Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 366 insertions, 0 deletions

diff --git a/drivers/soc/aspeed/aspeed-lpc-ctrl.c b/drivers/soc/aspeed/aspeed-lpc-ctrl.c
new file mode 100644
index 0000000000..258894ed23
--- /dev/null
+++ b/drivers/soc/aspeed/aspeed-lpc-ctrl.c
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2017 IBM Corporation
+ */
+
+#include <linux/clk.h>
+#include <linux/log2.h>
+#include <linux/mfd/syscon.h>
+#include <linux/miscdevice.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/poll.h>
+#include <linux/regmap.h>
+
+#include <linux/aspeed-lpc-ctrl.h>
+
+#define DEVICE_NAME	"aspeed-lpc-ctrl"
+
+#define HICR5 0x80
+#define HICR5_ENL2H	BIT(8)
+#define HICR5_ENFWH	BIT(10)
+
+#define HICR6 0x84
+#define SW_FWH2AHB	BIT(17)
+
+#define HICR7 0x88
+#define HICR8 0x8c
+
+struct aspeed_lpc_ctrl {
+	struct miscdevice	miscdev;
+	struct regmap		*regmap;
+	struct clk		*clk;
+	phys_addr_t		mem_base;
+	resource_size_t		mem_size;
+	u32			pnor_size;
+	u32			pnor_base;
+	bool			fwh2ahb;
+	struct regmap		*scu;
+};
+
+static struct aspeed_lpc_ctrl *file_aspeed_lpc_ctrl(struct file *file)
+{
+	return container_of(file->private_data, struct aspeed_lpc_ctrl,
+			miscdev);
+}
+
+static int aspeed_lpc_ctrl_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file);
+	unsigned long vsize = vma->vm_end - vma->vm_start;
+	pgprot_t prot = vma->vm_page_prot;
+
+	if (vma->vm_pgoff + vma_pages(vma) > lpc_ctrl->mem_size >> PAGE_SHIFT)
+		return -EINVAL;
+
+	/* ast2400/2500 AHB accesses are not cache coherent */
+	prot = pgprot_noncached(prot);
+
+	if (remap_pfn_range(vma, vma->vm_start,
+		(lpc_ctrl->mem_base >> PAGE_SHIFT) + vma->vm_pgoff,
+		vsize, prot))
+		return -EAGAIN;
+
+	return 0;
+}
+
+static long aspeed_lpc_ctrl_ioctl(struct file *file, unsigned int cmd,
+		unsigned long param)
+{
+	struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file);
+	struct device *dev = file->private_data;
+	void __user *p = (void __user *)param;
+	struct aspeed_lpc_ctrl_mapping map;
+	u32 addr;
+	u32 size;
+	long rc;
+
+	if (copy_from_user(&map, p, sizeof(map)))
+		return -EFAULT;
+
+	if (map.flags != 0)
+		return -EINVAL;
+
+	switch (cmd) {
+	case ASPEED_LPC_CTRL_IOCTL_GET_SIZE:
+		/* The flash windows don't report their size */
+		if (map.window_type != ASPEED_LPC_CTRL_WINDOW_MEMORY)
+			return -EINVAL;
+
+		/* Support more than one window id in the future */
+		if (map.window_id != 0)
+			return -EINVAL;
+
+		/* If memory-region is not described in device tree */
+		if (!lpc_ctrl->mem_size) {
+			dev_dbg(dev, "Didn't find reserved memory\n");
+			return -ENXIO;
+		}
+
+		map.size = lpc_ctrl->mem_size;
+
+		return copy_to_user(p, &map, sizeof(map)) ? -EFAULT : 0;
+	case ASPEED_LPC_CTRL_IOCTL_MAP:
+
+		/*
+		 * The top half of HICR7 is the MSB of the BMC address of the
+		 * mapping.
+		 * The bottom half of HICR7 is the MSB of the HOST LPC
+		 * firmware space address of the mapping.
+		 *
+		 * The 1 bits in the top of half of HICR8 represent the bits
+		 * (in the requested address) that should be ignored and
+		 * replaced with those from the top half of HICR7.
+		 * The 1 bits in the bottom half of HICR8 represent the bits
+		 * (in the requested address) that should be kept and pass
+		 * into the BMC address space.
+		 */
+
+		/*
+		 * It doesn't make sense to talk about a size or offset with
+		 * low 16 bits set. Both HICR7 and HICR8 talk about the top 16
+		 * bits of addresses and sizes.
+		 */
+
+		if ((map.size & 0x0000ffff) || (map.offset & 0x0000ffff))
+			return -EINVAL;
+
+		/*
+		 * Because of the way the masks work in HICR8 offset has to
+		 * be a multiple of size.
+		 */
+		if (map.offset & (map.size - 1))
+			return -EINVAL;
+
+		if (map.window_type == ASPEED_LPC_CTRL_WINDOW_FLASH) {
+			if (!lpc_ctrl->pnor_size) {
+				dev_dbg(dev, "Didn't find host pnor flash\n");
+				return -ENXIO;
+			}
+			addr = lpc_ctrl->pnor_base;
+			size = lpc_ctrl->pnor_size;
+		} else if (map.window_type == ASPEED_LPC_CTRL_WINDOW_MEMORY) {
+			/* If memory-region is not described in device tree */
+			if (!lpc_ctrl->mem_size) {
+				dev_dbg(dev, "Didn't find reserved memory\n");
+				return -ENXIO;
+			}
+			addr = lpc_ctrl->mem_base;
+			size = lpc_ctrl->mem_size;
+		} else {
+			return -EINVAL;
+		}
+
+		/* Check overflow first! */
+		if (map.offset + map.size < map.offset ||
+			map.offset + map.size > size)
+			return -EINVAL;
+
+		if (map.size == 0 || map.size > size)
+			return -EINVAL;
+
+		addr += map.offset;
+
+		/*
+		 * addr (host lpc address) is safe regardless of values. This
+		 * simply changes the address the host has to request on its
+		 * side of the LPC bus. This cannot impact the hosts own
+		 * memory space by surprise as LPC specific accessors are
+		 * required. The only strange thing that could be done is
+		 * setting the lower 16 bits but the shift takes care of that.
+		 */
+
+		rc = regmap_write(lpc_ctrl->regmap, HICR7,
+				(addr | (map.addr >> 16)));
+		if (rc)
+			return rc;
+
+		rc = regmap_write(lpc_ctrl->regmap, HICR8,
+				(~(map.size - 1)) | ((map.size >> 16) - 1));
+		if (rc)
+			return rc;
+
+		/*
+		 * Switch to FWH2AHB mode, AST2600 only.
+		 */
+		if (lpc_ctrl->fwh2ahb) {
+			/*
+			 * Enable FWH2AHB in SCU debug control register 2. This
+			 * does not turn it on, but makes it available for it
+			 * to be configured in HICR6.
+			 */
+			regmap_update_bits(lpc_ctrl->scu, 0x0D8, BIT(2), 0);
+
+			/*
+			 * The other bits in this register are interrupt status bits
+			 * that are cleared by writing 1. As we don't want to clear
+			 * them, set only the bit of interest.
+			 */
+			regmap_write(lpc_ctrl->regmap, HICR6, SW_FWH2AHB);
+		}
+
+		/*
+		 * Enable LPC FHW cycles. This is required for the host to
+		 * access the regions specified.
+		 */
+		return regmap_update_bits(lpc_ctrl->regmap, HICR5,
+				HICR5_ENFWH | HICR5_ENL2H,
+				HICR5_ENFWH | HICR5_ENL2H);
+	}
+
+	return -EINVAL;
+}
+
+static const struct file_operations aspeed_lpc_ctrl_fops = {
+	.owner		= THIS_MODULE,
+	.mmap		= aspeed_lpc_ctrl_mmap,
+	.unlocked_ioctl	= aspeed_lpc_ctrl_ioctl,
+};
+
+static int aspeed_lpc_ctrl_probe(struct platform_device *pdev)
+{
+	struct aspeed_lpc_ctrl *lpc_ctrl;
+	struct device_node *node;
+	struct resource resm;
+	struct device *dev;
+	struct device_node *np;
+	int rc;
+
+	dev = &pdev->dev;
+
+	lpc_ctrl = devm_kzalloc(dev, sizeof(*lpc_ctrl), GFP_KERNEL);
+	if (!lpc_ctrl)
+		return -ENOMEM;
+
+	/* If flash is described in device tree then store */
+	node = of_parse_phandle(dev->of_node, "flash", 0);
+	if (!node) {
+		dev_dbg(dev, "Didn't find host pnor flash node\n");
+	} else {
+		rc = of_address_to_resource(node, 1, &resm);
+		of_node_put(node);
+		if (rc) {
+			dev_err(dev, "Couldn't address to resource for flash\n");
+			return rc;
+		}
+
+		lpc_ctrl->pnor_size = resource_size(&resm);
+		lpc_ctrl->pnor_base = resm.start;
+	}
+
+
+	dev_set_drvdata(&pdev->dev, lpc_ctrl);
+
+	/* If memory-region is described in device tree then store */
+	node = of_parse_phandle(dev->of_node, "memory-region", 0);
+	if (!node) {
+		dev_dbg(dev, "Didn't find reserved memory\n");
+	} else {
+		rc = of_address_to_resource(node, 0, &resm);
+		of_node_put(node);
+		if (rc) {
+			dev_err(dev, "Couldn't address to resource for reserved memory\n");
+			return -ENXIO;
+		}
+
+		lpc_ctrl->mem_size = resource_size(&resm);
+		lpc_ctrl->mem_base = resm.start;
+
+		if (!is_power_of_2(lpc_ctrl->mem_size)) {
+			dev_err(dev, "Reserved memory size must be a power of 2, got %u\n",
+			       (unsigned int)lpc_ctrl->mem_size);
+			return -EINVAL;
+		}
+
+		if (!IS_ALIGNED(lpc_ctrl->mem_base, lpc_ctrl->mem_size)) {
+			dev_err(dev, "Reserved memory must be naturally aligned for size %u\n",
+			       (unsigned int)lpc_ctrl->mem_size);
+			return -EINVAL;
+		}
+	}
+
+	np = pdev->dev.parent->of_node;
+	if (!of_device_is_compatible(np, "aspeed,ast2400-lpc-v2") &&
+	    !of_device_is_compatible(np, "aspeed,ast2500-lpc-v2") &&
+	    !of_device_is_compatible(np, "aspeed,ast2600-lpc-v2")) {
+		dev_err(dev, "unsupported LPC device binding\n");
+		return -ENODEV;
+	}
+
+	lpc_ctrl->regmap = syscon_node_to_regmap(np);
+	if (IS_ERR(lpc_ctrl->regmap)) {
+		dev_err(dev, "Couldn't get regmap\n");
+		return -ENODEV;
+	}
+
+	if (of_device_is_compatible(dev->of_node, "aspeed,ast2600-lpc-ctrl")) {
+		lpc_ctrl->fwh2ahb = true;
+
+		lpc_ctrl->scu = syscon_regmap_lookup_by_compatible("aspeed,ast2600-scu");
+		if (IS_ERR(lpc_ctrl->scu)) {
+			dev_err(dev, "couldn't find scu\n");
+			return PTR_ERR(lpc_ctrl->scu);
+		}
+	}
+
+	lpc_ctrl->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(lpc_ctrl->clk))
+		return dev_err_probe(dev, PTR_ERR(lpc_ctrl->clk),
+				     "couldn't get clock\n");
+	rc = clk_prepare_enable(lpc_ctrl->clk);
+	if (rc) {
+		dev_err(dev, "couldn't enable clock\n");
+		return rc;
+	}
+
+	lpc_ctrl->miscdev.minor = MISC_DYNAMIC_MINOR;
+	lpc_ctrl->miscdev.name = DEVICE_NAME;
+	lpc_ctrl->miscdev.fops = &aspeed_lpc_ctrl_fops;
+	lpc_ctrl->miscdev.parent = dev;
+	rc = misc_register(&lpc_ctrl->miscdev);
+	if (rc) {
+		dev_err(dev, "Unable to register device\n");
+		goto err;
+	}
+
+	return 0;
+
+err:
+	clk_disable_unprepare(lpc_ctrl->clk);
+	return rc;
+}
+
+static int aspeed_lpc_ctrl_remove(struct platform_device *pdev)
+{
+	struct aspeed_lpc_ctrl *lpc_ctrl = dev_get_drvdata(&pdev->dev);
+
+	misc_deregister(&lpc_ctrl->miscdev);
+	clk_disable_unprepare(lpc_ctrl->clk);
+
+	return 0;
+}
+
+static const struct of_device_id aspeed_lpc_ctrl_match[] = {
+	{ .compatible = "aspeed,ast2400-lpc-ctrl" },
+	{ .compatible = "aspeed,ast2500-lpc-ctrl" },
+	{ .compatible = "aspeed,ast2600-lpc-ctrl" },
+	{ },
+};
+
+static struct platform_driver aspeed_lpc_ctrl_driver = {
+	.driver = {
+		.name		= DEVICE_NAME,
+		.of_match_table = aspeed_lpc_ctrl_match,
+	},
+	.probe = aspeed_lpc_ctrl_probe,
+	.remove = aspeed_lpc_ctrl_remove,
+};
+
+module_platform_driver(aspeed_lpc_ctrl_driver);
+
+MODULE_DEVICE_TABLE(of, aspeed_lpc_ctrl_match);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cyril Bur <cyrilbur@gmail.com>");
+MODULE_DESCRIPTION("Control for ASPEED LPC HOST to BMC mappings");