting 32 bit coherent DMA mask Failed %s\n",
+			    pci_name(ioc->pdev));
+			return -ENODEV;
+		}
+	} else if (_base_reduce_hba_queue_depth(ioc) != 0)
+		return -ENOMEM;
+	goto retry_allocation;
+
+ out:
+	return -ENOMEM;
+}
+
+/**
+ * mpt3sas_base_get_iocstate - Get the current state of a MPT adapter.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @cooked: Request raw or cooked IOC state
+ *
+ * Return: all IOC Doorbell register bits if cooked==0, else just the
+ * Doorbell bits in MPI_IOC_STATE_MASK.
+ */
+u32
+mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked)
+{
+	u32 s, sc;
+
+	s = ioc->base_readl_ext_retry(&ioc->chip->Doorbell);
+	sc = s & MPI2_IOC_STATE_MASK;
+	return cooked ? sc : s;
+}
+
+/**
+ * _base_wait_on_iocstate - waiting on a particular ioc state
+ * @ioc: ?
+ * @ioc_state: controller state { READY, OPERATIONAL, or RESET }
+ * @timeout: timeout in second
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32 ioc_state, int timeout)
+{
+	u32 count, cntdn;
+	u32 current_state;
+
+	count = 0;
+	cntdn = 1000 * timeout;
+	do {
+		current_state = mpt3sas_base_get_iocstate(ioc, 1);
+		if (current_state == ioc_state)
+			return 0;
+		if (count && current_state == MPI2_IOC_STATE_FAULT)
+			break;
+		if (count && current_state == MPI2_IOC_STATE_COREDUMP)
+			break;
+
+		usleep_range(1000, 1500);
+		count++;
+	} while (--cntdn);
+
+	return current_state;
+}
+
+/**
+ * _base_dump_reg_set -	This function will print hexdump of register set.
+ * @ioc: per adapter object
+ *
+ * Return: nothing.
+ */
+static inline void
+_base_dump_reg_set(struct MPT3SAS_ADAPTER *ioc)
+{
+	unsigned int i, sz = 256;
+	u32 __iomem *reg = (u32 __iomem *)ioc->chip;
+
+	ioc_info(ioc, "System Register set:\n");
+	for (i = 0; i < (sz / sizeof(u32)); i++)
+		pr_info("%08x: %08x\n", (i * 4), readl(&reg[i]));
+}
+
+/**
+ * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by
+ * a write to the doorbell)
+ * @ioc: per adapter object
+ * @timeout: timeout in seconds
+ *
+ * Return: 0 for success, non-zero for failure.
+ *
+ * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
+ */
+
+static int
+_base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout)
+{
+	u32 cntdn, count;
+	u32 int_status;
+
+	count = 0;
+	cntdn = 1000 * timeout;
+	do {
+		int_status = ioc->base_readl(&ioc->chip->HostInterruptStatus);
+		if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
+			dhsprintk(ioc,
+				  ioc_info(ioc, "%s: successful count(%d), timeout(%d)\n",
+					   __func__, count, timeout));
+			return 0;
+		}
+
+		usleep_range(1000, 1500);
+		count++;
+	} while (--cntdn);
+
+	ioc_err(ioc, "%s: failed due to timeout count(%d), int_status(%x)!\n",
+		__func__, count, int_status);
+	return -EFAULT;
+}
+
+static int
+_base_spin_on_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout)
+{
+	u32 cntdn, count;
+	u32 int_status;
+
+	count = 0;
+	cntdn = 2000 * timeout;
+	do {
+		int_status = ioc->base_readl(&ioc->chip->HostInterruptStatus);
+		if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
+			dhsprintk(ioc,
+				  ioc_info(ioc, "%s: successful count(%d), timeout(%d)\n",
+					   __func__, count, timeout));
+			return 0;
+		}
+
+		udelay(500);
+		count++;
+	} while (--cntdn);
+
+	ioc_err(ioc, "%s: failed due to timeout count(%d), int_status(%x)!\n",
+		__func__, count, int_status);
+	return -EFAULT;
+
+}
+
+/**
+ * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell.
+ * @ioc: per adapter object
+ * @timeout: timeout in second
+ *
+ * Return: 0 for success, non-zero for failure.
+ *
+ * Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to
+ * doorbell.
+ */
+static int
+_base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout)
+{
+	u32 cntdn, count;
+	u32 int_status;
+	u32 doorbell;
+
+	count = 0;
+	cntdn = 1000 * timeout;
+	do {
+		int_status = ioc->base_readl(&ioc->chip->HostInterruptStatus);
+		if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) {
+			dhsprintk(ioc,
+				  ioc_info(ioc, "%s: successful count(%d), timeout(%d)\n",
+					   __func__, count, timeout));
+			return 0;
+		} else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
+			doorbell = ioc->base_readl_ext_retry(&ioc->chip->Doorbell);
+			if ((doorbell & MPI2_IOC_STATE_MASK) ==
+			    MPI2_IOC_STATE_FAULT) {
+				mpt3sas_print_fault_code(ioc, doorbell);
+				return -EFAULT;
+			}
+			if ((doorbell & MPI2_IOC_STATE_MASK) ==
+			    MPI2_IOC_STATE_COREDUMP) {
+				mpt3sas_print_coredump_info(ioc, doorbell);
+				return -EFAULT;
+			}
+		} else if (int_status == 0xFFFFFFFF)
+			goto out;
+
+		usleep_range(1000, 1500);
+		count++;
+	} while (--cntdn);
+
+ out:
+	ioc_err(ioc, "%s: failed due to timeout count(%d), int_status(%x)!\n",
+		__func__, count, int_status);
+	return -EFAULT;
+}
+
+/**
+ * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use
+ * @ioc: per adapter object
+ * @timeout: timeout in second
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_wait_for_doorbell_not_used(struct MPT3SAS_ADAPTER *ioc, int timeout)
+{
+	u32 cntdn, count;
+	u32 doorbell_reg;
+
+	count = 0;
+	cntdn = 1000 * timeout;
+	do {
+		doorbell_reg = ioc->base_readl_ext_retry(&ioc->chip->Doorbell);
+		if (!(doorbell_reg & MPI2_DOORBELL_USED)) {
+			dhsprintk(ioc,
+				  ioc_info(ioc, "%s: successful count(%d), timeout(%d)\n",
+					   __func__, count, timeout));
+			return 0;
+		}
+
+		usleep_range(1000, 1500);
+		count++;
+	} while (--cntdn);
+
+	ioc_err(ioc, "%s: failed due to timeout count(%d), doorbell_reg(%x)!\n",
+		__func__, count, doorbell_reg);
+	return -EFAULT;
+}
+
+/**
+ * _base_send_ioc_reset - send doorbell reset
+ * @ioc: per adapter object
+ * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
+ * @timeout: timeout in second
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout)
+{
+	u32 ioc_state;
+	int r = 0;
+	unsigned long flags;
+
+	if (reset_type != MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET) {
+		ioc_err(ioc, "%s: unknown reset_type\n", __func__);
+		return -EFAULT;
+	}
+
+	if (!(ioc->facts.IOCCapabilities &
+	   MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY))
+		return -EFAULT;
+
+	ioc_info(ioc, "sending message unit reset !!\n");
+
+	writel(reset_type << MPI2_DOORBELL_FUNCTION_SHIFT,
+	    &ioc->chip->Doorbell);
+	if ((_base_wait_for_doorbell_ack(ioc, 15))) {
+		r = -EFAULT;
+		goto out;
+	}
+
+	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, timeout);
+	if (ioc_state) {
+		ioc_err(ioc, "%s: failed going to ready state (ioc_state=0x%x)\n",
+			__func__, ioc_state);
+		r = -EFAULT;
+		goto out;
+	}
+ out:
+	if (r != 0) {
+		ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+		spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+		/*
+		 * Wait for IOC state CoreDump to clear only during
+		 * HBA initialization & release time.
+		 */
+		if ((ioc_state & MPI2_IOC_STATE_MASK) ==
+		    MPI2_IOC_STATE_COREDUMP && (ioc->is_driver_loading == 1 ||
+		    ioc->fault_reset_work_q == NULL)) {
+			spin_unlock_irqrestore(
+			    &ioc->ioc_reset_in_progress_lock, flags);
+			mpt3sas_print_coredump_info(ioc, ioc_state);
+			mpt3sas_base_wait_for_coredump_completion(ioc,
+			    __func__);
+			spin_lock_irqsave(
+			    &ioc->ioc_reset_in_progress_lock, flags);
+		}
+		spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+	}
+	ioc_info(ioc, "message unit reset: %s\n",
+		 r == 0 ? "SUCCESS" : "FAILED");
+	return r;
+}
+
+/**
+ * mpt3sas_wait_for_ioc - IOC's operational state is checked here.
+ * @ioc: per adapter object
+ * @timeout: timeout in seconds
+ *
+ * Return: Waits up to timeout seconds for the IOC to
+ * become operational. Returns 0 if IOC is present
+ * and operational; otherwise returns %-EFAULT.
+ */
+
+int
+mpt3sas_wait_for_ioc(struct MPT3SAS_ADAPTER *ioc, int timeout)
+{
+	int wait_state_count = 0;
+	u32 ioc_state;
+
+	do {
+		ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+		if (ioc_state == MPI2_IOC_STATE_OPERATIONAL)
+			break;
+
+		/*
+		 * Watchdog thread will be started after IOC Initialization, so
+		 * no need to wait here for IOC state to become operational
+		 * when IOC Initialization is on. Instead the driver will
+		 * return ETIME status, so that calling function can issue
+		 * diag reset operation and retry the command.
+		 */
+		if (ioc->is_driver_loading)
+			return -ETIME;
+
+		ssleep(1);
+		ioc_info(ioc, "%s: waiting for operational state(count=%d)\n",
+				__func__, ++wait_state_count);
+	} while (--timeout);
+	if (!timeout) {
+		ioc_err(ioc, "%s: failed due to ioc not operational\n", __func__);
+		return -EFAULT;
+	}
+	if (wait_state_count)
+		ioc_info(ioc, "ioc is operational\n");
+	return 0;
+}
+
+/**
+ * _base_handshake_req_reply_wait - send request thru doorbell interface
+ * @ioc: per adapter object
+ * @request_bytes: request length
+ * @request: pointer having request payload
+ * @reply_bytes: reply length
+ * @reply: pointer to reply payload
+ * @timeout: timeout in second
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
+	u32 *request, int reply_bytes, u16 *reply, int timeout)
+{
+	MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply;
+	int i;
+	u8 failed;
+	__le32 *mfp;
+
+	/* make sure doorbell is not in use */
+	if ((ioc->base_readl_ext_retry(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) {
+		ioc_err(ioc, "doorbell is in use (line=%d)\n", __LINE__);
+		return -EFAULT;
+	}
+
+	/* clear pending doorbell interrupts from previous state changes */
+	if (ioc->base_readl(&ioc->chip->HostInterruptStatus) &
+	    MPI2_HIS_IOC2SYS_DB_STATUS)
+		writel(0, &ioc->chip->HostInterruptStatus);
+
+	/* send message to ioc */
+	writel(((MPI2_FUNCTION_HANDSHAKE<<MPI2_DOORBELL_FUNCTION_SHIFT) |
+	    ((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)),
+	    &ioc->chip->Doorbell);
+
+	if ((_base_spin_on_doorbell_int(ioc, 5))) {
+		ioc_err(ioc, "doorbell handshake int failed (line=%d)\n",
+			__LINE__);
+		return -EFAULT;
+	}
+	writel(0, &ioc->chip->HostInterruptStatus);
+
+	if ((_base_wait_for_doorbell_ack(ioc, 5))) {
+		ioc_err(ioc, "doorbell handshake ack failed (line=%d)\n",
+			__LINE__);
+		return -EFAULT;
+	}
+
+	/* send message 32-bits at a time */
+	for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) {
+		writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell);
+		if ((_base_wait_for_doorbell_ack(ioc, 5)))
+			failed = 1;
+	}
+
+	if (failed) {
+		ioc_err(ioc, "doorbell handshake sending request failed (line=%d)\n",
+			__LINE__);
+		return -EFAULT;
+	}
+
+	/* now wait for the reply */
+	if ((_base_wait_for_doorbell_int(ioc, timeout))) {
+		ioc_err(ioc, "doorbell handshake int failed (line=%d)\n",
+			__LINE__);
+		return -EFAULT;
+	}
+
+	/* read the first two 16-bits, it gives the total length of the reply */
+	reply[0] = le16_to_cpu(ioc->base_readl_ext_retry(&ioc->chip->Doorbell)
+	    & MPI2_DOORBELL_DATA_MASK);
+	writel(0, &ioc->chip->HostInterruptStatus);
+	if ((_base_wait_for_doorbell_int(ioc, 5))) {
+		ioc_err(ioc, "doorbell handshake int failed (line=%d)\n",
+			__LINE__);
+		return -EFAULT;
+	}
+	reply[1] = le16_to_cpu(ioc->base_readl_ext_retry(&ioc->chip->Doorbell)
+	    & MPI2_DOORBELL_DATA_MASK);
+	writel(0, &ioc->chip->HostInterruptStatus);
+
+	for (i = 2; i < default_reply->MsgLength * 2; i++)  {
+		if ((_base_wait_for_doorbell_int(ioc, 5))) {
+			ioc_err(ioc, "doorbell handshake int failed (line=%d)\n",
+				__LINE__);
+			return -EFAULT;
+		}
+		if (i >=  reply_bytes/2) /* overflow case */
+			ioc->base_readl_ext_retry(&ioc->chip->Doorbell);
+		else
+			reply[i] = le16_to_cpu(
+			    ioc->base_readl_ext_retry(&ioc->chip->Doorbell)
+			    & MPI2_DOORBELL_DATA_MASK);
+		writel(0, &ioc->chip->HostInterruptStatus);
+	}
+
+	_base_wait_for_doorbell_int(ioc, 5);
+	if (_base_wait_for_doorbell_not_used(ioc, 5) != 0) {
+		dhsprintk(ioc,
+			  ioc_info(ioc, "doorbell is in use (line=%d)\n",
+				   __LINE__));
+	}
+	writel(0, &ioc->chip->HostInterruptStatus);
+
+	if (ioc->logging_level & MPT_DEBUG_INIT) {
+		mfp = (__le32 *)reply;
+		pr_info("\toffset:data\n");
+		for (i = 0; i < reply_bytes/4; i++)
+			ioc_info(ioc, "\t[0x%02x]:%08x\n", i*4,
+			    le32_to_cpu(mfp[i]));
+	}
+	return 0;
+}
+
+/**
+ * mpt3sas_base_sas_iounit_control - send sas iounit control to FW
+ * @ioc: per adapter object
+ * @mpi_reply: the reply payload from FW
+ * @mpi_request: the request payload sent to FW
+ *
+ * The SAS IO Unit Control Request message allows the host to perform low-level
+ * operations, such as resets on the PHYs of the IO Unit, also allows the host
+ * to obtain the IOC assigned device handles for a device if it has other
+ * identifying information about the device, in addition allows the host to
+ * remove IOC resources associated with the device.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2SasIoUnitControlReply_t *mpi_reply,
+	Mpi2SasIoUnitControlRequest_t *mpi_request)
+{
+	u16 smid;
+	u8 issue_reset = 0;
+	int rc;
+	void *request;
+
+	dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
+
+	mutex_lock(&ioc->base_cmds.mutex);
+
+	if (ioc->base_cmds.status != MPT3_CMD_NOT_USED) {
+		ioc_err(ioc, "%s: base_cmd in use\n", __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	rc = mpt3sas_wait_for_ioc(ioc, IOC_OPERATIONAL_WAIT_COUNT);
+	if (rc)
+		goto out;
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
+	if (!smid) {
+		ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	rc = 0;
+	ioc->base_cmds.status = MPT3_CMD_PENDING;
+	request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->base_cmds.smid = smid;
+	memcpy(request, mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t));
+	if (mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
+	    mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET)
+		ioc->ioc_link_reset_in_progress = 1;
+	init_completion(&ioc->base_cmds.done);
+	ioc->put_smid_default(ioc, smid);
+	wait_for_completion_timeout(&ioc->base_cmds.done,
+	    msecs_to_jiffies(10000));
+	if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
+	    mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) &&
+	    ioc->ioc_link_reset_in_progress)
+		ioc->ioc_link_reset_in_progress = 0;
+	if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
+		mpt3sas_check_cmd_timeout(ioc, ioc->base_cmds.status,
+		    mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t)/4,
+		    issue_reset);
+		goto issue_host_reset;
+	}
+	if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID)
+		memcpy(mpi_reply, ioc->base_cmds.reply,
+		    sizeof(Mpi2SasIoUnitControlReply_t));
+	else
+		memset(mpi_reply, 0, sizeof(Mpi2SasIoUnitControlReply_t));
+	ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+	goto out;
+
+ issue_host_reset:
+	if (issue_reset)
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+	ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+	rc = -EFAULT;
+ out:
+	mutex_unlock(&ioc->base_cmds.mutex);
+	return rc;
+}
+
+/**
+ * mpt3sas_base_scsi_enclosure_processor - sending request to sep device
+ * @ioc: per adapter object
+ * @mpi_reply: the reply payload from FW
+ * @mpi_request: the request payload sent to FW
+ *
+ * The SCSI Enclosure Processor request message causes the IOC to
+ * communicate with SES devices to control LED status signals.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request)
+{
+	u16 smid;
+	u8 issue_reset = 0;
+	int rc;
+	void *request;
+
+	dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
+
+	mutex_lock(&ioc->base_cmds.mutex);
+
+	if (ioc->base_cmds.status != MPT3_CMD_NOT_USED) {
+		ioc_err(ioc, "%s: base_cmd in use\n", __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	rc = mpt3sas_wait_for_ioc(ioc, IOC_OPERATIONAL_WAIT_COUNT);
+	if (rc)
+		goto out;
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
+	if (!smid) {
+		ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	rc = 0;
+	ioc->base_cmds.status = MPT3_CMD_PENDING;
+	request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->base_cmds.smid = smid;
+	memset(request, 0, ioc->request_sz);
+	memcpy(request, mpi_request, sizeof(Mpi2SepReply_t));
+	init_completion(&ioc->base_cmds.done);
+	ioc->put_smid_default(ioc, smid);
+	wait_for_completion_timeout(&ioc->base_cmds.done,
+	    msecs_to_jiffies(10000));
+	if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
+		mpt3sas_check_cmd_timeout(ioc,
+		    ioc->base_cmds.status, mpi_request,
+		    sizeof(Mpi2SepRequest_t)/4, issue_reset);
+		goto issue_host_reset;
+	}
+	if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID)
+		memcpy(mpi_reply, ioc->base_cmds.reply,
+		    sizeof(Mpi2SepReply_t));
+	else
+		memset(mpi_reply, 0, sizeof(Mpi2SepReply_t));
+	ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+	goto out;
+
+ issue_host_reset:
+	if (issue_reset)
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+	ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+	rc = -EFAULT;
+ out:
+	mutex_unlock(&ioc->base_cmds.mutex);
+	return rc;
+}
+
+/**
+ * _base_get_port_facts - obtain port facts reply and save in ioc
+ * @ioc: per adapter object
+ * @port: ?
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_get_port_facts(struct MPT3SAS_ADAPTER *ioc, int port)
+{
+	Mpi2PortFactsRequest_t mpi_request;
+	Mpi2PortFactsReply_t mpi_reply;
+	struct mpt3sas_port_facts *pfacts;
+	int mpi_reply_sz, mpi_request_sz, r;
+
+	dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
+
+	mpi_reply_sz = sizeof(Mpi2PortFactsReply_t);
+	mpi_request_sz = sizeof(Mpi2PortFactsRequest_t);
+	memset(&mpi_request, 0, mpi_request_sz);
+	mpi_request.Function = MPI2_FUNCTION_PORT_FACTS;
+	mpi_request.PortNumber = port;
+	r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
+	    (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5);
+
+	if (r != 0) {
+		ioc_err(ioc, "%s: handshake failed (r=%d)\n", __func__, r);
+		return r;
+	}
+
+	pfacts = &ioc->pfacts[port];
+	memset(pfacts, 0, sizeof(struct mpt3sas_port_facts));
+	pfacts->PortNumber = mpi_reply.PortNumber;
+	pfacts->VP_ID = mpi_reply.VP_ID;
+	pfacts->VF_ID = mpi_reply.VF_ID;
+	pfacts->MaxPostedCmdBuffers =
+	    le16_to_cpu(mpi_reply.MaxPostedCmdBuffers);
+
+	return 0;
+}
+
+/**
+ * _base_wait_for_iocstate - Wait until the card is in READY or OPERATIONAL
+ * @ioc: per adapter object
+ * @timeout:
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout)
+{
+	u32 ioc_state;
+	int rc;
+
+	dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
+
+	if (ioc->pci_error_recovery) {
+		dfailprintk(ioc,
+			    ioc_info(ioc, "%s: host in pci error recovery\n",
+				     __func__));
+		return -EFAULT;
+	}
+
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+	dhsprintk(ioc,
+		  ioc_info(ioc, "%s: ioc_state(0x%08x)\n",
+			   __func__, ioc_state));
+
+	if (((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY) ||
+	    (ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
+		return 0;
+
+	if (ioc_state & MPI2_DOORBELL_USED) {
+		dhsprintk(ioc, ioc_info(ioc, "unexpected doorbell active!\n"));
+		goto issue_diag_reset;
+	}
+
+	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
+		mpt3sas_print_fault_code(ioc, ioc_state &
+		    MPI2_DOORBELL_DATA_MASK);
+		goto issue_diag_reset;
+	} else if ((ioc_state & MPI2_IOC_STATE_MASK) ==
+	    MPI2_IOC_STATE_COREDUMP) {
+		ioc_info(ioc,
+		    "%s: Skipping the diag reset here. (ioc_state=0x%x)\n",
+		    __func__, ioc_state);
+		return -EFAULT;
+	}
+
+	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, timeout);
+	if (ioc_state) {
+		dfailprintk(ioc,
+			    ioc_info(ioc, "%s: failed going to ready state (ioc_state=0x%x)\n",
+				     __func__, ioc_state));
+		return -EFAULT;
+	}
+
+ issue_diag_reset:
+	rc = _base_diag_reset(ioc);
+	return rc;
+}
+
+/**
+ * _base_get_ioc_facts - obtain ioc facts reply and save in ioc
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2IOCFactsRequest_t mpi_request;
+	Mpi2IOCFactsReply_t mpi_reply;
+	struct mpt3sas_facts *facts;
+	int mpi_reply_sz, mpi_request_sz, r;
+
+	dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
+
+	r = _base_wait_for_iocstate(ioc, 10);
+	if (r) {
+		dfailprintk(ioc,
+			    ioc_info(ioc, "%s: failed getting to correct state\n",
+				     __func__));
+		return r;
+	}
+	mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t);
+	mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t);
+	memset(&mpi_request, 0, mpi_request_sz);
+	mpi_request.Function = MPI2_FUNCTION_IOC_FACTS;
+	r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
+	    (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5);
+
+	if (r != 0) {
+		ioc_err(ioc, "%s: handshake failed (r=%d)\n", __func__, r);
+		return r;
+	}
+
+	facts = &ioc->facts;
+	memset(facts, 0, sizeof(struct mpt3sas_facts));
+	facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion);
+	facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion);
+	facts->VP_ID = mpi_reply.VP_ID;
+	facts->VF_ID = mpi_reply.VF_ID;
+	facts->IOCExceptions = le16_to_cpu(mpi_reply.IOCExceptions);
+	facts->MaxChainDepth = mpi_reply.MaxChainDepth;
+	facts->WhoInit = mpi_reply.WhoInit;
+	facts->NumberOfPorts = mpi_reply.NumberOfPorts;
+	facts->MaxMSIxVectors = mpi_reply.MaxMSIxVectors;
+	if (ioc->msix_enable && (facts->MaxMSIxVectors <=
+	    MAX_COMBINED_MSIX_VECTORS(ioc->is_gen35_ioc)))
+		ioc->combined_reply_queue = 0;
+	facts->RequestCredit = le16_to_cpu(mpi_reply.RequestCredit);
+	facts->MaxReplyDescriptorPostQueueDepth =
+	    le16_to_cpu(mpi_reply.MaxReplyDescriptorPostQueueDepth);
+	facts->ProductID = le16_to_cpu(mpi_reply.ProductID);
+	facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities);
+	if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID))
+		ioc->ir_firmware = 1;
+	if ((facts->IOCCapabilities &
+	      MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE) && (!reset_devices))
+		ioc->rdpq_array_capable = 1;
+	if ((facts->IOCCapabilities & MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ)
+	    && ioc->is_aero_ioc)
+		ioc->atomic_desc_capable = 1;
+	facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word);
+	facts->IOCRequestFrameSize =
+	    le16_to_cpu(mpi_reply.IOCRequestFrameSize);
+	if (ioc->hba_mpi_version_belonged != MPI2_VERSION) {
+		facts->IOCMaxChainSegmentSize =
+			le16_to_cpu(mpi_reply.IOCMaxChainSegmentSize);
+	}
+	facts->MaxInitiators = le16_to_cpu(mpi_reply.MaxInitiators);
+	facts->MaxTargets = le16_to_cpu(mpi_reply.MaxTargets);
+	ioc->shost->max_id = -1;
+	facts->MaxSasExpanders = le16_to_cpu(mpi_reply.MaxSasExpanders);
+	facts->MaxEnclosures = le16_to_cpu(mpi_reply.MaxEnclosures);
+	facts->ProtocolFlags = le16_to_cpu(mpi_reply.ProtocolFlags);
+	facts->HighPriorityCredit =
+	    le16_to_cpu(mpi_reply.HighPriorityCredit);
+	facts->ReplyFrameSize = mpi_reply.ReplyFrameSize;
+	facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle);
+	facts->CurrentHostPageSize = mpi_reply.CurrentHostPageSize;
+
+	/*
+	 * Get the Page Size from IOC Facts. If it's 0, default to 4k.
+	 */
+	ioc->page_size = 1 << facts->CurrentHostPageSize;
+	if (ioc->page_size == 1) {
+		ioc_info(ioc, "CurrentHostPageSize is 0: Setting default host page size to 4k\n");
+		ioc->page_size = 1 << MPT3SAS_HOST_PAGE_SIZE_4K;
+	}
+	dinitprintk(ioc,
+		    ioc_info(ioc, "CurrentHostPageSize(%d)\n",
+			     facts->CurrentHostPageSize));
+
+	dinitprintk(ioc,
+		    ioc_info(ioc, "hba queue depth(%d), max chains per io(%d)\n",
+			     facts->RequestCredit, facts->MaxChainDepth));
+	dinitprintk(ioc,
+		    ioc_info(ioc, "request frame size(%d), reply frame size(%d)\n",
+			     facts->IOCRequestFrameSize * 4,
+			     facts->ReplyFrameSize * 4));
+	return 0;
+}
+
+/**
+ * _base_send_ioc_init - send ioc_init to firmware
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2IOCInitRequest_t mpi_request;
+	Mpi2IOCInitReply_t mpi_reply;
+	int i, r = 0;
+	ktime_t current_time;
+	u16 ioc_status;
+	u32 reply_post_free_array_sz = 0;
+
+	dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
+
+	memset(&mpi_request, 0, sizeof(Mpi2IOCInitRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_IOC_INIT;
+	mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER;
+	mpi_request.VF_ID = 0; /* TODO */
+	mpi_request.VP_ID = 0;
+	mpi_request.MsgVersion = cpu_to_le16(ioc->hba_mpi_version_belonged);
+	mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION);
+	mpi_request.HostPageSize = MPT3SAS_HOST_PAGE_SIZE_4K;
+
+	if (_base_is_controller_msix_enabled(ioc))
+		mpi_request.HostMSIxVectors = ioc->reply_queue_count;
+	mpi_request.SystemRequestFrameSize = cpu_to_le16(ioc->request_sz/4);
+	mpi_request.ReplyDescriptorPostQueueDepth =
+	    cpu_to_le16(ioc->reply_post_queue_depth);
+	mpi_request.ReplyFreeQueueDepth =
+	    cpu_to_le16(ioc->reply_free_queue_depth);
+
+	mpi_request.SenseBufferAddressHigh =
+	    cpu_to_le32((u64)ioc->sense_dma >> 32);
+	mpi_request.SystemReplyAddressHigh =
+	    cpu_to_le32((u64)ioc->reply_dma >> 32);
+	mpi_request.SystemRequestFrameBaseAddress =
+	    cpu_to_le64((u64)ioc->request_dma);
+	mpi_request.ReplyFreeQueueAddress =
+	    cpu_to_le64((u64)ioc->reply_free_dma);
+
+	if (ioc->rdpq_array_enable) {
+		reply_post_free_array_sz = ioc->reply_queue_count *
+		    sizeof(Mpi2IOCInitRDPQArrayEntry);
+		memset(ioc->reply_post_free_array, 0, reply_post_free_array_sz);
+		for (i = 0; i < ioc->reply_queue_count; i++)
+			ioc->reply_post_free_array[i].RDPQBaseAddress =
+			    cpu_to_le64(
+				(u64)ioc->reply_post[i].reply_post_free_dma);
+		mpi_request.MsgFlags = MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE;
+		mpi_request.ReplyDescriptorPostQueueAddress =
+		    cpu_to_le64((u64)ioc->reply_post_free_array_dma);
+	} else {
+		mpi_request.ReplyDescriptorPostQueueAddress =
+		    cpu_to_le64((u64)ioc->reply_post[0].reply_post_free_dma);
+	}
+
+	/*
+	 * Set the flag to enable CoreDump state feature in IOC firmware.
+	 */
+	mpi_request.ConfigurationFlags |=
+	    cpu_to_le16(MPI26_IOCINIT_CFGFLAGS_COREDUMP_ENABLE);
+
+	/* This time stamp specifies number of milliseconds
+	 * since epoch ~ midnight January 1, 1970.
+	 */
+	current_time = ktime_get_real();
+	mpi_request.TimeStamp = cpu_to_le64(ktime_to_ms(current_time));
+
+	if (ioc->logging_level & MPT_DEBUG_INIT) {
+		__le32 *mfp;
+		int i;
+
+		mfp = (__le32 *)&mpi_request;
+		ioc_info(ioc, "\toffset:data\n");
+		for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++)
+			ioc_info(ioc, "\t[0x%02x]:%08x\n", i*4,
+			    le32_to_cpu(mfp[i]));
+	}
+
+	r = _base_handshake_req_reply_wait(ioc,
+	    sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request,
+	    sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 30);
+
+	if (r != 0) {
+		ioc_err(ioc, "%s: handshake failed (r=%d)\n", __func__, r);
+		return r;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS ||
+	    mpi_reply.IOCLogInfo) {
+		ioc_err(ioc, "%s: failed\n", __func__);
+		r = -EIO;
+	}
+
+	/* Reset TimeSync Counter*/
+	ioc->timestamp_update_count = 0;
+	return r;
+}
+
+/**
+ * mpt3sas_port_enable_done - command completion routine for port enable
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *          0 means the mf is freed from this function.
+ */
+u8
+mpt3sas_port_enable_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply)
+{
+	MPI2DefaultReply_t *mpi_reply;
+	u16 ioc_status;
+
+	if (ioc->port_enable_cmds.status == MPT3_CMD_NOT_USED)
+		return 1;
+
+	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	if (!mpi_reply)
+		return 1;
+
+	if (mpi_reply->Function != MPI2_FUNCTION_PORT_ENABLE)
+		return 1;
+
+	ioc->port_enable_cmds.status &= ~MPT3_CMD_PENDING;
+	ioc->port_enable_cmds.status |= MPT3_CMD_COMPLETE;
+	ioc->port_enable_cmds.status |= MPT3_CMD_REPLY_VALID;
+	memcpy(ioc->port_enable_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
+	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+		ioc->port_enable_failed = 1;
+
+	if (ioc->port_enable_cmds.status & MPT3_CMD_COMPLETE_ASYNC) {
+		ioc->port_enable_cmds.status &= ~MPT3_CMD_COMPLETE_ASYNC;
+		if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+			mpt3sas_port_enable_complete(ioc);
+			return 1;
+		} else {
+			ioc->start_scan_failed = ioc_status;
+			ioc->start_scan = 0;
+			return 1;
+		}
+	}
+	complete(&ioc->port_enable_cmds.done);
+	return 1;
+}
+
+/**
+ * _base_send_port_enable - send port_enable(discovery stuff) to firmware
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_send_port_enable(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2PortEnableRequest_t *mpi_request;
+	Mpi2PortEnableReply_t *mpi_reply;
+	int r = 0;
+	u16 smid;
+	u16 ioc_status;
+
+	ioc_info(ioc, "sending port enable !!\n");
+
+	if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) {
+		ioc_err(ioc, "%s: internal command already in use\n", __func__);
+		return -EAGAIN;
+	}
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
+	if (!smid) {
+		ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
+		return -EAGAIN;
+	}
+
+	ioc->port_enable_cmds.status = MPT3_CMD_PENDING;
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->port_enable_cmds.smid = smid;
+	memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
+
+	init_completion(&ioc->port_enable_cmds.done);
+	ioc->put_smid_default(ioc, smid);
+	wait_for_completion_timeout(&ioc->port_enable_cmds.done, 300*HZ);
+	if (!(ioc->port_enable_cmds.status & MPT3_CMD_COMPLETE)) {
+		ioc_err(ioc, "%s: timeout\n", __func__);
+		_debug_dump_mf(mpi_request,
+		    sizeof(Mpi2PortEnableRequest_t)/4);
+		if (ioc->port_enable_cmds.status & MPT3_CMD_RESET)
+			r = -EFAULT;
+		else
+			r = -ETIME;
+		goto out;
+	}
+
+	mpi_reply = ioc->port_enable_cmds.reply;
+	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		ioc_err(ioc, "%s: failed with (ioc_status=0x%08x)\n",
+			__func__, ioc_status);
+		r = -EFAULT;
+		goto out;
+	}
+
+ out:
+	ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED;
+	ioc_info(ioc, "port enable: %s\n", r == 0 ? "SUCCESS" : "FAILED");
+	return r;
+}
+
+/**
+ * mpt3sas_port_enable - initiate firmware discovery (don't wait for reply)
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2PortEnableRequest_t *mpi_request;
+	u16 smid;
+
+	ioc_info(ioc, "sending port enable !!\n");
+
+	if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) {
+		ioc_err(ioc, "%s: internal command already in use\n", __func__);
+		return -EAGAIN;
+	}
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
+	if (!smid) {
+		ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
+		return -EAGAIN;
+	}
+	ioc->drv_internal_flags |= MPT_DRV_INTERNAL_FIRST_PE_ISSUED;
+	ioc->port_enable_cmds.status = MPT3_CMD_PENDING;
+	ioc->port_enable_cmds.status |= MPT3_CMD_COMPLETE_ASYNC;
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->port_enable_cmds.smid = smid;
+	memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
+
+	ioc->put_smid_default(ioc, smid);
+	return 0;
+}
+
+/**
+ * _base_determine_wait_on_discovery - desposition
+ * @ioc: per adapter object
+ *
+ * Decide whether to wait on discovery to complete. Used to either
+ * locate boot device, or report volumes ahead of physical devices.
+ *
+ * Return: 1 for wait, 0 for don't wait.
+ */
+static int
+_base_determine_wait_on_discovery(struct MPT3SAS_ADAPTER *ioc)
+{
+	/* We wait for discovery to complete if IR firmware is loaded.
+	 * The sas topology events arrive before PD events, so we need time to
+	 * turn on the bit in ioc->pd_handles to indicate PD
+	 * Also, it maybe required to report Volumes ahead of physical
+	 * devices when MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING is set.
+	 */
+	if (ioc->ir_firmware)
+		return 1;
+
+	/* if no Bios, then we don't need to wait */
+	if (!ioc->bios_pg3.BiosVersion)
+		return 0;
+
+	/* Bios is present, then we drop down here.
+	 *
+	 * If there any entries in the Bios Page 2, then we wait
+	 * for discovery to complete.
+	 */
+
+	/* Current Boot Device */
+	if ((ioc->bios_pg2.CurrentBootDeviceForm &
+	    MPI2_BIOSPAGE2_FORM_MASK) ==
+	    MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
+	/* Request Boot Device */
+	   (ioc->bios_pg2.ReqBootDeviceForm &
+	    MPI2_BIOSPAGE2_FORM_MASK) ==
+	    MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
+	/* Alternate Request Boot Device */
+	   (ioc->bios_pg2.ReqAltBootDeviceForm &
+	    MPI2_BIOSPAGE2_FORM_MASK) ==
+	    MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED)
+		return 0;
+
+	return 1;
+}
+
+/**
+ * _base_unmask_events - turn on notification for this event
+ * @ioc: per adapter object
+ * @event: firmware event
+ *
+ * The mask is stored in ioc->event_masks.
+ */
+static void
+_base_unmask_events(struct MPT3SAS_ADAPTER *ioc, u16 event)
+{
+	u32 desired_event;
+
+	if (event >= 128)
+		return;
+
+	desired_event = (1 << (event % 32));
+
+	if (event < 32)
+		ioc->event_masks[0] &= ~desired_event;
+	else if (event < 64)
+		ioc->event_masks[1] &= ~desired_event;
+	else if (event < 96)
+		ioc->event_masks[2] &= ~desired_event;
+	else if (event < 128)
+		ioc->event_masks[3] &= ~desired_event;
+}
+
+/**
+ * _base_event_notification - send event notification
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_event_notification(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2EventNotificationRequest_t *mpi_request;
+	u16 smid;
+	int r = 0;
+	int i, issue_diag_reset = 0;
+
+	dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
+
+	if (ioc->base_cmds.status & MPT3_CMD_PENDING) {
+		ioc_err(ioc, "%s: internal command already in use\n", __func__);
+		return -EAGAIN;
+	}
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
+	if (!smid) {
+		ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
+		return -EAGAIN;
+	}
+	ioc->base_cmds.status = MPT3_CMD_PENDING;
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->base_cmds.smid = smid;
+	memset(mpi_request, 0, sizeof(Mpi2EventNotificationRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
+	for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
+		mpi_request->EventMasks[i] =
+		    cpu_to_le32(ioc->event_masks[i]);
+	init_completion(&ioc->base_cmds.done);
+	ioc->put_smid_default(ioc, smid);
+	wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ);
+	if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) {
+		ioc_err(ioc, "%s: timeout\n", __func__);
+		_debug_dump_mf(mpi_request,
+		    sizeof(Mpi2EventNotificationRequest_t)/4);
+		if (ioc->base_cmds.status & MPT3_CMD_RESET)
+			r = -EFAULT;
+		else
+			issue_diag_reset = 1;
+
+	} else
+		dinitprintk(ioc, ioc_info(ioc, "%s: complete\n", __func__));
+	ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+
+	if (issue_diag_reset) {
+		if (ioc->drv_internal_flags & MPT_DRV_INTERNAL_FIRST_PE_ISSUED)
+			return -EFAULT;
+		if (mpt3sas_base_check_for_fault_and_issue_reset(ioc))
+			return -EFAULT;
+		r = -EAGAIN;
+	}
+	return r;
+}
+
+/**
+ * mpt3sas_base_validate_event_type - validating event types
+ * @ioc: per adapter object
+ * @event_type: firmware event
+ *
+ * This will turn on firmware event notification when application
+ * ask for that event. We don't mask events that are already enabled.
+ */
+void
+mpt3sas_base_validate_event_type(struct MPT3SAS_ADAPTER *ioc, u32 *event_type)
+{
+	int i, j;
+	u32 event_mask, desired_event;
+	u8 send_update_to_fw;
+
+	for (i = 0, send_update_to_fw = 0; i <
+	    MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) {
+		event_mask = ~event_type[i];
+		desired_event = 1;
+		for (j = 0; j < 32; j++) {
+			if (!(event_mask & desired_event) &&
+			    (ioc->event_masks[i] & desired_event)) {
+				ioc->event_masks[i] &= ~desired_event;
+				send_update_to_fw = 1;
+			}
+			desired_event = (desired_event << 1);
+		}
+	}
+
+	if (!send_update_to_fw)
+		return;
+
+	mutex_lock(&ioc->base_cmds.mutex);
+	_base_event_notification(ioc);
+	mutex_unlock(&ioc->base_cmds.mutex);
+}
+
+/**
+ * _base_diag_reset - the "big hammer" start of day reset
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_diag_reset(struct MPT3SAS_ADAPTER *ioc)
+{
+	u32 host_diagnostic;
+	u32 ioc_state;
+	u32 count;
+	u32 hcb_size;
+
+	ioc_info(ioc, "sending diag reset !!\n");
+
+	pci_cfg_access_lock(ioc->pdev);
+
+	drsprintk(ioc, ioc_info(ioc, "clear interrupts\n"));
+
+	count = 0;
+	do {
+		/* Write magic sequence to WriteSequence register
+		 * Loop until in diagnostic mode
+		 */
+		drsprintk(ioc, ioc_info(ioc, "write magic sequence\n"));
+		writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
+		writel(MPI2_WRSEQ_1ST_KEY_VALUE, &ioc->chip->WriteSequence);
+		writel(MPI2_WRSEQ_2ND_KEY_VALUE, &ioc->chip->WriteSequence);
+		writel(MPI2_WRSEQ_3RD_KEY_VALUE, &ioc->chip->WriteSequence);
+		writel(MPI2_WRSEQ_4TH_KEY_VALUE, &ioc->chip->WriteSequence);
+		writel(MPI2_WRSEQ_5TH_KEY_VALUE, &ioc->chip->WriteSequence);
+		writel(MPI2_WRSEQ_6TH_KEY_VALUE, &ioc->chip->WriteSequence);
+
+		/* wait 100 msec */
+		msleep(100);
+
+		if (count++ > 20) {
+			ioc_info(ioc,
+			    "Stop writing magic sequence after 20 retries\n");
+			_base_dump_reg_set(ioc);
+			goto out;
+		}
+
+		host_diagnostic = ioc->base_readl_ext_retry(&ioc->chip->HostDiagnostic);
+		drsprintk(ioc,
+			  ioc_info(ioc, "wrote magic sequence: count(%d), host_diagnostic(0x%08x)\n",
+				   count, host_diagnostic));
+
+	} while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0);
+
+	hcb_size = ioc->base_readl(&ioc->chip->HCBSize);
+
+	drsprintk(ioc, ioc_info(ioc, "diag reset: issued\n"));
+	writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER,
+	     &ioc->chip->HostDiagnostic);
+
+	/*This delay allows the chip PCIe hardware time to finish reset tasks*/
+	msleep(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
+
+	/* Approximately 300 second max wait */
+	for (count = 0; count < (300000000 /
+		MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) {
+
+		host_diagnostic = ioc->base_readl_ext_retry(&ioc->chip->HostDiagnostic);
+
+		if (host_diagnostic == 0xFFFFFFFF) {
+			ioc_info(ioc,
+			    "Invalid host diagnostic register value\n");
+			_base_dump_reg_set(ioc);
+			goto out;
+		}
+		if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER))
+			break;
+
+		msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC / 1000);
+	}
+
+	if (host_diagnostic & MPI2_DIAG_HCB_MODE) {
+
+		drsprintk(ioc,
+			  ioc_info(ioc, "restart the adapter assuming the HCB Address points to good F/W\n"));
+		host_diagnostic &= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK;
+		host_diagnostic |= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW;
+		writel(host_diagnostic, &ioc->chip->HostDiagnostic);
+
+		drsprintk(ioc, ioc_info(ioc, "re-enable the HCDW\n"));
+		writel(hcb_size | MPI2_HCB_SIZE_HCB_ENABLE,
+		    &ioc->chip->HCBSize);
+	}
+
+	drsprintk(ioc, ioc_info(ioc, "restart the adapter\n"));
+	writel(host_diagnostic & ~MPI2_DIAG_HOLD_IOC_RESET,
+	    &ioc->chip->HostDiagnostic);
+
+	drsprintk(ioc,
+		  ioc_info(ioc, "disable writes to the diagnostic register\n"));
+	writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
+
+	drsprintk(ioc, ioc_info(ioc, "Wait for FW to go to the READY state\n"));
+	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20);
+	if (ioc_state) {
+		ioc_err(ioc, "%s: failed going to ready state (ioc_state=0x%x)\n",
+			__func__, ioc_state);
+		_base_dump_reg_set(ioc);
+		goto out;
+	}
+
+	pci_cfg_access_unlock(ioc->pdev);
+	ioc_info(ioc, "diag reset: SUCCESS\n");
+	return 0;
+
+ out:
+	pci_cfg_access_unlock(ioc->pdev);
+	ioc_err(ioc, "diag reset: FAILED\n");
+	return -EFAULT;
+}
+
+/**
+ * mpt3sas_base_make_ioc_ready - put controller in READY state
+ * @ioc: per adapter object
+ * @type: FORCE_BIG_HAMMER or SOFT_RESET
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, enum reset_type type)
+{
+	u32 ioc_state;
+	int rc;
+	int count;
+
+	dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
+
+	if (ioc->pci_error_recovery)
+		return 0;
+
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+	dhsprintk(ioc,
+		  ioc_info(ioc, "%s: ioc_state(0x%08x)\n",
+			   __func__, ioc_state));
+
+	/* if in RESET state, it should move to READY state shortly */
+	count = 0;
+	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_RESET) {
+		while ((ioc_state & MPI2_IOC_STATE_MASK) !=
+		    MPI2_IOC_STATE_READY) {
+			if (count++ == 10) {
+				ioc_err(ioc, "%s: failed going to ready state (ioc_state=0x%x)\n",
+					__func__, ioc_state);
+				return -EFAULT;
+			}
+			ssleep(1);
+			ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+		}
+	}
+
+	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY)
+		return 0;
+
+	if (ioc_state & MPI2_DOORBELL_USED) {
+		ioc_info(ioc, "unexpected doorbell active!\n");
+		goto issue_diag_reset;
+	}
+
+	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
+		mpt3sas_print_fault_code(ioc, ioc_state &
+		    MPI2_DOORBELL_DATA_MASK);
+		goto issue_diag_reset;
+	}
+
+	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_COREDUMP) {
+		/*
+		 * if host reset is invoked while watch dog thread is waiting
+		 * for IOC state to be changed to Fault state then driver has
+		 * to wait here for CoreDump state to clear otherwise reset
+		 * will be issued to the FW and FW move the IOC state to
+		 * reset state without copying the FW logs to coredump region.
+		 */
+		if (ioc->ioc_coredump_loop != MPT3SAS_COREDUMP_LOOP_DONE) {
+			mpt3sas_print_coredump_info(ioc, ioc_state &
+			    MPI2_DOORBELL_DATA_MASK);
+			mpt3sas_base_wait_for_coredump_completion(ioc,
+			    __func__);
+		}
+		goto issue_diag_reset;
+	}
+
+	if (type == FORCE_BIG_HAMMER)
+		goto issue_diag_reset;
+
+	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
+		if (!(_base_send_ioc_reset(ioc,
+		    MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15))) {
+			return 0;
+	}
+
+ issue_diag_reset:
+	rc = _base_diag_reset(ioc);
+	return rc;
+}
+
+/**
+ * _base_make_ioc_operational - put controller in OPERATIONAL state
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc)
+{
+	int r, i, index, rc;
+	unsigned long	flags;
+	u32 reply_address;
+	u16 smid;
+	struct _tr_list *delayed_tr, *delayed_tr_next;
+	struct _sc_list *delayed_sc, *delayed_sc_next;
+	struct _event_ack_list *delayed_event_ack, *delayed_event_ack_next;
+	u8 hide_flag;
+	struct adapter_reply_queue *reply_q;
+	Mpi2ReplyDescriptorsUnion_t *reply_post_free_contig;
+
+	dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
+
+	/* clean the delayed target reset list */
+	list_for_each_entry_safe(delayed_tr, delayed_tr_next,
+	    &ioc->delayed_tr_list, list) {
+		list_del(&delayed_tr->list);
+		kfree(delayed_tr);
+	}
+
+
+	list_for_each_entry_safe(delayed_tr, delayed_tr_next,
+	    &ioc->delayed_tr_volume_list, list) {
+		list_del(&delayed_tr->list);
+		kfree(delayed_tr);
+	}
+
+	list_for_each_entry_safe(delayed_sc, delayed_sc_next,
+	    &ioc->delayed_sc_list, list) {
+		list_del(&delayed_sc->list);
+		kfree(delayed_sc);
+	}
+
+	list_for_each_entry_safe(delayed_event_ack, delayed_event_ack_next,
+	    &ioc->delayed_event_ack_list, list) {
+		list_del(&delayed_event_ack->list);
+		kfree(delayed_event_ack);
+	}
+
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+
+	/* hi-priority queue */
+	INIT_LIST_HEAD(&ioc->hpr_free_list);
+	smid = ioc->hi_priority_smid;
+	for (i = 0; i < ioc->hi_priority_depth; i++, smid++) {
+		ioc->hpr_lookup[i].cb_idx = 0xFF;
+		ioc->hpr_lookup[i].smid = smid;
+		list_add_tail(&ioc->hpr_lookup[i].tracker_list,
+		    &ioc->hpr_free_list);
+	}
+
+	/* internal queue */
+	INIT_LIST_HEAD(&ioc->internal_free_list);
+	smid = ioc->internal_smid;
+	for (i = 0; i < ioc->internal_depth; i++, smid++) {
+		ioc->internal_lookup[i].cb_idx = 0xFF;
+		ioc->internal_lookup[i].smid = smid;
+		list_add_tail(&ioc->internal_lookup[i].tracker_list,
+		    &ioc->internal_free_list);
+	}
+
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+
+	/* initialize Reply Free Queue */
+	for (i = 0, reply_address = (u32)ioc->reply_dma ;
+	    i < ioc->reply_free_queue_depth ; i++, reply_address +=
+	    ioc->reply_sz) {
+		ioc->reply_free[i] = cpu_to_le32(reply_address);
+		if (ioc->is_mcpu_endpoint)
+			_base_clone_reply_to_sys_mem(ioc,
+					reply_address, i);
+	}
+
+	/* initialize reply queues */
+	if (ioc->is_driver_loading)
+		_base_assign_reply_queues(ioc);
+
+	/* initialize Reply Post Free Queue */
+	index = 0;
+	reply_post_free_contig = ioc->reply_post[0].reply_post_free;
+	list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+		/*
+		 * If RDPQ is enabled, switch to the next allocation.
+		 * Otherwise advance within the contiguous region.
+		 */
+		if (ioc->rdpq_array_enable) {
+			reply_q->reply_post_free =
+				ioc->reply_post[index++].reply_post_free;
+		} else {
+			reply_q->reply_post_free = reply_post_free_contig;
+			reply_post_free_contig += ioc->reply_post_queue_depth;
+		}
+
+		reply_q->reply_post_host_index = 0;
+		for (i = 0; i < ioc->reply_post_queue_depth; i++)
+			reply_q->reply_post_free[i].Words =
+			    cpu_to_le64(ULLONG_MAX);
+		if (!_base_is_controller_msix_enabled(ioc))
+			goto skip_init_reply_post_free_queue;
+	}
+ skip_init_reply_post_free_queue:
+
+	r = _base_send_ioc_init(ioc);
+	if (r) {
+		/*
+		 * No need to check IOC state for fault state & issue
+		 * diag reset during host reset. This check is need
+		 * only during driver load time.
+		 */
+		if (!ioc->is_driver_loading)
+			return r;
+
+		rc = mpt3sas_base_check_for_fault_and_issue_reset(ioc);
+		if (rc || (_base_send_ioc_init(ioc)))
+			return r;
+	}
+
+	/* initialize reply free host index */
+	ioc->reply_free_host_index = ioc->reply_free_queue_depth - 1;
+	writel(ioc->reply_free_host_index, &ioc->chip->ReplyFreeHostIndex);
+
+	/* initialize reply post host index */
+	list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+		if (ioc->combined_reply_queue)
+			writel((reply_q->msix_index & 7)<<
+			   MPI2_RPHI_MSIX_INDEX_SHIFT,
+			   ioc->replyPostRegisterIndex[reply_q->msix_index/8]);
+		else
+			writel(reply_q->msix_index <<
+				MPI2_RPHI_MSIX_INDEX_SHIFT,
+				&ioc->chip->ReplyPostHostIndex);
+
+		if (!_base_is_controller_msix_enabled(ioc))
+			goto skip_init_reply_post_host_index;
+	}
+
+ skip_init_reply_post_host_index:
+
+	mpt3sas_base_unmask_interrupts(ioc);
+
+	if (ioc->hba_mpi_version_belonged != MPI2_VERSION) {
+		r = _base_display_fwpkg_version(ioc);
+		if (r)
+			return r;
+	}
+
+	r = _base_static_config_pages(ioc);
+	if (r)
+		return r;
+
+	r = _base_event_notification(ioc);
+	if (r)
+		return r;
+
+	if (!ioc->shost_recovery) {
+
+		if (ioc->is_warpdrive && ioc->manu_pg10.OEMIdentifier
+		    == 0x80) {
+			hide_flag = (u8) (
+			    le32_to_cpu(ioc->manu_pg10.OEMSpecificFlags0) &
+			    MFG_PAGE10_HIDE_SSDS_MASK);
+			if (hide_flag != MFG_PAGE10_HIDE_SSDS_MASK)
+				ioc->mfg_pg10_hide_flag = hide_flag;
+		}
+
+		ioc->wait_for_discovery_to_complete =
+		    _base_determine_wait_on_discovery(ioc);
+
+		return r; /* scan_start and scan_finished support */
+	}
+
+	r = _base_send_port_enable(ioc);
+	if (r)
+		return r;
+
+	return r;
+}
+
+/**
+ * mpt3sas_base_free_resources - free resources controller resources
+ * @ioc: per adapter object
+ */
+void
+mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc)
+{
+	dexitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
+
+	/* synchronizing freeing resource with pci_access_mutex lock */
+	mutex_lock(&ioc->pci_access_mutex);
+	if (ioc->chip_phys && ioc->chip) {
+		mpt3sas_base_mask_interrupts(ioc);
+		ioc->shost_recovery = 1;
+		mpt3sas_base_make_ioc_ready(ioc, SOFT_RESET);
+		ioc->shost_recovery = 0;
+	}
+
+	mpt3sas_base_unmap_resources(ioc);
+	mutex_unlock(&ioc->pci_access_mutex);
+	return;
+}
+
+/**
+ * mpt3sas_base_attach - attach controller instance
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
+{
+	int r, i, rc;
+	int cpu_id, last_cpu_id = 0;
+
+	dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
+
+	/* setup cpu_msix_table */
+	ioc->cpu_count = num_online_cpus();
+	for_each_online_cpu(cpu_id)
+		last_cpu_id = cpu_id;
+	ioc->cpu_msix_table_sz = last_cpu_id + 1;
+	ioc->cpu_msix_table = kzalloc(ioc->cpu_msix_table_sz, GFP_KERNEL);
+	ioc->reply_queue_count = 1;
+	if (!ioc->cpu_msix_table) {
+		ioc_info(ioc, "Allocation for cpu_msix_table failed!!!\n");
+		r = -ENOMEM;
+		goto out_free_resources;
+	}
+
+	if (ioc->is_warpdrive) {
+		ioc->reply_post_host_index = kcalloc(ioc->cpu_msix_table_sz,
+		    sizeof(resource_size_t *), GFP_KERNEL);
+		if (!ioc->reply_post_host_index) {
+			ioc_info(ioc, "Allocation for reply_post_host_index failed!!!\n");
+			r = -ENOMEM;
+			goto out_free_resources;
+		}
+	}
+
+	ioc->smp_affinity_enable = smp_affinity_enable;
+
+	ioc->rdpq_array_enable_assigned = 0;
+	ioc->use_32bit_dma = false;
+	ioc->dma_mask = 64;
+	if (ioc->is_aero_ioc) {
+		ioc->base_readl = &_base_readl_aero;
+		ioc->base_readl_ext_retry = &_base_readl_ext_retry;
+	} else {
+		ioc->base_readl = &_base_readl;
+		ioc->base_readl_ext_retry = &_base_readl;
+	}
+	r = mpt3sas_base_map_resources(ioc);
+	if (r)
+		goto out_free_resources;
+
+	pci_set_drvdata(ioc->pdev, ioc->shost);
+	r = _base_get_ioc_facts(ioc);
+	if (r) {
+		rc = mpt3sas_base_check_for_fault_and_issue_reset(ioc);
+		if (rc || (_base_get_ioc_facts(ioc)))
+			goto out_free_resources;
+	}
+
+	switch (ioc->hba_mpi_version_belonged) {
+	case MPI2_VERSION:
+		ioc->build_sg_scmd = &_base_build_sg_scmd;
+		ioc->build_sg = &_base_build_sg;
+		ioc->build_zero_len_sge = &_base_build_zero_len_sge;
+		ioc->get_msix_index_for_smlio = &_base_get_msix_index;
+		break;
+	case MPI25_VERSION:
+	case MPI26_VERSION:
+		/*
+		 * In SAS3.0,
+		 * SCSI_IO, SMP_PASSTHRU, SATA_PASSTHRU, Target Assist, and
+		 * Target Status - all require the IEEE formatted scatter gather
+		 * elements.
+		 */
+		ioc->build_sg_scmd = &_base_build_sg_scmd_ieee;
+		ioc->build_sg = &_base_build_sg_ieee;
+		ioc->build_nvme_prp = &_base_build_nvme_prp;
+		ioc->build_zero_len_sge = &_base_build_zero_len_sge_ieee;
+		ioc->sge_size_ieee = sizeof(Mpi2IeeeSgeSimple64_t);
+		if (ioc->high_iops_queues)
+			ioc->get_msix_index_for_smlio =
+					&_base_get_high_iops_msix_index;
+		else
+			ioc->get_msix_index_for_smlio = &_base_get_msix_index;
+		break;
+	}
+	if (ioc->atomic_desc_capable) {
+		ioc->put_smid_default = &_base_put_smid_default_atomic;
+		ioc->put_smid_scsi_io = &_base_put_smid_scsi_io_atomic;
+		ioc->put_smid_fast_path =
+				&_base_put_smid_fast_path_atomic;
+		ioc->put_smid_hi_priority =
+				&_base_put_smid_hi_priority_atomic;
+	} else {
+		ioc->put_smid_default = &_base_put_smid_default;
+		ioc->put_smid_fast_path = &_base_put_smid_fast_path;
+		ioc->put_smid_hi_priority = &_base_put_smid_hi_priority;
+		if (ioc->is_mcpu_endpoint)
+			ioc->put_smid_scsi_io =
+				&_base_put_smid_mpi_ep_scsi_io;
+		else
+			ioc->put_smid_scsi_io = &_base_put_smid_scsi_io;
+	}
+	/*
+	 * These function pointers for other requests that don't
+	 * the require IEEE scatter gather elements.
+	 *
+	 * For example Configuration Pages and SAS IOUNIT Control don't.
+	 */
+	ioc->build_sg_mpi = &_base_build_sg;
+	ioc->build_zero_len_sge_mpi = &_base_build_zero_len_sge;
+
+	r = mpt3sas_base_make_ioc_ready(ioc, SOFT_RESET);
+	if (r)
+		goto out_free_resources;
+
+	ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts,
+	    sizeof(struct mpt3sas_port_facts), GFP_KERNEL);
+	if (!ioc->pfacts) {
+		r = -ENOMEM;
+		goto out_free_resources;
+	}
+
+	for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) {
+		r = _base_get_port_facts(ioc, i);
+		if (r) {
+			rc = mpt3sas_base_check_for_fault_and_issue_reset(ioc);
+			if (rc || (_base_get_port_facts(ioc, i)))
+				goto out_free_resources;
+		}
+	}
+
+	r = _base_allocate_memory_pools(ioc);
+	if (r)
+		goto out_free_resources;
+
+	if (irqpoll_weight > 0)
+		ioc->thresh_hold = irqpoll_weight;
+	else
+		ioc->thresh_hold = ioc->hba_queue_depth/4;
+
+	_base_init_irqpolls(ioc);
+	init_waitqueue_head(&ioc->reset_wq);
+
+	/* allocate memory pd handle bitmask list */
+	ioc->pd_handles_sz = (ioc->facts.MaxDevHandle / 8);
+	if (ioc->facts.MaxDevHandle % 8)
+		ioc->pd_handles_sz++;
+	ioc->pd_handles = kzalloc(ioc->pd_handles_sz,
+	    GFP_KERNEL);
+	if (!ioc->pd_handles) {
+		r = -ENOMEM;
+		goto out_free_resources;
+	}
+	ioc->blocking_handles = kzalloc(ioc->pd_handles_sz,
+	    GFP_KERNEL);
+	if (!ioc->blocking_handles) {
+		r = -ENOMEM;
+		goto out_free_resources;
+	}
+
+	/* allocate memory for pending OS device add list */
+	ioc->pend_os_device_add_sz = (ioc->facts.MaxDevHandle / 8);
+	if (ioc->facts.MaxDevHandle % 8)
+		ioc->pend_os_device_add_sz++;
+	ioc->pend_os_device_add = kzalloc(ioc->pend_os_device_add_sz,
+	    GFP_KERNEL);
+	if (!ioc->pend_os_device_add) {
+		r = -ENOMEM;
+		goto out_free_resources;
+	}
+
+	ioc->device_remove_in_progress_sz = ioc->pend_os_device_add_sz;
+	ioc->device_remove_in_progress =
+		kzalloc(ioc->device_remove_in_progress_sz, GFP_KERNEL);
+	if (!ioc->device_remove_in_progress) {
+		r = -ENOMEM;
+		goto out_free_resources;
+	}
+
+	ioc->fwfault_debug = mpt3sas_fwfault_debug;
+
+	/* base internal command bits */
+	mutex_init(&ioc->base_cmds.mutex);
+	ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+	ioc->base_cmds.status = MPT3_CMD_NOT_USED;
+
+	/* port_enable command bits */
+	ioc->port_enable_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+	ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED;
+
+	/* transport internal command bits */
+	ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+	ioc->transport_cmds.status = MPT3_CMD_NOT_USED;
+	mutex_init(&ioc->transport_cmds.mutex);
+
+	/* scsih internal command bits */
+	ioc->scsih_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+	ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+	mutex_init(&ioc->scsih_cmds.mutex);
+
+	/* task management internal command bits */
+	ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+	ioc->tm_cmds.status = MPT3_CMD_NOT_USED;
+	mutex_init(&ioc->tm_cmds.mutex);
+
+	/* config page internal command bits */
+	ioc->config_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+	ioc->config_cmds.status = MPT3_CMD_NOT_USED;
+	mutex_init(&ioc->config_cmds.mutex);
+
+	/* ctl module internal command bits */
+	ioc->ctl_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+	ioc->ctl_cmds.sense = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
+	ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
+	mutex_init(&ioc->ctl_cmds.mutex);
+
+	if (!ioc->base_cmds.reply || !ioc->port_enable_cmds.reply ||
+	    !ioc->transport_cmds.reply || !ioc->scsih_cmds.reply ||
+	    !ioc->tm_cmds.reply || !ioc->config_cmds.reply ||
+	    !ioc->ctl_cmds.reply || !ioc->ctl_cmds.sense) {
+		r = -ENOMEM;
+		goto out_free_resources;
+	}
+
+	for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
+		ioc->event_masks[i] = -1;
+
+	/* here we enable the events we care about */
+	_base_unmask_events(ioc, MPI2_EVENT_SAS_DISCOVERY);
+	_base_unmask_events(ioc, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE);
+	_base_unmask_events(ioc, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST);
+	_base_unmask_events(ioc, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE);
+	_base_unmask_events(ioc, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE);
+	_base_unmask_events(ioc, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST);
+	_base_unmask_events(ioc, MPI2_EVENT_IR_VOLUME);
+	_base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK);
+	_base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
+	_base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
+	_base_unmask_events(ioc, MPI2_EVENT_TEMP_THRESHOLD);
+	_base_unmask_events(ioc, MPI2_EVENT_ACTIVE_CABLE_EXCEPTION);
+	_base_unmask_events(ioc, MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR);
+	if (ioc->hba_mpi_version_belonged == MPI26_VERSION) {
+		if (ioc->is_gen35_ioc) {
+			_base_unmask_events(ioc,
+				MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE);
+			_base_unmask_events(ioc, MPI2_EVENT_PCIE_ENUMERATION);
+			_base_unmask_events(ioc,
+				MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST);
+		}
+	}
+	r = _base_make_ioc_operational(ioc);
+	if (r == -EAGAIN) {
+		r = _base_make_ioc_operational(ioc);
+		if (r)
+			goto out_free_resources;
+	}
+
+	/*
+	 * Copy current copy of IOCFacts in prev_fw_facts
+	 * and it will be used during online firmware upgrade.
+	 */
+	memcpy(&ioc->prev_fw_facts, &ioc->facts,
+	    sizeof(struct mpt3sas_facts));
+
+	ioc->non_operational_loop = 0;
+	ioc->ioc_coredump_loop = 0;
+	ioc->got_task_abort_from_ioctl = 0;
+	return 0;
+
+ out_free_resources:
+
+	ioc->remove_host = 1;
+
+	mpt3sas_base_free_resources(ioc);
+	_base_release_memory_pools(ioc);
+	pci_set_drvdata(ioc->pdev, NULL);
+	kfree(ioc->cpu_msix_table);
+	if (ioc->is_warpdrive)
+		kfree(ioc->reply_post_host_index);
+	kfree(ioc->pd_handles);
+	kfree(ioc->blocking_handles);
+	kfree(ioc->device_remove_in_progress);
+	kfree(ioc->pend_os_device_add);
+	kfree(ioc->tm_cmds.reply);
+	kfree(ioc->transport_cmds.reply);
+	kfree(ioc->scsih_cmds.reply);
+	kfree(ioc->config_cmds.reply);
+	kfree(ioc->base_cmds.reply);
+	kfree(ioc->port_enable_cmds.reply);
+	kfree(ioc->ctl_cmds.reply);
+	kfree(ioc->ctl_cmds.sense);
+	kfree(ioc->pfacts);
+	ioc->ctl_cmds.reply = NULL;
+	ioc->base_cmds.reply = NULL;
+	ioc->tm_cmds.reply = NULL;
+	ioc->scsih_cmds.reply = NULL;
+	ioc->transport_cmds.reply = NULL;
+	ioc->config_cmds.reply = NULL;
+	ioc->pfacts = NULL;
+	return r;
+}
+
+
+/**
+ * mpt3sas_base_detach - remove controller instance
+ * @ioc: per adapter object
+ */
+void
+mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc)
+{
+	dexitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
+
+	mpt3sas_base_stop_watchdog(ioc);
+	mpt3sas_base_free_resources(ioc);
+	_base_release_memory_pools(ioc);
+	mpt3sas_free_enclosure_list(ioc);
+	pci_set_drvdata(ioc->pdev, NULL);
+	kfree(ioc->cpu_msix_table);
+	if (ioc->is_warpdrive)
+		kfree(ioc->reply_post_host_index);
+	kfree(ioc->pd_handles);
+	kfree(ioc->blocking_handles);
+	kfree(ioc->device_remove_in_progress);
+	kfree(ioc->pend_os_device_add);
+	kfree(ioc->pfacts);
+	kfree(ioc->ctl_cmds.reply);
+	kfree(ioc->ctl_cmds.sense);
+	kfree(ioc->base_cmds.reply);
+	kfree(ioc->port_enable_cmds.reply);
+	kfree(ioc->tm_cmds.reply);
+	kfree(ioc->transport_cmds.reply);
+	kfree(ioc->scsih_cmds.reply);
+	kfree(ioc->config_cmds.reply);
+}
+
+/**
+ * _base_pre_reset_handler - pre reset handler
+ * @ioc: per adapter object
+ */
+static void _base_pre_reset_handler(struct MPT3SAS_ADAPTER *ioc)
+{
+	mpt3sas_scsih_pre_reset_handler(ioc);
+	mpt3sas_ctl_pre_reset_handler(ioc);
+	dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_PRE_RESET\n", __func__));
+}
+
+/**
+ * _base_clear_outstanding_mpt_commands - clears outstanding mpt commands
+ * @ioc: per adapter object
+ */
+static void
+_base_clear_outstanding_mpt_commands(struct MPT3SAS_ADAPTER *ioc)
+{
+	dtmprintk(ioc,
+	    ioc_info(ioc, "%s: clear outstanding mpt cmds\n", __func__));
+	if (ioc->transport_cmds.status & MPT3_CMD_PENDING) {
+		ioc->transport_cmds.status |= MPT3_CMD_RESET;
+		mpt3sas_base_free_smid(ioc, ioc->transport_cmds.smid);
+		complete(&ioc->transport_cmds.done);
+	}
+	if (ioc->base_cmds.status & MPT3_CMD_PENDING) {
+		ioc->base_cmds.status |= MPT3_CMD_RESET;
+		mpt3sas_base_free_smid(ioc, ioc->base_cmds.smid);
+		complete(&ioc->base_cmds.done);
+	}
+	if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) {
+		ioc->port_enable_failed = 1;
+		ioc->port_enable_cmds.status |= MPT3_CMD_RESET;
+		mpt3sas_base_free_smid(ioc, ioc->port_enable_cmds.smid);
+		if (ioc->is_driver_loading) {
+			ioc->start_scan_failed =
+				MPI2_IOCSTATUS_INTERNAL_ERROR;
+			ioc->start_scan = 0;
+		} else {
+			complete(&ioc->port_enable_cmds.done);
+		}
+	}
+	if (ioc->config_cmds.status & MPT3_CMD_PENDING) {
+		ioc->config_cmds.status |= MPT3_CMD_RESET;
+		mpt3sas_base_free_smid(ioc, ioc->config_cmds.smid);
+		ioc->config_cmds.smid = USHRT_MAX;
+		complete(&ioc->config_cmds.done);
+	}
+}
+
+/**
+ * _base_clear_outstanding_commands - clear all outstanding commands
+ * @ioc: per adapter object
+ */
+static void _base_clear_outstanding_commands(struct MPT3SAS_ADAPTER *ioc)
+{
+	mpt3sas_scsih_clear_outstanding_scsi_tm_commands(ioc);
+	mpt3sas_ctl_clear_outstanding_ioctls(ioc);
+	_base_clear_outstanding_mpt_commands(ioc);
+}
+
+/**
+ * _base_reset_done_handler - reset done handler
+ * @ioc: per adapter object
+ */
+static void _base_reset_done_handler(struct MPT3SAS_ADAPTER *ioc)
+{
+	mpt3sas_scsih_reset_done_handler(ioc);
+	mpt3sas_ctl_reset_done_handler(ioc);
+	dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_DONE_RESET\n", __func__));
+}
+
+/**
+ * mpt3sas_wait_for_commands_to_complete - reset controller
+ * @ioc: Pointer to MPT_ADAPTER structure
+ *
+ * This function is waiting 10s for all pending commands to complete
+ * prior to putting controller in reset.
+ */
+void
+mpt3sas_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc)
+{
+	u32 ioc_state;
+
+	ioc->pending_io_count = 0;
+
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+	if ((ioc_state & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL)
+		return;
+
+	/* pending command count */
+	ioc->pending_io_count = scsi_host_busy(ioc->shost);
+
+	if (!ioc->pending_io_count)
+		return;
+
+	/* wait for pending commands to complete */
+	wait_event_timeout(ioc->reset_wq, ioc->pending_io_count == 0, 10 * HZ);
+}
+
+/**
+ * _base_check_ioc_facts_changes - Look for increase/decrease of IOCFacts
+ *     attributes during online firmware upgrade and update the corresponding
+ *     IOC variables accordingly.
+ *
+ * @ioc: Pointer to MPT_ADAPTER structure
+ */
+static int
+_base_check_ioc_facts_changes(struct MPT3SAS_ADAPTER *ioc)
+{
+	u16 pd_handles_sz;
+	void *pd_handles = NULL, *blocking_handles = NULL;
+	void *pend_os_device_add = NULL, *device_remove_in_progress = NULL;
+	struct mpt3sas_facts *old_facts = &ioc->prev_fw_facts;
+
+	if (ioc->facts.MaxDevHandle > old_facts->MaxDevHandle) {
+		pd_handles_sz = (ioc->facts.MaxDevHandle / 8);
+		if (ioc->facts.MaxDevHandle % 8)
+			pd_handles_sz++;
+
+		pd_handles = krealloc(ioc->pd_handles, pd_handles_sz,
+		    GFP_KERNEL);
+		if (!pd_handles) {
+			ioc_info(ioc,
+			    "Unable to allocate the memory for pd_handles of sz: %d\n",
+			    pd_handles_sz);
+			return -ENOMEM;
+		}
+		memset(pd_handles + ioc->pd_handles_sz, 0,
+		    (pd_handles_sz - ioc->pd_handles_sz));
+		ioc->pd_handles = pd_handles;
+
+		blocking_handles = krealloc(ioc->blocking_handles,
+		    pd_handles_sz, GFP_KERNEL);
+		if (!blocking_handles) {
+			ioc_info(ioc,
+			    "Unable to allocate the memory for "
+			    "blocking_handles of sz: %d\n",
+			    pd_handles_sz);
+			return -ENOMEM;
+		}
+		memset(blocking_handles + ioc->pd_handles_sz, 0,
+		    (pd_handles_sz - ioc->pd_handles_sz));
+		ioc->blocking_handles = blocking_handles;
+		ioc->pd_handles_sz = pd_handles_sz;
+
+		pend_os_device_add = krealloc(ioc->pend_os_device_add,
+		    pd_handles_sz, GFP_KERNEL);
+		if (!pend_os_device_add) {
+			ioc_info(ioc,
+			    "Unable to allocate the memory for pend_os_device_add of sz: %d\n",
+			    pd_handles_sz);
+			return -ENOMEM;
+		}
+		memset(pend_os_device_add + ioc->pend_os_device_add_sz, 0,
+		    (pd_handles_sz - ioc->pend_os_device_add_sz));
+		ioc->pend_os_device_add = pend_os_device_add;
+		ioc->pend_os_device_add_sz = pd_handles_sz;
+
+		device_remove_in_progress = krealloc(
+		    ioc->device_remove_in_progress, pd_handles_sz, GFP_KERNEL);
+		if (!device_remove_in_progress) {
+			ioc_info(ioc,
+			    "Unable to allocate the memory for "
+			    "device_remove_in_progress of sz: %d\n "
+			    , pd_handles_sz);
+			return -ENOMEM;
+		}
+		memset(device_remove_in_progress +
+		    ioc->device_remove_in_progress_sz, 0,
+		    (pd_handles_sz - ioc->device_remove_in_progress_sz));
+		ioc->device_remove_in_progress = device_remove_in_progress;
+		ioc->device_remove_in_progress_sz = pd_handles_sz;
+	}
+
+	memcpy(&ioc->prev_fw_facts, &ioc->facts, sizeof(struct mpt3sas_facts));
+	return 0;
+}
+
+/**
+ * mpt3sas_base_hard_reset_handler - reset controller
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @type: FORCE_BIG_HAMMER or SOFT_RESET
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc,
+	enum reset_type type)
+{
+	int r;
+	unsigned long flags;
+	u32 ioc_state;
+	u8 is_fault = 0, is_trigger = 0;
+
+	dtmprintk(ioc, ioc_info(ioc, "%s: enter\n", __func__));
+
+	if (ioc->pci_error_recovery) {
+		ioc_err(ioc, "%s: pci error recovery reset\n", __func__);
+		r = 0;
+		goto out_unlocked;
+	}
+
+	if (mpt3sas_fwfault_debug)
+		mpt3sas_halt_firmware(ioc);
+
+	/* wait for an active reset in progress to complete */
+	mutex_lock(&ioc->reset_in_progress_mutex);
+
+	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+	ioc->shost_recovery = 1;
+	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+
+	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) &&
+	    (!(ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED))) {
+		is_trigger = 1;
+		ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+		if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT ||
+		    (ioc_state & MPI2_IOC_STATE_MASK) ==
+		    MPI2_IOC_STATE_COREDUMP) {
+			is_fault = 1;
+			ioc->htb_rel.trigger_info_dwords[1] =
+			    (ioc_state & MPI2_DOORBELL_DATA_MASK);
+		}
+	}
+	_base_pre_reset_handler(ioc);
+	mpt3sas_wait_for_commands_to_complete(ioc);
+	mpt3sas_base_mask_interrupts(ioc);
+	mpt3sas_base_pause_mq_polling(ioc);
+	r = mpt3sas_base_make_ioc_ready(ioc, type);
+	if (r)
+		goto out;
+	_base_clear_outstanding_commands(ioc);
+
+	/* If this hard reset is called while port enable is active, then
+	 * there is no reason to call make_ioc_operational
+	 */
+	if (ioc->is_driver_loading && ioc->port_enable_failed) {
+		ioc->remove_host = 1;
+		r = -EFAULT;
+		goto out;
+	}
+	r = _base_get_ioc_facts(ioc);
+	if (r)
+		goto out;
+
+	r = _base_check_ioc_facts_changes(ioc);
+	if (r) {
+		ioc_info(ioc,
+		    "Some of the parameters got changed in this new firmware"
+		    " image and it requires system reboot\n");
+		goto out;
+	}
+	if (ioc->rdpq_array_enable && !ioc->rdpq_array_capable)
+		panic("%s: Issue occurred with flashing controller firmware."
+		      "Please reboot the system and ensure that the correct"
+		      " firmware version is running\n", ioc->name);
+
+	r = _base_make_ioc_operational(ioc);
+	if (!r)
+		_base_reset_done_handler(ioc);
+
+ out:
+	ioc_info(ioc, "%s: %s\n", __func__, r == 0 ? "SUCCESS" : "FAILED");
+
+	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+	ioc->shost_recovery = 0;
+	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+	ioc->ioc_reset_count++;
+	mutex_unlock(&ioc->reset_in_progress_mutex);
+	mpt3sas_base_resume_mq_polling(ioc);
+
+ out_unlocked:
+	if ((r == 0) && is_trigger) {
+		if (is_fault)
+			mpt3sas_trigger_master(ioc, MASTER_TRIGGER_FW_FAULT);
+		else
+			mpt3sas_trigger_master(ioc,
+			    MASTER_TRIGGER_ADAPTER_RESET);
+	}
+	dtmprintk(ioc, ioc_info(ioc, "%s: exit\n", __func__));
+	return r;
+}
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
new file mode 100644
index 0000000000..1be0850ca1
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -0,0 +1,2072 @@
+/*
+ * This is the Fusion MPT base driver providing common API layer interface
+ * for access to MPT (Message Passing Technology) firmware.
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.h
+ * Copyright (C) 2012-2014  LSI Corporation
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#ifndef MPT3SAS_BASE_H_INCLUDED
+#define MPT3SAS_BASE_H_INCLUDED
+
+#include "mpi/mpi2_type.h"
+#include "mpi/mpi2.h"
+#include "mpi/mpi2_ioc.h"
+#include "mpi/mpi2_cnfg.h"
+#include "mpi/mpi2_init.h"
+#include "mpi/mpi2_raid.h"
+#include "mpi/mpi2_tool.h"
+#include "mpi/mpi2_sas.h"
+#include "mpi/mpi2_pci.h"
+#include "mpi/mpi2_image.h"
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_transport_sas.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_eh.h>
+#include <linux/pci.h>
+#include <linux/poll.h>
+#include <linux/irq_poll.h>
+
+#include "mpt3sas_debug.h"
+#include "mpt3sas_trigger_diag.h"
+#include "mpt3sas_trigger_pages.h"
+
+/* driver versioning info */
+#define MPT3SAS_DRIVER_NAME		"mpt3sas"
+#define MPT3SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>"
+#define MPT3SAS_DESCRIPTION	"LSI MPT Fusion SAS 3.0 Device Driver"
+#define MPT3SAS_DRIVER_VERSION		"43.100.00.00"
+#define MPT3SAS_MAJOR_VERSION		43
+#define MPT3SAS_MINOR_VERSION		100
+#define MPT3SAS_BUILD_VERSION		0
+#define MPT3SAS_RELEASE_VERSION	00
+
+#define MPT2SAS_DRIVER_NAME		"mpt2sas"
+#define MPT2SAS_DESCRIPTION	"LSI MPT Fusion SAS 2.0 Device Driver"
+#define MPT2SAS_DRIVER_VERSION		"20.102.00.00"
+#define MPT2SAS_MAJOR_VERSION		20
+#define MPT2SAS_MINOR_VERSION		102
+#define MPT2SAS_BUILD_VERSION		0
+#define MPT2SAS_RELEASE_VERSION	00
+
+/* CoreDump: Default timeout */
+#define MPT3SAS_DEFAULT_COREDUMP_TIMEOUT_SECONDS	(15) /*15 seconds*/
+#define MPT3SAS_COREDUMP_LOOP_DONE                     (0xFF)
+#define MPT3SAS_TIMESYNC_TIMEOUT_SECONDS		(10) /* 10 seconds */
+#define MPT3SAS_TIMESYNC_UPDATE_INTERVAL		(900) /* 15 minutes */
+#define MPT3SAS_TIMESYNC_UNIT_MASK			(0x80) /* bit 7 */
+#define MPT3SAS_TIMESYNC_MASK				(0x7F) /* 0 - 6 bits */
+#define SECONDS_PER_MIN					(60)
+#define SECONDS_PER_HOUR				(3600)
+#define MPT3SAS_COREDUMP_LOOP_DONE			(0xFF)
+#define MPI26_SET_IOC_PARAMETER_SYNC_TIMESTAMP		(0x81)
+
+/*
+ * Set MPT3SAS_SG_DEPTH value based on user input.
+ */
+#define MPT_MAX_PHYS_SEGMENTS	SG_CHUNK_SIZE
+#define MPT_MIN_PHYS_SEGMENTS	16
+#define MPT_KDUMP_MIN_PHYS_SEGMENTS	32
+
+#define MCPU_MAX_CHAINS_PER_IO	3
+
+#ifdef CONFIG_SCSI_MPT3SAS_MAX_SGE
+#define MPT3SAS_SG_DEPTH		CONFIG_SCSI_MPT3SAS_MAX_SGE
+#else
+#define MPT3SAS_SG_DEPTH		MPT_MAX_PHYS_SEGMENTS
+#endif
+
+#ifdef CONFIG_SCSI_MPT2SAS_MAX_SGE
+#define MPT2SAS_SG_DEPTH		CONFIG_SCSI_MPT2SAS_MAX_SGE
+#else
+#define MPT2SAS_SG_DEPTH		MPT_MAX_PHYS_SEGMENTS
+#endif
+
+/*
+ * Generic Defines
+ */
+#define MPT3SAS_SATA_QUEUE_DEPTH	32
+#define MPT3SAS_SAS_QUEUE_DEPTH		254
+#define MPT3SAS_RAID_QUEUE_DEPTH	128
+#define MPT3SAS_KDUMP_SCSI_IO_DEPTH	200
+
+#define MPT3SAS_RAID_MAX_SECTORS	8192
+#define MPT3SAS_HOST_PAGE_SIZE_4K	12
+#define MPT3SAS_NVME_QUEUE_DEPTH	128
+#define MPT_NAME_LENGTH			32	/* generic length of strings */
+#define MPT_STRING_LENGTH		64
+#define MPI_FRAME_START_OFFSET		256
+#define REPLY_FREE_POOL_SIZE		512 /*(32 maxcredix *4)*(4 times)*/
+
+#define MPT_MAX_CALLBACKS		32
+
+#define MPT_MAX_HBA_NUM_PHYS		32
+
+#define INTERNAL_CMDS_COUNT		10	/* reserved cmds */
+/* reserved for issuing internally framed scsi io cmds */
+#define INTERNAL_SCSIIO_CMDS_COUNT	3
+
+#define MPI3_HIM_MASK			0xFFFFFFFF /* mask every bit*/
+
+#define MPT3SAS_INVALID_DEVICE_HANDLE	0xFFFF
+
+#define MAX_CHAIN_ELEMT_SZ		16
+#define DEFAULT_NUM_FWCHAIN_ELEMTS	8
+
+#define IO_UNIT_CONTROL_SHUTDOWN_TIMEOUT 6
+#define FW_IMG_HDR_READ_TIMEOUT	15
+
+#define IOC_OPERATIONAL_WAIT_COUNT	10
+
+/*
+ * NVMe defines
+ */
+#define	NVME_PRP_SIZE			8	/* PRP size */
+#define	NVME_ERROR_RESPONSE_SIZE	16	/* Max NVME Error Response */
+#define NVME_TASK_ABORT_MIN_TIMEOUT	6
+#define NVME_TASK_ABORT_MAX_TIMEOUT	60
+#define NVME_TASK_MNGT_CUSTOM_MASK	(0x0010)
+#define	NVME_PRP_PAGE_SIZE		4096	/* Page size */
+
+struct mpt3sas_nvme_cmd {
+	u8	rsvd[24];
+	__le64	prp1;
+	__le64	prp2;
+};
+
+/*
+ * logging format
+ */
+#define ioc_err(ioc, fmt, ...)						\
+	pr_err("%s: " fmt, (ioc)->name, ##__VA_ARGS__)
+#define ioc_notice(ioc, fmt, ...)					\
+	pr_notice("%s: " fmt, (ioc)->name, ##__VA_ARGS__)
+#define ioc_warn(ioc, fmt, ...)						\
+	pr_warn("%s: " fmt, (ioc)->name, ##__VA_ARGS__)
+#define ioc_info(ioc, fmt, ...)						\
+	pr_info("%s: " fmt, (ioc)->name, ##__VA_ARGS__)
+
+/*
+ *  WarpDrive Specific Log codes
+ */
+
+#define MPT2_WARPDRIVE_LOGENTRY		(0x8002)
+#define MPT2_WARPDRIVE_LC_SSDT			(0x41)
+#define MPT2_WARPDRIVE_LC_SSDLW		(0x43)
+#define MPT2_WARPDRIVE_LC_SSDLF		(0x44)
+#define MPT2_WARPDRIVE_LC_BRMF			(0x4D)
+
+/*
+ * per target private data
+ */
+#define MPT_TARGET_FLAGS_RAID_COMPONENT	0x01
+#define MPT_TARGET_FLAGS_VOLUME		0x02
+#define MPT_TARGET_FLAGS_DELETED	0x04
+#define MPT_TARGET_FASTPATH_IO		0x08
+#define MPT_TARGET_FLAGS_PCIE_DEVICE	0x10
+
+#define SAS2_PCI_DEVICE_B0_REVISION	(0x01)
+#define SAS3_PCI_DEVICE_C0_REVISION	(0x02)
+
+/* Atlas PCIe Switch Management Port */
+#define MPI26_ATLAS_PCIe_SWITCH_DEVID	(0x00B2)
+
+/*
+ * Intel HBA branding
+ */
+#define MPT2SAS_INTEL_RMS25JB080_BRANDING    \
+	"Intel(R) Integrated RAID Module RMS25JB080"
+#define MPT2SAS_INTEL_RMS25JB040_BRANDING    \
+	"Intel(R) Integrated RAID Module RMS25JB040"
+#define MPT2SAS_INTEL_RMS25KB080_BRANDING    \
+	"Intel(R) Integrated RAID Module RMS25KB080"
+#define MPT2SAS_INTEL_RMS25KB040_BRANDING    \
+	"Intel(R) Integrated RAID Module RMS25KB040"
+#define MPT2SAS_INTEL_RMS25LB040_BRANDING	\
+	"Intel(R) Integrated RAID Module RMS25LB040"
+#define MPT2SAS_INTEL_RMS25LB080_BRANDING	\
+	"Intel(R) Integrated RAID Module RMS25LB080"
+#define MPT2SAS_INTEL_RMS2LL080_BRANDING	\
+	"Intel Integrated RAID Module RMS2LL080"
+#define MPT2SAS_INTEL_RMS2LL040_BRANDING	\
+	"Intel Integrated RAID Module RMS2LL040"
+#define MPT2SAS_INTEL_RS25GB008_BRANDING       \
+	"Intel(R) RAID Controller RS25GB008"
+#define MPT2SAS_INTEL_SSD910_BRANDING          \
+	"Intel(R) SSD 910 Series"
+
+#define MPT3SAS_INTEL_RMS3JC080_BRANDING       \
+	"Intel(R) Integrated RAID Module RMS3JC080"
+#define MPT3SAS_INTEL_RS3GC008_BRANDING       \
+	"Intel(R) RAID Controller RS3GC008"
+#define MPT3SAS_INTEL_RS3FC044_BRANDING       \
+	"Intel(R) RAID Controller RS3FC044"
+#define MPT3SAS_INTEL_RS3UC080_BRANDING       \
+	"Intel(R) RAID Controller RS3UC080"
+
+/*
+ * Intel HBA SSDIDs
+ */
+#define MPT2SAS_INTEL_RMS25JB080_SSDID		0x3516
+#define MPT2SAS_INTEL_RMS25JB040_SSDID		0x3517
+#define MPT2SAS_INTEL_RMS25KB080_SSDID		0x3518
+#define MPT2SAS_INTEL_RMS25KB040_SSDID		0x3519
+#define MPT2SAS_INTEL_RMS25LB040_SSDID		0x351A
+#define MPT2SAS_INTEL_RMS25LB080_SSDID		0x351B
+#define MPT2SAS_INTEL_RMS2LL080_SSDID		0x350E
+#define MPT2SAS_INTEL_RMS2LL040_SSDID		0x350F
+#define MPT2SAS_INTEL_RS25GB008_SSDID		0x3000
+#define MPT2SAS_INTEL_SSD910_SSDID		0x3700
+
+#define MPT3SAS_INTEL_RMS3JC080_SSDID		0x3521
+#define MPT3SAS_INTEL_RS3GC008_SSDID		0x3522
+#define MPT3SAS_INTEL_RS3FC044_SSDID		0x3523
+#define MPT3SAS_INTEL_RS3UC080_SSDID		0x3524
+
+/*
+ * Dell HBA branding
+ */
+#define MPT2SAS_DELL_BRANDING_SIZE                 32
+
+#define MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING        "Dell 6Gbps SAS HBA"
+#define MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING    "Dell PERC H200 Adapter"
+#define MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING "Dell PERC H200 Integrated"
+#define MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING    "Dell PERC H200 Modular"
+#define MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING   "Dell PERC H200 Embedded"
+#define MPT2SAS_DELL_PERC_H200_BRANDING            "Dell PERC H200"
+#define MPT2SAS_DELL_6GBPS_SAS_BRANDING            "Dell 6Gbps SAS"
+
+#define MPT3SAS_DELL_12G_HBA_BRANDING       \
+	"Dell 12Gbps HBA"
+
+/*
+ * Dell HBA SSDIDs
+ */
+#define MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID	0x1F1C
+#define MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID	0x1F1D
+#define MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID	0x1F1E
+#define MPT2SAS_DELL_PERC_H200_MODULAR_SSDID	0x1F1F
+#define MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID	0x1F20
+#define MPT2SAS_DELL_PERC_H200_SSDID		0x1F21
+#define MPT2SAS_DELL_6GBPS_SAS_SSDID		0x1F22
+
+#define MPT3SAS_DELL_12G_HBA_SSDID		0x1F46
+
+/*
+ * Cisco HBA branding
+ */
+#define MPT3SAS_CISCO_12G_8E_HBA_BRANDING		\
+	"Cisco 9300-8E 12G SAS HBA"
+#define MPT3SAS_CISCO_12G_8I_HBA_BRANDING		\
+	"Cisco 9300-8i 12G SAS HBA"
+#define MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING	\
+	"Cisco 12G Modular SAS Pass through Controller"
+#define MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_BRANDING		\
+	"UCS C3X60 12G SAS Pass through Controller"
+/*
+ * Cisco HBA SSSDIDs
+ */
+#define MPT3SAS_CISCO_12G_8E_HBA_SSDID  0x14C
+#define MPT3SAS_CISCO_12G_8I_HBA_SSDID  0x154
+#define MPT3SAS_CISCO_12G_AVILA_HBA_SSDID  0x155
+#define MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_SSDID  0x156
+
+/*
+ * status bits for ioc->diag_buffer_status
+ */
+#define MPT3_DIAG_BUFFER_IS_REGISTERED	(0x01)
+#define MPT3_DIAG_BUFFER_IS_RELEASED	(0x02)
+#define MPT3_DIAG_BUFFER_IS_DIAG_RESET	(0x04)
+#define MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED (0x08)
+#define MPT3_DIAG_BUFFER_IS_APP_OWNED (0x10)
+
+/*
+ * HP HBA branding
+ */
+#define MPT2SAS_HP_3PAR_SSVID                0x1590
+
+#define MPT2SAS_HP_2_4_INTERNAL_BRANDING	\
+	"HP H220 Host Bus Adapter"
+#define MPT2SAS_HP_2_4_EXTERNAL_BRANDING	\
+	"HP H221 Host Bus Adapter"
+#define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING	\
+	"HP H222 Host Bus Adapter"
+#define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING	\
+	"HP H220i Host Bus Adapter"
+#define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING	\
+	"HP H210i Host Bus Adapter"
+
+/*
+ * HO HBA SSDIDs
+ */
+#define MPT2SAS_HP_2_4_INTERNAL_SSDID			0x0041
+#define MPT2SAS_HP_2_4_EXTERNAL_SSDID			0x0042
+#define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID	0x0043
+#define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID		0x0044
+#define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID		0x0046
+
+/*
+ * Combined Reply Queue constants,
+ * There are twelve Supplemental Reply Post Host Index Registers
+ * and each register is at offset 0x10 bytes from the previous one.
+ */
+#define MAX_COMBINED_MSIX_VECTORS(gen35) ((gen35 == 1) ? 16 : 8)
+#define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT_G3	12
+#define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT_G35	16
+#define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET	(0x10)
+#define MPT3_MIN_IRQS					1
+
+/* OEM Identifiers */
+#define MFG10_OEM_ID_INVALID                   (0x00000000)
+#define MFG10_OEM_ID_DELL                      (0x00000001)
+#define MFG10_OEM_ID_FSC                       (0x00000002)
+#define MFG10_OEM_ID_SUN                       (0x00000003)
+#define MFG10_OEM_ID_IBM                       (0x00000004)
+
+/* GENERIC Flags 0*/
+#define MFG10_GF0_OCE_DISABLED                 (0x00000001)
+#define MFG10_GF0_R1E_DRIVE_COUNT              (0x00000002)
+#define MFG10_GF0_R10_DISPLAY                  (0x00000004)
+#define MFG10_GF0_SSD_DATA_SCRUB_DISABLE       (0x00000008)
+#define MFG10_GF0_SINGLE_DRIVE_R0              (0x00000010)
+
+#define VIRTUAL_IO_FAILED_RETRY			(0x32010081)
+
+/* High IOPs definitions */
+#define MPT3SAS_DEVICE_HIGH_IOPS_DEPTH		8
+#define MPT3SAS_HIGH_IOPS_REPLY_QUEUES		8
+#define MPT3SAS_HIGH_IOPS_BATCH_COUNT		16
+#define MPT3SAS_GEN35_MAX_MSIX_QUEUES		128
+#define RDPQ_MAX_INDEX_IN_ONE_CHUNK		16
+
+/* OEM Specific Flags will come from OEM specific header files */
+struct Mpi2ManufacturingPage10_t {
+	MPI2_CONFIG_PAGE_HEADER	Header;		/* 00h */
+	U8	OEMIdentifier;			/* 04h */
+	U8	Reserved1;			/* 05h */
+	U16	Reserved2;			/* 08h */
+	U32	Reserved3;			/* 0Ch */
+	U32	GenericFlags0;			/* 10h */
+	U32	GenericFlags1;			/* 14h */
+	U32	Reserved4;			/* 18h */
+	U32	OEMSpecificFlags0;		/* 1Ch */
+	U32	OEMSpecificFlags1;		/* 20h */
+	U32	Reserved5[18];			/* 24h - 60h*/
+};
+
+
+/* Miscellaneous options */
+struct Mpi2ManufacturingPage11_t {
+	MPI2_CONFIG_PAGE_HEADER Header;		/* 00h */
+	__le32	Reserved1;			/* 04h */
+	u8	Reserved2;			/* 08h */
+	u8	EEDPTagMode;			/* 09h */
+	u8	Reserved3;			/* 0Ah */
+	u8	Reserved4;			/* 0Bh */
+	__le32	Reserved5[8];			/* 0Ch-2Ch */
+	u16	AddlFlags2;			/* 2Ch */
+	u8	AddlFlags3;			/* 2Eh */
+	u8	Reserved6;			/* 2Fh */
+	__le32	Reserved7[7];			/* 30h - 4Bh */
+	u8	NVMeAbortTO;			/* 4Ch */
+	u8	NumPerDevEvents;		/* 4Dh */
+	u8	HostTraceBufferDecrementSizeKB;	/* 4Eh */
+	u8	HostTraceBufferFlags;		/* 4Fh */
+	u16	HostTraceBufferMaxSizeKB;	/* 50h */
+	u16	HostTraceBufferMinSizeKB;	/* 52h */
+	u8	CoreDumpTOSec;			/* 54h */
+	u8	TimeSyncInterval;		/* 55h */
+	u16	Reserved9;			/* 56h */
+	__le32	Reserved10;			/* 58h */
+};
+
+/**
+ * struct MPT3SAS_TARGET - starget private hostdata
+ * @starget: starget object
+ * @sas_address: target sas address
+ * @raid_device: raid_device pointer to access volume data
+ * @handle: device handle
+ * @num_luns: number luns
+ * @flags: MPT_TARGET_FLAGS_XXX flags
+ * @deleted: target flaged for deletion
+ * @tm_busy: target is busy with TM request.
+ * @port: hba port entry containing target's port number info
+ * @sas_dev: The sas_device associated with this target
+ * @pcie_dev: The pcie device associated with this target
+ */
+struct MPT3SAS_TARGET {
+	struct scsi_target *starget;
+	u64	sas_address;
+	struct _raid_device *raid_device;
+	u16	handle;
+	int	num_luns;
+	u32	flags;
+	u8	deleted;
+	u8	tm_busy;
+	struct hba_port *port;
+	struct _sas_device *sas_dev;
+	struct _pcie_device *pcie_dev;
+};
+
+
+/*
+ * per device private data
+ */
+#define MPT_DEVICE_FLAGS_INIT		0x01
+
+#define MFG_PAGE10_HIDE_SSDS_MASK	(0x00000003)
+#define MFG_PAGE10_HIDE_ALL_DISKS	(0x00)
+#define MFG_PAGE10_EXPOSE_ALL_DISKS	(0x01)
+#define MFG_PAGE10_HIDE_IF_VOL_PRESENT	(0x02)
+
+/**
+ * struct MPT3SAS_DEVICE - sdev private hostdata
+ * @sas_target: starget private hostdata
+ * @lun: lun number
+ * @flags: MPT_DEVICE_XXX flags
+ * @configured_lun: lun is configured
+ * @block: device is in SDEV_BLOCK state
+ * @tlr_snoop_check: flag used in determining whether to disable TLR
+ * @eedp_enable: eedp support enable bit
+ * @eedp_type: 0(type_1), 1(type_2), 2(type_3)
+ * @eedp_block_length: block size
+ * @ata_command_pending: SATL passthrough outstanding for device
+ */
+struct MPT3SAS_DEVICE {
+	struct MPT3SAS_TARGET *sas_target;
+	unsigned int	lun;
+	u32	flags;
+	u8	configured_lun;
+	u8	block;
+	u8	tlr_snoop_check;
+	u8	ignore_delay_remove;
+	/* Iopriority Command Handling */
+	u8	ncq_prio_enable;
+	/*
+	 * Bug workaround for SATL handling: the mpt2/3sas firmware
+	 * doesn't return BUSY or TASK_SET_FULL for subsequent
+	 * commands while a SATL pass through is in operation as the
+	 * spec requires, it simply does nothing with them until the
+	 * pass through completes, causing them possibly to timeout if
+	 * the passthrough is a long executing command (like format or
+	 * secure erase).  This variable allows us to do the right
+	 * thing while a SATL command is pending.
+	 */
+	unsigned long ata_command_pending;
+
+};
+
+#define MPT3_CMD_NOT_USED	0x8000	/* free */
+#define MPT3_CMD_COMPLETE	0x0001	/* completed */
+#define MPT3_CMD_PENDING	0x0002	/* pending */
+#define MPT3_CMD_REPLY_VALID	0x0004	/* reply is valid */
+#define MPT3_CMD_RESET		0x0008	/* host reset dropped the command */
+#define MPT3_CMD_COMPLETE_ASYNC 0x0010  /* tells whether cmd completes in same thread or not */
+
+/**
+ * struct _internal_cmd - internal commands struct
+ * @mutex: mutex
+ * @done: completion
+ * @reply: reply message pointer
+ * @sense: sense data
+ * @status: MPT3_CMD_XXX status
+ * @smid: system message id
+ */
+struct _internal_cmd {
+	struct mutex mutex;
+	struct completion done;
+	void	*reply;
+	void	*sense;
+	u16	status;
+	u16	smid;
+};
+
+
+
+/**
+ * struct _sas_device - attached device information
+ * @list: sas device list
+ * @starget: starget object
+ * @sas_address: device sas address
+ * @device_name: retrieved from the SAS IDENTIFY frame.
+ * @handle: device handle
+ * @sas_address_parent: sas address of parent expander or sas host
+ * @enclosure_handle: enclosure handle
+ * @enclosure_logical_id: enclosure logical identifier
+ * @volume_handle: volume handle (valid when hidden raid member)
+ * @volume_wwid: volume unique identifier
+ * @device_info: bitfield provides detailed info about the device
+ * @id: target id
+ * @channel: target channel
+ * @slot: number number
+ * @phy: phy identifier provided in sas device page 0
+ * @responding: used in _scsih_sas_device_mark_responding
+ * @fast_path: fast path feature enable bit
+ * @pfa_led_on: flag for PFA LED status
+ * @pend_sas_rphy_add: flag to check if device is in sas_rphy_add()
+ *	addition routine.
+ * @chassis_slot: chassis slot
+ * @is_chassis_slot_valid: chassis slot valid or not
+ * @port: hba port entry containing device's port number info
+ * @rphy: device's sas_rphy address used to identify this device structure in
+ *	target_alloc callback function
+ */
+struct _sas_device {
+	struct list_head list;
+	struct scsi_target *starget;
+	u64	sas_address;
+	u64	device_name;
+	u16	handle;
+	u64	sas_address_parent;
+	u16	enclosure_handle;
+	u64	enclosure_logical_id;
+	u16	volume_handle;
+	u64	volume_wwid;
+	u32	device_info;
+	int	id;
+	int	channel;
+	u16	slot;
+	u8	phy;
+	u8	responding;
+	u8	fast_path;
+	u8	pfa_led_on;
+	u8	pend_sas_rphy_add;
+	u8	enclosure_level;
+	u8	chassis_slot;
+	u8	is_chassis_slot_valid;
+	u8	connector_name[5];
+	struct kref refcount;
+	u8	port_type;
+	struct hba_port *port;
+	struct sas_rphy *rphy;
+};
+
+static inline void sas_device_get(struct _sas_device *s)
+{
+	kref_get(&s->refcount);
+}
+
+static inline void sas_device_free(struct kref *r)
+{
+	kfree(container_of(r, struct _sas_device, refcount));
+}
+
+static inline void sas_device_put(struct _sas_device *s)
+{
+	kref_put(&s->refcount, sas_device_free);
+}
+
+/*
+ * struct _pcie_device - attached PCIe device information
+ * @list: pcie device list
+ * @starget: starget object
+ * @wwid: device WWID
+ * @handle: device handle
+ * @device_info: bitfield provides detailed info about the device
+ * @id: target id
+ * @channel: target channel
+ * @slot: slot number
+ * @port_num: port number
+ * @responding: used in _scsih_pcie_device_mark_responding
+ * @fast_path: fast path feature enable bit
+ * @nvme_mdts: MaximumDataTransferSize from PCIe Device Page 2 for
+ *		NVMe device only
+ * @enclosure_handle: enclosure handle
+ * @enclosure_logical_id: enclosure logical identifier
+ * @enclosure_level: The level of device's enclosure from the controller
+ * @connector_name: ASCII value of the Connector's name
+ * @serial_number: pointer of serial number string allocated runtime
+ * @access_status: Device's Access Status
+ * @shutdown_latency: NVMe device's RTD3 Entry Latency
+ * @refcount: reference count for deletion
+ */
+struct _pcie_device {
+	struct list_head list;
+	struct scsi_target *starget;
+	u64	wwid;
+	u16	handle;
+	u32	device_info;
+	int	id;
+	int	channel;
+	u16	slot;
+	u8	port_num;
+	u8	responding;
+	u8	fast_path;
+	u32	nvme_mdts;
+	u16	enclosure_handle;
+	u64	enclosure_logical_id;
+	u8	enclosure_level;
+	u8	connector_name[4];
+	u8	*serial_number;
+	u8	reset_timeout;
+	u8	access_status;
+	u16	shutdown_latency;
+	struct kref refcount;
+};
+/**
+ * pcie_device_get - Increment the pcie device reference count
+ *
+ * @p: pcie_device object
+ *
+ * When ever this function called it will increment the
+ * reference count of the pcie device for which this function called.
+ *
+ */
+static inline void pcie_device_get(struct _pcie_device *p)
+{
+	kref_get(&p->refcount);
+}
+
+/**
+ * pcie_device_free - Release the pcie device object
+ * @r - kref object
+ *
+ * Free's the pcie device object. It will be called when reference count
+ * reaches to zero.
+ */
+static inline void pcie_device_free(struct kref *r)
+{
+	kfree(container_of(r, struct _pcie_device, refcount));
+}
+
+/**
+ * pcie_device_put - Decrement the pcie device reference count
+ *
+ * @p: pcie_device object
+ *
+ * When ever this function called it will decrement the
+ * reference count of the pcie device for which this function called.
+ *
+ * When refernce count reaches to Zero, this will call pcie_device_free to the
+ * pcie_device object.
+ */
+static inline void pcie_device_put(struct _pcie_device *p)
+{
+	kref_put(&p->refcount, pcie_device_free);
+}
+/**
+ * struct _raid_device - raid volume link list
+ * @list: sas device list
+ * @starget: starget object
+ * @sdev: scsi device struct (volumes are single lun)
+ * @wwid: unique identifier for the volume
+ * @handle: device handle
+ * @block_size: Block size of the volume
+ * @id: target id
+ * @channel: target channel
+ * @volume_type: the raid level
+ * @device_info: bitfield provides detailed info about the hidden components
+ * @num_pds: number of hidden raid components
+ * @responding: used in _scsih_raid_device_mark_responding
+ * @percent_complete: resync percent complete
+ * @direct_io_enabled: Whether direct io to PDs are allowed or not
+ * @stripe_exponent: X where 2powX is the stripe sz in blocks
+ * @block_exponent: X where 2powX is the block sz in bytes
+ * @max_lba: Maximum number of LBA in the volume
+ * @stripe_sz: Stripe Size of the volume
+ * @device_info: Device info of the volume member disk
+ * @pd_handle: Array of handles of the physical drives for direct I/O in le16
+ */
+#define MPT_MAX_WARPDRIVE_PDS		8
+struct _raid_device {
+	struct list_head list;
+	struct scsi_target *starget;
+	struct scsi_device *sdev;
+	u64	wwid;
+	u16	handle;
+	u16	block_sz;
+	int	id;
+	int	channel;
+	u8	volume_type;
+	u8	num_pds;
+	u8	responding;
+	u8	percent_complete;
+	u8	direct_io_enabled;
+	u8	stripe_exponent;
+	u8	block_exponent;
+	u64	max_lba;
+	u32	stripe_sz;
+	u32	device_info;
+	u16	pd_handle[MPT_MAX_WARPDRIVE_PDS];
+};
+
+/**
+ * struct _boot_device - boot device info
+ *
+ * @channel: sas, raid, or pcie channel
+ * @device: holds pointer for struct _sas_device, struct _raid_device or
+ *     struct _pcie_device
+ */
+struct _boot_device {
+	int channel;
+	void *device;
+};
+
+/**
+ * struct _sas_port - wide/narrow sas port information
+ * @port_list: list of ports belonging to expander
+ * @num_phys: number of phys belonging to this port
+ * @remote_identify: attached device identification
+ * @rphy: sas transport rphy object
+ * @port: sas transport wide/narrow port object
+ * @hba_port: hba port entry containing port's port number info
+ * @phy_list: _sas_phy list objects belonging to this port
+ */
+struct _sas_port {
+	struct list_head port_list;
+	u8	num_phys;
+	struct sas_identify remote_identify;
+	struct sas_rphy *rphy;
+	struct sas_port *port;
+	struct hba_port *hba_port;
+	struct list_head phy_list;
+};
+
+/**
+ * struct _sas_phy - phy information
+ * @port_siblings: list of phys belonging to a port
+ * @identify: phy identification
+ * @remote_identify: attached device identification
+ * @phy: sas transport phy object
+ * @phy_id: unique phy id
+ * @handle: device handle for this phy
+ * @attached_handle: device handle for attached device
+ * @phy_belongs_to_port: port has been created for this phy
+ * @port: hba port entry containing port number info
+ */
+struct _sas_phy {
+	struct list_head port_siblings;
+	struct sas_identify identify;
+	struct sas_identify remote_identify;
+	struct sas_phy *phy;
+	u8	phy_id;
+	u16	handle;
+	u16	attached_handle;
+	u8	phy_belongs_to_port;
+	u8	hba_vphy;
+	struct hba_port *port;
+};
+
+/**
+ * struct _sas_node - sas_host/expander information
+ * @list: list of expanders
+ * @parent_dev: parent device class
+ * @num_phys: number phys belonging to this sas_host/expander
+ * @sas_address: sas address of this sas_host/expander
+ * @handle: handle for this sas_host/expander
+ * @sas_address_parent: sas address of parent expander or sas host
+ * @enclosure_handle: handle for this a member of an enclosure
+ * @device_info: bitwise defining capabilities of this sas_host/expander
+ * @responding: used in _scsih_expander_device_mark_responding
+ * @nr_phys_allocated: Allocated memory for this many count phys
+ * @phy: a list of phys that make up this sas_host/expander
+ * @sas_port_list: list of ports attached to this sas_host/expander
+ * @port: hba port entry containing node's port number info
+ * @rphy: sas_rphy object of this expander
+ */
+struct _sas_node {
+	struct list_head list;
+	struct device *parent_dev;
+	u8	num_phys;
+	u64	sas_address;
+	u16	handle;
+	u64	sas_address_parent;
+	u16	enclosure_handle;
+	u64	enclosure_logical_id;
+	u8	responding;
+	u8	nr_phys_allocated;
+	struct hba_port *port;
+	struct	_sas_phy *phy;
+	struct list_head sas_port_list;
+	struct sas_rphy *rphy;
+};
+
+/**
+ * struct _enclosure_node - enclosure information
+ * @list: list of enclosures
+ * @pg0: enclosure pg0;
+ */
+struct _enclosure_node {
+	struct list_head list;
+	Mpi2SasEnclosurePage0_t pg0;
+};
+
+/**
+ * enum reset_type - reset state
+ * @FORCE_BIG_HAMMER: issue diagnostic reset
+ * @SOFT_RESET: issue message_unit_reset, if fails to to big hammer
+ */
+enum reset_type {
+	FORCE_BIG_HAMMER,
+	SOFT_RESET,
+};
+
+/**
+ * struct pcie_sg_list - PCIe SGL buffer (contiguous per I/O)
+ * @pcie_sgl: PCIe native SGL for NVMe devices
+ * @pcie_sgl_dma: physical address
+ */
+struct pcie_sg_list {
+	void            *pcie_sgl;
+	dma_addr_t      pcie_sgl_dma;
+};
+
+/**
+ * struct chain_tracker - firmware chain tracker
+ * @chain_buffer: chain buffer
+ * @chain_buffer_dma: physical address
+ * @tracker_list: list of free request (ioc->free_chain_list)
+ */
+struct chain_tracker {
+	void *chain_buffer;
+	dma_addr_t chain_buffer_dma;
+};
+
+struct chain_lookup {
+	struct chain_tracker *chains_per_smid;
+	atomic_t	chain_offset;
+};
+
+/**
+ * struct scsiio_tracker - scsi mf request tracker
+ * @smid: system message id
+ * @cb_idx: callback index
+ * @direct_io: To indicate whether I/O is direct (WARPDRIVE)
+ * @chain_list: list of associated firmware chain tracker
+ * @msix_io: IO's msix
+ */
+struct scsiio_tracker {
+	u16	smid;
+	struct scsi_cmnd *scmd;
+	u8	cb_idx;
+	u8	direct_io;
+	struct pcie_sg_list pcie_sg_list;
+	struct list_head chain_list;
+	u16     msix_io;
+};
+
+/**
+ * struct request_tracker - firmware request tracker
+ * @smid: system message id
+ * @cb_idx: callback index
+ * @tracker_list: list of free request (ioc->free_list)
+ */
+struct request_tracker {
+	u16	smid;
+	u8	cb_idx;
+	struct list_head tracker_list;
+};
+
+/**
+ * struct _tr_list - target reset list
+ * @handle: device handle
+ * @state: state machine
+ */
+struct _tr_list {
+	struct list_head list;
+	u16	handle;
+	u16	state;
+};
+
+/**
+ * struct _sc_list - delayed SAS_IO_UNIT_CONTROL message list
+ * @handle: device handle
+ */
+struct _sc_list {
+	struct list_head list;
+	u16     handle;
+};
+
+/**
+ * struct _event_ack_list - delayed event acknowledgment list
+ * @Event: Event ID
+ * @EventContext: used to track the event uniquely
+ */
+struct _event_ack_list {
+	struct list_head list;
+	U16     Event;
+	U32     EventContext;
+};
+
+/**
+ * struct adapter_reply_queue - the reply queue struct
+ * @ioc: per adapter object
+ * @msix_index: msix index into vector table
+ * @vector: irq vector
+ * @reply_post_host_index: head index in the pool where FW completes IO
+ * @reply_post_free: reply post base virt address
+ * @name: the name registered to request_irq()
+ * @busy: isr is actively processing replies on another cpu
+ * @os_irq: irq number
+ * @irqpoll: irq_poll object
+ * @irq_poll_scheduled: Tells whether irq poll is scheduled or not
+ * @is_iouring_poll_q: Tells whether reply queues is assigned
+ *			to io uring poll queues or not
+ * @list: this list
+*/
+struct adapter_reply_queue {
+	struct MPT3SAS_ADAPTER	*ioc;
+	u8			msix_index;
+	u32			reply_post_host_index;
+	Mpi2ReplyDescriptorsUnion_t *reply_post_free;
+	char			name[MPT_NAME_LENGTH];
+	atomic_t		busy;
+	u32			os_irq;
+	struct irq_poll         irqpoll;
+	bool			irq_poll_scheduled;
+	bool			irq_line_enable;
+	bool			is_iouring_poll_q;
+	struct list_head	list;
+};
+
+/**
+ * struct io_uring_poll_queue - the io uring poll queue structure
+ * @busy: Tells whether io uring poll queue is busy or not
+ * @pause: Tells whether IOs are paused on io uring poll queue or not
+ * @reply_q: reply queue mapped for io uring poll queue
+ */
+struct io_uring_poll_queue {
+	atomic_t	busy;
+	atomic_t	pause;
+	struct adapter_reply_queue *reply_q;
+};
+
+typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr);
+
+/* SAS3.0 support */
+typedef int (*MPT_BUILD_SG_SCMD)(struct MPT3SAS_ADAPTER *ioc,
+	struct scsi_cmnd *scmd, u16 smid, struct _pcie_device *pcie_device);
+typedef void (*MPT_BUILD_SG)(struct MPT3SAS_ADAPTER *ioc, void *psge,
+		dma_addr_t data_out_dma, size_t data_out_sz,
+		dma_addr_t data_in_dma, size_t data_in_sz);
+typedef void (*MPT_BUILD_ZERO_LEN_SGE)(struct MPT3SAS_ADAPTER *ioc,
+		void *paddr);
+
+/* SAS3.5 support */
+typedef void (*NVME_BUILD_PRP)(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	Mpi26NVMeEncapsulatedRequest_t *nvme_encap_request,
+	dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma,
+	size_t data_in_sz);
+
+/* To support atomic and non atomic descriptors*/
+typedef void (*PUT_SMID_IO_FP_HIP) (struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u16 funcdep);
+typedef void (*PUT_SMID_DEFAULT) (struct MPT3SAS_ADAPTER *ioc, u16 smid);
+typedef u32 (*BASE_READ_REG) (const void __iomem *addr);
+/*
+ * To get high iops reply queue's msix index when high iops mode is enabled
+ * else get the msix index of general reply queues.
+ */
+typedef u8 (*GET_MSIX_INDEX) (struct MPT3SAS_ADAPTER *ioc,
+	struct scsi_cmnd *scmd);
+
+/* IOC Facts and Port Facts converted from little endian to cpu */
+union mpi3_version_union {
+	MPI2_VERSION_STRUCT		Struct;
+	u32				Word;
+};
+
+struct mpt3sas_facts {
+	u16			MsgVersion;
+	u16			HeaderVersion;
+	u8			IOCNumber;
+	u8			VP_ID;
+	u8			VF_ID;
+	u16			IOCExceptions;
+	u16			IOCStatus;
+	u32			IOCLogInfo;
+	u8			MaxChainDepth;
+	u8			WhoInit;
+	u8			NumberOfPorts;
+	u8			MaxMSIxVectors;
+	u16			RequestCredit;
+	u16			ProductID;
+	u32			IOCCapabilities;
+	union mpi3_version_union	FWVersion;
+	u16			IOCRequestFrameSize;
+	u16			IOCMaxChainSegmentSize;
+	u16			MaxInitiators;
+	u16			MaxTargets;
+	u16			MaxSasExpanders;
+	u16			MaxEnclosures;
+	u16			ProtocolFlags;
+	u16			HighPriorityCredit;
+	u16			MaxReplyDescriptorPostQueueDepth;
+	u8			ReplyFrameSize;
+	u8			MaxVolumes;
+	u16			MaxDevHandle;
+	u16			MaxPersistentEntries;
+	u16			MinDevHandle;
+	u8			CurrentHostPageSize;
+};
+
+struct mpt3sas_port_facts {
+	u8			PortNumber;
+	u8			VP_ID;
+	u8			VF_ID;
+	u8			PortType;
+	u16			MaxPostedCmdBuffers;
+};
+
+struct reply_post_struct {
+	Mpi2ReplyDescriptorsUnion_t	*reply_post_free;
+	dma_addr_t			reply_post_free_dma;
+};
+
+/**
+ * struct virtual_phy - vSES phy structure
+ * sas_address: SAS Address of vSES device
+ * phy_mask: vSES device's phy number
+ * flags: flags used to manage this structure
+ */
+struct virtual_phy {
+	struct	list_head list;
+	u64	sas_address;
+	u32	phy_mask;
+	u8	flags;
+};
+
+#define MPT_VPHY_FLAG_DIRTY_PHY	0x01
+
+/**
+ * struct hba_port - Saves each HBA's Wide/Narrow port info
+ * @sas_address: sas address of this wide/narrow port's attached device
+ * @phy_mask: HBA PHY's belonging to this port
+ * @port_id: port number
+ * @flags: hba port flags
+ * @vphys_mask : mask of vSES devices Phy number
+ * @vphys_list : list containing vSES device structures
+ */
+struct hba_port {
+	struct list_head list;
+	u64	sas_address;
+	u32	phy_mask;
+	u8      port_id;
+	u8	flags;
+	u32	vphys_mask;
+	struct list_head vphys_list;
+};
+
+/* hba port flags */
+#define HBA_PORT_FLAG_DIRTY_PORT       0x01
+#define HBA_PORT_FLAG_NEW_PORT         0x02
+
+#define MULTIPATH_DISABLED_PORT_ID     0xFF
+
+/**
+ * struct htb_rel_query - diagnostic buffer release reason
+ * @unique_id - unique id associated with this buffer.
+ * @buffer_rel_condition - Release condition ioctl/sysfs/reset
+ * @reserved
+ * @trigger_type - Master/Event/scsi/MPI
+ * @trigger_info_dwords - Data Correspondig to trigger type
+ */
+struct htb_rel_query {
+	u16	buffer_rel_condition;
+	u16	reserved;
+	u32	trigger_type;
+	u32	trigger_info_dwords[2];
+};
+
+/* Buffer_rel_condition bit fields */
+
+/* Bit 0 - Diag Buffer not Released */
+#define MPT3_DIAG_BUFFER_NOT_RELEASED	(0x00)
+/* Bit 0 - Diag Buffer Released */
+#define MPT3_DIAG_BUFFER_RELEASED	(0x01)
+
+/*
+ * Bit 1 - Diag Buffer Released by IOCTL,
+ * This bit is valid only if Bit 0 is one
+ */
+#define MPT3_DIAG_BUFFER_REL_IOCTL	(0x02 | MPT3_DIAG_BUFFER_RELEASED)
+
+/*
+ * Bit 2 - Diag Buffer Released by Trigger,
+ * This bit is valid only if Bit 0 is one
+ */
+#define MPT3_DIAG_BUFFER_REL_TRIGGER	(0x04 | MPT3_DIAG_BUFFER_RELEASED)
+
+/*
+ * Bit 3 - Diag Buffer Released by SysFs,
+ * This bit is valid only if Bit 0 is one
+ */
+#define MPT3_DIAG_BUFFER_REL_SYSFS	(0x08 | MPT3_DIAG_BUFFER_RELEASED)
+
+/* DIAG RESET Master trigger flags */
+#define MPT_DIAG_RESET_ISSUED_BY_DRIVER 0x00000000
+#define MPT_DIAG_RESET_ISSUED_BY_USER	0x00000001
+
+typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
+/**
+ * struct MPT3SAS_ADAPTER - per adapter struct
+ * @list: ioc_list
+ * @shost: shost object
+ * @id: unique adapter id
+ * @cpu_count: number online cpus
+ * @name: generic ioc string
+ * @tmp_string: tmp string used for logging
+ * @pdev: pci pdev object
+ * @pio_chip: physical io register space
+ * @chip: memory mapped register space
+ * @chip_phys: physical addrss prior to mapping
+ * @logging_level: see mpt3sas_debug.h
+ * @fwfault_debug: debuging FW timeouts
+ * @ir_firmware: IR firmware present
+ * @bars: bitmask of BAR's that must be configured
+ * @mask_interrupts: ignore interrupt
+ * @pci_access_mutex: Mutex to synchronize ioctl, sysfs show path and
+ *			pci resource handling
+ * @fault_reset_work_q_name: fw fault work queue
+ * @fault_reset_work_q: ""
+ * @fault_reset_work: ""
+ * @firmware_event_name: fw event work queue
+ * @firmware_event_thread: ""
+ * @fw_event_lock:
+ * @fw_event_list: list of fw events
+ * @current_evet: current processing firmware event
+ * @fw_event_cleanup: set to one while cleaning up the fw events
+ * @aen_event_read_flag: event log was read
+ * @broadcast_aen_busy: broadcast aen waiting to be serviced
+ * @shost_recovery: host reset in progress
+ * @ioc_reset_in_progress_lock:
+ * @ioc_link_reset_in_progress: phy/hard reset in progress
+ * @ignore_loginfos: ignore loginfos during task management
+ * @remove_host: flag for when driver unloads, to avoid sending dev resets
+ * @pci_error_recovery: flag to prevent ioc access until slot reset completes
+ * @wait_for_discovery_to_complete: flag set at driver load time when
+ *                                               waiting on reporting devices
+ * @is_driver_loading: flag set at driver load time
+ * @port_enable_failed: flag set when port enable has failed
+ * @start_scan: flag set from scan_start callback, cleared from _mpt3sas_fw_work
+ * @start_scan_failed: means port enable failed, return's the ioc_status
+ * @msix_enable: flag indicating msix is enabled
+ * @msix_vector_count: number msix vectors
+ * @cpu_msix_table: table for mapping cpus to msix index
+ * @cpu_msix_table_sz: table size
+ * @total_io_cnt: Gives total IO count, used to load balance the interrupts
+ * @ioc_coredump_loop: will have non-zero value when FW is in CoreDump state
+ * @timestamp_update_count: Counter to fire timeSync command
+ * time_sync_interval: Time sync interval read from man page 11
+ * @high_iops_outstanding: used to load balance the interrupts
+ *				within high iops reply queues
+ * @msix_load_balance: Enables load balancing of interrupts across
+ * the multiple MSIXs
+ * @schedule_dead_ioc_flush_running_cmds: callback to flush pending commands
+ * @thresh_hold: Max number of reply descriptors processed
+ *				before updating Host Index
+ * @iopoll_q_start_index: starting index of io uring poll queues
+ *				in reply queue list
+ * @drv_internal_flags: Bit map internal to driver
+ * @drv_support_bitmap: driver's supported feature bit map
+ * @use_32bit_dma: Flag to use 32 bit consistent dma mask
+ * @scsi_io_cb_idx: shost generated commands
+ * @tm_cb_idx: task management commands
+ * @scsih_cb_idx: scsih internal commands
+ * @transport_cb_idx: transport internal commands
+ * @ctl_cb_idx: clt internal commands
+ * @base_cb_idx: base internal commands
+ * @config_cb_idx: base internal commands
+ * @tm_tr_cb_idx : device removal target reset handshake
+ * @tm_tr_volume_cb_idx : volume removal target reset
+ * @base_cmds:
+ * @transport_cmds:
+ * @scsih_cmds:
+ * @tm_cmds:
+ * @ctl_cmds:
+ * @config_cmds:
+ * @base_add_sg_single: handler for either 32/64 bit sgl's
+ * @event_type: bits indicating which events to log
+ * @event_context: unique id for each logged event
+ * @event_log: event log pointer
+ * @event_masks: events that are masked
+ * @max_shutdown_latency: timeout value for NVMe shutdown operation,
+ *			which is equal that NVMe drive's RTD3 Entry Latency
+ *			which has reported maximum RTD3 Entry Latency value
+ *			among attached NVMe drives.
+ * @facts: static facts data
+ * @prev_fw_facts: previous fw facts data
+ * @pfacts: static port facts data
+ * @manu_pg0: static manufacturing page 0
+ * @manu_pg10: static manufacturing page 10
+ * @manu_pg11: static manufacturing page 11
+ * @bios_pg2: static bios page 2
+ * @bios_pg3: static bios page 3
+ * @ioc_pg8: static ioc page 8
+ * @iounit_pg0: static iounit page 0
+ * @iounit_pg1: static iounit page 1
+ * @iounit_pg8: static iounit page 8
+ * @sas_hba: sas host object
+ * @sas_expander_list: expander object list
+ * @enclosure_list: enclosure object list
+ * @sas_node_lock:
+ * @sas_device_list: sas device object list
+ * @sas_device_init_list: sas device object list (used only at init time)
+ * @sas_device_lock:
+ * @pcie_device_list: pcie device object list
+ * @pcie_device_init_list: pcie device object list (used only at init time)
+ * @pcie_device_lock:
+ * @io_missing_delay: time for IO completed by fw when PDR enabled
+ * @device_missing_delay: time for device missing by fw when PDR enabled
+ * @sas_id : used for setting volume target IDs
+ * @pcie_target_id: used for setting pcie target IDs
+ * @blocking_handles: bitmask used to identify which devices need blocking
+ * @pd_handles : bitmask for PD handles
+ * @pd_handles_sz : size of pd_handle bitmask
+ * @config_page_sz: config page size
+ * @config_page: reserve memory for config page payload
+ * @config_page_dma:
+ * @hba_queue_depth: hba request queue depth
+ * @sge_size: sg element size for either 32/64 bit
+ * @scsiio_depth: SCSI_IO queue depth
+ * @request_sz: per request frame size
+ * @request: pool of request frames
+ * @request_dma:
+ * @request_dma_sz:
+ * @scsi_lookup: firmware request tracker list
+ * @scsi_lookup_lock:
+ * @free_list: free list of request
+ * @pending_io_count:
+ * @reset_wq:
+ * @chain: pool of chains
+ * @chain_dma:
+ * @max_sges_in_main_message: number sg elements in main message
+ * @max_sges_in_chain_message: number sg elements per chain
+ * @chains_needed_per_io: max chains per io
+ * @chain_depth: total chains allocated
+ * @chain_segment_sz: gives the max number of
+ *			SGEs accommodate on single chain buffer
+ * @hi_priority_smid:
+ * @hi_priority:
+ * @hi_priority_dma:
+ * @hi_priority_depth:
+ * @hpr_lookup:
+ * @hpr_free_list:
+ * @internal_smid:
+ * @internal:
+ * @internal_dma:
+ * @internal_depth:
+ * @internal_lookup:
+ * @internal_free_list:
+ * @sense: pool of sense
+ * @sense_dma:
+ * @sense_dma_pool:
+ * @reply_depth: hba reply queue depth:
+ * @reply_sz: per reply frame size:
+ * @reply: pool of replys:
+ * @reply_dma:
+ * @reply_dma_pool:
+ * @reply_free_queue_depth: reply free depth
+ * @reply_free: pool for reply free queue (32 bit addr)
+ * @reply_free_dma:
+ * @reply_free_dma_pool:
+ * @reply_free_host_index: tail index in pool to insert free replys
+ * @reply_post_queue_depth: reply post queue depth
+ * @reply_post_struct: struct for reply_post_free physical & virt address
+ * @rdpq_array_capable: FW supports multiple reply queue addresses in ioc_init
+ * @rdpq_array_enable: rdpq_array support is enabled in the driver
+ * @rdpq_array_enable_assigned: this ensures that rdpq_array_enable flag
+ *				is assigned only ones
+ * @reply_queue_count: number of reply queue's
+ * @reply_queue_list: link list contaning the reply queue info
+ * @msix96_vector: 96 MSI-X vector support
+ * @replyPostRegisterIndex: index of next position in Reply Desc Post Queue
+ * @delayed_tr_list: target reset link list
+ * @delayed_tr_volume_list: volume target reset link list
+ * @delayed_sc_list:
+ * @delayed_event_ack_list:
+ * @temp_sensors_count: flag to carry the number of temperature sensors
+ * @pci_access_mutex: Mutex to synchronize ioctl,sysfs show path and
+ *	pci resource handling. PCI resource freeing will lead to free
+ *	vital hardware/memory resource, which might be in use by cli/sysfs
+ *	path functions resulting in Null pointer reference followed by kernel
+ *	crash. To avoid the above race condition we use mutex syncrhonization
+ *	which ensures the syncrhonization between cli/sysfs_show path.
+ * @atomic_desc_capable: Atomic Request Descriptor support.
+ * @GET_MSIX_INDEX: Get the msix index of high iops queues.
+ * @multipath_on_hba: flag to determine multipath on hba is enabled or not
+ * @port_table_list: list containing HBA's wide/narrow port's info
+ */
+struct MPT3SAS_ADAPTER {
+	struct list_head list;
+	struct Scsi_Host *shost;
+	u8		id;
+	int		cpu_count;
+	char		name[MPT_NAME_LENGTH];
+	char		driver_name[MPT_NAME_LENGTH - 8];
+	char		tmp_string[MPT_STRING_LENGTH];
+	struct pci_dev	*pdev;
+	Mpi2SystemInterfaceRegs_t __iomem *chip;
+	phys_addr_t	chip_phys;
+	int		logging_level;
+	int		fwfault_debug;
+	u8		ir_firmware;
+	int		bars;
+	u8		mask_interrupts;
+
+	/* fw fault handler */
+	char		fault_reset_work_q_name[20];
+	struct workqueue_struct *fault_reset_work_q;
+	struct delayed_work fault_reset_work;
+
+	/* fw event handler */
+	char		firmware_event_name[20];
+	struct workqueue_struct	*firmware_event_thread;
+	spinlock_t	fw_event_lock;
+	struct list_head fw_event_list;
+	struct fw_event_work	*current_event;
+	u8		fw_events_cleanup;
+
+	 /* misc flags */
+	int		aen_event_read_flag;
+	u8		broadcast_aen_busy;
+	u16		broadcast_aen_pending;
+	u8		shost_recovery;
+	u8		got_task_abort_from_ioctl;
+
+	struct mutex	reset_in_progress_mutex;
+	spinlock_t	ioc_reset_in_progress_lock;
+	u8		ioc_link_reset_in_progress;
+
+	u8		ignore_loginfos;
+	u8		remove_host;
+	u8		pci_error_recovery;
+	u8		wait_for_discovery_to_complete;
+	u8		is_driver_loading;
+	u8		port_enable_failed;
+	u8		start_scan;
+	u16		start_scan_failed;
+
+	u8		msix_enable;
+	u16		msix_vector_count;
+	u8		*cpu_msix_table;
+	u16		cpu_msix_table_sz;
+	resource_size_t __iomem **reply_post_host_index;
+	u32		ioc_reset_count;
+	MPT3SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds;
+	u32             non_operational_loop;
+	u8              ioc_coredump_loop;
+	u32		timestamp_update_count;
+	u32		time_sync_interval;
+	atomic64_t      total_io_cnt;
+	atomic64_t	high_iops_outstanding;
+	bool            msix_load_balance;
+	u16		thresh_hold;
+	u8		high_iops_queues;
+	u8		iopoll_q_start_index;
+	u32             drv_internal_flags;
+	u32		drv_support_bitmap;
+	u32             dma_mask;
+	bool		enable_sdev_max_qd;
+	bool		use_32bit_dma;
+	struct io_uring_poll_queue *io_uring_poll_queues;
+
+	/* internal commands, callback index */
+	u8		scsi_io_cb_idx;
+	u8		tm_cb_idx;
+	u8		transport_cb_idx;
+	u8		scsih_cb_idx;
+	u8		ctl_cb_idx;
+	u8		base_cb_idx;
+	u8		port_enable_cb_idx;
+	u8		config_cb_idx;
+	u8		tm_tr_cb_idx;
+	u8		tm_tr_volume_cb_idx;
+	u8		tm_sas_control_cb_idx;
+	struct _internal_cmd base_cmds;
+	struct _internal_cmd port_enable_cmds;
+	struct _internal_cmd transport_cmds;
+	struct _internal_cmd scsih_cmds;
+	struct _internal_cmd tm_cmds;
+	struct _internal_cmd ctl_cmds;
+	struct _internal_cmd config_cmds;
+
+	MPT_ADD_SGE	base_add_sg_single;
+
+	/* function ptr for either IEEE or MPI sg elements */
+	MPT_BUILD_SG_SCMD build_sg_scmd;
+	MPT_BUILD_SG    build_sg;
+	MPT_BUILD_ZERO_LEN_SGE build_zero_len_sge;
+	u16             sge_size_ieee;
+	u16		hba_mpi_version_belonged;
+
+	/* function ptr for MPI sg elements only */
+	MPT_BUILD_SG    build_sg_mpi;
+	MPT_BUILD_ZERO_LEN_SGE build_zero_len_sge_mpi;
+
+	/* function ptr for NVMe PRP elements only */
+	NVME_BUILD_PRP  build_nvme_prp;
+
+	/* event log */
+	u32		event_type[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
+	u32		event_context;
+	void		*event_log;
+	u32		event_masks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
+
+	u8		tm_custom_handling;
+	u8		nvme_abort_timeout;
+	u16		max_shutdown_latency;
+	u16		max_wideport_qd;
+	u16		max_narrowport_qd;
+	u16		max_nvme_qd;
+	u8		max_sata_qd;
+
+	/* static config pages */
+	struct mpt3sas_facts facts;
+	struct mpt3sas_facts prev_fw_facts;
+	struct mpt3sas_port_facts *pfacts;
+	Mpi2ManufacturingPage0_t manu_pg0;
+	struct Mpi2ManufacturingPage10_t manu_pg10;
+	struct Mpi2ManufacturingPage11_t manu_pg11;
+	Mpi2BiosPage2_t	bios_pg2;
+	Mpi2BiosPage3_t	bios_pg3;
+	Mpi2IOCPage8_t ioc_pg8;
+	Mpi2IOUnitPage0_t iounit_pg0;
+	Mpi2IOUnitPage1_t iounit_pg1;
+	Mpi2IOUnitPage8_t iounit_pg8;
+	Mpi2IOCPage1_t	ioc_pg1_copy;
+
+	struct _boot_device req_boot_device;
+	struct _boot_device req_alt_boot_device;
+	struct _boot_device current_boot_device;
+
+	/* sas hba, expander, and device list */
+	struct _sas_node sas_hba;
+	struct list_head sas_expander_list;
+	struct list_head enclosure_list;
+	spinlock_t	sas_node_lock;
+	struct list_head sas_device_list;
+	struct list_head sas_device_init_list;
+	spinlock_t	sas_device_lock;
+	struct list_head pcie_device_list;
+	struct list_head pcie_device_init_list;
+	spinlock_t      pcie_device_lock;
+
+	struct list_head raid_device_list;
+	spinlock_t	raid_device_lock;
+	u8		io_missing_delay;
+	u16		device_missing_delay;
+	int		sas_id;
+	int		pcie_target_id;
+
+	void		*blocking_handles;
+	void		*pd_handles;
+	u16		pd_handles_sz;
+
+	void		*pend_os_device_add;
+	u16		pend_os_device_add_sz;
+
+	/* config page */
+	u16		config_page_sz;
+	void		*config_page;
+	dma_addr_t	config_page_dma;
+	void		*config_vaddr;
+
+	/* scsiio request */
+	u16		hba_queue_depth;
+	u16		sge_size;
+	u16		scsiio_depth;
+	u16		request_sz;
+	u8		*request;
+	dma_addr_t	request_dma;
+	u32		request_dma_sz;
+	struct pcie_sg_list *pcie_sg_lookup;
+	spinlock_t	scsi_lookup_lock;
+	int		pending_io_count;
+	wait_queue_head_t reset_wq;
+	u16		*io_queue_num;
+
+	/* PCIe SGL */
+	struct dma_pool *pcie_sgl_dma_pool;
+	/* Host Page Size */
+	u32		page_size;
+
+	/* chain */
+	struct chain_lookup *chain_lookup;
+	struct list_head free_chain_list;
+	struct dma_pool *chain_dma_pool;
+	ulong		chain_pages;
+	u16		max_sges_in_main_message;
+	u16		max_sges_in_chain_message;
+	u16		chains_needed_per_io;
+	u32		chain_depth;
+	u16		chain_segment_sz;
+	u16		chains_per_prp_buffer;
+
+	/* hi-priority queue */
+	u16		hi_priority_smid;
+	u8		*hi_priority;
+	dma_addr_t	hi_priority_dma;
+	u16		hi_priority_depth;
+	struct request_tracker *hpr_lookup;
+	struct list_head hpr_free_list;
+
+	/* internal queue */
+	u16		internal_smid;
+	u8		*internal;
+	dma_addr_t	internal_dma;
+	u16		internal_depth;
+	struct request_tracker *internal_lookup;
+	struct list_head internal_free_list;
+
+	/* sense */
+	u8		*sense;
+	dma_addr_t	sense_dma;
+	struct dma_pool *sense_dma_pool;
+
+	/* reply */
+	u16		reply_sz;
+	u8		*reply;
+	dma_addr_t	reply_dma;
+	u32		reply_dma_max_address;
+	u32		reply_dma_min_address;
+	struct dma_pool *reply_dma_pool;
+
+	/* reply free queue */
+	u16		reply_free_queue_depth;
+	__le32		*reply_free;
+	dma_addr_t	reply_free_dma;
+	struct dma_pool *reply_free_dma_pool;
+	u32		reply_free_host_index;
+
+	/* reply post queue */
+	u16		reply_post_queue_depth;
+	struct reply_post_struct *reply_post;
+	u8		rdpq_array_capable;
+	u8		rdpq_array_enable;
+	u8		rdpq_array_enable_assigned;
+	struct dma_pool *reply_post_free_dma_pool;
+	struct dma_pool *reply_post_free_array_dma_pool;
+	Mpi2IOCInitRDPQArrayEntry *reply_post_free_array;
+	dma_addr_t reply_post_free_array_dma;
+	u8		reply_queue_count;
+	struct list_head reply_queue_list;
+
+	u8		combined_reply_queue;
+	u8		combined_reply_index_count;
+	u8		smp_affinity_enable;
+	/* reply post register index */
+	resource_size_t	__iomem **replyPostRegisterIndex;
+
+	struct list_head delayed_tr_list;
+	struct list_head delayed_tr_volume_list;
+	struct list_head delayed_sc_list;
+	struct list_head delayed_event_ack_list;
+	u8		temp_sensors_count;
+	struct mutex pci_access_mutex;
+
+	/* diag buffer support */
+	u8		*diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT];
+	u32		diag_buffer_sz[MPI2_DIAG_BUF_TYPE_COUNT];
+	dma_addr_t	diag_buffer_dma[MPI2_DIAG_BUF_TYPE_COUNT];
+	u8		diag_buffer_status[MPI2_DIAG_BUF_TYPE_COUNT];
+	u32		unique_id[MPI2_DIAG_BUF_TYPE_COUNT];
+	u32		product_specific[MPI2_DIAG_BUF_TYPE_COUNT][23];
+	u32		diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT];
+	u32		ring_buffer_offset;
+	u32		ring_buffer_sz;
+	struct htb_rel_query htb_rel;
+	u8 reset_from_user;
+	u8		is_warpdrive;
+	u8		is_mcpu_endpoint;
+	u8		hide_ir_msg;
+	u8		mfg_pg10_hide_flag;
+	u8		hide_drives;
+	spinlock_t	diag_trigger_lock;
+	u8		diag_trigger_active;
+	u8		atomic_desc_capable;
+	BASE_READ_REG	base_readl;
+	BASE_READ_REG	base_readl_ext_retry;
+	struct SL_WH_MASTER_TRIGGER_T diag_trigger_master;
+	struct SL_WH_EVENT_TRIGGERS_T diag_trigger_event;
+	struct SL_WH_SCSI_TRIGGERS_T diag_trigger_scsi;
+	struct SL_WH_MPI_TRIGGERS_T diag_trigger_mpi;
+	u8		supports_trigger_pages;
+	void		*device_remove_in_progress;
+	u16		device_remove_in_progress_sz;
+	u8		is_gen35_ioc;
+	u8		is_aero_ioc;
+	struct dentry	*debugfs_root;
+	struct dentry	*ioc_dump;
+	PUT_SMID_IO_FP_HIP put_smid_scsi_io;
+	PUT_SMID_IO_FP_HIP put_smid_fast_path;
+	PUT_SMID_IO_FP_HIP put_smid_hi_priority;
+	PUT_SMID_DEFAULT put_smid_default;
+	GET_MSIX_INDEX get_msix_index_for_smlio;
+
+	u8		multipath_on_hba;
+	struct list_head port_table_list;
+};
+
+struct mpt3sas_debugfs_buffer {
+	void	*buf;
+	u32	len;
+};
+
+#define MPT_DRV_SUPPORT_BITMAP_MEMMOVE 0x00000001
+#define MPT_DRV_SUPPORT_BITMAP_ADDNLQUERY	0x00000002
+
+#define MPT_DRV_INTERNAL_FIRST_PE_ISSUED		0x00000001
+
+typedef u8 (*MPT_CALLBACK)(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply);
+
+/*
+ * struct ATTO_SAS_NVRAM - ATTO NVRAM settings stored
+ *				in Manufacturing page 1 used to get
+ *				ATTO SasAddr.
+ */
+struct ATTO_SAS_NVRAM {
+	u8		Signature[4];
+	u8		Version;
+#define ATTO_SASNVR_VERSION		0
+
+	u8		Checksum;
+#define ATTO_SASNVR_CKSUM_SEED	0x5A
+	u8		Pad[10];
+	u8		SasAddr[8];
+#define ATTO_SAS_ADDR_ALIGN		64
+	u8		Reserved[232];
+};
+
+#define ATTO_SAS_ADDR_DEVNAME_BIAS		63
+
+union ATTO_SAS_ADDRESS {
+	U8		b[8];
+	U16		w[4];
+	U32		d[2];
+	U64		q;
+};
+
+/* base shared API */
+extern struct list_head mpt3sas_ioc_list;
+extern char    driver_name[MPT_NAME_LENGTH];
+/* spinlock on list operations over IOCs
+ * Case: when multiple warpdrive cards(IOCs) are in use
+ * Each IOC will added to the ioc list structure on initialization.
+ * Watchdog threads run at regular intervals to check IOC for any
+ * fault conditions which will trigger the dead_ioc thread to
+ * deallocate pci resource, resulting deleting the IOC netry from list,
+ * this deletion need to protected by spinlock to enusre that
+ * ioc removal is syncrhonized, if not synchronized it might lead to
+ * list_del corruption as the ioc list is traversed in cli path.
+ */
+extern spinlock_t gioc_lock;
+
+void mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_base_stop_watchdog(struct MPT3SAS_ADAPTER *ioc);
+
+int mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc);
+int mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_free_enclosure_list(struct MPT3SAS_ADAPTER *ioc);
+int mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc,
+	enum reset_type type);
+
+void *mpt3sas_base_get_msg_frame(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+void *mpt3sas_base_get_sense_buffer(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+__le32 mpt3sas_base_get_sense_buffer_dma(struct MPT3SAS_ADAPTER *ioc,
+	u16 smid);
+void *mpt3sas_base_get_pcie_sgl(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+dma_addr_t mpt3sas_base_get_pcie_sgl_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+void mpt3sas_base_sync_reply_irqs(struct MPT3SAS_ADAPTER *ioc, u8 poll);
+void mpt3sas_base_mask_interrupts(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_base_unmask_interrupts(struct MPT3SAS_ADAPTER *ioc);
+
+void mpt3sas_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u16 handle);
+void mpt3sas_base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u16 msix_task);
+void mpt3sas_base_put_smid_nvme_encap(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+void mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+/* hi-priority queue */
+u16 mpt3sas_base_get_smid_hpr(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx);
+u16 mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx,
+		struct scsi_cmnd *scmd);
+void mpt3sas_base_clear_st(struct MPT3SAS_ADAPTER *ioc,
+		struct scsiio_tracker *st);
+
+u16 mpt3sas_base_get_smid(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx);
+void mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+void mpt3sas_base_initialize_callback_handler(void);
+u8 mpt3sas_base_register_callback_handler(MPT_CALLBACK cb_func);
+void mpt3sas_base_release_callback_handler(u8 cb_idx);
+
+u8 mpt3sas_base_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply);
+u8 mpt3sas_port_enable_done(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u8 msix_index, u32 reply);
+void *mpt3sas_base_get_reply_virt_addr(struct MPT3SAS_ADAPTER *ioc,
+	u32 phys_addr);
+
+u32 mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked);
+
+void mpt3sas_base_fault_info(struct MPT3SAS_ADAPTER *ioc , u16 fault_code);
+#define mpt3sas_print_fault_code(ioc, fault_code) \
+do { pr_err("%s fault info from func: %s\n", ioc->name, __func__); \
+	mpt3sas_base_fault_info(ioc, fault_code); } while (0)
+
+void mpt3sas_base_coredump_info(struct MPT3SAS_ADAPTER *ioc, u16 fault_code);
+#define mpt3sas_print_coredump_info(ioc, fault_code) \
+do { pr_err("%s fault info from func: %s\n", ioc->name, __func__); \
+	mpt3sas_base_coredump_info(ioc, fault_code); } while (0)
+
+int mpt3sas_base_wait_for_coredump_completion(struct MPT3SAS_ADAPTER *ioc,
+		const char *caller);
+int mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2SasIoUnitControlReply_t *mpi_reply,
+	Mpi2SasIoUnitControlRequest_t *mpi_request);
+int mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request);
+
+void mpt3sas_base_validate_event_type(struct MPT3SAS_ADAPTER *ioc,
+	u32 *event_type);
+
+void mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc);
+
+void mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc,
+	u16 device_missing_delay, u8 io_missing_delay);
+
+int mpt3sas_base_check_for_fault_and_issue_reset(
+	struct MPT3SAS_ADAPTER *ioc);
+
+int mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc);
+
+void
+mpt3sas_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc);
+
+u8 mpt3sas_base_check_cmd_timeout(struct MPT3SAS_ADAPTER *ioc,
+	u8 status, void *mpi_request, int sz);
+#define mpt3sas_check_cmd_timeout(ioc, status, mpi_request, sz, issue_reset) \
+do {	ioc_err(ioc, "In func: %s\n", __func__); \
+	issue_reset = mpt3sas_base_check_cmd_timeout(ioc, \
+	status, mpi_request, sz); } while (0)
+
+int mpt3sas_wait_for_ioc(struct MPT3SAS_ADAPTER *ioc, int wait_count);
+int mpt3sas_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, enum reset_type type);
+void mpt3sas_base_free_irq(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_base_disable_msix(struct MPT3SAS_ADAPTER *ioc);
+int mpt3sas_blk_mq_poll(struct Scsi_Host *shost, unsigned int queue_num);
+void mpt3sas_base_pause_mq_polling(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_base_resume_mq_polling(struct MPT3SAS_ADAPTER *ioc);
+
+/* scsih shared API */
+struct scsi_cmnd *mpt3sas_scsih_scsi_lookup_get(struct MPT3SAS_ADAPTER *ioc,
+	u16 smid);
+u8 mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
+	u32 reply);
+void mpt3sas_scsih_pre_reset_handler(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_scsih_clear_outstanding_scsi_tm_commands(
+	struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_scsih_reset_done_handler(struct MPT3SAS_ADAPTER *ioc);
+
+int mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	uint channel, uint id, u64 lun, u8 type, u16 smid_task,
+	u16 msix_task, u8 timeout, u8 tr_method);
+int mpt3sas_scsih_issue_locked_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	uint channel, uint id, u64 lun, u8 type, u16 smid_task,
+	u16 msix_task, u8 timeout, u8 tr_method);
+
+void mpt3sas_scsih_set_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle);
+void mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle);
+void mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
+	struct hba_port *port);
+void mpt3sas_device_remove_by_sas_address(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address, struct hba_port *port);
+u8 mpt3sas_check_for_pending_internal_cmds(struct MPT3SAS_ADAPTER *ioc,
+	u16 smid);
+struct hba_port *
+mpt3sas_get_port_by_id(struct MPT3SAS_ADAPTER *ioc, u8 port,
+	u8 bypass_dirty_port_flag);
+
+struct _sas_node *mpt3sas_scsih_expander_find_by_handle(
+	struct MPT3SAS_ADAPTER *ioc, u16 handle);
+struct _sas_node *mpt3sas_scsih_expander_find_by_sas_address(
+	struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
+	struct hba_port *port);
+struct _sas_device *mpt3sas_get_sdev_by_addr(
+	 struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
+	 struct hba_port *port);
+struct _sas_device *__mpt3sas_get_sdev_by_addr(
+	 struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
+	 struct hba_port *port);
+struct _sas_device *mpt3sas_get_sdev_by_handle(struct MPT3SAS_ADAPTER *ioc,
+	u16 handle);
+struct _pcie_device *mpt3sas_get_pdev_by_handle(struct MPT3SAS_ADAPTER *ioc,
+	u16 handle);
+
+void mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc);
+struct _raid_device *
+mpt3sas_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle);
+void mpt3sas_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth);
+struct _sas_device *
+__mpt3sas_get_sdev_by_rphy(struct MPT3SAS_ADAPTER *ioc, struct sas_rphy *rphy);
+struct virtual_phy *
+mpt3sas_get_vphy_by_phy(struct MPT3SAS_ADAPTER *ioc,
+	struct hba_port *port, u32 phy);
+
+/* config shared API */
+u8 mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply);
+int mpt3sas_config_get_number_hba_phys(struct MPT3SAS_ADAPTER *ioc,
+	u8 *num_phys);
+int mpt3sas_config_get_manufacturing_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page);
+int mpt3sas_config_get_manufacturing_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage1_t *config_page);
+
+int mpt3sas_config_get_manufacturing_pg7(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage7_t *config_page,
+	u16 sz);
+int mpt3sas_config_get_manufacturing_pg10(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply,
+	struct Mpi2ManufacturingPage10_t *config_page);
+
+int mpt3sas_config_get_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply,
+	struct Mpi2ManufacturingPage11_t  *config_page);
+int mpt3sas_config_set_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply,
+	struct Mpi2ManufacturingPage11_t *config_page);
+
+int mpt3sas_config_get_bios_pg2(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2BiosPage2_t *config_page);
+int mpt3sas_config_get_bios_pg3(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2BiosPage3_t *config_page);
+int mpt3sas_config_set_bios_pg4(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage4_t *config_page,
+	int sz_config_page);
+int mpt3sas_config_get_bios_pg4(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage4_t *config_page,
+	int sz_config_page);
+int mpt3sas_config_get_iounit_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2IOUnitPage0_t *config_page);
+int mpt3sas_config_get_sas_device_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage0_t *config_page,
+	u32 form, u32 handle);
+int mpt3sas_config_get_sas_device_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage1_t *config_page,
+	u32 form, u32 handle);
+int mpt3sas_config_get_pcie_device_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage0_t *config_page,
+	u32 form, u32 handle);
+int mpt3sas_config_get_pcie_device_pg2(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage2_t *config_page,
+	u32 form, u32 handle);
+int mpt3sas_config_get_pcie_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeIOUnitPage1_t *config_page,
+	u16 sz);
+int mpt3sas_config_get_sas_iounit_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage0_t *config_page,
+	u16 sz);
+int mpt3sas_config_get_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2IOUnitPage1_t *config_page);
+int mpt3sas_config_get_iounit_pg3(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz);
+int mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2IOUnitPage1_t *config_page);
+int mpt3sas_config_get_iounit_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2IOUnitPage8_t *config_page);
+int mpt3sas_config_get_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page,
+	u16 sz);
+int mpt3sas_config_set_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page,
+	u16 sz);
+int mpt3sas_config_get_ioc_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2IOCPage1_t *config_page);
+int mpt3sas_config_set_ioc_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2IOCPage1_t *config_page);
+int mpt3sas_config_get_ioc_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2IOCPage8_t *config_page);
+int mpt3sas_config_get_expander_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2ExpanderPage0_t *config_page,
+	u32 form, u32 handle);
+int mpt3sas_config_get_expander_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2ExpanderPage1_t *config_page,
+	u32 phy_number, u16 handle);
+int mpt3sas_config_get_enclosure_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasEnclosurePage0_t *config_page,
+	u32 form, u32 handle);
+int mpt3sas_config_get_phy_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number);
+int mpt3sas_config_get_phy_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number);
+int mpt3sas_config_get_raid_volume_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form,
+	u32 handle);
+int mpt3sas_config_get_number_pds(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	u8 *num_pds);
+int mpt3sas_config_get_raid_volume_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form,
+	u32 handle, u16 sz);
+int mpt3sas_config_get_phys_disk_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page,
+	u32 form, u32 form_specific);
+int mpt3sas_config_get_volume_handle(struct MPT3SAS_ADAPTER *ioc, u16 pd_handle,
+	u16 *volume_handle);
+int mpt3sas_config_get_volume_wwid(struct MPT3SAS_ADAPTER *ioc,
+	u16 volume_handle, u64 *wwid);
+int
+mpt3sas_config_get_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage0_t *config_page);
+int
+mpt3sas_config_get_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage1_t *config_page);
+int
+mpt3sas_config_get_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage2_t *config_page);
+int
+mpt3sas_config_get_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage3_t *config_page);
+int
+mpt3sas_config_get_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage4_t *config_page);
+int
+mpt3sas_config_update_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_MASTER_TRIGGER_T *master_tg, bool set);
+int
+mpt3sas_config_update_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_EVENT_TRIGGERS_T *event_tg, bool set);
+int
+mpt3sas_config_update_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_SCSI_TRIGGERS_T *scsi_tg, bool set);
+int
+mpt3sas_config_update_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_MPI_TRIGGERS_T *mpi_tg, bool set);
+
+/* ctl shared API */
+extern const struct attribute_group *mpt3sas_host_groups[];
+extern const struct attribute_group *mpt3sas_dev_groups[];
+void mpt3sas_ctl_init(ushort hbas_to_enumerate);
+void mpt3sas_ctl_exit(ushort hbas_to_enumerate);
+u8 mpt3sas_ctl_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply);
+void mpt3sas_ctl_pre_reset_handler(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_ctl_clear_outstanding_ioctls(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_ctl_reset_done_handler(struct MPT3SAS_ADAPTER *ioc);
+u8 mpt3sas_ctl_event_callback(struct MPT3SAS_ADAPTER *ioc,
+	u8 msix_index, u32 reply);
+void mpt3sas_ctl_add_to_event_log(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventNotificationReply_t *mpi_reply);
+
+void mpt3sas_enable_diag_buffer(struct MPT3SAS_ADAPTER *ioc,
+	u8 bits_to_register);
+int mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type,
+	u8 *issue_reset);
+
+/* transport shared API */
+extern struct scsi_transport_template *mpt3sas_transport_template;
+u8 mpt3sas_transport_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply);
+struct _sas_port *mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc,
+	u16 handle, u64 sas_address, struct hba_port *port);
+void mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
+	u64 sas_address_parent, struct hba_port *port);
+int mpt3sas_transport_add_host_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy
+	*mpt3sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev);
+int mpt3sas_transport_add_expander_phy(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_phy *mpt3sas_phy, Mpi2ExpanderPage1_t expander_pg1,
+	struct device *parent_dev);
+void mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address, u16 handle, u8 phy_number, u8 link_rate,
+	struct hba_port *port);
+extern struct sas_function_template mpt3sas_transport_functions;
+extern struct scsi_transport_template *mpt3sas_transport_template;
+void
+mpt3sas_transport_del_phy_from_an_existing_port(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy);
+void
+mpt3sas_transport_add_phy_to_an_existing_port(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy,
+	u64 sas_address, struct hba_port *port);
+/* trigger data externs */
+void mpt3sas_send_trigger_data_event(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data);
+void mpt3sas_process_trigger_data(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data);
+void mpt3sas_trigger_master(struct MPT3SAS_ADAPTER *ioc,
+	u32 trigger_bitmask);
+void mpt3sas_trigger_event(struct MPT3SAS_ADAPTER *ioc, u16 event,
+	u16 log_entry_qualifier);
+void mpt3sas_trigger_scsi(struct MPT3SAS_ADAPTER *ioc, u8 sense_key,
+	u8 asc, u8 ascq);
+void mpt3sas_trigger_mpi(struct MPT3SAS_ADAPTER *ioc, u16 ioc_status,
+	u32 loginfo);
+
+/* warpdrive APIs */
+u8 mpt3sas_get_num_volumes(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc,
+	struct _raid_device *raid_device);
+void
+mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
+	struct _raid_device *raid_device, Mpi25SCSIIORequest_t *mpi_request);
+
+/* NCQ Prio Handling Check */
+bool scsih_ncq_prio_supp(struct scsi_device *sdev);
+
+void mpt3sas_setup_debugfs(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_destroy_debugfs(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_init_debugfs(void);
+void mpt3sas_exit_debugfs(void);
+
+/**
+ * _scsih_is_pcie_scsi_device - determines if device is an pcie scsi device
+ * @device_info: bitfield providing information about the device.
+ * Context: none
+ *
+ * Returns 1 if scsi device.
+ */
+static inline int
+mpt3sas_scsih_is_pcie_scsi_device(u32 device_info)
+{
+	if ((device_info &
+	    MPI26_PCIE_DEVINFO_MASK_DEVICE_TYPE) == MPI26_PCIE_DEVINFO_SCSI)
+		return 1;
+	else
+		return 0;
+}
+#endif /* MPT3SAS_BASE_H_INCLUDED */
diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c
new file mode 100644
index 0000000000..d114ef381c
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@@ -0,0 +1,2794 @@
+/*
+ * This module provides common API for accessing firmware configuration pages
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c
+ * Copyright (C) 2012-2014  LSI Corporation
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/blkdev.h>
+#include <linux/sched.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+
+#include "mpt3sas_base.h"
+
+/* local definitions */
+
+/* Timeout for config page request (in seconds) */
+#define MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT 15
+
+/* Common sgl flags for READING a config page. */
+#define MPT3_CONFIG_COMMON_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \
+	MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \
+	| MPI2_SGE_FLAGS_END_OF_LIST) << MPI2_SGE_FLAGS_SHIFT)
+
+/* Common sgl flags for WRITING a config page. */
+#define MPT3_CONFIG_COMMON_WRITE_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \
+	MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \
+	| MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC) \
+	<< MPI2_SGE_FLAGS_SHIFT)
+
+/**
+ * struct config_request - obtain dma memory via routine
+ * @sz: size
+ * @page: virt pointer
+ * @page_dma: phys pointer
+ *
+ */
+struct config_request {
+	u16			sz;
+	void			*page;
+	dma_addr_t		page_dma;
+};
+
+/**
+ * _config_display_some_debug - debug routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @calling_function_name: string pass from calling function
+ * @mpi_reply: reply message frame
+ * Context: none.
+ *
+ * Function for displaying debug info helpful when debugging issues
+ * in this module.
+ */
+static void
+_config_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	char *calling_function_name, MPI2DefaultReply_t *mpi_reply)
+{
+	Mpi2ConfigRequest_t *mpi_request;
+	char *desc = NULL;
+
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	switch (mpi_request->Header.PageType & MPI2_CONFIG_PAGETYPE_MASK) {
+	case MPI2_CONFIG_PAGETYPE_IO_UNIT:
+		desc = "io_unit";
+		break;
+	case MPI2_CONFIG_PAGETYPE_IOC:
+		desc = "ioc";
+		break;
+	case MPI2_CONFIG_PAGETYPE_BIOS:
+		desc = "bios";
+		break;
+	case MPI2_CONFIG_PAGETYPE_RAID_VOLUME:
+		desc = "raid_volume";
+		break;
+	case MPI2_CONFIG_PAGETYPE_MANUFACTURING:
+		desc = "manufacturing";
+		break;
+	case MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK:
+		desc = "physdisk";
+		break;
+	case MPI2_CONFIG_PAGETYPE_EXTENDED:
+		switch (mpi_request->ExtPageType) {
+		case MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT:
+			desc = "sas_io_unit";
+			break;
+		case MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER:
+			desc = "sas_expander";
+			break;
+		case MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE:
+			desc = "sas_device";
+			break;
+		case MPI2_CONFIG_EXTPAGETYPE_SAS_PHY:
+			desc = "sas_phy";
+			break;
+		case MPI2_CONFIG_EXTPAGETYPE_LOG:
+			desc = "log";
+			break;
+		case MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE:
+			desc = "enclosure";
+			break;
+		case MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG:
+			desc = "raid_config";
+			break;
+		case MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING:
+			desc = "driver_mapping";
+			break;
+		case MPI2_CONFIG_EXTPAGETYPE_SAS_PORT:
+			desc = "sas_port";
+			break;
+		case MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING:
+			desc = "ext_manufacturing";
+			break;
+		case MPI2_CONFIG_EXTPAGETYPE_PCIE_IO_UNIT:
+			desc = "pcie_io_unit";
+			break;
+		case MPI2_CONFIG_EXTPAGETYPE_PCIE_SWITCH:
+			desc = "pcie_switch";
+			break;
+		case MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE:
+			desc = "pcie_device";
+			break;
+		case MPI2_CONFIG_EXTPAGETYPE_PCIE_LINK:
+			desc = "pcie_link";
+			break;
+		}
+		break;
+	}
+
+	if (!desc)
+		return;
+
+	ioc_info(ioc, "%s: %s(%d), action(%d), form(0x%08x), smid(%d)\n",
+		 calling_function_name, desc,
+		 mpi_request->Header.PageNumber, mpi_request->Action,
+		 le32_to_cpu(mpi_request->PageAddress), smid);
+
+	if (!mpi_reply)
+		return;
+
+	if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo)
+		ioc_info(ioc, "\tiocstatus(0x%04x), loginfo(0x%08x)\n",
+			 le16_to_cpu(mpi_reply->IOCStatus),
+			 le32_to_cpu(mpi_reply->IOCLogInfo));
+}
+
+/**
+ * _config_alloc_config_dma_memory - obtain physical memory
+ * @ioc: per adapter object
+ * @mem: struct config_request
+ *
+ * A wrapper for obtaining dma-able memory for config page request.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_config_alloc_config_dma_memory(struct MPT3SAS_ADAPTER *ioc,
+	struct config_request *mem)
+{
+	int r = 0;
+
+	if (mem->sz > ioc->config_page_sz) {
+		mem->page = dma_alloc_coherent(&ioc->pdev->dev, mem->sz,
+		    &mem->page_dma, GFP_KERNEL);
+		if (!mem->page) {
+			ioc_err(ioc, "%s: dma_alloc_coherent failed asking for (%d) bytes!!\n",
+				__func__, mem->sz);
+			r = -ENOMEM;
+		}
+	} else { /* use tmp buffer if less than 512 bytes */
+		mem->page = ioc->config_page;
+		mem->page_dma = ioc->config_page_dma;
+	}
+	ioc->config_vaddr = mem->page;
+	return r;
+}
+
+/**
+ * _config_free_config_dma_memory - wrapper to free the memory
+ * @ioc: per adapter object
+ * @mem: struct config_request
+ *
+ * A wrapper to free dma-able memory when using _config_alloc_config_dma_memory.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static void
+_config_free_config_dma_memory(struct MPT3SAS_ADAPTER *ioc,
+	struct config_request *mem)
+{
+	if (mem->sz > ioc->config_page_sz)
+		dma_free_coherent(&ioc->pdev->dev, mem->sz, mem->page,
+		    mem->page_dma);
+}
+
+/**
+ * mpt3sas_config_done - config page completion routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: none.
+ *
+ * The callback handler when using _config_request.
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *         0 means the mf is freed from this function.
+ */
+u8
+mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply)
+{
+	MPI2DefaultReply_t *mpi_reply;
+
+	if (ioc->config_cmds.status == MPT3_CMD_NOT_USED)
+		return 1;
+	if (ioc->config_cmds.smid != smid)
+		return 1;
+	ioc->config_cmds.status |= MPT3_CMD_COMPLETE;
+	mpi_reply =  mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	if (mpi_reply) {
+		ioc->config_cmds.status |= MPT3_CMD_REPLY_VALID;
+		memcpy(ioc->config_cmds.reply, mpi_reply,
+		    mpi_reply->MsgLength*4);
+	}
+	ioc->config_cmds.status &= ~MPT3_CMD_PENDING;
+	if (ioc->logging_level & MPT_DEBUG_CONFIG)
+		_config_display_some_debug(ioc, smid, "config_done", mpi_reply);
+	ioc->config_cmds.smid = USHRT_MAX;
+	complete(&ioc->config_cmds.done);
+	return 1;
+}
+
+/**
+ * _config_request - main routine for sending config page requests
+ * @ioc: per adapter object
+ * @mpi_request: request message frame
+ * @mpi_reply: reply mf payload returned from firmware
+ * @timeout: timeout in seconds
+ * @config_page: contents of the config page
+ * @config_page_sz: size of config page
+ * Context: sleep
+ *
+ * A generic API for config page requests to firmware.
+ *
+ * The ioc->config_cmds.status flag should be MPT3_CMD_NOT_USED before calling
+ * this API.
+ *
+ * The callback index is set inside `ioc->config_cb_idx.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
+	*mpi_request, Mpi2ConfigReply_t *mpi_reply, int timeout,
+	void *config_page, u16 config_page_sz)
+{
+	u16 smid;
+	Mpi2ConfigRequest_t *config_request;
+	int r;
+	u8 retry_count, issue_host_reset = 0;
+	struct config_request mem;
+	u32 ioc_status = UINT_MAX;
+
+	mutex_lock(&ioc->config_cmds.mutex);
+	if (ioc->config_cmds.status != MPT3_CMD_NOT_USED) {
+		ioc_err(ioc, "%s: config_cmd in use\n", __func__);
+		mutex_unlock(&ioc->config_cmds.mutex);
+		return -EAGAIN;
+	}
+
+	retry_count = 0;
+	memset(&mem, 0, sizeof(struct config_request));
+
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
+
+	if (config_page) {
+		mpi_request->Header.PageVersion = mpi_reply->Header.PageVersion;
+		mpi_request->Header.PageNumber = mpi_reply->Header.PageNumber;
+		mpi_request->Header.PageType = mpi_reply->Header.PageType;
+		mpi_request->Header.PageLength = mpi_reply->Header.PageLength;
+		mpi_request->ExtPageLength = mpi_reply->ExtPageLength;
+		mpi_request->ExtPageType = mpi_reply->ExtPageType;
+		if (mpi_request->Header.PageLength)
+			mem.sz = mpi_request->Header.PageLength * 4;
+		else
+			mem.sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4;
+		r = _config_alloc_config_dma_memory(ioc, &mem);
+		if (r != 0)
+			goto out;
+		if (mpi_request->Action ==
+		    MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT ||
+		    mpi_request->Action ==
+		    MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM) {
+			ioc->base_add_sg_single(&mpi_request->PageBufferSGE,
+			    MPT3_CONFIG_COMMON_WRITE_SGLFLAGS | mem.sz,
+			    mem.page_dma);
+			memcpy(mem.page, config_page, min_t(u16, mem.sz,
+			    config_page_sz));
+		} else {
+			memset(config_page, 0, config_page_sz);
+			ioc->base_add_sg_single(&mpi_request->PageBufferSGE,
+			    MPT3_CONFIG_COMMON_SGLFLAGS | mem.sz, mem.page_dma);
+			memset(mem.page, 0, min_t(u16, mem.sz, config_page_sz));
+		}
+	}
+
+ retry_config:
+	if (retry_count) {
+		if (retry_count > 2) { /* attempt only 2 retries */
+			r = -EFAULT;
+			goto free_mem;
+		}
+		ioc_info(ioc, "%s: attempting retry (%d)\n",
+			 __func__, retry_count);
+	}
+
+	r = mpt3sas_wait_for_ioc(ioc, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT);
+	if (r) {
+		if (r == -ETIME)
+			issue_host_reset = 1;
+		goto free_mem;
+	}
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->config_cb_idx);
+	if (!smid) {
+		ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
+		ioc->config_cmds.status = MPT3_CMD_NOT_USED;
+		r = -EAGAIN;
+		goto free_mem;
+	}
+
+	r = 0;
+	memset(ioc->config_cmds.reply, 0, sizeof(Mpi2ConfigReply_t));
+	ioc->config_cmds.status = MPT3_CMD_PENDING;
+	config_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->config_cmds.smid = smid;
+	memcpy(config_request, mpi_request, sizeof(Mpi2ConfigRequest_t));
+	if (ioc->logging_level & MPT_DEBUG_CONFIG)
+		_config_display_some_debug(ioc, smid, "config_request", NULL);
+	init_completion(&ioc->config_cmds.done);
+	ioc->put_smid_default(ioc, smid);
+	wait_for_completion_timeout(&ioc->config_cmds.done, timeout*HZ);
+	if (!(ioc->config_cmds.status & MPT3_CMD_COMPLETE)) {
+		if (!(ioc->logging_level & MPT_DEBUG_CONFIG))
+			_config_display_some_debug(ioc,
+			    smid, "config_request", NULL);
+		ioc_err(ioc, "%s: command timeout\n", __func__);
+		mpt3sas_base_check_cmd_timeout(ioc, ioc->config_cmds.status,
+				mpi_request, sizeof(Mpi2ConfigRequest_t) / 4);
+		retry_count++;
+		if (ioc->config_cmds.smid == smid)
+			mpt3sas_base_free_smid(ioc, smid);
+		if (ioc->config_cmds.status & MPT3_CMD_RESET)
+			goto retry_config;
+		if (ioc->shost_recovery || ioc->pci_error_recovery) {
+			issue_host_reset = 0;
+			r = -EFAULT;
+		} else
+			issue_host_reset = 1;
+		goto free_mem;
+	}
+
+	if (ioc->config_cmds.status & MPT3_CMD_REPLY_VALID) {
+		memcpy(mpi_reply, ioc->config_cmds.reply,
+		    sizeof(Mpi2ConfigReply_t));
+
+		/* Reply Frame Sanity Checks to workaround FW issues */
+		if ((mpi_request->Header.PageType & 0xF) !=
+		    (mpi_reply->Header.PageType & 0xF)) {
+			if (!(ioc->logging_level & MPT_DEBUG_CONFIG))
+				_config_display_some_debug(ioc,
+				    smid, "config_request", NULL);
+			_debug_dump_mf(mpi_request, ioc->request_sz/4);
+			_debug_dump_reply(mpi_reply, ioc->reply_sz/4);
+			panic("%s: %s: Firmware BUG: mpi_reply mismatch: Requested PageType(0x%02x) Reply PageType(0x%02x)\n",
+			      ioc->name, __func__,
+			      mpi_request->Header.PageType & 0xF,
+			      mpi_reply->Header.PageType & 0xF);
+		}
+
+		if (((mpi_request->Header.PageType & 0xF) ==
+		    MPI2_CONFIG_PAGETYPE_EXTENDED) &&
+		    mpi_request->ExtPageType != mpi_reply->ExtPageType) {
+			if (!(ioc->logging_level & MPT_DEBUG_CONFIG))
+				_config_display_some_debug(ioc,
+				    smid, "config_request", NULL);
+			_debug_dump_mf(mpi_request, ioc->request_sz/4);
+			_debug_dump_reply(mpi_reply, ioc->reply_sz/4);
+			panic("%s: %s: Firmware BUG: mpi_reply mismatch: Requested ExtPageType(0x%02x) Reply ExtPageType(0x%02x)\n",
+			      ioc->name, __func__,
+			      mpi_request->ExtPageType,
+			      mpi_reply->ExtPageType);
+		}
+		ioc_status = le16_to_cpu(mpi_reply->IOCStatus)
+		    & MPI2_IOCSTATUS_MASK;
+	}
+
+	if (retry_count)
+		ioc_info(ioc, "%s: retry (%d) completed!!\n",
+			 __func__, retry_count);
+
+	if ((ioc_status == MPI2_IOCSTATUS_SUCCESS) &&
+	    config_page && mpi_request->Action ==
+	    MPI2_CONFIG_ACTION_PAGE_READ_CURRENT) {
+		u8 *p = (u8 *)mem.page;
+
+		/* Config Page Sanity Checks to workaround FW issues */
+		if (p) {
+			if ((mpi_request->Header.PageType & 0xF) !=
+			    (p[3] & 0xF)) {
+				if (!(ioc->logging_level & MPT_DEBUG_CONFIG))
+					_config_display_some_debug(ioc,
+					    smid, "config_request", NULL);
+				_debug_dump_mf(mpi_request, ioc->request_sz/4);
+				_debug_dump_reply(mpi_reply, ioc->reply_sz/4);
+				_debug_dump_config(p, min_t(u16, mem.sz,
+				    config_page_sz)/4);
+				panic("%s: %s: Firmware BUG: config page mismatch: Requested PageType(0x%02x) Reply PageType(0x%02x)\n",
+				      ioc->name, __func__,
+				      mpi_request->Header.PageType & 0xF,
+				      p[3] & 0xF);
+			}
+
+			if (((mpi_request->Header.PageType & 0xF) ==
+			    MPI2_CONFIG_PAGETYPE_EXTENDED) &&
+			    (mpi_request->ExtPageType != p[6])) {
+				if (!(ioc->logging_level & MPT_DEBUG_CONFIG))
+					_config_display_some_debug(ioc,
+					    smid, "config_request", NULL);
+				_debug_dump_mf(mpi_request, ioc->request_sz/4);
+				_debug_dump_reply(mpi_reply, ioc->reply_sz/4);
+				_debug_dump_config(p, min_t(u16, mem.sz,
+				    config_page_sz)/4);
+				panic("%s: %s: Firmware BUG: config page mismatch: Requested ExtPageType(0x%02x) Reply ExtPageType(0x%02x)\n",
+				      ioc->name, __func__,
+				      mpi_request->ExtPageType, p[6]);
+			}
+		}
+		memcpy(config_page, mem.page, min_t(u16, mem.sz,
+		    config_page_sz));
+	}
+
+ free_mem:
+	if (config_page)
+		_config_free_config_dma_memory(ioc, &mem);
+ out:
+	ioc->config_cmds.status = MPT3_CMD_NOT_USED;
+	mutex_unlock(&ioc->config_cmds.mutex);
+
+	if (issue_host_reset) {
+		if (ioc->drv_internal_flags & MPT_DRV_INTERNAL_FIRST_PE_ISSUED) {
+			mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+			r = -EFAULT;
+		} else {
+			if (mpt3sas_base_check_for_fault_and_issue_reset(ioc))
+				return -EFAULT;
+			r = -EAGAIN;
+		}
+	}
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_manufacturing_pg0 - obtain manufacturing page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_manufacturing_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
+	mpi_request.Header.PageNumber = 0;
+	mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_manufacturing_pg1 - obtain manufacturing page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_manufacturing_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage1_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
+	mpi_request.Header.PageNumber = 1;
+	mpi_request.Header.PageVersion = MPI2_MANUFACTURING1_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+		MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+		MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+		sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_manufacturing_pg7 - obtain manufacturing page 7
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @sz: size of buffer passed in config_page
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_manufacturing_pg7(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage7_t *config_page,
+	u16 sz)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
+	mpi_request.Header.PageNumber = 7;
+	mpi_request.Header.PageVersion = MPI2_MANUFACTURING7_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sz);
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_manufacturing_pg10 - obtain manufacturing page 10
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_manufacturing_pg10(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply,
+	struct Mpi2ManufacturingPage10_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
+	mpi_request.Header.PageNumber = 10;
+	mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_manufacturing_pg11 - obtain manufacturing page 11
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply,
+	struct Mpi2ManufacturingPage11_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
+	mpi_request.Header.PageNumber = 11;
+	mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_set_manufacturing_pg11 - set manufacturing page 11
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_set_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply,
+	struct Mpi2ManufacturingPage11_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
+	mpi_request.Header.PageNumber = 11;
+	mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_bios_pg2 - obtain bios page 2
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_bios_pg2(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage2_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS;
+	mpi_request.Header.PageNumber = 2;
+	mpi_request.Header.PageVersion = MPI2_BIOSPAGE2_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_bios_pg3 - obtain bios page 3
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_bios_pg3(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2BiosPage3_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS;
+	mpi_request.Header.PageNumber = 3;
+	mpi_request.Header.PageVersion = MPI2_BIOSPAGE3_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_set_bios_pg4 - write out bios page 4
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @sz_config_pg: sizeof the config page
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_set_bios_pg4(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage4_t *config_page,
+	int sz_config_pg)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS;
+	mpi_request.Header.PageNumber = 4;
+	mpi_request.Header.PageVersion = MPI2_BIOSPAGE4_PAGEVERSION;
+
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+		MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+		MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+		sz_config_pg);
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_bios_pg4 - read bios page 4
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @sz_config_pg: sizeof the config page
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_bios_pg4(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage4_t *config_page,
+	int sz_config_pg)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS;
+	mpi_request.Header.PageNumber = 4;
+	mpi_request.Header.PageVersion =  MPI2_BIOSPAGE4_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+		MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	/*
+	 * The sizeof the page is variable. Allow for just the
+	 * size to be returned
+	 */
+	if (config_page && sz_config_pg) {
+		mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+		r = _config_request(ioc, &mpi_request, mpi_reply,
+			MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+			sz_config_pg);
+	}
+
+out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_iounit_pg0 - obtain iounit page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_iounit_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage0_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
+	mpi_request.Header.PageNumber = 0;
+	mpi_request.Header.PageVersion = MPI2_IOUNITPAGE0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_iounit_pg1 - obtain iounit page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
+	mpi_request.Header.PageNumber = 1;
+	mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_set_iounit_pg1 - set iounit page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
+	mpi_request.Header.PageNumber = 1;
+	mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_iounit_pg3 - obtain iounit page 3
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @sz: size of buffer passed in config_page
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_iounit_pg3(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
+	mpi_request.Header.PageNumber = 3;
+	mpi_request.Header.PageVersion = MPI2_IOUNITPAGE3_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_iounit_pg8 - obtain iounit page 8
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_iounit_pg8(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
+	mpi_request.Header.PageNumber = 8;
+	mpi_request.Header.PageVersion = MPI2_IOUNITPAGE8_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_ioc_pg8 - obtain ioc page 8
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_ioc_pg8(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage8_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IOC;
+	mpi_request.Header.PageNumber = 8;
+	mpi_request.Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+/**
+ * mpt3sas_config_get_ioc_pg1 - obtain ioc page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_ioc_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage1_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IOC;
+	mpi_request.Header.PageNumber = 1;
+	mpi_request.Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_set_ioc_pg1 - modify ioc page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_set_ioc_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage1_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IOC;
+	mpi_request.Header.PageNumber = 1;
+	mpi_request.Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_sas_device_pg0 - obtain sas device page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @form: GET_NEXT_HANDLE or HANDLE
+ * @handle: device handle
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_sas_device_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage0_t *config_page,
+	u32 form, u32 handle)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE;
+	mpi_request.Header.PageVersion = MPI2_SASDEVICE0_PAGEVERSION;
+	mpi_request.Header.PageNumber = 0;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress = cpu_to_le32(form | handle);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_sas_device_pg1 - obtain sas device page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @form: GET_NEXT_HANDLE or HANDLE
+ * @handle: device handle
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_sas_device_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage1_t *config_page,
+	u32 form, u32 handle)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE;
+	mpi_request.Header.PageVersion = MPI2_SASDEVICE1_PAGEVERSION;
+	mpi_request.Header.PageNumber = 1;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress = cpu_to_le32(form | handle);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_pcie_device_pg0 - obtain pcie device page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @form: GET_NEXT_HANDLE or HANDLE
+ * @handle: device handle
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_pcie_device_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage0_t *config_page,
+	u32 form, u32 handle)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE;
+	mpi_request.Header.PageVersion = MPI26_PCIEDEVICE0_PAGEVERSION;
+	mpi_request.Header.PageNumber = 0;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+			MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress = cpu_to_le32(form | handle);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+			MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+			sizeof(*config_page));
+out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_pcie_iounit_pg1 - obtain pcie iounit page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @sz: size of buffer passed in config_page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_pcie_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeIOUnitPage1_t *config_page,
+	u16 sz)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_PCIE_IO_UNIT;
+	mpi_request.Header.PageVersion = MPI26_PCIEIOUNITPAGE1_PAGEVERSION;
+	mpi_request.Header.PageNumber = 1;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
+out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_pcie_device_pg2 - obtain pcie device page 2
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @form: GET_NEXT_HANDLE or HANDLE
+ * @handle: device handle
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_pcie_device_pg2(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage2_t *config_page,
+	u32 form, u32 handle)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE;
+	mpi_request.Header.PageVersion = MPI26_PCIEDEVICE2_PAGEVERSION;
+	mpi_request.Header.PageNumber = 2;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+			MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress = cpu_to_le32(form | handle);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+			MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+			sizeof(*config_page));
+out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_number_hba_phys - obtain number of phys on the host
+ * @ioc: per adapter object
+ * @num_phys: pointer returned with the number of phys
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_number_hba_phys(struct MPT3SAS_ADAPTER *ioc, u8 *num_phys)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+	u16 ioc_status;
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasIOUnitPage0_t config_page;
+
+	*num_phys = 0;
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
+	mpi_request.Header.PageNumber = 0;
+	mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, &mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, &mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, &config_page,
+	    sizeof(Mpi2SasIOUnitPage0_t));
+	if (!r) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_SUCCESS)
+			*num_phys = config_page.NumPhys;
+	}
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_sas_iounit_pg0 - obtain sas iounit page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @sz: size of buffer passed in config_page
+ * Context: sleep.
+ *
+ * Calling function should call config_get_number_hba_phys prior to
+ * this function, so enough memory is allocated for config_page.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_sas_iounit_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage0_t *config_page,
+	u16 sz)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
+	mpi_request.Header.PageNumber = 0;
+	mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_sas_iounit_pg1 - obtain sas iounit page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @sz: size of buffer passed in config_page
+ * Context: sleep.
+ *
+ * Calling function should call config_get_number_hba_phys prior to
+ * this function, so enough memory is allocated for config_page.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page,
+	u16 sz)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
+	mpi_request.Header.PageNumber = 1;
+	mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_set_sas_iounit_pg1 - send sas iounit page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @sz: size of buffer passed in config_page
+ * Context: sleep.
+ *
+ * Calling function should call config_get_number_hba_phys prior to
+ * this function, so enough memory is allocated for config_page.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_set_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page,
+	u16 sz)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
+	mpi_request.Header.PageNumber = 1;
+	mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+	_config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_expander_pg0 - obtain expander page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @form: GET_NEXT_HANDLE or HANDLE
+ * @handle: expander handle
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_expander_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2ExpanderPage0_t *config_page, u32 form, u32 handle)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
+	mpi_request.Header.PageNumber = 0;
+	mpi_request.Header.PageVersion = MPI2_SASEXPANDER0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress = cpu_to_le32(form | handle);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_expander_pg1 - obtain expander page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @phy_number: phy number
+ * @handle: expander handle
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_expander_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2ExpanderPage1_t *config_page, u32 phy_number,
+	u16 handle)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
+	mpi_request.Header.PageNumber = 1;
+	mpi_request.Header.PageVersion = MPI2_SASEXPANDER1_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress =
+	    cpu_to_le32(MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM |
+	    (phy_number << MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT) | handle);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_enclosure_pg0 - obtain enclosure page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @form: GET_NEXT_HANDLE or HANDLE
+ * @handle: expander handle
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_enclosure_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2SasEnclosurePage0_t *config_page, u32 form, u32 handle)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE;
+	mpi_request.Header.PageNumber = 0;
+	mpi_request.Header.PageVersion = MPI2_SASENCLOSURE0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress = cpu_to_le32(form | handle);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_phy_pg0 - obtain phy page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @phy_number: phy number
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_phy_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY;
+	mpi_request.Header.PageNumber = 0;
+	mpi_request.Header.PageVersion = MPI2_SASPHY0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress =
+	    cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_phy_pg1 - obtain phy page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @phy_number: phy number
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_phy_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY;
+	mpi_request.Header.PageNumber = 1;
+	mpi_request.Header.PageVersion = MPI2_SASPHY1_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress =
+	    cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_raid_volume_pg1 - obtain raid volume page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @form: GET_NEXT_HANDLE or HANDLE
+ * @handle: volume handle
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_raid_volume_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form,
+	u32 handle)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
+	mpi_request.Header.PageNumber = 1;
+	mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE1_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress = cpu_to_le32(form | handle);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_number_pds - obtain number of phys disk assigned to volume
+ * @ioc: per adapter object
+ * @handle: volume handle
+ * @num_pds: returns pds count
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_number_pds(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	u8 *num_pds)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	Mpi2RaidVolPage0_t config_page;
+	Mpi2ConfigReply_t mpi_reply;
+	int r;
+	u16 ioc_status;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	*num_pds = 0;
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
+	mpi_request.Header.PageNumber = 0;
+	mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, &mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress =
+	    cpu_to_le32(MPI2_RAID_VOLUME_PGAD_FORM_HANDLE | handle);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, &mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, &config_page,
+	    sizeof(Mpi2RaidVolPage0_t));
+	if (!r) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_SUCCESS)
+			*num_pds = config_page.NumPhysDisks;
+	}
+
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_raid_volume_pg0 - obtain raid volume page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @form: GET_NEXT_HANDLE or HANDLE
+ * @handle: volume handle
+ * @sz: size of buffer passed in config_page
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_raid_volume_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form,
+	u32 handle, u16 sz)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
+	mpi_request.Header.PageNumber = 0;
+	mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress = cpu_to_le32(form | handle);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_phys_disk_pg0 - obtain phys disk page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @form: GET_NEXT_PHYSDISKNUM, PHYSDISKNUM, DEVHANDLE
+ * @form_specific: specific to the form
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_phys_disk_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 form,
+	u32 form_specific)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK;
+	mpi_request.Header.PageNumber = 0;
+	mpi_request.Header.PageVersion = MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.PageAddress = cpu_to_le32(form | form_specific);
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_driver_trigger_pg0 - obtain driver trigger page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage0_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType =
+	    MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER;
+	mpi_request.Header.PageNumber = 0;
+	mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * _config_set_driver_trigger_pg0 - write driver trigger page 0
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_config_set_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage0_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType =
+	    MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER;
+	mpi_request.Header.PageNumber = 0;
+	mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE0_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+	_config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_update_driver_trigger_pg0 - update driver trigger page 0
+ * @ioc: per adapter object
+ * @trigger_flag: trigger type bit map
+ * @set: set ot clear trigger values
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+mpt3sas_config_update_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc,
+	u16 trigger_flag, bool set)
+{
+	Mpi26DriverTriggerPage0_t tg_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	int rc;
+	u16 flags, ioc_status;
+
+	rc = mpt3sas_config_get_driver_trigger_pg0(ioc, &mpi_reply, &tg_pg0);
+	if (rc)
+		return rc;
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		dcprintk(ioc,
+		    ioc_err(ioc,
+		    "%s: Failed to get trigger pg0, ioc_status(0x%04x)\n",
+		    __func__, ioc_status));
+		return -EFAULT;
+	}
+
+	if (set)
+		flags = le16_to_cpu(tg_pg0.TriggerFlags) | trigger_flag;
+	else
+		flags = le16_to_cpu(tg_pg0.TriggerFlags) & ~trigger_flag;
+
+	tg_pg0.TriggerFlags = cpu_to_le16(flags);
+
+	rc = _config_set_driver_trigger_pg0(ioc, &mpi_reply, &tg_pg0);
+	if (rc)
+		return rc;
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		dcprintk(ioc,
+		    ioc_err(ioc,
+		    "%s: Failed to update trigger pg0, ioc_status(0x%04x)\n",
+		    __func__, ioc_status));
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+/**
+ * mpt3sas_config_get_driver_trigger_pg1 - obtain driver trigger page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage1_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType =
+	    MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER;
+	mpi_request.Header.PageNumber = 1;
+	mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE1_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * _config_set_driver_trigger_pg1 - write driver trigger page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_config_set_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage1_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType =
+	    MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER;
+	mpi_request.Header.PageNumber = 1;
+	mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE1_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+	_config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_update_driver_trigger_pg1 - update driver trigger page 1
+ * @ioc: per adapter object
+ * @master_tg: Master trigger bit map
+ * @set: set ot clear trigger values
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_update_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_MASTER_TRIGGER_T *master_tg, bool set)
+{
+	Mpi26DriverTriggerPage1_t tg_pg1;
+	Mpi2ConfigReply_t mpi_reply;
+	int rc;
+	u16 ioc_status;
+
+	rc = mpt3sas_config_update_driver_trigger_pg0(ioc,
+	    MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID, set);
+	if (rc)
+		return rc;
+
+	rc = mpt3sas_config_get_driver_trigger_pg1(ioc, &mpi_reply, &tg_pg1);
+	if (rc)
+		goto out;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		dcprintk(ioc,
+		    ioc_err(ioc,
+		    "%s: Failed to get trigger pg1, ioc_status(0x%04x)\n",
+		    __func__, ioc_status));
+		rc = -EFAULT;
+		goto out;
+	}
+
+	if (set) {
+		tg_pg1.NumMasterTrigger = cpu_to_le16(1);
+		tg_pg1.MasterTriggers[0].MasterTriggerFlags = cpu_to_le32(
+		    master_tg->MasterData);
+	} else {
+		tg_pg1.NumMasterTrigger = 0;
+		tg_pg1.MasterTriggers[0].MasterTriggerFlags = 0;
+	}
+
+	rc = _config_set_driver_trigger_pg1(ioc, &mpi_reply, &tg_pg1);
+	if (rc)
+		goto out;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		dcprintk(ioc,
+		    ioc_err(ioc,
+		    "%s: Failed to get trigger pg1, ioc_status(0x%04x)\n",
+		    __func__, ioc_status));
+		rc = -EFAULT;
+		goto out;
+	}
+
+	return 0;
+
+out:
+	mpt3sas_config_update_driver_trigger_pg0(ioc,
+	    MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID, !set);
+
+	return rc;
+}
+
+/**
+ * mpt3sas_config_get_driver_trigger_pg2 - obtain driver trigger page 2
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage2_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType =
+	    MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER;
+	mpi_request.Header.PageNumber = 2;
+	mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE2_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * _config_set_driver_trigger_pg2 - write driver trigger page 2
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_config_set_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage2_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType =
+	    MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER;
+	mpi_request.Header.PageNumber = 2;
+	mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE2_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+	_config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_update_driver_trigger_pg2 - update driver trigger page 2
+ * @ioc: per adapter object
+ * @event_tg: list of Event Triggers
+ * @set: set ot clear trigger values
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_update_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_EVENT_TRIGGERS_T *event_tg, bool set)
+{
+	Mpi26DriverTriggerPage2_t tg_pg2;
+	Mpi2ConfigReply_t mpi_reply;
+	int rc, i, count;
+	u16 ioc_status;
+
+	rc = mpt3sas_config_update_driver_trigger_pg0(ioc,
+	    MPI26_DRIVER_TRIGGER0_FLAG_MPI_EVENT_TRIGGER_VALID, set);
+	if (rc)
+		return rc;
+
+	rc = mpt3sas_config_get_driver_trigger_pg2(ioc, &mpi_reply, &tg_pg2);
+	if (rc)
+		goto out;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		dcprintk(ioc,
+		    ioc_err(ioc,
+		    "%s: Failed to get trigger pg2, ioc_status(0x%04x)\n",
+		    __func__, ioc_status));
+		rc = -EFAULT;
+		goto out;
+	}
+
+	if (set) {
+		count = event_tg->ValidEntries;
+		tg_pg2.NumMPIEventTrigger = cpu_to_le16(count);
+		for (i = 0; i < count; i++) {
+			tg_pg2.MPIEventTriggers[i].MPIEventCode =
+			    cpu_to_le16(
+			    event_tg->EventTriggerEntry[i].EventValue);
+			tg_pg2.MPIEventTriggers[i].MPIEventCodeSpecific =
+			    cpu_to_le16(
+			    event_tg->EventTriggerEntry[i].LogEntryQualifier);
+		}
+	} else {
+		tg_pg2.NumMPIEventTrigger = 0;
+		memset(&tg_pg2.MPIEventTriggers[0], 0,
+		    NUM_VALID_ENTRIES * sizeof(
+		    MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY));
+	}
+
+	rc = _config_set_driver_trigger_pg2(ioc, &mpi_reply, &tg_pg2);
+	if (rc)
+		goto out;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		dcprintk(ioc,
+		    ioc_err(ioc,
+		    "%s: Failed to get trigger pg2, ioc_status(0x%04x)\n",
+		    __func__, ioc_status));
+		rc = -EFAULT;
+		goto out;
+	}
+
+	return 0;
+
+out:
+	mpt3sas_config_update_driver_trigger_pg0(ioc,
+	    MPI26_DRIVER_TRIGGER0_FLAG_MPI_EVENT_TRIGGER_VALID, !set);
+
+	return rc;
+}
+
+/**
+ * mpt3sas_config_get_driver_trigger_pg3 - obtain driver trigger page 3
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage3_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType =
+	    MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER;
+	mpi_request.Header.PageNumber = 3;
+	mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE3_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * _config_set_driver_trigger_pg3 - write driver trigger page 3
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_config_set_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage3_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType =
+	    MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER;
+	mpi_request.Header.PageNumber = 3;
+	mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE3_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+	_config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_update_driver_trigger_pg3 - update driver trigger page 3
+ * @ioc: per adapter object
+ * @scsi_tg: scsi trigger list
+ * @set: set ot clear trigger values
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_update_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_SCSI_TRIGGERS_T *scsi_tg, bool set)
+{
+	Mpi26DriverTriggerPage3_t tg_pg3;
+	Mpi2ConfigReply_t mpi_reply;
+	int rc, i, count;
+	u16 ioc_status;
+
+	rc = mpt3sas_config_update_driver_trigger_pg0(ioc,
+	    MPI26_DRIVER_TRIGGER0_FLAG_SCSI_SENSE_TRIGGER_VALID, set);
+	if (rc)
+		return rc;
+
+	rc = mpt3sas_config_get_driver_trigger_pg3(ioc, &mpi_reply, &tg_pg3);
+	if (rc)
+		goto out;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		dcprintk(ioc,
+		    ioc_err(ioc,
+		    "%s: Failed to get trigger pg3, ioc_status(0x%04x)\n",
+		    __func__, ioc_status));
+		return -EFAULT;
+	}
+
+	if (set) {
+		count = scsi_tg->ValidEntries;
+		tg_pg3.NumSCSISenseTrigger = cpu_to_le16(count);
+		for (i = 0; i < count; i++) {
+			tg_pg3.SCSISenseTriggers[i].ASCQ =
+			    scsi_tg->SCSITriggerEntry[i].ASCQ;
+			tg_pg3.SCSISenseTriggers[i].ASC =
+			    scsi_tg->SCSITriggerEntry[i].ASC;
+			tg_pg3.SCSISenseTriggers[i].SenseKey =
+			    scsi_tg->SCSITriggerEntry[i].SenseKey;
+		}
+	} else {
+		tg_pg3.NumSCSISenseTrigger = 0;
+		memset(&tg_pg3.SCSISenseTriggers[0], 0,
+		    NUM_VALID_ENTRIES * sizeof(
+		    MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY));
+	}
+
+	rc = _config_set_driver_trigger_pg3(ioc, &mpi_reply, &tg_pg3);
+	if (rc)
+		goto out;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		dcprintk(ioc,
+		    ioc_err(ioc,
+		    "%s: Failed to get trigger pg3, ioc_status(0x%04x)\n",
+		     __func__, ioc_status));
+		return -EFAULT;
+	}
+
+	return 0;
+out:
+	mpt3sas_config_update_driver_trigger_pg0(ioc,
+	    MPI26_DRIVER_TRIGGER0_FLAG_SCSI_SENSE_TRIGGER_VALID, !set);
+
+	return rc;
+}
+
+/**
+ * mpt3sas_config_get_driver_trigger_pg4 - obtain driver trigger page 4
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage4_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType =
+	    MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER;
+	mpi_request.Header.PageNumber = 4;
+	mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE4_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * _config_set_driver_trigger_pg4 - write driver trigger page 4
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_config_set_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage4_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType =
+	    MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER;
+	mpi_request.Header.PageNumber = 4;
+	mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE4_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+	_config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_update_driver_trigger_pg4 - update driver trigger page 4
+ * @ioc: per adapter object
+ * @mpi_tg: mpi trigger list
+ * @set: set ot clear trigger values
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_update_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_MPI_TRIGGERS_T *mpi_tg, bool set)
+{
+	Mpi26DriverTriggerPage4_t tg_pg4;
+	Mpi2ConfigReply_t mpi_reply;
+	int rc, i, count;
+	u16 ioc_status;
+
+	rc = mpt3sas_config_update_driver_trigger_pg0(ioc,
+	    MPI26_DRIVER_TRIGGER0_FLAG_LOGINFO_TRIGGER_VALID, set);
+	if (rc)
+		return rc;
+
+	rc = mpt3sas_config_get_driver_trigger_pg4(ioc, &mpi_reply, &tg_pg4);
+	if (rc)
+		goto out;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		dcprintk(ioc,
+		    ioc_err(ioc,
+		    "%s: Failed to get trigger pg4, ioc_status(0x%04x)\n",
+		    __func__, ioc_status));
+		rc = -EFAULT;
+		goto out;
+	}
+
+	if (set) {
+		count = mpi_tg->ValidEntries;
+		tg_pg4.NumIOCStatusLogInfoTrigger = cpu_to_le16(count);
+		for (i = 0; i < count; i++) {
+			tg_pg4.IOCStatusLoginfoTriggers[i].IOCStatus =
+			    cpu_to_le16(mpi_tg->MPITriggerEntry[i].IOCStatus);
+			tg_pg4.IOCStatusLoginfoTriggers[i].LogInfo =
+			    cpu_to_le32(mpi_tg->MPITriggerEntry[i].IocLogInfo);
+		}
+	} else {
+		tg_pg4.NumIOCStatusLogInfoTrigger = 0;
+		memset(&tg_pg4.IOCStatusLoginfoTriggers[0], 0,
+		    NUM_VALID_ENTRIES * sizeof(
+		    MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY));
+	}
+
+	rc = _config_set_driver_trigger_pg4(ioc, &mpi_reply, &tg_pg4);
+	if (rc)
+		goto out;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		dcprintk(ioc,
+		    ioc_err(ioc,
+		    "%s: Failed to get trigger pg4, ioc_status(0x%04x)\n",
+		    __func__, ioc_status));
+		rc = -EFAULT;
+		goto out;
+	}
+
+	return 0;
+
+out:
+	mpt3sas_config_update_driver_trigger_pg0(ioc,
+	    MPI26_DRIVER_TRIGGER0_FLAG_LOGINFO_TRIGGER_VALID, !set);
+
+	return rc;
+}
+
+/**
+ * mpt3sas_config_get_volume_handle - returns volume handle for give hidden
+ * raid components
+ * @ioc: per adapter object
+ * @pd_handle: phys disk handle
+ * @volume_handle: volume handle
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_volume_handle(struct MPT3SAS_ADAPTER *ioc, u16 pd_handle,
+	u16 *volume_handle)
+{
+	Mpi2RaidConfigurationPage0_t *config_page = NULL;
+	Mpi2ConfigRequest_t mpi_request;
+	Mpi2ConfigReply_t mpi_reply;
+	int r, i, config_page_sz;
+	u16 ioc_status;
+	int config_num;
+	u16 element_type;
+	u16 phys_disk_dev_handle;
+
+	*volume_handle = 0;
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG;
+	mpi_request.Header.PageVersion = MPI2_RAIDCONFIG0_PAGEVERSION;
+	mpi_request.Header.PageNumber = 0;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, &mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	config_page_sz = (le16_to_cpu(mpi_reply.ExtPageLength) * 4);
+	config_page = kmalloc(config_page_sz, GFP_KERNEL);
+	if (!config_page) {
+		r = -1;
+		goto out;
+	}
+
+	config_num = 0xff;
+	while (1) {
+		mpi_request.PageAddress = cpu_to_le32(config_num +
+		    MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM);
+		r = _config_request(ioc, &mpi_request, &mpi_reply,
+		    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+		    config_page_sz);
+		if (r)
+			goto out;
+		r = -1;
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+			goto out;
+		for (i = 0; i < config_page->NumElements; i++) {
+			element_type = le16_to_cpu(config_page->
+			    ConfigElement[i].ElementFlags) &
+			    MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE;
+			if (element_type ==
+			    MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT ||
+			    element_type ==
+			    MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT) {
+				phys_disk_dev_handle =
+				    le16_to_cpu(config_page->ConfigElement[i].
+				    PhysDiskDevHandle);
+				if (phys_disk_dev_handle == pd_handle) {
+					*volume_handle =
+					    le16_to_cpu(config_page->
+					    ConfigElement[i].VolDevHandle);
+					r = 0;
+					goto out;
+				}
+			} else if (element_type ==
+			    MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT) {
+				*volume_handle = 0;
+				r = 0;
+				goto out;
+			}
+		}
+		config_num = config_page->ConfigNum;
+	}
+ out:
+	kfree(config_page);
+	return r;
+}
+
+/**
+ * mpt3sas_config_get_volume_wwid - returns wwid given the volume handle
+ * @ioc: per adapter object
+ * @volume_handle: volume handle
+ * @wwid: volume wwid
+ * Context: sleep.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_volume_wwid(struct MPT3SAS_ADAPTER *ioc, u16 volume_handle,
+	u64 *wwid)
+{
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2RaidVolPage1_t raid_vol_pg1;
+
+	*wwid = 0;
+	if (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+	    &raid_vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE,
+	    volume_handle))) {
+		*wwid = le64_to_cpu(raid_vol_pg1.WWID);
+		return 0;
+	} else
+		return -1;
+}
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
new file mode 100644
index 0000000000..efdb8178db
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -0,0 +1,4189 @@
+/*
+ * Management Module Support for MPT (Message Passing Technology) based
+ * controllers
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.c
+ * Copyright (C) 2012-2014  LSI Corporation
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/compat.h>
+#include <linux/poll.h>
+
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include "mpt3sas_base.h"
+#include "mpt3sas_ctl.h"
+
+
+static struct fasync_struct *async_queue;
+static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait);
+
+
+/**
+ * enum block_state - blocking state
+ * @NON_BLOCKING: non blocking
+ * @BLOCKING: blocking
+ *
+ * These states are for ioctls that need to wait for a response
+ * from firmware, so they probably require sleep.
+ */
+enum block_state {
+	NON_BLOCKING,
+	BLOCKING,
+};
+
+/**
+ * _ctl_display_some_debug - debug routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @calling_function_name: string pass from calling function
+ * @mpi_reply: reply message frame
+ * Context: none.
+ *
+ * Function for displaying debug info helpful when debugging issues
+ * in this module.
+ */
+static void
+_ctl_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	char *calling_function_name, MPI2DefaultReply_t *mpi_reply)
+{
+	Mpi2ConfigRequest_t *mpi_request;
+	char *desc = NULL;
+
+	if (!(ioc->logging_level & MPT_DEBUG_IOCTL))
+		return;
+
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	switch (mpi_request->Function) {
+	case MPI2_FUNCTION_SCSI_IO_REQUEST:
+	{
+		Mpi2SCSIIORequest_t *scsi_request =
+		    (Mpi2SCSIIORequest_t *)mpi_request;
+
+		snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
+		    "scsi_io, cmd(0x%02x), cdb_len(%d)",
+		    scsi_request->CDB.CDB32[0],
+		    le16_to_cpu(scsi_request->IoFlags) & 0xF);
+		desc = ioc->tmp_string;
+		break;
+	}
+	case MPI2_FUNCTION_SCSI_TASK_MGMT:
+		desc = "task_mgmt";
+		break;
+	case MPI2_FUNCTION_IOC_INIT:
+		desc = "ioc_init";
+		break;
+	case MPI2_FUNCTION_IOC_FACTS:
+		desc = "ioc_facts";
+		break;
+	case MPI2_FUNCTION_CONFIG:
+	{
+		Mpi2ConfigRequest_t *config_request =
+		    (Mpi2ConfigRequest_t *)mpi_request;
+
+		snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
+		    "config, type(0x%02x), ext_type(0x%02x), number(%d)",
+		    (config_request->Header.PageType &
+		     MPI2_CONFIG_PAGETYPE_MASK), config_request->ExtPageType,
+		    config_request->Header.PageNumber);
+		desc = ioc->tmp_string;
+		break;
+	}
+	case MPI2_FUNCTION_PORT_FACTS:
+		desc = "port_facts";
+		break;
+	case MPI2_FUNCTION_PORT_ENABLE:
+		desc = "port_enable";
+		break;
+	case MPI2_FUNCTION_EVENT_NOTIFICATION:
+		desc = "event_notification";
+		break;
+	case MPI2_FUNCTION_FW_DOWNLOAD:
+		desc = "fw_download";
+		break;
+	case MPI2_FUNCTION_FW_UPLOAD:
+		desc = "fw_upload";
+		break;
+	case MPI2_FUNCTION_RAID_ACTION:
+		desc = "raid_action";
+		break;
+	case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
+	{
+		Mpi2SCSIIORequest_t *scsi_request =
+		    (Mpi2SCSIIORequest_t *)mpi_request;
+
+		snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
+		    "raid_pass, cmd(0x%02x), cdb_len(%d)",
+		    scsi_request->CDB.CDB32[0],
+		    le16_to_cpu(scsi_request->IoFlags) & 0xF);
+		desc = ioc->tmp_string;
+		break;
+	}
+	case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
+		desc = "sas_iounit_cntl";
+		break;
+	case MPI2_FUNCTION_SATA_PASSTHROUGH:
+		desc = "sata_pass";
+		break;
+	case MPI2_FUNCTION_DIAG_BUFFER_POST:
+		desc = "diag_buffer_post";
+		break;
+	case MPI2_FUNCTION_DIAG_RELEASE:
+		desc = "diag_release";
+		break;
+	case MPI2_FUNCTION_SMP_PASSTHROUGH:
+		desc = "smp_passthrough";
+		break;
+	case MPI2_FUNCTION_TOOLBOX:
+		desc = "toolbox";
+		break;
+	case MPI2_FUNCTION_NVME_ENCAPSULATED:
+		desc = "nvme_encapsulated";
+		break;
+	}
+
+	if (!desc)
+		return;
+
+	ioc_info(ioc, "%s: %s, smid(%d)\n", calling_function_name, desc, smid);
+
+	if (!mpi_reply)
+		return;
+
+	if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo)
+		ioc_info(ioc, "\tiocstatus(0x%04x), loginfo(0x%08x)\n",
+			 le16_to_cpu(mpi_reply->IOCStatus),
+			 le32_to_cpu(mpi_reply->IOCLogInfo));
+
+	if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
+	    mpi_request->Function ==
+	    MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
+		Mpi2SCSIIOReply_t *scsi_reply =
+		    (Mpi2SCSIIOReply_t *)mpi_reply;
+		struct _sas_device *sas_device = NULL;
+		struct _pcie_device *pcie_device = NULL;
+
+		sas_device = mpt3sas_get_sdev_by_handle(ioc,
+		    le16_to_cpu(scsi_reply->DevHandle));
+		if (sas_device) {
+			ioc_warn(ioc, "\tsas_address(0x%016llx), phy(%d)\n",
+				 (u64)sas_device->sas_address,
+				 sas_device->phy);
+			ioc_warn(ioc, "\tenclosure_logical_id(0x%016llx), slot(%d)\n",
+				 (u64)sas_device->enclosure_logical_id,
+				 sas_device->slot);
+			sas_device_put(sas_device);
+		}
+		if (!sas_device) {
+			pcie_device = mpt3sas_get_pdev_by_handle(ioc,
+				le16_to_cpu(scsi_reply->DevHandle));
+			if (pcie_device) {
+				ioc_warn(ioc, "\tWWID(0x%016llx), port(%d)\n",
+					 (unsigned long long)pcie_device->wwid,
+					 pcie_device->port_num);
+				if (pcie_device->enclosure_handle != 0)
+					ioc_warn(ioc, "\tenclosure_logical_id(0x%016llx), slot(%d)\n",
+						 (u64)pcie_device->enclosure_logical_id,
+						 pcie_device->slot);
+				pcie_device_put(pcie_device);
+			}
+		}
+		if (scsi_reply->SCSIState || scsi_reply->SCSIStatus)
+			ioc_info(ioc, "\tscsi_state(0x%02x), scsi_status(0x%02x)\n",
+				 scsi_reply->SCSIState,
+				 scsi_reply->SCSIStatus);
+	}
+}
+
+/**
+ * mpt3sas_ctl_done - ctl module completion routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: none.
+ *
+ * The callback handler when using ioc->ctl_cb_idx.
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *         0 means the mf is freed from this function.
+ */
+u8
+mpt3sas_ctl_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply)
+{
+	MPI2DefaultReply_t *mpi_reply;
+	Mpi2SCSIIOReply_t *scsiio_reply;
+	Mpi26NVMeEncapsulatedErrorReply_t *nvme_error_reply;
+	const void *sense_data;
+	u32 sz;
+
+	if (ioc->ctl_cmds.status == MPT3_CMD_NOT_USED)
+		return 1;
+	if (ioc->ctl_cmds.smid != smid)
+		return 1;
+	ioc->ctl_cmds.status |= MPT3_CMD_COMPLETE;
+	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	if (mpi_reply) {
+		memcpy(ioc->ctl_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
+		ioc->ctl_cmds.status |= MPT3_CMD_REPLY_VALID;
+		/* get sense data */
+		if (mpi_reply->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
+		    mpi_reply->Function ==
+		    MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
+			scsiio_reply = (Mpi2SCSIIOReply_t *)mpi_reply;
+			if (scsiio_reply->SCSIState &
+			    MPI2_SCSI_STATE_AUTOSENSE_VALID) {
+				sz = min_t(u32, SCSI_SENSE_BUFFERSIZE,
+				    le32_to_cpu(scsiio_reply->SenseCount));
+				sense_data = mpt3sas_base_get_sense_buffer(ioc,
+				    smid);
+				memcpy(ioc->ctl_cmds.sense, sense_data, sz);
+			}
+		}
+		/*
+		 * Get Error Response data for NVMe device. The ctl_cmds.sense
+		 * buffer is used to store the Error Response data.
+		 */
+		if (mpi_reply->Function == MPI2_FUNCTION_NVME_ENCAPSULATED) {
+			nvme_error_reply =
+			    (Mpi26NVMeEncapsulatedErrorReply_t *)mpi_reply;
+			sz = min_t(u32, NVME_ERROR_RESPONSE_SIZE,
+			    le16_to_cpu(nvme_error_reply->ErrorResponseCount));
+			sense_data = mpt3sas_base_get_sense_buffer(ioc, smid);
+			memcpy(ioc->ctl_cmds.sense, sense_data, sz);
+		}
+	}
+
+	_ctl_display_some_debug(ioc, smid, "ctl_done", mpi_reply);
+	ioc->ctl_cmds.status &= ~MPT3_CMD_PENDING;
+	complete(&ioc->ctl_cmds.done);
+	return 1;
+}
+
+/**
+ * _ctl_check_event_type - determines when an event needs logging
+ * @ioc: per adapter object
+ * @event: firmware event
+ *
+ * The bitmask in ioc->event_type[] indicates which events should be
+ * be saved in the driver event_log.  This bitmask is set by application.
+ *
+ * Return: 1 when event should be captured, or zero means no match.
+ */
+static int
+_ctl_check_event_type(struct MPT3SAS_ADAPTER *ioc, u16 event)
+{
+	u16 i;
+	u32 desired_event;
+
+	if (event >= 128 || !event || !ioc->event_log)
+		return 0;
+
+	desired_event = (1 << (event % 32));
+	if (!desired_event)
+		desired_event = 1;
+	i = event / 32;
+	return desired_event & ioc->event_type[i];
+}
+
+/**
+ * mpt3sas_ctl_add_to_event_log - add event
+ * @ioc: per adapter object
+ * @mpi_reply: reply message frame
+ */
+void
+mpt3sas_ctl_add_to_event_log(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventNotificationReply_t *mpi_reply)
+{
+	struct MPT3_IOCTL_EVENTS *event_log;
+	u16 event;
+	int i;
+	u32 sz, event_data_sz;
+	u8 send_aen = 0;
+
+	if (!ioc->event_log)
+		return;
+
+	event = le16_to_cpu(mpi_reply->Event);
+
+	if (_ctl_check_event_type(ioc, event)) {
+
+		/* insert entry into circular event_log */
+		i = ioc->event_context % MPT3SAS_CTL_EVENT_LOG_SIZE;
+		event_log = ioc->event_log;
+		event_log[i].event = event;
+		event_log[i].context = ioc->event_context++;
+
+		event_data_sz = le16_to_cpu(mpi_reply->EventDataLength)*4;
+		sz = min_t(u32, event_data_sz, MPT3_EVENT_DATA_SIZE);
+		memset(event_log[i].data, 0, MPT3_EVENT_DATA_SIZE);
+		memcpy(event_log[i].data, mpi_reply->EventData, sz);
+		send_aen = 1;
+	}
+
+	/* This aen_event_read_flag flag is set until the
+	 * application has read the event log.
+	 * For MPI2_EVENT_LOG_ENTRY_ADDED, we always notify.
+	 */
+	if (event == MPI2_EVENT_LOG_ENTRY_ADDED ||
+	    (send_aen && !ioc->aen_event_read_flag)) {
+		ioc->aen_event_read_flag = 1;
+		wake_up_interruptible(&ctl_poll_wait);
+		if (async_queue)
+			kill_fasync(&async_queue, SIGIO, POLL_IN);
+	}
+}
+
+/**
+ * mpt3sas_ctl_event_callback - firmware event handler (called at ISR time)
+ * @ioc: per adapter object
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: interrupt.
+ *
+ * This function merely adds a new work task into ioc->firmware_event_thread.
+ * The tasks are worked from _firmware_event_work in user context.
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *         0 means the mf is freed from this function.
+ */
+u8
+mpt3sas_ctl_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
+	u32 reply)
+{
+	Mpi2EventNotificationReply_t *mpi_reply;
+
+	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	if (mpi_reply)
+		mpt3sas_ctl_add_to_event_log(ioc, mpi_reply);
+	return 1;
+}
+
+/**
+ * _ctl_verify_adapter - validates ioc_number passed from application
+ * @ioc_number: ?
+ * @iocpp: The ioc pointer is returned in this.
+ * @mpi_version: will be MPI2_VERSION for mpt2ctl ioctl device &
+ * MPI25_VERSION | MPI26_VERSION for mpt3ctl ioctl device.
+ *
+ * Return: (-1) means error, else ioc_number.
+ */
+static int
+_ctl_verify_adapter(int ioc_number, struct MPT3SAS_ADAPTER **iocpp,
+							int mpi_version)
+{
+	struct MPT3SAS_ADAPTER *ioc;
+	int version = 0;
+	/* global ioc lock to protect controller on list operations */
+	spin_lock(&gioc_lock);
+	list_for_each_entry(ioc, &mpt3sas_ioc_list, list) {
+		if (ioc->id != ioc_number)
+			continue;
+		/* Check whether this ioctl command is from right
+		 * ioctl device or not, if not continue the search.
+		 */
+		version = ioc->hba_mpi_version_belonged;
+		/* MPI25_VERSION and MPI26_VERSION uses same ioctl
+		 * device.
+		 */
+		if (mpi_version == (MPI25_VERSION | MPI26_VERSION)) {
+			if ((version == MPI25_VERSION) ||
+				(version == MPI26_VERSION))
+				goto out;
+			else
+				continue;
+		} else {
+			if (version != mpi_version)
+				continue;
+		}
+out:
+		spin_unlock(&gioc_lock);
+		*iocpp = ioc;
+		return ioc_number;
+	}
+	spin_unlock(&gioc_lock);
+	*iocpp = NULL;
+	return -1;
+}
+
+/**
+ * mpt3sas_ctl_pre_reset_handler - reset callback handler (for ctl)
+ * @ioc: per adapter object
+ *
+ * The handler for doing any required cleanup or initialization.
+ */
+void mpt3sas_ctl_pre_reset_handler(struct MPT3SAS_ADAPTER *ioc)
+{
+	int i;
+	u8 issue_reset;
+
+	dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_PRE_RESET\n", __func__));
+	for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
+		if (!(ioc->diag_buffer_status[i] &
+		      MPT3_DIAG_BUFFER_IS_REGISTERED))
+			continue;
+		if ((ioc->diag_buffer_status[i] &
+		     MPT3_DIAG_BUFFER_IS_RELEASED))
+			continue;
+
+		/*
+		 * add a log message to indicate the release
+		 */
+		ioc_info(ioc,
+		    "%s: Releasing the trace buffer due to adapter reset.",
+		    __func__);
+		ioc->htb_rel.buffer_rel_condition =
+		    MPT3_DIAG_BUFFER_REL_TRIGGER;
+		mpt3sas_send_diag_release(ioc, i, &issue_reset);
+	}
+}
+
+/**
+ * mpt3sas_ctl_clear_outstanding_ioctls - clears outstanding ioctl cmd.
+ * @ioc: per adapter object
+ *
+ * The handler for doing any required cleanup or initialization.
+ */
+void mpt3sas_ctl_clear_outstanding_ioctls(struct MPT3SAS_ADAPTER *ioc)
+{
+	dtmprintk(ioc,
+	    ioc_info(ioc, "%s: clear outstanding ioctl cmd\n", __func__));
+	if (ioc->ctl_cmds.status & MPT3_CMD_PENDING) {
+		ioc->ctl_cmds.status |= MPT3_CMD_RESET;
+		mpt3sas_base_free_smid(ioc, ioc->ctl_cmds.smid);
+		complete(&ioc->ctl_cmds.done);
+	}
+}
+
+/**
+ * mpt3sas_ctl_reset_done_handler - reset callback handler (for ctl)
+ * @ioc: per adapter object
+ *
+ * The handler for doing any required cleanup or initialization.
+ */
+void mpt3sas_ctl_reset_done_handler(struct MPT3SAS_ADAPTER *ioc)
+{
+	int i;
+
+	dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_DONE_RESET\n", __func__));
+
+	for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
+		if (!(ioc->diag_buffer_status[i] &
+		      MPT3_DIAG_BUFFER_IS_REGISTERED))
+			continue;
+		if ((ioc->diag_buffer_status[i] &
+		     MPT3_DIAG_BUFFER_IS_RELEASED))
+			continue;
+		ioc->diag_buffer_status[i] |=
+			MPT3_DIAG_BUFFER_IS_DIAG_RESET;
+	}
+}
+
+/**
+ * _ctl_fasync -
+ * @fd: ?
+ * @filep: ?
+ * @mode: ?
+ *
+ * Called when application request fasyn callback handler.
+ */
+static int
+_ctl_fasync(int fd, struct file *filep, int mode)
+{
+	return fasync_helper(fd, filep, mode, &async_queue);
+}
+
+/**
+ * _ctl_poll -
+ * @filep: ?
+ * @wait: ?
+ *
+ */
+static __poll_t
+_ctl_poll(struct file *filep, poll_table *wait)
+{
+	struct MPT3SAS_ADAPTER *ioc;
+
+	poll_wait(filep, &ctl_poll_wait, wait);
+
+	/* global ioc lock to protect controller on list operations */
+	spin_lock(&gioc_lock);
+	list_for_each_entry(ioc, &mpt3sas_ioc_list, list) {
+		if (ioc->aen_event_read_flag) {
+			spin_unlock(&gioc_lock);
+			return EPOLLIN | EPOLLRDNORM;
+		}
+	}
+	spin_unlock(&gioc_lock);
+	return 0;
+}
+
+/**
+ * _ctl_set_task_mid - assign an active smid to tm request
+ * @ioc: per adapter object
+ * @karg: (struct mpt3_ioctl_command)
+ * @tm_request: pointer to mf from user space
+ *
+ * Return: 0 when an smid if found, else fail.
+ * during failure, the reply frame is filled.
+ */
+static int
+_ctl_set_task_mid(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command *karg,
+	Mpi2SCSITaskManagementRequest_t *tm_request)
+{
+	bool found = false;
+	u16 smid;
+	u16 handle;
+	struct scsi_cmnd *scmd;
+	struct MPT3SAS_DEVICE *priv_data;
+	Mpi2SCSITaskManagementReply_t *tm_reply;
+	u32 sz;
+	u32 lun;
+	char *desc = NULL;
+
+	if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK)
+		desc = "abort_task";
+	else if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK)
+		desc = "query_task";
+	else
+		return 0;
+
+	lun = scsilun_to_int((struct scsi_lun *)tm_request->LUN);
+
+	handle = le16_to_cpu(tm_request->DevHandle);
+	for (smid = ioc->scsiio_depth; smid && !found; smid--) {
+		struct scsiio_tracker *st;
+		__le16 task_mid;
+
+		scmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid);
+		if (!scmd)
+			continue;
+		if (lun != scmd->device->lun)
+			continue;
+		priv_data = scmd->device->hostdata;
+		if (priv_data->sas_target == NULL)
+			continue;
+		if (priv_data->sas_target->handle != handle)
+			continue;
+		st = scsi_cmd_priv(scmd);
+
+		/*
+		 * If the given TaskMID from the user space is zero, then the
+		 * first outstanding smid will be picked up.  Otherwise,
+		 * targeted smid will be the one.
+		 */
+		task_mid = cpu_to_le16(st->smid);
+		if (!tm_request->TaskMID)
+			tm_request->TaskMID = task_mid;
+		found = tm_request->TaskMID == task_mid;
+	}
+
+	if (!found) {
+		dctlprintk(ioc,
+			   ioc_info(ioc, "%s: handle(0x%04x), lun(%d), no active mid!!\n",
+				    desc, le16_to_cpu(tm_request->DevHandle),
+				    lun));
+		tm_reply = ioc->ctl_cmds.reply;
+		tm_reply->DevHandle = tm_request->DevHandle;
+		tm_reply->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
+		tm_reply->TaskType = tm_request->TaskType;
+		tm_reply->MsgLength = sizeof(Mpi2SCSITaskManagementReply_t)/4;
+		tm_reply->VP_ID = tm_request->VP_ID;
+		tm_reply->VF_ID = tm_request->VF_ID;
+		sz = min_t(u32, karg->max_reply_bytes, ioc->reply_sz);
+		if (copy_to_user(karg->reply_frame_buf_ptr, ioc->ctl_cmds.reply,
+		    sz))
+			pr_err("failure at %s:%d/%s()!\n", __FILE__,
+			    __LINE__, __func__);
+		return 1;
+	}
+
+	dctlprintk(ioc,
+		   ioc_info(ioc, "%s: handle(0x%04x), lun(%d), task_mid(%d)\n",
+			    desc, le16_to_cpu(tm_request->DevHandle), lun,
+			    le16_to_cpu(tm_request->TaskMID)));
+	return 0;
+}
+
+/**
+ * _ctl_do_mpt_command - main handler for MPT3COMMAND opcode
+ * @ioc: per adapter object
+ * @karg: (struct mpt3_ioctl_command)
+ * @mf: pointer to mf in user space
+ */
+static long
+_ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
+	void __user *mf)
+{
+	MPI2RequestHeader_t *mpi_request = NULL, *request;
+	MPI2DefaultReply_t *mpi_reply;
+	Mpi26NVMeEncapsulatedRequest_t *nvme_encap_request = NULL;
+	struct _pcie_device *pcie_device = NULL;
+	u16 smid;
+	unsigned long timeout;
+	u8 issue_reset;
+	u32 sz, sz_arg;
+	void *psge;
+	void *data_out = NULL;
+	dma_addr_t data_out_dma = 0;
+	size_t data_out_sz = 0;
+	void *data_in = NULL;
+	dma_addr_t data_in_dma = 0;
+	size_t data_in_sz = 0;
+	long ret;
+	u16 device_handle = MPT3SAS_INVALID_DEVICE_HANDLE;
+
+	issue_reset = 0;
+
+	if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) {
+		ioc_err(ioc, "%s: ctl_cmd in use\n", __func__);
+		ret = -EAGAIN;
+		goto out;
+	}
+
+	ret = mpt3sas_wait_for_ioc(ioc,	IOC_OPERATIONAL_WAIT_COUNT);
+	if (ret)
+		goto out;
+
+	mpi_request = kzalloc(ioc->request_sz, GFP_KERNEL);
+	if (!mpi_request) {
+		ioc_err(ioc, "%s: failed obtaining a memory for mpi_request\n",
+			__func__);
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* Check for overflow and wraparound */
+	if (karg.data_sge_offset * 4 > ioc->request_sz ||
+	    karg.data_sge_offset > (UINT_MAX / 4)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* copy in request message frame from user */
+	if (copy_from_user(mpi_request, mf, karg.data_sge_offset*4)) {
+		pr_err("failure at %s:%d/%s()!\n", __FILE__, __LINE__,
+		    __func__);
+		ret = -EFAULT;
+		goto out;
+	}
+
+	if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
+		smid = mpt3sas_base_get_smid_hpr(ioc, ioc->ctl_cb_idx);
+		if (!smid) {
+			ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
+			ret = -EAGAIN;
+			goto out;
+		}
+	} else {
+		/* Use first reserved smid for passthrough ioctls */
+		smid = ioc->scsiio_depth - INTERNAL_SCSIIO_CMDS_COUNT + 1;
+	}
+
+	ret = 0;
+	ioc->ctl_cmds.status = MPT3_CMD_PENDING;
+	memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
+	request = mpt3sas_base_get_msg_frame(ioc, smid);
+	memset(request, 0, ioc->request_sz);
+	memcpy(request, mpi_request, karg.data_sge_offset*4);
+	ioc->ctl_cmds.smid = smid;
+	data_out_sz = karg.data_out_size;
+	data_in_sz = karg.data_in_size;
+
+	if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
+	    mpi_request->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
+	    mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT ||
+	    mpi_request->Function == MPI2_FUNCTION_SATA_PASSTHROUGH ||
+	    mpi_request->Function == MPI2_FUNCTION_NVME_ENCAPSULATED) {
+
+		device_handle = le16_to_cpu(mpi_request->FunctionDependent1);
+		if (!device_handle || (device_handle >
+		    ioc->facts.MaxDevHandle)) {
+			ret = -EINVAL;
+			mpt3sas_base_free_smid(ioc, smid);
+			goto out;
+		}
+	}
+
+	/* obtain dma-able memory for data transfer */
+	if (data_out_sz) /* WRITE */ {
+		data_out = dma_alloc_coherent(&ioc->pdev->dev, data_out_sz,
+				&data_out_dma, GFP_KERNEL);
+		if (!data_out) {
+			pr_err("failure at %s:%d/%s()!\n", __FILE__,
+			    __LINE__, __func__);
+			ret = -ENOMEM;
+			mpt3sas_base_free_smid(ioc, smid);
+			goto out;
+		}
+		if (copy_from_user(data_out, karg.data_out_buf_ptr,
+			data_out_sz)) {
+			pr_err("failure at %s:%d/%s()!\n", __FILE__,
+			    __LINE__, __func__);
+			ret =  -EFAULT;
+			mpt3sas_base_free_smid(ioc, smid);
+			goto out;
+		}
+	}
+
+	if (data_in_sz) /* READ */ {
+		data_in = dma_alloc_coherent(&ioc->pdev->dev, data_in_sz,
+				&data_in_dma, GFP_KERNEL);
+		if (!data_in) {
+			pr_err("failure at %s:%d/%s()!\n", __FILE__,
+			    __LINE__, __func__);
+			ret = -ENOMEM;
+			mpt3sas_base_free_smid(ioc, smid);
+			goto out;
+		}
+	}
+
+	psge = (void *)request + (karg.data_sge_offset*4);
+
+	/* send command to firmware */
+	_ctl_display_some_debug(ioc, smid, "ctl_request", NULL);
+
+	init_completion(&ioc->ctl_cmds.done);
+	switch (mpi_request->Function) {
+	case MPI2_FUNCTION_NVME_ENCAPSULATED:
+	{
+		nvme_encap_request = (Mpi26NVMeEncapsulatedRequest_t *)request;
+		if (!ioc->pcie_sg_lookup) {
+			dtmprintk(ioc, ioc_info(ioc,
+			    "HBA doesn't support NVMe. Rejecting NVMe Encapsulated request.\n"
+			    ));
+
+			if (ioc->logging_level & MPT_DEBUG_TM)
+				_debug_dump_mf(nvme_encap_request,
+				    ioc->request_sz/4);
+			mpt3sas_base_free_smid(ioc, smid);
+			ret = -EINVAL;
+			goto out;
+		}
+		/*
+		 * Get the Physical Address of the sense buffer.
+		 * Use Error Response buffer address field to hold the sense
+		 * buffer address.
+		 * Clear the internal sense buffer, which will potentially hold
+		 * the Completion Queue Entry on return, or 0 if no Entry.
+		 * Build the PRPs and set direction bits.
+		 * Send the request.
+		 */
+		nvme_encap_request->ErrorResponseBaseAddress =
+		    cpu_to_le64(ioc->sense_dma & 0xFFFFFFFF00000000UL);
+		nvme_encap_request->ErrorResponseBaseAddress |=
+		   cpu_to_le64(le32_to_cpu(
+		   mpt3sas_base_get_sense_buffer_dma(ioc, smid)));
+		nvme_encap_request->ErrorResponseAllocationLength =
+					cpu_to_le16(NVME_ERROR_RESPONSE_SIZE);
+		memset(ioc->ctl_cmds.sense, 0, NVME_ERROR_RESPONSE_SIZE);
+		ioc->build_nvme_prp(ioc, smid, nvme_encap_request,
+		    data_out_dma, data_out_sz, data_in_dma, data_in_sz);
+		if (test_bit(device_handle, ioc->device_remove_in_progress)) {
+			dtmprintk(ioc,
+				  ioc_info(ioc, "handle(0x%04x): ioctl failed due to device removal in progress\n",
+					   device_handle));
+			mpt3sas_base_free_smid(ioc, smid);
+			ret = -EINVAL;
+			goto out;
+		}
+		mpt3sas_base_put_smid_nvme_encap(ioc, smid);
+		break;
+	}
+	case MPI2_FUNCTION_SCSI_IO_REQUEST:
+	case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
+	{
+		Mpi2SCSIIORequest_t *scsiio_request =
+		    (Mpi2SCSIIORequest_t *)request;
+		scsiio_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
+		scsiio_request->SenseBufferLowAddress =
+		    mpt3sas_base_get_sense_buffer_dma(ioc, smid);
+		memset(ioc->ctl_cmds.sense, 0, SCSI_SENSE_BUFFERSIZE);
+		if (test_bit(device_handle, ioc->device_remove_in_progress)) {
+			dtmprintk(ioc,
+				  ioc_info(ioc, "handle(0x%04x) :ioctl failed due to device removal in progress\n",
+					   device_handle));
+			mpt3sas_base_free_smid(ioc, smid);
+			ret = -EINVAL;
+			goto out;
+		}
+		ioc->build_sg(ioc, psge, data_out_dma, data_out_sz,
+		    data_in_dma, data_in_sz);
+		if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)
+			ioc->put_smid_scsi_io(ioc, smid, device_handle);
+		else
+			ioc->put_smid_default(ioc, smid);
+		break;
+	}
+	case MPI2_FUNCTION_SCSI_TASK_MGMT:
+	{
+		Mpi2SCSITaskManagementRequest_t *tm_request =
+		    (Mpi2SCSITaskManagementRequest_t *)request;
+
+		dtmprintk(ioc,
+			  ioc_info(ioc, "TASK_MGMT: handle(0x%04x), task_type(0x%02x)\n",
+				   le16_to_cpu(tm_request->DevHandle),
+				   tm_request->TaskType));
+		ioc->got_task_abort_from_ioctl = 1;
+		if (tm_request->TaskType ==
+		    MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK ||
+		    tm_request->TaskType ==
+		    MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK) {
+			if (_ctl_set_task_mid(ioc, &karg, tm_request)) {
+				mpt3sas_base_free_smid(ioc, smid);
+				ioc->got_task_abort_from_ioctl = 0;
+				goto out;
+			}
+		}
+		ioc->got_task_abort_from_ioctl = 0;
+
+		if (test_bit(device_handle, ioc->device_remove_in_progress)) {
+			dtmprintk(ioc,
+				  ioc_info(ioc, "handle(0x%04x) :ioctl failed due to device removal in progress\n",
+					   device_handle));
+			mpt3sas_base_free_smid(ioc, smid);
+			ret = -EINVAL;
+			goto out;
+		}
+		mpt3sas_scsih_set_tm_flag(ioc, le16_to_cpu(
+		    tm_request->DevHandle));
+		ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz,
+		    data_in_dma, data_in_sz);
+		ioc->put_smid_hi_priority(ioc, smid, 0);
+		break;
+	}
+	case MPI2_FUNCTION_SMP_PASSTHROUGH:
+	{
+		Mpi2SmpPassthroughRequest_t *smp_request =
+		    (Mpi2SmpPassthroughRequest_t *)mpi_request;
+		u8 *data;
+
+		if (!ioc->multipath_on_hba) {
+			/* ioc determines which port to use */
+			smp_request->PhysicalPort = 0xFF;
+		}
+		if (smp_request->PassthroughFlags &
+		    MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE)
+			data = (u8 *)&smp_request->SGL;
+		else {
+			if (unlikely(data_out == NULL)) {
+				pr_err("failure at %s:%d/%s()!\n",
+				    __FILE__, __LINE__, __func__);
+				mpt3sas_base_free_smid(ioc, smid);
+				ret = -EINVAL;
+				goto out;
+			}
+			data = data_out;
+		}
+
+		if (data[1] == 0x91 && (data[10] == 1 || data[10] == 2)) {
+			ioc->ioc_link_reset_in_progress = 1;
+			ioc->ignore_loginfos = 1;
+		}
+		ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma,
+		    data_in_sz);
+		ioc->put_smid_default(ioc, smid);
+		break;
+	}
+	case MPI2_FUNCTION_SATA_PASSTHROUGH:
+	{
+		if (test_bit(device_handle, ioc->device_remove_in_progress)) {
+			dtmprintk(ioc,
+				  ioc_info(ioc, "handle(0x%04x) :ioctl failed due to device removal in progress\n",
+					   device_handle));
+			mpt3sas_base_free_smid(ioc, smid);
+			ret = -EINVAL;
+			goto out;
+		}
+		ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma,
+		    data_in_sz);
+		ioc->put_smid_default(ioc, smid);
+		break;
+	}
+	case MPI2_FUNCTION_FW_DOWNLOAD:
+	{
+		if (ioc->pdev->vendor == MPI2_MFGPAGE_VENDORID_ATTO) {
+			ioc_info(ioc, "Firmware download not supported for ATTO HBA.\n");
+			ret = -EPERM;
+			break;
+		}
+		fallthrough;
+	}
+	case MPI2_FUNCTION_FW_UPLOAD:
+	{
+		ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma,
+		    data_in_sz);
+		ioc->put_smid_default(ioc, smid);
+		break;
+	}
+	case MPI2_FUNCTION_TOOLBOX:
+	{
+		Mpi2ToolboxCleanRequest_t *toolbox_request =
+			(Mpi2ToolboxCleanRequest_t *)mpi_request;
+
+		if ((toolbox_request->Tool == MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL)
+		    || (toolbox_request->Tool ==
+		    MPI26_TOOLBOX_BACKEND_PCIE_LANE_MARGIN))
+			ioc->build_sg(ioc, psge, data_out_dma, data_out_sz,
+				data_in_dma, data_in_sz);
+		else if (toolbox_request->Tool ==
+				MPI2_TOOLBOX_MEMORY_MOVE_TOOL) {
+			Mpi2ToolboxMemMoveRequest_t *mem_move_request =
+					(Mpi2ToolboxMemMoveRequest_t *)request;
+			Mpi2SGESimple64_t tmp, *src = NULL, *dst = NULL;
+
+			ioc->build_sg_mpi(ioc, psge, data_out_dma,
+					data_out_sz, data_in_dma, data_in_sz);
+			if (data_out_sz && !data_in_sz) {
+				dst =
+				    (Mpi2SGESimple64_t *)&mem_move_request->SGL;
+				src = (void *)dst + ioc->sge_size;
+
+				memcpy(&tmp, src, ioc->sge_size);
+				memcpy(src, dst, ioc->sge_size);
+				memcpy(dst, &tmp, ioc->sge_size);
+			}
+			if (ioc->logging_level & MPT_DEBUG_TM) {
+				ioc_info(ioc,
+				  "Mpi2ToolboxMemMoveRequest_t request msg\n");
+				_debug_dump_mf(mem_move_request,
+							ioc->request_sz/4);
+			}
+		} else
+			ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz,
+			    data_in_dma, data_in_sz);
+		ioc->put_smid_default(ioc, smid);
+		break;
+	}
+	case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
+	{
+		Mpi2SasIoUnitControlRequest_t *sasiounit_request =
+		    (Mpi2SasIoUnitControlRequest_t *)mpi_request;
+
+		if (sasiounit_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET
+		    || sasiounit_request->Operation ==
+		    MPI2_SAS_OP_PHY_LINK_RESET) {
+			ioc->ioc_link_reset_in_progress = 1;
+			ioc->ignore_loginfos = 1;
+		}
+		/* drop to default case for posting the request */
+	}
+		fallthrough;
+	default:
+		ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz,
+		    data_in_dma, data_in_sz);
+		ioc->put_smid_default(ioc, smid);
+		break;
+	}
+
+	if (karg.timeout < MPT3_IOCTL_DEFAULT_TIMEOUT)
+		timeout = MPT3_IOCTL_DEFAULT_TIMEOUT;
+	else
+		timeout = karg.timeout;
+	wait_for_completion_timeout(&ioc->ctl_cmds.done, timeout*HZ);
+	if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
+		Mpi2SCSITaskManagementRequest_t *tm_request =
+		    (Mpi2SCSITaskManagementRequest_t *)mpi_request;
+		mpt3sas_scsih_clear_tm_flag(ioc, le16_to_cpu(
+		    tm_request->DevHandle));
+		mpt3sas_trigger_master(ioc, MASTER_TRIGGER_TASK_MANAGMENT);
+	} else if ((mpi_request->Function == MPI2_FUNCTION_SMP_PASSTHROUGH ||
+	    mpi_request->Function == MPI2_FUNCTION_SAS_IO_UNIT_CONTROL) &&
+		ioc->ioc_link_reset_in_progress) {
+		ioc->ioc_link_reset_in_progress = 0;
+		ioc->ignore_loginfos = 0;
+	}
+	if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
+		mpt3sas_check_cmd_timeout(ioc,
+		    ioc->ctl_cmds.status, mpi_request,
+		    karg.data_sge_offset, issue_reset);
+		goto issue_host_reset;
+	}
+
+	mpi_reply = ioc->ctl_cmds.reply;
+
+	if (mpi_reply->Function == MPI2_FUNCTION_SCSI_TASK_MGMT &&
+	    (ioc->logging_level & MPT_DEBUG_TM)) {
+		Mpi2SCSITaskManagementReply_t *tm_reply =
+		    (Mpi2SCSITaskManagementReply_t *)mpi_reply;
+
+		ioc_info(ioc, "TASK_MGMT: IOCStatus(0x%04x), IOCLogInfo(0x%08x), TerminationCount(0x%08x)\n",
+			 le16_to_cpu(tm_reply->IOCStatus),
+			 le32_to_cpu(tm_reply->IOCLogInfo),
+			 le32_to_cpu(tm_reply->TerminationCount));
+	}
+
+	/* copy out xdata to user */
+	if (data_in_sz) {
+		if (copy_to_user(karg.data_in_buf_ptr, data_in,
+		    data_in_sz)) {
+			pr_err("failure at %s:%d/%s()!\n", __FILE__,
+			    __LINE__, __func__);
+			ret = -ENODATA;
+			goto out;
+		}
+	}
+
+	/* copy out reply message frame to user */
+	if (karg.max_reply_bytes) {
+		sz = min_t(u32, karg.max_reply_bytes, ioc->reply_sz);
+		if (copy_to_user(karg.reply_frame_buf_ptr, ioc->ctl_cmds.reply,
+		    sz)) {
+			pr_err("failure at %s:%d/%s()!\n", __FILE__,
+			    __LINE__, __func__);
+			ret = -ENODATA;
+			goto out;
+		}
+	}
+
+	/* copy out sense/NVMe Error Response to user */
+	if (karg.max_sense_bytes && (mpi_request->Function ==
+	    MPI2_FUNCTION_SCSI_IO_REQUEST || mpi_request->Function ==
+	    MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH || mpi_request->Function ==
+	    MPI2_FUNCTION_NVME_ENCAPSULATED)) {
+		if (karg.sense_data_ptr == NULL) {
+			ioc_info(ioc, "Response buffer provided by application is NULL; Response data will not be returned\n");
+			goto out;
+		}
+		sz_arg = (mpi_request->Function ==
+		MPI2_FUNCTION_NVME_ENCAPSULATED) ? NVME_ERROR_RESPONSE_SIZE :
+							SCSI_SENSE_BUFFERSIZE;
+		sz = min_t(u32, karg.max_sense_bytes, sz_arg);
+		if (copy_to_user(karg.sense_data_ptr, ioc->ctl_cmds.sense,
+		    sz)) {
+			pr_err("failure at %s:%d/%s()!\n", __FILE__,
+				__LINE__, __func__);
+			ret = -ENODATA;
+			goto out;
+		}
+	}
+
+ issue_host_reset:
+	if (issue_reset) {
+		ret = -ENODATA;
+		if ((mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
+		    mpi_request->Function ==
+		    MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
+		    mpi_request->Function == MPI2_FUNCTION_SATA_PASSTHROUGH)) {
+			ioc_info(ioc, "issue target reset: handle = (0x%04x)\n",
+				 le16_to_cpu(mpi_request->FunctionDependent1));
+			mpt3sas_halt_firmware(ioc);
+			pcie_device = mpt3sas_get_pdev_by_handle(ioc,
+				le16_to_cpu(mpi_request->FunctionDependent1));
+			if (pcie_device && (!ioc->tm_custom_handling) &&
+			    (!(mpt3sas_scsih_is_pcie_scsi_device(
+			    pcie_device->device_info))))
+				mpt3sas_scsih_issue_locked_tm(ioc,
+				  le16_to_cpu(mpi_request->FunctionDependent1),
+				  0, 0, 0,
+				  MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0,
+				  0, pcie_device->reset_timeout,
+			MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE);
+			else
+				mpt3sas_scsih_issue_locked_tm(ioc,
+				  le16_to_cpu(mpi_request->FunctionDependent1),
+				  0, 0, 0,
+				  MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0,
+				  0, 30, MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET);
+		} else
+			mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+	}
+
+ out:
+	if (pcie_device)
+		pcie_device_put(pcie_device);
+
+	/* free memory associated with sg buffers */
+	if (data_in)
+		dma_free_coherent(&ioc->pdev->dev, data_in_sz, data_in,
+		    data_in_dma);
+
+	if (data_out)
+		dma_free_coherent(&ioc->pdev->dev, data_out_sz, data_out,
+		    data_out_dma);
+
+	kfree(mpi_request);
+	ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
+	return ret;
+}
+
+/**
+ * _ctl_getiocinfo - main handler for MPT3IOCINFO opcode
+ * @ioc: per adapter object
+ * @arg: user space buffer containing ioctl content
+ */
+static long
+_ctl_getiocinfo(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_ioctl_iocinfo karg;
+
+	dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
+				 __func__));
+
+	memset(&karg, 0 , sizeof(karg));
+	if (ioc->pfacts)
+		karg.port_number = ioc->pfacts[0].PortNumber;
+	karg.hw_rev = ioc->pdev->revision;
+	karg.pci_id = ioc->pdev->device;
+	karg.subsystem_device = ioc->pdev->subsystem_device;
+	karg.subsystem_vendor = ioc->pdev->subsystem_vendor;
+	karg.pci_information.u.bits.bus = ioc->pdev->bus->number;
+	karg.pci_information.u.bits.device = PCI_SLOT(ioc->pdev->devfn);
+	karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn);
+	karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus);
+	karg.firmware_version = ioc->facts.FWVersion.Word;
+	strcpy(karg.driver_version, ioc->driver_name);
+	strcat(karg.driver_version, "-");
+	switch  (ioc->hba_mpi_version_belonged) {
+	case MPI2_VERSION:
+		if (ioc->is_warpdrive)
+			karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2_SSS6200;
+		else
+			karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2;
+		strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION);
+		break;
+	case MPI25_VERSION:
+	case MPI26_VERSION:
+		if (ioc->is_gen35_ioc)
+			karg.adapter_type = MPT3_IOCTL_INTERFACE_SAS35;
+		else
+			karg.adapter_type = MPT3_IOCTL_INTERFACE_SAS3;
+		strcat(karg.driver_version, MPT3SAS_DRIVER_VERSION);
+		break;
+	}
+	karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
+
+	if (copy_to_user(arg, &karg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+	return 0;
+}
+
+/**
+ * _ctl_eventquery - main handler for MPT3EVENTQUERY opcode
+ * @ioc: per adapter object
+ * @arg: user space buffer containing ioctl content
+ */
+static long
+_ctl_eventquery(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_ioctl_eventquery karg;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
+				 __func__));
+
+	karg.event_entries = MPT3SAS_CTL_EVENT_LOG_SIZE;
+	memcpy(karg.event_types, ioc->event_type,
+	    MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32));
+
+	if (copy_to_user(arg, &karg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+	return 0;
+}
+
+/**
+ * _ctl_eventenable - main handler for MPT3EVENTENABLE opcode
+ * @ioc: per adapter object
+ * @arg: user space buffer containing ioctl content
+ */
+static long
+_ctl_eventenable(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_ioctl_eventenable karg;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
+				 __func__));
+
+	memcpy(ioc->event_type, karg.event_types,
+	    MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32));
+	mpt3sas_base_validate_event_type(ioc, ioc->event_type);
+
+	if (ioc->event_log)
+		return 0;
+	/* initialize event_log */
+	ioc->event_context = 0;
+	ioc->aen_event_read_flag = 0;
+	ioc->event_log = kcalloc(MPT3SAS_CTL_EVENT_LOG_SIZE,
+	    sizeof(struct MPT3_IOCTL_EVENTS), GFP_KERNEL);
+	if (!ioc->event_log) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+/**
+ * _ctl_eventreport - main handler for MPT3EVENTREPORT opcode
+ * @ioc: per adapter object
+ * @arg: user space buffer containing ioctl content
+ */
+static long
+_ctl_eventreport(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_ioctl_eventreport karg;
+	u32 number_bytes, max_events, max;
+	struct mpt3_ioctl_eventreport __user *uarg = arg;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
+				 __func__));
+
+	number_bytes = karg.hdr.max_data_size -
+	    sizeof(struct mpt3_ioctl_header);
+	max_events = number_bytes/sizeof(struct MPT3_IOCTL_EVENTS);
+	max = min_t(u32, MPT3SAS_CTL_EVENT_LOG_SIZE, max_events);
+
+	/* If fewer than 1 event is requested, there must have
+	 * been some type of error.
+	 */
+	if (!max || !ioc->event_log)
+		return -ENODATA;
+
+	number_bytes = max * sizeof(struct MPT3_IOCTL_EVENTS);
+	if (copy_to_user(uarg->event_data, ioc->event_log, number_bytes)) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	/* reset flag so SIGIO can restart */
+	ioc->aen_event_read_flag = 0;
+	return 0;
+}
+
+/**
+ * _ctl_do_reset - main handler for MPT3HARDRESET opcode
+ * @ioc: per adapter object
+ * @arg: user space buffer containing ioctl content
+ */
+static long
+_ctl_do_reset(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_ioctl_diag_reset karg;
+	int retval;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	if (ioc->shost_recovery || ioc->pci_error_recovery ||
+	    ioc->is_driver_loading)
+		return -EAGAIN;
+
+	dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
+				 __func__));
+
+	ioc->reset_from_user = 1;
+	retval = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+	ioc_info(ioc,
+	    "Ioctl: host reset: %s\n", ((!retval) ? "SUCCESS" : "FAILED"));
+	return 0;
+}
+
+/**
+ * _ctl_btdh_search_sas_device - searching for sas device
+ * @ioc: per adapter object
+ * @btdh: btdh ioctl payload
+ */
+static int
+_ctl_btdh_search_sas_device(struct MPT3SAS_ADAPTER *ioc,
+	struct mpt3_ioctl_btdh_mapping *btdh)
+{
+	struct _sas_device *sas_device;
+	unsigned long flags;
+	int rc = 0;
+
+	if (list_empty(&ioc->sas_device_list))
+		return rc;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
+		if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
+		    btdh->handle == sas_device->handle) {
+			btdh->bus = sas_device->channel;
+			btdh->id = sas_device->id;
+			rc = 1;
+			goto out;
+		} else if (btdh->bus == sas_device->channel && btdh->id ==
+		    sas_device->id && btdh->handle == 0xFFFF) {
+			btdh->handle = sas_device->handle;
+			rc = 1;
+			goto out;
+		}
+	}
+ out:
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	return rc;
+}
+
+/**
+ * _ctl_btdh_search_pcie_device - searching for pcie device
+ * @ioc: per adapter object
+ * @btdh: btdh ioctl payload
+ */
+static int
+_ctl_btdh_search_pcie_device(struct MPT3SAS_ADAPTER *ioc,
+	struct mpt3_ioctl_btdh_mapping *btdh)
+{
+	struct _pcie_device *pcie_device;
+	unsigned long flags;
+	int rc = 0;
+
+	if (list_empty(&ioc->pcie_device_list))
+		return rc;
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	list_for_each_entry(pcie_device, &ioc->pcie_device_list, list) {
+		if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
+			   btdh->handle == pcie_device->handle) {
+			btdh->bus = pcie_device->channel;
+			btdh->id = pcie_device->id;
+			rc = 1;
+			goto out;
+		} else if (btdh->bus == pcie_device->channel && btdh->id ==
+			   pcie_device->id && btdh->handle == 0xFFFF) {
+			btdh->handle = pcie_device->handle;
+			rc = 1;
+			goto out;
+		}
+	}
+ out:
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+	return rc;
+}
+
+/**
+ * _ctl_btdh_search_raid_device - searching for raid device
+ * @ioc: per adapter object
+ * @btdh: btdh ioctl payload
+ */
+static int
+_ctl_btdh_search_raid_device(struct MPT3SAS_ADAPTER *ioc,
+	struct mpt3_ioctl_btdh_mapping *btdh)
+{
+	struct _raid_device *raid_device;
+	unsigned long flags;
+	int rc = 0;
+
+	if (list_empty(&ioc->raid_device_list))
+		return rc;
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
+		if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
+		    btdh->handle == raid_device->handle) {
+			btdh->bus = raid_device->channel;
+			btdh->id = raid_device->id;
+			rc = 1;
+			goto out;
+		} else if (btdh->bus == raid_device->channel && btdh->id ==
+		    raid_device->id && btdh->handle == 0xFFFF) {
+			btdh->handle = raid_device->handle;
+			rc = 1;
+			goto out;
+		}
+	}
+ out:
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+	return rc;
+}
+
+/**
+ * _ctl_btdh_mapping - main handler for MPT3BTDHMAPPING opcode
+ * @ioc: per adapter object
+ * @arg: user space buffer containing ioctl content
+ */
+static long
+_ctl_btdh_mapping(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_ioctl_btdh_mapping karg;
+	int rc;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	dctlprintk(ioc, ioc_info(ioc, "%s\n",
+				 __func__));
+
+	rc = _ctl_btdh_search_sas_device(ioc, &karg);
+	if (!rc)
+		rc = _ctl_btdh_search_pcie_device(ioc, &karg);
+	if (!rc)
+		_ctl_btdh_search_raid_device(ioc, &karg);
+
+	if (copy_to_user(arg, &karg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+	return 0;
+}
+
+/**
+ * _ctl_diag_capability - return diag buffer capability
+ * @ioc: per adapter object
+ * @buffer_type: specifies either TRACE, SNAPSHOT, or EXTENDED
+ *
+ * returns 1 when diag buffer support is enabled in firmware
+ */
+static u8
+_ctl_diag_capability(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type)
+{
+	u8 rc = 0;
+
+	switch (buffer_type) {
+	case MPI2_DIAG_BUF_TYPE_TRACE:
+		if (ioc->facts.IOCCapabilities &
+		    MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER)
+			rc = 1;
+		break;
+	case MPI2_DIAG_BUF_TYPE_SNAPSHOT:
+		if (ioc->facts.IOCCapabilities &
+		    MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER)
+			rc = 1;
+		break;
+	case MPI2_DIAG_BUF_TYPE_EXTENDED:
+		if (ioc->facts.IOCCapabilities &
+		    MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER)
+			rc = 1;
+	}
+
+	return rc;
+}
+
+/**
+ * _ctl_diag_get_bufftype - return diag buffer type
+ *              either TRACE, SNAPSHOT, or EXTENDED
+ * @ioc: per adapter object
+ * @unique_id: specifies the unique_id for the buffer
+ *
+ * returns MPT3_DIAG_UID_NOT_FOUND if the id not found
+ */
+static u8
+_ctl_diag_get_bufftype(struct MPT3SAS_ADAPTER *ioc, u32 unique_id)
+{
+	u8  index;
+
+	for (index = 0; index < MPI2_DIAG_BUF_TYPE_COUNT; index++) {
+		if (ioc->unique_id[index] == unique_id)
+			return index;
+	}
+
+	return MPT3_DIAG_UID_NOT_FOUND;
+}
+
+/**
+ * _ctl_diag_register_2 - wrapper for registering diag buffer support
+ * @ioc: per adapter object
+ * @diag_register: the diag_register struct passed in from user space
+ *
+ */
+static long
+_ctl_diag_register_2(struct MPT3SAS_ADAPTER *ioc,
+	struct mpt3_diag_register *diag_register)
+{
+	int rc, i;
+	void *request_data = NULL;
+	dma_addr_t request_data_dma;
+	u32 request_data_sz = 0;
+	Mpi2DiagBufferPostRequest_t *mpi_request;
+	Mpi2DiagBufferPostReply_t *mpi_reply;
+	u8 buffer_type;
+	u16 smid;
+	u16 ioc_status;
+	u32 ioc_state;
+	u8 issue_reset = 0;
+
+	dctlprintk(ioc, ioc_info(ioc, "%s\n",
+				 __func__));
+
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		ioc_err(ioc, "%s: failed due to ioc not operational\n",
+			__func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) {
+		ioc_err(ioc, "%s: ctl_cmd in use\n", __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	buffer_type = diag_register->buffer_type;
+	if (!_ctl_diag_capability(ioc, buffer_type)) {
+		ioc_err(ioc, "%s: doesn't have capability for buffer_type(0x%02x)\n",
+			__func__, buffer_type);
+		return -EPERM;
+	}
+
+	if (diag_register->unique_id == 0) {
+		ioc_err(ioc,
+		    "%s: Invalid UID(0x%08x), buffer_type(0x%02x)\n", __func__,
+		    diag_register->unique_id, buffer_type);
+		return -EINVAL;
+	}
+
+	if ((ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_APP_OWNED) &&
+	    !(ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED)) {
+		ioc_err(ioc,
+		    "%s: buffer_type(0x%02x) is already registered by application with UID(0x%08x)\n",
+		    __func__, buffer_type, ioc->unique_id[buffer_type]);
+		return -EINVAL;
+	}
+
+	if (ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) {
+		/*
+		 * If driver posts buffer initially, then an application wants
+		 * to Register that buffer (own it) without Releasing first,
+		 * the application Register command MUST have the same buffer
+		 * type and size in the Register command (obtained from the
+		 * Query command). Otherwise that Register command will be
+		 * failed. If the application has released the buffer but wants
+		 * to re-register it, it should be allowed as long as the
+		 * Unique-Id/Size match.
+		 */
+
+		if (ioc->unique_id[buffer_type] == MPT3DIAGBUFFUNIQUEID &&
+		    ioc->diag_buffer_sz[buffer_type] ==
+		    diag_register->requested_buffer_size) {
+
+			if (!(ioc->diag_buffer_status[buffer_type] &
+			     MPT3_DIAG_BUFFER_IS_RELEASED)) {
+				dctlprintk(ioc, ioc_info(ioc,
+				    "%s: diag_buffer (%d) ownership changed. old-ID(0x%08x), new-ID(0x%08x)\n",
+				    __func__, buffer_type,
+				    ioc->unique_id[buffer_type],
+				    diag_register->unique_id));
+
+				/*
+				 * Application wants to own the buffer with
+				 * the same size.
+				 */
+				ioc->unique_id[buffer_type] =
+				    diag_register->unique_id;
+				rc = 0; /* success */
+				goto out;
+			}
+		} else if (ioc->unique_id[buffer_type] !=
+		    MPT3DIAGBUFFUNIQUEID) {
+			if (ioc->unique_id[buffer_type] !=
+			    diag_register->unique_id ||
+			    ioc->diag_buffer_sz[buffer_type] !=
+			    diag_register->requested_buffer_size ||
+			    !(ioc->diag_buffer_status[buffer_type] &
+			    MPT3_DIAG_BUFFER_IS_RELEASED)) {
+				ioc_err(ioc,
+				    "%s: already has a registered buffer for buffer_type(0x%02x)\n",
+				    __func__, buffer_type);
+				return -EINVAL;
+			}
+		} else {
+			ioc_err(ioc, "%s: already has a registered buffer for buffer_type(0x%02x)\n",
+			    __func__, buffer_type);
+			return -EINVAL;
+		}
+	} else if (ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED) {
+
+		if (ioc->unique_id[buffer_type] != MPT3DIAGBUFFUNIQUEID ||
+		    ioc->diag_buffer_sz[buffer_type] !=
+		    diag_register->requested_buffer_size) {
+
+			ioc_err(ioc,
+			    "%s: already a buffer is allocated for buffer_type(0x%02x) of size %d bytes, so please try registering again with same size\n",
+			     __func__, buffer_type,
+			    ioc->diag_buffer_sz[buffer_type]);
+			return -EINVAL;
+		}
+	}
+
+	if (diag_register->requested_buffer_size % 4)  {
+		ioc_err(ioc, "%s: the requested_buffer_size is not 4 byte aligned\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->ctl_cb_idx);
+	if (!smid) {
+		ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	rc = 0;
+	ioc->ctl_cmds.status = MPT3_CMD_PENDING;
+	memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	memset(mpi_request, 0, ioc->request_sz);
+	ioc->ctl_cmds.smid = smid;
+
+	request_data = ioc->diag_buffer[buffer_type];
+	request_data_sz = diag_register->requested_buffer_size;
+	ioc->unique_id[buffer_type] = diag_register->unique_id;
+	/* Reset ioc variables used for additional query commands */
+	ioc->reset_from_user = 0;
+	memset(&ioc->htb_rel, 0, sizeof(struct htb_rel_query));
+	ioc->diag_buffer_status[buffer_type] &=
+	    MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED;
+	memcpy(ioc->product_specific[buffer_type],
+	    diag_register->product_specific, MPT3_PRODUCT_SPECIFIC_DWORDS);
+	ioc->diagnostic_flags[buffer_type] = diag_register->diagnostic_flags;
+
+	if (request_data) {
+		request_data_dma = ioc->diag_buffer_dma[buffer_type];
+		if (request_data_sz != ioc->diag_buffer_sz[buffer_type]) {
+			dma_free_coherent(&ioc->pdev->dev,
+					ioc->diag_buffer_sz[buffer_type],
+					request_data, request_data_dma);
+			request_data = NULL;
+		}
+	}
+
+	if (request_data == NULL) {
+		ioc->diag_buffer_sz[buffer_type] = 0;
+		ioc->diag_buffer_dma[buffer_type] = 0;
+		request_data = dma_alloc_coherent(&ioc->pdev->dev,
+				request_data_sz, &request_data_dma, GFP_KERNEL);
+		if (request_data == NULL) {
+			ioc_err(ioc, "%s: failed allocating memory for diag buffers, requested size(%d)\n",
+				__func__, request_data_sz);
+			mpt3sas_base_free_smid(ioc, smid);
+			rc = -ENOMEM;
+			goto out;
+		}
+		ioc->diag_buffer[buffer_type] = request_data;
+		ioc->diag_buffer_sz[buffer_type] = request_data_sz;
+		ioc->diag_buffer_dma[buffer_type] = request_data_dma;
+	}
+
+	mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
+	mpi_request->BufferType = diag_register->buffer_type;
+	mpi_request->Flags = cpu_to_le32(diag_register->diagnostic_flags);
+	mpi_request->BufferAddress = cpu_to_le64(request_data_dma);
+	mpi_request->BufferLength = cpu_to_le32(request_data_sz);
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
+
+	dctlprintk(ioc,
+		   ioc_info(ioc, "%s: diag_buffer(0x%p), dma(0x%llx), sz(%d)\n",
+			    __func__, request_data,
+			    (unsigned long long)request_data_dma,
+			    le32_to_cpu(mpi_request->BufferLength)));
+
+	for (i = 0; i < MPT3_PRODUCT_SPECIFIC_DWORDS; i++)
+		mpi_request->ProductSpecific[i] =
+			cpu_to_le32(ioc->product_specific[buffer_type][i]);
+
+	init_completion(&ioc->ctl_cmds.done);
+	ioc->put_smid_default(ioc, smid);
+	wait_for_completion_timeout(&ioc->ctl_cmds.done,
+	    MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
+
+	if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
+		mpt3sas_check_cmd_timeout(ioc,
+		    ioc->ctl_cmds.status, mpi_request,
+		    sizeof(Mpi2DiagBufferPostRequest_t)/4, issue_reset);
+		goto issue_host_reset;
+	}
+
+	/* process the completed Reply Message Frame */
+	if ((ioc->ctl_cmds.status & MPT3_CMD_REPLY_VALID) == 0) {
+		ioc_err(ioc, "%s: no reply message\n", __func__);
+		rc = -EFAULT;
+		goto out;
+	}
+
+	mpi_reply = ioc->ctl_cmds.reply;
+	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+
+	if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+		ioc->diag_buffer_status[buffer_type] |=
+			MPT3_DIAG_BUFFER_IS_REGISTERED;
+		dctlprintk(ioc, ioc_info(ioc, "%s: success\n", __func__));
+	} else {
+		ioc_info(ioc, "%s: ioc_status(0x%04x) log_info(0x%08x)\n",
+			 __func__,
+			 ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
+		rc = -EFAULT;
+	}
+
+ issue_host_reset:
+	if (issue_reset)
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+
+ out:
+
+	if (rc && request_data) {
+		dma_free_coherent(&ioc->pdev->dev, request_data_sz,
+		    request_data, request_data_dma);
+		ioc->diag_buffer[buffer_type] = NULL;
+		ioc->diag_buffer_status[buffer_type] &=
+		    ~MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED;
+	}
+
+	ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
+	return rc;
+}
+
+/**
+ * mpt3sas_enable_diag_buffer - enabling diag_buffers support driver load time
+ * @ioc: per adapter object
+ * @bits_to_register: bitwise field where trace is bit 0, and snapshot is bit 1
+ *
+ * This is called when command line option diag_buffer_enable is enabled
+ * at driver load time.
+ */
+void
+mpt3sas_enable_diag_buffer(struct MPT3SAS_ADAPTER *ioc, u8 bits_to_register)
+{
+	struct mpt3_diag_register diag_register;
+	u32 ret_val;
+	u32 trace_buff_size = ioc->manu_pg11.HostTraceBufferMaxSizeKB<<10;
+	u32 min_trace_buff_size = 0;
+	u32 decr_trace_buff_size = 0;
+
+	memset(&diag_register, 0, sizeof(struct mpt3_diag_register));
+
+	if (bits_to_register & 1) {
+		ioc_info(ioc, "registering trace buffer support\n");
+		ioc->diag_trigger_master.MasterData =
+		    (MASTER_TRIGGER_FW_FAULT + MASTER_TRIGGER_ADAPTER_RESET);
+		diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_TRACE;
+		diag_register.unique_id =
+		    (ioc->hba_mpi_version_belonged == MPI2_VERSION) ?
+		    (MPT2DIAGBUFFUNIQUEID):(MPT3DIAGBUFFUNIQUEID);
+
+		if (trace_buff_size != 0) {
+			diag_register.requested_buffer_size = trace_buff_size;
+			min_trace_buff_size =
+			    ioc->manu_pg11.HostTraceBufferMinSizeKB<<10;
+			decr_trace_buff_size =
+			    ioc->manu_pg11.HostTraceBufferDecrementSizeKB<<10;
+
+			if (min_trace_buff_size > trace_buff_size) {
+				/* The buff size is not set correctly */
+				ioc_err(ioc,
+				    "Min Trace Buff size (%d KB) greater than Max Trace Buff size (%d KB)\n",
+				     min_trace_buff_size>>10,
+				     trace_buff_size>>10);
+				ioc_err(ioc,
+				    "Using zero Min Trace Buff Size\n");
+				min_trace_buff_size = 0;
+			}
+
+			if (decr_trace_buff_size == 0) {
+				/*
+				 * retry the min size if decrement
+				 * is not available.
+				 */
+				decr_trace_buff_size =
+				    trace_buff_size - min_trace_buff_size;
+			}
+		} else {
+			/* register for 2MB buffers  */
+			diag_register.requested_buffer_size = 2 * (1024 * 1024);
+		}
+
+		do {
+			ret_val = _ctl_diag_register_2(ioc,  &diag_register);
+
+			if (ret_val == -ENOMEM && min_trace_buff_size &&
+			    (trace_buff_size - decr_trace_buff_size) >=
+			    min_trace_buff_size) {
+				/* adjust the buffer size */
+				trace_buff_size -= decr_trace_buff_size;
+				diag_register.requested_buffer_size =
+				    trace_buff_size;
+			} else
+				break;
+		} while (true);
+
+		if (ret_val == -ENOMEM)
+			ioc_err(ioc,
+			    "Cannot allocate trace buffer memory. Last memory tried = %d KB\n",
+			    diag_register.requested_buffer_size>>10);
+		else if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE]
+		    & MPT3_DIAG_BUFFER_IS_REGISTERED) {
+			ioc_info(ioc, "Trace buffer memory %d KB allocated\n",
+			    diag_register.requested_buffer_size>>10);
+			if (ioc->hba_mpi_version_belonged != MPI2_VERSION)
+				ioc->diag_buffer_status[
+				    MPI2_DIAG_BUF_TYPE_TRACE] |=
+				    MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED;
+		}
+	}
+
+	if (bits_to_register & 2) {
+		ioc_info(ioc, "registering snapshot buffer support\n");
+		diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_SNAPSHOT;
+		/* register for 2MB buffers  */
+		diag_register.requested_buffer_size = 2 * (1024 * 1024);
+		diag_register.unique_id = 0x7075901;
+		_ctl_diag_register_2(ioc,  &diag_register);
+	}
+
+	if (bits_to_register & 4) {
+		ioc_info(ioc, "registering extended buffer support\n");
+		diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_EXTENDED;
+		/* register for 2MB buffers  */
+		diag_register.requested_buffer_size = 2 * (1024 * 1024);
+		diag_register.unique_id = 0x7075901;
+		_ctl_diag_register_2(ioc,  &diag_register);
+	}
+}
+
+/**
+ * _ctl_diag_register - application register with driver
+ * @ioc: per adapter object
+ * @arg: user space buffer containing ioctl content
+ *
+ * This will allow the driver to setup any required buffers that will be
+ * needed by firmware to communicate with the driver.
+ */
+static long
+_ctl_diag_register(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_diag_register karg;
+	long rc;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	rc = _ctl_diag_register_2(ioc, &karg);
+
+	if (!rc && (ioc->diag_buffer_status[karg.buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED))
+		ioc->diag_buffer_status[karg.buffer_type] |=
+		    MPT3_DIAG_BUFFER_IS_APP_OWNED;
+
+	return rc;
+}
+
+/**
+ * _ctl_diag_unregister - application unregister with driver
+ * @ioc: per adapter object
+ * @arg: user space buffer containing ioctl content
+ *
+ * This will allow the driver to cleanup any memory allocated for diag
+ * messages and to free up any resources.
+ */
+static long
+_ctl_diag_unregister(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_diag_unregister karg;
+	void *request_data;
+	dma_addr_t request_data_dma;
+	u32 request_data_sz;
+	u8 buffer_type;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	dctlprintk(ioc, ioc_info(ioc, "%s\n",
+				 __func__));
+
+	buffer_type = _ctl_diag_get_bufftype(ioc, karg.unique_id);
+	if (buffer_type == MPT3_DIAG_UID_NOT_FOUND) {
+		ioc_err(ioc, "%s: buffer with unique_id(0x%08x) not found\n",
+		    __func__, karg.unique_id);
+		return -EINVAL;
+	}
+
+	if (!_ctl_diag_capability(ioc, buffer_type)) {
+		ioc_err(ioc, "%s: doesn't have capability for buffer_type(0x%02x)\n",
+			__func__, buffer_type);
+		return -EPERM;
+	}
+
+	if ((ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		ioc_err(ioc, "%s: buffer_type(0x%02x) is not registered\n",
+			__func__, buffer_type);
+		return -EINVAL;
+	}
+	if ((ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED) == 0) {
+		ioc_err(ioc, "%s: buffer_type(0x%02x) has not been released\n",
+			__func__, buffer_type);
+		return -EINVAL;
+	}
+
+	if (karg.unique_id != ioc->unique_id[buffer_type]) {
+		ioc_err(ioc, "%s: unique_id(0x%08x) is not registered\n",
+			__func__, karg.unique_id);
+		return -EINVAL;
+	}
+
+	request_data = ioc->diag_buffer[buffer_type];
+	if (!request_data) {
+		ioc_err(ioc, "%s: doesn't have memory allocated for buffer_type(0x%02x)\n",
+			__func__, buffer_type);
+		return -ENOMEM;
+	}
+
+	if (ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED) {
+		ioc->unique_id[buffer_type] = MPT3DIAGBUFFUNIQUEID;
+		ioc->diag_buffer_status[buffer_type] &=
+		    ~MPT3_DIAG_BUFFER_IS_APP_OWNED;
+		ioc->diag_buffer_status[buffer_type] &=
+		    ~MPT3_DIAG_BUFFER_IS_REGISTERED;
+	} else {
+		request_data_sz = ioc->diag_buffer_sz[buffer_type];
+		request_data_dma = ioc->diag_buffer_dma[buffer_type];
+		dma_free_coherent(&ioc->pdev->dev, request_data_sz,
+				request_data, request_data_dma);
+		ioc->diag_buffer[buffer_type] = NULL;
+		ioc->diag_buffer_status[buffer_type] = 0;
+	}
+	return 0;
+}
+
+/**
+ * _ctl_diag_query - query relevant info associated with diag buffers
+ * @ioc: per adapter object
+ * @arg: user space buffer containing ioctl content
+ *
+ * The application will send only buffer_type and unique_id.  Driver will
+ * inspect unique_id first, if valid, fill in all the info.  If unique_id is
+ * 0x00, the driver will return info specified by Buffer Type.
+ */
+static long
+_ctl_diag_query(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_diag_query karg;
+	void *request_data;
+	int i;
+	u8 buffer_type;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	dctlprintk(ioc, ioc_info(ioc, "%s\n",
+				 __func__));
+
+	karg.application_flags = 0;
+	buffer_type = karg.buffer_type;
+
+	if (!_ctl_diag_capability(ioc, buffer_type)) {
+		ioc_err(ioc, "%s: doesn't have capability for buffer_type(0x%02x)\n",
+			__func__, buffer_type);
+		return -EPERM;
+	}
+
+	if (!(ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED)) {
+		if ((ioc->diag_buffer_status[buffer_type] &
+		    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+			ioc_err(ioc, "%s: buffer_type(0x%02x) is not registered\n",
+				__func__, buffer_type);
+			return -EINVAL;
+		}
+	}
+
+	if (karg.unique_id) {
+		if (karg.unique_id != ioc->unique_id[buffer_type]) {
+			ioc_err(ioc, "%s: unique_id(0x%08x) is not registered\n",
+				__func__, karg.unique_id);
+			return -EINVAL;
+		}
+	}
+
+	request_data = ioc->diag_buffer[buffer_type];
+	if (!request_data) {
+		ioc_err(ioc, "%s: doesn't have buffer for buffer_type(0x%02x)\n",
+			__func__, buffer_type);
+		return -ENOMEM;
+	}
+
+	if ((ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED))
+		karg.application_flags |= MPT3_APP_FLAGS_BUFFER_VALID;
+
+	if (!(ioc->diag_buffer_status[buffer_type] &
+	     MPT3_DIAG_BUFFER_IS_RELEASED))
+		karg.application_flags |= MPT3_APP_FLAGS_FW_BUFFER_ACCESS;
+
+	if (!(ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED))
+		karg.application_flags |= MPT3_APP_FLAGS_DYNAMIC_BUFFER_ALLOC;
+
+	if ((ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_APP_OWNED))
+		karg.application_flags |= MPT3_APP_FLAGS_APP_OWNED;
+
+	for (i = 0; i < MPT3_PRODUCT_SPECIFIC_DWORDS; i++)
+		karg.product_specific[i] =
+		    ioc->product_specific[buffer_type][i];
+
+	karg.total_buffer_size = ioc->diag_buffer_sz[buffer_type];
+	karg.driver_added_buffer_size = 0;
+	karg.unique_id = ioc->unique_id[buffer_type];
+	karg.diagnostic_flags = ioc->diagnostic_flags[buffer_type];
+
+	if (copy_to_user(arg, &karg, sizeof(struct mpt3_diag_query))) {
+		ioc_err(ioc, "%s: unable to write mpt3_diag_query data @ %p\n",
+			__func__, arg);
+		return -EFAULT;
+	}
+	return 0;
+}
+
+/**
+ * mpt3sas_send_diag_release - Diag Release Message
+ * @ioc: per adapter object
+ * @buffer_type: specifies either TRACE, SNAPSHOT, or EXTENDED
+ * @issue_reset: specifies whether host reset is required.
+ *
+ */
+int
+mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type,
+	u8 *issue_reset)
+{
+	Mpi2DiagReleaseRequest_t *mpi_request;
+	Mpi2DiagReleaseReply_t *mpi_reply;
+	u16 smid;
+	u16 ioc_status;
+	u32 ioc_state;
+	int rc;
+	u8 reset_needed = 0;
+
+	dctlprintk(ioc, ioc_info(ioc, "%s\n",
+				 __func__));
+
+	rc = 0;
+	*issue_reset = 0;
+
+
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		if (ioc->diag_buffer_status[buffer_type] &
+		    MPT3_DIAG_BUFFER_IS_REGISTERED)
+			ioc->diag_buffer_status[buffer_type] |=
+			    MPT3_DIAG_BUFFER_IS_RELEASED;
+		dctlprintk(ioc,
+			   ioc_info(ioc, "%s: skipping due to FAULT state\n",
+				    __func__));
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) {
+		ioc_err(ioc, "%s: ctl_cmd in use\n", __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->ctl_cb_idx);
+	if (!smid) {
+		ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	ioc->ctl_cmds.status = MPT3_CMD_PENDING;
+	memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	memset(mpi_request, 0, ioc->request_sz);
+	ioc->ctl_cmds.smid = smid;
+
+	mpi_request->Function = MPI2_FUNCTION_DIAG_RELEASE;
+	mpi_request->BufferType = buffer_type;
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
+
+	init_completion(&ioc->ctl_cmds.done);
+	ioc->put_smid_default(ioc, smid);
+	wait_for_completion_timeout(&ioc->ctl_cmds.done,
+	    MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
+
+	if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
+		mpt3sas_check_cmd_timeout(ioc,
+		    ioc->ctl_cmds.status, mpi_request,
+		    sizeof(Mpi2DiagReleaseRequest_t)/4, reset_needed);
+		*issue_reset = reset_needed;
+		rc = -EFAULT;
+		goto out;
+	}
+
+	/* process the completed Reply Message Frame */
+	if ((ioc->ctl_cmds.status & MPT3_CMD_REPLY_VALID) == 0) {
+		ioc_err(ioc, "%s: no reply message\n", __func__);
+		rc = -EFAULT;
+		goto out;
+	}
+
+	mpi_reply = ioc->ctl_cmds.reply;
+	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+
+	if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+		ioc->diag_buffer_status[buffer_type] |=
+		    MPT3_DIAG_BUFFER_IS_RELEASED;
+		dctlprintk(ioc, ioc_info(ioc, "%s: success\n", __func__));
+	} else {
+		ioc_info(ioc, "%s: ioc_status(0x%04x) log_info(0x%08x)\n",
+			 __func__,
+			 ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
+		rc = -EFAULT;
+	}
+
+ out:
+	ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
+	return rc;
+}
+
+/**
+ * _ctl_diag_release - request to send Diag Release Message to firmware
+ * @ioc: ?
+ * @arg: user space buffer containing ioctl content
+ *
+ * This allows ownership of the specified buffer to returned to the driver,
+ * allowing an application to read the buffer without fear that firmware is
+ * overwriting information in the buffer.
+ */
+static long
+_ctl_diag_release(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_diag_release karg;
+	void *request_data;
+	int rc;
+	u8 buffer_type;
+	u8 issue_reset = 0;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	dctlprintk(ioc, ioc_info(ioc, "%s\n",
+				 __func__));
+
+	buffer_type = _ctl_diag_get_bufftype(ioc, karg.unique_id);
+	if (buffer_type == MPT3_DIAG_UID_NOT_FOUND) {
+		ioc_err(ioc, "%s: buffer with unique_id(0x%08x) not found\n",
+		    __func__, karg.unique_id);
+		return -EINVAL;
+	}
+
+	if (!_ctl_diag_capability(ioc, buffer_type)) {
+		ioc_err(ioc, "%s: doesn't have capability for buffer_type(0x%02x)\n",
+			__func__, buffer_type);
+		return -EPERM;
+	}
+
+	if ((ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		ioc_err(ioc, "%s: buffer_type(0x%02x) is not registered\n",
+			__func__, buffer_type);
+		return -EINVAL;
+	}
+
+	if (karg.unique_id != ioc->unique_id[buffer_type]) {
+		ioc_err(ioc, "%s: unique_id(0x%08x) is not registered\n",
+			__func__, karg.unique_id);
+		return -EINVAL;
+	}
+
+	if (ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED) {
+		ioc_err(ioc, "%s: buffer_type(0x%02x) is already released\n",
+			__func__, buffer_type);
+		return -EINVAL;
+	}
+
+	request_data = ioc->diag_buffer[buffer_type];
+
+	if (!request_data) {
+		ioc_err(ioc, "%s: doesn't have memory allocated for buffer_type(0x%02x)\n",
+			__func__, buffer_type);
+		return -ENOMEM;
+	}
+
+	/* buffers were released by due to host reset */
+	if ((ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_DIAG_RESET)) {
+		ioc->diag_buffer_status[buffer_type] |=
+		    MPT3_DIAG_BUFFER_IS_RELEASED;
+		ioc->diag_buffer_status[buffer_type] &=
+		    ~MPT3_DIAG_BUFFER_IS_DIAG_RESET;
+		ioc_err(ioc, "%s: buffer_type(0x%02x) was released due to host reset\n",
+			__func__, buffer_type);
+		return 0;
+	}
+
+	rc = mpt3sas_send_diag_release(ioc, buffer_type, &issue_reset);
+
+	if (issue_reset)
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+
+	return rc;
+}
+
+/**
+ * _ctl_diag_read_buffer - request for copy of the diag buffer
+ * @ioc: per adapter object
+ * @arg: user space buffer containing ioctl content
+ */
+static long
+_ctl_diag_read_buffer(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_diag_read_buffer karg;
+	struct mpt3_diag_read_buffer __user *uarg = arg;
+	void *request_data, *diag_data;
+	Mpi2DiagBufferPostRequest_t *mpi_request;
+	Mpi2DiagBufferPostReply_t *mpi_reply;
+	int rc, i;
+	u8 buffer_type;
+	unsigned long request_size, copy_size;
+	u16 smid;
+	u16 ioc_status;
+	u8 issue_reset = 0;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	dctlprintk(ioc, ioc_info(ioc, "%s\n",
+				 __func__));
+
+	buffer_type = _ctl_diag_get_bufftype(ioc, karg.unique_id);
+	if (buffer_type == MPT3_DIAG_UID_NOT_FOUND) {
+		ioc_err(ioc, "%s: buffer with unique_id(0x%08x) not found\n",
+		    __func__, karg.unique_id);
+		return -EINVAL;
+	}
+
+	if (!_ctl_diag_capability(ioc, buffer_type)) {
+		ioc_err(ioc, "%s: doesn't have capability for buffer_type(0x%02x)\n",
+			__func__, buffer_type);
+		return -EPERM;
+	}
+
+	if (karg.unique_id != ioc->unique_id[buffer_type]) {
+		ioc_err(ioc, "%s: unique_id(0x%08x) is not registered\n",
+			__func__, karg.unique_id);
+		return -EINVAL;
+	}
+
+	request_data = ioc->diag_buffer[buffer_type];
+	if (!request_data) {
+		ioc_err(ioc, "%s: doesn't have buffer for buffer_type(0x%02x)\n",
+			__func__, buffer_type);
+		return -ENOMEM;
+	}
+
+	request_size = ioc->diag_buffer_sz[buffer_type];
+
+	if ((karg.starting_offset % 4) || (karg.bytes_to_read % 4)) {
+		ioc_err(ioc, "%s: either the starting_offset or bytes_to_read are not 4 byte aligned\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	if (karg.starting_offset > request_size)
+		return -EINVAL;
+
+	diag_data = (void *)(request_data + karg.starting_offset);
+	dctlprintk(ioc,
+		   ioc_info(ioc, "%s: diag_buffer(%p), offset(%d), sz(%d)\n",
+			    __func__, diag_data, karg.starting_offset,
+			    karg.bytes_to_read));
+
+	/* Truncate data on requests that are too large */
+	if ((diag_data + karg.bytes_to_read < diag_data) ||
+	    (diag_data + karg.bytes_to_read > request_data + request_size))
+		copy_size = request_size - karg.starting_offset;
+	else
+		copy_size = karg.bytes_to_read;
+
+	if (copy_to_user((void __user *)uarg->diagnostic_data,
+	    diag_data, copy_size)) {
+		ioc_err(ioc, "%s: Unable to write mpt_diag_read_buffer_t data @ %p\n",
+			__func__, diag_data);
+		return -EFAULT;
+	}
+
+	if ((karg.flags & MPT3_FLAGS_REREGISTER) == 0)
+		return 0;
+
+	dctlprintk(ioc,
+		   ioc_info(ioc, "%s: Reregister buffer_type(0x%02x)\n",
+			    __func__, buffer_type));
+	if ((ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED) == 0) {
+		dctlprintk(ioc,
+			   ioc_info(ioc, "%s: buffer_type(0x%02x) is still registered\n",
+				    __func__, buffer_type));
+		return 0;
+	}
+	/* Get a free request frame and save the message context.
+	*/
+
+	if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) {
+		ioc_err(ioc, "%s: ctl_cmd in use\n", __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->ctl_cb_idx);
+	if (!smid) {
+		ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	rc = 0;
+	ioc->ctl_cmds.status = MPT3_CMD_PENDING;
+	memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	memset(mpi_request, 0, ioc->request_sz);
+	ioc->ctl_cmds.smid = smid;
+
+	mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
+	mpi_request->BufferType = buffer_type;
+	mpi_request->BufferLength =
+	    cpu_to_le32(ioc->diag_buffer_sz[buffer_type]);
+	mpi_request->BufferAddress =
+	    cpu_to_le64(ioc->diag_buffer_dma[buffer_type]);
+	for (i = 0; i < MPT3_PRODUCT_SPECIFIC_DWORDS; i++)
+		mpi_request->ProductSpecific[i] =
+			cpu_to_le32(ioc->product_specific[buffer_type][i]);
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
+
+	init_completion(&ioc->ctl_cmds.done);
+	ioc->put_smid_default(ioc, smid);
+	wait_for_completion_timeout(&ioc->ctl_cmds.done,
+	    MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
+
+	if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
+		mpt3sas_check_cmd_timeout(ioc,
+		    ioc->ctl_cmds.status, mpi_request,
+		    sizeof(Mpi2DiagBufferPostRequest_t)/4, issue_reset);
+		goto issue_host_reset;
+	}
+
+	/* process the completed Reply Message Frame */
+	if ((ioc->ctl_cmds.status & MPT3_CMD_REPLY_VALID) == 0) {
+		ioc_err(ioc, "%s: no reply message\n", __func__);
+		rc = -EFAULT;
+		goto out;
+	}
+
+	mpi_reply = ioc->ctl_cmds.reply;
+	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+
+	if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+		ioc->diag_buffer_status[buffer_type] |=
+		    MPT3_DIAG_BUFFER_IS_REGISTERED;
+		ioc->diag_buffer_status[buffer_type] &=
+		    ~MPT3_DIAG_BUFFER_IS_RELEASED;
+		dctlprintk(ioc, ioc_info(ioc, "%s: success\n", __func__));
+	} else {
+		ioc_info(ioc, "%s: ioc_status(0x%04x) log_info(0x%08x)\n",
+			 __func__, ioc_status,
+			 le32_to_cpu(mpi_reply->IOCLogInfo));
+		rc = -EFAULT;
+	}
+
+ issue_host_reset:
+	if (issue_reset)
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+
+ out:
+
+	ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
+	return rc;
+}
+
+/**
+ * _ctl_addnl_diag_query - query relevant info associated with diag buffers
+ * @ioc: per adapter object
+ * @arg: user space buffer containing ioctl content
+ *
+ * The application will send only unique_id.  Driver will
+ * inspect unique_id first, if valid, fill the details related to cause
+ * for diag buffer release.
+ */
+static long
+_ctl_addnl_diag_query(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	struct mpt3_addnl_diag_query karg;
+	u32 buffer_type = 0;
+
+	if (copy_from_user(&karg, arg, sizeof(karg))) {
+		pr_err("%s: failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+	dctlprintk(ioc, ioc_info(ioc, "%s\n",  __func__));
+	if (karg.unique_id == 0) {
+		ioc_err(ioc, "%s: unique_id is(0x%08x)\n",
+		    __func__, karg.unique_id);
+		return -EPERM;
+	}
+	buffer_type = _ctl_diag_get_bufftype(ioc, karg.unique_id);
+	if (buffer_type == MPT3_DIAG_UID_NOT_FOUND) {
+		ioc_err(ioc, "%s: buffer with unique_id(0x%08x) not found\n",
+		    __func__, karg.unique_id);
+		return -EPERM;
+	}
+	memset(&karg.rel_query, 0, sizeof(karg.rel_query));
+	if ((ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		ioc_info(ioc, "%s: buffer_type(0x%02x) is not registered\n",
+		    __func__, buffer_type);
+		goto out;
+	}
+	if ((ioc->diag_buffer_status[buffer_type] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED) == 0) {
+		ioc_err(ioc, "%s: buffer_type(0x%02x) is not released\n",
+		    __func__, buffer_type);
+		return -EPERM;
+	}
+	memcpy(&karg.rel_query, &ioc->htb_rel, sizeof(karg.rel_query));
+out:
+	if (copy_to_user(arg, &karg, sizeof(struct mpt3_addnl_diag_query))) {
+		ioc_err(ioc, "%s: unable to write mpt3_addnl_diag_query data @ %p\n",
+		    __func__, arg);
+		return -EFAULT;
+	}
+	return 0;
+}
+
+#ifdef CONFIG_COMPAT
+/**
+ * _ctl_compat_mpt_command - convert 32bit pointers to 64bit.
+ * @ioc: per adapter object
+ * @cmd: ioctl opcode
+ * @arg: (struct mpt3_ioctl_command32)
+ *
+ * MPT3COMMAND32 - Handle 32bit applications running on 64bit os.
+ */
+static long
+_ctl_compat_mpt_command(struct MPT3SAS_ADAPTER *ioc, unsigned cmd,
+	void __user *arg)
+{
+	struct mpt3_ioctl_command32 karg32;
+	struct mpt3_ioctl_command32 __user *uarg;
+	struct mpt3_ioctl_command karg;
+
+	if (_IOC_SIZE(cmd) != sizeof(struct mpt3_ioctl_command32))
+		return -EINVAL;
+
+	uarg = (struct mpt3_ioctl_command32 __user *) arg;
+
+	if (copy_from_user(&karg32, (char __user *)arg, sizeof(karg32))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	memset(&karg, 0, sizeof(struct mpt3_ioctl_command));
+	karg.hdr.ioc_number = karg32.hdr.ioc_number;
+	karg.hdr.port_number = karg32.hdr.port_number;
+	karg.hdr.max_data_size = karg32.hdr.max_data_size;
+	karg.timeout = karg32.timeout;
+	karg.max_reply_bytes = karg32.max_reply_bytes;
+	karg.data_in_size = karg32.data_in_size;
+	karg.data_out_size = karg32.data_out_size;
+	karg.max_sense_bytes = karg32.max_sense_bytes;
+	karg.data_sge_offset = karg32.data_sge_offset;
+	karg.reply_frame_buf_ptr = compat_ptr(karg32.reply_frame_buf_ptr);
+	karg.data_in_buf_ptr = compat_ptr(karg32.data_in_buf_ptr);
+	karg.data_out_buf_ptr = compat_ptr(karg32.data_out_buf_ptr);
+	karg.sense_data_ptr = compat_ptr(karg32.sense_data_ptr);
+	return _ctl_do_mpt_command(ioc, karg, &uarg->mf);
+}
+#endif
+
+/**
+ * _ctl_ioctl_main - main ioctl entry point
+ * @file:  (struct file)
+ * @cmd:  ioctl opcode
+ * @arg:  user space data buffer
+ * @compat:  handles 32 bit applications in 64bit os
+ * @mpi_version: will be MPI2_VERSION for mpt2ctl ioctl device &
+ * MPI25_VERSION | MPI26_VERSION for mpt3ctl ioctl device.
+ */
+static long
+_ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg,
+	u8 compat, u16 mpi_version)
+{
+	struct MPT3SAS_ADAPTER *ioc;
+	struct mpt3_ioctl_header ioctl_header;
+	enum block_state state;
+	long ret = -ENOIOCTLCMD;
+
+	/* get IOCTL header */
+	if (copy_from_user(&ioctl_header, (char __user *)arg,
+	    sizeof(struct mpt3_ioctl_header))) {
+		pr_err("failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return -EFAULT;
+	}
+
+	if (_ctl_verify_adapter(ioctl_header.ioc_number,
+				&ioc, mpi_version) == -1 || !ioc)
+		return -ENODEV;
+
+	/* pci_access_mutex lock acquired by ioctl path */
+	mutex_lock(&ioc->pci_access_mutex);
+
+	if (ioc->shost_recovery || ioc->pci_error_recovery ||
+	    ioc->is_driver_loading || ioc->remove_host) {
+		ret = -EAGAIN;
+		goto out_unlock_pciaccess;
+	}
+
+	state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING : BLOCKING;
+	if (state == NON_BLOCKING) {
+		if (!mutex_trylock(&ioc->ctl_cmds.mutex)) {
+			ret = -EAGAIN;
+			goto out_unlock_pciaccess;
+		}
+	} else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) {
+		ret = -ERESTARTSYS;
+		goto out_unlock_pciaccess;
+	}
+
+
+	switch (cmd) {
+	case MPT3IOCINFO:
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_iocinfo))
+			ret = _ctl_getiocinfo(ioc, arg);
+		break;
+#ifdef CONFIG_COMPAT
+	case MPT3COMMAND32:
+#endif
+	case MPT3COMMAND:
+	{
+		struct mpt3_ioctl_command __user *uarg;
+		struct mpt3_ioctl_command karg;
+
+#ifdef CONFIG_COMPAT
+		if (compat) {
+			ret = _ctl_compat_mpt_command(ioc, cmd, arg);
+			break;
+		}
+#endif
+		if (copy_from_user(&karg, arg, sizeof(karg))) {
+			pr_err("failure at %s:%d/%s()!\n",
+			    __FILE__, __LINE__, __func__);
+			ret = -EFAULT;
+			break;
+		}
+
+		if (karg.hdr.ioc_number != ioctl_header.ioc_number) {
+			ret = -EINVAL;
+			break;
+		}
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_command)) {
+			uarg = arg;
+			ret = _ctl_do_mpt_command(ioc, karg, &uarg->mf);
+		}
+		break;
+	}
+	case MPT3EVENTQUERY:
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_eventquery))
+			ret = _ctl_eventquery(ioc, arg);
+		break;
+	case MPT3EVENTENABLE:
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_eventenable))
+			ret = _ctl_eventenable(ioc, arg);
+		break;
+	case MPT3EVENTREPORT:
+		ret = _ctl_eventreport(ioc, arg);
+		break;
+	case MPT3HARDRESET:
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_diag_reset))
+			ret = _ctl_do_reset(ioc, arg);
+		break;
+	case MPT3BTDHMAPPING:
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_btdh_mapping))
+			ret = _ctl_btdh_mapping(ioc, arg);
+		break;
+	case MPT3DIAGREGISTER:
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_register))
+			ret = _ctl_diag_register(ioc, arg);
+		break;
+	case MPT3DIAGUNREGISTER:
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_unregister))
+			ret = _ctl_diag_unregister(ioc, arg);
+		break;
+	case MPT3DIAGQUERY:
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_query))
+			ret = _ctl_diag_query(ioc, arg);
+		break;
+	case MPT3DIAGRELEASE:
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_release))
+			ret = _ctl_diag_release(ioc, arg);
+		break;
+	case MPT3DIAGREADBUFFER:
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_read_buffer))
+			ret = _ctl_diag_read_buffer(ioc, arg);
+		break;
+	case MPT3ADDNLDIAGQUERY:
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_addnl_diag_query))
+			ret = _ctl_addnl_diag_query(ioc, arg);
+		break;
+	default:
+		dctlprintk(ioc,
+			   ioc_info(ioc, "unsupported ioctl opcode(0x%08x)\n",
+				    cmd));
+		break;
+	}
+
+	mutex_unlock(&ioc->ctl_cmds.mutex);
+out_unlock_pciaccess:
+	mutex_unlock(&ioc->pci_access_mutex);
+	return ret;
+}
+
+/**
+ * _ctl_ioctl - mpt3ctl main ioctl entry point (unlocked)
+ * @file: (struct file)
+ * @cmd: ioctl opcode
+ * @arg: ?
+ */
+static long
+_ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	long ret;
+
+	/* pass MPI25_VERSION | MPI26_VERSION value,
+	 * to indicate that this ioctl cmd
+	 * came from mpt3ctl ioctl device.
+	 */
+	ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 0,
+		MPI25_VERSION | MPI26_VERSION);
+	return ret;
+}
+
+/**
+ * _ctl_mpt2_ioctl - mpt2ctl main ioctl entry point (unlocked)
+ * @file: (struct file)
+ * @cmd: ioctl opcode
+ * @arg: ?
+ */
+static long
+_ctl_mpt2_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	long ret;
+
+	/* pass MPI2_VERSION value, to indicate that this ioctl cmd
+	 * came from mpt2ctl ioctl device.
+	 */
+	ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 0, MPI2_VERSION);
+	return ret;
+}
+#ifdef CONFIG_COMPAT
+/**
+ * _ctl_ioctl_compat - main ioctl entry point (compat)
+ * @file: ?
+ * @cmd: ?
+ * @arg: ?
+ *
+ * This routine handles 32 bit applications in 64bit os.
+ */
+static long
+_ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
+{
+	long ret;
+
+	ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 1,
+		MPI25_VERSION | MPI26_VERSION);
+	return ret;
+}
+
+/**
+ * _ctl_mpt2_ioctl_compat - main ioctl entry point (compat)
+ * @file: ?
+ * @cmd: ?
+ * @arg: ?
+ *
+ * This routine handles 32 bit applications in 64bit os.
+ */
+static long
+_ctl_mpt2_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
+{
+	long ret;
+
+	ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 1, MPI2_VERSION);
+	return ret;
+}
+#endif
+
+/* scsi host attributes */
+/**
+ * version_fw_show - firmware version
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+version_fw_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
+	    (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
+	    (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
+	    (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
+	    ioc->facts.FWVersion.Word & 0x000000FF);
+}
+static DEVICE_ATTR_RO(version_fw);
+
+/**
+ * version_bios_show - bios version
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+version_bios_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	u32 version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
+
+	return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
+	    (version & 0xFF000000) >> 24,
+	    (version & 0x00FF0000) >> 16,
+	    (version & 0x0000FF00) >> 8,
+	    version & 0x000000FF);
+}
+static DEVICE_ATTR_RO(version_bios);
+
+/**
+ * version_mpi_show - MPI (message passing interface) version
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+version_mpi_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "%03x.%02x\n",
+	    ioc->facts.MsgVersion, ioc->facts.HeaderVersion >> 8);
+}
+static DEVICE_ATTR_RO(version_mpi);
+
+/**
+ * version_product_show - product name
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+version_product_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, 16, "%s\n", ioc->manu_pg0.ChipName);
+}
+static DEVICE_ATTR_RO(version_product);
+
+/**
+ * version_nvdata_persistent_show - ndvata persistent version
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+version_nvdata_persistent_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "%08xh\n",
+	    le32_to_cpu(ioc->iounit_pg0.NvdataVersionPersistent.Word));
+}
+static DEVICE_ATTR_RO(version_nvdata_persistent);
+
+/**
+ * version_nvdata_default_show - nvdata default version
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+version_nvdata_default_show(struct device *cdev, struct device_attribute
+	*attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "%08xh\n",
+	    le32_to_cpu(ioc->iounit_pg0.NvdataVersionDefault.Word));
+}
+static DEVICE_ATTR_RO(version_nvdata_default);
+
+/**
+ * board_name_show - board name
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+board_name_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardName);
+}
+static DEVICE_ATTR_RO(board_name);
+
+/**
+ * board_assembly_show - board assembly name
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+board_assembly_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardAssembly);
+}
+static DEVICE_ATTR_RO(board_assembly);
+
+/**
+ * board_tracer_show - board tracer number
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+board_tracer_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardTracerNumber);
+}
+static DEVICE_ATTR_RO(board_tracer);
+
+/**
+ * io_delay_show - io missing delay
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * This is for firmware implemention for deboucing device
+ * removal events.
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+io_delay_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay);
+}
+static DEVICE_ATTR_RO(io_delay);
+
+/**
+ * device_delay_show - device missing delay
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * This is for firmware implemention for deboucing device
+ * removal events.
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+device_delay_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay);
+}
+static DEVICE_ATTR_RO(device_delay);
+
+/**
+ * fw_queue_depth_show - global credits
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * This is firmware queue depth limit
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+fw_queue_depth_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->facts.RequestCredit);
+}
+static DEVICE_ATTR_RO(fw_queue_depth);
+
+/**
+ * host_sas_address_show - sas address
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * This is the controller sas address
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+host_sas_address_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
+	    (unsigned long long)ioc->sas_hba.sas_address);
+}
+static DEVICE_ATTR_RO(host_sas_address);
+
+/**
+ * logging_level_show - logging level
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t
+logging_level_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->logging_level);
+}
+static ssize_t
+logging_level_store(struct device *cdev, struct device_attribute *attr,
+	const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	int val = 0;
+
+	if (sscanf(buf, "%x", &val) != 1)
+		return -EINVAL;
+
+	ioc->logging_level = val;
+	ioc_info(ioc, "logging_level=%08xh\n",
+		 ioc->logging_level);
+	return strlen(buf);
+}
+static DEVICE_ATTR_RW(logging_level);
+
+/**
+ * fwfault_debug_show - show/store fwfault_debug
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * mpt3sas_fwfault_debug is command line option
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t
+fwfault_debug_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", ioc->fwfault_debug);
+}
+static ssize_t
+fwfault_debug_store(struct device *cdev, struct device_attribute *attr,
+	const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	int val = 0;
+
+	if (sscanf(buf, "%d", &val) != 1)
+		return -EINVAL;
+
+	ioc->fwfault_debug = val;
+	ioc_info(ioc, "fwfault_debug=%d\n",
+		 ioc->fwfault_debug);
+	return strlen(buf);
+}
+static DEVICE_ATTR_RW(fwfault_debug);
+
+/**
+ * ioc_reset_count_show - ioc reset count
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * This is firmware queue depth limit
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+ioc_reset_count_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", ioc->ioc_reset_count);
+}
+static DEVICE_ATTR_RO(ioc_reset_count);
+
+/**
+ * reply_queue_count_show - number of reply queues
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * This is number of reply queues
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+reply_queue_count_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	u8 reply_queue_count;
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	if ((ioc->facts.IOCCapabilities &
+	    MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable)
+		reply_queue_count = ioc->reply_queue_count;
+	else
+		reply_queue_count = 1;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", reply_queue_count);
+}
+static DEVICE_ATTR_RO(reply_queue_count);
+
+/**
+ * BRM_status_show - Backup Rail Monitor Status
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * This is number of reply queues
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+BRM_status_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	Mpi2IOUnitPage3_t io_unit_pg3;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 backup_rail_monitor_status = 0;
+	u16 ioc_status;
+	int sz;
+	ssize_t rc = 0;
+
+	if (!ioc->is_warpdrive) {
+		ioc_err(ioc, "%s: BRM attribute is only for warpdrive\n",
+			__func__);
+		return 0;
+	}
+	/* pci_access_mutex lock acquired by sysfs show path */
+	mutex_lock(&ioc->pci_access_mutex);
+	if (ioc->pci_error_recovery || ioc->remove_host)
+		goto out;
+
+	sz = sizeof(io_unit_pg3);
+	memset(&io_unit_pg3, 0, sz);
+
+	if (mpt3sas_config_get_iounit_pg3(ioc, &mpi_reply, &io_unit_pg3, sz) !=
+	    0) {
+		ioc_err(ioc, "%s: failed reading iounit_pg3\n",
+			__func__);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		ioc_err(ioc, "%s: iounit_pg3 failed with ioc_status(0x%04x)\n",
+			__func__, ioc_status);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	if (io_unit_pg3.GPIOCount < 25) {
+		ioc_err(ioc, "%s: iounit_pg3.GPIOCount less than 25 entries, detected (%d) entries\n",
+			__func__, io_unit_pg3.GPIOCount);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* BRM status is in bit zero of GPIOVal[24] */
+	backup_rail_monitor_status = le16_to_cpu(io_unit_pg3.GPIOVal[24]);
+	rc = snprintf(buf, PAGE_SIZE, "%d\n", (backup_rail_monitor_status & 1));
+
+ out:
+	mutex_unlock(&ioc->pci_access_mutex);
+	return rc;
+}
+static DEVICE_ATTR_RO(BRM_status);
+
+struct DIAG_BUFFER_START {
+	__le32	Size;
+	__le32	DiagVersion;
+	u8	BufferType;
+	u8	Reserved[3];
+	__le32	Reserved1;
+	__le32	Reserved2;
+	__le32	Reserved3;
+};
+
+/**
+ * host_trace_buffer_size_show - host buffer size (trace only)
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+host_trace_buffer_size_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	u32 size = 0;
+	struct DIAG_BUFFER_START *request_data;
+
+	if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) {
+		ioc_err(ioc, "%s: host_trace_buffer is not registered\n",
+			__func__);
+		return 0;
+	}
+
+	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		ioc_err(ioc, "%s: host_trace_buffer is not registered\n",
+			__func__);
+		return 0;
+	}
+
+	request_data = (struct DIAG_BUFFER_START *)
+	    ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE];
+	if ((le32_to_cpu(request_data->DiagVersion) == 0x00000000 ||
+	    le32_to_cpu(request_data->DiagVersion) == 0x01000000 ||
+	    le32_to_cpu(request_data->DiagVersion) == 0x01010000) &&
+	    le32_to_cpu(request_data->Reserved3) == 0x4742444c)
+		size = le32_to_cpu(request_data->Size);
+
+	ioc->ring_buffer_sz = size;
+	return snprintf(buf, PAGE_SIZE, "%d\n", size);
+}
+static DEVICE_ATTR_RO(host_trace_buffer_size);
+
+/**
+ * host_trace_buffer_show - firmware ring buffer (trace only)
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ *
+ * You will only be able to read 4k bytes of ring buffer at a time.
+ * In order to read beyond 4k bytes, you will have to write out the
+ * offset to the same attribute, it will move the pointer.
+ */
+static ssize_t
+host_trace_buffer_show(struct device *cdev, struct device_attribute *attr,
+	char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	void *request_data;
+	u32 size;
+
+	if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) {
+		ioc_err(ioc, "%s: host_trace_buffer is not registered\n",
+			__func__);
+		return 0;
+	}
+
+	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		ioc_err(ioc, "%s: host_trace_buffer is not registered\n",
+			__func__);
+		return 0;
+	}
+
+	if (ioc->ring_buffer_offset > ioc->ring_buffer_sz)
+		return 0;
+
+	size = ioc->ring_buffer_sz - ioc->ring_buffer_offset;
+	size = (size >= PAGE_SIZE) ? (PAGE_SIZE - 1) : size;
+	request_data = ioc->diag_buffer[0] + ioc->ring_buffer_offset;
+	memcpy(buf, request_data, size);
+	return size;
+}
+
+static ssize_t
+host_trace_buffer_store(struct device *cdev, struct device_attribute *attr,
+	const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	int val = 0;
+
+	if (sscanf(buf, "%d", &val) != 1)
+		return -EINVAL;
+
+	ioc->ring_buffer_offset = val;
+	return strlen(buf);
+}
+static DEVICE_ATTR_RW(host_trace_buffer);
+
+
+/*****************************************/
+
+/**
+ * host_trace_buffer_enable_show - firmware ring buffer (trace only)
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ *
+ * This is a mechnism to post/release host_trace_buffers
+ */
+static ssize_t
+host_trace_buffer_enable_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	if ((!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) ||
+	   ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0))
+		return snprintf(buf, PAGE_SIZE, "off\n");
+	else if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED))
+		return snprintf(buf, PAGE_SIZE, "release\n");
+	else
+		return snprintf(buf, PAGE_SIZE, "post\n");
+}
+
+static ssize_t
+host_trace_buffer_enable_store(struct device *cdev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	char str[10] = "";
+	struct mpt3_diag_register diag_register;
+	u8 issue_reset = 0;
+
+	/* don't allow post/release occurr while recovery is active */
+	if (ioc->shost_recovery || ioc->remove_host ||
+	    ioc->pci_error_recovery || ioc->is_driver_loading)
+		return -EBUSY;
+
+	if (sscanf(buf, "%9s", str) != 1)
+		return -EINVAL;
+
+	if (!strcmp(str, "post")) {
+		/* exit out if host buffers are already posted */
+		if ((ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) &&
+		    (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+		    MPT3_DIAG_BUFFER_IS_REGISTERED) &&
+		    ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+		    MPT3_DIAG_BUFFER_IS_RELEASED) == 0))
+			goto out;
+		memset(&diag_register, 0, sizeof(struct mpt3_diag_register));
+		ioc_info(ioc, "posting host trace buffers\n");
+		diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_TRACE;
+
+		if (ioc->manu_pg11.HostTraceBufferMaxSizeKB != 0 &&
+		    ioc->diag_buffer_sz[MPI2_DIAG_BUF_TYPE_TRACE] != 0) {
+			/* post the same buffer allocated previously */
+			diag_register.requested_buffer_size =
+			    ioc->diag_buffer_sz[MPI2_DIAG_BUF_TYPE_TRACE];
+		} else {
+			/*
+			 * Free the diag buffer memory which was previously
+			 * allocated by an application.
+			 */
+			if ((ioc->diag_buffer_sz[MPI2_DIAG_BUF_TYPE_TRACE] != 0)
+			    &&
+			    (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+			    MPT3_DIAG_BUFFER_IS_APP_OWNED)) {
+				dma_free_coherent(&ioc->pdev->dev,
+						  ioc->diag_buffer_sz[MPI2_DIAG_BUF_TYPE_TRACE],
+						  ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE],
+						  ioc->diag_buffer_dma[MPI2_DIAG_BUF_TYPE_TRACE]);
+				ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE] =
+				    NULL;
+			}
+
+			diag_register.requested_buffer_size = (1024 * 1024);
+		}
+
+		diag_register.unique_id =
+		    (ioc->hba_mpi_version_belonged == MPI2_VERSION) ?
+		    (MPT2DIAGBUFFUNIQUEID):(MPT3DIAGBUFFUNIQUEID);
+		ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] = 0;
+		_ctl_diag_register_2(ioc,  &diag_register);
+		if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+		    MPT3_DIAG_BUFFER_IS_REGISTERED) {
+			ioc_info(ioc,
+			    "Trace buffer %d KB allocated through sysfs\n",
+			    diag_register.requested_buffer_size>>10);
+			if (ioc->hba_mpi_version_belonged != MPI2_VERSION)
+				ioc->diag_buffer_status[
+				    MPI2_DIAG_BUF_TYPE_TRACE] |=
+				    MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED;
+		}
+	} else if (!strcmp(str, "release")) {
+		/* exit out if host buffers are already released */
+		if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE])
+			goto out;
+		if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+		    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0)
+			goto out;
+		if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+		    MPT3_DIAG_BUFFER_IS_RELEASED))
+			goto out;
+		ioc_info(ioc, "releasing host trace buffer\n");
+		ioc->htb_rel.buffer_rel_condition = MPT3_DIAG_BUFFER_REL_SYSFS;
+		mpt3sas_send_diag_release(ioc, MPI2_DIAG_BUF_TYPE_TRACE,
+		    &issue_reset);
+	}
+
+ out:
+	return strlen(buf);
+}
+static DEVICE_ATTR_RW(host_trace_buffer_enable);
+
+/*********** diagnostic trigger suppport *********************************/
+
+/**
+ * diag_trigger_master_show - show the diag_trigger_master attribute
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t
+diag_trigger_master_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	unsigned long flags;
+	ssize_t rc;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+	rc = sizeof(struct SL_WH_MASTER_TRIGGER_T);
+	memcpy(buf, &ioc->diag_trigger_master, rc);
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+	return rc;
+}
+
+/**
+ * diag_trigger_master_store - store the diag_trigger_master attribute
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ * @count: ?
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t
+diag_trigger_master_store(struct device *cdev,
+	struct device_attribute *attr, const char *buf, size_t count)
+
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct SL_WH_MASTER_TRIGGER_T *master_tg;
+	unsigned long flags;
+	ssize_t rc;
+	bool set = 1;
+
+	rc = min(sizeof(struct SL_WH_MASTER_TRIGGER_T), count);
+
+	if (ioc->supports_trigger_pages) {
+		master_tg = kzalloc(sizeof(struct SL_WH_MASTER_TRIGGER_T),
+		    GFP_KERNEL);
+		if (!master_tg)
+			return -ENOMEM;
+
+		memcpy(master_tg, buf, rc);
+		if (!master_tg->MasterData)
+			set = 0;
+		if (mpt3sas_config_update_driver_trigger_pg1(ioc, master_tg,
+		    set)) {
+			kfree(master_tg);
+			return -EFAULT;
+		}
+		kfree(master_tg);
+	}
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+	memset(&ioc->diag_trigger_master, 0,
+	    sizeof(struct SL_WH_MASTER_TRIGGER_T));
+	memcpy(&ioc->diag_trigger_master, buf, rc);
+	ioc->diag_trigger_master.MasterData |=
+	    (MASTER_TRIGGER_FW_FAULT + MASTER_TRIGGER_ADAPTER_RESET);
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+	return rc;
+}
+static DEVICE_ATTR_RW(diag_trigger_master);
+
+
+/**
+ * diag_trigger_event_show - show the diag_trigger_event attribute
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t
+diag_trigger_event_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	unsigned long flags;
+	ssize_t rc;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+	rc = sizeof(struct SL_WH_EVENT_TRIGGERS_T);
+	memcpy(buf, &ioc->diag_trigger_event, rc);
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+	return rc;
+}
+
+/**
+ * diag_trigger_event_store - store the diag_trigger_event attribute
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ * @count: ?
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t
+diag_trigger_event_store(struct device *cdev,
+	struct device_attribute *attr, const char *buf, size_t count)
+
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct SL_WH_EVENT_TRIGGERS_T *event_tg;
+	unsigned long flags;
+	ssize_t sz;
+	bool set = 1;
+
+	sz = min(sizeof(struct SL_WH_EVENT_TRIGGERS_T), count);
+	if (ioc->supports_trigger_pages) {
+		event_tg = kzalloc(sizeof(struct SL_WH_EVENT_TRIGGERS_T),
+		    GFP_KERNEL);
+		if (!event_tg)
+			return -ENOMEM;
+
+		memcpy(event_tg, buf, sz);
+		if (!event_tg->ValidEntries)
+			set = 0;
+		if (mpt3sas_config_update_driver_trigger_pg2(ioc, event_tg,
+		    set)) {
+			kfree(event_tg);
+			return -EFAULT;
+		}
+		kfree(event_tg);
+	}
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+
+	memset(&ioc->diag_trigger_event, 0,
+	    sizeof(struct SL_WH_EVENT_TRIGGERS_T));
+	memcpy(&ioc->diag_trigger_event, buf, sz);
+	if (ioc->diag_trigger_event.ValidEntries > NUM_VALID_ENTRIES)
+		ioc->diag_trigger_event.ValidEntries = NUM_VALID_ENTRIES;
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+	return sz;
+}
+static DEVICE_ATTR_RW(diag_trigger_event);
+
+
+/**
+ * diag_trigger_scsi_show - show the diag_trigger_scsi attribute
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t
+diag_trigger_scsi_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	unsigned long flags;
+	ssize_t rc;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+	rc = sizeof(struct SL_WH_SCSI_TRIGGERS_T);
+	memcpy(buf, &ioc->diag_trigger_scsi, rc);
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+	return rc;
+}
+
+/**
+ * diag_trigger_scsi_store - store the diag_trigger_scsi attribute
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ * @count: ?
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t
+diag_trigger_scsi_store(struct device *cdev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct SL_WH_SCSI_TRIGGERS_T *scsi_tg;
+	unsigned long flags;
+	ssize_t sz;
+	bool set = 1;
+
+	sz = min(sizeof(struct SL_WH_SCSI_TRIGGERS_T), count);
+	if (ioc->supports_trigger_pages) {
+		scsi_tg = kzalloc(sizeof(struct SL_WH_SCSI_TRIGGERS_T),
+		    GFP_KERNEL);
+		if (!scsi_tg)
+			return -ENOMEM;
+
+		memcpy(scsi_tg, buf, sz);
+		if (!scsi_tg->ValidEntries)
+			set = 0;
+		if (mpt3sas_config_update_driver_trigger_pg3(ioc, scsi_tg,
+		    set)) {
+			kfree(scsi_tg);
+			return -EFAULT;
+		}
+		kfree(scsi_tg);
+	}
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+
+	memset(&ioc->diag_trigger_scsi, 0, sizeof(ioc->diag_trigger_scsi));
+	memcpy(&ioc->diag_trigger_scsi, buf, sz);
+	if (ioc->diag_trigger_scsi.ValidEntries > NUM_VALID_ENTRIES)
+		ioc->diag_trigger_scsi.ValidEntries = NUM_VALID_ENTRIES;
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+	return sz;
+}
+static DEVICE_ATTR_RW(diag_trigger_scsi);
+
+
+/**
+ * diag_trigger_mpi_show - show the diag_trigger_mpi attribute
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t
+diag_trigger_mpi_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	unsigned long flags;
+	ssize_t rc;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+	rc = sizeof(struct SL_WH_MPI_TRIGGERS_T);
+	memcpy(buf, &ioc->diag_trigger_mpi, rc);
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+	return rc;
+}
+
+/**
+ * diag_trigger_mpi_store - store the diag_trigger_mpi attribute
+ * @cdev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ * @count: ?
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t
+diag_trigger_mpi_store(struct device *cdev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct SL_WH_MPI_TRIGGERS_T *mpi_tg;
+	unsigned long flags;
+	ssize_t sz;
+	bool set = 1;
+
+	sz = min(sizeof(struct SL_WH_MPI_TRIGGERS_T), count);
+	if (ioc->supports_trigger_pages) {
+		mpi_tg = kzalloc(sizeof(struct SL_WH_MPI_TRIGGERS_T),
+		    GFP_KERNEL);
+		if (!mpi_tg)
+			return -ENOMEM;
+
+		memcpy(mpi_tg, buf, sz);
+		if (!mpi_tg->ValidEntries)
+			set = 0;
+		if (mpt3sas_config_update_driver_trigger_pg4(ioc, mpi_tg,
+		    set)) {
+			kfree(mpi_tg);
+			return -EFAULT;
+		}
+		kfree(mpi_tg);
+	}
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+	memset(&ioc->diag_trigger_mpi, 0,
+	    sizeof(ioc->diag_trigger_mpi));
+	memcpy(&ioc->diag_trigger_mpi, buf, sz);
+	if (ioc->diag_trigger_mpi.ValidEntries > NUM_VALID_ENTRIES)
+		ioc->diag_trigger_mpi.ValidEntries = NUM_VALID_ENTRIES;
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+	return sz;
+}
+
+static DEVICE_ATTR_RW(diag_trigger_mpi);
+
+/*********** diagnostic trigger suppport *** END ****************************/
+
+/*****************************************/
+
+/**
+ * drv_support_bitmap_show - driver supported feature bitmap
+ * @cdev: pointer to embedded class device
+ * @attr: unused
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+drv_support_bitmap_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "0x%08x\n", ioc->drv_support_bitmap);
+}
+static DEVICE_ATTR_RO(drv_support_bitmap);
+
+/**
+ * enable_sdev_max_qd_show - display whether sdev max qd is enabled/disabled
+ * @cdev: pointer to embedded class device
+ * @attr: unused
+ * @buf: the buffer returned
+ *
+ * A sysfs read/write shost attribute. This attribute is used to set the
+ * targets queue depth to HBA IO queue depth if this attribute is enabled.
+ */
+static ssize_t
+enable_sdev_max_qd_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", ioc->enable_sdev_max_qd);
+}
+
+/**
+ * enable_sdev_max_qd_store - Enable/disable sdev max qd
+ * @cdev: pointer to embedded class device
+ * @attr: unused
+ * @buf: the buffer returned
+ * @count: unused
+ *
+ * A sysfs read/write shost attribute. This attribute is used to set the
+ * targets queue depth to HBA IO queue depth if this attribute is enabled.
+ * If this attribute is disabled then targets will have corresponding default
+ * queue depth.
+ */
+static ssize_t
+enable_sdev_max_qd_store(struct device *cdev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	int val = 0;
+	struct scsi_device *sdev;
+	struct _raid_device *raid_device;
+	int qdepth;
+
+	if (kstrtoint(buf, 0, &val) != 0)
+		return -EINVAL;
+
+	switch (val) {
+	case 0:
+		ioc->enable_sdev_max_qd = 0;
+		shost_for_each_device(sdev, ioc->shost) {
+			sas_device_priv_data = sdev->hostdata;
+			if (!sas_device_priv_data)
+				continue;
+			sas_target_priv_data = sas_device_priv_data->sas_target;
+			if (!sas_target_priv_data)
+				continue;
+
+			if (sas_target_priv_data->flags &
+			    MPT_TARGET_FLAGS_VOLUME) {
+				raid_device =
+				    mpt3sas_raid_device_find_by_handle(ioc,
+				    sas_target_priv_data->handle);
+
+				switch (raid_device->volume_type) {
+				case MPI2_RAID_VOL_TYPE_RAID0:
+					if (raid_device->device_info &
+					    MPI2_SAS_DEVICE_INFO_SSP_TARGET)
+						qdepth =
+						    MPT3SAS_SAS_QUEUE_DEPTH;
+					else
+						qdepth =
+						    MPT3SAS_SATA_QUEUE_DEPTH;
+					break;
+				case MPI2_RAID_VOL_TYPE_RAID1E:
+				case MPI2_RAID_VOL_TYPE_RAID1:
+				case MPI2_RAID_VOL_TYPE_RAID10:
+				case MPI2_RAID_VOL_TYPE_UNKNOWN:
+				default:
+					qdepth = MPT3SAS_RAID_QUEUE_DEPTH;
+				}
+			} else if (sas_target_priv_data->flags &
+			    MPT_TARGET_FLAGS_PCIE_DEVICE)
+				qdepth = ioc->max_nvme_qd;
+			else
+				qdepth = (sas_target_priv_data->sas_dev->port_type > 1) ?
+				    ioc->max_wideport_qd : ioc->max_narrowport_qd;
+
+			mpt3sas_scsih_change_queue_depth(sdev, qdepth);
+		}
+		break;
+	case 1:
+		ioc->enable_sdev_max_qd = 1;
+		shost_for_each_device(sdev, ioc->shost)
+			mpt3sas_scsih_change_queue_depth(sdev,
+			    shost->can_queue);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return strlen(buf);
+}
+static DEVICE_ATTR_RW(enable_sdev_max_qd);
+
+static struct attribute *mpt3sas_host_attrs[] = {
+	&dev_attr_version_fw.attr,
+	&dev_attr_version_bios.attr,
+	&dev_attr_version_mpi.attr,
+	&dev_attr_version_product.attr,
+	&dev_attr_version_nvdata_persistent.attr,
+	&dev_attr_version_nvdata_default.attr,
+	&dev_attr_board_name.attr,
+	&dev_attr_board_assembly.attr,
+	&dev_attr_board_tracer.attr,
+	&dev_attr_io_delay.attr,
+	&dev_attr_device_delay.attr,
+	&dev_attr_logging_level.attr,
+	&dev_attr_fwfault_debug.attr,
+	&dev_attr_fw_queue_depth.attr,
+	&dev_attr_host_sas_address.attr,
+	&dev_attr_ioc_reset_count.attr,
+	&dev_attr_host_trace_buffer_size.attr,
+	&dev_attr_host_trace_buffer.attr,
+	&dev_attr_host_trace_buffer_enable.attr,
+	&dev_attr_reply_queue_count.attr,
+	&dev_attr_diag_trigger_master.attr,
+	&dev_attr_diag_trigger_event.attr,
+	&dev_attr_diag_trigger_scsi.attr,
+	&dev_attr_diag_trigger_mpi.attr,
+	&dev_attr_drv_support_bitmap.attr,
+	&dev_attr_BRM_status.attr,
+	&dev_attr_enable_sdev_max_qd.attr,
+	NULL,
+};
+
+static const struct attribute_group mpt3sas_host_attr_group = {
+	.attrs = mpt3sas_host_attrs
+};
+
+const struct attribute_group *mpt3sas_host_groups[] = {
+	&mpt3sas_host_attr_group,
+	NULL
+};
+
+/* device attributes */
+
+/**
+ * sas_address_show - sas address
+ * @dev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * This is the sas address for the target
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+sas_address_show(struct device *dev, struct device_attribute *attr,
+	char *buf)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
+
+	return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
+	    (unsigned long long)sas_device_priv_data->sas_target->sas_address);
+}
+static DEVICE_ATTR_RO(sas_address);
+
+/**
+ * sas_device_handle_show - device handle
+ * @dev: pointer to embedded class device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * This is the firmware assigned device handle
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+sas_device_handle_show(struct device *dev, struct device_attribute *attr,
+	char *buf)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
+
+	return snprintf(buf, PAGE_SIZE, "0x%04x\n",
+	    sas_device_priv_data->sas_target->handle);
+}
+static DEVICE_ATTR_RO(sas_device_handle);
+
+/**
+ * sas_ncq_prio_supported_show - Indicate if device supports NCQ priority
+ * @dev: pointer to embedded device
+ * @attr: sas_ncq_prio_supported attribute descriptor
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' sdev attribute, only works with SATA
+ */
+static ssize_t
+sas_ncq_prio_supported_show(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+
+	return sysfs_emit(buf, "%d\n", scsih_ncq_prio_supp(sdev));
+}
+static DEVICE_ATTR_RO(sas_ncq_prio_supported);
+
+/**
+ * sas_ncq_prio_enable_show - send prioritized io commands to device
+ * @dev: pointer to embedded device
+ * @attr: ?
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read/write' sdev attribute, only works with SATA
+ */
+static ssize_t
+sas_ncq_prio_enable_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+			sas_device_priv_data->ncq_prio_enable);
+}
+
+static ssize_t
+sas_ncq_prio_enable_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
+	bool ncq_prio_enable = 0;
+
+	if (kstrtobool(buf, &ncq_prio_enable))
+		return -EINVAL;
+
+	if (!scsih_ncq_prio_supp(sdev))
+		return -EINVAL;
+
+	sas_device_priv_data->ncq_prio_enable = ncq_prio_enable;
+	return strlen(buf);
+}
+static DEVICE_ATTR_RW(sas_ncq_prio_enable);
+
+static struct attribute *mpt3sas_dev_attrs[] = {
+	&dev_attr_sas_address.attr,
+	&dev_attr_sas_device_handle.attr,
+	&dev_attr_sas_ncq_prio_supported.attr,
+	&dev_attr_sas_ncq_prio_enable.attr,
+	NULL,
+};
+
+static const struct attribute_group mpt3sas_dev_attr_group = {
+	.attrs = mpt3sas_dev_attrs
+};
+
+const struct attribute_group *mpt3sas_dev_groups[] = {
+	&mpt3sas_dev_attr_group,
+	NULL
+};
+
+/* file operations table for mpt3ctl device */
+static const struct file_operations ctl_fops = {
+	.owner = THIS_MODULE,
+	.unlocked_ioctl = _ctl_ioctl,
+	.poll = _ctl_poll,
+	.fasync = _ctl_fasync,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = _ctl_ioctl_compat,
+#endif
+};
+
+/* file operations table for mpt2ctl device */
+static const struct file_operations ctl_gen2_fops = {
+	.owner = THIS_MODULE,
+	.unlocked_ioctl = _ctl_mpt2_ioctl,
+	.poll = _ctl_poll,
+	.fasync = _ctl_fasync,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = _ctl_mpt2_ioctl_compat,
+#endif
+};
+
+static struct miscdevice ctl_dev = {
+	.minor  = MPT3SAS_MINOR,
+	.name   = MPT3SAS_DEV_NAME,
+	.fops   = &ctl_fops,
+};
+
+static struct miscdevice gen2_ctl_dev = {
+	.minor  = MPT2SAS_MINOR,
+	.name   = MPT2SAS_DEV_NAME,
+	.fops   = &ctl_gen2_fops,
+};
+
+/**
+ * mpt3sas_ctl_init - main entry point for ctl.
+ * @hbas_to_enumerate: ?
+ */
+void
+mpt3sas_ctl_init(ushort hbas_to_enumerate)
+{
+	async_queue = NULL;
+
+	/* Don't register mpt3ctl ioctl device if
+	 * hbas_to_enumarate is one.
+	 */
+	if (hbas_to_enumerate != 1)
+		if (misc_register(&ctl_dev) < 0)
+			pr_err("%s can't register misc device [minor=%d]\n",
+			    MPT3SAS_DRIVER_NAME, MPT3SAS_MINOR);
+
+	/* Don't register mpt3ctl ioctl device if
+	 * hbas_to_enumarate is two.
+	 */
+	if (hbas_to_enumerate != 2)
+		if (misc_register(&gen2_ctl_dev) < 0)
+			pr_err("%s can't register misc device [minor=%d]\n",
+			    MPT2SAS_DRIVER_NAME, MPT2SAS_MINOR);
+
+	init_waitqueue_head(&ctl_poll_wait);
+}
+
+/**
+ * mpt3sas_ctl_exit - exit point for ctl
+ * @hbas_to_enumerate: ?
+ */
+void
+mpt3sas_ctl_exit(ushort hbas_to_enumerate)
+{
+	struct MPT3SAS_ADAPTER *ioc;
+	int i;
+
+	list_for_each_entry(ioc, &mpt3sas_ioc_list, list) {
+
+		/* free memory associated to diag buffers */
+		for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
+			if (!ioc->diag_buffer[i])
+				continue;
+			dma_free_coherent(&ioc->pdev->dev,
+					  ioc->diag_buffer_sz[i],
+					  ioc->diag_buffer[i],
+					  ioc->diag_buffer_dma[i]);
+			ioc->diag_buffer[i] = NULL;
+			ioc->diag_buffer_status[i] = 0;
+		}
+
+		kfree(ioc->event_log);
+	}
+	if (hbas_to_enumerate != 1)
+		misc_deregister(&ctl_dev);
+	if (hbas_to_enumerate != 2)
+		misc_deregister(&gen2_ctl_dev);
+}
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.h b/drivers/scsi/mpt3sas/mpt3sas_ctl.h
new file mode 100644
index 0000000000..8f6ffb4026
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.h
@@ -0,0 +1,451 @@
+/*
+ * Management Module Support for MPT (Message Passing Technology) based
+ * controllers
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.h
+ * Copyright (C) 2012-2014  LSI Corporation
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#ifndef MPT3SAS_CTL_H_INCLUDED
+#define MPT3SAS_CTL_H_INCLUDED
+
+#ifdef __KERNEL__
+#include <linux/miscdevice.h>
+#endif
+
+#include "mpt3sas_base.h"
+
+#ifndef MPT2SAS_MINOR
+#define MPT2SAS_MINOR		(MPT_MINOR + 1)
+#endif
+#ifndef MPT3SAS_MINOR
+#define MPT3SAS_MINOR		(MPT_MINOR + 2)
+#endif
+#define MPT2SAS_DEV_NAME	"mpt2ctl"
+#define MPT3SAS_DEV_NAME	"mpt3ctl"
+#define MPT3_MAGIC_NUMBER	'L'
+#define MPT3_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */
+
+/**
+ * IOCTL opcodes
+ */
+#define MPT3IOCINFO	_IOWR(MPT3_MAGIC_NUMBER, 17, \
+	struct mpt3_ioctl_iocinfo)
+#define MPT3COMMAND	_IOWR(MPT3_MAGIC_NUMBER, 20, \
+	struct mpt3_ioctl_command)
+#ifdef CONFIG_COMPAT
+#define MPT3COMMAND32	_IOWR(MPT3_MAGIC_NUMBER, 20, \
+	struct mpt3_ioctl_command32)
+#endif
+#define MPT3EVENTQUERY	_IOWR(MPT3_MAGIC_NUMBER, 21, \
+	struct mpt3_ioctl_eventquery)
+#define MPT3EVENTENABLE	_IOWR(MPT3_MAGIC_NUMBER, 22, \
+	struct mpt3_ioctl_eventenable)
+#define MPT3EVENTREPORT	_IOWR(MPT3_MAGIC_NUMBER, 23, \
+	struct mpt3_ioctl_eventreport)
+#define MPT3HARDRESET	_IOWR(MPT3_MAGIC_NUMBER, 24, \
+	struct mpt3_ioctl_diag_reset)
+#define MPT3BTDHMAPPING	_IOWR(MPT3_MAGIC_NUMBER, 31, \
+	struct mpt3_ioctl_btdh_mapping)
+
+/* diag buffer support */
+#define MPT3DIAGREGISTER _IOWR(MPT3_MAGIC_NUMBER, 26, \
+	struct mpt3_diag_register)
+#define MPT3DIAGRELEASE	_IOWR(MPT3_MAGIC_NUMBER, 27, \
+	struct mpt3_diag_release)
+#define MPT3DIAGUNREGISTER _IOWR(MPT3_MAGIC_NUMBER, 28, \
+	struct mpt3_diag_unregister)
+#define MPT3DIAGQUERY	_IOWR(MPT3_MAGIC_NUMBER, 29, \
+	struct mpt3_diag_query)
+#define MPT3DIAGREADBUFFER _IOWR(MPT3_MAGIC_NUMBER, 30, \
+	struct mpt3_diag_read_buffer)
+#define MPT3ADDNLDIAGQUERY _IOWR(MPT3_MAGIC_NUMBER, 32, \
+	struct mpt3_addnl_diag_query)
+
+/* Trace Buffer default UniqueId */
+#define MPT2DIAGBUFFUNIQUEID (0x07075900)
+#define MPT3DIAGBUFFUNIQUEID (0x4252434D)
+
+/* UID not found */
+#define MPT3_DIAG_UID_NOT_FOUND (0xFF)
+
+
+/**
+ * struct mpt3_ioctl_header - main header structure
+ * @ioc_number -  IOC unit number
+ * @port_number - IOC port number
+ * @max_data_size - maximum number bytes to transfer on read
+ */
+struct mpt3_ioctl_header {
+	uint32_t ioc_number;
+	uint32_t port_number;
+	uint32_t max_data_size;
+};
+
+/**
+ * struct mpt3_ioctl_diag_reset - diagnostic reset
+ * @hdr - generic header
+ */
+struct mpt3_ioctl_diag_reset {
+	struct mpt3_ioctl_header hdr;
+};
+
+
+/**
+ * struct mpt3_ioctl_pci_info - pci device info
+ * @device - pci device id
+ * @function - pci function id
+ * @bus - pci bus id
+ * @segment_id - pci segment id
+ */
+struct mpt3_ioctl_pci_info {
+	union {
+		struct {
+			uint32_t device:5;
+			uint32_t function:3;
+			uint32_t bus:24;
+		} bits;
+		uint32_t  word;
+	} u;
+	uint32_t segment_id;
+};
+
+
+#define MPT2_IOCTL_INTERFACE_SCSI	(0x00)
+#define MPT2_IOCTL_INTERFACE_FC		(0x01)
+#define MPT2_IOCTL_INTERFACE_FC_IP	(0x02)
+#define MPT2_IOCTL_INTERFACE_SAS	(0x03)
+#define MPT2_IOCTL_INTERFACE_SAS2	(0x04)
+#define MPT2_IOCTL_INTERFACE_SAS2_SSS6200	(0x05)
+#define MPT3_IOCTL_INTERFACE_SAS3	(0x06)
+#define MPT3_IOCTL_INTERFACE_SAS35	(0x07)
+#define MPT2_IOCTL_VERSION_LENGTH	(32)
+
+/**
+ * struct mpt3_ioctl_iocinfo - generic controller info
+ * @hdr - generic header
+ * @adapter_type - type of adapter (spi, fc, sas)
+ * @port_number - port number
+ * @pci_id - PCI Id
+ * @hw_rev - hardware revision
+ * @sub_system_device - PCI subsystem Device ID
+ * @sub_system_vendor - PCI subsystem Vendor ID
+ * @rsvd0 - reserved
+ * @firmware_version - firmware version
+ * @bios_version - BIOS version
+ * @driver_version - driver version - 32 ASCII characters
+ * @rsvd1 - reserved
+ * @scsi_id - scsi id of adapter 0
+ * @rsvd2 - reserved
+ * @pci_information - pci info (2nd revision)
+ */
+struct mpt3_ioctl_iocinfo {
+	struct mpt3_ioctl_header hdr;
+	uint32_t adapter_type;
+	uint32_t port_number;
+	uint32_t pci_id;
+	uint32_t hw_rev;
+	uint32_t subsystem_device;
+	uint32_t subsystem_vendor;
+	uint32_t rsvd0;
+	uint32_t firmware_version;
+	uint32_t bios_version;
+	uint8_t driver_version[MPT2_IOCTL_VERSION_LENGTH];
+	uint8_t rsvd1;
+	uint8_t scsi_id;
+	uint16_t rsvd2;
+	struct mpt3_ioctl_pci_info pci_information;
+};
+
+
+/* number of event log entries */
+#define MPT3SAS_CTL_EVENT_LOG_SIZE (200)
+
+/**
+ * struct mpt3_ioctl_eventquery - query event count and type
+ * @hdr - generic header
+ * @event_entries - number of events returned by get_event_report
+ * @rsvd - reserved
+ * @event_types - type of events currently being captured
+ */
+struct mpt3_ioctl_eventquery {
+	struct mpt3_ioctl_header hdr;
+	uint16_t event_entries;
+	uint16_t rsvd;
+	uint32_t event_types[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
+};
+
+/**
+ * struct mpt3_ioctl_eventenable - enable/disable event capturing
+ * @hdr - generic header
+ * @event_types - toggle off/on type of events to be captured
+ */
+struct mpt3_ioctl_eventenable {
+	struct mpt3_ioctl_header hdr;
+	uint32_t event_types[4];
+};
+
+#define MPT3_EVENT_DATA_SIZE (192)
+/**
+ * struct MPT3_IOCTL_EVENTS -
+ * @event - the event that was reported
+ * @context - unique value for each event assigned by driver
+ * @data - event data returned in fw reply message
+ */
+struct MPT3_IOCTL_EVENTS {
+	uint32_t event;
+	uint32_t context;
+	uint8_t data[MPT3_EVENT_DATA_SIZE];
+};
+
+/**
+ * struct mpt3_ioctl_eventreport - returing event log
+ * @hdr - generic header
+ * @event_data - (see struct MPT3_IOCTL_EVENTS)
+ */
+struct mpt3_ioctl_eventreport {
+	struct mpt3_ioctl_header hdr;
+	struct MPT3_IOCTL_EVENTS event_data[1];
+};
+
+/**
+ * struct mpt3_ioctl_command - generic mpt firmware passthru ioctl
+ * @hdr - generic header
+ * @timeout - command timeout in seconds. (if zero then use driver default
+ *  value).
+ * @reply_frame_buf_ptr - reply location
+ * @data_in_buf_ptr - destination for read
+ * @data_out_buf_ptr - data source for write
+ * @sense_data_ptr - sense data location
+ * @max_reply_bytes - maximum number of reply bytes to be sent to app.
+ * @data_in_size - number bytes for data transfer in (read)
+ * @data_out_size - number bytes for data transfer out (write)
+ * @max_sense_bytes - maximum number of bytes for auto sense buffers
+ * @data_sge_offset - offset in words from the start of the request message to
+ * the first SGL
+ * @mf[1];
+ */
+struct mpt3_ioctl_command {
+	struct mpt3_ioctl_header hdr;
+	uint32_t timeout;
+	void __user *reply_frame_buf_ptr;
+	void __user *data_in_buf_ptr;
+	void __user *data_out_buf_ptr;
+	void __user *sense_data_ptr;
+	uint32_t max_reply_bytes;
+	uint32_t data_in_size;
+	uint32_t data_out_size;
+	uint32_t max_sense_bytes;
+	uint32_t data_sge_offset;
+	uint8_t mf[1];
+};
+
+#ifdef CONFIG_COMPAT
+struct mpt3_ioctl_command32 {
+	struct mpt3_ioctl_header hdr;
+	uint32_t timeout;
+	uint32_t reply_frame_buf_ptr;
+	uint32_t data_in_buf_ptr;
+	uint32_t data_out_buf_ptr;
+	uint32_t sense_data_ptr;
+	uint32_t max_reply_bytes;
+	uint32_t data_in_size;
+	uint32_t data_out_size;
+	uint32_t max_sense_bytes;
+	uint32_t data_sge_offset;
+	uint8_t mf[1];
+};
+#endif
+
+/**
+ * struct mpt3_ioctl_btdh_mapping - mapping info
+ * @hdr - generic header
+ * @id - target device identification number
+ * @bus - SCSI bus number that the target device exists on
+ * @handle - device handle for the target device
+ * @rsvd - reserved
+ *
+ * To obtain a bus/id the application sets
+ * handle to valid handle, and bus/id to 0xFFFF.
+ *
+ * To obtain the device handle the application sets
+ * bus/id valid value, and the handle to 0xFFFF.
+ */
+struct mpt3_ioctl_btdh_mapping {
+	struct mpt3_ioctl_header hdr;
+	uint32_t id;
+	uint32_t bus;
+	uint16_t handle;
+	uint16_t rsvd;
+};
+
+
+
+/* application flags for mpt3_diag_register, mpt3_diag_query */
+#define MPT3_APP_FLAGS_APP_OWNED	(0x0001)
+#define MPT3_APP_FLAGS_BUFFER_VALID	(0x0002)
+#define MPT3_APP_FLAGS_FW_BUFFER_ACCESS	(0x0004)
+#define MPT3_APP_FLAGS_DYNAMIC_BUFFER_ALLOC (0x0008)
+
+/* flags for mpt3_diag_read_buffer */
+#define MPT3_FLAGS_REREGISTER		(0x0001)
+
+#define MPT3_PRODUCT_SPECIFIC_DWORDS		23
+
+/**
+ * struct mpt3_diag_register - application register with driver
+ * @hdr - generic header
+ * @reserved -
+ * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
+ * @application_flags - misc flags
+ * @diagnostic_flags - specifies flags affecting command processing
+ * @product_specific - product specific information
+ * @requested_buffer_size - buffers size in bytes
+ * @unique_id - tag specified by application that is used to signal ownership
+ *  of the buffer.
+ *
+ * This will allow the driver to setup any required buffers that will be
+ * needed by firmware to communicate with the driver.
+ */
+struct mpt3_diag_register {
+	struct mpt3_ioctl_header hdr;
+	uint8_t reserved;
+	uint8_t buffer_type;
+	uint16_t application_flags;
+	uint32_t diagnostic_flags;
+	uint32_t product_specific[MPT3_PRODUCT_SPECIFIC_DWORDS];
+	uint32_t requested_buffer_size;
+	uint32_t unique_id;
+};
+
+/**
+ * struct mpt3_diag_unregister - application unregister with driver
+ * @hdr - generic header
+ * @unique_id - tag uniquely identifies the buffer to be unregistered
+ *
+ * This will allow the driver to cleanup any memory allocated for diag
+ * messages and to free up any resources.
+ */
+struct mpt3_diag_unregister {
+	struct mpt3_ioctl_header hdr;
+	uint32_t unique_id;
+};
+
+/**
+ * struct mpt3_diag_query - query relevant info associated with diag buffers
+ * @hdr - generic header
+ * @reserved -
+ * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
+ * @application_flags - misc flags
+ * @diagnostic_flags - specifies flags affecting command processing
+ * @product_specific - product specific information
+ * @total_buffer_size - diag buffer size in bytes
+ * @driver_added_buffer_size - size of extra space appended to end of buffer
+ * @unique_id - unique id associated with this buffer.
+ *
+ * The application will send only buffer_type and unique_id.  Driver will
+ * inspect unique_id first, if valid, fill in all the info.  If unique_id is
+ * 0x00, the driver will return info specified by Buffer Type.
+ */
+struct mpt3_diag_query {
+	struct mpt3_ioctl_header hdr;
+	uint8_t reserved;
+	uint8_t buffer_type;
+	uint16_t application_flags;
+	uint32_t diagnostic_flags;
+	uint32_t product_specific[MPT3_PRODUCT_SPECIFIC_DWORDS];
+	uint32_t total_buffer_size;
+	uint32_t driver_added_buffer_size;
+	uint32_t unique_id;
+};
+
+/**
+ * struct mpt3_diag_release -  request to send Diag Release Message to firmware
+ * @hdr - generic header
+ * @unique_id - tag uniquely identifies the buffer to be released
+ *
+ * This allows ownership of the specified buffer to returned to the driver,
+ * allowing an application to read the buffer without fear that firmware is
+ * overwriting information in the buffer.
+ */
+struct mpt3_diag_release {
+	struct mpt3_ioctl_header hdr;
+	uint32_t unique_id;
+};
+
+/**
+ * struct mpt3_diag_read_buffer - request for copy of the diag buffer
+ * @hdr - generic header
+ * @status -
+ * @reserved -
+ * @flags - misc flags
+ * @starting_offset - starting offset within drivers buffer where to start
+ *  reading data at into the specified application buffer
+ * @bytes_to_read - number of bytes to copy from the drivers buffer into the
+ *  application buffer starting at starting_offset.
+ * @unique_id - unique id associated with this buffer.
+ * @diagnostic_data - data payload
+ */
+struct mpt3_diag_read_buffer {
+	struct mpt3_ioctl_header hdr;
+	uint8_t status;
+	uint8_t reserved;
+	uint16_t flags;
+	uint32_t starting_offset;
+	uint32_t bytes_to_read;
+	uint32_t unique_id;
+	uint32_t diagnostic_data[1];
+};
+
+/**
+ * struct mpt3_addnl_diag_query - diagnostic buffer release reason
+ * @hdr - generic header
+ * @unique_id - unique id associated with this buffer.
+ * @rel_query - release query.
+ * @reserved2
+ */
+struct mpt3_addnl_diag_query {
+	struct mpt3_ioctl_header hdr;
+	uint32_t unique_id;
+	struct htb_rel_query rel_query;
+	uint32_t reserved2[2];
+};
+
+#endif /* MPT3SAS_CTL_H_INCLUDED */
diff --git a/drivers/scsi/mpt3sas/mpt3sas_debug.h b/drivers/scsi/mpt3sas/mpt3sas_debug.h
new file mode 100644
index 0000000000..cceeb2c16e
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_debug.h
@@ -0,0 +1,206 @@
+/*
+ * Logging Support for MPT (Message Passing Technology) based controllers
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_debug.c
+ * Copyright (C) 2012-2014  LSI Corporation
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#ifndef MPT3SAS_DEBUG_H_INCLUDED
+#define MPT3SAS_DEBUG_H_INCLUDED
+
+#define MPT_DEBUG			0x00000001
+#define MPT_DEBUG_MSG_FRAME		0x00000002
+#define MPT_DEBUG_SG			0x00000004
+#define MPT_DEBUG_EVENTS		0x00000008
+#define MPT_DEBUG_EVENT_WORK_TASK	0x00000010
+#define MPT_DEBUG_INIT			0x00000020
+#define MPT_DEBUG_EXIT			0x00000040
+#define MPT_DEBUG_FAIL			0x00000080
+#define MPT_DEBUG_TM			0x00000100
+#define MPT_DEBUG_REPLY		0x00000200
+#define MPT_DEBUG_HANDSHAKE		0x00000400
+#define MPT_DEBUG_CONFIG		0x00000800
+#define MPT_DEBUG_DL			0x00001000
+#define MPT_DEBUG_RESET		0x00002000
+#define MPT_DEBUG_SCSI			0x00004000
+#define MPT_DEBUG_IOCTL		0x00008000
+#define MPT_DEBUG_SAS			0x00020000
+#define MPT_DEBUG_TRANSPORT		0x00040000
+#define MPT_DEBUG_TASK_SET_FULL	0x00080000
+
+#define MPT_DEBUG_TRIGGER_DIAG		0x00200000
+
+
+#define MPT_CHECK_LOGGING(IOC, CMD, BITS)			\
+{								\
+	if (IOC->logging_level & BITS)				\
+		CMD;						\
+}
+
+/*
+ * debug macros
+ */
+
+#define dprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG)
+
+#define dsgprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SG)
+
+#define devtprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EVENTS)
+
+#define dewtprintk(IOC, CMD)		\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EVENT_WORK_TASK)
+
+#define dinitprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_INIT)
+
+#define dexitprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EXIT)
+
+#define dfailprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_FAIL)
+
+#define dtmprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TM)
+
+#define dreplyprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_REPLY)
+
+#define dhsprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_HANDSHAKE)
+
+#define dcprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_CONFIG)
+
+#define ddlprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_DL)
+
+#define drsprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_RESET)
+
+#define dsprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SCSI)
+
+#define dctlprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_IOCTL)
+
+#define dsasprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS)
+
+#define dsastransport(IOC, CMD)		\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS_WIDE)
+
+#define dmfprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_MSG_FRAME)
+
+#define dtsfprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TASK_SET_FULL)
+
+#define dtransportprintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TRANSPORT)
+
+#define dTriggerDiagPrintk(IOC, CMD)			\
+	MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TRIGGER_DIAG)
+
+
+
+/* inline functions for dumping debug data*/
+
+/**
+ * _debug_dump_mf - print message frame contents
+ * @mpi_request: pointer to message frame
+ * @sz: number of dwords
+ */
+static inline void
+_debug_dump_mf(void *mpi_request, int sz)
+{
+	int i;
+	__le32 *mfp = (__le32 *)mpi_request;
+
+	pr_info("mf:\n\t");
+	for (i = 0; i < sz; i++) {
+		if (i && ((i % 8) == 0))
+			pr_info("\n\t");
+		pr_info("%08x ", le32_to_cpu(mfp[i]));
+	}
+	pr_info("\n");
+}
+/**
+ * _debug_dump_reply - print message frame contents
+ * @mpi_request: pointer to message frame
+ * @sz: number of dwords
+ */
+static inline void
+_debug_dump_reply(void *mpi_request, int sz)
+{
+	int i;
+	__le32 *mfp = (__le32 *)mpi_request;
+
+	pr_info("reply:\n\t");
+	for (i = 0; i < sz; i++) {
+		if (i && ((i % 8) == 0))
+			pr_info("\n\t");
+		pr_info("%08x ", le32_to_cpu(mfp[i]));
+	}
+	pr_info("\n");
+}
+/**
+ * _debug_dump_config - print config page contents
+ * @mpi_request: pointer to message frame
+ * @sz: number of dwords
+ */
+static inline void
+_debug_dump_config(void *mpi_request, int sz)
+{
+	int i;
+	__le32 *mfp = (__le32 *)mpi_request;
+
+	pr_info("config:\n\t");
+	for (i = 0; i < sz; i++) {
+		if (i && ((i % 8) == 0))
+			pr_info("\n\t");
+		pr_info("%08x ", le32_to_cpu(mfp[i]));
+	}
+	pr_info("\n");
+}
+
+#endif /* MPT3SAS_DEBUG_H_INCLUDED */
diff --git a/drivers/scsi/mpt3sas/mpt3sas_debugfs.c b/drivers/scsi/mpt3sas/mpt3sas_debugfs.c
new file mode 100644
index 0000000000..a6ab1db811
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_debugfs.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Debugfs interface Support for MPT (Message Passing Technology) based
+ * controllers.
+ *
+ * Copyright (C) 2020  Broadcom Inc.
+ *
+ * Authors: Broadcom Inc.
+ * Sreekanth Reddy  <sreekanth.reddy@broadcom.com>
+ * Suganath Prabu <suganath-prabu.subramani@broadcom.com>
+ *
+ * Send feedback to : MPT-FusionLinux.pdl@broadcom.com)
+ *
+ **/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/compat.h>
+#include <linux/uio.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include "mpt3sas_base.h"
+#include <linux/debugfs.h>
+
+static struct dentry *mpt3sas_debugfs_root;
+
+/*
+ * _debugfs_iocdump_read - copy ioc dump from debugfs buffer
+ * @filep:	File Pointer
+ * @ubuf:	Buffer to fill data
+ * @cnt:	Length of the buffer
+ * @ppos:	Offset in the file
+ */
+
+static ssize_t
+_debugfs_iocdump_read(struct file *filp, char __user *ubuf, size_t cnt,
+	loff_t *ppos)
+
+{
+	struct mpt3sas_debugfs_buffer *debug = filp->private_data;
+
+	if (!debug || !debug->buf)
+		return 0;
+
+	return simple_read_from_buffer(ubuf, cnt, ppos, debug->buf, debug->len);
+}
+
+/*
+ * _debugfs_iocdump_open :	open the ioc_dump debugfs attribute file
+ */
+static int
+_debugfs_iocdump_open(struct inode *inode, struct file *file)
+{
+	struct MPT3SAS_ADAPTER *ioc = inode->i_private;
+	struct mpt3sas_debugfs_buffer *debug;
+
+	debug = kzalloc(sizeof(struct mpt3sas_debugfs_buffer), GFP_KERNEL);
+	if (!debug)
+		return -ENOMEM;
+
+	debug->buf = (void *)ioc;
+	debug->len = sizeof(struct MPT3SAS_ADAPTER);
+	file->private_data = debug;
+	return 0;
+}
+
+/*
+ * _debugfs_iocdump_release :	release the ioc_dump debugfs attribute
+ * @inode: inode structure to the corresponds device
+ * @file: File pointer
+ */
+static int
+_debugfs_iocdump_release(struct inode *inode, struct file *file)
+{
+	struct mpt3sas_debugfs_buffer *debug = file->private_data;
+
+	if (!debug)
+		return 0;
+
+	file->private_data = NULL;
+	kfree(debug);
+	return 0;
+}
+
+static const struct file_operations mpt3sas_debugfs_iocdump_fops = {
+	.owner		= THIS_MODULE,
+	.open           = _debugfs_iocdump_open,
+	.read           = _debugfs_iocdump_read,
+	.release        = _debugfs_iocdump_release,
+};
+
+/*
+ * mpt3sas_init_debugfs :	Create debugfs root for mpt3sas driver
+ */
+void mpt3sas_init_debugfs(void)
+{
+	mpt3sas_debugfs_root = debugfs_create_dir("mpt3sas", NULL);
+	if (!mpt3sas_debugfs_root)
+		pr_info("mpt3sas: Cannot create debugfs root\n");
+}
+
+/*
+ * mpt3sas_exit_debugfs :	Remove debugfs root for mpt3sas driver
+ */
+void mpt3sas_exit_debugfs(void)
+{
+	debugfs_remove_recursive(mpt3sas_debugfs_root);
+}
+
+/*
+ * mpt3sas_setup_debugfs :	Setup debugfs per HBA adapter
+ * ioc:				MPT3SAS_ADAPTER object
+ */
+void
+mpt3sas_setup_debugfs(struct MPT3SAS_ADAPTER *ioc)
+{
+	char name[64];
+
+	snprintf(name, sizeof(name), "scsi_host%d", ioc->shost->host_no);
+	if (!ioc->debugfs_root) {
+		ioc->debugfs_root =
+		    debugfs_create_dir(name, mpt3sas_debugfs_root);
+		if (!ioc->debugfs_root) {
+			dev_err(&ioc->pdev->dev,
+			    "Cannot create per adapter debugfs directory\n");
+			return;
+		}
+	}
+
+	snprintf(name, sizeof(name), "ioc_dump");
+	ioc->ioc_dump =	debugfs_create_file(name, 0444,
+	    ioc->debugfs_root, ioc, &mpt3sas_debugfs_iocdump_fops);
+	if (!ioc->ioc_dump) {
+		dev_err(&ioc->pdev->dev,
+		    "Cannot create ioc_dump debugfs file\n");
+		debugfs_remove(ioc->debugfs_root);
+		return;
+	}
+
+	snprintf(name, sizeof(name), "host_recovery");
+	debugfs_create_u8(name, 0444, ioc->debugfs_root, &ioc->shost_recovery);
+
+}
+
+/*
+ * mpt3sas_destroy_debugfs :	Destroy debugfs per HBA adapter
+ * @ioc:	MPT3SAS_ADAPTER object
+ */
+void mpt3sas_destroy_debugfs(struct MPT3SAS_ADAPTER *ioc)
+{
+	debugfs_remove_recursive(ioc->debugfs_root);
+}
+
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
new file mode 100644
index 0000000000..605013d3ee
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -0,0 +1,12942 @@
+/*
+ * Scsi Host Layer for MPT (Message Passing Technology) based controllers
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_scsih.c
+ * Copyright (C) 2012-2014  LSI Corporation
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/blkdev.h>
+#include <linux/sched.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/raid_class.h>
+#include <linux/blk-mq-pci.h>
+#include <asm/unaligned.h>
+
+#include "mpt3sas_base.h"
+
+#define RAID_CHANNEL 1
+
+#define PCIE_CHANNEL 2
+
+/* forward proto's */
+static void _scsih_expander_node_remove(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_expander);
+static void _firmware_event_work(struct work_struct *work);
+
+static void _scsih_remove_device(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_device *sas_device);
+static int _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	u8 retry_count, u8 is_pd);
+static int _scsih_pcie_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle);
+static void _scsih_pcie_device_remove_from_sml(struct MPT3SAS_ADAPTER *ioc,
+	struct _pcie_device *pcie_device);
+static void
+_scsih_pcie_check_device(struct MPT3SAS_ADAPTER *ioc, u16 handle);
+static u8 _scsih_check_for_pending_tm(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+static void _scsih_complete_devices_scanning(struct MPT3SAS_ADAPTER *ioc);
+
+/* global parameters */
+LIST_HEAD(mpt3sas_ioc_list);
+/* global ioc lock for list operations */
+DEFINE_SPINLOCK(gioc_lock);
+
+MODULE_AUTHOR(MPT3SAS_AUTHOR);
+MODULE_DESCRIPTION(MPT3SAS_DESCRIPTION);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(MPT3SAS_DRIVER_VERSION);
+MODULE_ALIAS("mpt2sas");
+
+/* local parameters */
+static u8 scsi_io_cb_idx = -1;
+static u8 tm_cb_idx = -1;
+static u8 ctl_cb_idx = -1;
+static u8 base_cb_idx = -1;
+static u8 port_enable_cb_idx = -1;
+static u8 transport_cb_idx = -1;
+static u8 scsih_cb_idx = -1;
+static u8 config_cb_idx = -1;
+static int mpt2_ids;
+static int mpt3_ids;
+
+static u8 tm_tr_cb_idx = -1 ;
+static u8 tm_tr_volume_cb_idx = -1 ;
+static u8 tm_sas_control_cb_idx = -1;
+
+/* command line options */
+static u32 logging_level;
+MODULE_PARM_DESC(logging_level,
+	" bits for enabling additional logging info (default=0)");
+
+
+static ushort max_sectors = 0xFFFF;
+module_param(max_sectors, ushort, 0444);
+MODULE_PARM_DESC(max_sectors, "max sectors, range 64 to 32767  default=32767");
+
+
+static int missing_delay[2] = {-1, -1};
+module_param_array(missing_delay, int, NULL, 0444);
+MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay");
+
+/* scsi-mid layer global parmeter is max_report_luns, which is 511 */
+#define MPT3SAS_MAX_LUN (16895)
+static u64 max_lun = MPT3SAS_MAX_LUN;
+module_param(max_lun, ullong, 0444);
+MODULE_PARM_DESC(max_lun, " max lun, default=16895 ");
+
+static ushort hbas_to_enumerate;
+module_param(hbas_to_enumerate, ushort, 0444);
+MODULE_PARM_DESC(hbas_to_enumerate,
+		" 0 - enumerates both SAS 2.0 & SAS 3.0 generation HBAs\n \
+		  1 - enumerates only SAS 2.0 generation HBAs\n \
+		  2 - enumerates only SAS 3.0 generation HBAs (default=0)");
+
+/* diag_buffer_enable is bitwise
+ * bit 0 set = TRACE
+ * bit 1 set = SNAPSHOT
+ * bit 2 set = EXTENDED
+ *
+ * Either bit can be set, or both
+ */
+static int diag_buffer_enable = -1;
+module_param(diag_buffer_enable, int, 0444);
+MODULE_PARM_DESC(diag_buffer_enable,
+	" post diag buffers (TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)");
+static int disable_discovery = -1;
+module_param(disable_discovery, int, 0444);
+MODULE_PARM_DESC(disable_discovery, " disable discovery ");
+
+
+/* permit overriding the host protection capabilities mask (EEDP/T10 PI) */
+static int prot_mask = -1;
+module_param(prot_mask, int, 0444);
+MODULE_PARM_DESC(prot_mask, " host protection capabilities mask, def=7 ");
+
+static bool enable_sdev_max_qd;
+module_param(enable_sdev_max_qd, bool, 0444);
+MODULE_PARM_DESC(enable_sdev_max_qd,
+	"Enable sdev max qd as can_queue, def=disabled(0)");
+
+static int multipath_on_hba = -1;
+module_param(multipath_on_hba, int, 0);
+MODULE_PARM_DESC(multipath_on_hba,
+	"Multipath support to add same target device\n\t\t"
+	"as many times as it is visible to HBA from various paths\n\t\t"
+	"(by default:\n\t\t"
+	"\t SAS 2.0 & SAS 3.0 HBA - This will be disabled,\n\t\t"
+	"\t SAS 3.5 HBA - This will be enabled)");
+
+static int host_tagset_enable = 1;
+module_param(host_tagset_enable, int, 0444);
+MODULE_PARM_DESC(host_tagset_enable,
+	"Shared host tagset enable/disable Default: enable(1)");
+
+/* raid transport support */
+static struct raid_template *mpt3sas_raid_template;
+static struct raid_template *mpt2sas_raid_template;
+
+
+/**
+ * struct sense_info - common structure for obtaining sense keys
+ * @skey: sense key
+ * @asc: additional sense code
+ * @ascq: additional sense code qualifier
+ */
+struct sense_info {
+	u8 skey;
+	u8 asc;
+	u8 ascq;
+};
+
+#define MPT3SAS_PROCESS_TRIGGER_DIAG (0xFFFB)
+#define MPT3SAS_TURN_ON_PFA_LED (0xFFFC)
+#define MPT3SAS_PORT_ENABLE_COMPLETE (0xFFFD)
+#define MPT3SAS_ABRT_TASK_SET (0xFFFE)
+#define MPT3SAS_REMOVE_UNRESPONDING_DEVICES (0xFFFF)
+/**
+ * struct fw_event_work - firmware event struct
+ * @list: link list framework
+ * @work: work object (ioc->fault_reset_work_q)
+ * @ioc: per adapter object
+ * @device_handle: device handle
+ * @VF_ID: virtual function id
+ * @VP_ID: virtual port id
+ * @ignore: flag meaning this event has been marked to ignore
+ * @event: firmware event MPI2_EVENT_XXX defined in mpi2_ioc.h
+ * @refcount: kref for this event
+ * @event_data: reply event data payload follows
+ *
+ * This object stored on ioc->fw_event_list.
+ */
+struct fw_event_work {
+	struct list_head	list;
+	struct work_struct	work;
+
+	struct MPT3SAS_ADAPTER *ioc;
+	u16			device_handle;
+	u8			VF_ID;
+	u8			VP_ID;
+	u8			ignore;
+	u16			event;
+	struct kref		refcount;
+	char			event_data[] __aligned(4);
+};
+
+static void fw_event_work_free(struct kref *r)
+{
+	kfree(container_of(r, struct fw_event_work, refcount));
+}
+
+static void fw_event_work_get(struct fw_event_work *fw_work)
+{
+	kref_get(&fw_work->refcount);
+}
+
+static void fw_event_work_put(struct fw_event_work *fw_work)
+{
+	kref_put(&fw_work->refcount, fw_event_work_free);
+}
+
+static struct fw_event_work *alloc_fw_event_work(int len)
+{
+	struct fw_event_work *fw_event;
+
+	fw_event = kzalloc(sizeof(*fw_event) + len, GFP_ATOMIC);
+	if (!fw_event)
+		return NULL;
+
+	kref_init(&fw_event->refcount);
+	return fw_event;
+}
+
+/**
+ * struct _scsi_io_transfer - scsi io transfer
+ * @handle: sas device handle (assigned by firmware)
+ * @is_raid: flag set for hidden raid components
+ * @dir: DMA_TO_DEVICE, DMA_FROM_DEVICE,
+ * @data_length: data transfer length
+ * @data_dma: dma pointer to data
+ * @sense: sense data
+ * @lun: lun number
+ * @cdb_length: cdb length
+ * @cdb: cdb contents
+ * @timeout: timeout for this command
+ * @VF_ID: virtual function id
+ * @VP_ID: virtual port id
+ * @valid_reply: flag set for reply message
+ * @sense_length: sense length
+ * @ioc_status: ioc status
+ * @scsi_state: scsi state
+ * @scsi_status: scsi staus
+ * @log_info: log information
+ * @transfer_length: data length transfer when there is a reply message
+ *
+ * Used for sending internal scsi commands to devices within this module.
+ * Refer to _scsi_send_scsi_io().
+ */
+struct _scsi_io_transfer {
+	u16	handle;
+	u8	is_raid;
+	enum dma_data_direction dir;
+	u32	data_length;
+	dma_addr_t data_dma;
+	u8	sense[SCSI_SENSE_BUFFERSIZE];
+	u32	lun;
+	u8	cdb_length;
+	u8	cdb[32];
+	u8	timeout;
+	u8	VF_ID;
+	u8	VP_ID;
+	u8	valid_reply;
+  /* the following bits are only valid when 'valid_reply = 1' */
+	u32	sense_length;
+	u16	ioc_status;
+	u8	scsi_state;
+	u8	scsi_status;
+	u32	log_info;
+	u32	transfer_length;
+};
+
+/**
+ * _scsih_set_debug_level - global setting of ioc->logging_level.
+ * @val: ?
+ * @kp: ?
+ *
+ * Note: The logging levels are defined in mpt3sas_debug.h.
+ */
+static int
+_scsih_set_debug_level(const char *val, const struct kernel_param *kp)
+{
+	int ret = param_set_int(val, kp);
+	struct MPT3SAS_ADAPTER *ioc;
+
+	if (ret)
+		return ret;
+
+	pr_info("setting logging_level(0x%08x)\n", logging_level);
+	spin_lock(&gioc_lock);
+	list_for_each_entry(ioc, &mpt3sas_ioc_list, list)
+		ioc->logging_level = logging_level;
+	spin_unlock(&gioc_lock);
+	return 0;
+}
+module_param_call(logging_level, _scsih_set_debug_level, param_get_int,
+	&logging_level, 0644);
+
+/**
+ * _scsih_srch_boot_sas_address - search based on sas_address
+ * @sas_address: sas address
+ * @boot_device: boot device object from bios page 2
+ *
+ * Return: 1 when there's a match, 0 means no match.
+ */
+static inline int
+_scsih_srch_boot_sas_address(u64 sas_address,
+	Mpi2BootDeviceSasWwid_t *boot_device)
+{
+	return (sas_address == le64_to_cpu(boot_device->SASAddress)) ?  1 : 0;
+}
+
+/**
+ * _scsih_srch_boot_device_name - search based on device name
+ * @device_name: device name specified in INDENTIFY fram
+ * @boot_device: boot device object from bios page 2
+ *
+ * Return: 1 when there's a match, 0 means no match.
+ */
+static inline int
+_scsih_srch_boot_device_name(u64 device_name,
+	Mpi2BootDeviceDeviceName_t *boot_device)
+{
+	return (device_name == le64_to_cpu(boot_device->DeviceName)) ? 1 : 0;
+}
+
+/**
+ * _scsih_srch_boot_encl_slot - search based on enclosure_logical_id/slot
+ * @enclosure_logical_id: enclosure logical id
+ * @slot_number: slot number
+ * @boot_device: boot device object from bios page 2
+ *
+ * Return: 1 when there's a match, 0 means no match.
+ */
+static inline int
+_scsih_srch_boot_encl_slot(u64 enclosure_logical_id, u16 slot_number,
+	Mpi2BootDeviceEnclosureSlot_t *boot_device)
+{
+	return (enclosure_logical_id == le64_to_cpu(boot_device->
+	    EnclosureLogicalID) && slot_number == le16_to_cpu(boot_device->
+	    SlotNumber)) ? 1 : 0;
+}
+
+/**
+ * mpt3sas_get_port_by_id - get hba port entry corresponding to provided
+ *			  port number from port list
+ * @ioc: per adapter object
+ * @port_id: port number
+ * @bypass_dirty_port_flag: when set look the matching hba port entry even
+ *			if hba port entry is marked as dirty.
+ *
+ * Search for hba port entry corresponding to provided port number,
+ * if available return port object otherwise return NULL.
+ */
+struct hba_port *
+mpt3sas_get_port_by_id(struct MPT3SAS_ADAPTER *ioc,
+	u8 port_id, u8 bypass_dirty_port_flag)
+{
+	struct hba_port *port, *port_next;
+
+	/*
+	 * When multipath_on_hba is disabled then
+	 * search the hba_port entry using default
+	 * port id i.e. 255
+	 */
+	if (!ioc->multipath_on_hba)
+		port_id = MULTIPATH_DISABLED_PORT_ID;
+
+	list_for_each_entry_safe(port, port_next,
+	    &ioc->port_table_list, list) {
+		if (port->port_id != port_id)
+			continue;
+		if (bypass_dirty_port_flag)
+			return port;
+		if (port->flags & HBA_PORT_FLAG_DIRTY_PORT)
+			continue;
+		return port;
+	}
+
+	/*
+	 * Allocate hba_port object for default port id (i.e. 255)
+	 * when multipath_on_hba is disabled for the HBA.
+	 * And add this object to port_table_list.
+	 */
+	if (!ioc->multipath_on_hba) {
+		port = kzalloc(sizeof(struct hba_port), GFP_ATOMIC);
+		if (!port)
+			return NULL;
+
+		port->port_id = port_id;
+		ioc_info(ioc,
+		   "hba_port entry: %p, port: %d is added to hba_port list\n",
+		   port, port->port_id);
+		list_add_tail(&port->list,
+		    &ioc->port_table_list);
+		return port;
+	}
+	return NULL;
+}
+
+/**
+ * mpt3sas_get_vphy_by_phy - get virtual_phy object corresponding to phy number
+ * @ioc: per adapter object
+ * @port: hba_port object
+ * @phy: phy number
+ *
+ * Return virtual_phy object corresponding to phy number.
+ */
+struct virtual_phy *
+mpt3sas_get_vphy_by_phy(struct MPT3SAS_ADAPTER *ioc,
+	struct hba_port *port, u32 phy)
+{
+	struct virtual_phy *vphy, *vphy_next;
+
+	if (!port->vphys_mask)
+		return NULL;
+
+	list_for_each_entry_safe(vphy, vphy_next, &port->vphys_list, list) {
+		if (vphy->phy_mask & (1 << phy))
+			return vphy;
+	}
+	return NULL;
+}
+
+/**
+ * _scsih_is_boot_device - search for matching boot device.
+ * @sas_address: sas address
+ * @device_name: device name specified in INDENTIFY fram
+ * @enclosure_logical_id: enclosure logical id
+ * @slot: slot number
+ * @form: specifies boot device form
+ * @boot_device: boot device object from bios page 2
+ *
+ * Return: 1 when there's a match, 0 means no match.
+ */
+static int
+_scsih_is_boot_device(u64 sas_address, u64 device_name,
+	u64 enclosure_logical_id, u16 slot, u8 form,
+	Mpi2BiosPage2BootDevice_t *boot_device)
+{
+	int rc = 0;
+
+	switch (form) {
+	case MPI2_BIOSPAGE2_FORM_SAS_WWID:
+		if (!sas_address)
+			break;
+		rc = _scsih_srch_boot_sas_address(
+		    sas_address, &boot_device->SasWwid);
+		break;
+	case MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT:
+		if (!enclosure_logical_id)
+			break;
+		rc = _scsih_srch_boot_encl_slot(
+		    enclosure_logical_id,
+		    slot, &boot_device->EnclosureSlot);
+		break;
+	case MPI2_BIOSPAGE2_FORM_DEVICE_NAME:
+		if (!device_name)
+			break;
+		rc = _scsih_srch_boot_device_name(
+		    device_name, &boot_device->DeviceName);
+		break;
+	case MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED:
+		break;
+	}
+
+	return rc;
+}
+
+/**
+ * _scsih_get_sas_address - set the sas_address for given device handle
+ * @ioc: ?
+ * @handle: device handle
+ * @sas_address: sas address
+ *
+ * Return: 0 success, non-zero when failure
+ */
+static int
+_scsih_get_sas_address(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	u64 *sas_address)
+{
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u32 ioc_status;
+
+	*sas_address = 0;
+
+	if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return -ENXIO;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+		/* For HBA, vSES doesn't return HBA SAS address. Instead return
+		 * vSES's sas address.
+		 */
+		if ((handle <= ioc->sas_hba.num_phys) &&
+		   (!(le32_to_cpu(sas_device_pg0.DeviceInfo) &
+		   MPI2_SAS_DEVICE_INFO_SEP)))
+			*sas_address = ioc->sas_hba.sas_address;
+		else
+			*sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+		return 0;
+	}
+
+	/* we hit this because the given parent handle doesn't exist */
+	if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+		return -ENXIO;
+
+	/* else error case */
+	ioc_err(ioc, "handle(0x%04x), ioc_status(0x%04x), failure at %s:%d/%s()!\n",
+		handle, ioc_status, __FILE__, __LINE__, __func__);
+	return -EIO;
+}
+
+/**
+ * _scsih_determine_boot_device - determine boot device.
+ * @ioc: per adapter object
+ * @device: sas_device or pcie_device object
+ * @channel: SAS or PCIe channel
+ *
+ * Determines whether this device should be first reported device to
+ * to scsi-ml or sas transport, this purpose is for persistent boot device.
+ * There are primary, alternate, and current entries in bios page 2. The order
+ * priority is primary, alternate, then current.  This routine saves
+ * the corresponding device object.
+ * The saved data to be used later in _scsih_probe_boot_devices().
+ */
+static void
+_scsih_determine_boot_device(struct MPT3SAS_ADAPTER *ioc, void *device,
+	u32 channel)
+{
+	struct _sas_device *sas_device;
+	struct _pcie_device *pcie_device;
+	struct _raid_device *raid_device;
+	u64 sas_address;
+	u64 device_name;
+	u64 enclosure_logical_id;
+	u16 slot;
+
+	 /* only process this function when driver loads */
+	if (!ioc->is_driver_loading)
+		return;
+
+	 /* no Bios, return immediately */
+	if (!ioc->bios_pg3.BiosVersion)
+		return;
+
+	if (channel == RAID_CHANNEL) {
+		raid_device = device;
+		sas_address = raid_device->wwid;
+		device_name = 0;
+		enclosure_logical_id = 0;
+		slot = 0;
+	} else if (channel == PCIE_CHANNEL) {
+		pcie_device = device;
+		sas_address = pcie_device->wwid;
+		device_name = 0;
+		enclosure_logical_id = 0;
+		slot = 0;
+	} else {
+		sas_device = device;
+		sas_address = sas_device->sas_address;
+		device_name = sas_device->device_name;
+		enclosure_logical_id = sas_device->enclosure_logical_id;
+		slot = sas_device->slot;
+	}
+
+	if (!ioc->req_boot_device.device) {
+		if (_scsih_is_boot_device(sas_address, device_name,
+		    enclosure_logical_id, slot,
+		    (ioc->bios_pg2.ReqBootDeviceForm &
+		    MPI2_BIOSPAGE2_FORM_MASK),
+		    &ioc->bios_pg2.RequestedBootDevice)) {
+			dinitprintk(ioc,
+				    ioc_info(ioc, "%s: req_boot_device(0x%016llx)\n",
+					     __func__, (u64)sas_address));
+			ioc->req_boot_device.device = device;
+			ioc->req_boot_device.channel = channel;
+		}
+	}
+
+	if (!ioc->req_alt_boot_device.device) {
+		if (_scsih_is_boot_device(sas_address, device_name,
+		    enclosure_logical_id, slot,
+		    (ioc->bios_pg2.ReqAltBootDeviceForm &
+		    MPI2_BIOSPAGE2_FORM_MASK),
+		    &ioc->bios_pg2.RequestedAltBootDevice)) {
+			dinitprintk(ioc,
+				    ioc_info(ioc, "%s: req_alt_boot_device(0x%016llx)\n",
+					     __func__, (u64)sas_address));
+			ioc->req_alt_boot_device.device = device;
+			ioc->req_alt_boot_device.channel = channel;
+		}
+	}
+
+	if (!ioc->current_boot_device.device) {
+		if (_scsih_is_boot_device(sas_address, device_name,
+		    enclosure_logical_id, slot,
+		    (ioc->bios_pg2.CurrentBootDeviceForm &
+		    MPI2_BIOSPAGE2_FORM_MASK),
+		    &ioc->bios_pg2.CurrentBootDevice)) {
+			dinitprintk(ioc,
+				    ioc_info(ioc, "%s: current_boot_device(0x%016llx)\n",
+					     __func__, (u64)sas_address));
+			ioc->current_boot_device.device = device;
+			ioc->current_boot_device.channel = channel;
+		}
+	}
+}
+
+static struct _sas_device *
+__mpt3sas_get_sdev_from_target(struct MPT3SAS_ADAPTER *ioc,
+		struct MPT3SAS_TARGET *tgt_priv)
+{
+	struct _sas_device *ret;
+
+	assert_spin_locked(&ioc->sas_device_lock);
+
+	ret = tgt_priv->sas_dev;
+	if (ret)
+		sas_device_get(ret);
+
+	return ret;
+}
+
+static struct _sas_device *
+mpt3sas_get_sdev_from_target(struct MPT3SAS_ADAPTER *ioc,
+		struct MPT3SAS_TARGET *tgt_priv)
+{
+	struct _sas_device *ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	ret = __mpt3sas_get_sdev_from_target(ioc, tgt_priv);
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	return ret;
+}
+
+static struct _pcie_device *
+__mpt3sas_get_pdev_from_target(struct MPT3SAS_ADAPTER *ioc,
+	struct MPT3SAS_TARGET *tgt_priv)
+{
+	struct _pcie_device *ret;
+
+	assert_spin_locked(&ioc->pcie_device_lock);
+
+	ret = tgt_priv->pcie_dev;
+	if (ret)
+		pcie_device_get(ret);
+
+	return ret;
+}
+
+/**
+ * mpt3sas_get_pdev_from_target - pcie device search
+ * @ioc: per adapter object
+ * @tgt_priv: starget private object
+ *
+ * Context: This function will acquire ioc->pcie_device_lock and will release
+ * before returning the pcie_device object.
+ *
+ * This searches for pcie_device from target, then return pcie_device object.
+ */
+static struct _pcie_device *
+mpt3sas_get_pdev_from_target(struct MPT3SAS_ADAPTER *ioc,
+	struct MPT3SAS_TARGET *tgt_priv)
+{
+	struct _pcie_device *ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	ret = __mpt3sas_get_pdev_from_target(ioc, tgt_priv);
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+	return ret;
+}
+
+
+/**
+ * __mpt3sas_get_sdev_by_rphy - sas device search
+ * @ioc: per adapter object
+ * @rphy: sas_rphy pointer
+ *
+ * Context: This function will acquire ioc->sas_device_lock and will release
+ * before returning the sas_device object.
+ *
+ * This searches for sas_device from rphy object
+ * then return sas_device object.
+ */
+struct _sas_device *
+__mpt3sas_get_sdev_by_rphy(struct MPT3SAS_ADAPTER *ioc,
+	struct sas_rphy *rphy)
+{
+	struct _sas_device *sas_device;
+
+	assert_spin_locked(&ioc->sas_device_lock);
+
+	list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
+		if (sas_device->rphy != rphy)
+			continue;
+		sas_device_get(sas_device);
+		return sas_device;
+	}
+
+	sas_device = NULL;
+	list_for_each_entry(sas_device, &ioc->sas_device_init_list, list) {
+		if (sas_device->rphy != rphy)
+			continue;
+		sas_device_get(sas_device);
+		return sas_device;
+	}
+
+	return NULL;
+}
+
+/**
+ * __mpt3sas_get_sdev_by_addr - get _sas_device object corresponding to provided
+ *				sas address from sas_device_list list
+ * @ioc: per adapter object
+ * @sas_address: device sas address
+ * @port: port number
+ *
+ * Search for _sas_device object corresponding to provided sas address,
+ * if available return _sas_device object address otherwise return NULL.
+ */
+struct _sas_device *
+__mpt3sas_get_sdev_by_addr(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address, struct hba_port *port)
+{
+	struct _sas_device *sas_device;
+
+	if (!port)
+		return NULL;
+
+	assert_spin_locked(&ioc->sas_device_lock);
+
+	list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
+		if (sas_device->sas_address != sas_address)
+			continue;
+		if (sas_device->port != port)
+			continue;
+		sas_device_get(sas_device);
+		return sas_device;
+	}
+
+	list_for_each_entry(sas_device, &ioc->sas_device_init_list, list) {
+		if (sas_device->sas_address != sas_address)
+			continue;
+		if (sas_device->port != port)
+			continue;
+		sas_device_get(sas_device);
+		return sas_device;
+	}
+
+	return NULL;
+}
+
+/**
+ * mpt3sas_get_sdev_by_addr - sas device search
+ * @ioc: per adapter object
+ * @sas_address: sas address
+ * @port: hba port entry
+ * Context: Calling function should acquire ioc->sas_device_lock
+ *
+ * This searches for sas_device based on sas_address & port number,
+ * then return sas_device object.
+ */
+struct _sas_device *
+mpt3sas_get_sdev_by_addr(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address, struct hba_port *port)
+{
+	struct _sas_device *sas_device;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_by_addr(ioc,
+	    sas_address, port);
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	return sas_device;
+}
+
+static struct _sas_device *
+__mpt3sas_get_sdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _sas_device *sas_device;
+
+	assert_spin_locked(&ioc->sas_device_lock);
+
+	list_for_each_entry(sas_device, &ioc->sas_device_list, list)
+		if (sas_device->handle == handle)
+			goto found_device;
+
+	list_for_each_entry(sas_device, &ioc->sas_device_init_list, list)
+		if (sas_device->handle == handle)
+			goto found_device;
+
+	return NULL;
+
+found_device:
+	sas_device_get(sas_device);
+	return sas_device;
+}
+
+/**
+ * mpt3sas_get_sdev_by_handle - sas device search
+ * @ioc: per adapter object
+ * @handle: sas device handle (assigned by firmware)
+ * Context: Calling function should acquire ioc->sas_device_lock
+ *
+ * This searches for sas_device based on sas_address, then return sas_device
+ * object.
+ */
+struct _sas_device *
+mpt3sas_get_sdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _sas_device *sas_device;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	return sas_device;
+}
+
+/**
+ * _scsih_display_enclosure_chassis_info - display device location info
+ * @ioc: per adapter object
+ * @sas_device: per sas device object
+ * @sdev: scsi device struct
+ * @starget: scsi target struct
+ */
+static void
+_scsih_display_enclosure_chassis_info(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_device *sas_device, struct scsi_device *sdev,
+	struct scsi_target *starget)
+{
+	if (sdev) {
+		if (sas_device->enclosure_handle != 0)
+			sdev_printk(KERN_INFO, sdev,
+			    "enclosure logical id (0x%016llx), slot(%d) \n",
+			    (unsigned long long)
+			    sas_device->enclosure_logical_id,
+			    sas_device->slot);
+		if (sas_device->connector_name[0] != '\0')
+			sdev_printk(KERN_INFO, sdev,
+			    "enclosure level(0x%04x), connector name( %s)\n",
+			    sas_device->enclosure_level,
+			    sas_device->connector_name);
+		if (sas_device->is_chassis_slot_valid)
+			sdev_printk(KERN_INFO, sdev, "chassis slot(0x%04x)\n",
+			    sas_device->chassis_slot);
+	} else if (starget) {
+		if (sas_device->enclosure_handle != 0)
+			starget_printk(KERN_INFO, starget,
+			    "enclosure logical id(0x%016llx), slot(%d) \n",
+			    (unsigned long long)
+			    sas_device->enclosure_logical_id,
+			    sas_device->slot);
+		if (sas_device->connector_name[0] != '\0')
+			starget_printk(KERN_INFO, starget,
+			    "enclosure level(0x%04x), connector name( %s)\n",
+			    sas_device->enclosure_level,
+			    sas_device->connector_name);
+		if (sas_device->is_chassis_slot_valid)
+			starget_printk(KERN_INFO, starget,
+			    "chassis slot(0x%04x)\n",
+			    sas_device->chassis_slot);
+	} else {
+		if (sas_device->enclosure_handle != 0)
+			ioc_info(ioc, "enclosure logical id(0x%016llx), slot(%d)\n",
+				 (u64)sas_device->enclosure_logical_id,
+				 sas_device->slot);
+		if (sas_device->connector_name[0] != '\0')
+			ioc_info(ioc, "enclosure level(0x%04x), connector name( %s)\n",
+				 sas_device->enclosure_level,
+				 sas_device->connector_name);
+		if (sas_device->is_chassis_slot_valid)
+			ioc_info(ioc, "chassis slot(0x%04x)\n",
+				 sas_device->chassis_slot);
+	}
+}
+
+/**
+ * _scsih_sas_device_remove - remove sas_device from list.
+ * @ioc: per adapter object
+ * @sas_device: the sas_device object
+ * Context: This function will acquire ioc->sas_device_lock.
+ *
+ * If sas_device is on the list, remove it and decrement its reference count.
+ */
+static void
+_scsih_sas_device_remove(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_device *sas_device)
+{
+	unsigned long flags;
+
+	if (!sas_device)
+		return;
+	ioc_info(ioc, "removing handle(0x%04x), sas_addr(0x%016llx)\n",
+		 sas_device->handle, (u64)sas_device->sas_address);
+
+	_scsih_display_enclosure_chassis_info(ioc, sas_device, NULL, NULL);
+
+	/*
+	 * The lock serializes access to the list, but we still need to verify
+	 * that nobody removed the entry while we were waiting on the lock.
+	 */
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	if (!list_empty(&sas_device->list)) {
+		list_del_init(&sas_device->list);
+		sas_device_put(sas_device);
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+}
+
+/**
+ * _scsih_device_remove_by_handle - removing device object by handle
+ * @ioc: per adapter object
+ * @handle: device handle
+ */
+static void
+_scsih_device_remove_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _sas_device *sas_device;
+	unsigned long flags;
+
+	if (ioc->shost_recovery)
+		return;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
+	if (sas_device) {
+		list_del_init(&sas_device->list);
+		sas_device_put(sas_device);
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	if (sas_device) {
+		_scsih_remove_device(ioc, sas_device);
+		sas_device_put(sas_device);
+	}
+}
+
+/**
+ * mpt3sas_device_remove_by_sas_address - removing device object by
+ *					sas address & port number
+ * @ioc: per adapter object
+ * @sas_address: device sas_address
+ * @port: hba port entry
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_device_remove_by_sas_address(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address, struct hba_port *port)
+{
+	struct _sas_device *sas_device;
+	unsigned long flags;
+
+	if (ioc->shost_recovery)
+		return;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_by_addr(ioc, sas_address, port);
+	if (sas_device) {
+		list_del_init(&sas_device->list);
+		sas_device_put(sas_device);
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	if (sas_device) {
+		_scsih_remove_device(ioc, sas_device);
+		sas_device_put(sas_device);
+	}
+}
+
+/**
+ * _scsih_sas_device_add - insert sas_device to the list.
+ * @ioc: per adapter object
+ * @sas_device: the sas_device object
+ * Context: This function will acquire ioc->sas_device_lock.
+ *
+ * Adding new object to the ioc->sas_device_list.
+ */
+static void
+_scsih_sas_device_add(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_device *sas_device)
+{
+	unsigned long flags;
+
+	dewtprintk(ioc,
+		   ioc_info(ioc, "%s: handle(0x%04x), sas_addr(0x%016llx)\n",
+			    __func__, sas_device->handle,
+			    (u64)sas_device->sas_address));
+
+	dewtprintk(ioc, _scsih_display_enclosure_chassis_info(ioc, sas_device,
+	    NULL, NULL));
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device_get(sas_device);
+	list_add_tail(&sas_device->list, &ioc->sas_device_list);
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	if (ioc->hide_drives) {
+		clear_bit(sas_device->handle, ioc->pend_os_device_add);
+		return;
+	}
+
+	if (!mpt3sas_transport_port_add(ioc, sas_device->handle,
+	     sas_device->sas_address_parent, sas_device->port)) {
+		_scsih_sas_device_remove(ioc, sas_device);
+	} else if (!sas_device->starget) {
+		/*
+		 * When asyn scanning is enabled, its not possible to remove
+		 * devices while scanning is turned on due to an oops in
+		 * scsi_sysfs_add_sdev()->add_device()->sysfs_addrm_start()
+		 */
+		if (!ioc->is_driver_loading) {
+			mpt3sas_transport_port_remove(ioc,
+			    sas_device->sas_address,
+			    sas_device->sas_address_parent,
+			    sas_device->port);
+			_scsih_sas_device_remove(ioc, sas_device);
+		}
+	} else
+		clear_bit(sas_device->handle, ioc->pend_os_device_add);
+}
+
+/**
+ * _scsih_sas_device_init_add - insert sas_device to the list.
+ * @ioc: per adapter object
+ * @sas_device: the sas_device object
+ * Context: This function will acquire ioc->sas_device_lock.
+ *
+ * Adding new object at driver load time to the ioc->sas_device_init_list.
+ */
+static void
+_scsih_sas_device_init_add(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_device *sas_device)
+{
+	unsigned long flags;
+
+	dewtprintk(ioc,
+		   ioc_info(ioc, "%s: handle(0x%04x), sas_addr(0x%016llx)\n",
+			    __func__, sas_device->handle,
+			    (u64)sas_device->sas_address));
+
+	dewtprintk(ioc, _scsih_display_enclosure_chassis_info(ioc, sas_device,
+	    NULL, NULL));
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device_get(sas_device);
+	list_add_tail(&sas_device->list, &ioc->sas_device_init_list);
+	_scsih_determine_boot_device(ioc, sas_device, 0);
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+}
+
+
+static struct _pcie_device *
+__mpt3sas_get_pdev_by_wwid(struct MPT3SAS_ADAPTER *ioc, u64 wwid)
+{
+	struct _pcie_device *pcie_device;
+
+	assert_spin_locked(&ioc->pcie_device_lock);
+
+	list_for_each_entry(pcie_device, &ioc->pcie_device_list, list)
+		if (pcie_device->wwid == wwid)
+			goto found_device;
+
+	list_for_each_entry(pcie_device, &ioc->pcie_device_init_list, list)
+		if (pcie_device->wwid == wwid)
+			goto found_device;
+
+	return NULL;
+
+found_device:
+	pcie_device_get(pcie_device);
+	return pcie_device;
+}
+
+
+/**
+ * mpt3sas_get_pdev_by_wwid - pcie device search
+ * @ioc: per adapter object
+ * @wwid: wwid
+ *
+ * Context: This function will acquire ioc->pcie_device_lock and will release
+ * before returning the pcie_device object.
+ *
+ * This searches for pcie_device based on wwid, then return pcie_device object.
+ */
+static struct _pcie_device *
+mpt3sas_get_pdev_by_wwid(struct MPT3SAS_ADAPTER *ioc, u64 wwid)
+{
+	struct _pcie_device *pcie_device;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	pcie_device = __mpt3sas_get_pdev_by_wwid(ioc, wwid);
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+	return pcie_device;
+}
+
+
+static struct _pcie_device *
+__mpt3sas_get_pdev_by_idchannel(struct MPT3SAS_ADAPTER *ioc, int id,
+	int channel)
+{
+	struct _pcie_device *pcie_device;
+
+	assert_spin_locked(&ioc->pcie_device_lock);
+
+	list_for_each_entry(pcie_device, &ioc->pcie_device_list, list)
+		if (pcie_device->id == id && pcie_device->channel == channel)
+			goto found_device;
+
+	list_for_each_entry(pcie_device, &ioc->pcie_device_init_list, list)
+		if (pcie_device->id == id && pcie_device->channel == channel)
+			goto found_device;
+
+	return NULL;
+
+found_device:
+	pcie_device_get(pcie_device);
+	return pcie_device;
+}
+
+static struct _pcie_device *
+__mpt3sas_get_pdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _pcie_device *pcie_device;
+
+	assert_spin_locked(&ioc->pcie_device_lock);
+
+	list_for_each_entry(pcie_device, &ioc->pcie_device_list, list)
+		if (pcie_device->handle == handle)
+			goto found_device;
+
+	list_for_each_entry(pcie_device, &ioc->pcie_device_init_list, list)
+		if (pcie_device->handle == handle)
+			goto found_device;
+
+	return NULL;
+
+found_device:
+	pcie_device_get(pcie_device);
+	return pcie_device;
+}
+
+
+/**
+ * mpt3sas_get_pdev_by_handle - pcie device search
+ * @ioc: per adapter object
+ * @handle: Firmware device handle
+ *
+ * Context: This function will acquire ioc->pcie_device_lock and will release
+ * before returning the pcie_device object.
+ *
+ * This searches for pcie_device based on handle, then return pcie_device
+ * object.
+ */
+struct _pcie_device *
+mpt3sas_get_pdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _pcie_device *pcie_device;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	pcie_device = __mpt3sas_get_pdev_by_handle(ioc, handle);
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+	return pcie_device;
+}
+
+/**
+ * _scsih_set_nvme_max_shutdown_latency - Update max_shutdown_latency.
+ * @ioc: per adapter object
+ * Context: This function will acquire ioc->pcie_device_lock
+ *
+ * Update ioc->max_shutdown_latency to that NVMe drives RTD3 Entry Latency
+ * which has reported maximum among all available NVMe drives.
+ * Minimum max_shutdown_latency will be six seconds.
+ */
+static void
+_scsih_set_nvme_max_shutdown_latency(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct _pcie_device *pcie_device;
+	unsigned long flags;
+	u16 shutdown_latency = IO_UNIT_CONTROL_SHUTDOWN_TIMEOUT;
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	list_for_each_entry(pcie_device, &ioc->pcie_device_list, list) {
+		if (pcie_device->shutdown_latency) {
+			if (shutdown_latency < pcie_device->shutdown_latency)
+				shutdown_latency =
+					pcie_device->shutdown_latency;
+		}
+	}
+	ioc->max_shutdown_latency = shutdown_latency;
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+}
+
+/**
+ * _scsih_pcie_device_remove - remove pcie_device from list.
+ * @ioc: per adapter object
+ * @pcie_device: the pcie_device object
+ * Context: This function will acquire ioc->pcie_device_lock.
+ *
+ * If pcie_device is on the list, remove it and decrement its reference count.
+ */
+static void
+_scsih_pcie_device_remove(struct MPT3SAS_ADAPTER *ioc,
+	struct _pcie_device *pcie_device)
+{
+	unsigned long flags;
+	int was_on_pcie_device_list = 0;
+	u8 update_latency = 0;
+
+	if (!pcie_device)
+		return;
+	ioc_info(ioc, "removing handle(0x%04x), wwid(0x%016llx)\n",
+		 pcie_device->handle, (u64)pcie_device->wwid);
+	if (pcie_device->enclosure_handle != 0)
+		ioc_info(ioc, "removing enclosure logical id(0x%016llx), slot(%d)\n",
+			 (u64)pcie_device->enclosure_logical_id,
+			 pcie_device->slot);
+	if (pcie_device->connector_name[0] != '\0')
+		ioc_info(ioc, "removing enclosure level(0x%04x), connector name( %s)\n",
+			 pcie_device->enclosure_level,
+			 pcie_device->connector_name);
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	if (!list_empty(&pcie_device->list)) {
+		list_del_init(&pcie_device->list);
+		was_on_pcie_device_list = 1;
+	}
+	if (pcie_device->shutdown_latency == ioc->max_shutdown_latency)
+		update_latency = 1;
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+	if (was_on_pcie_device_list) {
+		kfree(pcie_device->serial_number);
+		pcie_device_put(pcie_device);
+	}
+
+	/*
+	 * This device's RTD3 Entry Latency matches IOC's
+	 * max_shutdown_latency. Recalculate IOC's max_shutdown_latency
+	 * from the available drives as current drive is getting removed.
+	 */
+	if (update_latency)
+		_scsih_set_nvme_max_shutdown_latency(ioc);
+}
+
+
+/**
+ * _scsih_pcie_device_remove_by_handle - removing pcie device object by handle
+ * @ioc: per adapter object
+ * @handle: device handle
+ */
+static void
+_scsih_pcie_device_remove_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _pcie_device *pcie_device;
+	unsigned long flags;
+	int was_on_pcie_device_list = 0;
+	u8 update_latency = 0;
+
+	if (ioc->shost_recovery)
+		return;
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	pcie_device = __mpt3sas_get_pdev_by_handle(ioc, handle);
+	if (pcie_device) {
+		if (!list_empty(&pcie_device->list)) {
+			list_del_init(&pcie_device->list);
+			was_on_pcie_device_list = 1;
+			pcie_device_put(pcie_device);
+		}
+		if (pcie_device->shutdown_latency == ioc->max_shutdown_latency)
+			update_latency = 1;
+	}
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+	if (was_on_pcie_device_list) {
+		_scsih_pcie_device_remove_from_sml(ioc, pcie_device);
+		pcie_device_put(pcie_device);
+	}
+
+	/*
+	 * This device's RTD3 Entry Latency matches IOC's
+	 * max_shutdown_latency. Recalculate IOC's max_shutdown_latency
+	 * from the available drives as current drive is getting removed.
+	 */
+	if (update_latency)
+		_scsih_set_nvme_max_shutdown_latency(ioc);
+}
+
+/**
+ * _scsih_pcie_device_add - add pcie_device object
+ * @ioc: per adapter object
+ * @pcie_device: pcie_device object
+ *
+ * This is added to the pcie_device_list link list.
+ */
+static void
+_scsih_pcie_device_add(struct MPT3SAS_ADAPTER *ioc,
+	struct _pcie_device *pcie_device)
+{
+	unsigned long flags;
+
+	dewtprintk(ioc,
+		   ioc_info(ioc, "%s: handle (0x%04x), wwid(0x%016llx)\n",
+			    __func__,
+			    pcie_device->handle, (u64)pcie_device->wwid));
+	if (pcie_device->enclosure_handle != 0)
+		dewtprintk(ioc,
+			   ioc_info(ioc, "%s: enclosure logical id(0x%016llx), slot( %d)\n",
+				    __func__,
+				    (u64)pcie_device->enclosure_logical_id,
+				    pcie_device->slot));
+	if (pcie_device->connector_name[0] != '\0')
+		dewtprintk(ioc,
+			   ioc_info(ioc, "%s: enclosure level(0x%04x), connector name( %s)\n",
+				    __func__, pcie_device->enclosure_level,
+				    pcie_device->connector_name));
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	pcie_device_get(pcie_device);
+	list_add_tail(&pcie_device->list, &ioc->pcie_device_list);
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+	if (pcie_device->access_status ==
+	    MPI26_PCIEDEV0_ASTATUS_DEVICE_BLOCKED) {
+		clear_bit(pcie_device->handle, ioc->pend_os_device_add);
+		return;
+	}
+	if (scsi_add_device(ioc->shost, PCIE_CHANNEL, pcie_device->id, 0)) {
+		_scsih_pcie_device_remove(ioc, pcie_device);
+	} else if (!pcie_device->starget) {
+		if (!ioc->is_driver_loading) {
+/*TODO-- Need to find out whether this condition will occur or not*/
+			clear_bit(pcie_device->handle, ioc->pend_os_device_add);
+		}
+	} else
+		clear_bit(pcie_device->handle, ioc->pend_os_device_add);
+}
+
+/*
+ * _scsih_pcie_device_init_add - insert pcie_device to the init list.
+ * @ioc: per adapter object
+ * @pcie_device: the pcie_device object
+ * Context: This function will acquire ioc->pcie_device_lock.
+ *
+ * Adding new object at driver load time to the ioc->pcie_device_init_list.
+ */
+static void
+_scsih_pcie_device_init_add(struct MPT3SAS_ADAPTER *ioc,
+				struct _pcie_device *pcie_device)
+{
+	unsigned long flags;
+
+	dewtprintk(ioc,
+		   ioc_info(ioc, "%s: handle (0x%04x), wwid(0x%016llx)\n",
+			    __func__,
+			    pcie_device->handle, (u64)pcie_device->wwid));
+	if (pcie_device->enclosure_handle != 0)
+		dewtprintk(ioc,
+			   ioc_info(ioc, "%s: enclosure logical id(0x%016llx), slot( %d)\n",
+				    __func__,
+				    (u64)pcie_device->enclosure_logical_id,
+				    pcie_device->slot));
+	if (pcie_device->connector_name[0] != '\0')
+		dewtprintk(ioc,
+			   ioc_info(ioc, "%s: enclosure level(0x%04x), connector name( %s)\n",
+				    __func__, pcie_device->enclosure_level,
+				    pcie_device->connector_name));
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	pcie_device_get(pcie_device);
+	list_add_tail(&pcie_device->list, &ioc->pcie_device_init_list);
+	if (pcie_device->access_status !=
+	    MPI26_PCIEDEV0_ASTATUS_DEVICE_BLOCKED)
+		_scsih_determine_boot_device(ioc, pcie_device, PCIE_CHANNEL);
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+}
+/**
+ * _scsih_raid_device_find_by_id - raid device search
+ * @ioc: per adapter object
+ * @id: sas device target id
+ * @channel: sas device channel
+ * Context: Calling function should acquire ioc->raid_device_lock
+ *
+ * This searches for raid_device based on target id, then return raid_device
+ * object.
+ */
+static struct _raid_device *
+_scsih_raid_device_find_by_id(struct MPT3SAS_ADAPTER *ioc, int id, int channel)
+{
+	struct _raid_device *raid_device, *r;
+
+	r = NULL;
+	list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
+		if (raid_device->id == id && raid_device->channel == channel) {
+			r = raid_device;
+			goto out;
+		}
+	}
+
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_raid_device_find_by_handle - raid device search
+ * @ioc: per adapter object
+ * @handle: sas device handle (assigned by firmware)
+ * Context: Calling function should acquire ioc->raid_device_lock
+ *
+ * This searches for raid_device based on handle, then return raid_device
+ * object.
+ */
+struct _raid_device *
+mpt3sas_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _raid_device *raid_device, *r;
+
+	r = NULL;
+	list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
+		if (raid_device->handle != handle)
+			continue;
+		r = raid_device;
+		goto out;
+	}
+
+ out:
+	return r;
+}
+
+/**
+ * _scsih_raid_device_find_by_wwid - raid device search
+ * @ioc: per adapter object
+ * @wwid: ?
+ * Context: Calling function should acquire ioc->raid_device_lock
+ *
+ * This searches for raid_device based on wwid, then return raid_device
+ * object.
+ */
+static struct _raid_device *
+_scsih_raid_device_find_by_wwid(struct MPT3SAS_ADAPTER *ioc, u64 wwid)
+{
+	struct _raid_device *raid_device, *r;
+
+	r = NULL;
+	list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
+		if (raid_device->wwid != wwid)
+			continue;
+		r = raid_device;
+		goto out;
+	}
+
+ out:
+	return r;
+}
+
+/**
+ * _scsih_raid_device_add - add raid_device object
+ * @ioc: per adapter object
+ * @raid_device: raid_device object
+ *
+ * This is added to the raid_device_list link list.
+ */
+static void
+_scsih_raid_device_add(struct MPT3SAS_ADAPTER *ioc,
+	struct _raid_device *raid_device)
+{
+	unsigned long flags;
+
+	dewtprintk(ioc,
+		   ioc_info(ioc, "%s: handle(0x%04x), wwid(0x%016llx)\n",
+			    __func__,
+			    raid_device->handle, (u64)raid_device->wwid));
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	list_add_tail(&raid_device->list, &ioc->raid_device_list);
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+}
+
+/**
+ * _scsih_raid_device_remove - delete raid_device object
+ * @ioc: per adapter object
+ * @raid_device: raid_device object
+ *
+ */
+static void
+_scsih_raid_device_remove(struct MPT3SAS_ADAPTER *ioc,
+	struct _raid_device *raid_device)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	list_del(&raid_device->list);
+	kfree(raid_device);
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+}
+
+/**
+ * mpt3sas_scsih_expander_find_by_handle - expander device search
+ * @ioc: per adapter object
+ * @handle: expander handle (assigned by firmware)
+ * Context: Calling function should acquire ioc->sas_device_lock
+ *
+ * This searches for expander device based on handle, then returns the
+ * sas_node object.
+ */
+struct _sas_node *
+mpt3sas_scsih_expander_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _sas_node *sas_expander, *r;
+
+	r = NULL;
+	list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
+		if (sas_expander->handle != handle)
+			continue;
+		r = sas_expander;
+		goto out;
+	}
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_scsih_enclosure_find_by_handle - exclosure device search
+ * @ioc: per adapter object
+ * @handle: enclosure handle (assigned by firmware)
+ * Context: Calling function should acquire ioc->sas_device_lock
+ *
+ * This searches for enclosure device based on handle, then returns the
+ * enclosure object.
+ */
+static struct _enclosure_node *
+mpt3sas_scsih_enclosure_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _enclosure_node *enclosure_dev, *r;
+
+	r = NULL;
+	list_for_each_entry(enclosure_dev, &ioc->enclosure_list, list) {
+		if (le16_to_cpu(enclosure_dev->pg0.EnclosureHandle) != handle)
+			continue;
+		r = enclosure_dev;
+		goto out;
+	}
+out:
+	return r;
+}
+/**
+ * mpt3sas_scsih_expander_find_by_sas_address - expander device search
+ * @ioc: per adapter object
+ * @sas_address: sas address
+ * @port: hba port entry
+ * Context: Calling function should acquire ioc->sas_node_lock.
+ *
+ * This searches for expander device based on sas_address & port number,
+ * then returns the sas_node object.
+ */
+struct _sas_node *
+mpt3sas_scsih_expander_find_by_sas_address(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address, struct hba_port *port)
+{
+	struct _sas_node *sas_expander, *r = NULL;
+
+	if (!port)
+		return r;
+
+	list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
+		if (sas_expander->sas_address != sas_address)
+			continue;
+		if (sas_expander->port != port)
+			continue;
+		r = sas_expander;
+		goto out;
+	}
+ out:
+	return r;
+}
+
+/**
+ * _scsih_expander_node_add - insert expander device to the list.
+ * @ioc: per adapter object
+ * @sas_expander: the sas_device object
+ * Context: This function will acquire ioc->sas_node_lock.
+ *
+ * Adding new object to the ioc->sas_expander_list.
+ */
+static void
+_scsih_expander_node_add(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_expander)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	list_add_tail(&sas_expander->list, &ioc->sas_expander_list);
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+}
+
+/**
+ * _scsih_is_end_device - determines if device is an end device
+ * @device_info: bitfield providing information about the device.
+ * Context: none
+ *
+ * Return: 1 if end device.
+ */
+static int
+_scsih_is_end_device(u32 device_info)
+{
+	if (device_info & MPI2_SAS_DEVICE_INFO_END_DEVICE &&
+		((device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) |
+		(device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) |
+		(device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)))
+		return 1;
+	else
+		return 0;
+}
+
+/**
+ * _scsih_is_nvme_pciescsi_device - determines if
+ *			device is an pcie nvme/scsi device
+ * @device_info: bitfield providing information about the device.
+ * Context: none
+ *
+ * Returns 1 if device is pcie device type nvme/scsi.
+ */
+static int
+_scsih_is_nvme_pciescsi_device(u32 device_info)
+{
+	if (((device_info & MPI26_PCIE_DEVINFO_MASK_DEVICE_TYPE)
+	    == MPI26_PCIE_DEVINFO_NVME) ||
+	    ((device_info & MPI26_PCIE_DEVINFO_MASK_DEVICE_TYPE)
+	    == MPI26_PCIE_DEVINFO_SCSI))
+		return 1;
+	else
+		return 0;
+}
+
+/**
+ * _scsih_scsi_lookup_find_by_target - search for matching channel:id
+ * @ioc: per adapter object
+ * @id: target id
+ * @channel: channel
+ * Context: This function will acquire ioc->scsi_lookup_lock.
+ *
+ * This will search for a matching channel:id in the scsi_lookup array,
+ * returning 1 if found.
+ */
+static u8
+_scsih_scsi_lookup_find_by_target(struct MPT3SAS_ADAPTER *ioc, int id,
+	int channel)
+{
+	int smid;
+	struct scsi_cmnd *scmd;
+
+	for (smid = 1;
+	     smid <= ioc->shost->can_queue; smid++) {
+		scmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid);
+		if (!scmd)
+			continue;
+		if (scmd->device->id == id &&
+		    scmd->device->channel == channel)
+			return 1;
+	}
+	return 0;
+}
+
+/**
+ * _scsih_scsi_lookup_find_by_lun - search for matching channel:id:lun
+ * @ioc: per adapter object
+ * @id: target id
+ * @lun: lun number
+ * @channel: channel
+ * Context: This function will acquire ioc->scsi_lookup_lock.
+ *
+ * This will search for a matching channel:id:lun in the scsi_lookup array,
+ * returning 1 if found.
+ */
+static u8
+_scsih_scsi_lookup_find_by_lun(struct MPT3SAS_ADAPTER *ioc, int id,
+	unsigned int lun, int channel)
+{
+	int smid;
+	struct scsi_cmnd *scmd;
+
+	for (smid = 1; smid <= ioc->shost->can_queue; smid++) {
+
+		scmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid);
+		if (!scmd)
+			continue;
+		if (scmd->device->id == id &&
+		    scmd->device->channel == channel &&
+		    scmd->device->lun == lun)
+			return 1;
+	}
+	return 0;
+}
+
+/**
+ * mpt3sas_scsih_scsi_lookup_get - returns scmd entry
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return: the smid stored scmd pointer.
+ * Then will dereference the stored scmd pointer.
+ */
+struct scsi_cmnd *
+mpt3sas_scsih_scsi_lookup_get(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	struct scsi_cmnd *scmd = NULL;
+	struct scsiio_tracker *st;
+	Mpi25SCSIIORequest_t *mpi_request;
+	u16 tag = smid - 1;
+
+	if (smid > 0  &&
+	    smid <= ioc->scsiio_depth - INTERNAL_SCSIIO_CMDS_COUNT) {
+		u32 unique_tag =
+		    ioc->io_queue_num[tag] << BLK_MQ_UNIQUE_TAG_BITS | tag;
+
+		mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+
+		/*
+		 * If SCSI IO request is outstanding at driver level then
+		 * DevHandle filed must be non-zero. If DevHandle is zero
+		 * then it means that this smid is free at driver level,
+		 * so return NULL.
+		 */
+		if (!mpi_request->DevHandle)
+			return scmd;
+
+		scmd = scsi_host_find_tag(ioc->shost, unique_tag);
+		if (scmd) {
+			st = scsi_cmd_priv(scmd);
+			if (st->cb_idx == 0xFF || st->smid == 0)
+				scmd = NULL;
+		}
+	}
+	return scmd;
+}
+
+/**
+ * scsih_change_queue_depth - setting device queue depth
+ * @sdev: scsi device struct
+ * @qdepth: requested queue depth
+ *
+ * Return: queue depth.
+ */
+static int
+scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
+{
+	struct Scsi_Host *shost = sdev->host;
+	int max_depth;
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct _sas_device *sas_device;
+	unsigned long flags;
+
+	max_depth = shost->can_queue;
+
+	/*
+	 * limit max device queue for SATA to 32 if enable_sdev_max_qd
+	 * is disabled.
+	 */
+	if (ioc->enable_sdev_max_qd || ioc->is_gen35_ioc)
+		goto not_sata;
+
+	sas_device_priv_data = sdev->hostdata;
+	if (!sas_device_priv_data)
+		goto not_sata;
+	sas_target_priv_data = sas_device_priv_data->sas_target;
+	if (!sas_target_priv_data)
+		goto not_sata;
+	if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))
+		goto not_sata;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_from_target(ioc, sas_target_priv_data);
+	if (sas_device) {
+		if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
+			max_depth = MPT3SAS_SATA_QUEUE_DEPTH;
+
+		sas_device_put(sas_device);
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ not_sata:
+
+	if (!sdev->tagged_supported)
+		max_depth = 1;
+	if (qdepth > max_depth)
+		qdepth = max_depth;
+	scsi_change_queue_depth(sdev, qdepth);
+	sdev_printk(KERN_INFO, sdev,
+	    "qdepth(%d), tagged(%d), scsi_level(%d), cmd_que(%d)\n",
+	    sdev->queue_depth, sdev->tagged_supported,
+	    sdev->scsi_level, ((sdev->inquiry[7] & 2) >> 1));
+	return sdev->queue_depth;
+}
+
+/**
+ * mpt3sas_scsih_change_queue_depth - setting device queue depth
+ * @sdev: scsi device struct
+ * @qdepth: requested queue depth
+ *
+ * Returns nothing.
+ */
+void
+mpt3sas_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
+{
+	struct Scsi_Host *shost = sdev->host;
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	if (ioc->enable_sdev_max_qd)
+		qdepth = shost->can_queue;
+
+	scsih_change_queue_depth(sdev, qdepth);
+}
+
+/**
+ * scsih_target_alloc - target add routine
+ * @starget: scsi target struct
+ *
+ * Return: 0 if ok. Any other return is assumed to be an error and
+ * the device is ignored.
+ */
+static int
+scsih_target_alloc(struct scsi_target *starget)
+{
+	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct _sas_device *sas_device;
+	struct _raid_device *raid_device;
+	struct _pcie_device *pcie_device;
+	unsigned long flags;
+	struct sas_rphy *rphy;
+
+	sas_target_priv_data = kzalloc(sizeof(*sas_target_priv_data),
+				       GFP_KERNEL);
+	if (!sas_target_priv_data)
+		return -ENOMEM;
+
+	starget->hostdata = sas_target_priv_data;
+	sas_target_priv_data->starget = starget;
+	sas_target_priv_data->handle = MPT3SAS_INVALID_DEVICE_HANDLE;
+
+	/* RAID volumes */
+	if (starget->channel == RAID_CHANNEL) {
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		raid_device = _scsih_raid_device_find_by_id(ioc, starget->id,
+		    starget->channel);
+		if (raid_device) {
+			sas_target_priv_data->handle = raid_device->handle;
+			sas_target_priv_data->sas_address = raid_device->wwid;
+			sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME;
+			if (ioc->is_warpdrive)
+				sas_target_priv_data->raid_device = raid_device;
+			raid_device->starget = starget;
+		}
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+		return 0;
+	}
+
+	/* PCIe devices */
+	if (starget->channel == PCIE_CHANNEL) {
+		spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+		pcie_device = __mpt3sas_get_pdev_by_idchannel(ioc, starget->id,
+			starget->channel);
+		if (pcie_device) {
+			sas_target_priv_data->handle = pcie_device->handle;
+			sas_target_priv_data->sas_address = pcie_device->wwid;
+			sas_target_priv_data->port = NULL;
+			sas_target_priv_data->pcie_dev = pcie_device;
+			pcie_device->starget = starget;
+			pcie_device->id = starget->id;
+			pcie_device->channel = starget->channel;
+			sas_target_priv_data->flags |=
+				MPT_TARGET_FLAGS_PCIE_DEVICE;
+			if (pcie_device->fast_path)
+				sas_target_priv_data->flags |=
+					MPT_TARGET_FASTPATH_IO;
+		}
+		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+		return 0;
+	}
+
+	/* sas/sata devices */
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	rphy = dev_to_rphy(starget->dev.parent);
+	sas_device = __mpt3sas_get_sdev_by_rphy(ioc, rphy);
+
+	if (sas_device) {
+		sas_target_priv_data->handle = sas_device->handle;
+		sas_target_priv_data->sas_address = sas_device->sas_address;
+		sas_target_priv_data->port = sas_device->port;
+		sas_target_priv_data->sas_dev = sas_device;
+		sas_device->starget = starget;
+		sas_device->id = starget->id;
+		sas_device->channel = starget->channel;
+		if (test_bit(sas_device->handle, ioc->pd_handles))
+			sas_target_priv_data->flags |=
+			    MPT_TARGET_FLAGS_RAID_COMPONENT;
+		if (sas_device->fast_path)
+			sas_target_priv_data->flags |=
+					MPT_TARGET_FASTPATH_IO;
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	return 0;
+}
+
+/**
+ * scsih_target_destroy - target destroy routine
+ * @starget: scsi target struct
+ */
+static void
+scsih_target_destroy(struct scsi_target *starget)
+{
+	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct _sas_device *sas_device;
+	struct _raid_device *raid_device;
+	struct _pcie_device *pcie_device;
+	unsigned long flags;
+
+	sas_target_priv_data = starget->hostdata;
+	if (!sas_target_priv_data)
+		return;
+
+	if (starget->channel == RAID_CHANNEL) {
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		raid_device = _scsih_raid_device_find_by_id(ioc, starget->id,
+		    starget->channel);
+		if (raid_device) {
+			raid_device->starget = NULL;
+			raid_device->sdev = NULL;
+		}
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+		goto out;
+	}
+
+	if (starget->channel == PCIE_CHANNEL) {
+		spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+		pcie_device = __mpt3sas_get_pdev_from_target(ioc,
+							sas_target_priv_data);
+		if (pcie_device && (pcie_device->starget == starget) &&
+			(pcie_device->id == starget->id) &&
+			(pcie_device->channel == starget->channel))
+			pcie_device->starget = NULL;
+
+		if (pcie_device) {
+			/*
+			 * Corresponding get() is in _scsih_target_alloc()
+			 */
+			sas_target_priv_data->pcie_dev = NULL;
+			pcie_device_put(pcie_device);
+			pcie_device_put(pcie_device);
+		}
+		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+		goto out;
+	}
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_from_target(ioc, sas_target_priv_data);
+	if (sas_device && (sas_device->starget == starget) &&
+	    (sas_device->id == starget->id) &&
+	    (sas_device->channel == starget->channel))
+		sas_device->starget = NULL;
+
+	if (sas_device) {
+		/*
+		 * Corresponding get() is in _scsih_target_alloc()
+		 */
+		sas_target_priv_data->sas_dev = NULL;
+		sas_device_put(sas_device);
+
+		sas_device_put(sas_device);
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ out:
+	kfree(sas_target_priv_data);
+	starget->hostdata = NULL;
+}
+
+/**
+ * scsih_slave_alloc - device add routine
+ * @sdev: scsi device struct
+ *
+ * Return: 0 if ok. Any other return is assumed to be an error and
+ * the device is ignored.
+ */
+static int
+scsih_slave_alloc(struct scsi_device *sdev)
+{
+	struct Scsi_Host *shost;
+	struct MPT3SAS_ADAPTER *ioc;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_target *starget;
+	struct _raid_device *raid_device;
+	struct _sas_device *sas_device;
+	struct _pcie_device *pcie_device;
+	unsigned long flags;
+
+	sas_device_priv_data = kzalloc(sizeof(*sas_device_priv_data),
+				       GFP_KERNEL);
+	if (!sas_device_priv_data)
+		return -ENOMEM;
+
+	sas_device_priv_data->lun = sdev->lun;
+	sas_device_priv_data->flags = MPT_DEVICE_FLAGS_INIT;
+
+	starget = scsi_target(sdev);
+	sas_target_priv_data = starget->hostdata;
+	sas_target_priv_data->num_luns++;
+	sas_device_priv_data->sas_target = sas_target_priv_data;
+	sdev->hostdata = sas_device_priv_data;
+	if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT))
+		sdev->no_uld_attach = 1;
+
+	shost = dev_to_shost(&starget->dev);
+	ioc = shost_priv(shost);
+	if (starget->channel == RAID_CHANNEL) {
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		raid_device = _scsih_raid_device_find_by_id(ioc,
+		    starget->id, starget->channel);
+		if (raid_device)
+			raid_device->sdev = sdev; /* raid is single lun */
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+	}
+	if (starget->channel == PCIE_CHANNEL) {
+		spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+		pcie_device = __mpt3sas_get_pdev_by_wwid(ioc,
+				sas_target_priv_data->sas_address);
+		if (pcie_device && (pcie_device->starget == NULL)) {
+			sdev_printk(KERN_INFO, sdev,
+			    "%s : pcie_device->starget set to starget @ %d\n",
+			    __func__, __LINE__);
+			pcie_device->starget = starget;
+		}
+
+		if (pcie_device)
+			pcie_device_put(pcie_device);
+		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+	} else  if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		sas_device = __mpt3sas_get_sdev_by_addr(ioc,
+		    sas_target_priv_data->sas_address,
+		    sas_target_priv_data->port);
+		if (sas_device && (sas_device->starget == NULL)) {
+			sdev_printk(KERN_INFO, sdev,
+			"%s : sas_device->starget set to starget @ %d\n",
+			     __func__, __LINE__);
+			sas_device->starget = starget;
+		}
+
+		if (sas_device)
+			sas_device_put(sas_device);
+
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	}
+
+	return 0;
+}
+
+/**
+ * scsih_slave_destroy - device destroy routine
+ * @sdev: scsi device struct
+ */
+static void
+scsih_slave_destroy(struct scsi_device *sdev)
+{
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct scsi_target *starget;
+	struct Scsi_Host *shost;
+	struct MPT3SAS_ADAPTER *ioc;
+	struct _sas_device *sas_device;
+	struct _pcie_device *pcie_device;
+	unsigned long flags;
+
+	if (!sdev->hostdata)
+		return;
+
+	starget = scsi_target(sdev);
+	sas_target_priv_data = starget->hostdata;
+	sas_target_priv_data->num_luns--;
+
+	shost = dev_to_shost(&starget->dev);
+	ioc = shost_priv(shost);
+
+	if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_PCIE_DEVICE) {
+		spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+		pcie_device = __mpt3sas_get_pdev_from_target(ioc,
+				sas_target_priv_data);
+		if (pcie_device && !sas_target_priv_data->num_luns)
+			pcie_device->starget = NULL;
+
+		if (pcie_device)
+			pcie_device_put(pcie_device);
+
+		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+	} else if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		sas_device = __mpt3sas_get_sdev_from_target(ioc,
+				sas_target_priv_data);
+		if (sas_device && !sas_target_priv_data->num_luns)
+			sas_device->starget = NULL;
+
+		if (sas_device)
+			sas_device_put(sas_device);
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	}
+
+	kfree(sdev->hostdata);
+	sdev->hostdata = NULL;
+}
+
+/**
+ * _scsih_display_sata_capabilities - sata capabilities
+ * @ioc: per adapter object
+ * @handle: device handle
+ * @sdev: scsi device struct
+ */
+static void
+_scsih_display_sata_capabilities(struct MPT3SAS_ADAPTER *ioc,
+	u16 handle, struct scsi_device *sdev)
+{
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	u32 ioc_status;
+	u16 flags;
+	u32 device_info;
+
+	if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return;
+	}
+
+	flags = le16_to_cpu(sas_device_pg0.Flags);
+	device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
+
+	sdev_printk(KERN_INFO, sdev,
+	    "atapi(%s), ncq(%s), asyn_notify(%s), smart(%s), fua(%s), "
+	    "sw_preserve(%s)\n",
+	    (device_info & MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE) ? "y" : "n",
+	    (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED) ? "y" : "n",
+	    (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY) ? "y" :
+	    "n",
+	    (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED) ? "y" : "n",
+	    (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED) ? "y" : "n",
+	    (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE) ? "y" : "n");
+}
+
+/*
+ * raid transport support -
+ * Enabled for SLES11 and newer, in older kernels the driver will panic when
+ * unloading the driver followed by a load - I believe that the subroutine
+ * raid_class_release() is not cleaning up properly.
+ */
+
+/**
+ * scsih_is_raid - return boolean indicating device is raid volume
+ * @dev: the device struct object
+ */
+static int
+scsih_is_raid(struct device *dev)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(sdev->host);
+
+	if (ioc->is_warpdrive)
+		return 0;
+	return (sdev->channel == RAID_CHANNEL) ? 1 : 0;
+}
+
+static int
+scsih_is_nvme(struct device *dev)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+
+	return (sdev->channel == PCIE_CHANNEL) ? 1 : 0;
+}
+
+/**
+ * scsih_get_resync - get raid volume resync percent complete
+ * @dev: the device struct object
+ */
+static void
+scsih_get_resync(struct device *dev)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(sdev->host);
+	static struct _raid_device *raid_device;
+	unsigned long flags;
+	Mpi2RaidVolPage0_t vol_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u32 volume_status_flags;
+	u8 percent_complete;
+	u16 handle;
+
+	percent_complete = 0;
+	handle = 0;
+	if (ioc->is_warpdrive)
+		goto out;
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
+	    sdev->channel);
+	if (raid_device) {
+		handle = raid_device->handle;
+		percent_complete = raid_device->percent_complete;
+	}
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+
+	if (!handle)
+		goto out;
+
+	if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0,
+	     MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
+	     sizeof(Mpi2RaidVolPage0_t))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		percent_complete = 0;
+		goto out;
+	}
+
+	volume_status_flags = le32_to_cpu(vol_pg0.VolumeStatusFlags);
+	if (!(volume_status_flags &
+	    MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS))
+		percent_complete = 0;
+
+ out:
+
+	switch (ioc->hba_mpi_version_belonged) {
+	case MPI2_VERSION:
+		raid_set_resync(mpt2sas_raid_template, dev, percent_complete);
+		break;
+	case MPI25_VERSION:
+	case MPI26_VERSION:
+		raid_set_resync(mpt3sas_raid_template, dev, percent_complete);
+		break;
+	}
+}
+
+/**
+ * scsih_get_state - get raid volume level
+ * @dev: the device struct object
+ */
+static void
+scsih_get_state(struct device *dev)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(sdev->host);
+	static struct _raid_device *raid_device;
+	unsigned long flags;
+	Mpi2RaidVolPage0_t vol_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u32 volstate;
+	enum raid_state state = RAID_STATE_UNKNOWN;
+	u16 handle = 0;
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
+	    sdev->channel);
+	if (raid_device)
+		handle = raid_device->handle;
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+
+	if (!raid_device)
+		goto out;
+
+	if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0,
+	     MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
+	     sizeof(Mpi2RaidVolPage0_t))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		goto out;
+	}
+
+	volstate = le32_to_cpu(vol_pg0.VolumeStatusFlags);
+	if (volstate & MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS) {
+		state = RAID_STATE_RESYNCING;
+		goto out;
+	}
+
+	switch (vol_pg0.VolumeState) {
+	case MPI2_RAID_VOL_STATE_OPTIMAL:
+	case MPI2_RAID_VOL_STATE_ONLINE:
+		state = RAID_STATE_ACTIVE;
+		break;
+	case  MPI2_RAID_VOL_STATE_DEGRADED:
+		state = RAID_STATE_DEGRADED;
+		break;
+	case MPI2_RAID_VOL_STATE_FAILED:
+	case MPI2_RAID_VOL_STATE_MISSING:
+		state = RAID_STATE_OFFLINE;
+		break;
+	}
+ out:
+	switch (ioc->hba_mpi_version_belonged) {
+	case MPI2_VERSION:
+		raid_set_state(mpt2sas_raid_template, dev, state);
+		break;
+	case MPI25_VERSION:
+	case MPI26_VERSION:
+		raid_set_state(mpt3sas_raid_template, dev, state);
+		break;
+	}
+}
+
+/**
+ * _scsih_set_level - set raid level
+ * @ioc: ?
+ * @sdev: scsi device struct
+ * @volume_type: volume type
+ */
+static void
+_scsih_set_level(struct MPT3SAS_ADAPTER *ioc,
+	struct scsi_device *sdev, u8 volume_type)
+{
+	enum raid_level level = RAID_LEVEL_UNKNOWN;
+
+	switch (volume_type) {
+	case MPI2_RAID_VOL_TYPE_RAID0:
+		level = RAID_LEVEL_0;
+		break;
+	case MPI2_RAID_VOL_TYPE_RAID10:
+		level = RAID_LEVEL_10;
+		break;
+	case MPI2_RAID_VOL_TYPE_RAID1E:
+		level = RAID_LEVEL_1E;
+		break;
+	case MPI2_RAID_VOL_TYPE_RAID1:
+		level = RAID_LEVEL_1;
+		break;
+	}
+
+	switch (ioc->hba_mpi_version_belonged) {
+	case MPI2_VERSION:
+		raid_set_level(mpt2sas_raid_template,
+			&sdev->sdev_gendev, level);
+		break;
+	case MPI25_VERSION:
+	case MPI26_VERSION:
+		raid_set_level(mpt3sas_raid_template,
+			&sdev->sdev_gendev, level);
+		break;
+	}
+}
+
+
+/**
+ * _scsih_get_volume_capabilities - volume capabilities
+ * @ioc: per adapter object
+ * @raid_device: the raid_device object
+ *
+ * Return: 0 for success, else 1
+ */
+static int
+_scsih_get_volume_capabilities(struct MPT3SAS_ADAPTER *ioc,
+	struct _raid_device *raid_device)
+{
+	Mpi2RaidVolPage0_t *vol_pg0;
+	Mpi2RaidPhysDiskPage0_t pd_pg0;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 sz;
+	u8 num_pds;
+
+	if ((mpt3sas_config_get_number_pds(ioc, raid_device->handle,
+	    &num_pds)) || !num_pds) {
+		dfailprintk(ioc,
+			    ioc_warn(ioc, "failure at %s:%d/%s()!\n",
+				     __FILE__, __LINE__, __func__));
+		return 1;
+	}
+
+	raid_device->num_pds = num_pds;
+	sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
+	    sizeof(Mpi2RaidVol0PhysDisk_t));
+	vol_pg0 = kzalloc(sz, GFP_KERNEL);
+	if (!vol_pg0) {
+		dfailprintk(ioc,
+			    ioc_warn(ioc, "failure at %s:%d/%s()!\n",
+				     __FILE__, __LINE__, __func__));
+		return 1;
+	}
+
+	if ((mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
+	     MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
+		dfailprintk(ioc,
+			    ioc_warn(ioc, "failure at %s:%d/%s()!\n",
+				     __FILE__, __LINE__, __func__));
+		kfree(vol_pg0);
+		return 1;
+	}
+
+	raid_device->volume_type = vol_pg0->VolumeType;
+
+	/* figure out what the underlying devices are by
+	 * obtaining the device_info bits for the 1st device
+	 */
+	if (!(mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
+	    &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM,
+	    vol_pg0->PhysDisk[0].PhysDiskNum))) {
+		if (!(mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+		    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
+		    le16_to_cpu(pd_pg0.DevHandle)))) {
+			raid_device->device_info =
+			    le32_to_cpu(sas_device_pg0.DeviceInfo);
+		}
+	}
+
+	kfree(vol_pg0);
+	return 0;
+}
+
+/**
+ * _scsih_enable_tlr - setting TLR flags
+ * @ioc: per adapter object
+ * @sdev: scsi device struct
+ *
+ * Enabling Transaction Layer Retries for tape devices when
+ * vpd page 0x90 is present
+ *
+ */
+static void
+_scsih_enable_tlr(struct MPT3SAS_ADAPTER *ioc, struct scsi_device *sdev)
+{
+
+	/* only for TAPE */
+	if (sdev->type != TYPE_TAPE)
+		return;
+
+	if (!(ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR))
+		return;
+
+	sas_enable_tlr(sdev);
+	sdev_printk(KERN_INFO, sdev, "TLR %s\n",
+	    sas_is_tlr_enabled(sdev) ? "Enabled" : "Disabled");
+	return;
+
+}
+
+/**
+ * scsih_slave_configure - device configure routine.
+ * @sdev: scsi device struct
+ *
+ * Return: 0 if ok. Any other return is assumed to be an error and
+ * the device is ignored.
+ */
+static int
+scsih_slave_configure(struct scsi_device *sdev)
+{
+	struct Scsi_Host *shost = sdev->host;
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct _sas_device *sas_device;
+	struct _pcie_device *pcie_device;
+	struct _raid_device *raid_device;
+	unsigned long flags;
+	int qdepth;
+	u8 ssp_target = 0;
+	char *ds = "";
+	char *r_level = "";
+	u16 handle, volume_handle = 0;
+	u64 volume_wwid = 0;
+
+	qdepth = 1;
+	sas_device_priv_data = sdev->hostdata;
+	sas_device_priv_data->configured_lun = 1;
+	sas_device_priv_data->flags &= ~MPT_DEVICE_FLAGS_INIT;
+	sas_target_priv_data = sas_device_priv_data->sas_target;
+	handle = sas_target_priv_data->handle;
+
+	/* raid volume handling */
+	if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME) {
+
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+		if (!raid_device) {
+			dfailprintk(ioc,
+				    ioc_warn(ioc, "failure at %s:%d/%s()!\n",
+					     __FILE__, __LINE__, __func__));
+			return 1;
+		}
+
+		if (_scsih_get_volume_capabilities(ioc, raid_device)) {
+			dfailprintk(ioc,
+				    ioc_warn(ioc, "failure at %s:%d/%s()!\n",
+					     __FILE__, __LINE__, __func__));
+			return 1;
+		}
+
+		/*
+		 * WARPDRIVE: Initialize the required data for Direct IO
+		 */
+		mpt3sas_init_warpdrive_properties(ioc, raid_device);
+
+		/* RAID Queue Depth Support
+		 * IS volume = underlying qdepth of drive type, either
+		 *    MPT3SAS_SAS_QUEUE_DEPTH or MPT3SAS_SATA_QUEUE_DEPTH
+		 * IM/IME/R10 = 128 (MPT3SAS_RAID_QUEUE_DEPTH)
+		 */
+		if (raid_device->device_info &
+		    MPI2_SAS_DEVICE_INFO_SSP_TARGET) {
+			qdepth = MPT3SAS_SAS_QUEUE_DEPTH;
+			ds = "SSP";
+		} else {
+			qdepth = MPT3SAS_SATA_QUEUE_DEPTH;
+			if (raid_device->device_info &
+			    MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
+				ds = "SATA";
+			else
+				ds = "STP";
+		}
+
+		switch (raid_device->volume_type) {
+		case MPI2_RAID_VOL_TYPE_RAID0:
+			r_level = "RAID0";
+			break;
+		case MPI2_RAID_VOL_TYPE_RAID1E:
+			qdepth = MPT3SAS_RAID_QUEUE_DEPTH;
+			if (ioc->manu_pg10.OEMIdentifier &&
+			    (le32_to_cpu(ioc->manu_pg10.GenericFlags0) &
+			    MFG10_GF0_R10_DISPLAY) &&
+			    !(raid_device->num_pds % 2))
+				r_level = "RAID10";
+			else
+				r_level = "RAID1E";
+			break;
+		case MPI2_RAID_VOL_TYPE_RAID1:
+			qdepth = MPT3SAS_RAID_QUEUE_DEPTH;
+			r_level = "RAID1";
+			break;
+		case MPI2_RAID_VOL_TYPE_RAID10:
+			qdepth = MPT3SAS_RAID_QUEUE_DEPTH;
+			r_level = "RAID10";
+			break;
+		case MPI2_RAID_VOL_TYPE_UNKNOWN:
+		default:
+			qdepth = MPT3SAS_RAID_QUEUE_DEPTH;
+			r_level = "RAIDX";
+			break;
+		}
+
+		if (!ioc->hide_ir_msg)
+			sdev_printk(KERN_INFO, sdev,
+			   "%s: handle(0x%04x), wwid(0x%016llx),"
+			    " pd_count(%d), type(%s)\n",
+			    r_level, raid_device->handle,
+			    (unsigned long long)raid_device->wwid,
+			    raid_device->num_pds, ds);
+
+		if (shost->max_sectors > MPT3SAS_RAID_MAX_SECTORS) {
+			blk_queue_max_hw_sectors(sdev->request_queue,
+						MPT3SAS_RAID_MAX_SECTORS);
+			sdev_printk(KERN_INFO, sdev,
+					"Set queue's max_sector to: %u\n",
+						MPT3SAS_RAID_MAX_SECTORS);
+		}
+
+		mpt3sas_scsih_change_queue_depth(sdev, qdepth);
+
+		/* raid transport support */
+		if (!ioc->is_warpdrive)
+			_scsih_set_level(ioc, sdev, raid_device->volume_type);
+		return 0;
+	}
+
+	/* non-raid handling */
+	if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
+		if (mpt3sas_config_get_volume_handle(ioc, handle,
+		    &volume_handle)) {
+			dfailprintk(ioc,
+				    ioc_warn(ioc, "failure at %s:%d/%s()!\n",
+					     __FILE__, __LINE__, __func__));
+			return 1;
+		}
+		if (volume_handle && mpt3sas_config_get_volume_wwid(ioc,
+		    volume_handle, &volume_wwid)) {
+			dfailprintk(ioc,
+				    ioc_warn(ioc, "failure at %s:%d/%s()!\n",
+					     __FILE__, __LINE__, __func__));
+			return 1;
+		}
+	}
+
+	/* PCIe handling */
+	if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_PCIE_DEVICE) {
+		spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+		pcie_device = __mpt3sas_get_pdev_by_wwid(ioc,
+				sas_device_priv_data->sas_target->sas_address);
+		if (!pcie_device) {
+			spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+			dfailprintk(ioc,
+				    ioc_warn(ioc, "failure at %s:%d/%s()!\n",
+					     __FILE__, __LINE__, __func__));
+			return 1;
+		}
+
+		qdepth = ioc->max_nvme_qd;
+		ds = "NVMe";
+		sdev_printk(KERN_INFO, sdev,
+			"%s: handle(0x%04x), wwid(0x%016llx), port(%d)\n",
+			ds, handle, (unsigned long long)pcie_device->wwid,
+			pcie_device->port_num);
+		if (pcie_device->enclosure_handle != 0)
+			sdev_printk(KERN_INFO, sdev,
+			"%s: enclosure logical id(0x%016llx), slot(%d)\n",
+			ds,
+			(unsigned long long)pcie_device->enclosure_logical_id,
+			pcie_device->slot);
+		if (pcie_device->connector_name[0] != '\0')
+			sdev_printk(KERN_INFO, sdev,
+				"%s: enclosure level(0x%04x),"
+				"connector name( %s)\n", ds,
+				pcie_device->enclosure_level,
+				pcie_device->connector_name);
+
+		if (pcie_device->nvme_mdts)
+			blk_queue_max_hw_sectors(sdev->request_queue,
+					pcie_device->nvme_mdts/512);
+
+		pcie_device_put(pcie_device);
+		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+		mpt3sas_scsih_change_queue_depth(sdev, qdepth);
+		/* Enable QUEUE_FLAG_NOMERGES flag, so that IOs won't be
+		 ** merged and can eliminate holes created during merging
+		 ** operation.
+		 **/
+		blk_queue_flag_set(QUEUE_FLAG_NOMERGES,
+				sdev->request_queue);
+		blk_queue_virt_boundary(sdev->request_queue,
+				ioc->page_size - 1);
+		return 0;
+	}
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_by_addr(ioc,
+	   sas_device_priv_data->sas_target->sas_address,
+	   sas_device_priv_data->sas_target->port);
+	if (!sas_device) {
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+		dfailprintk(ioc,
+			    ioc_warn(ioc, "failure at %s:%d/%s()!\n",
+				     __FILE__, __LINE__, __func__));
+		return 1;
+	}
+
+	sas_device->volume_handle = volume_handle;
+	sas_device->volume_wwid = volume_wwid;
+	if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) {
+		qdepth = (sas_device->port_type > 1) ?
+			ioc->max_wideport_qd : ioc->max_narrowport_qd;
+		ssp_target = 1;
+		if (sas_device->device_info &
+				MPI2_SAS_DEVICE_INFO_SEP) {
+			sdev_printk(KERN_WARNING, sdev,
+			"set ignore_delay_remove for handle(0x%04x)\n",
+			sas_device_priv_data->sas_target->handle);
+			sas_device_priv_data->ignore_delay_remove = 1;
+			ds = "SES";
+		} else
+			ds = "SSP";
+	} else {
+		qdepth = ioc->max_sata_qd;
+		if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET)
+			ds = "STP";
+		else if (sas_device->device_info &
+		    MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
+			ds = "SATA";
+	}
+
+	sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), " \
+	    "sas_addr(0x%016llx), phy(%d), device_name(0x%016llx)\n",
+	    ds, handle, (unsigned long long)sas_device->sas_address,
+	    sas_device->phy, (unsigned long long)sas_device->device_name);
+
+	_scsih_display_enclosure_chassis_info(NULL, sas_device, sdev, NULL);
+
+	sas_device_put(sas_device);
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	if (!ssp_target)
+		_scsih_display_sata_capabilities(ioc, handle, sdev);
+
+
+	mpt3sas_scsih_change_queue_depth(sdev, qdepth);
+
+	if (ssp_target) {
+		sas_read_port_mode_page(sdev);
+		_scsih_enable_tlr(ioc, sdev);
+	}
+
+	return 0;
+}
+
+/**
+ * scsih_bios_param - fetch head, sector, cylinder info for a disk
+ * @sdev: scsi device struct
+ * @bdev: pointer to block device context
+ * @capacity: device size (in 512 byte sectors)
+ * @params: three element array to place output:
+ *              params[0] number of heads (max 255)
+ *              params[1] number of sectors (max 63)
+ *              params[2] number of cylinders
+ */
+static int
+scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
+	sector_t capacity, int params[])
+{
+	int		heads;
+	int		sectors;
+	sector_t	cylinders;
+	ulong		dummy;
+
+	heads = 64;
+	sectors = 32;
+
+	dummy = heads * sectors;
+	cylinders = capacity;
+	sector_div(cylinders, dummy);
+
+	/*
+	 * Handle extended translation size for logical drives
+	 * > 1Gb
+	 */
+	if ((ulong)capacity >= 0x200000) {
+		heads = 255;
+		sectors = 63;
+		dummy = heads * sectors;
+		cylinders = capacity;
+		sector_div(cylinders, dummy);
+	}
+
+	/* return result */
+	params[0] = heads;
+	params[1] = sectors;
+	params[2] = cylinders;
+
+	return 0;
+}
+
+/**
+ * _scsih_response_code - translation of device response code
+ * @ioc: per adapter object
+ * @response_code: response code returned by the device
+ */
+static void
+_scsih_response_code(struct MPT3SAS_ADAPTER *ioc, u8 response_code)
+{
+	char *desc;
+
+	switch (response_code) {
+	case MPI2_SCSITASKMGMT_RSP_TM_COMPLETE:
+		desc = "task management request completed";
+		break;
+	case MPI2_SCSITASKMGMT_RSP_INVALID_FRAME:
+		desc = "invalid frame";
+		break;
+	case MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED:
+		desc = "task management request not supported";
+		break;
+	case MPI2_SCSITASKMGMT_RSP_TM_FAILED:
+		desc = "task management request failed";
+		break;
+	case MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED:
+		desc = "task management request succeeded";
+		break;
+	case MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN:
+		desc = "invalid lun";
+		break;
+	case 0xA:
+		desc = "overlapped tag attempted";
+		break;
+	case MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC:
+		desc = "task queued, however not sent to target";
+		break;
+	default:
+		desc = "unknown";
+		break;
+	}
+	ioc_warn(ioc, "response_code(0x%01x): %s\n", response_code, desc);
+}
+
+/**
+ * _scsih_tm_done - tm completion routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: none.
+ *
+ * The callback handler when using scsih_issue_tm.
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *         0 means the mf is freed from this function.
+ */
+static u8
+_scsih_tm_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
+{
+	MPI2DefaultReply_t *mpi_reply;
+
+	if (ioc->tm_cmds.status == MPT3_CMD_NOT_USED)
+		return 1;
+	if (ioc->tm_cmds.smid != smid)
+		return 1;
+	ioc->tm_cmds.status |= MPT3_CMD_COMPLETE;
+	mpi_reply =  mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	if (mpi_reply) {
+		memcpy(ioc->tm_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
+		ioc->tm_cmds.status |= MPT3_CMD_REPLY_VALID;
+	}
+	ioc->tm_cmds.status &= ~MPT3_CMD_PENDING;
+	complete(&ioc->tm_cmds.done);
+	return 1;
+}
+
+/**
+ * mpt3sas_scsih_set_tm_flag - set per target tm_busy
+ * @ioc: per adapter object
+ * @handle: device handle
+ *
+ * During taskmangement request, we need to freeze the device queue.
+ */
+void
+mpt3sas_scsih_set_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_device *sdev;
+	u8 skip = 0;
+
+	shost_for_each_device(sdev, ioc->shost) {
+		if (skip)
+			continue;
+		sas_device_priv_data = sdev->hostdata;
+		if (!sas_device_priv_data)
+			continue;
+		if (sas_device_priv_data->sas_target->handle == handle) {
+			sas_device_priv_data->sas_target->tm_busy = 1;
+			skip = 1;
+			ioc->ignore_loginfos = 1;
+		}
+	}
+}
+
+/**
+ * mpt3sas_scsih_clear_tm_flag - clear per target tm_busy
+ * @ioc: per adapter object
+ * @handle: device handle
+ *
+ * During taskmangement request, we need to freeze the device queue.
+ */
+void
+mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_device *sdev;
+	u8 skip = 0;
+
+	shost_for_each_device(sdev, ioc->shost) {
+		if (skip)
+			continue;
+		sas_device_priv_data = sdev->hostdata;
+		if (!sas_device_priv_data)
+			continue;
+		if (sas_device_priv_data->sas_target->handle == handle) {
+			sas_device_priv_data->sas_target->tm_busy = 0;
+			skip = 1;
+			ioc->ignore_loginfos = 0;
+		}
+	}
+}
+
+/**
+ * scsih_tm_cmd_map_status - map the target reset & LUN reset TM status
+ * @ioc: per adapter object
+ * @channel: the channel assigned by the OS
+ * @id: the id assigned by the OS
+ * @lun: lun number
+ * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h)
+ * @smid_task: smid assigned to the task
+ *
+ * Look whether TM has aborted the timed out SCSI command, if
+ * TM has aborted the IO then return SUCCESS else return FAILED.
+ */
+static int
+scsih_tm_cmd_map_status(struct MPT3SAS_ADAPTER *ioc, uint channel,
+	uint id, uint lun, u8 type, u16 smid_task)
+{
+
+	if (smid_task <= ioc->shost->can_queue) {
+		switch (type) {
+		case MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET:
+			if (!(_scsih_scsi_lookup_find_by_target(ioc,
+			    id, channel)))
+				return SUCCESS;
+			break;
+		case MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET:
+		case MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET:
+			if (!(_scsih_scsi_lookup_find_by_lun(ioc, id,
+			    lun, channel)))
+				return SUCCESS;
+			break;
+		default:
+			return SUCCESS;
+		}
+	} else if (smid_task == ioc->scsih_cmds.smid) {
+		if ((ioc->scsih_cmds.status & MPT3_CMD_COMPLETE) ||
+		    (ioc->scsih_cmds.status & MPT3_CMD_NOT_USED))
+			return SUCCESS;
+	} else if (smid_task == ioc->ctl_cmds.smid) {
+		if ((ioc->ctl_cmds.status & MPT3_CMD_COMPLETE) ||
+		    (ioc->ctl_cmds.status & MPT3_CMD_NOT_USED))
+			return SUCCESS;
+	}
+
+	return FAILED;
+}
+
+/**
+ * scsih_tm_post_processing - post processing of target & LUN reset
+ * @ioc: per adapter object
+ * @handle: device handle
+ * @channel: the channel assigned by the OS
+ * @id: the id assigned by the OS
+ * @lun: lun number
+ * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h)
+ * @smid_task: smid assigned to the task
+ *
+ * Post processing of target & LUN reset. Due to interrupt latency
+ * issue it possible that interrupt for aborted IO might not be
+ * received yet. So before returning failure status, poll the
+ * reply descriptor pools for the reply of timed out SCSI command.
+ * Return FAILED status if reply for timed out is not received
+ * otherwise return SUCCESS.
+ */
+static int
+scsih_tm_post_processing(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	uint channel, uint id, uint lun, u8 type, u16 smid_task)
+{
+	int rc;
+
+	rc = scsih_tm_cmd_map_status(ioc, channel, id, lun, type, smid_task);
+	if (rc == SUCCESS)
+		return rc;
+
+	ioc_info(ioc,
+	    "Poll ReplyDescriptor queues for completion of"
+	    " smid(%d), task_type(0x%02x), handle(0x%04x)\n",
+	    smid_task, type, handle);
+
+	/*
+	 * Due to interrupt latency issues, driver may receive interrupt for
+	 * TM first and then for aborted SCSI IO command. So, poll all the
+	 * ReplyDescriptor pools before returning the FAILED status to SML.
+	 */
+	mpt3sas_base_mask_interrupts(ioc);
+	mpt3sas_base_sync_reply_irqs(ioc, 1);
+	mpt3sas_base_unmask_interrupts(ioc);
+
+	return scsih_tm_cmd_map_status(ioc, channel, id, lun, type, smid_task);
+}
+
+/**
+ * mpt3sas_scsih_issue_tm - main routine for sending tm requests
+ * @ioc: per adapter struct
+ * @handle: device handle
+ * @channel: the channel assigned by the OS
+ * @id: the id assigned by the OS
+ * @lun: lun number
+ * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h)
+ * @smid_task: smid assigned to the task
+ * @msix_task: MSIX table index supplied by the OS
+ * @timeout: timeout in seconds
+ * @tr_method: Target Reset Method
+ * Context: user
+ *
+ * A generic API for sending task management requests to firmware.
+ *
+ * The callback index is set inside `ioc->tm_cb_idx`.
+ * The caller is responsible to check for outstanding commands.
+ *
+ * Return: SUCCESS or FAILED.
+ */
+int
+mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, uint channel,
+	uint id, u64 lun, u8 type, u16 smid_task, u16 msix_task,
+	u8 timeout, u8 tr_method)
+{
+	Mpi2SCSITaskManagementRequest_t *mpi_request;
+	Mpi2SCSITaskManagementReply_t *mpi_reply;
+	Mpi25SCSIIORequest_t *request;
+	u16 smid = 0;
+	u32 ioc_state;
+	int rc;
+	u8 issue_reset = 0;
+
+	lockdep_assert_held(&ioc->tm_cmds.mutex);
+
+	if (ioc->tm_cmds.status != MPT3_CMD_NOT_USED) {
+		ioc_info(ioc, "%s: tm_cmd busy!!!\n", __func__);
+		return FAILED;
+	}
+
+	if (ioc->shost_recovery || ioc->remove_host ||
+	    ioc->pci_error_recovery) {
+		ioc_info(ioc, "%s: host reset in progress!\n", __func__);
+		return FAILED;
+	}
+
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+	if (ioc_state & MPI2_DOORBELL_USED) {
+		dhsprintk(ioc, ioc_info(ioc, "unexpected doorbell active!\n"));
+		rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+		return (!rc) ? SUCCESS : FAILED;
+	}
+
+	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
+		mpt3sas_print_fault_code(ioc, ioc_state &
+		    MPI2_DOORBELL_DATA_MASK);
+		rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+		return (!rc) ? SUCCESS : FAILED;
+	} else if ((ioc_state & MPI2_IOC_STATE_MASK) ==
+	    MPI2_IOC_STATE_COREDUMP) {
+		mpt3sas_print_coredump_info(ioc, ioc_state &
+		    MPI2_DOORBELL_DATA_MASK);
+		rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+		return (!rc) ? SUCCESS : FAILED;
+	}
+
+	smid = mpt3sas_base_get_smid_hpr(ioc, ioc->tm_cb_idx);
+	if (!smid) {
+		ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
+		return FAILED;
+	}
+
+	dtmprintk(ioc,
+		  ioc_info(ioc, "sending tm: handle(0x%04x), task_type(0x%02x), smid(%d), timeout(%d), tr_method(0x%x)\n",
+			   handle, type, smid_task, timeout, tr_method));
+	ioc->tm_cmds.status = MPT3_CMD_PENDING;
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->tm_cmds.smid = smid;
+	memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
+	memset(ioc->tm_cmds.reply, 0, sizeof(Mpi2SCSITaskManagementReply_t));
+	mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
+	mpi_request->DevHandle = cpu_to_le16(handle);
+	mpi_request->TaskType = type;
+	if (type == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK ||
+	    type == MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK)
+		mpi_request->MsgFlags = tr_method;
+	mpi_request->TaskMID = cpu_to_le16(smid_task);
+	int_to_scsilun(lun, (struct scsi_lun *)mpi_request->LUN);
+	mpt3sas_scsih_set_tm_flag(ioc, handle);
+	init_completion(&ioc->tm_cmds.done);
+	ioc->put_smid_hi_priority(ioc, smid, msix_task);
+	wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ);
+	if (!(ioc->tm_cmds.status & MPT3_CMD_COMPLETE)) {
+		mpt3sas_check_cmd_timeout(ioc,
+		    ioc->tm_cmds.status, mpi_request,
+		    sizeof(Mpi2SCSITaskManagementRequest_t)/4, issue_reset);
+		if (issue_reset) {
+			rc = mpt3sas_base_hard_reset_handler(ioc,
+					FORCE_BIG_HAMMER);
+			rc = (!rc) ? SUCCESS : FAILED;
+			goto out;
+		}
+	}
+
+	/* sync IRQs in case those were busy during flush. */
+	mpt3sas_base_sync_reply_irqs(ioc, 0);
+
+	if (ioc->tm_cmds.status & MPT3_CMD_REPLY_VALID) {
+		mpt3sas_trigger_master(ioc, MASTER_TRIGGER_TASK_MANAGMENT);
+		mpi_reply = ioc->tm_cmds.reply;
+		dtmprintk(ioc,
+			  ioc_info(ioc, "complete tm: ioc_status(0x%04x), loginfo(0x%08x), term_count(0x%08x)\n",
+				   le16_to_cpu(mpi_reply->IOCStatus),
+				   le32_to_cpu(mpi_reply->IOCLogInfo),
+				   le32_to_cpu(mpi_reply->TerminationCount)));
+		if (ioc->logging_level & MPT_DEBUG_TM) {
+			_scsih_response_code(ioc, mpi_reply->ResponseCode);
+			if (mpi_reply->IOCStatus)
+				_debug_dump_mf(mpi_request,
+				    sizeof(Mpi2SCSITaskManagementRequest_t)/4);
+		}
+	}
+
+	switch (type) {
+	case MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK:
+		rc = SUCCESS;
+		/*
+		 * If DevHandle filed in smid_task's entry of request pool
+		 * doesn't match with device handle on which this task abort
+		 * TM is received then it means that TM has successfully
+		 * aborted the timed out command. Since smid_task's entry in
+		 * request pool will be memset to zero once the timed out
+		 * command is returned to the SML. If the command is not
+		 * aborted then smid_task’s entry won’t be cleared and it
+		 * will have same DevHandle value on which this task abort TM
+		 * is received and driver will return the TM status as FAILED.
+		 */
+		request = mpt3sas_base_get_msg_frame(ioc, smid_task);
+		if (le16_to_cpu(request->DevHandle) != handle)
+			break;
+
+		ioc_info(ioc, "Task abort tm failed: handle(0x%04x),"
+		    "timeout(%d) tr_method(0x%x) smid(%d) msix_index(%d)\n",
+		    handle, timeout, tr_method, smid_task, msix_task);
+		rc = FAILED;
+		break;
+
+	case MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET:
+	case MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET:
+	case MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET:
+		rc = scsih_tm_post_processing(ioc, handle, channel, id, lun,
+		    type, smid_task);
+		break;
+	case MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK:
+		rc = SUCCESS;
+		break;
+	default:
+		rc = FAILED;
+		break;
+	}
+
+out:
+	mpt3sas_scsih_clear_tm_flag(ioc, handle);
+	ioc->tm_cmds.status = MPT3_CMD_NOT_USED;
+	return rc;
+}
+
+int mpt3sas_scsih_issue_locked_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+		uint channel, uint id, u64 lun, u8 type, u16 smid_task,
+		u16 msix_task, u8 timeout, u8 tr_method)
+{
+	int ret;
+
+	mutex_lock(&ioc->tm_cmds.mutex);
+	ret = mpt3sas_scsih_issue_tm(ioc, handle, channel, id, lun, type,
+			smid_task, msix_task, timeout, tr_method);
+	mutex_unlock(&ioc->tm_cmds.mutex);
+
+	return ret;
+}
+
+/**
+ * _scsih_tm_display_info - displays info about the device
+ * @ioc: per adapter struct
+ * @scmd: pointer to scsi command object
+ *
+ * Called by task management callback handlers.
+ */
+static void
+_scsih_tm_display_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd)
+{
+	struct scsi_target *starget = scmd->device->sdev_target;
+	struct MPT3SAS_TARGET *priv_target = starget->hostdata;
+	struct _sas_device *sas_device = NULL;
+	struct _pcie_device *pcie_device = NULL;
+	unsigned long flags;
+	char *device_str = NULL;
+
+	if (!priv_target)
+		return;
+	if (ioc->hide_ir_msg)
+		device_str = "WarpDrive";
+	else
+		device_str = "volume";
+
+	scsi_print_command(scmd);
+	if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
+		starget_printk(KERN_INFO, starget,
+			"%s handle(0x%04x), %s wwid(0x%016llx)\n",
+			device_str, priv_target->handle,
+		    device_str, (unsigned long long)priv_target->sas_address);
+
+	} else if (priv_target->flags & MPT_TARGET_FLAGS_PCIE_DEVICE) {
+		spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+		pcie_device = __mpt3sas_get_pdev_from_target(ioc, priv_target);
+		if (pcie_device) {
+			starget_printk(KERN_INFO, starget,
+				"handle(0x%04x), wwid(0x%016llx), port(%d)\n",
+				pcie_device->handle,
+				(unsigned long long)pcie_device->wwid,
+				pcie_device->port_num);
+			if (pcie_device->enclosure_handle != 0)
+				starget_printk(KERN_INFO, starget,
+					"enclosure logical id(0x%016llx), slot(%d)\n",
+					(unsigned long long)
+					pcie_device->enclosure_logical_id,
+					pcie_device->slot);
+			if (pcie_device->connector_name[0] != '\0')
+				starget_printk(KERN_INFO, starget,
+					"enclosure level(0x%04x), connector name( %s)\n",
+					pcie_device->enclosure_level,
+					pcie_device->connector_name);
+			pcie_device_put(pcie_device);
+		}
+		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+	} else {
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		sas_device = __mpt3sas_get_sdev_from_target(ioc, priv_target);
+		if (sas_device) {
+			if (priv_target->flags &
+			    MPT_TARGET_FLAGS_RAID_COMPONENT) {
+				starget_printk(KERN_INFO, starget,
+				    "volume handle(0x%04x), "
+				    "volume wwid(0x%016llx)\n",
+				    sas_device->volume_handle,
+				   (unsigned long long)sas_device->volume_wwid);
+			}
+			starget_printk(KERN_INFO, starget,
+			    "handle(0x%04x), sas_address(0x%016llx), phy(%d)\n",
+			    sas_device->handle,
+			    (unsigned long long)sas_device->sas_address,
+			    sas_device->phy);
+
+			_scsih_display_enclosure_chassis_info(NULL, sas_device,
+			    NULL, starget);
+
+			sas_device_put(sas_device);
+		}
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	}
+}
+
+/**
+ * scsih_abort - eh threads main abort routine
+ * @scmd: pointer to scsi command object
+ *
+ * Return: SUCCESS if command aborted else FAILED
+ */
+static int
+scsih_abort(struct scsi_cmnd *scmd)
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsiio_tracker *st = scsi_cmd_priv(scmd);
+	u16 handle;
+	int r;
+
+	u8 timeout = 30;
+	struct _pcie_device *pcie_device = NULL;
+	sdev_printk(KERN_INFO, scmd->device, "attempting task abort!"
+	    "scmd(0x%p), outstanding for %u ms & timeout %u ms\n",
+	    scmd, jiffies_to_msecs(jiffies - scmd->jiffies_at_alloc),
+	    (scsi_cmd_to_rq(scmd)->timeout / HZ) * 1000);
+	_scsih_tm_display_info(ioc, scmd);
+
+	sas_device_priv_data = scmd->device->hostdata;
+	if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
+	    ioc->remove_host) {
+		sdev_printk(KERN_INFO, scmd->device,
+		    "device been deleted! scmd(0x%p)\n", scmd);
+		scmd->result = DID_NO_CONNECT << 16;
+		scsi_done(scmd);
+		r = SUCCESS;
+		goto out;
+	}
+
+	/* check for completed command */
+	if (st == NULL || st->cb_idx == 0xFF) {
+		sdev_printk(KERN_INFO, scmd->device, "No reference found at "
+		    "driver, assuming scmd(0x%p) might have completed\n", scmd);
+		scmd->result = DID_RESET << 16;
+		r = SUCCESS;
+		goto out;
+	}
+
+	/* for hidden raid components and volumes this is not supported */
+	if (sas_device_priv_data->sas_target->flags &
+	    MPT_TARGET_FLAGS_RAID_COMPONENT ||
+	    sas_device_priv_data->sas_target->flags & MPT_TARGET_FLAGS_VOLUME) {
+		scmd->result = DID_RESET << 16;
+		r = FAILED;
+		goto out;
+	}
+
+	mpt3sas_halt_firmware(ioc);
+
+	handle = sas_device_priv_data->sas_target->handle;
+	pcie_device = mpt3sas_get_pdev_by_handle(ioc, handle);
+	if (pcie_device && (!ioc->tm_custom_handling) &&
+	    (!(mpt3sas_scsih_is_pcie_scsi_device(pcie_device->device_info))))
+		timeout = ioc->nvme_abort_timeout;
+	r = mpt3sas_scsih_issue_locked_tm(ioc, handle, scmd->device->channel,
+		scmd->device->id, scmd->device->lun,
+		MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
+		st->smid, st->msix_io, timeout, 0);
+	/* Command must be cleared after abort */
+	if (r == SUCCESS && st->cb_idx != 0xFF)
+		r = FAILED;
+ out:
+	sdev_printk(KERN_INFO, scmd->device, "task abort: %s scmd(0x%p)\n",
+	    ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+	if (pcie_device)
+		pcie_device_put(pcie_device);
+	return r;
+}
+
+/**
+ * scsih_dev_reset - eh threads main device reset routine
+ * @scmd: pointer to scsi command object
+ *
+ * Return: SUCCESS if command aborted else FAILED
+ */
+static int
+scsih_dev_reset(struct scsi_cmnd *scmd)
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct _sas_device *sas_device = NULL;
+	struct _pcie_device *pcie_device = NULL;
+	u16	handle;
+	u8	tr_method = 0;
+	u8	tr_timeout = 30;
+	int r;
+
+	struct scsi_target *starget = scmd->device->sdev_target;
+	struct MPT3SAS_TARGET *target_priv_data = starget->hostdata;
+
+	sdev_printk(KERN_INFO, scmd->device,
+	    "attempting device reset! scmd(0x%p)\n", scmd);
+	_scsih_tm_display_info(ioc, scmd);
+
+	sas_device_priv_data = scmd->device->hostdata;
+	if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
+	    ioc->remove_host) {
+		sdev_printk(KERN_INFO, scmd->device,
+		    "device been deleted! scmd(0x%p)\n", scmd);
+		scmd->result = DID_NO_CONNECT << 16;
+		scsi_done(scmd);
+		r = SUCCESS;
+		goto out;
+	}
+
+	/* for hidden raid components obtain the volume_handle */
+	handle = 0;
+	if (sas_device_priv_data->sas_target->flags &
+	    MPT_TARGET_FLAGS_RAID_COMPONENT) {
+		sas_device = mpt3sas_get_sdev_from_target(ioc,
+				target_priv_data);
+		if (sas_device)
+			handle = sas_device->volume_handle;
+	} else
+		handle = sas_device_priv_data->sas_target->handle;
+
+	if (!handle) {
+		scmd->result = DID_RESET << 16;
+		r = FAILED;
+		goto out;
+	}
+
+	pcie_device = mpt3sas_get_pdev_by_handle(ioc, handle);
+
+	if (pcie_device && (!ioc->tm_custom_handling) &&
+	    (!(mpt3sas_scsih_is_pcie_scsi_device(pcie_device->device_info)))) {
+		tr_timeout = pcie_device->reset_timeout;
+		tr_method = MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE;
+	} else
+		tr_method = MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET;
+
+	r = mpt3sas_scsih_issue_locked_tm(ioc, handle, scmd->device->channel,
+		scmd->device->id, scmd->device->lun,
+		MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, 0, 0,
+		tr_timeout, tr_method);
+	/* Check for busy commands after reset */
+	if (r == SUCCESS && scsi_device_busy(scmd->device))
+		r = FAILED;
+ out:
+	sdev_printk(KERN_INFO, scmd->device, "device reset: %s scmd(0x%p)\n",
+	    ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+
+	if (sas_device)
+		sas_device_put(sas_device);
+	if (pcie_device)
+		pcie_device_put(pcie_device);
+
+	return r;
+}
+
+/**
+ * scsih_target_reset - eh threads main target reset routine
+ * @scmd: pointer to scsi command object
+ *
+ * Return: SUCCESS if command aborted else FAILED
+ */
+static int
+scsih_target_reset(struct scsi_cmnd *scmd)
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct _sas_device *sas_device = NULL;
+	struct _pcie_device *pcie_device = NULL;
+	u16	handle;
+	u8	tr_method = 0;
+	u8	tr_timeout = 30;
+	int r;
+	struct scsi_target *starget = scmd->device->sdev_target;
+	struct MPT3SAS_TARGET *target_priv_data = starget->hostdata;
+
+	starget_printk(KERN_INFO, starget,
+	    "attempting target reset! scmd(0x%p)\n", scmd);
+	_scsih_tm_display_info(ioc, scmd);
+
+	sas_device_priv_data = scmd->device->hostdata;
+	if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
+	    ioc->remove_host) {
+		starget_printk(KERN_INFO, starget,
+		    "target been deleted! scmd(0x%p)\n", scmd);
+		scmd->result = DID_NO_CONNECT << 16;
+		scsi_done(scmd);
+		r = SUCCESS;
+		goto out;
+	}
+
+	/* for hidden raid components obtain the volume_handle */
+	handle = 0;
+	if (sas_device_priv_data->sas_target->flags &
+	    MPT_TARGET_FLAGS_RAID_COMPONENT) {
+		sas_device = mpt3sas_get_sdev_from_target(ioc,
+				target_priv_data);
+		if (sas_device)
+			handle = sas_device->volume_handle;
+	} else
+		handle = sas_device_priv_data->sas_target->handle;
+
+	if (!handle) {
+		scmd->result = DID_RESET << 16;
+		r = FAILED;
+		goto out;
+	}
+
+	pcie_device = mpt3sas_get_pdev_by_handle(ioc, handle);
+
+	if (pcie_device && (!ioc->tm_custom_handling) &&
+	    (!(mpt3sas_scsih_is_pcie_scsi_device(pcie_device->device_info)))) {
+		tr_timeout = pcie_device->reset_timeout;
+		tr_method = MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE;
+	} else
+		tr_method = MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET;
+	r = mpt3sas_scsih_issue_locked_tm(ioc, handle, scmd->device->channel,
+		scmd->device->id, 0,
+		MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 0,
+	    tr_timeout, tr_method);
+	/* Check for busy commands after reset */
+	if (r == SUCCESS && atomic_read(&starget->target_busy))
+		r = FAILED;
+ out:
+	starget_printk(KERN_INFO, starget, "target reset: %s scmd(0x%p)\n",
+	    ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+
+	if (sas_device)
+		sas_device_put(sas_device);
+	if (pcie_device)
+		pcie_device_put(pcie_device);
+	return r;
+}
+
+
+/**
+ * scsih_host_reset - eh threads main host reset routine
+ * @scmd: pointer to scsi command object
+ *
+ * Return: SUCCESS if command aborted else FAILED
+ */
+static int
+scsih_host_reset(struct scsi_cmnd *scmd)
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
+	int r, retval;
+
+	ioc_info(ioc, "attempting host reset! scmd(0x%p)\n", scmd);
+	scsi_print_command(scmd);
+
+	if (ioc->is_driver_loading || ioc->remove_host) {
+		ioc_info(ioc, "Blocking the host reset\n");
+		r = FAILED;
+		goto out;
+	}
+
+	retval = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+	r = (retval < 0) ? FAILED : SUCCESS;
+out:
+	ioc_info(ioc, "host reset: %s scmd(0x%p)\n",
+		 r == SUCCESS ? "SUCCESS" : "FAILED", scmd);
+
+	return r;
+}
+
+/**
+ * _scsih_fw_event_add - insert and queue up fw_event
+ * @ioc: per adapter object
+ * @fw_event: object describing the event
+ * Context: This function will acquire ioc->fw_event_lock.
+ *
+ * This adds the firmware event object into link list, then queues it up to
+ * be processed from user context.
+ */
+static void
+_scsih_fw_event_add(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
+{
+	unsigned long flags;
+
+	if (ioc->firmware_event_thread == NULL)
+		return;
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	fw_event_work_get(fw_event);
+	INIT_LIST_HEAD(&fw_event->list);
+	list_add_tail(&fw_event->list, &ioc->fw_event_list);
+	INIT_WORK(&fw_event->work, _firmware_event_work);
+	fw_event_work_get(fw_event);
+	queue_work(ioc->firmware_event_thread, &fw_event->work);
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/**
+ * _scsih_fw_event_del_from_list - delete fw_event from the list
+ * @ioc: per adapter object
+ * @fw_event: object describing the event
+ * Context: This function will acquire ioc->fw_event_lock.
+ *
+ * If the fw_event is on the fw_event_list, remove it and do a put.
+ */
+static void
+_scsih_fw_event_del_from_list(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work
+	*fw_event)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	if (!list_empty(&fw_event->list)) {
+		list_del_init(&fw_event->list);
+		fw_event_work_put(fw_event);
+	}
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+
+ /**
+ * mpt3sas_send_trigger_data_event - send event for processing trigger data
+ * @ioc: per adapter object
+ * @event_data: trigger event data
+ */
+void
+mpt3sas_send_trigger_data_event(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data)
+{
+	struct fw_event_work *fw_event;
+	u16 sz;
+
+	if (ioc->is_driver_loading)
+		return;
+	sz = sizeof(*event_data);
+	fw_event = alloc_fw_event_work(sz);
+	if (!fw_event)
+		return;
+	fw_event->event = MPT3SAS_PROCESS_TRIGGER_DIAG;
+	fw_event->ioc = ioc;
+	memcpy(fw_event->event_data, event_data, sizeof(*event_data));
+	_scsih_fw_event_add(ioc, fw_event);
+	fw_event_work_put(fw_event);
+}
+
+/**
+ * _scsih_error_recovery_delete_devices - remove devices not responding
+ * @ioc: per adapter object
+ */
+static void
+_scsih_error_recovery_delete_devices(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct fw_event_work *fw_event;
+
+	fw_event = alloc_fw_event_work(0);
+	if (!fw_event)
+		return;
+	fw_event->event = MPT3SAS_REMOVE_UNRESPONDING_DEVICES;
+	fw_event->ioc = ioc;
+	_scsih_fw_event_add(ioc, fw_event);
+	fw_event_work_put(fw_event);
+}
+
+/**
+ * mpt3sas_port_enable_complete - port enable completed (fake event)
+ * @ioc: per adapter object
+ */
+void
+mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct fw_event_work *fw_event;
+
+	fw_event = alloc_fw_event_work(0);
+	if (!fw_event)
+		return;
+	fw_event->event = MPT3SAS_PORT_ENABLE_COMPLETE;
+	fw_event->ioc = ioc;
+	_scsih_fw_event_add(ioc, fw_event);
+	fw_event_work_put(fw_event);
+}
+
+static struct fw_event_work *dequeue_next_fw_event(struct MPT3SAS_ADAPTER *ioc)
+{
+	unsigned long flags;
+	struct fw_event_work *fw_event = NULL;
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	if (!list_empty(&ioc->fw_event_list)) {
+		fw_event = list_first_entry(&ioc->fw_event_list,
+				struct fw_event_work, list);
+		list_del_init(&fw_event->list);
+		fw_event_work_put(fw_event);
+	}
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+
+	return fw_event;
+}
+
+/**
+ * _scsih_fw_event_cleanup_queue - cleanup event queue
+ * @ioc: per adapter object
+ *
+ * Walk the firmware event queue, either killing timers, or waiting
+ * for outstanding events to complete
+ *
+ * Context: task, can sleep
+ */
+static void
+_scsih_fw_event_cleanup_queue(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct fw_event_work *fw_event;
+
+	if ((list_empty(&ioc->fw_event_list) && !ioc->current_event) ||
+	    !ioc->firmware_event_thread)
+		return;
+	/*
+	 * Set current running event as ignore, so that
+	 * current running event will exit quickly.
+	 * As diag reset has occurred it is of no use
+	 * to process remaining stale event data entries.
+	 */
+	if (ioc->shost_recovery && ioc->current_event)
+		ioc->current_event->ignore = 1;
+
+	ioc->fw_events_cleanup = 1;
+	while ((fw_event = dequeue_next_fw_event(ioc)) ||
+	     (fw_event = ioc->current_event)) {
+
+		/*
+		 * Don't call cancel_work_sync() for current_event
+		 * other than MPT3SAS_REMOVE_UNRESPONDING_DEVICES;
+		 * otherwise we may observe deadlock if current
+		 * hard reset issued as part of processing the current_event.
+		 *
+		 * Orginal logic of cleaning the current_event is added
+		 * for handling the back to back host reset issued by the user.
+		 * i.e. during back to back host reset, driver use to process
+		 * the two instances of MPT3SAS_REMOVE_UNRESPONDING_DEVICES
+		 * event back to back and this made the drives to unregister
+		 * the devices from SML.
+		 */
+
+		if (fw_event == ioc->current_event &&
+		    ioc->current_event->event !=
+		    MPT3SAS_REMOVE_UNRESPONDING_DEVICES) {
+			ioc->current_event = NULL;
+			continue;
+		}
+
+		/*
+		 * Driver has to clear ioc->start_scan flag when
+		 * it is cleaning up MPT3SAS_PORT_ENABLE_COMPLETE,
+		 * otherwise scsi_scan_host() API waits for the
+		 * 5 minute timer to expire. If we exit from
+		 * scsi_scan_host() early then we can issue the
+		 * new port enable request as part of current diag reset.
+		 */
+		if (fw_event->event == MPT3SAS_PORT_ENABLE_COMPLETE) {
+			ioc->port_enable_cmds.status |= MPT3_CMD_RESET;
+			ioc->start_scan = 0;
+		}
+
+		/*
+		 * Wait on the fw_event to complete. If this returns 1, then
+		 * the event was never executed, and we need a put for the
+		 * reference the work had on the fw_event.
+		 *
+		 * If it did execute, we wait for it to finish, and the put will
+		 * happen from _firmware_event_work()
+		 */
+		if (cancel_work_sync(&fw_event->work))
+			fw_event_work_put(fw_event);
+
+	}
+	ioc->fw_events_cleanup = 0;
+}
+
+/**
+ * _scsih_internal_device_block - block the sdev device
+ * @sdev: per device object
+ * @sas_device_priv_data : per device driver private data
+ *
+ * make sure device is blocked without error, if not
+ * print an error
+ */
+static void
+_scsih_internal_device_block(struct scsi_device *sdev,
+			struct MPT3SAS_DEVICE *sas_device_priv_data)
+{
+	int r = 0;
+
+	sdev_printk(KERN_INFO, sdev, "device_block, handle(0x%04x)\n",
+	    sas_device_priv_data->sas_target->handle);
+	sas_device_priv_data->block = 1;
+
+	r = scsi_internal_device_block_nowait(sdev);
+	if (r == -EINVAL)
+		sdev_printk(KERN_WARNING, sdev,
+		    "device_block failed with return(%d) for handle(0x%04x)\n",
+		    r, sas_device_priv_data->sas_target->handle);
+}
+
+/**
+ * _scsih_internal_device_unblock - unblock the sdev device
+ * @sdev: per device object
+ * @sas_device_priv_data : per device driver private data
+ * make sure device is unblocked without error, if not retry
+ * by blocking and then unblocking
+ */
+
+static void
+_scsih_internal_device_unblock(struct scsi_device *sdev,
+			struct MPT3SAS_DEVICE *sas_device_priv_data)
+{
+	int r = 0;
+
+	sdev_printk(KERN_WARNING, sdev, "device_unblock and setting to running, "
+	    "handle(0x%04x)\n", sas_device_priv_data->sas_target->handle);
+	sas_device_priv_data->block = 0;
+	r = scsi_internal_device_unblock_nowait(sdev, SDEV_RUNNING);
+	if (r == -EINVAL) {
+		/* The device has been set to SDEV_RUNNING by SD layer during
+		 * device addition but the request queue is still stopped by
+		 * our earlier block call. We need to perform a block again
+		 * to get the device to SDEV_BLOCK and then to SDEV_RUNNING */
+
+		sdev_printk(KERN_WARNING, sdev,
+		    "device_unblock failed with return(%d) for handle(0x%04x) "
+		    "performing a block followed by an unblock\n",
+		    r, sas_device_priv_data->sas_target->handle);
+		sas_device_priv_data->block = 1;
+		r = scsi_internal_device_block_nowait(sdev);
+		if (r)
+			sdev_printk(KERN_WARNING, sdev, "retried device_block "
+			    "failed with return(%d) for handle(0x%04x)\n",
+			    r, sas_device_priv_data->sas_target->handle);
+
+		sas_device_priv_data->block = 0;
+		r = scsi_internal_device_unblock_nowait(sdev, SDEV_RUNNING);
+		if (r)
+			sdev_printk(KERN_WARNING, sdev, "retried device_unblock"
+			    " failed with return(%d) for handle(0x%04x)\n",
+			    r, sas_device_priv_data->sas_target->handle);
+	}
+}
+
+/**
+ * _scsih_ublock_io_all_device - unblock every device
+ * @ioc: per adapter object
+ *
+ * change the device state from block to running
+ */
+static void
+_scsih_ublock_io_all_device(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_device *sdev;
+
+	shost_for_each_device(sdev, ioc->shost) {
+		sas_device_priv_data = sdev->hostdata;
+		if (!sas_device_priv_data)
+			continue;
+		if (!sas_device_priv_data->block)
+			continue;
+
+		dewtprintk(ioc, sdev_printk(KERN_INFO, sdev,
+			"device_running, handle(0x%04x)\n",
+		    sas_device_priv_data->sas_target->handle));
+		_scsih_internal_device_unblock(sdev, sas_device_priv_data);
+	}
+}
+
+
+/**
+ * _scsih_ublock_io_device - prepare device to be deleted
+ * @ioc: per adapter object
+ * @sas_address: sas address
+ * @port: hba port entry
+ *
+ * unblock then put device in offline state
+ */
+static void
+_scsih_ublock_io_device(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address, struct hba_port *port)
+{
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_device *sdev;
+
+	shost_for_each_device(sdev, ioc->shost) {
+		sas_device_priv_data = sdev->hostdata;
+		if (!sas_device_priv_data || !sas_device_priv_data->sas_target)
+			continue;
+		if (sas_device_priv_data->sas_target->sas_address
+		    != sas_address)
+			continue;
+		if (sas_device_priv_data->sas_target->port != port)
+			continue;
+		if (sas_device_priv_data->block)
+			_scsih_internal_device_unblock(sdev,
+				sas_device_priv_data);
+	}
+}
+
+/**
+ * _scsih_block_io_all_device - set the device state to SDEV_BLOCK
+ * @ioc: per adapter object
+ *
+ * During device pull we need to appropriately set the sdev state.
+ */
+static void
+_scsih_block_io_all_device(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_device *sdev;
+
+	shost_for_each_device(sdev, ioc->shost) {
+		sas_device_priv_data = sdev->hostdata;
+		if (!sas_device_priv_data)
+			continue;
+		if (sas_device_priv_data->block)
+			continue;
+		if (sas_device_priv_data->ignore_delay_remove) {
+			sdev_printk(KERN_INFO, sdev,
+			"%s skip device_block for SES handle(0x%04x)\n",
+			__func__, sas_device_priv_data->sas_target->handle);
+			continue;
+		}
+		_scsih_internal_device_block(sdev, sas_device_priv_data);
+	}
+}
+
+/**
+ * _scsih_block_io_device - set the device state to SDEV_BLOCK
+ * @ioc: per adapter object
+ * @handle: device handle
+ *
+ * During device pull we need to appropriately set the sdev state.
+ */
+static void
+_scsih_block_io_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_device *sdev;
+	struct _sas_device *sas_device;
+
+	sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
+
+	shost_for_each_device(sdev, ioc->shost) {
+		sas_device_priv_data = sdev->hostdata;
+		if (!sas_device_priv_data)
+			continue;
+		if (sas_device_priv_data->sas_target->handle != handle)
+			continue;
+		if (sas_device_priv_data->block)
+			continue;
+		if (sas_device && sas_device->pend_sas_rphy_add)
+			continue;
+		if (sas_device_priv_data->ignore_delay_remove) {
+			sdev_printk(KERN_INFO, sdev,
+			"%s skip device_block for SES handle(0x%04x)\n",
+			__func__, sas_device_priv_data->sas_target->handle);
+			continue;
+		}
+		_scsih_internal_device_block(sdev, sas_device_priv_data);
+	}
+
+	if (sas_device)
+		sas_device_put(sas_device);
+}
+
+/**
+ * _scsih_block_io_to_children_attached_to_ex
+ * @ioc: per adapter object
+ * @sas_expander: the sas_device object
+ *
+ * This routine set sdev state to SDEV_BLOCK for all devices
+ * attached to this expander. This function called when expander is
+ * pulled.
+ */
+static void
+_scsih_block_io_to_children_attached_to_ex(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_expander)
+{
+	struct _sas_port *mpt3sas_port;
+	struct _sas_device *sas_device;
+	struct _sas_node *expander_sibling;
+	unsigned long flags;
+
+	if (!sas_expander)
+		return;
+
+	list_for_each_entry(mpt3sas_port,
+	   &sas_expander->sas_port_list, port_list) {
+		if (mpt3sas_port->remote_identify.device_type ==
+		    SAS_END_DEVICE) {
+			spin_lock_irqsave(&ioc->sas_device_lock, flags);
+			sas_device = __mpt3sas_get_sdev_by_addr(ioc,
+			    mpt3sas_port->remote_identify.sas_address,
+			    mpt3sas_port->hba_port);
+			if (sas_device) {
+				set_bit(sas_device->handle,
+						ioc->blocking_handles);
+				sas_device_put(sas_device);
+			}
+			spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+		}
+	}
+
+	list_for_each_entry(mpt3sas_port,
+	   &sas_expander->sas_port_list, port_list) {
+
+		if (mpt3sas_port->remote_identify.device_type ==
+		    SAS_EDGE_EXPANDER_DEVICE ||
+		    mpt3sas_port->remote_identify.device_type ==
+		    SAS_FANOUT_EXPANDER_DEVICE) {
+			expander_sibling =
+			    mpt3sas_scsih_expander_find_by_sas_address(
+			    ioc, mpt3sas_port->remote_identify.sas_address,
+			    mpt3sas_port->hba_port);
+			_scsih_block_io_to_children_attached_to_ex(ioc,
+			    expander_sibling);
+		}
+	}
+}
+
+/**
+ * _scsih_block_io_to_children_attached_directly
+ * @ioc: per adapter object
+ * @event_data: topology change event data
+ *
+ * This routine set sdev state to SDEV_BLOCK for all devices
+ * direct attached during device pull.
+ */
+static void
+_scsih_block_io_to_children_attached_directly(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataSasTopologyChangeList_t *event_data)
+{
+	int i;
+	u16 handle;
+	u16 reason_code;
+
+	for (i = 0; i < event_data->NumEntries; i++) {
+		handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+		reason_code = event_data->PHY[i].PhyStatus &
+		    MPI2_EVENT_SAS_TOPO_RC_MASK;
+		if (reason_code == MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING)
+			_scsih_block_io_device(ioc, handle);
+	}
+}
+
+/**
+ * _scsih_block_io_to_pcie_children_attached_directly
+ * @ioc: per adapter object
+ * @event_data: topology change event data
+ *
+ * This routine set sdev state to SDEV_BLOCK for all devices
+ * direct attached during device pull/reconnect.
+ */
+static void
+_scsih_block_io_to_pcie_children_attached_directly(struct MPT3SAS_ADAPTER *ioc,
+		Mpi26EventDataPCIeTopologyChangeList_t *event_data)
+{
+	int i;
+	u16 handle;
+	u16 reason_code;
+
+	for (i = 0; i < event_data->NumEntries; i++) {
+		handle =
+			le16_to_cpu(event_data->PortEntry[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+		reason_code = event_data->PortEntry[i].PortStatus;
+		if (reason_code ==
+				MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING)
+			_scsih_block_io_device(ioc, handle);
+	}
+}
+/**
+ * _scsih_tm_tr_send - send task management request
+ * @ioc: per adapter object
+ * @handle: device handle
+ * Context: interrupt time.
+ *
+ * This code is to initiate the device removal handshake protocol
+ * with controller firmware.  This function will issue target reset
+ * using high priority request queue.  It will send a sas iounit
+ * control request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion.
+ *
+ * This is designed to send muliple task management request at the same
+ * time to the fifo. If the fifo is full, we will append the request,
+ * and process it in a future completion.
+ */
+static void
+_scsih_tm_tr_send(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	Mpi2SCSITaskManagementRequest_t *mpi_request;
+	u16 smid;
+	struct _sas_device *sas_device = NULL;
+	struct _pcie_device *pcie_device = NULL;
+	struct MPT3SAS_TARGET *sas_target_priv_data = NULL;
+	u64 sas_address = 0;
+	unsigned long flags;
+	struct _tr_list *delayed_tr;
+	u32 ioc_state;
+	u8 tr_method = 0;
+	struct hba_port *port = NULL;
+
+	if (ioc->pci_error_recovery) {
+		dewtprintk(ioc,
+			   ioc_info(ioc, "%s: host in pci error recovery: handle(0x%04x)\n",
+				    __func__, handle));
+		return;
+	}
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		dewtprintk(ioc,
+			   ioc_info(ioc, "%s: host is not operational: handle(0x%04x)\n",
+				    __func__, handle));
+		return;
+	}
+
+	/* if PD, then return */
+	if (test_bit(handle, ioc->pd_handles))
+		return;
+
+	clear_bit(handle, ioc->pend_os_device_add);
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
+	if (sas_device && sas_device->starget &&
+	    sas_device->starget->hostdata) {
+		sas_target_priv_data = sas_device->starget->hostdata;
+		sas_target_priv_data->deleted = 1;
+		sas_address = sas_device->sas_address;
+		port = sas_device->port;
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	if (!sas_device) {
+		spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+		pcie_device = __mpt3sas_get_pdev_by_handle(ioc, handle);
+		if (pcie_device && pcie_device->starget &&
+			pcie_device->starget->hostdata) {
+			sas_target_priv_data = pcie_device->starget->hostdata;
+			sas_target_priv_data->deleted = 1;
+			sas_address = pcie_device->wwid;
+		}
+		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+		if (pcie_device && (!ioc->tm_custom_handling) &&
+		    (!(mpt3sas_scsih_is_pcie_scsi_device(
+		    pcie_device->device_info))))
+			tr_method =
+			    MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE;
+		else
+			tr_method = MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET;
+	}
+	if (sas_target_priv_data) {
+		dewtprintk(ioc,
+			   ioc_info(ioc, "setting delete flag: handle(0x%04x), sas_addr(0x%016llx)\n",
+				    handle, (u64)sas_address));
+		if (sas_device) {
+			if (sas_device->enclosure_handle != 0)
+				dewtprintk(ioc,
+					   ioc_info(ioc, "setting delete flag:enclosure logical id(0x%016llx), slot(%d)\n",
+						    (u64)sas_device->enclosure_logical_id,
+						    sas_device->slot));
+			if (sas_device->connector_name[0] != '\0')
+				dewtprintk(ioc,
+					   ioc_info(ioc, "setting delete flag: enclosure level(0x%04x), connector name( %s)\n",
+						    sas_device->enclosure_level,
+						    sas_device->connector_name));
+		} else if (pcie_device) {
+			if (pcie_device->enclosure_handle != 0)
+				dewtprintk(ioc,
+					   ioc_info(ioc, "setting delete flag: logical id(0x%016llx), slot(%d)\n",
+						    (u64)pcie_device->enclosure_logical_id,
+						    pcie_device->slot));
+			if (pcie_device->connector_name[0] != '\0')
+				dewtprintk(ioc,
+					   ioc_info(ioc, "setting delete flag:, enclosure level(0x%04x), connector name( %s)\n",
+						    pcie_device->enclosure_level,
+						    pcie_device->connector_name));
+		}
+		_scsih_ublock_io_device(ioc, sas_address, port);
+		sas_target_priv_data->handle = MPT3SAS_INVALID_DEVICE_HANDLE;
+	}
+
+	smid = mpt3sas_base_get_smid_hpr(ioc, ioc->tm_tr_cb_idx);
+	if (!smid) {
+		delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
+		if (!delayed_tr)
+			goto out;
+		INIT_LIST_HEAD(&delayed_tr->list);
+		delayed_tr->handle = handle;
+		list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list);
+		dewtprintk(ioc,
+			   ioc_info(ioc, "DELAYED:tr:handle(0x%04x), (open)\n",
+				    handle));
+		goto out;
+	}
+
+	dewtprintk(ioc,
+		   ioc_info(ioc, "tr_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
+			    handle, smid, ioc->tm_tr_cb_idx));
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
+	mpi_request->DevHandle = cpu_to_le16(handle);
+	mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
+	mpi_request->MsgFlags = tr_method;
+	set_bit(handle, ioc->device_remove_in_progress);
+	ioc->put_smid_hi_priority(ioc, smid, 0);
+	mpt3sas_trigger_master(ioc, MASTER_TRIGGER_DEVICE_REMOVAL);
+
+out:
+	if (sas_device)
+		sas_device_put(sas_device);
+	if (pcie_device)
+		pcie_device_put(pcie_device);
+}
+
+/**
+ * _scsih_tm_tr_complete -
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: interrupt time.
+ *
+ * This is the target reset completion routine.
+ * This code is part of the code to initiate the device removal
+ * handshake protocol with controller firmware.
+ * It will send a sas iounit control request (MPI2_SAS_OP_REMOVE_DEVICE)
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *         0 means the mf is freed from this function.
+ */
+static u8
+_scsih_tm_tr_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply)
+{
+	u16 handle;
+	Mpi2SCSITaskManagementRequest_t *mpi_request_tm;
+	Mpi2SCSITaskManagementReply_t *mpi_reply =
+	    mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	Mpi2SasIoUnitControlRequest_t *mpi_request;
+	u16 smid_sas_ctrl;
+	u32 ioc_state;
+	struct _sc_list *delayed_sc;
+
+	if (ioc->pci_error_recovery) {
+		dewtprintk(ioc,
+			   ioc_info(ioc, "%s: host in pci error recovery\n",
+				    __func__));
+		return 1;
+	}
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		dewtprintk(ioc,
+			   ioc_info(ioc, "%s: host is not operational\n",
+				    __func__));
+		return 1;
+	}
+	if (unlikely(!mpi_reply)) {
+		ioc_err(ioc, "mpi_reply not valid at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return 1;
+	}
+	mpi_request_tm = mpt3sas_base_get_msg_frame(ioc, smid);
+	handle = le16_to_cpu(mpi_request_tm->DevHandle);
+	if (handle != le16_to_cpu(mpi_reply->DevHandle)) {
+		dewtprintk(ioc,
+			   ioc_err(ioc, "spurious interrupt: handle(0x%04x:0x%04x), smid(%d)!!!\n",
+				   handle,
+				   le16_to_cpu(mpi_reply->DevHandle), smid));
+		return 0;
+	}
+
+	mpt3sas_trigger_master(ioc, MASTER_TRIGGER_TASK_MANAGMENT);
+	dewtprintk(ioc,
+		   ioc_info(ioc, "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), loginfo(0x%08x), completed(%d)\n",
+			    handle, smid, le16_to_cpu(mpi_reply->IOCStatus),
+			    le32_to_cpu(mpi_reply->IOCLogInfo),
+			    le32_to_cpu(mpi_reply->TerminationCount)));
+
+	smid_sas_ctrl = mpt3sas_base_get_smid(ioc, ioc->tm_sas_control_cb_idx);
+	if (!smid_sas_ctrl) {
+		delayed_sc = kzalloc(sizeof(*delayed_sc), GFP_ATOMIC);
+		if (!delayed_sc)
+			return _scsih_check_for_pending_tm(ioc, smid);
+		INIT_LIST_HEAD(&delayed_sc->list);
+		delayed_sc->handle = le16_to_cpu(mpi_request_tm->DevHandle);
+		list_add_tail(&delayed_sc->list, &ioc->delayed_sc_list);
+		dewtprintk(ioc,
+			   ioc_info(ioc, "DELAYED:sc:handle(0x%04x), (open)\n",
+				    handle));
+		return _scsih_check_for_pending_tm(ioc, smid);
+	}
+
+	dewtprintk(ioc,
+		   ioc_info(ioc, "sc_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
+			    handle, smid_sas_ctrl, ioc->tm_sas_control_cb_idx));
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid_sas_ctrl);
+	memset(mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
+	mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE;
+	mpi_request->DevHandle = mpi_request_tm->DevHandle;
+	ioc->put_smid_default(ioc, smid_sas_ctrl);
+
+	return _scsih_check_for_pending_tm(ioc, smid);
+}
+
+/** _scsih_allow_scmd_to_device - check whether scmd needs to
+ *				 issue to IOC or not.
+ * @ioc: per adapter object
+ * @scmd: pointer to scsi command object
+ *
+ * Returns true if scmd can be issued to IOC otherwise returns false.
+ */
+inline bool _scsih_allow_scmd_to_device(struct MPT3SAS_ADAPTER *ioc,
+	struct scsi_cmnd *scmd)
+{
+
+	if (ioc->pci_error_recovery)
+		return false;
+
+	if (ioc->hba_mpi_version_belonged == MPI2_VERSION) {
+		if (ioc->remove_host)
+			return false;
+
+		return true;
+	}
+
+	if (ioc->remove_host) {
+
+		switch (scmd->cmnd[0]) {
+		case SYNCHRONIZE_CACHE:
+		case START_STOP:
+			return true;
+		default:
+			return false;
+		}
+	}
+
+	return true;
+}
+
+/**
+ * _scsih_sas_control_complete - completion routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: interrupt time.
+ *
+ * This is the sas iounit control completion routine.
+ * This code is part of the code to initiate the device removal
+ * handshake protocol with controller firmware.
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *         0 means the mf is freed from this function.
+ */
+static u8
+_scsih_sas_control_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u8 msix_index, u32 reply)
+{
+	Mpi2SasIoUnitControlReply_t *mpi_reply =
+	    mpt3sas_base_get_reply_virt_addr(ioc, reply);
+
+	if (likely(mpi_reply)) {
+		dewtprintk(ioc,
+			   ioc_info(ioc, "sc_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), loginfo(0x%08x)\n",
+				    le16_to_cpu(mpi_reply->DevHandle), smid,
+				    le16_to_cpu(mpi_reply->IOCStatus),
+				    le32_to_cpu(mpi_reply->IOCLogInfo)));
+		if (le16_to_cpu(mpi_reply->IOCStatus) ==
+		     MPI2_IOCSTATUS_SUCCESS) {
+			clear_bit(le16_to_cpu(mpi_reply->DevHandle),
+			    ioc->device_remove_in_progress);
+		}
+	} else {
+		ioc_err(ioc, "mpi_reply not valid at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+	}
+	return mpt3sas_check_for_pending_internal_cmds(ioc, smid);
+}
+
+/**
+ * _scsih_tm_tr_volume_send - send target reset request for volumes
+ * @ioc: per adapter object
+ * @handle: device handle
+ * Context: interrupt time.
+ *
+ * This is designed to send muliple task management request at the same
+ * time to the fifo. If the fifo is full, we will append the request,
+ * and process it in a future completion.
+ */
+static void
+_scsih_tm_tr_volume_send(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	Mpi2SCSITaskManagementRequest_t *mpi_request;
+	u16 smid;
+	struct _tr_list *delayed_tr;
+
+	if (ioc->pci_error_recovery) {
+		dewtprintk(ioc,
+			   ioc_info(ioc, "%s: host reset in progress!\n",
+				    __func__));
+		return;
+	}
+
+	smid = mpt3sas_base_get_smid_hpr(ioc, ioc->tm_tr_volume_cb_idx);
+	if (!smid) {
+		delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
+		if (!delayed_tr)
+			return;
+		INIT_LIST_HEAD(&delayed_tr->list);
+		delayed_tr->handle = handle;
+		list_add_tail(&delayed_tr->list, &ioc->delayed_tr_volume_list);
+		dewtprintk(ioc,
+			   ioc_info(ioc, "DELAYED:tr:handle(0x%04x), (open)\n",
+				    handle));
+		return;
+	}
+
+	dewtprintk(ioc,
+		   ioc_info(ioc, "tr_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
+			    handle, smid, ioc->tm_tr_volume_cb_idx));
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
+	mpi_request->DevHandle = cpu_to_le16(handle);
+	mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
+	ioc->put_smid_hi_priority(ioc, smid, 0);
+}
+
+/**
+ * _scsih_tm_volume_tr_complete - target reset completion
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: interrupt time.
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *         0 means the mf is freed from this function.
+ */
+static u8
+_scsih_tm_volume_tr_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u8 msix_index, u32 reply)
+{
+	u16 handle;
+	Mpi2SCSITaskManagementRequest_t *mpi_request_tm;
+	Mpi2SCSITaskManagementReply_t *mpi_reply =
+	    mpt3sas_base_get_reply_virt_addr(ioc, reply);
+
+	if (ioc->shost_recovery || ioc->pci_error_recovery) {
+		dewtprintk(ioc,
+			   ioc_info(ioc, "%s: host reset in progress!\n",
+				    __func__));
+		return 1;
+	}
+	if (unlikely(!mpi_reply)) {
+		ioc_err(ioc, "mpi_reply not valid at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return 1;
+	}
+
+	mpi_request_tm = mpt3sas_base_get_msg_frame(ioc, smid);
+	handle = le16_to_cpu(mpi_request_tm->DevHandle);
+	if (handle != le16_to_cpu(mpi_reply->DevHandle)) {
+		dewtprintk(ioc,
+			   ioc_err(ioc, "spurious interrupt: handle(0x%04x:0x%04x), smid(%d)!!!\n",
+				   handle, le16_to_cpu(mpi_reply->DevHandle),
+				   smid));
+		return 0;
+	}
+
+	dewtprintk(ioc,
+		   ioc_info(ioc, "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), loginfo(0x%08x), completed(%d)\n",
+			    handle, smid, le16_to_cpu(mpi_reply->IOCStatus),
+			    le32_to_cpu(mpi_reply->IOCLogInfo),
+			    le32_to_cpu(mpi_reply->TerminationCount)));
+
+	return _scsih_check_for_pending_tm(ioc, smid);
+}
+
+/**
+ * _scsih_issue_delayed_event_ack - issue delayed Event ACK messages
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @event: Event ID
+ * @event_context: used to track events uniquely
+ *
+ * Context - processed in interrupt context.
+ */
+static void
+_scsih_issue_delayed_event_ack(struct MPT3SAS_ADAPTER *ioc, u16 smid, U16 event,
+				U32 event_context)
+{
+	Mpi2EventAckRequest_t *ack_request;
+	int i = smid - ioc->internal_smid;
+	unsigned long flags;
+
+	/* Without releasing the smid just update the
+	 * call back index and reuse the same smid for
+	 * processing this delayed request
+	 */
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	ioc->internal_lookup[i].cb_idx = ioc->base_cb_idx;
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+
+	dewtprintk(ioc,
+		   ioc_info(ioc, "EVENT ACK: event(0x%04x), smid(%d), cb(%d)\n",
+			    le16_to_cpu(event), smid, ioc->base_cb_idx));
+	ack_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	memset(ack_request, 0, sizeof(Mpi2EventAckRequest_t));
+	ack_request->Function = MPI2_FUNCTION_EVENT_ACK;
+	ack_request->Event = event;
+	ack_request->EventContext = event_context;
+	ack_request->VF_ID = 0;  /* TODO */
+	ack_request->VP_ID = 0;
+	ioc->put_smid_default(ioc, smid);
+}
+
+/**
+ * _scsih_issue_delayed_sas_io_unit_ctrl - issue delayed
+ *				sas_io_unit_ctrl messages
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @handle: device handle
+ *
+ * Context - processed in interrupt context.
+ */
+static void
+_scsih_issue_delayed_sas_io_unit_ctrl(struct MPT3SAS_ADAPTER *ioc,
+					u16 smid, u16 handle)
+{
+	Mpi2SasIoUnitControlRequest_t *mpi_request;
+	u32 ioc_state;
+	int i = smid - ioc->internal_smid;
+	unsigned long flags;
+
+	if (ioc->remove_host) {
+		dewtprintk(ioc,
+			   ioc_info(ioc, "%s: host has been removed\n",
+				    __func__));
+		return;
+	} else if (ioc->pci_error_recovery) {
+		dewtprintk(ioc,
+			   ioc_info(ioc, "%s: host in pci error recovery\n",
+				    __func__));
+		return;
+	}
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		dewtprintk(ioc,
+			   ioc_info(ioc, "%s: host is not operational\n",
+				    __func__));
+		return;
+	}
+
+	/* Without releasing the smid just update the
+	 * call back index and reuse the same smid for
+	 * processing this delayed request
+	 */
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	ioc->internal_lookup[i].cb_idx = ioc->tm_sas_control_cb_idx;
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+
+	dewtprintk(ioc,
+		   ioc_info(ioc, "sc_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
+			    handle, smid, ioc->tm_sas_control_cb_idx));
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	memset(mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
+	mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE;
+	mpi_request->DevHandle = cpu_to_le16(handle);
+	ioc->put_smid_default(ioc, smid);
+}
+
+/**
+ * mpt3sas_check_for_pending_internal_cmds - check for pending internal messages
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Context: Executed in interrupt context
+ *
+ * This will check delayed internal messages list, and process the
+ * next request.
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *         0 means the mf is freed from this function.
+ */
+u8
+mpt3sas_check_for_pending_internal_cmds(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	struct _sc_list *delayed_sc;
+	struct _event_ack_list *delayed_event_ack;
+
+	if (!list_empty(&ioc->delayed_event_ack_list)) {
+		delayed_event_ack = list_entry(ioc->delayed_event_ack_list.next,
+						struct _event_ack_list, list);
+		_scsih_issue_delayed_event_ack(ioc, smid,
+		  delayed_event_ack->Event, delayed_event_ack->EventContext);
+		list_del(&delayed_event_ack->list);
+		kfree(delayed_event_ack);
+		return 0;
+	}
+
+	if (!list_empty(&ioc->delayed_sc_list)) {
+		delayed_sc = list_entry(ioc->delayed_sc_list.next,
+						struct _sc_list, list);
+		_scsih_issue_delayed_sas_io_unit_ctrl(ioc, smid,
+						 delayed_sc->handle);
+		list_del(&delayed_sc->list);
+		kfree(delayed_sc);
+		return 0;
+	}
+	return 1;
+}
+
+/**
+ * _scsih_check_for_pending_tm - check for pending task management
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * This will check delayed target reset list, and feed the
+ * next reqeust.
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *         0 means the mf is freed from this function.
+ */
+static u8
+_scsih_check_for_pending_tm(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	struct _tr_list *delayed_tr;
+
+	if (!list_empty(&ioc->delayed_tr_volume_list)) {
+		delayed_tr = list_entry(ioc->delayed_tr_volume_list.next,
+		    struct _tr_list, list);
+		mpt3sas_base_free_smid(ioc, smid);
+		_scsih_tm_tr_volume_send(ioc, delayed_tr->handle);
+		list_del(&delayed_tr->list);
+		kfree(delayed_tr);
+		return 0;
+	}
+
+	if (!list_empty(&ioc->delayed_tr_list)) {
+		delayed_tr = list_entry(ioc->delayed_tr_list.next,
+		    struct _tr_list, list);
+		mpt3sas_base_free_smid(ioc, smid);
+		_scsih_tm_tr_send(ioc, delayed_tr->handle);
+		list_del(&delayed_tr->list);
+		kfree(delayed_tr);
+		return 0;
+	}
+
+	return 1;
+}
+
+/**
+ * _scsih_check_topo_delete_events - sanity check on topo events
+ * @ioc: per adapter object
+ * @event_data: the event data payload
+ *
+ * This routine added to better handle cable breaker.
+ *
+ * This handles the case where driver receives multiple expander
+ * add and delete events in a single shot.  When there is a delete event
+ * the routine will void any pending add events waiting in the event queue.
+ */
+static void
+_scsih_check_topo_delete_events(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataSasTopologyChangeList_t *event_data)
+{
+	struct fw_event_work *fw_event;
+	Mpi2EventDataSasTopologyChangeList_t *local_event_data;
+	u16 expander_handle;
+	struct _sas_node *sas_expander;
+	unsigned long flags;
+	int i, reason_code;
+	u16 handle;
+
+	for (i = 0 ; i < event_data->NumEntries; i++) {
+		handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+		reason_code = event_data->PHY[i].PhyStatus &
+		    MPI2_EVENT_SAS_TOPO_RC_MASK;
+		if (reason_code == MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING)
+			_scsih_tm_tr_send(ioc, handle);
+	}
+
+	expander_handle = le16_to_cpu(event_data->ExpanderDevHandle);
+	if (expander_handle < ioc->sas_hba.num_phys) {
+		_scsih_block_io_to_children_attached_directly(ioc, event_data);
+		return;
+	}
+	if (event_data->ExpStatus ==
+	    MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING) {
+		/* put expander attached devices into blocking state */
+		spin_lock_irqsave(&ioc->sas_node_lock, flags);
+		sas_expander = mpt3sas_scsih_expander_find_by_handle(ioc,
+		    expander_handle);
+		_scsih_block_io_to_children_attached_to_ex(ioc, sas_expander);
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		do {
+			handle = find_first_bit(ioc->blocking_handles,
+			    ioc->facts.MaxDevHandle);
+			if (handle < ioc->facts.MaxDevHandle)
+				_scsih_block_io_device(ioc, handle);
+		} while (test_and_clear_bit(handle, ioc->blocking_handles));
+	} else if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_RESPONDING)
+		_scsih_block_io_to_children_attached_directly(ioc, event_data);
+
+	if (event_data->ExpStatus != MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING)
+		return;
+
+	/* mark ignore flag for pending events */
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	list_for_each_entry(fw_event, &ioc->fw_event_list, list) {
+		if (fw_event->event != MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST ||
+		    fw_event->ignore)
+			continue;
+		local_event_data = (Mpi2EventDataSasTopologyChangeList_t *)
+				   fw_event->event_data;
+		if (local_event_data->ExpStatus ==
+		    MPI2_EVENT_SAS_TOPO_ES_ADDED ||
+		    local_event_data->ExpStatus ==
+		    MPI2_EVENT_SAS_TOPO_ES_RESPONDING) {
+			if (le16_to_cpu(local_event_data->ExpanderDevHandle) ==
+			    expander_handle) {
+				dewtprintk(ioc,
+					   ioc_info(ioc, "setting ignoring flag\n"));
+				fw_event->ignore = 1;
+			}
+		}
+	}
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/**
+ * _scsih_check_pcie_topo_remove_events - sanity check on topo
+ * events
+ * @ioc: per adapter object
+ * @event_data: the event data payload
+ *
+ * This handles the case where driver receives multiple switch
+ * or device add and delete events in a single shot.  When there
+ * is a delete event the routine will void any pending add
+ * events waiting in the event queue.
+ */
+static void
+_scsih_check_pcie_topo_remove_events(struct MPT3SAS_ADAPTER *ioc,
+	Mpi26EventDataPCIeTopologyChangeList_t *event_data)
+{
+	struct fw_event_work *fw_event;
+	Mpi26EventDataPCIeTopologyChangeList_t *local_event_data;
+	unsigned long flags;
+	int i, reason_code;
+	u16 handle, switch_handle;
+
+	for (i = 0; i < event_data->NumEntries; i++) {
+		handle =
+			le16_to_cpu(event_data->PortEntry[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+		reason_code = event_data->PortEntry[i].PortStatus;
+		if (reason_code == MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING)
+			_scsih_tm_tr_send(ioc, handle);
+	}
+
+	switch_handle = le16_to_cpu(event_data->SwitchDevHandle);
+	if (!switch_handle) {
+		_scsih_block_io_to_pcie_children_attached_directly(
+							ioc, event_data);
+		return;
+	}
+    /* TODO We are not supporting cascaded PCIe Switch removal yet*/
+	if ((event_data->SwitchStatus
+		== MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING) ||
+		(event_data->SwitchStatus ==
+					MPI26_EVENT_PCIE_TOPO_SS_RESPONDING))
+		_scsih_block_io_to_pcie_children_attached_directly(
+							ioc, event_data);
+
+	if (event_data->SwitchStatus != MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING)
+		return;
+
+	/* mark ignore flag for pending events */
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	list_for_each_entry(fw_event, &ioc->fw_event_list, list) {
+		if (fw_event->event != MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST ||
+			fw_event->ignore)
+			continue;
+		local_event_data =
+			(Mpi26EventDataPCIeTopologyChangeList_t *)
+			fw_event->event_data;
+		if (local_event_data->SwitchStatus ==
+		    MPI2_EVENT_SAS_TOPO_ES_ADDED ||
+		    local_event_data->SwitchStatus ==
+		    MPI2_EVENT_SAS_TOPO_ES_RESPONDING) {
+			if (le16_to_cpu(local_event_data->SwitchDevHandle) ==
+				switch_handle) {
+				dewtprintk(ioc,
+					   ioc_info(ioc, "setting ignoring flag for switch event\n"));
+				fw_event->ignore = 1;
+			}
+		}
+	}
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/**
+ * _scsih_set_volume_delete_flag - setting volume delete flag
+ * @ioc: per adapter object
+ * @handle: device handle
+ *
+ * This returns nothing.
+ */
+static void
+_scsih_set_volume_delete_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _raid_device *raid_device;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
+	if (raid_device && raid_device->starget &&
+	    raid_device->starget->hostdata) {
+		sas_target_priv_data =
+		    raid_device->starget->hostdata;
+		sas_target_priv_data->deleted = 1;
+		dewtprintk(ioc,
+			   ioc_info(ioc, "setting delete flag: handle(0x%04x), wwid(0x%016llx)\n",
+				    handle, (u64)raid_device->wwid));
+	}
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+}
+
+/**
+ * _scsih_set_volume_handle_for_tr - set handle for target reset to volume
+ * @handle: input handle
+ * @a: handle for volume a
+ * @b: handle for volume b
+ *
+ * IR firmware only supports two raid volumes.  The purpose of this
+ * routine is to set the volume handle in either a or b. When the given
+ * input handle is non-zero, or when a and b have not been set before.
+ */
+static void
+_scsih_set_volume_handle_for_tr(u16 handle, u16 *a, u16 *b)
+{
+	if (!handle || handle == *a || handle == *b)
+		return;
+	if (!*a)
+		*a = handle;
+	else if (!*b)
+		*b = handle;
+}
+
+/**
+ * _scsih_check_ir_config_unhide_events - check for UNHIDE events
+ * @ioc: per adapter object
+ * @event_data: the event data payload
+ * Context: interrupt time.
+ *
+ * This routine will send target reset to volume, followed by target
+ * resets to the PDs. This is called when a PD has been removed, or
+ * volume has been deleted or removed. When the target reset is sent
+ * to volume, the PD target resets need to be queued to start upon
+ * completion of the volume target reset.
+ */
+static void
+_scsih_check_ir_config_unhide_events(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataIrConfigChangeList_t *event_data)
+{
+	Mpi2EventIrConfigElement_t *element;
+	int i;
+	u16 handle, volume_handle, a, b;
+	struct _tr_list *delayed_tr;
+
+	a = 0;
+	b = 0;
+
+	if (ioc->is_warpdrive)
+		return;
+
+	/* Volume Resets for Deleted or Removed */
+	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
+	for (i = 0; i < event_data->NumElements; i++, element++) {
+		if (le32_to_cpu(event_data->Flags) &
+		    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
+			continue;
+		if (element->ReasonCode ==
+		    MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED ||
+		    element->ReasonCode ==
+		    MPI2_EVENT_IR_CHANGE_RC_REMOVED) {
+			volume_handle = le16_to_cpu(element->VolDevHandle);
+			_scsih_set_volume_delete_flag(ioc, volume_handle);
+			_scsih_set_volume_handle_for_tr(volume_handle, &a, &b);
+		}
+	}
+
+	/* Volume Resets for UNHIDE events */
+	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
+	for (i = 0; i < event_data->NumElements; i++, element++) {
+		if (le32_to_cpu(event_data->Flags) &
+		    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
+			continue;
+		if (element->ReasonCode == MPI2_EVENT_IR_CHANGE_RC_UNHIDE) {
+			volume_handle = le16_to_cpu(element->VolDevHandle);
+			_scsih_set_volume_handle_for_tr(volume_handle, &a, &b);
+		}
+	}
+
+	if (a)
+		_scsih_tm_tr_volume_send(ioc, a);
+	if (b)
+		_scsih_tm_tr_volume_send(ioc, b);
+
+	/* PD target resets */
+	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
+	for (i = 0; i < event_data->NumElements; i++, element++) {
+		if (element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_UNHIDE)
+			continue;
+		handle = le16_to_cpu(element->PhysDiskDevHandle);
+		volume_handle = le16_to_cpu(element->VolDevHandle);
+		clear_bit(handle, ioc->pd_handles);
+		if (!volume_handle)
+			_scsih_tm_tr_send(ioc, handle);
+		else if (volume_handle == a || volume_handle == b) {
+			delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
+			BUG_ON(!delayed_tr);
+			INIT_LIST_HEAD(&delayed_tr->list);
+			delayed_tr->handle = handle;
+			list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list);
+			dewtprintk(ioc,
+				   ioc_info(ioc, "DELAYED:tr:handle(0x%04x), (open)\n",
+					    handle));
+		} else
+			_scsih_tm_tr_send(ioc, handle);
+	}
+}
+
+
+/**
+ * _scsih_check_volume_delete_events - set delete flag for volumes
+ * @ioc: per adapter object
+ * @event_data: the event data payload
+ * Context: interrupt time.
+ *
+ * This will handle the case when the cable connected to entire volume is
+ * pulled. We will take care of setting the deleted flag so normal IO will
+ * not be sent.
+ */
+static void
+_scsih_check_volume_delete_events(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataIrVolume_t *event_data)
+{
+	u32 state;
+
+	if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
+		return;
+	state = le32_to_cpu(event_data->NewValue);
+	if (state == MPI2_RAID_VOL_STATE_MISSING || state ==
+	    MPI2_RAID_VOL_STATE_FAILED)
+		_scsih_set_volume_delete_flag(ioc,
+		    le16_to_cpu(event_data->VolDevHandle));
+}
+
+/**
+ * _scsih_temp_threshold_events - display temperature threshold exceeded events
+ * @ioc: per adapter object
+ * @event_data: the temp threshold event data
+ * Context: interrupt time.
+ */
+static void
+_scsih_temp_threshold_events(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataTemperature_t *event_data)
+{
+	u32 doorbell;
+	if (ioc->temp_sensors_count >= event_data->SensorNum) {
+		ioc_err(ioc, "Temperature Threshold flags %s%s%s%s exceeded for Sensor: %d !!!\n",
+			le16_to_cpu(event_data->Status) & 0x1 ? "0 " : " ",
+			le16_to_cpu(event_data->Status) & 0x2 ? "1 " : " ",
+			le16_to_cpu(event_data->Status) & 0x4 ? "2 " : " ",
+			le16_to_cpu(event_data->Status) & 0x8 ? "3 " : " ",
+			event_data->SensorNum);
+		ioc_err(ioc, "Current Temp In Celsius: %d\n",
+			event_data->CurrentTemperature);
+		if (ioc->hba_mpi_version_belonged != MPI2_VERSION) {
+			doorbell = mpt3sas_base_get_iocstate(ioc, 0);
+			if ((doorbell & MPI2_IOC_STATE_MASK) ==
+			    MPI2_IOC_STATE_FAULT) {
+				mpt3sas_print_fault_code(ioc,
+				    doorbell & MPI2_DOORBELL_DATA_MASK);
+			} else if ((doorbell & MPI2_IOC_STATE_MASK) ==
+			    MPI2_IOC_STATE_COREDUMP) {
+				mpt3sas_print_coredump_info(ioc,
+				    doorbell & MPI2_DOORBELL_DATA_MASK);
+			}
+		}
+	}
+}
+
+static int _scsih_set_satl_pending(struct scsi_cmnd *scmd, bool pending)
+{
+	struct MPT3SAS_DEVICE *priv = scmd->device->hostdata;
+
+	if (scmd->cmnd[0] != ATA_12 && scmd->cmnd[0] != ATA_16)
+		return 0;
+
+	if (pending)
+		return test_and_set_bit(0, &priv->ata_command_pending);
+
+	clear_bit(0, &priv->ata_command_pending);
+	return 0;
+}
+
+/**
+ * _scsih_flush_running_cmds - completing outstanding commands.
+ * @ioc: per adapter object
+ *
+ * The flushing out of all pending scmd commands following host reset,
+ * where all IO is dropped to the floor.
+ */
+static void
+_scsih_flush_running_cmds(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct scsi_cmnd *scmd;
+	struct scsiio_tracker *st;
+	u16 smid;
+	int count = 0;
+
+	for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
+		scmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid);
+		if (!scmd)
+			continue;
+		count++;
+		_scsih_set_satl_pending(scmd, false);
+		st = scsi_cmd_priv(scmd);
+		mpt3sas_base_clear_st(ioc, st);
+		scsi_dma_unmap(scmd);
+		if (ioc->pci_error_recovery || ioc->remove_host)
+			scmd->result = DID_NO_CONNECT << 16;
+		else
+			scmd->result = DID_RESET << 16;
+		scsi_done(scmd);
+	}
+	dtmprintk(ioc, ioc_info(ioc, "completing %d cmds\n", count));
+}
+
+/**
+ * _scsih_setup_eedp - setup MPI request for EEDP transfer
+ * @ioc: per adapter object
+ * @scmd: pointer to scsi command object
+ * @mpi_request: pointer to the SCSI_IO request message frame
+ *
+ * Supporting protection 1 and 3.
+ */
+static void
+_scsih_setup_eedp(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
+	Mpi25SCSIIORequest_t *mpi_request)
+{
+	u16 eedp_flags;
+	Mpi25SCSIIORequest_t *mpi_request_3v =
+	   (Mpi25SCSIIORequest_t *)mpi_request;
+
+	switch (scsi_get_prot_op(scmd)) {
+	case SCSI_PROT_READ_STRIP:
+		eedp_flags = MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP;
+		break;
+	case SCSI_PROT_WRITE_INSERT:
+		eedp_flags = MPI2_SCSIIO_EEDPFLAGS_INSERT_OP;
+		break;
+	default:
+		return;
+	}
+
+	if (scmd->prot_flags & SCSI_PROT_GUARD_CHECK)
+		eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
+
+	if (scmd->prot_flags & SCSI_PROT_REF_CHECK)
+		eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG;
+
+	if (scmd->prot_flags & SCSI_PROT_REF_INCREMENT) {
+		eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG;
+
+		mpi_request->CDB.EEDP32.PrimaryReferenceTag =
+			cpu_to_be32(scsi_prot_ref_tag(scmd));
+	}
+
+	mpi_request_3v->EEDPBlockSize = cpu_to_le16(scsi_prot_interval(scmd));
+
+	if (ioc->is_gen35_ioc)
+		eedp_flags |= MPI25_SCSIIO_EEDPFLAGS_APPTAG_DISABLE_MODE;
+	mpi_request->EEDPFlags = cpu_to_le16(eedp_flags);
+}
+
+/**
+ * _scsih_eedp_error_handling - return sense code for EEDP errors
+ * @scmd: pointer to scsi command object
+ * @ioc_status: ioc status
+ */
+static void
+_scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status)
+{
+	u8 ascq;
+
+	switch (ioc_status) {
+	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+		ascq = 0x01;
+		break;
+	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+		ascq = 0x02;
+		break;
+	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+		ascq = 0x03;
+		break;
+	default:
+		ascq = 0x00;
+		break;
+	}
+	scsi_build_sense(scmd, 0, ILLEGAL_REQUEST, 0x10, ascq);
+	set_host_byte(scmd, DID_ABORT);
+}
+
+/**
+ * scsih_qcmd - main scsi request entry point
+ * @shost: SCSI host pointer
+ * @scmd: pointer to scsi command object
+ *
+ * The callback index is set inside `ioc->scsi_io_cb_idx`.
+ *
+ * Return: 0 on success.  If there's a failure, return either:
+ * SCSI_MLQUEUE_DEVICE_BUSY if the device queue is full, or
+ * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
+ */
+static int
+scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct _raid_device *raid_device;
+	struct request *rq = scsi_cmd_to_rq(scmd);
+	int class;
+	Mpi25SCSIIORequest_t *mpi_request;
+	struct _pcie_device *pcie_device = NULL;
+	u32 mpi_control;
+	u16 smid;
+	u16 handle;
+
+	if (ioc->logging_level & MPT_DEBUG_SCSI)
+		scsi_print_command(scmd);
+
+	sas_device_priv_data = scmd->device->hostdata;
+	if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
+		scmd->result = DID_NO_CONNECT << 16;
+		scsi_done(scmd);
+		return 0;
+	}
+
+	if (!(_scsih_allow_scmd_to_device(ioc, scmd))) {
+		scmd->result = DID_NO_CONNECT << 16;
+		scsi_done(scmd);
+		return 0;
+	}
+
+	sas_target_priv_data = sas_device_priv_data->sas_target;
+
+	/* invalid device handle */
+	handle = sas_target_priv_data->handle;
+
+	/*
+	 * Avoid error handling escallation when device is disconnected
+	 */
+	if (handle == MPT3SAS_INVALID_DEVICE_HANDLE || sas_device_priv_data->block) {
+		if (scmd->device->host->shost_state == SHOST_RECOVERY &&
+		    scmd->cmnd[0] == TEST_UNIT_READY) {
+			scsi_build_sense(scmd, 0, UNIT_ATTENTION, 0x29, 0x07);
+			scsi_done(scmd);
+			return 0;
+		}
+	}
+
+	if (handle == MPT3SAS_INVALID_DEVICE_HANDLE) {
+		scmd->result = DID_NO_CONNECT << 16;
+		scsi_done(scmd);
+		return 0;
+	}
+
+
+	if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress) {
+		/* host recovery or link resets sent via IOCTLs */
+		return SCSI_MLQUEUE_HOST_BUSY;
+	} else if (sas_target_priv_data->deleted) {
+		/* device has been deleted */
+		scmd->result = DID_NO_CONNECT << 16;
+		scsi_done(scmd);
+		return 0;
+	} else if (sas_target_priv_data->tm_busy ||
+		   sas_device_priv_data->block) {
+		/* device busy with task management */
+		return SCSI_MLQUEUE_DEVICE_BUSY;
+	}
+
+	/*
+	 * Bug work around for firmware SATL handling.  The loop
+	 * is based on atomic operations and ensures consistency
+	 * since we're lockless at this point
+	 */
+	do {
+		if (test_bit(0, &sas_device_priv_data->ata_command_pending))
+			return SCSI_MLQUEUE_DEVICE_BUSY;
+	} while (_scsih_set_satl_pending(scmd, true));
+
+	if (scmd->sc_data_direction == DMA_FROM_DEVICE)
+		mpi_control = MPI2_SCSIIO_CONTROL_READ;
+	else if (scmd->sc_data_direction == DMA_TO_DEVICE)
+		mpi_control = MPI2_SCSIIO_CONTROL_WRITE;
+	else
+		mpi_control = MPI2_SCSIIO_CONTROL_NODATATRANSFER;
+
+	/* set tags */
+	mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
+	/* NCQ Prio supported, make sure control indicated high priority */
+	if (sas_device_priv_data->ncq_prio_enable) {
+		class = IOPRIO_PRIO_CLASS(req_get_ioprio(rq));
+		if (class == IOPRIO_CLASS_RT)
+			mpi_control |= 1 << MPI2_SCSIIO_CONTROL_CMDPRI_SHIFT;
+	}
+	/* Make sure Device is not raid volume.
+	 * We do not expose raid functionality to upper layer for warpdrive.
+	 */
+	if (((!ioc->is_warpdrive && !scsih_is_raid(&scmd->device->sdev_gendev))
+		&& !scsih_is_nvme(&scmd->device->sdev_gendev))
+		&& sas_is_tlr_enabled(scmd->device) && scmd->cmd_len != 32)
+		mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON;
+
+	smid = mpt3sas_base_get_smid_scsiio(ioc, ioc->scsi_io_cb_idx, scmd);
+	if (!smid) {
+		ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
+		_scsih_set_satl_pending(scmd, false);
+		goto out;
+	}
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	memset(mpi_request, 0, ioc->request_sz);
+	_scsih_setup_eedp(ioc, scmd, mpi_request);
+
+	if (scmd->cmd_len == 32)
+		mpi_control |= 4 << MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT;
+	mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
+	if (sas_device_priv_data->sas_target->flags &
+	    MPT_TARGET_FLAGS_RAID_COMPONENT)
+		mpi_request->Function = MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
+	else
+		mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
+	mpi_request->DevHandle = cpu_to_le16(handle);
+	mpi_request->DataLength = cpu_to_le32(scsi_bufflen(scmd));
+	mpi_request->Control = cpu_to_le32(mpi_control);
+	mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len);
+	mpi_request->MsgFlags = MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR;
+	mpi_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
+	mpi_request->SenseBufferLowAddress =
+	    mpt3sas_base_get_sense_buffer_dma(ioc, smid);
+	mpi_request->SGLOffset0 = offsetof(Mpi25SCSIIORequest_t, SGL) / 4;
+	int_to_scsilun(sas_device_priv_data->lun, (struct scsi_lun *)
+	    mpi_request->LUN);
+	memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
+
+	if (mpi_request->DataLength) {
+		pcie_device = sas_target_priv_data->pcie_dev;
+		if (ioc->build_sg_scmd(ioc, scmd, smid, pcie_device)) {
+			mpt3sas_base_free_smid(ioc, smid);
+			_scsih_set_satl_pending(scmd, false);
+			goto out;
+		}
+	} else
+		ioc->build_zero_len_sge(ioc, &mpi_request->SGL);
+
+	raid_device = sas_target_priv_data->raid_device;
+	if (raid_device && raid_device->direct_io_enabled)
+		mpt3sas_setup_direct_io(ioc, scmd,
+			raid_device, mpi_request);
+
+	if (likely(mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)) {
+		if (sas_target_priv_data->flags & MPT_TARGET_FASTPATH_IO) {
+			mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len |
+			    MPI25_SCSIIO_IOFLAGS_FAST_PATH);
+			ioc->put_smid_fast_path(ioc, smid, handle);
+		} else
+			ioc->put_smid_scsi_io(ioc, smid,
+			    le16_to_cpu(mpi_request->DevHandle));
+	} else
+		ioc->put_smid_default(ioc, smid);
+	return 0;
+
+ out:
+	return SCSI_MLQUEUE_HOST_BUSY;
+}
+
+/**
+ * _scsih_normalize_sense - normalize descriptor and fixed format sense data
+ * @sense_buffer: sense data returned by target
+ * @data: normalized skey/asc/ascq
+ */
+static void
+_scsih_normalize_sense(char *sense_buffer, struct sense_info *data)
+{
+	if ((sense_buffer[0] & 0x7F) >= 0x72) {
+		/* descriptor format */
+		data->skey = sense_buffer[1] & 0x0F;
+		data->asc = sense_buffer[2];
+		data->ascq = sense_buffer[3];
+	} else {
+		/* fixed format */
+		data->skey = sense_buffer[2] & 0x0F;
+		data->asc = sense_buffer[12];
+		data->ascq = sense_buffer[13];
+	}
+}
+
+/**
+ * _scsih_scsi_ioc_info - translated non-successful SCSI_IO request
+ * @ioc: per adapter object
+ * @scmd: pointer to scsi command object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @smid: ?
+ *
+ * scsi_status - SCSI Status code returned from target device
+ * scsi_state - state info associated with SCSI_IO determined by ioc
+ * ioc_status - ioc supplied status info
+ */
+static void
+_scsih_scsi_ioc_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
+	Mpi2SCSIIOReply_t *mpi_reply, u16 smid)
+{
+	u32 response_info;
+	u8 *response_bytes;
+	u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	u8 scsi_state = mpi_reply->SCSIState;
+	u8 scsi_status = mpi_reply->SCSIStatus;
+	char *desc_ioc_state = NULL;
+	char *desc_scsi_status = NULL;
+	char *desc_scsi_state = ioc->tmp_string;
+	u32 log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
+	struct _sas_device *sas_device = NULL;
+	struct _pcie_device *pcie_device = NULL;
+	struct scsi_target *starget = scmd->device->sdev_target;
+	struct MPT3SAS_TARGET *priv_target = starget->hostdata;
+	char *device_str = NULL;
+
+	if (!priv_target)
+		return;
+	if (ioc->hide_ir_msg)
+		device_str = "WarpDrive";
+	else
+		device_str = "volume";
+
+	if (log_info == 0x31170000)
+		return;
+
+	switch (ioc_status) {
+	case MPI2_IOCSTATUS_SUCCESS:
+		desc_ioc_state = "success";
+		break;
+	case MPI2_IOCSTATUS_INVALID_FUNCTION:
+		desc_ioc_state = "invalid function";
+		break;
+	case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
+		desc_ioc_state = "scsi recovered error";
+		break;
+	case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE:
+		desc_ioc_state = "scsi invalid dev handle";
+		break;
+	case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
+		desc_ioc_state = "scsi device not there";
+		break;
+	case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
+		desc_ioc_state = "scsi data overrun";
+		break;
+	case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
+		desc_ioc_state = "scsi data underrun";
+		break;
+	case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
+		desc_ioc_state = "scsi io data error";
+		break;
+	case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
+		desc_ioc_state = "scsi protocol error";
+		break;
+	case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
+		desc_ioc_state = "scsi task terminated";
+		break;
+	case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
+		desc_ioc_state = "scsi residual mismatch";
+		break;
+	case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
+		desc_ioc_state = "scsi task mgmt failed";
+		break;
+	case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
+		desc_ioc_state = "scsi ioc terminated";
+		break;
+	case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
+		desc_ioc_state = "scsi ext terminated";
+		break;
+	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+		desc_ioc_state = "eedp guard error";
+		break;
+	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+		desc_ioc_state = "eedp ref tag error";
+		break;
+	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+		desc_ioc_state = "eedp app tag error";
+		break;
+	case MPI2_IOCSTATUS_INSUFFICIENT_POWER:
+		desc_ioc_state = "insufficient power";
+		break;
+	default:
+		desc_ioc_state = "unknown";
+		break;
+	}
+
+	switch (scsi_status) {
+	case MPI2_SCSI_STATUS_GOOD:
+		desc_scsi_status = "good";
+		break;
+	case MPI2_SCSI_STATUS_CHECK_CONDITION:
+		desc_scsi_status = "check condition";
+		break;
+	case MPI2_SCSI_STATUS_CONDITION_MET:
+		desc_scsi_status = "condition met";
+		break;
+	case MPI2_SCSI_STATUS_BUSY:
+		desc_scsi_status = "busy";
+		break;
+	case MPI2_SCSI_STATUS_INTERMEDIATE:
+		desc_scsi_status = "intermediate";
+		break;
+	case MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET:
+		desc_scsi_status = "intermediate condmet";
+		break;
+	case MPI2_SCSI_STATUS_RESERVATION_CONFLICT:
+		desc_scsi_status = "reservation conflict";
+		break;
+	case MPI2_SCSI_STATUS_COMMAND_TERMINATED:
+		desc_scsi_status = "command terminated";
+		break;
+	case MPI2_SCSI_STATUS_TASK_SET_FULL:
+		desc_scsi_status = "task set full";
+		break;
+	case MPI2_SCSI_STATUS_ACA_ACTIVE:
+		desc_scsi_status = "aca active";
+		break;
+	case MPI2_SCSI_STATUS_TASK_ABORTED:
+		desc_scsi_status = "task aborted";
+		break;
+	default:
+		desc_scsi_status = "unknown";
+		break;
+	}
+
+	desc_scsi_state[0] = '\0';
+	if (!scsi_state)
+		desc_scsi_state = " ";
+	if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID)
+		strcat(desc_scsi_state, "response info ");
+	if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
+		strcat(desc_scsi_state, "state terminated ");
+	if (scsi_state & MPI2_SCSI_STATE_NO_SCSI_STATUS)
+		strcat(desc_scsi_state, "no status ");
+	if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_FAILED)
+		strcat(desc_scsi_state, "autosense failed ");
+	if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID)
+		strcat(desc_scsi_state, "autosense valid ");
+
+	scsi_print_command(scmd);
+
+	if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
+		ioc_warn(ioc, "\t%s wwid(0x%016llx)\n",
+			 device_str, (u64)priv_target->sas_address);
+	} else if (priv_target->flags & MPT_TARGET_FLAGS_PCIE_DEVICE) {
+		pcie_device = mpt3sas_get_pdev_from_target(ioc, priv_target);
+		if (pcie_device) {
+			ioc_info(ioc, "\twwid(0x%016llx), port(%d)\n",
+				 (u64)pcie_device->wwid, pcie_device->port_num);
+			if (pcie_device->enclosure_handle != 0)
+				ioc_info(ioc, "\tenclosure logical id(0x%016llx), slot(%d)\n",
+					 (u64)pcie_device->enclosure_logical_id,
+					 pcie_device->slot);
+			if (pcie_device->connector_name[0])
+				ioc_info(ioc, "\tenclosure level(0x%04x), connector name( %s)\n",
+					 pcie_device->enclosure_level,
+					 pcie_device->connector_name);
+			pcie_device_put(pcie_device);
+		}
+	} else {
+		sas_device = mpt3sas_get_sdev_from_target(ioc, priv_target);
+		if (sas_device) {
+			ioc_warn(ioc, "\tsas_address(0x%016llx), phy(%d)\n",
+				 (u64)sas_device->sas_address, sas_device->phy);
+
+			_scsih_display_enclosure_chassis_info(ioc, sas_device,
+			    NULL, NULL);
+
+			sas_device_put(sas_device);
+		}
+	}
+
+	ioc_warn(ioc, "\thandle(0x%04x), ioc_status(%s)(0x%04x), smid(%d)\n",
+		 le16_to_cpu(mpi_reply->DevHandle),
+		 desc_ioc_state, ioc_status, smid);
+	ioc_warn(ioc, "\trequest_len(%d), underflow(%d), resid(%d)\n",
+		 scsi_bufflen(scmd), scmd->underflow, scsi_get_resid(scmd));
+	ioc_warn(ioc, "\ttag(%d), transfer_count(%d), sc->result(0x%08x)\n",
+		 le16_to_cpu(mpi_reply->TaskTag),
+		 le32_to_cpu(mpi_reply->TransferCount), scmd->result);
+	ioc_warn(ioc, "\tscsi_status(%s)(0x%02x), scsi_state(%s)(0x%02x)\n",
+		 desc_scsi_status, scsi_status, desc_scsi_state, scsi_state);
+
+	if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) {
+		struct sense_info data;
+		_scsih_normalize_sense(scmd->sense_buffer, &data);
+		ioc_warn(ioc, "\t[sense_key,asc,ascq]: [0x%02x,0x%02x,0x%02x], count(%d)\n",
+			 data.skey, data.asc, data.ascq,
+			 le32_to_cpu(mpi_reply->SenseCount));
+	}
+	if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) {
+		response_info = le32_to_cpu(mpi_reply->ResponseInfo);
+		response_bytes = (u8 *)&response_info;
+		_scsih_response_code(ioc, response_bytes[0]);
+	}
+}
+
+/**
+ * _scsih_turn_on_pfa_led - illuminate PFA LED
+ * @ioc: per adapter object
+ * @handle: device handle
+ * Context: process
+ */
+static void
+_scsih_turn_on_pfa_led(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	Mpi2SepReply_t mpi_reply;
+	Mpi2SepRequest_t mpi_request;
+	struct _sas_device *sas_device;
+
+	sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
+	if (!sas_device)
+		return;
+
+	memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
+	mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS;
+	mpi_request.SlotStatus =
+	    cpu_to_le32(MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT);
+	mpi_request.DevHandle = cpu_to_le16(handle);
+	mpi_request.Flags = MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS;
+	if ((mpt3sas_base_scsi_enclosure_processor(ioc, &mpi_reply,
+	    &mpi_request)) != 0) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		goto out;
+	}
+	sas_device->pfa_led_on = 1;
+
+	if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) {
+		dewtprintk(ioc,
+			   ioc_info(ioc, "enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n",
+				    le16_to_cpu(mpi_reply.IOCStatus),
+				    le32_to_cpu(mpi_reply.IOCLogInfo)));
+		goto out;
+	}
+out:
+	sas_device_put(sas_device);
+}
+
+/**
+ * _scsih_turn_off_pfa_led - turn off Fault LED
+ * @ioc: per adapter object
+ * @sas_device: sas device whose PFA LED has to turned off
+ * Context: process
+ */
+static void
+_scsih_turn_off_pfa_led(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_device *sas_device)
+{
+	Mpi2SepReply_t mpi_reply;
+	Mpi2SepRequest_t mpi_request;
+
+	memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
+	mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS;
+	mpi_request.SlotStatus = 0;
+	mpi_request.Slot = cpu_to_le16(sas_device->slot);
+	mpi_request.DevHandle = 0;
+	mpi_request.EnclosureHandle = cpu_to_le16(sas_device->enclosure_handle);
+	mpi_request.Flags = MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS;
+	if ((mpt3sas_base_scsi_enclosure_processor(ioc, &mpi_reply,
+		&mpi_request)) != 0) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return;
+	}
+
+	if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) {
+		dewtprintk(ioc,
+			   ioc_info(ioc, "enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n",
+				    le16_to_cpu(mpi_reply.IOCStatus),
+				    le32_to_cpu(mpi_reply.IOCLogInfo)));
+		return;
+	}
+}
+
+/**
+ * _scsih_send_event_to_turn_on_pfa_led - fire delayed event
+ * @ioc: per adapter object
+ * @handle: device handle
+ * Context: interrupt.
+ */
+static void
+_scsih_send_event_to_turn_on_pfa_led(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct fw_event_work *fw_event;
+
+	fw_event = alloc_fw_event_work(0);
+	if (!fw_event)
+		return;
+	fw_event->event = MPT3SAS_TURN_ON_PFA_LED;
+	fw_event->device_handle = handle;
+	fw_event->ioc = ioc;
+	_scsih_fw_event_add(ioc, fw_event);
+	fw_event_work_put(fw_event);
+}
+
+/**
+ * _scsih_smart_predicted_fault - process smart errors
+ * @ioc: per adapter object
+ * @handle: device handle
+ * Context: interrupt.
+ */
+static void
+_scsih_smart_predicted_fault(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct scsi_target *starget;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	Mpi2EventNotificationReply_t *event_reply;
+	Mpi2EventDataSasDeviceStatusChange_t *event_data;
+	struct _sas_device *sas_device;
+	ssize_t sz;
+	unsigned long flags;
+
+	/* only handle non-raid devices */
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
+	if (!sas_device)
+		goto out_unlock;
+
+	starget = sas_device->starget;
+	sas_target_priv_data = starget->hostdata;
+
+	if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) ||
+	   ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)))
+		goto out_unlock;
+
+	_scsih_display_enclosure_chassis_info(NULL, sas_device, NULL, starget);
+
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM)
+		_scsih_send_event_to_turn_on_pfa_led(ioc, handle);
+
+	/* insert into event log */
+	sz = offsetof(Mpi2EventNotificationReply_t, EventData) +
+	     sizeof(Mpi2EventDataSasDeviceStatusChange_t);
+	event_reply = kzalloc(sz, GFP_ATOMIC);
+	if (!event_reply) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		goto out;
+	}
+
+	event_reply->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
+	event_reply->Event =
+	    cpu_to_le16(MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE);
+	event_reply->MsgLength = sz/4;
+	event_reply->EventDataLength =
+	    cpu_to_le16(sizeof(Mpi2EventDataSasDeviceStatusChange_t)/4);
+	event_data = (Mpi2EventDataSasDeviceStatusChange_t *)
+	    event_reply->EventData;
+	event_data->ReasonCode = MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA;
+	event_data->ASC = 0x5D;
+	event_data->DevHandle = cpu_to_le16(handle);
+	event_data->SASAddress = cpu_to_le64(sas_target_priv_data->sas_address);
+	mpt3sas_ctl_add_to_event_log(ioc, event_reply);
+	kfree(event_reply);
+out:
+	if (sas_device)
+		sas_device_put(sas_device);
+	return;
+
+out_unlock:
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	goto out;
+}
+
+/**
+ * _scsih_io_done - scsi request callback
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Callback handler when using _scsih_qcmd.
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *         0 means the mf is freed from this function.
+ */
+static u8
+_scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
+{
+	Mpi25SCSIIORequest_t *mpi_request;
+	Mpi2SCSIIOReply_t *mpi_reply;
+	struct scsi_cmnd *scmd;
+	struct scsiio_tracker *st;
+	u16 ioc_status;
+	u32 xfer_cnt;
+	u8 scsi_state;
+	u8 scsi_status;
+	u32 log_info;
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	u32 response_code = 0;
+
+	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+
+	scmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid);
+	if (scmd == NULL)
+		return 1;
+
+	_scsih_set_satl_pending(scmd, false);
+
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+
+	if (mpi_reply == NULL) {
+		scmd->result = DID_OK << 16;
+		goto out;
+	}
+
+	sas_device_priv_data = scmd->device->hostdata;
+	if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
+	     sas_device_priv_data->sas_target->deleted) {
+		scmd->result = DID_NO_CONNECT << 16;
+		goto out;
+	}
+	ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
+
+	/*
+	 * WARPDRIVE: If direct_io is set then it is directIO,
+	 * the failed direct I/O should be redirected to volume
+	 */
+	st = scsi_cmd_priv(scmd);
+	if (st->direct_io &&
+	     ((ioc_status & MPI2_IOCSTATUS_MASK)
+	      != MPI2_IOCSTATUS_SCSI_TASK_TERMINATED)) {
+		st->direct_io = 0;
+		st->scmd = scmd;
+		memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
+		mpi_request->DevHandle =
+		    cpu_to_le16(sas_device_priv_data->sas_target->handle);
+		ioc->put_smid_scsi_io(ioc, smid,
+		    sas_device_priv_data->sas_target->handle);
+		return 0;
+	}
+	/* turning off TLR */
+	scsi_state = mpi_reply->SCSIState;
+	if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID)
+		response_code =
+		    le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF;
+	if (!sas_device_priv_data->tlr_snoop_check) {
+		sas_device_priv_data->tlr_snoop_check++;
+		if ((!ioc->is_warpdrive &&
+		    !scsih_is_raid(&scmd->device->sdev_gendev) &&
+		    !scsih_is_nvme(&scmd->device->sdev_gendev))
+		    && sas_is_tlr_enabled(scmd->device) &&
+		    response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) {
+			sas_disable_tlr(scmd->device);
+			sdev_printk(KERN_INFO, scmd->device, "TLR disabled\n");
+		}
+	}
+
+	xfer_cnt = le32_to_cpu(mpi_reply->TransferCount);
+	scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt);
+	if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
+		log_info =  le32_to_cpu(mpi_reply->IOCLogInfo);
+	else
+		log_info = 0;
+	ioc_status &= MPI2_IOCSTATUS_MASK;
+	scsi_status = mpi_reply->SCSIStatus;
+
+	if (ioc_status == MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 &&
+	    (scsi_status == MPI2_SCSI_STATUS_BUSY ||
+	     scsi_status == MPI2_SCSI_STATUS_RESERVATION_CONFLICT ||
+	     scsi_status == MPI2_SCSI_STATUS_TASK_SET_FULL)) {
+		ioc_status = MPI2_IOCSTATUS_SUCCESS;
+	}
+
+	if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) {
+		struct sense_info data;
+		const void *sense_data = mpt3sas_base_get_sense_buffer(ioc,
+		    smid);
+		u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE,
+		    le32_to_cpu(mpi_reply->SenseCount));
+		memcpy(scmd->sense_buffer, sense_data, sz);
+		_scsih_normalize_sense(scmd->sense_buffer, &data);
+		/* failure prediction threshold exceeded */
+		if (data.asc == 0x5D)
+			_scsih_smart_predicted_fault(ioc,
+			    le16_to_cpu(mpi_reply->DevHandle));
+		mpt3sas_trigger_scsi(ioc, data.skey, data.asc, data.ascq);
+
+		if ((ioc->logging_level & MPT_DEBUG_REPLY) &&
+		     ((scmd->sense_buffer[2] == UNIT_ATTENTION) ||
+		     (scmd->sense_buffer[2] == MEDIUM_ERROR) ||
+		     (scmd->sense_buffer[2] == HARDWARE_ERROR)))
+			_scsih_scsi_ioc_info(ioc, scmd, mpi_reply, smid);
+	}
+	switch (ioc_status) {
+	case MPI2_IOCSTATUS_BUSY:
+	case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES:
+		scmd->result = SAM_STAT_BUSY;
+		break;
+
+	case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
+		scmd->result = DID_NO_CONNECT << 16;
+		break;
+
+	case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
+		if (sas_device_priv_data->block) {
+			scmd->result = DID_TRANSPORT_DISRUPTED << 16;
+			goto out;
+		}
+		if (log_info == 0x31110630) {
+			if (scmd->retries > 2) {
+				scmd->result = DID_NO_CONNECT << 16;
+				scsi_device_set_state(scmd->device,
+				    SDEV_OFFLINE);
+			} else {
+				scmd->result = DID_SOFT_ERROR << 16;
+				scmd->device->expecting_cc_ua = 1;
+			}
+			break;
+		} else if (log_info == VIRTUAL_IO_FAILED_RETRY) {
+			scmd->result = DID_RESET << 16;
+			break;
+		} else if ((scmd->device->channel == RAID_CHANNEL) &&
+		   (scsi_state == (MPI2_SCSI_STATE_TERMINATED |
+		   MPI2_SCSI_STATE_NO_SCSI_STATUS))) {
+			scmd->result = DID_RESET << 16;
+			break;
+		}
+		scmd->result = DID_SOFT_ERROR << 16;
+		break;
+	case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
+	case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
+		scmd->result = DID_RESET << 16;
+		break;
+
+	case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
+		if ((xfer_cnt == 0) || (scmd->underflow > xfer_cnt))
+			scmd->result = DID_SOFT_ERROR << 16;
+		else
+			scmd->result = (DID_OK << 16) | scsi_status;
+		break;
+
+	case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
+		scmd->result = (DID_OK << 16) | scsi_status;
+
+		if ((scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID))
+			break;
+
+		if (xfer_cnt < scmd->underflow) {
+			if (scsi_status == SAM_STAT_BUSY)
+				scmd->result = SAM_STAT_BUSY;
+			else
+				scmd->result = DID_SOFT_ERROR << 16;
+		} else if (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED |
+		     MPI2_SCSI_STATE_NO_SCSI_STATUS))
+			scmd->result = DID_SOFT_ERROR << 16;
+		else if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
+			scmd->result = DID_RESET << 16;
+		else if (!xfer_cnt && scmd->cmnd[0] == REPORT_LUNS) {
+			mpi_reply->SCSIState = MPI2_SCSI_STATE_AUTOSENSE_VALID;
+			mpi_reply->SCSIStatus = SAM_STAT_CHECK_CONDITION;
+			scsi_build_sense(scmd, 0, ILLEGAL_REQUEST,
+					 0x20, 0);
+		}
+		break;
+
+	case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
+		scsi_set_resid(scmd, 0);
+		fallthrough;
+	case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
+	case MPI2_IOCSTATUS_SUCCESS:
+		scmd->result = (DID_OK << 16) | scsi_status;
+		if (response_code ==
+		    MPI2_SCSITASKMGMT_RSP_INVALID_FRAME ||
+		    (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED |
+		     MPI2_SCSI_STATE_NO_SCSI_STATUS)))
+			scmd->result = DID_SOFT_ERROR << 16;
+		else if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
+			scmd->result = DID_RESET << 16;
+		break;
+
+	case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+	case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+	case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+		_scsih_eedp_error_handling(scmd, ioc_status);
+		break;
+
+	case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
+	case MPI2_IOCSTATUS_INVALID_FUNCTION:
+	case MPI2_IOCSTATUS_INVALID_SGL:
+	case MPI2_IOCSTATUS_INTERNAL_ERROR:
+	case MPI2_IOCSTATUS_INVALID_FIELD:
+	case MPI2_IOCSTATUS_INVALID_STATE:
+	case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
+	case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
+	case MPI2_IOCSTATUS_INSUFFICIENT_POWER:
+	default:
+		scmd->result = DID_SOFT_ERROR << 16;
+		break;
+
+	}
+
+	if (scmd->result && (ioc->logging_level & MPT_DEBUG_REPLY))
+		_scsih_scsi_ioc_info(ioc , scmd, mpi_reply, smid);
+
+ out:
+
+	scsi_dma_unmap(scmd);
+	mpt3sas_base_free_smid(ioc, smid);
+	scsi_done(scmd);
+	return 0;
+}
+
+/**
+ * _scsih_update_vphys_after_reset - update the Port's
+ *			vphys_list after reset
+ * @ioc: per adapter object
+ *
+ * Returns nothing.
+ */
+static void
+_scsih_update_vphys_after_reset(struct MPT3SAS_ADAPTER *ioc)
+{
+	u16 sz, ioc_status;
+	int i;
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
+	u16 attached_handle;
+	u64 attached_sas_addr;
+	u8 found = 0, port_id;
+	Mpi2SasPhyPage0_t phy_pg0;
+	struct hba_port *port, *port_next, *mport;
+	struct virtual_phy *vphy, *vphy_next;
+	struct _sas_device *sas_device;
+
+	/*
+	 * Mark all the vphys objects as dirty.
+	 */
+	list_for_each_entry_safe(port, port_next,
+	    &ioc->port_table_list, list) {
+		if (!port->vphys_mask)
+			continue;
+		list_for_each_entry_safe(vphy, vphy_next,
+		    &port->vphys_list, list) {
+			vphy->flags |= MPT_VPHY_FLAG_DIRTY_PHY;
+		}
+	}
+
+	/*
+	 * Read SASIOUnitPage0 to get each HBA Phy's data.
+	 */
+	sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) +
+	    (ioc->sas_hba.num_phys * sizeof(Mpi2SasIOUnit0PhyData_t));
+	sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
+	if (!sas_iounit_pg0) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return;
+	}
+	if ((mpt3sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
+	    sas_iounit_pg0, sz)) != 0)
+		goto out;
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+		goto out;
+	/*
+	 * Loop over each HBA Phy.
+	 */
+	for (i = 0; i < ioc->sas_hba.num_phys; i++) {
+		/*
+		 * Check whether Phy's Negotiation Link Rate is > 1.5G or not.
+		 */
+		if ((sas_iounit_pg0->PhyData[i].NegotiatedLinkRate >> 4) <
+		    MPI2_SAS_NEG_LINK_RATE_1_5)
+			continue;
+		/*
+		 * Check whether Phy is connected to SEP device or not,
+		 * if it is SEP device then read the Phy's SASPHYPage0 data to
+		 * determine whether Phy is a virtual Phy or not. if it is
+		 * virtual phy then it is conformed that the attached remote
+		 * device is a HBA's vSES device.
+		 */
+		if (!(le32_to_cpu(
+		    sas_iounit_pg0->PhyData[i].ControllerPhyDeviceInfo) &
+		    MPI2_SAS_DEVICE_INFO_SEP))
+			continue;
+
+		if ((mpt3sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0,
+		    i))) {
+			ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			    __FILE__, __LINE__, __func__);
+			continue;
+		}
+
+		if (!(le32_to_cpu(phy_pg0.PhyInfo) &
+		    MPI2_SAS_PHYINFO_VIRTUAL_PHY))
+			continue;
+		/*
+		 * Get the vSES device's SAS Address.
+		 */
+		attached_handle = le16_to_cpu(
+		    sas_iounit_pg0->PhyData[i].AttachedDevHandle);
+		if (_scsih_get_sas_address(ioc, attached_handle,
+		    &attached_sas_addr) != 0) {
+			ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			    __FILE__, __LINE__, __func__);
+			continue;
+		}
+
+		found = 0;
+		port = port_next = NULL;
+		/*
+		 * Loop over each virtual_phy object from
+		 * each port's vphys_list.
+		 */
+		list_for_each_entry_safe(port,
+		    port_next, &ioc->port_table_list, list) {
+			if (!port->vphys_mask)
+				continue;
+			list_for_each_entry_safe(vphy, vphy_next,
+			    &port->vphys_list, list) {
+				/*
+				 * Continue with next virtual_phy object
+				 * if the object is not marked as dirty.
+				 */
+				if (!(vphy->flags & MPT_VPHY_FLAG_DIRTY_PHY))
+					continue;
+
+				/*
+				 * Continue with next virtual_phy object
+				 * if the object's SAS Address is not equals
+				 * to current Phy's vSES device SAS Address.
+				 */
+				if (vphy->sas_address != attached_sas_addr)
+					continue;
+				/*
+				 * Enable current Phy number bit in object's
+				 * phy_mask field.
+				 */
+				if (!(vphy->phy_mask & (1 << i)))
+					vphy->phy_mask = (1 << i);
+				/*
+				 * Get hba_port object from hba_port table
+				 * corresponding to current phy's Port ID.
+				 * if there is no hba_port object corresponding
+				 * to Phy's Port ID then create a new hba_port
+				 * object & add to hba_port table.
+				 */
+				port_id = sas_iounit_pg0->PhyData[i].Port;
+				mport = mpt3sas_get_port_by_id(ioc, port_id, 1);
+				if (!mport) {
+					mport = kzalloc(
+					    sizeof(struct hba_port), GFP_KERNEL);
+					if (!mport)
+						break;
+					mport->port_id = port_id;
+					ioc_info(ioc,
+					    "%s: hba_port entry: %p, port: %d is added to hba_port list\n",
+					    __func__, mport, mport->port_id);
+					list_add_tail(&mport->list,
+						&ioc->port_table_list);
+				}
+				/*
+				 * If mport & port pointers are not pointing to
+				 * same hba_port object then it means that vSES
+				 * device's Port ID got changed after reset and
+				 * hence move current virtual_phy object from
+				 * port's vphys_list to mport's vphys_list.
+				 */
+				if (port != mport) {
+					if (!mport->vphys_mask)
+						INIT_LIST_HEAD(
+						    &mport->vphys_list);
+					mport->vphys_mask |= (1 << i);
+					port->vphys_mask &= ~(1 << i);
+					list_move(&vphy->list,
+					    &mport->vphys_list);
+					sas_device = mpt3sas_get_sdev_by_addr(
+					    ioc, attached_sas_addr, port);
+					if (sas_device)
+						sas_device->port = mport;
+				}
+				/*
+				 * Earlier while updating the hba_port table,
+				 * it is determined that there is no other
+				 * direct attached device with mport's Port ID,
+				 * Hence mport was marked as dirty. Only vSES
+				 * device has this Port ID, so unmark the mport
+				 * as dirt.
+				 */
+				if (mport->flags & HBA_PORT_FLAG_DIRTY_PORT) {
+					mport->sas_address = 0;
+					mport->phy_mask = 0;
+					mport->flags &=
+					    ~HBA_PORT_FLAG_DIRTY_PORT;
+				}
+				/*
+				 * Unmark current virtual_phy object as dirty.
+				 */
+				vphy->flags &= ~MPT_VPHY_FLAG_DIRTY_PHY;
+				found = 1;
+				break;
+			}
+			if (found)
+				break;
+		}
+	}
+out:
+	kfree(sas_iounit_pg0);
+}
+
+/**
+ * _scsih_get_port_table_after_reset - Construct temporary port table
+ * @ioc: per adapter object
+ * @port_table: address where port table needs to be constructed
+ *
+ * return number of HBA port entries available after reset.
+ */
+static int
+_scsih_get_port_table_after_reset(struct MPT3SAS_ADAPTER *ioc,
+	struct hba_port *port_table)
+{
+	u16 sz, ioc_status;
+	int i, j;
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
+	u16 attached_handle;
+	u64 attached_sas_addr;
+	u8 found = 0, port_count = 0, port_id;
+
+	sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys
+	    * sizeof(Mpi2SasIOUnit0PhyData_t));
+	sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
+	if (!sas_iounit_pg0) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return port_count;
+	}
+
+	if ((mpt3sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
+	    sas_iounit_pg0, sz)) != 0)
+		goto out;
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+		goto out;
+	for (i = 0; i < ioc->sas_hba.num_phys; i++) {
+		found = 0;
+		if ((sas_iounit_pg0->PhyData[i].NegotiatedLinkRate >> 4) <
+		    MPI2_SAS_NEG_LINK_RATE_1_5)
+			continue;
+		attached_handle =
+		    le16_to_cpu(sas_iounit_pg0->PhyData[i].AttachedDevHandle);
+		if (_scsih_get_sas_address(
+		    ioc, attached_handle, &attached_sas_addr) != 0) {
+			ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			    __FILE__, __LINE__, __func__);
+			continue;
+		}
+
+		for (j = 0; j < port_count; j++) {
+			port_id = sas_iounit_pg0->PhyData[i].Port;
+			if (port_table[j].port_id == port_id &&
+			    port_table[j].sas_address == attached_sas_addr) {
+				port_table[j].phy_mask |= (1 << i);
+				found = 1;
+				break;
+			}
+		}
+
+		if (found)
+			continue;
+
+		port_id = sas_iounit_pg0->PhyData[i].Port;
+		port_table[port_count].port_id = port_id;
+		port_table[port_count].phy_mask = (1 << i);
+		port_table[port_count].sas_address = attached_sas_addr;
+		port_count++;
+	}
+out:
+	kfree(sas_iounit_pg0);
+	return port_count;
+}
+
+enum hba_port_matched_codes {
+	NOT_MATCHED = 0,
+	MATCHED_WITH_ADDR_AND_PHYMASK,
+	MATCHED_WITH_ADDR_SUBPHYMASK_AND_PORT,
+	MATCHED_WITH_ADDR_AND_SUBPHYMASK,
+	MATCHED_WITH_ADDR,
+};
+
+/**
+ * _scsih_look_and_get_matched_port_entry - Get matched hba port entry
+ *					from HBA port table
+ * @ioc: per adapter object
+ * @port_entry: hba port entry from temporary port table which needs to be
+ *		searched for matched entry in the HBA port table
+ * @matched_port_entry: save matched hba port entry here
+ * @count: count of matched entries
+ *
+ * return type of matched entry found.
+ */
+static enum hba_port_matched_codes
+_scsih_look_and_get_matched_port_entry(struct MPT3SAS_ADAPTER *ioc,
+	struct hba_port *port_entry,
+	struct hba_port **matched_port_entry, int *count)
+{
+	struct hba_port *port_table_entry, *matched_port = NULL;
+	enum hba_port_matched_codes matched_code = NOT_MATCHED;
+	int lcount = 0;
+	*matched_port_entry = NULL;
+
+	list_for_each_entry(port_table_entry, &ioc->port_table_list, list) {
+		if (!(port_table_entry->flags & HBA_PORT_FLAG_DIRTY_PORT))
+			continue;
+
+		if ((port_table_entry->sas_address == port_entry->sas_address)
+		    && (port_table_entry->phy_mask == port_entry->phy_mask)) {
+			matched_code = MATCHED_WITH_ADDR_AND_PHYMASK;
+			matched_port = port_table_entry;
+			break;
+		}
+
+		if ((port_table_entry->sas_address == port_entry->sas_address)
+		    && (port_table_entry->phy_mask & port_entry->phy_mask)
+		    && (port_table_entry->port_id == port_entry->port_id)) {
+			matched_code = MATCHED_WITH_ADDR_SUBPHYMASK_AND_PORT;
+			matched_port = port_table_entry;
+			continue;
+		}
+
+		if ((port_table_entry->sas_address == port_entry->sas_address)
+		    && (port_table_entry->phy_mask & port_entry->phy_mask)) {
+			if (matched_code ==
+			    MATCHED_WITH_ADDR_SUBPHYMASK_AND_PORT)
+				continue;
+			matched_code = MATCHED_WITH_ADDR_AND_SUBPHYMASK;
+			matched_port = port_table_entry;
+			continue;
+		}
+
+		if (port_table_entry->sas_address == port_entry->sas_address) {
+			if (matched_code ==
+			    MATCHED_WITH_ADDR_SUBPHYMASK_AND_PORT)
+				continue;
+			if (matched_code == MATCHED_WITH_ADDR_AND_SUBPHYMASK)
+				continue;
+			matched_code = MATCHED_WITH_ADDR;
+			matched_port = port_table_entry;
+			lcount++;
+		}
+	}
+
+	*matched_port_entry = matched_port;
+	if (matched_code ==  MATCHED_WITH_ADDR)
+		*count = lcount;
+	return matched_code;
+}
+
+/**
+ * _scsih_del_phy_part_of_anther_port - remove phy if it
+ *				is a part of anther port
+ *@ioc: per adapter object
+ *@port_table: port table after reset
+ *@index: hba port entry index
+ *@port_count: number of ports available after host reset
+ *@offset: HBA phy bit offset
+ *
+ */
+static void
+_scsih_del_phy_part_of_anther_port(struct MPT3SAS_ADAPTER *ioc,
+	struct hba_port *port_table,
+	int index, u8 port_count, int offset)
+{
+	struct _sas_node *sas_node = &ioc->sas_hba;
+	u32 i, found = 0;
+
+	for (i = 0; i < port_count; i++) {
+		if (i == index)
+			continue;
+
+		if (port_table[i].phy_mask & (1 << offset)) {
+			mpt3sas_transport_del_phy_from_an_existing_port(
+			    ioc, sas_node, &sas_node->phy[offset]);
+			found = 1;
+			break;
+		}
+	}
+	if (!found)
+		port_table[index].phy_mask |= (1 << offset);
+}
+
+/**
+ * _scsih_add_or_del_phys_from_existing_port - add/remove phy to/from
+ *						right port
+ *@ioc: per adapter object
+ *@hba_port_entry: hba port table entry
+ *@port_table: temporary port table
+ *@index: hba port entry index
+ *@port_count: number of ports available after host reset
+ *
+ */
+static void
+_scsih_add_or_del_phys_from_existing_port(struct MPT3SAS_ADAPTER *ioc,
+	struct hba_port *hba_port_entry, struct hba_port *port_table,
+	int index, int port_count)
+{
+	u32 phy_mask, offset = 0;
+	struct _sas_node *sas_node = &ioc->sas_hba;
+
+	phy_mask = hba_port_entry->phy_mask ^ port_table[index].phy_mask;
+
+	for (offset = 0; offset < ioc->sas_hba.num_phys; offset++) {
+		if (phy_mask & (1 << offset)) {
+			if (!(port_table[index].phy_mask & (1 << offset))) {
+				_scsih_del_phy_part_of_anther_port(
+				    ioc, port_table, index, port_count,
+				    offset);
+				continue;
+			}
+			if (sas_node->phy[offset].phy_belongs_to_port)
+				mpt3sas_transport_del_phy_from_an_existing_port(
+				    ioc, sas_node, &sas_node->phy[offset]);
+			mpt3sas_transport_add_phy_to_an_existing_port(
+			    ioc, sas_node, &sas_node->phy[offset],
+			    hba_port_entry->sas_address,
+			    hba_port_entry);
+		}
+	}
+}
+
+/**
+ * _scsih_del_dirty_vphy - delete virtual_phy objects marked as dirty.
+ * @ioc: per adapter object
+ *
+ * Returns nothing.
+ */
+static void
+_scsih_del_dirty_vphy(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct hba_port *port, *port_next;
+	struct virtual_phy *vphy, *vphy_next;
+
+	list_for_each_entry_safe(port, port_next,
+	    &ioc->port_table_list, list) {
+		if (!port->vphys_mask)
+			continue;
+		list_for_each_entry_safe(vphy, vphy_next,
+		    &port->vphys_list, list) {
+			if (vphy->flags & MPT_VPHY_FLAG_DIRTY_PHY) {
+				drsprintk(ioc, ioc_info(ioc,
+				    "Deleting vphy %p entry from port id: %d\t, Phy_mask 0x%08x\n",
+				    vphy, port->port_id,
+				    vphy->phy_mask));
+				port->vphys_mask &= ~vphy->phy_mask;
+				list_del(&vphy->list);
+				kfree(vphy);
+			}
+		}
+		if (!port->vphys_mask && !port->sas_address)
+			port->flags |= HBA_PORT_FLAG_DIRTY_PORT;
+	}
+}
+
+/**
+ * _scsih_del_dirty_port_entries - delete dirty port entries from port list
+ *					after host reset
+ *@ioc: per adapter object
+ *
+ */
+static void
+_scsih_del_dirty_port_entries(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct hba_port *port, *port_next;
+
+	list_for_each_entry_safe(port, port_next,
+	    &ioc->port_table_list, list) {
+		if (!(port->flags & HBA_PORT_FLAG_DIRTY_PORT) ||
+		    port->flags & HBA_PORT_FLAG_NEW_PORT)
+			continue;
+
+		drsprintk(ioc, ioc_info(ioc,
+		    "Deleting port table entry %p having Port: %d\t Phy_mask 0x%08x\n",
+		    port, port->port_id, port->phy_mask));
+		list_del(&port->list);
+		kfree(port);
+	}
+}
+
+/**
+ * _scsih_sas_port_refresh - Update HBA port table after host reset
+ * @ioc: per adapter object
+ */
+static void
+_scsih_sas_port_refresh(struct MPT3SAS_ADAPTER *ioc)
+{
+	u32 port_count = 0;
+	struct hba_port *port_table;
+	struct hba_port *port_table_entry;
+	struct hba_port *port_entry = NULL;
+	int i, j, count = 0, lcount = 0;
+	int ret;
+	u64 sas_addr;
+	u8 num_phys;
+
+	drsprintk(ioc, ioc_info(ioc,
+	    "updating ports for sas_host(0x%016llx)\n",
+	    (unsigned long long)ioc->sas_hba.sas_address));
+
+	mpt3sas_config_get_number_hba_phys(ioc, &num_phys);
+	if (!num_phys) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return;
+	}
+
+	if (num_phys > ioc->sas_hba.nr_phys_allocated) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+		   __FILE__, __LINE__, __func__);
+		return;
+	}
+	ioc->sas_hba.num_phys = num_phys;
+
+	port_table = kcalloc(ioc->sas_hba.num_phys,
+	    sizeof(struct hba_port), GFP_KERNEL);
+	if (!port_table)
+		return;
+
+	port_count = _scsih_get_port_table_after_reset(ioc, port_table);
+	if (!port_count)
+		return;
+
+	drsprintk(ioc, ioc_info(ioc, "New Port table\n"));
+	for (j = 0; j < port_count; j++)
+		drsprintk(ioc, ioc_info(ioc,
+		    "Port: %d\t Phy_mask 0x%08x\t sas_addr(0x%016llx)\n",
+		    port_table[j].port_id,
+		    port_table[j].phy_mask, port_table[j].sas_address));
+
+	list_for_each_entry(port_table_entry, &ioc->port_table_list, list)
+		port_table_entry->flags |= HBA_PORT_FLAG_DIRTY_PORT;
+
+	drsprintk(ioc, ioc_info(ioc, "Old Port table\n"));
+	port_table_entry = NULL;
+	list_for_each_entry(port_table_entry, &ioc->port_table_list, list) {
+		drsprintk(ioc, ioc_info(ioc,
+		    "Port: %d\t Phy_mask 0x%08x\t sas_addr(0x%016llx)\n",
+		    port_table_entry->port_id,
+		    port_table_entry->phy_mask,
+		    port_table_entry->sas_address));
+	}
+
+	for (j = 0; j < port_count; j++) {
+		ret = _scsih_look_and_get_matched_port_entry(ioc,
+		    &port_table[j], &port_entry, &count);
+		if (!port_entry) {
+			drsprintk(ioc, ioc_info(ioc,
+			    "No Matched entry for sas_addr(0x%16llx), Port:%d\n",
+			    port_table[j].sas_address,
+			    port_table[j].port_id));
+			continue;
+		}
+
+		switch (ret) {
+		case MATCHED_WITH_ADDR_SUBPHYMASK_AND_PORT:
+		case MATCHED_WITH_ADDR_AND_SUBPHYMASK:
+			_scsih_add_or_del_phys_from_existing_port(ioc,
+			    port_entry, port_table, j, port_count);
+			break;
+		case MATCHED_WITH_ADDR:
+			sas_addr = port_table[j].sas_address;
+			for (i = 0; i < port_count; i++) {
+				if (port_table[i].sas_address == sas_addr)
+					lcount++;
+			}
+
+			if (count > 1 || lcount > 1)
+				port_entry = NULL;
+			else
+				_scsih_add_or_del_phys_from_existing_port(ioc,
+				    port_entry, port_table, j, port_count);
+		}
+
+		if (!port_entry)
+			continue;
+
+		if (port_entry->port_id != port_table[j].port_id)
+			port_entry->port_id = port_table[j].port_id;
+		port_entry->flags &= ~HBA_PORT_FLAG_DIRTY_PORT;
+		port_entry->phy_mask = port_table[j].phy_mask;
+	}
+
+	port_table_entry = NULL;
+}
+
+/**
+ * _scsih_alloc_vphy - allocate virtual_phy object
+ * @ioc: per adapter object
+ * @port_id: Port ID number
+ * @phy_num: HBA Phy number
+ *
+ * Returns allocated virtual_phy object.
+ */
+static struct virtual_phy *
+_scsih_alloc_vphy(struct MPT3SAS_ADAPTER *ioc, u8 port_id, u8 phy_num)
+{
+	struct virtual_phy *vphy;
+	struct hba_port *port;
+
+	port = mpt3sas_get_port_by_id(ioc, port_id, 0);
+	if (!port)
+		return NULL;
+
+	vphy = mpt3sas_get_vphy_by_phy(ioc, port, phy_num);
+	if (!vphy) {
+		vphy = kzalloc(sizeof(struct virtual_phy), GFP_KERNEL);
+		if (!vphy)
+			return NULL;
+
+		if (!port->vphys_mask)
+			INIT_LIST_HEAD(&port->vphys_list);
+
+		/*
+		 * Enable bit corresponding to HBA phy number on its
+		 * parent hba_port object's vphys_mask field.
+		 */
+		port->vphys_mask |= (1 << phy_num);
+		vphy->phy_mask |= (1 << phy_num);
+
+		list_add_tail(&vphy->list, &port->vphys_list);
+
+		ioc_info(ioc,
+		    "vphy entry: %p, port id: %d, phy:%d is added to port's vphys_list\n",
+		    vphy, port->port_id, phy_num);
+	}
+	return vphy;
+}
+
+/**
+ * _scsih_sas_host_refresh - refreshing sas host object contents
+ * @ioc: per adapter object
+ * Context: user
+ *
+ * During port enable, fw will send topology events for every device. Its
+ * possible that the handles may change from the previous setting, so this
+ * code keeping handles updating if changed.
+ */
+static void
+_scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc)
+{
+	u16 sz;
+	u16 ioc_status;
+	int i;
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
+	u16 attached_handle;
+	u8 link_rate, port_id;
+	struct hba_port *port;
+	Mpi2SasPhyPage0_t phy_pg0;
+
+	dtmprintk(ioc,
+		  ioc_info(ioc, "updating handles for sas_host(0x%016llx)\n",
+			   (u64)ioc->sas_hba.sas_address));
+
+	sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys
+	    * sizeof(Mpi2SasIOUnit0PhyData_t));
+	sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
+	if (!sas_iounit_pg0) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return;
+	}
+
+	if ((mpt3sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
+	    sas_iounit_pg0, sz)) != 0)
+		goto out;
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+		goto out;
+	for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
+		link_rate = sas_iounit_pg0->PhyData[i].NegotiatedLinkRate >> 4;
+		if (i == 0)
+			ioc->sas_hba.handle = le16_to_cpu(
+			    sas_iounit_pg0->PhyData[0].ControllerDevHandle);
+		port_id = sas_iounit_pg0->PhyData[i].Port;
+		if (!(mpt3sas_get_port_by_id(ioc, port_id, 0))) {
+			port = kzalloc(sizeof(struct hba_port), GFP_KERNEL);
+			if (!port)
+				goto out;
+
+			port->port_id = port_id;
+			ioc_info(ioc,
+			    "hba_port entry: %p, port: %d is added to hba_port list\n",
+			    port, port->port_id);
+			if (ioc->shost_recovery)
+				port->flags = HBA_PORT_FLAG_NEW_PORT;
+			list_add_tail(&port->list, &ioc->port_table_list);
+		}
+		/*
+		 * Check whether current Phy belongs to HBA vSES device or not.
+		 */
+		if (le32_to_cpu(sas_iounit_pg0->PhyData[i].ControllerPhyDeviceInfo) &
+		    MPI2_SAS_DEVICE_INFO_SEP &&
+		    (link_rate >=  MPI2_SAS_NEG_LINK_RATE_1_5)) {
+			if ((mpt3sas_config_get_phy_pg0(ioc, &mpi_reply,
+			    &phy_pg0, i))) {
+				ioc_err(ioc,
+				    "failure at %s:%d/%s()!\n",
+				     __FILE__, __LINE__, __func__);
+				goto out;
+			}
+			if (!(le32_to_cpu(phy_pg0.PhyInfo) &
+			    MPI2_SAS_PHYINFO_VIRTUAL_PHY))
+				continue;
+			/*
+			 * Allocate a virtual_phy object for vSES device, if
+			 * this vSES device is hot added.
+			 */
+			if (!_scsih_alloc_vphy(ioc, port_id, i))
+				goto out;
+			ioc->sas_hba.phy[i].hba_vphy = 1;
+		}
+
+		/*
+		 * Add new HBA phys to STL if these new phys got added as part
+		 * of HBA Firmware upgrade/downgrade operation.
+		 */
+		if (!ioc->sas_hba.phy[i].phy) {
+			if ((mpt3sas_config_get_phy_pg0(ioc, &mpi_reply,
+							&phy_pg0, i))) {
+				ioc_err(ioc, "failure at %s:%d/%s()!\n",
+					__FILE__, __LINE__, __func__);
+				continue;
+			}
+			ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+				MPI2_IOCSTATUS_MASK;
+			if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+				ioc_err(ioc, "failure at %s:%d/%s()!\n",
+					__FILE__, __LINE__, __func__);
+				continue;
+			}
+			ioc->sas_hba.phy[i].phy_id = i;
+			mpt3sas_transport_add_host_phy(ioc,
+				&ioc->sas_hba.phy[i], phy_pg0,
+				ioc->sas_hba.parent_dev);
+			continue;
+		}
+		ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
+		attached_handle = le16_to_cpu(sas_iounit_pg0->PhyData[i].
+		    AttachedDevHandle);
+		if (attached_handle && link_rate < MPI2_SAS_NEG_LINK_RATE_1_5)
+			link_rate = MPI2_SAS_NEG_LINK_RATE_1_5;
+		ioc->sas_hba.phy[i].port =
+		    mpt3sas_get_port_by_id(ioc, port_id, 0);
+		mpt3sas_transport_update_links(ioc, ioc->sas_hba.sas_address,
+		    attached_handle, i, link_rate,
+		    ioc->sas_hba.phy[i].port);
+	}
+	/*
+	 * Clear the phy details if this phy got disabled as part of
+	 * HBA Firmware upgrade/downgrade operation.
+	 */
+	for (i = ioc->sas_hba.num_phys;
+	     i < ioc->sas_hba.nr_phys_allocated; i++) {
+		if (ioc->sas_hba.phy[i].phy &&
+		    ioc->sas_hba.phy[i].phy->negotiated_linkrate >=
+		    SAS_LINK_RATE_1_5_GBPS)
+			mpt3sas_transport_update_links(ioc,
+				ioc->sas_hba.sas_address, 0, i,
+				MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED, NULL);
+	}
+ out:
+	kfree(sas_iounit_pg0);
+}
+
+/**
+ * _scsih_sas_host_add - create sas host object
+ * @ioc: per adapter object
+ *
+ * Creating host side data object, stored in ioc->sas_hba
+ */
+static void
+_scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc)
+{
+	int i;
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
+	Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
+	Mpi2SasPhyPage0_t phy_pg0;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	Mpi2SasEnclosurePage0_t enclosure_pg0;
+	u16 ioc_status;
+	u16 sz;
+	u8 device_missing_delay;
+	u8 num_phys, port_id;
+	struct hba_port *port;
+
+	mpt3sas_config_get_number_hba_phys(ioc, &num_phys);
+	if (!num_phys) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return;
+	}
+
+	ioc->sas_hba.nr_phys_allocated = max_t(u8,
+	    MPT_MAX_HBA_NUM_PHYS, num_phys);
+	ioc->sas_hba.phy = kcalloc(ioc->sas_hba.nr_phys_allocated,
+	    sizeof(struct _sas_phy), GFP_KERNEL);
+	if (!ioc->sas_hba.phy) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		goto out;
+	}
+	ioc->sas_hba.num_phys = num_phys;
+
+	/* sas_iounit page 0 */
+	sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys *
+	    sizeof(Mpi2SasIOUnit0PhyData_t));
+	sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
+	if (!sas_iounit_pg0) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return;
+	}
+	if ((mpt3sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
+	    sas_iounit_pg0, sz))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		goto out;
+	}
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		goto out;
+	}
+
+	/* sas_iounit page 1 */
+	sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
+	    sizeof(Mpi2SasIOUnit1PhyData_t));
+	sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
+	if (!sas_iounit_pg1) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		goto out;
+	}
+	if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
+	    sas_iounit_pg1, sz))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		goto out;
+	}
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		goto out;
+	}
+
+	ioc->io_missing_delay =
+	    sas_iounit_pg1->IODeviceMissingDelay;
+	device_missing_delay =
+	    sas_iounit_pg1->ReportDeviceMissingDelay;
+	if (device_missing_delay & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
+		ioc->device_missing_delay = (device_missing_delay &
+		    MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
+	else
+		ioc->device_missing_delay = device_missing_delay &
+		    MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
+
+	ioc->sas_hba.parent_dev = &ioc->shost->shost_gendev;
+	for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
+		if ((mpt3sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0,
+		    i))) {
+			ioc_err(ioc, "failure at %s:%d/%s()!\n",
+				__FILE__, __LINE__, __func__);
+			goto out;
+		}
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			ioc_err(ioc, "failure at %s:%d/%s()!\n",
+				__FILE__, __LINE__, __func__);
+			goto out;
+		}
+
+		if (i == 0)
+			ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0->
+			    PhyData[0].ControllerDevHandle);
+
+		port_id = sas_iounit_pg0->PhyData[i].Port;
+		if (!(mpt3sas_get_port_by_id(ioc, port_id, 0))) {
+			port = kzalloc(sizeof(struct hba_port), GFP_KERNEL);
+			if (!port)
+				goto out;
+
+			port->port_id = port_id;
+			ioc_info(ioc,
+			   "hba_port entry: %p, port: %d is added to hba_port list\n",
+			   port, port->port_id);
+			list_add_tail(&port->list,
+			    &ioc->port_table_list);
+		}
+
+		/*
+		 * Check whether current Phy belongs to HBA vSES device or not.
+		 */
+		if ((le32_to_cpu(phy_pg0.PhyInfo) &
+		    MPI2_SAS_PHYINFO_VIRTUAL_PHY) &&
+		    (phy_pg0.NegotiatedLinkRate >> 4) >=
+		    MPI2_SAS_NEG_LINK_RATE_1_5) {
+			/*
+			 * Allocate a virtual_phy object for vSES device.
+			 */
+			if (!_scsih_alloc_vphy(ioc, port_id, i))
+				goto out;
+			ioc->sas_hba.phy[i].hba_vphy = 1;
+		}
+
+		ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
+		ioc->sas_hba.phy[i].phy_id = i;
+		ioc->sas_hba.phy[i].port =
+		    mpt3sas_get_port_by_id(ioc, port_id, 0);
+		mpt3sas_transport_add_host_phy(ioc, &ioc->sas_hba.phy[i],
+		    phy_pg0, ioc->sas_hba.parent_dev);
+	}
+	if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, ioc->sas_hba.handle))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		goto out;
+	}
+	ioc->sas_hba.enclosure_handle =
+	    le16_to_cpu(sas_device_pg0.EnclosureHandle);
+	ioc->sas_hba.sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+	ioc_info(ioc, "host_add: handle(0x%04x), sas_addr(0x%016llx), phys(%d)\n",
+		 ioc->sas_hba.handle,
+		 (u64)ioc->sas_hba.sas_address,
+		 ioc->sas_hba.num_phys);
+
+	if (ioc->sas_hba.enclosure_handle) {
+		if (!(mpt3sas_config_get_enclosure_pg0(ioc, &mpi_reply,
+		    &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
+		   ioc->sas_hba.enclosure_handle)))
+			ioc->sas_hba.enclosure_logical_id =
+			    le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
+	}
+
+ out:
+	kfree(sas_iounit_pg1);
+	kfree(sas_iounit_pg0);
+}
+
+/**
+ * _scsih_expander_add -  creating expander object
+ * @ioc: per adapter object
+ * @handle: expander handle
+ *
+ * Creating expander object, stored in ioc->sas_expander_list.
+ *
+ * Return: 0 for success, else error.
+ */
+static int
+_scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _sas_node *sas_expander;
+	struct _enclosure_node *enclosure_dev;
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2ExpanderPage0_t expander_pg0;
+	Mpi2ExpanderPage1_t expander_pg1;
+	u32 ioc_status;
+	u16 parent_handle;
+	u64 sas_address, sas_address_parent = 0;
+	int i;
+	unsigned long flags;
+	struct _sas_port *mpt3sas_port = NULL;
+	u8 port_id;
+
+	int rc = 0;
+
+	if (!handle)
+		return -1;
+
+	if (ioc->shost_recovery || ioc->pci_error_recovery)
+		return -1;
+
+	if ((mpt3sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
+	    MPI2_SAS_EXPAND_PGAD_FORM_HNDL, handle))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return -1;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return -1;
+	}
+
+	/* handle out of order topology events */
+	parent_handle = le16_to_cpu(expander_pg0.ParentDevHandle);
+	if (_scsih_get_sas_address(ioc, parent_handle, &sas_address_parent)
+	    != 0) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return -1;
+	}
+
+	port_id = expander_pg0.PhysicalPort;
+	if (sas_address_parent != ioc->sas_hba.sas_address) {
+		spin_lock_irqsave(&ioc->sas_node_lock, flags);
+		sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc,
+		    sas_address_parent,
+		    mpt3sas_get_port_by_id(ioc, port_id, 0));
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		if (!sas_expander) {
+			rc = _scsih_expander_add(ioc, parent_handle);
+			if (rc != 0)
+				return rc;
+		}
+	}
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	sas_address = le64_to_cpu(expander_pg0.SASAddress);
+	sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc,
+	    sas_address, mpt3sas_get_port_by_id(ioc, port_id, 0));
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	if (sas_expander)
+		return 0;
+
+	sas_expander = kzalloc(sizeof(struct _sas_node),
+	    GFP_KERNEL);
+	if (!sas_expander) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return -1;
+	}
+
+	sas_expander->handle = handle;
+	sas_expander->num_phys = expander_pg0.NumPhys;
+	sas_expander->sas_address_parent = sas_address_parent;
+	sas_expander->sas_address = sas_address;
+	sas_expander->port = mpt3sas_get_port_by_id(ioc, port_id, 0);
+	if (!sas_expander->port) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		rc = -1;
+		goto out_fail;
+	}
+
+	ioc_info(ioc, "expander_add: handle(0x%04x), parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n",
+		 handle, parent_handle,
+		 (u64)sas_expander->sas_address, sas_expander->num_phys);
+
+	if (!sas_expander->num_phys) {
+		rc = -1;
+		goto out_fail;
+	}
+	sas_expander->phy = kcalloc(sas_expander->num_phys,
+	    sizeof(struct _sas_phy), GFP_KERNEL);
+	if (!sas_expander->phy) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		rc = -1;
+		goto out_fail;
+	}
+
+	INIT_LIST_HEAD(&sas_expander->sas_port_list);
+	mpt3sas_port = mpt3sas_transport_port_add(ioc, handle,
+	    sas_address_parent, sas_expander->port);
+	if (!mpt3sas_port) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		rc = -1;
+		goto out_fail;
+	}
+	sas_expander->parent_dev = &mpt3sas_port->rphy->dev;
+	sas_expander->rphy = mpt3sas_port->rphy;
+
+	for (i = 0 ; i < sas_expander->num_phys ; i++) {
+		if ((mpt3sas_config_get_expander_pg1(ioc, &mpi_reply,
+		    &expander_pg1, i, handle))) {
+			ioc_err(ioc, "failure at %s:%d/%s()!\n",
+				__FILE__, __LINE__, __func__);
+			rc = -1;
+			goto out_fail;
+		}
+		sas_expander->phy[i].handle = handle;
+		sas_expander->phy[i].phy_id = i;
+		sas_expander->phy[i].port =
+		    mpt3sas_get_port_by_id(ioc, port_id, 0);
+
+		if ((mpt3sas_transport_add_expander_phy(ioc,
+		    &sas_expander->phy[i], expander_pg1,
+		    sas_expander->parent_dev))) {
+			ioc_err(ioc, "failure at %s:%d/%s()!\n",
+				__FILE__, __LINE__, __func__);
+			rc = -1;
+			goto out_fail;
+		}
+	}
+
+	if (sas_expander->enclosure_handle) {
+		enclosure_dev =
+			mpt3sas_scsih_enclosure_find_by_handle(ioc,
+						sas_expander->enclosure_handle);
+		if (enclosure_dev)
+			sas_expander->enclosure_logical_id =
+			    le64_to_cpu(enclosure_dev->pg0.EnclosureLogicalID);
+	}
+
+	_scsih_expander_node_add(ioc, sas_expander);
+	return 0;
+
+ out_fail:
+
+	if (mpt3sas_port)
+		mpt3sas_transport_port_remove(ioc, sas_expander->sas_address,
+		    sas_address_parent, sas_expander->port);
+	kfree(sas_expander);
+	return rc;
+}
+
+/**
+ * mpt3sas_expander_remove - removing expander object
+ * @ioc: per adapter object
+ * @sas_address: expander sas_address
+ * @port: hba port entry
+ */
+void
+mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
+	struct hba_port *port)
+{
+	struct _sas_node *sas_expander;
+	unsigned long flags;
+
+	if (ioc->shost_recovery)
+		return;
+
+	if (!port)
+		return;
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc,
+	    sas_address, port);
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+	if (sas_expander)
+		_scsih_expander_node_remove(ioc, sas_expander);
+}
+
+/**
+ * _scsih_done -  internal SCSI_IO callback handler.
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Callback handler when sending internal generated SCSI_IO.
+ * The callback index passed is `ioc->scsih_cb_idx`
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *         0 means the mf is freed from this function.
+ */
+static u8
+_scsih_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
+{
+	MPI2DefaultReply_t *mpi_reply;
+
+	mpi_reply =  mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	if (ioc->scsih_cmds.status == MPT3_CMD_NOT_USED)
+		return 1;
+	if (ioc->scsih_cmds.smid != smid)
+		return 1;
+	ioc->scsih_cmds.status |= MPT3_CMD_COMPLETE;
+	if (mpi_reply) {
+		memcpy(ioc->scsih_cmds.reply, mpi_reply,
+		    mpi_reply->MsgLength*4);
+		ioc->scsih_cmds.status |= MPT3_CMD_REPLY_VALID;
+	}
+	ioc->scsih_cmds.status &= ~MPT3_CMD_PENDING;
+	complete(&ioc->scsih_cmds.done);
+	return 1;
+}
+
+
+
+
+#define MPT3_MAX_LUNS (255)
+
+
+/**
+ * _scsih_check_access_status - check access flags
+ * @ioc: per adapter object
+ * @sas_address: sas address
+ * @handle: sas device handle
+ * @access_status: errors returned during discovery of the device
+ *
+ * Return: 0 for success, else failure
+ */
+static u8
+_scsih_check_access_status(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
+	u16 handle, u8 access_status)
+{
+	u8 rc = 1;
+	char *desc = NULL;
+
+	switch (access_status) {
+	case MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS:
+	case MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION:
+		rc = 0;
+		break;
+	case MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED:
+		desc = "sata capability failed";
+		break;
+	case MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT:
+		desc = "sata affiliation conflict";
+		break;
+	case MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE:
+		desc = "route not addressable";
+		break;
+	case MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE:
+		desc = "smp error not addressable";
+		break;
+	case MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED:
+		desc = "device blocked";
+		break;
+	case MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE:
+	case MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX:
+		desc = "sata initialization failed";
+		break;
+	default:
+		desc = "unknown";
+		break;
+	}
+
+	if (!rc)
+		return 0;
+
+	ioc_err(ioc, "discovery errors(%s): sas_address(0x%016llx), handle(0x%04x)\n",
+		desc, (u64)sas_address, handle);
+	return rc;
+}
+
+/**
+ * _scsih_check_device - checking device responsiveness
+ * @ioc: per adapter object
+ * @parent_sas_address: sas address of parent expander or sas host
+ * @handle: attached device handle
+ * @phy_number: phy number
+ * @link_rate: new link rate
+ */
+static void
+_scsih_check_device(struct MPT3SAS_ADAPTER *ioc,
+	u64 parent_sas_address, u16 handle, u8 phy_number, u8 link_rate)
+{
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	struct _sas_device *sas_device = NULL;
+	struct _enclosure_node *enclosure_dev = NULL;
+	u32 ioc_status;
+	unsigned long flags;
+	u64 sas_address;
+	struct scsi_target *starget;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	u32 device_info;
+	struct hba_port *port;
+
+	if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle)))
+		return;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+		return;
+
+	/* wide port handling ~ we need only handle device once for the phy that
+	 * is matched in sas device page zero
+	 */
+	if (phy_number != sas_device_pg0.PhyNum)
+		return;
+
+	/* check if this is end device */
+	device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
+	if (!(_scsih_is_end_device(device_info)))
+		return;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+	port = mpt3sas_get_port_by_id(ioc, sas_device_pg0.PhysicalPort, 0);
+	if (!port)
+		goto out_unlock;
+	sas_device = __mpt3sas_get_sdev_by_addr(ioc,
+	    sas_address, port);
+
+	if (!sas_device)
+		goto out_unlock;
+
+	if (unlikely(sas_device->handle != handle)) {
+		starget = sas_device->starget;
+		sas_target_priv_data = starget->hostdata;
+		starget_printk(KERN_INFO, starget,
+			"handle changed from(0x%04x) to (0x%04x)!!!\n",
+			sas_device->handle, handle);
+		sas_target_priv_data->handle = handle;
+		sas_device->handle = handle;
+		if (le16_to_cpu(sas_device_pg0.Flags) &
+		     MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID) {
+			sas_device->enclosure_level =
+				sas_device_pg0.EnclosureLevel;
+			memcpy(sas_device->connector_name,
+				sas_device_pg0.ConnectorName, 4);
+			sas_device->connector_name[4] = '\0';
+		} else {
+			sas_device->enclosure_level = 0;
+			sas_device->connector_name[0] = '\0';
+		}
+
+		sas_device->enclosure_handle =
+				le16_to_cpu(sas_device_pg0.EnclosureHandle);
+		sas_device->is_chassis_slot_valid = 0;
+		enclosure_dev = mpt3sas_scsih_enclosure_find_by_handle(ioc,
+						sas_device->enclosure_handle);
+		if (enclosure_dev) {
+			sas_device->enclosure_logical_id =
+			    le64_to_cpu(enclosure_dev->pg0.EnclosureLogicalID);
+			if (le16_to_cpu(enclosure_dev->pg0.Flags) &
+			    MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID) {
+				sas_device->is_chassis_slot_valid = 1;
+				sas_device->chassis_slot =
+					enclosure_dev->pg0.ChassisSlot;
+			}
+		}
+	}
+
+	/* check if device is present */
+	if (!(le16_to_cpu(sas_device_pg0.Flags) &
+	    MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) {
+		ioc_err(ioc, "device is not present handle(0x%04x), flags!!!\n",
+			handle);
+		goto out_unlock;
+	}
+
+	/* check if there were any issues with discovery */
+	if (_scsih_check_access_status(ioc, sas_address, handle,
+	    sas_device_pg0.AccessStatus))
+		goto out_unlock;
+
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	_scsih_ublock_io_device(ioc, sas_address, port);
+
+	if (sas_device)
+		sas_device_put(sas_device);
+	return;
+
+out_unlock:
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	if (sas_device)
+		sas_device_put(sas_device);
+}
+
+/**
+ * _scsih_add_device -  creating sas device object
+ * @ioc: per adapter object
+ * @handle: sas device handle
+ * @phy_num: phy number end device attached to
+ * @is_pd: is this hidden raid component
+ *
+ * Creating end device object, stored in ioc->sas_device_list.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num,
+	u8 is_pd)
+{
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	struct _sas_device *sas_device;
+	struct _enclosure_node *enclosure_dev = NULL;
+	u32 ioc_status;
+	u64 sas_address;
+	u32 device_info;
+	u8 port_id;
+
+	if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return -1;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return -1;
+	}
+
+	/* check if this is end device */
+	device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
+	if (!(_scsih_is_end_device(device_info)))
+		return -1;
+	set_bit(handle, ioc->pend_os_device_add);
+	sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+
+	/* check if device is present */
+	if (!(le16_to_cpu(sas_device_pg0.Flags) &
+	    MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) {
+		ioc_err(ioc, "device is not present handle(0x04%x)!!!\n",
+			handle);
+		return -1;
+	}
+
+	/* check if there were any issues with discovery */
+	if (_scsih_check_access_status(ioc, sas_address, handle,
+	    sas_device_pg0.AccessStatus))
+		return -1;
+
+	port_id = sas_device_pg0.PhysicalPort;
+	sas_device = mpt3sas_get_sdev_by_addr(ioc,
+	    sas_address, mpt3sas_get_port_by_id(ioc, port_id, 0));
+	if (sas_device) {
+		clear_bit(handle, ioc->pend_os_device_add);
+		sas_device_put(sas_device);
+		return -1;
+	}
+
+	if (sas_device_pg0.EnclosureHandle) {
+		enclosure_dev =
+			mpt3sas_scsih_enclosure_find_by_handle(ioc,
+			    le16_to_cpu(sas_device_pg0.EnclosureHandle));
+		if (enclosure_dev == NULL)
+			ioc_info(ioc, "Enclosure handle(0x%04x) doesn't match with enclosure device!\n",
+				 sas_device_pg0.EnclosureHandle);
+	}
+
+	sas_device = kzalloc(sizeof(struct _sas_device),
+	    GFP_KERNEL);
+	if (!sas_device) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return 0;
+	}
+
+	kref_init(&sas_device->refcount);
+	sas_device->handle = handle;
+	if (_scsih_get_sas_address(ioc,
+	    le16_to_cpu(sas_device_pg0.ParentDevHandle),
+	    &sas_device->sas_address_parent) != 0)
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+	sas_device->enclosure_handle =
+	    le16_to_cpu(sas_device_pg0.EnclosureHandle);
+	if (sas_device->enclosure_handle != 0)
+		sas_device->slot =
+		    le16_to_cpu(sas_device_pg0.Slot);
+	sas_device->device_info = device_info;
+	sas_device->sas_address = sas_address;
+	sas_device->phy = sas_device_pg0.PhyNum;
+	sas_device->fast_path = (le16_to_cpu(sas_device_pg0.Flags) &
+	    MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE) ? 1 : 0;
+	sas_device->port = mpt3sas_get_port_by_id(ioc, port_id, 0);
+	if (!sas_device->port) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		goto out;
+	}
+
+	if (le16_to_cpu(sas_device_pg0.Flags)
+		& MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID) {
+		sas_device->enclosure_level =
+			sas_device_pg0.EnclosureLevel;
+		memcpy(sas_device->connector_name,
+			sas_device_pg0.ConnectorName, 4);
+		sas_device->connector_name[4] = '\0';
+	} else {
+		sas_device->enclosure_level = 0;
+		sas_device->connector_name[0] = '\0';
+	}
+	/* get enclosure_logical_id & chassis_slot*/
+	sas_device->is_chassis_slot_valid = 0;
+	if (enclosure_dev) {
+		sas_device->enclosure_logical_id =
+		    le64_to_cpu(enclosure_dev->pg0.EnclosureLogicalID);
+		if (le16_to_cpu(enclosure_dev->pg0.Flags) &
+		    MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID) {
+			sas_device->is_chassis_slot_valid = 1;
+			sas_device->chassis_slot =
+					enclosure_dev->pg0.ChassisSlot;
+		}
+	}
+
+	/* get device name */
+	sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName);
+	sas_device->port_type = sas_device_pg0.MaxPortConnections;
+	ioc_info(ioc,
+	    "handle(0x%0x) sas_address(0x%016llx) port_type(0x%0x)\n",
+	    handle, sas_device->sas_address, sas_device->port_type);
+
+	if (ioc->wait_for_discovery_to_complete)
+		_scsih_sas_device_init_add(ioc, sas_device);
+	else
+		_scsih_sas_device_add(ioc, sas_device);
+
+out:
+	sas_device_put(sas_device);
+	return 0;
+}
+
+/**
+ * _scsih_remove_device -  removing sas device object
+ * @ioc: per adapter object
+ * @sas_device: the sas_device object
+ */
+static void
+_scsih_remove_device(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_device *sas_device)
+{
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+
+	if ((ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM) &&
+	     (sas_device->pfa_led_on)) {
+		_scsih_turn_off_pfa_led(ioc, sas_device);
+		sas_device->pfa_led_on = 0;
+	}
+
+	dewtprintk(ioc,
+		   ioc_info(ioc, "%s: enter: handle(0x%04x), sas_addr(0x%016llx)\n",
+			    __func__,
+			    sas_device->handle, (u64)sas_device->sas_address));
+
+	dewtprintk(ioc, _scsih_display_enclosure_chassis_info(ioc, sas_device,
+	    NULL, NULL));
+
+	if (sas_device->starget && sas_device->starget->hostdata) {
+		sas_target_priv_data = sas_device->starget->hostdata;
+		sas_target_priv_data->deleted = 1;
+		_scsih_ublock_io_device(ioc, sas_device->sas_address,
+		    sas_device->port);
+		sas_target_priv_data->handle =
+		     MPT3SAS_INVALID_DEVICE_HANDLE;
+	}
+
+	if (!ioc->hide_drives)
+		mpt3sas_transport_port_remove(ioc,
+		    sas_device->sas_address,
+		    sas_device->sas_address_parent,
+		    sas_device->port);
+
+	ioc_info(ioc, "removing handle(0x%04x), sas_addr(0x%016llx)\n",
+		 sas_device->handle, (u64)sas_device->sas_address);
+
+	_scsih_display_enclosure_chassis_info(ioc, sas_device, NULL, NULL);
+
+	dewtprintk(ioc,
+		   ioc_info(ioc, "%s: exit: handle(0x%04x), sas_addr(0x%016llx)\n",
+			    __func__,
+			    sas_device->handle, (u64)sas_device->sas_address));
+	dewtprintk(ioc, _scsih_display_enclosure_chassis_info(ioc, sas_device,
+	    NULL, NULL));
+}
+
+/**
+ * _scsih_sas_topology_change_event_debug - debug for topology event
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ */
+static void
+_scsih_sas_topology_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataSasTopologyChangeList_t *event_data)
+{
+	int i;
+	u16 handle;
+	u16 reason_code;
+	u8 phy_number;
+	char *status_str = NULL;
+	u8 link_rate, prev_link_rate;
+
+	switch (event_data->ExpStatus) {
+	case MPI2_EVENT_SAS_TOPO_ES_ADDED:
+		status_str = "add";
+		break;
+	case MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING:
+		status_str = "remove";
+		break;
+	case MPI2_EVENT_SAS_TOPO_ES_RESPONDING:
+	case 0:
+		status_str =  "responding";
+		break;
+	case MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING:
+		status_str = "remove delay";
+		break;
+	default:
+		status_str = "unknown status";
+		break;
+	}
+	ioc_info(ioc, "sas topology change: (%s)\n", status_str);
+	pr_info("\thandle(0x%04x), enclosure_handle(0x%04x) " \
+	    "start_phy(%02d), count(%d)\n",
+	    le16_to_cpu(event_data->ExpanderDevHandle),
+	    le16_to_cpu(event_data->EnclosureHandle),
+	    event_data->StartPhyNum, event_data->NumEntries);
+	for (i = 0; i < event_data->NumEntries; i++) {
+		handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+		phy_number = event_data->StartPhyNum + i;
+		reason_code = event_data->PHY[i].PhyStatus &
+		    MPI2_EVENT_SAS_TOPO_RC_MASK;
+		switch (reason_code) {
+		case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
+			status_str = "target add";
+			break;
+		case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
+			status_str = "target remove";
+			break;
+		case MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING:
+			status_str = "delay target remove";
+			break;
+		case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
+			status_str = "link rate change";
+			break;
+		case MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE:
+			status_str = "target responding";
+			break;
+		default:
+			status_str = "unknown";
+			break;
+		}
+		link_rate = event_data->PHY[i].LinkRate >> 4;
+		prev_link_rate = event_data->PHY[i].LinkRate & 0xF;
+		pr_info("\tphy(%02d), attached_handle(0x%04x): %s:" \
+		    " link rate: new(0x%02x), old(0x%02x)\n", phy_number,
+		    handle, status_str, link_rate, prev_link_rate);
+
+	}
+}
+
+/**
+ * _scsih_sas_topology_change_event - handle topology changes
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ *
+ */
+static int
+_scsih_sas_topology_change_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	int i;
+	u16 parent_handle, handle;
+	u16 reason_code;
+	u8 phy_number, max_phys;
+	struct _sas_node *sas_expander;
+	u64 sas_address;
+	unsigned long flags;
+	u8 link_rate, prev_link_rate;
+	struct hba_port *port;
+	Mpi2EventDataSasTopologyChangeList_t *event_data =
+		(Mpi2EventDataSasTopologyChangeList_t *)
+		fw_event->event_data;
+
+	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+		_scsih_sas_topology_change_event_debug(ioc, event_data);
+
+	if (ioc->shost_recovery || ioc->remove_host || ioc->pci_error_recovery)
+		return 0;
+
+	if (!ioc->sas_hba.num_phys)
+		_scsih_sas_host_add(ioc);
+	else
+		_scsih_sas_host_refresh(ioc);
+
+	if (fw_event->ignore) {
+		dewtprintk(ioc, ioc_info(ioc, "ignoring expander event\n"));
+		return 0;
+	}
+
+	parent_handle = le16_to_cpu(event_data->ExpanderDevHandle);
+	port = mpt3sas_get_port_by_id(ioc, event_data->PhysicalPort, 0);
+
+	/* handle expander add */
+	if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_ADDED)
+		if (_scsih_expander_add(ioc, parent_handle) != 0)
+			return 0;
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	sas_expander = mpt3sas_scsih_expander_find_by_handle(ioc,
+	    parent_handle);
+	if (sas_expander) {
+		sas_address = sas_expander->sas_address;
+		max_phys = sas_expander->num_phys;
+		port = sas_expander->port;
+	} else if (parent_handle < ioc->sas_hba.num_phys) {
+		sas_address = ioc->sas_hba.sas_address;
+		max_phys = ioc->sas_hba.num_phys;
+	} else {
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		return 0;
+	}
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	/* handle siblings events */
+	for (i = 0; i < event_data->NumEntries; i++) {
+		if (fw_event->ignore) {
+			dewtprintk(ioc,
+				   ioc_info(ioc, "ignoring expander event\n"));
+			return 0;
+		}
+		if (ioc->remove_host || ioc->pci_error_recovery)
+			return 0;
+		phy_number = event_data->StartPhyNum + i;
+		if (phy_number >= max_phys)
+			continue;
+		reason_code = event_data->PHY[i].PhyStatus &
+		    MPI2_EVENT_SAS_TOPO_RC_MASK;
+		if ((event_data->PHY[i].PhyStatus &
+		    MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT) && (reason_code !=
+		    MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING))
+				continue;
+		handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+		link_rate = event_data->PHY[i].LinkRate >> 4;
+		prev_link_rate = event_data->PHY[i].LinkRate & 0xF;
+		switch (reason_code) {
+		case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
+
+			if (ioc->shost_recovery)
+				break;
+
+			if (link_rate == prev_link_rate)
+				break;
+
+			mpt3sas_transport_update_links(ioc, sas_address,
+			    handle, phy_number, link_rate, port);
+
+			if (link_rate < MPI2_SAS_NEG_LINK_RATE_1_5)
+				break;
+
+			_scsih_check_device(ioc, sas_address, handle,
+			    phy_number, link_rate);
+
+			if (!test_bit(handle, ioc->pend_os_device_add))
+				break;
+
+			fallthrough;
+
+		case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
+
+			if (ioc->shost_recovery)
+				break;
+
+			mpt3sas_transport_update_links(ioc, sas_address,
+			    handle, phy_number, link_rate, port);
+
+			_scsih_add_device(ioc, handle, phy_number, 0);
+
+			break;
+		case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
+
+			_scsih_device_remove_by_handle(ioc, handle);
+			break;
+		}
+	}
+
+	/* handle expander removal */
+	if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING &&
+	    sas_expander)
+		mpt3sas_expander_remove(ioc, sas_address, port);
+
+	return 0;
+}
+
+/**
+ * _scsih_sas_device_status_change_event_debug - debug for device event
+ * @ioc: ?
+ * @event_data: event data payload
+ * Context: user.
+ */
+static void
+_scsih_sas_device_status_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataSasDeviceStatusChange_t *event_data)
+{
+	char *reason_str = NULL;
+
+	switch (event_data->ReasonCode) {
+	case MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
+		reason_str = "smart data";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
+		reason_str = "unsupported device discovered";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
+		reason_str = "internal device reset";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
+		reason_str = "internal task abort";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
+		reason_str = "internal task abort set";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
+		reason_str = "internal clear task set";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
+		reason_str = "internal query task";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE:
+		reason_str = "sata init failure";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET:
+		reason_str = "internal device reset complete";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL:
+		reason_str = "internal task abort complete";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION:
+		reason_str = "internal async notification";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY:
+		reason_str = "expander reduced functionality";
+		break;
+	case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY:
+		reason_str = "expander reduced functionality complete";
+		break;
+	default:
+		reason_str = "unknown reason";
+		break;
+	}
+	ioc_info(ioc, "device status change: (%s)\thandle(0x%04x), sas address(0x%016llx), tag(%d)",
+		 reason_str, le16_to_cpu(event_data->DevHandle),
+		 (u64)le64_to_cpu(event_data->SASAddress),
+		 le16_to_cpu(event_data->TaskTag));
+	if (event_data->ReasonCode == MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA)
+		pr_cont(", ASC(0x%x), ASCQ(0x%x)\n",
+			event_data->ASC, event_data->ASCQ);
+	pr_cont("\n");
+}
+
+/**
+ * _scsih_sas_device_status_change_event - handle device status change
+ * @ioc: per adapter object
+ * @event_data: The fw event
+ * Context: user.
+ */
+static void
+_scsih_sas_device_status_change_event(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataSasDeviceStatusChange_t *event_data)
+{
+	struct MPT3SAS_TARGET *target_priv_data;
+	struct _sas_device *sas_device;
+	u64 sas_address;
+	unsigned long flags;
+
+	/* In MPI Revision K (0xC), the internal device reset complete was
+	 * implemented, so avoid setting tm_busy flag for older firmware.
+	 */
+	if ((ioc->facts.HeaderVersion >> 8) < 0xC)
+		return;
+
+	if (event_data->ReasonCode !=
+	    MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET &&
+	   event_data->ReasonCode !=
+	    MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET)
+		return;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_address = le64_to_cpu(event_data->SASAddress);
+	sas_device = __mpt3sas_get_sdev_by_addr(ioc,
+	    sas_address,
+	    mpt3sas_get_port_by_id(ioc, event_data->PhysicalPort, 0));
+
+	if (!sas_device || !sas_device->starget)
+		goto out;
+
+	target_priv_data = sas_device->starget->hostdata;
+	if (!target_priv_data)
+		goto out;
+
+	if (event_data->ReasonCode ==
+	    MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET)
+		target_priv_data->tm_busy = 1;
+	else
+		target_priv_data->tm_busy = 0;
+
+	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+		ioc_info(ioc,
+		    "%s tm_busy flag for handle(0x%04x)\n",
+		    (target_priv_data->tm_busy == 1) ? "Enable" : "Disable",
+		    target_priv_data->handle);
+
+out:
+	if (sas_device)
+		sas_device_put(sas_device);
+
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+}
+
+
+/**
+ * _scsih_check_pcie_access_status - check access flags
+ * @ioc: per adapter object
+ * @wwid: wwid
+ * @handle: sas device handle
+ * @access_status: errors returned during discovery of the device
+ *
+ * Return: 0 for success, else failure
+ */
+static u8
+_scsih_check_pcie_access_status(struct MPT3SAS_ADAPTER *ioc, u64 wwid,
+	u16 handle, u8 access_status)
+{
+	u8 rc = 1;
+	char *desc = NULL;
+
+	switch (access_status) {
+	case MPI26_PCIEDEV0_ASTATUS_NO_ERRORS:
+	case MPI26_PCIEDEV0_ASTATUS_NEEDS_INITIALIZATION:
+		rc = 0;
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_CAPABILITY_FAILED:
+		desc = "PCIe device capability failed";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_DEVICE_BLOCKED:
+		desc = "PCIe device blocked";
+		ioc_info(ioc,
+		    "Device with Access Status (%s): wwid(0x%016llx), "
+		    "handle(0x%04x)\n ll only be added to the internal list",
+		    desc, (u64)wwid, handle);
+		rc = 0;
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_MEMORY_SPACE_ACCESS_FAILED:
+		desc = "PCIe device mem space access failed";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_UNSUPPORTED_DEVICE:
+		desc = "PCIe device unsupported";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_MSIX_REQUIRED:
+		desc = "PCIe device MSIx Required";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_INIT_FAIL_MAX:
+		desc = "PCIe device init fail max";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_UNKNOWN:
+		desc = "PCIe device status unknown";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_NVME_READY_TIMEOUT:
+		desc = "nvme ready timeout";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_NVME_DEVCFG_UNSUPPORTED:
+		desc = "nvme device configuration unsupported";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_NVME_IDENTIFY_FAILED:
+		desc = "nvme identify failed";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_NVME_QCONFIG_FAILED:
+		desc = "nvme qconfig failed";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_NVME_QCREATION_FAILED:
+		desc = "nvme qcreation failed";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_NVME_EVENTCFG_FAILED:
+		desc = "nvme eventcfg failed";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_NVME_GET_FEATURE_STAT_FAILED:
+		desc = "nvme get feature stat failed";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_NVME_IDLE_TIMEOUT:
+		desc = "nvme idle timeout";
+		break;
+	case MPI26_PCIEDEV0_ASTATUS_NVME_FAILURE_STATUS:
+		desc = "nvme failure status";
+		break;
+	default:
+		ioc_err(ioc, "NVMe discovery error(0x%02x): wwid(0x%016llx), handle(0x%04x)\n",
+			access_status, (u64)wwid, handle);
+		return rc;
+	}
+
+	if (!rc)
+		return rc;
+
+	ioc_info(ioc, "NVMe discovery error(%s): wwid(0x%016llx), handle(0x%04x)\n",
+		 desc, (u64)wwid, handle);
+	return rc;
+}
+
+/**
+ * _scsih_pcie_device_remove_from_sml -  removing pcie device
+ * from SML and free up associated memory
+ * @ioc: per adapter object
+ * @pcie_device: the pcie_device object
+ */
+static void
+_scsih_pcie_device_remove_from_sml(struct MPT3SAS_ADAPTER *ioc,
+	struct _pcie_device *pcie_device)
+{
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+
+	dewtprintk(ioc,
+		   ioc_info(ioc, "%s: enter: handle(0x%04x), wwid(0x%016llx)\n",
+			    __func__,
+			    pcie_device->handle, (u64)pcie_device->wwid));
+	if (pcie_device->enclosure_handle != 0)
+		dewtprintk(ioc,
+			   ioc_info(ioc, "%s: enter: enclosure logical id(0x%016llx), slot(%d)\n",
+				    __func__,
+				    (u64)pcie_device->enclosure_logical_id,
+				    pcie_device->slot));
+	if (pcie_device->connector_name[0] != '\0')
+		dewtprintk(ioc,
+			   ioc_info(ioc, "%s: enter: enclosure level(0x%04x), connector name(%s)\n",
+				    __func__,
+				    pcie_device->enclosure_level,
+				    pcie_device->connector_name));
+
+	if (pcie_device->starget && pcie_device->starget->hostdata) {
+		sas_target_priv_data = pcie_device->starget->hostdata;
+		sas_target_priv_data->deleted = 1;
+		_scsih_ublock_io_device(ioc, pcie_device->wwid, NULL);
+		sas_target_priv_data->handle = MPT3SAS_INVALID_DEVICE_HANDLE;
+	}
+
+	ioc_info(ioc, "removing handle(0x%04x), wwid(0x%016llx)\n",
+		 pcie_device->handle, (u64)pcie_device->wwid);
+	if (pcie_device->enclosure_handle != 0)
+		ioc_info(ioc, "removing : enclosure logical id(0x%016llx), slot(%d)\n",
+			 (u64)pcie_device->enclosure_logical_id,
+			 pcie_device->slot);
+	if (pcie_device->connector_name[0] != '\0')
+		ioc_info(ioc, "removing: enclosure level(0x%04x), connector name( %s)\n",
+			 pcie_device->enclosure_level,
+			 pcie_device->connector_name);
+
+	if (pcie_device->starget && (pcie_device->access_status !=
+				MPI26_PCIEDEV0_ASTATUS_DEVICE_BLOCKED))
+		scsi_remove_target(&pcie_device->starget->dev);
+	dewtprintk(ioc,
+		   ioc_info(ioc, "%s: exit: handle(0x%04x), wwid(0x%016llx)\n",
+			    __func__,
+			    pcie_device->handle, (u64)pcie_device->wwid));
+	if (pcie_device->enclosure_handle != 0)
+		dewtprintk(ioc,
+			   ioc_info(ioc, "%s: exit: enclosure logical id(0x%016llx), slot(%d)\n",
+				    __func__,
+				    (u64)pcie_device->enclosure_logical_id,
+				    pcie_device->slot));
+	if (pcie_device->connector_name[0] != '\0')
+		dewtprintk(ioc,
+			   ioc_info(ioc, "%s: exit: enclosure level(0x%04x), connector name( %s)\n",
+				    __func__,
+				    pcie_device->enclosure_level,
+				    pcie_device->connector_name));
+
+	kfree(pcie_device->serial_number);
+}
+
+
+/**
+ * _scsih_pcie_check_device - checking device responsiveness
+ * @ioc: per adapter object
+ * @handle: attached device handle
+ */
+static void
+_scsih_pcie_check_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi26PCIeDevicePage0_t pcie_device_pg0;
+	u32 ioc_status;
+	struct _pcie_device *pcie_device;
+	u64 wwid;
+	unsigned long flags;
+	struct scsi_target *starget;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	u32 device_info;
+
+	if ((mpt3sas_config_get_pcie_device_pg0(ioc, &mpi_reply,
+		&pcie_device_pg0, MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE, handle)))
+		return;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+		return;
+
+	/* check if this is end device */
+	device_info = le32_to_cpu(pcie_device_pg0.DeviceInfo);
+	if (!(_scsih_is_nvme_pciescsi_device(device_info)))
+		return;
+
+	wwid = le64_to_cpu(pcie_device_pg0.WWID);
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	pcie_device = __mpt3sas_get_pdev_by_wwid(ioc, wwid);
+
+	if (!pcie_device) {
+		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+		return;
+	}
+
+	if (unlikely(pcie_device->handle != handle)) {
+		starget = pcie_device->starget;
+		sas_target_priv_data = starget->hostdata;
+		pcie_device->access_status = pcie_device_pg0.AccessStatus;
+		starget_printk(KERN_INFO, starget,
+		    "handle changed from(0x%04x) to (0x%04x)!!!\n",
+		    pcie_device->handle, handle);
+		sas_target_priv_data->handle = handle;
+		pcie_device->handle = handle;
+
+		if (le32_to_cpu(pcie_device_pg0.Flags) &
+		    MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID) {
+			pcie_device->enclosure_level =
+			    pcie_device_pg0.EnclosureLevel;
+			memcpy(&pcie_device->connector_name[0],
+			    &pcie_device_pg0.ConnectorName[0], 4);
+		} else {
+			pcie_device->enclosure_level = 0;
+			pcie_device->connector_name[0] = '\0';
+		}
+	}
+
+	/* check if device is present */
+	if (!(le32_to_cpu(pcie_device_pg0.Flags) &
+	    MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT)) {
+		ioc_info(ioc, "device is not present handle(0x%04x), flags!!!\n",
+			 handle);
+		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+		pcie_device_put(pcie_device);
+		return;
+	}
+
+	/* check if there were any issues with discovery */
+	if (_scsih_check_pcie_access_status(ioc, wwid, handle,
+	    pcie_device_pg0.AccessStatus)) {
+		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+		pcie_device_put(pcie_device);
+		return;
+	}
+
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+	pcie_device_put(pcie_device);
+
+	_scsih_ublock_io_device(ioc, wwid, NULL);
+
+	return;
+}
+
+/**
+ * _scsih_pcie_add_device -  creating pcie device object
+ * @ioc: per adapter object
+ * @handle: pcie device handle
+ *
+ * Creating end device object, stored in ioc->pcie_device_list.
+ *
+ * Return: 1 means queue the event later, 0 means complete the event
+ */
+static int
+_scsih_pcie_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	Mpi26PCIeDevicePage0_t pcie_device_pg0;
+	Mpi26PCIeDevicePage2_t pcie_device_pg2;
+	Mpi2ConfigReply_t mpi_reply;
+	struct _pcie_device *pcie_device;
+	struct _enclosure_node *enclosure_dev;
+	u32 ioc_status;
+	u64 wwid;
+
+	if ((mpt3sas_config_get_pcie_device_pg0(ioc, &mpi_reply,
+	    &pcie_device_pg0, MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE, handle))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return 0;
+	}
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return 0;
+	}
+
+	set_bit(handle, ioc->pend_os_device_add);
+	wwid = le64_to_cpu(pcie_device_pg0.WWID);
+
+	/* check if device is present */
+	if (!(le32_to_cpu(pcie_device_pg0.Flags) &
+		MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT)) {
+		ioc_err(ioc, "device is not present handle(0x04%x)!!!\n",
+			handle);
+		return 0;
+	}
+
+	/* check if there were any issues with discovery */
+	if (_scsih_check_pcie_access_status(ioc, wwid, handle,
+	    pcie_device_pg0.AccessStatus))
+		return 0;
+
+	if (!(_scsih_is_nvme_pciescsi_device(le32_to_cpu
+	    (pcie_device_pg0.DeviceInfo))))
+		return 0;
+
+	pcie_device = mpt3sas_get_pdev_by_wwid(ioc, wwid);
+	if (pcie_device) {
+		clear_bit(handle, ioc->pend_os_device_add);
+		pcie_device_put(pcie_device);
+		return 0;
+	}
+
+	/* PCIe Device Page 2 contains read-only information about a
+	 * specific NVMe device; therefore, this page is only
+	 * valid for NVMe devices and skip for pcie devices of type scsi.
+	 */
+	if (!(mpt3sas_scsih_is_pcie_scsi_device(
+		le32_to_cpu(pcie_device_pg0.DeviceInfo)))) {
+		if (mpt3sas_config_get_pcie_device_pg2(ioc, &mpi_reply,
+		    &pcie_device_pg2, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
+		    handle)) {
+			ioc_err(ioc,
+			    "failure at %s:%d/%s()!\n", __FILE__,
+			    __LINE__, __func__);
+			return 0;
+		}
+
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+					MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			ioc_err(ioc,
+			    "failure at %s:%d/%s()!\n", __FILE__,
+			    __LINE__, __func__);
+			return 0;
+		}
+	}
+
+	pcie_device = kzalloc(sizeof(struct _pcie_device), GFP_KERNEL);
+	if (!pcie_device) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return 0;
+	}
+
+	kref_init(&pcie_device->refcount);
+	pcie_device->id = ioc->pcie_target_id++;
+	pcie_device->channel = PCIE_CHANNEL;
+	pcie_device->handle = handle;
+	pcie_device->access_status = pcie_device_pg0.AccessStatus;
+	pcie_device->device_info = le32_to_cpu(pcie_device_pg0.DeviceInfo);
+	pcie_device->wwid = wwid;
+	pcie_device->port_num = pcie_device_pg0.PortNum;
+	pcie_device->fast_path = (le32_to_cpu(pcie_device_pg0.Flags) &
+	    MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE) ? 1 : 0;
+
+	pcie_device->enclosure_handle =
+	    le16_to_cpu(pcie_device_pg0.EnclosureHandle);
+	if (pcie_device->enclosure_handle != 0)
+		pcie_device->slot = le16_to_cpu(pcie_device_pg0.Slot);
+
+	if (le32_to_cpu(pcie_device_pg0.Flags) &
+	    MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID) {
+		pcie_device->enclosure_level = pcie_device_pg0.EnclosureLevel;
+		memcpy(&pcie_device->connector_name[0],
+		    &pcie_device_pg0.ConnectorName[0], 4);
+	} else {
+		pcie_device->enclosure_level = 0;
+		pcie_device->connector_name[0] = '\0';
+	}
+
+	/* get enclosure_logical_id */
+	if (pcie_device->enclosure_handle) {
+		enclosure_dev =
+			mpt3sas_scsih_enclosure_find_by_handle(ioc,
+						pcie_device->enclosure_handle);
+		if (enclosure_dev)
+			pcie_device->enclosure_logical_id =
+			    le64_to_cpu(enclosure_dev->pg0.EnclosureLogicalID);
+	}
+	/* TODO -- Add device name once FW supports it */
+	if (!(mpt3sas_scsih_is_pcie_scsi_device(
+	    le32_to_cpu(pcie_device_pg0.DeviceInfo)))) {
+		pcie_device->nvme_mdts =
+		    le32_to_cpu(pcie_device_pg2.MaximumDataTransferSize);
+		pcie_device->shutdown_latency =
+			le16_to_cpu(pcie_device_pg2.ShutdownLatency);
+		/*
+		 * Set IOC's max_shutdown_latency to drive's RTD3 Entry Latency
+		 * if drive's RTD3 Entry Latency is greater then IOC's
+		 * max_shutdown_latency.
+		 */
+		if (pcie_device->shutdown_latency > ioc->max_shutdown_latency)
+			ioc->max_shutdown_latency =
+				pcie_device->shutdown_latency;
+		if (pcie_device_pg2.ControllerResetTO)
+			pcie_device->reset_timeout =
+			    pcie_device_pg2.ControllerResetTO;
+		else
+			pcie_device->reset_timeout = 30;
+	} else
+		pcie_device->reset_timeout = 30;
+
+	if (ioc->wait_for_discovery_to_complete)
+		_scsih_pcie_device_init_add(ioc, pcie_device);
+	else
+		_scsih_pcie_device_add(ioc, pcie_device);
+
+	pcie_device_put(pcie_device);
+	return 0;
+}
+
+/**
+ * _scsih_pcie_topology_change_event_debug - debug for topology
+ * event
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ */
+static void
+_scsih_pcie_topology_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
+	Mpi26EventDataPCIeTopologyChangeList_t *event_data)
+{
+	int i;
+	u16 handle;
+	u16 reason_code;
+	u8 port_number;
+	char *status_str = NULL;
+	u8 link_rate, prev_link_rate;
+
+	switch (event_data->SwitchStatus) {
+	case MPI26_EVENT_PCIE_TOPO_SS_ADDED:
+		status_str = "add";
+		break;
+	case MPI26_EVENT_PCIE_TOPO_SS_NOT_RESPONDING:
+		status_str = "remove";
+		break;
+	case MPI26_EVENT_PCIE_TOPO_SS_RESPONDING:
+	case 0:
+		status_str =  "responding";
+		break;
+	case MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING:
+		status_str = "remove delay";
+		break;
+	default:
+		status_str = "unknown status";
+		break;
+	}
+	ioc_info(ioc, "pcie topology change: (%s)\n", status_str);
+	pr_info("\tswitch_handle(0x%04x), enclosure_handle(0x%04x)"
+		"start_port(%02d), count(%d)\n",
+		le16_to_cpu(event_data->SwitchDevHandle),
+		le16_to_cpu(event_data->EnclosureHandle),
+		event_data->StartPortNum, event_data->NumEntries);
+	for (i = 0; i < event_data->NumEntries; i++) {
+		handle =
+			le16_to_cpu(event_data->PortEntry[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+		port_number = event_data->StartPortNum + i;
+		reason_code = event_data->PortEntry[i].PortStatus;
+		switch (reason_code) {
+		case MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED:
+			status_str = "target add";
+			break;
+		case MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING:
+			status_str = "target remove";
+			break;
+		case MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING:
+			status_str = "delay target remove";
+			break;
+		case MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED:
+			status_str = "link rate change";
+			break;
+		case MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE:
+			status_str = "target responding";
+			break;
+		default:
+			status_str = "unknown";
+			break;
+		}
+		link_rate = event_data->PortEntry[i].CurrentPortInfo &
+			MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK;
+		prev_link_rate = event_data->PortEntry[i].PreviousPortInfo &
+			MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK;
+		pr_info("\tport(%02d), attached_handle(0x%04x): %s:"
+			" link rate: new(0x%02x), old(0x%02x)\n", port_number,
+			handle, status_str, link_rate, prev_link_rate);
+	}
+}
+
+/**
+ * _scsih_pcie_topology_change_event - handle PCIe topology
+ *  changes
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ *
+ */
+static void
+_scsih_pcie_topology_change_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	int i;
+	u16 handle;
+	u16 reason_code;
+	u8 link_rate, prev_link_rate;
+	unsigned long flags;
+	int rc;
+	Mpi26EventDataPCIeTopologyChangeList_t *event_data =
+		(Mpi26EventDataPCIeTopologyChangeList_t *) fw_event->event_data;
+	struct _pcie_device *pcie_device;
+
+	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+		_scsih_pcie_topology_change_event_debug(ioc, event_data);
+
+	if (ioc->shost_recovery || ioc->remove_host ||
+		ioc->pci_error_recovery)
+		return;
+
+	if (fw_event->ignore) {
+		dewtprintk(ioc, ioc_info(ioc, "ignoring switch event\n"));
+		return;
+	}
+
+	/* handle siblings events */
+	for (i = 0; i < event_data->NumEntries; i++) {
+		if (fw_event->ignore) {
+			dewtprintk(ioc,
+				   ioc_info(ioc, "ignoring switch event\n"));
+			return;
+		}
+		if (ioc->remove_host || ioc->pci_error_recovery)
+			return;
+		reason_code = event_data->PortEntry[i].PortStatus;
+		handle =
+			le16_to_cpu(event_data->PortEntry[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+
+		link_rate = event_data->PortEntry[i].CurrentPortInfo
+			& MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK;
+		prev_link_rate = event_data->PortEntry[i].PreviousPortInfo
+			& MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK;
+
+		switch (reason_code) {
+		case MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED:
+			if (ioc->shost_recovery)
+				break;
+			if (link_rate == prev_link_rate)
+				break;
+			if (link_rate < MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5)
+				break;
+
+			_scsih_pcie_check_device(ioc, handle);
+
+			/* This code after this point handles the test case
+			 * where a device has been added, however its returning
+			 * BUSY for sometime.  Then before the Device Missing
+			 * Delay expires and the device becomes READY, the
+			 * device is removed and added back.
+			 */
+			spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+			pcie_device = __mpt3sas_get_pdev_by_handle(ioc, handle);
+			spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+			if (pcie_device) {
+				pcie_device_put(pcie_device);
+				break;
+			}
+
+			if (!test_bit(handle, ioc->pend_os_device_add))
+				break;
+
+			dewtprintk(ioc,
+				   ioc_info(ioc, "handle(0x%04x) device not found: convert event to a device add\n",
+					    handle));
+			event_data->PortEntry[i].PortStatus &= 0xF0;
+			event_data->PortEntry[i].PortStatus |=
+				MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED;
+			fallthrough;
+		case MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED:
+			if (ioc->shost_recovery)
+				break;
+			if (link_rate < MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5)
+				break;
+
+			rc = _scsih_pcie_add_device(ioc, handle);
+			if (!rc) {
+				/* mark entry vacant */
+				/* TODO This needs to be reviewed and fixed,
+				 * we dont have an entry
+				 * to make an event void like vacant
+				 */
+				event_data->PortEntry[i].PortStatus |=
+					MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE;
+			}
+			break;
+		case MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING:
+			_scsih_pcie_device_remove_by_handle(ioc, handle);
+			break;
+		}
+	}
+}
+
+/**
+ * _scsih_pcie_device_status_change_event_debug - debug for device event
+ * @ioc: ?
+ * @event_data: event data payload
+ * Context: user.
+ */
+static void
+_scsih_pcie_device_status_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
+	Mpi26EventDataPCIeDeviceStatusChange_t *event_data)
+{
+	char *reason_str = NULL;
+
+	switch (event_data->ReasonCode) {
+	case MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA:
+		reason_str = "smart data";
+		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_UNSUPPORTED:
+		reason_str = "unsupported device discovered";
+		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET:
+		reason_str = "internal device reset";
+		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_TASK_ABORT_INTERNAL:
+		reason_str = "internal task abort";
+		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
+		reason_str = "internal task abort set";
+		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
+		reason_str = "internal clear task set";
+		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_QUERY_TASK_INTERNAL:
+		reason_str = "internal query task";
+		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_DEV_INIT_FAILURE:
+		reason_str = "device init failure";
+		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET:
+		reason_str = "internal device reset complete";
+		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_CMP_TASK_ABORT_INTERNAL:
+		reason_str = "internal task abort complete";
+		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_ASYNC_NOTIFICATION:
+		reason_str = "internal async notification";
+		break;
+	case MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED:
+		reason_str = "pcie hot reset failed";
+		break;
+	default:
+		reason_str = "unknown reason";
+		break;
+	}
+
+	ioc_info(ioc, "PCIE device status change: (%s)\n"
+		 "\thandle(0x%04x), WWID(0x%016llx), tag(%d)",
+		 reason_str, le16_to_cpu(event_data->DevHandle),
+		 (u64)le64_to_cpu(event_data->WWID),
+		 le16_to_cpu(event_data->TaskTag));
+	if (event_data->ReasonCode == MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA)
+		pr_cont(", ASC(0x%x), ASCQ(0x%x)\n",
+			event_data->ASC, event_data->ASCQ);
+	pr_cont("\n");
+}
+
+/**
+ * _scsih_pcie_device_status_change_event - handle device status
+ * change
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_scsih_pcie_device_status_change_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	struct MPT3SAS_TARGET *target_priv_data;
+	struct _pcie_device *pcie_device;
+	u64 wwid;
+	unsigned long flags;
+	Mpi26EventDataPCIeDeviceStatusChange_t *event_data =
+		(Mpi26EventDataPCIeDeviceStatusChange_t *)fw_event->event_data;
+	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+		_scsih_pcie_device_status_change_event_debug(ioc,
+			event_data);
+
+	if (event_data->ReasonCode !=
+		MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET &&
+		event_data->ReasonCode !=
+		MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET)
+		return;
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	wwid = le64_to_cpu(event_data->WWID);
+	pcie_device = __mpt3sas_get_pdev_by_wwid(ioc, wwid);
+
+	if (!pcie_device || !pcie_device->starget)
+		goto out;
+
+	target_priv_data = pcie_device->starget->hostdata;
+	if (!target_priv_data)
+		goto out;
+
+	if (event_data->ReasonCode ==
+		MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET)
+		target_priv_data->tm_busy = 1;
+	else
+		target_priv_data->tm_busy = 0;
+out:
+	if (pcie_device)
+		pcie_device_put(pcie_device);
+
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+}
+
+/**
+ * _scsih_sas_enclosure_dev_status_change_event_debug - debug for enclosure
+ * event
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ */
+static void
+_scsih_sas_enclosure_dev_status_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataSasEnclDevStatusChange_t *event_data)
+{
+	char *reason_str = NULL;
+
+	switch (event_data->ReasonCode) {
+	case MPI2_EVENT_SAS_ENCL_RC_ADDED:
+		reason_str = "enclosure add";
+		break;
+	case MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING:
+		reason_str = "enclosure remove";
+		break;
+	default:
+		reason_str = "unknown reason";
+		break;
+	}
+
+	ioc_info(ioc, "enclosure status change: (%s)\n"
+		 "\thandle(0x%04x), enclosure logical id(0x%016llx) number slots(%d)\n",
+		 reason_str,
+		 le16_to_cpu(event_data->EnclosureHandle),
+		 (u64)le64_to_cpu(event_data->EnclosureLogicalID),
+		 le16_to_cpu(event_data->StartSlot));
+}
+
+/**
+ * _scsih_sas_enclosure_dev_status_change_event - handle enclosure events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_scsih_sas_enclosure_dev_status_change_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	Mpi2ConfigReply_t mpi_reply;
+	struct _enclosure_node *enclosure_dev = NULL;
+	Mpi2EventDataSasEnclDevStatusChange_t *event_data =
+		(Mpi2EventDataSasEnclDevStatusChange_t *)fw_event->event_data;
+	int rc;
+	u16 enclosure_handle = le16_to_cpu(event_data->EnclosureHandle);
+
+	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+		_scsih_sas_enclosure_dev_status_change_event_debug(ioc,
+		     (Mpi2EventDataSasEnclDevStatusChange_t *)
+		     fw_event->event_data);
+	if (ioc->shost_recovery)
+		return;
+
+	if (enclosure_handle)
+		enclosure_dev =
+			mpt3sas_scsih_enclosure_find_by_handle(ioc,
+						enclosure_handle);
+	switch (event_data->ReasonCode) {
+	case MPI2_EVENT_SAS_ENCL_RC_ADDED:
+		if (!enclosure_dev) {
+			enclosure_dev =
+				kzalloc(sizeof(struct _enclosure_node),
+					GFP_KERNEL);
+			if (!enclosure_dev) {
+				ioc_info(ioc, "failure at %s:%d/%s()!\n",
+					 __FILE__, __LINE__, __func__);
+				return;
+			}
+			rc = mpt3sas_config_get_enclosure_pg0(ioc, &mpi_reply,
+				&enclosure_dev->pg0,
+				MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
+				enclosure_handle);
+
+			if (rc || (le16_to_cpu(mpi_reply.IOCStatus) &
+						MPI2_IOCSTATUS_MASK)) {
+				kfree(enclosure_dev);
+				return;
+			}
+
+			list_add_tail(&enclosure_dev->list,
+							&ioc->enclosure_list);
+		}
+		break;
+	case MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING:
+		if (enclosure_dev) {
+			list_del(&enclosure_dev->list);
+			kfree(enclosure_dev);
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+/**
+ * _scsih_sas_broadcast_primitive_event - handle broadcast events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_scsih_sas_broadcast_primitive_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	struct scsi_cmnd *scmd;
+	struct scsi_device *sdev;
+	struct scsiio_tracker *st;
+	u16 smid, handle;
+	u32 lun;
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	u32 termination_count;
+	u32 query_count;
+	Mpi2SCSITaskManagementReply_t *mpi_reply;
+	Mpi2EventDataSasBroadcastPrimitive_t *event_data =
+		(Mpi2EventDataSasBroadcastPrimitive_t *)
+		fw_event->event_data;
+	u16 ioc_status;
+	unsigned long flags;
+	int r;
+	u8 max_retries = 0;
+	u8 task_abort_retries;
+
+	mutex_lock(&ioc->tm_cmds.mutex);
+	ioc_info(ioc, "%s: enter: phy number(%d), width(%d)\n",
+		 __func__, event_data->PhyNum, event_data->PortWidth);
+
+	_scsih_block_io_all_device(ioc);
+
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	mpi_reply = ioc->tm_cmds.reply;
+ broadcast_aen_retry:
+
+	/* sanity checks for retrying this loop */
+	if (max_retries++ == 5) {
+		dewtprintk(ioc, ioc_info(ioc, "%s: giving up\n", __func__));
+		goto out;
+	} else if (max_retries > 1)
+		dewtprintk(ioc,
+			   ioc_info(ioc, "%s: %d retry\n",
+				    __func__, max_retries - 1));
+
+	termination_count = 0;
+	query_count = 0;
+	for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
+		if (ioc->shost_recovery)
+			goto out;
+		scmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid);
+		if (!scmd)
+			continue;
+		st = scsi_cmd_priv(scmd);
+		sdev = scmd->device;
+		sas_device_priv_data = sdev->hostdata;
+		if (!sas_device_priv_data || !sas_device_priv_data->sas_target)
+			continue;
+		 /* skip hidden raid components */
+		if (sas_device_priv_data->sas_target->flags &
+		    MPT_TARGET_FLAGS_RAID_COMPONENT)
+			continue;
+		 /* skip volumes */
+		if (sas_device_priv_data->sas_target->flags &
+		    MPT_TARGET_FLAGS_VOLUME)
+			continue;
+		 /* skip PCIe devices */
+		if (sas_device_priv_data->sas_target->flags &
+		    MPT_TARGET_FLAGS_PCIE_DEVICE)
+			continue;
+
+		handle = sas_device_priv_data->sas_target->handle;
+		lun = sas_device_priv_data->lun;
+		query_count++;
+
+		if (ioc->shost_recovery)
+			goto out;
+
+		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+		r = mpt3sas_scsih_issue_tm(ioc, handle, 0, 0, lun,
+			MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, st->smid,
+			st->msix_io, 30, 0);
+		if (r == FAILED) {
+			sdev_printk(KERN_WARNING, sdev,
+			    "mpt3sas_scsih_issue_tm: FAILED when sending "
+			    "QUERY_TASK: scmd(%p)\n", scmd);
+			spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+			goto broadcast_aen_retry;
+		}
+		ioc_status = le16_to_cpu(mpi_reply->IOCStatus)
+		    & MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			sdev_printk(KERN_WARNING, sdev,
+				"query task: FAILED with IOCSTATUS(0x%04x), scmd(%p)\n",
+				ioc_status, scmd);
+			spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+			goto broadcast_aen_retry;
+		}
+
+		/* see if IO is still owned by IOC and target */
+		if (mpi_reply->ResponseCode ==
+		     MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED ||
+		     mpi_reply->ResponseCode ==
+		     MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC) {
+			spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+			continue;
+		}
+		task_abort_retries = 0;
+ tm_retry:
+		if (task_abort_retries++ == 60) {
+			dewtprintk(ioc,
+				   ioc_info(ioc, "%s: ABORT_TASK: giving up\n",
+					    __func__));
+			spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+			goto broadcast_aen_retry;
+		}
+
+		if (ioc->shost_recovery)
+			goto out_no_lock;
+
+		r = mpt3sas_scsih_issue_tm(ioc, handle, sdev->channel, sdev->id,
+			sdev->lun, MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
+			st->smid, st->msix_io, 30, 0);
+		if (r == FAILED || st->cb_idx != 0xFF) {
+			sdev_printk(KERN_WARNING, sdev,
+			    "mpt3sas_scsih_issue_tm: ABORT_TASK: FAILED : "
+			    "scmd(%p)\n", scmd);
+			goto tm_retry;
+		}
+
+		if (task_abort_retries > 1)
+			sdev_printk(KERN_WARNING, sdev,
+			    "mpt3sas_scsih_issue_tm: ABORT_TASK: RETRIES (%d):"
+			    " scmd(%p)\n",
+			    task_abort_retries - 1, scmd);
+
+		termination_count += le32_to_cpu(mpi_reply->TerminationCount);
+		spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	}
+
+	if (ioc->broadcast_aen_pending) {
+		dewtprintk(ioc,
+			   ioc_info(ioc,
+				    "%s: loop back due to pending AEN\n",
+				    __func__));
+		 ioc->broadcast_aen_pending = 0;
+		 goto broadcast_aen_retry;
+	}
+
+ out:
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ out_no_lock:
+
+	dewtprintk(ioc,
+		   ioc_info(ioc, "%s - exit, query_count = %d termination_count = %d\n",
+			    __func__, query_count, termination_count));
+
+	ioc->broadcast_aen_busy = 0;
+	if (!ioc->shost_recovery)
+		_scsih_ublock_io_all_device(ioc);
+	mutex_unlock(&ioc->tm_cmds.mutex);
+}
+
+/**
+ * _scsih_sas_discovery_event - handle discovery events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_scsih_sas_discovery_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	Mpi2EventDataSasDiscovery_t *event_data =
+		(Mpi2EventDataSasDiscovery_t *) fw_event->event_data;
+
+	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) {
+		ioc_info(ioc, "discovery event: (%s)",
+			 event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED ?
+			 "start" : "stop");
+		if (event_data->DiscoveryStatus)
+			pr_cont("discovery_status(0x%08x)",
+				le32_to_cpu(event_data->DiscoveryStatus));
+		pr_cont("\n");
+	}
+
+	if (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED &&
+	    !ioc->sas_hba.num_phys) {
+		if (disable_discovery > 0 && ioc->shost_recovery) {
+			/* Wait for the reset to complete */
+			while (ioc->shost_recovery)
+				ssleep(1);
+		}
+		_scsih_sas_host_add(ioc);
+	}
+}
+
+/**
+ * _scsih_sas_device_discovery_error_event - display SAS device discovery error
+ *						events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_scsih_sas_device_discovery_error_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	Mpi25EventDataSasDeviceDiscoveryError_t *event_data =
+		(Mpi25EventDataSasDeviceDiscoveryError_t *)fw_event->event_data;
+
+	switch (event_data->ReasonCode) {
+	case MPI25_EVENT_SAS_DISC_ERR_SMP_FAILED:
+		ioc_warn(ioc, "SMP command sent to the expander (handle:0x%04x, sas_address:0x%016llx, physical_port:0x%02x) has failed\n",
+			 le16_to_cpu(event_data->DevHandle),
+			 (u64)le64_to_cpu(event_data->SASAddress),
+			 event_data->PhysicalPort);
+		break;
+	case MPI25_EVENT_SAS_DISC_ERR_SMP_TIMEOUT:
+		ioc_warn(ioc, "SMP command sent to the expander (handle:0x%04x, sas_address:0x%016llx, physical_port:0x%02x) has timed out\n",
+			 le16_to_cpu(event_data->DevHandle),
+			 (u64)le64_to_cpu(event_data->SASAddress),
+			 event_data->PhysicalPort);
+		break;
+	default:
+		break;
+	}
+}
+
+/**
+ * _scsih_pcie_enumeration_event - handle enumeration events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_scsih_pcie_enumeration_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	Mpi26EventDataPCIeEnumeration_t *event_data =
+		(Mpi26EventDataPCIeEnumeration_t *)fw_event->event_data;
+
+	if (!(ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK))
+		return;
+
+	ioc_info(ioc, "pcie enumeration event: (%s) Flag 0x%02x",
+		 (event_data->ReasonCode == MPI26_EVENT_PCIE_ENUM_RC_STARTED) ?
+		 "started" : "completed",
+		 event_data->Flags);
+	if (event_data->EnumerationStatus)
+		pr_cont("enumeration_status(0x%08x)",
+			le32_to_cpu(event_data->EnumerationStatus));
+	pr_cont("\n");
+}
+
+/**
+ * _scsih_ir_fastpath - turn on fastpath for IR physdisk
+ * @ioc: per adapter object
+ * @handle: device handle for physical disk
+ * @phys_disk_num: physical disk number
+ *
+ * Return: 0 for success, else failure.
+ */
+static int
+_scsih_ir_fastpath(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phys_disk_num)
+{
+	Mpi2RaidActionRequest_t *mpi_request;
+	Mpi2RaidActionReply_t *mpi_reply;
+	u16 smid;
+	u8 issue_reset = 0;
+	int rc = 0;
+	u16 ioc_status;
+	u32 log_info;
+
+	if (ioc->hba_mpi_version_belonged == MPI2_VERSION)
+		return rc;
+
+	mutex_lock(&ioc->scsih_cmds.mutex);
+
+	if (ioc->scsih_cmds.status != MPT3_CMD_NOT_USED) {
+		ioc_err(ioc, "%s: scsih_cmd in use\n", __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+	ioc->scsih_cmds.status = MPT3_CMD_PENDING;
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->scsih_cb_idx);
+	if (!smid) {
+		ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
+		ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->scsih_cmds.smid = smid;
+	memset(mpi_request, 0, sizeof(Mpi2RaidActionRequest_t));
+
+	mpi_request->Function = MPI2_FUNCTION_RAID_ACTION;
+	mpi_request->Action = MPI2_RAID_ACTION_PHYSDISK_HIDDEN;
+	mpi_request->PhysDiskNum = phys_disk_num;
+
+	dewtprintk(ioc,
+		   ioc_info(ioc, "IR RAID_ACTION: turning fast path on for handle(0x%04x), phys_disk_num (0x%02x)\n",
+			    handle, phys_disk_num));
+
+	init_completion(&ioc->scsih_cmds.done);
+	ioc->put_smid_default(ioc, smid);
+	wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ);
+
+	if (!(ioc->scsih_cmds.status & MPT3_CMD_COMPLETE)) {
+		mpt3sas_check_cmd_timeout(ioc,
+		    ioc->scsih_cmds.status, mpi_request,
+		    sizeof(Mpi2RaidActionRequest_t)/4, issue_reset);
+		rc = -EFAULT;
+		goto out;
+	}
+
+	if (ioc->scsih_cmds.status & MPT3_CMD_REPLY_VALID) {
+
+		mpi_reply = ioc->scsih_cmds.reply;
+		ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
+		if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
+			log_info =  le32_to_cpu(mpi_reply->IOCLogInfo);
+		else
+			log_info = 0;
+		ioc_status &= MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			dewtprintk(ioc,
+				   ioc_info(ioc, "IR RAID_ACTION: failed: ioc_status(0x%04x), loginfo(0x%08x)!!!\n",
+					    ioc_status, log_info));
+			rc = -EFAULT;
+		} else
+			dewtprintk(ioc,
+				   ioc_info(ioc, "IR RAID_ACTION: completed successfully\n"));
+	}
+
+ out:
+	ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+	mutex_unlock(&ioc->scsih_cmds.mutex);
+
+	if (issue_reset)
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+	return rc;
+}
+
+/**
+ * _scsih_reprobe_lun - reprobing lun
+ * @sdev: scsi device struct
+ * @no_uld_attach: sdev->no_uld_attach flag setting
+ *
+ **/
+static void
+_scsih_reprobe_lun(struct scsi_device *sdev, void *no_uld_attach)
+{
+	sdev->no_uld_attach = no_uld_attach ? 1 : 0;
+	sdev_printk(KERN_INFO, sdev, "%s raid component\n",
+	    sdev->no_uld_attach ? "hiding" : "exposing");
+	WARN_ON(scsi_device_reprobe(sdev));
+}
+
+/**
+ * _scsih_sas_volume_add - add new volume
+ * @ioc: per adapter object
+ * @element: IR config element data
+ * Context: user.
+ */
+static void
+_scsih_sas_volume_add(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventIrConfigElement_t *element)
+{
+	struct _raid_device *raid_device;
+	unsigned long flags;
+	u64 wwid;
+	u16 handle = le16_to_cpu(element->VolDevHandle);
+	int rc;
+
+	mpt3sas_config_get_volume_wwid(ioc, handle, &wwid);
+	if (!wwid) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return;
+	}
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	raid_device = _scsih_raid_device_find_by_wwid(ioc, wwid);
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+
+	if (raid_device)
+		return;
+
+	raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL);
+	if (!raid_device) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return;
+	}
+
+	raid_device->id = ioc->sas_id++;
+	raid_device->channel = RAID_CHANNEL;
+	raid_device->handle = handle;
+	raid_device->wwid = wwid;
+	_scsih_raid_device_add(ioc, raid_device);
+	if (!ioc->wait_for_discovery_to_complete) {
+		rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
+		    raid_device->id, 0);
+		if (rc)
+			_scsih_raid_device_remove(ioc, raid_device);
+	} else {
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		_scsih_determine_boot_device(ioc, raid_device, 1);
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+	}
+}
+
+/**
+ * _scsih_sas_volume_delete - delete volume
+ * @ioc: per adapter object
+ * @handle: volume device handle
+ * Context: user.
+ */
+static void
+_scsih_sas_volume_delete(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+{
+	struct _raid_device *raid_device;
+	unsigned long flags;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct scsi_target *starget = NULL;
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
+	if (raid_device) {
+		if (raid_device->starget) {
+			starget = raid_device->starget;
+			sas_target_priv_data = starget->hostdata;
+			sas_target_priv_data->deleted = 1;
+		}
+		ioc_info(ioc, "removing handle(0x%04x), wwid(0x%016llx)\n",
+			 raid_device->handle, (u64)raid_device->wwid);
+		list_del(&raid_device->list);
+		kfree(raid_device);
+	}
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+	if (starget)
+		scsi_remove_target(&starget->dev);
+}
+
+/**
+ * _scsih_sas_pd_expose - expose pd component to /dev/sdX
+ * @ioc: per adapter object
+ * @element: IR config element data
+ * Context: user.
+ */
+static void
+_scsih_sas_pd_expose(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventIrConfigElement_t *element)
+{
+	struct _sas_device *sas_device;
+	struct scsi_target *starget = NULL;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	unsigned long flags;
+	u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
+	if (sas_device) {
+		sas_device->volume_handle = 0;
+		sas_device->volume_wwid = 0;
+		clear_bit(handle, ioc->pd_handles);
+		if (sas_device->starget && sas_device->starget->hostdata) {
+			starget = sas_device->starget;
+			sas_target_priv_data = starget->hostdata;
+			sas_target_priv_data->flags &=
+			    ~MPT_TARGET_FLAGS_RAID_COMPONENT;
+		}
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	if (!sas_device)
+		return;
+
+	/* exposing raid component */
+	if (starget)
+		starget_for_each_device(starget, NULL, _scsih_reprobe_lun);
+
+	sas_device_put(sas_device);
+}
+
+/**
+ * _scsih_sas_pd_hide - hide pd component from /dev/sdX
+ * @ioc: per adapter object
+ * @element: IR config element data
+ * Context: user.
+ */
+static void
+_scsih_sas_pd_hide(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventIrConfigElement_t *element)
+{
+	struct _sas_device *sas_device;
+	struct scsi_target *starget = NULL;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	unsigned long flags;
+	u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
+	u16 volume_handle = 0;
+	u64 volume_wwid = 0;
+
+	mpt3sas_config_get_volume_handle(ioc, handle, &volume_handle);
+	if (volume_handle)
+		mpt3sas_config_get_volume_wwid(ioc, volume_handle,
+		    &volume_wwid);
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
+	if (sas_device) {
+		set_bit(handle, ioc->pd_handles);
+		if (sas_device->starget && sas_device->starget->hostdata) {
+			starget = sas_device->starget;
+			sas_target_priv_data = starget->hostdata;
+			sas_target_priv_data->flags |=
+			    MPT_TARGET_FLAGS_RAID_COMPONENT;
+			sas_device->volume_handle = volume_handle;
+			sas_device->volume_wwid = volume_wwid;
+		}
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	if (!sas_device)
+		return;
+
+	/* hiding raid component */
+	_scsih_ir_fastpath(ioc, handle, element->PhysDiskNum);
+
+	if (starget)
+		starget_for_each_device(starget, (void *)1, _scsih_reprobe_lun);
+
+	sas_device_put(sas_device);
+}
+
+/**
+ * _scsih_sas_pd_delete - delete pd component
+ * @ioc: per adapter object
+ * @element: IR config element data
+ * Context: user.
+ */
+static void
+_scsih_sas_pd_delete(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventIrConfigElement_t *element)
+{
+	u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
+
+	_scsih_device_remove_by_handle(ioc, handle);
+}
+
+/**
+ * _scsih_sas_pd_add - remove pd component
+ * @ioc: per adapter object
+ * @element: IR config element data
+ * Context: user.
+ */
+static void
+_scsih_sas_pd_add(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventIrConfigElement_t *element)
+{
+	struct _sas_device *sas_device;
+	u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	u32 ioc_status;
+	u64 sas_address;
+	u16 parent_handle;
+
+	set_bit(handle, ioc->pd_handles);
+
+	sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
+	if (sas_device) {
+		_scsih_ir_fastpath(ioc, handle, element->PhysDiskNum);
+		sas_device_put(sas_device);
+		return;
+	}
+
+	if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return;
+	}
+
+	parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
+	if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address))
+		mpt3sas_transport_update_links(ioc, sas_address, handle,
+		    sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5,
+		    mpt3sas_get_port_by_id(ioc,
+		    sas_device_pg0.PhysicalPort, 0));
+
+	_scsih_ir_fastpath(ioc, handle, element->PhysDiskNum);
+	_scsih_add_device(ioc, handle, 0, 1);
+}
+
+/**
+ * _scsih_sas_ir_config_change_event_debug - debug for IR Config Change events
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ */
+static void
+_scsih_sas_ir_config_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataIrConfigChangeList_t *event_data)
+{
+	Mpi2EventIrConfigElement_t *element;
+	u8 element_type;
+	int i;
+	char *reason_str = NULL, *element_str = NULL;
+
+	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
+
+	ioc_info(ioc, "raid config change: (%s), elements(%d)\n",
+		 le32_to_cpu(event_data->Flags) & MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG ?
+		 "foreign" : "native",
+		 event_data->NumElements);
+	for (i = 0; i < event_data->NumElements; i++, element++) {
+		switch (element->ReasonCode) {
+		case MPI2_EVENT_IR_CHANGE_RC_ADDED:
+			reason_str = "add";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
+			reason_str = "remove";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE:
+			reason_str = "no change";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_HIDE:
+			reason_str = "hide";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
+			reason_str = "unhide";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
+			reason_str = "volume_created";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
+			reason_str = "volume_deleted";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
+			reason_str = "pd_created";
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
+			reason_str = "pd_deleted";
+			break;
+		default:
+			reason_str = "unknown reason";
+			break;
+		}
+		element_type = le16_to_cpu(element->ElementFlags) &
+		    MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK;
+		switch (element_type) {
+		case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT:
+			element_str = "volume";
+			break;
+		case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT:
+			element_str = "phys disk";
+			break;
+		case MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT:
+			element_str = "hot spare";
+			break;
+		default:
+			element_str = "unknown element";
+			break;
+		}
+		pr_info("\t(%s:%s), vol handle(0x%04x), " \
+		    "pd handle(0x%04x), pd num(0x%02x)\n", element_str,
+		    reason_str, le16_to_cpu(element->VolDevHandle),
+		    le16_to_cpu(element->PhysDiskDevHandle),
+		    element->PhysDiskNum);
+	}
+}
+
+/**
+ * _scsih_sas_ir_config_change_event - handle ir configuration change events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_scsih_sas_ir_config_change_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	Mpi2EventIrConfigElement_t *element;
+	int i;
+	u8 foreign_config;
+	Mpi2EventDataIrConfigChangeList_t *event_data =
+		(Mpi2EventDataIrConfigChangeList_t *)
+		fw_event->event_data;
+
+	if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) &&
+	     (!ioc->hide_ir_msg))
+		_scsih_sas_ir_config_change_event_debug(ioc, event_data);
+
+	foreign_config = (le32_to_cpu(event_data->Flags) &
+	    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
+
+	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
+	if (ioc->shost_recovery &&
+	    ioc->hba_mpi_version_belonged != MPI2_VERSION) {
+		for (i = 0; i < event_data->NumElements; i++, element++) {
+			if (element->ReasonCode == MPI2_EVENT_IR_CHANGE_RC_HIDE)
+				_scsih_ir_fastpath(ioc,
+					le16_to_cpu(element->PhysDiskDevHandle),
+					element->PhysDiskNum);
+		}
+		return;
+	}
+
+	for (i = 0; i < event_data->NumElements; i++, element++) {
+
+		switch (element->ReasonCode) {
+		case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
+		case MPI2_EVENT_IR_CHANGE_RC_ADDED:
+			if (!foreign_config)
+				_scsih_sas_volume_add(ioc, element);
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
+		case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
+			if (!foreign_config)
+				_scsih_sas_volume_delete(ioc,
+				    le16_to_cpu(element->VolDevHandle));
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
+			if (!ioc->is_warpdrive)
+				_scsih_sas_pd_hide(ioc, element);
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
+			if (!ioc->is_warpdrive)
+				_scsih_sas_pd_expose(ioc, element);
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_HIDE:
+			if (!ioc->is_warpdrive)
+				_scsih_sas_pd_add(ioc, element);
+			break;
+		case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
+			if (!ioc->is_warpdrive)
+				_scsih_sas_pd_delete(ioc, element);
+			break;
+		}
+	}
+}
+
+/**
+ * _scsih_sas_ir_volume_event - IR volume event
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_scsih_sas_ir_volume_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	u64 wwid;
+	unsigned long flags;
+	struct _raid_device *raid_device;
+	u16 handle;
+	u32 state;
+	int rc;
+	Mpi2EventDataIrVolume_t *event_data =
+		(Mpi2EventDataIrVolume_t *) fw_event->event_data;
+
+	if (ioc->shost_recovery)
+		return;
+
+	if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
+		return;
+
+	handle = le16_to_cpu(event_data->VolDevHandle);
+	state = le32_to_cpu(event_data->NewValue);
+	if (!ioc->hide_ir_msg)
+		dewtprintk(ioc,
+			   ioc_info(ioc, "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
+				    __func__, handle,
+				    le32_to_cpu(event_data->PreviousValue),
+				    state));
+	switch (state) {
+	case MPI2_RAID_VOL_STATE_MISSING:
+	case MPI2_RAID_VOL_STATE_FAILED:
+		_scsih_sas_volume_delete(ioc, handle);
+		break;
+
+	case MPI2_RAID_VOL_STATE_ONLINE:
+	case MPI2_RAID_VOL_STATE_DEGRADED:
+	case MPI2_RAID_VOL_STATE_OPTIMAL:
+
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+
+		if (raid_device)
+			break;
+
+		mpt3sas_config_get_volume_wwid(ioc, handle, &wwid);
+		if (!wwid) {
+			ioc_err(ioc, "failure at %s:%d/%s()!\n",
+				__FILE__, __LINE__, __func__);
+			break;
+		}
+
+		raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL);
+		if (!raid_device) {
+			ioc_err(ioc, "failure at %s:%d/%s()!\n",
+				__FILE__, __LINE__, __func__);
+			break;
+		}
+
+		raid_device->id = ioc->sas_id++;
+		raid_device->channel = RAID_CHANNEL;
+		raid_device->handle = handle;
+		raid_device->wwid = wwid;
+		_scsih_raid_device_add(ioc, raid_device);
+		rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
+		    raid_device->id, 0);
+		if (rc)
+			_scsih_raid_device_remove(ioc, raid_device);
+		break;
+
+	case MPI2_RAID_VOL_STATE_INITIALIZING:
+	default:
+		break;
+	}
+}
+
+/**
+ * _scsih_sas_ir_physical_disk_event - PD event
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_scsih_sas_ir_physical_disk_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	u16 handle, parent_handle;
+	u32 state;
+	struct _sas_device *sas_device;
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	u32 ioc_status;
+	Mpi2EventDataIrPhysicalDisk_t *event_data =
+		(Mpi2EventDataIrPhysicalDisk_t *) fw_event->event_data;
+	u64 sas_address;
+
+	if (ioc->shost_recovery)
+		return;
+
+	if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED)
+		return;
+
+	handle = le16_to_cpu(event_data->PhysDiskDevHandle);
+	state = le32_to_cpu(event_data->NewValue);
+
+	if (!ioc->hide_ir_msg)
+		dewtprintk(ioc,
+			   ioc_info(ioc, "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
+				    __func__, handle,
+				    le32_to_cpu(event_data->PreviousValue),
+				    state));
+
+	switch (state) {
+	case MPI2_RAID_PD_STATE_ONLINE:
+	case MPI2_RAID_PD_STATE_DEGRADED:
+	case MPI2_RAID_PD_STATE_REBUILDING:
+	case MPI2_RAID_PD_STATE_OPTIMAL:
+	case MPI2_RAID_PD_STATE_HOT_SPARE:
+
+		if (!ioc->is_warpdrive)
+			set_bit(handle, ioc->pd_handles);
+
+		sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
+		if (sas_device) {
+			sas_device_put(sas_device);
+			return;
+		}
+
+		if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+		    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
+		    handle))) {
+			ioc_err(ioc, "failure at %s:%d/%s()!\n",
+				__FILE__, __LINE__, __func__);
+			return;
+		}
+
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			ioc_err(ioc, "failure at %s:%d/%s()!\n",
+				__FILE__, __LINE__, __func__);
+			return;
+		}
+
+		parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
+		if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address))
+			mpt3sas_transport_update_links(ioc, sas_address, handle,
+			    sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5,
+			    mpt3sas_get_port_by_id(ioc,
+			    sas_device_pg0.PhysicalPort, 0));
+
+		_scsih_add_device(ioc, handle, 0, 1);
+
+		break;
+
+	case MPI2_RAID_PD_STATE_OFFLINE:
+	case MPI2_RAID_PD_STATE_NOT_CONFIGURED:
+	case MPI2_RAID_PD_STATE_NOT_COMPATIBLE:
+	default:
+		break;
+	}
+}
+
+/**
+ * _scsih_sas_ir_operation_status_event_debug - debug for IR op event
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ */
+static void
+_scsih_sas_ir_operation_status_event_debug(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataIrOperationStatus_t *event_data)
+{
+	char *reason_str = NULL;
+
+	switch (event_data->RAIDOperation) {
+	case MPI2_EVENT_IR_RAIDOP_RESYNC:
+		reason_str = "resync";
+		break;
+	case MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION:
+		reason_str = "online capacity expansion";
+		break;
+	case MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK:
+		reason_str = "consistency check";
+		break;
+	case MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT:
+		reason_str = "background init";
+		break;
+	case MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT:
+		reason_str = "make data consistent";
+		break;
+	}
+
+	if (!reason_str)
+		return;
+
+	ioc_info(ioc, "raid operational status: (%s)\thandle(0x%04x), percent complete(%d)\n",
+		 reason_str,
+		 le16_to_cpu(event_data->VolDevHandle),
+		 event_data->PercentComplete);
+}
+
+/**
+ * _scsih_sas_ir_operation_status_event - handle RAID operation events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_scsih_sas_ir_operation_status_event(struct MPT3SAS_ADAPTER *ioc,
+	struct fw_event_work *fw_event)
+{
+	Mpi2EventDataIrOperationStatus_t *event_data =
+		(Mpi2EventDataIrOperationStatus_t *)
+		fw_event->event_data;
+	static struct _raid_device *raid_device;
+	unsigned long flags;
+	u16 handle;
+
+	if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) &&
+	    (!ioc->hide_ir_msg))
+		_scsih_sas_ir_operation_status_event_debug(ioc,
+		     event_data);
+
+	/* code added for raid transport support */
+	if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC) {
+
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		handle = le16_to_cpu(event_data->VolDevHandle);
+		raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
+		if (raid_device)
+			raid_device->percent_complete =
+			    event_data->PercentComplete;
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+	}
+}
+
+/**
+ * _scsih_prep_device_scan - initialize parameters prior to device scan
+ * @ioc: per adapter object
+ *
+ * Set the deleted flag prior to device scan.  If the device is found during
+ * the scan, then we clear the deleted flag.
+ */
+static void
+_scsih_prep_device_scan(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct scsi_device *sdev;
+
+	shost_for_each_device(sdev, ioc->shost) {
+		sas_device_priv_data = sdev->hostdata;
+		if (sas_device_priv_data && sas_device_priv_data->sas_target)
+			sas_device_priv_data->sas_target->deleted = 1;
+	}
+}
+
+/**
+ * _scsih_update_device_qdepth - Update QD during Reset.
+ * @ioc: per adapter object
+ *
+ */
+static void
+_scsih_update_device_qdepth(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct _sas_device *sas_device;
+	struct scsi_device *sdev;
+	u16 qdepth;
+
+	ioc_info(ioc, "Update devices with firmware reported queue depth\n");
+	shost_for_each_device(sdev, ioc->shost) {
+		sas_device_priv_data = sdev->hostdata;
+		if (sas_device_priv_data && sas_device_priv_data->sas_target) {
+			sas_target_priv_data = sas_device_priv_data->sas_target;
+			sas_device = sas_device_priv_data->sas_target->sas_dev;
+			if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_PCIE_DEVICE)
+				qdepth = ioc->max_nvme_qd;
+			else if (sas_device &&
+			    sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET)
+				qdepth = (sas_device->port_type > 1) ?
+				    ioc->max_wideport_qd : ioc->max_narrowport_qd;
+			else if (sas_device &&
+			    sas_device->device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
+				qdepth = ioc->max_sata_qd;
+			else
+				continue;
+			mpt3sas_scsih_change_queue_depth(sdev, qdepth);
+		}
+	}
+}
+
+/**
+ * _scsih_mark_responding_sas_device - mark a sas_devices as responding
+ * @ioc: per adapter object
+ * @sas_device_pg0: SAS Device page 0
+ *
+ * After host reset, find out whether devices are still responding.
+ * Used in _scsih_remove_unresponsive_sas_devices.
+ */
+static void
+_scsih_mark_responding_sas_device(struct MPT3SAS_ADAPTER *ioc,
+Mpi2SasDevicePage0_t *sas_device_pg0)
+{
+	struct MPT3SAS_TARGET *sas_target_priv_data = NULL;
+	struct scsi_target *starget;
+	struct _sas_device *sas_device = NULL;
+	struct _enclosure_node *enclosure_dev = NULL;
+	unsigned long flags;
+	struct hba_port *port = mpt3sas_get_port_by_id(
+	    ioc, sas_device_pg0->PhysicalPort, 0);
+
+	if (sas_device_pg0->EnclosureHandle) {
+		enclosure_dev =
+			mpt3sas_scsih_enclosure_find_by_handle(ioc,
+				le16_to_cpu(sas_device_pg0->EnclosureHandle));
+		if (enclosure_dev == NULL)
+			ioc_info(ioc, "Enclosure handle(0x%04x) doesn't match with enclosure device!\n",
+				 sas_device_pg0->EnclosureHandle);
+	}
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
+		if (sas_device->sas_address != le64_to_cpu(
+		    sas_device_pg0->SASAddress))
+			continue;
+		if (sas_device->slot != le16_to_cpu(sas_device_pg0->Slot))
+			continue;
+		if (sas_device->port != port)
+			continue;
+		sas_device->responding = 1;
+		starget = sas_device->starget;
+		if (starget && starget->hostdata) {
+			sas_target_priv_data = starget->hostdata;
+			sas_target_priv_data->tm_busy = 0;
+			sas_target_priv_data->deleted = 0;
+		} else
+			sas_target_priv_data = NULL;
+		if (starget) {
+			starget_printk(KERN_INFO, starget,
+			    "handle(0x%04x), sas_addr(0x%016llx)\n",
+			    le16_to_cpu(sas_device_pg0->DevHandle),
+			    (unsigned long long)
+			    sas_device->sas_address);
+
+			if (sas_device->enclosure_handle != 0)
+				starget_printk(KERN_INFO, starget,
+				 "enclosure logical id(0x%016llx), slot(%d)\n",
+				 (unsigned long long)
+				 sas_device->enclosure_logical_id,
+				 sas_device->slot);
+		}
+		if (le16_to_cpu(sas_device_pg0->Flags) &
+		      MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID) {
+			sas_device->enclosure_level =
+			   sas_device_pg0->EnclosureLevel;
+			memcpy(&sas_device->connector_name[0],
+				&sas_device_pg0->ConnectorName[0], 4);
+		} else {
+			sas_device->enclosure_level = 0;
+			sas_device->connector_name[0] = '\0';
+		}
+
+		sas_device->enclosure_handle =
+			le16_to_cpu(sas_device_pg0->EnclosureHandle);
+		sas_device->is_chassis_slot_valid = 0;
+		if (enclosure_dev) {
+			sas_device->enclosure_logical_id = le64_to_cpu(
+				enclosure_dev->pg0.EnclosureLogicalID);
+			if (le16_to_cpu(enclosure_dev->pg0.Flags) &
+			    MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID) {
+				sas_device->is_chassis_slot_valid = 1;
+				sas_device->chassis_slot =
+					enclosure_dev->pg0.ChassisSlot;
+			}
+		}
+
+		if (sas_device->handle == le16_to_cpu(
+		    sas_device_pg0->DevHandle))
+			goto out;
+		pr_info("\thandle changed from(0x%04x)!!!\n",
+		    sas_device->handle);
+		sas_device->handle = le16_to_cpu(
+		    sas_device_pg0->DevHandle);
+		if (sas_target_priv_data)
+			sas_target_priv_data->handle =
+			    le16_to_cpu(sas_device_pg0->DevHandle);
+		goto out;
+	}
+ out:
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+}
+
+/**
+ * _scsih_create_enclosure_list_after_reset - Free Existing list,
+ *	And create enclosure list by scanning all Enclosure Page(0)s
+ * @ioc: per adapter object
+ */
+static void
+_scsih_create_enclosure_list_after_reset(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct _enclosure_node *enclosure_dev;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 enclosure_handle;
+	int rc;
+
+	/* Free existing enclosure list */
+	mpt3sas_free_enclosure_list(ioc);
+
+	/* Re constructing enclosure list after reset*/
+	enclosure_handle = 0xFFFF;
+	do {
+		enclosure_dev =
+			kzalloc(sizeof(struct _enclosure_node), GFP_KERNEL);
+		if (!enclosure_dev) {
+			ioc_err(ioc, "failure at %s:%d/%s()!\n",
+				__FILE__, __LINE__, __func__);
+			return;
+		}
+		rc = mpt3sas_config_get_enclosure_pg0(ioc, &mpi_reply,
+				&enclosure_dev->pg0,
+				MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE,
+				enclosure_handle);
+
+		if (rc || (le16_to_cpu(mpi_reply.IOCStatus) &
+						MPI2_IOCSTATUS_MASK)) {
+			kfree(enclosure_dev);
+			return;
+		}
+		list_add_tail(&enclosure_dev->list,
+						&ioc->enclosure_list);
+		enclosure_handle =
+			le16_to_cpu(enclosure_dev->pg0.EnclosureHandle);
+	} while (1);
+}
+
+/**
+ * _scsih_search_responding_sas_devices -
+ * @ioc: per adapter object
+ *
+ * After host reset, find out whether devices are still responding.
+ * If not remove.
+ */
+static void
+_scsih_search_responding_sas_devices(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 ioc_status;
+	u16 handle;
+	u32 device_info;
+
+	ioc_info(ioc, "search for end-devices: start\n");
+
+	if (list_empty(&ioc->sas_device_list))
+		goto out;
+
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+	    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
+	    handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+			break;
+		handle = le16_to_cpu(sas_device_pg0.DevHandle);
+		device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
+		if (!(_scsih_is_end_device(device_info)))
+			continue;
+		_scsih_mark_responding_sas_device(ioc, &sas_device_pg0);
+	}
+
+ out:
+	ioc_info(ioc, "search for end-devices: complete\n");
+}
+
+/**
+ * _scsih_mark_responding_pcie_device - mark a pcie_device as responding
+ * @ioc: per adapter object
+ * @pcie_device_pg0: PCIe Device page 0
+ *
+ * After host reset, find out whether devices are still responding.
+ * Used in _scsih_remove_unresponding_devices.
+ */
+static void
+_scsih_mark_responding_pcie_device(struct MPT3SAS_ADAPTER *ioc,
+	Mpi26PCIeDevicePage0_t *pcie_device_pg0)
+{
+	struct MPT3SAS_TARGET *sas_target_priv_data = NULL;
+	struct scsi_target *starget;
+	struct _pcie_device *pcie_device;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	list_for_each_entry(pcie_device, &ioc->pcie_device_list, list) {
+		if ((pcie_device->wwid == le64_to_cpu(pcie_device_pg0->WWID))
+		    && (pcie_device->slot == le16_to_cpu(
+		    pcie_device_pg0->Slot))) {
+			pcie_device->access_status =
+					pcie_device_pg0->AccessStatus;
+			pcie_device->responding = 1;
+			starget = pcie_device->starget;
+			if (starget && starget->hostdata) {
+				sas_target_priv_data = starget->hostdata;
+				sas_target_priv_data->tm_busy = 0;
+				sas_target_priv_data->deleted = 0;
+			} else
+				sas_target_priv_data = NULL;
+			if (starget) {
+				starget_printk(KERN_INFO, starget,
+				    "handle(0x%04x), wwid(0x%016llx) ",
+				    pcie_device->handle,
+				    (unsigned long long)pcie_device->wwid);
+				if (pcie_device->enclosure_handle != 0)
+					starget_printk(KERN_INFO, starget,
+					    "enclosure logical id(0x%016llx), "
+					    "slot(%d)\n",
+					    (unsigned long long)
+					    pcie_device->enclosure_logical_id,
+					    pcie_device->slot);
+			}
+
+			if (((le32_to_cpu(pcie_device_pg0->Flags)) &
+			    MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID) &&
+			    (ioc->hba_mpi_version_belonged != MPI2_VERSION)) {
+				pcie_device->enclosure_level =
+				    pcie_device_pg0->EnclosureLevel;
+				memcpy(&pcie_device->connector_name[0],
+				    &pcie_device_pg0->ConnectorName[0], 4);
+			} else {
+				pcie_device->enclosure_level = 0;
+				pcie_device->connector_name[0] = '\0';
+			}
+
+			if (pcie_device->handle == le16_to_cpu(
+			    pcie_device_pg0->DevHandle))
+				goto out;
+			pr_info("\thandle changed from(0x%04x)!!!\n",
+			    pcie_device->handle);
+			pcie_device->handle = le16_to_cpu(
+			    pcie_device_pg0->DevHandle);
+			if (sas_target_priv_data)
+				sas_target_priv_data->handle =
+				    le16_to_cpu(pcie_device_pg0->DevHandle);
+			goto out;
+		}
+	}
+
+ out:
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+}
+
+/**
+ * _scsih_search_responding_pcie_devices -
+ * @ioc: per adapter object
+ *
+ * After host reset, find out whether devices are still responding.
+ * If not remove.
+ */
+static void
+_scsih_search_responding_pcie_devices(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi26PCIeDevicePage0_t pcie_device_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 ioc_status;
+	u16 handle;
+	u32 device_info;
+
+	ioc_info(ioc, "search for end-devices: start\n");
+
+	if (list_empty(&ioc->pcie_device_list))
+		goto out;
+
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_pcie_device_pg0(ioc, &mpi_reply,
+		&pcie_device_pg0, MPI26_PCIE_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
+		handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			ioc_info(ioc, "\tbreak from %s: ioc_status(0x%04x), loginfo(0x%08x)\n",
+				 __func__, ioc_status,
+				 le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
+		handle = le16_to_cpu(pcie_device_pg0.DevHandle);
+		device_info = le32_to_cpu(pcie_device_pg0.DeviceInfo);
+		if (!(_scsih_is_nvme_pciescsi_device(device_info)))
+			continue;
+		_scsih_mark_responding_pcie_device(ioc, &pcie_device_pg0);
+	}
+out:
+	ioc_info(ioc, "search for PCIe end-devices: complete\n");
+}
+
+/**
+ * _scsih_mark_responding_raid_device - mark a raid_device as responding
+ * @ioc: per adapter object
+ * @wwid: world wide identifier for raid volume
+ * @handle: device handle
+ *
+ * After host reset, find out whether devices are still responding.
+ * Used in _scsih_remove_unresponsive_raid_devices.
+ */
+static void
+_scsih_mark_responding_raid_device(struct MPT3SAS_ADAPTER *ioc, u64 wwid,
+	u16 handle)
+{
+	struct MPT3SAS_TARGET *sas_target_priv_data = NULL;
+	struct scsi_target *starget;
+	struct _raid_device *raid_device;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
+		if (raid_device->wwid == wwid && raid_device->starget) {
+			starget = raid_device->starget;
+			if (starget && starget->hostdata) {
+				sas_target_priv_data = starget->hostdata;
+				sas_target_priv_data->deleted = 0;
+			} else
+				sas_target_priv_data = NULL;
+			raid_device->responding = 1;
+			spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+			starget_printk(KERN_INFO, raid_device->starget,
+			    "handle(0x%04x), wwid(0x%016llx)\n", handle,
+			    (unsigned long long)raid_device->wwid);
+
+			/*
+			 * WARPDRIVE: The handles of the PDs might have changed
+			 * across the host reset so re-initialize the
+			 * required data for Direct IO
+			 */
+			mpt3sas_init_warpdrive_properties(ioc, raid_device);
+			spin_lock_irqsave(&ioc->raid_device_lock, flags);
+			if (raid_device->handle == handle) {
+				spin_unlock_irqrestore(&ioc->raid_device_lock,
+				    flags);
+				return;
+			}
+			pr_info("\thandle changed from(0x%04x)!!!\n",
+			    raid_device->handle);
+			raid_device->handle = handle;
+			if (sas_target_priv_data)
+				sas_target_priv_data->handle = handle;
+			spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+			return;
+		}
+	}
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+}
+
+/**
+ * _scsih_search_responding_raid_devices -
+ * @ioc: per adapter object
+ *
+ * After host reset, find out whether devices are still responding.
+ * If not remove.
+ */
+static void
+_scsih_search_responding_raid_devices(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2RaidVolPage1_t volume_pg1;
+	Mpi2RaidVolPage0_t volume_pg0;
+	Mpi2RaidPhysDiskPage0_t pd_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 ioc_status;
+	u16 handle;
+	u8 phys_disk_num;
+
+	if (!ioc->ir_firmware)
+		return;
+
+	ioc_info(ioc, "search for raid volumes: start\n");
+
+	if (list_empty(&ioc->raid_device_list))
+		goto out;
+
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+	    &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+			break;
+		handle = le16_to_cpu(volume_pg1.DevHandle);
+
+		if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply,
+		    &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
+		     sizeof(Mpi2RaidVolPage0_t)))
+			continue;
+
+		if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
+		    volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
+		    volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED)
+			_scsih_mark_responding_raid_device(ioc,
+			    le64_to_cpu(volume_pg1.WWID), handle);
+	}
+
+	/* refresh the pd_handles */
+	if (!ioc->is_warpdrive) {
+		phys_disk_num = 0xFF;
+		memset(ioc->pd_handles, 0, ioc->pd_handles_sz);
+		while (!(mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
+		    &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
+		    phys_disk_num))) {
+			ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+			    MPI2_IOCSTATUS_MASK;
+			if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+				break;
+			phys_disk_num = pd_pg0.PhysDiskNum;
+			handle = le16_to_cpu(pd_pg0.DevHandle);
+			set_bit(handle, ioc->pd_handles);
+		}
+	}
+ out:
+	ioc_info(ioc, "search for responding raid volumes: complete\n");
+}
+
+/**
+ * _scsih_mark_responding_expander - mark a expander as responding
+ * @ioc: per adapter object
+ * @expander_pg0:SAS Expander Config Page0
+ *
+ * After host reset, find out whether devices are still responding.
+ * Used in _scsih_remove_unresponsive_expanders.
+ */
+static void
+_scsih_mark_responding_expander(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ExpanderPage0_t *expander_pg0)
+{
+	struct _sas_node *sas_expander = NULL;
+	unsigned long flags;
+	int i;
+	struct _enclosure_node *enclosure_dev = NULL;
+	u16 handle = le16_to_cpu(expander_pg0->DevHandle);
+	u16 enclosure_handle = le16_to_cpu(expander_pg0->EnclosureHandle);
+	u64 sas_address = le64_to_cpu(expander_pg0->SASAddress);
+	struct hba_port *port = mpt3sas_get_port_by_id(
+	    ioc, expander_pg0->PhysicalPort, 0);
+
+	if (enclosure_handle)
+		enclosure_dev =
+			mpt3sas_scsih_enclosure_find_by_handle(ioc,
+							enclosure_handle);
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
+		if (sas_expander->sas_address != sas_address)
+			continue;
+		if (sas_expander->port != port)
+			continue;
+		sas_expander->responding = 1;
+
+		if (enclosure_dev) {
+			sas_expander->enclosure_logical_id =
+			    le64_to_cpu(enclosure_dev->pg0.EnclosureLogicalID);
+			sas_expander->enclosure_handle =
+			    le16_to_cpu(expander_pg0->EnclosureHandle);
+		}
+
+		if (sas_expander->handle == handle)
+			goto out;
+		pr_info("\texpander(0x%016llx): handle changed" \
+		    " from(0x%04x) to (0x%04x)!!!\n",
+		    (unsigned long long)sas_expander->sas_address,
+		    sas_expander->handle, handle);
+		sas_expander->handle = handle;
+		for (i = 0 ; i < sas_expander->num_phys ; i++)
+			sas_expander->phy[i].handle = handle;
+		goto out;
+	}
+ out:
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+}
+
+/**
+ * _scsih_search_responding_expanders -
+ * @ioc: per adapter object
+ *
+ * After host reset, find out whether devices are still responding.
+ * If not remove.
+ */
+static void
+_scsih_search_responding_expanders(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2ExpanderPage0_t expander_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 ioc_status;
+	u64 sas_address;
+	u16 handle;
+	u8 port;
+
+	ioc_info(ioc, "search for expanders: start\n");
+
+	if (list_empty(&ioc->sas_expander_list))
+		goto out;
+
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
+	    MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
+
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+			break;
+
+		handle = le16_to_cpu(expander_pg0.DevHandle);
+		sas_address = le64_to_cpu(expander_pg0.SASAddress);
+		port = expander_pg0.PhysicalPort;
+		pr_info(
+		    "\texpander present: handle(0x%04x), sas_addr(0x%016llx), port:%d\n",
+		    handle, (unsigned long long)sas_address,
+		    (ioc->multipath_on_hba ?
+		    port : MULTIPATH_DISABLED_PORT_ID));
+		_scsih_mark_responding_expander(ioc, &expander_pg0);
+	}
+
+ out:
+	ioc_info(ioc, "search for expanders: complete\n");
+}
+
+/**
+ * _scsih_remove_unresponding_devices - removing unresponding devices
+ * @ioc: per adapter object
+ */
+static void
+_scsih_remove_unresponding_devices(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct _sas_device *sas_device, *sas_device_next;
+	struct _sas_node *sas_expander, *sas_expander_next;
+	struct _raid_device *raid_device, *raid_device_next;
+	struct _pcie_device *pcie_device, *pcie_device_next;
+	struct list_head tmp_list;
+	unsigned long flags;
+	LIST_HEAD(head);
+
+	ioc_info(ioc, "removing unresponding devices: start\n");
+
+	/* removing unresponding end devices */
+	ioc_info(ioc, "removing unresponding devices: end-devices\n");
+	/*
+	 * Iterate, pulling off devices marked as non-responding. We become the
+	 * owner for the reference the list had on any object we prune.
+	 */
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+
+	/*
+	 * Clean up the sas_device_init_list list as
+	 * driver goes for fresh scan as part of diag reset.
+	 */
+	list_for_each_entry_safe(sas_device, sas_device_next,
+	    &ioc->sas_device_init_list, list) {
+		list_del_init(&sas_device->list);
+		sas_device_put(sas_device);
+	}
+
+	list_for_each_entry_safe(sas_device, sas_device_next,
+	    &ioc->sas_device_list, list) {
+		if (!sas_device->responding)
+			list_move_tail(&sas_device->list, &head);
+		else
+			sas_device->responding = 0;
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	/*
+	 * Now, uninitialize and remove the unresponding devices we pruned.
+	 */
+	list_for_each_entry_safe(sas_device, sas_device_next, &head, list) {
+		_scsih_remove_device(ioc, sas_device);
+		list_del_init(&sas_device->list);
+		sas_device_put(sas_device);
+	}
+
+	ioc_info(ioc, "Removing unresponding devices: pcie end-devices\n");
+	INIT_LIST_HEAD(&head);
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	/*
+	 * Clean up the pcie_device_init_list list as
+	 * driver goes for fresh scan as part of diag reset.
+	 */
+	list_for_each_entry_safe(pcie_device, pcie_device_next,
+	    &ioc->pcie_device_init_list, list) {
+		list_del_init(&pcie_device->list);
+		pcie_device_put(pcie_device);
+	}
+
+	list_for_each_entry_safe(pcie_device, pcie_device_next,
+	    &ioc->pcie_device_list, list) {
+		if (!pcie_device->responding)
+			list_move_tail(&pcie_device->list, &head);
+		else
+			pcie_device->responding = 0;
+	}
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+	list_for_each_entry_safe(pcie_device, pcie_device_next, &head, list) {
+		_scsih_pcie_device_remove_from_sml(ioc, pcie_device);
+		list_del_init(&pcie_device->list);
+		pcie_device_put(pcie_device);
+	}
+
+	/* removing unresponding volumes */
+	if (ioc->ir_firmware) {
+		ioc_info(ioc, "removing unresponding devices: volumes\n");
+		list_for_each_entry_safe(raid_device, raid_device_next,
+		    &ioc->raid_device_list, list) {
+			if (!raid_device->responding)
+				_scsih_sas_volume_delete(ioc,
+				    raid_device->handle);
+			else
+				raid_device->responding = 0;
+		}
+	}
+
+	/* removing unresponding expanders */
+	ioc_info(ioc, "removing unresponding devices: expanders\n");
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	INIT_LIST_HEAD(&tmp_list);
+	list_for_each_entry_safe(sas_expander, sas_expander_next,
+	    &ioc->sas_expander_list, list) {
+		if (!sas_expander->responding)
+			list_move_tail(&sas_expander->list, &tmp_list);
+		else
+			sas_expander->responding = 0;
+	}
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+	list_for_each_entry_safe(sas_expander, sas_expander_next, &tmp_list,
+	    list) {
+		_scsih_expander_node_remove(ioc, sas_expander);
+	}
+
+	ioc_info(ioc, "removing unresponding devices: complete\n");
+
+	/* unblock devices */
+	_scsih_ublock_io_all_device(ioc);
+}
+
+static void
+_scsih_refresh_expander_links(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_expander, u16 handle)
+{
+	Mpi2ExpanderPage1_t expander_pg1;
+	Mpi2ConfigReply_t mpi_reply;
+	int i;
+
+	for (i = 0 ; i < sas_expander->num_phys ; i++) {
+		if ((mpt3sas_config_get_expander_pg1(ioc, &mpi_reply,
+		    &expander_pg1, i, handle))) {
+			ioc_err(ioc, "failure at %s:%d/%s()!\n",
+				__FILE__, __LINE__, __func__);
+			return;
+		}
+
+		mpt3sas_transport_update_links(ioc, sas_expander->sas_address,
+		    le16_to_cpu(expander_pg1.AttachedDevHandle), i,
+		    expander_pg1.NegotiatedLinkRate >> 4,
+		    sas_expander->port);
+	}
+}
+
+/**
+ * _scsih_scan_for_devices_after_reset - scan for devices after host reset
+ * @ioc: per adapter object
+ */
+static void
+_scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2ExpanderPage0_t expander_pg0;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	Mpi26PCIeDevicePage0_t pcie_device_pg0;
+	Mpi2RaidVolPage1_t *volume_pg1;
+	Mpi2RaidVolPage0_t *volume_pg0;
+	Mpi2RaidPhysDiskPage0_t pd_pg0;
+	Mpi2EventIrConfigElement_t element;
+	Mpi2ConfigReply_t mpi_reply;
+	u8 phys_disk_num, port_id;
+	u16 ioc_status;
+	u16 handle, parent_handle;
+	u64 sas_address;
+	struct _sas_device *sas_device;
+	struct _pcie_device *pcie_device;
+	struct _sas_node *expander_device;
+	static struct _raid_device *raid_device;
+	u8 retry_count;
+	unsigned long flags;
+
+	volume_pg0 = kzalloc(sizeof(*volume_pg0), GFP_KERNEL);
+	if (!volume_pg0)
+		return;
+
+	volume_pg1 = kzalloc(sizeof(*volume_pg1), GFP_KERNEL);
+	if (!volume_pg1) {
+		kfree(volume_pg0);
+		return;
+	}
+
+	ioc_info(ioc, "scan devices: start\n");
+
+	_scsih_sas_host_refresh(ioc);
+
+	ioc_info(ioc, "\tscan devices: expanders start\n");
+
+	/* expanders */
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
+	    MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			ioc_info(ioc, "\tbreak from expander scan: ioc_status(0x%04x), loginfo(0x%08x)\n",
+				 ioc_status, le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
+		handle = le16_to_cpu(expander_pg0.DevHandle);
+		spin_lock_irqsave(&ioc->sas_node_lock, flags);
+		port_id = expander_pg0.PhysicalPort;
+		expander_device = mpt3sas_scsih_expander_find_by_sas_address(
+		    ioc, le64_to_cpu(expander_pg0.SASAddress),
+		    mpt3sas_get_port_by_id(ioc, port_id, 0));
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		if (expander_device)
+			_scsih_refresh_expander_links(ioc, expander_device,
+			    handle);
+		else {
+			ioc_info(ioc, "\tBEFORE adding expander: handle (0x%04x), sas_addr(0x%016llx)\n",
+				 handle,
+				 (u64)le64_to_cpu(expander_pg0.SASAddress));
+			_scsih_expander_add(ioc, handle);
+			ioc_info(ioc, "\tAFTER adding expander: handle (0x%04x), sas_addr(0x%016llx)\n",
+				 handle,
+				 (u64)le64_to_cpu(expander_pg0.SASAddress));
+		}
+	}
+
+	ioc_info(ioc, "\tscan devices: expanders complete\n");
+
+	if (!ioc->ir_firmware)
+		goto skip_to_sas;
+
+	ioc_info(ioc, "\tscan devices: phys disk start\n");
+
+	/* phys disk */
+	phys_disk_num = 0xFF;
+	while (!(mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
+	    &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
+	    phys_disk_num))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			ioc_info(ioc, "\tbreak from phys disk scan: ioc_status(0x%04x), loginfo(0x%08x)\n",
+				 ioc_status, le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
+		phys_disk_num = pd_pg0.PhysDiskNum;
+		handle = le16_to_cpu(pd_pg0.DevHandle);
+		sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
+		if (sas_device) {
+			sas_device_put(sas_device);
+			continue;
+		}
+		if (mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+		    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
+		    handle) != 0)
+			continue;
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			ioc_info(ioc, "\tbreak from phys disk scan ioc_status(0x%04x), loginfo(0x%08x)\n",
+				 ioc_status, le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
+		parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
+		if (!_scsih_get_sas_address(ioc, parent_handle,
+		    &sas_address)) {
+			ioc_info(ioc, "\tBEFORE adding phys disk: handle (0x%04x), sas_addr(0x%016llx)\n",
+				 handle,
+				 (u64)le64_to_cpu(sas_device_pg0.SASAddress));
+			port_id = sas_device_pg0.PhysicalPort;
+			mpt3sas_transport_update_links(ioc, sas_address,
+			    handle, sas_device_pg0.PhyNum,
+			    MPI2_SAS_NEG_LINK_RATE_1_5,
+			    mpt3sas_get_port_by_id(ioc, port_id, 0));
+			set_bit(handle, ioc->pd_handles);
+			retry_count = 0;
+			/* This will retry adding the end device.
+			 * _scsih_add_device() will decide on retries and
+			 * return "1" when it should be retried
+			 */
+			while (_scsih_add_device(ioc, handle, retry_count++,
+			    1)) {
+				ssleep(1);
+			}
+			ioc_info(ioc, "\tAFTER adding phys disk: handle (0x%04x), sas_addr(0x%016llx)\n",
+				 handle,
+				 (u64)le64_to_cpu(sas_device_pg0.SASAddress));
+		}
+	}
+
+	ioc_info(ioc, "\tscan devices: phys disk complete\n");
+
+	ioc_info(ioc, "\tscan devices: volumes start\n");
+
+	/* volumes */
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+	    volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			ioc_info(ioc, "\tbreak from volume scan: ioc_status(0x%04x), loginfo(0x%08x)\n",
+				 ioc_status, le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
+		handle = le16_to_cpu(volume_pg1->DevHandle);
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		raid_device = _scsih_raid_device_find_by_wwid(ioc,
+		    le64_to_cpu(volume_pg1->WWID));
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+		if (raid_device)
+			continue;
+		if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply,
+		    volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
+		     sizeof(Mpi2RaidVolPage0_t)))
+			continue;
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			ioc_info(ioc, "\tbreak from volume scan: ioc_status(0x%04x), loginfo(0x%08x)\n",
+				 ioc_status, le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
+		if (volume_pg0->VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
+		    volume_pg0->VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
+		    volume_pg0->VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) {
+			memset(&element, 0, sizeof(Mpi2EventIrConfigElement_t));
+			element.ReasonCode = MPI2_EVENT_IR_CHANGE_RC_ADDED;
+			element.VolDevHandle = volume_pg1->DevHandle;
+			ioc_info(ioc, "\tBEFORE adding volume: handle (0x%04x)\n",
+				 volume_pg1->DevHandle);
+			_scsih_sas_volume_add(ioc, &element);
+			ioc_info(ioc, "\tAFTER adding volume: handle (0x%04x)\n",
+				 volume_pg1->DevHandle);
+		}
+	}
+
+	ioc_info(ioc, "\tscan devices: volumes complete\n");
+
+ skip_to_sas:
+
+	ioc_info(ioc, "\tscan devices: end devices start\n");
+
+	/* sas devices */
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+	    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
+	    handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			ioc_info(ioc, "\tbreak from end device scan: ioc_status(0x%04x), loginfo(0x%08x)\n",
+				 ioc_status, le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
+		handle = le16_to_cpu(sas_device_pg0.DevHandle);
+		if (!(_scsih_is_end_device(
+		    le32_to_cpu(sas_device_pg0.DeviceInfo))))
+			continue;
+		port_id = sas_device_pg0.PhysicalPort;
+		sas_device = mpt3sas_get_sdev_by_addr(ioc,
+		    le64_to_cpu(sas_device_pg0.SASAddress),
+		    mpt3sas_get_port_by_id(ioc, port_id, 0));
+		if (sas_device) {
+			sas_device_put(sas_device);
+			continue;
+		}
+		parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
+		if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) {
+			ioc_info(ioc, "\tBEFORE adding end device: handle (0x%04x), sas_addr(0x%016llx)\n",
+				 handle,
+				 (u64)le64_to_cpu(sas_device_pg0.SASAddress));
+			mpt3sas_transport_update_links(ioc, sas_address, handle,
+			    sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5,
+			    mpt3sas_get_port_by_id(ioc, port_id, 0));
+			retry_count = 0;
+			/* This will retry adding the end device.
+			 * _scsih_add_device() will decide on retries and
+			 * return "1" when it should be retried
+			 */
+			while (_scsih_add_device(ioc, handle, retry_count++,
+			    0)) {
+				ssleep(1);
+			}
+			ioc_info(ioc, "\tAFTER adding end device: handle (0x%04x), sas_addr(0x%016llx)\n",
+				 handle,
+				 (u64)le64_to_cpu(sas_device_pg0.SASAddress));
+		}
+	}
+	ioc_info(ioc, "\tscan devices: end devices complete\n");
+	ioc_info(ioc, "\tscan devices: pcie end devices start\n");
+
+	/* pcie devices */
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_pcie_device_pg0(ioc, &mpi_reply,
+		&pcie_device_pg0, MPI26_PCIE_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
+		handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus)
+				& MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			ioc_info(ioc, "\tbreak from pcie end device scan: ioc_status(0x%04x), loginfo(0x%08x)\n",
+				 ioc_status, le32_to_cpu(mpi_reply.IOCLogInfo));
+			break;
+		}
+		handle = le16_to_cpu(pcie_device_pg0.DevHandle);
+		if (!(_scsih_is_nvme_pciescsi_device(
+			le32_to_cpu(pcie_device_pg0.DeviceInfo))))
+			continue;
+		pcie_device = mpt3sas_get_pdev_by_wwid(ioc,
+				le64_to_cpu(pcie_device_pg0.WWID));
+		if (pcie_device) {
+			pcie_device_put(pcie_device);
+			continue;
+		}
+		retry_count = 0;
+		parent_handle = le16_to_cpu(pcie_device_pg0.ParentDevHandle);
+		_scsih_pcie_add_device(ioc, handle);
+
+		ioc_info(ioc, "\tAFTER adding pcie end device: handle (0x%04x), wwid(0x%016llx)\n",
+			 handle, (u64)le64_to_cpu(pcie_device_pg0.WWID));
+	}
+
+	kfree(volume_pg0);
+	kfree(volume_pg1);
+
+	ioc_info(ioc, "\tpcie devices: pcie end devices complete\n");
+	ioc_info(ioc, "scan devices: complete\n");
+}
+
+/**
+ * mpt3sas_scsih_pre_reset_handler - reset callback handler (for scsih)
+ * @ioc: per adapter object
+ *
+ * The handler for doing any required cleanup or initialization.
+ */
+void mpt3sas_scsih_pre_reset_handler(struct MPT3SAS_ADAPTER *ioc)
+{
+	dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_PRE_RESET\n", __func__));
+}
+
+/**
+ * mpt3sas_scsih_clear_outstanding_scsi_tm_commands - clears outstanding
+ *							scsi & tm cmds.
+ * @ioc: per adapter object
+ *
+ * The handler for doing any required cleanup or initialization.
+ */
+void
+mpt3sas_scsih_clear_outstanding_scsi_tm_commands(struct MPT3SAS_ADAPTER *ioc)
+{
+	dtmprintk(ioc,
+	    ioc_info(ioc, "%s: clear outstanding scsi & tm cmds\n", __func__));
+	if (ioc->scsih_cmds.status & MPT3_CMD_PENDING) {
+		ioc->scsih_cmds.status |= MPT3_CMD_RESET;
+		mpt3sas_base_free_smid(ioc, ioc->scsih_cmds.smid);
+		complete(&ioc->scsih_cmds.done);
+	}
+	if (ioc->tm_cmds.status & MPT3_CMD_PENDING) {
+		ioc->tm_cmds.status |= MPT3_CMD_RESET;
+		mpt3sas_base_free_smid(ioc, ioc->tm_cmds.smid);
+		complete(&ioc->tm_cmds.done);
+	}
+
+	memset(ioc->pend_os_device_add, 0, ioc->pend_os_device_add_sz);
+	memset(ioc->device_remove_in_progress, 0,
+	       ioc->device_remove_in_progress_sz);
+	_scsih_fw_event_cleanup_queue(ioc);
+	_scsih_flush_running_cmds(ioc);
+}
+
+/**
+ * mpt3sas_scsih_reset_done_handler - reset callback handler (for scsih)
+ * @ioc: per adapter object
+ *
+ * The handler for doing any required cleanup or initialization.
+ */
+void
+mpt3sas_scsih_reset_done_handler(struct MPT3SAS_ADAPTER *ioc)
+{
+	dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_DONE_RESET\n", __func__));
+	if (!(disable_discovery > 0 && !ioc->sas_hba.num_phys)) {
+		if (ioc->multipath_on_hba) {
+			_scsih_sas_port_refresh(ioc);
+			_scsih_update_vphys_after_reset(ioc);
+		}
+		_scsih_prep_device_scan(ioc);
+		_scsih_create_enclosure_list_after_reset(ioc);
+		_scsih_search_responding_sas_devices(ioc);
+		_scsih_search_responding_pcie_devices(ioc);
+		_scsih_search_responding_raid_devices(ioc);
+		_scsih_search_responding_expanders(ioc);
+		_scsih_error_recovery_delete_devices(ioc);
+	}
+}
+
+/**
+ * _mpt3sas_fw_work - delayed task for processing firmware events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ */
+static void
+_mpt3sas_fw_work(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
+{
+	ioc->current_event = fw_event;
+	_scsih_fw_event_del_from_list(ioc, fw_event);
+
+	/* the queue is being flushed so ignore this event */
+	if (ioc->remove_host || ioc->pci_error_recovery) {
+		fw_event_work_put(fw_event);
+		ioc->current_event = NULL;
+		return;
+	}
+
+	switch (fw_event->event) {
+	case MPT3SAS_PROCESS_TRIGGER_DIAG:
+		mpt3sas_process_trigger_data(ioc,
+			(struct SL_WH_TRIGGERS_EVENT_DATA_T *)
+			fw_event->event_data);
+		break;
+	case MPT3SAS_REMOVE_UNRESPONDING_DEVICES:
+		while (scsi_host_in_recovery(ioc->shost) ||
+					 ioc->shost_recovery) {
+			/*
+			 * If we're unloading or cancelling the work, bail.
+			 * Otherwise, this can become an infinite loop.
+			 */
+			if (ioc->remove_host || ioc->fw_events_cleanup)
+				goto out;
+			ssleep(1);
+		}
+		_scsih_remove_unresponding_devices(ioc);
+		_scsih_del_dirty_vphy(ioc);
+		_scsih_del_dirty_port_entries(ioc);
+		if (ioc->is_gen35_ioc)
+			_scsih_update_device_qdepth(ioc);
+		_scsih_scan_for_devices_after_reset(ioc);
+		/*
+		 * If diag reset has occurred during the driver load
+		 * then driver has to complete the driver load operation
+		 * by executing the following items:
+		 *- Register the devices from sas_device_init_list to SML
+		 *- clear is_driver_loading flag,
+		 *- start the watchdog thread.
+		 * In happy driver load path, above things are taken care of when
+		 * driver executes scsih_scan_finished().
+		 */
+		if (ioc->is_driver_loading)
+			_scsih_complete_devices_scanning(ioc);
+		_scsih_set_nvme_max_shutdown_latency(ioc);
+		break;
+	case MPT3SAS_PORT_ENABLE_COMPLETE:
+		ioc->start_scan = 0;
+		if (missing_delay[0] != -1 && missing_delay[1] != -1)
+			mpt3sas_base_update_missing_delay(ioc, missing_delay[0],
+			    missing_delay[1]);
+		dewtprintk(ioc,
+			   ioc_info(ioc, "port enable: complete from worker thread\n"));
+		break;
+	case MPT3SAS_TURN_ON_PFA_LED:
+		_scsih_turn_on_pfa_led(ioc, fw_event->device_handle);
+		break;
+	case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
+		_scsih_sas_topology_change_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
+		if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+			_scsih_sas_device_status_change_event_debug(ioc,
+			    (Mpi2EventDataSasDeviceStatusChange_t *)
+			    fw_event->event_data);
+		break;
+	case MPI2_EVENT_SAS_DISCOVERY:
+		_scsih_sas_discovery_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR:
+		_scsih_sas_device_discovery_error_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
+		_scsih_sas_broadcast_primitive_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
+		_scsih_sas_enclosure_dev_status_change_event(ioc,
+		    fw_event);
+		break;
+	case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
+		_scsih_sas_ir_config_change_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_IR_VOLUME:
+		_scsih_sas_ir_volume_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_IR_PHYSICAL_DISK:
+		_scsih_sas_ir_physical_disk_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_IR_OPERATION_STATUS:
+		_scsih_sas_ir_operation_status_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE:
+		_scsih_pcie_device_status_change_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_PCIE_ENUMERATION:
+		_scsih_pcie_enumeration_event(ioc, fw_event);
+		break;
+	case MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST:
+		_scsih_pcie_topology_change_event(ioc, fw_event);
+		ioc->current_event = NULL;
+		return;
+	}
+out:
+	fw_event_work_put(fw_event);
+	ioc->current_event = NULL;
+}
+
+/**
+ * _firmware_event_work
+ * @work: The fw_event_work object
+ * Context: user.
+ *
+ * wrappers for the work thread handling firmware events
+ */
+
+static void
+_firmware_event_work(struct work_struct *work)
+{
+	struct fw_event_work *fw_event = container_of(work,
+	    struct fw_event_work, work);
+
+	_mpt3sas_fw_work(fw_event->ioc, fw_event);
+}
+
+/**
+ * mpt3sas_scsih_event_callback - firmware event handler (called at ISR time)
+ * @ioc: per adapter object
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: interrupt.
+ *
+ * This function merely adds a new work task into ioc->firmware_event_thread.
+ * The tasks are worked from _firmware_event_work in user context.
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *         0 means the mf is freed from this function.
+ */
+u8
+mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
+	u32 reply)
+{
+	struct fw_event_work *fw_event;
+	Mpi2EventNotificationReply_t *mpi_reply;
+	u16 event;
+	u16 sz;
+	Mpi26EventDataActiveCableExcept_t *ActiveCableEventData;
+
+	/* events turned off due to host reset */
+	if (ioc->pci_error_recovery)
+		return 1;
+
+	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
+
+	if (unlikely(!mpi_reply)) {
+		ioc_err(ioc, "mpi_reply not valid at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return 1;
+	}
+
+	event = le16_to_cpu(mpi_reply->Event);
+
+	if (event != MPI2_EVENT_LOG_ENTRY_ADDED)
+		mpt3sas_trigger_event(ioc, event, 0);
+
+	switch (event) {
+	/* handle these */
+	case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
+	{
+		Mpi2EventDataSasBroadcastPrimitive_t *baen_data =
+		    (Mpi2EventDataSasBroadcastPrimitive_t *)
+		    mpi_reply->EventData;
+
+		if (baen_data->Primitive !=
+		    MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT)
+			return 1;
+
+		if (ioc->broadcast_aen_busy) {
+			ioc->broadcast_aen_pending++;
+			return 1;
+		} else
+			ioc->broadcast_aen_busy = 1;
+		break;
+	}
+
+	case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
+		_scsih_check_topo_delete_events(ioc,
+		    (Mpi2EventDataSasTopologyChangeList_t *)
+		    mpi_reply->EventData);
+		/*
+		 * No need to add the topology change list
+		 * event to fw event work queue when
+		 * diag reset is going on. Since during diag
+		 * reset driver scan the devices by reading
+		 * sas device page0's not by processing the
+		 * events.
+		 */
+		if (ioc->shost_recovery)
+			return 1;
+		break;
+	case MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST:
+	_scsih_check_pcie_topo_remove_events(ioc,
+		    (Mpi26EventDataPCIeTopologyChangeList_t *)
+		    mpi_reply->EventData);
+		if (ioc->shost_recovery)
+			return 1;
+		break;
+	case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
+		_scsih_check_ir_config_unhide_events(ioc,
+		    (Mpi2EventDataIrConfigChangeList_t *)
+		    mpi_reply->EventData);
+		break;
+	case MPI2_EVENT_IR_VOLUME:
+		_scsih_check_volume_delete_events(ioc,
+		    (Mpi2EventDataIrVolume_t *)
+		    mpi_reply->EventData);
+		break;
+	case MPI2_EVENT_LOG_ENTRY_ADDED:
+	{
+		Mpi2EventDataLogEntryAdded_t *log_entry;
+		u32 log_code;
+
+		if (!ioc->is_warpdrive)
+			break;
+
+		log_entry = (Mpi2EventDataLogEntryAdded_t *)
+		    mpi_reply->EventData;
+		log_code = le32_to_cpu(*(__le32 *)log_entry->LogData);
+
+		if (le16_to_cpu(log_entry->LogEntryQualifier)
+		    != MPT2_WARPDRIVE_LOGENTRY)
+			break;
+
+		switch (log_code) {
+		case MPT2_WARPDRIVE_LC_SSDT:
+			ioc_warn(ioc, "WarpDrive Warning: IO Throttling has occurred in the WarpDrive subsystem. Check WarpDrive documentation for additional details.\n");
+			break;
+		case MPT2_WARPDRIVE_LC_SSDLW:
+			ioc_warn(ioc, "WarpDrive Warning: Program/Erase Cycles for the WarpDrive subsystem in degraded range. Check WarpDrive documentation for additional details.\n");
+			break;
+		case MPT2_WARPDRIVE_LC_SSDLF:
+			ioc_err(ioc, "WarpDrive Fatal Error: There are no Program/Erase Cycles for the WarpDrive subsystem. The storage device will be in read-only mode. Check WarpDrive documentation for additional details.\n");
+			break;
+		case MPT2_WARPDRIVE_LC_BRMF:
+			ioc_err(ioc, "WarpDrive Fatal Error: The Backup Rail Monitor has failed on the WarpDrive subsystem. Check WarpDrive documentation for additional details.\n");
+			break;
+		}
+
+		break;
+	}
+	case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
+		_scsih_sas_device_status_change_event(ioc,
+		    (Mpi2EventDataSasDeviceStatusChange_t *)
+		    mpi_reply->EventData);
+		break;
+	case MPI2_EVENT_IR_OPERATION_STATUS:
+	case MPI2_EVENT_SAS_DISCOVERY:
+	case MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR:
+	case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
+	case MPI2_EVENT_IR_PHYSICAL_DISK:
+	case MPI2_EVENT_PCIE_ENUMERATION:
+	case MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE:
+		break;
+
+	case MPI2_EVENT_TEMP_THRESHOLD:
+		_scsih_temp_threshold_events(ioc,
+			(Mpi2EventDataTemperature_t *)
+			mpi_reply->EventData);
+		break;
+	case MPI2_EVENT_ACTIVE_CABLE_EXCEPTION:
+		ActiveCableEventData =
+		    (Mpi26EventDataActiveCableExcept_t *) mpi_reply->EventData;
+		switch (ActiveCableEventData->ReasonCode) {
+		case MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER:
+			ioc_notice(ioc, "Currently an active cable with ReceptacleID %d\n",
+				   ActiveCableEventData->ReceptacleID);
+			pr_notice("cannot be powered and devices connected\n");
+			pr_notice("to this active cable will not be seen\n");
+			pr_notice("This active cable requires %d mW of power\n",
+			    le32_to_cpu(
+			    ActiveCableEventData->ActiveCablePowerRequirement));
+			break;
+
+		case MPI26_EVENT_ACTIVE_CABLE_DEGRADED:
+			ioc_notice(ioc, "Currently a cable with ReceptacleID %d\n",
+				   ActiveCableEventData->ReceptacleID);
+			pr_notice(
+			    "is not running at optimal speed(12 Gb/s rate)\n");
+			break;
+		}
+
+		break;
+
+	default: /* ignore the rest */
+		return 1;
+	}
+
+	sz = le16_to_cpu(mpi_reply->EventDataLength) * 4;
+	fw_event = alloc_fw_event_work(sz);
+	if (!fw_event) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return 1;
+	}
+
+	memcpy(fw_event->event_data, mpi_reply->EventData, sz);
+	fw_event->ioc = ioc;
+	fw_event->VF_ID = mpi_reply->VF_ID;
+	fw_event->VP_ID = mpi_reply->VP_ID;
+	fw_event->event = event;
+	_scsih_fw_event_add(ioc, fw_event);
+	fw_event_work_put(fw_event);
+	return 1;
+}
+
+/**
+ * _scsih_expander_node_remove - removing expander device from list.
+ * @ioc: per adapter object
+ * @sas_expander: the sas_device object
+ *
+ * Removing object and freeing associated memory from the
+ * ioc->sas_expander_list.
+ */
+static void
+_scsih_expander_node_remove(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_expander)
+{
+	struct _sas_port *mpt3sas_port, *next;
+	unsigned long flags;
+	int port_id;
+
+	/* remove sibling ports attached to this expander */
+	list_for_each_entry_safe(mpt3sas_port, next,
+	   &sas_expander->sas_port_list, port_list) {
+		if (ioc->shost_recovery)
+			return;
+		if (mpt3sas_port->remote_identify.device_type ==
+		    SAS_END_DEVICE)
+			mpt3sas_device_remove_by_sas_address(ioc,
+			    mpt3sas_port->remote_identify.sas_address,
+			    mpt3sas_port->hba_port);
+		else if (mpt3sas_port->remote_identify.device_type ==
+		    SAS_EDGE_EXPANDER_DEVICE ||
+		    mpt3sas_port->remote_identify.device_type ==
+		    SAS_FANOUT_EXPANDER_DEVICE)
+			mpt3sas_expander_remove(ioc,
+			    mpt3sas_port->remote_identify.sas_address,
+			    mpt3sas_port->hba_port);
+	}
+
+	port_id = sas_expander->port->port_id;
+
+	mpt3sas_transport_port_remove(ioc, sas_expander->sas_address,
+	    sas_expander->sas_address_parent, sas_expander->port);
+
+	ioc_info(ioc,
+	    "expander_remove: handle(0x%04x), sas_addr(0x%016llx), port:%d\n",
+	    sas_expander->handle, (unsigned long long)
+	    sas_expander->sas_address,
+	    port_id);
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	list_del(&sas_expander->list);
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	kfree(sas_expander->phy);
+	kfree(sas_expander);
+}
+
+/**
+ * _scsih_nvme_shutdown - NVMe shutdown notification
+ * @ioc: per adapter object
+ *
+ * Sending IoUnitControl request with shutdown operation code to alert IOC that
+ * the host system is shutting down so that IOC can issue NVMe shutdown to
+ * NVMe drives attached to it.
+ */
+static void
+_scsih_nvme_shutdown(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi26IoUnitControlRequest_t *mpi_request;
+	Mpi26IoUnitControlReply_t *mpi_reply;
+	u16 smid;
+
+	/* are there any NVMe devices ? */
+	if (list_empty(&ioc->pcie_device_list))
+		return;
+
+	mutex_lock(&ioc->scsih_cmds.mutex);
+
+	if (ioc->scsih_cmds.status != MPT3_CMD_NOT_USED) {
+		ioc_err(ioc, "%s: scsih_cmd in use\n", __func__);
+		goto out;
+	}
+
+	ioc->scsih_cmds.status = MPT3_CMD_PENDING;
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->scsih_cb_idx);
+	if (!smid) {
+		ioc_err(ioc,
+		    "%s: failed obtaining a smid\n", __func__);
+		ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+		goto out;
+	}
+
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->scsih_cmds.smid = smid;
+	memset(mpi_request, 0, sizeof(Mpi26IoUnitControlRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_IO_UNIT_CONTROL;
+	mpi_request->Operation = MPI26_CTRL_OP_SHUTDOWN;
+
+	init_completion(&ioc->scsih_cmds.done);
+	ioc->put_smid_default(ioc, smid);
+	/* Wait for max_shutdown_latency seconds */
+	ioc_info(ioc,
+		"Io Unit Control shutdown (sending), Shutdown latency %d sec\n",
+		ioc->max_shutdown_latency);
+	wait_for_completion_timeout(&ioc->scsih_cmds.done,
+			ioc->max_shutdown_latency*HZ);
+
+	if (!(ioc->scsih_cmds.status & MPT3_CMD_COMPLETE)) {
+		ioc_err(ioc, "%s: timeout\n", __func__);
+		goto out;
+	}
+
+	if (ioc->scsih_cmds.status & MPT3_CMD_REPLY_VALID) {
+		mpi_reply = ioc->scsih_cmds.reply;
+		ioc_info(ioc, "Io Unit Control shutdown (complete):"
+			"ioc_status(0x%04x), loginfo(0x%08x)\n",
+			le16_to_cpu(mpi_reply->IOCStatus),
+			le32_to_cpu(mpi_reply->IOCLogInfo));
+	}
+ out:
+	ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+	mutex_unlock(&ioc->scsih_cmds.mutex);
+}
+
+
+/**
+ * _scsih_ir_shutdown - IR shutdown notification
+ * @ioc: per adapter object
+ *
+ * Sending RAID Action to alert the Integrated RAID subsystem of the IOC that
+ * the host system is shutting down.
+ */
+static void
+_scsih_ir_shutdown(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2RaidActionRequest_t *mpi_request;
+	Mpi2RaidActionReply_t *mpi_reply;
+	u16 smid;
+
+	/* is IR firmware build loaded ? */
+	if (!ioc->ir_firmware)
+		return;
+
+	/* are there any volumes ? */
+	if (list_empty(&ioc->raid_device_list))
+		return;
+
+	mutex_lock(&ioc->scsih_cmds.mutex);
+
+	if (ioc->scsih_cmds.status != MPT3_CMD_NOT_USED) {
+		ioc_err(ioc, "%s: scsih_cmd in use\n", __func__);
+		goto out;
+	}
+	ioc->scsih_cmds.status = MPT3_CMD_PENDING;
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->scsih_cb_idx);
+	if (!smid) {
+		ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
+		ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+		goto out;
+	}
+
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->scsih_cmds.smid = smid;
+	memset(mpi_request, 0, sizeof(Mpi2RaidActionRequest_t));
+
+	mpi_request->Function = MPI2_FUNCTION_RAID_ACTION;
+	mpi_request->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED;
+
+	if (!ioc->hide_ir_msg)
+		ioc_info(ioc, "IR shutdown (sending)\n");
+	init_completion(&ioc->scsih_cmds.done);
+	ioc->put_smid_default(ioc, smid);
+	wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ);
+
+	if (!(ioc->scsih_cmds.status & MPT3_CMD_COMPLETE)) {
+		ioc_err(ioc, "%s: timeout\n", __func__);
+		goto out;
+	}
+
+	if (ioc->scsih_cmds.status & MPT3_CMD_REPLY_VALID) {
+		mpi_reply = ioc->scsih_cmds.reply;
+		if (!ioc->hide_ir_msg)
+			ioc_info(ioc, "IR shutdown (complete): ioc_status(0x%04x), loginfo(0x%08x)\n",
+				 le16_to_cpu(mpi_reply->IOCStatus),
+				 le32_to_cpu(mpi_reply->IOCLogInfo));
+	}
+
+ out:
+	ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
+	mutex_unlock(&ioc->scsih_cmds.mutex);
+}
+
+/**
+ * _scsih_get_shost_and_ioc - get shost and ioc
+ *			and verify whether they are NULL or not
+ * @pdev: PCI device struct
+ * @shost: address of scsi host pointer
+ * @ioc: address of HBA adapter pointer
+ *
+ * Return zero if *shost and *ioc are not NULL otherwise return error number.
+ */
+static int
+_scsih_get_shost_and_ioc(struct pci_dev *pdev,
+	struct Scsi_Host **shost, struct MPT3SAS_ADAPTER **ioc)
+{
+	*shost = pci_get_drvdata(pdev);
+	if (*shost == NULL) {
+		dev_err(&pdev->dev, "pdev's driver data is null\n");
+		return -ENXIO;
+	}
+
+	*ioc = shost_priv(*shost);
+	if (*ioc == NULL) {
+		dev_err(&pdev->dev, "shost's private data is null\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+/**
+ * scsih_remove - detach and remove add host
+ * @pdev: PCI device struct
+ *
+ * Routine called when unloading the driver.
+ */
+static void scsih_remove(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost;
+	struct MPT3SAS_ADAPTER *ioc;
+	struct _sas_port *mpt3sas_port, *next_port;
+	struct _raid_device *raid_device, *next;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	struct _pcie_device *pcie_device, *pcienext;
+	struct workqueue_struct	*wq;
+	unsigned long flags;
+	Mpi2ConfigReply_t mpi_reply;
+	struct hba_port *port, *port_next;
+
+	if (_scsih_get_shost_and_ioc(pdev, &shost, &ioc))
+		return;
+
+	ioc->remove_host = 1;
+
+	if (!pci_device_is_present(pdev)) {
+		mpt3sas_base_pause_mq_polling(ioc);
+		_scsih_flush_running_cmds(ioc);
+	}
+
+	_scsih_fw_event_cleanup_queue(ioc);
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	wq = ioc->firmware_event_thread;
+	ioc->firmware_event_thread = NULL;
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+	if (wq)
+		destroy_workqueue(wq);
+	/*
+	 * Copy back the unmodified ioc page1. so that on next driver load,
+	 * current modified changes on ioc page1 won't take effect.
+	 */
+	if (ioc->is_aero_ioc)
+		mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply,
+				&ioc->ioc_pg1_copy);
+	/* release all the volumes */
+	_scsih_ir_shutdown(ioc);
+	mpt3sas_destroy_debugfs(ioc);
+	sas_remove_host(shost);
+	list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list,
+	    list) {
+		if (raid_device->starget) {
+			sas_target_priv_data =
+			    raid_device->starget->hostdata;
+			sas_target_priv_data->deleted = 1;
+			scsi_remove_target(&raid_device->starget->dev);
+		}
+		ioc_info(ioc, "removing handle(0x%04x), wwid(0x%016llx)\n",
+			 raid_device->handle, (u64)raid_device->wwid);
+		_scsih_raid_device_remove(ioc, raid_device);
+	}
+	list_for_each_entry_safe(pcie_device, pcienext, &ioc->pcie_device_list,
+		list) {
+		_scsih_pcie_device_remove_from_sml(ioc, pcie_device);
+		list_del_init(&pcie_device->list);
+		pcie_device_put(pcie_device);
+	}
+
+	/* free ports attached to the sas_host */
+	list_for_each_entry_safe(mpt3sas_port, next_port,
+	   &ioc->sas_hba.sas_port_list, port_list) {
+		if (mpt3sas_port->remote_identify.device_type ==
+		    SAS_END_DEVICE)
+			mpt3sas_device_remove_by_sas_address(ioc,
+			    mpt3sas_port->remote_identify.sas_address,
+			    mpt3sas_port->hba_port);
+		else if (mpt3sas_port->remote_identify.device_type ==
+		    SAS_EDGE_EXPANDER_DEVICE ||
+		    mpt3sas_port->remote_identify.device_type ==
+		    SAS_FANOUT_EXPANDER_DEVICE)
+			mpt3sas_expander_remove(ioc,
+			    mpt3sas_port->remote_identify.sas_address,
+			    mpt3sas_port->hba_port);
+	}
+
+	list_for_each_entry_safe(port, port_next,
+	    &ioc->port_table_list, list) {
+		list_del(&port->list);
+		kfree(port);
+	}
+
+	/* free phys attached to the sas_host */
+	if (ioc->sas_hba.num_phys) {
+		kfree(ioc->sas_hba.phy);
+		ioc->sas_hba.phy = NULL;
+		ioc->sas_hba.num_phys = 0;
+	}
+
+	mpt3sas_base_detach(ioc);
+	spin_lock(&gioc_lock);
+	list_del(&ioc->list);
+	spin_unlock(&gioc_lock);
+	scsi_host_put(shost);
+}
+
+/**
+ * scsih_shutdown - routine call during system shutdown
+ * @pdev: PCI device struct
+ */
+static void
+scsih_shutdown(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost;
+	struct MPT3SAS_ADAPTER *ioc;
+	struct workqueue_struct	*wq;
+	unsigned long flags;
+	Mpi2ConfigReply_t mpi_reply;
+
+	if (_scsih_get_shost_and_ioc(pdev, &shost, &ioc))
+		return;
+
+	ioc->remove_host = 1;
+
+	if (!pci_device_is_present(pdev)) {
+		mpt3sas_base_pause_mq_polling(ioc);
+		_scsih_flush_running_cmds(ioc);
+	}
+
+	_scsih_fw_event_cleanup_queue(ioc);
+
+	spin_lock_irqsave(&ioc->fw_event_lock, flags);
+	wq = ioc->firmware_event_thread;
+	ioc->firmware_event_thread = NULL;
+	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+	if (wq)
+		destroy_workqueue(wq);
+	/*
+	 * Copy back the unmodified ioc page1 so that on next driver load,
+	 * current modified changes on ioc page1 won't take effect.
+	 */
+	if (ioc->is_aero_ioc)
+		mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply,
+				&ioc->ioc_pg1_copy);
+
+	_scsih_ir_shutdown(ioc);
+	_scsih_nvme_shutdown(ioc);
+	mpt3sas_base_mask_interrupts(ioc);
+	mpt3sas_base_stop_watchdog(ioc);
+	ioc->shost_recovery = 1;
+	mpt3sas_base_make_ioc_ready(ioc, SOFT_RESET);
+	ioc->shost_recovery = 0;
+	mpt3sas_base_free_irq(ioc);
+	mpt3sas_base_disable_msix(ioc);
+}
+
+
+/**
+ * _scsih_probe_boot_devices - reports 1st device
+ * @ioc: per adapter object
+ *
+ * If specified in bios page 2, this routine reports the 1st
+ * device scsi-ml or sas transport for persistent boot device
+ * purposes.  Please refer to function _scsih_determine_boot_device()
+ */
+static void
+_scsih_probe_boot_devices(struct MPT3SAS_ADAPTER *ioc)
+{
+	u32 channel;
+	void *device;
+	struct _sas_device *sas_device;
+	struct _raid_device *raid_device;
+	struct _pcie_device *pcie_device;
+	u16 handle;
+	u64 sas_address_parent;
+	u64 sas_address;
+	unsigned long flags;
+	int rc;
+	int tid;
+	struct hba_port *port;
+
+	 /* no Bios, return immediately */
+	if (!ioc->bios_pg3.BiosVersion)
+		return;
+
+	device = NULL;
+	if (ioc->req_boot_device.device) {
+		device =  ioc->req_boot_device.device;
+		channel = ioc->req_boot_device.channel;
+	} else if (ioc->req_alt_boot_device.device) {
+		device =  ioc->req_alt_boot_device.device;
+		channel = ioc->req_alt_boot_device.channel;
+	} else if (ioc->current_boot_device.device) {
+		device =  ioc->current_boot_device.device;
+		channel = ioc->current_boot_device.channel;
+	}
+
+	if (!device)
+		return;
+
+	if (channel == RAID_CHANNEL) {
+		raid_device = device;
+		/*
+		 * If this boot vd is already registered with SML then
+		 * no need to register it again as part of device scanning
+		 * after diag reset during driver load operation.
+		 */
+		if (raid_device->starget)
+			return;
+		rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
+		    raid_device->id, 0);
+		if (rc)
+			_scsih_raid_device_remove(ioc, raid_device);
+	} else if (channel == PCIE_CHANNEL) {
+		pcie_device = device;
+		/*
+		 * If this boot NVMe device is already registered with SML then
+		 * no need to register it again as part of device scanning
+		 * after diag reset during driver load operation.
+		 */
+		if (pcie_device->starget)
+			return;
+		spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+		tid = pcie_device->id;
+		list_move_tail(&pcie_device->list, &ioc->pcie_device_list);
+		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+		rc = scsi_add_device(ioc->shost, PCIE_CHANNEL, tid, 0);
+		if (rc)
+			_scsih_pcie_device_remove(ioc, pcie_device);
+	} else {
+		sas_device = device;
+		/*
+		 * If this boot sas/sata device is already registered with SML
+		 * then no need to register it again as part of device scanning
+		 * after diag reset during driver load operation.
+		 */
+		if (sas_device->starget)
+			return;
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		handle = sas_device->handle;
+		sas_address_parent = sas_device->sas_address_parent;
+		sas_address = sas_device->sas_address;
+		port = sas_device->port;
+		list_move_tail(&sas_device->list, &ioc->sas_device_list);
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+		if (ioc->hide_drives)
+			return;
+
+		if (!port)
+			return;
+
+		if (!mpt3sas_transport_port_add(ioc, handle,
+		    sas_address_parent, port)) {
+			_scsih_sas_device_remove(ioc, sas_device);
+		} else if (!sas_device->starget) {
+			if (!ioc->is_driver_loading) {
+				mpt3sas_transport_port_remove(ioc,
+				    sas_address,
+				    sas_address_parent, port);
+				_scsih_sas_device_remove(ioc, sas_device);
+			}
+		}
+	}
+}
+
+/**
+ * _scsih_probe_raid - reporting raid volumes to scsi-ml
+ * @ioc: per adapter object
+ *
+ * Called during initial loading of the driver.
+ */
+static void
+_scsih_probe_raid(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct _raid_device *raid_device, *raid_next;
+	int rc;
+
+	list_for_each_entry_safe(raid_device, raid_next,
+	    &ioc->raid_device_list, list) {
+		if (raid_device->starget)
+			continue;
+		rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
+		    raid_device->id, 0);
+		if (rc)
+			_scsih_raid_device_remove(ioc, raid_device);
+	}
+}
+
+static struct _sas_device *get_next_sas_device(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct _sas_device *sas_device = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	if (!list_empty(&ioc->sas_device_init_list)) {
+		sas_device = list_first_entry(&ioc->sas_device_init_list,
+				struct _sas_device, list);
+		sas_device_get(sas_device);
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+	return sas_device;
+}
+
+static void sas_device_make_active(struct MPT3SAS_ADAPTER *ioc,
+		struct _sas_device *sas_device)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+
+	/*
+	 * Since we dropped the lock during the call to port_add(), we need to
+	 * be careful here that somebody else didn't move or delete this item
+	 * while we were busy with other things.
+	 *
+	 * If it was on the list, we need a put() for the reference the list
+	 * had. Either way, we need a get() for the destination list.
+	 */
+	if (!list_empty(&sas_device->list)) {
+		list_del_init(&sas_device->list);
+		sas_device_put(sas_device);
+	}
+
+	sas_device_get(sas_device);
+	list_add_tail(&sas_device->list, &ioc->sas_device_list);
+
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+}
+
+/**
+ * _scsih_probe_sas - reporting sas devices to sas transport
+ * @ioc: per adapter object
+ *
+ * Called during initial loading of the driver.
+ */
+static void
+_scsih_probe_sas(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct _sas_device *sas_device;
+
+	if (ioc->hide_drives)
+		return;
+
+	while ((sas_device = get_next_sas_device(ioc))) {
+		if (!mpt3sas_transport_port_add(ioc, sas_device->handle,
+		    sas_device->sas_address_parent, sas_device->port)) {
+			_scsih_sas_device_remove(ioc, sas_device);
+			sas_device_put(sas_device);
+			continue;
+		} else if (!sas_device->starget) {
+			/*
+			 * When asyn scanning is enabled, its not possible to
+			 * remove devices while scanning is turned on due to an
+			 * oops in scsi_sysfs_add_sdev()->add_device()->
+			 * sysfs_addrm_start()
+			 */
+			if (!ioc->is_driver_loading) {
+				mpt3sas_transport_port_remove(ioc,
+				    sas_device->sas_address,
+				    sas_device->sas_address_parent,
+				    sas_device->port);
+				_scsih_sas_device_remove(ioc, sas_device);
+				sas_device_put(sas_device);
+				continue;
+			}
+		}
+		sas_device_make_active(ioc, sas_device);
+		sas_device_put(sas_device);
+	}
+}
+
+/**
+ * get_next_pcie_device - Get the next pcie device
+ * @ioc: per adapter object
+ *
+ * Get the next pcie device from pcie_device_init_list list.
+ *
+ * Return: pcie device structure if pcie_device_init_list list is not empty
+ * otherwise returns NULL
+ */
+static struct _pcie_device *get_next_pcie_device(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct _pcie_device *pcie_device = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	if (!list_empty(&ioc->pcie_device_init_list)) {
+		pcie_device = list_first_entry(&ioc->pcie_device_init_list,
+				struct _pcie_device, list);
+		pcie_device_get(pcie_device);
+	}
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+	return pcie_device;
+}
+
+/**
+ * pcie_device_make_active - Add pcie device to pcie_device_list list
+ * @ioc: per adapter object
+ * @pcie_device: pcie device object
+ *
+ * Add the pcie device which has registered with SCSI Transport Later to
+ * pcie_device_list list
+ */
+static void pcie_device_make_active(struct MPT3SAS_ADAPTER *ioc,
+		struct _pcie_device *pcie_device)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+
+	if (!list_empty(&pcie_device->list)) {
+		list_del_init(&pcie_device->list);
+		pcie_device_put(pcie_device);
+	}
+	pcie_device_get(pcie_device);
+	list_add_tail(&pcie_device->list, &ioc->pcie_device_list);
+
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+}
+
+/**
+ * _scsih_probe_pcie - reporting PCIe devices to scsi-ml
+ * @ioc: per adapter object
+ *
+ * Called during initial loading of the driver.
+ */
+static void
+_scsih_probe_pcie(struct MPT3SAS_ADAPTER *ioc)
+{
+	struct _pcie_device *pcie_device;
+	int rc;
+
+	/* PCIe Device List */
+	while ((pcie_device = get_next_pcie_device(ioc))) {
+		if (pcie_device->starget) {
+			pcie_device_put(pcie_device);
+			continue;
+		}
+		if (pcie_device->access_status ==
+		    MPI26_PCIEDEV0_ASTATUS_DEVICE_BLOCKED) {
+			pcie_device_make_active(ioc, pcie_device);
+			pcie_device_put(pcie_device);
+			continue;
+		}
+		rc = scsi_add_device(ioc->shost, PCIE_CHANNEL,
+			pcie_device->id, 0);
+		if (rc) {
+			_scsih_pcie_device_remove(ioc, pcie_device);
+			pcie_device_put(pcie_device);
+			continue;
+		} else if (!pcie_device->starget) {
+			/*
+			 * When async scanning is enabled, its not possible to
+			 * remove devices while scanning is turned on due to an
+			 * oops in scsi_sysfs_add_sdev()->add_device()->
+			 * sysfs_addrm_start()
+			 */
+			if (!ioc->is_driver_loading) {
+			/* TODO-- Need to find out whether this condition will
+			 * occur or not
+			 */
+				_scsih_pcie_device_remove(ioc, pcie_device);
+				pcie_device_put(pcie_device);
+				continue;
+			}
+		}
+		pcie_device_make_active(ioc, pcie_device);
+		pcie_device_put(pcie_device);
+	}
+}
+
+/**
+ * _scsih_probe_devices - probing for devices
+ * @ioc: per adapter object
+ *
+ * Called during initial loading of the driver.
+ */
+static void
+_scsih_probe_devices(struct MPT3SAS_ADAPTER *ioc)
+{
+	u16 volume_mapping_flags;
+
+	if (!(ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR))
+		return;  /* return when IOC doesn't support initiator mode */
+
+	_scsih_probe_boot_devices(ioc);
+
+	if (ioc->ir_firmware) {
+		volume_mapping_flags =
+		    le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) &
+		    MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
+		if (volume_mapping_flags ==
+		    MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) {
+			_scsih_probe_raid(ioc);
+			_scsih_probe_sas(ioc);
+		} else {
+			_scsih_probe_sas(ioc);
+			_scsih_probe_raid(ioc);
+		}
+	} else {
+		_scsih_probe_sas(ioc);
+		_scsih_probe_pcie(ioc);
+	}
+}
+
+/**
+ * scsih_scan_start - scsi lld callback for .scan_start
+ * @shost: SCSI host pointer
+ *
+ * The shost has the ability to discover targets on its own instead
+ * of scanning the entire bus.  In our implemention, we will kick off
+ * firmware discovery.
+ */
+static void
+scsih_scan_start(struct Scsi_Host *shost)
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	int rc;
+	if (diag_buffer_enable != -1 && diag_buffer_enable != 0)
+		mpt3sas_enable_diag_buffer(ioc, diag_buffer_enable);
+	else if (ioc->manu_pg11.HostTraceBufferMaxSizeKB != 0)
+		mpt3sas_enable_diag_buffer(ioc, 1);
+
+	if (disable_discovery > 0)
+		return;
+
+	ioc->start_scan = 1;
+	rc = mpt3sas_port_enable(ioc);
+
+	if (rc != 0)
+		ioc_info(ioc, "port enable: FAILED\n");
+}
+
+/**
+ * _scsih_complete_devices_scanning - add the devices to sml and
+ * complete ioc initialization.
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+static void _scsih_complete_devices_scanning(struct MPT3SAS_ADAPTER *ioc)
+{
+
+	if (ioc->wait_for_discovery_to_complete) {
+		ioc->wait_for_discovery_to_complete = 0;
+		_scsih_probe_devices(ioc);
+	}
+
+	mpt3sas_base_start_watchdog(ioc);
+	ioc->is_driver_loading = 0;
+}
+
+/**
+ * scsih_scan_finished - scsi lld callback for .scan_finished
+ * @shost: SCSI host pointer
+ * @time: elapsed time of the scan in jiffies
+ *
+ * This function will be called periodicallyn until it returns 1 with the
+ * scsi_host and the elapsed time of the scan in jiffies. In our implemention,
+ * we wait for firmware discovery to complete, then return 1.
+ */
+static int
+scsih_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	u32 ioc_state;
+	int issue_hard_reset = 0;
+
+	if (disable_discovery > 0) {
+		ioc->is_driver_loading = 0;
+		ioc->wait_for_discovery_to_complete = 0;
+		return 1;
+	}
+
+	if (time >= (300 * HZ)) {
+		ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED;
+		ioc_info(ioc, "port enable: FAILED with timeout (timeout=300s)\n");
+		ioc->is_driver_loading = 0;
+		return 1;
+	}
+
+	if (ioc->start_scan) {
+		ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+		if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
+			mpt3sas_print_fault_code(ioc, ioc_state &
+			    MPI2_DOORBELL_DATA_MASK);
+			issue_hard_reset = 1;
+			goto out;
+		} else if ((ioc_state & MPI2_IOC_STATE_MASK) ==
+				MPI2_IOC_STATE_COREDUMP) {
+			mpt3sas_base_coredump_info(ioc, ioc_state &
+			    MPI2_DOORBELL_DATA_MASK);
+			mpt3sas_base_wait_for_coredump_completion(ioc, __func__);
+			issue_hard_reset = 1;
+			goto out;
+		}
+		return 0;
+	}
+
+	if (ioc->port_enable_cmds.status & MPT3_CMD_RESET) {
+		ioc_info(ioc,
+		    "port enable: aborted due to diag reset\n");
+		ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED;
+		goto out;
+	}
+	if (ioc->start_scan_failed) {
+		ioc_info(ioc, "port enable: FAILED with (ioc_status=0x%08x)\n",
+			 ioc->start_scan_failed);
+		ioc->is_driver_loading = 0;
+		ioc->wait_for_discovery_to_complete = 0;
+		ioc->remove_host = 1;
+		return 1;
+	}
+
+	ioc_info(ioc, "port enable: SUCCESS\n");
+	ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED;
+	_scsih_complete_devices_scanning(ioc);
+
+out:
+	if (issue_hard_reset) {
+		ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED;
+		if (mpt3sas_base_hard_reset_handler(ioc, SOFT_RESET))
+			ioc->is_driver_loading = 0;
+	}
+	return 1;
+}
+
+/**
+ * scsih_map_queues - map reply queues with request queues
+ * @shost: SCSI host pointer
+ */
+static void scsih_map_queues(struct Scsi_Host *shost)
+{
+	struct MPT3SAS_ADAPTER *ioc =
+	    (struct MPT3SAS_ADAPTER *)shost->hostdata;
+	struct blk_mq_queue_map *map;
+	int i, qoff, offset;
+	int nr_msix_vectors = ioc->iopoll_q_start_index;
+	int iopoll_q_count = ioc->reply_queue_count - nr_msix_vectors;
+
+	if (shost->nr_hw_queues == 1)
+		return;
+
+	for (i = 0, qoff = 0; i < shost->nr_maps; i++) {
+		map = &shost->tag_set.map[i];
+		map->nr_queues = 0;
+		offset = 0;
+		if (i == HCTX_TYPE_DEFAULT) {
+			map->nr_queues =
+			    nr_msix_vectors - ioc->high_iops_queues;
+			offset = ioc->high_iops_queues;
+		} else if (i == HCTX_TYPE_POLL)
+			map->nr_queues = iopoll_q_count;
+
+		if (!map->nr_queues)
+			BUG_ON(i == HCTX_TYPE_DEFAULT);
+
+		/*
+		 * The poll queue(s) doesn't have an IRQ (and hence IRQ
+		 * affinity), so use the regular blk-mq cpu mapping
+		 */
+		map->queue_offset = qoff;
+		if (i != HCTX_TYPE_POLL)
+			blk_mq_pci_map_queues(map, ioc->pdev, offset);
+		else
+			blk_mq_map_queues(map);
+
+		qoff += map->nr_queues;
+	}
+}
+
+/* shost template for SAS 2.0 HBA devices */
+static const struct scsi_host_template mpt2sas_driver_template = {
+	.module				= THIS_MODULE,
+	.name				= "Fusion MPT SAS Host",
+	.proc_name			= MPT2SAS_DRIVER_NAME,
+	.queuecommand			= scsih_qcmd,
+	.target_alloc			= scsih_target_alloc,
+	.slave_alloc			= scsih_slave_alloc,
+	.slave_configure		= scsih_slave_configure,
+	.target_destroy			= scsih_target_destroy,
+	.slave_destroy			= scsih_slave_destroy,
+	.scan_finished			= scsih_scan_finished,
+	.scan_start			= scsih_scan_start,
+	.change_queue_depth		= scsih_change_queue_depth,
+	.eh_abort_handler		= scsih_abort,
+	.eh_device_reset_handler	= scsih_dev_reset,
+	.eh_target_reset_handler	= scsih_target_reset,
+	.eh_host_reset_handler		= scsih_host_reset,
+	.bios_param			= scsih_bios_param,
+	.can_queue			= 1,
+	.this_id			= -1,
+	.sg_tablesize			= MPT2SAS_SG_DEPTH,
+	.max_sectors			= 32767,
+	.cmd_per_lun			= 7,
+	.shost_groups			= mpt3sas_host_groups,
+	.sdev_groups			= mpt3sas_dev_groups,
+	.track_queue_depth		= 1,
+	.cmd_size			= sizeof(struct scsiio_tracker),
+};
+
+/* raid transport support for SAS 2.0 HBA devices */
+static struct raid_function_template mpt2sas_raid_functions = {
+	.cookie		= &mpt2sas_driver_template,
+	.is_raid	= scsih_is_raid,
+	.get_resync	= scsih_get_resync,
+	.get_state	= scsih_get_state,
+};
+
+/* shost template for SAS 3.0 HBA devices */
+static const struct scsi_host_template mpt3sas_driver_template = {
+	.module				= THIS_MODULE,
+	.name				= "Fusion MPT SAS Host",
+	.proc_name			= MPT3SAS_DRIVER_NAME,
+	.queuecommand			= scsih_qcmd,
+	.target_alloc			= scsih_target_alloc,
+	.slave_alloc			= scsih_slave_alloc,
+	.slave_configure		= scsih_slave_configure,
+	.target_destroy			= scsih_target_destroy,
+	.slave_destroy			= scsih_slave_destroy,
+	.scan_finished			= scsih_scan_finished,
+	.scan_start			= scsih_scan_start,
+	.change_queue_depth		= scsih_change_queue_depth,
+	.eh_abort_handler		= scsih_abort,
+	.eh_device_reset_handler	= scsih_dev_reset,
+	.eh_target_reset_handler	= scsih_target_reset,
+	.eh_host_reset_handler		= scsih_host_reset,
+	.bios_param			= scsih_bios_param,
+	.can_queue			= 1,
+	.this_id			= -1,
+	.sg_tablesize			= MPT3SAS_SG_DEPTH,
+	.max_sectors			= 32767,
+	.max_segment_size		= 0xffffffff,
+	.cmd_per_lun			= 128,
+	.shost_groups			= mpt3sas_host_groups,
+	.sdev_groups			= mpt3sas_dev_groups,
+	.track_queue_depth		= 1,
+	.cmd_size			= sizeof(struct scsiio_tracker),
+	.map_queues			= scsih_map_queues,
+	.mq_poll			= mpt3sas_blk_mq_poll,
+};
+
+/* raid transport support for SAS 3.0 HBA devices */
+static struct raid_function_template mpt3sas_raid_functions = {
+	.cookie		= &mpt3sas_driver_template,
+	.is_raid	= scsih_is_raid,
+	.get_resync	= scsih_get_resync,
+	.get_state	= scsih_get_state,
+};
+
+/**
+ * _scsih_determine_hba_mpi_version - determine in which MPI version class
+ *					this device belongs to.
+ * @pdev: PCI device struct
+ *
+ * return MPI2_VERSION for SAS 2.0 HBA devices,
+ *	MPI25_VERSION for SAS 3.0 HBA devices, and
+ *	MPI26 VERSION for Cutlass & Invader SAS 3.0 HBA devices
+ */
+static u16
+_scsih_determine_hba_mpi_version(struct pci_dev *pdev)
+{
+
+	switch (pdev->device) {
+	case MPI2_MFGPAGE_DEVID_SSS6200:
+	case MPI2_MFGPAGE_DEVID_SAS2004:
+	case MPI2_MFGPAGE_DEVID_SAS2008:
+	case MPI2_MFGPAGE_DEVID_SAS2108_1:
+	case MPI2_MFGPAGE_DEVID_SAS2108_2:
+	case MPI2_MFGPAGE_DEVID_SAS2108_3:
+	case MPI2_MFGPAGE_DEVID_SAS2116_1:
+	case MPI2_MFGPAGE_DEVID_SAS2116_2:
+	case MPI2_MFGPAGE_DEVID_SAS2208_1:
+	case MPI2_MFGPAGE_DEVID_SAS2208_2:
+	case MPI2_MFGPAGE_DEVID_SAS2208_3:
+	case MPI2_MFGPAGE_DEVID_SAS2208_4:
+	case MPI2_MFGPAGE_DEVID_SAS2208_5:
+	case MPI2_MFGPAGE_DEVID_SAS2208_6:
+	case MPI2_MFGPAGE_DEVID_SAS2308_1:
+	case MPI2_MFGPAGE_DEVID_SAS2308_2:
+	case MPI2_MFGPAGE_DEVID_SAS2308_3:
+	case MPI2_MFGPAGE_DEVID_SWITCH_MPI_EP:
+	case MPI2_MFGPAGE_DEVID_SWITCH_MPI_EP_1:
+		return MPI2_VERSION;
+	case MPI25_MFGPAGE_DEVID_SAS3004:
+	case MPI25_MFGPAGE_DEVID_SAS3008:
+	case MPI25_MFGPAGE_DEVID_SAS3108_1:
+	case MPI25_MFGPAGE_DEVID_SAS3108_2:
+	case MPI25_MFGPAGE_DEVID_SAS3108_5:
+	case MPI25_MFGPAGE_DEVID_SAS3108_6:
+		return MPI25_VERSION;
+	case MPI26_MFGPAGE_DEVID_SAS3216:
+	case MPI26_MFGPAGE_DEVID_SAS3224:
+	case MPI26_MFGPAGE_DEVID_SAS3316_1:
+	case MPI26_MFGPAGE_DEVID_SAS3316_2:
+	case MPI26_MFGPAGE_DEVID_SAS3316_3:
+	case MPI26_MFGPAGE_DEVID_SAS3316_4:
+	case MPI26_MFGPAGE_DEVID_SAS3324_1:
+	case MPI26_MFGPAGE_DEVID_SAS3324_2:
+	case MPI26_MFGPAGE_DEVID_SAS3324_3:
+	case MPI26_MFGPAGE_DEVID_SAS3324_4:
+	case MPI26_MFGPAGE_DEVID_SAS3508:
+	case MPI26_MFGPAGE_DEVID_SAS3508_1:
+	case MPI26_MFGPAGE_DEVID_SAS3408:
+	case MPI26_MFGPAGE_DEVID_SAS3516:
+	case MPI26_MFGPAGE_DEVID_SAS3516_1:
+	case MPI26_MFGPAGE_DEVID_SAS3416:
+	case MPI26_MFGPAGE_DEVID_SAS3616:
+	case MPI26_ATLAS_PCIe_SWITCH_DEVID:
+	case MPI26_MFGPAGE_DEVID_CFG_SEC_3916:
+	case MPI26_MFGPAGE_DEVID_HARD_SEC_3916:
+	case MPI26_MFGPAGE_DEVID_CFG_SEC_3816:
+	case MPI26_MFGPAGE_DEVID_HARD_SEC_3816:
+	case MPI26_MFGPAGE_DEVID_INVALID0_3916:
+	case MPI26_MFGPAGE_DEVID_INVALID1_3916:
+	case MPI26_MFGPAGE_DEVID_INVALID0_3816:
+	case MPI26_MFGPAGE_DEVID_INVALID1_3816:
+		return MPI26_VERSION;
+	}
+	return 0;
+}
+
+/**
+ * _scsih_probe - attach and add scsi host
+ * @pdev: PCI device struct
+ * @id: pci device id
+ *
+ * Return: 0 success, anything else error.
+ */
+static int
+_scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct MPT3SAS_ADAPTER *ioc;
+	struct Scsi_Host *shost = NULL;
+	int rv;
+	u16 hba_mpi_version;
+	int iopoll_q_count = 0;
+
+	/* Determine in which MPI version class this pci device belongs */
+	hba_mpi_version = _scsih_determine_hba_mpi_version(pdev);
+	if (hba_mpi_version == 0)
+		return -ENODEV;
+
+	/* Enumerate only SAS 2.0 HBA's if hbas_to_enumerate is one,
+	 * for other generation HBA's return with -ENODEV
+	 */
+	if ((hbas_to_enumerate == 1) && (hba_mpi_version !=  MPI2_VERSION))
+		return -ENODEV;
+
+	/* Enumerate only SAS 3.0 HBA's if hbas_to_enumerate is two,
+	 * for other generation HBA's return with -ENODEV
+	 */
+	if ((hbas_to_enumerate == 2) && (!(hba_mpi_version ==  MPI25_VERSION
+		|| hba_mpi_version ==  MPI26_VERSION)))
+		return -ENODEV;
+
+	switch (hba_mpi_version) {
+	case MPI2_VERSION:
+		pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S |
+			PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM);
+		/* Use mpt2sas driver host template for SAS 2.0 HBA's */
+		shost = scsi_host_alloc(&mpt2sas_driver_template,
+		  sizeof(struct MPT3SAS_ADAPTER));
+		if (!shost)
+			return -ENODEV;
+		ioc = shost_priv(shost);
+		memset(ioc, 0, sizeof(struct MPT3SAS_ADAPTER));
+		ioc->hba_mpi_version_belonged = hba_mpi_version;
+		ioc->id = mpt2_ids++;
+		sprintf(ioc->driver_name, "%s", MPT2SAS_DRIVER_NAME);
+		switch (pdev->device) {
+		case MPI2_MFGPAGE_DEVID_SSS6200:
+			ioc->is_warpdrive = 1;
+			ioc->hide_ir_msg = 1;
+			break;
+		case MPI2_MFGPAGE_DEVID_SWITCH_MPI_EP:
+		case MPI2_MFGPAGE_DEVID_SWITCH_MPI_EP_1:
+			ioc->is_mcpu_endpoint = 1;
+			break;
+		default:
+			ioc->mfg_pg10_hide_flag = MFG_PAGE10_EXPOSE_ALL_DISKS;
+			break;
+		}
+
+		if (multipath_on_hba == -1 || multipath_on_hba == 0)
+			ioc->multipath_on_hba = 0;
+		else
+			ioc->multipath_on_hba = 1;
+
+		break;
+	case MPI25_VERSION:
+	case MPI26_VERSION:
+		/* Use mpt3sas driver host template for SAS 3.0 HBA's */
+		shost = scsi_host_alloc(&mpt3sas_driver_template,
+		  sizeof(struct MPT3SAS_ADAPTER));
+		if (!shost)
+			return -ENODEV;
+		ioc = shost_priv(shost);
+		memset(ioc, 0, sizeof(struct MPT3SAS_ADAPTER));
+		ioc->hba_mpi_version_belonged = hba_mpi_version;
+		ioc->id = mpt3_ids++;
+		sprintf(ioc->driver_name, "%s", MPT3SAS_DRIVER_NAME);
+		switch (pdev->device) {
+		case MPI26_MFGPAGE_DEVID_SAS3508:
+		case MPI26_MFGPAGE_DEVID_SAS3508_1:
+		case MPI26_MFGPAGE_DEVID_SAS3408:
+		case MPI26_MFGPAGE_DEVID_SAS3516:
+		case MPI26_MFGPAGE_DEVID_SAS3516_1:
+		case MPI26_MFGPAGE_DEVID_SAS3416:
+		case MPI26_MFGPAGE_DEVID_SAS3616:
+		case MPI26_ATLAS_PCIe_SWITCH_DEVID:
+			ioc->is_gen35_ioc = 1;
+			break;
+		case MPI26_MFGPAGE_DEVID_INVALID0_3816:
+		case MPI26_MFGPAGE_DEVID_INVALID0_3916:
+			dev_err(&pdev->dev,
+			    "HBA with DeviceId 0x%04x, sub VendorId 0x%04x, sub DeviceId 0x%04x is Invalid",
+			    pdev->device, pdev->subsystem_vendor,
+			    pdev->subsystem_device);
+			return 1;
+		case MPI26_MFGPAGE_DEVID_INVALID1_3816:
+		case MPI26_MFGPAGE_DEVID_INVALID1_3916:
+			dev_err(&pdev->dev,
+			    "HBA with DeviceId 0x%04x, sub VendorId 0x%04x, sub DeviceId 0x%04x is Tampered",
+			    pdev->device, pdev->subsystem_vendor,
+			    pdev->subsystem_device);
+			return 1;
+		case MPI26_MFGPAGE_DEVID_CFG_SEC_3816:
+		case MPI26_MFGPAGE_DEVID_CFG_SEC_3916:
+			dev_info(&pdev->dev,
+			    "HBA is in Configurable Secure mode\n");
+			fallthrough;
+		case MPI26_MFGPAGE_DEVID_HARD_SEC_3816:
+		case MPI26_MFGPAGE_DEVID_HARD_SEC_3916:
+			ioc->is_aero_ioc = ioc->is_gen35_ioc = 1;
+			break;
+		default:
+			ioc->is_gen35_ioc = ioc->is_aero_ioc = 0;
+		}
+		if ((ioc->hba_mpi_version_belonged == MPI25_VERSION &&
+			pdev->revision >= SAS3_PCI_DEVICE_C0_REVISION) ||
+			(ioc->hba_mpi_version_belonged == MPI26_VERSION)) {
+			ioc->combined_reply_queue = 1;
+			if (ioc->is_gen35_ioc)
+				ioc->combined_reply_index_count =
+				 MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT_G35;
+			else
+				ioc->combined_reply_index_count =
+				 MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT_G3;
+		}
+
+		switch (ioc->is_gen35_ioc) {
+		case 0:
+			if (multipath_on_hba == -1 || multipath_on_hba == 0)
+				ioc->multipath_on_hba = 0;
+			else
+				ioc->multipath_on_hba = 1;
+			break;
+		case 1:
+			if (multipath_on_hba == -1 || multipath_on_hba > 0)
+				ioc->multipath_on_hba = 1;
+			else
+				ioc->multipath_on_hba = 0;
+			break;
+		default:
+			break;
+		}
+
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	INIT_LIST_HEAD(&ioc->list);
+	spin_lock(&gioc_lock);
+	list_add_tail(&ioc->list, &mpt3sas_ioc_list);
+	spin_unlock(&gioc_lock);
+	ioc->shost = shost;
+	ioc->pdev = pdev;
+	ioc->scsi_io_cb_idx = scsi_io_cb_idx;
+	ioc->tm_cb_idx = tm_cb_idx;
+	ioc->ctl_cb_idx = ctl_cb_idx;
+	ioc->base_cb_idx = base_cb_idx;
+	ioc->port_enable_cb_idx = port_enable_cb_idx;
+	ioc->transport_cb_idx = transport_cb_idx;
+	ioc->scsih_cb_idx = scsih_cb_idx;
+	ioc->config_cb_idx = config_cb_idx;
+	ioc->tm_tr_cb_idx = tm_tr_cb_idx;
+	ioc->tm_tr_volume_cb_idx = tm_tr_volume_cb_idx;
+	ioc->tm_sas_control_cb_idx = tm_sas_control_cb_idx;
+	ioc->logging_level = logging_level;
+	ioc->schedule_dead_ioc_flush_running_cmds = &_scsih_flush_running_cmds;
+	/* Host waits for minimum of six seconds */
+	ioc->max_shutdown_latency = IO_UNIT_CONTROL_SHUTDOWN_TIMEOUT;
+	/*
+	 * Enable MEMORY MOVE support flag.
+	 */
+	ioc->drv_support_bitmap |= MPT_DRV_SUPPORT_BITMAP_MEMMOVE;
+	/* Enable ADDITIONAL QUERY support flag. */
+	ioc->drv_support_bitmap |= MPT_DRV_SUPPORT_BITMAP_ADDNLQUERY;
+
+	ioc->enable_sdev_max_qd = enable_sdev_max_qd;
+
+	/* misc semaphores and spin locks */
+	mutex_init(&ioc->reset_in_progress_mutex);
+	/* initializing pci_access_mutex lock */
+	mutex_init(&ioc->pci_access_mutex);
+	spin_lock_init(&ioc->ioc_reset_in_progress_lock);
+	spin_lock_init(&ioc->scsi_lookup_lock);
+	spin_lock_init(&ioc->sas_device_lock);
+	spin_lock_init(&ioc->sas_node_lock);
+	spin_lock_init(&ioc->fw_event_lock);
+	spin_lock_init(&ioc->raid_device_lock);
+	spin_lock_init(&ioc->pcie_device_lock);
+	spin_lock_init(&ioc->diag_trigger_lock);
+
+	INIT_LIST_HEAD(&ioc->sas_device_list);
+	INIT_LIST_HEAD(&ioc->sas_device_init_list);
+	INIT_LIST_HEAD(&ioc->sas_expander_list);
+	INIT_LIST_HEAD(&ioc->enclosure_list);
+	INIT_LIST_HEAD(&ioc->pcie_device_list);
+	INIT_LIST_HEAD(&ioc->pcie_device_init_list);
+	INIT_LIST_HEAD(&ioc->fw_event_list);
+	INIT_LIST_HEAD(&ioc->raid_device_list);
+	INIT_LIST_HEAD(&ioc->sas_hba.sas_port_list);
+	INIT_LIST_HEAD(&ioc->delayed_tr_list);
+	INIT_LIST_HEAD(&ioc->delayed_sc_list);
+	INIT_LIST_HEAD(&ioc->delayed_event_ack_list);
+	INIT_LIST_HEAD(&ioc->delayed_tr_volume_list);
+	INIT_LIST_HEAD(&ioc->reply_queue_list);
+	INIT_LIST_HEAD(&ioc->port_table_list);
+
+	sprintf(ioc->name, "%s_cm%d", ioc->driver_name, ioc->id);
+
+	/* init shost parameters */
+	shost->max_cmd_len = 32;
+	shost->max_lun = max_lun;
+	shost->transportt = mpt3sas_transport_template;
+	shost->unique_id = ioc->id;
+
+	if (ioc->is_mcpu_endpoint) {
+		/* mCPU MPI support 64K max IO */
+		shost->max_sectors = 128;
+		ioc_info(ioc, "The max_sectors value is set to %d\n",
+			 shost->max_sectors);
+	} else {
+		if (max_sectors != 0xFFFF) {
+			if (max_sectors < 64) {
+				shost->max_sectors = 64;
+				ioc_warn(ioc, "Invalid value %d passed for max_sectors, range is 64 to 32767. Assigning value of 64.\n",
+					 max_sectors);
+			} else if (max_sectors > 32767) {
+				shost->max_sectors = 32767;
+				ioc_warn(ioc, "Invalid value %d passed for max_sectors, range is 64 to 32767.Assigning default value of 32767.\n",
+					 max_sectors);
+			} else {
+				shost->max_sectors = max_sectors & 0xFFFE;
+				ioc_info(ioc, "The max_sectors value is set to %d\n",
+					 shost->max_sectors);
+			}
+		}
+	}
+	/* register EEDP capabilities with SCSI layer */
+	if (prot_mask >= 0)
+		scsi_host_set_prot(shost, (prot_mask & 0x07));
+	else
+		scsi_host_set_prot(shost, SHOST_DIF_TYPE1_PROTECTION
+				   | SHOST_DIF_TYPE2_PROTECTION
+				   | SHOST_DIF_TYPE3_PROTECTION);
+
+	scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC);
+
+	/* event thread */
+	snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name),
+	    "fw_event_%s%d", ioc->driver_name, ioc->id);
+	ioc->firmware_event_thread = alloc_ordered_workqueue(
+	    ioc->firmware_event_name, 0);
+	if (!ioc->firmware_event_thread) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		rv = -ENODEV;
+		goto out_thread_fail;
+	}
+
+	shost->host_tagset = 0;
+
+	if (ioc->is_gen35_ioc && host_tagset_enable)
+		shost->host_tagset = 1;
+
+	ioc->is_driver_loading = 1;
+	if ((mpt3sas_base_attach(ioc))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		rv = -ENODEV;
+		goto out_attach_fail;
+	}
+
+	if (ioc->is_warpdrive) {
+		if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_EXPOSE_ALL_DISKS)
+			ioc->hide_drives = 0;
+		else if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_HIDE_ALL_DISKS)
+			ioc->hide_drives = 1;
+		else {
+			if (mpt3sas_get_num_volumes(ioc))
+				ioc->hide_drives = 1;
+			else
+				ioc->hide_drives = 0;
+		}
+	} else
+		ioc->hide_drives = 0;
+
+	shost->nr_hw_queues = 1;
+
+	if (shost->host_tagset) {
+		shost->nr_hw_queues =
+		    ioc->reply_queue_count - ioc->high_iops_queues;
+
+		iopoll_q_count =
+		    ioc->reply_queue_count - ioc->iopoll_q_start_index;
+
+		shost->nr_maps = iopoll_q_count ? 3 : 1;
+
+		dev_info(&ioc->pdev->dev,
+		    "Max SCSIIO MPT commands: %d shared with nr_hw_queues = %d\n",
+		    shost->can_queue, shost->nr_hw_queues);
+	}
+
+	rv = scsi_add_host(shost, &pdev->dev);
+	if (rv) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		goto out_add_shost_fail;
+	}
+
+	scsi_scan_host(shost);
+	mpt3sas_setup_debugfs(ioc);
+	return 0;
+out_add_shost_fail:
+	mpt3sas_base_detach(ioc);
+ out_attach_fail:
+	destroy_workqueue(ioc->firmware_event_thread);
+ out_thread_fail:
+	spin_lock(&gioc_lock);
+	list_del(&ioc->list);
+	spin_unlock(&gioc_lock);
+	scsi_host_put(shost);
+	return rv;
+}
+
+/**
+ * scsih_suspend - power management suspend main entry point
+ * @dev: Device struct
+ *
+ * Return: 0 success, anything else error.
+ */
+static int __maybe_unused
+scsih_suspend(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct Scsi_Host *shost;
+	struct MPT3SAS_ADAPTER *ioc;
+	int rc;
+
+	rc = _scsih_get_shost_and_ioc(pdev, &shost, &ioc);
+	if (rc)
+		return rc;
+
+	mpt3sas_base_stop_watchdog(ioc);
+	scsi_block_requests(shost);
+	_scsih_nvme_shutdown(ioc);
+	ioc_info(ioc, "pdev=0x%p, slot=%s, entering operating state\n",
+		 pdev, pci_name(pdev));
+
+	mpt3sas_base_free_resources(ioc);
+	return 0;
+}
+
+/**
+ * scsih_resume - power management resume main entry point
+ * @dev: Device struct
+ *
+ * Return: 0 success, anything else error.
+ */
+static int __maybe_unused
+scsih_resume(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct Scsi_Host *shost;
+	struct MPT3SAS_ADAPTER *ioc;
+	pci_power_t device_state = pdev->current_state;
+	int r;
+
+	r = _scsih_get_shost_and_ioc(pdev, &shost, &ioc);
+	if (r)
+		return r;
+
+	ioc_info(ioc, "pdev=0x%p, slot=%s, previous operating state [D%d]\n",
+		 pdev, pci_name(pdev), device_state);
+
+	ioc->pdev = pdev;
+	r = mpt3sas_base_map_resources(ioc);
+	if (r)
+		return r;
+	ioc_info(ioc, "Issuing Hard Reset as part of OS Resume\n");
+	mpt3sas_base_hard_reset_handler(ioc, SOFT_RESET);
+	scsi_unblock_requests(shost);
+	mpt3sas_base_start_watchdog(ioc);
+	return 0;
+}
+
+/**
+ * scsih_pci_error_detected - Called when a PCI error is detected.
+ * @pdev: PCI device struct
+ * @state: PCI channel state
+ *
+ * Description: Called when a PCI error is detected.
+ *
+ * Return: PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT.
+ */
+static pci_ers_result_t
+scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+	struct Scsi_Host *shost;
+	struct MPT3SAS_ADAPTER *ioc;
+
+	if (_scsih_get_shost_and_ioc(pdev, &shost, &ioc))
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	ioc_info(ioc, "PCI error: detected callback, state(%d)!!\n", state);
+
+	switch (state) {
+	case pci_channel_io_normal:
+		return PCI_ERS_RESULT_CAN_RECOVER;
+	case pci_channel_io_frozen:
+		/* Fatal error, prepare for slot reset */
+		ioc->pci_error_recovery = 1;
+		scsi_block_requests(ioc->shost);
+		mpt3sas_base_stop_watchdog(ioc);
+		mpt3sas_base_free_resources(ioc);
+		return PCI_ERS_RESULT_NEED_RESET;
+	case pci_channel_io_perm_failure:
+		/* Permanent error, prepare for device removal */
+		ioc->pci_error_recovery = 1;
+		mpt3sas_base_stop_watchdog(ioc);
+		mpt3sas_base_pause_mq_polling(ioc);
+		_scsih_flush_running_cmds(ioc);
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * scsih_pci_slot_reset - Called when PCI slot has been reset.
+ * @pdev: PCI device struct
+ *
+ * Description: This routine is called by the pci error recovery
+ * code after the PCI slot has been reset, just before we
+ * should resume normal operations.
+ */
+static pci_ers_result_t
+scsih_pci_slot_reset(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost;
+	struct MPT3SAS_ADAPTER *ioc;
+	int rc;
+
+	if (_scsih_get_shost_and_ioc(pdev, &shost, &ioc))
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	ioc_info(ioc, "PCI error: slot reset callback!!\n");
+
+	ioc->pci_error_recovery = 0;
+	ioc->pdev = pdev;
+	pci_restore_state(pdev);
+	rc = mpt3sas_base_map_resources(ioc);
+	if (rc)
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	ioc_info(ioc, "Issuing Hard Reset as part of PCI Slot Reset\n");
+	rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+
+	ioc_warn(ioc, "hard reset: %s\n",
+		 (rc == 0) ? "success" : "failed");
+
+	if (!rc)
+		return PCI_ERS_RESULT_RECOVERED;
+	else
+		return PCI_ERS_RESULT_DISCONNECT;
+}
+
+/**
+ * scsih_pci_resume() - resume normal ops after PCI reset
+ * @pdev: pointer to PCI device
+ *
+ * Called when the error recovery driver tells us that its
+ * OK to resume normal operation. Use completion to allow
+ * halted scsi ops to resume.
+ */
+static void
+scsih_pci_resume(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost;
+	struct MPT3SAS_ADAPTER *ioc;
+
+	if (_scsih_get_shost_and_ioc(pdev, &shost, &ioc))
+		return;
+
+	ioc_info(ioc, "PCI error: resume callback!!\n");
+
+	mpt3sas_base_start_watchdog(ioc);
+	scsi_unblock_requests(ioc->shost);
+}
+
+/**
+ * scsih_pci_mmio_enabled - Enable MMIO and dump debug registers
+ * @pdev: pointer to PCI device
+ */
+static pci_ers_result_t
+scsih_pci_mmio_enabled(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost;
+	struct MPT3SAS_ADAPTER *ioc;
+
+	if (_scsih_get_shost_and_ioc(pdev, &shost, &ioc))
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	ioc_info(ioc, "PCI error: mmio enabled callback!!\n");
+
+	/* TODO - dump whatever for debugging purposes */
+
+	/* This called only if scsih_pci_error_detected returns
+	 * PCI_ERS_RESULT_CAN_RECOVER. Read/write to the device still
+	 * works, no need to reset slot.
+	 */
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * scsih_ncq_prio_supp - Check for NCQ command priority support
+ * @sdev: scsi device struct
+ *
+ * This is called when a user indicates they would like to enable
+ * ncq command priorities. This works only on SATA devices.
+ */
+bool scsih_ncq_prio_supp(struct scsi_device *sdev)
+{
+	struct scsi_vpd *vpd;
+	bool ncq_prio_supp = false;
+
+	rcu_read_lock();
+	vpd = rcu_dereference(sdev->vpd_pg89);
+	if (!vpd || vpd->len < 214)
+		goto out;
+
+	ncq_prio_supp = (vpd->data[213] >> 4) & 1;
+out:
+	rcu_read_unlock();
+
+	return ncq_prio_supp;
+}
+/*
+ * The pci device ids are defined in mpi/mpi2_cnfg.h.
+ */
+static const struct pci_device_id mpt3sas_pci_table[] = {
+	/* Spitfire ~ 2004 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2004,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Falcon ~ 2008 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2008,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Liberator ~ 2108 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_2,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_3,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Meteor ~ 2116 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_2,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Thunderbolt ~ 2208 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_2,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_3,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_4,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_5,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_6,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Mustang ~ 2308 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_2,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_3,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SWITCH_MPI_EP,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SWITCH_MPI_EP_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* SSS6200 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SSS6200,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Fury ~ 3004 and 3008 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3004,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3008,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Invader ~ 3108 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_2,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_5,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_6,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Cutlass ~ 3216 and 3224 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3216,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3224,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Intruder ~ 3316 and 3324 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3316_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3316_2,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3316_3,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3316_4,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3324_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3324_2,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3324_3,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3324_4,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Ventura, Crusader, Harpoon & Tomcat ~ 3516, 3416, 3508 & 3408*/
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3508,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3508_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3408,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3516,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3516_1,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3416,
+		PCI_ANY_ID, PCI_ANY_ID },
+	/* Mercator ~ 3616*/
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3616,
+		PCI_ANY_ID, PCI_ANY_ID },
+
+	/* Aero SI 0x00E1 Configurable Secure
+	 * 0x00E2 Hard Secure
+	 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_CFG_SEC_3916,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_HARD_SEC_3916,
+		PCI_ANY_ID, PCI_ANY_ID },
+
+	/*
+	 *  Aero SI –> 0x00E0 Invalid, 0x00E3 Tampered
+	 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_INVALID0_3916,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_INVALID1_3916,
+		PCI_ANY_ID, PCI_ANY_ID },
+
+	/* Atlas PCIe Switch Management Port */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_ATLAS_PCIe_SWITCH_DEVID,
+		PCI_ANY_ID, PCI_ANY_ID },
+
+	/* Sea SI 0x00E5 Configurable Secure
+	 * 0x00E6 Hard Secure
+	 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_CFG_SEC_3816,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_HARD_SEC_3816,
+		PCI_ANY_ID, PCI_ANY_ID },
+
+	/*
+	 * ATTO Branded ExpressSAS H12xx GT
+	 */
+	{ MPI2_MFGPAGE_VENDORID_ATTO, MPI26_MFGPAGE_DEVID_HARD_SEC_3816,
+		PCI_ANY_ID, PCI_ANY_ID },
+
+	/*
+	 *  Sea SI –> 0x00E4 Invalid, 0x00E7 Tampered
+	 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_INVALID0_3816,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_INVALID1_3816,
+		PCI_ANY_ID, PCI_ANY_ID },
+
+	{0}     /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(pci, mpt3sas_pci_table);
+
+static struct pci_error_handlers _mpt3sas_err_handler = {
+	.error_detected	= scsih_pci_error_detected,
+	.mmio_enabled	= scsih_pci_mmio_enabled,
+	.slot_reset	= scsih_pci_slot_reset,
+	.resume		= scsih_pci_resume,
+};
+
+static SIMPLE_DEV_PM_OPS(scsih_pm_ops, scsih_suspend, scsih_resume);
+
+static struct pci_driver mpt3sas_driver = {
+	.name		= MPT3SAS_DRIVER_NAME,
+	.id_table	= mpt3sas_pci_table,
+	.probe		= _scsih_probe,
+	.remove		= scsih_remove,
+	.shutdown	= scsih_shutdown,
+	.err_handler	= &_mpt3sas_err_handler,
+	.driver.pm	= &scsih_pm_ops,
+};
+
+/**
+ * scsih_init - main entry point for this driver.
+ *
+ * Return: 0 success, anything else error.
+ */
+static int
+scsih_init(void)
+{
+	mpt2_ids = 0;
+	mpt3_ids = 0;
+
+	mpt3sas_base_initialize_callback_handler();
+
+	 /* queuecommand callback hander */
+	scsi_io_cb_idx = mpt3sas_base_register_callback_handler(_scsih_io_done);
+
+	/* task management callback handler */
+	tm_cb_idx = mpt3sas_base_register_callback_handler(_scsih_tm_done);
+
+	/* base internal commands callback handler */
+	base_cb_idx = mpt3sas_base_register_callback_handler(mpt3sas_base_done);
+	port_enable_cb_idx = mpt3sas_base_register_callback_handler(
+	    mpt3sas_port_enable_done);
+
+	/* transport internal commands callback handler */
+	transport_cb_idx = mpt3sas_base_register_callback_handler(
+	    mpt3sas_transport_done);
+
+	/* scsih internal commands callback handler */
+	scsih_cb_idx = mpt3sas_base_register_callback_handler(_scsih_done);
+
+	/* configuration page API internal commands callback handler */
+	config_cb_idx = mpt3sas_base_register_callback_handler(
+	    mpt3sas_config_done);
+
+	/* ctl module callback handler */
+	ctl_cb_idx = mpt3sas_base_register_callback_handler(mpt3sas_ctl_done);
+
+	tm_tr_cb_idx = mpt3sas_base_register_callback_handler(
+	    _scsih_tm_tr_complete);
+
+	tm_tr_volume_cb_idx = mpt3sas_base_register_callback_handler(
+	    _scsih_tm_volume_tr_complete);
+
+	tm_sas_control_cb_idx = mpt3sas_base_register_callback_handler(
+	    _scsih_sas_control_complete);
+
+	mpt3sas_init_debugfs();
+	return 0;
+}
+
+/**
+ * scsih_exit - exit point for this driver (when it is a module).
+ *
+ * Return: 0 success, anything else error.
+ */
+static void
+scsih_exit(void)
+{
+
+	mpt3sas_base_release_callback_handler(scsi_io_cb_idx);
+	mpt3sas_base_release_callback_handler(tm_cb_idx);
+	mpt3sas_base_release_callback_handler(base_cb_idx);
+	mpt3sas_base_release_callback_handler(port_enable_cb_idx);
+	mpt3sas_base_release_callback_handler(transport_cb_idx);
+	mpt3sas_base_release_callback_handler(scsih_cb_idx);
+	mpt3sas_base_release_callback_handler(config_cb_idx);
+	mpt3sas_base_release_callback_handler(ctl_cb_idx);
+
+	mpt3sas_base_release_callback_handler(tm_tr_cb_idx);
+	mpt3sas_base_release_callback_handler(tm_tr_volume_cb_idx);
+	mpt3sas_base_release_callback_handler(tm_sas_control_cb_idx);
+
+/* raid transport support */
+	if (hbas_to_enumerate != 1)
+		raid_class_release(mpt3sas_raid_template);
+	if (hbas_to_enumerate != 2)
+		raid_class_release(mpt2sas_raid_template);
+	sas_release_transport(mpt3sas_transport_template);
+	mpt3sas_exit_debugfs();
+}
+
+/**
+ * _mpt3sas_init - main entry point for this driver.
+ *
+ * Return: 0 success, anything else error.
+ */
+static int __init
+_mpt3sas_init(void)
+{
+	int error;
+
+	pr_info("%s version %s loaded\n", MPT3SAS_DRIVER_NAME,
+					MPT3SAS_DRIVER_VERSION);
+
+	mpt3sas_transport_template =
+	    sas_attach_transport(&mpt3sas_transport_functions);
+	if (!mpt3sas_transport_template)
+		return -ENODEV;
+
+	/* No need attach mpt3sas raid functions template
+	 * if hbas_to_enumarate value is one.
+	 */
+	if (hbas_to_enumerate != 1) {
+		mpt3sas_raid_template =
+				raid_class_attach(&mpt3sas_raid_functions);
+		if (!mpt3sas_raid_template) {
+			sas_release_transport(mpt3sas_transport_template);
+			return -ENODEV;
+		}
+	}
+
+	/* No need to attach mpt2sas raid functions template
+	 * if hbas_to_enumarate value is two
+	 */
+	if (hbas_to_enumerate != 2) {
+		mpt2sas_raid_template =
+				raid_class_attach(&mpt2sas_raid_functions);
+		if (!mpt2sas_raid_template) {
+			sas_release_transport(mpt3sas_transport_template);
+			return -ENODEV;
+		}
+	}
+
+	error = scsih_init();
+	if (error) {
+		scsih_exit();
+		return error;
+	}
+
+	mpt3sas_ctl_init(hbas_to_enumerate);
+
+	error = pci_register_driver(&mpt3sas_driver);
+	if (error) {
+		mpt3sas_ctl_exit(hbas_to_enumerate);
+		scsih_exit();
+	}
+
+	return error;
+}
+
+/**
+ * _mpt3sas_exit - exit point for this driver (when it is a module).
+ *
+ */
+static void __exit
+_mpt3sas_exit(void)
+{
+	pr_info("mpt3sas version %s unloading\n",
+				MPT3SAS_DRIVER_VERSION);
+
+	pci_unregister_driver(&mpt3sas_driver);
+
+	mpt3sas_ctl_exit(hbas_to_enumerate);
+
+	scsih_exit();
+}
+
+module_init(_mpt3sas_init);
+module_exit(_mpt3sas_exit);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c
new file mode 100644
index 0000000000..e8a4750f6e
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c
@@ -0,0 +1,2200 @@
+/*
+ * SAS Transport Layer for MPT (Message Passing Technology) based controllers
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_transport.c
+ * Copyright (C) 2012-2014  LSI Corporation
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport_sas.h>
+#include <scsi/scsi_dbg.h>
+
+#include "mpt3sas_base.h"
+
+/**
+ * _transport_get_port_id_by_sas_phy - get zone's port id that Phy belong to
+ * @phy: sas_phy object
+ *
+ * Return Port number
+ */
+static inline u8
+_transport_get_port_id_by_sas_phy(struct sas_phy *phy)
+{
+	u8 port_id = 0xFF;
+	struct hba_port *port = phy->hostdata;
+
+	if (port)
+		port_id = port->port_id;
+
+	return port_id;
+}
+
+/**
+ * _transport_sas_node_find_by_sas_address - sas node search
+ * @ioc: per adapter object
+ * @sas_address: sas address of expander or sas host
+ * @port: hba port entry
+ * Context: Calling function should acquire ioc->sas_node_lock.
+ *
+ * Search for either hba phys or expander device based on handle, then returns
+ * the sas_node object.
+ */
+static struct _sas_node *
+_transport_sas_node_find_by_sas_address(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address, struct hba_port *port)
+{
+	if (ioc->sas_hba.sas_address == sas_address)
+		return &ioc->sas_hba;
+	else
+		return mpt3sas_scsih_expander_find_by_sas_address(ioc,
+		    sas_address, port);
+}
+
+/**
+ * _transport_get_port_id_by_rphy - Get Port number from rphy object
+ * @ioc: per adapter object
+ * @rphy: sas_rphy object
+ *
+ * Returns Port number.
+ */
+static u8
+_transport_get_port_id_by_rphy(struct MPT3SAS_ADAPTER *ioc,
+	struct sas_rphy *rphy)
+{
+	struct _sas_node *sas_expander;
+	struct _sas_device *sas_device;
+	unsigned long flags;
+	u8 port_id = 0xFF;
+
+	if (!rphy)
+		return port_id;
+
+	if (rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE ||
+	    rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE) {
+		spin_lock_irqsave(&ioc->sas_node_lock, flags);
+		list_for_each_entry(sas_expander,
+		    &ioc->sas_expander_list, list) {
+			if (sas_expander->rphy == rphy) {
+				port_id = sas_expander->port->port_id;
+				break;
+			}
+		}
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+	} else if (rphy->identify.device_type == SAS_END_DEVICE) {
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		sas_device = __mpt3sas_get_sdev_by_rphy(ioc, rphy);
+		if (sas_device) {
+			port_id = sas_device->port->port_id;
+			sas_device_put(sas_device);
+		}
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	}
+
+	return port_id;
+}
+
+/**
+ * _transport_convert_phy_link_rate -
+ * @link_rate: link rate returned from mpt firmware
+ *
+ * Convert link_rate from mpi fusion into sas_transport form.
+ */
+static enum sas_linkrate
+_transport_convert_phy_link_rate(u8 link_rate)
+{
+	enum sas_linkrate rc;
+
+	switch (link_rate) {
+	case MPI2_SAS_NEG_LINK_RATE_1_5:
+		rc = SAS_LINK_RATE_1_5_GBPS;
+		break;
+	case MPI2_SAS_NEG_LINK_RATE_3_0:
+		rc = SAS_LINK_RATE_3_0_GBPS;
+		break;
+	case MPI2_SAS_NEG_LINK_RATE_6_0:
+		rc = SAS_LINK_RATE_6_0_GBPS;
+		break;
+	case MPI25_SAS_NEG_LINK_RATE_12_0:
+		rc = SAS_LINK_RATE_12_0_GBPS;
+		break;
+	case MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED:
+		rc = SAS_PHY_DISABLED;
+		break;
+	case MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED:
+		rc = SAS_LINK_RATE_FAILED;
+		break;
+	case MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR:
+		rc = SAS_SATA_PORT_SELECTOR;
+		break;
+	case MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS:
+		rc = SAS_PHY_RESET_IN_PROGRESS;
+		break;
+
+	default:
+	case MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE:
+	case MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE:
+		rc = SAS_LINK_RATE_UNKNOWN;
+		break;
+	}
+	return rc;
+}
+
+/**
+ * _transport_set_identify - set identify for phys and end devices
+ * @ioc: per adapter object
+ * @handle: device handle
+ * @identify: sas identify info
+ *
+ * Populates sas identify info.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_transport_set_identify(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	struct sas_identify *identify)
+{
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u32 device_info;
+	u32 ioc_status;
+
+	if (ioc->shost_recovery || ioc->pci_error_recovery) {
+		ioc_info(ioc, "%s: host reset in progress!\n", __func__);
+		return -EFAULT;
+	}
+
+	if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return -ENXIO;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		ioc_err(ioc, "handle(0x%04x), ioc_status(0x%04x) failure at %s:%d/%s()!\n",
+			handle, ioc_status, __FILE__, __LINE__, __func__);
+		return -EIO;
+	}
+
+	memset(identify, 0, sizeof(struct sas_identify));
+	device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
+
+	/* sas_address */
+	identify->sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+
+	/* phy number of the parent device this device is linked to */
+	identify->phy_identifier = sas_device_pg0.PhyNum;
+
+	/* device_type */
+	switch (device_info & MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE) {
+	case MPI2_SAS_DEVICE_INFO_NO_DEVICE:
+		identify->device_type = SAS_PHY_UNUSED;
+		break;
+	case MPI2_SAS_DEVICE_INFO_END_DEVICE:
+		identify->device_type = SAS_END_DEVICE;
+		break;
+	case MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER:
+		identify->device_type = SAS_EDGE_EXPANDER_DEVICE;
+		break;
+	case MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER:
+		identify->device_type = SAS_FANOUT_EXPANDER_DEVICE;
+		break;
+	}
+
+	/* initiator_port_protocols */
+	if (device_info & MPI2_SAS_DEVICE_INFO_SSP_INITIATOR)
+		identify->initiator_port_protocols |= SAS_PROTOCOL_SSP;
+	if (device_info & MPI2_SAS_DEVICE_INFO_STP_INITIATOR)
+		identify->initiator_port_protocols |= SAS_PROTOCOL_STP;
+	if (device_info & MPI2_SAS_DEVICE_INFO_SMP_INITIATOR)
+		identify->initiator_port_protocols |= SAS_PROTOCOL_SMP;
+	if (device_info & MPI2_SAS_DEVICE_INFO_SATA_HOST)
+		identify->initiator_port_protocols |= SAS_PROTOCOL_SATA;
+
+	/* target_port_protocols */
+	if (device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET)
+		identify->target_port_protocols |= SAS_PROTOCOL_SSP;
+	if (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET)
+		identify->target_port_protocols |= SAS_PROTOCOL_STP;
+	if (device_info & MPI2_SAS_DEVICE_INFO_SMP_TARGET)
+		identify->target_port_protocols |= SAS_PROTOCOL_SMP;
+	if (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
+		identify->target_port_protocols |= SAS_PROTOCOL_SATA;
+
+	return 0;
+}
+
+/**
+ * mpt3sas_transport_done -  internal transport layer callback handler.
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Callback handler when sending internal generated transport cmds.
+ * The callback index passed is `ioc->transport_cb_idx`
+ *
+ * Return: 1 meaning mf should be freed from _base_interrupt
+ *         0 means the mf is freed from this function.
+ */
+u8
+mpt3sas_transport_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply)
+{
+	MPI2DefaultReply_t *mpi_reply;
+
+	mpi_reply =  mpt3sas_base_get_reply_virt_addr(ioc, reply);
+	if (ioc->transport_cmds.status == MPT3_CMD_NOT_USED)
+		return 1;
+	if (ioc->transport_cmds.smid != smid)
+		return 1;
+	ioc->transport_cmds.status |= MPT3_CMD_COMPLETE;
+	if (mpi_reply) {
+		memcpy(ioc->transport_cmds.reply, mpi_reply,
+		    mpi_reply->MsgLength*4);
+		ioc->transport_cmds.status |= MPT3_CMD_REPLY_VALID;
+	}
+	ioc->transport_cmds.status &= ~MPT3_CMD_PENDING;
+	complete(&ioc->transport_cmds.done);
+	return 1;
+}
+
+/* report manufacture request structure */
+struct rep_manu_request {
+	u8 smp_frame_type;
+	u8 function;
+	u8 reserved;
+	u8 request_length;
+};
+
+/* report manufacture reply structure */
+struct rep_manu_reply {
+	u8 smp_frame_type; /* 0x41 */
+	u8 function; /* 0x01 */
+	u8 function_result;
+	u8 response_length;
+	u16 expander_change_count;
+	u8 reserved0[2];
+	u8 sas_format;
+	u8 reserved2[3];
+	u8 vendor_id[SAS_EXPANDER_VENDOR_ID_LEN];
+	u8 product_id[SAS_EXPANDER_PRODUCT_ID_LEN];
+	u8 product_rev[SAS_EXPANDER_PRODUCT_REV_LEN];
+	u8 component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN];
+	u16 component_id;
+	u8 component_revision_id;
+	u8 reserved3;
+	u8 vendor_specific[8];
+};
+
+/**
+ * _transport_expander_report_manufacture - obtain SMP report_manufacture
+ * @ioc: per adapter object
+ * @sas_address: expander sas address
+ * @edev: the sas_expander_device object
+ * @port_id: Port ID number
+ *
+ * Fills in the sas_expander_device object when SMP port is created.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_transport_expander_report_manufacture(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address, struct sas_expander_device *edev, u8 port_id)
+{
+	Mpi2SmpPassthroughRequest_t *mpi_request;
+	Mpi2SmpPassthroughReply_t *mpi_reply;
+	struct rep_manu_reply *manufacture_reply;
+	struct rep_manu_request *manufacture_request;
+	int rc;
+	u16 smid;
+	void *psge;
+	u8 issue_reset = 0;
+	void *data_out = NULL;
+	dma_addr_t data_out_dma;
+	dma_addr_t data_in_dma;
+	size_t data_in_sz;
+	size_t data_out_sz;
+
+	if (ioc->shost_recovery || ioc->pci_error_recovery) {
+		ioc_info(ioc, "%s: host reset in progress!\n", __func__);
+		return -EFAULT;
+	}
+
+	mutex_lock(&ioc->transport_cmds.mutex);
+
+	if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) {
+		ioc_err(ioc, "%s: transport_cmds in use\n", __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+	ioc->transport_cmds.status = MPT3_CMD_PENDING;
+
+	rc = mpt3sas_wait_for_ioc(ioc, IOC_OPERATIONAL_WAIT_COUNT);
+	if (rc)
+		goto out;
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx);
+	if (!smid) {
+		ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	rc = 0;
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->transport_cmds.smid = smid;
+
+	data_out_sz = sizeof(struct rep_manu_request);
+	data_in_sz = sizeof(struct rep_manu_reply);
+	data_out = dma_alloc_coherent(&ioc->pdev->dev, data_out_sz + data_in_sz,
+			&data_out_dma, GFP_KERNEL);
+	if (!data_out) {
+		pr_err("failure at %s:%d/%s()!\n", __FILE__,
+		    __LINE__, __func__);
+		rc = -ENOMEM;
+		mpt3sas_base_free_smid(ioc, smid);
+		goto out;
+	}
+
+	data_in_dma = data_out_dma + sizeof(struct rep_manu_request);
+
+	manufacture_request = data_out;
+	manufacture_request->smp_frame_type = 0x40;
+	manufacture_request->function = 1;
+	manufacture_request->reserved = 0;
+	manufacture_request->request_length = 0;
+
+	memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
+	mpi_request->PhysicalPort = port_id;
+	mpi_request->SASAddress = cpu_to_le64(sas_address);
+	mpi_request->RequestDataLength = cpu_to_le16(data_out_sz);
+	psge = &mpi_request->SGL;
+
+	ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma,
+	    data_in_sz);
+
+	dtransportprintk(ioc,
+			 ioc_info(ioc, "report_manufacture - send to sas_addr(0x%016llx)\n",
+				  (u64)sas_address));
+	init_completion(&ioc->transport_cmds.done);
+	ioc->put_smid_default(ioc, smid);
+	wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ);
+
+	if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) {
+		ioc_err(ioc, "%s: timeout\n", __func__);
+		_debug_dump_mf(mpi_request,
+		    sizeof(Mpi2SmpPassthroughRequest_t)/4);
+		if (!(ioc->transport_cmds.status & MPT3_CMD_RESET))
+			issue_reset = 1;
+		goto issue_host_reset;
+	}
+
+	dtransportprintk(ioc, ioc_info(ioc, "report_manufacture - complete\n"));
+
+	if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) {
+		u8 *tmp;
+
+		mpi_reply = ioc->transport_cmds.reply;
+
+		dtransportprintk(ioc,
+				 ioc_info(ioc, "report_manufacture - reply data transfer size(%d)\n",
+					  le16_to_cpu(mpi_reply->ResponseDataLength)));
+
+		if (le16_to_cpu(mpi_reply->ResponseDataLength) !=
+		    sizeof(struct rep_manu_reply))
+			goto out;
+
+		manufacture_reply = data_out + sizeof(struct rep_manu_request);
+		strncpy(edev->vendor_id, manufacture_reply->vendor_id,
+		     SAS_EXPANDER_VENDOR_ID_LEN);
+		strncpy(edev->product_id, manufacture_reply->product_id,
+		     SAS_EXPANDER_PRODUCT_ID_LEN);
+		strncpy(edev->product_rev, manufacture_reply->product_rev,
+		     SAS_EXPANDER_PRODUCT_REV_LEN);
+		edev->level = manufacture_reply->sas_format & 1;
+		if (edev->level) {
+			strncpy(edev->component_vendor_id,
+			    manufacture_reply->component_vendor_id,
+			     SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN);
+			tmp = (u8 *)&manufacture_reply->component_id;
+			edev->component_id = tmp[0] << 8 | tmp[1];
+			edev->component_revision_id =
+			    manufacture_reply->component_revision_id;
+		}
+	} else
+		dtransportprintk(ioc,
+				 ioc_info(ioc, "report_manufacture - no reply\n"));
+
+ issue_host_reset:
+	if (issue_reset)
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+ out:
+	ioc->transport_cmds.status = MPT3_CMD_NOT_USED;
+	if (data_out)
+		dma_free_coherent(&ioc->pdev->dev, data_out_sz + data_in_sz,
+		    data_out, data_out_dma);
+
+	mutex_unlock(&ioc->transport_cmds.mutex);
+	return rc;
+}
+
+
+/**
+ * _transport_delete_port - helper function to removing a port
+ * @ioc: per adapter object
+ * @mpt3sas_port: mpt3sas per port object
+ */
+static void
+_transport_delete_port(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_port *mpt3sas_port)
+{
+	u64 sas_address = mpt3sas_port->remote_identify.sas_address;
+	struct hba_port *port = mpt3sas_port->hba_port;
+	enum sas_device_type device_type =
+	    mpt3sas_port->remote_identify.device_type;
+
+	dev_printk(KERN_INFO, &mpt3sas_port->port->dev,
+	    "remove: sas_addr(0x%016llx)\n",
+	    (unsigned long long) sas_address);
+
+	ioc->logging_level |= MPT_DEBUG_TRANSPORT;
+	if (device_type == SAS_END_DEVICE)
+		mpt3sas_device_remove_by_sas_address(ioc,
+		    sas_address, port);
+	else if (device_type == SAS_EDGE_EXPANDER_DEVICE ||
+	    device_type == SAS_FANOUT_EXPANDER_DEVICE)
+		mpt3sas_expander_remove(ioc, sas_address, port);
+	ioc->logging_level &= ~MPT_DEBUG_TRANSPORT;
+}
+
+/**
+ * _transport_delete_phy - helper function to removing single phy from port
+ * @ioc: per adapter object
+ * @mpt3sas_port: mpt3sas per port object
+ * @mpt3sas_phy: mpt3sas per phy object
+ */
+static void
+_transport_delete_phy(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_port *mpt3sas_port, struct _sas_phy *mpt3sas_phy)
+{
+	u64 sas_address = mpt3sas_port->remote_identify.sas_address;
+
+	dev_printk(KERN_INFO, &mpt3sas_phy->phy->dev,
+	    "remove: sas_addr(0x%016llx), phy(%d)\n",
+	    (unsigned long long) sas_address, mpt3sas_phy->phy_id);
+
+	list_del(&mpt3sas_phy->port_siblings);
+	mpt3sas_port->num_phys--;
+	sas_port_delete_phy(mpt3sas_port->port, mpt3sas_phy->phy);
+	mpt3sas_phy->phy_belongs_to_port = 0;
+}
+
+/**
+ * _transport_add_phy - helper function to adding single phy to port
+ * @ioc: per adapter object
+ * @mpt3sas_port: mpt3sas per port object
+ * @mpt3sas_phy: mpt3sas per phy object
+ */
+static void
+_transport_add_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_port *mpt3sas_port,
+	struct _sas_phy *mpt3sas_phy)
+{
+	u64 sas_address = mpt3sas_port->remote_identify.sas_address;
+
+	dev_printk(KERN_INFO, &mpt3sas_phy->phy->dev,
+	    "add: sas_addr(0x%016llx), phy(%d)\n", (unsigned long long)
+	    sas_address, mpt3sas_phy->phy_id);
+
+	list_add_tail(&mpt3sas_phy->port_siblings, &mpt3sas_port->phy_list);
+	mpt3sas_port->num_phys++;
+	sas_port_add_phy(mpt3sas_port->port, mpt3sas_phy->phy);
+	mpt3sas_phy->phy_belongs_to_port = 1;
+}
+
+/**
+ * mpt3sas_transport_add_phy_to_an_existing_port - adding new phy to existing port
+ * @ioc: per adapter object
+ * @sas_node: sas node object (either expander or sas host)
+ * @mpt3sas_phy: mpt3sas per phy object
+ * @sas_address: sas address of device/expander were phy needs to be added to
+ * @port: hba port entry
+ */
+void
+mpt3sas_transport_add_phy_to_an_existing_port(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy,
+	u64 sas_address, struct hba_port *port)
+{
+	struct _sas_port *mpt3sas_port;
+	struct _sas_phy *phy_srch;
+
+	if (mpt3sas_phy->phy_belongs_to_port == 1)
+		return;
+
+	if (!port)
+		return;
+
+	list_for_each_entry(mpt3sas_port, &sas_node->sas_port_list,
+	    port_list) {
+		if (mpt3sas_port->remote_identify.sas_address !=
+		    sas_address)
+			continue;
+		if (mpt3sas_port->hba_port != port)
+			continue;
+		list_for_each_entry(phy_srch, &mpt3sas_port->phy_list,
+		    port_siblings) {
+			if (phy_srch == mpt3sas_phy)
+				return;
+		}
+		_transport_add_phy(ioc, mpt3sas_port, mpt3sas_phy);
+		return;
+	}
+
+}
+
+/**
+ * mpt3sas_transport_del_phy_from_an_existing_port - delete phy from existing port
+ * @ioc: per adapter object
+ * @sas_node: sas node object (either expander or sas host)
+ * @mpt3sas_phy: mpt3sas per phy object
+ */
+void
+mpt3sas_transport_del_phy_from_an_existing_port(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy)
+{
+	struct _sas_port *mpt3sas_port, *next;
+	struct _sas_phy *phy_srch;
+
+	if (mpt3sas_phy->phy_belongs_to_port == 0)
+		return;
+
+	list_for_each_entry_safe(mpt3sas_port, next, &sas_node->sas_port_list,
+	    port_list) {
+		list_for_each_entry(phy_srch, &mpt3sas_port->phy_list,
+		    port_siblings) {
+			if (phy_srch != mpt3sas_phy)
+				continue;
+
+			/*
+			 * Don't delete port during host reset,
+			 * just delete phy.
+			 */
+			if (mpt3sas_port->num_phys == 1 && !ioc->shost_recovery)
+				_transport_delete_port(ioc, mpt3sas_port);
+			else
+				_transport_delete_phy(ioc, mpt3sas_port,
+				    mpt3sas_phy);
+			return;
+		}
+	}
+}
+
+/**
+ * _transport_sanity_check - sanity check when adding a new port
+ * @ioc: per adapter object
+ * @sas_node: sas node object (either expander or sas host)
+ * @sas_address: sas address of device being added
+ * @port: hba port entry
+ *
+ * See the explanation above from _transport_delete_duplicate_port
+ */
+static void
+_transport_sanity_check(struct MPT3SAS_ADAPTER *ioc, struct _sas_node *sas_node,
+	u64 sas_address, struct hba_port *port)
+{
+	int i;
+
+	for (i = 0; i < sas_node->num_phys; i++) {
+		if (sas_node->phy[i].remote_identify.sas_address != sas_address)
+			continue;
+		if (sas_node->phy[i].port != port)
+			continue;
+		if (sas_node->phy[i].phy_belongs_to_port == 1)
+			mpt3sas_transport_del_phy_from_an_existing_port(ioc,
+			    sas_node, &sas_node->phy[i]);
+	}
+}
+
+/**
+ * mpt3sas_transport_port_add - insert port to the list
+ * @ioc: per adapter object
+ * @handle: handle of attached device
+ * @sas_address: sas address of parent expander or sas host
+ * @hba_port: hba port entry
+ * Context: This function will acquire ioc->sas_node_lock.
+ *
+ * Adding new port object to the sas_node->sas_port_list.
+ *
+ * Return: mpt3sas_port.
+ */
+struct _sas_port *
+mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	u64 sas_address, struct hba_port *hba_port)
+{
+	struct _sas_phy *mpt3sas_phy, *next;
+	struct _sas_port *mpt3sas_port;
+	unsigned long flags;
+	struct _sas_node *sas_node;
+	struct sas_rphy *rphy;
+	struct _sas_device *sas_device = NULL;
+	int i;
+	struct sas_port *port;
+	struct virtual_phy *vphy = NULL;
+
+	if (!hba_port) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		return NULL;
+	}
+
+	mpt3sas_port = kzalloc(sizeof(struct _sas_port),
+	    GFP_KERNEL);
+	if (!mpt3sas_port) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return NULL;
+	}
+
+	INIT_LIST_HEAD(&mpt3sas_port->port_list);
+	INIT_LIST_HEAD(&mpt3sas_port->phy_list);
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	sas_node = _transport_sas_node_find_by_sas_address(ioc,
+	    sas_address, hba_port);
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	if (!sas_node) {
+		ioc_err(ioc, "%s: Could not find parent sas_address(0x%016llx)!\n",
+			__func__, (u64)sas_address);
+		goto out_fail;
+	}
+
+	if ((_transport_set_identify(ioc, handle,
+	    &mpt3sas_port->remote_identify))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		goto out_fail;
+	}
+
+	if (mpt3sas_port->remote_identify.device_type == SAS_PHY_UNUSED) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		goto out_fail;
+	}
+
+	mpt3sas_port->hba_port = hba_port;
+	_transport_sanity_check(ioc, sas_node,
+	    mpt3sas_port->remote_identify.sas_address, hba_port);
+
+	for (i = 0; i < sas_node->num_phys; i++) {
+		if (sas_node->phy[i].remote_identify.sas_address !=
+		    mpt3sas_port->remote_identify.sas_address)
+			continue;
+		if (sas_node->phy[i].port != hba_port)
+			continue;
+		list_add_tail(&sas_node->phy[i].port_siblings,
+		    &mpt3sas_port->phy_list);
+		mpt3sas_port->num_phys++;
+		if (sas_node->handle <= ioc->sas_hba.num_phys) {
+			if (!sas_node->phy[i].hba_vphy) {
+				hba_port->phy_mask |= (1 << i);
+				continue;
+			}
+
+			vphy = mpt3sas_get_vphy_by_phy(ioc, hba_port, i);
+			if (!vphy) {
+				ioc_err(ioc, "failure at %s:%d/%s()!\n",
+				    __FILE__, __LINE__, __func__);
+				goto out_fail;
+			}
+		}
+	}
+
+	if (!mpt3sas_port->num_phys) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		goto out_fail;
+	}
+
+	if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) {
+		sas_device = mpt3sas_get_sdev_by_addr(ioc,
+		    mpt3sas_port->remote_identify.sas_address,
+		    mpt3sas_port->hba_port);
+		if (!sas_device) {
+			ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			    __FILE__, __LINE__, __func__);
+			goto out_fail;
+		}
+		sas_device->pend_sas_rphy_add = 1;
+	}
+
+	if (!sas_node->parent_dev) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		goto out_fail;
+	}
+	port = sas_port_alloc_num(sas_node->parent_dev);
+	if (!port || (sas_port_add(port))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		goto out_fail;
+	}
+
+	list_for_each_entry(mpt3sas_phy, &mpt3sas_port->phy_list,
+	    port_siblings) {
+		if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
+			dev_printk(KERN_INFO, &port->dev,
+				"add: handle(0x%04x), sas_addr(0x%016llx), phy(%d)\n",
+				handle, (unsigned long long)
+			    mpt3sas_port->remote_identify.sas_address,
+			    mpt3sas_phy->phy_id);
+		sas_port_add_phy(port, mpt3sas_phy->phy);
+		mpt3sas_phy->phy_belongs_to_port = 1;
+		mpt3sas_phy->port = hba_port;
+	}
+
+	mpt3sas_port->port = port;
+	if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) {
+		rphy = sas_end_device_alloc(port);
+		sas_device->rphy = rphy;
+		if (sas_node->handle <= ioc->sas_hba.num_phys) {
+			if (!vphy)
+				hba_port->sas_address =
+				    sas_device->sas_address;
+			else
+				vphy->sas_address =
+				    sas_device->sas_address;
+		}
+	} else {
+		rphy = sas_expander_alloc(port,
+		    mpt3sas_port->remote_identify.device_type);
+		if (sas_node->handle <= ioc->sas_hba.num_phys)
+			hba_port->sas_address =
+			    mpt3sas_port->remote_identify.sas_address;
+	}
+
+	if (!rphy) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		goto out_delete_port;
+	}
+
+	rphy->identify = mpt3sas_port->remote_identify;
+
+	if ((sas_rphy_add(rphy))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		sas_rphy_free(rphy);
+		rphy = NULL;
+		goto out_delete_port;
+	}
+
+	if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) {
+		sas_device->pend_sas_rphy_add = 0;
+		sas_device_put(sas_device);
+	}
+
+	dev_info(&rphy->dev,
+	    "add: handle(0x%04x), sas_addr(0x%016llx)\n", handle,
+	    (unsigned long long)mpt3sas_port->remote_identify.sas_address);
+
+	mpt3sas_port->rphy = rphy;
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	list_add_tail(&mpt3sas_port->port_list, &sas_node->sas_port_list);
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	/* fill in report manufacture */
+	if (mpt3sas_port->remote_identify.device_type ==
+	    MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER ||
+	    mpt3sas_port->remote_identify.device_type ==
+	    MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER)
+		_transport_expander_report_manufacture(ioc,
+		    mpt3sas_port->remote_identify.sas_address,
+		    rphy_to_expander_device(rphy), hba_port->port_id);
+	return mpt3sas_port;
+
+out_delete_port:
+	sas_port_delete(port);
+
+out_fail:
+	list_for_each_entry_safe(mpt3sas_phy, next, &mpt3sas_port->phy_list,
+	    port_siblings)
+		list_del(&mpt3sas_phy->port_siblings);
+	kfree(mpt3sas_port);
+	return NULL;
+}
+
+/**
+ * mpt3sas_transport_port_remove - remove port from the list
+ * @ioc: per adapter object
+ * @sas_address: sas address of attached device
+ * @sas_address_parent: sas address of parent expander or sas host
+ * @port: hba port entry
+ * Context: This function will acquire ioc->sas_node_lock.
+ *
+ * Removing object and freeing associated memory from the
+ * ioc->sas_port_list.
+ */
+void
+mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
+	u64 sas_address_parent, struct hba_port *port)
+{
+	int i;
+	unsigned long flags;
+	struct _sas_port *mpt3sas_port, *next;
+	struct _sas_node *sas_node;
+	u8 found = 0;
+	struct _sas_phy *mpt3sas_phy, *next_phy;
+	struct hba_port *hba_port_next, *hba_port = NULL;
+	struct virtual_phy *vphy, *vphy_next = NULL;
+
+	if (!port)
+		return;
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	sas_node = _transport_sas_node_find_by_sas_address(ioc,
+	    sas_address_parent, port);
+	if (!sas_node) {
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		return;
+	}
+	list_for_each_entry_safe(mpt3sas_port, next, &sas_node->sas_port_list,
+	    port_list) {
+		if (mpt3sas_port->remote_identify.sas_address != sas_address)
+			continue;
+		if (mpt3sas_port->hba_port != port)
+			continue;
+		found = 1;
+		list_del(&mpt3sas_port->port_list);
+		goto out;
+	}
+ out:
+	if (!found) {
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		return;
+	}
+
+	if (sas_node->handle <= ioc->sas_hba.num_phys &&
+	    (ioc->multipath_on_hba)) {
+		if (port->vphys_mask) {
+			list_for_each_entry_safe(vphy, vphy_next,
+			    &port->vphys_list, list) {
+				if (vphy->sas_address != sas_address)
+					continue;
+				ioc_info(ioc,
+				    "remove vphy entry: %p of port:%p,from %d port's vphys list\n",
+				    vphy, port, port->port_id);
+				port->vphys_mask &= ~vphy->phy_mask;
+				list_del(&vphy->list);
+				kfree(vphy);
+			}
+		}
+
+		list_for_each_entry_safe(hba_port, hba_port_next,
+		    &ioc->port_table_list, list) {
+			if (hba_port != port)
+				continue;
+			/*
+			 * Delete hba_port object if
+			 *  - hba_port object's sas address matches with current
+			 *    removed device's sas address and no vphy's
+			 *    associated with it.
+			 *  - Current removed device is a vSES device and
+			 *    none of the other direct attached device have
+			 *    this vSES device's port number (hence hba_port
+			 *    object sas_address field will be zero).
+			 */
+			if ((hba_port->sas_address == sas_address ||
+			    !hba_port->sas_address) && !hba_port->vphys_mask) {
+				ioc_info(ioc,
+				    "remove hba_port entry: %p port: %d from hba_port list\n",
+				    hba_port, hba_port->port_id);
+				list_del(&hba_port->list);
+				kfree(hba_port);
+			} else if (hba_port->sas_address == sas_address &&
+			    hba_port->vphys_mask) {
+				/*
+				 * Current removed device is a non vSES device
+				 * and a vSES device has the same port number
+				 * as of current device's port number. Hence
+				 * only clear the sas_address filed, don't
+				 * delete the hba_port object.
+				 */
+				ioc_info(ioc,
+				    "clearing sas_address from hba_port entry: %p port: %d from hba_port list\n",
+				    hba_port, hba_port->port_id);
+				port->sas_address = 0;
+			}
+			break;
+		}
+	}
+
+	for (i = 0; i < sas_node->num_phys; i++) {
+		if (sas_node->phy[i].remote_identify.sas_address == sas_address)
+			memset(&sas_node->phy[i].remote_identify, 0 ,
+			    sizeof(struct sas_identify));
+	}
+
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	list_for_each_entry_safe(mpt3sas_phy, next_phy,
+	    &mpt3sas_port->phy_list, port_siblings) {
+		if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
+			dev_printk(KERN_INFO, &mpt3sas_port->port->dev,
+			    "remove: sas_addr(0x%016llx), phy(%d)\n",
+			    (unsigned long long)
+			    mpt3sas_port->remote_identify.sas_address,
+			    mpt3sas_phy->phy_id);
+		mpt3sas_phy->phy_belongs_to_port = 0;
+		if (!ioc->remove_host)
+			sas_port_delete_phy(mpt3sas_port->port,
+						mpt3sas_phy->phy);
+		list_del(&mpt3sas_phy->port_siblings);
+	}
+	if (!ioc->remove_host)
+		sas_port_delete(mpt3sas_port->port);
+	ioc_info(ioc, "%s: removed: sas_addr(0x%016llx)\n",
+	    __func__, (unsigned long long)sas_address);
+	kfree(mpt3sas_port);
+}
+
+/**
+ * mpt3sas_transport_add_host_phy - report sas_host phy to transport
+ * @ioc: per adapter object
+ * @mpt3sas_phy: mpt3sas per phy object
+ * @phy_pg0: sas phy page 0
+ * @parent_dev: parent device class object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_transport_add_host_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy
+	*mpt3sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev)
+{
+	struct sas_phy *phy;
+	int phy_index = mpt3sas_phy->phy_id;
+
+
+	INIT_LIST_HEAD(&mpt3sas_phy->port_siblings);
+	phy = sas_phy_alloc(parent_dev, phy_index);
+	if (!phy) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return -1;
+	}
+	if ((_transport_set_identify(ioc, mpt3sas_phy->handle,
+	    &mpt3sas_phy->identify))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		sas_phy_free(phy);
+		return -1;
+	}
+	phy->identify = mpt3sas_phy->identify;
+	mpt3sas_phy->attached_handle = le16_to_cpu(phy_pg0.AttachedDevHandle);
+	if (mpt3sas_phy->attached_handle)
+		_transport_set_identify(ioc, mpt3sas_phy->attached_handle,
+		    &mpt3sas_phy->remote_identify);
+	phy->identify.phy_identifier = mpt3sas_phy->phy_id;
+	phy->negotiated_linkrate = _transport_convert_phy_link_rate(
+	    phy_pg0.NegotiatedLinkRate & MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL);
+	phy->minimum_linkrate_hw = _transport_convert_phy_link_rate(
+	    phy_pg0.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK);
+	phy->maximum_linkrate_hw = _transport_convert_phy_link_rate(
+	    phy_pg0.HwLinkRate >> 4);
+	phy->minimum_linkrate = _transport_convert_phy_link_rate(
+	    phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK);
+	phy->maximum_linkrate = _transport_convert_phy_link_rate(
+	    phy_pg0.ProgrammedLinkRate >> 4);
+	phy->hostdata = mpt3sas_phy->port;
+
+	if ((sas_phy_add(phy))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		sas_phy_free(phy);
+		return -1;
+	}
+	if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
+		dev_printk(KERN_INFO, &phy->dev,
+		    "add: handle(0x%04x), sas_addr(0x%016llx)\n"
+		    "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n",
+		    mpt3sas_phy->handle, (unsigned long long)
+		    mpt3sas_phy->identify.sas_address,
+		    mpt3sas_phy->attached_handle,
+		    (unsigned long long)
+		    mpt3sas_phy->remote_identify.sas_address);
+	mpt3sas_phy->phy = phy;
+	return 0;
+}
+
+
+/**
+ * mpt3sas_transport_add_expander_phy - report expander phy to transport
+ * @ioc: per adapter object
+ * @mpt3sas_phy: mpt3sas per phy object
+ * @expander_pg1: expander page 1
+ * @parent_dev: parent device class object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_transport_add_expander_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy
+	*mpt3sas_phy, Mpi2ExpanderPage1_t expander_pg1,
+	struct device *parent_dev)
+{
+	struct sas_phy *phy;
+	int phy_index = mpt3sas_phy->phy_id;
+
+	INIT_LIST_HEAD(&mpt3sas_phy->port_siblings);
+	phy = sas_phy_alloc(parent_dev, phy_index);
+	if (!phy) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return -1;
+	}
+	if ((_transport_set_identify(ioc, mpt3sas_phy->handle,
+	    &mpt3sas_phy->identify))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		sas_phy_free(phy);
+		return -1;
+	}
+	phy->identify = mpt3sas_phy->identify;
+	mpt3sas_phy->attached_handle =
+	    le16_to_cpu(expander_pg1.AttachedDevHandle);
+	if (mpt3sas_phy->attached_handle)
+		_transport_set_identify(ioc, mpt3sas_phy->attached_handle,
+		    &mpt3sas_phy->remote_identify);
+	phy->identify.phy_identifier = mpt3sas_phy->phy_id;
+	phy->negotiated_linkrate = _transport_convert_phy_link_rate(
+	    expander_pg1.NegotiatedLinkRate &
+	    MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL);
+	phy->minimum_linkrate_hw = _transport_convert_phy_link_rate(
+	    expander_pg1.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK);
+	phy->maximum_linkrate_hw = _transport_convert_phy_link_rate(
+	    expander_pg1.HwLinkRate >> 4);
+	phy->minimum_linkrate = _transport_convert_phy_link_rate(
+	    expander_pg1.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK);
+	phy->maximum_linkrate = _transport_convert_phy_link_rate(
+	    expander_pg1.ProgrammedLinkRate >> 4);
+	phy->hostdata = mpt3sas_phy->port;
+
+	if ((sas_phy_add(phy))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		sas_phy_free(phy);
+		return -1;
+	}
+	if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
+		dev_printk(KERN_INFO, &phy->dev,
+		    "add: handle(0x%04x), sas_addr(0x%016llx)\n"
+		    "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n",
+		    mpt3sas_phy->handle, (unsigned long long)
+		    mpt3sas_phy->identify.sas_address,
+		    mpt3sas_phy->attached_handle,
+		    (unsigned long long)
+		    mpt3sas_phy->remote_identify.sas_address);
+	mpt3sas_phy->phy = phy;
+	return 0;
+}
+
+/**
+ * mpt3sas_transport_update_links - refreshing phy link changes
+ * @ioc: per adapter object
+ * @sas_address: sas address of parent expander or sas host
+ * @handle: attached device handle
+ * @phy_number: phy number
+ * @link_rate: new link rate
+ * @port: hba port entry
+ *
+ * Return nothing.
+ */
+void
+mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address, u16 handle, u8 phy_number, u8 link_rate,
+	struct hba_port *port)
+{
+	unsigned long flags;
+	struct _sas_node *sas_node;
+	struct _sas_phy *mpt3sas_phy;
+	struct hba_port *hba_port = NULL;
+
+	if (ioc->shost_recovery || ioc->pci_error_recovery)
+		return;
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	sas_node = _transport_sas_node_find_by_sas_address(ioc,
+	    sas_address, port);
+	if (!sas_node) {
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		return;
+	}
+
+	mpt3sas_phy = &sas_node->phy[phy_number];
+	mpt3sas_phy->attached_handle = handle;
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+	if (handle && (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)) {
+		_transport_set_identify(ioc, handle,
+		    &mpt3sas_phy->remote_identify);
+		if ((sas_node->handle <= ioc->sas_hba.num_phys) &&
+		    (ioc->multipath_on_hba)) {
+			list_for_each_entry(hba_port,
+			    &ioc->port_table_list, list) {
+				if (hba_port->sas_address == sas_address &&
+				    hba_port == port)
+					hba_port->phy_mask |=
+					    (1 << mpt3sas_phy->phy_id);
+			}
+		}
+		mpt3sas_transport_add_phy_to_an_existing_port(ioc, sas_node,
+		    mpt3sas_phy, mpt3sas_phy->remote_identify.sas_address,
+		    port);
+	} else
+		memset(&mpt3sas_phy->remote_identify, 0 , sizeof(struct
+		    sas_identify));
+
+	if (mpt3sas_phy->phy)
+		mpt3sas_phy->phy->negotiated_linkrate =
+		    _transport_convert_phy_link_rate(link_rate);
+
+	if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
+		dev_printk(KERN_INFO, &mpt3sas_phy->phy->dev,
+		    "refresh: parent sas_addr(0x%016llx),\n"
+		    "\tlink_rate(0x%02x), phy(%d)\n"
+		    "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n",
+		    (unsigned long long)sas_address,
+		    link_rate, phy_number, handle, (unsigned long long)
+		    mpt3sas_phy->remote_identify.sas_address);
+}
+
+static inline void *
+phy_to_ioc(struct sas_phy *phy)
+{
+	struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+	return shost_priv(shost);
+}
+
+static inline void *
+rphy_to_ioc(struct sas_rphy *rphy)
+{
+	struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent);
+	return shost_priv(shost);
+}
+
+/* report phy error log structure */
+struct phy_error_log_request {
+	u8 smp_frame_type; /* 0x40 */
+	u8 function; /* 0x11 */
+	u8 allocated_response_length;
+	u8 request_length; /* 02 */
+	u8 reserved_1[5];
+	u8 phy_identifier;
+	u8 reserved_2[2];
+};
+
+/* report phy error log reply structure */
+struct phy_error_log_reply {
+	u8 smp_frame_type; /* 0x41 */
+	u8 function; /* 0x11 */
+	u8 function_result;
+	u8 response_length;
+	__be16 expander_change_count;
+	u8 reserved_1[3];
+	u8 phy_identifier;
+	u8 reserved_2[2];
+	__be32 invalid_dword;
+	__be32 running_disparity_error;
+	__be32 loss_of_dword_sync;
+	__be32 phy_reset_problem;
+};
+
+/**
+ * _transport_get_expander_phy_error_log - return expander counters
+ * @ioc: per adapter object
+ * @phy: The sas phy object
+ *
+ * Return: 0 for success, non-zero for failure.
+ *
+ */
+static int
+_transport_get_expander_phy_error_log(struct MPT3SAS_ADAPTER *ioc,
+	struct sas_phy *phy)
+{
+	Mpi2SmpPassthroughRequest_t *mpi_request;
+	Mpi2SmpPassthroughReply_t *mpi_reply;
+	struct phy_error_log_request *phy_error_log_request;
+	struct phy_error_log_reply *phy_error_log_reply;
+	int rc;
+	u16 smid;
+	void *psge;
+	u8 issue_reset = 0;
+	void *data_out = NULL;
+	dma_addr_t data_out_dma;
+	u32 sz;
+
+	if (ioc->shost_recovery || ioc->pci_error_recovery) {
+		ioc_info(ioc, "%s: host reset in progress!\n", __func__);
+		return -EFAULT;
+	}
+
+	mutex_lock(&ioc->transport_cmds.mutex);
+
+	if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) {
+		ioc_err(ioc, "%s: transport_cmds in use\n", __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+	ioc->transport_cmds.status = MPT3_CMD_PENDING;
+
+	rc = mpt3sas_wait_for_ioc(ioc, IOC_OPERATIONAL_WAIT_COUNT);
+	if (rc)
+		goto out;
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx);
+	if (!smid) {
+		ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->transport_cmds.smid = smid;
+
+	sz = sizeof(struct phy_error_log_request) +
+	    sizeof(struct phy_error_log_reply);
+	data_out = dma_alloc_coherent(&ioc->pdev->dev, sz, &data_out_dma,
+			GFP_KERNEL);
+	if (!data_out) {
+		pr_err("failure at %s:%d/%s()!\n", __FILE__,
+		    __LINE__, __func__);
+		rc = -ENOMEM;
+		mpt3sas_base_free_smid(ioc, smid);
+		goto out;
+	}
+
+	rc = -EINVAL;
+	memset(data_out, 0, sz);
+	phy_error_log_request = data_out;
+	phy_error_log_request->smp_frame_type = 0x40;
+	phy_error_log_request->function = 0x11;
+	phy_error_log_request->request_length = 2;
+	phy_error_log_request->allocated_response_length = 0;
+	phy_error_log_request->phy_identifier = phy->number;
+
+	memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
+	mpi_request->PhysicalPort = _transport_get_port_id_by_sas_phy(phy);
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
+	mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address);
+	mpi_request->RequestDataLength =
+	    cpu_to_le16(sizeof(struct phy_error_log_request));
+	psge = &mpi_request->SGL;
+
+	ioc->build_sg(ioc, psge, data_out_dma,
+		sizeof(struct phy_error_log_request),
+	    data_out_dma + sizeof(struct phy_error_log_request),
+	    sizeof(struct phy_error_log_reply));
+
+	dtransportprintk(ioc,
+			 ioc_info(ioc, "phy_error_log - send to sas_addr(0x%016llx), phy(%d)\n",
+				  (u64)phy->identify.sas_address,
+				  phy->number));
+	init_completion(&ioc->transport_cmds.done);
+	ioc->put_smid_default(ioc, smid);
+	wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ);
+
+	if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) {
+		ioc_err(ioc, "%s: timeout\n", __func__);
+		_debug_dump_mf(mpi_request,
+		    sizeof(Mpi2SmpPassthroughRequest_t)/4);
+		if (!(ioc->transport_cmds.status & MPT3_CMD_RESET))
+			issue_reset = 1;
+		goto issue_host_reset;
+	}
+
+	dtransportprintk(ioc, ioc_info(ioc, "phy_error_log - complete\n"));
+
+	if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) {
+
+		mpi_reply = ioc->transport_cmds.reply;
+
+		dtransportprintk(ioc,
+				 ioc_info(ioc, "phy_error_log - reply data transfer size(%d)\n",
+					  le16_to_cpu(mpi_reply->ResponseDataLength)));
+
+		if (le16_to_cpu(mpi_reply->ResponseDataLength) !=
+		    sizeof(struct phy_error_log_reply))
+			goto out;
+
+		phy_error_log_reply = data_out +
+		    sizeof(struct phy_error_log_request);
+
+		dtransportprintk(ioc,
+				 ioc_info(ioc, "phy_error_log - function_result(%d)\n",
+					  phy_error_log_reply->function_result));
+
+		phy->invalid_dword_count =
+		    be32_to_cpu(phy_error_log_reply->invalid_dword);
+		phy->running_disparity_error_count =
+		    be32_to_cpu(phy_error_log_reply->running_disparity_error);
+		phy->loss_of_dword_sync_count =
+		    be32_to_cpu(phy_error_log_reply->loss_of_dword_sync);
+		phy->phy_reset_problem_count =
+		    be32_to_cpu(phy_error_log_reply->phy_reset_problem);
+		rc = 0;
+	} else
+		dtransportprintk(ioc,
+				 ioc_info(ioc, "phy_error_log - no reply\n"));
+
+ issue_host_reset:
+	if (issue_reset)
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+ out:
+	ioc->transport_cmds.status = MPT3_CMD_NOT_USED;
+	if (data_out)
+		dma_free_coherent(&ioc->pdev->dev, sz, data_out, data_out_dma);
+
+	mutex_unlock(&ioc->transport_cmds.mutex);
+	return rc;
+}
+
+/**
+ * _transport_get_linkerrors - return phy counters for both hba and expanders
+ * @phy: The sas phy object
+ *
+ * Return: 0 for success, non-zero for failure.
+ *
+ */
+static int
+_transport_get_linkerrors(struct sas_phy *phy)
+{
+	struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy);
+	unsigned long flags;
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasPhyPage1_t phy_pg1;
+	struct hba_port *port = phy->hostdata;
+	int port_id = port->port_id;
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	if (_transport_sas_node_find_by_sas_address(ioc,
+	    phy->identify.sas_address,
+	    mpt3sas_get_port_by_id(ioc, port_id, 0)) == NULL) {
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		return -EINVAL;
+	}
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	if (phy->identify.sas_address != ioc->sas_hba.sas_address)
+		return _transport_get_expander_phy_error_log(ioc, phy);
+
+	/* get hba phy error logs */
+	if ((mpt3sas_config_get_phy_pg1(ioc, &mpi_reply, &phy_pg1,
+		    phy->number))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return -ENXIO;
+	}
+
+	if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo)
+		ioc_info(ioc, "phy(%d), ioc_status (0x%04x), loginfo(0x%08x)\n",
+			 phy->number,
+			 le16_to_cpu(mpi_reply.IOCStatus),
+			 le32_to_cpu(mpi_reply.IOCLogInfo));
+
+	phy->invalid_dword_count = le32_to_cpu(phy_pg1.InvalidDwordCount);
+	phy->running_disparity_error_count =
+	    le32_to_cpu(phy_pg1.RunningDisparityErrorCount);
+	phy->loss_of_dword_sync_count =
+	    le32_to_cpu(phy_pg1.LossDwordSynchCount);
+	phy->phy_reset_problem_count =
+	    le32_to_cpu(phy_pg1.PhyResetProblemCount);
+	return 0;
+}
+
+/**
+ * _transport_get_enclosure_identifier -
+ * @rphy: The sas phy object
+ * @identifier: ?
+ *
+ * Obtain the enclosure logical id for an expander.
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
+{
+	struct MPT3SAS_ADAPTER *ioc = rphy_to_ioc(rphy);
+	struct _sas_device *sas_device;
+	unsigned long flags;
+	int rc;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_by_rphy(ioc, rphy);
+	if (sas_device) {
+		*identifier = sas_device->enclosure_logical_id;
+		rc = 0;
+		sas_device_put(sas_device);
+	} else {
+		*identifier = 0;
+		rc = -ENXIO;
+	}
+
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	return rc;
+}
+
+/**
+ * _transport_get_bay_identifier -
+ * @rphy: The sas phy object
+ *
+ * Return: the slot id for a device that resides inside an enclosure.
+ */
+static int
+_transport_get_bay_identifier(struct sas_rphy *rphy)
+{
+	struct MPT3SAS_ADAPTER *ioc = rphy_to_ioc(rphy);
+	struct _sas_device *sas_device;
+	unsigned long flags;
+	int rc;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = __mpt3sas_get_sdev_by_rphy(ioc, rphy);
+	if (sas_device) {
+		rc = sas_device->slot;
+		sas_device_put(sas_device);
+	} else {
+		rc = -ENXIO;
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	return rc;
+}
+
+/* phy control request structure */
+struct phy_control_request {
+	u8 smp_frame_type; /* 0x40 */
+	u8 function; /* 0x91 */
+	u8 allocated_response_length;
+	u8 request_length; /* 0x09 */
+	u16 expander_change_count;
+	u8 reserved_1[3];
+	u8 phy_identifier;
+	u8 phy_operation;
+	u8 reserved_2[13];
+	u64 attached_device_name;
+	u8 programmed_min_physical_link_rate;
+	u8 programmed_max_physical_link_rate;
+	u8 reserved_3[6];
+};
+
+/* phy control reply structure */
+struct phy_control_reply {
+	u8 smp_frame_type; /* 0x41 */
+	u8 function; /* 0x11 */
+	u8 function_result;
+	u8 response_length;
+};
+
+#define SMP_PHY_CONTROL_LINK_RESET	(0x01)
+#define SMP_PHY_CONTROL_HARD_RESET	(0x02)
+#define SMP_PHY_CONTROL_DISABLE		(0x03)
+
+/**
+ * _transport_expander_phy_control - expander phy control
+ * @ioc: per adapter object
+ * @phy: The sas phy object
+ * @phy_operation: ?
+ *
+ * Return: 0 for success, non-zero for failure.
+ *
+ */
+static int
+_transport_expander_phy_control(struct MPT3SAS_ADAPTER *ioc,
+	struct sas_phy *phy, u8 phy_operation)
+{
+	Mpi2SmpPassthroughRequest_t *mpi_request;
+	Mpi2SmpPassthroughReply_t *mpi_reply;
+	struct phy_control_request *phy_control_request;
+	struct phy_control_reply *phy_control_reply;
+	int rc;
+	u16 smid;
+	void *psge;
+	u8 issue_reset = 0;
+	void *data_out = NULL;
+	dma_addr_t data_out_dma;
+	u32 sz;
+
+	if (ioc->shost_recovery || ioc->pci_error_recovery) {
+		ioc_info(ioc, "%s: host reset in progress!\n", __func__);
+		return -EFAULT;
+	}
+
+	mutex_lock(&ioc->transport_cmds.mutex);
+
+	if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) {
+		ioc_err(ioc, "%s: transport_cmds in use\n", __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+	ioc->transport_cmds.status = MPT3_CMD_PENDING;
+
+	rc = mpt3sas_wait_for_ioc(ioc, IOC_OPERATIONAL_WAIT_COUNT);
+	if (rc)
+		goto out;
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx);
+	if (!smid) {
+		ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->transport_cmds.smid = smid;
+
+	sz = sizeof(struct phy_control_request) +
+	    sizeof(struct phy_control_reply);
+	data_out = dma_alloc_coherent(&ioc->pdev->dev, sz, &data_out_dma,
+			GFP_KERNEL);
+	if (!data_out) {
+		pr_err("failure at %s:%d/%s()!\n", __FILE__,
+		    __LINE__, __func__);
+		rc = -ENOMEM;
+		mpt3sas_base_free_smid(ioc, smid);
+		goto out;
+	}
+
+	rc = -EINVAL;
+	memset(data_out, 0, sz);
+	phy_control_request = data_out;
+	phy_control_request->smp_frame_type = 0x40;
+	phy_control_request->function = 0x91;
+	phy_control_request->request_length = 9;
+	phy_control_request->allocated_response_length = 0;
+	phy_control_request->phy_identifier = phy->number;
+	phy_control_request->phy_operation = phy_operation;
+	phy_control_request->programmed_min_physical_link_rate =
+	    phy->minimum_linkrate << 4;
+	phy_control_request->programmed_max_physical_link_rate =
+	    phy->maximum_linkrate << 4;
+
+	memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
+	mpi_request->PhysicalPort = _transport_get_port_id_by_sas_phy(phy);
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
+	mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address);
+	mpi_request->RequestDataLength =
+	    cpu_to_le16(sizeof(struct phy_error_log_request));
+	psge = &mpi_request->SGL;
+
+	ioc->build_sg(ioc, psge, data_out_dma,
+			    sizeof(struct phy_control_request),
+	    data_out_dma + sizeof(struct phy_control_request),
+	    sizeof(struct phy_control_reply));
+
+	dtransportprintk(ioc,
+			 ioc_info(ioc, "phy_control - send to sas_addr(0x%016llx), phy(%d), opcode(%d)\n",
+				  (u64)phy->identify.sas_address,
+				  phy->number, phy_operation));
+	init_completion(&ioc->transport_cmds.done);
+	ioc->put_smid_default(ioc, smid);
+	wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ);
+
+	if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) {
+		ioc_err(ioc, "%s: timeout\n", __func__);
+		_debug_dump_mf(mpi_request,
+		    sizeof(Mpi2SmpPassthroughRequest_t)/4);
+		if (!(ioc->transport_cmds.status & MPT3_CMD_RESET))
+			issue_reset = 1;
+		goto issue_host_reset;
+	}
+
+	dtransportprintk(ioc, ioc_info(ioc, "phy_control - complete\n"));
+
+	if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) {
+
+		mpi_reply = ioc->transport_cmds.reply;
+
+		dtransportprintk(ioc,
+				 ioc_info(ioc, "phy_control - reply data transfer size(%d)\n",
+					  le16_to_cpu(mpi_reply->ResponseDataLength)));
+
+		if (le16_to_cpu(mpi_reply->ResponseDataLength) !=
+		    sizeof(struct phy_control_reply))
+			goto out;
+
+		phy_control_reply = data_out +
+		    sizeof(struct phy_control_request);
+
+		dtransportprintk(ioc,
+				 ioc_info(ioc, "phy_control - function_result(%d)\n",
+					  phy_control_reply->function_result));
+
+		rc = 0;
+	} else
+		dtransportprintk(ioc,
+				 ioc_info(ioc, "phy_control - no reply\n"));
+
+ issue_host_reset:
+	if (issue_reset)
+		mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+ out:
+	ioc->transport_cmds.status = MPT3_CMD_NOT_USED;
+	if (data_out)
+		dma_free_coherent(&ioc->pdev->dev, sz, data_out,
+				data_out_dma);
+
+	mutex_unlock(&ioc->transport_cmds.mutex);
+	return rc;
+}
+
+/**
+ * _transport_phy_reset -
+ * @phy: The sas phy object
+ * @hard_reset:
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_transport_phy_reset(struct sas_phy *phy, int hard_reset)
+{
+	struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy);
+	Mpi2SasIoUnitControlReply_t mpi_reply;
+	Mpi2SasIoUnitControlRequest_t mpi_request;
+	struct hba_port *port = phy->hostdata;
+	int port_id = port->port_id;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	if (_transport_sas_node_find_by_sas_address(ioc,
+	    phy->identify.sas_address,
+	    mpt3sas_get_port_by_id(ioc, port_id, 0)) == NULL) {
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		return -EINVAL;
+	}
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	/* handle expander phys */
+	if (phy->identify.sas_address != ioc->sas_hba.sas_address)
+		return _transport_expander_phy_control(ioc, phy,
+		    (hard_reset == 1) ? SMP_PHY_CONTROL_HARD_RESET :
+		    SMP_PHY_CONTROL_LINK_RESET);
+
+	/* handle hba phys */
+	memset(&mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
+	mpi_request.Operation = hard_reset ?
+	    MPI2_SAS_OP_PHY_HARD_RESET : MPI2_SAS_OP_PHY_LINK_RESET;
+	mpi_request.PhyNum = phy->number;
+
+	if ((mpt3sas_base_sas_iounit_control(ioc, &mpi_reply, &mpi_request))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		return -ENXIO;
+	}
+
+	if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo)
+		ioc_info(ioc, "phy(%d), ioc_status(0x%04x), loginfo(0x%08x)\n",
+			 phy->number, le16_to_cpu(mpi_reply.IOCStatus),
+			 le32_to_cpu(mpi_reply.IOCLogInfo));
+
+	return 0;
+}
+
+/**
+ * _transport_phy_enable - enable/disable phys
+ * @phy: The sas phy object
+ * @enable: enable phy when true
+ *
+ * Only support sas_host direct attached phys.
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_transport_phy_enable(struct sas_phy *phy, int enable)
+{
+	struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy);
+	Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
+	Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 ioc_status;
+	u16 sz;
+	int rc = 0;
+	unsigned long flags;
+	int i, discovery_active;
+	struct hba_port *port = phy->hostdata;
+	int port_id = port->port_id;
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	if (_transport_sas_node_find_by_sas_address(ioc,
+	    phy->identify.sas_address,
+	    mpt3sas_get_port_by_id(ioc, port_id, 0)) == NULL) {
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		return -EINVAL;
+	}
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	/* handle expander phys */
+	if (phy->identify.sas_address != ioc->sas_hba.sas_address)
+		return _transport_expander_phy_control(ioc, phy,
+		    (enable == 1) ? SMP_PHY_CONTROL_LINK_RESET :
+		    SMP_PHY_CONTROL_DISABLE);
+
+	/* handle hba phys */
+
+	/* read sas_iounit page 0 */
+	sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys *
+	    sizeof(Mpi2SasIOUnit0PhyData_t));
+	sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
+	if (!sas_iounit_pg0) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		rc = -ENOMEM;
+		goto out;
+	}
+	if ((mpt3sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
+	    sas_iounit_pg0, sz))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		rc = -ENXIO;
+		goto out;
+	}
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		rc = -EIO;
+		goto out;
+	}
+
+	/* unable to enable/disable phys when when discovery is active */
+	for (i = 0, discovery_active = 0; i < ioc->sas_hba.num_phys ; i++) {
+		if (sas_iounit_pg0->PhyData[i].PortFlags &
+		    MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS) {
+			ioc_err(ioc, "discovery is active on port = %d, phy = %d: unable to enable/disable phys, try again later!\n",
+				sas_iounit_pg0->PhyData[i].Port, i);
+			discovery_active = 1;
+		}
+	}
+
+	if (discovery_active) {
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	/* read sas_iounit page 1 */
+	sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
+	    sizeof(Mpi2SasIOUnit1PhyData_t));
+	sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
+	if (!sas_iounit_pg1) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		rc = -ENOMEM;
+		goto out;
+	}
+	if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
+	    sas_iounit_pg1, sz))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		rc = -ENXIO;
+		goto out;
+	}
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		rc = -EIO;
+		goto out;
+	}
+
+	/* copy Port/PortFlags/PhyFlags from page 0 */
+	for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
+		sas_iounit_pg1->PhyData[i].Port =
+		    sas_iounit_pg0->PhyData[i].Port;
+		sas_iounit_pg1->PhyData[i].PortFlags =
+		    (sas_iounit_pg0->PhyData[i].PortFlags &
+		    MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG);
+		sas_iounit_pg1->PhyData[i].PhyFlags =
+		    (sas_iounit_pg0->PhyData[i].PhyFlags &
+		    (MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED +
+		    MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED));
+	}
+
+	if (enable)
+		sas_iounit_pg1->PhyData[phy->number].PhyFlags
+		    &= ~MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE;
+	else
+		sas_iounit_pg1->PhyData[phy->number].PhyFlags
+		    |= MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE;
+
+	mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, sz);
+
+	/* link reset */
+	if (enable)
+		_transport_phy_reset(phy, 0);
+
+ out:
+	kfree(sas_iounit_pg1);
+	kfree(sas_iounit_pg0);
+	return rc;
+}
+
+/**
+ * _transport_phy_speed - set phy min/max link rates
+ * @phy: The sas phy object
+ * @rates: rates defined in sas_phy_linkrates
+ *
+ * Only support sas_host direct attached phys.
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates)
+{
+	struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy);
+	Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
+	Mpi2SasPhyPage0_t phy_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 ioc_status;
+	u16 sz;
+	int i;
+	int rc = 0;
+	unsigned long flags;
+	struct hba_port *port = phy->hostdata;
+	int port_id = port->port_id;
+
+	spin_lock_irqsave(&ioc->sas_node_lock, flags);
+	if (_transport_sas_node_find_by_sas_address(ioc,
+	    phy->identify.sas_address,
+	    mpt3sas_get_port_by_id(ioc, port_id, 0)) == NULL) {
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		return -EINVAL;
+	}
+	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+	if (!rates->minimum_linkrate)
+		rates->minimum_linkrate = phy->minimum_linkrate;
+	else if (rates->minimum_linkrate < phy->minimum_linkrate_hw)
+		rates->minimum_linkrate = phy->minimum_linkrate_hw;
+
+	if (!rates->maximum_linkrate)
+		rates->maximum_linkrate = phy->maximum_linkrate;
+	else if (rates->maximum_linkrate > phy->maximum_linkrate_hw)
+		rates->maximum_linkrate = phy->maximum_linkrate_hw;
+
+	/* handle expander phys */
+	if (phy->identify.sas_address != ioc->sas_hba.sas_address) {
+		phy->minimum_linkrate = rates->minimum_linkrate;
+		phy->maximum_linkrate = rates->maximum_linkrate;
+		return _transport_expander_phy_control(ioc, phy,
+		    SMP_PHY_CONTROL_LINK_RESET);
+	}
+
+	/* handle hba phys */
+
+	/* sas_iounit page 1 */
+	sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
+	    sizeof(Mpi2SasIOUnit1PhyData_t));
+	sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
+	if (!sas_iounit_pg1) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		rc = -ENOMEM;
+		goto out;
+	}
+	if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
+	    sas_iounit_pg1, sz))) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		rc = -ENXIO;
+		goto out;
+	}
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		rc = -EIO;
+		goto out;
+	}
+
+	for (i = 0; i < ioc->sas_hba.num_phys; i++) {
+		if (phy->number != i) {
+			sas_iounit_pg1->PhyData[i].MaxMinLinkRate =
+			    (ioc->sas_hba.phy[i].phy->minimum_linkrate +
+			    (ioc->sas_hba.phy[i].phy->maximum_linkrate << 4));
+		} else {
+			sas_iounit_pg1->PhyData[i].MaxMinLinkRate =
+			    (rates->minimum_linkrate +
+			    (rates->maximum_linkrate << 4));
+		}
+	}
+
+	if (mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1,
+	    sz)) {
+		ioc_err(ioc, "failure at %s:%d/%s()!\n",
+			__FILE__, __LINE__, __func__);
+		rc = -ENXIO;
+		goto out;
+	}
+
+	/* link reset */
+	_transport_phy_reset(phy, 0);
+
+	/* read phy page 0, then update the rates in the sas transport phy */
+	if (!mpt3sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0,
+	    phy->number)) {
+		phy->minimum_linkrate = _transport_convert_phy_link_rate(
+		    phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK);
+		phy->maximum_linkrate = _transport_convert_phy_link_rate(
+		    phy_pg0.ProgrammedLinkRate >> 4);
+		phy->negotiated_linkrate = _transport_convert_phy_link_rate(
+		    phy_pg0.NegotiatedLinkRate &
+		    MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL);
+	}
+
+ out:
+	kfree(sas_iounit_pg1);
+	return rc;
+}
+
+static int
+_transport_map_smp_buffer(struct device *dev, struct bsg_buffer *buf,
+		dma_addr_t *dma_addr, size_t *dma_len, void **p)
+{
+	/* Check if the request is split across multiple segments */
+	if (buf->sg_cnt > 1) {
+		*p = dma_alloc_coherent(dev, buf->payload_len, dma_addr,
+				GFP_KERNEL);
+		if (!*p)
+			return -ENOMEM;
+		*dma_len = buf->payload_len;
+	} else {
+		if (!dma_map_sg(dev, buf->sg_list, 1, DMA_BIDIRECTIONAL))
+			return -ENOMEM;
+		*dma_addr = sg_dma_address(buf->sg_list);
+		*dma_len = sg_dma_len(buf->sg_list);
+		*p = NULL;
+	}
+
+	return 0;
+}
+
+static void
+_transport_unmap_smp_buffer(struct device *dev, struct bsg_buffer *buf,
+		dma_addr_t dma_addr, void *p)
+{
+	if (p)
+		dma_free_coherent(dev, buf->payload_len, p, dma_addr);
+	else
+		dma_unmap_sg(dev, buf->sg_list, 1, DMA_BIDIRECTIONAL);
+}
+
+/**
+ * _transport_smp_handler - transport portal for smp passthru
+ * @job: ?
+ * @shost: shost object
+ * @rphy: sas transport rphy object
+ *
+ * This used primarily for smp_utils.
+ * Example:
+ *           smp_rep_general /sys/class/bsg/expander-5:0
+ */
+static void
+_transport_smp_handler(struct bsg_job *job, struct Scsi_Host *shost,
+		struct sas_rphy *rphy)
+{
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	Mpi2SmpPassthroughRequest_t *mpi_request;
+	Mpi2SmpPassthroughReply_t *mpi_reply;
+	int rc;
+	u16 smid;
+	void *psge;
+	dma_addr_t dma_addr_in;
+	dma_addr_t dma_addr_out;
+	void *addr_in = NULL;
+	void *addr_out = NULL;
+	size_t dma_len_in;
+	size_t dma_len_out;
+	unsigned int reslen = 0;
+
+	if (ioc->shost_recovery || ioc->pci_error_recovery) {
+		ioc_info(ioc, "%s: host reset in progress!\n", __func__);
+		rc = -EFAULT;
+		goto job_done;
+	}
+
+	rc = mutex_lock_interruptible(&ioc->transport_cmds.mutex);
+	if (rc)
+		goto job_done;
+
+	if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) {
+		ioc_err(ioc, "%s: transport_cmds in use\n",
+			__func__);
+		rc = -EAGAIN;
+		goto out;
+	}
+	ioc->transport_cmds.status = MPT3_CMD_PENDING;
+
+	rc = _transport_map_smp_buffer(&ioc->pdev->dev, &job->request_payload,
+			&dma_addr_out, &dma_len_out, &addr_out);
+	if (rc)
+		goto out;
+	if (addr_out) {
+		sg_copy_to_buffer(job->request_payload.sg_list,
+				job->request_payload.sg_cnt, addr_out,
+				job->request_payload.payload_len);
+	}
+
+	rc = _transport_map_smp_buffer(&ioc->pdev->dev, &job->reply_payload,
+			&dma_addr_in, &dma_len_in, &addr_in);
+	if (rc)
+		goto unmap_out;
+
+	rc = mpt3sas_wait_for_ioc(ioc, IOC_OPERATIONAL_WAIT_COUNT);
+	if (rc)
+		goto unmap_in;
+
+	smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx);
+	if (!smid) {
+		ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
+		rc = -EAGAIN;
+		goto unmap_in;
+	}
+
+	rc = 0;
+	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+	ioc->transport_cmds.smid = smid;
+
+	memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
+	mpi_request->PhysicalPort = _transport_get_port_id_by_rphy(ioc, rphy);
+	mpi_request->SASAddress = (rphy) ?
+	    cpu_to_le64(rphy->identify.sas_address) :
+	    cpu_to_le64(ioc->sas_hba.sas_address);
+	mpi_request->RequestDataLength = cpu_to_le16(dma_len_out - 4);
+	psge = &mpi_request->SGL;
+
+	ioc->build_sg(ioc, psge, dma_addr_out, dma_len_out - 4, dma_addr_in,
+			dma_len_in - 4);
+
+	dtransportprintk(ioc,
+			 ioc_info(ioc, "%s: sending smp request\n", __func__));
+
+	init_completion(&ioc->transport_cmds.done);
+	ioc->put_smid_default(ioc, smid);
+	wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ);
+
+	if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) {
+		ioc_err(ioc, "%s: timeout\n", __func__);
+		_debug_dump_mf(mpi_request,
+		    sizeof(Mpi2SmpPassthroughRequest_t)/4);
+		if (!(ioc->transport_cmds.status & MPT3_CMD_RESET)) {
+			mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+			rc = -ETIMEDOUT;
+			goto unmap_in;
+		}
+	}
+
+	dtransportprintk(ioc, ioc_info(ioc, "%s - complete\n", __func__));
+
+	if (!(ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID)) {
+		dtransportprintk(ioc,
+				 ioc_info(ioc, "%s: no reply\n", __func__));
+		rc = -ENXIO;
+		goto unmap_in;
+	}
+
+	mpi_reply = ioc->transport_cmds.reply;
+
+	dtransportprintk(ioc,
+			 ioc_info(ioc, "%s: reply data transfer size(%d)\n",
+				  __func__,
+				  le16_to_cpu(mpi_reply->ResponseDataLength)));
+
+	memcpy(job->reply, mpi_reply, sizeof(*mpi_reply));
+	job->reply_len = sizeof(*mpi_reply);
+	reslen = le16_to_cpu(mpi_reply->ResponseDataLength);
+
+	if (addr_in) {
+		sg_copy_to_buffer(job->reply_payload.sg_list,
+				job->reply_payload.sg_cnt, addr_in,
+				job->reply_payload.payload_len);
+	}
+
+	rc = 0;
+ unmap_in:
+	_transport_unmap_smp_buffer(&ioc->pdev->dev, &job->reply_payload,
+			dma_addr_in, addr_in);
+ unmap_out:
+	_transport_unmap_smp_buffer(&ioc->pdev->dev, &job->request_payload,
+			dma_addr_out, addr_out);
+ out:
+	ioc->transport_cmds.status = MPT3_CMD_NOT_USED;
+	mutex_unlock(&ioc->transport_cmds.mutex);
+job_done:
+	bsg_job_done(job, rc, reslen);
+}
+
+struct sas_function_template mpt3sas_transport_functions = {
+	.get_linkerrors		= _transport_get_linkerrors,
+	.get_enclosure_identifier = _transport_get_enclosure_identifier,
+	.get_bay_identifier	= _transport_get_bay_identifier,
+	.phy_reset		= _transport_phy_reset,
+	.phy_enable		= _transport_phy_enable,
+	.set_phy_speed		= _transport_phy_speed,
+	.smp_handler		= _transport_smp_handler,
+};
+
+struct scsi_transport_template *mpt3sas_transport_template;
diff --git a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
new file mode 100644
index 0000000000..d9b7d0ee25
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
@@ -0,0 +1,473 @@
+/*
+ * This module provides common API to set Diagnostic trigger for MPT
+ * (Message Passing Technology) based controllers
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
+ * Copyright (C) 2012-2014  LSI Corporation
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/compat.h>
+#include <linux/poll.h>
+
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include "mpt3sas_base.h"
+
+/**
+ * _mpt3sas_raise_sigio - notifiy app
+ * @ioc: per adapter object
+ * @event_data: ?
+ */
+static void
+_mpt3sas_raise_sigio(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data)
+{
+	Mpi2EventNotificationReply_t *mpi_reply;
+	u16 sz, event_data_sz;
+	unsigned long flags;
+
+	dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: enter\n", __func__));
+
+	sz = offsetof(Mpi2EventNotificationReply_t, EventData) +
+	    sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T) + 4;
+	mpi_reply = kzalloc(sz, GFP_KERNEL);
+	if (!mpi_reply)
+		goto out;
+	mpi_reply->Event = cpu_to_le16(MPI3_EVENT_DIAGNOSTIC_TRIGGER_FIRED);
+	event_data_sz = (sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T) + 4) / 4;
+	mpi_reply->EventDataLength = cpu_to_le16(event_data_sz);
+	memcpy(&mpi_reply->EventData, event_data,
+	    sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
+	dTriggerDiagPrintk(ioc,
+			   ioc_info(ioc, "%s: add to driver event log\n",
+				    __func__));
+	mpt3sas_ctl_add_to_event_log(ioc, mpi_reply);
+	kfree(mpi_reply);
+ out:
+
+	/* clearing the diag_trigger_active flag */
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+	dTriggerDiagPrintk(ioc,
+			   ioc_info(ioc, "%s: clearing diag_trigger_active flag\n",
+				    __func__));
+	ioc->diag_trigger_active = 0;
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+
+	dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: exit\n",
+					 __func__));
+}
+
+/**
+ * mpt3sas_process_trigger_data - process the event data for the trigger
+ * @ioc: per adapter object
+ * @event_data: ?
+ */
+void
+mpt3sas_process_trigger_data(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data)
+{
+	u8 issue_reset = 0;
+	u32 *trig_data = (u32 *)&event_data->u.master;
+
+	dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: enter\n", __func__));
+
+	/* release the diag buffer trace */
+	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED) == 0) {
+		/*
+		 * add a log message so that user knows which event caused
+		 * the release
+		 */
+		ioc_info(ioc,
+		    "%s: Releasing the trace buffer. Trigger_Type 0x%08x, Data[0] 0x%08x, Data[1] 0x%08x\n",
+		    __func__, event_data->trigger_type,
+		    trig_data[0], trig_data[1]);
+		mpt3sas_send_diag_release(ioc, MPI2_DIAG_BUF_TYPE_TRACE,
+		    &issue_reset);
+	}
+
+	ioc->htb_rel.buffer_rel_condition = MPT3_DIAG_BUFFER_REL_TRIGGER;
+	if (event_data) {
+		ioc->htb_rel.trigger_type = event_data->trigger_type;
+		switch (event_data->trigger_type) {
+		case MPT3SAS_TRIGGER_SCSI:
+			memcpy(&ioc->htb_rel.trigger_info_dwords,
+			    &event_data->u.scsi,
+			    sizeof(struct SL_WH_SCSI_TRIGGER_T));
+			break;
+		case MPT3SAS_TRIGGER_MPI:
+			memcpy(&ioc->htb_rel.trigger_info_dwords,
+			    &event_data->u.mpi,
+			    sizeof(struct SL_WH_MPI_TRIGGER_T));
+			break;
+		case MPT3SAS_TRIGGER_MASTER:
+			ioc->htb_rel.trigger_info_dwords[0] =
+			    event_data->u.master.MasterData;
+			break;
+		case MPT3SAS_TRIGGER_EVENT:
+			memcpy(&ioc->htb_rel.trigger_info_dwords,
+			    &event_data->u.event,
+			    sizeof(struct SL_WH_EVENT_TRIGGER_T));
+			break;
+		default:
+			ioc_err(ioc, "%d - Is not a valid Trigger type\n",
+			    event_data->trigger_type);
+			break;
+		}
+	}
+	_mpt3sas_raise_sigio(ioc, event_data);
+
+	dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: exit\n",
+					 __func__));
+}
+
+/**
+ * mpt3sas_trigger_master - Master trigger handler
+ * @ioc: per adapter object
+ * @trigger_bitmask:
+ *
+ */
+void
+mpt3sas_trigger_master(struct MPT3SAS_ADAPTER *ioc, u32 trigger_bitmask)
+{
+	struct SL_WH_TRIGGERS_EVENT_DATA_T event_data;
+	unsigned long flags;
+	u8 found_match = 0;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+
+	if (trigger_bitmask & MASTER_TRIGGER_FW_FAULT ||
+	    trigger_bitmask & MASTER_TRIGGER_ADAPTER_RESET)
+		goto by_pass_checks;
+
+	/* check to see if trace buffers are currently registered */
+	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+	/* check to see if trace buffers are currently released */
+	if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+ by_pass_checks:
+
+	dTriggerDiagPrintk(ioc,
+			   ioc_info(ioc, "%s: enter - trigger_bitmask = 0x%08x\n",
+				    __func__, trigger_bitmask));
+
+	/* don't send trigger if an trigger is currently active */
+	if (ioc->diag_trigger_active) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		goto out;
+	}
+
+	/* check for the trigger condition */
+	if (ioc->diag_trigger_master.MasterData & trigger_bitmask) {
+		found_match = 1;
+		ioc->diag_trigger_active = 1;
+		dTriggerDiagPrintk(ioc,
+				   ioc_info(ioc, "%s: setting diag_trigger_active flag\n",
+					    __func__));
+	}
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+
+	if (!found_match)
+		goto out;
+
+	memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
+	event_data.trigger_type = MPT3SAS_TRIGGER_MASTER;
+	event_data.u.master.MasterData = trigger_bitmask;
+
+	if (trigger_bitmask & MASTER_TRIGGER_FW_FAULT ||
+	    trigger_bitmask & MASTER_TRIGGER_ADAPTER_RESET) {
+		ioc->htb_rel.trigger_type = MPT3SAS_TRIGGER_MASTER;
+		ioc->htb_rel.trigger_info_dwords[0] = trigger_bitmask;
+		if (ioc->reset_from_user)
+			ioc->htb_rel.trigger_info_dwords[1] =
+			    MPT_DIAG_RESET_ISSUED_BY_USER;
+		_mpt3sas_raise_sigio(ioc, &event_data);
+	} else
+		mpt3sas_send_trigger_data_event(ioc, &event_data);
+
+ out:
+	dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: exit\n",
+					 __func__));
+}
+
+/**
+ * mpt3sas_trigger_event - Event trigger handler
+ * @ioc: per adapter object
+ * @event: ?
+ * @log_entry_qualifier: ?
+ *
+ */
+void
+mpt3sas_trigger_event(struct MPT3SAS_ADAPTER *ioc, u16 event,
+	u16 log_entry_qualifier)
+{
+	struct SL_WH_TRIGGERS_EVENT_DATA_T event_data;
+	struct SL_WH_EVENT_TRIGGER_T *event_trigger;
+	int i;
+	unsigned long flags;
+	u8 found_match;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+
+	/* check to see if trace buffers are currently registered */
+	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+	/* check to see if trace buffers are currently released */
+	if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+	dTriggerDiagPrintk(ioc,
+			   ioc_info(ioc, "%s: enter - event = 0x%04x, log_entry_qualifier = 0x%04x\n",
+				    __func__, event, log_entry_qualifier));
+
+	/* don't send trigger if an trigger is currently active */
+	if (ioc->diag_trigger_active) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		goto out;
+	}
+
+	/* check for the trigger condition */
+	event_trigger = ioc->diag_trigger_event.EventTriggerEntry;
+	for (i = 0 , found_match = 0; i < ioc->diag_trigger_event.ValidEntries
+	    && !found_match; i++, event_trigger++) {
+		if (event_trigger->EventValue != event)
+			continue;
+		if (event == MPI2_EVENT_LOG_ENTRY_ADDED) {
+			if (event_trigger->LogEntryQualifier ==
+			    log_entry_qualifier)
+				found_match = 1;
+			continue;
+		}
+		found_match = 1;
+		ioc->diag_trigger_active = 1;
+		dTriggerDiagPrintk(ioc,
+				   ioc_info(ioc, "%s: setting diag_trigger_active flag\n",
+					    __func__));
+	}
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+
+	if (!found_match)
+		goto out;
+
+	dTriggerDiagPrintk(ioc,
+			   ioc_info(ioc, "%s: setting diag_trigger_active flag\n",
+				    __func__));
+	memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
+	event_data.trigger_type = MPT3SAS_TRIGGER_EVENT;
+	event_data.u.event.EventValue = event;
+	event_data.u.event.LogEntryQualifier = log_entry_qualifier;
+	mpt3sas_send_trigger_data_event(ioc, &event_data);
+ out:
+	dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: exit\n",
+					 __func__));
+}
+
+/**
+ * mpt3sas_trigger_scsi - SCSI trigger handler
+ * @ioc: per adapter object
+ * @sense_key: ?
+ * @asc: ?
+ * @ascq: ?
+ *
+ */
+void
+mpt3sas_trigger_scsi(struct MPT3SAS_ADAPTER *ioc, u8 sense_key, u8 asc,
+	u8 ascq)
+{
+	struct SL_WH_TRIGGERS_EVENT_DATA_T event_data;
+	struct SL_WH_SCSI_TRIGGER_T *scsi_trigger;
+	int i;
+	unsigned long flags;
+	u8 found_match;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+
+	/* check to see if trace buffers are currently registered */
+	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+	/* check to see if trace buffers are currently released */
+	if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+	dTriggerDiagPrintk(ioc,
+			   ioc_info(ioc, "%s: enter - sense_key = 0x%02x, asc = 0x%02x, ascq = 0x%02x\n",
+				    __func__, sense_key, asc, ascq));
+
+	/* don't send trigger if an trigger is currently active */
+	if (ioc->diag_trigger_active) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		goto out;
+	}
+
+	/* check for the trigger condition */
+	scsi_trigger = ioc->diag_trigger_scsi.SCSITriggerEntry;
+	for (i = 0 , found_match = 0; i < ioc->diag_trigger_scsi.ValidEntries
+	    && !found_match; i++, scsi_trigger++) {
+		if (scsi_trigger->SenseKey != sense_key)
+			continue;
+		if (!(scsi_trigger->ASC == 0xFF || scsi_trigger->ASC == asc))
+			continue;
+		if (!(scsi_trigger->ASCQ == 0xFF || scsi_trigger->ASCQ == ascq))
+			continue;
+		found_match = 1;
+		ioc->diag_trigger_active = 1;
+	}
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+
+	if (!found_match)
+		goto out;
+
+	dTriggerDiagPrintk(ioc,
+			   ioc_info(ioc, "%s: setting diag_trigger_active flag\n",
+				    __func__));
+	memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
+	event_data.trigger_type = MPT3SAS_TRIGGER_SCSI;
+	event_data.u.scsi.SenseKey = sense_key;
+	event_data.u.scsi.ASC = asc;
+	event_data.u.scsi.ASCQ = ascq;
+	mpt3sas_send_trigger_data_event(ioc, &event_data);
+ out:
+	dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: exit\n",
+					 __func__));
+}
+
+/**
+ * mpt3sas_trigger_mpi - MPI trigger handler
+ * @ioc: per adapter object
+ * @ioc_status: ?
+ * @loginfo: ?
+ *
+ */
+void
+mpt3sas_trigger_mpi(struct MPT3SAS_ADAPTER *ioc, u16 ioc_status, u32 loginfo)
+{
+	struct SL_WH_TRIGGERS_EVENT_DATA_T event_data;
+	struct SL_WH_MPI_TRIGGER_T *mpi_trigger;
+	int i;
+	unsigned long flags;
+	u8 found_match;
+
+	spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
+
+	/* check to see if trace buffers are currently registered */
+	if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+	/* check to see if trace buffers are currently released */
+	if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
+	    MPT3_DIAG_BUFFER_IS_RELEASED) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		return;
+	}
+
+	dTriggerDiagPrintk(ioc,
+			   ioc_info(ioc, "%s: enter - ioc_status = 0x%04x, loginfo = 0x%08x\n",
+				    __func__, ioc_status, loginfo));
+
+	/* don't send trigger if an trigger is currently active */
+	if (ioc->diag_trigger_active) {
+		spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+		goto out;
+	}
+
+	/* check for the trigger condition */
+	mpi_trigger = ioc->diag_trigger_mpi.MPITriggerEntry;
+	for (i = 0 , found_match = 0; i < ioc->diag_trigger_mpi.ValidEntries
+	    && !found_match; i++, mpi_trigger++) {
+		if (mpi_trigger->IOCStatus != ioc_status)
+			continue;
+		if (!(mpi_trigger->IocLogInfo == 0xFFFFFFFF ||
+		    mpi_trigger->IocLogInfo == loginfo))
+			continue;
+		found_match = 1;
+		ioc->diag_trigger_active = 1;
+	}
+	spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
+
+	if (!found_match)
+		goto out;
+
+	dTriggerDiagPrintk(ioc,
+			   ioc_info(ioc, "%s: setting diag_trigger_active flag\n",
+				    __func__));
+	memset(&event_data, 0, sizeof(struct SL_WH_TRIGGERS_EVENT_DATA_T));
+	event_data.trigger_type = MPT3SAS_TRIGGER_MPI;
+	event_data.u.mpi.IOCStatus = ioc_status;
+	event_data.u.mpi.IocLogInfo = loginfo;
+	mpt3sas_send_trigger_data_event(ioc, &event_data);
+ out:
+	dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: exit\n",
+					 __func__));
+}
diff --git a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h
new file mode 100644
index 0000000000..405eada266
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h
@@ -0,0 +1,194 @@
+/*
+ * This is the Fusion MPT base driver providing common API layer interface
+ * to set Diagnostic triggers for MPT (Message Passing Technology) based
+ * controllers
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.h
+ * Copyright (C) 2012-2014  LSI Corporation
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+  /* Diagnostic Trigger Configuration Data Structures */
+
+#ifndef MPT3SAS_TRIGGER_DIAG_H_INCLUDED
+#define MPT3SAS_TRIGGER_DIAG_H_INCLUDED
+
+/* limitation on number of entries */
+#define NUM_VALID_ENTRIES               (20)
+
+/* trigger types */
+#define MPT3SAS_TRIGGER_MASTER          (1)
+#define MPT3SAS_TRIGGER_EVENT           (2)
+#define MPT3SAS_TRIGGER_SCSI            (3)
+#define MPT3SAS_TRIGGER_MPI             (4)
+
+/* trigger names */
+#define MASTER_TRIGGER_FILE_NAME        "diag_trigger_master"
+#define EVENT_TRIGGERS_FILE_NAME        "diag_trigger_event"
+#define SCSI_TRIGGERS_FILE_NAME         "diag_trigger_scsi"
+#define MPI_TRIGGER_FILE_NAME           "diag_trigger_mpi"
+
+/* master trigger bitmask */
+#define MASTER_TRIGGER_FW_FAULT         (0x00000001)
+#define MASTER_TRIGGER_ADAPTER_RESET    (0x00000002)
+#define MASTER_TRIGGER_TASK_MANAGMENT   (0x00000004)
+#define MASTER_TRIGGER_DEVICE_REMOVAL   (0x00000008)
+
+/* fake firmware event for trigger */
+#define MPI3_EVENT_DIAGNOSTIC_TRIGGER_FIRED	(0x6E)
+
+/**
+ * MasterTrigger is a single U32 passed to/from sysfs.
+ *
+ * Bit Flags (enables) include:
+ * 1. FW Faults
+ * 2. Adapter Reset issued by driver
+ * 3. TMs
+ * 4. Device Remove Event sent by FW
+ */
+
+struct SL_WH_MASTER_TRIGGER_T {
+	uint32_t MasterData;
+};
+
+/**
+ * struct SL_WH_EVENT_TRIGGER_T -  Definition of an event trigger element
+ * @EventValue: Event Code to trigger on
+ * @LogEntryQualifier: Type of FW event that logged (Log Entry Added Event only)
+ *
+ * Defines an event that should induce a DIAG_TRIGGER driver event if observed.
+ */
+struct SL_WH_EVENT_TRIGGER_T {
+	uint16_t EventValue;
+	uint16_t LogEntryQualifier;
+};
+
+/**
+ * struct SL_WH_EVENT_TRIGGERS_T -  Structure passed to/from sysfs containing a
+ *    list of Event Triggers to be monitored for.
+ * @ValidEntries: Number of _SL_WH_EVENT_TRIGGER_T structures contained in this
+ *    structure.
+ * @EventTriggerEntry: List of Event trigger elements.
+ *
+ * This binary structure is transferred via sysfs to get/set Event Triggers
+ * in the Linux Driver.
+ */
+
+struct SL_WH_EVENT_TRIGGERS_T {
+	uint32_t ValidEntries;
+	struct SL_WH_EVENT_TRIGGER_T EventTriggerEntry[NUM_VALID_ENTRIES];
+};
+
+/**
+ * struct SL_WH_SCSI_TRIGGER_T -  Definition of a SCSI trigger element
+ * @ASCQ: Additional Sense Code Qualifier.  Can be specific or 0xFF for
+ *     wildcard.
+ * @ASC: Additional Sense Code.  Can be specific or 0xFF for wildcard
+ * @SenseKey: SCSI Sense Key
+ *
+ * Defines a sense key (single or many variants) that should induce a
+ * DIAG_TRIGGER driver event if observed.
+ */
+struct SL_WH_SCSI_TRIGGER_T {
+	U8 ASCQ;
+	U8 ASC;
+	U8 SenseKey;
+	U8 Reserved;
+};
+
+/**
+ * struct SL_WH_SCSI_TRIGGERS_T -  Structure passed to/from sysfs containing a
+ *    list of SCSI sense codes that should trigger a DIAG_SERVICE event when
+ *    observed.
+ * @ValidEntries: Number of _SL_WH_SCSI_TRIGGER_T structures contained in this
+ *    structure.
+ * @SCSITriggerEntry: List of SCSI Sense Code trigger elements.
+ *
+ * This binary structure is transferred via sysfs to get/set SCSI Sense Code
+ * Triggers in the Linux Driver.
+ */
+struct SL_WH_SCSI_TRIGGERS_T {
+	uint32_t ValidEntries;
+	struct SL_WH_SCSI_TRIGGER_T SCSITriggerEntry[NUM_VALID_ENTRIES];
+};
+
+/**
+ * struct SL_WH_MPI_TRIGGER_T -  Definition of an MPI trigger element
+ * @IOCStatus: MPI IOCStatus
+ * @IocLogInfo: MPI IocLogInfo.  Can be specific or 0xFFFFFFFF for wildcard
+ *
+ * Defines a MPI IOCStatus/IocLogInfo pair that should induce a DIAG_TRIGGER
+ * driver event if observed.
+ */
+struct SL_WH_MPI_TRIGGER_T {
+	uint16_t IOCStatus;
+	uint16_t Reserved;
+	uint32_t IocLogInfo;
+};
+
+/**
+ * struct SL_WH_MPI_TRIGGERS_T -  Structure passed to/from sysfs containing a
+ *    list of MPI IOCStatus/IocLogInfo pairs that should trigger a DIAG_SERVICE
+ *    event when observed.
+ * @ValidEntries: Number of _SL_WH_MPI_TRIGGER_T structures contained in this
+ *    structure.
+ * @MPITriggerEntry: List of MPI IOCStatus/IocLogInfo trigger elements.
+ *
+ * This binary structure is transferred via sysfs to get/set MPI Error Triggers
+ * in the Linux Driver.
+ */
+struct SL_WH_MPI_TRIGGERS_T {
+	uint32_t ValidEntries;
+	struct SL_WH_MPI_TRIGGER_T MPITriggerEntry[NUM_VALID_ENTRIES];
+};
+
+/**
+ * struct SL_WH_TRIGGERS_EVENT_DATA_T -  event data for trigger
+ * @trigger_type: trigger type (see MPT3SAS_TRIGGER_XXXX)
+ * @u: trigger condition that caused trigger to be sent
+ */
+struct SL_WH_TRIGGERS_EVENT_DATA_T {
+	uint32_t trigger_type;
+	union {
+		struct SL_WH_MASTER_TRIGGER_T master;
+		struct SL_WH_EVENT_TRIGGER_T event;
+		struct SL_WH_SCSI_TRIGGER_T scsi;
+		struct SL_WH_MPI_TRIGGER_T mpi;
+	} u;
+};
+#endif /* MPT3SAS_TRIGGER_DIAG_H_INCLUDED */
diff --git a/drivers/scsi/mpt3sas/mpt3sas_trigger_pages.h b/drivers/scsi/mpt3sas/mpt3sas_trigger_pages.h
new file mode 100644
index 0000000000..5f3328f011
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_trigger_pages.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+/*
+ * This is the Fusion MPT base driver providing common API layer interface
+ * to store diag trigger values into persistent driver triggers pages
+ * for MPT (Message Passing Technology) based controllers.
+ *
+ * Copyright (C) 2020  Broadcom Inc.
+ *
+ * Authors: Broadcom Inc.
+ * Sreekanth Reddy  <sreekanth.reddy@broadcom.com>
+ *
+ * Send feedback to : MPT-FusionLinux.pdl@broadcom.com)
+ */
+
+#include "mpi/mpi2_cnfg.h"
+
+#ifndef MPI2_TRIGGER_PAGES_H
+#define MPI2_TRIGGER_PAGES_H
+
+#define MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER    (0xE0)
+#define MPI26_DRIVER_TRIGGER_PAGE0_PAGEVERSION               (0x01)
+typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_0 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER	Header;	/* 0x00  */
+	U16	TriggerFlags;		/* 0x08  */
+	U16	Reserved0xA;		/* 0x0A */
+	U32	Reserved0xC[61];	/* 0x0C */
+} _MPI26_CONFIG_PAGE_DRIVER_TIGGER_0, Mpi26DriverTriggerPage0_t;
+
+/* Trigger Flags */
+#define  MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID       (0x0001)
+#define  MPI26_DRIVER_TRIGGER0_FLAG_MPI_EVENT_TRIGGER_VALID    (0x0002)
+#define  MPI26_DRIVER_TRIGGER0_FLAG_SCSI_SENSE_TRIGGER_VALID   (0x0004)
+#define  MPI26_DRIVER_TRIGGER0_FLAG_LOGINFO_TRIGGER_VALID      (0x0008)
+
+#define MPI26_DRIVER_TRIGGER_PAGE1_PAGEVERSION               (0x01)
+typedef struct _MPI26_DRIVER_MASTER_TIGGER_ENTRY {
+	U32	MasterTriggerFlags;
+} MPI26_DRIVER_MASTER_TIGGER_ENTRY;
+
+#define MPI26_MAX_MASTER_TRIGGERS                                   (1)
+typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_1 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER	Header;	/* 0x00 */
+	U16	NumMasterTrigger;	/* 0x08 */
+	U16	Reserved0xA;		/* 0x0A */
+	MPI26_DRIVER_MASTER_TIGGER_ENTRY MasterTriggers[MPI26_MAX_MASTER_TRIGGERS];	/* 0x0C */
+} MPI26_CONFIG_PAGE_DRIVER_TIGGER_1, Mpi26DriverTriggerPage1_t;
+
+#define MPI26_DRIVER_TRIGGER_PAGE2_PAGEVERSION               (0x01)
+typedef struct _MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY {
+	U16	MPIEventCode;		/* 0x00 */
+	U16	MPIEventCodeSpecific;	/* 0x02 */
+} MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY;
+
+#define MPI26_MAX_MPI_EVENT_TRIGGERS                            (20)
+typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_2 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER        Header;	/* 0x00  */
+	U16	NumMPIEventTrigger;     /* 0x08  */
+	U16	Reserved0xA;		/* 0x0A */
+	MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY MPIEventTriggers[MPI26_MAX_MPI_EVENT_TRIGGERS]; /* 0x0C */
+} MPI26_CONFIG_PAGE_DRIVER_TIGGER_2, Mpi26DriverTriggerPage2_t;
+
+#define MPI26_DRIVER_TRIGGER_PAGE3_PAGEVERSION               (0x01)
+typedef struct _MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY {
+	U8     ASCQ;		/* 0x00 */
+	U8     ASC;		/* 0x01 */
+	U8     SenseKey;	/* 0x02 */
+	U8     Reserved;	/* 0x03 */
+} MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY;
+
+#define MPI26_MAX_SCSI_SENSE_TRIGGERS                            (20)
+typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_3 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER	Header;	/* 0x00  */
+	U16	NumSCSISenseTrigger;			/* 0x08  */
+	U16	Reserved0xA;				/* 0x0A */
+	MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY SCSISenseTriggers[MPI26_MAX_SCSI_SENSE_TRIGGERS];	/* 0x0C */
+} MPI26_CONFIG_PAGE_DRIVER_TIGGER_3, Mpi26DriverTriggerPage3_t;
+
+#define MPI26_DRIVER_TRIGGER_PAGE4_PAGEVERSION               (0x01)
+typedef struct _MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY {
+	U16        IOCStatus;      /* 0x00 */
+	U16        Reserved;       /* 0x02 */
+	U32        LogInfo;        /* 0x04 */
+} MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY;
+
+#define MPI26_MAX_LOGINFO_TRIGGERS                            (20)
+typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_4 {
+	MPI2_CONFIG_EXTENDED_PAGE_HEADER	Header;	/* 0x00  */
+	U16	NumIOCStatusLogInfoTrigger;		/* 0x08  */
+	U16	Reserved0xA;				/* 0x0A */
+	MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY IOCStatusLoginfoTriggers[MPI26_MAX_LOGINFO_TRIGGERS];	/* 0x0C */
+} MPI26_CONFIG_PAGE_DRIVER_TIGGER_4, Mpi26DriverTriggerPage4_t;
+
+#endif
diff --git a/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c b/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
new file mode 100644
index 0000000000..cc07ba41f5
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
@@ -0,0 +1,299 @@
+/*
+ * Scsi Host Layer for MPT (Message Passing Technology) based controllers
+ *
+ * Copyright (C) 2012-2014  LSI Corporation
+ * Copyright (C) 2013-2015 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <asm/unaligned.h>
+
+#include "mpt3sas_base.h"
+
+/**
+ * _warpdrive_disable_ddio - Disable direct I/O for all the volumes
+ * @ioc: per adapter object
+ */
+static void
+_warpdrive_disable_ddio(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2RaidVolPage1_t vol_pg1;
+	Mpi2ConfigReply_t mpi_reply;
+	struct _raid_device *raid_device;
+	u16 handle;
+	u16 ioc_status;
+	unsigned long flags;
+
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+	    &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+			break;
+		handle = le16_to_cpu(vol_pg1.DevHandle);
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
+		if (raid_device)
+			raid_device->direct_io_enabled = 0;
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+	}
+	return;
+}
+
+
+/**
+ * mpt3sas_get_num_volumes - Get number of volumes in the ioc
+ * @ioc: per adapter object
+ */
+u8
+mpt3sas_get_num_volumes(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2RaidVolPage1_t vol_pg1;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 handle;
+	u8 vol_cnt = 0;
+	u16 ioc_status;
+
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+	    &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+			break;
+		vol_cnt++;
+		handle = le16_to_cpu(vol_pg1.DevHandle);
+	}
+	return vol_cnt;
+}
+
+
+/**
+ * mpt3sas_init_warpdrive_properties - Set properties for warpdrive direct I/O.
+ * @ioc: per adapter object
+ * @raid_device: the raid_device object
+ */
+void
+mpt3sas_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc,
+	struct _raid_device *raid_device)
+{
+	Mpi2RaidVolPage0_t *vol_pg0;
+	Mpi2RaidPhysDiskPage0_t pd_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 sz;
+	u8 num_pds, count;
+	unsigned long stripe_sz, block_sz;
+	u8 stripe_exp, block_exp;
+	u64 dev_max_lba;
+
+	if (!ioc->is_warpdrive)
+		return;
+
+	if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_EXPOSE_ALL_DISKS) {
+		ioc_info(ioc, "WarpDrive : Direct IO is disabled globally as drives are exposed\n");
+		return;
+	}
+	if (mpt3sas_get_num_volumes(ioc) > 1) {
+		_warpdrive_disable_ddio(ioc);
+		ioc_info(ioc, "WarpDrive : Direct IO is disabled globally as number of drives > 1\n");
+		return;
+	}
+	if ((mpt3sas_config_get_number_pds(ioc, raid_device->handle,
+	    &num_pds)) || !num_pds) {
+		ioc_info(ioc, "WarpDrive : Direct IO is disabled Failure in computing number of drives\n");
+		return;
+	}
+
+	sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
+	    sizeof(Mpi2RaidVol0PhysDisk_t));
+	vol_pg0 = kzalloc(sz, GFP_KERNEL);
+	if (!vol_pg0) {
+		ioc_info(ioc, "WarpDrive : Direct IO is disabled Memory allocation failure for RVPG0\n");
+		return;
+	}
+
+	if ((mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
+	     MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
+		ioc_info(ioc, "WarpDrive : Direct IO is disabled Failure in retrieving RVPG0\n");
+		kfree(vol_pg0);
+		return;
+	}
+
+	/*
+	 * WARPDRIVE:If number of physical disks in a volume exceeds the max pds
+	 * assumed for WARPDRIVE, disable direct I/O
+	 */
+	if (num_pds > MPT_MAX_WARPDRIVE_PDS) {
+		ioc_warn(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x): num_mem=%d, max_mem_allowed=%d\n",
+			 raid_device->handle, num_pds, MPT_MAX_WARPDRIVE_PDS);
+		kfree(vol_pg0);
+		return;
+	}
+	for (count = 0; count < num_pds; count++) {
+		if (mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
+		    &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM,
+		    vol_pg0->PhysDisk[count].PhysDiskNum) ||
+		    le16_to_cpu(pd_pg0.DevHandle) ==
+		    MPT3SAS_INVALID_DEVICE_HANDLE) {
+			ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x) member handle retrieval failed for member number=%d\n",
+				 raid_device->handle,
+				 vol_pg0->PhysDisk[count].PhysDiskNum);
+			goto out_error;
+		}
+		/* Disable direct I/O if member drive lba exceeds 4 bytes */
+		dev_max_lba = le64_to_cpu(pd_pg0.DeviceMaxLBA);
+		if (dev_max_lba >> 32) {
+			ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x) member handle (0x%04x) unsupported max lba 0x%016llx\n",
+				 raid_device->handle,
+				 le16_to_cpu(pd_pg0.DevHandle),
+				 (u64)dev_max_lba);
+			goto out_error;
+		}
+
+		raid_device->pd_handle[count] = le16_to_cpu(pd_pg0.DevHandle);
+	}
+
+	/*
+	 * Assumption for WD: Direct I/O is not supported if the volume is
+	 * not RAID0
+	 */
+	if (raid_device->volume_type != MPI2_RAID_VOL_TYPE_RAID0) {
+		ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x): type=%d, s_sz=%uK, blk_size=%u\n",
+			 raid_device->handle, raid_device->volume_type,
+			 (le32_to_cpu(vol_pg0->StripeSize) *
+			  le16_to_cpu(vol_pg0->BlockSize)) / 1024,
+			 le16_to_cpu(vol_pg0->BlockSize));
+		goto out_error;
+	}
+
+	stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
+	stripe_exp = find_first_bit(&stripe_sz, 32);
+	if (stripe_exp == 32) {
+		ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x) invalid stripe sz %uK\n",
+			 raid_device->handle,
+			 (le32_to_cpu(vol_pg0->StripeSize) *
+			  le16_to_cpu(vol_pg0->BlockSize)) / 1024);
+		goto out_error;
+	}
+	raid_device->stripe_exponent = stripe_exp;
+	block_sz = le16_to_cpu(vol_pg0->BlockSize);
+	block_exp = find_first_bit(&block_sz, 16);
+	if (block_exp == 16) {
+		ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x) invalid block sz %u\n",
+			 raid_device->handle, le16_to_cpu(vol_pg0->BlockSize));
+		goto out_error;
+	}
+	raid_device->block_exponent = block_exp;
+	raid_device->direct_io_enabled = 1;
+
+	ioc_info(ioc, "WarpDrive : Direct IO is Enabled for the drive with handle(0x%04x)\n",
+		 raid_device->handle);
+	/*
+	 * WARPDRIVE: Though the following fields are not used for direct IO,
+	 * stored for future purpose:
+	 */
+	raid_device->max_lba = le64_to_cpu(vol_pg0->MaxLBA);
+	raid_device->stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
+	raid_device->block_sz = le16_to_cpu(vol_pg0->BlockSize);
+
+
+	kfree(vol_pg0);
+	return;
+
+out_error:
+	raid_device->direct_io_enabled = 0;
+	for (count = 0; count < num_pds; count++)
+		raid_device->pd_handle[count] = 0;
+	kfree(vol_pg0);
+	return;
+}
+
+/**
+ * mpt3sas_setup_direct_io - setup MPI request for WARPDRIVE Direct I/O
+ * @ioc: per adapter object
+ * @scmd: pointer to scsi command object
+ * @raid_device: pointer to raid device data structure
+ * @mpi_request: pointer to the SCSI_IO reqest message frame
+ */
+void
+mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
+	struct _raid_device *raid_device, Mpi25SCSIIORequest_t *mpi_request)
+{
+	sector_t v_lba, p_lba, stripe_off, column, io_size;
+	u32 stripe_sz, stripe_exp;
+	u8 num_pds, cmd = scmd->cmnd[0];
+	struct scsiio_tracker *st = scsi_cmd_priv(scmd);
+
+	if (cmd != READ_10 && cmd != WRITE_10 &&
+	    cmd != READ_16 && cmd != WRITE_16)
+		return;
+
+	if (cmd == READ_10 || cmd == WRITE_10)
+		v_lba = get_unaligned_be32(&mpi_request->CDB.CDB32[2]);
+	else
+		v_lba = get_unaligned_be64(&mpi_request->CDB.CDB32[2]);
+
+	io_size = scsi_bufflen(scmd) >> raid_device->block_exponent;
+
+	if (v_lba + io_size - 1 > raid_device->max_lba)
+		return;
+
+	stripe_sz = raid_device->stripe_sz;
+	stripe_exp = raid_device->stripe_exponent;
+	stripe_off = v_lba & (stripe_sz - 1);
+
+	/* Return unless IO falls within a stripe */
+	if (stripe_off + io_size > stripe_sz)
+		return;
+
+	num_pds = raid_device->num_pds;
+	p_lba = v_lba >> stripe_exp;
+	column = sector_div(p_lba, num_pds);
+	p_lba = (p_lba << stripe_exp) + stripe_off;
+	mpi_request->DevHandle = cpu_to_le16(raid_device->pd_handle[column]);
+
+	if (cmd == READ_10 || cmd == WRITE_10)
+		put_unaligned_be32(lower_32_bits(p_lba),
+				   &mpi_request->CDB.CDB32[2]);
+	else
+		put_unaligned_be64(p_lba, &mpi_request->CDB.CDB32[2]);
+
+	st->direct_io = 1;
+}