summaryrefslogtreecommitdiffstats
path: root/drivers/soc/mediatek/mtk-mmsys.h
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-05-18 18:50:12 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-05-18 18:50:12 +0000
commit8665bd53f2f2e27e5511d90428cb3f60e6d0ce15 (patch)
tree8d58900dc0ebd4a3011f92c128d2fe45bc7c4bf2 /drivers/soc/mediatek/mtk-mmsys.h
parentAdding debian version 6.7.12-1. (diff)
downloadlinux-8665bd53f2f2e27e5511d90428cb3f60e6d0ce15.tar.xz
linux-8665bd53f2f2e27e5511d90428cb3f60e6d0ce15.zip
Merging upstream version 6.8.9.
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/soc/mediatek/mtk-mmsys.h')
-rw-r--r--drivers/soc/mediatek/mtk-mmsys.h32
1 files changed, 32 insertions, 0 deletions
diff --git a/drivers/soc/mediatek/mtk-mmsys.h b/drivers/soc/mediatek/mtk-mmsys.h
index 6725403d2e..d370192737 100644
--- a/drivers/soc/mediatek/mtk-mmsys.h
+++ b/drivers/soc/mediatek/mtk-mmsys.h
@@ -78,6 +78,8 @@
#define DSI_SEL_IN_RDMA 0x1
#define DSI_SEL_IN_MASK 0x1
+#define MMSYS_RST_NR(bank, bit) (((bank) * 32) + (bit))
+
struct mtk_mmsys_routes {
u32 from_comp;
u32 to_comp;
@@ -86,13 +88,43 @@ struct mtk_mmsys_routes {
u32 val;
};
+/**
+ * struct mtk_mmsys_driver_data - Settings of the mmsys
+ * @clk_driver: Clock driver name that the mmsys is using
+ * (defined in drivers/clk/mediatek/clk-*.c).
+ * @routes: Routing table of the mmsys.
+ * It provides mux settings from one module to another.
+ * @num_routes: Array size of the routes.
+ * @sw0_rst_offset: Register offset for the reset control.
+ * @num_resets: Number of reset bits that are defined
+ * @is_vppsys: Whether the mmsys is VPPSYS (Video Processing Pipe)
+ * or VDOSYS (Video). Only VDOSYS needs to be added to drm driver.
+ * @vsync_len: VSYNC length of the MIXER.
+ * VSYNC is usually triggered by the connector, so its length is a
+ * fixed value when the frame rate is decided, but ETHDR and
+ * MIXER generate their own VSYNC due to hardware design, therefore
+ * MIXER has to sync with ETHDR by adjusting VSYNC length.
+ * On MT8195, there is no such setting so we use the gap between
+ * falling edge and rising edge of SOF (Start of Frame) signal to
+ * do the job, but since MT8188, VSYNC_LEN setting is introduced to
+ * solve the problem and is given 0x40 (ticks) as the default value.
+ * Please notice that this value has to be set to 1 (minimum) if
+ * ETHDR is bypassed, otherwise MIXER could wait too long and causing
+ * underflow.
+ *
+ * Each MMSYS (multi-media system) may have different settings, they may use
+ * different clock sources, mux settings, reset control ...etc., and these
+ * differences are all stored here.
+ */
struct mtk_mmsys_driver_data {
const char *clk_driver;
const struct mtk_mmsys_routes *routes;
const unsigned int num_routes;
const u16 sw0_rst_offset;
+ const u8 *rst_tb;
const u32 num_resets;
const bool is_vppsys;
+ const u8 vsync_len;
};
/*