Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 189 insertions, 0 deletions

diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
new file mode 100644
index 0000000000..dc1c4ae2d8
--- /dev/null
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#include <linux/bitops.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include "tsens.h"
+
+/* ----- SROT ------ */
+#define SROT_HW_VER_OFF	0x0000
+#define SROT_CTRL_OFF		0x0004
+
+/* ----- TM ------ */
+#define TM_INT_EN_OFF				0x0000
+#define TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF	0x0004
+#define TM_Sn_STATUS_OFF			0x0044
+#define TM_TRDY_OFF				0x0084
+#define TM_HIGH_LOW_INT_STATUS_OFF		0x0088
+#define TM_HIGH_LOW_Sn_INT_THRESHOLD_OFF	0x0090
+
+static struct tsens_legacy_calibration_format tsens_qcs404_nvmem = {
+	.base_len = 8,
+	.base_shift = 2,
+	.sp_len = 6,
+	.mode = { 4, 0 },
+	.invalid = { 4, 2 },
+	.base = { { 4, 3 }, { 4, 11 } },
+	.sp = {
+		{ { 0, 0 }, { 0, 6 } },
+		{ { 0, 12 }, { 0, 18 } },
+		{ { 0, 24 }, { 0, 30 } },
+		{ { 1, 4 },  { 1, 10 } },
+		{ { 1, 16 }, { 1, 22 } },
+		{ { 2, 0 },  { 2, 6 } },
+		{ { 2, 12 }, { 2, 18 } },
+		{ { 2, 24 }, { 2, 30 } },
+		{ { 3, 4 },  { 3, 10 } },
+		{ { 3, 16 }, { 3, 22 } },
+	},
+};
+
+static int calibrate_v1(struct tsens_priv *priv)
+{
+	u32 p1[10], p2[10];
+	u32 *qfprom_cdata;
+	int mode, ret;
+
+	ret = tsens_calibrate_common(priv);
+	if (!ret)
+		return 0;
+
+	qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
+	if (IS_ERR(qfprom_cdata))
+		return PTR_ERR(qfprom_cdata);
+
+	mode = tsens_read_calibration_legacy(priv, &tsens_qcs404_nvmem,
+					     p1, p2,
+					     qfprom_cdata, NULL);
+
+	compute_intercept_slope(priv, p1, p2, mode);
+	kfree(qfprom_cdata);
+
+	return 0;
+}
+
+/* v1.x: msm8956,8976,qcs404,405 */
+
+static struct tsens_features tsens_v1_feat = {
+	.ver_major	= VER_1_X,
+	.crit_int	= 0,
+	.combo_int	= 0,
+	.adc		= 1,
+	.srot_split	= 1,
+	.max_sensors	= 11,
+	.trip_min_temp	= -40000,
+	.trip_max_temp	= 120000,
+};
+
+static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {
+	/* ----- SROT ------ */
+	/* VERSION */
+	[VER_MAJOR] = REG_FIELD(SROT_HW_VER_OFF, 28, 31),
+	[VER_MINOR] = REG_FIELD(SROT_HW_VER_OFF, 16, 27),
+	[VER_STEP]  = REG_FIELD(SROT_HW_VER_OFF,  0, 15),
+	/* CTRL_OFFSET */
+	[TSENS_EN]     = REG_FIELD(SROT_CTRL_OFF, 0,  0),
+	[TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1,  1),
+	[SENSOR_EN]    = REG_FIELD(SROT_CTRL_OFF, 3, 13),
+
+	/* ----- TM ------ */
+	/* INTERRUPT ENABLE */
+	[INT_EN]     = REG_FIELD(TM_INT_EN_OFF, 0, 0),
+
+	/* UPPER/LOWER TEMPERATURE THRESHOLDS */
+	REG_FIELD_FOR_EACH_SENSOR11(LOW_THRESH,    TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF,  0,  9),
+	REG_FIELD_FOR_EACH_SENSOR11(UP_THRESH,     TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 10, 19),
+
+	/* UPPER/LOWER INTERRUPTS [CLEAR/STATUS] */
+	REG_FIELD_FOR_EACH_SENSOR11(LOW_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 20, 20),
+	REG_FIELD_FOR_EACH_SENSOR11(UP_INT_CLEAR,  TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 21, 21),
+	[LOW_INT_STATUS_0] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  0,  0),
+	[LOW_INT_STATUS_1] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  1,  1),
+	[LOW_INT_STATUS_2] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  2,  2),
+	[LOW_INT_STATUS_3] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  3,  3),
+	[LOW_INT_STATUS_4] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  4,  4),
+	[LOW_INT_STATUS_5] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  5,  5),
+	[LOW_INT_STATUS_6] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  6,  6),
+	[LOW_INT_STATUS_7] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  7,  7),
+	[UP_INT_STATUS_0]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  8,  8),
+	[UP_INT_STATUS_1]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF,  9,  9),
+	[UP_INT_STATUS_2]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 10, 10),
+	[UP_INT_STATUS_3]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 11, 11),
+	[UP_INT_STATUS_4]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 12, 12),
+	[UP_INT_STATUS_5]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 13, 13),
+	[UP_INT_STATUS_6]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 14, 14),
+	[UP_INT_STATUS_7]  = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 15, 15),
+
+	/* NO CRITICAL INTERRUPT SUPPORT on v1 */
+
+	/* Sn_STATUS */
+	REG_FIELD_FOR_EACH_SENSOR11(LAST_TEMP,    TM_Sn_STATUS_OFF,  0,  9),
+	REG_FIELD_FOR_EACH_SENSOR11(VALID,        TM_Sn_STATUS_OFF, 14, 14),
+	/* xxx_STATUS bits: 1 == threshold violated */
+	REG_FIELD_FOR_EACH_SENSOR11(MIN_STATUS,   TM_Sn_STATUS_OFF, 10, 10),
+	REG_FIELD_FOR_EACH_SENSOR11(LOWER_STATUS, TM_Sn_STATUS_OFF, 11, 11),
+	REG_FIELD_FOR_EACH_SENSOR11(UPPER_STATUS, TM_Sn_STATUS_OFF, 12, 12),
+	/* No CRITICAL field on v1.x */
+	REG_FIELD_FOR_EACH_SENSOR11(MAX_STATUS,   TM_Sn_STATUS_OFF, 13, 13),
+
+	/* TRDY: 1=ready, 0=in progress */
+	[TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0),
+};
+
+static int __init init_8956(struct tsens_priv *priv) {
+	priv->sensor[0].slope = 3313;
+	priv->sensor[1].slope = 3275;
+	priv->sensor[2].slope = 3320;
+	priv->sensor[3].slope = 3246;
+	priv->sensor[4].slope = 3279;
+	priv->sensor[5].slope = 3257;
+	priv->sensor[6].slope = 3234;
+	priv->sensor[7].slope = 3269;
+	priv->sensor[8].slope = 3255;
+	priv->sensor[9].slope = 3239;
+	priv->sensor[10].slope = 3286;
+
+	return init_common(priv);
+}
+
+static const struct tsens_ops ops_generic_v1 = {
+	.init		= init_common,
+	.calibrate	= calibrate_v1,
+	.get_temp	= get_temp_tsens_valid,
+};
+
+struct tsens_plat_data data_tsens_v1 = {
+	.ops		= &ops_generic_v1,
+	.feat		= &tsens_v1_feat,
+	.fields	= tsens_v1_regfields,
+};
+
+static const struct tsens_ops ops_8956 = {
+	.init		= init_8956,
+	.calibrate	= tsens_calibrate_common,
+	.get_temp	= get_temp_tsens_valid,
+};
+
+struct tsens_plat_data data_8956 = {
+	.num_sensors	= 11,
+	.ops		= &ops_8956,
+	.feat		= &tsens_v1_feat,
+	.fields		= tsens_v1_regfields,
+};
+
+static const struct tsens_ops ops_8976 = {
+	.init		= init_common,
+	.calibrate	= tsens_calibrate_common,
+	.get_temp	= get_temp_tsens_valid,
+};
+
+struct tsens_plat_data data_8976 = {
+	.num_sensors	= 11,
+	.ops		= &ops_8976,
+	.feat		= &tsens_v1_feat,
+	.fields		= tsens_v1_regfields,
+};