Adding upstream version 6.7.7.upstream/6.7.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 19 insertions, 19 deletions

diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 135a838f51..f4c6ff8064 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -390,10 +390,10 @@ static void serial_omap_throttle(struct uart_port *port)
 	struct uart_omap_port *up = to_uart_omap_port(port);
 	unsigned long flags;
 
-	spin_lock_irqsave(&up->port.lock, flags);
+	uart_port_lock_irqsave(&up->port, &flags);
 	up->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
 	serial_out(up, UART_IER, up->ier);
-	spin_unlock_irqrestore(&up->port.lock, flags);
+	uart_port_unlock_irqrestore(&up->port, flags);
 }
 
 static void serial_omap_unthrottle(struct uart_port *port)
@@ -401,10 +401,10 @@ static void serial_omap_unthrottle(struct uart_port *port)
 	struct uart_omap_port *up = to_uart_omap_port(port);
 	unsigned long flags;
 
-	spin_lock_irqsave(&up->port.lock, flags);
+	uart_port_lock_irqsave(&up->port, &flags);
 	up->ier |= UART_IER_RLSI | UART_IER_RDI;
 	serial_out(up, UART_IER, up->ier);
-	spin_unlock_irqrestore(&up->port.lock, flags);
+	uart_port_unlock_irqrestore(&up->port, flags);
 }
 
 static unsigned int check_modem_status(struct uart_omap_port *up)
@@ -527,7 +527,7 @@ static irqreturn_t serial_omap_irq(int irq, void *dev_id)
 	irqreturn_t ret = IRQ_NONE;
 	int max_count = 256;
 
-	spin_lock(&up->port.lock);
+	uart_port_lock(&up->port);
 
 	do {
 		iir = serial_in(up, UART_IIR);
@@ -563,7 +563,7 @@ static irqreturn_t serial_omap_irq(int irq, void *dev_id)
 		}
 	} while (max_count--);
 
-	spin_unlock(&up->port.lock);
+	uart_port_unlock(&up->port);
 
 	tty_flip_buffer_push(&up->port.state->port);
 
@@ -579,9 +579,9 @@ static unsigned int serial_omap_tx_empty(struct uart_port *port)
 	unsigned int ret = 0;
 
 	dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->port.line);
-	spin_lock_irqsave(&up->port.lock, flags);
+	uart_port_lock_irqsave(&up->port, &flags);
 	ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
-	spin_unlock_irqrestore(&up->port.lock, flags);
+	uart_port_unlock_irqrestore(&up->port, flags);
 
 	return ret;
 }
@@ -647,13 +647,13 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state)
 	unsigned long flags;
 
 	dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->port.line);
-	spin_lock_irqsave(&up->port.lock, flags);
+	uart_port_lock_irqsave(&up->port, &flags);
 	if (break_state == -1)
 		up->lcr |= UART_LCR_SBC;
 	else
 		up->lcr &= ~UART_LCR_SBC;
 	serial_out(up, UART_LCR, up->lcr);
-	spin_unlock_irqrestore(&up->port.lock, flags);
+	uart_port_unlock_irqrestore(&up->port, flags);
 }
 
 static int serial_omap_startup(struct uart_port *port)
@@ -701,13 +701,13 @@ static int serial_omap_startup(struct uart_port *port)
 	 * Now, initialize the UART
 	 */
 	serial_out(up, UART_LCR, UART_LCR_WLEN8);
-	spin_lock_irqsave(&up->port.lock, flags);
+	uart_port_lock_irqsave(&up->port, &flags);
 	/*
 	 * Most PC uarts need OUT2 raised to enable interrupts.
 	 */
 	up->port.mctrl |= TIOCM_OUT2;
 	serial_omap_set_mctrl(&up->port, up->port.mctrl);
-	spin_unlock_irqrestore(&up->port.lock, flags);
+	uart_port_unlock_irqrestore(&up->port, flags);
 
 	up->msr_saved_flags = 0;
 	/*
@@ -742,10 +742,10 @@ static void serial_omap_shutdown(struct uart_port *port)
 	up->ier = 0;
 	serial_out(up, UART_IER, 0);
 
-	spin_lock_irqsave(&up->port.lock, flags);
+	uart_port_lock_irqsave(&up->port, &flags);
 	up->port.mctrl &= ~TIOCM_OUT2;
 	serial_omap_set_mctrl(&up->port, up->port.mctrl);
-	spin_unlock_irqrestore(&up->port.lock, flags);
+	uart_port_unlock_irqrestore(&up->port, flags);
 
 	/*
 	 * Disable break condition and FIFOs
@@ -815,7 +815,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 	 * Ok, we're now changing the port state. Do it with
 	 * interrupts disabled.
 	 */
-	spin_lock_irqsave(&up->port.lock, flags);
+	uart_port_lock_irqsave(&up->port, &flags);
 
 	/*
 	 * Update the per-port timeout.
@@ -1013,7 +1013,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	serial_omap_set_mctrl(&up->port, up->port.mctrl);
 
-	spin_unlock_irqrestore(&up->port.lock, flags);
+	uart_port_unlock_irqrestore(&up->port, flags);
 	dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->port.line);
 }
 
@@ -1216,9 +1216,9 @@ serial_omap_console_write(struct console *co, const char *s,
 	if (up->port.sysrq)
 		locked = 0;
 	else if (oops_in_progress)
-		locked = spin_trylock(&up->port.lock);
+		locked = uart_port_trylock(&up->port);
 	else
-		spin_lock(&up->port.lock);
+		uart_port_lock(&up->port);
 
 	/*
 	 * First save the IER then disable the interrupts
@@ -1245,7 +1245,7 @@ serial_omap_console_write(struct console *co, const char *s,
 		check_modem_status(up);
 
 	if (locked)
-		spin_unlock(&up->port.lock);
+		uart_port_unlock(&up->port);
 	local_irq_restore(flags);
 }