Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1726 insertions, 0 deletions

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
new file mode 100644
index 0000000000..2e5e86a00a
--- /dev/null
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -0,0 +1,1726 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Cadence UART driver (found in Xilinx Zynq)
+ *
+ * Copyright (c) 2011 - 2014 Xilinx, Inc.
+ *
+ * This driver has originally been pushed by Xilinx using a Zynq-branding. This
+ * still shows in the naming of this file, the kconfig symbols and some symbols
+ * in the code.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/serial_core.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/iopoll.h>
+
+#define CDNS_UART_TTY_NAME	"ttyPS"
+#define CDNS_UART_NAME		"xuartps"
+#define CDNS_UART_MAJOR		0	/* use dynamic node allocation */
+#define CDNS_UART_MINOR		0	/* works best with devtmpfs */
+#define CDNS_UART_NR_PORTS	16
+#define CDNS_UART_FIFO_SIZE	64	/* FIFO size */
+#define CDNS_UART_REGISTER_SPACE	0x1000
+#define TX_TIMEOUT		500000
+
+/* Rx Trigger level */
+static int rx_trigger_level = 56;
+module_param(rx_trigger_level, uint, 0444);
+MODULE_PARM_DESC(rx_trigger_level, "Rx trigger level, 1-63 bytes");
+
+/* Rx Timeout */
+static int rx_timeout = 10;
+module_param(rx_timeout, uint, 0444);
+MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
+
+/* Register offsets for the UART. */
+#define CDNS_UART_CR		0x00  /* Control Register */
+#define CDNS_UART_MR		0x04  /* Mode Register */
+#define CDNS_UART_IER		0x08  /* Interrupt Enable */
+#define CDNS_UART_IDR		0x0C  /* Interrupt Disable */
+#define CDNS_UART_IMR		0x10  /* Interrupt Mask */
+#define CDNS_UART_ISR		0x14  /* Interrupt Status */
+#define CDNS_UART_BAUDGEN	0x18  /* Baud Rate Generator */
+#define CDNS_UART_RXTOUT	0x1C  /* RX Timeout */
+#define CDNS_UART_RXWM		0x20  /* RX FIFO Trigger Level */
+#define CDNS_UART_MODEMCR	0x24  /* Modem Control */
+#define CDNS_UART_MODEMSR	0x28  /* Modem Status */
+#define CDNS_UART_SR		0x2C  /* Channel Status */
+#define CDNS_UART_FIFO		0x30  /* FIFO */
+#define CDNS_UART_BAUDDIV	0x34  /* Baud Rate Divider */
+#define CDNS_UART_FLOWDEL	0x38  /* Flow Delay */
+#define CDNS_UART_IRRX_PWIDTH	0x3C  /* IR Min Received Pulse Width */
+#define CDNS_UART_IRTX_PWIDTH	0x40  /* IR Transmitted pulse Width */
+#define CDNS_UART_TXWM		0x44  /* TX FIFO Trigger Level */
+#define CDNS_UART_RXBS		0x48  /* RX FIFO byte status register */
+
+/* Control Register Bit Definitions */
+#define CDNS_UART_CR_STOPBRK	0x00000100  /* Stop TX break */
+#define CDNS_UART_CR_STARTBRK	0x00000080  /* Set TX break */
+#define CDNS_UART_CR_TX_DIS	0x00000020  /* TX disabled. */
+#define CDNS_UART_CR_TX_EN	0x00000010  /* TX enabled */
+#define CDNS_UART_CR_RX_DIS	0x00000008  /* RX disabled. */
+#define CDNS_UART_CR_RX_EN	0x00000004  /* RX enabled */
+#define CDNS_UART_CR_TXRST	0x00000002  /* TX logic reset */
+#define CDNS_UART_CR_RXRST	0x00000001  /* RX logic reset */
+#define CDNS_UART_CR_RST_TO	0x00000040  /* Restart Timeout Counter */
+#define CDNS_UART_RXBS_PARITY    0x00000001 /* Parity error status */
+#define CDNS_UART_RXBS_FRAMING   0x00000002 /* Framing error status */
+#define CDNS_UART_RXBS_BRK       0x00000004 /* Overrun error status */
+
+/*
+ * Mode Register:
+ * The mode register (MR) defines the mode of transfer as well as the data
+ * format. If this register is modified during transmission or reception,
+ * data validity cannot be guaranteed.
+ */
+#define CDNS_UART_MR_CLKSEL		0x00000001  /* Pre-scalar selection */
+#define CDNS_UART_MR_CHMODE_L_LOOP	0x00000200  /* Local loop back mode */
+#define CDNS_UART_MR_CHMODE_NORM	0x00000000  /* Normal mode */
+#define CDNS_UART_MR_CHMODE_MASK	0x00000300  /* Mask for mode bits */
+
+#define CDNS_UART_MR_STOPMODE_2_BIT	0x00000080  /* 2 stop bits */
+#define CDNS_UART_MR_STOPMODE_1_BIT	0x00000000  /* 1 stop bit */
+
+#define CDNS_UART_MR_PARITY_NONE	0x00000020  /* No parity mode */
+#define CDNS_UART_MR_PARITY_MARK	0x00000018  /* Mark parity mode */
+#define CDNS_UART_MR_PARITY_SPACE	0x00000010  /* Space parity mode */
+#define CDNS_UART_MR_PARITY_ODD		0x00000008  /* Odd parity mode */
+#define CDNS_UART_MR_PARITY_EVEN	0x00000000  /* Even parity mode */
+
+#define CDNS_UART_MR_CHARLEN_6_BIT	0x00000006  /* 6 bits data */
+#define CDNS_UART_MR_CHARLEN_7_BIT	0x00000004  /* 7 bits data */
+#define CDNS_UART_MR_CHARLEN_8_BIT	0x00000000  /* 8 bits data */
+
+/*
+ * Interrupt Registers:
+ * Interrupt control logic uses the interrupt enable register (IER) and the
+ * interrupt disable register (IDR) to set the value of the bits in the
+ * interrupt mask register (IMR). The IMR determines whether to pass an
+ * interrupt to the interrupt status register (ISR).
+ * Writing a 1 to IER Enables an interrupt, writing a 1 to IDR disables an
+ * interrupt. IMR and ISR are read only, and IER and IDR are write only.
+ * Reading either IER or IDR returns 0x00.
+ * All four registers have the same bit definitions.
+ */
+#define CDNS_UART_IXR_TOUT	0x00000100 /* RX Timeout error interrupt */
+#define CDNS_UART_IXR_PARITY	0x00000080 /* Parity error interrupt */
+#define CDNS_UART_IXR_FRAMING	0x00000040 /* Framing error interrupt */
+#define CDNS_UART_IXR_OVERRUN	0x00000020 /* Overrun error interrupt */
+#define CDNS_UART_IXR_TXFULL	0x00000010 /* TX FIFO Full interrupt */
+#define CDNS_UART_IXR_TXEMPTY	0x00000008 /* TX FIFO empty interrupt */
+#define CDNS_UART_ISR_RXEMPTY	0x00000002 /* RX FIFO empty interrupt */
+#define CDNS_UART_IXR_RXTRIG	0x00000001 /* RX FIFO trigger interrupt */
+#define CDNS_UART_IXR_RXFULL	0x00000004 /* RX FIFO full interrupt. */
+#define CDNS_UART_IXR_RXEMPTY	0x00000002 /* RX FIFO empty interrupt. */
+#define CDNS_UART_IXR_RXMASK	0x000021e7 /* Valid RX bit mask */
+
+	/*
+	 * Do not enable parity error interrupt for the following
+	 * reason: When parity error interrupt is enabled, each Rx
+	 * parity error always results in 2 events. The first one
+	 * being parity error interrupt and the second one with a
+	 * proper Rx interrupt with the incoming data.  Disabling
+	 * parity error interrupt ensures better handling of parity
+	 * error events. With this change, for a parity error case, we
+	 * get a Rx interrupt with parity error set in ISR register
+	 * and we still handle parity errors in the desired way.
+	 */
+
+#define CDNS_UART_RX_IRQS	(CDNS_UART_IXR_FRAMING | \
+				 CDNS_UART_IXR_OVERRUN | \
+				 CDNS_UART_IXR_RXTRIG |	 \
+				 CDNS_UART_IXR_TOUT)
+
+/* Goes in read_status_mask for break detection as the HW doesn't do it*/
+#define CDNS_UART_IXR_BRK	0x00002000
+
+#define CDNS_UART_RXBS_SUPPORT BIT(1)
+/*
+ * Modem Control register:
+ * The read/write Modem Control register controls the interface with the modem
+ * or data set, or a peripheral device emulating a modem.
+ */
+#define CDNS_UART_MODEMCR_FCM	0x00000020 /* Automatic flow control mode */
+#define CDNS_UART_MODEMCR_RTS	0x00000002 /* Request to send output control */
+#define CDNS_UART_MODEMCR_DTR	0x00000001 /* Data Terminal Ready */
+
+/*
+ * Modem Status register:
+ * The read/write Modem Status register reports the interface with the modem
+ * or data set, or a peripheral device emulating a modem.
+ */
+#define CDNS_UART_MODEMSR_DCD	BIT(7) /* Data Carrier Detect */
+#define CDNS_UART_MODEMSR_RI	BIT(6) /* Ting Indicator */
+#define CDNS_UART_MODEMSR_DSR	BIT(5) /* Data Set Ready */
+#define CDNS_UART_MODEMSR_CTS	BIT(4) /* Clear To Send */
+
+/*
+ * Channel Status Register:
+ * The channel status register (CSR) is provided to enable the control logic
+ * to monitor the status of bits in the channel interrupt status register,
+ * even if these are masked out by the interrupt mask register.
+ */
+#define CDNS_UART_SR_RXEMPTY	0x00000002 /* RX FIFO empty */
+#define CDNS_UART_SR_TXEMPTY	0x00000008 /* TX FIFO empty */
+#define CDNS_UART_SR_TXFULL	0x00000010 /* TX FIFO full */
+#define CDNS_UART_SR_RXTRIG	0x00000001 /* Rx Trigger */
+#define CDNS_UART_SR_TACTIVE	0x00000800 /* TX state machine active */
+
+/* baud dividers min/max values */
+#define CDNS_UART_BDIV_MIN	4
+#define CDNS_UART_BDIV_MAX	255
+#define CDNS_UART_CD_MAX	65535
+#define UART_AUTOSUSPEND_TIMEOUT	3000
+
+/**
+ * struct cdns_uart - device data
+ * @port:		Pointer to the UART port
+ * @uartclk:		Reference clock
+ * @pclk:		APB clock
+ * @cdns_uart_driver:	Pointer to UART driver
+ * @baud:		Current baud rate
+ * @clk_rate_change_nb:	Notifier block for clock changes
+ * @quirks:		Flags for RXBS support.
+ * @cts_override:	Modem control state override
+ */
+struct cdns_uart {
+	struct uart_port	*port;
+	struct clk		*uartclk;
+	struct clk		*pclk;
+	struct uart_driver	*cdns_uart_driver;
+	unsigned int		baud;
+	struct notifier_block	clk_rate_change_nb;
+	u32			quirks;
+	bool cts_override;
+};
+struct cdns_platform_data {
+	u32 quirks;
+};
+#define to_cdns_uart(_nb) container_of(_nb, struct cdns_uart, \
+		clk_rate_change_nb)
+
+/**
+ * cdns_uart_handle_rx - Handle the received bytes along with Rx errors.
+ * @dev_id: Id of the UART port
+ * @isrstatus: The interrupt status register value as read
+ * Return: None
+ */
+static void cdns_uart_handle_rx(void *dev_id, unsigned int isrstatus)
+{
+	struct uart_port *port = (struct uart_port *)dev_id;
+	struct cdns_uart *cdns_uart = port->private_data;
+	unsigned int data;
+	unsigned int rxbs_status = 0;
+	unsigned int status_mask;
+	unsigned int framerrprocessed = 0;
+	char status = TTY_NORMAL;
+	bool is_rxbs_support;
+
+	is_rxbs_support = cdns_uart->quirks & CDNS_UART_RXBS_SUPPORT;
+
+	while ((readl(port->membase + CDNS_UART_SR) &
+		CDNS_UART_SR_RXEMPTY) != CDNS_UART_SR_RXEMPTY) {
+		if (is_rxbs_support)
+			rxbs_status = readl(port->membase + CDNS_UART_RXBS);
+		data = readl(port->membase + CDNS_UART_FIFO);
+		port->icount.rx++;
+		/*
+		 * There is no hardware break detection in Zynq, so we interpret
+		 * framing error with all-zeros data as a break sequence.
+		 * Most of the time, there's another non-zero byte at the
+		 * end of the sequence.
+		 */
+		if (!is_rxbs_support && (isrstatus & CDNS_UART_IXR_FRAMING)) {
+			if (!data) {
+				port->read_status_mask |= CDNS_UART_IXR_BRK;
+				framerrprocessed = 1;
+				continue;
+			}
+		}
+		if (is_rxbs_support && (rxbs_status & CDNS_UART_RXBS_BRK)) {
+			port->icount.brk++;
+			status = TTY_BREAK;
+			if (uart_handle_break(port))
+				continue;
+		}
+
+		isrstatus &= port->read_status_mask;
+		isrstatus &= ~port->ignore_status_mask;
+		status_mask = port->read_status_mask;
+		status_mask &= ~port->ignore_status_mask;
+
+		if (data &&
+		    (port->read_status_mask & CDNS_UART_IXR_BRK)) {
+			port->read_status_mask &= ~CDNS_UART_IXR_BRK;
+			port->icount.brk++;
+			if (uart_handle_break(port))
+				continue;
+		}
+
+		if (uart_handle_sysrq_char(port, data))
+			continue;
+
+		if (is_rxbs_support) {
+			if ((rxbs_status & CDNS_UART_RXBS_PARITY)
+			    && (status_mask & CDNS_UART_IXR_PARITY)) {
+				port->icount.parity++;
+				status = TTY_PARITY;
+			}
+			if ((rxbs_status & CDNS_UART_RXBS_FRAMING)
+			    && (status_mask & CDNS_UART_IXR_PARITY)) {
+				port->icount.frame++;
+				status = TTY_FRAME;
+			}
+		} else {
+			if (isrstatus & CDNS_UART_IXR_PARITY) {
+				port->icount.parity++;
+				status = TTY_PARITY;
+			}
+			if ((isrstatus & CDNS_UART_IXR_FRAMING) &&
+			    !framerrprocessed) {
+				port->icount.frame++;
+				status = TTY_FRAME;
+			}
+		}
+		if (isrstatus & CDNS_UART_IXR_OVERRUN) {
+			port->icount.overrun++;
+			tty_insert_flip_char(&port->state->port, 0,
+					     TTY_OVERRUN);
+		}
+		tty_insert_flip_char(&port->state->port, data, status);
+		isrstatus = 0;
+	}
+
+	tty_flip_buffer_push(&port->state->port);
+}
+
+/**
+ * cdns_uart_handle_tx - Handle the bytes to be Txed.
+ * @dev_id: Id of the UART port
+ * Return: None
+ */
+static void cdns_uart_handle_tx(void *dev_id)
+{
+	struct uart_port *port = (struct uart_port *)dev_id;
+	struct circ_buf *xmit = &port->state->xmit;
+	unsigned int numbytes;
+
+	if (uart_circ_empty(xmit)) {
+		writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IDR);
+		return;
+	}
+
+	numbytes = port->fifosize;
+	while (numbytes && !uart_circ_empty(xmit) &&
+	       !(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXFULL)) {
+
+		writel(xmit->buf[xmit->tail], port->membase + CDNS_UART_FIFO);
+		uart_xmit_advance(port, 1);
+		numbytes--;
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+}
+
+/**
+ * cdns_uart_isr - Interrupt handler
+ * @irq: Irq number
+ * @dev_id: Id of the port
+ *
+ * Return: IRQHANDLED
+ */
+static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
+{
+	struct uart_port *port = (struct uart_port *)dev_id;
+	unsigned int isrstatus;
+
+	spin_lock(&port->lock);
+
+	/* Read the interrupt status register to determine which
+	 * interrupt(s) is/are active and clear them.
+	 */
+	isrstatus = readl(port->membase + CDNS_UART_ISR);
+	writel(isrstatus, port->membase + CDNS_UART_ISR);
+
+	if (isrstatus & CDNS_UART_IXR_TXEMPTY) {
+		cdns_uart_handle_tx(dev_id);
+		isrstatus &= ~CDNS_UART_IXR_TXEMPTY;
+	}
+
+	isrstatus &= port->read_status_mask;
+	isrstatus &= ~port->ignore_status_mask;
+	/*
+	 * Skip RX processing if RX is disabled as RXEMPTY will never be set
+	 * as read bytes will not be removed from the FIFO.
+	 */
+	if (isrstatus & CDNS_UART_IXR_RXMASK &&
+	    !(readl(port->membase + CDNS_UART_CR) & CDNS_UART_CR_RX_DIS))
+		cdns_uart_handle_rx(dev_id, isrstatus);
+
+	spin_unlock(&port->lock);
+	return IRQ_HANDLED;
+}
+
+/**
+ * cdns_uart_calc_baud_divs - Calculate baud rate divisors
+ * @clk: UART module input clock
+ * @baud: Desired baud rate
+ * @rbdiv: BDIV value (return value)
+ * @rcd: CD value (return value)
+ * @div8: Value for clk_sel bit in mod (return value)
+ * Return: baud rate, requested baud when possible, or actual baud when there
+ *	was too much error, zero if no valid divisors are found.
+ *
+ * Formula to obtain baud rate is
+ *	baud_tx/rx rate = clk/CD * (BDIV + 1)
+ *	input_clk = (Uart User Defined Clock or Apb Clock)
+ *		depends on UCLKEN in MR Reg
+ *	clk = input_clk or input_clk/8;
+ *		depends on CLKS in MR reg
+ *	CD and BDIV depends on values in
+ *			baud rate generate register
+ *			baud rate clock divisor register
+ */
+static unsigned int cdns_uart_calc_baud_divs(unsigned int clk,
+		unsigned int baud, u32 *rbdiv, u32 *rcd, int *div8)
+{
+	u32 cd, bdiv;
+	unsigned int calc_baud;
+	unsigned int bestbaud = 0;
+	unsigned int bauderror;
+	unsigned int besterror = ~0;
+
+	if (baud < clk / ((CDNS_UART_BDIV_MAX + 1) * CDNS_UART_CD_MAX)) {
+		*div8 = 1;
+		clk /= 8;
+	} else {
+		*div8 = 0;
+	}
+
+	for (bdiv = CDNS_UART_BDIV_MIN; bdiv <= CDNS_UART_BDIV_MAX; bdiv++) {
+		cd = DIV_ROUND_CLOSEST(clk, baud * (bdiv + 1));
+		if (cd < 1 || cd > CDNS_UART_CD_MAX)
+			continue;
+
+		calc_baud = clk / (cd * (bdiv + 1));
+
+		if (baud > calc_baud)
+			bauderror = baud - calc_baud;
+		else
+			bauderror = calc_baud - baud;
+
+		if (besterror > bauderror) {
+			*rbdiv = bdiv;
+			*rcd = cd;
+			bestbaud = calc_baud;
+			besterror = bauderror;
+		}
+	}
+	/* use the values when percent error is acceptable */
+	if (((besterror * 100) / baud) < 3)
+		bestbaud = baud;
+
+	return bestbaud;
+}
+
+/**
+ * cdns_uart_set_baud_rate - Calculate and set the baud rate
+ * @port: Handle to the uart port structure
+ * @baud: Baud rate to set
+ * Return: baud rate, requested baud when possible, or actual baud when there
+ *	   was too much error, zero if no valid divisors are found.
+ */
+static unsigned int cdns_uart_set_baud_rate(struct uart_port *port,
+		unsigned int baud)
+{
+	unsigned int calc_baud;
+	u32 cd = 0, bdiv = 0;
+	u32 mreg;
+	int div8;
+	struct cdns_uart *cdns_uart = port->private_data;
+
+	calc_baud = cdns_uart_calc_baud_divs(port->uartclk, baud, &bdiv, &cd,
+			&div8);
+
+	/* Write new divisors to hardware */
+	mreg = readl(port->membase + CDNS_UART_MR);
+	if (div8)
+		mreg |= CDNS_UART_MR_CLKSEL;
+	else
+		mreg &= ~CDNS_UART_MR_CLKSEL;
+	writel(mreg, port->membase + CDNS_UART_MR);
+	writel(cd, port->membase + CDNS_UART_BAUDGEN);
+	writel(bdiv, port->membase + CDNS_UART_BAUDDIV);
+	cdns_uart->baud = baud;
+
+	return calc_baud;
+}
+
+#ifdef CONFIG_COMMON_CLK
+/**
+ * cdns_uart_clk_notifier_cb - Clock notifier callback
+ * @nb:		Notifier block
+ * @event:	Notify event
+ * @data:	Notifier data
+ * Return:	NOTIFY_OK or NOTIFY_DONE on success, NOTIFY_BAD on error.
+ */
+static int cdns_uart_clk_notifier_cb(struct notifier_block *nb,
+		unsigned long event, void *data)
+{
+	u32 ctrl_reg;
+	struct uart_port *port;
+	int locked = 0;
+	struct clk_notifier_data *ndata = data;
+	struct cdns_uart *cdns_uart = to_cdns_uart(nb);
+	unsigned long flags;
+
+	port = cdns_uart->port;
+	if (port->suspended)
+		return NOTIFY_OK;
+
+	switch (event) {
+	case PRE_RATE_CHANGE:
+	{
+		u32 bdiv, cd;
+		int div8;
+
+		/*
+		 * Find out if current baud-rate can be achieved with new clock
+		 * frequency.
+		 */
+		if (!cdns_uart_calc_baud_divs(ndata->new_rate, cdns_uart->baud,
+					&bdiv, &cd, &div8)) {
+			dev_warn(port->dev, "clock rate change rejected\n");
+			return NOTIFY_BAD;
+		}
+
+		spin_lock_irqsave(&cdns_uart->port->lock, flags);
+
+		/* Disable the TX and RX to set baud rate */
+		ctrl_reg = readl(port->membase + CDNS_UART_CR);
+		ctrl_reg |= CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS;
+		writel(ctrl_reg, port->membase + CDNS_UART_CR);
+
+		spin_unlock_irqrestore(&cdns_uart->port->lock, flags);
+
+		return NOTIFY_OK;
+	}
+	case POST_RATE_CHANGE:
+		/*
+		 * Set clk dividers to generate correct baud with new clock
+		 * frequency.
+		 */
+
+		spin_lock_irqsave(&cdns_uart->port->lock, flags);
+
+		locked = 1;
+		port->uartclk = ndata->new_rate;
+
+		cdns_uart->baud = cdns_uart_set_baud_rate(cdns_uart->port,
+				cdns_uart->baud);
+		fallthrough;
+	case ABORT_RATE_CHANGE:
+		if (!locked)
+			spin_lock_irqsave(&cdns_uart->port->lock, flags);
+
+		/* Set TX/RX Reset */
+		ctrl_reg = readl(port->membase + CDNS_UART_CR);
+		ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
+		writel(ctrl_reg, port->membase + CDNS_UART_CR);
+
+		while (readl(port->membase + CDNS_UART_CR) &
+				(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
+			cpu_relax();
+
+		/*
+		 * Clear the RX disable and TX disable bits and then set the TX
+		 * enable bit and RX enable bit to enable the transmitter and
+		 * receiver.
+		 */
+		writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
+		ctrl_reg = readl(port->membase + CDNS_UART_CR);
+		ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
+		ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
+		writel(ctrl_reg, port->membase + CDNS_UART_CR);
+
+		spin_unlock_irqrestore(&cdns_uart->port->lock, flags);
+
+		return NOTIFY_OK;
+	default:
+		return NOTIFY_DONE;
+	}
+}
+#endif
+
+/**
+ * cdns_uart_start_tx -  Start transmitting bytes
+ * @port: Handle to the uart port structure
+ */
+static void cdns_uart_start_tx(struct uart_port *port)
+{
+	unsigned int status;
+
+	if (uart_tx_stopped(port))
+		return;
+
+	/*
+	 * Set the TX enable bit and clear the TX disable bit to enable the
+	 * transmitter.
+	 */
+	status = readl(port->membase + CDNS_UART_CR);
+	status &= ~CDNS_UART_CR_TX_DIS;
+	status |= CDNS_UART_CR_TX_EN;
+	writel(status, port->membase + CDNS_UART_CR);
+
+	if (uart_circ_empty(&port->state->xmit))
+		return;
+
+	writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_ISR);
+
+	cdns_uart_handle_tx(port);
+
+	/* Enable the TX Empty interrupt */
+	writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IER);
+}
+
+/**
+ * cdns_uart_stop_tx - Stop TX
+ * @port: Handle to the uart port structure
+ */
+static void cdns_uart_stop_tx(struct uart_port *port)
+{
+	unsigned int regval;
+
+	regval = readl(port->membase + CDNS_UART_CR);
+	regval |= CDNS_UART_CR_TX_DIS;
+	/* Disable the transmitter */
+	writel(regval, port->membase + CDNS_UART_CR);
+}
+
+/**
+ * cdns_uart_stop_rx - Stop RX
+ * @port: Handle to the uart port structure
+ */
+static void cdns_uart_stop_rx(struct uart_port *port)
+{
+	unsigned int regval;
+
+	/* Disable RX IRQs */
+	writel(CDNS_UART_RX_IRQS, port->membase + CDNS_UART_IDR);
+
+	/* Disable the receiver */
+	regval = readl(port->membase + CDNS_UART_CR);
+	regval |= CDNS_UART_CR_RX_DIS;
+	writel(regval, port->membase + CDNS_UART_CR);
+}
+
+/**
+ * cdns_uart_tx_empty -  Check whether TX is empty
+ * @port: Handle to the uart port structure
+ *
+ * Return: TIOCSER_TEMT on success, 0 otherwise
+ */
+static unsigned int cdns_uart_tx_empty(struct uart_port *port)
+{
+	unsigned int status;
+
+	status = readl(port->membase + CDNS_UART_SR) &
+		       (CDNS_UART_SR_TXEMPTY | CDNS_UART_SR_TACTIVE);
+	return (status == CDNS_UART_SR_TXEMPTY) ? TIOCSER_TEMT : 0;
+}
+
+/**
+ * cdns_uart_break_ctl - Based on the input ctl we have to start or stop
+ *			transmitting char breaks
+ * @port: Handle to the uart port structure
+ * @ctl: Value based on which start or stop decision is taken
+ */
+static void cdns_uart_break_ctl(struct uart_port *port, int ctl)
+{
+	unsigned int status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	status = readl(port->membase + CDNS_UART_CR);
+
+	if (ctl == -1)
+		writel(CDNS_UART_CR_STARTBRK | status,
+				port->membase + CDNS_UART_CR);
+	else {
+		if ((status & CDNS_UART_CR_STOPBRK) == 0)
+			writel(CDNS_UART_CR_STOPBRK | status,
+					port->membase + CDNS_UART_CR);
+	}
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/**
+ * cdns_uart_set_termios - termios operations, handling data length, parity,
+ *				stop bits, flow control, baud rate
+ * @port: Handle to the uart port structure
+ * @termios: Handle to the input termios structure
+ * @old: Values of the previously saved termios structure
+ */
+static void cdns_uart_set_termios(struct uart_port *port,
+				  struct ktermios *termios,
+				  const struct ktermios *old)
+{
+	u32 cval = 0;
+	unsigned int baud, minbaud, maxbaud;
+	unsigned long flags;
+	unsigned int ctrl_reg, mode_reg;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* Disable the TX and RX to set baud rate */
+	ctrl_reg = readl(port->membase + CDNS_UART_CR);
+	ctrl_reg |= CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS;
+	writel(ctrl_reg, port->membase + CDNS_UART_CR);
+
+	/*
+	 * Min baud rate = 6bps and Max Baud Rate is 10Mbps for 100Mhz clk
+	 * min and max baud should be calculated here based on port->uartclk.
+	 * this way we get a valid baud and can safely call set_baud()
+	 */
+	minbaud = port->uartclk /
+			((CDNS_UART_BDIV_MAX + 1) * CDNS_UART_CD_MAX * 8);
+	maxbaud = port->uartclk / (CDNS_UART_BDIV_MIN + 1);
+	baud = uart_get_baud_rate(port, termios, old, minbaud, maxbaud);
+	baud = cdns_uart_set_baud_rate(port, baud);
+	if (tty_termios_baud_rate(termios))
+		tty_termios_encode_baud_rate(termios, baud, baud);
+
+	/* Update the per-port timeout. */
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	/* Set TX/RX Reset */
+	ctrl_reg = readl(port->membase + CDNS_UART_CR);
+	ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
+	writel(ctrl_reg, port->membase + CDNS_UART_CR);
+
+	while (readl(port->membase + CDNS_UART_CR) &
+		(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
+		cpu_relax();
+
+	/*
+	 * Clear the RX disable and TX disable bits and then set the TX enable
+	 * bit and RX enable bit to enable the transmitter and receiver.
+	 */
+	ctrl_reg = readl(port->membase + CDNS_UART_CR);
+	ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
+	ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
+	writel(ctrl_reg, port->membase + CDNS_UART_CR);
+
+	writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
+
+	port->read_status_mask = CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_RXTRIG |
+			CDNS_UART_IXR_OVERRUN | CDNS_UART_IXR_TOUT;
+	port->ignore_status_mask = 0;
+
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= CDNS_UART_IXR_PARITY |
+		CDNS_UART_IXR_FRAMING;
+
+	if (termios->c_iflag & IGNPAR)
+		port->ignore_status_mask |= CDNS_UART_IXR_PARITY |
+			CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN;
+
+	/* ignore all characters if CREAD is not set */
+	if ((termios->c_cflag & CREAD) == 0)
+		port->ignore_status_mask |= CDNS_UART_IXR_RXTRIG |
+			CDNS_UART_IXR_TOUT | CDNS_UART_IXR_PARITY |
+			CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN;
+
+	mode_reg = readl(port->membase + CDNS_UART_MR);
+
+	/* Handling Data Size */
+	switch (termios->c_cflag & CSIZE) {
+	case CS6:
+		cval |= CDNS_UART_MR_CHARLEN_6_BIT;
+		break;
+	case CS7:
+		cval |= CDNS_UART_MR_CHARLEN_7_BIT;
+		break;
+	default:
+	case CS8:
+		cval |= CDNS_UART_MR_CHARLEN_8_BIT;
+		termios->c_cflag &= ~CSIZE;
+		termios->c_cflag |= CS8;
+		break;
+	}
+
+	/* Handling Parity and Stop Bits length */
+	if (termios->c_cflag & CSTOPB)
+		cval |= CDNS_UART_MR_STOPMODE_2_BIT; /* 2 STOP bits */
+	else
+		cval |= CDNS_UART_MR_STOPMODE_1_BIT; /* 1 STOP bit */
+
+	if (termios->c_cflag & PARENB) {
+		/* Mark or Space parity */
+		if (termios->c_cflag & CMSPAR) {
+			if (termios->c_cflag & PARODD)
+				cval |= CDNS_UART_MR_PARITY_MARK;
+			else
+				cval |= CDNS_UART_MR_PARITY_SPACE;
+		} else {
+			if (termios->c_cflag & PARODD)
+				cval |= CDNS_UART_MR_PARITY_ODD;
+			else
+				cval |= CDNS_UART_MR_PARITY_EVEN;
+		}
+	} else {
+		cval |= CDNS_UART_MR_PARITY_NONE;
+	}
+	cval |= mode_reg & 1;
+	writel(cval, port->membase + CDNS_UART_MR);
+
+	cval = readl(port->membase + CDNS_UART_MODEMCR);
+	if (termios->c_cflag & CRTSCTS)
+		cval |= CDNS_UART_MODEMCR_FCM;
+	else
+		cval &= ~CDNS_UART_MODEMCR_FCM;
+	writel(cval, port->membase + CDNS_UART_MODEMCR);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/**
+ * cdns_uart_startup - Called when an application opens a cdns_uart port
+ * @port: Handle to the uart port structure
+ *
+ * Return: 0 on success, negative errno otherwise
+ */
+static int cdns_uart_startup(struct uart_port *port)
+{
+	struct cdns_uart *cdns_uart = port->private_data;
+	bool is_brk_support;
+	int ret;
+	unsigned long flags;
+	unsigned int status = 0;
+
+	is_brk_support = cdns_uart->quirks & CDNS_UART_RXBS_SUPPORT;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* Disable the TX and RX */
+	writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
+			port->membase + CDNS_UART_CR);
+
+	/* Set the Control Register with TX/RX Enable, TX/RX Reset,
+	 * no break chars.
+	 */
+	writel(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST,
+			port->membase + CDNS_UART_CR);
+
+	while (readl(port->membase + CDNS_UART_CR) &
+		(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
+		cpu_relax();
+
+	/*
+	 * Clear the RX disable bit and then set the RX enable bit to enable
+	 * the receiver.
+	 */
+	status = readl(port->membase + CDNS_UART_CR);
+	status &= ~CDNS_UART_CR_RX_DIS;
+	status |= CDNS_UART_CR_RX_EN;
+	writel(status, port->membase + CDNS_UART_CR);
+
+	/* Set the Mode Register with normal mode,8 data bits,1 stop bit,
+	 * no parity.
+	 */
+	writel(CDNS_UART_MR_CHMODE_NORM | CDNS_UART_MR_STOPMODE_1_BIT
+		| CDNS_UART_MR_PARITY_NONE | CDNS_UART_MR_CHARLEN_8_BIT,
+		port->membase + CDNS_UART_MR);
+
+	/*
+	 * Set the RX FIFO Trigger level to use most of the FIFO, but it
+	 * can be tuned with a module parameter
+	 */
+	writel(rx_trigger_level, port->membase + CDNS_UART_RXWM);
+
+	/*
+	 * Receive Timeout register is enabled but it
+	 * can be tuned with a module parameter
+	 */
+	writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
+
+	/* Clear out any pending interrupts before enabling them */
+	writel(readl(port->membase + CDNS_UART_ISR),
+			port->membase + CDNS_UART_ISR);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	ret = request_irq(port->irq, cdns_uart_isr, 0, CDNS_UART_NAME, port);
+	if (ret) {
+		dev_err(port->dev, "request_irq '%d' failed with %d\n",
+			port->irq, ret);
+		return ret;
+	}
+
+	/* Set the Interrupt Registers with desired interrupts */
+	if (is_brk_support)
+		writel(CDNS_UART_RX_IRQS | CDNS_UART_IXR_BRK,
+					port->membase + CDNS_UART_IER);
+	else
+		writel(CDNS_UART_RX_IRQS, port->membase + CDNS_UART_IER);
+
+	return 0;
+}
+
+/**
+ * cdns_uart_shutdown - Called when an application closes a cdns_uart port
+ * @port: Handle to the uart port structure
+ */
+static void cdns_uart_shutdown(struct uart_port *port)
+{
+	int status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* Disable interrupts */
+	status = readl(port->membase + CDNS_UART_IMR);
+	writel(status, port->membase + CDNS_UART_IDR);
+	writel(0xffffffff, port->membase + CDNS_UART_ISR);
+
+	/* Disable the TX and RX */
+	writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
+			port->membase + CDNS_UART_CR);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	free_irq(port->irq, port);
+}
+
+/**
+ * cdns_uart_type - Set UART type to cdns_uart port
+ * @port: Handle to the uart port structure
+ *
+ * Return: string on success, NULL otherwise
+ */
+static const char *cdns_uart_type(struct uart_port *port)
+{
+	return port->type == PORT_XUARTPS ? CDNS_UART_NAME : NULL;
+}
+
+/**
+ * cdns_uart_verify_port - Verify the port params
+ * @port: Handle to the uart port structure
+ * @ser: Handle to the structure whose members are compared
+ *
+ * Return: 0 on success, negative errno otherwise.
+ */
+static int cdns_uart_verify_port(struct uart_port *port,
+					struct serial_struct *ser)
+{
+	if (ser->type != PORT_UNKNOWN && ser->type != PORT_XUARTPS)
+		return -EINVAL;
+	if (port->irq != ser->irq)
+		return -EINVAL;
+	if (ser->io_type != UPIO_MEM)
+		return -EINVAL;
+	if (port->iobase != ser->port)
+		return -EINVAL;
+	if (ser->hub6 != 0)
+		return -EINVAL;
+	return 0;
+}
+
+/**
+ * cdns_uart_request_port - Claim the memory region attached to cdns_uart port,
+ *				called when the driver adds a cdns_uart port via
+ *				uart_add_one_port()
+ * @port: Handle to the uart port structure
+ *
+ * Return: 0 on success, negative errno otherwise.
+ */
+static int cdns_uart_request_port(struct uart_port *port)
+{
+	if (!request_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE,
+					 CDNS_UART_NAME)) {
+		return -ENOMEM;
+	}
+
+	port->membase = ioremap(port->mapbase, CDNS_UART_REGISTER_SPACE);
+	if (!port->membase) {
+		dev_err(port->dev, "Unable to map registers\n");
+		release_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE);
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+/**
+ * cdns_uart_release_port - Release UART port
+ * @port: Handle to the uart port structure
+ *
+ * Release the memory region attached to a cdns_uart port. Called when the
+ * driver removes a cdns_uart port via uart_remove_one_port().
+ */
+static void cdns_uart_release_port(struct uart_port *port)
+{
+	release_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE);
+	iounmap(port->membase);
+	port->membase = NULL;
+}
+
+/**
+ * cdns_uart_config_port - Configure UART port
+ * @port: Handle to the uart port structure
+ * @flags: If any
+ */
+static void cdns_uart_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE && cdns_uart_request_port(port) == 0)
+		port->type = PORT_XUARTPS;
+}
+
+/**
+ * cdns_uart_get_mctrl - Get the modem control state
+ * @port: Handle to the uart port structure
+ *
+ * Return: the modem control state
+ */
+static unsigned int cdns_uart_get_mctrl(struct uart_port *port)
+{
+	u32 val;
+	unsigned int mctrl = 0;
+	struct cdns_uart *cdns_uart_data = port->private_data;
+
+	if (cdns_uart_data->cts_override)
+		return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+
+	val = readl(port->membase + CDNS_UART_MODEMSR);
+	if (val & CDNS_UART_MODEMSR_CTS)
+		mctrl |= TIOCM_CTS;
+	if (val & CDNS_UART_MODEMSR_DSR)
+		mctrl |= TIOCM_DSR;
+	if (val & CDNS_UART_MODEMSR_RI)
+		mctrl |= TIOCM_RNG;
+	if (val & CDNS_UART_MODEMSR_DCD)
+		mctrl |= TIOCM_CAR;
+
+	return mctrl;
+}
+
+static void cdns_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	u32 val;
+	u32 mode_reg;
+	struct cdns_uart *cdns_uart_data = port->private_data;
+
+	if (cdns_uart_data->cts_override)
+		return;
+
+	val = readl(port->membase + CDNS_UART_MODEMCR);
+	mode_reg = readl(port->membase + CDNS_UART_MR);
+
+	val &= ~(CDNS_UART_MODEMCR_RTS | CDNS_UART_MODEMCR_DTR);
+	mode_reg &= ~CDNS_UART_MR_CHMODE_MASK;
+
+	if (mctrl & TIOCM_RTS)
+		val |= CDNS_UART_MODEMCR_RTS;
+	if (mctrl & TIOCM_DTR)
+		val |= CDNS_UART_MODEMCR_DTR;
+	if (mctrl & TIOCM_LOOP)
+		mode_reg |= CDNS_UART_MR_CHMODE_L_LOOP;
+	else
+		mode_reg |= CDNS_UART_MR_CHMODE_NORM;
+
+	writel(val, port->membase + CDNS_UART_MODEMCR);
+	writel(mode_reg, port->membase + CDNS_UART_MR);
+}
+
+#ifdef CONFIG_CONSOLE_POLL
+static int cdns_uart_poll_get_char(struct uart_port *port)
+{
+	int c;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* Check if FIFO is empty */
+	if (readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_RXEMPTY)
+		c = NO_POLL_CHAR;
+	else /* Read a character */
+		c = (unsigned char) readl(port->membase + CDNS_UART_FIFO);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	return c;
+}
+
+static void cdns_uart_poll_put_char(struct uart_port *port, unsigned char c)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* Wait until FIFO is empty */
+	while (!(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXEMPTY))
+		cpu_relax();
+
+	/* Write a character */
+	writel(c, port->membase + CDNS_UART_FIFO);
+
+	/* Wait until FIFO is empty */
+	while (!(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXEMPTY))
+		cpu_relax();
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+#endif
+
+static void cdns_uart_pm(struct uart_port *port, unsigned int state,
+		   unsigned int oldstate)
+{
+	switch (state) {
+	case UART_PM_STATE_OFF:
+		pm_runtime_mark_last_busy(port->dev);
+		pm_runtime_put_autosuspend(port->dev);
+		break;
+	default:
+		pm_runtime_get_sync(port->dev);
+		break;
+	}
+}
+
+static const struct uart_ops cdns_uart_ops = {
+	.set_mctrl	= cdns_uart_set_mctrl,
+	.get_mctrl	= cdns_uart_get_mctrl,
+	.start_tx	= cdns_uart_start_tx,
+	.stop_tx	= cdns_uart_stop_tx,
+	.stop_rx	= cdns_uart_stop_rx,
+	.tx_empty	= cdns_uart_tx_empty,
+	.break_ctl	= cdns_uart_break_ctl,
+	.set_termios	= cdns_uart_set_termios,
+	.startup	= cdns_uart_startup,
+	.shutdown	= cdns_uart_shutdown,
+	.pm		= cdns_uart_pm,
+	.type		= cdns_uart_type,
+	.verify_port	= cdns_uart_verify_port,
+	.request_port	= cdns_uart_request_port,
+	.release_port	= cdns_uart_release_port,
+	.config_port	= cdns_uart_config_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char	= cdns_uart_poll_get_char,
+	.poll_put_char	= cdns_uart_poll_put_char,
+#endif
+};
+
+static struct uart_driver cdns_uart_uart_driver;
+
+#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
+/**
+ * cdns_uart_console_putchar - write the character to the FIFO buffer
+ * @port: Handle to the uart port structure
+ * @ch: Character to be written
+ */
+static void cdns_uart_console_putchar(struct uart_port *port, unsigned char ch)
+{
+	unsigned int ctrl_reg;
+	unsigned long timeout;
+
+	timeout = jiffies + msecs_to_jiffies(1000);
+	while (1) {
+		ctrl_reg = readl(port->membase + CDNS_UART_CR);
+		if (!(ctrl_reg & CDNS_UART_CR_TX_DIS))
+			break;
+		if (time_after(jiffies, timeout)) {
+			dev_warn(port->dev,
+				 "timeout waiting for Enable\n");
+			return;
+		}
+		cpu_relax();
+	}
+
+	timeout = jiffies + msecs_to_jiffies(1000);
+	while (1) {
+		ctrl_reg = readl(port->membase + CDNS_UART_SR);
+
+		if (!(ctrl_reg & CDNS_UART_SR_TXFULL))
+			break;
+		if (time_after(jiffies, timeout)) {
+			dev_warn(port->dev,
+				 "timeout waiting for TX fifo\n");
+			return;
+		}
+		cpu_relax();
+	}
+	writel(ch, port->membase + CDNS_UART_FIFO);
+}
+
+static void cdns_early_write(struct console *con, const char *s,
+				    unsigned int n)
+{
+	struct earlycon_device *dev = con->data;
+
+	uart_console_write(&dev->port, s, n, cdns_uart_console_putchar);
+}
+
+static int __init cdns_early_console_setup(struct earlycon_device *device,
+					   const char *opt)
+{
+	struct uart_port *port = &device->port;
+
+	if (!port->membase)
+		return -ENODEV;
+
+	/* initialise control register */
+	writel(CDNS_UART_CR_TX_EN|CDNS_UART_CR_TXRST|CDNS_UART_CR_RXRST,
+	       port->membase + CDNS_UART_CR);
+
+	/* only set baud if specified on command line - otherwise
+	 * assume it has been initialized by a boot loader.
+	 */
+	if (port->uartclk && device->baud) {
+		u32 cd = 0, bdiv = 0;
+		u32 mr;
+		int div8;
+
+		cdns_uart_calc_baud_divs(port->uartclk, device->baud,
+					 &bdiv, &cd, &div8);
+		mr = CDNS_UART_MR_PARITY_NONE;
+		if (div8)
+			mr |= CDNS_UART_MR_CLKSEL;
+
+		writel(mr,   port->membase + CDNS_UART_MR);
+		writel(cd,   port->membase + CDNS_UART_BAUDGEN);
+		writel(bdiv, port->membase + CDNS_UART_BAUDDIV);
+	}
+
+	device->con->write = cdns_early_write;
+
+	return 0;
+}
+OF_EARLYCON_DECLARE(cdns, "xlnx,xuartps", cdns_early_console_setup);
+OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p8", cdns_early_console_setup);
+OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p12", cdns_early_console_setup);
+OF_EARLYCON_DECLARE(cdns, "xlnx,zynqmp-uart", cdns_early_console_setup);
+
+
+/* Static pointer to console port */
+static struct uart_port *console_port;
+
+/**
+ * cdns_uart_console_write - perform write operation
+ * @co: Console handle
+ * @s: Pointer to character array
+ * @count: No of characters
+ */
+static void cdns_uart_console_write(struct console *co, const char *s,
+				unsigned int count)
+{
+	struct uart_port *port = console_port;
+	unsigned long flags;
+	unsigned int imr, ctrl;
+	int locked = 1;
+
+	if (port->sysrq)
+		locked = 0;
+	else if (oops_in_progress)
+		locked = spin_trylock_irqsave(&port->lock, flags);
+	else
+		spin_lock_irqsave(&port->lock, flags);
+
+	/* save and disable interrupt */
+	imr = readl(port->membase + CDNS_UART_IMR);
+	writel(imr, port->membase + CDNS_UART_IDR);
+
+	/*
+	 * Make sure that the tx part is enabled. Set the TX enable bit and
+	 * clear the TX disable bit to enable the transmitter.
+	 */
+	ctrl = readl(port->membase + CDNS_UART_CR);
+	ctrl &= ~CDNS_UART_CR_TX_DIS;
+	ctrl |= CDNS_UART_CR_TX_EN;
+	writel(ctrl, port->membase + CDNS_UART_CR);
+
+	uart_console_write(port, s, count, cdns_uart_console_putchar);
+	while (cdns_uart_tx_empty(port) != TIOCSER_TEMT)
+		cpu_relax();
+
+	/* restore interrupt state */
+	writel(imr, port->membase + CDNS_UART_IER);
+
+	if (locked)
+		spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/**
+ * cdns_uart_console_setup - Initialize the uart to default config
+ * @co: Console handle
+ * @options: Initial settings of uart
+ *
+ * Return: 0 on success, negative errno otherwise.
+ */
+static int cdns_uart_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port = console_port;
+
+	int baud = 9600;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+	unsigned long time_out;
+
+	if (!port->membase) {
+		pr_debug("console on " CDNS_UART_TTY_NAME "%i not present\n",
+			 co->index);
+		return -ENODEV;
+	}
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	/* Wait for tx_empty before setting up the console */
+	time_out = jiffies + usecs_to_jiffies(TX_TIMEOUT);
+
+	while (time_before(jiffies, time_out) &&
+	       cdns_uart_tx_empty(port) != TIOCSER_TEMT)
+		cpu_relax();
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct console cdns_uart_console = {
+	.name	= CDNS_UART_TTY_NAME,
+	.write	= cdns_uart_console_write,
+	.device	= uart_console_device,
+	.setup	= cdns_uart_console_setup,
+	.flags	= CON_PRINTBUFFER,
+	.index	= -1, /* Specified on the cmdline (e.g. console=ttyPS ) */
+	.data	= &cdns_uart_uart_driver,
+};
+#endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * cdns_uart_suspend - suspend event
+ * @device: Pointer to the device structure
+ *
+ * Return: 0
+ */
+static int cdns_uart_suspend(struct device *device)
+{
+	struct uart_port *port = dev_get_drvdata(device);
+	struct cdns_uart *cdns_uart = port->private_data;
+	int may_wake;
+
+	may_wake = device_may_wakeup(device);
+
+	if (console_suspend_enabled && uart_console(port) && may_wake) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&port->lock, flags);
+		/* Empty the receive FIFO 1st before making changes */
+		while (!(readl(port->membase + CDNS_UART_SR) &
+					CDNS_UART_SR_RXEMPTY))
+			readl(port->membase + CDNS_UART_FIFO);
+		/* set RX trigger level to 1 */
+		writel(1, port->membase + CDNS_UART_RXWM);
+		/* disable RX timeout interrups */
+		writel(CDNS_UART_IXR_TOUT, port->membase + CDNS_UART_IDR);
+		spin_unlock_irqrestore(&port->lock, flags);
+	}
+
+	/*
+	 * Call the API provided in serial_core.c file which handles
+	 * the suspend.
+	 */
+	return uart_suspend_port(cdns_uart->cdns_uart_driver, port);
+}
+
+/**
+ * cdns_uart_resume - Resume after a previous suspend
+ * @device: Pointer to the device structure
+ *
+ * Return: 0
+ */
+static int cdns_uart_resume(struct device *device)
+{
+	struct uart_port *port = dev_get_drvdata(device);
+	struct cdns_uart *cdns_uart = port->private_data;
+	unsigned long flags;
+	u32 ctrl_reg;
+	int may_wake;
+	int ret;
+
+	may_wake = device_may_wakeup(device);
+
+	if (console_suspend_enabled && uart_console(port) && !may_wake) {
+		ret = clk_enable(cdns_uart->pclk);
+		if (ret)
+			return ret;
+
+		ret = clk_enable(cdns_uart->uartclk);
+		if (ret) {
+			clk_disable(cdns_uart->pclk);
+			return ret;
+		}
+
+		spin_lock_irqsave(&port->lock, flags);
+
+		/* Set TX/RX Reset */
+		ctrl_reg = readl(port->membase + CDNS_UART_CR);
+		ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
+		writel(ctrl_reg, port->membase + CDNS_UART_CR);
+		while (readl(port->membase + CDNS_UART_CR) &
+				(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
+			cpu_relax();
+
+		/* restore rx timeout value */
+		writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
+		/* Enable Tx/Rx */
+		ctrl_reg = readl(port->membase + CDNS_UART_CR);
+		ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
+		ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
+		writel(ctrl_reg, port->membase + CDNS_UART_CR);
+
+		clk_disable(cdns_uart->uartclk);
+		clk_disable(cdns_uart->pclk);
+		spin_unlock_irqrestore(&port->lock, flags);
+	} else {
+		spin_lock_irqsave(&port->lock, flags);
+		/* restore original rx trigger level */
+		writel(rx_trigger_level, port->membase + CDNS_UART_RXWM);
+		/* enable RX timeout interrupt */
+		writel(CDNS_UART_IXR_TOUT, port->membase + CDNS_UART_IER);
+		spin_unlock_irqrestore(&port->lock, flags);
+	}
+
+	return uart_resume_port(cdns_uart->cdns_uart_driver, port);
+}
+#endif /* ! CONFIG_PM_SLEEP */
+static int __maybe_unused cdns_runtime_suspend(struct device *dev)
+{
+	struct uart_port *port = dev_get_drvdata(dev);
+	struct cdns_uart *cdns_uart = port->private_data;
+
+	clk_disable(cdns_uart->uartclk);
+	clk_disable(cdns_uart->pclk);
+	return 0;
+};
+
+static int __maybe_unused cdns_runtime_resume(struct device *dev)
+{
+	struct uart_port *port = dev_get_drvdata(dev);
+	struct cdns_uart *cdns_uart = port->private_data;
+	int ret;
+
+	ret = clk_enable(cdns_uart->pclk);
+	if (ret)
+		return ret;
+
+	ret = clk_enable(cdns_uart->uartclk);
+	if (ret) {
+		clk_disable(cdns_uart->pclk);
+		return ret;
+	}
+	return 0;
+};
+
+static const struct dev_pm_ops cdns_uart_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(cdns_uart_suspend, cdns_uart_resume)
+	SET_RUNTIME_PM_OPS(cdns_runtime_suspend,
+			   cdns_runtime_resume, NULL)
+};
+
+static const struct cdns_platform_data zynqmp_uart_def = {
+				.quirks = CDNS_UART_RXBS_SUPPORT, };
+
+/* Match table for of_platform binding */
+static const struct of_device_id cdns_uart_of_match[] = {
+	{ .compatible = "xlnx,xuartps", },
+	{ .compatible = "cdns,uart-r1p8", },
+	{ .compatible = "cdns,uart-r1p12", .data = &zynqmp_uart_def },
+	{ .compatible = "xlnx,zynqmp-uart", .data = &zynqmp_uart_def },
+	{}
+};
+MODULE_DEVICE_TABLE(of, cdns_uart_of_match);
+
+/* Temporary variable for storing number of instances */
+static int instances;
+
+/**
+ * cdns_uart_probe - Platform driver probe
+ * @pdev: Pointer to the platform device structure
+ *
+ * Return: 0 on success, negative errno otherwise
+ */
+static int cdns_uart_probe(struct platform_device *pdev)
+{
+	int rc, id, irq;
+	struct uart_port *port;
+	struct resource *res;
+	struct cdns_uart *cdns_uart_data;
+	const struct of_device_id *match;
+
+	cdns_uart_data = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_data),
+			GFP_KERNEL);
+	if (!cdns_uart_data)
+		return -ENOMEM;
+	port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
+	if (!port)
+		return -ENOMEM;
+
+	/* Look for a serialN alias */
+	id = of_alias_get_id(pdev->dev.of_node, "serial");
+	if (id < 0)
+		id = 0;
+
+	if (id >= CDNS_UART_NR_PORTS) {
+		dev_err(&pdev->dev, "Cannot get uart_port structure\n");
+		return -ENODEV;
+	}
+
+	if (!cdns_uart_uart_driver.state) {
+		cdns_uart_uart_driver.owner = THIS_MODULE;
+		cdns_uart_uart_driver.driver_name = CDNS_UART_NAME;
+		cdns_uart_uart_driver.dev_name = CDNS_UART_TTY_NAME;
+		cdns_uart_uart_driver.major = CDNS_UART_MAJOR;
+		cdns_uart_uart_driver.minor = CDNS_UART_MINOR;
+		cdns_uart_uart_driver.nr = CDNS_UART_NR_PORTS;
+#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
+		cdns_uart_uart_driver.cons = &cdns_uart_console;
+#endif
+
+		rc = uart_register_driver(&cdns_uart_uart_driver);
+		if (rc < 0) {
+			dev_err(&pdev->dev, "Failed to register driver\n");
+			return rc;
+		}
+	}
+
+	cdns_uart_data->cdns_uart_driver = &cdns_uart_uart_driver;
+
+	match = of_match_node(cdns_uart_of_match, pdev->dev.of_node);
+	if (match && match->data) {
+		const struct cdns_platform_data *data = match->data;
+
+		cdns_uart_data->quirks = data->quirks;
+	}
+
+	cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "pclk");
+	if (PTR_ERR(cdns_uart_data->pclk) == -EPROBE_DEFER) {
+		rc = PTR_ERR(cdns_uart_data->pclk);
+		goto err_out_unregister_driver;
+	}
+
+	if (IS_ERR(cdns_uart_data->pclk)) {
+		cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "aper_clk");
+		if (IS_ERR(cdns_uart_data->pclk)) {
+			rc = PTR_ERR(cdns_uart_data->pclk);
+			goto err_out_unregister_driver;
+		}
+		dev_err(&pdev->dev, "clock name 'aper_clk' is deprecated.\n");
+	}
+
+	cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "uart_clk");
+	if (PTR_ERR(cdns_uart_data->uartclk) == -EPROBE_DEFER) {
+		rc = PTR_ERR(cdns_uart_data->uartclk);
+		goto err_out_unregister_driver;
+	}
+
+	if (IS_ERR(cdns_uart_data->uartclk)) {
+		cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "ref_clk");
+		if (IS_ERR(cdns_uart_data->uartclk)) {
+			rc = PTR_ERR(cdns_uart_data->uartclk);
+			goto err_out_unregister_driver;
+		}
+		dev_err(&pdev->dev, "clock name 'ref_clk' is deprecated.\n");
+	}
+
+	rc = clk_prepare_enable(cdns_uart_data->pclk);
+	if (rc) {
+		dev_err(&pdev->dev, "Unable to enable pclk clock.\n");
+		goto err_out_unregister_driver;
+	}
+	rc = clk_prepare_enable(cdns_uart_data->uartclk);
+	if (rc) {
+		dev_err(&pdev->dev, "Unable to enable device clock.\n");
+		goto err_out_clk_dis_pclk;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		rc = -ENODEV;
+		goto err_out_clk_disable;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		rc = irq;
+		goto err_out_clk_disable;
+	}
+
+#ifdef CONFIG_COMMON_CLK
+	cdns_uart_data->clk_rate_change_nb.notifier_call =
+			cdns_uart_clk_notifier_cb;
+	if (clk_notifier_register(cdns_uart_data->uartclk,
+				&cdns_uart_data->clk_rate_change_nb))
+		dev_warn(&pdev->dev, "Unable to register clock notifier.\n");
+#endif
+
+	/* At this point, we've got an empty uart_port struct, initialize it */
+	spin_lock_init(&port->lock);
+	port->type	= PORT_UNKNOWN;
+	port->iotype	= UPIO_MEM32;
+	port->flags	= UPF_BOOT_AUTOCONF;
+	port->ops	= &cdns_uart_ops;
+	port->fifosize	= CDNS_UART_FIFO_SIZE;
+	port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE);
+	port->line	= id;
+
+	/*
+	 * Register the port.
+	 * This function also registers this device with the tty layer
+	 * and triggers invocation of the config_port() entry point.
+	 */
+	port->mapbase = res->start;
+	port->irq = irq;
+	port->dev = &pdev->dev;
+	port->uartclk = clk_get_rate(cdns_uart_data->uartclk);
+	port->private_data = cdns_uart_data;
+	port->read_status_mask = CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_RXTRIG |
+			CDNS_UART_IXR_OVERRUN | CDNS_UART_IXR_TOUT;
+	cdns_uart_data->port = port;
+	platform_set_drvdata(pdev, port);
+
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, UART_AUTOSUSPEND_TIMEOUT);
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+	device_init_wakeup(port->dev, true);
+
+#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
+	/*
+	 * If console hasn't been found yet try to assign this port
+	 * because it is required to be assigned for console setup function.
+	 * If register_console() don't assign value, then console_port pointer
+	 * is cleanup.
+	 */
+	if (!console_port) {
+		cdns_uart_console.index = id;
+		console_port = port;
+	}
+#endif
+
+	rc = uart_add_one_port(&cdns_uart_uart_driver, port);
+	if (rc) {
+		dev_err(&pdev->dev,
+			"uart_add_one_port() failed; err=%i\n", rc);
+		goto err_out_pm_disable;
+	}
+
+#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
+	/* This is not port which is used for console that's why clean it up */
+	if (console_port == port &&
+	    !console_is_registered(cdns_uart_uart_driver.cons)) {
+		console_port = NULL;
+		cdns_uart_console.index = -1;
+	}
+#endif
+
+	cdns_uart_data->cts_override = of_property_read_bool(pdev->dev.of_node,
+							     "cts-override");
+
+	instances++;
+
+	return 0;
+
+err_out_pm_disable:
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+#ifdef CONFIG_COMMON_CLK
+	clk_notifier_unregister(cdns_uart_data->uartclk,
+			&cdns_uart_data->clk_rate_change_nb);
+#endif
+err_out_clk_disable:
+	clk_disable_unprepare(cdns_uart_data->uartclk);
+err_out_clk_dis_pclk:
+	clk_disable_unprepare(cdns_uart_data->pclk);
+err_out_unregister_driver:
+	if (!instances)
+		uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
+	return rc;
+}
+
+/**
+ * cdns_uart_remove - called when the platform driver is unregistered
+ * @pdev: Pointer to the platform device structure
+ *
+ * Return: 0 on success, negative errno otherwise
+ */
+static int cdns_uart_remove(struct platform_device *pdev)
+{
+	struct uart_port *port = platform_get_drvdata(pdev);
+	struct cdns_uart *cdns_uart_data = port->private_data;
+
+	/* Remove the cdns_uart port from the serial core */
+#ifdef CONFIG_COMMON_CLK
+	clk_notifier_unregister(cdns_uart_data->uartclk,
+			&cdns_uart_data->clk_rate_change_nb);
+#endif
+	uart_remove_one_port(cdns_uart_data->cdns_uart_driver, port);
+	port->mapbase = 0;
+	clk_disable_unprepare(cdns_uart_data->uartclk);
+	clk_disable_unprepare(cdns_uart_data->pclk);
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	device_init_wakeup(&pdev->dev, false);
+
+#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
+	if (console_port == port)
+		console_port = NULL;
+#endif
+
+	if (!--instances)
+		uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
+	return 0;
+}
+
+static struct platform_driver cdns_uart_platform_driver = {
+	.probe   = cdns_uart_probe,
+	.remove  = cdns_uart_remove,
+	.driver  = {
+		.name = CDNS_UART_NAME,
+		.of_match_table = cdns_uart_of_match,
+		.pm = &cdns_uart_dev_pm_ops,
+		.suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_XILINX_PS_UART),
+		},
+};
+
+static int __init cdns_uart_init(void)
+{
+	/* Register the platform driver */
+	return platform_driver_register(&cdns_uart_platform_driver);
+}
+
+static void __exit cdns_uart_exit(void)
+{
+	/* Unregister the platform driver */
+	platform_driver_unregister(&cdns_uart_platform_driver);
+}
+
+arch_initcall(cdns_uart_init);
+module_exit(cdns_uart_exit);
+
+MODULE_DESCRIPTION("Driver for Cadence UART");
+MODULE_AUTHOR("Xilinx Inc.");
+MODULE_LICENSE("GPL");