Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 3671 insertions, 0 deletions

diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
new file mode 100644
index 0000000000..083ea4de48
--- /dev/null
+++ b/drivers/tty/serial/serial_core.c
@@ -0,0 +1,3671 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Driver core for serial ports
+ *
+ *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ *  Copyright 1999 ARM Limited
+ *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd.
+ */
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/slab.h>
+#include <linux/sched/signal.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/pm_runtime.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/device.h>
+#include <linux/serial.h> /* for serial_state and serial_icounter_struct */
+#include <linux/serial_core.h>
+#include <linux/sysrq.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/math64.h>
+#include <linux/security.h>
+
+#include <linux/irq.h>
+#include <linux/uaccess.h>
+
+#include "serial_base.h"
+
+/*
+ * This is used to lock changes in serial line configuration.
+ */
+static DEFINE_MUTEX(port_mutex);
+
+/*
+ * lockdep: port->lock is initialized in two places, but we
+ *          want only one lock-class:
+ */
+static struct lock_class_key port_lock_key;
+
+#define HIGH_BITS_OFFSET	((sizeof(long)-sizeof(int))*8)
+
+/*
+ * Max time with active RTS before/after data is sent.
+ */
+#define RS485_MAX_RTS_DELAY	100 /* msecs */
+
+static void uart_change_pm(struct uart_state *state,
+			   enum uart_pm_state pm_state);
+
+static void uart_port_shutdown(struct tty_port *port);
+
+static int uart_dcd_enabled(struct uart_port *uport)
+{
+	return !!(uport->status & UPSTAT_DCD_ENABLE);
+}
+
+static inline struct uart_port *uart_port_ref(struct uart_state *state)
+{
+	if (atomic_add_unless(&state->refcount, 1, 0))
+		return state->uart_port;
+	return NULL;
+}
+
+static inline void uart_port_deref(struct uart_port *uport)
+{
+	if (atomic_dec_and_test(&uport->state->refcount))
+		wake_up(&uport->state->remove_wait);
+}
+
+#define uart_port_lock(state, flags)					\
+	({								\
+		struct uart_port *__uport = uart_port_ref(state);	\
+		if (__uport)						\
+			spin_lock_irqsave(&__uport->lock, flags);	\
+		__uport;						\
+	})
+
+#define uart_port_unlock(uport, flags)					\
+	({								\
+		struct uart_port *__uport = uport;			\
+		if (__uport) {						\
+			spin_unlock_irqrestore(&__uport->lock, flags);	\
+			uart_port_deref(__uport);			\
+		}							\
+	})
+
+static inline struct uart_port *uart_port_check(struct uart_state *state)
+{
+	lockdep_assert_held(&state->port.mutex);
+	return state->uart_port;
+}
+
+/**
+ * uart_write_wakeup - schedule write processing
+ * @port: port to be processed
+ *
+ * This routine is used by the interrupt handler to schedule processing in the
+ * software interrupt portion of the driver. A driver is expected to call this
+ * function when the number of characters in the transmit buffer have dropped
+ * below a threshold.
+ *
+ * Locking: @port->lock should be held
+ */
+void uart_write_wakeup(struct uart_port *port)
+{
+	struct uart_state *state = port->state;
+	/*
+	 * This means you called this function _after_ the port was
+	 * closed.  No cookie for you.
+	 */
+	BUG_ON(!state);
+	tty_port_tty_wakeup(&state->port);
+}
+EXPORT_SYMBOL(uart_write_wakeup);
+
+static void uart_stop(struct tty_struct *tty)
+{
+	struct uart_state *state = tty->driver_data;
+	struct uart_port *port;
+	unsigned long flags;
+
+	port = uart_port_lock(state, flags);
+	if (port)
+		port->ops->stop_tx(port);
+	uart_port_unlock(port, flags);
+}
+
+static void __uart_start(struct uart_state *state)
+{
+	struct uart_port *port = state->uart_port;
+	struct serial_port_device *port_dev;
+	int err;
+
+	if (!port || port->flags & UPF_DEAD || uart_tx_stopped(port))
+		return;
+
+	port_dev = port->port_dev;
+
+	/* Increment the runtime PM usage count for the active check below */
+	err = pm_runtime_get(&port_dev->dev);
+	if (err < 0 && err != -EINPROGRESS) {
+		pm_runtime_put_noidle(&port_dev->dev);
+		return;
+	}
+
+	/*
+	 * Start TX if enabled, and kick runtime PM. If the device is not
+	 * enabled, serial_port_runtime_resume() calls start_tx() again
+	 * after enabling the device.
+	 */
+	if (!pm_runtime_enabled(port->dev) || pm_runtime_active(port->dev))
+		port->ops->start_tx(port);
+	pm_runtime_mark_last_busy(&port_dev->dev);
+	pm_runtime_put_autosuspend(&port_dev->dev);
+}
+
+static void uart_start(struct tty_struct *tty)
+{
+	struct uart_state *state = tty->driver_data;
+	struct uart_port *port;
+	unsigned long flags;
+
+	port = uart_port_lock(state, flags);
+	__uart_start(state);
+	uart_port_unlock(port, flags);
+}
+
+static void
+uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear)
+{
+	unsigned long flags;
+	unsigned int old;
+
+	spin_lock_irqsave(&port->lock, flags);
+	old = port->mctrl;
+	port->mctrl = (old & ~clear) | set;
+	if (old != port->mctrl && !(port->rs485.flags & SER_RS485_ENABLED))
+		port->ops->set_mctrl(port, port->mctrl);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+#define uart_set_mctrl(port, set)	uart_update_mctrl(port, set, 0)
+#define uart_clear_mctrl(port, clear)	uart_update_mctrl(port, 0, clear)
+
+static void uart_port_dtr_rts(struct uart_port *uport, bool active)
+{
+	if (active)
+		uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
+	else
+		uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
+}
+
+/* Caller holds port mutex */
+static void uart_change_line_settings(struct tty_struct *tty, struct uart_state *state,
+				      const struct ktermios *old_termios)
+{
+	struct uart_port *uport = uart_port_check(state);
+	struct ktermios *termios;
+	bool old_hw_stopped;
+
+	/*
+	 * If we have no tty, termios, or the port does not exist,
+	 * then we can't set the parameters for this port.
+	 */
+	if (!tty || uport->type == PORT_UNKNOWN)
+		return;
+
+	termios = &tty->termios;
+	uport->ops->set_termios(uport, termios, old_termios);
+
+	/*
+	 * Set modem status enables based on termios cflag
+	 */
+	spin_lock_irq(&uport->lock);
+	if (termios->c_cflag & CRTSCTS)
+		uport->status |= UPSTAT_CTS_ENABLE;
+	else
+		uport->status &= ~UPSTAT_CTS_ENABLE;
+
+	if (termios->c_cflag & CLOCAL)
+		uport->status &= ~UPSTAT_DCD_ENABLE;
+	else
+		uport->status |= UPSTAT_DCD_ENABLE;
+
+	/* reset sw-assisted CTS flow control based on (possibly) new mode */
+	old_hw_stopped = uport->hw_stopped;
+	uport->hw_stopped = uart_softcts_mode(uport) &&
+			    !(uport->ops->get_mctrl(uport) & TIOCM_CTS);
+	if (uport->hw_stopped != old_hw_stopped) {
+		if (!old_hw_stopped)
+			uport->ops->stop_tx(uport);
+		else
+			__uart_start(state);
+	}
+	spin_unlock_irq(&uport->lock);
+}
+
+/*
+ * Startup the port.  This will be called once per open.  All calls
+ * will be serialised by the per-port mutex.
+ */
+static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
+			     bool init_hw)
+{
+	struct uart_port *uport = uart_port_check(state);
+	unsigned long flags;
+	unsigned long page;
+	int retval = 0;
+
+	if (uport->type == PORT_UNKNOWN)
+		return 1;
+
+	/*
+	 * Make sure the device is in D0 state.
+	 */
+	uart_change_pm(state, UART_PM_STATE_ON);
+
+	/*
+	 * Initialise and allocate the transmit and temporary
+	 * buffer.
+	 */
+	page = get_zeroed_page(GFP_KERNEL);
+	if (!page)
+		return -ENOMEM;
+
+	uart_port_lock(state, flags);
+	if (!state->xmit.buf) {
+		state->xmit.buf = (unsigned char *) page;
+		uart_circ_clear(&state->xmit);
+		uart_port_unlock(uport, flags);
+	} else {
+		uart_port_unlock(uport, flags);
+		/*
+		 * Do not free() the page under the port lock, see
+		 * uart_shutdown().
+		 */
+		free_page(page);
+	}
+
+	retval = uport->ops->startup(uport);
+	if (retval == 0) {
+		if (uart_console(uport) && uport->cons->cflag) {
+			tty->termios.c_cflag = uport->cons->cflag;
+			tty->termios.c_ispeed = uport->cons->ispeed;
+			tty->termios.c_ospeed = uport->cons->ospeed;
+			uport->cons->cflag = 0;
+			uport->cons->ispeed = 0;
+			uport->cons->ospeed = 0;
+		}
+		/*
+		 * Initialise the hardware port settings.
+		 */
+		uart_change_line_settings(tty, state, NULL);
+
+		/*
+		 * Setup the RTS and DTR signals once the
+		 * port is open and ready to respond.
+		 */
+		if (init_hw && C_BAUD(tty))
+			uart_port_dtr_rts(uport, true);
+	}
+
+	/*
+	 * This is to allow setserial on this port. People may want to set
+	 * port/irq/type and then reconfigure the port properly if it failed
+	 * now.
+	 */
+	if (retval && capable(CAP_SYS_ADMIN))
+		return 1;
+
+	return retval;
+}
+
+static int uart_startup(struct tty_struct *tty, struct uart_state *state,
+			bool init_hw)
+{
+	struct tty_port *port = &state->port;
+	int retval;
+
+	if (tty_port_initialized(port))
+		return 0;
+
+	retval = uart_port_startup(tty, state, init_hw);
+	if (retval)
+		set_bit(TTY_IO_ERROR, &tty->flags);
+
+	return retval;
+}
+
+/*
+ * This routine will shutdown a serial port; interrupts are disabled, and
+ * DTR is dropped if the hangup on close termio flag is on.  Calls to
+ * uart_shutdown are serialised by the per-port semaphore.
+ *
+ * uport == NULL if uart_port has already been removed
+ */
+static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
+{
+	struct uart_port *uport = uart_port_check(state);
+	struct tty_port *port = &state->port;
+	unsigned long flags;
+	char *xmit_buf = NULL;
+
+	/*
+	 * Set the TTY IO error marker
+	 */
+	if (tty)
+		set_bit(TTY_IO_ERROR, &tty->flags);
+
+	if (tty_port_initialized(port)) {
+		tty_port_set_initialized(port, false);
+
+		/*
+		 * Turn off DTR and RTS early.
+		 */
+		if (uport && uart_console(uport) && tty) {
+			uport->cons->cflag = tty->termios.c_cflag;
+			uport->cons->ispeed = tty->termios.c_ispeed;
+			uport->cons->ospeed = tty->termios.c_ospeed;
+		}
+
+		if (!tty || C_HUPCL(tty))
+			uart_port_dtr_rts(uport, false);
+
+		uart_port_shutdown(port);
+	}
+
+	/*
+	 * It's possible for shutdown to be called after suspend if we get
+	 * a DCD drop (hangup) at just the right time.  Clear suspended bit so
+	 * we don't try to resume a port that has been shutdown.
+	 */
+	tty_port_set_suspended(port, false);
+
+	/*
+	 * Do not free() the transmit buffer page under the port lock since
+	 * this can create various circular locking scenarios. For instance,
+	 * console driver may need to allocate/free a debug object, which
+	 * can endup in printk() recursion.
+	 */
+	uart_port_lock(state, flags);
+	xmit_buf = state->xmit.buf;
+	state->xmit.buf = NULL;
+	uart_port_unlock(uport, flags);
+
+	free_page((unsigned long)xmit_buf);
+}
+
+/**
+ * uart_update_timeout - update per-port frame timing information
+ * @port: uart_port structure describing the port
+ * @cflag: termios cflag value
+ * @baud: speed of the port
+ *
+ * Set the @port frame timing information from which the FIFO timeout value is
+ * derived. The @cflag value should reflect the actual hardware settings as
+ * number of bits, parity, stop bits and baud rate is taken into account here.
+ *
+ * Locking: caller is expected to take @port->lock
+ */
+void
+uart_update_timeout(struct uart_port *port, unsigned int cflag,
+		    unsigned int baud)
+{
+	unsigned int size = tty_get_frame_size(cflag);
+	u64 frame_time;
+
+	frame_time = (u64)size * NSEC_PER_SEC;
+	port->frame_time = DIV64_U64_ROUND_UP(frame_time, baud);
+}
+EXPORT_SYMBOL(uart_update_timeout);
+
+/**
+ * uart_get_baud_rate - return baud rate for a particular port
+ * @port: uart_port structure describing the port in question.
+ * @termios: desired termios settings
+ * @old: old termios (or %NULL)
+ * @min: minimum acceptable baud rate
+ * @max: maximum acceptable baud rate
+ *
+ * Decode the termios structure into a numeric baud rate, taking account of the
+ * magic 38400 baud rate (with spd_* flags), and mapping the %B0 rate to 9600
+ * baud.
+ *
+ * If the new baud rate is invalid, try the @old termios setting. If it's still
+ * invalid, we try 9600 baud.
+ *
+ * The @termios structure is updated to reflect the baud rate we're actually
+ * going to be using. Don't do this for the case where B0 is requested ("hang
+ * up").
+ *
+ * Locking: caller dependent
+ */
+unsigned int
+uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
+		   const struct ktermios *old, unsigned int min, unsigned int max)
+{
+	unsigned int try;
+	unsigned int baud;
+	unsigned int altbaud;
+	int hung_up = 0;
+	upf_t flags = port->flags & UPF_SPD_MASK;
+
+	switch (flags) {
+	case UPF_SPD_HI:
+		altbaud = 57600;
+		break;
+	case UPF_SPD_VHI:
+		altbaud = 115200;
+		break;
+	case UPF_SPD_SHI:
+		altbaud = 230400;
+		break;
+	case UPF_SPD_WARP:
+		altbaud = 460800;
+		break;
+	default:
+		altbaud = 38400;
+		break;
+	}
+
+	for (try = 0; try < 2; try++) {
+		baud = tty_termios_baud_rate(termios);
+
+		/*
+		 * The spd_hi, spd_vhi, spd_shi, spd_warp kludge...
+		 * Die! Die! Die!
+		 */
+		if (try == 0 && baud == 38400)
+			baud = altbaud;
+
+		/*
+		 * Special case: B0 rate.
+		 */
+		if (baud == 0) {
+			hung_up = 1;
+			baud = 9600;
+		}
+
+		if (baud >= min && baud <= max)
+			return baud;
+
+		/*
+		 * Oops, the quotient was zero.  Try again with
+		 * the old baud rate if possible.
+		 */
+		termios->c_cflag &= ~CBAUD;
+		if (old) {
+			baud = tty_termios_baud_rate(old);
+			if (!hung_up)
+				tty_termios_encode_baud_rate(termios,
+								baud, baud);
+			old = NULL;
+			continue;
+		}
+
+		/*
+		 * As a last resort, if the range cannot be met then clip to
+		 * the nearest chip supported rate.
+		 */
+		if (!hung_up) {
+			if (baud <= min)
+				tty_termios_encode_baud_rate(termios,
+							min + 1, min + 1);
+			else
+				tty_termios_encode_baud_rate(termios,
+							max - 1, max - 1);
+		}
+	}
+	/* Should never happen */
+	WARN_ON(1);
+	return 0;
+}
+EXPORT_SYMBOL(uart_get_baud_rate);
+
+/**
+ * uart_get_divisor - return uart clock divisor
+ * @port: uart_port structure describing the port
+ * @baud: desired baud rate
+ *
+ * Calculate the divisor (baud_base / baud) for the specified @baud,
+ * appropriately rounded.
+ *
+ * If 38400 baud and custom divisor is selected, return the custom divisor
+ * instead.
+ *
+ * Locking: caller dependent
+ */
+unsigned int
+uart_get_divisor(struct uart_port *port, unsigned int baud)
+{
+	unsigned int quot;
+
+	/*
+	 * Old custom speed handling.
+	 */
+	if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
+		quot = port->custom_divisor;
+	else
+		quot = DIV_ROUND_CLOSEST(port->uartclk, 16 * baud);
+
+	return quot;
+}
+EXPORT_SYMBOL(uart_get_divisor);
+
+static int uart_put_char(struct tty_struct *tty, u8 c)
+{
+	struct uart_state *state = tty->driver_data;
+	struct uart_port *port;
+	struct circ_buf *circ;
+	unsigned long flags;
+	int ret = 0;
+
+	circ = &state->xmit;
+	port = uart_port_lock(state, flags);
+	if (!circ->buf) {
+		uart_port_unlock(port, flags);
+		return 0;
+	}
+
+	if (port && uart_circ_chars_free(circ) != 0) {
+		circ->buf[circ->head] = c;
+		circ->head = (circ->head + 1) & (UART_XMIT_SIZE - 1);
+		ret = 1;
+	}
+	uart_port_unlock(port, flags);
+	return ret;
+}
+
+static void uart_flush_chars(struct tty_struct *tty)
+{
+	uart_start(tty);
+}
+
+static ssize_t uart_write(struct tty_struct *tty, const u8 *buf, size_t count)
+{
+	struct uart_state *state = tty->driver_data;
+	struct uart_port *port;
+	struct circ_buf *circ;
+	unsigned long flags;
+	int c, ret = 0;
+
+	/*
+	 * This means you called this function _after_ the port was
+	 * closed.  No cookie for you.
+	 */
+	if (WARN_ON(!state))
+		return -EL3HLT;
+
+	port = uart_port_lock(state, flags);
+	circ = &state->xmit;
+	if (!circ->buf) {
+		uart_port_unlock(port, flags);
+		return 0;
+	}
+
+	while (port) {
+		c = CIRC_SPACE_TO_END(circ->head, circ->tail, UART_XMIT_SIZE);
+		if (count < c)
+			c = count;
+		if (c <= 0)
+			break;
+		memcpy(circ->buf + circ->head, buf, c);
+		circ->head = (circ->head + c) & (UART_XMIT_SIZE - 1);
+		buf += c;
+		count -= c;
+		ret += c;
+	}
+
+	__uart_start(state);
+	uart_port_unlock(port, flags);
+	return ret;
+}
+
+static unsigned int uart_write_room(struct tty_struct *tty)
+{
+	struct uart_state *state = tty->driver_data;
+	struct uart_port *port;
+	unsigned long flags;
+	unsigned int ret;
+
+	port = uart_port_lock(state, flags);
+	ret = uart_circ_chars_free(&state->xmit);
+	uart_port_unlock(port, flags);
+	return ret;
+}
+
+static unsigned int uart_chars_in_buffer(struct tty_struct *tty)
+{
+	struct uart_state *state = tty->driver_data;
+	struct uart_port *port;
+	unsigned long flags;
+	unsigned int ret;
+
+	port = uart_port_lock(state, flags);
+	ret = uart_circ_chars_pending(&state->xmit);
+	uart_port_unlock(port, flags);
+	return ret;
+}
+
+static void uart_flush_buffer(struct tty_struct *tty)
+{
+	struct uart_state *state = tty->driver_data;
+	struct uart_port *port;
+	unsigned long flags;
+
+	/*
+	 * This means you called this function _after_ the port was
+	 * closed.  No cookie for you.
+	 */
+	if (WARN_ON(!state))
+		return;
+
+	pr_debug("uart_flush_buffer(%d) called\n", tty->index);
+
+	port = uart_port_lock(state, flags);
+	if (!port)
+		return;
+	uart_circ_clear(&state->xmit);
+	if (port->ops->flush_buffer)
+		port->ops->flush_buffer(port);
+	uart_port_unlock(port, flags);
+	tty_port_tty_wakeup(&state->port);
+}
+
+/*
+ * This function performs low-level write of high-priority XON/XOFF
+ * character and accounting for it.
+ *
+ * Requires uart_port to implement .serial_out().
+ */
+void uart_xchar_out(struct uart_port *uport, int offset)
+{
+	serial_port_out(uport, offset, uport->x_char);
+	uport->icount.tx++;
+	uport->x_char = 0;
+}
+EXPORT_SYMBOL_GPL(uart_xchar_out);
+
+/*
+ * This function is used to send a high-priority XON/XOFF character to
+ * the device
+ */
+static void uart_send_xchar(struct tty_struct *tty, char ch)
+{
+	struct uart_state *state = tty->driver_data;
+	struct uart_port *port;
+	unsigned long flags;
+
+	port = uart_port_ref(state);
+	if (!port)
+		return;
+
+	if (port->ops->send_xchar)
+		port->ops->send_xchar(port, ch);
+	else {
+		spin_lock_irqsave(&port->lock, flags);
+		port->x_char = ch;
+		if (ch)
+			port->ops->start_tx(port);
+		spin_unlock_irqrestore(&port->lock, flags);
+	}
+	uart_port_deref(port);
+}
+
+static void uart_throttle(struct tty_struct *tty)
+{
+	struct uart_state *state = tty->driver_data;
+	upstat_t mask = UPSTAT_SYNC_FIFO;
+	struct uart_port *port;
+
+	port = uart_port_ref(state);
+	if (!port)
+		return;
+
+	if (I_IXOFF(tty))
+		mask |= UPSTAT_AUTOXOFF;
+	if (C_CRTSCTS(tty))
+		mask |= UPSTAT_AUTORTS;
+
+	if (port->status & mask) {
+		port->ops->throttle(port);
+		mask &= ~port->status;
+	}
+
+	if (mask & UPSTAT_AUTORTS)
+		uart_clear_mctrl(port, TIOCM_RTS);
+
+	if (mask & UPSTAT_AUTOXOFF)
+		uart_send_xchar(tty, STOP_CHAR(tty));
+
+	uart_port_deref(port);
+}
+
+static void uart_unthrottle(struct tty_struct *tty)
+{
+	struct uart_state *state = tty->driver_data;
+	upstat_t mask = UPSTAT_SYNC_FIFO;
+	struct uart_port *port;
+
+	port = uart_port_ref(state);
+	if (!port)
+		return;
+
+	if (I_IXOFF(tty))
+		mask |= UPSTAT_AUTOXOFF;
+	if (C_CRTSCTS(tty))
+		mask |= UPSTAT_AUTORTS;
+
+	if (port->status & mask) {
+		port->ops->unthrottle(port);
+		mask &= ~port->status;
+	}
+
+	if (mask & UPSTAT_AUTORTS)
+		uart_set_mctrl(port, TIOCM_RTS);
+
+	if (mask & UPSTAT_AUTOXOFF)
+		uart_send_xchar(tty, START_CHAR(tty));
+
+	uart_port_deref(port);
+}
+
+static int uart_get_info(struct tty_port *port, struct serial_struct *retinfo)
+{
+	struct uart_state *state = container_of(port, struct uart_state, port);
+	struct uart_port *uport;
+	int ret = -ENODEV;
+
+	/*
+	 * Ensure the state we copy is consistent and no hardware changes
+	 * occur as we go
+	 */
+	mutex_lock(&port->mutex);
+	uport = uart_port_check(state);
+	if (!uport)
+		goto out;
+
+	retinfo->type	    = uport->type;
+	retinfo->line	    = uport->line;
+	retinfo->port	    = uport->iobase;
+	if (HIGH_BITS_OFFSET)
+		retinfo->port_high = (long) uport->iobase >> HIGH_BITS_OFFSET;
+	retinfo->irq		    = uport->irq;
+	retinfo->flags	    = (__force int)uport->flags;
+	retinfo->xmit_fifo_size  = uport->fifosize;
+	retinfo->baud_base	    = uport->uartclk / 16;
+	retinfo->close_delay	    = jiffies_to_msecs(port->close_delay) / 10;
+	retinfo->closing_wait    = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+				ASYNC_CLOSING_WAIT_NONE :
+				jiffies_to_msecs(port->closing_wait) / 10;
+	retinfo->custom_divisor  = uport->custom_divisor;
+	retinfo->hub6	    = uport->hub6;
+	retinfo->io_type         = uport->iotype;
+	retinfo->iomem_reg_shift = uport->regshift;
+	retinfo->iomem_base      = (void *)(unsigned long)uport->mapbase;
+
+	ret = 0;
+out:
+	mutex_unlock(&port->mutex);
+	return ret;
+}
+
+static int uart_get_info_user(struct tty_struct *tty,
+			 struct serial_struct *ss)
+{
+	struct uart_state *state = tty->driver_data;
+	struct tty_port *port = &state->port;
+
+	return uart_get_info(port, ss) < 0 ? -EIO : 0;
+}
+
+static int uart_set_info(struct tty_struct *tty, struct tty_port *port,
+			 struct uart_state *state,
+			 struct serial_struct *new_info)
+{
+	struct uart_port *uport = uart_port_check(state);
+	unsigned long new_port;
+	unsigned int change_irq, change_port, closing_wait;
+	unsigned int old_custom_divisor, close_delay;
+	upf_t old_flags, new_flags;
+	int retval = 0;
+
+	if (!uport)
+		return -EIO;
+
+	new_port = new_info->port;
+	if (HIGH_BITS_OFFSET)
+		new_port += (unsigned long) new_info->port_high << HIGH_BITS_OFFSET;
+
+	new_info->irq = irq_canonicalize(new_info->irq);
+	close_delay = msecs_to_jiffies(new_info->close_delay * 10);
+	closing_wait = new_info->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+			ASYNC_CLOSING_WAIT_NONE :
+			msecs_to_jiffies(new_info->closing_wait * 10);
+
+
+	change_irq  = !(uport->flags & UPF_FIXED_PORT)
+		&& new_info->irq != uport->irq;
+
+	/*
+	 * Since changing the 'type' of the port changes its resource
+	 * allocations, we should treat type changes the same as
+	 * IO port changes.
+	 */
+	change_port = !(uport->flags & UPF_FIXED_PORT)
+		&& (new_port != uport->iobase ||
+		    (unsigned long)new_info->iomem_base != uport->mapbase ||
+		    new_info->hub6 != uport->hub6 ||
+		    new_info->io_type != uport->iotype ||
+		    new_info->iomem_reg_shift != uport->regshift ||
+		    new_info->type != uport->type);
+
+	old_flags = uport->flags;
+	new_flags = (__force upf_t)new_info->flags;
+	old_custom_divisor = uport->custom_divisor;
+
+	if (!capable(CAP_SYS_ADMIN)) {
+		retval = -EPERM;
+		if (change_irq || change_port ||
+		    (new_info->baud_base != uport->uartclk / 16) ||
+		    (close_delay != port->close_delay) ||
+		    (closing_wait != port->closing_wait) ||
+		    (new_info->xmit_fifo_size &&
+		     new_info->xmit_fifo_size != uport->fifosize) ||
+		    (((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0))
+			goto exit;
+		uport->flags = ((uport->flags & ~UPF_USR_MASK) |
+			       (new_flags & UPF_USR_MASK));
+		uport->custom_divisor = new_info->custom_divisor;
+		goto check_and_exit;
+	}
+
+	if (change_irq || change_port) {
+		retval = security_locked_down(LOCKDOWN_TIOCSSERIAL);
+		if (retval)
+			goto exit;
+	}
+
+	/*
+	 * Ask the low level driver to verify the settings.
+	 */
+	if (uport->ops->verify_port)
+		retval = uport->ops->verify_port(uport, new_info);
+
+	if ((new_info->irq >= nr_irqs) || (new_info->irq < 0) ||
+	    (new_info->baud_base < 9600))
+		retval = -EINVAL;
+
+	if (retval)
+		goto exit;
+
+	if (change_port || change_irq) {
+		retval = -EBUSY;
+
+		/*
+		 * Make sure that we are the sole user of this port.
+		 */
+		if (tty_port_users(port) > 1)
+			goto exit;
+
+		/*
+		 * We need to shutdown the serial port at the old
+		 * port/type/irq combination.
+		 */
+		uart_shutdown(tty, state);
+	}
+
+	if (change_port) {
+		unsigned long old_iobase, old_mapbase;
+		unsigned int old_type, old_iotype, old_hub6, old_shift;
+
+		old_iobase = uport->iobase;
+		old_mapbase = uport->mapbase;
+		old_type = uport->type;
+		old_hub6 = uport->hub6;
+		old_iotype = uport->iotype;
+		old_shift = uport->regshift;
+
+		/*
+		 * Free and release old regions
+		 */
+		if (old_type != PORT_UNKNOWN && uport->ops->release_port)
+			uport->ops->release_port(uport);
+
+		uport->iobase = new_port;
+		uport->type = new_info->type;
+		uport->hub6 = new_info->hub6;
+		uport->iotype = new_info->io_type;
+		uport->regshift = new_info->iomem_reg_shift;
+		uport->mapbase = (unsigned long)new_info->iomem_base;
+
+		/*
+		 * Claim and map the new regions
+		 */
+		if (uport->type != PORT_UNKNOWN && uport->ops->request_port) {
+			retval = uport->ops->request_port(uport);
+		} else {
+			/* Always success - Jean II */
+			retval = 0;
+		}
+
+		/*
+		 * If we fail to request resources for the
+		 * new port, try to restore the old settings.
+		 */
+		if (retval) {
+			uport->iobase = old_iobase;
+			uport->type = old_type;
+			uport->hub6 = old_hub6;
+			uport->iotype = old_iotype;
+			uport->regshift = old_shift;
+			uport->mapbase = old_mapbase;
+
+			if (old_type != PORT_UNKNOWN) {
+				retval = uport->ops->request_port(uport);
+				/*
+				 * If we failed to restore the old settings,
+				 * we fail like this.
+				 */
+				if (retval)
+					uport->type = PORT_UNKNOWN;
+
+				/*
+				 * We failed anyway.
+				 */
+				retval = -EBUSY;
+			}
+
+			/* Added to return the correct error -Ram Gupta */
+			goto exit;
+		}
+	}
+
+	if (change_irq)
+		uport->irq      = new_info->irq;
+	if (!(uport->flags & UPF_FIXED_PORT))
+		uport->uartclk  = new_info->baud_base * 16;
+	uport->flags            = (uport->flags & ~UPF_CHANGE_MASK) |
+				 (new_flags & UPF_CHANGE_MASK);
+	uport->custom_divisor   = new_info->custom_divisor;
+	port->close_delay     = close_delay;
+	port->closing_wait    = closing_wait;
+	if (new_info->xmit_fifo_size)
+		uport->fifosize = new_info->xmit_fifo_size;
+
+ check_and_exit:
+	retval = 0;
+	if (uport->type == PORT_UNKNOWN)
+		goto exit;
+	if (tty_port_initialized(port)) {
+		if (((old_flags ^ uport->flags) & UPF_SPD_MASK) ||
+		    old_custom_divisor != uport->custom_divisor) {
+			/*
+			 * If they're setting up a custom divisor or speed,
+			 * instead of clearing it, then bitch about it.
+			 */
+			if (uport->flags & UPF_SPD_MASK) {
+				dev_notice_ratelimited(uport->dev,
+				       "%s sets custom speed on %s. This is deprecated.\n",
+				      current->comm,
+				      tty_name(port->tty));
+			}
+			uart_change_line_settings(tty, state, NULL);
+		}
+	} else {
+		retval = uart_startup(tty, state, true);
+		if (retval == 0)
+			tty_port_set_initialized(port, true);
+		if (retval > 0)
+			retval = 0;
+	}
+ exit:
+	return retval;
+}
+
+static int uart_set_info_user(struct tty_struct *tty, struct serial_struct *ss)
+{
+	struct uart_state *state = tty->driver_data;
+	struct tty_port *port = &state->port;
+	int retval;
+
+	down_write(&tty->termios_rwsem);
+	/*
+	 * This semaphore protects port->count.  It is also
+	 * very useful to prevent opens.  Also, take the
+	 * port configuration semaphore to make sure that a
+	 * module insertion/removal doesn't change anything
+	 * under us.
+	 */
+	mutex_lock(&port->mutex);
+	retval = uart_set_info(tty, port, state, ss);
+	mutex_unlock(&port->mutex);
+	up_write(&tty->termios_rwsem);
+	return retval;
+}
+
+/**
+ * uart_get_lsr_info - get line status register info
+ * @tty: tty associated with the UART
+ * @state: UART being queried
+ * @value: returned modem value
+ */
+static int uart_get_lsr_info(struct tty_struct *tty,
+			struct uart_state *state, unsigned int __user *value)
+{
+	struct uart_port *uport = uart_port_check(state);
+	unsigned int result;
+
+	result = uport->ops->tx_empty(uport);
+
+	/*
+	 * If we're about to load something into the transmit
+	 * register, we'll pretend the transmitter isn't empty to
+	 * avoid a race condition (depending on when the transmit
+	 * interrupt happens).
+	 */
+	if (uport->x_char ||
+	    ((uart_circ_chars_pending(&state->xmit) > 0) &&
+	     !uart_tx_stopped(uport)))
+		result &= ~TIOCSER_TEMT;
+
+	return put_user(result, value);
+}
+
+static int uart_tiocmget(struct tty_struct *tty)
+{
+	struct uart_state *state = tty->driver_data;
+	struct tty_port *port = &state->port;
+	struct uart_port *uport;
+	int result = -EIO;
+
+	mutex_lock(&port->mutex);
+	uport = uart_port_check(state);
+	if (!uport)
+		goto out;
+
+	if (!tty_io_error(tty)) {
+		result = uport->mctrl;
+		spin_lock_irq(&uport->lock);
+		result |= uport->ops->get_mctrl(uport);
+		spin_unlock_irq(&uport->lock);
+	}
+out:
+	mutex_unlock(&port->mutex);
+	return result;
+}
+
+static int
+uart_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear)
+{
+	struct uart_state *state = tty->driver_data;
+	struct tty_port *port = &state->port;
+	struct uart_port *uport;
+	int ret = -EIO;
+
+	mutex_lock(&port->mutex);
+	uport = uart_port_check(state);
+	if (!uport)
+		goto out;
+
+	if (!tty_io_error(tty)) {
+		uart_update_mctrl(uport, set, clear);
+		ret = 0;
+	}
+out:
+	mutex_unlock(&port->mutex);
+	return ret;
+}
+
+static int uart_break_ctl(struct tty_struct *tty, int break_state)
+{
+	struct uart_state *state = tty->driver_data;
+	struct tty_port *port = &state->port;
+	struct uart_port *uport;
+	int ret = -EIO;
+
+	mutex_lock(&port->mutex);
+	uport = uart_port_check(state);
+	if (!uport)
+		goto out;
+
+	if (uport->type != PORT_UNKNOWN && uport->ops->break_ctl)
+		uport->ops->break_ctl(uport, break_state);
+	ret = 0;
+out:
+	mutex_unlock(&port->mutex);
+	return ret;
+}
+
+static int uart_do_autoconfig(struct tty_struct *tty, struct uart_state *state)
+{
+	struct tty_port *port = &state->port;
+	struct uart_port *uport;
+	int flags, ret;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	/*
+	 * Take the per-port semaphore.  This prevents count from
+	 * changing, and hence any extra opens of the port while
+	 * we're auto-configuring.
+	 */
+	if (mutex_lock_interruptible(&port->mutex))
+		return -ERESTARTSYS;
+
+	uport = uart_port_check(state);
+	if (!uport) {
+		ret = -EIO;
+		goto out;
+	}
+
+	ret = -EBUSY;
+	if (tty_port_users(port) == 1) {
+		uart_shutdown(tty, state);
+
+		/*
+		 * If we already have a port type configured,
+		 * we must release its resources.
+		 */
+		if (uport->type != PORT_UNKNOWN && uport->ops->release_port)
+			uport->ops->release_port(uport);
+
+		flags = UART_CONFIG_TYPE;
+		if (uport->flags & UPF_AUTO_IRQ)
+			flags |= UART_CONFIG_IRQ;
+
+		/*
+		 * This will claim the ports resources if
+		 * a port is found.
+		 */
+		uport->ops->config_port(uport, flags);
+
+		ret = uart_startup(tty, state, true);
+		if (ret == 0)
+			tty_port_set_initialized(port, true);
+		if (ret > 0)
+			ret = 0;
+	}
+out:
+	mutex_unlock(&port->mutex);
+	return ret;
+}
+
+static void uart_enable_ms(struct uart_port *uport)
+{
+	/*
+	 * Force modem status interrupts on
+	 */
+	if (uport->ops->enable_ms)
+		uport->ops->enable_ms(uport);
+}
+
+/*
+ * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
+ * - mask passed in arg for lines of interest
+ *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
+ * Caller should use TIOCGICOUNT to see which one it was
+ *
+ * FIXME: This wants extracting into a common all driver implementation
+ * of TIOCMWAIT using tty_port.
+ */
+static int uart_wait_modem_status(struct uart_state *state, unsigned long arg)
+{
+	struct uart_port *uport;
+	struct tty_port *port = &state->port;
+	DECLARE_WAITQUEUE(wait, current);
+	struct uart_icount cprev, cnow;
+	int ret;
+
+	/*
+	 * note the counters on entry
+	 */
+	uport = uart_port_ref(state);
+	if (!uport)
+		return -EIO;
+	spin_lock_irq(&uport->lock);
+	memcpy(&cprev, &uport->icount, sizeof(struct uart_icount));
+	uart_enable_ms(uport);
+	spin_unlock_irq(&uport->lock);
+
+	add_wait_queue(&port->delta_msr_wait, &wait);
+	for (;;) {
+		spin_lock_irq(&uport->lock);
+		memcpy(&cnow, &uport->icount, sizeof(struct uart_icount));
+		spin_unlock_irq(&uport->lock);
+
+		set_current_state(TASK_INTERRUPTIBLE);
+
+		if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+		    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+		    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
+		    ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
+			ret = 0;
+			break;
+		}
+
+		schedule();
+
+		/* see if a signal did it */
+		if (signal_pending(current)) {
+			ret = -ERESTARTSYS;
+			break;
+		}
+
+		cprev = cnow;
+	}
+	__set_current_state(TASK_RUNNING);
+	remove_wait_queue(&port->delta_msr_wait, &wait);
+	uart_port_deref(uport);
+
+	return ret;
+}
+
+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ *     RI where only 0->1 is counted.
+ */
+static int uart_get_icount(struct tty_struct *tty,
+			  struct serial_icounter_struct *icount)
+{
+	struct uart_state *state = tty->driver_data;
+	struct uart_icount cnow;
+	struct uart_port *uport;
+
+	uport = uart_port_ref(state);
+	if (!uport)
+		return -EIO;
+	spin_lock_irq(&uport->lock);
+	memcpy(&cnow, &uport->icount, sizeof(struct uart_icount));
+	spin_unlock_irq(&uport->lock);
+	uart_port_deref(uport);
+
+	icount->cts         = cnow.cts;
+	icount->dsr         = cnow.dsr;
+	icount->rng         = cnow.rng;
+	icount->dcd         = cnow.dcd;
+	icount->rx          = cnow.rx;
+	icount->tx          = cnow.tx;
+	icount->frame       = cnow.frame;
+	icount->overrun     = cnow.overrun;
+	icount->parity      = cnow.parity;
+	icount->brk         = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	return 0;
+}
+
+#define SER_RS485_LEGACY_FLAGS	(SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | \
+				 SER_RS485_RTS_AFTER_SEND | SER_RS485_RX_DURING_TX | \
+				 SER_RS485_TERMINATE_BUS)
+
+static int uart_check_rs485_flags(struct uart_port *port, struct serial_rs485 *rs485)
+{
+	u32 flags = rs485->flags;
+
+	/* Don't return -EINVAL for unsupported legacy flags */
+	flags &= ~SER_RS485_LEGACY_FLAGS;
+
+	/*
+	 * For any bit outside of the legacy ones that is not supported by
+	 * the driver, return -EINVAL.
+	 */
+	if (flags & ~port->rs485_supported.flags)
+		return -EINVAL;
+
+	/* Asking for address w/o addressing mode? */
+	if (!(rs485->flags & SER_RS485_ADDRB) &&
+	    (rs485->flags & (SER_RS485_ADDR_RECV|SER_RS485_ADDR_DEST)))
+		return -EINVAL;
+
+	/* Address given but not enabled? */
+	if (!(rs485->flags & SER_RS485_ADDR_RECV) && rs485->addr_recv)
+		return -EINVAL;
+	if (!(rs485->flags & SER_RS485_ADDR_DEST) && rs485->addr_dest)
+		return -EINVAL;
+
+	return 0;
+}
+
+static void uart_sanitize_serial_rs485_delays(struct uart_port *port,
+					      struct serial_rs485 *rs485)
+{
+	if (!port->rs485_supported.delay_rts_before_send) {
+		if (rs485->delay_rts_before_send) {
+			dev_warn_ratelimited(port->dev,
+				"%s (%d): RTS delay before sending not supported\n",
+				port->name, port->line);
+		}
+		rs485->delay_rts_before_send = 0;
+	} else if (rs485->delay_rts_before_send > RS485_MAX_RTS_DELAY) {
+		rs485->delay_rts_before_send = RS485_MAX_RTS_DELAY;
+		dev_warn_ratelimited(port->dev,
+			"%s (%d): RTS delay before sending clamped to %u ms\n",
+			port->name, port->line, rs485->delay_rts_before_send);
+	}
+
+	if (!port->rs485_supported.delay_rts_after_send) {
+		if (rs485->delay_rts_after_send) {
+			dev_warn_ratelimited(port->dev,
+				"%s (%d): RTS delay after sending not supported\n",
+				port->name, port->line);
+		}
+		rs485->delay_rts_after_send = 0;
+	} else if (rs485->delay_rts_after_send > RS485_MAX_RTS_DELAY) {
+		rs485->delay_rts_after_send = RS485_MAX_RTS_DELAY;
+		dev_warn_ratelimited(port->dev,
+			"%s (%d): RTS delay after sending clamped to %u ms\n",
+			port->name, port->line, rs485->delay_rts_after_send);
+	}
+}
+
+static void uart_sanitize_serial_rs485(struct uart_port *port, struct serial_rs485 *rs485)
+{
+	u32 supported_flags = port->rs485_supported.flags;
+
+	if (!(rs485->flags & SER_RS485_ENABLED)) {
+		memset(rs485, 0, sizeof(*rs485));
+		return;
+	}
+
+	rs485->flags &= supported_flags;
+
+	/* Pick sane settings if the user hasn't */
+	if (!(rs485->flags & SER_RS485_RTS_ON_SEND) ==
+	    !(rs485->flags & SER_RS485_RTS_AFTER_SEND)) {
+		if (supported_flags & SER_RS485_RTS_ON_SEND) {
+			rs485->flags |= SER_RS485_RTS_ON_SEND;
+			rs485->flags &= ~SER_RS485_RTS_AFTER_SEND;
+
+			dev_warn_ratelimited(port->dev,
+				"%s (%d): invalid RTS setting, using RTS_ON_SEND instead\n",
+				port->name, port->line);
+		} else {
+			rs485->flags |= SER_RS485_RTS_AFTER_SEND;
+			rs485->flags &= ~SER_RS485_RTS_ON_SEND;
+
+			dev_warn_ratelimited(port->dev,
+				"%s (%d): invalid RTS setting, using RTS_AFTER_SEND instead\n",
+				port->name, port->line);
+		}
+	}
+
+	uart_sanitize_serial_rs485_delays(port, rs485);
+
+	/* Return clean padding area to userspace */
+	memset(rs485->padding0, 0, sizeof(rs485->padding0));
+	memset(rs485->padding1, 0, sizeof(rs485->padding1));
+}
+
+static void uart_set_rs485_termination(struct uart_port *port,
+				       const struct serial_rs485 *rs485)
+{
+	if (!(rs485->flags & SER_RS485_ENABLED))
+		return;
+
+	gpiod_set_value_cansleep(port->rs485_term_gpio,
+				 !!(rs485->flags & SER_RS485_TERMINATE_BUS));
+}
+
+static void uart_set_rs485_rx_during_tx(struct uart_port *port,
+					const struct serial_rs485 *rs485)
+{
+	if (!(rs485->flags & SER_RS485_ENABLED))
+		return;
+
+	gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio,
+				 !!(rs485->flags & SER_RS485_RX_DURING_TX));
+}
+
+static int uart_rs485_config(struct uart_port *port)
+{
+	struct serial_rs485 *rs485 = &port->rs485;
+	unsigned long flags;
+	int ret;
+
+	if (!(rs485->flags & SER_RS485_ENABLED))
+		return 0;
+
+	uart_sanitize_serial_rs485(port, rs485);
+	uart_set_rs485_termination(port, rs485);
+	uart_set_rs485_rx_during_tx(port, rs485);
+
+	spin_lock_irqsave(&port->lock, flags);
+	ret = port->rs485_config(port, NULL, rs485);
+	spin_unlock_irqrestore(&port->lock, flags);
+	if (ret) {
+		memset(rs485, 0, sizeof(*rs485));
+		/* unset GPIOs */
+		gpiod_set_value_cansleep(port->rs485_term_gpio, 0);
+		gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio, 0);
+	}
+
+	return ret;
+}
+
+static int uart_get_rs485_config(struct uart_port *port,
+			 struct serial_rs485 __user *rs485)
+{
+	unsigned long flags;
+	struct serial_rs485 aux;
+
+	spin_lock_irqsave(&port->lock, flags);
+	aux = port->rs485;
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	if (copy_to_user(rs485, &aux, sizeof(aux)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port,
+			 struct serial_rs485 __user *rs485_user)
+{
+	struct serial_rs485 rs485;
+	int ret;
+	unsigned long flags;
+
+	if (!(port->rs485_supported.flags & SER_RS485_ENABLED))
+		return -ENOTTY;
+
+	if (copy_from_user(&rs485, rs485_user, sizeof(*rs485_user)))
+		return -EFAULT;
+
+	ret = uart_check_rs485_flags(port, &rs485);
+	if (ret)
+		return ret;
+	uart_sanitize_serial_rs485(port, &rs485);
+	uart_set_rs485_termination(port, &rs485);
+	uart_set_rs485_rx_during_tx(port, &rs485);
+
+	spin_lock_irqsave(&port->lock, flags);
+	ret = port->rs485_config(port, &tty->termios, &rs485);
+	if (!ret) {
+		port->rs485 = rs485;
+
+		/* Reset RTS and other mctrl lines when disabling RS485 */
+		if (!(rs485.flags & SER_RS485_ENABLED))
+			port->ops->set_mctrl(port, port->mctrl);
+	}
+	spin_unlock_irqrestore(&port->lock, flags);
+	if (ret) {
+		/* restore old GPIO settings */
+		gpiod_set_value_cansleep(port->rs485_term_gpio,
+			!!(port->rs485.flags & SER_RS485_TERMINATE_BUS));
+		gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio,
+			!!(port->rs485.flags & SER_RS485_RX_DURING_TX));
+		return ret;
+	}
+
+	if (copy_to_user(rs485_user, &port->rs485, sizeof(port->rs485)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static int uart_get_iso7816_config(struct uart_port *port,
+				   struct serial_iso7816 __user *iso7816)
+{
+	unsigned long flags;
+	struct serial_iso7816 aux;
+
+	if (!port->iso7816_config)
+		return -ENOTTY;
+
+	spin_lock_irqsave(&port->lock, flags);
+	aux = port->iso7816;
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	if (copy_to_user(iso7816, &aux, sizeof(aux)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static int uart_set_iso7816_config(struct uart_port *port,
+				   struct serial_iso7816 __user *iso7816_user)
+{
+	struct serial_iso7816 iso7816;
+	int i, ret;
+	unsigned long flags;
+
+	if (!port->iso7816_config)
+		return -ENOTTY;
+
+	if (copy_from_user(&iso7816, iso7816_user, sizeof(*iso7816_user)))
+		return -EFAULT;
+
+	/*
+	 * There are 5 words reserved for future use. Check that userspace
+	 * doesn't put stuff in there to prevent breakages in the future.
+	 */
+	for (i = 0; i < ARRAY_SIZE(iso7816.reserved); i++)
+		if (iso7816.reserved[i])
+			return -EINVAL;
+
+	spin_lock_irqsave(&port->lock, flags);
+	ret = port->iso7816_config(port, &iso7816);
+	spin_unlock_irqrestore(&port->lock, flags);
+	if (ret)
+		return ret;
+
+	if (copy_to_user(iso7816_user, &port->iso7816, sizeof(port->iso7816)))
+		return -EFAULT;
+
+	return 0;
+}
+
+/*
+ * Called via sys_ioctl.  We can use spin_lock_irq() here.
+ */
+static int
+uart_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
+{
+	struct uart_state *state = tty->driver_data;
+	struct tty_port *port = &state->port;
+	struct uart_port *uport;
+	void __user *uarg = (void __user *)arg;
+	int ret = -ENOIOCTLCMD;
+
+
+	/*
+	 * These ioctls don't rely on the hardware to be present.
+	 */
+	switch (cmd) {
+	case TIOCSERCONFIG:
+		down_write(&tty->termios_rwsem);
+		ret = uart_do_autoconfig(tty, state);
+		up_write(&tty->termios_rwsem);
+		break;
+	}
+
+	if (ret != -ENOIOCTLCMD)
+		goto out;
+
+	if (tty_io_error(tty)) {
+		ret = -EIO;
+		goto out;
+	}
+
+	/*
+	 * The following should only be used when hardware is present.
+	 */
+	switch (cmd) {
+	case TIOCMIWAIT:
+		ret = uart_wait_modem_status(state, arg);
+		break;
+	}
+
+	if (ret != -ENOIOCTLCMD)
+		goto out;
+
+	/* rs485_config requires more locking than others */
+	if (cmd == TIOCSRS485)
+		down_write(&tty->termios_rwsem);
+
+	mutex_lock(&port->mutex);
+	uport = uart_port_check(state);
+
+	if (!uport || tty_io_error(tty)) {
+		ret = -EIO;
+		goto out_up;
+	}
+
+	/*
+	 * All these rely on hardware being present and need to be
+	 * protected against the tty being hung up.
+	 */
+
+	switch (cmd) {
+	case TIOCSERGETLSR: /* Get line status register */
+		ret = uart_get_lsr_info(tty, state, uarg);
+		break;
+
+	case TIOCGRS485:
+		ret = uart_get_rs485_config(uport, uarg);
+		break;
+
+	case TIOCSRS485:
+		ret = uart_set_rs485_config(tty, uport, uarg);
+		break;
+
+	case TIOCSISO7816:
+		ret = uart_set_iso7816_config(state->uart_port, uarg);
+		break;
+
+	case TIOCGISO7816:
+		ret = uart_get_iso7816_config(state->uart_port, uarg);
+		break;
+	default:
+		if (uport->ops->ioctl)
+			ret = uport->ops->ioctl(uport, cmd, arg);
+		break;
+	}
+out_up:
+	mutex_unlock(&port->mutex);
+	if (cmd == TIOCSRS485)
+		up_write(&tty->termios_rwsem);
+out:
+	return ret;
+}
+
+static void uart_set_ldisc(struct tty_struct *tty)
+{
+	struct uart_state *state = tty->driver_data;
+	struct uart_port *uport;
+	struct tty_port *port = &state->port;
+
+	if (!tty_port_initialized(port))
+		return;
+
+	mutex_lock(&state->port.mutex);
+	uport = uart_port_check(state);
+	if (uport && uport->ops->set_ldisc)
+		uport->ops->set_ldisc(uport, &tty->termios);
+	mutex_unlock(&state->port.mutex);
+}
+
+static void uart_set_termios(struct tty_struct *tty,
+			     const struct ktermios *old_termios)
+{
+	struct uart_state *state = tty->driver_data;
+	struct uart_port *uport;
+	unsigned int cflag = tty->termios.c_cflag;
+	unsigned int iflag_mask = IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK;
+	bool sw_changed = false;
+
+	mutex_lock(&state->port.mutex);
+	uport = uart_port_check(state);
+	if (!uport)
+		goto out;
+
+	/*
+	 * Drivers doing software flow control also need to know
+	 * about changes to these input settings.
+	 */
+	if (uport->flags & UPF_SOFT_FLOW) {
+		iflag_mask |= IXANY|IXON|IXOFF;
+		sw_changed =
+		   tty->termios.c_cc[VSTART] != old_termios->c_cc[VSTART] ||
+		   tty->termios.c_cc[VSTOP] != old_termios->c_cc[VSTOP];
+	}
+
+	/*
+	 * These are the bits that are used to setup various
+	 * flags in the low level driver. We can ignore the Bfoo
+	 * bits in c_cflag; c_[io]speed will always be set
+	 * appropriately by set_termios() in tty_ioctl.c
+	 */
+	if ((cflag ^ old_termios->c_cflag) == 0 &&
+	    tty->termios.c_ospeed == old_termios->c_ospeed &&
+	    tty->termios.c_ispeed == old_termios->c_ispeed &&
+	    ((tty->termios.c_iflag ^ old_termios->c_iflag) & iflag_mask) == 0 &&
+	    !sw_changed) {
+		goto out;
+	}
+
+	uart_change_line_settings(tty, state, old_termios);
+	/* reload cflag from termios; port driver may have overridden flags */
+	cflag = tty->termios.c_cflag;
+
+	/* Handle transition to B0 status */
+	if (((old_termios->c_cflag & CBAUD) != B0) && ((cflag & CBAUD) == B0))
+		uart_clear_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
+	/* Handle transition away from B0 status */
+	else if (((old_termios->c_cflag & CBAUD) == B0) && ((cflag & CBAUD) != B0)) {
+		unsigned int mask = TIOCM_DTR;
+
+		if (!(cflag & CRTSCTS) || !tty_throttled(tty))
+			mask |= TIOCM_RTS;
+		uart_set_mctrl(uport, mask);
+	}
+out:
+	mutex_unlock(&state->port.mutex);
+}
+
+/*
+ * Calls to uart_close() are serialised via the tty_lock in
+ *   drivers/tty/tty_io.c:tty_release()
+ *   drivers/tty/tty_io.c:do_tty_hangup()
+ */
+static void uart_close(struct tty_struct *tty, struct file *filp)
+{
+	struct uart_state *state = tty->driver_data;
+
+	if (!state) {
+		struct uart_driver *drv = tty->driver->driver_state;
+		struct tty_port *port;
+
+		state = drv->state + tty->index;
+		port = &state->port;
+		spin_lock_irq(&port->lock);
+		--port->count;
+		spin_unlock_irq(&port->lock);
+		return;
+	}
+
+	pr_debug("uart_close(%d) called\n", tty->index);
+
+	tty_port_close(tty->port, tty, filp);
+}
+
+static void uart_tty_port_shutdown(struct tty_port *port)
+{
+	struct uart_state *state = container_of(port, struct uart_state, port);
+	struct uart_port *uport = uart_port_check(state);
+	char *buf;
+
+	/*
+	 * At this point, we stop accepting input.  To do this, we
+	 * disable the receive line status interrupts.
+	 */
+	if (WARN(!uport, "detached port still initialized!\n"))
+		return;
+
+	spin_lock_irq(&uport->lock);
+	uport->ops->stop_rx(uport);
+	spin_unlock_irq(&uport->lock);
+
+	uart_port_shutdown(port);
+
+	/*
+	 * It's possible for shutdown to be called after suspend if we get
+	 * a DCD drop (hangup) at just the right time.  Clear suspended bit so
+	 * we don't try to resume a port that has been shutdown.
+	 */
+	tty_port_set_suspended(port, false);
+
+	/*
+	 * Free the transmit buffer.
+	 */
+	spin_lock_irq(&uport->lock);
+	buf = state->xmit.buf;
+	state->xmit.buf = NULL;
+	spin_unlock_irq(&uport->lock);
+
+	free_page((unsigned long)buf);
+
+	uart_change_pm(state, UART_PM_STATE_OFF);
+}
+
+static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+	struct uart_state *state = tty->driver_data;
+	struct uart_port *port;
+	unsigned long char_time, expire, fifo_timeout;
+
+	port = uart_port_ref(state);
+	if (!port)
+		return;
+
+	if (port->type == PORT_UNKNOWN || port->fifosize == 0) {
+		uart_port_deref(port);
+		return;
+	}
+
+	/*
+	 * Set the check interval to be 1/5 of the estimated time to
+	 * send a single character, and make it at least 1.  The check
+	 * interval should also be less than the timeout.
+	 *
+	 * Note: we have to use pretty tight timings here to satisfy
+	 * the NIST-PCTS.
+	 */
+	char_time = max(nsecs_to_jiffies(port->frame_time / 5), 1UL);
+
+	if (timeout && timeout < char_time)
+		char_time = timeout;
+
+	if (!uart_cts_enabled(port)) {
+		/*
+		 * If the transmitter hasn't cleared in twice the approximate
+		 * amount of time to send the entire FIFO, it probably won't
+		 * ever clear.  This assumes the UART isn't doing flow
+		 * control, which is currently the case.  Hence, if it ever
+		 * takes longer than FIFO timeout, this is probably due to a
+		 * UART bug of some kind.  So, we clamp the timeout parameter at
+		 * 2 * FIFO timeout.
+		 */
+		fifo_timeout = uart_fifo_timeout(port);
+		if (timeout == 0 || timeout > 2 * fifo_timeout)
+			timeout = 2 * fifo_timeout;
+	}
+
+	expire = jiffies + timeout;
+
+	pr_debug("uart_wait_until_sent(%d), jiffies=%lu, expire=%lu...\n",
+		port->line, jiffies, expire);
+
+	/*
+	 * Check whether the transmitter is empty every 'char_time'.
+	 * 'timeout' / 'expire' give us the maximum amount of time
+	 * we wait.
+	 */
+	while (!port->ops->tx_empty(port)) {
+		msleep_interruptible(jiffies_to_msecs(char_time));
+		if (signal_pending(current))
+			break;
+		if (timeout && time_after(jiffies, expire))
+			break;
+	}
+	uart_port_deref(port);
+}
+
+/*
+ * Calls to uart_hangup() are serialised by the tty_lock in
+ *   drivers/tty/tty_io.c:do_tty_hangup()
+ * This runs from a workqueue and can sleep for a _short_ time only.
+ */
+static void uart_hangup(struct tty_struct *tty)
+{
+	struct uart_state *state = tty->driver_data;
+	struct tty_port *port = &state->port;
+	struct uart_port *uport;
+	unsigned long flags;
+
+	pr_debug("uart_hangup(%d)\n", tty->index);
+
+	mutex_lock(&port->mutex);
+	uport = uart_port_check(state);
+	WARN(!uport, "hangup of detached port!\n");
+
+	if (tty_port_active(port)) {
+		uart_flush_buffer(tty);
+		uart_shutdown(tty, state);
+		spin_lock_irqsave(&port->lock, flags);
+		port->count = 0;
+		spin_unlock_irqrestore(&port->lock, flags);
+		tty_port_set_active(port, false);
+		tty_port_tty_set(port, NULL);
+		if (uport && !uart_console(uport))
+			uart_change_pm(state, UART_PM_STATE_OFF);
+		wake_up_interruptible(&port->open_wait);
+		wake_up_interruptible(&port->delta_msr_wait);
+	}
+	mutex_unlock(&port->mutex);
+}
+
+/* uport == NULL if uart_port has already been removed */
+static void uart_port_shutdown(struct tty_port *port)
+{
+	struct uart_state *state = container_of(port, struct uart_state, port);
+	struct uart_port *uport = uart_port_check(state);
+
+	/*
+	 * clear delta_msr_wait queue to avoid mem leaks: we may free
+	 * the irq here so the queue might never be woken up.  Note
+	 * that we won't end up waiting on delta_msr_wait again since
+	 * any outstanding file descriptors should be pointing at
+	 * hung_up_tty_fops now.
+	 */
+	wake_up_interruptible(&port->delta_msr_wait);
+
+	if (uport) {
+		/* Free the IRQ and disable the port. */
+		uport->ops->shutdown(uport);
+
+		/* Ensure that the IRQ handler isn't running on another CPU. */
+		synchronize_irq(uport->irq);
+	}
+}
+
+static bool uart_carrier_raised(struct tty_port *port)
+{
+	struct uart_state *state = container_of(port, struct uart_state, port);
+	struct uart_port *uport;
+	int mctrl;
+
+	uport = uart_port_ref(state);
+	/*
+	 * Should never observe uport == NULL since checks for hangup should
+	 * abort the tty_port_block_til_ready() loop before checking for carrier
+	 * raised -- but report carrier raised if it does anyway so open will
+	 * continue and not sleep
+	 */
+	if (WARN_ON(!uport))
+		return true;
+	spin_lock_irq(&uport->lock);
+	uart_enable_ms(uport);
+	mctrl = uport->ops->get_mctrl(uport);
+	spin_unlock_irq(&uport->lock);
+	uart_port_deref(uport);
+
+	return mctrl & TIOCM_CAR;
+}
+
+static void uart_dtr_rts(struct tty_port *port, bool active)
+{
+	struct uart_state *state = container_of(port, struct uart_state, port);
+	struct uart_port *uport;
+
+	uport = uart_port_ref(state);
+	if (!uport)
+		return;
+	uart_port_dtr_rts(uport, active);
+	uart_port_deref(uport);
+}
+
+static int uart_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+	struct uart_driver *drv = driver->driver_state;
+	struct uart_state *state = drv->state + tty->index;
+
+	tty->driver_data = state;
+
+	return tty_standard_install(driver, tty);
+}
+
+/*
+ * Calls to uart_open are serialised by the tty_lock in
+ *   drivers/tty/tty_io.c:tty_open()
+ * Note that if this fails, then uart_close() _will_ be called.
+ *
+ * In time, we want to scrap the "opening nonpresent ports"
+ * behaviour and implement an alternative way for setserial
+ * to set base addresses/ports/types.  This will allow us to
+ * get rid of a certain amount of extra tests.
+ */
+static int uart_open(struct tty_struct *tty, struct file *filp)
+{
+	struct uart_state *state = tty->driver_data;
+	int retval;
+
+	retval = tty_port_open(&state->port, tty, filp);
+	if (retval > 0)
+		retval = 0;
+
+	return retval;
+}
+
+static int uart_port_activate(struct tty_port *port, struct tty_struct *tty)
+{
+	struct uart_state *state = container_of(port, struct uart_state, port);
+	struct uart_port *uport;
+	int ret;
+
+	uport = uart_port_check(state);
+	if (!uport || uport->flags & UPF_DEAD)
+		return -ENXIO;
+
+	/*
+	 * Start up the serial port.
+	 */
+	ret = uart_startup(tty, state, false);
+	if (ret > 0)
+		tty_port_set_active(port, true);
+
+	return ret;
+}
+
+static const char *uart_type(struct uart_port *port)
+{
+	const char *str = NULL;
+
+	if (port->ops->type)
+		str = port->ops->type(port);
+
+	if (!str)
+		str = "unknown";
+
+	return str;
+}
+
+#ifdef CONFIG_PROC_FS
+
+static void uart_line_info(struct seq_file *m, struct uart_driver *drv, int i)
+{
+	struct uart_state *state = drv->state + i;
+	struct tty_port *port = &state->port;
+	enum uart_pm_state pm_state;
+	struct uart_port *uport;
+	char stat_buf[32];
+	unsigned int status;
+	int mmio;
+
+	mutex_lock(&port->mutex);
+	uport = uart_port_check(state);
+	if (!uport)
+		goto out;
+
+	mmio = uport->iotype >= UPIO_MEM;
+	seq_printf(m, "%d: uart:%s %s%08llX irq:%d",
+			uport->line, uart_type(uport),
+			mmio ? "mmio:0x" : "port:",
+			mmio ? (unsigned long long)uport->mapbase
+			     : (unsigned long long)uport->iobase,
+			uport->irq);
+
+	if (uport->type == PORT_UNKNOWN) {
+		seq_putc(m, '\n');
+		goto out;
+	}
+
+	if (capable(CAP_SYS_ADMIN)) {
+		pm_state = state->pm_state;
+		if (pm_state != UART_PM_STATE_ON)
+			uart_change_pm(state, UART_PM_STATE_ON);
+		spin_lock_irq(&uport->lock);
+		status = uport->ops->get_mctrl(uport);
+		spin_unlock_irq(&uport->lock);
+		if (pm_state != UART_PM_STATE_ON)
+			uart_change_pm(state, pm_state);
+
+		seq_printf(m, " tx:%d rx:%d",
+				uport->icount.tx, uport->icount.rx);
+		if (uport->icount.frame)
+			seq_printf(m, " fe:%d",	uport->icount.frame);
+		if (uport->icount.parity)
+			seq_printf(m, " pe:%d",	uport->icount.parity);
+		if (uport->icount.brk)
+			seq_printf(m, " brk:%d", uport->icount.brk);
+		if (uport->icount.overrun)
+			seq_printf(m, " oe:%d", uport->icount.overrun);
+		if (uport->icount.buf_overrun)
+			seq_printf(m, " bo:%d", uport->icount.buf_overrun);
+
+#define INFOBIT(bit, str) \
+	if (uport->mctrl & (bit)) \
+		strncat(stat_buf, (str), sizeof(stat_buf) - \
+			strlen(stat_buf) - 2)
+#define STATBIT(bit, str) \
+	if (status & (bit)) \
+		strncat(stat_buf, (str), sizeof(stat_buf) - \
+		       strlen(stat_buf) - 2)
+
+		stat_buf[0] = '\0';
+		stat_buf[1] = '\0';
+		INFOBIT(TIOCM_RTS, "|RTS");
+		STATBIT(TIOCM_CTS, "|CTS");
+		INFOBIT(TIOCM_DTR, "|DTR");
+		STATBIT(TIOCM_DSR, "|DSR");
+		STATBIT(TIOCM_CAR, "|CD");
+		STATBIT(TIOCM_RNG, "|RI");
+		if (stat_buf[0])
+			stat_buf[0] = ' ';
+
+		seq_puts(m, stat_buf);
+	}
+	seq_putc(m, '\n');
+#undef STATBIT
+#undef INFOBIT
+out:
+	mutex_unlock(&port->mutex);
+}
+
+static int uart_proc_show(struct seq_file *m, void *v)
+{
+	struct tty_driver *ttydrv = m->private;
+	struct uart_driver *drv = ttydrv->driver_state;
+	int i;
+
+	seq_printf(m, "serinfo:1.0 driver%s%s revision:%s\n", "", "", "");
+	for (i = 0; i < drv->nr; i++)
+		uart_line_info(m, drv, i);
+	return 0;
+}
+#endif
+
+static void uart_port_spin_lock_init(struct uart_port *port)
+{
+	spin_lock_init(&port->lock);
+	lockdep_set_class(&port->lock, &port_lock_key);
+}
+
+#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(CONFIG_CONSOLE_POLL)
+/**
+ * uart_console_write - write a console message to a serial port
+ * @port: the port to write the message
+ * @s: array of characters
+ * @count: number of characters in string to write
+ * @putchar: function to write character to port
+ */
+void uart_console_write(struct uart_port *port, const char *s,
+			unsigned int count,
+			void (*putchar)(struct uart_port *, unsigned char))
+{
+	unsigned int i;
+
+	for (i = 0; i < count; i++, s++) {
+		if (*s == '\n')
+			putchar(port, '\r');
+		putchar(port, *s);
+	}
+}
+EXPORT_SYMBOL_GPL(uart_console_write);
+
+/**
+ * uart_get_console - get uart port for console
+ * @ports: ports to search in
+ * @nr: number of @ports
+ * @co: console to search for
+ * Returns: uart_port for the console @co
+ *
+ * Check whether an invalid uart number has been specified (as @co->index), and
+ * if so, search for the first available port that does have console support.
+ */
+struct uart_port * __init
+uart_get_console(struct uart_port *ports, int nr, struct console *co)
+{
+	int idx = co->index;
+
+	if (idx < 0 || idx >= nr || (ports[idx].iobase == 0 &&
+				     ports[idx].membase == NULL))
+		for (idx = 0; idx < nr; idx++)
+			if (ports[idx].iobase != 0 ||
+			    ports[idx].membase != NULL)
+				break;
+
+	co->index = idx;
+
+	return ports + idx;
+}
+
+/**
+ * uart_parse_earlycon - Parse earlycon options
+ * @p:	     ptr to 2nd field (ie., just beyond '<name>,')
+ * @iotype:  ptr for decoded iotype (out)
+ * @addr:    ptr for decoded mapbase/iobase (out)
+ * @options: ptr for <options> field; %NULL if not present (out)
+ *
+ * Decodes earlycon kernel command line parameters of the form:
+ *  * earlycon=<name>,io|mmio|mmio16|mmio32|mmio32be|mmio32native,<addr>,<options>
+ *  * console=<name>,io|mmio|mmio16|mmio32|mmio32be|mmio32native,<addr>,<options>
+ *
+ * The optional form:
+ *  * earlycon=<name>,0x<addr>,<options>
+ *  * console=<name>,0x<addr>,<options>
+ *
+ * is also accepted; the returned @iotype will be %UPIO_MEM.
+ *
+ * Returns: 0 on success or -%EINVAL on failure
+ */
+int uart_parse_earlycon(char *p, unsigned char *iotype, resource_size_t *addr,
+			char **options)
+{
+	if (strncmp(p, "mmio,", 5) == 0) {
+		*iotype = UPIO_MEM;
+		p += 5;
+	} else if (strncmp(p, "mmio16,", 7) == 0) {
+		*iotype = UPIO_MEM16;
+		p += 7;
+	} else if (strncmp(p, "mmio32,", 7) == 0) {
+		*iotype = UPIO_MEM32;
+		p += 7;
+	} else if (strncmp(p, "mmio32be,", 9) == 0) {
+		*iotype = UPIO_MEM32BE;
+		p += 9;
+	} else if (strncmp(p, "mmio32native,", 13) == 0) {
+		*iotype = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) ?
+			UPIO_MEM32BE : UPIO_MEM32;
+		p += 13;
+	} else if (strncmp(p, "io,", 3) == 0) {
+		*iotype = UPIO_PORT;
+		p += 3;
+	} else if (strncmp(p, "0x", 2) == 0) {
+		*iotype = UPIO_MEM;
+	} else {
+		return -EINVAL;
+	}
+
+	/*
+	 * Before you replace it with kstrtoull(), think about options separator
+	 * (',') it will not tolerate
+	 */
+	*addr = simple_strtoull(p, NULL, 0);
+	p = strchr(p, ',');
+	if (p)
+		p++;
+
+	*options = p;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(uart_parse_earlycon);
+
+/**
+ * uart_parse_options - Parse serial port baud/parity/bits/flow control.
+ * @options: pointer to option string
+ * @baud: pointer to an 'int' variable for the baud rate.
+ * @parity: pointer to an 'int' variable for the parity.
+ * @bits: pointer to an 'int' variable for the number of data bits.
+ * @flow: pointer to an 'int' variable for the flow control character.
+ *
+ * uart_parse_options() decodes a string containing the serial console
+ * options. The format of the string is <baud><parity><bits><flow>,
+ * eg: 115200n8r
+ */
+void
+uart_parse_options(const char *options, int *baud, int *parity,
+		   int *bits, int *flow)
+{
+	const char *s = options;
+
+	*baud = simple_strtoul(s, NULL, 10);
+	while (*s >= '0' && *s <= '9')
+		s++;
+	if (*s)
+		*parity = *s++;
+	if (*s)
+		*bits = *s++ - '0';
+	if (*s)
+		*flow = *s;
+}
+EXPORT_SYMBOL_GPL(uart_parse_options);
+
+/**
+ * uart_set_options - setup the serial console parameters
+ * @port: pointer to the serial ports uart_port structure
+ * @co: console pointer
+ * @baud: baud rate
+ * @parity: parity character - 'n' (none), 'o' (odd), 'e' (even)
+ * @bits: number of data bits
+ * @flow: flow control character - 'r' (rts)
+ *
+ * Locking: Caller must hold console_list_lock in order to serialize
+ * early initialization of the serial-console lock.
+ */
+int
+uart_set_options(struct uart_port *port, struct console *co,
+		 int baud, int parity, int bits, int flow)
+{
+	struct ktermios termios;
+	static struct ktermios dummy;
+
+	/*
+	 * Ensure that the serial-console lock is initialised early.
+	 *
+	 * Note that the console-registered check is needed because
+	 * kgdboc can call uart_set_options() for an already registered
+	 * console via tty_find_polling_driver() and uart_poll_init().
+	 */
+	if (!uart_console_registered_locked(port) && !port->console_reinit)
+		uart_port_spin_lock_init(port);
+
+	memset(&termios, 0, sizeof(struct ktermios));
+
+	termios.c_cflag |= CREAD | HUPCL | CLOCAL;
+	tty_termios_encode_baud_rate(&termios, baud, baud);
+
+	if (bits == 7)
+		termios.c_cflag |= CS7;
+	else
+		termios.c_cflag |= CS8;
+
+	switch (parity) {
+	case 'o': case 'O':
+		termios.c_cflag |= PARODD;
+		fallthrough;
+	case 'e': case 'E':
+		termios.c_cflag |= PARENB;
+		break;
+	}
+
+	if (flow == 'r')
+		termios.c_cflag |= CRTSCTS;
+
+	/*
+	 * some uarts on other side don't support no flow control.
+	 * So we set * DTR in host uart to make them happy
+	 */
+	port->mctrl |= TIOCM_DTR;
+
+	port->ops->set_termios(port, &termios, &dummy);
+	/*
+	 * Allow the setting of the UART parameters with a NULL console
+	 * too:
+	 */
+	if (co) {
+		co->cflag = termios.c_cflag;
+		co->ispeed = termios.c_ispeed;
+		co->ospeed = termios.c_ospeed;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(uart_set_options);
+#endif /* CONFIG_SERIAL_CORE_CONSOLE */
+
+/**
+ * uart_change_pm - set power state of the port
+ *
+ * @state: port descriptor
+ * @pm_state: new state
+ *
+ * Locking: port->mutex has to be held
+ */
+static void uart_change_pm(struct uart_state *state,
+			   enum uart_pm_state pm_state)
+{
+	struct uart_port *port = uart_port_check(state);
+
+	if (state->pm_state != pm_state) {
+		if (port && port->ops->pm)
+			port->ops->pm(port, pm_state, state->pm_state);
+		state->pm_state = pm_state;
+	}
+}
+
+struct uart_match {
+	struct uart_port *port;
+	struct uart_driver *driver;
+};
+
+static int serial_match_port(struct device *dev, void *data)
+{
+	struct uart_match *match = data;
+	struct tty_driver *tty_drv = match->driver->tty_driver;
+	dev_t devt = MKDEV(tty_drv->major, tty_drv->minor_start) +
+		match->port->line;
+
+	return dev->devt == devt; /* Actually, only one tty per port */
+}
+
+int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
+{
+	struct uart_state *state = drv->state + uport->line;
+	struct tty_port *port = &state->port;
+	struct device *tty_dev;
+	struct uart_match match = {uport, drv};
+
+	mutex_lock(&port->mutex);
+
+	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
+	if (tty_dev && device_may_wakeup(tty_dev)) {
+		enable_irq_wake(uport->irq);
+		put_device(tty_dev);
+		mutex_unlock(&port->mutex);
+		return 0;
+	}
+	put_device(tty_dev);
+
+	/*
+	 * Nothing to do if the console is not suspending
+	 * except stop_rx to prevent any asynchronous data
+	 * over RX line. However ensure that we will be
+	 * able to Re-start_rx later.
+	 */
+	if (!console_suspend_enabled && uart_console(uport)) {
+		if (uport->ops->start_rx) {
+			spin_lock_irq(&uport->lock);
+			uport->ops->stop_rx(uport);
+			spin_unlock_irq(&uport->lock);
+		}
+		goto unlock;
+	}
+
+	uport->suspended = 1;
+
+	if (tty_port_initialized(port)) {
+		const struct uart_ops *ops = uport->ops;
+		int tries;
+		unsigned int mctrl;
+
+		tty_port_set_suspended(port, true);
+		tty_port_set_initialized(port, false);
+
+		spin_lock_irq(&uport->lock);
+		ops->stop_tx(uport);
+		if (!(uport->rs485.flags & SER_RS485_ENABLED))
+			ops->set_mctrl(uport, 0);
+		/* save mctrl so it can be restored on resume */
+		mctrl = uport->mctrl;
+		uport->mctrl = 0;
+		ops->stop_rx(uport);
+		spin_unlock_irq(&uport->lock);
+
+		/*
+		 * Wait for the transmitter to empty.
+		 */
+		for (tries = 3; !ops->tx_empty(uport) && tries; tries--)
+			msleep(10);
+		if (!tries)
+			dev_err(uport->dev, "%s: Unable to drain transmitter\n",
+				uport->name);
+
+		ops->shutdown(uport);
+		uport->mctrl = mctrl;
+	}
+
+	/*
+	 * Disable the console device before suspending.
+	 */
+	if (uart_console(uport))
+		console_stop(uport->cons);
+
+	uart_change_pm(state, UART_PM_STATE_OFF);
+unlock:
+	mutex_unlock(&port->mutex);
+
+	return 0;
+}
+EXPORT_SYMBOL(uart_suspend_port);
+
+int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
+{
+	struct uart_state *state = drv->state + uport->line;
+	struct tty_port *port = &state->port;
+	struct device *tty_dev;
+	struct uart_match match = {uport, drv};
+	struct ktermios termios;
+
+	mutex_lock(&port->mutex);
+
+	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
+	if (!uport->suspended && device_may_wakeup(tty_dev)) {
+		if (irqd_is_wakeup_set(irq_get_irq_data((uport->irq))))
+			disable_irq_wake(uport->irq);
+		put_device(tty_dev);
+		mutex_unlock(&port->mutex);
+		return 0;
+	}
+	put_device(tty_dev);
+	uport->suspended = 0;
+
+	/*
+	 * Re-enable the console device after suspending.
+	 */
+	if (uart_console(uport)) {
+		/*
+		 * First try to use the console cflag setting.
+		 */
+		memset(&termios, 0, sizeof(struct ktermios));
+		termios.c_cflag = uport->cons->cflag;
+		termios.c_ispeed = uport->cons->ispeed;
+		termios.c_ospeed = uport->cons->ospeed;
+
+		/*
+		 * If that's unset, use the tty termios setting.
+		 */
+		if (port->tty && termios.c_cflag == 0)
+			termios = port->tty->termios;
+
+		if (console_suspend_enabled)
+			uart_change_pm(state, UART_PM_STATE_ON);
+		uport->ops->set_termios(uport, &termios, NULL);
+		if (!console_suspend_enabled && uport->ops->start_rx) {
+			spin_lock_irq(&uport->lock);
+			uport->ops->start_rx(uport);
+			spin_unlock_irq(&uport->lock);
+		}
+		if (console_suspend_enabled)
+			console_start(uport->cons);
+	}
+
+	if (tty_port_suspended(port)) {
+		const struct uart_ops *ops = uport->ops;
+		int ret;
+
+		uart_change_pm(state, UART_PM_STATE_ON);
+		spin_lock_irq(&uport->lock);
+		if (!(uport->rs485.flags & SER_RS485_ENABLED))
+			ops->set_mctrl(uport, 0);
+		spin_unlock_irq(&uport->lock);
+		if (console_suspend_enabled || !uart_console(uport)) {
+			/* Protected by port mutex for now */
+			struct tty_struct *tty = port->tty;
+
+			ret = ops->startup(uport);
+			if (ret == 0) {
+				if (tty)
+					uart_change_line_settings(tty, state, NULL);
+				uart_rs485_config(uport);
+				spin_lock_irq(&uport->lock);
+				if (!(uport->rs485.flags & SER_RS485_ENABLED))
+					ops->set_mctrl(uport, uport->mctrl);
+				ops->start_tx(uport);
+				spin_unlock_irq(&uport->lock);
+				tty_port_set_initialized(port, true);
+			} else {
+				/*
+				 * Failed to resume - maybe hardware went away?
+				 * Clear the "initialized" flag so we won't try
+				 * to call the low level drivers shutdown method.
+				 */
+				uart_shutdown(tty, state);
+			}
+		}
+
+		tty_port_set_suspended(port, false);
+	}
+
+	mutex_unlock(&port->mutex);
+
+	return 0;
+}
+EXPORT_SYMBOL(uart_resume_port);
+
+static inline void
+uart_report_port(struct uart_driver *drv, struct uart_port *port)
+{
+	char address[64];
+
+	switch (port->iotype) {
+	case UPIO_PORT:
+		snprintf(address, sizeof(address), "I/O 0x%lx", port->iobase);
+		break;
+	case UPIO_HUB6:
+		snprintf(address, sizeof(address),
+			 "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
+		break;
+	case UPIO_MEM:
+	case UPIO_MEM16:
+	case UPIO_MEM32:
+	case UPIO_MEM32BE:
+	case UPIO_AU:
+	case UPIO_TSI:
+		snprintf(address, sizeof(address),
+			 "MMIO 0x%llx", (unsigned long long)port->mapbase);
+		break;
+	default:
+		strscpy(address, "*unknown*", sizeof(address));
+		break;
+	}
+
+	pr_info("%s%s%s at %s (irq = %d, base_baud = %d) is a %s\n",
+	       port->dev ? dev_name(port->dev) : "",
+	       port->dev ? ": " : "",
+	       port->name,
+	       address, port->irq, port->uartclk / 16, uart_type(port));
+
+	/* The magic multiplier feature is a bit obscure, so report it too.  */
+	if (port->flags & UPF_MAGIC_MULTIPLIER)
+		pr_info("%s%s%s extra baud rates supported: %d, %d",
+			port->dev ? dev_name(port->dev) : "",
+			port->dev ? ": " : "",
+			port->name,
+			port->uartclk / 8, port->uartclk / 4);
+}
+
+static void
+uart_configure_port(struct uart_driver *drv, struct uart_state *state,
+		    struct uart_port *port)
+{
+	unsigned int flags;
+
+	/*
+	 * If there isn't a port here, don't do anything further.
+	 */
+	if (!port->iobase && !port->mapbase && !port->membase)
+		return;
+
+	/*
+	 * Now do the auto configuration stuff.  Note that config_port
+	 * is expected to claim the resources and map the port for us.
+	 */
+	flags = 0;
+	if (port->flags & UPF_AUTO_IRQ)
+		flags |= UART_CONFIG_IRQ;
+	if (port->flags & UPF_BOOT_AUTOCONF) {
+		if (!(port->flags & UPF_FIXED_TYPE)) {
+			port->type = PORT_UNKNOWN;
+			flags |= UART_CONFIG_TYPE;
+		}
+		port->ops->config_port(port, flags);
+	}
+
+	if (port->type != PORT_UNKNOWN) {
+		unsigned long flags;
+
+		uart_report_port(drv, port);
+
+		/* Power up port for set_mctrl() */
+		uart_change_pm(state, UART_PM_STATE_ON);
+
+		/*
+		 * Ensure that the modem control lines are de-activated.
+		 * keep the DTR setting that is set in uart_set_options()
+		 * We probably don't need a spinlock around this, but
+		 */
+		spin_lock_irqsave(&port->lock, flags);
+		port->mctrl &= TIOCM_DTR;
+		if (!(port->rs485.flags & SER_RS485_ENABLED))
+			port->ops->set_mctrl(port, port->mctrl);
+		spin_unlock_irqrestore(&port->lock, flags);
+
+		uart_rs485_config(port);
+
+		/*
+		 * If this driver supports console, and it hasn't been
+		 * successfully registered yet, try to re-register it.
+		 * It may be that the port was not available.
+		 */
+		if (port->cons && !console_is_registered(port->cons))
+			register_console(port->cons);
+
+		/*
+		 * Power down all ports by default, except the
+		 * console if we have one.
+		 */
+		if (!uart_console(port))
+			uart_change_pm(state, UART_PM_STATE_OFF);
+	}
+}
+
+#ifdef CONFIG_CONSOLE_POLL
+
+static int uart_poll_init(struct tty_driver *driver, int line, char *options)
+{
+	struct uart_driver *drv = driver->driver_state;
+	struct uart_state *state = drv->state + line;
+	enum uart_pm_state pm_state;
+	struct tty_port *tport;
+	struct uart_port *port;
+	int baud = 9600;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+	int ret = 0;
+
+	tport = &state->port;
+	mutex_lock(&tport->mutex);
+
+	port = uart_port_check(state);
+	if (!port || !(port->ops->poll_get_char && port->ops->poll_put_char)) {
+		ret = -1;
+		goto out;
+	}
+
+	pm_state = state->pm_state;
+	uart_change_pm(state, UART_PM_STATE_ON);
+
+	if (port->ops->poll_init) {
+		/*
+		 * We don't set initialized as we only initialized the hw,
+		 * e.g. state->xmit is still uninitialized.
+		 */
+		if (!tty_port_initialized(tport))
+			ret = port->ops->poll_init(port);
+	}
+
+	if (!ret && options) {
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+		console_list_lock();
+		ret = uart_set_options(port, NULL, baud, parity, bits, flow);
+		console_list_unlock();
+	}
+out:
+	if (ret)
+		uart_change_pm(state, pm_state);
+	mutex_unlock(&tport->mutex);
+	return ret;
+}
+
+static int uart_poll_get_char(struct tty_driver *driver, int line)
+{
+	struct uart_driver *drv = driver->driver_state;
+	struct uart_state *state = drv->state + line;
+	struct uart_port *port;
+	int ret = -1;
+
+	port = uart_port_ref(state);
+	if (port) {
+		ret = port->ops->poll_get_char(port);
+		uart_port_deref(port);
+	}
+
+	return ret;
+}
+
+static void uart_poll_put_char(struct tty_driver *driver, int line, char ch)
+{
+	struct uart_driver *drv = driver->driver_state;
+	struct uart_state *state = drv->state + line;
+	struct uart_port *port;
+
+	port = uart_port_ref(state);
+	if (!port)
+		return;
+
+	if (ch == '\n')
+		port->ops->poll_put_char(port, '\r');
+	port->ops->poll_put_char(port, ch);
+	uart_port_deref(port);
+}
+#endif
+
+static const struct tty_operations uart_ops = {
+	.install	= uart_install,
+	.open		= uart_open,
+	.close		= uart_close,
+	.write		= uart_write,
+	.put_char	= uart_put_char,
+	.flush_chars	= uart_flush_chars,
+	.write_room	= uart_write_room,
+	.chars_in_buffer= uart_chars_in_buffer,
+	.flush_buffer	= uart_flush_buffer,
+	.ioctl		= uart_ioctl,
+	.throttle	= uart_throttle,
+	.unthrottle	= uart_unthrottle,
+	.send_xchar	= uart_send_xchar,
+	.set_termios	= uart_set_termios,
+	.set_ldisc	= uart_set_ldisc,
+	.stop		= uart_stop,
+	.start		= uart_start,
+	.hangup		= uart_hangup,
+	.break_ctl	= uart_break_ctl,
+	.wait_until_sent= uart_wait_until_sent,
+#ifdef CONFIG_PROC_FS
+	.proc_show	= uart_proc_show,
+#endif
+	.tiocmget	= uart_tiocmget,
+	.tiocmset	= uart_tiocmset,
+	.set_serial	= uart_set_info_user,
+	.get_serial	= uart_get_info_user,
+	.get_icount	= uart_get_icount,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_init	= uart_poll_init,
+	.poll_get_char	= uart_poll_get_char,
+	.poll_put_char	= uart_poll_put_char,
+#endif
+};
+
+static const struct tty_port_operations uart_port_ops = {
+	.carrier_raised = uart_carrier_raised,
+	.dtr_rts	= uart_dtr_rts,
+	.activate	= uart_port_activate,
+	.shutdown	= uart_tty_port_shutdown,
+};
+
+/**
+ * uart_register_driver - register a driver with the uart core layer
+ * @drv: low level driver structure
+ *
+ * Register a uart driver with the core driver. We in turn register with the
+ * tty layer, and initialise the core driver per-port state.
+ *
+ * We have a proc file in /proc/tty/driver which is named after the normal
+ * driver.
+ *
+ * @drv->port should be %NULL, and the per-port structures should be registered
+ * using uart_add_one_port() after this call has succeeded.
+ *
+ * Locking: none, Interrupts: enabled
+ */
+int uart_register_driver(struct uart_driver *drv)
+{
+	struct tty_driver *normal;
+	int i, retval = -ENOMEM;
+
+	BUG_ON(drv->state);
+
+	/*
+	 * Maybe we should be using a slab cache for this, especially if
+	 * we have a large number of ports to handle.
+	 */
+	drv->state = kcalloc(drv->nr, sizeof(struct uart_state), GFP_KERNEL);
+	if (!drv->state)
+		goto out;
+
+	normal = tty_alloc_driver(drv->nr, TTY_DRIVER_REAL_RAW |
+			TTY_DRIVER_DYNAMIC_DEV);
+	if (IS_ERR(normal)) {
+		retval = PTR_ERR(normal);
+		goto out_kfree;
+	}
+
+	drv->tty_driver = normal;
+
+	normal->driver_name	= drv->driver_name;
+	normal->name		= drv->dev_name;
+	normal->major		= drv->major;
+	normal->minor_start	= drv->minor;
+	normal->type		= TTY_DRIVER_TYPE_SERIAL;
+	normal->subtype		= SERIAL_TYPE_NORMAL;
+	normal->init_termios	= tty_std_termios;
+	normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	normal->init_termios.c_ispeed = normal->init_termios.c_ospeed = 9600;
+	normal->driver_state    = drv;
+	tty_set_operations(normal, &uart_ops);
+
+	/*
+	 * Initialise the UART state(s).
+	 */
+	for (i = 0; i < drv->nr; i++) {
+		struct uart_state *state = drv->state + i;
+		struct tty_port *port = &state->port;
+
+		tty_port_init(port);
+		port->ops = &uart_port_ops;
+	}
+
+	retval = tty_register_driver(normal);
+	if (retval >= 0)
+		return retval;
+
+	for (i = 0; i < drv->nr; i++)
+		tty_port_destroy(&drv->state[i].port);
+	tty_driver_kref_put(normal);
+out_kfree:
+	kfree(drv->state);
+out:
+	return retval;
+}
+EXPORT_SYMBOL(uart_register_driver);
+
+/**
+ * uart_unregister_driver - remove a driver from the uart core layer
+ * @drv: low level driver structure
+ *
+ * Remove all references to a driver from the core driver. The low level
+ * driver must have removed all its ports via the uart_remove_one_port() if it
+ * registered them with uart_add_one_port(). (I.e. @drv->port is %NULL.)
+ *
+ * Locking: none, Interrupts: enabled
+ */
+void uart_unregister_driver(struct uart_driver *drv)
+{
+	struct tty_driver *p = drv->tty_driver;
+	unsigned int i;
+
+	tty_unregister_driver(p);
+	tty_driver_kref_put(p);
+	for (i = 0; i < drv->nr; i++)
+		tty_port_destroy(&drv->state[i].port);
+	kfree(drv->state);
+	drv->state = NULL;
+	drv->tty_driver = NULL;
+}
+EXPORT_SYMBOL(uart_unregister_driver);
+
+struct tty_driver *uart_console_device(struct console *co, int *index)
+{
+	struct uart_driver *p = co->data;
+	*index = co->index;
+	return p->tty_driver;
+}
+EXPORT_SYMBOL_GPL(uart_console_device);
+
+static ssize_t uartclk_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return sprintf(buf, "%d\n", tmp.baud_base * 16);
+}
+
+static ssize_t type_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return sprintf(buf, "%d\n", tmp.type);
+}
+
+static ssize_t line_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return sprintf(buf, "%d\n", tmp.line);
+}
+
+static ssize_t port_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+	unsigned long ioaddr;
+
+	uart_get_info(port, &tmp);
+	ioaddr = tmp.port;
+	if (HIGH_BITS_OFFSET)
+		ioaddr |= (unsigned long)tmp.port_high << HIGH_BITS_OFFSET;
+	return sprintf(buf, "0x%lX\n", ioaddr);
+}
+
+static ssize_t irq_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return sprintf(buf, "%d\n", tmp.irq);
+}
+
+static ssize_t flags_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return sprintf(buf, "0x%X\n", tmp.flags);
+}
+
+static ssize_t xmit_fifo_size_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return sprintf(buf, "%d\n", tmp.xmit_fifo_size);
+}
+
+static ssize_t close_delay_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return sprintf(buf, "%d\n", tmp.close_delay);
+}
+
+static ssize_t closing_wait_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return sprintf(buf, "%d\n", tmp.closing_wait);
+}
+
+static ssize_t custom_divisor_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return sprintf(buf, "%d\n", tmp.custom_divisor);
+}
+
+static ssize_t io_type_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return sprintf(buf, "%d\n", tmp.io_type);
+}
+
+static ssize_t iomem_base_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return sprintf(buf, "0x%lX\n", (unsigned long)tmp.iomem_base);
+}
+
+static ssize_t iomem_reg_shift_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return sprintf(buf, "%d\n", tmp.iomem_reg_shift);
+}
+
+static ssize_t console_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct tty_port *port = dev_get_drvdata(dev);
+	struct uart_state *state = container_of(port, struct uart_state, port);
+	struct uart_port *uport;
+	bool console = false;
+
+	mutex_lock(&port->mutex);
+	uport = uart_port_check(state);
+	if (uport)
+		console = uart_console_registered(uport);
+	mutex_unlock(&port->mutex);
+
+	return sprintf(buf, "%c\n", console ? 'Y' : 'N');
+}
+
+static ssize_t console_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct tty_port *port = dev_get_drvdata(dev);
+	struct uart_state *state = container_of(port, struct uart_state, port);
+	struct uart_port *uport;
+	bool oldconsole, newconsole;
+	int ret;
+
+	ret = kstrtobool(buf, &newconsole);
+	if (ret)
+		return ret;
+
+	mutex_lock(&port->mutex);
+	uport = uart_port_check(state);
+	if (uport) {
+		oldconsole = uart_console_registered(uport);
+		if (oldconsole && !newconsole) {
+			ret = unregister_console(uport->cons);
+		} else if (!oldconsole && newconsole) {
+			if (uart_console(uport)) {
+				uport->console_reinit = 1;
+				register_console(uport->cons);
+			} else {
+				ret = -ENOENT;
+			}
+		}
+	} else {
+		ret = -ENXIO;
+	}
+	mutex_unlock(&port->mutex);
+
+	return ret < 0 ? ret : count;
+}
+
+static DEVICE_ATTR_RO(uartclk);
+static DEVICE_ATTR_RO(type);
+static DEVICE_ATTR_RO(line);
+static DEVICE_ATTR_RO(port);
+static DEVICE_ATTR_RO(irq);
+static DEVICE_ATTR_RO(flags);
+static DEVICE_ATTR_RO(xmit_fifo_size);
+static DEVICE_ATTR_RO(close_delay);
+static DEVICE_ATTR_RO(closing_wait);
+static DEVICE_ATTR_RO(custom_divisor);
+static DEVICE_ATTR_RO(io_type);
+static DEVICE_ATTR_RO(iomem_base);
+static DEVICE_ATTR_RO(iomem_reg_shift);
+static DEVICE_ATTR_RW(console);
+
+static struct attribute *tty_dev_attrs[] = {
+	&dev_attr_uartclk.attr,
+	&dev_attr_type.attr,
+	&dev_attr_line.attr,
+	&dev_attr_port.attr,
+	&dev_attr_irq.attr,
+	&dev_attr_flags.attr,
+	&dev_attr_xmit_fifo_size.attr,
+	&dev_attr_close_delay.attr,
+	&dev_attr_closing_wait.attr,
+	&dev_attr_custom_divisor.attr,
+	&dev_attr_io_type.attr,
+	&dev_attr_iomem_base.attr,
+	&dev_attr_iomem_reg_shift.attr,
+	&dev_attr_console.attr,
+	NULL
+};
+
+static const struct attribute_group tty_dev_attr_group = {
+	.attrs = tty_dev_attrs,
+};
+
+/**
+ * serial_core_add_one_port - attach a driver-defined port structure
+ * @drv: pointer to the uart low level driver structure for this port
+ * @uport: uart port structure to use for this port.
+ *
+ * Context: task context, might sleep
+ *
+ * This allows the driver @drv to register its own uart_port structure with the
+ * core driver. The main purpose is to allow the low level uart drivers to
+ * expand uart_port, rather than having yet more levels of structures.
+ * Caller must hold port_mutex.
+ */
+static int serial_core_add_one_port(struct uart_driver *drv, struct uart_port *uport)
+{
+	struct uart_state *state;
+	struct tty_port *port;
+	int ret = 0;
+	struct device *tty_dev;
+	int num_groups;
+
+	if (uport->line >= drv->nr)
+		return -EINVAL;
+
+	state = drv->state + uport->line;
+	port = &state->port;
+
+	mutex_lock(&port->mutex);
+	if (state->uart_port) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* Link the port to the driver state table and vice versa */
+	atomic_set(&state->refcount, 1);
+	init_waitqueue_head(&state->remove_wait);
+	state->uart_port = uport;
+	uport->state = state;
+
+	state->pm_state = UART_PM_STATE_UNDEFINED;
+	uport->cons = drv->cons;
+	uport->minor = drv->tty_driver->minor_start + uport->line;
+	uport->name = kasprintf(GFP_KERNEL, "%s%d", drv->dev_name,
+				drv->tty_driver->name_base + uport->line);
+	if (!uport->name) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/*
+	 * If this port is in use as a console then the spinlock is already
+	 * initialised.
+	 */
+	if (!uart_console_registered(uport))
+		uart_port_spin_lock_init(uport);
+
+	if (uport->cons && uport->dev)
+		of_console_check(uport->dev->of_node, uport->cons->name, uport->line);
+
+	tty_port_link_device(port, drv->tty_driver, uport->line);
+	uart_configure_port(drv, state, uport);
+
+	port->console = uart_console(uport);
+
+	num_groups = 2;
+	if (uport->attr_group)
+		num_groups++;
+
+	uport->tty_groups = kcalloc(num_groups, sizeof(*uport->tty_groups),
+				    GFP_KERNEL);
+	if (!uport->tty_groups) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	uport->tty_groups[0] = &tty_dev_attr_group;
+	if (uport->attr_group)
+		uport->tty_groups[1] = uport->attr_group;
+
+	/*
+	 * Register the port whether it's detected or not.  This allows
+	 * setserial to be used to alter this port's parameters.
+	 */
+	tty_dev = tty_port_register_device_attr_serdev(port, drv->tty_driver,
+			uport->line, uport->dev, port, uport->tty_groups);
+	if (!IS_ERR(tty_dev)) {
+		device_set_wakeup_capable(tty_dev, 1);
+	} else {
+		dev_err(uport->dev, "Cannot register tty device on line %d\n",
+		       uport->line);
+	}
+
+ out:
+	mutex_unlock(&port->mutex);
+
+	return ret;
+}
+
+/**
+ * serial_core_remove_one_port - detach a driver defined port structure
+ * @drv: pointer to the uart low level driver structure for this port
+ * @uport: uart port structure for this port
+ *
+ * Context: task context, might sleep
+ *
+ * This unhooks (and hangs up) the specified port structure from the core
+ * driver. No further calls will be made to the low-level code for this port.
+ * Caller must hold port_mutex.
+ */
+static void serial_core_remove_one_port(struct uart_driver *drv,
+					struct uart_port *uport)
+{
+	struct uart_state *state = drv->state + uport->line;
+	struct tty_port *port = &state->port;
+	struct uart_port *uart_port;
+	struct tty_struct *tty;
+
+	mutex_lock(&port->mutex);
+	uart_port = uart_port_check(state);
+	if (uart_port != uport)
+		dev_alert(uport->dev, "Removing wrong port: %p != %p\n",
+			  uart_port, uport);
+
+	if (!uart_port) {
+		mutex_unlock(&port->mutex);
+		return;
+	}
+	mutex_unlock(&port->mutex);
+
+	/*
+	 * Remove the devices from the tty layer
+	 */
+	tty_port_unregister_device(port, drv->tty_driver, uport->line);
+
+	tty = tty_port_tty_get(port);
+	if (tty) {
+		tty_vhangup(port->tty);
+		tty_kref_put(tty);
+	}
+
+	/*
+	 * If the port is used as a console, unregister it
+	 */
+	if (uart_console(uport))
+		unregister_console(uport->cons);
+
+	/*
+	 * Free the port IO and memory resources, if any.
+	 */
+	if (uport->type != PORT_UNKNOWN && uport->ops->release_port)
+		uport->ops->release_port(uport);
+	kfree(uport->tty_groups);
+	kfree(uport->name);
+
+	/*
+	 * Indicate that there isn't a port here anymore.
+	 */
+	uport->type = PORT_UNKNOWN;
+	uport->port_dev = NULL;
+
+	mutex_lock(&port->mutex);
+	WARN_ON(atomic_dec_return(&state->refcount) < 0);
+	wait_event(state->remove_wait, !atomic_read(&state->refcount));
+	state->uart_port = NULL;
+	mutex_unlock(&port->mutex);
+}
+
+/**
+ * uart_match_port - are the two ports equivalent?
+ * @port1: first port
+ * @port2: second port
+ *
+ * This utility function can be used to determine whether two uart_port
+ * structures describe the same port.
+ */
+bool uart_match_port(const struct uart_port *port1,
+		const struct uart_port *port2)
+{
+	if (port1->iotype != port2->iotype)
+		return false;
+
+	switch (port1->iotype) {
+	case UPIO_PORT:
+		return port1->iobase == port2->iobase;
+	case UPIO_HUB6:
+		return port1->iobase == port2->iobase &&
+		       port1->hub6   == port2->hub6;
+	case UPIO_MEM:
+	case UPIO_MEM16:
+	case UPIO_MEM32:
+	case UPIO_MEM32BE:
+	case UPIO_AU:
+	case UPIO_TSI:
+		return port1->mapbase == port2->mapbase;
+	}
+
+	return false;
+}
+EXPORT_SYMBOL(uart_match_port);
+
+static struct serial_ctrl_device *
+serial_core_get_ctrl_dev(struct serial_port_device *port_dev)
+{
+	struct device *dev = &port_dev->dev;
+
+	return to_serial_base_ctrl_device(dev->parent);
+}
+
+/*
+ * Find a registered serial core controller device if one exists. Returns
+ * the first device matching the ctrl_id. Caller must hold port_mutex.
+ */
+static struct serial_ctrl_device *serial_core_ctrl_find(struct uart_driver *drv,
+							struct device *phys_dev,
+							int ctrl_id)
+{
+	struct uart_state *state;
+	int i;
+
+	lockdep_assert_held(&port_mutex);
+
+	for (i = 0; i < drv->nr; i++) {
+		state = drv->state + i;
+		if (!state->uart_port || !state->uart_port->port_dev)
+			continue;
+
+		if (state->uart_port->dev == phys_dev &&
+		    state->uart_port->ctrl_id == ctrl_id)
+			return serial_core_get_ctrl_dev(state->uart_port->port_dev);
+	}
+
+	return NULL;
+}
+
+static struct serial_ctrl_device *serial_core_ctrl_device_add(struct uart_port *port)
+{
+	return serial_base_ctrl_add(port, port->dev);
+}
+
+static int serial_core_port_device_add(struct serial_ctrl_device *ctrl_dev,
+				       struct uart_port *port)
+{
+	struct serial_port_device *port_dev;
+
+	port_dev = serial_base_port_add(port, ctrl_dev);
+	if (IS_ERR(port_dev))
+		return PTR_ERR(port_dev);
+
+	port->port_dev = port_dev;
+
+	return 0;
+}
+
+/*
+ * Initialize a serial core port device, and a controller device if needed.
+ */
+int serial_core_register_port(struct uart_driver *drv, struct uart_port *port)
+{
+	struct serial_ctrl_device *ctrl_dev, *new_ctrl_dev = NULL;
+	int ret;
+
+	mutex_lock(&port_mutex);
+
+	/*
+	 * Prevent serial_port_runtime_resume() from trying to use the port
+	 * until serial_core_add_one_port() has completed
+	 */
+	port->flags |= UPF_DEAD;
+
+	/* Inititalize a serial core controller device if needed */
+	ctrl_dev = serial_core_ctrl_find(drv, port->dev, port->ctrl_id);
+	if (!ctrl_dev) {
+		new_ctrl_dev = serial_core_ctrl_device_add(port);
+		if (IS_ERR(new_ctrl_dev)) {
+			ret = PTR_ERR(new_ctrl_dev);
+			goto err_unlock;
+		}
+		ctrl_dev = new_ctrl_dev;
+	}
+
+	/*
+	 * Initialize a serial core port device. Tag the port dead to prevent
+	 * serial_port_runtime_resume() trying to do anything until port has
+	 * been registered. It gets cleared by serial_core_add_one_port().
+	 */
+	ret = serial_core_port_device_add(ctrl_dev, port);
+	if (ret)
+		goto err_unregister_ctrl_dev;
+
+	ret = serial_core_add_one_port(drv, port);
+	if (ret)
+		goto err_unregister_port_dev;
+
+	port->flags &= ~UPF_DEAD;
+
+	mutex_unlock(&port_mutex);
+
+	return 0;
+
+err_unregister_port_dev:
+	serial_base_port_device_remove(port->port_dev);
+
+err_unregister_ctrl_dev:
+	serial_base_ctrl_device_remove(new_ctrl_dev);
+
+err_unlock:
+	mutex_unlock(&port_mutex);
+
+	return ret;
+}
+
+/*
+ * Removes a serial core port device, and the related serial core controller
+ * device if the last instance.
+ */
+void serial_core_unregister_port(struct uart_driver *drv, struct uart_port *port)
+{
+	struct device *phys_dev = port->dev;
+	struct serial_port_device *port_dev = port->port_dev;
+	struct serial_ctrl_device *ctrl_dev = serial_core_get_ctrl_dev(port_dev);
+	int ctrl_id = port->ctrl_id;
+
+	mutex_lock(&port_mutex);
+
+	port->flags |= UPF_DEAD;
+
+	serial_core_remove_one_port(drv, port);
+
+	/* Note that struct uart_port *port is no longer valid at this point */
+	serial_base_port_device_remove(port_dev);
+
+	/* Drop the serial core controller device if no ports are using it */
+	if (!serial_core_ctrl_find(drv, phys_dev, ctrl_id))
+		serial_base_ctrl_device_remove(ctrl_dev);
+
+	mutex_unlock(&port_mutex);
+}
+
+/**
+ * uart_handle_dcd_change - handle a change of carrier detect state
+ * @uport: uart_port structure for the open port
+ * @active: new carrier detect status
+ *
+ * Caller must hold uport->lock.
+ */
+void uart_handle_dcd_change(struct uart_port *uport, bool active)
+{
+	struct tty_port *port = &uport->state->port;
+	struct tty_struct *tty = port->tty;
+	struct tty_ldisc *ld;
+
+	lockdep_assert_held_once(&uport->lock);
+
+	if (tty) {
+		ld = tty_ldisc_ref(tty);
+		if (ld) {
+			if (ld->ops->dcd_change)
+				ld->ops->dcd_change(tty, active);
+			tty_ldisc_deref(ld);
+		}
+	}
+
+	uport->icount.dcd++;
+
+	if (uart_dcd_enabled(uport)) {
+		if (active)
+			wake_up_interruptible(&port->open_wait);
+		else if (tty)
+			tty_hangup(tty);
+	}
+}
+EXPORT_SYMBOL_GPL(uart_handle_dcd_change);
+
+/**
+ * uart_handle_cts_change - handle a change of clear-to-send state
+ * @uport: uart_port structure for the open port
+ * @active: new clear-to-send status
+ *
+ * Caller must hold uport->lock.
+ */
+void uart_handle_cts_change(struct uart_port *uport, bool active)
+{
+	lockdep_assert_held_once(&uport->lock);
+
+	uport->icount.cts++;
+
+	if (uart_softcts_mode(uport)) {
+		if (uport->hw_stopped) {
+			if (active) {
+				uport->hw_stopped = false;
+				uport->ops->start_tx(uport);
+				uart_write_wakeup(uport);
+			}
+		} else {
+			if (!active) {
+				uport->hw_stopped = true;
+				uport->ops->stop_tx(uport);
+			}
+		}
+
+	}
+}
+EXPORT_SYMBOL_GPL(uart_handle_cts_change);
+
+/**
+ * uart_insert_char - push a char to the uart layer
+ *
+ * User is responsible to call tty_flip_buffer_push when they are done with
+ * insertion.
+ *
+ * @port: corresponding port
+ * @status: state of the serial port RX buffer (LSR for 8250)
+ * @overrun: mask of overrun bits in @status
+ * @ch: character to push
+ * @flag: flag for the character (see TTY_NORMAL and friends)
+ */
+void uart_insert_char(struct uart_port *port, unsigned int status,
+		      unsigned int overrun, u8 ch, u8 flag)
+{
+	struct tty_port *tport = &port->state->port;
+
+	if ((status & port->ignore_status_mask & ~overrun) == 0)
+		if (tty_insert_flip_char(tport, ch, flag) == 0)
+			++port->icount.buf_overrun;
+
+	/*
+	 * Overrun is special.  Since it's reported immediately,
+	 * it doesn't affect the current character.
+	 */
+	if (status & ~port->ignore_status_mask & overrun)
+		if (tty_insert_flip_char(tport, 0, TTY_OVERRUN) == 0)
+			++port->icount.buf_overrun;
+}
+EXPORT_SYMBOL_GPL(uart_insert_char);
+
+#ifdef CONFIG_MAGIC_SYSRQ_SERIAL
+static const u8 sysrq_toggle_seq[] = CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE;
+
+static void uart_sysrq_on(struct work_struct *w)
+{
+	int sysrq_toggle_seq_len = strlen(sysrq_toggle_seq);
+
+	sysrq_toggle_support(1);
+	pr_info("SysRq is enabled by magic sequence '%*pE' on serial\n",
+		sysrq_toggle_seq_len, sysrq_toggle_seq);
+}
+static DECLARE_WORK(sysrq_enable_work, uart_sysrq_on);
+
+/**
+ * uart_try_toggle_sysrq - Enables SysRq from serial line
+ * @port: uart_port structure where char(s) after BREAK met
+ * @ch: new character in the sequence after received BREAK
+ *
+ * Enables magic SysRq when the required sequence is met on port
+ * (see CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE).
+ *
+ * Returns: %false if @ch is out of enabling sequence and should be
+ * handled some other way, %true if @ch was consumed.
+ */
+bool uart_try_toggle_sysrq(struct uart_port *port, u8 ch)
+{
+	int sysrq_toggle_seq_len = strlen(sysrq_toggle_seq);
+
+	if (!sysrq_toggle_seq_len)
+		return false;
+
+	BUILD_BUG_ON(ARRAY_SIZE(sysrq_toggle_seq) >= U8_MAX);
+	if (sysrq_toggle_seq[port->sysrq_seq] != ch) {
+		port->sysrq_seq = 0;
+		return false;
+	}
+
+	if (++port->sysrq_seq < sysrq_toggle_seq_len) {
+		port->sysrq = jiffies + SYSRQ_TIMEOUT;
+		return true;
+	}
+
+	schedule_work(&sysrq_enable_work);
+
+	port->sysrq = 0;
+	return true;
+}
+EXPORT_SYMBOL_GPL(uart_try_toggle_sysrq);
+#endif
+
+/**
+ * uart_get_rs485_mode() - retrieve rs485 properties for given uart
+ * @port: uart device's target port
+ *
+ * This function implements the device tree binding described in
+ * Documentation/devicetree/bindings/serial/rs485.txt.
+ */
+int uart_get_rs485_mode(struct uart_port *port)
+{
+	struct serial_rs485 *rs485conf = &port->rs485;
+	struct device *dev = port->dev;
+	enum gpiod_flags dflags;
+	struct gpio_desc *desc;
+	u32 rs485_delay[2];
+	int ret;
+
+	if (!(port->rs485_supported.flags & SER_RS485_ENABLED))
+		return 0;
+
+	ret = device_property_read_u32_array(dev, "rs485-rts-delay",
+					     rs485_delay, 2);
+	if (!ret) {
+		rs485conf->delay_rts_before_send = rs485_delay[0];
+		rs485conf->delay_rts_after_send = rs485_delay[1];
+	} else {
+		rs485conf->delay_rts_before_send = 0;
+		rs485conf->delay_rts_after_send = 0;
+	}
+
+	uart_sanitize_serial_rs485_delays(port, rs485conf);
+
+	/*
+	 * Clear full-duplex and enabled flags, set RTS polarity to active high
+	 * to get to a defined state with the following properties:
+	 */
+	rs485conf->flags &= ~(SER_RS485_RX_DURING_TX | SER_RS485_ENABLED |
+			      SER_RS485_TERMINATE_BUS |
+			      SER_RS485_RTS_AFTER_SEND);
+	rs485conf->flags |= SER_RS485_RTS_ON_SEND;
+
+	if (device_property_read_bool(dev, "rs485-rx-during-tx"))
+		rs485conf->flags |= SER_RS485_RX_DURING_TX;
+
+	if (device_property_read_bool(dev, "linux,rs485-enabled-at-boot-time"))
+		rs485conf->flags |= SER_RS485_ENABLED;
+
+	if (device_property_read_bool(dev, "rs485-rts-active-low")) {
+		rs485conf->flags &= ~SER_RS485_RTS_ON_SEND;
+		rs485conf->flags |= SER_RS485_RTS_AFTER_SEND;
+	}
+
+	/*
+	 * Disabling termination by default is the safe choice:  Else if many
+	 * bus participants enable it, no communication is possible at all.
+	 * Works fine for short cables and users may enable for longer cables.
+	 */
+	desc = devm_gpiod_get_optional(dev, "rs485-term", GPIOD_OUT_LOW);
+	if (IS_ERR(desc))
+		return dev_err_probe(dev, PTR_ERR(desc), "Cannot get rs485-term-gpios\n");
+	port->rs485_term_gpio = desc;
+	if (port->rs485_term_gpio)
+		port->rs485_supported.flags |= SER_RS485_TERMINATE_BUS;
+
+	dflags = (rs485conf->flags & SER_RS485_RX_DURING_TX) ?
+		 GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
+	desc = devm_gpiod_get_optional(dev, "rs485-rx-during-tx", dflags);
+	if (IS_ERR(desc))
+		return dev_err_probe(dev, PTR_ERR(desc), "Cannot get rs485-rx-during-tx-gpios\n");
+	port->rs485_rx_during_tx_gpio = desc;
+	if (port->rs485_rx_during_tx_gpio)
+		port->rs485_supported.flags |= SER_RS485_RX_DURING_TX;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(uart_get_rs485_mode);
+
+/* Compile-time assertions for serial_rs485 layout */
+static_assert(offsetof(struct serial_rs485, padding) ==
+              (offsetof(struct serial_rs485, delay_rts_after_send) + sizeof(__u32)));
+static_assert(offsetof(struct serial_rs485, padding1) ==
+	      offsetof(struct serial_rs485, padding[1]));
+static_assert((offsetof(struct serial_rs485, padding[4]) + sizeof(__u32)) ==
+	      sizeof(struct serial_rs485));
+
+MODULE_DESCRIPTION("Serial driver core");
+MODULE_LICENSE("GPL");