Merging upstream version 6.9.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

5 files changed, 159 insertions, 62 deletions

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index b8120ca93c..86f553c617 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -5481,7 +5481,7 @@ mpt3sas_atto_validate_nvram(struct MPT3SAS_ADAPTER *ioc,
  * mpt3sas_atto_get_sas_addr - get the ATTO SAS address from mfg page 1
  *
  * @ioc : per adapter object
- * @*sas_addr : return sas address
+ * @sas_addr : return sas address
  * Return: 0 for success, non-zero for failure.
  */
 static int
@@ -7916,26 +7916,22 @@ mpt3sas_base_validate_event_type(struct MPT3SAS_ADAPTER *ioc, u32 *event_type)
 }
 
 /**
- * _base_diag_reset - the "big hammer" start of day reset
- * @ioc: per adapter object
- *
- * Return: 0 for success, non-zero for failure.
- */
-static int
-_base_diag_reset(struct MPT3SAS_ADAPTER *ioc)
-{
-	u32 host_diagnostic;
-	u32 ioc_state;
-	u32 count;
-	u32 hcb_size;
-
-	ioc_info(ioc, "sending diag reset !!\n");
-
-	pci_cfg_access_lock(ioc->pdev);
+* mpt3sas_base_unlock_and_get_host_diagnostic- enable Host Diagnostic Register writes
+* @ioc: per adapter object
+* @host_diagnostic: host diagnostic register content
+*
+* Return: 0 for success, non-zero for failure.
+*/
 
-	drsprintk(ioc, ioc_info(ioc, "clear interrupts\n"));
+int
+mpt3sas_base_unlock_and_get_host_diagnostic(struct MPT3SAS_ADAPTER *ioc,
+	u32 *host_diagnostic)
+{
 
+	u32 count;
+	*host_diagnostic = 0;
 	count = 0;
+
 	do {
 		/* Write magic sequence to WriteSequence register
 		 * Loop until in diagnostic mode
@@ -7954,30 +7950,67 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc)
 
 		if (count++ > 20) {
 			ioc_info(ioc,
-			    "Stop writing magic sequence after 20 retries\n");
+				    "Stop writing magic sequence after 20 retries\n");
 			_base_dump_reg_set(ioc);
-			goto out;
+			return -EFAULT;
 		}
 
-		host_diagnostic = ioc->base_readl_ext_retry(&ioc->chip->HostDiagnostic);
+		*host_diagnostic = ioc->base_readl_ext_retry(&ioc->chip->HostDiagnostic);
 		drsprintk(ioc,
-			  ioc_info(ioc, "wrote magic sequence: count(%d), host_diagnostic(0x%08x)\n",
-				   count, host_diagnostic));
+			     ioc_info(ioc, "wrote magic sequence: count(%d), host_diagnostic(0x%08x)\n",
+				     count, *host_diagnostic));
 
-	} while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0);
+	} while ((*host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0);
+	return 0;
+}
 
-	hcb_size = ioc->base_readl(&ioc->chip->HCBSize);
+/**
+ * mpt3sas_base_lock_host_diagnostic: Disable Host Diagnostic Register writes
+ * @ioc: per adapter object
+ */
 
+void
+mpt3sas_base_lock_host_diagnostic(struct MPT3SAS_ADAPTER *ioc)
+{
+	drsprintk(ioc, ioc_info(ioc, "disable writes to the diagnostic register\n"));
+	writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
+}
+
+/**
+ * _base_diag_reset - the "big hammer" start of day reset
+ * @ioc: per adapter object
+ *
+ * Return: 0 for success, non-zero for failure.
+ */
+static int
+_base_diag_reset(struct MPT3SAS_ADAPTER *ioc)
+{
+	u32 host_diagnostic;
+	u32 ioc_state;
+	u32 count;
+	u32 hcb_size;
+
+	ioc_info(ioc, "sending diag reset !!\n");
+
+	pci_cfg_access_lock(ioc->pdev);
+
+	drsprintk(ioc, ioc_info(ioc, "clear interrupts\n"));
+
+	mutex_lock(&ioc->hostdiag_unlock_mutex);
+	if (mpt3sas_base_unlock_and_get_host_diagnostic(ioc, &host_diagnostic))
+		goto out;
+
+	hcb_size = ioc->base_readl(&ioc->chip->HCBSize);
 	drsprintk(ioc, ioc_info(ioc, "diag reset: issued\n"));
 	writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER,
 	     &ioc->chip->HostDiagnostic);
 
-	/*This delay allows the chip PCIe hardware time to finish reset tasks*/
+	/* This delay allows the chip PCIe hardware time to finish reset tasks */
 	msleep(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
 
 	/* Approximately 300 second max wait */
 	for (count = 0; count < (300000000 /
-		MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) {
+	    MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) {
 
 		host_diagnostic = ioc->base_readl_ext_retry(&ioc->chip->HostDiagnostic);
 
@@ -7990,13 +8023,15 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc)
 		if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER))
 			break;
 
-		msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC / 1000);
+		/* Wait to pass the second read delay window */
+		msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC/1000);
 	}
 
 	if (host_diagnostic & MPI2_DIAG_HCB_MODE) {
 
 		drsprintk(ioc,
-			  ioc_info(ioc, "restart the adapter assuming the HCB Address points to good F/W\n"));
+			ioc_info(ioc, "restart the adapter assuming the\n"
+					"HCB Address points to good F/W\n"));
 		host_diagnostic &= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK;
 		host_diagnostic |= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW;
 		writel(host_diagnostic, &ioc->chip->HostDiagnostic);
@@ -8010,9 +8045,8 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc)
 	writel(host_diagnostic & ~MPI2_DIAG_HOLD_IOC_RESET,
 	    &ioc->chip->HostDiagnostic);
 
-	drsprintk(ioc,
-		  ioc_info(ioc, "disable writes to the diagnostic register\n"));
-	writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
+	mpt3sas_base_lock_host_diagnostic(ioc);
+	mutex_unlock(&ioc->hostdiag_unlock_mutex);
 
 	drsprintk(ioc, ioc_info(ioc, "Wait for FW to go to the READY state\n"));
 	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20);
@@ -8030,6 +8064,7 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc)
  out:
 	pci_cfg_access_unlock(ioc->pdev);
 	ioc_err(ioc, "diag reset: FAILED\n");
+	mutex_unlock(&ioc->hostdiag_unlock_mutex);
 	return -EFAULT;
 }
 
@@ -8477,6 +8512,12 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 	ioc->pd_handles_sz = (ioc->facts.MaxDevHandle / 8);
 	if (ioc->facts.MaxDevHandle % 8)
 		ioc->pd_handles_sz++;
+	/*
+	 * pd_handles_sz should have, at least, the minimal room for
+	 * set_bit()/test_bit(), otherwise out-of-memory touch may occur.
+	 */
+	ioc->pd_handles_sz = ALIGN(ioc->pd_handles_sz, sizeof(unsigned long));
+
 	ioc->pd_handles = kzalloc(ioc->pd_handles_sz,
 	    GFP_KERNEL);
 	if (!ioc->pd_handles) {
@@ -8494,6 +8535,13 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 	ioc->pend_os_device_add_sz = (ioc->facts.MaxDevHandle / 8);
 	if (ioc->facts.MaxDevHandle % 8)
 		ioc->pend_os_device_add_sz++;
+
+	/*
+	 * pend_os_device_add_sz should have, at least, the minimal room for
+	 * set_bit()/test_bit(), otherwise out-of-memory may occur.
+	 */
+	ioc->pend_os_device_add_sz = ALIGN(ioc->pend_os_device_add_sz,
+					   sizeof(unsigned long));
 	ioc->pend_os_device_add = kzalloc(ioc->pend_os_device_add_sz,
 	    GFP_KERNEL);
 	if (!ioc->pend_os_device_add) {
@@ -8785,6 +8833,12 @@ _base_check_ioc_facts_changes(struct MPT3SAS_ADAPTER *ioc)
 		if (ioc->facts.MaxDevHandle % 8)
 			pd_handles_sz++;
 
+		/*
+		 * pd_handles should have, at least, the minimal room for
+		 * set_bit()/test_bit(), otherwise out-of-memory touch may
+		 * occur.
+		 */
+		pd_handles_sz = ALIGN(pd_handles_sz, sizeof(unsigned long));
 		pd_handles = krealloc(ioc->pd_handles, pd_handles_sz,
 		    GFP_KERNEL);
 		if (!pd_handles) {
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 6d0bc8c667..fe1e96fda2 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -77,8 +77,8 @@
 #define MPT3SAS_DRIVER_NAME		"mpt3sas"
 #define MPT3SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>"
 #define MPT3SAS_DESCRIPTION	"LSI MPT Fusion SAS 3.0 Device Driver"
-#define MPT3SAS_DRIVER_VERSION		"43.100.00.00"
-#define MPT3SAS_MAJOR_VERSION		43
+#define MPT3SAS_DRIVER_VERSION		"48.100.00.00"
+#define MPT3SAS_MAJOR_VERSION		48
 #define MPT3SAS_MINOR_VERSION		100
 #define MPT3SAS_BUILD_VERSION		0
 #define MPT3SAS_RELEASE_VERSION	00
@@ -1366,6 +1366,7 @@ struct MPT3SAS_ADAPTER {
 	u8		got_task_abort_from_ioctl;
 
 	struct mutex	reset_in_progress_mutex;
+	struct mutex    hostdiag_unlock_mutex;
 	spinlock_t	ioc_reset_in_progress_lock;
 	u8		ioc_link_reset_in_progress;
 
@@ -1790,6 +1791,9 @@ void mpt3sas_base_disable_msix(struct MPT3SAS_ADAPTER *ioc);
 int mpt3sas_blk_mq_poll(struct Scsi_Host *shost, unsigned int queue_num);
 void mpt3sas_base_pause_mq_polling(struct MPT3SAS_ADAPTER *ioc);
 void mpt3sas_base_resume_mq_polling(struct MPT3SAS_ADAPTER *ioc);
+int mpt3sas_base_unlock_and_get_host_diagnostic(struct MPT3SAS_ADAPTER *ioc,
+	u32 *host_diagnostic);
+void mpt3sas_base_lock_host_diagnostic(struct MPT3SAS_ADAPTER *ioc);
 
 /* scsih shared API */
 struct scsi_cmnd *mpt3sas_scsih_scsi_lookup_get(struct MPT3SAS_ADAPTER *ioc,
@@ -2044,9 +2048,6 @@ void
 mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
 	struct _raid_device *raid_device, Mpi25SCSIIORequest_t *mpi_request);
 
-/* NCQ Prio Handling Check */
-bool scsih_ncq_prio_supp(struct scsi_device *sdev);
-
 void mpt3sas_setup_debugfs(struct MPT3SAS_ADAPTER *ioc);
 void mpt3sas_destroy_debugfs(struct MPT3SAS_ADAPTER *ioc);
 void mpt3sas_init_debugfs(void);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index 147cb7088d..87784c9624 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -2543,6 +2543,56 @@ out:
 	return 0;
 }
 
+/**
+ * _ctl_enable_diag_sbr_reload - enable sbr reload bit
+ * @ioc: per adapter object
+ * @arg: user space buffer containing ioctl content
+ *
+ * Enable the SBR reload bit
+ */
+static int
+_ctl_enable_diag_sbr_reload(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+	u32 ioc_state, host_diagnostic;
+
+	if (ioc->shost_recovery ||
+	    ioc->pci_error_recovery || ioc->is_driver_loading ||
+	    ioc->remove_host)
+		return -EAGAIN;
+
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+
+	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL)
+		return -EFAULT;
+
+	host_diagnostic = ioc->base_readl(&ioc->chip->HostDiagnostic);
+
+	if (host_diagnostic & MPI2_DIAG_SBR_RELOAD)
+		return 0;
+
+	if (mutex_trylock(&ioc->hostdiag_unlock_mutex)) {
+		if (mpt3sas_base_unlock_and_get_host_diagnostic(ioc, &host_diagnostic)) {
+			mutex_unlock(&ioc->hostdiag_unlock_mutex);
+				return -EFAULT;
+		}
+	} else
+		return -EAGAIN;
+
+	host_diagnostic |= MPI2_DIAG_SBR_RELOAD;
+	writel(host_diagnostic, &ioc->chip->HostDiagnostic);
+	host_diagnostic = ioc->base_readl(&ioc->chip->HostDiagnostic);
+	mpt3sas_base_lock_host_diagnostic(ioc);
+	mutex_unlock(&ioc->hostdiag_unlock_mutex);
+
+	if (!(host_diagnostic & MPI2_DIAG_SBR_RELOAD)) {
+		ioc_err(ioc, "%s: Failed to set Diag SBR Reload Bit\n", __func__);
+		return -EFAULT;
+	}
+
+	ioc_info(ioc, "%s: Successfully set the Diag SBR Reload Bit\n", __func__);
+	return 0;
+}
+
 #ifdef CONFIG_COMPAT
 /**
  * _ctl_compat_mpt_command - convert 32bit pointers to 64bit.
@@ -2719,6 +2769,10 @@ _ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg,
 		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_addnl_diag_query))
 			ret = _ctl_addnl_diag_query(ioc, arg);
 		break;
+	case MPT3ENABLEDIAGSBRRELOAD:
+		if (_IOC_SIZE(cmd) == sizeof(struct mpt3_enable_diag_sbr_reload))
+			ret = _ctl_enable_diag_sbr_reload(ioc, arg);
+		break;
 	default:
 		dctlprintk(ioc,
 			   ioc_info(ioc, "unsupported ioctl opcode(0x%08x)\n",
@@ -4034,7 +4088,7 @@ sas_ncq_prio_supported_show(struct device *dev,
 {
 	struct scsi_device *sdev = to_scsi_device(dev);
 
-	return sysfs_emit(buf, "%d\n", scsih_ncq_prio_supp(sdev));
+	return sysfs_emit(buf, "%d\n", sas_ata_ncq_prio_supported(sdev));
 }
 static DEVICE_ATTR_RO(sas_ncq_prio_supported);
 
@@ -4069,7 +4123,7 @@ sas_ncq_prio_enable_store(struct device *dev,
 	if (kstrtobool(buf, &ncq_prio_enable))
 		return -EINVAL;
 
-	if (!scsih_ncq_prio_supp(sdev))
+	if (!sas_ata_ncq_prio_supported(sdev))
 		return -EINVAL;
 
 	sas_device_priv_data->ncq_prio_enable = ncq_prio_enable;
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.h b/drivers/scsi/mpt3sas/mpt3sas_ctl.h
index 8f6ffb4026..171709e910 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.h
@@ -98,6 +98,8 @@
 	struct mpt3_diag_read_buffer)
 #define MPT3ADDNLDIAGQUERY _IOWR(MPT3_MAGIC_NUMBER, 32, \
 	struct mpt3_addnl_diag_query)
+#define MPT3ENABLEDIAGSBRRELOAD _IOWR(MPT3_MAGIC_NUMBER, 33, \
+	struct mpt3_enable_diag_sbr_reload)
 
 /* Trace Buffer default UniqueId */
 #define MPT2DIAGBUFFUNIQUEID (0x07075900)
@@ -448,4 +450,12 @@ struct mpt3_addnl_diag_query {
 	uint32_t reserved2[2];
 };
 
+/**
+ * struct mpt3_enable_diag_sbr_reload - enable sbr reload
+ * @hdr - generic header
+ */
+struct mpt3_enable_diag_sbr_reload {
+	struct mpt3_ioctl_header hdr;
+};
+
 #endif /* MPT3SAS_CTL_H_INCLUDED */
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 51b5788da0..7e923e0249 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -12240,6 +12240,7 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* misc semaphores and spin locks */
 	mutex_init(&ioc->reset_in_progress_mutex);
+	mutex_init(&ioc->hostdiag_unlock_mutex);
 	/* initializing pci_access_mutex lock */
 	mutex_init(&ioc->pci_access_mutex);
 	spin_lock_init(&ioc->ioc_reset_in_progress_lock);
@@ -12572,29 +12573,6 @@ scsih_pci_mmio_enabled(struct pci_dev *pdev)
 	return PCI_ERS_RESULT_RECOVERED;
 }
 
-/**
- * scsih_ncq_prio_supp - Check for NCQ command priority support
- * @sdev: scsi device struct
- *
- * This is called when a user indicates they would like to enable
- * ncq command priorities. This works only on SATA devices.
- */
-bool scsih_ncq_prio_supp(struct scsi_device *sdev)
-{
-	struct scsi_vpd *vpd;
-	bool ncq_prio_supp = false;
-
-	rcu_read_lock();
-	vpd = rcu_dereference(sdev->vpd_pg89);
-	if (!vpd || vpd->len < 214)
-		goto out;
-
-	ncq_prio_supp = (vpd->data[213] >> 4) & 1;
-out:
-	rcu_read_unlock();
-
-	return ncq_prio_supp;
-}
 /*
  * The pci device ids are defined in mpi/mpi2_cnfg.h.
  */