summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/ncr53c8xx.h
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/scsi/ncr53c8xx.h
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/scsi/ncr53c8xx.h')
-rw-r--r--drivers/scsi/ncr53c8xx.h1303
1 files changed, 1303 insertions, 0 deletions
diff --git a/drivers/scsi/ncr53c8xx.h b/drivers/scsi/ncr53c8xx.h
new file mode 100644
index 0000000000..be38c90285
--- /dev/null
+++ b/drivers/scsi/ncr53c8xx.h
@@ -0,0 +1,1303 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/******************************************************************************
+** Device driver for the PCI-SCSI NCR538XX controller family.
+**
+** Copyright (C) 1994 Wolfgang Stanglmeier
+** Copyright (C) 1998-2001 Gerard Roudier <groudier@free.fr>
+**
+**
+**-----------------------------------------------------------------------------
+**
+** This driver has been ported to Linux from the FreeBSD NCR53C8XX driver
+** and is currently maintained by
+**
+** Gerard Roudier <groudier@free.fr>
+**
+** Being given that this driver originates from the FreeBSD version, and
+** in order to keep synergy on both, any suggested enhancements and corrections
+** received on Linux are automatically a potential candidate for the FreeBSD
+** version.
+**
+** The original driver has been written for 386bsd and FreeBSD by
+** Wolfgang Stanglmeier <wolf@cologne.de>
+** Stefan Esser <se@mi.Uni-Koeln.de>
+**
+** And has been ported to NetBSD by
+** Charles M. Hannum <mycroft@gnu.ai.mit.edu>
+**
+** NVRAM detection and reading.
+** Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
+**
+** Added support for MIPS big endian systems.
+** Carsten Langgaard, carstenl@mips.com
+** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+**
+** Added support for HP PARISC big endian systems.
+** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+**
+*******************************************************************************
+*/
+
+#ifndef NCR53C8XX_H
+#define NCR53C8XX_H
+
+#include <scsi/scsi_host.h>
+
+
+/*
+** If you want a driver as small as possible, donnot define the
+** following options.
+*/
+#define SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
+#define SCSI_NCR_DEBUG_INFO_SUPPORT
+
+/*
+** To disable integrity checking, do not define the
+** following option.
+*/
+#ifdef CONFIG_SCSI_NCR53C8XX_INTEGRITY_CHECK
+# define SCSI_NCR_ENABLE_INTEGRITY_CHECK
+#endif
+
+/* ---------------------------------------------------------------------
+** Take into account kernel configured parameters.
+** Most of these options can be overridden at startup by a command line.
+** ---------------------------------------------------------------------
+*/
+
+/*
+ * For Ultra2 and Ultra3 SCSI support option, use special features.
+ *
+ * Value (default) means:
+ * bit 0 : all features enabled, except:
+ * bit 1 : PCI Write And Invalidate.
+ * bit 2 : Data Phase Mismatch handling from SCRIPTS.
+ *
+ * Use boot options ncr53c8xx=specf:1 if you want all chip features to be
+ * enabled by the driver.
+ */
+#define SCSI_NCR_SETUP_SPECIAL_FEATURES (3)
+
+#define SCSI_NCR_MAX_SYNC (80)
+
+/*
+ * Allow tags from 2 to 256, default 8
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_MAX_TAGS
+#if CONFIG_SCSI_NCR53C8XX_MAX_TAGS < 2
+#define SCSI_NCR_MAX_TAGS (2)
+#elif CONFIG_SCSI_NCR53C8XX_MAX_TAGS > 256
+#define SCSI_NCR_MAX_TAGS (256)
+#else
+#define SCSI_NCR_MAX_TAGS CONFIG_SCSI_NCR53C8XX_MAX_TAGS
+#endif
+#else
+#define SCSI_NCR_MAX_TAGS (8)
+#endif
+
+/*
+ * Allow tagged command queuing support if configured with default number
+ * of tags set to max (see above).
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
+#define SCSI_NCR_SETUP_DEFAULT_TAGS CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
+#elif defined CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE
+#define SCSI_NCR_SETUP_DEFAULT_TAGS SCSI_NCR_MAX_TAGS
+#else
+#define SCSI_NCR_SETUP_DEFAULT_TAGS (0)
+#endif
+
+/*
+ * Immediate arbitration
+ */
+#if defined(CONFIG_SCSI_NCR53C8XX_IARB)
+#define SCSI_NCR_IARB_SUPPORT
+#endif
+
+/*
+ * Sync transfer frequency at startup.
+ * Allow from 5Mhz to 80Mhz default 20 Mhz.
+ */
+#ifndef CONFIG_SCSI_NCR53C8XX_SYNC
+#define CONFIG_SCSI_NCR53C8XX_SYNC (20)
+#elif CONFIG_SCSI_NCR53C8XX_SYNC > SCSI_NCR_MAX_SYNC
+#undef CONFIG_SCSI_NCR53C8XX_SYNC
+#define CONFIG_SCSI_NCR53C8XX_SYNC SCSI_NCR_MAX_SYNC
+#endif
+
+#if CONFIG_SCSI_NCR53C8XX_SYNC == 0
+#define SCSI_NCR_SETUP_DEFAULT_SYNC (255)
+#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 5
+#define SCSI_NCR_SETUP_DEFAULT_SYNC (50)
+#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 20
+#define SCSI_NCR_SETUP_DEFAULT_SYNC (250/(CONFIG_SCSI_NCR53C8XX_SYNC))
+#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 33
+#define SCSI_NCR_SETUP_DEFAULT_SYNC (11)
+#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 40
+#define SCSI_NCR_SETUP_DEFAULT_SYNC (10)
+#else
+#define SCSI_NCR_SETUP_DEFAULT_SYNC (9)
+#endif
+
+/*
+ * Disallow disconnections at boot-up
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT
+#define SCSI_NCR_SETUP_DISCONNECTION (0)
+#else
+#define SCSI_NCR_SETUP_DISCONNECTION (1)
+#endif
+
+/*
+ * Force synchronous negotiation for all targets
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_FORCE_SYNC_NEGO
+#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (1)
+#else
+#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (0)
+#endif
+
+/*
+ * Disable master parity checking (flawed hardwares need that)
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_MPARITY_CHECK
+#define SCSI_NCR_SETUP_MASTER_PARITY (0)
+#else
+#define SCSI_NCR_SETUP_MASTER_PARITY (1)
+#endif
+
+/*
+ * Disable scsi parity checking (flawed devices may need that)
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_PARITY_CHECK
+#define SCSI_NCR_SETUP_SCSI_PARITY (0)
+#else
+#define SCSI_NCR_SETUP_SCSI_PARITY (1)
+#endif
+
+/*
+ * Settle time after reset at boot-up
+ */
+#define SCSI_NCR_SETUP_SETTLE_TIME (2)
+
+/*
+** Bridge quirks work-around option defaulted to 1.
+*/
+#ifndef SCSI_NCR_PCIQ_WORK_AROUND_OPT
+#define SCSI_NCR_PCIQ_WORK_AROUND_OPT 1
+#endif
+
+/*
+** Work-around common bridge misbehaviour.
+**
+** - Do not flush posted writes in the opposite
+** direction on read.
+** - May reorder DMA writes to memory.
+**
+** This option should not affect performances
+** significantly, so it is the default.
+*/
+#if SCSI_NCR_PCIQ_WORK_AROUND_OPT == 1
+#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
+#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES
+#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
+
+/*
+** Same as option 1, but also deal with
+** misconfigured interrupts.
+**
+** - Edge triggered instead of level sensitive.
+** - No interrupt line connected.
+** - IRQ number misconfigured.
+**
+** If no interrupt is delivered, the driver will
+** catch the interrupt conditions 10 times per
+** second. No need to say that this option is
+** not recommended.
+*/
+#elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 2
+#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
+#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES
+#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
+#define SCSI_NCR_PCIQ_BROKEN_INTR
+
+/*
+** Some bridge designers decided to flush
+** everything prior to deliver the interrupt.
+** This option tries to deal with such a
+** behaviour.
+*/
+#elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 3
+#define SCSI_NCR_PCIQ_SYNC_ON_INTR
+#endif
+
+/*
+** Other parameters not configurable with "make config"
+** Avoid to change these constants, unless you know what you are doing.
+*/
+
+#define SCSI_NCR_ALWAYS_SIMPLE_TAG
+#define SCSI_NCR_MAX_SCATTER (127)
+#define SCSI_NCR_MAX_TARGET (16)
+
+/*
+** Compute some desirable value for CAN_QUEUE
+** and CMD_PER_LUN.
+** The driver will use lower values if these
+** ones appear to be too large.
+*/
+#define SCSI_NCR_CAN_QUEUE (8*SCSI_NCR_MAX_TAGS + 2*SCSI_NCR_MAX_TARGET)
+#define SCSI_NCR_CMD_PER_LUN (SCSI_NCR_MAX_TAGS)
+
+#define SCSI_NCR_SG_TABLESIZE (SCSI_NCR_MAX_SCATTER)
+#define SCSI_NCR_TIMER_INTERVAL (HZ)
+
+#define SCSI_NCR_MAX_LUN (16)
+
+/*
+ * IO functions definition for big/little endian CPU support.
+ * For now, the NCR is only supported in little endian addressing mode,
+ */
+
+#ifdef __BIG_ENDIAN
+
+#define inw_l2b inw
+#define inl_l2b inl
+#define outw_b2l outw
+#define outl_b2l outl
+
+#define readb_raw readb
+#define writeb_raw writeb
+
+#if defined(SCSI_NCR_BIG_ENDIAN)
+#define readw_l2b __raw_readw
+#define readl_l2b __raw_readl
+#define writew_b2l __raw_writew
+#define writel_b2l __raw_writel
+#define readw_raw __raw_readw
+#define readl_raw __raw_readl
+#define writew_raw __raw_writew
+#define writel_raw __raw_writel
+#else /* Other big-endian */
+#define readw_l2b readw
+#define readl_l2b readl
+#define writew_b2l writew
+#define writel_b2l writel
+#define readw_raw readw
+#define readl_raw readl
+#define writew_raw writew
+#define writel_raw writel
+#endif
+
+#else /* little endian */
+
+#define inw_raw inw
+#define inl_raw inl
+#define outw_raw outw
+#define outl_raw outl
+
+#define readb_raw readb
+#define readw_raw readw
+#define readl_raw readl
+#define writeb_raw writeb
+#define writew_raw writew
+#define writel_raw writel
+
+#endif
+
+#if !defined(__hppa__) && !defined(__mips__)
+#ifdef SCSI_NCR_BIG_ENDIAN
+#error "The NCR in BIG ENDIAN addressing mode is not (yet) supported"
+#endif
+#endif
+
+#define MEMORY_BARRIER() mb()
+
+
+/*
+ * If the NCR uses big endian addressing mode over the
+ * PCI, actual io register addresses for byte and word
+ * accesses must be changed according to lane routing.
+ * Btw, ncr_offb() and ncr_offw() macros only apply to
+ * constants and so donnot generate bloated code.
+ */
+
+#if defined(SCSI_NCR_BIG_ENDIAN)
+
+#define ncr_offb(o) (((o)&~3)+((~((o)&3))&3))
+#define ncr_offw(o) (((o)&~3)+((~((o)&3))&2))
+
+#else
+
+#define ncr_offb(o) (o)
+#define ncr_offw(o) (o)
+
+#endif
+
+/*
+ * If the CPU and the NCR use same endian-ness addressing,
+ * no byte reordering is needed for script patching.
+ * Macro cpu_to_scr() is to be used for script patching.
+ * Macro scr_to_cpu() is to be used for getting a DWORD
+ * from the script.
+ */
+
+#if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
+
+#define cpu_to_scr(dw) cpu_to_le32(dw)
+#define scr_to_cpu(dw) le32_to_cpu(dw)
+
+#elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
+
+#define cpu_to_scr(dw) cpu_to_be32(dw)
+#define scr_to_cpu(dw) be32_to_cpu(dw)
+
+#else
+
+#define cpu_to_scr(dw) (dw)
+#define scr_to_cpu(dw) (dw)
+
+#endif
+
+/*
+ * Access to the controller chip.
+ *
+ * If the CPU and the NCR use same endian-ness addressing,
+ * no byte reordering is needed for accessing chip io
+ * registers. Functions suffixed by '_raw' are assumed
+ * to access the chip over the PCI without doing byte
+ * reordering. Functions suffixed by '_l2b' are
+ * assumed to perform little-endian to big-endian byte
+ * reordering, those suffixed by '_b2l' blah, blah,
+ * blah, ...
+ */
+
+/*
+ * MEMORY mapped IO input / output
+ */
+
+#define INB_OFF(o) readb_raw((char __iomem *)np->reg + ncr_offb(o))
+#define OUTB_OFF(o, val) writeb_raw((val), (char __iomem *)np->reg + ncr_offb(o))
+
+#if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
+
+#define INW_OFF(o) readw_l2b((char __iomem *)np->reg + ncr_offw(o))
+#define INL_OFF(o) readl_l2b((char __iomem *)np->reg + (o))
+
+#define OUTW_OFF(o, val) writew_b2l((val), (char __iomem *)np->reg + ncr_offw(o))
+#define OUTL_OFF(o, val) writel_b2l((val), (char __iomem *)np->reg + (o))
+
+#elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
+
+#define INW_OFF(o) readw_b2l((char __iomem *)np->reg + ncr_offw(o))
+#define INL_OFF(o) readl_b2l((char __iomem *)np->reg + (o))
+
+#define OUTW_OFF(o, val) writew_l2b((val), (char __iomem *)np->reg + ncr_offw(o))
+#define OUTL_OFF(o, val) writel_l2b((val), (char __iomem *)np->reg + (o))
+
+#else
+
+#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
+/* Only 8 or 32 bit transfers allowed */
+#define INW_OFF(o) (readb((char __iomem *)np->reg + ncr_offw(o)) << 8 | readb((char __iomem *)np->reg + ncr_offw(o) + 1))
+#else
+#define INW_OFF(o) readw_raw((char __iomem *)np->reg + ncr_offw(o))
+#endif
+#define INL_OFF(o) readl_raw((char __iomem *)np->reg + (o))
+
+#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
+/* Only 8 or 32 bit transfers allowed */
+#define OUTW_OFF(o, val) do { writeb((char)((val) >> 8), (char __iomem *)np->reg + ncr_offw(o)); writeb((char)(val), (char __iomem *)np->reg + ncr_offw(o) + 1); } while (0)
+#else
+#define OUTW_OFF(o, val) writew_raw((val), (char __iomem *)np->reg + ncr_offw(o))
+#endif
+#define OUTL_OFF(o, val) writel_raw((val), (char __iomem *)np->reg + (o))
+
+#endif
+
+#define INB(r) INB_OFF (offsetof(struct ncr_reg,r))
+#define INW(r) INW_OFF (offsetof(struct ncr_reg,r))
+#define INL(r) INL_OFF (offsetof(struct ncr_reg,r))
+
+#define OUTB(r, val) OUTB_OFF (offsetof(struct ncr_reg,r), (val))
+#define OUTW(r, val) OUTW_OFF (offsetof(struct ncr_reg,r), (val))
+#define OUTL(r, val) OUTL_OFF (offsetof(struct ncr_reg,r), (val))
+
+/*
+ * Set bit field ON, OFF
+ */
+
+#define OUTONB(r, m) OUTB(r, INB(r) | (m))
+#define OUTOFFB(r, m) OUTB(r, INB(r) & ~(m))
+#define OUTONW(r, m) OUTW(r, INW(r) | (m))
+#define OUTOFFW(r, m) OUTW(r, INW(r) & ~(m))
+#define OUTONL(r, m) OUTL(r, INL(r) | (m))
+#define OUTOFFL(r, m) OUTL(r, INL(r) & ~(m))
+
+/*
+ * We normally want the chip to have a consistent view
+ * of driver internal data structures when we restart it.
+ * Thus these macros.
+ */
+#define OUTL_DSP(v) \
+ do { \
+ MEMORY_BARRIER(); \
+ OUTL (nc_dsp, (v)); \
+ } while (0)
+
+#define OUTONB_STD() \
+ do { \
+ MEMORY_BARRIER(); \
+ OUTONB (nc_dcntl, (STD|NOCOM)); \
+ } while (0)
+
+
+/*
+** NCR53C8XX devices features table.
+*/
+struct ncr_chip {
+ unsigned short revision_id;
+ unsigned char burst_max; /* log-base-2 of max burst */
+ unsigned char offset_max;
+ unsigned char nr_divisor;
+ unsigned int features;
+#define FE_LED0 (1<<0)
+#define FE_WIDE (1<<1) /* Wide data transfers */
+#define FE_ULTRA (1<<2) /* Ultra speed 20Mtrans/sec */
+#define FE_DBLR (1<<4) /* Clock doubler present */
+#define FE_QUAD (1<<5) /* Clock quadrupler present */
+#define FE_ERL (1<<6) /* Enable read line */
+#define FE_CLSE (1<<7) /* Cache line size enable */
+#define FE_WRIE (1<<8) /* Write & Invalidate enable */
+#define FE_ERMP (1<<9) /* Enable read multiple */
+#define FE_BOF (1<<10) /* Burst opcode fetch */
+#define FE_DFS (1<<11) /* DMA fifo size */
+#define FE_PFEN (1<<12) /* Prefetch enable */
+#define FE_LDSTR (1<<13) /* Load/Store supported */
+#define FE_RAM (1<<14) /* On chip RAM present */
+#define FE_VARCLK (1<<15) /* SCSI clock may vary */
+#define FE_RAM8K (1<<16) /* On chip RAM sized 8Kb */
+#define FE_64BIT (1<<17) /* Have a 64-bit PCI interface */
+#define FE_IO256 (1<<18) /* Requires full 256 bytes in PCI space */
+#define FE_NOPM (1<<19) /* Scripts handles phase mismatch */
+#define FE_LEDC (1<<20) /* Hardware control of LED */
+#define FE_DIFF (1<<21) /* Support Differential SCSI */
+#define FE_66MHZ (1<<23) /* 66MHz PCI Support */
+#define FE_DAC (1<<24) /* Support DAC cycles (64 bit addressing) */
+#define FE_ISTAT1 (1<<25) /* Have ISTAT1, MBOX0, MBOX1 registers */
+#define FE_DAC_IN_USE (1<<26) /* Platform does DAC cycles */
+#define FE_EHP (1<<27) /* 720: Even host parity */
+#define FE_MUX (1<<28) /* 720: Multiplexed bus */
+#define FE_EA (1<<29) /* 720: Enable Ack */
+
+#define FE_CACHE_SET (FE_ERL|FE_CLSE|FE_WRIE|FE_ERMP)
+#define FE_SCSI_SET (FE_WIDE|FE_ULTRA|FE_DBLR|FE_QUAD|F_CLK80)
+#define FE_SPECIAL_SET (FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM)
+};
+
+
+/*
+** Driver setup structure.
+**
+** This structure is initialized from linux config options.
+** It can be overridden at boot-up by the boot command line.
+*/
+#define SCSI_NCR_MAX_EXCLUDES 8
+struct ncr_driver_setup {
+ u8 master_parity;
+ u8 scsi_parity;
+ u8 disconnection;
+ u8 special_features;
+ u8 force_sync_nego;
+ u8 reverse_probe;
+ u8 pci_fix_up;
+ u8 use_nvram;
+ u8 verbose;
+ u8 default_tags;
+ u16 default_sync;
+ u16 debug;
+ u8 burst_max;
+ u8 led_pin;
+ u8 max_wide;
+ u8 settle_delay;
+ u8 diff_support;
+ u8 irqm;
+ u8 bus_check;
+ u8 optimize;
+ u8 recovery;
+ u8 host_id;
+ u16 iarb;
+ u32 excludes[SCSI_NCR_MAX_EXCLUDES];
+ char tag_ctrl[100];
+};
+
+/*
+** Initial setup.
+** Can be overridden at startup by a command line.
+*/
+#define SCSI_NCR_DRIVER_SETUP \
+{ \
+ SCSI_NCR_SETUP_MASTER_PARITY, \
+ SCSI_NCR_SETUP_SCSI_PARITY, \
+ SCSI_NCR_SETUP_DISCONNECTION, \
+ SCSI_NCR_SETUP_SPECIAL_FEATURES, \
+ SCSI_NCR_SETUP_FORCE_SYNC_NEGO, \
+ 0, \
+ 0, \
+ 1, \
+ 0, \
+ SCSI_NCR_SETUP_DEFAULT_TAGS, \
+ SCSI_NCR_SETUP_DEFAULT_SYNC, \
+ 0x00, \
+ 7, \
+ 0, \
+ 1, \
+ SCSI_NCR_SETUP_SETTLE_TIME, \
+ 0, \
+ 0, \
+ 1, \
+ 0, \
+ 0, \
+ 255, \
+ 0x00 \
+}
+
+/*
+** Boot fail safe setup.
+** Override initial setup from boot command line:
+** ncr53c8xx=safe:y
+*/
+#define SCSI_NCR_DRIVER_SAFE_SETUP \
+{ \
+ 0, \
+ 1, \
+ 0, \
+ 0, \
+ 0, \
+ 0, \
+ 0, \
+ 1, \
+ 2, \
+ 0, \
+ 255, \
+ 0x00, \
+ 255, \
+ 0, \
+ 0, \
+ 10, \
+ 1, \
+ 1, \
+ 1, \
+ 0, \
+ 0, \
+ 255 \
+}
+
+/**************** ORIGINAL CONTENT of ncrreg.h from FreeBSD ******************/
+
+/*-----------------------------------------------------------------
+**
+** The ncr 53c810 register structure.
+**
+**-----------------------------------------------------------------
+*/
+
+struct ncr_reg {
+/*00*/ u8 nc_scntl0; /* full arb., ena parity, par->ATN */
+
+/*01*/ u8 nc_scntl1; /* no reset */
+ #define ISCON 0x10 /* connected to scsi */
+ #define CRST 0x08 /* force reset */
+ #define IARB 0x02 /* immediate arbitration */
+
+/*02*/ u8 nc_scntl2; /* no disconnect expected */
+ #define SDU 0x80 /* cmd: disconnect will raise error */
+ #define CHM 0x40 /* sta: chained mode */
+ #define WSS 0x08 /* sta: wide scsi send [W]*/
+ #define WSR 0x01 /* sta: wide scsi received [W]*/
+
+/*03*/ u8 nc_scntl3; /* cnf system clock dependent */
+ #define EWS 0x08 /* cmd: enable wide scsi [W]*/
+ #define ULTRA 0x80 /* cmd: ULTRA enable */
+ /* bits 0-2, 7 rsvd for C1010 */
+
+/*04*/ u8 nc_scid; /* cnf host adapter scsi address */
+ #define RRE 0x40 /* r/w:e enable response to resel. */
+ #define SRE 0x20 /* r/w:e enable response to select */
+
+/*05*/ u8 nc_sxfer; /* ### Sync speed and count */
+ /* bits 6-7 rsvd for C1010 */
+
+/*06*/ u8 nc_sdid; /* ### Destination-ID */
+
+/*07*/ u8 nc_gpreg; /* ??? IO-Pins */
+
+/*08*/ u8 nc_sfbr; /* ### First byte in phase */
+
+/*09*/ u8 nc_socl;
+ #define CREQ 0x80 /* r/w: SCSI-REQ */
+ #define CACK 0x40 /* r/w: SCSI-ACK */
+ #define CBSY 0x20 /* r/w: SCSI-BSY */
+ #define CSEL 0x10 /* r/w: SCSI-SEL */
+ #define CATN 0x08 /* r/w: SCSI-ATN */
+ #define CMSG 0x04 /* r/w: SCSI-MSG */
+ #define CC_D 0x02 /* r/w: SCSI-C_D */
+ #define CI_O 0x01 /* r/w: SCSI-I_O */
+
+/*0a*/ u8 nc_ssid;
+
+/*0b*/ u8 nc_sbcl;
+
+/*0c*/ u8 nc_dstat;
+ #define DFE 0x80 /* sta: dma fifo empty */
+ #define MDPE 0x40 /* int: master data parity error */
+ #define BF 0x20 /* int: script: bus fault */
+ #define ABRT 0x10 /* int: script: command aborted */
+ #define SSI 0x08 /* int: script: single step */
+ #define SIR 0x04 /* int: script: interrupt instruct. */
+ #define IID 0x01 /* int: script: illegal instruct. */
+
+/*0d*/ u8 nc_sstat0;
+ #define ILF 0x80 /* sta: data in SIDL register lsb */
+ #define ORF 0x40 /* sta: data in SODR register lsb */
+ #define OLF 0x20 /* sta: data in SODL register lsb */
+ #define AIP 0x10 /* sta: arbitration in progress */
+ #define LOA 0x08 /* sta: arbitration lost */
+ #define WOA 0x04 /* sta: arbitration won */
+ #define IRST 0x02 /* sta: scsi reset signal */
+ #define SDP 0x01 /* sta: scsi parity signal */
+
+/*0e*/ u8 nc_sstat1;
+ #define FF3210 0xf0 /* sta: bytes in the scsi fifo */
+
+/*0f*/ u8 nc_sstat2;
+ #define ILF1 0x80 /* sta: data in SIDL register msb[W]*/
+ #define ORF1 0x40 /* sta: data in SODR register msb[W]*/
+ #define OLF1 0x20 /* sta: data in SODL register msb[W]*/
+ #define DM 0x04 /* sta: DIFFSENS mismatch (895/6 only) */
+ #define LDSC 0x02 /* sta: disconnect & reconnect */
+
+/*10*/ u8 nc_dsa; /* --> Base page */
+/*11*/ u8 nc_dsa1;
+/*12*/ u8 nc_dsa2;
+/*13*/ u8 nc_dsa3;
+
+/*14*/ u8 nc_istat; /* --> Main Command and status */
+ #define CABRT 0x80 /* cmd: abort current operation */
+ #define SRST 0x40 /* mod: reset chip */
+ #define SIGP 0x20 /* r/w: message from host to ncr */
+ #define SEM 0x10 /* r/w: message between host + ncr */
+ #define CON 0x08 /* sta: connected to scsi */
+ #define INTF 0x04 /* sta: int on the fly (reset by wr)*/
+ #define SIP 0x02 /* sta: scsi-interrupt */
+ #define DIP 0x01 /* sta: host/script interrupt */
+
+/*15*/ u8 nc_istat1; /* 896 and later cores only */
+ #define FLSH 0x04 /* sta: chip is flushing */
+ #define SRUN 0x02 /* sta: scripts are running */
+ #define SIRQD 0x01 /* r/w: disable INT pin */
+
+/*16*/ u8 nc_mbox0; /* 896 and later cores only */
+/*17*/ u8 nc_mbox1; /* 896 and later cores only */
+
+/*18*/ u8 nc_ctest0;
+ #define EHP 0x04 /* 720 even host parity */
+/*19*/ u8 nc_ctest1;
+
+/*1a*/ u8 nc_ctest2;
+ #define CSIGP 0x40
+ /* bits 0-2,7 rsvd for C1010 */
+
+/*1b*/ u8 nc_ctest3;
+ #define FLF 0x08 /* cmd: flush dma fifo */
+ #define CLF 0x04 /* cmd: clear dma fifo */
+ #define FM 0x02 /* mod: fetch pin mode */
+ #define WRIE 0x01 /* mod: write and invalidate enable */
+ /* bits 4-7 rsvd for C1010 */
+
+/*1c*/ u32 nc_temp; /* ### Temporary stack */
+
+/*20*/ u8 nc_dfifo;
+/*21*/ u8 nc_ctest4;
+ #define MUX 0x80 /* 720 host bus multiplex mode */
+ #define BDIS 0x80 /* mod: burst disable */
+ #define MPEE 0x08 /* mod: master parity error enable */
+
+/*22*/ u8 nc_ctest5;
+ #define DFS 0x20 /* mod: dma fifo size */
+ /* bits 0-1, 3-7 rsvd for C1010 */
+/*23*/ u8 nc_ctest6;
+
+/*24*/ u32 nc_dbc; /* ### Byte count and command */
+/*28*/ u32 nc_dnad; /* ### Next command register */
+/*2c*/ u32 nc_dsp; /* --> Script Pointer */
+/*30*/ u32 nc_dsps; /* --> Script pointer save/opcode#2 */
+
+/*34*/ u8 nc_scratcha; /* Temporary register a */
+/*35*/ u8 nc_scratcha1;
+/*36*/ u8 nc_scratcha2;
+/*37*/ u8 nc_scratcha3;
+
+/*38*/ u8 nc_dmode;
+ #define BL_2 0x80 /* mod: burst length shift value +2 */
+ #define BL_1 0x40 /* mod: burst length shift value +1 */
+ #define ERL 0x08 /* mod: enable read line */
+ #define ERMP 0x04 /* mod: enable read multiple */
+ #define BOF 0x02 /* mod: burst op code fetch */
+
+/*39*/ u8 nc_dien;
+/*3a*/ u8 nc_sbr;
+
+/*3b*/ u8 nc_dcntl; /* --> Script execution control */
+ #define CLSE 0x80 /* mod: cache line size enable */
+ #define PFF 0x40 /* cmd: pre-fetch flush */
+ #define PFEN 0x20 /* mod: pre-fetch enable */
+ #define EA 0x20 /* mod: 720 enable-ack */
+ #define SSM 0x10 /* mod: single step mode */
+ #define IRQM 0x08 /* mod: irq mode (1 = totem pole !) */
+ #define STD 0x04 /* cmd: start dma mode */
+ #define IRQD 0x02 /* mod: irq disable */
+ #define NOCOM 0x01 /* cmd: protect sfbr while reselect */
+ /* bits 0-1 rsvd for C1010 */
+
+/*3c*/ u32 nc_adder;
+
+/*40*/ u16 nc_sien; /* -->: interrupt enable */
+/*42*/ u16 nc_sist; /* <--: interrupt status */
+ #define SBMC 0x1000/* sta: SCSI Bus Mode Change (895/6 only) */
+ #define STO 0x0400/* sta: timeout (select) */
+ #define GEN 0x0200/* sta: timeout (general) */
+ #define HTH 0x0100/* sta: timeout (handshake) */
+ #define MA 0x80 /* sta: phase mismatch */
+ #define CMP 0x40 /* sta: arbitration complete */
+ #define SEL 0x20 /* sta: selected by another device */
+ #define RSL 0x10 /* sta: reselected by another device*/
+ #define SGE 0x08 /* sta: gross error (over/underflow)*/
+ #define UDC 0x04 /* sta: unexpected disconnect */
+ #define RST 0x02 /* sta: scsi bus reset detected */
+ #define PAR 0x01 /* sta: scsi parity error */
+
+/*44*/ u8 nc_slpar;
+/*45*/ u8 nc_swide;
+/*46*/ u8 nc_macntl;
+/*47*/ u8 nc_gpcntl;
+/*48*/ u8 nc_stime0; /* cmd: timeout for select&handshake*/
+/*49*/ u8 nc_stime1; /* cmd: timeout user defined */
+/*4a*/ u16 nc_respid; /* sta: Reselect-IDs */
+
+/*4c*/ u8 nc_stest0;
+
+/*4d*/ u8 nc_stest1;
+ #define SCLK 0x80 /* Use the PCI clock as SCSI clock */
+ #define DBLEN 0x08 /* clock doubler running */
+ #define DBLSEL 0x04 /* clock doubler selected */
+
+
+/*4e*/ u8 nc_stest2;
+ #define ROF 0x40 /* reset scsi offset (after gross error!) */
+ #define DIF 0x20 /* 720 SCSI differential mode */
+ #define EXT 0x02 /* extended filtering */
+
+/*4f*/ u8 nc_stest3;
+ #define TE 0x80 /* c: tolerAnt enable */
+ #define HSC 0x20 /* c: Halt SCSI Clock */
+ #define CSF 0x02 /* c: clear scsi fifo */
+
+/*50*/ u16 nc_sidl; /* Lowlevel: latched from scsi data */
+/*52*/ u8 nc_stest4;
+ #define SMODE 0xc0 /* SCSI bus mode (895/6 only) */
+ #define SMODE_HVD 0x40 /* High Voltage Differential */
+ #define SMODE_SE 0x80 /* Single Ended */
+ #define SMODE_LVD 0xc0 /* Low Voltage Differential */
+ #define LCKFRQ 0x20 /* Frequency Lock (895/6 only) */
+ /* bits 0-5 rsvd for C1010 */
+
+/*53*/ u8 nc_53_;
+/*54*/ u16 nc_sodl; /* Lowlevel: data out to scsi data */
+/*56*/ u8 nc_ccntl0; /* Chip Control 0 (896) */
+ #define ENPMJ 0x80 /* Enable Phase Mismatch Jump */
+ #define PMJCTL 0x40 /* Phase Mismatch Jump Control */
+ #define ENNDJ 0x20 /* Enable Non Data PM Jump */
+ #define DISFC 0x10 /* Disable Auto FIFO Clear */
+ #define DILS 0x02 /* Disable Internal Load/Store */
+ #define DPR 0x01 /* Disable Pipe Req */
+
+/*57*/ u8 nc_ccntl1; /* Chip Control 1 (896) */
+ #define ZMOD 0x80 /* High Impedance Mode */
+ #define DIC 0x10 /* Disable Internal Cycles */
+ #define DDAC 0x08 /* Disable Dual Address Cycle */
+ #define XTIMOD 0x04 /* 64-bit Table Ind. Indexing Mode */
+ #define EXTIBMV 0x02 /* Enable 64-bit Table Ind. BMOV */
+ #define EXDBMV 0x01 /* Enable 64-bit Direct BMOV */
+
+/*58*/ u16 nc_sbdl; /* Lowlevel: data from scsi data */
+/*5a*/ u16 nc_5a_;
+
+/*5c*/ u8 nc_scr0; /* Working register B */
+/*5d*/ u8 nc_scr1; /* */
+/*5e*/ u8 nc_scr2; /* */
+/*5f*/ u8 nc_scr3; /* */
+
+/*60*/ u8 nc_scrx[64]; /* Working register C-R */
+/*a0*/ u32 nc_mmrs; /* Memory Move Read Selector */
+/*a4*/ u32 nc_mmws; /* Memory Move Write Selector */
+/*a8*/ u32 nc_sfs; /* Script Fetch Selector */
+/*ac*/ u32 nc_drs; /* DSA Relative Selector */
+/*b0*/ u32 nc_sbms; /* Static Block Move Selector */
+/*b4*/ u32 nc_dbms; /* Dynamic Block Move Selector */
+/*b8*/ u32 nc_dnad64; /* DMA Next Address 64 */
+/*bc*/ u16 nc_scntl4; /* C1010 only */
+ #define U3EN 0x80 /* Enable Ultra 3 */
+ #define AIPEN 0x40 /* Allow check upper byte lanes */
+ #define XCLKH_DT 0x08 /* Extra clock of data hold on DT
+ transfer edge */
+ #define XCLKH_ST 0x04 /* Extra clock of data hold on ST
+ transfer edge */
+
+/*be*/ u8 nc_aipcntl0; /* Epat Control 1 C1010 only */
+/*bf*/ u8 nc_aipcntl1; /* AIP Control C1010_66 Only */
+
+/*c0*/ u32 nc_pmjad1; /* Phase Mismatch Jump Address 1 */
+/*c4*/ u32 nc_pmjad2; /* Phase Mismatch Jump Address 2 */
+/*c8*/ u8 nc_rbc; /* Remaining Byte Count */
+/*c9*/ u8 nc_rbc1; /* */
+/*ca*/ u8 nc_rbc2; /* */
+/*cb*/ u8 nc_rbc3; /* */
+
+/*cc*/ u8 nc_ua; /* Updated Address */
+/*cd*/ u8 nc_ua1; /* */
+/*ce*/ u8 nc_ua2; /* */
+/*cf*/ u8 nc_ua3; /* */
+/*d0*/ u32 nc_esa; /* Entry Storage Address */
+/*d4*/ u8 nc_ia; /* Instruction Address */
+/*d5*/ u8 nc_ia1;
+/*d6*/ u8 nc_ia2;
+/*d7*/ u8 nc_ia3;
+/*d8*/ u32 nc_sbc; /* SCSI Byte Count (3 bytes only) */
+/*dc*/ u32 nc_csbc; /* Cumulative SCSI Byte Count */
+
+ /* Following for C1010 only */
+/*e0*/ u16 nc_crcpad; /* CRC Value */
+/*e2*/ u8 nc_crccntl0; /* CRC control register */
+ #define SNDCRC 0x10 /* Send CRC Request */
+/*e3*/ u8 nc_crccntl1; /* CRC control register */
+/*e4*/ u32 nc_crcdata; /* CRC data register */
+/*e8*/ u32 nc_e8_; /* rsvd */
+/*ec*/ u32 nc_ec_; /* rsvd */
+/*f0*/ u16 nc_dfbc; /* DMA FIFO byte count */
+
+};
+
+/*-----------------------------------------------------------
+**
+** Utility macros for the script.
+**
+**-----------------------------------------------------------
+*/
+
+#define REGJ(p,r) (offsetof(struct ncr_reg, p ## r))
+#define REG(r) REGJ (nc_, r)
+
+typedef u32 ncrcmd;
+
+/*-----------------------------------------------------------
+**
+** SCSI phases
+**
+** DT phases illegal for ncr driver.
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_DATA_OUT 0x00000000
+#define SCR_DATA_IN 0x01000000
+#define SCR_COMMAND 0x02000000
+#define SCR_STATUS 0x03000000
+#define SCR_DT_DATA_OUT 0x04000000
+#define SCR_DT_DATA_IN 0x05000000
+#define SCR_MSG_OUT 0x06000000
+#define SCR_MSG_IN 0x07000000
+
+#define SCR_ILG_OUT 0x04000000
+#define SCR_ILG_IN 0x05000000
+
+/*-----------------------------------------------------------
+**
+** Data transfer via SCSI.
+**
+**-----------------------------------------------------------
+**
+** MOVE_ABS (LEN)
+** <<start address>>
+**
+** MOVE_IND (LEN)
+** <<dnad_offset>>
+**
+** MOVE_TBL
+** <<dnad_offset>>
+**
+**-----------------------------------------------------------
+*/
+
+#define OPC_MOVE 0x08000000
+
+#define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l))
+#define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l))
+#define SCR_MOVE_TBL (0x10000000 | OPC_MOVE)
+
+#define SCR_CHMOV_ABS(l) ((0x00000000) | (l))
+#define SCR_CHMOV_IND(l) ((0x20000000) | (l))
+#define SCR_CHMOV_TBL (0x10000000)
+
+struct scr_tblmove {
+ u32 size;
+ u32 addr;
+};
+
+/*-----------------------------------------------------------
+**
+** Selection
+**
+**-----------------------------------------------------------
+**
+** SEL_ABS | SCR_ID (0..15) [ | REL_JMP]
+** <<alternate_address>>
+**
+** SEL_TBL | << dnad_offset>> [ | REL_JMP]
+** <<alternate_address>>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_SEL_ABS 0x40000000
+#define SCR_SEL_ABS_ATN 0x41000000
+#define SCR_SEL_TBL 0x42000000
+#define SCR_SEL_TBL_ATN 0x43000000
+
+
+#ifdef SCSI_NCR_BIG_ENDIAN
+struct scr_tblsel {
+ u8 sel_scntl3;
+ u8 sel_id;
+ u8 sel_sxfer;
+ u8 sel_scntl4;
+};
+#else
+struct scr_tblsel {
+ u8 sel_scntl4;
+ u8 sel_sxfer;
+ u8 sel_id;
+ u8 sel_scntl3;
+};
+#endif
+
+#define SCR_JMP_REL 0x04000000
+#define SCR_ID(id) (((u32)(id)) << 16)
+
+/*-----------------------------------------------------------
+**
+** Waiting for Disconnect or Reselect
+**
+**-----------------------------------------------------------
+**
+** WAIT_DISC
+** dummy: <<alternate_address>>
+**
+** WAIT_RESEL
+** <<alternate_address>>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_WAIT_DISC 0x48000000
+#define SCR_WAIT_RESEL 0x50000000
+
+/*-----------------------------------------------------------
+**
+** Bit Set / Reset
+**
+**-----------------------------------------------------------
+**
+** SET (flags {|.. })
+**
+** CLR (flags {|.. })
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_SET(f) (0x58000000 | (f))
+#define SCR_CLR(f) (0x60000000 | (f))
+
+#define SCR_CARRY 0x00000400
+#define SCR_TRG 0x00000200
+#define SCR_ACK 0x00000040
+#define SCR_ATN 0x00000008
+
+
+
+
+/*-----------------------------------------------------------
+**
+** Memory to memory move
+**
+**-----------------------------------------------------------
+**
+** COPY (bytecount)
+** << source_address >>
+** << destination_address >>
+**
+** SCR_COPY sets the NO FLUSH option by default.
+** SCR_COPY_F does not set this option.
+**
+** For chips which do not support this option,
+** ncr_copy_and_bind() will remove this bit.
+**-----------------------------------------------------------
+*/
+
+#define SCR_NO_FLUSH 0x01000000
+
+#define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n))
+#define SCR_COPY_F(n) (0xc0000000 | (n))
+
+/*-----------------------------------------------------------
+**
+** Register move and binary operations
+**
+**-----------------------------------------------------------
+**
+** SFBR_REG (reg, op, data) reg = SFBR op data
+** << 0 >>
+**
+** REG_SFBR (reg, op, data) SFBR = reg op data
+** << 0 >>
+**
+** REG_REG (reg, op, data) reg = reg op data
+** << 0 >>
+**
+**-----------------------------------------------------------
+** On 810A, 860, 825A, 875, 895 and 896 chips the content
+** of SFBR register can be used as data (SCR_SFBR_DATA).
+** The 896 has additional IO registers starting at
+** offset 0x80. Bit 7 of register offset is stored in
+** bit 7 of the SCRIPTS instruction first DWORD.
+**-----------------------------------------------------------
+*/
+
+#define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul) + ((ofs) & 0x80))
+
+#define SCR_SFBR_REG(reg,op,data) \
+ (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
+
+#define SCR_REG_SFBR(reg,op,data) \
+ (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
+
+#define SCR_REG_REG(reg,op,data) \
+ (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
+
+
+#define SCR_LOAD 0x00000000
+#define SCR_SHL 0x01000000
+#define SCR_OR 0x02000000
+#define SCR_XOR 0x03000000
+#define SCR_AND 0x04000000
+#define SCR_SHR 0x05000000
+#define SCR_ADD 0x06000000
+#define SCR_ADDC 0x07000000
+
+#define SCR_SFBR_DATA (0x00800000>>8ul) /* Use SFBR as data */
+
+/*-----------------------------------------------------------
+**
+** FROM_REG (reg) SFBR = reg
+** << 0 >>
+**
+** TO_REG (reg) reg = SFBR
+** << 0 >>
+**
+** LOAD_REG (reg, data) reg = <data>
+** << 0 >>
+**
+** LOAD_SFBR(data) SFBR = <data>
+** << 0 >>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_FROM_REG(reg) \
+ SCR_REG_SFBR(reg,SCR_OR,0)
+
+#define SCR_TO_REG(reg) \
+ SCR_SFBR_REG(reg,SCR_OR,0)
+
+#define SCR_LOAD_REG(reg,data) \
+ SCR_REG_REG(reg,SCR_LOAD,data)
+
+#define SCR_LOAD_SFBR(data) \
+ (SCR_REG_SFBR (gpreg, SCR_LOAD, data))
+
+/*-----------------------------------------------------------
+**
+** LOAD from memory to register.
+** STORE from register to memory.
+**
+** Only supported by 810A, 860, 825A, 875, 895 and 896.
+**
+**-----------------------------------------------------------
+**
+** LOAD_ABS (LEN)
+** <<start address>>
+**
+** LOAD_REL (LEN) (DSA relative)
+** <<dsa_offset>>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul)
+#define SCR_NO_FLUSH2 0x02000000
+#define SCR_DSA_REL2 0x10000000
+
+#define SCR_LOAD_R(reg, how, n) \
+ (0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
+
+#define SCR_STORE_R(reg, how, n) \
+ (0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
+
+#define SCR_LOAD_ABS(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2, n)
+#define SCR_LOAD_REL(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n)
+#define SCR_LOAD_ABS_F(reg, n) SCR_LOAD_R(reg, 0, n)
+#define SCR_LOAD_REL_F(reg, n) SCR_LOAD_R(reg, SCR_DSA_REL2, n)
+
+#define SCR_STORE_ABS(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2, n)
+#define SCR_STORE_REL(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n)
+#define SCR_STORE_ABS_F(reg, n) SCR_STORE_R(reg, 0, n)
+#define SCR_STORE_REL_F(reg, n) SCR_STORE_R(reg, SCR_DSA_REL2, n)
+
+
+/*-----------------------------------------------------------
+**
+** Waiting for Disconnect or Reselect
+**
+**-----------------------------------------------------------
+**
+** JUMP [ | IFTRUE/IFFALSE ( ... ) ]
+** <<address>>
+**
+** JUMPR [ | IFTRUE/IFFALSE ( ... ) ]
+** <<distance>>
+**
+** CALL [ | IFTRUE/IFFALSE ( ... ) ]
+** <<address>>
+**
+** CALLR [ | IFTRUE/IFFALSE ( ... ) ]
+** <<distance>>
+**
+** RETURN [ | IFTRUE/IFFALSE ( ... ) ]
+** <<dummy>>
+**
+** INT [ | IFTRUE/IFFALSE ( ... ) ]
+** <<ident>>
+**
+** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ]
+** <<ident>>
+**
+** Conditions:
+** WHEN (phase)
+** IF (phase)
+** CARRYSET
+** DATA (data, mask)
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_NO_OP 0x80000000
+#define SCR_JUMP 0x80080000
+#define SCR_JUMP64 0x80480000
+#define SCR_JUMPR 0x80880000
+#define SCR_CALL 0x88080000
+#define SCR_CALLR 0x88880000
+#define SCR_RETURN 0x90080000
+#define SCR_INT 0x98080000
+#define SCR_INT_FLY 0x98180000
+
+#define IFFALSE(arg) (0x00080000 | (arg))
+#define IFTRUE(arg) (0x00000000 | (arg))
+
+#define WHEN(phase) (0x00030000 | (phase))
+#define IF(phase) (0x00020000 | (phase))
+
+#define DATA(D) (0x00040000 | ((D) & 0xff))
+#define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff))
+
+#define CARRYSET (0x00200000)
+
+/*-----------------------------------------------------------
+**
+** SCSI constants.
+**
+**-----------------------------------------------------------
+*/
+
+/*
+ * End of ncrreg from FreeBSD
+ */
+
+/*
+ Build a scatter/gather entry.
+ see sym53c8xx_2/sym_hipd.h for more detailed sym_build_sge()
+ implementation ;)
+ */
+
+#define ncr_build_sge(np, data, badd, len) \
+do { \
+ (data)->addr = cpu_to_scr(badd); \
+ (data)->size = cpu_to_scr(len); \
+} while (0)
+
+/*==========================================================
+**
+** Structures used by the detection routine to transmit
+** device configuration to the attach function.
+**
+**==========================================================
+*/
+struct ncr_slot {
+ u_long base;
+ u_long base_2;
+ u_long base_c;
+ u_long base_2_c;
+ void __iomem *base_v;
+ void __iomem *base_2_v;
+ int irq;
+/* port and reg fields to use INB, OUTB macros */
+ volatile struct ncr_reg __iomem *reg;
+};
+
+/*==========================================================
+**
+** Structure used by detection routine to save data on
+** each detected board for attach.
+**
+**==========================================================
+*/
+struct ncr_device {
+ struct device *dev;
+ struct ncr_slot slot;
+ struct ncr_chip chip;
+ u_char host_id;
+ u8 differential;
+};
+
+/* To keep track of the dma mapping (sg/single) that has been set */
+struct ncr_cmd_priv {
+ int data_mapped;
+ int data_mapping;
+};
+
+extern struct Scsi_Host *ncr_attach(struct scsi_host_template *tpnt, int unit, struct ncr_device *device);
+extern void ncr53c8xx_release(struct Scsi_Host *host);
+irqreturn_t ncr53c8xx_intr(int irq, void *dev_id);
+extern int ncr53c8xx_init(void);
+extern void ncr53c8xx_exit(void);
+
+#endif /* NCR53C8XX_H */