summaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-geni-qcom.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/spi/spi-geni-qcom.c
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/spi/spi-geni-qcom.c')
-rw-r--r--drivers/spi/spi-geni-qcom.c1268
1 files changed, 1268 insertions, 0 deletions
diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
new file mode 100644
index 0000000000..f4f376a835
--- /dev/null
+++ b/drivers/spi/spi-geni-qcom.c
@@ -0,0 +1,1268 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017-2018, The Linux foundation. All rights reserved.
+
+#include <linux/clk.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/dma/qcom-gpi-dma.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/soc/qcom/geni-se.h>
+#include <linux/spi/spi.h>
+#include <linux/spinlock.h>
+
+/* SPI SE specific registers and respective register fields */
+#define SE_SPI_CPHA 0x224
+#define CPHA BIT(0)
+
+#define SE_SPI_LOOPBACK 0x22c
+#define LOOPBACK_ENABLE 0x1
+#define NORMAL_MODE 0x0
+#define LOOPBACK_MSK GENMASK(1, 0)
+
+#define SE_SPI_CPOL 0x230
+#define CPOL BIT(2)
+
+#define SE_SPI_DEMUX_OUTPUT_INV 0x24c
+#define CS_DEMUX_OUTPUT_INV_MSK GENMASK(3, 0)
+
+#define SE_SPI_DEMUX_SEL 0x250
+#define CS_DEMUX_OUTPUT_SEL GENMASK(3, 0)
+
+#define SE_SPI_TRANS_CFG 0x25c
+#define CS_TOGGLE BIT(1)
+
+#define SE_SPI_WORD_LEN 0x268
+#define WORD_LEN_MSK GENMASK(9, 0)
+#define MIN_WORD_LEN 4
+
+#define SE_SPI_TX_TRANS_LEN 0x26c
+#define SE_SPI_RX_TRANS_LEN 0x270
+#define TRANS_LEN_MSK GENMASK(23, 0)
+
+#define SE_SPI_PRE_POST_CMD_DLY 0x274
+
+#define SE_SPI_DELAY_COUNTERS 0x278
+#define SPI_INTER_WORDS_DELAY_MSK GENMASK(9, 0)
+#define SPI_CS_CLK_DELAY_MSK GENMASK(19, 10)
+#define SPI_CS_CLK_DELAY_SHFT 10
+
+#define SE_SPI_SLAVE_EN (0x2BC)
+#define SPI_SLAVE_EN BIT(0)
+
+/* M_CMD OP codes for SPI */
+#define SPI_TX_ONLY 1
+#define SPI_RX_ONLY 2
+#define SPI_TX_RX 7
+#define SPI_CS_ASSERT 8
+#define SPI_CS_DEASSERT 9
+#define SPI_SCK_ONLY 10
+/* M_CMD params for SPI */
+#define SPI_PRE_CMD_DELAY BIT(0)
+#define TIMESTAMP_BEFORE BIT(1)
+#define FRAGMENTATION BIT(2)
+#define TIMESTAMP_AFTER BIT(3)
+#define POST_CMD_DELAY BIT(4)
+
+#define GSI_LOOPBACK_EN BIT(0)
+#define GSI_CS_TOGGLE BIT(3)
+#define GSI_CPHA BIT(4)
+#define GSI_CPOL BIT(5)
+
+struct spi_geni_master {
+ struct geni_se se;
+ struct device *dev;
+ u32 tx_fifo_depth;
+ u32 fifo_width_bits;
+ u32 tx_wm;
+ u32 last_mode;
+ unsigned long cur_speed_hz;
+ unsigned long cur_sclk_hz;
+ unsigned int cur_bits_per_word;
+ unsigned int tx_rem_bytes;
+ unsigned int rx_rem_bytes;
+ const struct spi_transfer *cur_xfer;
+ struct completion cs_done;
+ struct completion cancel_done;
+ struct completion abort_done;
+ struct completion tx_reset_done;
+ struct completion rx_reset_done;
+ unsigned int oversampling;
+ spinlock_t lock;
+ int irq;
+ bool cs_flag;
+ bool abort_failed;
+ struct dma_chan *tx;
+ struct dma_chan *rx;
+ int cur_xfer_mode;
+};
+
+static void spi_slv_setup(struct spi_geni_master *mas)
+{
+ struct geni_se *se = &mas->se;
+
+ writel(SPI_SLAVE_EN, se->base + SE_SPI_SLAVE_EN);
+ writel(GENI_IO_MUX_0_EN, se->base + GENI_OUTPUT_CTRL);
+ writel(START_TRIGGER, se->base + SE_GENI_CFG_SEQ_START);
+ dev_dbg(mas->dev, "spi slave setup done\n");
+}
+
+static int get_spi_clk_cfg(unsigned int speed_hz,
+ struct spi_geni_master *mas,
+ unsigned int *clk_idx,
+ unsigned int *clk_div)
+{
+ unsigned long sclk_freq;
+ unsigned int actual_hz;
+ int ret;
+
+ ret = geni_se_clk_freq_match(&mas->se,
+ speed_hz * mas->oversampling,
+ clk_idx, &sclk_freq, false);
+ if (ret) {
+ dev_err(mas->dev, "Failed(%d) to find src clk for %dHz\n",
+ ret, speed_hz);
+ return ret;
+ }
+
+ *clk_div = DIV_ROUND_UP(sclk_freq, mas->oversampling * speed_hz);
+ actual_hz = sclk_freq / (mas->oversampling * *clk_div);
+
+ dev_dbg(mas->dev, "req %u=>%u sclk %lu, idx %d, div %d\n", speed_hz,
+ actual_hz, sclk_freq, *clk_idx, *clk_div);
+ ret = dev_pm_opp_set_rate(mas->dev, sclk_freq);
+ if (ret)
+ dev_err(mas->dev, "dev_pm_opp_set_rate failed %d\n", ret);
+ else
+ mas->cur_sclk_hz = sclk_freq;
+
+ return ret;
+}
+
+static void handle_se_timeout(struct spi_master *spi,
+ struct spi_message *msg)
+{
+ struct spi_geni_master *mas = spi_master_get_devdata(spi);
+ unsigned long time_left;
+ struct geni_se *se = &mas->se;
+ const struct spi_transfer *xfer;
+
+ spin_lock_irq(&mas->lock);
+ if (mas->cur_xfer_mode == GENI_SE_FIFO)
+ writel(0, se->base + SE_GENI_TX_WATERMARK_REG);
+
+ xfer = mas->cur_xfer;
+ mas->cur_xfer = NULL;
+
+ if (spi->slave) {
+ /*
+ * skip CMD Cancel sequnece since spi slave
+ * doesn`t support CMD Cancel sequnece
+ */
+ spin_unlock_irq(&mas->lock);
+ goto unmap_if_dma;
+ }
+
+ reinit_completion(&mas->cancel_done);
+ geni_se_cancel_m_cmd(se);
+ spin_unlock_irq(&mas->lock);
+
+ time_left = wait_for_completion_timeout(&mas->cancel_done, HZ);
+ if (time_left)
+ goto unmap_if_dma;
+
+ spin_lock_irq(&mas->lock);
+ reinit_completion(&mas->abort_done);
+ geni_se_abort_m_cmd(se);
+ spin_unlock_irq(&mas->lock);
+
+ time_left = wait_for_completion_timeout(&mas->abort_done, HZ);
+ if (!time_left) {
+ dev_err(mas->dev, "Failed to cancel/abort m_cmd\n");
+
+ /*
+ * No need for a lock since SPI core has a lock and we never
+ * access this from an interrupt.
+ */
+ mas->abort_failed = true;
+ }
+
+unmap_if_dma:
+ if (mas->cur_xfer_mode == GENI_SE_DMA) {
+ if (xfer) {
+ if (xfer->tx_buf) {
+ spin_lock_irq(&mas->lock);
+ reinit_completion(&mas->tx_reset_done);
+ writel(1, se->base + SE_DMA_TX_FSM_RST);
+ spin_unlock_irq(&mas->lock);
+ time_left = wait_for_completion_timeout(&mas->tx_reset_done, HZ);
+ if (!time_left)
+ dev_err(mas->dev, "DMA TX RESET failed\n");
+ }
+ if (xfer->rx_buf) {
+ spin_lock_irq(&mas->lock);
+ reinit_completion(&mas->rx_reset_done);
+ writel(1, se->base + SE_DMA_RX_FSM_RST);
+ spin_unlock_irq(&mas->lock);
+ time_left = wait_for_completion_timeout(&mas->rx_reset_done, HZ);
+ if (!time_left)
+ dev_err(mas->dev, "DMA RX RESET failed\n");
+ }
+ } else {
+ /*
+ * This can happen if a timeout happened and we had to wait
+ * for lock in this function because isr was holding the lock
+ * and handling transfer completion at that time.
+ */
+ dev_warn(mas->dev, "Cancel/Abort on completed SPI transfer\n");
+ }
+ }
+}
+
+static void handle_gpi_timeout(struct spi_master *spi, struct spi_message *msg)
+{
+ struct spi_geni_master *mas = spi_master_get_devdata(spi);
+
+ dmaengine_terminate_sync(mas->tx);
+ dmaengine_terminate_sync(mas->rx);
+}
+
+static void spi_geni_handle_err(struct spi_master *spi, struct spi_message *msg)
+{
+ struct spi_geni_master *mas = spi_master_get_devdata(spi);
+
+ switch (mas->cur_xfer_mode) {
+ case GENI_SE_FIFO:
+ case GENI_SE_DMA:
+ handle_se_timeout(spi, msg);
+ break;
+ case GENI_GPI_DMA:
+ handle_gpi_timeout(spi, msg);
+ break;
+ default:
+ dev_err(mas->dev, "Abort on Mode:%d not supported", mas->cur_xfer_mode);
+ }
+}
+
+static bool spi_geni_is_abort_still_pending(struct spi_geni_master *mas)
+{
+ struct geni_se *se = &mas->se;
+ u32 m_irq, m_irq_en;
+
+ if (!mas->abort_failed)
+ return false;
+
+ /*
+ * The only known case where a transfer times out and then a cancel
+ * times out then an abort times out is if something is blocking our
+ * interrupt handler from running. Avoid starting any new transfers
+ * until that sorts itself out.
+ */
+ spin_lock_irq(&mas->lock);
+ m_irq = readl(se->base + SE_GENI_M_IRQ_STATUS);
+ m_irq_en = readl(se->base + SE_GENI_M_IRQ_EN);
+ spin_unlock_irq(&mas->lock);
+
+ if (m_irq & m_irq_en) {
+ dev_err(mas->dev, "Interrupts pending after abort: %#010x\n",
+ m_irq & m_irq_en);
+ return true;
+ }
+
+ /*
+ * If we're here the problem resolved itself so no need to check more
+ * on future transfers.
+ */
+ mas->abort_failed = false;
+
+ return false;
+}
+
+static void spi_geni_set_cs(struct spi_device *slv, bool set_flag)
+{
+ struct spi_geni_master *mas = spi_master_get_devdata(slv->master);
+ struct spi_master *spi = dev_get_drvdata(mas->dev);
+ struct geni_se *se = &mas->se;
+ unsigned long time_left;
+
+ if (!(slv->mode & SPI_CS_HIGH))
+ set_flag = !set_flag;
+
+ if (set_flag == mas->cs_flag)
+ return;
+
+ pm_runtime_get_sync(mas->dev);
+
+ if (spi_geni_is_abort_still_pending(mas)) {
+ dev_err(mas->dev, "Can't set chip select\n");
+ goto exit;
+ }
+
+ spin_lock_irq(&mas->lock);
+ if (mas->cur_xfer) {
+ dev_err(mas->dev, "Can't set CS when prev xfer running\n");
+ spin_unlock_irq(&mas->lock);
+ goto exit;
+ }
+
+ mas->cs_flag = set_flag;
+ /* set xfer_mode to FIFO to complete cs_done in isr */
+ mas->cur_xfer_mode = GENI_SE_FIFO;
+ geni_se_select_mode(se, mas->cur_xfer_mode);
+
+ reinit_completion(&mas->cs_done);
+ if (set_flag)
+ geni_se_setup_m_cmd(se, SPI_CS_ASSERT, 0);
+ else
+ geni_se_setup_m_cmd(se, SPI_CS_DEASSERT, 0);
+ spin_unlock_irq(&mas->lock);
+
+ time_left = wait_for_completion_timeout(&mas->cs_done, HZ);
+ if (!time_left) {
+ dev_warn(mas->dev, "Timeout setting chip select\n");
+ handle_se_timeout(spi, NULL);
+ }
+
+exit:
+ pm_runtime_put(mas->dev);
+}
+
+static void spi_setup_word_len(struct spi_geni_master *mas, u16 mode,
+ unsigned int bits_per_word)
+{
+ unsigned int pack_words;
+ bool msb_first = (mode & SPI_LSB_FIRST) ? false : true;
+ struct geni_se *se = &mas->se;
+ u32 word_len;
+
+ /*
+ * If bits_per_word isn't a byte aligned value, set the packing to be
+ * 1 SPI word per FIFO word.
+ */
+ if (!(mas->fifo_width_bits % bits_per_word))
+ pack_words = mas->fifo_width_bits / bits_per_word;
+ else
+ pack_words = 1;
+ geni_se_config_packing(&mas->se, bits_per_word, pack_words, msb_first,
+ true, true);
+ word_len = (bits_per_word - MIN_WORD_LEN) & WORD_LEN_MSK;
+ writel(word_len, se->base + SE_SPI_WORD_LEN);
+}
+
+static int geni_spi_set_clock_and_bw(struct spi_geni_master *mas,
+ unsigned long clk_hz)
+{
+ u32 clk_sel, m_clk_cfg, idx, div;
+ struct geni_se *se = &mas->se;
+ int ret;
+
+ if (clk_hz == mas->cur_speed_hz)
+ return 0;
+
+ ret = get_spi_clk_cfg(clk_hz, mas, &idx, &div);
+ if (ret) {
+ dev_err(mas->dev, "Err setting clk to %lu: %d\n", clk_hz, ret);
+ return ret;
+ }
+
+ /*
+ * SPI core clock gets configured with the requested frequency
+ * or the frequency closer to the requested frequency.
+ * For that reason requested frequency is stored in the
+ * cur_speed_hz and referred in the consecutive transfer instead
+ * of calling clk_get_rate() API.
+ */
+ mas->cur_speed_hz = clk_hz;
+
+ clk_sel = idx & CLK_SEL_MSK;
+ m_clk_cfg = (div << CLK_DIV_SHFT) | SER_CLK_EN;
+ writel(clk_sel, se->base + SE_GENI_CLK_SEL);
+ writel(m_clk_cfg, se->base + GENI_SER_M_CLK_CFG);
+
+ /* Set BW quota for CPU as driver supports FIFO mode only. */
+ se->icc_paths[CPU_TO_GENI].avg_bw = Bps_to_icc(mas->cur_speed_hz);
+ ret = geni_icc_set_bw(se);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int setup_fifo_params(struct spi_device *spi_slv,
+ struct spi_master *spi)
+{
+ struct spi_geni_master *mas = spi_master_get_devdata(spi);
+ struct geni_se *se = &mas->se;
+ u32 loopback_cfg = 0, cpol = 0, cpha = 0, demux_output_inv = 0;
+ u32 demux_sel;
+
+ if (mas->last_mode != spi_slv->mode) {
+ if (spi_slv->mode & SPI_LOOP)
+ loopback_cfg = LOOPBACK_ENABLE;
+
+ if (spi_slv->mode & SPI_CPOL)
+ cpol = CPOL;
+
+ if (spi_slv->mode & SPI_CPHA)
+ cpha = CPHA;
+
+ if (spi_slv->mode & SPI_CS_HIGH)
+ demux_output_inv = BIT(spi_get_chipselect(spi_slv, 0));
+
+ demux_sel = spi_get_chipselect(spi_slv, 0);
+ mas->cur_bits_per_word = spi_slv->bits_per_word;
+
+ spi_setup_word_len(mas, spi_slv->mode, spi_slv->bits_per_word);
+ writel(loopback_cfg, se->base + SE_SPI_LOOPBACK);
+ writel(demux_sel, se->base + SE_SPI_DEMUX_SEL);
+ writel(cpha, se->base + SE_SPI_CPHA);
+ writel(cpol, se->base + SE_SPI_CPOL);
+ writel(demux_output_inv, se->base + SE_SPI_DEMUX_OUTPUT_INV);
+
+ mas->last_mode = spi_slv->mode;
+ }
+
+ return geni_spi_set_clock_and_bw(mas, spi_slv->max_speed_hz);
+}
+
+static void
+spi_gsi_callback_result(void *cb, const struct dmaengine_result *result)
+{
+ struct spi_master *spi = cb;
+
+ spi->cur_msg->status = -EIO;
+ if (result->result != DMA_TRANS_NOERROR) {
+ dev_err(&spi->dev, "DMA txn failed: %d\n", result->result);
+ spi_finalize_current_transfer(spi);
+ return;
+ }
+
+ if (!result->residue) {
+ spi->cur_msg->status = 0;
+ dev_dbg(&spi->dev, "DMA txn completed\n");
+ } else {
+ dev_err(&spi->dev, "DMA xfer has pending: %d\n", result->residue);
+ }
+
+ spi_finalize_current_transfer(spi);
+}
+
+static int setup_gsi_xfer(struct spi_transfer *xfer, struct spi_geni_master *mas,
+ struct spi_device *spi_slv, struct spi_master *spi)
+{
+ unsigned long flags = DMA_PREP_INTERRUPT | DMA_CTRL_ACK;
+ struct dma_slave_config config = {};
+ struct gpi_spi_config peripheral = {};
+ struct dma_async_tx_descriptor *tx_desc, *rx_desc;
+ int ret;
+
+ config.peripheral_config = &peripheral;
+ config.peripheral_size = sizeof(peripheral);
+ peripheral.set_config = true;
+
+ if (xfer->bits_per_word != mas->cur_bits_per_word ||
+ xfer->speed_hz != mas->cur_speed_hz) {
+ mas->cur_bits_per_word = xfer->bits_per_word;
+ mas->cur_speed_hz = xfer->speed_hz;
+ }
+
+ if (xfer->tx_buf && xfer->rx_buf) {
+ peripheral.cmd = SPI_DUPLEX;
+ } else if (xfer->tx_buf) {
+ peripheral.cmd = SPI_TX;
+ peripheral.rx_len = 0;
+ } else if (xfer->rx_buf) {
+ peripheral.cmd = SPI_RX;
+ if (!(mas->cur_bits_per_word % MIN_WORD_LEN)) {
+ peripheral.rx_len = ((xfer->len << 3) / mas->cur_bits_per_word);
+ } else {
+ int bytes_per_word = (mas->cur_bits_per_word / BITS_PER_BYTE) + 1;
+
+ peripheral.rx_len = (xfer->len / bytes_per_word);
+ }
+ }
+
+ peripheral.loopback_en = !!(spi_slv->mode & SPI_LOOP);
+ peripheral.clock_pol_high = !!(spi_slv->mode & SPI_CPOL);
+ peripheral.data_pol_high = !!(spi_slv->mode & SPI_CPHA);
+ peripheral.cs = spi_get_chipselect(spi_slv, 0);
+ peripheral.pack_en = true;
+ peripheral.word_len = xfer->bits_per_word - MIN_WORD_LEN;
+
+ ret = get_spi_clk_cfg(mas->cur_speed_hz, mas,
+ &peripheral.clk_src, &peripheral.clk_div);
+ if (ret) {
+ dev_err(mas->dev, "Err in get_spi_clk_cfg() :%d\n", ret);
+ return ret;
+ }
+
+ if (!xfer->cs_change) {
+ if (!list_is_last(&xfer->transfer_list, &spi->cur_msg->transfers))
+ peripheral.fragmentation = FRAGMENTATION;
+ }
+
+ if (peripheral.cmd & SPI_RX) {
+ dmaengine_slave_config(mas->rx, &config);
+ rx_desc = dmaengine_prep_slave_sg(mas->rx, xfer->rx_sg.sgl, xfer->rx_sg.nents,
+ DMA_DEV_TO_MEM, flags);
+ if (!rx_desc) {
+ dev_err(mas->dev, "Err setting up rx desc\n");
+ return -EIO;
+ }
+ }
+
+ /*
+ * Prepare the TX always, even for RX or tx_buf being null, we would
+ * need TX to be prepared per GSI spec
+ */
+ dmaengine_slave_config(mas->tx, &config);
+ tx_desc = dmaengine_prep_slave_sg(mas->tx, xfer->tx_sg.sgl, xfer->tx_sg.nents,
+ DMA_MEM_TO_DEV, flags);
+ if (!tx_desc) {
+ dev_err(mas->dev, "Err setting up tx desc\n");
+ return -EIO;
+ }
+
+ tx_desc->callback_result = spi_gsi_callback_result;
+ tx_desc->callback_param = spi;
+
+ if (peripheral.cmd & SPI_RX)
+ dmaengine_submit(rx_desc);
+ dmaengine_submit(tx_desc);
+
+ if (peripheral.cmd & SPI_RX)
+ dma_async_issue_pending(mas->rx);
+
+ dma_async_issue_pending(mas->tx);
+ return 1;
+}
+
+static u32 get_xfer_len_in_words(struct spi_transfer *xfer,
+ struct spi_geni_master *mas)
+{
+ u32 len;
+
+ if (!(mas->cur_bits_per_word % MIN_WORD_LEN))
+ len = xfer->len * BITS_PER_BYTE / mas->cur_bits_per_word;
+ else
+ len = xfer->len / (mas->cur_bits_per_word / BITS_PER_BYTE + 1);
+ len &= TRANS_LEN_MSK;
+
+ return len;
+}
+
+static bool geni_can_dma(struct spi_controller *ctlr,
+ struct spi_device *slv, struct spi_transfer *xfer)
+{
+ struct spi_geni_master *mas = spi_master_get_devdata(slv->master);
+ u32 len, fifo_size;
+
+ if (mas->cur_xfer_mode == GENI_GPI_DMA)
+ return true;
+
+ /* Set SE DMA mode for SPI slave. */
+ if (ctlr->slave)
+ return true;
+
+ len = get_xfer_len_in_words(xfer, mas);
+ fifo_size = mas->tx_fifo_depth * mas->fifo_width_bits / mas->cur_bits_per_word;
+
+ if (len > fifo_size)
+ return true;
+ else
+ return false;
+}
+
+static int spi_geni_prepare_message(struct spi_master *spi,
+ struct spi_message *spi_msg)
+{
+ struct spi_geni_master *mas = spi_master_get_devdata(spi);
+ int ret;
+
+ switch (mas->cur_xfer_mode) {
+ case GENI_SE_FIFO:
+ case GENI_SE_DMA:
+ if (spi_geni_is_abort_still_pending(mas))
+ return -EBUSY;
+ ret = setup_fifo_params(spi_msg->spi, spi);
+ if (ret)
+ dev_err(mas->dev, "Couldn't select mode %d\n", ret);
+ return ret;
+
+ case GENI_GPI_DMA:
+ /* nothing to do for GPI DMA */
+ return 0;
+ }
+
+ dev_err(mas->dev, "Mode not supported %d", mas->cur_xfer_mode);
+ return -EINVAL;
+}
+
+static int spi_geni_grab_gpi_chan(struct spi_geni_master *mas)
+{
+ int ret;
+
+ mas->tx = dma_request_chan(mas->dev, "tx");
+ if (IS_ERR(mas->tx)) {
+ ret = dev_err_probe(mas->dev, PTR_ERR(mas->tx),
+ "Failed to get tx DMA ch\n");
+ goto err_tx;
+ }
+
+ mas->rx = dma_request_chan(mas->dev, "rx");
+ if (IS_ERR(mas->rx)) {
+ ret = dev_err_probe(mas->dev, PTR_ERR(mas->rx),
+ "Failed to get rx DMA ch\n");
+ goto err_rx;
+ }
+
+ return 0;
+
+err_rx:
+ mas->rx = NULL;
+ dma_release_channel(mas->tx);
+err_tx:
+ mas->tx = NULL;
+ return ret;
+}
+
+static void spi_geni_release_dma_chan(struct spi_geni_master *mas)
+{
+ if (mas->rx) {
+ dma_release_channel(mas->rx);
+ mas->rx = NULL;
+ }
+
+ if (mas->tx) {
+ dma_release_channel(mas->tx);
+ mas->tx = NULL;
+ }
+}
+
+static int spi_geni_init(struct spi_geni_master *mas)
+{
+ struct spi_master *spi = dev_get_drvdata(mas->dev);
+ struct geni_se *se = &mas->se;
+ unsigned int proto, major, minor, ver;
+ u32 spi_tx_cfg, fifo_disable;
+ int ret = -ENXIO;
+
+ pm_runtime_get_sync(mas->dev);
+
+ proto = geni_se_read_proto(se);
+
+ if (spi->slave) {
+ if (proto != GENI_SE_SPI_SLAVE) {
+ dev_err(mas->dev, "Invalid proto %d\n", proto);
+ goto out_pm;
+ }
+ spi_slv_setup(mas);
+ } else if (proto != GENI_SE_SPI) {
+ dev_err(mas->dev, "Invalid proto %d\n", proto);
+ goto out_pm;
+ }
+ mas->tx_fifo_depth = geni_se_get_tx_fifo_depth(se);
+
+ /* Width of Tx and Rx FIFO is same */
+ mas->fifo_width_bits = geni_se_get_tx_fifo_width(se);
+
+ /*
+ * Hardware programming guide suggests to configure
+ * RX FIFO RFR level to fifo_depth-2.
+ */
+ geni_se_init(se, mas->tx_fifo_depth - 3, mas->tx_fifo_depth - 2);
+ /* Transmit an entire FIFO worth of data per IRQ */
+ mas->tx_wm = 1;
+ ver = geni_se_get_qup_hw_version(se);
+ major = GENI_SE_VERSION_MAJOR(ver);
+ minor = GENI_SE_VERSION_MINOR(ver);
+
+ if (major == 1 && minor == 0)
+ mas->oversampling = 2;
+ else
+ mas->oversampling = 1;
+
+ fifo_disable = readl(se->base + GENI_IF_DISABLE_RO) & FIFO_IF_DISABLE;
+ switch (fifo_disable) {
+ case 1:
+ ret = spi_geni_grab_gpi_chan(mas);
+ if (!ret) { /* success case */
+ mas->cur_xfer_mode = GENI_GPI_DMA;
+ geni_se_select_mode(se, GENI_GPI_DMA);
+ dev_dbg(mas->dev, "Using GPI DMA mode for SPI\n");
+ break;
+ } else if (ret == -EPROBE_DEFER) {
+ goto out_pm;
+ }
+ /*
+ * in case of failure to get gpi dma channel, we can still do the
+ * FIFO mode, so fallthrough
+ */
+ dev_warn(mas->dev, "FIFO mode disabled, but couldn't get DMA, fall back to FIFO mode\n");
+ fallthrough;
+
+ case 0:
+ mas->cur_xfer_mode = GENI_SE_FIFO;
+ geni_se_select_mode(se, GENI_SE_FIFO);
+ ret = 0;
+ break;
+ }
+
+ /* We always control CS manually */
+ if (!spi->slave) {
+ spi_tx_cfg = readl(se->base + SE_SPI_TRANS_CFG);
+ spi_tx_cfg &= ~CS_TOGGLE;
+ writel(spi_tx_cfg, se->base + SE_SPI_TRANS_CFG);
+ }
+
+out_pm:
+ pm_runtime_put(mas->dev);
+ return ret;
+}
+
+static unsigned int geni_byte_per_fifo_word(struct spi_geni_master *mas)
+{
+ /*
+ * Calculate how many bytes we'll put in each FIFO word. If the
+ * transfer words don't pack cleanly into a FIFO word we'll just put
+ * one transfer word in each FIFO word. If they do pack we'll pack 'em.
+ */
+ if (mas->fifo_width_bits % mas->cur_bits_per_word)
+ return roundup_pow_of_two(DIV_ROUND_UP(mas->cur_bits_per_word,
+ BITS_PER_BYTE));
+
+ return mas->fifo_width_bits / BITS_PER_BYTE;
+}
+
+static bool geni_spi_handle_tx(struct spi_geni_master *mas)
+{
+ struct geni_se *se = &mas->se;
+ unsigned int max_bytes;
+ const u8 *tx_buf;
+ unsigned int bytes_per_fifo_word = geni_byte_per_fifo_word(mas);
+ unsigned int i = 0;
+
+ /* Stop the watermark IRQ if nothing to send */
+ if (!mas->cur_xfer) {
+ writel(0, se->base + SE_GENI_TX_WATERMARK_REG);
+ return false;
+ }
+
+ max_bytes = (mas->tx_fifo_depth - mas->tx_wm) * bytes_per_fifo_word;
+ if (mas->tx_rem_bytes < max_bytes)
+ max_bytes = mas->tx_rem_bytes;
+
+ tx_buf = mas->cur_xfer->tx_buf + mas->cur_xfer->len - mas->tx_rem_bytes;
+ while (i < max_bytes) {
+ unsigned int j;
+ unsigned int bytes_to_write;
+ u32 fifo_word = 0;
+ u8 *fifo_byte = (u8 *)&fifo_word;
+
+ bytes_to_write = min(bytes_per_fifo_word, max_bytes - i);
+ for (j = 0; j < bytes_to_write; j++)
+ fifo_byte[j] = tx_buf[i++];
+ iowrite32_rep(se->base + SE_GENI_TX_FIFOn, &fifo_word, 1);
+ }
+ mas->tx_rem_bytes -= max_bytes;
+ if (!mas->tx_rem_bytes) {
+ writel(0, se->base + SE_GENI_TX_WATERMARK_REG);
+ return false;
+ }
+ return true;
+}
+
+static void geni_spi_handle_rx(struct spi_geni_master *mas)
+{
+ struct geni_se *se = &mas->se;
+ u32 rx_fifo_status;
+ unsigned int rx_bytes;
+ unsigned int rx_last_byte_valid;
+ u8 *rx_buf;
+ unsigned int bytes_per_fifo_word = geni_byte_per_fifo_word(mas);
+ unsigned int i = 0;
+
+ rx_fifo_status = readl(se->base + SE_GENI_RX_FIFO_STATUS);
+ rx_bytes = (rx_fifo_status & RX_FIFO_WC_MSK) * bytes_per_fifo_word;
+ if (rx_fifo_status & RX_LAST) {
+ rx_last_byte_valid = rx_fifo_status & RX_LAST_BYTE_VALID_MSK;
+ rx_last_byte_valid >>= RX_LAST_BYTE_VALID_SHFT;
+ if (rx_last_byte_valid && rx_last_byte_valid < 4)
+ rx_bytes -= bytes_per_fifo_word - rx_last_byte_valid;
+ }
+
+ /* Clear out the FIFO and bail if nowhere to put it */
+ if (!mas->cur_xfer) {
+ for (i = 0; i < DIV_ROUND_UP(rx_bytes, bytes_per_fifo_word); i++)
+ readl(se->base + SE_GENI_RX_FIFOn);
+ return;
+ }
+
+ if (mas->rx_rem_bytes < rx_bytes)
+ rx_bytes = mas->rx_rem_bytes;
+
+ rx_buf = mas->cur_xfer->rx_buf + mas->cur_xfer->len - mas->rx_rem_bytes;
+ while (i < rx_bytes) {
+ u32 fifo_word = 0;
+ u8 *fifo_byte = (u8 *)&fifo_word;
+ unsigned int bytes_to_read;
+ unsigned int j;
+
+ bytes_to_read = min(bytes_per_fifo_word, rx_bytes - i);
+ ioread32_rep(se->base + SE_GENI_RX_FIFOn, &fifo_word, 1);
+ for (j = 0; j < bytes_to_read; j++)
+ rx_buf[i++] = fifo_byte[j];
+ }
+ mas->rx_rem_bytes -= rx_bytes;
+}
+
+static int setup_se_xfer(struct spi_transfer *xfer,
+ struct spi_geni_master *mas,
+ u16 mode, struct spi_master *spi)
+{
+ u32 m_cmd = 0;
+ u32 len;
+ struct geni_se *se = &mas->se;
+ int ret;
+
+ /*
+ * Ensure that our interrupt handler isn't still running from some
+ * prior command before we start messing with the hardware behind
+ * its back. We don't need to _keep_ the lock here since we're only
+ * worried about racing with out interrupt handler. The SPI core
+ * already handles making sure that we're not trying to do two
+ * transfers at once or setting a chip select and doing a transfer
+ * concurrently.
+ *
+ * NOTE: we actually _can't_ hold the lock here because possibly we
+ * might call clk_set_rate() which needs to be able to sleep.
+ */
+ spin_lock_irq(&mas->lock);
+ spin_unlock_irq(&mas->lock);
+
+ if (xfer->bits_per_word != mas->cur_bits_per_word) {
+ spi_setup_word_len(mas, mode, xfer->bits_per_word);
+ mas->cur_bits_per_word = xfer->bits_per_word;
+ }
+
+ /* Speed and bits per word can be overridden per transfer */
+ ret = geni_spi_set_clock_and_bw(mas, xfer->speed_hz);
+ if (ret)
+ return ret;
+
+ mas->tx_rem_bytes = 0;
+ mas->rx_rem_bytes = 0;
+
+ len = get_xfer_len_in_words(xfer, mas);
+
+ mas->cur_xfer = xfer;
+ if (xfer->tx_buf) {
+ m_cmd |= SPI_TX_ONLY;
+ mas->tx_rem_bytes = xfer->len;
+ writel(len, se->base + SE_SPI_TX_TRANS_LEN);
+ }
+
+ if (xfer->rx_buf) {
+ m_cmd |= SPI_RX_ONLY;
+ writel(len, se->base + SE_SPI_RX_TRANS_LEN);
+ mas->rx_rem_bytes = xfer->len;
+ }
+
+ /*
+ * Select DMA mode if sgt are present; and with only 1 entry
+ * This is not a serious limitation because the xfer buffers are
+ * expected to fit into in 1 entry almost always, and if any
+ * doesn't for any reason we fall back to FIFO mode anyway
+ */
+ if (!xfer->tx_sg.nents && !xfer->rx_sg.nents)
+ mas->cur_xfer_mode = GENI_SE_FIFO;
+ else if (xfer->tx_sg.nents > 1 || xfer->rx_sg.nents > 1) {
+ dev_warn_once(mas->dev, "Doing FIFO, cannot handle tx_nents-%d, rx_nents-%d\n",
+ xfer->tx_sg.nents, xfer->rx_sg.nents);
+ mas->cur_xfer_mode = GENI_SE_FIFO;
+ } else
+ mas->cur_xfer_mode = GENI_SE_DMA;
+ geni_se_select_mode(se, mas->cur_xfer_mode);
+
+ /*
+ * Lock around right before we start the transfer since our
+ * interrupt could come in at any time now.
+ */
+ spin_lock_irq(&mas->lock);
+ geni_se_setup_m_cmd(se, m_cmd, FRAGMENTATION);
+
+ if (mas->cur_xfer_mode == GENI_SE_DMA) {
+ if (m_cmd & SPI_RX_ONLY)
+ geni_se_rx_init_dma(se, sg_dma_address(xfer->rx_sg.sgl),
+ sg_dma_len(xfer->rx_sg.sgl));
+ if (m_cmd & SPI_TX_ONLY)
+ geni_se_tx_init_dma(se, sg_dma_address(xfer->tx_sg.sgl),
+ sg_dma_len(xfer->tx_sg.sgl));
+ } else if (m_cmd & SPI_TX_ONLY) {
+ if (geni_spi_handle_tx(mas))
+ writel(mas->tx_wm, se->base + SE_GENI_TX_WATERMARK_REG);
+ }
+
+ spin_unlock_irq(&mas->lock);
+ return ret;
+}
+
+static int spi_geni_transfer_one(struct spi_master *spi,
+ struct spi_device *slv,
+ struct spi_transfer *xfer)
+{
+ struct spi_geni_master *mas = spi_master_get_devdata(spi);
+ int ret;
+
+ if (spi_geni_is_abort_still_pending(mas))
+ return -EBUSY;
+
+ /* Terminate and return success for 0 byte length transfer */
+ if (!xfer->len)
+ return 0;
+
+ if (mas->cur_xfer_mode == GENI_SE_FIFO || mas->cur_xfer_mode == GENI_SE_DMA) {
+ ret = setup_se_xfer(xfer, mas, slv->mode, spi);
+ /* SPI framework expects +ve ret code to wait for transfer complete */
+ if (!ret)
+ ret = 1;
+ return ret;
+ }
+ return setup_gsi_xfer(xfer, mas, slv, spi);
+}
+
+static irqreturn_t geni_spi_isr(int irq, void *data)
+{
+ struct spi_master *spi = data;
+ struct spi_geni_master *mas = spi_master_get_devdata(spi);
+ struct geni_se *se = &mas->se;
+ u32 m_irq;
+
+ m_irq = readl(se->base + SE_GENI_M_IRQ_STATUS);
+ if (!m_irq)
+ return IRQ_NONE;
+
+ if (m_irq & (M_CMD_OVERRUN_EN | M_ILLEGAL_CMD_EN | M_CMD_FAILURE_EN |
+ M_RX_FIFO_RD_ERR_EN | M_RX_FIFO_WR_ERR_EN |
+ M_TX_FIFO_RD_ERR_EN | M_TX_FIFO_WR_ERR_EN))
+ dev_warn(mas->dev, "Unexpected IRQ err status %#010x\n", m_irq);
+
+ spin_lock(&mas->lock);
+
+ if (mas->cur_xfer_mode == GENI_SE_FIFO) {
+ if ((m_irq & M_RX_FIFO_WATERMARK_EN) || (m_irq & M_RX_FIFO_LAST_EN))
+ geni_spi_handle_rx(mas);
+
+ if (m_irq & M_TX_FIFO_WATERMARK_EN)
+ geni_spi_handle_tx(mas);
+
+ if (m_irq & M_CMD_DONE_EN) {
+ if (mas->cur_xfer) {
+ spi_finalize_current_transfer(spi);
+ mas->cur_xfer = NULL;
+ /*
+ * If this happens, then a CMD_DONE came before all the
+ * Tx buffer bytes were sent out. This is unusual, log
+ * this condition and disable the WM interrupt to
+ * prevent the system from stalling due an interrupt
+ * storm.
+ *
+ * If this happens when all Rx bytes haven't been
+ * received, log the condition. The only known time
+ * this can happen is if bits_per_word != 8 and some
+ * registers that expect xfer lengths in num spi_words
+ * weren't written correctly.
+ */
+ if (mas->tx_rem_bytes) {
+ writel(0, se->base + SE_GENI_TX_WATERMARK_REG);
+ dev_err(mas->dev, "Premature done. tx_rem = %d bpw%d\n",
+ mas->tx_rem_bytes, mas->cur_bits_per_word);
+ }
+ if (mas->rx_rem_bytes)
+ dev_err(mas->dev, "Premature done. rx_rem = %d bpw%d\n",
+ mas->rx_rem_bytes, mas->cur_bits_per_word);
+ } else {
+ complete(&mas->cs_done);
+ }
+ }
+ } else if (mas->cur_xfer_mode == GENI_SE_DMA) {
+ const struct spi_transfer *xfer = mas->cur_xfer;
+ u32 dma_tx_status = readl_relaxed(se->base + SE_DMA_TX_IRQ_STAT);
+ u32 dma_rx_status = readl_relaxed(se->base + SE_DMA_RX_IRQ_STAT);
+
+ if (dma_tx_status)
+ writel(dma_tx_status, se->base + SE_DMA_TX_IRQ_CLR);
+ if (dma_rx_status)
+ writel(dma_rx_status, se->base + SE_DMA_RX_IRQ_CLR);
+ if (dma_tx_status & TX_DMA_DONE)
+ mas->tx_rem_bytes = 0;
+ if (dma_rx_status & RX_DMA_DONE)
+ mas->rx_rem_bytes = 0;
+ if (dma_tx_status & TX_RESET_DONE)
+ complete(&mas->tx_reset_done);
+ if (dma_rx_status & RX_RESET_DONE)
+ complete(&mas->rx_reset_done);
+ if (!mas->tx_rem_bytes && !mas->rx_rem_bytes && xfer) {
+ spi_finalize_current_transfer(spi);
+ mas->cur_xfer = NULL;
+ }
+ }
+
+ if (m_irq & M_CMD_CANCEL_EN)
+ complete(&mas->cancel_done);
+ if (m_irq & M_CMD_ABORT_EN)
+ complete(&mas->abort_done);
+
+ /*
+ * It's safe or a good idea to Ack all of our interrupts at the end
+ * of the function. Specifically:
+ * - M_CMD_DONE_EN / M_RX_FIFO_LAST_EN: Edge triggered interrupts and
+ * clearing Acks. Clearing at the end relies on nobody else having
+ * started a new transfer yet or else we could be clearing _their_
+ * done bit, but everyone grabs the spinlock before starting a new
+ * transfer.
+ * - M_RX_FIFO_WATERMARK_EN / M_TX_FIFO_WATERMARK_EN: These appear
+ * to be "latched level" interrupts so it's important to clear them
+ * _after_ you've handled the condition and always safe to do so
+ * since they'll re-assert if they're still happening.
+ */
+ writel(m_irq, se->base + SE_GENI_M_IRQ_CLEAR);
+
+ spin_unlock(&mas->lock);
+
+ return IRQ_HANDLED;
+}
+
+static int spi_geni_probe(struct platform_device *pdev)
+{
+ int ret, irq;
+ struct spi_master *spi;
+ struct spi_geni_master *mas;
+ void __iomem *base;
+ struct clk *clk;
+ struct device *dev = &pdev->dev;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
+ if (ret)
+ return dev_err_probe(dev, ret, "could not set DMA mask\n");
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ clk = devm_clk_get(dev, "se");
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ spi = devm_spi_alloc_master(dev, sizeof(*mas));
+ if (!spi)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, spi);
+ mas = spi_master_get_devdata(spi);
+ mas->irq = irq;
+ mas->dev = dev;
+ mas->se.dev = dev;
+ mas->se.wrapper = dev_get_drvdata(dev->parent);
+ mas->se.base = base;
+ mas->se.clk = clk;
+
+ ret = devm_pm_opp_set_clkname(&pdev->dev, "se");
+ if (ret)
+ return ret;
+ /* OPP table is optional */
+ ret = devm_pm_opp_of_add_table(&pdev->dev);
+ if (ret && ret != -ENODEV) {
+ dev_err(&pdev->dev, "invalid OPP table in device tree\n");
+ return ret;
+ }
+
+ spi->bus_num = -1;
+ spi->dev.of_node = dev->of_node;
+ spi->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP | SPI_CS_HIGH;
+ spi->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
+ spi->num_chipselect = 4;
+ spi->max_speed_hz = 50000000;
+ spi->max_dma_len = 0xffff0; /* 24 bits for tx/rx dma length */
+ spi->prepare_message = spi_geni_prepare_message;
+ spi->transfer_one = spi_geni_transfer_one;
+ spi->can_dma = geni_can_dma;
+ spi->dma_map_dev = dev->parent;
+ spi->auto_runtime_pm = true;
+ spi->handle_err = spi_geni_handle_err;
+ spi->use_gpio_descriptors = true;
+
+ init_completion(&mas->cs_done);
+ init_completion(&mas->cancel_done);
+ init_completion(&mas->abort_done);
+ init_completion(&mas->tx_reset_done);
+ init_completion(&mas->rx_reset_done);
+ spin_lock_init(&mas->lock);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 250);
+ pm_runtime_enable(dev);
+
+ if (device_property_read_bool(&pdev->dev, "spi-slave"))
+ spi->slave = true;
+
+ ret = geni_icc_get(&mas->se, NULL);
+ if (ret)
+ goto spi_geni_probe_runtime_disable;
+ /* Set the bus quota to a reasonable value for register access */
+ mas->se.icc_paths[GENI_TO_CORE].avg_bw = Bps_to_icc(CORE_2X_50_MHZ);
+ mas->se.icc_paths[CPU_TO_GENI].avg_bw = GENI_DEFAULT_BW;
+
+ ret = geni_icc_set_bw(&mas->se);
+ if (ret)
+ goto spi_geni_probe_runtime_disable;
+
+ ret = spi_geni_init(mas);
+ if (ret)
+ goto spi_geni_probe_runtime_disable;
+
+ /*
+ * check the mode supported and set_cs for fifo mode only
+ * for dma (gsi) mode, the gsi will set cs based on params passed in
+ * TRE
+ */
+ if (!spi->slave && mas->cur_xfer_mode == GENI_SE_FIFO)
+ spi->set_cs = spi_geni_set_cs;
+
+ /*
+ * TX is required per GSI spec, see setup_gsi_xfer().
+ */
+ if (mas->cur_xfer_mode == GENI_GPI_DMA)
+ spi->flags = SPI_CONTROLLER_MUST_TX;
+
+ ret = request_irq(mas->irq, geni_spi_isr, 0, dev_name(dev), spi);
+ if (ret)
+ goto spi_geni_release_dma;
+
+ ret = spi_register_master(spi);
+ if (ret)
+ goto spi_geni_probe_free_irq;
+
+ return 0;
+spi_geni_probe_free_irq:
+ free_irq(mas->irq, spi);
+spi_geni_release_dma:
+ spi_geni_release_dma_chan(mas);
+spi_geni_probe_runtime_disable:
+ pm_runtime_disable(dev);
+ return ret;
+}
+
+static void spi_geni_remove(struct platform_device *pdev)
+{
+ struct spi_master *spi = platform_get_drvdata(pdev);
+ struct spi_geni_master *mas = spi_master_get_devdata(spi);
+
+ /* Unregister _before_ disabling pm_runtime() so we stop transfers */
+ spi_unregister_master(spi);
+
+ spi_geni_release_dma_chan(mas);
+
+ free_irq(mas->irq, spi);
+ pm_runtime_disable(&pdev->dev);
+}
+
+static int __maybe_unused spi_geni_runtime_suspend(struct device *dev)
+{
+ struct spi_master *spi = dev_get_drvdata(dev);
+ struct spi_geni_master *mas = spi_master_get_devdata(spi);
+ int ret;
+
+ /* Drop the performance state vote */
+ dev_pm_opp_set_rate(dev, 0);
+
+ ret = geni_se_resources_off(&mas->se);
+ if (ret)
+ return ret;
+
+ return geni_icc_disable(&mas->se);
+}
+
+static int __maybe_unused spi_geni_runtime_resume(struct device *dev)
+{
+ struct spi_master *spi = dev_get_drvdata(dev);
+ struct spi_geni_master *mas = spi_master_get_devdata(spi);
+ int ret;
+
+ ret = geni_icc_enable(&mas->se);
+ if (ret)
+ return ret;
+
+ ret = geni_se_resources_on(&mas->se);
+ if (ret)
+ return ret;
+
+ return dev_pm_opp_set_rate(mas->dev, mas->cur_sclk_hz);
+}
+
+static int __maybe_unused spi_geni_suspend(struct device *dev)
+{
+ struct spi_master *spi = dev_get_drvdata(dev);
+ int ret;
+
+ ret = spi_master_suspend(spi);
+ if (ret)
+ return ret;
+
+ ret = pm_runtime_force_suspend(dev);
+ if (ret)
+ spi_master_resume(spi);
+
+ return ret;
+}
+
+static int __maybe_unused spi_geni_resume(struct device *dev)
+{
+ struct spi_master *spi = dev_get_drvdata(dev);
+ int ret;
+
+ ret = pm_runtime_force_resume(dev);
+ if (ret)
+ return ret;
+
+ ret = spi_master_resume(spi);
+ if (ret)
+ pm_runtime_force_suspend(dev);
+
+ return ret;
+}
+
+static const struct dev_pm_ops spi_geni_pm_ops = {
+ SET_RUNTIME_PM_OPS(spi_geni_runtime_suspend,
+ spi_geni_runtime_resume, NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(spi_geni_suspend, spi_geni_resume)
+};
+
+static const struct of_device_id spi_geni_dt_match[] = {
+ { .compatible = "qcom,geni-spi" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, spi_geni_dt_match);
+
+static struct platform_driver spi_geni_driver = {
+ .probe = spi_geni_probe,
+ .remove_new = spi_geni_remove,
+ .driver = {
+ .name = "geni_spi",
+ .pm = &spi_geni_pm_ops,
+ .of_match_table = spi_geni_dt_match,
+ },
+};
+module_platform_driver(spi_geni_driver);
+
+MODULE_DESCRIPTION("SPI driver for GENI based QUP cores");
+MODULE_LICENSE("GPL v2");