diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-06-19 21:00:30 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-06-19 21:00:30 +0000 |
commit | e54def4ad8144ab15f826416e2e0f290ef1901b4 (patch) | |
tree | 583f8d4bd95cd67c44ff37b878a7eddfca9ab97a /drivers/tty/serial/8250 | |
parent | Adding upstream version 6.8.12. (diff) | |
download | linux-e54def4ad8144ab15f826416e2e0f290ef1901b4.tar.xz linux-e54def4ad8144ab15f826416e2e0f290ef1901b4.zip |
Adding upstream version 6.9.2.
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/tty/serial/8250')
-rw-r--r-- | drivers/tty/serial/8250/8250_aspeed_vuart.c | 50 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_bcm2835aux.c | 94 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_bcm7271.c | 174 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_dw.c | 121 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_exar.c | 47 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_ingenic.c | 20 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_lpc18xx.c | 20 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_mtk.c | 8 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_of.c | 99 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_omap.c | 29 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 6 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_pci1xxxx.c | 175 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 20 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_pxa.c | 22 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_tegra.c | 26 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_uniphier.c | 17 | ||||
-rw-r--r-- | drivers/tty/serial/8250/Kconfig | 1 |
17 files changed, 439 insertions, 490 deletions
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c index 8c2aaf7af7..53d8eee9b1 100644 --- a/drivers/tty/serial/8250/8250_aspeed_vuart.c +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c @@ -419,8 +419,8 @@ static int aspeed_vuart_probe(struct platform_device *pdev) struct aspeed_vuart *vuart; struct device_node *np; struct resource *res; - u32 clk, prop, sirq[2]; int rc, sirq_polarity; + u32 prop, sirq[2]; struct clk *vclk; np = pdev->dev.of_node; @@ -447,53 +447,35 @@ static int aspeed_vuart_probe(struct platform_device *pdev) port.port.status = UPSTAT_SYNC_FIFO; port.port.dev = &pdev->dev; port.port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE); + port.port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_FIXED_PORT | UPF_FIXED_TYPE | + UPF_NO_THRE_TEST; port.bugs |= UART_BUG_TXRACE; rc = sysfs_create_group(&vuart->dev->kobj, &aspeed_vuart_attr_group); if (rc < 0) return rc; - if (of_property_read_u32(np, "clock-frequency", &clk)) { + rc = uart_read_port_properties(&port.port); + if (rc) + goto err_sysfs_remove; + + /* Get clk rate through clk driver if present */ + if (!port.port.uartclk) { vclk = devm_clk_get_enabled(dev, NULL); if (IS_ERR(vclk)) { rc = dev_err_probe(dev, PTR_ERR(vclk), "clk or clock-frequency not defined\n"); goto err_sysfs_remove; } - clk = clk_get_rate(vclk); + port.port.uartclk = clk_get_rate(vclk); } /* If current-speed was set, then try not to change it. */ if (of_property_read_u32(np, "current-speed", &prop) == 0) - port.port.custom_divisor = clk / (16 * prop); - - /* Check for shifted address mapping */ - if (of_property_read_u32(np, "reg-offset", &prop) == 0) - port.port.mapbase += prop; - - /* Check for registers offset within the devices address range */ - if (of_property_read_u32(np, "reg-shift", &prop) == 0) - port.port.regshift = prop; + port.port.custom_divisor = port.port.uartclk / (16 * prop); - /* Check for fifo size */ - if (of_property_read_u32(np, "fifo-size", &prop) == 0) - port.port.fifosize = prop; - - /* Check for a fixed line number */ - rc = of_alias_get_id(np, "serial"); - if (rc >= 0) - port.port.line = rc; - - port.port.irq = irq_of_parse_and_map(np, 0); port.port.handle_irq = aspeed_vuart_handle_irq; - port.port.iotype = UPIO_MEM; port.port.type = PORT_ASPEED_VUART; - port.port.uartclk = clk; - port.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP - | UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_NO_THRE_TEST; - - if (of_property_read_bool(np, "no-loopback-test")) - port.port.flags |= UPF_SKIP_TEST; if (port.port.fifosize) port.capabilities = UART_CAP_FIFO; @@ -503,7 +485,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev) rc = serial8250_register_8250_port(&port); if (rc < 0) - goto err_clk_disable; + goto err_sysfs_remove; vuart->line = rc; vuart->port = serial8250_get_port(vuart->line); @@ -529,7 +511,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev) rc = aspeed_vuart_set_lpc_address(vuart, prop); if (rc < 0) { dev_err_probe(dev, rc, "invalid value in aspeed,lpc-io-reg property\n"); - goto err_clk_disable; + goto err_sysfs_remove; } rc = of_property_read_u32_array(np, "aspeed,lpc-interrupts", sirq, 2); @@ -541,14 +523,14 @@ static int aspeed_vuart_probe(struct platform_device *pdev) rc = aspeed_vuart_set_sirq(vuart, sirq[0]); if (rc < 0) { dev_err_probe(dev, rc, "invalid sirq number in aspeed,lpc-interrupts property\n"); - goto err_clk_disable; + goto err_sysfs_remove; } sirq_polarity = aspeed_vuart_map_irq_polarity(sirq[1]); if (sirq_polarity < 0) { rc = dev_err_probe(dev, sirq_polarity, "invalid sirq polarity in aspeed,lpc-interrupts property\n"); - goto err_clk_disable; + goto err_sysfs_remove; } aspeed_vuart_set_sirq_polarity(vuart, sirq_polarity); @@ -559,8 +541,6 @@ static int aspeed_vuart_probe(struct platform_device *pdev) return 0; -err_clk_disable: - irq_dispose_mapping(port.port.irq); err_sysfs_remove: sysfs_remove_group(&vuart->dev->kobj, &aspeed_vuart_attr_group); return rc; diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c index beac6b340a..121a5ce860 100644 --- a/drivers/tty/serial/8250/8250_bcm2835aux.c +++ b/drivers/tty/serial/8250/8250_bcm2835aux.c @@ -45,10 +45,6 @@ struct bcm2835aux_data { u32 cntl; }; -struct bcm2835_aux_serial_driver_data { - resource_size_t offset; -}; - static void bcm2835aux_rs485_start_tx(struct uart_8250_port *up) { if (!(up->port.rs485.flags & SER_RS485_RX_DURING_TX)) { @@ -85,10 +81,9 @@ static void bcm2835aux_rs485_stop_tx(struct uart_8250_port *up) static int bcm2835aux_serial_probe(struct platform_device *pdev) { - const struct bcm2835_aux_serial_driver_data *bcm_data; + const struct software_node *bcm2835_swnode; struct uart_8250_port up = { }; struct bcm2835aux_data *data; - resource_size_t offset = 0; struct resource *res; unsigned int uartclk; int ret; @@ -101,12 +96,8 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) /* initialize data */ up.capabilities = UART_CAP_FIFO | UART_CAP_MINI; up.port.dev = &pdev->dev; - up.port.regshift = 2; up.port.type = PORT_16550; - up.port.iotype = UPIO_MEM; - up.port.fifosize = 8; - up.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE | - UPF_SKIP_TEST | UPF_IOREMAP; + up.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_SKIP_TEST | UPF_IOREMAP; up.port.rs485_config = serial8250_em485_config; up.port.rs485_supported = serial8250_em485_supported; up.rs485_start_tx = bcm2835aux_rs485_start_tx; @@ -122,12 +113,6 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) if (IS_ERR(data->clk)) return dev_err_probe(&pdev->dev, PTR_ERR(data->clk), "could not get clk\n"); - /* get the interrupt */ - ret = platform_get_irq(pdev, 0); - if (ret < 0) - return ret; - up.port.irq = ret; - /* map the main registers */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -135,52 +120,40 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) return -EINVAL; } - bcm_data = device_get_match_data(&pdev->dev); - - /* Some UEFI implementations (e.g. tianocore/edk2 for the Raspberry Pi) - * describe the miniuart with a base address that encompasses the auxiliary - * registers shared between the miniuart and spi. - * - * This is due to historical reasons, see discussion here : - * https://edk2.groups.io/g/devel/topic/87501357#84349 - * - * We need to add the offset between the miniuart and auxiliary - * registers to get the real miniuart base address. - */ - if (bcm_data) - offset = bcm_data->offset; + up.port.mapbase = res->start; + up.port.mapsize = resource_size(res); + + bcm2835_swnode = device_get_match_data(&pdev->dev); + if (bcm2835_swnode) { + ret = device_add_software_node(&pdev->dev, bcm2835_swnode); + if (ret) + return ret; + } - up.port.mapbase = res->start + offset; - up.port.mapsize = resource_size(res) - offset; + ret = uart_read_port_properties(&up.port); + if (ret) + goto rm_swnode; - /* Check for a fixed line number */ - ret = of_alias_get_id(pdev->dev.of_node, "serial"); - if (ret >= 0) - up.port.line = ret; + up.port.regshift = 2; + up.port.fifosize = 8; /* enable the clock as a last step */ ret = clk_prepare_enable(data->clk); if (ret) { - dev_err(&pdev->dev, "unable to enable uart clock - %d\n", - ret); - return ret; + dev_err_probe(&pdev->dev, ret, "unable to enable uart clock\n"); + goto rm_swnode; } uartclk = clk_get_rate(data->clk); - if (!uartclk) { - ret = device_property_read_u32(&pdev->dev, "clock-frequency", &uartclk); - if (ret) { - dev_err_probe(&pdev->dev, ret, "could not get clk rate\n"); - goto dis_clk; - } - } + if (uartclk) + up.port.uartclk = uartclk; /* the HW-clock divider for bcm2835aux is 8, * but 8250 expects a divider of 16, * so we have to multiply the actual clock by 2 * to get identical baudrates. */ - up.port.uartclk = uartclk * 2; + up.port.uartclk *= 2; /* register the port */ ret = serial8250_register_8250_port(&up); @@ -194,6 +167,8 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) dis_clk: clk_disable_unprepare(data->clk); +rm_swnode: + device_remove_software_node(&pdev->dev); return ret; } @@ -203,10 +178,27 @@ static void bcm2835aux_serial_remove(struct platform_device *pdev) serial8250_unregister_port(data->line); clk_disable_unprepare(data->clk); + device_remove_software_node(&pdev->dev); } -static const struct bcm2835_aux_serial_driver_data bcm2835_acpi_data = { - .offset = 0x40, +/* + * Some UEFI implementations (e.g. tianocore/edk2 for the Raspberry Pi) + * describe the miniuart with a base address that encompasses the auxiliary + * registers shared between the miniuart and spi. + * + * This is due to historical reasons, see discussion here: + * https://edk2.groups.io/g/devel/topic/87501357#84349 + * + * We need to add the offset between the miniuart and auxiliary registers + * to get the real miniuart base address. + */ +static const struct property_entry bcm2835_acpi_properties[] = { + PROPERTY_ENTRY_U32("reg-offset", 0x40), + { } +}; + +static const struct software_node bcm2835_acpi_node = { + .properties = bcm2835_acpi_properties, }; static const struct of_device_id bcm2835aux_serial_match[] = { @@ -216,7 +208,7 @@ static const struct of_device_id bcm2835aux_serial_match[] = { MODULE_DEVICE_TABLE(of, bcm2835aux_serial_match); static const struct acpi_device_id bcm2835aux_serial_acpi_match[] = { - { "BCM2836", (kernel_ulong_t)&bcm2835_acpi_data }, + { "BCM2836", (kernel_ulong_t)&bcm2835_acpi_node }, { } }; MODULE_DEVICE_TABLE(acpi, bcm2835aux_serial_acpi_match); diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c index 4f8b70f8ce..5daa38d9c6 100644 --- a/drivers/tty/serial/8250/8250_bcm7271.c +++ b/drivers/tty/serial/8250/8250_bcm7271.c @@ -22,6 +22,7 @@ #include <linux/delay.h> #include <linux/clk.h> #include <linux/debugfs.h> +#include <linux/units.h> #include "8250.h" @@ -187,21 +188,19 @@ #define TX_BUF_SIZE 4096 #define RX_BUF_SIZE 4096 #define RX_BUFS_COUNT 2 -#define KHZ 1000 -#define MHZ(x) ((x) * KHZ * KHZ) static const u32 brcmstb_rate_table[] = { - MHZ(81), - MHZ(108), - MHZ(64), /* Actually 64285715 for some chips */ - MHZ(48), + 81 * HZ_PER_MHZ, + 108 * HZ_PER_MHZ, + 64 * HZ_PER_MHZ, /* Actually 64285715 for some chips */ + 48 * HZ_PER_MHZ, }; static const u32 brcmstb_rate_table_7278[] = { - MHZ(81), - MHZ(108), + 81 * HZ_PER_MHZ, + 108 * HZ_PER_MHZ, 0, - MHZ(48), + 48 * HZ_PER_MHZ, }; struct brcmuart_priv { @@ -676,46 +675,18 @@ static void init_real_clk_rates(struct device *dev, struct brcmuart_priv *priv) clk_set_rate(priv->baud_mux_clk, priv->default_mux_rate); } -static u32 find_quot(struct device *dev, u32 freq, u32 baud, u32 *percent) -{ - u32 quot; - u32 rate; - u64 hires_rate; - u64 hires_baud; - u64 hires_err; - - rate = freq / 16; - quot = DIV_ROUND_CLOSEST(rate, baud); - if (!quot) - return 0; - - /* increase resolution to get xx.xx percent */ - hires_rate = div_u64((u64)rate * 10000, (u64)quot); - hires_baud = (u64)baud * 10000; - - /* get the delta */ - if (hires_rate > hires_baud) - hires_err = (hires_rate - hires_baud); - else - hires_err = (hires_baud - hires_rate); - - *percent = (unsigned long)DIV_ROUND_CLOSEST_ULL(hires_err, baud); - - dev_dbg(dev, "Baud rate: %u, MUX Clk: %u, Error: %u.%u%%\n", - baud, freq, *percent / 100, *percent % 100); - - return quot; -} - static void set_clock_mux(struct uart_port *up, struct brcmuart_priv *priv, u32 baud) { u32 percent; u32 best_percent = UINT_MAX; u32 quot; - u32 freq; u32 best_quot = 1; - u32 best_freq = 0; + u32 rate; + int best_index = -1; + u64 hires_rate; + u64 hires_baud; + u64 hires_err; int rc; int i; int real_baud; @@ -724,35 +695,44 @@ static void set_clock_mux(struct uart_port *up, struct brcmuart_priv *priv, if (priv->baud_mux_clk == NULL) return; - /* Try default_mux_rate first */ - quot = find_quot(up->dev, priv->default_mux_rate, baud, &percent); - if (quot) { - best_percent = percent; - best_freq = priv->default_mux_rate; - best_quot = quot; - } - /* If more than 1% error, find the closest match for specified baud */ - if (best_percent > 100) { - for (i = 0; i < ARRAY_SIZE(priv->real_rates); i++) { - freq = priv->real_rates[i]; - if (freq == 0 || freq == priv->default_mux_rate) - continue; - quot = find_quot(up->dev, freq, baud, &percent); - if (!quot) - continue; - - if (percent < best_percent) { - best_percent = percent; - best_freq = freq; - best_quot = quot; - } + /* Find the closest match for specified baud */ + for (i = 0; i < ARRAY_SIZE(priv->real_rates); i++) { + if (priv->real_rates[i] == 0) + continue; + rate = priv->real_rates[i] / 16; + quot = DIV_ROUND_CLOSEST(rate, baud); + if (!quot) + continue; + + /* increase resolution to get xx.xx percent */ + hires_rate = (u64)rate * 10000; + hires_baud = (u64)baud * 10000; + + hires_err = div_u64(hires_rate, (u64)quot); + + /* get the delta */ + if (hires_err > hires_baud) + hires_err = (hires_err - hires_baud); + else + hires_err = (hires_baud - hires_err); + + percent = (unsigned long)DIV_ROUND_CLOSEST_ULL(hires_err, baud); + dev_dbg(up->dev, + "Baud rate: %u, MUX Clk: %u, Error: %u.%u%%\n", + baud, priv->real_rates[i], percent / 100, + percent % 100); + if (percent < best_percent) { + best_percent = percent; + best_index = i; + best_quot = quot; } } - if (!best_freq) { + if (best_index == -1) { dev_err(up->dev, "Error, %d BAUD rate is too fast.\n", baud); return; } - rc = clk_set_rate(priv->baud_mux_clk, best_freq); + rate = priv->real_rates[best_index]; + rc = clk_set_rate(priv->baud_mux_clk, rate); if (rc) dev_err(up->dev, "Error selecting BAUD MUX clock\n"); @@ -761,8 +741,8 @@ static void set_clock_mux(struct uart_port *up, struct brcmuart_priv *priv, dev_err(up->dev, "Error, baud: %d has %u.%u%% error\n", baud, percent / 100, percent % 100); - real_baud = best_freq / 16 / best_quot; - dev_dbg(up->dev, "Selecting BAUD MUX rate: %u\n", best_freq); + real_baud = rate / 16 / best_quot; + dev_dbg(up->dev, "Selecting BAUD MUX rate: %u\n", rate); dev_dbg(up->dev, "Requested baud: %u, Actual baud: %u\n", baud, real_baud); @@ -771,7 +751,7 @@ static void set_clock_mux(struct uart_port *up, struct brcmuart_priv *priv, i += (i / 2); priv->char_wait = ns_to_ktime(i); - up->uartclk = best_freq; + up->uartclk = rate; } static void brcmstb_set_termios(struct uart_port *up, @@ -955,17 +935,14 @@ static void brcmuart_init_debugfs(struct brcmuart_priv *priv, static int brcmuart_probe(struct platform_device *pdev) { struct resource *regs; - struct device_node *np = pdev->dev.of_node; const struct of_device_id *of_id = NULL; struct uart_8250_port *new_port; struct device *dev = &pdev->dev; struct brcmuart_priv *priv; struct clk *baud_mux_clk; struct uart_8250_port up; - int irq; void __iomem *membase = NULL; resource_size_t mapbase = 0; - u32 clk_rate = 0; int ret; int x; int dma_irq; @@ -973,15 +950,12 @@ static int brcmuart_probe(struct platform_device *pdev) "uart", "dma_rx", "dma_tx", "dma_intr2", "dma_arb" }; - irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; priv = devm_kzalloc(dev, sizeof(struct brcmuart_priv), GFP_KERNEL); if (!priv) return -ENOMEM; - of_id = of_match_node(brcmuart_dt_ids, np); + of_id = of_match_node(brcmuart_dt_ids, dev->of_node); if (!of_id || !of_id->data) priv->rate_table = brcmstb_rate_table; else @@ -1031,7 +1005,23 @@ static int brcmuart_probe(struct platform_device *pdev) } } - of_property_read_u32(np, "clock-frequency", &clk_rate); + dev_dbg(dev, "DMA is %senabled\n", priv->dma_enabled ? "" : "not "); + + memset(&up, 0, sizeof(up)); + up.port.type = PORT_BCM7271; + up.port.dev = dev; + up.port.mapbase = mapbase; + up.port.membase = membase; + up.port.handle_irq = brcmuart_handle_irq; + up.port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_FIXED_TYPE; + up.port.private_data = priv; + + ret = uart_read_port_properties(&up.port); + if (ret) + goto release_dma; + + up.port.regshift = 2; + up.port.iotype = device_is_big_endian(dev) ? UPIO_MEM32BE : UPIO_MEM32; /* See if a Baud clock has been specified */ baud_mux_clk = devm_clk_get_optional_enabled(dev, "sw_baud"); @@ -1043,39 +1033,11 @@ static int brcmuart_probe(struct platform_device *pdev) priv->baud_mux_clk = baud_mux_clk; init_real_clk_rates(dev, priv); - clk_rate = priv->default_mux_rate; + up.port.uartclk = priv->default_mux_rate; } else { dev_dbg(dev, "BAUD MUX clock not specified\n"); } - if (clk_rate == 0) { - ret = dev_err_probe(dev, -EINVAL, "clock-frequency or clk not defined\n"); - goto release_dma; - } - - dev_dbg(dev, "DMA is %senabled\n", priv->dma_enabled ? "" : "not "); - - memset(&up, 0, sizeof(up)); - up.port.type = PORT_BCM7271; - up.port.uartclk = clk_rate; - up.port.dev = dev; - up.port.mapbase = mapbase; - up.port.membase = membase; - up.port.irq = irq; - up.port.handle_irq = brcmuart_handle_irq; - up.port.regshift = 2; - up.port.iotype = of_device_is_big_endian(np) ? - UPIO_MEM32BE : UPIO_MEM32; - up.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF - | UPF_FIXED_PORT | UPF_FIXED_TYPE; - up.port.dev = dev; - up.port.private_data = priv; - - /* Check for a fixed line number */ - ret = of_alias_get_id(np, "serial"); - if (ret >= 0) - up.port.line = ret; - /* setup HR timer */ hrtimer_init(&priv->hrt, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); priv->hrt.function = brcmuart_hrtimer_func; diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 2d1f350a4b..1300c92b87 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -9,7 +9,6 @@ * LCR is written whilst busy. If it is, then a busy detect interrupt is * raised, the LCR needs to be rewritten and the uart status register read. */ -#include <linux/acpi.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/device.h> @@ -17,7 +16,6 @@ #include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/notifier.h> -#include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/property.h> @@ -56,6 +54,7 @@ #define DW_UART_QUIRK_ARMADA_38X BIT(1) #define DW_UART_QUIRK_SKIP_SET_RATE BIT(2) #define DW_UART_QUIRK_IS_DMA_FC BIT(3) +#define DW_UART_QUIRK_APMC0D08 BIT(4) static inline struct dw8250_data *clk_to_dw8250_data(struct notifier_block *nb) { @@ -445,44 +444,29 @@ static void dw8250_prepare_rx_dma(struct uart_8250_port *p) static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data) { - struct device_node *np = p->dev->of_node; + unsigned int quirks = data->pdata ? data->pdata->quirks : 0; - if (np) { - unsigned int quirks = data->pdata->quirks; - int id; - - /* get index of serial line, if found in DT aliases */ - id = of_alias_get_id(np, "serial"); - if (id >= 0) - p->line = id; #ifdef CONFIG_64BIT - if (quirks & DW_UART_QUIRK_OCTEON) { - p->serial_in = dw8250_serial_inq; - p->serial_out = dw8250_serial_outq; - p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE; - p->type = PORT_OCTEON; - data->skip_autocfg = true; - } + if (quirks & DW_UART_QUIRK_OCTEON) { + p->serial_in = dw8250_serial_inq; + p->serial_out = dw8250_serial_outq; + p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE; + p->type = PORT_OCTEON; + data->skip_autocfg = true; + } #endif - if (of_device_is_big_endian(np)) { - p->iotype = UPIO_MEM32BE; - p->serial_in = dw8250_serial_in32be; - p->serial_out = dw8250_serial_out32be; - } - - if (quirks & DW_UART_QUIRK_ARMADA_38X) - p->serial_out = dw8250_serial_out38x; - if (quirks & DW_UART_QUIRK_SKIP_SET_RATE) - p->set_termios = dw8250_do_set_termios; - if (quirks & DW_UART_QUIRK_IS_DMA_FC) { - data->data.dma.txconf.device_fc = 1; - data->data.dma.rxconf.device_fc = 1; - data->data.dma.prepare_tx_dma = dw8250_prepare_tx_dma; - data->data.dma.prepare_rx_dma = dw8250_prepare_rx_dma; - } - - } else if (acpi_dev_present("APMC0D08", NULL, -1)) { + if (quirks & DW_UART_QUIRK_ARMADA_38X) + p->serial_out = dw8250_serial_out38x; + if (quirks & DW_UART_QUIRK_SKIP_SET_RATE) + p->set_termios = dw8250_do_set_termios; + if (quirks & DW_UART_QUIRK_IS_DMA_FC) { + data->data.dma.txconf.device_fc = 1; + data->data.dma.rxconf.device_fc = 1; + data->data.dma.prepare_tx_dma = dw8250_prepare_tx_dma; + data->data.dma.prepare_rx_dma = dw8250_prepare_rx_dma; + } + if (quirks & DW_UART_QUIRK_APMC0D08) { p->iotype = UPIO_MEM32; p->regshift = 2; p->serial_in = dw8250_serial_in32; @@ -510,39 +494,21 @@ static int dw8250_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct dw8250_data *data; struct resource *regs; - int irq; int err; - u32 val; regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!regs) return dev_err_probe(dev, -EINVAL, "no registers defined\n"); - irq = platform_get_irq_optional(pdev, 0); - /* no interrupt -> fall back to polling */ - if (irq == -ENXIO) - irq = 0; - if (irq < 0) - return irq; - spin_lock_init(&p->lock); - p->mapbase = regs->start; - p->irq = irq; p->handle_irq = dw8250_handle_irq; p->pm = dw8250_do_pm; p->type = PORT_8250; - p->flags = UPF_SHARE_IRQ | UPF_FIXED_PORT; + p->flags = UPF_FIXED_PORT; p->dev = dev; - p->iotype = UPIO_MEM; - p->serial_in = dw8250_serial_in; - p->serial_out = dw8250_serial_out; p->set_ldisc = dw8250_set_ldisc; p->set_termios = dw8250_set_termios; - p->membase = devm_ioremap(dev, regs->start, resource_size(regs)); - if (!p->membase) - return -ENOMEM; - data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; @@ -554,15 +520,35 @@ static int dw8250_probe(struct platform_device *pdev) data->uart_16550_compatible = device_property_read_bool(dev, "snps,uart-16550-compatible"); - err = device_property_read_u32(dev, "reg-shift", &val); - if (!err) - p->regshift = val; + p->mapbase = regs->start; + p->mapsize = resource_size(regs); - err = device_property_read_u32(dev, "reg-io-width", &val); - if (!err && val == 4) { - p->iotype = UPIO_MEM32; + p->membase = devm_ioremap(dev, p->mapbase, p->mapsize); + if (!p->membase) + return -ENOMEM; + + err = uart_read_port_properties(p); + /* no interrupt -> fall back to polling */ + if (err == -ENXIO) + err = 0; + if (err) + return err; + + switch (p->iotype) { + case UPIO_MEM: + p->serial_in = dw8250_serial_in; + p->serial_out = dw8250_serial_out; + break; + case UPIO_MEM32: p->serial_in = dw8250_serial_in32; p->serial_out = dw8250_serial_out32; + break; + case UPIO_MEM32BE: + p->serial_in = dw8250_serial_in32be; + p->serial_out = dw8250_serial_out32be; + break; + default: + return -ENODEV; } if (device_property_read_bool(dev, "dcd-override")) { @@ -589,15 +575,13 @@ static int dw8250_probe(struct platform_device *pdev) data->msr_mask_off |= UART_MSR_TERI; } - /* Always ask for fixed clock rate from a property. */ - device_property_read_u32(dev, "clock-frequency", &p->uartclk); - /* If there is separate baudclk, get the rate from it. */ data->clk = devm_clk_get_optional_enabled(dev, "baudclk"); if (data->clk == NULL) data->clk = devm_clk_get_optional_enabled(dev, NULL); if (IS_ERR(data->clk)) - return PTR_ERR(data->clk); + return dev_err_probe(dev, PTR_ERR(data->clk), + "failed to get baudclk\n"); INIT_WORK(&data->clk_work, dw8250_clk_work_cb); data->clk_notifier.notifier_call = dw8250_clk_notifier_cb; @@ -762,13 +746,18 @@ static const struct of_device_id dw8250_of_match[] = { }; MODULE_DEVICE_TABLE(of, dw8250_of_match); +static const struct dw8250_platform_data dw8250_apmc0d08 = { + .usr_reg = DW_UART_USR, + .quirks = DW_UART_QUIRK_APMC0D08, +}; + static const struct acpi_device_id dw8250_acpi_match[] = { { "80860F0A", (kernel_ulong_t)&dw8250_dw_apb }, { "8086228A", (kernel_ulong_t)&dw8250_dw_apb }, { "AMD0020", (kernel_ulong_t)&dw8250_dw_apb }, { "AMDI0020", (kernel_ulong_t)&dw8250_dw_apb }, { "AMDI0022", (kernel_ulong_t)&dw8250_dw_apb }, - { "APMC0D08", (kernel_ulong_t)&dw8250_dw_apb}, + { "APMC0D08", (kernel_ulong_t)&dw8250_apmc0d08 }, { "BRCM2032", (kernel_ulong_t)&dw8250_dw_apb }, { "HISI0031", (kernel_ulong_t)&dw8250_dw_apb }, { "INT33C4", (kernel_ulong_t)&dw8250_dw_apb }, diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index dab94835b6..0440df7de1 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -6,23 +6,29 @@ * * Copyright (C) 2017 Sudip Mukherjee, All Rights Reserved. */ -#include <linux/acpi.h> +#include <linux/bits.h> +#include <linux/delay.h> +#include <linux/device.h> #include <linux/dmi.h> +#include <linux/interrupt.h> #include <linux/io.h> -#include <linux/kernel.h> +#include <linux/math.h> #include <linux/module.h> #include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/pm.h> #include <linux/property.h> +#include <linux/string.h> +#include <linux/types.h> + +#include <linux/serial_8250.h> #include <linux/serial_core.h> #include <linux/serial_reg.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/tty.h> -#include <linux/delay.h> #include <asm/byteorder.h> #include "8250.h" +#include "8250_pcilib.h" #define PCI_DEVICE_ID_ACCESSIO_COM_2S 0x1052 #define PCI_DEVICE_ID_ACCESSIO_COM_4S 0x105d @@ -229,13 +235,12 @@ static int default_setup(struct exar8250 *priv, struct pci_dev *pcidev, struct uart_8250_port *port) { const struct exar8250_board *board = priv->board; - unsigned int bar = 0; unsigned char status; + int err; - port->port.iotype = UPIO_MEM; - port->port.mapbase = pci_resource_start(pcidev, bar) + offset; - port->port.membase = priv->virt + offset; - port->port.regshift = board->reg_shift; + err = serial8250_pci_setup_port(pcidev, port, 0, offset, board->reg_shift); + if (err) + return err; /* * XR17V35x UARTs have an extra divisor register, DLD that gets enabled @@ -375,7 +380,7 @@ static struct platform_device *__xr17v35x_register_gpio(struct pci_dev *pcidev, return NULL; pdev->dev.parent = &pcidev->dev; - ACPI_COMPANION_SET(&pdev->dev, ACPI_COMPANION(&pcidev->dev)); + device_set_node(&pdev->dev, dev_fwnode(&pcidev->dev)); if (device_add_software_node(&pdev->dev, node) < 0 || platform_device_add(pdev) < 0) { @@ -713,14 +718,14 @@ exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent) uart.port.irq = pci_irq_vector(pcidev, 0); uart.port.dev = &pcidev->dev; + /* Clear interrupts */ + exar_misc_clear(priv); + rc = devm_request_irq(&pcidev->dev, uart.port.irq, exar_misc_handler, IRQF_SHARED, "exar_uart", priv); if (rc) return rc; - /* Clear interrupts */ - exar_misc_clear(priv); - for (i = 0; i < nr_ports && i < maxnr; i++) { rc = board->setup(priv, pcidev, &uart, i); if (rc) { @@ -758,10 +763,9 @@ static void exar_pci_remove(struct pci_dev *pcidev) priv->board->exit(pcidev); } -static int __maybe_unused exar_suspend(struct device *dev) +static int exar_suspend(struct device *dev) { - struct pci_dev *pcidev = to_pci_dev(dev); - struct exar8250 *priv = pci_get_drvdata(pcidev); + struct exar8250 *priv = dev_get_drvdata(dev); unsigned int i; for (i = 0; i < priv->nr; i++) @@ -771,7 +775,7 @@ static int __maybe_unused exar_suspend(struct device *dev) return 0; } -static int __maybe_unused exar_resume(struct device *dev) +static int exar_resume(struct device *dev) { struct exar8250 *priv = dev_get_drvdata(dev); unsigned int i; @@ -785,7 +789,7 @@ static int __maybe_unused exar_resume(struct device *dev) return 0; } -static SIMPLE_DEV_PM_OPS(exar_pci_pm, exar_suspend, exar_resume); +static DEFINE_SIMPLE_DEV_PM_OPS(exar_pci_pm, exar_suspend, exar_resume); static const struct exar8250_board pbn_fastcom335_2 = { .num_ports = 2, @@ -935,12 +939,13 @@ static struct pci_driver exar_pci_driver = { .probe = exar_pci_probe, .remove = exar_pci_remove, .driver = { - .pm = &exar_pci_pm, + .pm = pm_sleep_ptr(&exar_pci_pm), }, .id_table = exar_pci_tbl, }; module_pci_driver(exar_pci_driver); +MODULE_IMPORT_NS(SERIAL_8250_PCI); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Exar Serial Driver"); MODULE_AUTHOR("Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>"); diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c index a12f737924..a2783e38a2 100644 --- a/drivers/tty/serial/8250/8250_ingenic.c +++ b/drivers/tty/serial/8250/8250_ingenic.c @@ -234,7 +234,7 @@ static int ingenic_uart_probe(struct platform_device *pdev) struct ingenic_uart_data *data; const struct ingenic_uart_config *cdata; struct resource *regs; - int irq, err, line; + int err; cdata = of_device_get_match_data(&pdev->dev); if (!cdata) { @@ -242,10 +242,6 @@ static int ingenic_uart_probe(struct platform_device *pdev) return -ENODEV; } - irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; - regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!regs) { dev_err(&pdev->dev, "no registers defined\n"); @@ -259,21 +255,19 @@ static int ingenic_uart_probe(struct platform_device *pdev) spin_lock_init(&uart.port.lock); uart.port.type = PORT_16550A; uart.port.flags = UPF_SKIP_TEST | UPF_IOREMAP | UPF_FIXED_TYPE; - uart.port.iotype = UPIO_MEM; uart.port.mapbase = regs->start; - uart.port.regshift = 2; uart.port.serial_out = ingenic_uart_serial_out; uart.port.serial_in = ingenic_uart_serial_in; - uart.port.irq = irq; uart.port.dev = &pdev->dev; - uart.port.fifosize = cdata->fifosize; uart.tx_loadsz = cdata->tx_loadsz; uart.capabilities = UART_CAP_FIFO | UART_CAP_RTOIE; - /* Check for a fixed line number */ - line = of_alias_get_id(pdev->dev.of_node, "serial"); - if (line >= 0) - uart.port.line = line; + err = uart_read_port_properties(&uart.port); + if (err) + return err; + + uart.port.regshift = 2; + uart.port.fifosize = cdata->fifosize; uart.port.membase = devm_ioremap(&pdev->dev, regs->start, resource_size(regs)); diff --git a/drivers/tty/serial/8250/8250_lpc18xx.c b/drivers/tty/serial/8250/8250_lpc18xx.c index 8d728a6a59..47e1a056a6 100644 --- a/drivers/tty/serial/8250/8250_lpc18xx.c +++ b/drivers/tty/serial/8250/8250_lpc18xx.c @@ -92,11 +92,7 @@ static int lpc18xx_serial_probe(struct platform_device *pdev) struct lpc18xx_uart_data *data; struct uart_8250_port uart; struct resource *res; - int irq, ret; - - irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; + int ret; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -139,19 +135,12 @@ static int lpc18xx_serial_probe(struct platform_device *pdev) goto dis_clk_reg; } - ret = of_alias_get_id(pdev->dev.of_node, "serial"); - if (ret >= 0) - uart.port.line = ret; - data->dma.rx_param = data; data->dma.tx_param = data; spin_lock_init(&uart.port.lock); uart.port.dev = &pdev->dev; - uart.port.irq = irq; - uart.port.iotype = UPIO_MEM32; uart.port.mapbase = res->start; - uart.port.regshift = 2; uart.port.type = PORT_16550A; uart.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_SKIP_TEST; uart.port.uartclk = clk_get_rate(data->clk_uart); @@ -160,6 +149,13 @@ static int lpc18xx_serial_probe(struct platform_device *pdev) uart.port.rs485_supported = lpc18xx_rs485_supported; uart.port.serial_out = lpc18xx_uart_serial_out; + ret = uart_read_port_properties(&uart.port); + if (ret) + goto dis_uart_clk; + + uart.port.iotype = UPIO_MEM32; + uart.port.regshift = 2; + uart.dma = &data->dma; uart.dma->rxconf.src_maxburst = 1; uart.dma->txconf.dst_maxburst = 1; diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index d14988d149..9ff6bbe9c0 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -209,19 +209,15 @@ static int mtk8250_startup(struct uart_port *port) static void mtk8250_shutdown(struct uart_port *port) { +#ifdef CONFIG_SERIAL_8250_DMA struct uart_8250_port *up = up_to_u8250p(port); struct mtk8250_data *data = port->private_data; - int irq = data->rx_wakeup_irq; -#ifdef CONFIG_SERIAL_8250_DMA if (up->dma) data->rx_status = DMA_RX_SHUTDOWN; #endif - serial8250_do_shutdown(port); - - if (irq >= 0) - serial8250_do_set_mctrl(&up->port, TIOCM_RTS); + return serial8250_do_shutdown(port); } static void mtk8250_disable_intrs(struct uart_8250_port *up, int mask) diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index 9dcc17e332..5d1dd992d8 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -69,37 +69,22 @@ static int of_platform_serial_setup(struct platform_device *ofdev, struct device *dev = &ofdev->dev; struct device_node *np = dev->of_node; struct uart_port *port = &up->port; - u32 clk, spd, prop; - int ret, irq; + u32 spd; + int ret; memset(port, 0, sizeof *port); pm_runtime_enable(&ofdev->dev); pm_runtime_get_sync(&ofdev->dev); - if (of_property_read_u32(np, "clock-frequency", &clk)) { - - /* Get clk rate through clk driver if present */ - info->clk = devm_clk_get_enabled(dev, NULL); - if (IS_ERR(info->clk)) { - ret = dev_err_probe(dev, PTR_ERR(info->clk), "failed to get clock\n"); - goto err_pmruntime; - } - - clk = clk_get_rate(info->clk); - } - /* If current-speed was set, then try not to change it. */ - if (of_property_read_u32(np, "current-speed", &spd) == 0) - port->custom_divisor = clk / (16 * spd); - ret = of_address_to_resource(np, 0, &resource); if (ret) { dev_err_probe(dev, ret, "invalid address\n"); goto err_pmruntime; } - port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | - UPF_FIXED_TYPE; + port->dev = &ofdev->dev; + port->flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_FIXED_TYPE; spin_lock_init(&port->lock); if (resource_type(&resource) == IORESOURCE_IO) { @@ -108,70 +93,31 @@ static int of_platform_serial_setup(struct platform_device *ofdev, } else { port->mapbase = resource.start; port->mapsize = resource_size(&resource); + port->flags |= UPF_IOREMAP; + } - /* Check for shifted address mapping */ - if (of_property_read_u32(np, "reg-offset", &prop) == 0) { - if (prop >= port->mapsize) { - ret = dev_err_probe(dev, -EINVAL, "reg-offset %u exceeds region size %pa\n", - prop, &port->mapsize); - goto err_pmruntime; - } + ret = uart_read_and_validate_port_properties(port); + if (ret) + goto err_pmruntime; - port->mapbase += prop; - port->mapsize -= prop; + /* Get clk rate through clk driver if present */ + if (!port->uartclk) { + info->clk = devm_clk_get_enabled(dev, NULL); + if (IS_ERR(info->clk)) { + ret = dev_err_probe(dev, PTR_ERR(info->clk), "failed to get clock\n"); + goto err_pmruntime; } - port->iotype = UPIO_MEM; - if (of_property_read_u32(np, "reg-io-width", &prop) == 0) { - switch (prop) { - case 1: - port->iotype = UPIO_MEM; - break; - case 2: - port->iotype = UPIO_MEM16; - break; - case 4: - port->iotype = of_device_is_big_endian(np) ? - UPIO_MEM32BE : UPIO_MEM32; - break; - default: - ret = dev_err_probe(dev, -EINVAL, "unsupported reg-io-width (%u)\n", - prop); - goto err_pmruntime; - } - } - port->flags |= UPF_IOREMAP; + port->uartclk = clk_get_rate(info->clk); } + /* If current-speed was set, then try not to change it. */ + if (of_property_read_u32(np, "current-speed", &spd) == 0) + port->custom_divisor = port->uartclk / (16 * spd); /* Compatibility with the deprecated pxa driver and 8250_pxa drivers. */ if (of_device_is_compatible(np, "mrvl,mmp-uart")) port->regshift = 2; - /* Check for registers offset within the devices address range */ - if (of_property_read_u32(np, "reg-shift", &prop) == 0) - port->regshift = prop; - - /* Check for fifo size */ - if (of_property_read_u32(np, "fifo-size", &prop) == 0) - port->fifosize = prop; - - /* Check for a fixed line number */ - ret = of_alias_get_id(np, "serial"); - if (ret >= 0) - port->line = ret; - - irq = of_irq_get(np, 0); - if (irq < 0) { - if (irq == -EPROBE_DEFER) { - ret = -EPROBE_DEFER; - goto err_pmruntime; - } - /* IRQ support not mandatory */ - irq = 0; - } - - port->irq = irq; - info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL); if (IS_ERR(info->rst)) { ret = PTR_ERR(info->rst); @@ -183,12 +129,6 @@ static int of_platform_serial_setup(struct platform_device *ofdev, goto err_pmruntime; port->type = type; - port->uartclk = clk; - - if (of_property_read_bool(np, "no-loopback-test")) - port->flags |= UPF_SKIP_TEST; - - port->dev = &ofdev->dev; port->rs485_config = serial8250_em485_config; port->rs485_supported = serial8250_em485_supported; up->rs485_start_tx = serial8250_em485_start_tx; @@ -280,7 +220,6 @@ static int of_platform_serial_probe(struct platform_device *ofdev) platform_set_drvdata(ofdev, info); return 0; err_dispose: - irq_dispose_mapping(port8250.port.irq); pm_runtime_put_sync(&ofdev->dev); pm_runtime_disable(&ofdev->dev); err_free: diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 6942990a33..66901d9308 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -1394,11 +1394,7 @@ static int omap8250_probe(struct platform_device *pdev) struct uart_8250_port up; struct resource *regs; void __iomem *membase; - int irq, ret; - - irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; + int ret; regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!regs) { @@ -1419,7 +1415,6 @@ static int omap8250_probe(struct platform_device *pdev) up.port.dev = &pdev->dev; up.port.mapbase = regs->start; up.port.membase = membase; - up.port.irq = irq; /* * It claims to be 16C750 compatible however it is a little different. * It has EFR and has no FCR7_64byte bit. The AFE (which it claims to @@ -1429,13 +1424,9 @@ static int omap8250_probe(struct platform_device *pdev) * or pm callback. */ up.port.type = PORT_8250; - up.port.iotype = UPIO_MEM; - up.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_SOFT_FLOW | - UPF_HARD_FLOW; + up.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_SOFT_FLOW | UPF_HARD_FLOW; up.port.private_data = priv; - up.port.regshift = OMAP_UART_REGSHIFT; - up.port.fifosize = 64; up.tx_loadsz = 64; up.capabilities = UART_CAP_FIFO; #ifdef CONFIG_PM @@ -1461,14 +1452,14 @@ static int omap8250_probe(struct platform_device *pdev) up.rs485_stop_tx = serial8250_em485_stop_tx; up.port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE); - ret = of_alias_get_id(np, "serial"); - if (ret < 0) { - dev_err(&pdev->dev, "failed to get alias\n"); + ret = uart_read_port_properties(&up.port); + if (ret) return ret; - } - up.port.line = ret; - if (of_property_read_u32(np, "clock-frequency", &up.port.uartclk)) { + up.port.regshift = OMAP_UART_REGSHIFT; + up.port.fifosize = 64; + + if (!up.port.uartclk) { struct clk *clk; clk = devm_clk_get(&pdev->dev, NULL); @@ -1560,8 +1551,8 @@ static int omap8250_probe(struct platform_device *pdev) } #endif - irq_set_status_flags(irq, IRQ_NOAUTOEN); - ret = devm_request_irq(&pdev->dev, irq, omap8250_irq, 0, + irq_set_status_flags(up.port.irq, IRQ_NOAUTOEN); + ret = devm_request_irq(&pdev->dev, up.port.irq, omap8250_irq, 0, dev_name(&pdev->dev), priv); if (ret < 0) return ret; diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 0d35c77fad..e2e4f99f9d 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -5010,12 +5010,6 @@ static const struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_2_115200 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_115200 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_115200 }, { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_4_460800 }, diff --git a/drivers/tty/serial/8250/8250_pci1xxxx.c b/drivers/tty/serial/8250/8250_pci1xxxx.c index 2dda737b16..2fbb5851f7 100644 --- a/drivers/tty/serial/8250/8250_pci1xxxx.c +++ b/drivers/tty/serial/8250/8250_pci1xxxx.c @@ -7,23 +7,31 @@ * Copyright (C) 2022 Microchip Technology Inc., All Rights Reserved. */ +#include <linux/array_size.h> #include <linux/bitfield.h> -#include <linux/bitops.h> -#include <linux/delay.h> +#include <linux/bits.h> +#include <linux/circ_buf.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/gfp_types.h> #include <linux/io.h> #include <linux/iopoll.h> -#include <linux/kernel.h> +#include <linux/minmax.h> #include <linux/module.h> +#include <linux/mutex.h> +#include <linux/overflow.h> #include <linux/pci.h> +#include <linux/pm.h> #include <linux/serial_core.h> #include <linux/serial_reg.h> #include <linux/serial_8250.h> -#include <linux/slab.h> +#include <linux/spinlock.h> #include <linux/string.h> -#include <linux/units.h> +#include <linux/time.h> #include <linux/tty.h> #include <linux/tty_flip.h> -#include <linux/8250_pci.h> +#include <linux/types.h> +#include <linux/units.h> #include <asm/byteorder.h> @@ -67,6 +75,7 @@ #define SYSLOCK_RETRY_CNT 1000 #define UART_RX_BYTE_FIFO 0x00 +#define UART_TX_BYTE_FIFO 0x00 #define UART_FIFO_CTL 0x02 #define UART_ACTV_REG 0x11 @@ -81,10 +90,10 @@ #define ADCL_CFG_PIN_SEL BIT(1) #define ADCL_CFG_EN BIT(0) -#define UART_BIT_SAMPLE_CNT 16 +#define UART_BIT_SAMPLE_CNT_8 8 +#define UART_BIT_SAMPLE_CNT_16 16 #define BAUD_CLOCK_DIV_INT_MSK GENMASK(31, 8) #define ADCL_CFG_RTS_DELAY_MASK GENMASK(11, 8) -#define UART_CLOCK_DEFAULT (62500 * HZ_PER_KHZ) #define UART_WAKE_REG 0x8C #define UART_WAKE_MASK_REG 0x90 @@ -95,13 +104,19 @@ (UART_WAKE_N_PIN | UART_WAKE_NCTS | UART_WAKE_INT) #define UART_BAUD_CLK_DIVISOR_REG 0x54 +#define FRAC_DIV_CFG_REG 0x58 #define UART_RESET_REG 0x94 #define UART_RESET_D3_RESET_DISABLE BIT(16) #define UART_BURST_STATUS_REG 0x9C +#define UART_TX_BURST_FIFO 0xA0 #define UART_RX_BURST_FIFO 0xA4 +#define UART_BIT_DIVISOR_8 0x26731000 +#define UART_BIT_DIVISOR_16 0x6ef71000 +#define UART_BAUD_4MBPS 4000000 + #define MAX_PORTS 4 #define PORT_OFFSET 0x100 #define RX_BUF_SIZE 512 @@ -109,6 +124,7 @@ #define UART_BURST_SIZE 4 #define UART_BST_STAT_RX_COUNT_MASK 0x00FF +#define UART_BST_STAT_TX_COUNT_MASK 0xFF00 #define UART_BST_STAT_IIR_INT_PEND 0x100000 #define UART_LSR_OVERRUN_ERR_CLR 0x43 #define UART_BST_STAT_LSR_RX_MASK 0x9F000000 @@ -116,6 +132,7 @@ #define UART_BST_STAT_LSR_OVERRUN_ERR 0x2000000 #define UART_BST_STAT_LSR_PARITY_ERR 0x4000000 #define UART_BST_STAT_LSR_FRAME_ERR 0x8000000 +#define UART_BST_STAT_LSR_THRE 0x20000000 struct pci1xxxx_8250 { unsigned int nr; @@ -206,15 +223,21 @@ static int pci1xxxx_get_num_ports(struct pci_dev *dev) static unsigned int pci1xxxx_get_divisor(struct uart_port *port, unsigned int baud, unsigned int *frac) { + unsigned int uart_sample_cnt; unsigned int quot; + if (baud >= UART_BAUD_4MBPS) + uart_sample_cnt = UART_BIT_SAMPLE_CNT_8; + else + uart_sample_cnt = UART_BIT_SAMPLE_CNT_16; + /* * Calculate baud rate sampling period in nanoseconds. * Fractional part x denotes x/255 parts of a nanosecond. */ - quot = NSEC_PER_SEC / (baud * UART_BIT_SAMPLE_CNT); - *frac = (NSEC_PER_SEC - quot * baud * UART_BIT_SAMPLE_CNT) * - 255 / UART_BIT_SAMPLE_CNT / baud; + quot = NSEC_PER_SEC / (baud * uart_sample_cnt); + *frac = (NSEC_PER_SEC - quot * baud * uart_sample_cnt) * + 255 / uart_sample_cnt / baud; return quot; } @@ -222,6 +245,11 @@ static unsigned int pci1xxxx_get_divisor(struct uart_port *port, static void pci1xxxx_set_divisor(struct uart_port *port, unsigned int baud, unsigned int quot, unsigned int frac) { + if (baud >= UART_BAUD_4MBPS) + writel(UART_BIT_DIVISOR_8, port->membase + FRAC_DIV_CFG_REG); + else + writel(UART_BIT_DIVISOR_16, port->membase + FRAC_DIV_CFG_REG); + writel(FIELD_PREP(BAUD_CLOCK_DIV_INT_MSK, quot) | frac, port->membase + UART_BAUD_CLK_DIVISOR_REG); } @@ -233,7 +261,16 @@ static int pci1xxxx_rs485_config(struct uart_port *port, u32 delay_in_baud_periods; u32 baud_period_in_ns; u32 mode_cfg = 0; + u32 sample_cnt; u32 clock_div; + u32 frac_div; + + frac_div = readl(port->membase + FRAC_DIV_CFG_REG); + + if (frac_div == UART_BIT_DIVISOR_16) + sample_cnt = UART_BIT_SAMPLE_CNT_16; + else + sample_cnt = UART_BIT_SAMPLE_CNT_8; /* * pci1xxxx's uart hardware supports only RTS delay after @@ -249,7 +286,7 @@ static int pci1xxxx_rs485_config(struct uart_port *port, clock_div = readl(port->membase + UART_BAUD_CLK_DIVISOR_REG); baud_period_in_ns = FIELD_GET(BAUD_CLOCK_DIV_INT_MSK, clock_div) * - UART_BIT_SAMPLE_CNT; + sample_cnt; delay_in_baud_periods = rs485->delay_rts_after_send * NSEC_PER_MSEC / baud_period_in_ns; @@ -344,6 +381,105 @@ static void pci1xxxx_rx_burst(struct uart_port *port, u32 uart_status) } } +static void pci1xxxx_process_write_data(struct uart_port *port, + struct circ_buf *xmit, + int *data_empty_count, + u32 *valid_byte_count) +{ + u32 valid_burst_count = *valid_byte_count / UART_BURST_SIZE; + + /* + * Each transaction transfers data in DWORDs. If there are less than + * four remaining valid_byte_count to transfer or if the circular + * buffer has insufficient space for a DWORD, the data is transferred + * one byte at a time. + */ + while (valid_burst_count) { + if (*data_empty_count - UART_BURST_SIZE < 0) + break; + if (xmit->tail > (UART_XMIT_SIZE - UART_BURST_SIZE)) + break; + writel(*(unsigned int *)&xmit->buf[xmit->tail], + port->membase + UART_TX_BURST_FIFO); + *valid_byte_count -= UART_BURST_SIZE; + *data_empty_count -= UART_BURST_SIZE; + valid_burst_count -= UART_BYTE_SIZE; + + xmit->tail = (xmit->tail + UART_BURST_SIZE) & + (UART_XMIT_SIZE - 1); + } + + while (*valid_byte_count) { + if (*data_empty_count - UART_BYTE_SIZE < 0) + break; + writeb(xmit->buf[xmit->tail], port->membase + + UART_TX_BYTE_FIFO); + *data_empty_count -= UART_BYTE_SIZE; + *valid_byte_count -= UART_BYTE_SIZE; + + /* + * When the tail of the circular buffer is reached, the next + * byte is transferred to the beginning of the buffer. + */ + xmit->tail = (xmit->tail + UART_BYTE_SIZE) & + (UART_XMIT_SIZE - 1); + + /* + * If there are any pending burst count, data is handled by + * transmitting DWORDs at a time. + */ + if (valid_burst_count && (xmit->tail < + (UART_XMIT_SIZE - UART_BURST_SIZE))) + break; + } +} + +static void pci1xxxx_tx_burst(struct uart_port *port, u32 uart_status) +{ + struct uart_8250_port *up = up_to_u8250p(port); + u32 valid_byte_count; + int data_empty_count; + struct circ_buf *xmit; + + xmit = &port->state->xmit; + + if (port->x_char) { + writeb(port->x_char, port->membase + UART_TX); + port->icount.tx++; + port->x_char = 0; + return; + } + + if ((uart_tx_stopped(port)) || (uart_circ_empty(xmit))) { + port->ops->stop_tx(port); + } else { + data_empty_count = (pci1xxxx_read_burst_status(port) & + UART_BST_STAT_TX_COUNT_MASK) >> 8; + do { + valid_byte_count = uart_circ_chars_pending(xmit); + + pci1xxxx_process_write_data(port, xmit, + &data_empty_count, + &valid_byte_count); + + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (data_empty_count && valid_byte_count); + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + /* + * With RPM enabled, we have to wait until the FIFO is empty before + * the HW can go idle. So we get here once again with empty FIFO and + * disable the interrupt and RPM in __stop_tx() + */ + if (uart_circ_empty(xmit) && !(up->capabilities & UART_CAP_RPM)) + port->ops->stop_tx(port); +} + static int pci1xxxx_handle_irq(struct uart_port *port) { unsigned long flags; @@ -359,6 +495,9 @@ static int pci1xxxx_handle_irq(struct uart_port *port) if (status & UART_BST_STAT_LSR_RX_MASK) pci1xxxx_rx_burst(port, status); + if (status & UART_BST_STAT_LSR_THRE) + pci1xxxx_tx_burst(port, status); + spin_unlock_irqrestore(&port->lock, flags); return 1; @@ -481,6 +620,17 @@ static int pci1xxxx_setup(struct pci_dev *pdev, port->port.flags |= UPF_FIXED_TYPE | UPF_SKIP_TEST; port->port.type = PORT_MCHP16550A; + /* + * 8250 core considers prescaller value to be always 16. + * The MCHP ports support downscaled mode and hence the + * functional UART clock can be lower, i.e. 62.5MHz, than + * software expects in order to support higher baud rates. + * Assign here 64MHz to support 4Mbps. + * + * The value itself is not really used anywhere except baud + * rate calculations, so we can mangle it as we wish. + */ + port->port.uartclk = 64 * HZ_PER_MHZ; port->port.set_termios = serial8250_do_set_termios; port->port.get_divisor = pci1xxxx_get_divisor; port->port.set_divisor = pci1xxxx_set_divisor; @@ -594,7 +744,6 @@ static int pci1xxxx_serial_probe(struct pci_dev *pdev, memset(&uart, 0, sizeof(uart)); uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT; - uart.port.uartclk = UART_CLOCK_DEFAULT; uart.port.dev = dev; if (num_vectors == max_vec_reqd) diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index c0c34e410c..fc9dd5d452 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2684,12 +2684,8 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port, */ void serial8250_update_uartclk(struct uart_port *port, unsigned int uartclk) { - struct uart_8250_port *up = up_to_u8250p(port); struct tty_port *tport = &port->state->port; - unsigned int baud, quot, frac = 0; - struct ktermios *termios; struct tty_struct *tty; - unsigned long flags; tty = tty_port_tty_get(tport); if (!tty) { @@ -2710,21 +2706,7 @@ void serial8250_update_uartclk(struct uart_port *port, unsigned int uartclk) if (!tty_port_initialized(tport)) goto out_unlock; - termios = &tty->termios; - - baud = serial8250_get_baud_rate(port, termios, NULL); - quot = serial8250_get_divisor(port, baud, &frac); - - serial8250_rpm_get(up); - uart_port_lock_irqsave(port, &flags); - - uart_update_timeout(port, termios->c_cflag, baud); - - serial8250_set_divisor(port, baud, quot, frac); - serial_port_out(port, UART_LCR, up->lcr); - - uart_port_unlock_irqrestore(port, flags); - serial8250_rpm_put(up); + serial8250_do_set_termios(port, &tty->termios, NULL); out_unlock: mutex_unlock(&tport->mutex); diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c index 77686da42c..f1a51b00b1 100644 --- a/drivers/tty/serial/8250/8250_pxa.c +++ b/drivers/tty/serial/8250/8250_pxa.c @@ -92,11 +92,7 @@ static int serial_pxa_probe(struct platform_device *pdev) struct uart_8250_port uart = {}; struct pxa8250_data *data; struct resource *mmres; - int irq, ret; - - irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; + int ret; mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!mmres) @@ -114,21 +110,21 @@ static int serial_pxa_probe(struct platform_device *pdev) if (ret) return ret; - ret = of_alias_get_id(pdev->dev.of_node, "serial"); - if (ret >= 0) - uart.port.line = ret; - uart.port.type = PORT_XSCALE; - uart.port.iotype = UPIO_MEM32; uart.port.mapbase = mmres->start; - uart.port.regshift = 2; - uart.port.irq = irq; - uart.port.fifosize = 64; uart.port.flags = UPF_IOREMAP | UPF_SKIP_TEST | UPF_FIXED_TYPE; uart.port.dev = &pdev->dev; uart.port.uartclk = clk_get_rate(data->clk); uart.port.pm = serial_pxa_pm; uart.port.private_data = data; + + ret = uart_read_port_properties(&uart.port); + if (ret) + return ret; + + uart.port.iotype = UPIO_MEM32; + uart.port.regshift = 2; + uart.port.fifosize = 64; uart.dl_write = serial_pxa_dl_write; ret = serial8250_register_8250_port(&uart); diff --git a/drivers/tty/serial/8250/8250_tegra.c b/drivers/tty/serial/8250/8250_tegra.c index ba352262df..60a80d00d2 100644 --- a/drivers/tty/serial/8250/8250_tegra.c +++ b/drivers/tty/serial/8250/8250_tegra.c @@ -57,25 +57,11 @@ static int tegra_uart_probe(struct platform_device *pdev) port = &port8250.port; spin_lock_init(&port->lock); - port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | - UPF_FIXED_TYPE; - port->iotype = UPIO_MEM32; - port->regshift = 2; + port->flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_FIXED_TYPE; port->type = PORT_TEGRA; - port->irqflags |= IRQF_SHARED; port->dev = &pdev->dev; port->handle_break = tegra_uart_handle_break; - ret = of_alias_get_id(pdev->dev.of_node, "serial"); - if (ret >= 0) - port->line = ret; - - ret = platform_get_irq(pdev, 0); - if (ret < 0) - return ret; - - port->irq = ret; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) return -ENODEV; @@ -88,12 +74,18 @@ static int tegra_uart_probe(struct platform_device *pdev) port->mapbase = res->start; port->mapsize = resource_size(res); + ret = uart_read_port_properties(port); + if (ret) + return ret; + + port->iotype = UPIO_MEM32; + port->regshift = 2; + uart->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL); if (IS_ERR(uart->rst)) return PTR_ERR(uart->rst); - if (device_property_read_u32(&pdev->dev, "clock-frequency", - &port->uartclk)) { + if (!port->uartclk) { uart->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(uart->clk)) { dev_err(&pdev->dev, "failed to get clock!\n"); diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c index 6399a38ecc..670d2ca0f7 100644 --- a/drivers/tty/serial/8250/8250_uniphier.c +++ b/drivers/tty/serial/8250/8250_uniphier.c @@ -162,7 +162,6 @@ static int uniphier_uart_probe(struct platform_device *pdev) struct uniphier8250_priv *priv; struct resource *regs; void __iomem *membase; - int irq; int ret; regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -175,23 +174,12 @@ static int uniphier_uart_probe(struct platform_device *pdev) if (!membase) return -ENOMEM; - irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; memset(&up, 0, sizeof(up)); - ret = of_alias_get_id(dev->of_node, "serial"); - if (ret < 0) { - dev_err(dev, "failed to get alias id\n"); - return ret; - } - up.port.line = ret; - priv->clk = devm_clk_get(dev, NULL); if (IS_ERR(priv->clk)) { dev_err(dev, "failed to get clock\n"); @@ -211,7 +199,10 @@ static int uniphier_uart_probe(struct platform_device *pdev) up.port.mapbase = regs->start; up.port.mapsize = resource_size(regs); up.port.membase = membase; - up.port.irq = irq; + + ret = uart_read_port_properties(&up.port); + if (ret) + return ret; up.port.type = PORT_16550A; up.port.iotype = UPIO_MEM32; diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 8b9a2c4902..47ff50763c 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -149,6 +149,7 @@ config SERIAL_8250_PCI config SERIAL_8250_EXAR tristate "8250/16550 Exar/Commtech PCI/PCIe device support" depends on SERIAL_8250 && PCI + select SERIAL_8250_PCILIB default SERIAL_8250 help This builds support for XR17C1xx, XR17V3xx and some Commtech |