Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 958 insertions, 0 deletions

diff --git a/drivers/scsi/myrb.h b/drivers/scsi/myrb.h
new file mode 100644
index 0000000000..fb8eacfcee
--- /dev/null
+++ b/drivers/scsi/myrb.h
@@ -0,0 +1,958 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
+ *
+ * Copyright 2017 Hannes Reinecke, SUSE Linux GmbH <hare@suse.com>
+ *
+ * Based on the original DAC960 driver,
+ * Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
+ * Portions Copyright 2002 by Mylex (An IBM Business Unit)
+ *
+ */
+
+#ifndef MYRB_H
+#define MYRB_H
+
+#define MYRB_MAX_LDEVS			32
+#define MYRB_MAX_CHANNELS		3
+#define MYRB_MAX_TARGETS		16
+#define MYRB_MAX_PHYSICAL_DEVICES	45
+#define MYRB_SCATTER_GATHER_LIMIT	32
+#define MYRB_CMD_MBOX_COUNT		256
+#define MYRB_STAT_MBOX_COUNT		1024
+
+#define MYRB_BLKSIZE_BITS		9
+#define MYRB_MAILBOX_TIMEOUT		1000000
+
+#define MYRB_DCMD_TAG			1
+#define MYRB_MCMD_TAG			2
+
+#define MYRB_PRIMARY_MONITOR_INTERVAL (10 * HZ)
+#define MYRB_SECONDARY_MONITOR_INTERVAL (60 * HZ)
+
+/*
+ * DAC960 V1 Firmware Command Opcodes.
+ */
+enum myrb_cmd_opcode {
+	/* I/O Commands */
+	MYRB_CMD_READ_EXTENDED =	0x33,
+	MYRB_CMD_WRITE_EXTENDED =	0x34,
+	MYRB_CMD_READAHEAD_EXTENDED =	0x35,
+	MYRB_CMD_READ_EXTENDED_SG =	0xB3,
+	MYRB_CMD_WRITE_EXTENDED_SG =	0xB4,
+	MYRB_CMD_READ =			0x36,
+	MYRB_CMD_READ_SG =		0xB6,
+	MYRB_CMD_WRITE =		0x37,
+	MYRB_CMD_WRITE_SG =		0xB7,
+	MYRB_CMD_DCDB =			0x04,
+	MYRB_CMD_DCDB_SG =		0x84,
+	MYRB_CMD_FLUSH =		0x0A,
+	/* Controller Status Related Commands */
+	MYRB_CMD_ENQUIRY =		0x53,
+	MYRB_CMD_ENQUIRY2 =		0x1C,
+	MYRB_CMD_GET_LDRV_ELEMENT =	0x55,
+	MYRB_CMD_GET_LDEV_INFO =	0x19,
+	MYRB_CMD_IOPORTREAD =		0x39,
+	MYRB_CMD_IOPORTWRITE =		0x3A,
+	MYRB_CMD_GET_SD_STATS =		0x3E,
+	MYRB_CMD_GET_PD_STATS =		0x3F,
+	MYRB_CMD_EVENT_LOG_OPERATION =	0x72,
+	/* Device Related Commands */
+	MYRB_CMD_START_DEVICE =		0x10,
+	MYRB_CMD_GET_DEVICE_STATE =	0x50,
+	MYRB_CMD_STOP_CHANNEL =		0x13,
+	MYRB_CMD_START_CHANNEL =	0x12,
+	MYRB_CMD_RESET_CHANNEL =	0x1A,
+	/* Commands Associated with Data Consistency and Errors */
+	MYRB_CMD_REBUILD =		0x09,
+	MYRB_CMD_REBUILD_ASYNC =	0x16,
+	MYRB_CMD_CHECK_CONSISTENCY =	0x0F,
+	MYRB_CMD_CHECK_CONSISTENCY_ASYNC = 0x1E,
+	MYRB_CMD_REBUILD_STAT =		0x0C,
+	MYRB_CMD_GET_REBUILD_PROGRESS =	0x27,
+	MYRB_CMD_REBUILD_CONTROL =	0x1F,
+	MYRB_CMD_READ_BADBLOCK_TABLE =	0x0B,
+	MYRB_CMD_READ_BADDATA_TABLE =	0x25,
+	MYRB_CMD_CLEAR_BADDATA_TABLE =	0x26,
+	MYRB_CMD_GET_ERROR_TABLE =	0x17,
+	MYRB_CMD_ADD_CAPACITY_ASYNC =	0x2A,
+	MYRB_CMD_BGI_CONTROL =		0x2B,
+	/* Configuration Related Commands */
+	MYRB_CMD_READ_CONFIG2 =		0x3D,
+	MYRB_CMD_WRITE_CONFIG2 =	0x3C,
+	MYRB_CMD_READ_CONFIG_ONDISK =	0x4A,
+	MYRB_CMD_WRITE_CONFIG_ONDISK =	0x4B,
+	MYRB_CMD_READ_CONFIG =		0x4E,
+	MYRB_CMD_READ_BACKUP_CONFIG =	0x4D,
+	MYRB_CMD_WRITE_CONFIG =		0x4F,
+	MYRB_CMD_ADD_CONFIG =		0x4C,
+	MYRB_CMD_READ_CONFIG_LABEL =	0x48,
+	MYRB_CMD_WRITE_CONFIG_LABEL =	0x49,
+	/* Firmware Upgrade Related Commands */
+	MYRB_CMD_LOAD_IMAGE =		0x20,
+	MYRB_CMD_STORE_IMAGE =		0x21,
+	MYRB_CMD_PROGRAM_IMAGE =	0x22,
+	/* Diagnostic Commands */
+	MYRB_CMD_SET_DIAGNOSTIC_MODE =	0x31,
+	MYRB_CMD_RUN_DIAGNOSTIC =	0x32,
+	/* Subsystem Service Commands */
+	MYRB_CMD_GET_SUBSYS_DATA =	0x70,
+	MYRB_CMD_SET_SUBSYS_PARAM =	0x71,
+	/* Version 2.xx Firmware Commands */
+	MYRB_CMD_ENQUIRY_OLD =		0x05,
+	MYRB_CMD_GET_DEVICE_STATE_OLD =	0x14,
+	MYRB_CMD_READ_OLD =		0x02,
+	MYRB_CMD_WRITE_OLD =		0x03,
+	MYRB_CMD_READ_SG_OLD =		0x82,
+	MYRB_CMD_WRITE_SG_OLD =		0x83
+} __packed;
+
+/*
+ * DAC960 V1 Firmware Command Status Codes.
+ */
+#define MYRB_STATUS_SUCCESS			0x0000	/* Common */
+#define MYRB_STATUS_CHECK_CONDITION		0x0002	/* Common */
+#define MYRB_STATUS_NO_DEVICE			0x0102	/* Common */
+#define MYRB_STATUS_INVALID_ADDRESS		0x0105	/* Common */
+#define MYRB_STATUS_INVALID_PARAM		0x0105	/* Common */
+#define MYRB_STATUS_IRRECOVERABLE_DATA_ERROR	0x0001	/* I/O */
+#define MYRB_STATUS_LDRV_NONEXISTENT_OR_OFFLINE 0x0002	/* I/O */
+#define MYRB_STATUS_ACCESS_BEYOND_END_OF_LDRV	0x0105	/* I/O */
+#define MYRB_STATUS_BAD_DATA			0x010C	/* I/O */
+#define MYRB_STATUS_DEVICE_BUSY			0x0008	/* DCDB */
+#define MYRB_STATUS_DEVICE_NONRESPONSIVE	0x000E	/* DCDB */
+#define MYRB_STATUS_COMMAND_TERMINATED		0x000F	/* DCDB */
+#define MYRB_STATUS_START_DEVICE_FAILED		0x0002	/* Device */
+#define MYRB_STATUS_INVALID_CHANNEL_OR_TARGET	0x0105	/* Device */
+#define MYRB_STATUS_CHANNEL_BUSY		0x0106	/* Device */
+#define MYRB_STATUS_OUT_OF_MEMORY		0x0107	/* Device */
+#define MYRB_STATUS_CHANNEL_NOT_STOPPED		0x0002	/* Device */
+#define MYRB_STATUS_ATTEMPT_TO_RBLD_ONLINE_DRIVE 0x0002	/* Consistency */
+#define MYRB_STATUS_RBLD_BADBLOCKS		0x0003	/* Consistency */
+#define MYRB_STATUS_RBLD_NEW_DISK_FAILED	0x0004	/* Consistency */
+#define MYRB_STATUS_RBLD_OR_CHECK_INPROGRESS	0x0106	/* Consistency */
+#define MYRB_STATUS_DEPENDENT_DISK_DEAD		0x0002	/* Consistency */
+#define MYRB_STATUS_INCONSISTENT_BLOCKS		0x0003	/* Consistency */
+#define MYRB_STATUS_INVALID_OR_NONREDUNDANT_LDRV 0x0105 /* Consistency */
+#define MYRB_STATUS_NO_RBLD_OR_CHECK_INPROGRESS	0x0105	/* Consistency */
+#define MYRB_STATUS_RBLD_IN_PROGRESS_DATA_VALID	0x0000	/* Consistency */
+#define MYRB_STATUS_RBLD_FAILED_LDEV_FAILURE	0x0002	/* Consistency */
+#define MYRB_STATUS_RBLD_FAILED_BADBLOCKS	0x0003	/* Consistency */
+#define MYRB_STATUS_RBLD_FAILED_NEW_DRIVE_FAILED 0x0004	/* Consistency */
+#define MYRB_STATUS_RBLD_SUCCESS		0x0100	/* Consistency */
+#define MYRB_STATUS_RBLD_SUCCESS_TERMINATED	0x0107	/* Consistency */
+#define MYRB_STATUS_RBLD_NOT_CHECKED		0x0108	/* Consistency */
+#define MYRB_STATUS_BGI_SUCCESS			0x0100	/* Consistency */
+#define MYRB_STATUS_BGI_ABORTED			0x0005	/* Consistency */
+#define MYRB_STATUS_NO_BGI_INPROGRESS		0x0105	/* Consistency */
+#define MYRB_STATUS_ADD_CAPACITY_INPROGRESS	0x0004	/* Consistency */
+#define MYRB_STATUS_ADD_CAPACITY_FAILED_OR_SUSPENDED 0x00F4 /* Consistency */
+#define MYRB_STATUS_CONFIG2_CSUM_ERROR		0x0002	/* Configuration */
+#define MYRB_STATUS_CONFIGURATION_SUSPENDED	0x0106	/* Configuration */
+#define MYRB_STATUS_FAILED_TO_CONFIGURE_NVRAM	0x0105	/* Configuration */
+#define MYRB_STATUS_CONFIGURATION_NOT_SAVED	0x0106	/* Configuration */
+#define MYRB_STATUS_SUBSYS_NOTINSTALLED		0x0001	/* Subsystem */
+#define MYRB_STATUS_SUBSYS_FAILED		0x0002	/* Subsystem */
+#define MYRB_STATUS_SUBSYS_BUSY			0x0106	/* Subsystem */
+#define MYRB_STATUS_SUBSYS_TIMEOUT		0x0108	/* Subsystem */
+
+/*
+ * DAC960 V1 Firmware Enquiry Command reply structure.
+ */
+struct myrb_enquiry {
+	unsigned char ldev_count;			/* Byte 0 */
+	unsigned int rsvd1:24;				/* Bytes 1-3 */
+	unsigned int ldev_sizes[32];			/* Bytes 4-131 */
+	unsigned short flash_age;			/* Bytes 132-133 */
+	struct {
+		unsigned char deferred:1;		/* Byte 134 Bit 0 */
+		unsigned char low_bat:1;		/* Byte 134 Bit 1 */
+		unsigned char rsvd2:6;			/* Byte 134 Bits 2-7 */
+	} status;
+	unsigned char rsvd3:8;				/* Byte 135 */
+	unsigned char fw_minor_version;			/* Byte 136 */
+	unsigned char fw_major_version;			/* Byte 137 */
+	enum {
+		MYRB_NO_STDBY_RBLD_OR_CHECK_IN_PROGRESS =	0x00,
+		MYRB_STDBY_RBLD_IN_PROGRESS =			0x01,
+		MYRB_BG_RBLD_IN_PROGRESS =			0x02,
+		MYRB_BG_CHECK_IN_PROGRESS =			0x03,
+		MYRB_STDBY_RBLD_COMPLETED_WITH_ERROR =		0xFF,
+		MYRB_BG_RBLD_OR_CHECK_FAILED_DRIVE_FAILED =	0xF0,
+		MYRB_BG_RBLD_OR_CHECK_FAILED_LDEV_FAILED =	0xF1,
+		MYRB_BG_RBLD_OR_CHECK_FAILED_OTHER =		0xF2,
+		MYRB_BG_RBLD_OR_CHECK_SUCCESS_TERMINATED =	0xF3
+	} __packed rbld;		/* Byte 138 */
+	unsigned char max_tcq;				/* Byte 139 */
+	unsigned char ldev_offline;			/* Byte 140 */
+	unsigned char rsvd4:8;				/* Byte 141 */
+	unsigned short ev_seq;				/* Bytes 142-143 */
+	unsigned char ldev_critical;			/* Byte 144 */
+	unsigned int rsvd5:24;				/* Bytes 145-147 */
+	unsigned char pdev_dead;			/* Byte 148 */
+	unsigned char rsvd6:8;				/* Byte 149 */
+	unsigned char rbld_count;			/* Byte 150 */
+	struct {
+		unsigned char rsvd7:3;			/* Byte 151 Bits 0-2 */
+		unsigned char bbu_present:1;		/* Byte 151 Bit 3 */
+		unsigned char rsvd8:4;			/* Byte 151 Bits 4-7 */
+	} misc;
+	struct {
+		unsigned char target;
+		unsigned char channel;
+	} dead_drives[21];				/* Bytes 152-194 */
+	unsigned char rsvd9[62];			/* Bytes 195-255 */
+} __packed;
+
+/*
+ * DAC960 V1 Firmware Enquiry2 Command reply structure.
+ */
+struct myrb_enquiry2 {
+	struct {
+		enum {
+			DAC960_V1_P_PD_PU =			0x01,
+			DAC960_V1_PL =				0x02,
+			DAC960_V1_PG =				0x10,
+			DAC960_V1_PJ =				0x11,
+			DAC960_V1_PR =				0x12,
+			DAC960_V1_PT =				0x13,
+			DAC960_V1_PTL0 =			0x14,
+			DAC960_V1_PRL =				0x15,
+			DAC960_V1_PTL1 =			0x16,
+			DAC960_V1_1164P =			0x20
+		} __packed sub_model;		/* Byte 0 */
+		unsigned char actual_channels;			/* Byte 1 */
+		enum {
+			MYRB_5_CHANNEL_BOARD =		0x01,
+			MYRB_3_CHANNEL_BOARD =		0x02,
+			MYRB_2_CHANNEL_BOARD =		0x03,
+			MYRB_3_CHANNEL_ASIC_DAC =	0x04
+		} __packed model;		/* Byte 2 */
+		enum {
+			MYRB_EISA_CONTROLLER =		0x01,
+			MYRB_MCA_CONTROLLER =		0x02,
+			MYRB_PCI_CONTROLLER =		0x03,
+			MYRB_SCSI_TO_SCSI =		0x08
+		} __packed controller;	/* Byte 3 */
+	} hw;						/* Bytes 0-3 */
+	/* MajorVersion.MinorVersion-FirmwareType-TurnID */
+	struct {
+		unsigned char major_version;		/* Byte 4 */
+		unsigned char minor_version;		/* Byte 5 */
+		unsigned char turn_id;			/* Byte 6 */
+		char firmware_type;			/* Byte 7 */
+	} fw;						/* Bytes 4-7 */
+	unsigned int rsvd1;				/* Byte 8-11 */
+	unsigned char cfg_chan;				/* Byte 12 */
+	unsigned char cur_chan;				/* Byte 13 */
+	unsigned char max_targets;			/* Byte 14 */
+	unsigned char max_tcq;				/* Byte 15 */
+	unsigned char max_ldev;				/* Byte 16 */
+	unsigned char max_arms;				/* Byte 17 */
+	unsigned char max_spans;			/* Byte 18 */
+	unsigned char rsvd2;				/* Byte 19 */
+	unsigned int rsvd3;				/* Bytes 20-23 */
+	unsigned int mem_size;				/* Bytes 24-27 */
+	unsigned int cache_size;			/* Bytes 28-31 */
+	unsigned int flash_size;			/* Bytes 32-35 */
+	unsigned int nvram_size;			/* Bytes 36-39 */
+	struct {
+		enum {
+			MYRB_RAM_TYPE_DRAM =		0x0,
+			MYRB_RAM_TYPE_EDO =			0x1,
+			MYRB_RAM_TYPE_SDRAM =		0x2,
+			MYRB_RAM_TYPE_Last =		0x7
+		} __packed ram:3;	/* Byte 40 Bits 0-2 */
+		enum {
+			MYRB_ERR_CORR_None =	0x0,
+			MYRB_ERR_CORR_Parity =	0x1,
+			MYRB_ERR_CORR_ECC =		0x2,
+			MYRB_ERR_CORR_Last =	0x7
+		} __packed ec:3;	/* Byte 40 Bits 3-5 */
+		unsigned char fast_page:1;		/* Byte 40 Bit 6 */
+		unsigned char low_power:1;		/* Byte 40 Bit 7 */
+		unsigned char rsvd4;			/* Bytes 41 */
+	} mem_type;
+	unsigned short clock_speed;			/* Bytes 42-43 */
+	unsigned short mem_speed;			/* Bytes 44-45 */
+	unsigned short hw_speed;			/* Bytes 46-47 */
+	unsigned char rsvd5[12];			/* Bytes 48-59 */
+	unsigned short max_cmds;			/* Bytes 60-61 */
+	unsigned short max_sge;				/* Bytes 62-63 */
+	unsigned short max_drv_cmds;			/* Bytes 64-65 */
+	unsigned short max_io_desc;			/* Bytes 66-67 */
+	unsigned short max_sectors;			/* Bytes 68-69 */
+	unsigned char latency;				/* Byte 70 */
+	unsigned char rsvd6;				/* Byte 71 */
+	unsigned char scsi_tmo;				/* Byte 72 */
+	unsigned char rsvd7;				/* Byte 73 */
+	unsigned short min_freelines;			/* Bytes 74-75 */
+	unsigned char rsvd8[8];				/* Bytes 76-83 */
+	unsigned char rbld_rate_const;			/* Byte 84 */
+	unsigned char rsvd9[11];			/* Byte 85-95 */
+	unsigned short pdrv_block_size;			/* Bytes 96-97 */
+	unsigned short ldev_block_size;			/* Bytes 98-99 */
+	unsigned short max_blocks_per_cmd;		/* Bytes 100-101 */
+	unsigned short block_factor;			/* Bytes 102-103 */
+	unsigned short cacheline_size;			/* Bytes 104-105 */
+	struct {
+		enum {
+			MYRB_WIDTH_NARROW_8BIT =		0x0,
+			MYRB_WIDTH_WIDE_16BIT =			0x1,
+			MYRB_WIDTH_WIDE_32BIT =			0x2
+		} __packed bus_width:2;	/* Byte 106 Bits 0-1 */
+		enum {
+			MYRB_SCSI_SPEED_FAST =			0x0,
+			MYRB_SCSI_SPEED_ULTRA =			0x1,
+			MYRB_SCSI_SPEED_ULTRA2 =		0x2
+		} __packed bus_speed:2;	/* Byte 106 Bits 2-3 */
+		unsigned char differential:1;		/* Byte 106 Bit 4 */
+		unsigned char rsvd10:3;			/* Byte 106 Bits 5-7 */
+	} scsi_cap;
+	unsigned char rsvd11[5];			/* Byte 107-111 */
+	unsigned short fw_build;			/* Bytes 112-113 */
+	enum {
+		MYRB_FAULT_AEMI =				0x01,
+		MYRB_FAULT_OEM1 =				0x02,
+		MYRB_FAULT_OEM2 =				0x04,
+		MYRB_FAULT_OEM3 =				0x08,
+		MYRB_FAULT_CONNER =				0x10,
+		MYRB_FAULT_SAFTE =				0x20
+	} __packed fault_mgmt;		/* Byte 114 */
+	unsigned char rsvd12;				/* Byte 115 */
+	struct {
+		unsigned int clustering:1;		/* Byte 116 Bit 0 */
+		unsigned int online_RAID_expansion:1;	/* Byte 116 Bit 1 */
+		unsigned int readahead:1;		/* Byte 116 Bit 2 */
+		unsigned int bgi:1;			/* Byte 116 Bit 3 */
+		unsigned int rsvd13:28;			/* Bytes 116-119 */
+	} fw_features;
+	unsigned char rsvd14[8];			/* Bytes 120-127 */
+} __packed;
+
+/*
+ * DAC960 V1 Firmware Logical Drive State type.
+ */
+enum myrb_devstate {
+	MYRB_DEVICE_DEAD =		0x00,
+	MYRB_DEVICE_WO =		0x02,
+	MYRB_DEVICE_ONLINE =		0x03,
+	MYRB_DEVICE_CRITICAL =		0x04,
+	MYRB_DEVICE_STANDBY =		0x10,
+	MYRB_DEVICE_OFFLINE =		0xFF
+} __packed;
+
+/*
+ * DAC960 V1 RAID Levels
+ */
+enum myrb_raidlevel {
+	MYRB_RAID_LEVEL0 =		0x0,     /* RAID 0 */
+	MYRB_RAID_LEVEL1 =		0x1,     /* RAID 1 */
+	MYRB_RAID_LEVEL3 =		0x3,     /* RAID 3 */
+	MYRB_RAID_LEVEL5 =		0x5,     /* RAID 5 */
+	MYRB_RAID_LEVEL6 =		0x6,     /* RAID 6 */
+	MYRB_RAID_JBOD =		0x7,     /* RAID 7 (JBOD) */
+} __packed;
+
+/*
+ * DAC960 V1 Firmware Logical Drive Information structure.
+ */
+struct myrb_ldev_info {
+	unsigned int size;				/* Bytes 0-3 */
+	enum myrb_devstate state;			/* Byte 4 */
+	unsigned int raid_level:7;			/* Byte 5 Bits 0-6 */
+	unsigned int wb_enabled:1;			/* Byte 5 Bit 7 */
+	unsigned int rsvd:16;				/* Bytes 6-7 */
+};
+
+/*
+ * DAC960 V1 Firmware Perform Event Log Operation Types.
+ */
+#define DAC960_V1_GetEventLogEntry		0x00
+
+/*
+ * DAC960 V1 Firmware Get Event Log Entry Command reply structure.
+ */
+struct myrb_log_entry {
+	unsigned char msg_type;			/* Byte 0 */
+	unsigned char msg_len;			/* Byte 1 */
+	unsigned char target:5;			/* Byte 2 Bits 0-4 */
+	unsigned char channel:3;		/* Byte 2 Bits 5-7 */
+	unsigned char lun:6;			/* Byte 3 Bits 0-5 */
+	unsigned char rsvd1:2;			/* Byte 3 Bits 6-7 */
+	unsigned short seq_num;			/* Bytes 4-5 */
+	unsigned char sense[26];		/* Bytes 6-31 */
+};
+
+/*
+ * DAC960 V1 Firmware Get Device State Command reply structure.
+ * The structure is padded by 2 bytes for compatibility with Version 2.xx
+ * Firmware.
+ */
+struct myrb_pdev_state {
+	unsigned int present:1;			/* Byte 0 Bit 0 */
+	unsigned int :7;				/* Byte 0 Bits 1-7 */
+	enum {
+		MYRB_TYPE_OTHER =			0x0,
+		MYRB_TYPE_DISK =			0x1,
+		MYRB_TYPE_TAPE =			0x2,
+		MYRB_TYPE_CDROM_OR_WORM =		0x3
+	} __packed devtype:2;		/* Byte 1 Bits 0-1 */
+	unsigned int rsvd1:1;				/* Byte 1 Bit 2 */
+	unsigned int fast20:1;				/* Byte 1 Bit 3 */
+	unsigned int sync:1;				/* Byte 1 Bit 4 */
+	unsigned int fast:1;				/* Byte 1 Bit 5 */
+	unsigned int wide:1;				/* Byte 1 Bit 6 */
+	unsigned int tcq_supported:1;			/* Byte 1 Bit 7 */
+	enum myrb_devstate state;			/* Byte 2 */
+	unsigned int rsvd2:8;				/* Byte 3 */
+	unsigned int sync_multiplier;			/* Byte 4 */
+	unsigned int sync_offset:5;			/* Byte 5 Bits 0-4 */
+	unsigned int rsvd3:3;				/* Byte 5 Bits 5-7 */
+	unsigned int size;				/* Bytes 6-9 */
+	unsigned int rsvd4:16;			/* Bytes 10-11 */
+} __packed;
+
+/*
+ * DAC960 V1 Firmware Get Rebuild Progress Command reply structure.
+ */
+struct myrb_rbld_progress {
+	unsigned int ldev_num;				/* Bytes 0-3 */
+	unsigned int ldev_size;				/* Bytes 4-7 */
+	unsigned int blocks_left;			/* Bytes 8-11 */
+};
+
+/*
+ * DAC960 V1 Firmware Background Initialization Status Command reply structure.
+ */
+struct myrb_bgi_status {
+	unsigned int ldev_size;				/* Bytes 0-3 */
+	unsigned int blocks_done;			/* Bytes 4-7 */
+	unsigned char rsvd1[12];			/* Bytes 8-19 */
+	unsigned int ldev_num;				/* Bytes 20-23 */
+	unsigned char raid_level;			/* Byte 24 */
+	enum {
+		MYRB_BGI_INVALID =	0x00,
+		MYRB_BGI_STARTED =	0x02,
+		MYRB_BGI_INPROGRESS =	0x04,
+		MYRB_BGI_SUSPENDED =	0x05,
+		MYRB_BGI_CANCELLED =	0x06
+	} __packed status;		/* Byte 25 */
+	unsigned char rsvd2[6];				/* Bytes 26-31 */
+};
+
+/*
+ * DAC960 V1 Firmware Error Table Entry structure.
+ */
+struct myrb_error_entry {
+	unsigned char parity_err;			/* Byte 0 */
+	unsigned char soft_err;				/* Byte 1 */
+	unsigned char hard_err;				/* Byte 2 */
+	unsigned char misc_err;				/* Byte 3 */
+};
+
+/*
+ * DAC960 V1 Firmware Read Config2 Command reply structure.
+ */
+struct myrb_config2 {
+	unsigned rsvd1:1;				/* Byte 0 Bit 0 */
+	unsigned active_negation:1;			/* Byte 0 Bit 1 */
+	unsigned rsvd2:5;				/* Byte 0 Bits 2-6 */
+	unsigned no_rescan_on_reset_during_scan:1;	/* Byte 0 Bit 7 */
+	unsigned StorageWorks_support:1;		/* Byte 1 Bit 0 */
+	unsigned HewlettPackard_support:1;		/* Byte 1 Bit 1 */
+	unsigned no_disconnect_on_first_command:1;	/* Byte 1 Bit 2 */
+	unsigned rsvd3:2;				/* Byte 1 Bits 3-4 */
+	unsigned AEMI_ARM:1;				/* Byte 1 Bit 5 */
+	unsigned AEMI_OFM:1;				/* Byte 1 Bit 6 */
+	unsigned rsvd4:1;				/* Byte 1 Bit 7 */
+	enum {
+		MYRB_OEMID_MYLEX =		0x00,
+		MYRB_OEMID_IBM =		0x08,
+		MYRB_OEMID_HP =			0x0A,
+		MYRB_OEMID_DEC =		0x0C,
+		MYRB_OEMID_SIEMENS =		0x10,
+		MYRB_OEMID_INTEL =		0x12
+	} __packed OEMID;		/* Byte 2 */
+	unsigned char oem_model_number;			/* Byte 3 */
+	unsigned char physical_sector;			/* Byte 4 */
+	unsigned char logical_sector;			/* Byte 5 */
+	unsigned char block_factor;			/* Byte 6 */
+	unsigned readahead_enabled:1;			/* Byte 7 Bit 0 */
+	unsigned low_BIOS_delay:1;			/* Byte 7 Bit 1 */
+	unsigned rsvd5:2;				/* Byte 7 Bits 2-3 */
+	unsigned restrict_reassign_to_one_sector:1;	/* Byte 7 Bit 4 */
+	unsigned rsvd6:1;				/* Byte 7 Bit 5 */
+	unsigned FUA_during_write_recovery:1;		/* Byte 7 Bit 6 */
+	unsigned enable_LeftSymmetricRAID5Algorithm:1;	/* Byte 7 Bit 7 */
+	unsigned char default_rebuild_rate;		/* Byte 8 */
+	unsigned char rsvd7;				/* Byte 9 */
+	unsigned char blocks_per_cacheline;		/* Byte 10 */
+	unsigned char blocks_per_stripe;		/* Byte 11 */
+	struct {
+		enum {
+			MYRB_SPEED_ASYNC =		0x0,
+			MYRB_SPEED_SYNC_8MHz =		0x1,
+			MYRB_SPEED_SYNC_5MHz =		0x2,
+			MYRB_SPEED_SYNC_10_OR_20MHz =	0x3
+		} __packed speed:2;	/* Byte 11 Bits 0-1 */
+		unsigned force_8bit:1;			/* Byte 11 Bit 2 */
+		unsigned disable_fast20:1;		/* Byte 11 Bit 3 */
+		unsigned rsvd8:3;			/* Byte 11 Bits 4-6 */
+		unsigned enable_tcq:1;			/* Byte 11 Bit 7 */
+	} __packed channelparam[6];	/* Bytes 12-17 */
+	unsigned char SCSIInitiatorID;			/* Byte 18 */
+	unsigned char rsvd9;				/* Byte 19 */
+	enum {
+		MYRB_STARTUP_CONTROLLER_SPINUP =	0x00,
+		MYRB_STARTUP_POWERON_SPINUP =		0x01
+	} __packed startup;		/* Byte 20 */
+	unsigned char simultaneous_device_spinup_count;	/* Byte 21 */
+	unsigned char seconds_delay_between_spinups;	/* Byte 22 */
+	unsigned char rsvd10[29];			/* Bytes 23-51 */
+	unsigned BIOS_disabled:1;			/* Byte 52 Bit 0 */
+	unsigned CDROM_boot_enabled:1;			/* Byte 52 Bit 1 */
+	unsigned rsvd11:3;				/* Byte 52 Bits 2-4 */
+	enum {
+		MYRB_GEOM_128_32 =		0x0,
+		MYRB_GEOM_255_63 =		0x1,
+		MYRB_GEOM_RESERVED1 =		0x2,
+		MYRB_GEOM_RESERVED2 =		0x3
+	} __packed drive_geometry:2;	/* Byte 52 Bits 5-6 */
+	unsigned rsvd12:1;				/* Byte 52 Bit 7 */
+	unsigned char rsvd13[9];			/* Bytes 53-61 */
+	unsigned short csum;				/* Bytes 62-63 */
+};
+
+/*
+ * DAC960 V1 Firmware DCDB request structure.
+ */
+struct myrb_dcdb {
+	unsigned target:4;				 /* Byte 0 Bits 0-3 */
+	unsigned channel:4;				 /* Byte 0 Bits 4-7 */
+	enum {
+		MYRB_DCDB_XFER_NONE =		0,
+		MYRB_DCDB_XFER_DEVICE_TO_SYSTEM = 1,
+		MYRB_DCDB_XFER_SYSTEM_TO_DEVICE = 2,
+		MYRB_DCDB_XFER_ILLEGAL =	3
+	} __packed data_xfer:2;				/* Byte 1 Bits 0-1 */
+	unsigned early_status:1;			/* Byte 1 Bit 2 */
+	unsigned rsvd1:1;				/* Byte 1 Bit 3 */
+	enum {
+		MYRB_DCDB_TMO_24_HRS =	0,
+		MYRB_DCDB_TMO_10_SECS =	1,
+		MYRB_DCDB_TMO_60_SECS =	2,
+		MYRB_DCDB_TMO_10_MINS =	3
+	} __packed timeout:2;				/* Byte 1 Bits 4-5 */
+	unsigned no_autosense:1;			/* Byte 1 Bit 6 */
+	unsigned allow_disconnect:1;			/* Byte 1 Bit 7 */
+	unsigned short xfer_len_lo;			/* Bytes 2-3 */
+	u32 dma_addr;					/* Bytes 4-7 */
+	unsigned char cdb_len:4;			/* Byte 8 Bits 0-3 */
+	unsigned char xfer_len_hi4:4;			/* Byte 8 Bits 4-7 */
+	unsigned char sense_len;			/* Byte 9 */
+	unsigned char cdb[12];				/* Bytes 10-21 */
+	unsigned char sense[64];			/* Bytes 22-85 */
+	unsigned char status;				/* Byte 86 */
+	unsigned char rsvd2;				/* Byte 87 */
+};
+
+/*
+ * DAC960 V1 Firmware Scatter/Gather List Type 1 32 Bit Address
+ *32 Bit Byte Count structure.
+ */
+struct myrb_sge {
+	u32 sge_addr;		/* Bytes 0-3 */
+	u32 sge_count;		/* Bytes 4-7 */
+};
+
+/*
+ * 13 Byte DAC960 V1 Firmware Command Mailbox structure.
+ * Bytes 13-15 are not used.  The structure is padded to 16 bytes for
+ * efficient access.
+ */
+union myrb_cmd_mbox {
+	unsigned int words[4];				/* Words 0-3 */
+	unsigned char bytes[16];			/* Bytes 0-15 */
+	struct {
+		enum myrb_cmd_opcode opcode;		/* Byte 0 */
+		unsigned char id;			/* Byte 1 */
+		unsigned char rsvd[14];			/* Bytes 2-15 */
+	} __packed common;
+	struct {
+		enum myrb_cmd_opcode opcode;		/* Byte 0 */
+		unsigned char id;			/* Byte 1 */
+		unsigned char rsvd1[6];			/* Bytes 2-7 */
+		u32 addr;				/* Bytes 8-11 */
+		unsigned char rsvd2[4];			/* Bytes 12-15 */
+	} __packed type3;
+	struct {
+		enum myrb_cmd_opcode opcode;		/* Byte 0 */
+		unsigned char id;			/* Byte 1 */
+		unsigned char optype;			/* Byte 2 */
+		unsigned char rsvd1[5];			/* Bytes 3-7 */
+		u32 addr;				/* Bytes 8-11 */
+		unsigned char rsvd2[4];			/* Bytes 12-15 */
+	} __packed type3B;
+	struct {
+		enum myrb_cmd_opcode opcode;		/* Byte 0 */
+		unsigned char id;			/* Byte 1 */
+		unsigned char rsvd1[5];			/* Bytes 2-6 */
+		unsigned char ldev_num:6;		/* Byte 7 Bits 0-6 */
+		unsigned char auto_restore:1;		/* Byte 7 Bit 7 */
+		unsigned char rsvd2[8];			/* Bytes 8-15 */
+	} __packed type3C;
+	struct {
+		enum myrb_cmd_opcode opcode;		/* Byte 0 */
+		unsigned char id;			/* Byte 1 */
+		unsigned char channel;			/* Byte 2 */
+		unsigned char target;			/* Byte 3 */
+		enum myrb_devstate state;		/* Byte 4 */
+		unsigned char rsvd1[3];			/* Bytes 5-7 */
+		u32 addr;				/* Bytes 8-11 */
+		unsigned char rsvd2[4];			/* Bytes 12-15 */
+	} __packed type3D;
+	struct {
+		enum myrb_cmd_opcode opcode;		/* Byte 0 */
+		unsigned char id;			/* Byte 1 */
+		unsigned char optype;			/* Byte 2 */
+		unsigned char opqual;			/* Byte 3 */
+		unsigned short ev_seq;			/* Bytes 4-5 */
+		unsigned char rsvd1[2];			/* Bytes 6-7 */
+		u32 addr;				/* Bytes 8-11 */
+		unsigned char rsvd2[4];			/* Bytes 12-15 */
+	} __packed type3E;
+	struct {
+		enum myrb_cmd_opcode opcode;		/* Byte 0 */
+		unsigned char id;			/* Byte 1 */
+		unsigned char rsvd1[2];			/* Bytes 2-3 */
+		unsigned char rbld_rate;		/* Byte 4 */
+		unsigned char rsvd2[3];			/* Bytes 5-7 */
+		u32 addr;				/* Bytes 8-11 */
+		unsigned char rsvd3[4];			/* Bytes 12-15 */
+	} __packed type3R;
+	struct {
+		enum myrb_cmd_opcode opcode;		/* Byte 0 */
+		unsigned char id;			/* Byte 1 */
+		unsigned short xfer_len;		/* Bytes 2-3 */
+		unsigned int lba;			/* Bytes 4-7 */
+		u32 addr;				/* Bytes 8-11 */
+		unsigned char ldev_num;			/* Byte 12 */
+		unsigned char rsvd[3];			/* Bytes 13-15 */
+	} __packed type4;
+	struct {
+		enum myrb_cmd_opcode opcode;		/* Byte 0 */
+		unsigned char id;			/* Byte 1 */
+		struct {
+			unsigned short xfer_len:11;	/* Bytes 2-3 */
+			unsigned char ldev_num:5;	/* Byte 3 Bits 3-7 */
+		} __packed ld;
+		unsigned int lba;			/* Bytes 4-7 */
+		u32 addr;				/* Bytes 8-11 */
+		unsigned char sg_count:6;		/* Byte 12 Bits 0-5 */
+		enum {
+			MYRB_SGL_ADDR32_COUNT32 = 0x0,
+			MYRB_SGL_ADDR32_COUNT16 = 0x1,
+			MYRB_SGL_COUNT32_ADDR32 = 0x2,
+			MYRB_SGL_COUNT16_ADDR32 = 0x3
+		} __packed sg_type:2;	/* Byte 12 Bits 6-7 */
+		unsigned char rsvd[3];			/* Bytes 13-15 */
+	} __packed type5;
+	struct {
+		enum myrb_cmd_opcode opcode;		/* Byte 0 */
+		unsigned char id;			/* Byte 1 */
+		unsigned char opcode2;			/* Byte 2 */
+		unsigned char rsvd1:8;			/* Byte 3 */
+		u32 cmd_mbox_addr;			/* Bytes 4-7 */
+		u32 stat_mbox_addr;			/* Bytes 8-11 */
+		unsigned char rsvd2[4];			/* Bytes 12-15 */
+	} __packed typeX;
+};
+
+/*
+ * DAC960 V1 Firmware Controller Status Mailbox structure.
+ */
+struct myrb_stat_mbox {
+	unsigned char id;		/* Byte 0 */
+	unsigned char rsvd:7;		/* Byte 1 Bits 0-6 */
+	unsigned char valid:1;			/* Byte 1 Bit 7 */
+	unsigned short status;		/* Bytes 2-3 */
+};
+
+struct myrb_cmdblk {
+	union myrb_cmd_mbox mbox;
+	unsigned short status;
+	struct completion *completion;
+	struct myrb_dcdb *dcdb;
+	dma_addr_t dcdb_addr;
+	struct myrb_sge *sgl;
+	dma_addr_t sgl_addr;
+};
+
+struct myrb_hba {
+	unsigned int ldev_block_size;
+	unsigned char ldev_geom_heads;
+	unsigned char ldev_geom_sectors;
+	unsigned char bus_width;
+	unsigned short stripe_size;
+	unsigned short segment_size;
+	unsigned short new_ev_seq;
+	unsigned short old_ev_seq;
+	bool dual_mode_interface;
+	bool bgi_status_supported;
+	bool safte_enabled;
+	bool need_ldev_info;
+	bool need_err_info;
+	bool need_rbld;
+	bool need_cc_status;
+	bool need_bgi_status;
+	bool rbld_first;
+
+	struct pci_dev *pdev;
+	struct Scsi_Host *host;
+
+	struct workqueue_struct *work_q;
+	char work_q_name[20];
+	struct delayed_work monitor_work;
+	unsigned long primary_monitor_time;
+	unsigned long secondary_monitor_time;
+
+	struct dma_pool *sg_pool;
+	struct dma_pool *dcdb_pool;
+
+	spinlock_t queue_lock;
+
+	void (*qcmd)(struct myrb_hba *cs, struct myrb_cmdblk *cmd_blk);
+	void (*write_cmd_mbox)(union myrb_cmd_mbox *next_mbox,
+			       union myrb_cmd_mbox *cmd_mbox);
+	void (*get_cmd_mbox)(void __iomem *base);
+	void (*disable_intr)(void __iomem *base);
+	void (*reset)(void __iomem *base);
+
+	unsigned int ctlr_num;
+	unsigned char model_name[20];
+	unsigned char fw_version[12];
+
+	unsigned int irq;
+	phys_addr_t io_addr;
+	phys_addr_t pci_addr;
+	void __iomem *io_base;
+	void __iomem *mmio_base;
+
+	size_t cmd_mbox_size;
+	dma_addr_t cmd_mbox_addr;
+	union myrb_cmd_mbox *first_cmd_mbox;
+	union myrb_cmd_mbox *last_cmd_mbox;
+	union myrb_cmd_mbox *next_cmd_mbox;
+	union myrb_cmd_mbox *prev_cmd_mbox1;
+	union myrb_cmd_mbox *prev_cmd_mbox2;
+
+	size_t stat_mbox_size;
+	dma_addr_t stat_mbox_addr;
+	struct myrb_stat_mbox *first_stat_mbox;
+	struct myrb_stat_mbox *last_stat_mbox;
+	struct myrb_stat_mbox *next_stat_mbox;
+
+	struct myrb_cmdblk dcmd_blk;
+	struct myrb_cmdblk mcmd_blk;
+	struct mutex dcmd_mutex;
+
+	struct myrb_enquiry *enquiry;
+	dma_addr_t enquiry_addr;
+
+	struct myrb_error_entry *err_table;
+	dma_addr_t err_table_addr;
+
+	unsigned short last_rbld_status;
+
+	struct myrb_ldev_info *ldev_info_buf;
+	dma_addr_t ldev_info_addr;
+
+	struct myrb_bgi_status bgi_status;
+
+	struct mutex dma_mutex;
+};
+
+/*
+ * DAC960 LA Series Controller Interface Register Offsets.
+ */
+#define DAC960_LA_mmio_size		0x80
+
+enum DAC960_LA_reg_offset {
+	DAC960_LA_IRQMASK_OFFSET	= 0x34,
+	DAC960_LA_CMDOP_OFFSET		= 0x50,
+	DAC960_LA_CMDID_OFFSET		= 0x51,
+	DAC960_LA_MBOX2_OFFSET		= 0x52,
+	DAC960_LA_MBOX3_OFFSET		= 0x53,
+	DAC960_LA_MBOX4_OFFSET		= 0x54,
+	DAC960_LA_MBOX5_OFFSET		= 0x55,
+	DAC960_LA_MBOX6_OFFSET		= 0x56,
+	DAC960_LA_MBOX7_OFFSET		= 0x57,
+	DAC960_LA_MBOX8_OFFSET		= 0x58,
+	DAC960_LA_MBOX9_OFFSET		= 0x59,
+	DAC960_LA_MBOX10_OFFSET		= 0x5A,
+	DAC960_LA_MBOX11_OFFSET		= 0x5B,
+	DAC960_LA_MBOX12_OFFSET		= 0x5C,
+	DAC960_LA_STSID_OFFSET		= 0x5D,
+	DAC960_LA_STS_OFFSET		= 0x5E,
+	DAC960_LA_IDB_OFFSET		= 0x60,
+	DAC960_LA_ODB_OFFSET		= 0x61,
+	DAC960_LA_ERRSTS_OFFSET		= 0x63,
+};
+
+/*
+ * DAC960 LA Series Inbound Door Bell Register.
+ */
+#define DAC960_LA_IDB_HWMBOX_NEW_CMD 0x01
+#define DAC960_LA_IDB_HWMBOX_ACK_STS 0x02
+#define DAC960_LA_IDB_GEN_IRQ 0x04
+#define DAC960_LA_IDB_CTRL_RESET 0x08
+#define DAC960_LA_IDB_MMBOX_NEW_CMD 0x10
+
+#define DAC960_LA_IDB_HWMBOX_EMPTY 0x01
+#define DAC960_LA_IDB_INIT_DONE 0x02
+
+/*
+ * DAC960 LA Series Outbound Door Bell Register.
+ */
+#define DAC960_LA_ODB_HWMBOX_ACK_IRQ 0x01
+#define DAC960_LA_ODB_MMBOX_ACK_IRQ 0x02
+#define DAC960_LA_ODB_HWMBOX_STS_AVAIL 0x01
+#define DAC960_LA_ODB_MMBOX_STS_AVAIL 0x02
+
+/*
+ * DAC960 LA Series Interrupt Mask Register.
+ */
+#define DAC960_LA_IRQMASK_DISABLE_IRQ 0x04
+
+/*
+ * DAC960 LA Series Error Status Register.
+ */
+#define DAC960_LA_ERRSTS_PENDING 0x02
+
+/*
+ * DAC960 PG Series Controller Interface Register Offsets.
+ */
+#define DAC960_PG_mmio_size		0x2000
+
+enum DAC960_PG_reg_offset {
+	DAC960_PG_IDB_OFFSET		= 0x0020,
+	DAC960_PG_ODB_OFFSET		= 0x002C,
+	DAC960_PG_IRQMASK_OFFSET	= 0x0034,
+	DAC960_PG_CMDOP_OFFSET		= 0x1000,
+	DAC960_PG_CMDID_OFFSET		= 0x1001,
+	DAC960_PG_MBOX2_OFFSET		= 0x1002,
+	DAC960_PG_MBOX3_OFFSET		= 0x1003,
+	DAC960_PG_MBOX4_OFFSET		= 0x1004,
+	DAC960_PG_MBOX5_OFFSET		= 0x1005,
+	DAC960_PG_MBOX6_OFFSET		= 0x1006,
+	DAC960_PG_MBOX7_OFFSET		= 0x1007,
+	DAC960_PG_MBOX8_OFFSET		= 0x1008,
+	DAC960_PG_MBOX9_OFFSET		= 0x1009,
+	DAC960_PG_MBOX10_OFFSET		= 0x100A,
+	DAC960_PG_MBOX11_OFFSET		= 0x100B,
+	DAC960_PG_MBOX12_OFFSET		= 0x100C,
+	DAC960_PG_STSID_OFFSET		= 0x1018,
+	DAC960_PG_STS_OFFSET		= 0x101A,
+	DAC960_PG_ERRSTS_OFFSET		= 0x103F,
+};
+
+/*
+ * DAC960 PG Series Inbound Door Bell Register.
+ */
+#define DAC960_PG_IDB_HWMBOX_NEW_CMD 0x01
+#define DAC960_PG_IDB_HWMBOX_ACK_STS 0x02
+#define DAC960_PG_IDB_GEN_IRQ 0x04
+#define DAC960_PG_IDB_CTRL_RESET 0x08
+#define DAC960_PG_IDB_MMBOX_NEW_CMD 0x10
+
+#define DAC960_PG_IDB_HWMBOX_FULL 0x01
+#define DAC960_PG_IDB_INIT_IN_PROGRESS 0x02
+
+/*
+ * DAC960 PG Series Outbound Door Bell Register.
+ */
+#define DAC960_PG_ODB_HWMBOX_ACK_IRQ 0x01
+#define DAC960_PG_ODB_MMBOX_ACK_IRQ 0x02
+#define DAC960_PG_ODB_HWMBOX_STS_AVAIL 0x01
+#define DAC960_PG_ODB_MMBOX_STS_AVAIL 0x02
+
+/*
+ * DAC960 PG Series Interrupt Mask Register.
+ */
+#define DAC960_PG_IRQMASK_MSI_MASK1 0x03
+#define DAC960_PG_IRQMASK_DISABLE_IRQ 0x04
+#define DAC960_PG_IRQMASK_MSI_MASK2 0xF8
+
+/*
+ * DAC960 PG Series Error Status Register.
+ */
+#define DAC960_PG_ERRSTS_PENDING 0x04
+
+/*
+ * DAC960 PD Series Controller Interface Register Offsets.
+ */
+#define DAC960_PD_mmio_size		0x80
+
+enum DAC960_PD_reg_offset {
+	DAC960_PD_CMDOP_OFFSET		= 0x00,
+	DAC960_PD_CMDID_OFFSET		= 0x01,
+	DAC960_PD_MBOX2_OFFSET		= 0x02,
+	DAC960_PD_MBOX3_OFFSET		= 0x03,
+	DAC960_PD_MBOX4_OFFSET		= 0x04,
+	DAC960_PD_MBOX5_OFFSET		= 0x05,
+	DAC960_PD_MBOX6_OFFSET		= 0x06,
+	DAC960_PD_MBOX7_OFFSET		= 0x07,
+	DAC960_PD_MBOX8_OFFSET		= 0x08,
+	DAC960_PD_MBOX9_OFFSET		= 0x09,
+	DAC960_PD_MBOX10_OFFSET		= 0x0A,
+	DAC960_PD_MBOX11_OFFSET		= 0x0B,
+	DAC960_PD_MBOX12_OFFSET		= 0x0C,
+	DAC960_PD_STSID_OFFSET		= 0x0D,
+	DAC960_PD_STS_OFFSET		= 0x0E,
+	DAC960_PD_ERRSTS_OFFSET		= 0x3F,
+	DAC960_PD_IDB_OFFSET		= 0x40,
+	DAC960_PD_ODB_OFFSET		= 0x41,
+	DAC960_PD_IRQEN_OFFSET		= 0x43,
+};
+
+/*
+ * DAC960 PD Series Inbound Door Bell Register.
+ */
+#define DAC960_PD_IDB_HWMBOX_NEW_CMD 0x01
+#define DAC960_PD_IDB_HWMBOX_ACK_STS 0x02
+#define DAC960_PD_IDB_GEN_IRQ 0x04
+#define DAC960_PD_IDB_CTRL_RESET 0x08
+
+#define DAC960_PD_IDB_HWMBOX_FULL 0x01
+#define DAC960_PD_IDB_INIT_IN_PROGRESS 0x02
+
+/*
+ * DAC960 PD Series Outbound Door Bell Register.
+ */
+#define DAC960_PD_ODB_HWMBOX_ACK_IRQ 0x01
+#define DAC960_PD_ODB_HWMBOX_STS_AVAIL 0x01
+
+/*
+ * DAC960 PD Series Interrupt Enable Register.
+ */
+#define DAC960_PD_IRQMASK_ENABLE_IRQ 0x01
+
+/*
+ * DAC960 PD Series Error Status Register.
+ */
+#define DAC960_PD_ERRSTS_PENDING 0x04
+
+typedef int (*myrb_hw_init_t)(struct pci_dev *pdev,
+			      struct myrb_hba *cb, void __iomem *base);
+typedef unsigned short (*mbox_mmio_init_t)(struct pci_dev *pdev,
+					   void __iomem *base,
+					   union myrb_cmd_mbox *mbox);
+
+struct myrb_privdata {
+	myrb_hw_init_t		hw_init;
+	irq_handler_t		irq_handler;
+	unsigned int		mmio_size;
+};
+
+#endif /* MYRB_H */