Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 211 insertions, 0 deletions

diff --git a/drivers/spi/spi-rb4xx.c b/drivers/spi/spi-rb4xx.c
new file mode 100644
index 0000000000..225f755507
--- /dev/null
+++ b/drivers/spi/spi-rb4xx.c
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SPI controller driver for the Mikrotik RB4xx boards
+ *
+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2015 Bert Vermeulen <bert@biot.com>
+ *
+ * This file was based on the patches for Linux 2.6.27.39 published by
+ * MikroTik for their RouterBoard 4xx series devices.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/of.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+struct rb4xx_spi {
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static inline u32 rb4xx_read(struct rb4xx_spi *rbspi, u32 reg)
+{
+	return __raw_readl(rbspi->base + reg);
+}
+
+static inline void rb4xx_write(struct rb4xx_spi *rbspi, u32 reg, u32 value)
+{
+	__raw_writel(value, rbspi->base + reg);
+}
+
+static inline void do_spi_clk(struct rb4xx_spi *rbspi, u32 spi_ioc, int value)
+{
+	u32 regval;
+
+	regval = spi_ioc;
+	if (value & BIT(0))
+		regval |= AR71XX_SPI_IOC_DO;
+
+	rb4xx_write(rbspi, AR71XX_SPI_REG_IOC, regval);
+	rb4xx_write(rbspi, AR71XX_SPI_REG_IOC, regval | AR71XX_SPI_IOC_CLK);
+}
+
+static void do_spi_byte(struct rb4xx_spi *rbspi, u32 spi_ioc, u8 byte)
+{
+	int i;
+
+	for (i = 7; i >= 0; i--)
+		do_spi_clk(rbspi, spi_ioc, byte >> i);
+}
+
+/* The CS2 pin is used to clock in a second bit per clock cycle. */
+static inline void do_spi_clk_two(struct rb4xx_spi *rbspi, u32 spi_ioc,
+				   u8 value)
+{
+	u32 regval;
+
+	regval = spi_ioc;
+	if (value & BIT(1))
+		regval |= AR71XX_SPI_IOC_DO;
+	if (value & BIT(0))
+		regval |= AR71XX_SPI_IOC_CS2;
+
+	rb4xx_write(rbspi, AR71XX_SPI_REG_IOC, regval);
+	rb4xx_write(rbspi, AR71XX_SPI_REG_IOC, regval | AR71XX_SPI_IOC_CLK);
+}
+
+/* Two bits at a time, msb first */
+static void do_spi_byte_two(struct rb4xx_spi *rbspi, u32 spi_ioc, u8 byte)
+{
+	do_spi_clk_two(rbspi, spi_ioc, byte >> 6);
+	do_spi_clk_two(rbspi, spi_ioc, byte >> 4);
+	do_spi_clk_two(rbspi, spi_ioc, byte >> 2);
+	do_spi_clk_two(rbspi, spi_ioc, byte >> 0);
+}
+
+static void rb4xx_set_cs(struct spi_device *spi, bool enable)
+{
+	struct rb4xx_spi *rbspi = spi_controller_get_devdata(spi->controller);
+
+	/*
+	 * Setting CS is done along with bitbanging the actual values,
+	 * since it's all on the same hardware register. However the
+	 * CPLD needs CS deselected after every command.
+	 */
+	if (enable)
+		rb4xx_write(rbspi, AR71XX_SPI_REG_IOC,
+			    AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1);
+}
+
+static int rb4xx_transfer_one(struct spi_controller *host,
+			      struct spi_device *spi, struct spi_transfer *t)
+{
+	struct rb4xx_spi *rbspi = spi_controller_get_devdata(host);
+	int i;
+	u32 spi_ioc;
+	u8 *rx_buf;
+	const u8 *tx_buf;
+
+	/*
+	 * Prime the SPI register with the SPI device selected. The m25p80 boot
+	 * flash and CPLD share the CS0 pin. This works because the CPLD's
+	 * command set was designed to almost not clash with that of the
+	 * boot flash.
+	 */
+	if (spi_get_chipselect(spi, 0) == 2)
+		/* MMC */
+		spi_ioc = AR71XX_SPI_IOC_CS0;
+	else
+		/* Boot flash and CPLD */
+		spi_ioc = AR71XX_SPI_IOC_CS1;
+
+	tx_buf = t->tx_buf;
+	rx_buf = t->rx_buf;
+	for (i = 0; i < t->len; ++i) {
+		if (t->tx_nbits == SPI_NBITS_DUAL)
+			/* CPLD can use two-wire transfers */
+			do_spi_byte_two(rbspi, spi_ioc, tx_buf[i]);
+		else
+			do_spi_byte(rbspi, spi_ioc, tx_buf[i]);
+		if (!rx_buf)
+			continue;
+		rx_buf[i] = rb4xx_read(rbspi, AR71XX_SPI_REG_RDS);
+	}
+	spi_finalize_current_transfer(host);
+
+	return 0;
+}
+
+static int rb4xx_spi_probe(struct platform_device *pdev)
+{
+	struct spi_controller *host;
+	struct clk *ahb_clk;
+	struct rb4xx_spi *rbspi;
+	int err;
+	void __iomem *spi_base;
+
+	spi_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(spi_base))
+		return PTR_ERR(spi_base);
+
+	host = devm_spi_alloc_host(&pdev->dev, sizeof(*rbspi));
+	if (!host)
+		return -ENOMEM;
+
+	ahb_clk = devm_clk_get(&pdev->dev, "ahb");
+	if (IS_ERR(ahb_clk))
+		return PTR_ERR(ahb_clk);
+
+	host->dev.of_node = pdev->dev.of_node;
+	host->bus_num = 0;
+	host->num_chipselect = 3;
+	host->mode_bits = SPI_TX_DUAL;
+	host->bits_per_word_mask = SPI_BPW_MASK(8);
+	host->flags = SPI_CONTROLLER_MUST_TX;
+	host->transfer_one = rb4xx_transfer_one;
+	host->set_cs = rb4xx_set_cs;
+
+	rbspi = spi_controller_get_devdata(host);
+	rbspi->base = spi_base;
+	rbspi->clk = ahb_clk;
+	platform_set_drvdata(pdev, rbspi);
+
+	err = devm_spi_register_controller(&pdev->dev, host);
+	if (err) {
+		dev_err(&pdev->dev, "failed to register SPI host\n");
+		return err;
+	}
+
+	err = clk_prepare_enable(ahb_clk);
+	if (err)
+		return err;
+
+	/* Enable SPI */
+	rb4xx_write(rbspi, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
+
+	return 0;
+}
+
+static void rb4xx_spi_remove(struct platform_device *pdev)
+{
+	struct rb4xx_spi *rbspi = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(rbspi->clk);
+}
+
+static const struct of_device_id rb4xx_spi_dt_match[] = {
+	{ .compatible = "mikrotik,rb4xx-spi" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rb4xx_spi_dt_match);
+
+static struct platform_driver rb4xx_spi_drv = {
+	.probe = rb4xx_spi_probe,
+	.remove_new = rb4xx_spi_remove,
+	.driver = {
+		.name = "rb4xx-spi",
+		.of_match_table = of_match_ptr(rb4xx_spi_dt_match),
+	},
+};
+
+module_platform_driver(rb4xx_spi_drv);
+
+MODULE_DESCRIPTION("Mikrotik RB4xx SPI controller driver");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_AUTHOR("Bert Vermeulen <bert@biot.com>");
+MODULE_LICENSE("GPL v2");