Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 191 insertions, 0 deletions

diff --git a/drivers/soc/hisilicon/kunpeng_hccs.h b/drivers/soc/hisilicon/kunpeng_hccs.h
new file mode 100644
index 0000000000..6012d27760
--- /dev/null
+++ b/drivers/soc/hisilicon/kunpeng_hccs.h
@@ -0,0 +1,191 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Copyright (c) 2023 Hisilicon Limited. */
+
+#ifndef __KUNPENG_HCCS_H__
+#define __KUNPENG_HCCS_H__
+
+/*
+ * |---------------  Chip0  ---------------|----------------  ChipN  -------------|
+ * |--------Die0-------|--------DieN-------|--------Die0-------|-------DieN-------|
+ * | P0 | P1 | P2 | P3 | P0 | P1 | P2 | P3 | P0 | P1 | P2 | P3 |P0 | P1 | P2 | P3 |
+ */
+
+/*
+ * This value cannot be 255, otherwise the loop of the multi-BD communication
+ * case cannot end.
+ */
+#define HCCS_DIE_MAX_PORT_ID	254
+
+struct hccs_port_info {
+	u8 port_id;
+	u8 port_type;
+	u8 lane_mode;
+	bool enable; /* if the port is enabled */
+	struct kobject kobj;
+	bool dir_created;
+	struct hccs_die_info *die; /* point to the die the port is located */
+};
+
+struct hccs_die_info {
+	u8 die_id;
+	u8 port_num;
+	u8 min_port_id;
+	u8 max_port_id;
+	struct hccs_port_info *ports;
+	struct kobject kobj;
+	bool dir_created;
+	struct hccs_chip_info *chip; /* point to the chip the die is located */
+};
+
+struct hccs_chip_info {
+	u8 chip_id;
+	u8 die_num;
+	struct hccs_die_info *dies;
+	struct kobject kobj;
+	struct hccs_dev *hdev;
+};
+
+struct hccs_mbox_client_info {
+	struct mbox_client client;
+	struct mbox_chan *mbox_chan;
+	struct pcc_mbox_chan *pcc_chan;
+	u64 deadline_us;
+	void __iomem *pcc_comm_addr;
+};
+
+struct hccs_dev {
+	struct device *dev;
+	struct acpi_device *acpi_dev;
+	u64 caps;
+	u8 chip_num;
+	struct hccs_chip_info *chips;
+	u8 chan_id;
+	struct mutex lock;
+	struct hccs_mbox_client_info cl_info;
+};
+
+#define HCCS_SERDES_MODULE_CODE 0x32
+enum hccs_subcmd_type {
+	HCCS_GET_CHIP_NUM = 0x1,
+	HCCS_GET_DIE_NUM,
+	HCCS_GET_DIE_INFO,
+	HCCS_GET_DIE_PORT_INFO,
+	HCCS_GET_DEV_CAP,
+	HCCS_GET_PORT_LINK_STATUS,
+	HCCS_GET_PORT_CRC_ERR_CNT,
+	HCCS_GET_DIE_PORTS_LANE_STA,
+	HCCS_GET_DIE_PORTS_LINK_STA,
+	HCCS_GET_DIE_PORTS_CRC_ERR_CNT,
+	HCCS_SUB_CMD_MAX = 255,
+};
+
+struct hccs_die_num_req_param {
+	u8 chip_id;
+};
+
+struct hccs_die_info_req_param {
+	u8 chip_id;
+	u8 die_idx;
+};
+
+struct hccs_die_info_rsp_data {
+	u8 die_id;
+	u8 port_num;
+	u8 min_port_id;
+	u8 max_port_id;
+};
+
+struct hccs_port_attr {
+	u8 port_id;
+	u8 port_type;
+	u8 lane_mode;
+	u8 enable : 1; /* if the port is enabled */
+	u16 rsv[2];
+};
+
+/*
+ * The common command request for getting the information of all HCCS port on
+ * specified DIE.
+ */
+struct hccs_die_comm_req_param {
+	u8 chip_id;
+	u8 die_id; /* id in hardware */
+};
+
+/* The common command request for getting the information of a specific port */
+struct hccs_port_comm_req_param {
+	u8 chip_id;
+	u8 die_id;
+	u8 port_id;
+};
+
+#define HCCS_PORT_RESET         1
+#define HCCS_PORT_SETUP         2
+#define HCCS_PORT_CONFIG        3
+#define HCCS_PORT_READY         4
+struct hccs_link_status {
+	u8 lane_mask; /* indicate which lanes are used. */
+	u8 link_fsm : 3; /* link fsm, 1: reset 2: setup 3: config 4: link-up */
+	u8 lane_num : 5; /* current lane number */
+};
+
+struct hccs_req_head {
+	u8 module_code; /* set to 0x32 for serdes */
+	u8 start_id;
+	u8 rsv[2];
+};
+
+struct hccs_rsp_head {
+	u8 data_len;
+	u8 next_id;
+	u8 rsv[2];
+};
+
+struct hccs_fw_inner_head {
+	u8 retStatus; /* 0: success, other: failure */
+	u8 rsv[7];
+};
+
+#define HCCS_PCC_SHARE_MEM_BYTES	64
+#define HCCS_FW_INNER_HEAD_BYTES	8
+#define HCCS_RSP_HEAD_BYTES		4
+
+#define HCCS_MAX_RSP_DATA_BYTES		(HCCS_PCC_SHARE_MEM_BYTES - \
+					 HCCS_FW_INNER_HEAD_BYTES - \
+					 HCCS_RSP_HEAD_BYTES)
+#define HCCS_MAX_RSP_DATA_SIZE_MAX	(HCCS_MAX_RSP_DATA_BYTES / 4)
+
+/*
+ * Note: Actual available size of data field also depands on the PCC header
+ * bytes of the specific type. Driver needs to copy the response data in the
+ * communication space based on the real length.
+ */
+struct hccs_rsp_desc {
+	struct hccs_fw_inner_head fw_inner_head; /* 8 Bytes */
+	struct hccs_rsp_head rsp_head; /* 4 Bytes */
+	u32 data[HCCS_MAX_RSP_DATA_SIZE_MAX];
+};
+
+#define HCCS_REQ_HEAD_BYTES		4
+#define HCCS_MAX_REQ_DATA_BYTES		(HCCS_PCC_SHARE_MEM_BYTES - \
+					 HCCS_REQ_HEAD_BYTES)
+#define HCCS_MAX_REQ_DATA_SIZE_MAX	(HCCS_MAX_REQ_DATA_BYTES / 4)
+
+/*
+ * Note: Actual available size of data field also depands on the PCC header
+ * bytes of the specific type. Driver needs to copy the request data to the
+ * communication space based on the real length.
+ */
+struct hccs_req_desc {
+	struct hccs_req_head req_head; /* 4 Bytes */
+	u32 data[HCCS_MAX_REQ_DATA_SIZE_MAX];
+};
+
+struct hccs_desc {
+	union {
+		struct hccs_req_desc req;
+		struct hccs_rsp_desc rsp;
+	};
+};
+
+#endif /* __KUNPENG_HCCS_H__ */