Adding upstream version 6.9.7.upstream/6.9.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 308 insertions, 210 deletions

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index a7194f29c2..c349d60126 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -459,7 +459,7 @@ static void spi_shutdown(struct device *dev)
 	}
 }
 
-struct bus_type spi_bus_type = {
+const struct bus_type spi_bus_type = {
 	.name		= "spi",
 	.dev_groups	= spi_dev_groups,
 	.match		= spi_match_device,
@@ -584,7 +584,7 @@ struct spi_device *spi_alloc_device(struct spi_controller *ctlr)
 		return NULL;
 	}
 
-	spi->master = spi->controller = ctlr;
+	spi->controller = ctlr;
 	spi->dev.parent = &ctlr->dev;
 	spi->dev.bus = &spi_bus_type;
 	spi->dev.release = spidev_release;
@@ -608,23 +608,51 @@ static void spi_dev_set_name(struct spi_device *spi)
 		     spi_get_chipselect(spi, 0));
 }
 
+/*
+ * Zero(0) is a valid physical CS value and can be located at any
+ * logical CS in the spi->chip_select[]. If all the physical CS
+ * are initialized to 0 then It would be difficult to differentiate
+ * between a valid physical CS 0 & an unused logical CS whose physical
+ * CS can be 0. As a solution to this issue initialize all the CS to -1.
+ * Now all the unused logical CS will have -1 physical CS value & can be
+ * ignored while performing physical CS validity checks.
+ */
+#define SPI_INVALID_CS		((s8)-1)
+
+static inline bool is_valid_cs(s8 chip_select)
+{
+	return chip_select != SPI_INVALID_CS;
+}
+
+static inline int spi_dev_check_cs(struct device *dev,
+				   struct spi_device *spi, u8 idx,
+				   struct spi_device *new_spi, u8 new_idx)
+{
+	u8 cs, cs_new;
+	u8 idx_new;
+
+	cs = spi_get_chipselect(spi, idx);
+	for (idx_new = new_idx; idx_new < SPI_CS_CNT_MAX; idx_new++) {
+		cs_new = spi_get_chipselect(new_spi, idx_new);
+		if (is_valid_cs(cs) && is_valid_cs(cs_new) && cs == cs_new) {
+			dev_err(dev, "chipselect %u already in use\n", cs_new);
+			return -EBUSY;
+		}
+	}
+	return 0;
+}
+
 static int spi_dev_check(struct device *dev, void *data)
 {
 	struct spi_device *spi = to_spi_device(dev);
 	struct spi_device *new_spi = data;
-	int idx, nw_idx;
-	u8 cs, cs_nw;
+	int status, idx;
 
 	if (spi->controller == new_spi->controller) {
 		for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
-			cs = spi_get_chipselect(spi, idx);
-			for (nw_idx = 0; nw_idx < SPI_CS_CNT_MAX; nw_idx++) {
-				cs_nw = spi_get_chipselect(new_spi, nw_idx);
-				if (cs != 0xFF && cs_nw != 0xFF && cs == cs_nw) {
-					dev_err(dev, "chipselect %d already in use\n", cs_nw);
-					return -EBUSY;
-				}
-			}
+			status = spi_dev_check_cs(dev, spi, idx, new_spi, 0);
+			if (status)
+				return status;
 		}
 	}
 	return 0;
@@ -640,13 +668,13 @@ static int __spi_add_device(struct spi_device *spi)
 {
 	struct spi_controller *ctlr = spi->controller;
 	struct device *dev = ctlr->dev.parent;
-	int status, idx, nw_idx;
-	u8 cs, nw_cs;
+	int status, idx;
+	u8 cs;
 
 	for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
 		/* Chipselects are numbered 0..max; validate. */
 		cs = spi_get_chipselect(spi, idx);
-		if (cs != 0xFF && cs >= ctlr->num_chipselect) {
+		if (is_valid_cs(cs) && cs >= ctlr->num_chipselect) {
 			dev_err(dev, "cs%d >= max %d\n", spi_get_chipselect(spi, idx),
 				ctlr->num_chipselect);
 			return -EINVAL;
@@ -657,14 +685,11 @@ static int __spi_add_device(struct spi_device *spi)
 	 * Make sure that multiple logical CS doesn't map to the same physical CS.
 	 * For example, spi->chip_select[0] != spi->chip_select[1] and so on.
 	 */
-	for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
-		cs = spi_get_chipselect(spi, idx);
-		for (nw_idx = idx + 1; nw_idx < SPI_CS_CNT_MAX; nw_idx++) {
-			nw_cs = spi_get_chipselect(spi, nw_idx);
-			if (cs != 0xFF && nw_cs != 0xFF && cs == nw_cs) {
-				dev_err(dev, "chipselect %d already in use\n", nw_cs);
-				return -EBUSY;
-			}
+	if (!spi_controller_is_target(ctlr)) {
+		for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
+			status = spi_dev_check_cs(dev, spi, idx, spi, idx + 1);
+			if (status)
+				return status;
 		}
 	}
 
@@ -691,7 +716,7 @@ static int __spi_add_device(struct spi_device *spi)
 
 		for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
 			cs = spi_get_chipselect(spi, idx);
-			if (cs != 0xFF)
+			if (is_valid_cs(cs))
 				spi_set_csgpiod(spi, idx, ctlr->cs_gpiods[cs]);
 		}
 	}
@@ -745,6 +770,14 @@ int spi_add_device(struct spi_device *spi)
 }
 EXPORT_SYMBOL_GPL(spi_add_device);
 
+static void spi_set_all_cs_unused(struct spi_device *spi)
+{
+	u8 idx;
+
+	for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
+		spi_set_chipselect(spi, idx, SPI_INVALID_CS);
+}
+
 /**
  * spi_new_device - instantiate one new SPI device
  * @ctlr: Controller to which device is connected
@@ -764,7 +797,6 @@ struct spi_device *spi_new_device(struct spi_controller *ctlr,
 {
 	struct spi_device	*proxy;
 	int			status;
-	u8                      idx;
 
 	/*
 	 * NOTE:  caller did any chip->bus_num checks necessary.
@@ -780,19 +812,10 @@ struct spi_device *spi_new_device(struct spi_controller *ctlr,
 
 	WARN_ON(strlen(chip->modalias) >= sizeof(proxy->modalias));
 
-	/*
-	 * Zero(0) is a valid physical CS value and can be located at any
-	 * logical CS in the spi->chip_select[]. If all the physical CS
-	 * are initialized to 0 then It would be difficult to differentiate
-	 * between a valid physical CS 0 & an unused logical CS whose physical
-	 * CS can be 0. As a solution to this issue initialize all the CS to 0xFF.
-	 * Now all the unused logical CS will have 0xFF physical CS value & can be
-	 * ignore while performing physical CS validity checks.
-	 */
-	for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
-		spi_set_chipselect(proxy, idx, 0xFF);
-
+	/* Use provided chip-select for proxy device */
+	spi_set_all_cs_unused(proxy);
 	spi_set_chipselect(proxy, 0, chip->chip_select);
+
 	proxy->max_speed_hz = chip->max_speed_hz;
 	proxy->mode = chip->mode;
 	proxy->irq = chip->irq;
@@ -1007,7 +1030,7 @@ static inline bool spi_is_last_cs(struct spi_device *spi)
 	bool last = false;
 
 	for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
-		if ((spi->cs_index_mask >> idx) & 0x01) {
+		if (spi->cs_index_mask & BIT(idx)) {
 			if (spi->controller->last_cs[idx] == spi_get_chipselect(spi, idx))
 				last = true;
 		}
@@ -1036,7 +1059,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
 
 	spi->controller->last_cs_index_mask = spi->cs_index_mask;
 	for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
-		spi->controller->last_cs[idx] = enable ? spi_get_chipselect(spi, 0) : -1;
+		spi->controller->last_cs[idx] = enable ? spi_get_chipselect(spi, 0) : SPI_INVALID_CS;
 	spi->controller->last_cs_mode_high = spi->mode & SPI_CS_HIGH;
 
 	if (spi->mode & SPI_CS_HIGH)
@@ -1062,8 +1085,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
 			 * into account.
 			 */
 			for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) {
-				if (((spi->cs_index_mask >> idx) & 0x01) &&
-				    spi_get_csgpiod(spi, idx)) {
+				if ((spi->cs_index_mask & BIT(idx)) && spi_get_csgpiod(spi, idx)) {
 					if (has_acpi_companion(&spi->dev))
 						gpiod_set_value_cansleep(spi_get_csgpiod(spi, idx),
 									 !enable);
@@ -1222,6 +1244,7 @@ static int __spi_map_msg(struct spi_controller *ctlr, struct spi_message *msg)
 	else
 		rx_dev = ctlr->dev.parent;
 
+	ret = -ENOMSG;
 	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
 		/* The sync is done before each transfer. */
 		unsigned long attrs = DMA_ATTR_SKIP_CPU_SYNC;
@@ -1251,6 +1274,9 @@ static int __spi_map_msg(struct spi_controller *ctlr, struct spi_message *msg)
 			}
 		}
 	}
+	/* No transfer has been mapped, bail out with success */
+	if (ret)
+		return 0;
 
 	ctlr->cur_rx_dma_dev = rx_dev;
 	ctlr->cur_tx_dma_dev = tx_dev;
@@ -1751,39 +1777,6 @@ static int __spi_pump_transfer_message(struct spi_controller *ctlr,
 
 	trace_spi_message_start(msg);
 
-	/*
-	 * If an SPI controller does not support toggling the CS line on each
-	 * transfer (indicated by the SPI_CS_WORD flag) or we are using a GPIO
-	 * for the CS line, we can emulate the CS-per-word hardware function by
-	 * splitting transfers into one-word transfers and ensuring that
-	 * cs_change is set for each transfer.
-	 */
-	if ((msg->spi->mode & SPI_CS_WORD) && (!(ctlr->mode_bits & SPI_CS_WORD) ||
-					       spi_is_csgpiod(msg->spi))) {
-		ret = spi_split_transfers_maxwords(ctlr, msg, 1, GFP_KERNEL);
-		if (ret) {
-			msg->status = ret;
-			spi_finalize_current_message(ctlr);
-			return ret;
-		}
-
-		list_for_each_entry(xfer, &msg->transfers, transfer_list) {
-			/* Don't change cs_change on the last entry in the list */
-			if (list_is_last(&xfer->transfer_list, &msg->transfers))
-				break;
-			xfer->cs_change = 1;
-		}
-	} else {
-		ret = spi_split_transfers_maxsize(ctlr, msg,
-						  spi_max_transfer_size(msg->spi),
-						  GFP_KERNEL | GFP_DMA);
-		if (ret) {
-			msg->status = ret;
-			spi_finalize_current_message(ctlr);
-			return ret;
-		}
-	}
-
 	if (ctlr->prepare_message) {
 		ret = ctlr->prepare_message(ctlr, msg);
 		if (ret) {
@@ -2111,6 +2104,43 @@ struct spi_message *spi_get_next_queued_message(struct spi_controller *ctlr)
 }
 EXPORT_SYMBOL_GPL(spi_get_next_queued_message);
 
+/*
+ * __spi_unoptimize_message - shared implementation of spi_unoptimize_message()
+ *                            and spi_maybe_unoptimize_message()
+ * @msg: the message to unoptimize
+ *
+ * Peripheral drivers should use spi_unoptimize_message() and callers inside
+ * core should use spi_maybe_unoptimize_message() rather than calling this
+ * function directly.
+ *
+ * It is not valid to call this on a message that is not currently optimized.
+ */
+static void __spi_unoptimize_message(struct spi_message *msg)
+{
+	struct spi_controller *ctlr = msg->spi->controller;
+
+	if (ctlr->unoptimize_message)
+		ctlr->unoptimize_message(msg);
+
+	spi_res_release(ctlr, msg);
+
+	msg->optimized = false;
+	msg->opt_state = NULL;
+}
+
+/*
+ * spi_maybe_unoptimize_message - unoptimize msg not managed by a peripheral
+ * @msg: the message to unoptimize
+ *
+ * This function is used to unoptimize a message if and only if it was
+ * optimized by the core (via spi_maybe_optimize_message()).
+ */
+static void spi_maybe_unoptimize_message(struct spi_message *msg)
+{
+	if (!msg->pre_optimized && msg->optimized)
+		__spi_unoptimize_message(msg);
+}
+
 /**
  * spi_finalize_current_message() - the current message is complete
  * @ctlr: the controller to return the message to
@@ -2139,15 +2169,6 @@ void spi_finalize_current_message(struct spi_controller *ctlr)
 
 	spi_unmap_msg(ctlr, mesg);
 
-	/*
-	 * In the prepare_messages callback the SPI bus has the opportunity
-	 * to split a transfer to smaller chunks.
-	 *
-	 * Release the split transfers here since spi_map_msg() is done on
-	 * the split transfers.
-	 */
-	spi_res_release(ctlr, mesg);
-
 	if (mesg->prepared && ctlr->unprepare_message) {
 		ret = ctlr->unprepare_message(ctlr, mesg);
 		if (ret) {
@@ -2158,6 +2179,8 @@ void spi_finalize_current_message(struct spi_controller *ctlr)
 
 	mesg->prepared = false;
 
+	spi_maybe_unoptimize_message(mesg);
+
 	WRITE_ONCE(ctlr->cur_msg_incomplete, false);
 	smp_mb(); /* See __spi_pump_transfer_message()... */
 	if (READ_ONCE(ctlr->cur_msg_need_completion))
@@ -2425,17 +2448,7 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
 		return -EINVAL;
 	}
 
-	/*
-	 * Zero(0) is a valid physical CS value and can be located at any
-	 * logical CS in the spi->chip_select[]. If all the physical CS
-	 * are initialized to 0 then It would be difficult to differentiate
-	 * between a valid physical CS 0 & an unused logical CS whose physical
-	 * CS can be 0. As a solution to this issue initialize all the CS to 0xFF.
-	 * Now all the unused logical CS will have 0xFF physical CS value & can be
-	 * ignore while performing physical CS validity checks.
-	 */
-	for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
-		spi_set_chipselect(spi, idx, 0xFF);
+	spi_set_all_cs_unused(spi);
 
 	/* Device address */
 	rc = of_property_read_variable_u32_array(nc, "reg", &cs[0], 1,
@@ -2459,14 +2472,10 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
 		spi_set_chipselect(spi, idx, cs[idx]);
 
 	/*
-	 * spi->chip_select[i] gives the corresponding physical CS for logical CS i
-	 * logical CS number is represented by setting the ith bit in spi->cs_index_mask
-	 * So, for example, if spi->cs_index_mask = 0x01 then logical CS number is 0 and
-	 * spi->chip_select[0] will give the physical CS.
-	 * By default spi->chip_select[0] will hold the physical CS number so, set
-	 * spi->cs_index_mask as 0x01.
+	 * By default spi->chip_select[0] will hold the physical CS number,
+	 * so set bit 0 in spi->cs_index_mask.
 	 */
-	spi->cs_index_mask = 0x01;
+	spi->cs_index_mask = BIT(0);
 
 	/* Device speed */
 	if (!of_property_read_u32(nc, "spi-max-frequency", &value))
@@ -2572,7 +2581,6 @@ struct spi_device *spi_new_ancillary_device(struct spi_device *spi,
 	struct spi_controller *ctlr = spi->controller;
 	struct spi_device *ancillary;
 	int rc = 0;
-	u8 idx;
 
 	/* Alloc an spi_device */
 	ancillary = spi_alloc_device(ctlr);
@@ -2583,33 +2591,18 @@ struct spi_device *spi_new_ancillary_device(struct spi_device *spi,
 
 	strscpy(ancillary->modalias, "dummy", sizeof(ancillary->modalias));
 
-	/*
-	 * Zero(0) is a valid physical CS value and can be located at any
-	 * logical CS in the spi->chip_select[]. If all the physical CS
-	 * are initialized to 0 then It would be difficult to differentiate
-	 * between a valid physical CS 0 & an unused logical CS whose physical
-	 * CS can be 0. As a solution to this issue initialize all the CS to 0xFF.
-	 * Now all the unused logical CS will have 0xFF physical CS value & can be
-	 * ignore while performing physical CS validity checks.
-	 */
-	for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
-		spi_set_chipselect(ancillary, idx, 0xFF);
-
 	/* Use provided chip-select for ancillary device */
+	spi_set_all_cs_unused(ancillary);
 	spi_set_chipselect(ancillary, 0, chip_select);
 
 	/* Take over SPI mode/speed from SPI main device */
 	ancillary->max_speed_hz = spi->max_speed_hz;
 	ancillary->mode = spi->mode;
 	/*
-	 * spi->chip_select[i] gives the corresponding physical CS for logical CS i
-	 * logical CS number is represented by setting the ith bit in spi->cs_index_mask
-	 * So, for example, if spi->cs_index_mask = 0x01 then logical CS number is 0 and
-	 * spi->chip_select[0] will give the physical CS.
-	 * By default spi->chip_select[0] will hold the physical CS number so, set
-	 * spi->cs_index_mask as 0x01.
+	 * By default spi->chip_select[0] will hold the physical CS number,
+	 * so set bit 0 in spi->cs_index_mask.
 	 */
-	ancillary->cs_index_mask = 0x01;
+	ancillary->cs_index_mask = BIT(0);
 
 	WARN_ON(!mutex_is_locked(&ctlr->add_lock));
 
@@ -2812,7 +2805,6 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
 	struct acpi_spi_lookup lookup = {};
 	struct spi_device *spi;
 	int ret;
-	u8 idx;
 
 	if (!ctlr && index == -1)
 		return ERR_PTR(-EINVAL);
@@ -2848,33 +2840,19 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
 		return ERR_PTR(-ENOMEM);
 	}
 
-	/*
-	 * Zero(0) is a valid physical CS value and can be located at any
-	 * logical CS in the spi->chip_select[]. If all the physical CS
-	 * are initialized to 0 then It would be difficult to differentiate
-	 * between a valid physical CS 0 & an unused logical CS whose physical
-	 * CS can be 0. As a solution to this issue initialize all the CS to 0xFF.
-	 * Now all the unused logical CS will have 0xFF physical CS value & can be
-	 * ignore while performing physical CS validity checks.
-	 */
-	for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
-		spi_set_chipselect(spi, idx, 0xFF);
+	spi_set_all_cs_unused(spi);
+	spi_set_chipselect(spi, 0, lookup.chip_select);
 
 	ACPI_COMPANION_SET(&spi->dev, adev);
 	spi->max_speed_hz	= lookup.max_speed_hz;
 	spi->mode		|= lookup.mode;
 	spi->irq		= lookup.irq;
 	spi->bits_per_word	= lookup.bits_per_word;
-	spi_set_chipselect(spi, 0, lookup.chip_select);
 	/*
-	 * spi->chip_select[i] gives the corresponding physical CS for logical CS i
-	 * logical CS number is represented by setting the ith bit in spi->cs_index_mask
-	 * So, for example, if spi->cs_index_mask = 0x01 then logical CS number is 0 and
-	 * spi->chip_select[0] will give the physical CS.
-	 * By default spi->chip_select[0] will hold the physical CS number so, set
-	 * spi->cs_index_mask as 0x01.
+	 * By default spi->chip_select[0] will hold the physical CS number,
+	 * so set bit 0 in spi->cs_index_mask.
 	 */
-	spi->cs_index_mask	= 0x01;
+	spi->cs_index_mask	= BIT(0);
 
 	return spi;
 }
@@ -3372,9 +3350,9 @@ int spi_register_controller(struct spi_controller *ctlr)
 		goto free_bus_id;
 	}
 
-	/* Setting last_cs to -1 means no chip selected */
+	/* Setting last_cs to SPI_INVALID_CS means no chip selected */
 	for (idx = 0; idx < SPI_CS_CNT_MAX; idx++)
-		ctlr->last_cs[idx] = -1;
+		ctlr->last_cs[idx] = SPI_INVALID_CS;
 
 	status = device_add(&ctlr->dev);
 	if (status < 0)
@@ -3715,8 +3693,7 @@ static struct spi_replaced_transfers *spi_replace_transfers(
 static int __spi_split_transfer_maxsize(struct spi_controller *ctlr,
 					struct spi_message *msg,
 					struct spi_transfer **xferp,
-					size_t maxsize,
-					gfp_t gfp)
+					size_t maxsize)
 {
 	struct spi_transfer *xfer = *xferp, *xfers;
 	struct spi_replaced_transfers *srt;
@@ -3727,7 +3704,7 @@ static int __spi_split_transfer_maxsize(struct spi_controller *ctlr,
 	count = DIV_ROUND_UP(xfer->len, maxsize);
 
 	/* Create replacement */
-	srt = spi_replace_transfers(msg, xfer, 1, count, NULL, 0, gfp);
+	srt = spi_replace_transfers(msg, xfer, 1, count, NULL, 0, GFP_KERNEL);
 	if (IS_ERR(srt))
 		return PTR_ERR(srt);
 	xfers = srt->inserted_transfers;
@@ -3787,14 +3764,16 @@ static int __spi_split_transfer_maxsize(struct spi_controller *ctlr,
  * @ctlr:    the @spi_controller for this transfer
  * @msg:   the @spi_message to transform
  * @maxsize:  the maximum when to apply this
- * @gfp: GFP allocation flags
+ *
+ * This function allocates resources that are automatically freed during the
+ * spi message unoptimize phase so this function should only be called from
+ * optimize_message callbacks.
  *
  * Return: status of transformation
  */
 int spi_split_transfers_maxsize(struct spi_controller *ctlr,
 				struct spi_message *msg,
-				size_t maxsize,
-				gfp_t gfp)
+				size_t maxsize)
 {
 	struct spi_transfer *xfer;
 	int ret;
@@ -3809,7 +3788,7 @@ int spi_split_transfers_maxsize(struct spi_controller *ctlr,
 	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
 		if (xfer->len > maxsize) {
 			ret = __spi_split_transfer_maxsize(ctlr, msg, &xfer,
-							   maxsize, gfp);
+							   maxsize);
 			if (ret)
 				return ret;
 		}
@@ -3827,14 +3806,16 @@ EXPORT_SYMBOL_GPL(spi_split_transfers_maxsize);
  * @ctlr:     the @spi_controller for this transfer
  * @msg:      the @spi_message to transform
  * @maxwords: the number of words to limit each transfer to
- * @gfp:      GFP allocation flags
+ *
+ * This function allocates resources that are automatically freed during the
+ * spi message unoptimize phase so this function should only be called from
+ * optimize_message callbacks.
  *
  * Return: status of transformation
  */
 int spi_split_transfers_maxwords(struct spi_controller *ctlr,
 				 struct spi_message *msg,
-				 size_t maxwords,
-				 gfp_t gfp)
+				 size_t maxwords)
 {
 	struct spi_transfer *xfer;
 
@@ -3852,7 +3833,7 @@ int spi_split_transfers_maxwords(struct spi_controller *ctlr,
 		maxsize = maxwords * roundup_pow_of_two(BITS_TO_BYTES(xfer->bits_per_word));
 		if (xfer->len > maxsize) {
 			ret = __spi_split_transfer_maxsize(ctlr, msg, &xfer,
-							   maxsize, gfp);
+							   maxsize);
 			if (ret)
 				return ret;
 		}
@@ -4204,6 +4185,167 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message)
 	return 0;
 }
 
+/*
+ * spi_split_transfers - generic handling of transfer splitting
+ * @msg: the message to split
+ *
+ * Under certain conditions, a SPI controller may not support arbitrary
+ * transfer sizes or other features required by a peripheral. This function
+ * will split the transfers in the message into smaller transfers that are
+ * supported by the controller.
+ *
+ * Controllers with special requirements not covered here can also split
+ * transfers in the optimize_message() callback.
+ *
+ * Context: can sleep
+ * Return: zero on success, else a negative error code
+ */
+static int spi_split_transfers(struct spi_message *msg)
+{
+	struct spi_controller *ctlr = msg->spi->controller;
+	struct spi_transfer *xfer;
+	int ret;
+
+	/*
+	 * If an SPI controller does not support toggling the CS line on each
+	 * transfer (indicated by the SPI_CS_WORD flag) or we are using a GPIO
+	 * for the CS line, we can emulate the CS-per-word hardware function by
+	 * splitting transfers into one-word transfers and ensuring that
+	 * cs_change is set for each transfer.
+	 */
+	if ((msg->spi->mode & SPI_CS_WORD) &&
+	    (!(ctlr->mode_bits & SPI_CS_WORD) || spi_is_csgpiod(msg->spi))) {
+		ret = spi_split_transfers_maxwords(ctlr, msg, 1);
+		if (ret)
+			return ret;
+
+		list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+			/* Don't change cs_change on the last entry in the list */
+			if (list_is_last(&xfer->transfer_list, &msg->transfers))
+				break;
+
+			xfer->cs_change = 1;
+		}
+	} else {
+		ret = spi_split_transfers_maxsize(ctlr, msg,
+						  spi_max_transfer_size(msg->spi));
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * __spi_optimize_message - shared implementation for spi_optimize_message()
+ *                          and spi_maybe_optimize_message()
+ * @spi: the device that will be used for the message
+ * @msg: the message to optimize
+ *
+ * Peripheral drivers will call spi_optimize_message() and the spi core will
+ * call spi_maybe_optimize_message() instead of calling this directly.
+ *
+ * It is not valid to call this on a message that has already been optimized.
+ *
+ * Return: zero on success, else a negative error code
+ */
+static int __spi_optimize_message(struct spi_device *spi,
+				  struct spi_message *msg)
+{
+	struct spi_controller *ctlr = spi->controller;
+	int ret;
+
+	ret = __spi_validate(spi, msg);
+	if (ret)
+		return ret;
+
+	ret = spi_split_transfers(msg);
+	if (ret)
+		return ret;
+
+	if (ctlr->optimize_message) {
+		ret = ctlr->optimize_message(msg);
+		if (ret) {
+			spi_res_release(ctlr, msg);
+			return ret;
+		}
+	}
+
+	msg->optimized = true;
+
+	return 0;
+}
+
+/*
+ * spi_maybe_optimize_message - optimize message if it isn't already pre-optimized
+ * @spi: the device that will be used for the message
+ * @msg: the message to optimize
+ * Return: zero on success, else a negative error code
+ */
+static int spi_maybe_optimize_message(struct spi_device *spi,
+				      struct spi_message *msg)
+{
+	if (msg->pre_optimized)
+		return 0;
+
+	return __spi_optimize_message(spi, msg);
+}
+
+/**
+ * spi_optimize_message - do any one-time validation and setup for a SPI message
+ * @spi: the device that will be used for the message
+ * @msg: the message to optimize
+ *
+ * Peripheral drivers that reuse the same message repeatedly may call this to
+ * perform as much message prep as possible once, rather than repeating it each
+ * time a message transfer is performed to improve throughput and reduce CPU
+ * usage.
+ *
+ * Once a message has been optimized, it cannot be modified with the exception
+ * of updating the contents of any xfer->tx_buf (the pointer can't be changed,
+ * only the data in the memory it points to).
+ *
+ * Calls to this function must be balanced with calls to spi_unoptimize_message()
+ * to avoid leaking resources.
+ *
+ * Context: can sleep
+ * Return: zero on success, else a negative error code
+ */
+int spi_optimize_message(struct spi_device *spi, struct spi_message *msg)
+{
+	int ret;
+
+	ret = __spi_optimize_message(spi, msg);
+	if (ret)
+		return ret;
+
+	/*
+	 * This flag indicates that the peripheral driver called spi_optimize_message()
+	 * and therefore we shouldn't unoptimize message automatically when finalizing
+	 * the message but rather wait until spi_unoptimize_message() is called
+	 * by the peripheral driver.
+	 */
+	msg->pre_optimized = true;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(spi_optimize_message);
+
+/**
+ * spi_unoptimize_message - releases any resources allocated by spi_optimize_message()
+ * @msg: the message to unoptimize
+ *
+ * Calls to this function must be balanced with calls to spi_optimize_message().
+ *
+ * Context: can sleep
+ */
+void spi_unoptimize_message(struct spi_message *msg)
+{
+	__spi_unoptimize_message(msg);
+	msg->pre_optimized = false;
+}
+EXPORT_SYMBOL_GPL(spi_unoptimize_message);
+
 static int __spi_async(struct spi_device *spi, struct spi_message *message)
 {
 	struct spi_controller *ctlr = spi->controller;
@@ -4268,8 +4410,8 @@ int spi_async(struct spi_device *spi, struct spi_message *message)
 	int ret;
 	unsigned long flags;
 
-	ret = __spi_validate(spi, message);
-	if (ret != 0)
+	ret = spi_maybe_optimize_message(spi, message);
+	if (ret)
 		return ret;
 
 	spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags);
@@ -4281,60 +4423,11 @@ int spi_async(struct spi_device *spi, struct spi_message *message)
 
 	spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags);
 
-	return ret;
-}
-EXPORT_SYMBOL_GPL(spi_async);
-
-/**
- * spi_async_locked - version of spi_async with exclusive bus usage
- * @spi: device with which data will be exchanged
- * @message: describes the data transfers, including completion callback
- * Context: any (IRQs may be blocked, etc)
- *
- * This call may be used in_irq and other contexts which can't sleep,
- * as well as from task contexts which can sleep.
- *
- * The completion callback is invoked in a context which can't sleep.
- * Before that invocation, the value of message->status is undefined.
- * When the callback is issued, message->status holds either zero (to
- * indicate complete success) or a negative error code.  After that
- * callback returns, the driver which issued the transfer request may
- * deallocate the associated memory; it's no longer in use by any SPI
- * core or controller driver code.
- *
- * Note that although all messages to a spi_device are handled in
- * FIFO order, messages may go to different devices in other orders.
- * Some device might be higher priority, or have various "hard" access
- * time requirements, for example.
- *
- * On detection of any fault during the transfer, processing of
- * the entire message is aborted, and the device is deselected.
- * Until returning from the associated message completion callback,
- * no other spi_message queued to that device will be processed.
- * (This rule applies equally to all the synchronous transfer calls,
- * which are wrappers around this core asynchronous primitive.)
- *
- * Return: zero on success, else a negative error code.
- */
-static int spi_async_locked(struct spi_device *spi, struct spi_message *message)
-{
-	struct spi_controller *ctlr = spi->controller;
-	int ret;
-	unsigned long flags;
-
-	ret = __spi_validate(spi, message);
-	if (ret != 0)
-		return ret;
-
-	spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags);
-
-	ret = __spi_async(spi, message);
-
-	spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags);
+	spi_maybe_unoptimize_message(message);
 
 	return ret;
-
 }
+EXPORT_SYMBOL_GPL(spi_async);
 
 static void __spi_transfer_message_noqueue(struct spi_controller *ctlr, struct spi_message *msg)
 {
@@ -4383,6 +4476,7 @@ static void spi_complete(void *arg)
 static int __spi_sync(struct spi_device *spi, struct spi_message *message)
 {
 	DECLARE_COMPLETION_ONSTACK(done);
+	unsigned long flags;
 	int status;
 	struct spi_controller *ctlr = spi->controller;
 
@@ -4391,8 +4485,8 @@ static int __spi_sync(struct spi_device *spi, struct spi_message *message)
 		return -ESHUTDOWN;
 	}
 
-	status = __spi_validate(spi, message);
-	if (status != 0)
+	status = spi_maybe_optimize_message(spi, message);
+	if (status)
 		return status;
 
 	SPI_STATISTICS_INCREMENT_FIELD(ctlr->pcpu_statistics, spi_sync);
@@ -4426,7 +4520,11 @@ static int __spi_sync(struct spi_device *spi, struct spi_message *message)
 	 */
 	message->complete = spi_complete;
 	message->context = &done;
-	status = spi_async_locked(spi, message);
+
+	spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags);
+	status = __spi_async(spi, message);
+	spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags);
+
 	if (status == 0) {
 		wait_for_completion(&done);
 		status = message->status;