Adding upstream version 6.8.9.upstream/6.8.9

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

83 files changed, 872 insertions, 755 deletions

diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index d7482ae33a..8c2aaf7af7 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -566,7 +566,7 @@ err_sysfs_remove:
 	return rc;
 }
 
-static int aspeed_vuart_remove(struct platform_device *pdev)
+static void aspeed_vuart_remove(struct platform_device *pdev)
 {
 	struct aspeed_vuart *vuart = platform_get_drvdata(pdev);
 
@@ -574,8 +574,6 @@ static int aspeed_vuart_remove(struct platform_device *pdev)
 	aspeed_vuart_set_enabled(vuart, false);
 	serial8250_unregister_port(vuart->line);
 	sysfs_remove_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);
-
-	return 0;
 }
 
 static const struct of_device_id aspeed_vuart_table[] = {
@@ -590,7 +588,7 @@ static struct platform_driver aspeed_vuart_driver = {
 		.of_match_table = aspeed_vuart_table,
 	},
 	.probe = aspeed_vuart_probe,
-	.remove = aspeed_vuart_remove,
+	.remove_new = aspeed_vuart_remove,
 };
 
 module_platform_driver(aspeed_vuart_driver);
diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c
index 4f4502fb54..beac6b340a 100644
--- a/drivers/tty/serial/8250/8250_bcm2835aux.c
+++ b/drivers/tty/serial/8250/8250_bcm2835aux.c
@@ -197,14 +197,12 @@ dis_clk:
 	return ret;
 }
 
-static int bcm2835aux_serial_remove(struct platform_device *pdev)
+static void bcm2835aux_serial_remove(struct platform_device *pdev)
 {
 	struct bcm2835aux_data *data = platform_get_drvdata(pdev);
 
 	serial8250_unregister_port(data->line);
 	clk_disable_unprepare(data->clk);
-
-	return 0;
 }
 
 static const struct bcm2835_aux_serial_driver_data bcm2835_acpi_data = {
@@ -230,7 +228,7 @@ static struct platform_driver bcm2835aux_serial_driver = {
 		.acpi_match_table = bcm2835aux_serial_acpi_match,
 	},
 	.probe  = bcm2835aux_serial_probe,
-	.remove = bcm2835aux_serial_remove,
+	.remove_new = bcm2835aux_serial_remove,
 };
 module_platform_driver(bcm2835aux_serial_driver);
 
diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c
index 55dea2539c..504c4c0208 100644
--- a/drivers/tty/serial/8250/8250_bcm7271.c
+++ b/drivers/tty/serial/8250/8250_bcm7271.c
@@ -1121,7 +1121,7 @@ release_dma:
 	return ret;
 }
 
-static int brcmuart_remove(struct platform_device *pdev)
+static void brcmuart_remove(struct platform_device *pdev)
 {
 	struct brcmuart_priv *priv = platform_get_drvdata(pdev);
 
@@ -1131,7 +1131,6 @@ static int brcmuart_remove(struct platform_device *pdev)
 	brcmuart_free_bufs(&pdev->dev, priv);
 	if (priv->dma_enabled)
 		brcmuart_arbitration(priv, 0);
-	return 0;
 }
 
 static int __maybe_unused brcmuart_suspend(struct device *dev)
@@ -1207,7 +1206,7 @@ static struct platform_driver brcmuart_platform_driver = {
 		.of_match_table = brcmuart_dt_ids,
 	},
 	.probe		= brcmuart_probe,
-	.remove		= brcmuart_remove,
+	.remove_new	= brcmuart_remove,
 };
 
 static int __init brcmuart_init(void)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 9127331518..b62ad90067 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -883,7 +883,7 @@ static int serial8250_probe(struct platform_device *dev)
 /*
  * Remove serial ports registered against a platform device.
  */
-static int serial8250_remove(struct platform_device *dev)
+static void serial8250_remove(struct platform_device *dev)
 {
 	int i;
 
@@ -893,7 +893,6 @@ static int serial8250_remove(struct platform_device *dev)
 		if (up->port.dev == &dev->dev)
 			serial8250_unregister_port(i);
 	}
-	return 0;
 }
 
 static int serial8250_suspend(struct platform_device *dev, pm_message_t state)
@@ -926,7 +925,7 @@ static int serial8250_resume(struct platform_device *dev)
 
 static struct platform_driver serial8250_isa_driver = {
 	.probe		= serial8250_probe,
-	.remove		= serial8250_remove,
+	.remove_new	= serial8250_remove,
 	.suspend	= serial8250_suspend,
 	.resume		= serial8250_resume,
 	.driver		= {
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index e6218766d0..2d1f350a4b 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -663,7 +663,7 @@ static int dw8250_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int dw8250_remove(struct platform_device *pdev)
+static void dw8250_remove(struct platform_device *pdev)
 {
 	struct dw8250_data *data = platform_get_drvdata(pdev);
 	struct device *dev = &pdev->dev;
@@ -680,8 +680,6 @@ static int dw8250_remove(struct platform_device *pdev)
 
 	pm_runtime_disable(dev);
 	pm_runtime_put_noidle(dev);
-
-	return 0;
 }
 
 static int dw8250_suspend(struct device *dev)
@@ -790,7 +788,7 @@ static struct platform_driver dw8250_platform_driver = {
 		.acpi_match_table = dw8250_acpi_match,
 	},
 	.probe			= dw8250_probe,
-	.remove			= dw8250_remove,
+	.remove_new		= dw8250_remove,
 };
 
 module_platform_driver(dw8250_platform_driver);
diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c
index 84843e204a..3e33ddf7bc 100644
--- a/drivers/tty/serial/8250/8250_dwlib.c
+++ b/drivers/tty/serial/8250/8250_dwlib.c
@@ -259,17 +259,6 @@ void dw8250_setup_port(struct uart_port *p)
 	}
 	up->capabilities |= UART_CAP_NOTEMT;
 
-	/*
-	 * If the Component Version Register returns zero, we know that
-	 * ADDITIONAL_FEATURES are not enabled. No need to go any further.
-	 */
-	reg = dw8250_readl_ext(p, DW_UART_UCV);
-	if (!reg)
-		return;
-
-	dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
-		(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);
-
 	/* Preserve value written by firmware or bootloader  */
 	old_dlf = dw8250_readl_ext(p, DW_UART_DLF);
 	dw8250_writel_ext(p, DW_UART_DLF, ~0U);
@@ -282,6 +271,11 @@ void dw8250_setup_port(struct uart_port *p)
 		p->set_divisor = dw8250_set_divisor;
 	}
 
+	reg = dw8250_readl_ext(p, DW_UART_UCV);
+	if (reg)
+		dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
+			(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);
+
 	reg = dw8250_readl_ext(p, DW_UART_CPR);
 	if (!reg) {
 		reg = data->pdata->cpr_val;
diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c
index ef5019e944..a754755100 100644
--- a/drivers/tty/serial/8250/8250_em.c
+++ b/drivers/tty/serial/8250/8250_em.c
@@ -200,12 +200,11 @@ static int serial8250_em_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int serial8250_em_remove(struct platform_device *pdev)
+static void serial8250_em_remove(struct platform_device *pdev)
 {
 	struct serial8250_em_priv *priv = platform_get_drvdata(pdev);
 
 	serial8250_unregister_port(priv->line);
-	return 0;
 }
 
 static const struct of_device_id serial8250_em_dt_ids[] = {
@@ -220,7 +219,7 @@ static struct platform_driver serial8250_em_platform_driver = {
 		.of_match_table = serial8250_em_dt_ids,
 	},
 	.probe			= serial8250_em_probe,
-	.remove			= serial8250_em_remove,
+	.remove_new		= serial8250_em_remove,
 };
 
 module_platform_driver(serial8250_em_platform_driver);
diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index f522eb5026..b4ed442082 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -51,7 +51,8 @@ int fsl8250_handle_irq(struct uart_port *port)
 	 * immediately and interrupt the CPU again. The hardware clears LSR.BI
 	 * when the next valid char is read.)
 	 */
-	if (unlikely(up->lsr_saved_flags & UART_LSR_BI)) {
+	if (unlikely((iir & UART_IIR_ID) == UART_IIR_RLSI &&
+		     (up->lsr_saved_flags & UART_LSR_BI))) {
 		up->lsr_saved_flags &= ~UART_LSR_BI;
 		port->serial_in(port, UART_RX);
 		uart_port_unlock_irqrestore(&up->port, flags);
@@ -159,12 +160,11 @@ static int fsl8250_acpi_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int fsl8250_acpi_remove(struct platform_device *pdev)
+static void fsl8250_acpi_remove(struct platform_device *pdev)
 {
 	struct fsl8250_data *data = platform_get_drvdata(pdev);
 
 	serial8250_unregister_port(data->line);
-	return 0;
 }
 
 static const struct acpi_device_id fsl_8250_acpi_id[] = {
@@ -179,7 +179,7 @@ static struct platform_driver fsl8250_platform_driver = {
 		.acpi_match_table	= ACPI_PTR(fsl_8250_acpi_id),
 	},
 	.probe			= fsl8250_acpi_probe,
-	.remove			= fsl8250_acpi_remove,
+	.remove_new		= fsl8250_acpi_remove,
 };
 
 module_platform_driver(fsl8250_platform_driver);
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
index 4c4c4da73a..a12f737924 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -320,14 +320,13 @@ out:
 	return err;
 }
 
-static int ingenic_uart_remove(struct platform_device *pdev)
+static void ingenic_uart_remove(struct platform_device *pdev)
 {
 	struct ingenic_uart_data *data = platform_get_drvdata(pdev);
 
 	serial8250_unregister_port(data->line);
 	clk_disable_unprepare(data->clk_module);
 	clk_disable_unprepare(data->clk_baud);
-	return 0;
 }
 
 static const struct ingenic_uart_config jz4740_uart_config = {
@@ -368,7 +367,7 @@ static struct platform_driver ingenic_uart_platform_driver = {
 		.of_match_table	= of_match,
 	},
 	.probe			= ingenic_uart_probe,
-	.remove			= ingenic_uart_remove,
+	.remove_new		= ingenic_uart_remove,
 };
 
 module_platform_driver(ingenic_uart_platform_driver);
diff --git a/drivers/tty/serial/8250/8250_ioc3.c b/drivers/tty/serial/8250/8250_ioc3.c
index d5a39e105a..50c77c3dac 100644
--- a/drivers/tty/serial/8250/8250_ioc3.c
+++ b/drivers/tty/serial/8250/8250_ioc3.c
@@ -75,17 +75,16 @@ static int serial8250_ioc3_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int serial8250_ioc3_remove(struct platform_device *pdev)
+static void serial8250_ioc3_remove(struct platform_device *pdev)
 {
 	struct ioc3_8250_data *data = platform_get_drvdata(pdev);
 
 	serial8250_unregister_port(data->line);
-	return 0;
 }
 
 static struct platform_driver serial8250_ioc3_driver = {
 	.probe  = serial8250_ioc3_probe,
-	.remove = serial8250_ioc3_remove,
+	.remove_new = serial8250_ioc3_remove,
 	.driver = {
 		.name = "ioc3-serial8250",
 	}
diff --git a/drivers/tty/serial/8250/8250_lpc18xx.c b/drivers/tty/serial/8250/8250_lpc18xx.c
index 6dc85aaba5..8d728a6a59 100644
--- a/drivers/tty/serial/8250/8250_lpc18xx.c
+++ b/drivers/tty/serial/8250/8250_lpc18xx.c
@@ -182,15 +182,13 @@ dis_clk_reg:
 	return ret;
 }
 
-static int lpc18xx_serial_remove(struct platform_device *pdev)
+static void lpc18xx_serial_remove(struct platform_device *pdev)
 {
 	struct lpc18xx_uart_data *data = platform_get_drvdata(pdev);
 
 	serial8250_unregister_port(data->line);
 	clk_disable_unprepare(data->clk_uart);
 	clk_disable_unprepare(data->clk_reg);
-
-	return 0;
 }
 
 static const struct of_device_id lpc18xx_serial_match[] = {
@@ -201,7 +199,7 @@ MODULE_DEVICE_TABLE(of, lpc18xx_serial_match);
 
 static struct platform_driver lpc18xx_serial_driver = {
 	.probe  = lpc18xx_serial_probe,
-	.remove = lpc18xx_serial_remove,
+	.remove_new = lpc18xx_serial_remove,
 	.driver = {
 		.name = "lpc18xx-uart",
 		.of_match_table = lpc18xx_serial_match,
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index 0e43bdfb74..776ec1ef29 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -287,17 +287,14 @@ static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port
 		return 0;
 	}
 
-	rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL);
+	rx_param = devm_kmemdup(dev, &lpss->dma_param, sizeof(*rx_param), GFP_KERNEL);
 	if (!rx_param)
 		return -ENOMEM;
 
-	tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL);
+	tx_param = devm_kmemdup(dev, &lpss->dma_param, sizeof(*tx_param), GFP_KERNEL);
 	if (!tx_param)
 		return -ENOMEM;
 
-	*rx_param = lpss->dma_param;
-	*tx_param = lpss->dma_param;
-
 	dma->fn = lpss8250_dma_filter;
 	dma->rx_param = rx_param;
 	dma->tx_param = tx_param;
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index 23457daae8..9ff6bbe9c0 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -581,7 +581,7 @@ static int mtk8250_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int mtk8250_remove(struct platform_device *pdev)
+static void mtk8250_remove(struct platform_device *pdev)
 {
 	struct mtk8250_data *data = platform_get_drvdata(pdev);
 
@@ -591,8 +591,6 @@ static int mtk8250_remove(struct platform_device *pdev)
 
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_put_noidle(&pdev->dev);
-
-	return 0;
 }
 
 static int __maybe_unused mtk8250_suspend(struct device *dev)
@@ -652,7 +650,7 @@ static struct platform_driver mtk8250_platform_driver = {
 		.of_match_table	= mtk8250_of_match,
 	},
 	.probe			= mtk8250_probe,
-	.remove			= mtk8250_remove,
+	.remove_new		= mtk8250_remove,
 };
 module_platform_driver(mtk8250_platform_driver);
 
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index ef3e745bd0..9dcc17e332 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -4,7 +4,10 @@
  *
  *    Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>, IBM Corp.
  */
+
+#include <linux/bits.h>
 #include <linux/console.h>
+#include <linux/math.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/serial_core.h>
@@ -25,6 +28,36 @@ struct of_serial_info {
 	int line;
 };
 
+/* Nuvoton NPCM timeout register */
+#define UART_NPCM_TOR          7
+#define UART_NPCM_TOIE         BIT(7)  /* Timeout Interrupt Enable */
+
+static int npcm_startup(struct uart_port *port)
+{
+	/*
+	 * Nuvoton calls the scratch register 'UART_TOR' (timeout
+	 * register). Enable it, and set TIOC (timeout interrupt
+	 * comparator) to be 0x20 for correct operation.
+	 */
+	serial_port_out(port, UART_NPCM_TOR, UART_NPCM_TOIE | 0x20);
+
+	return serial8250_do_startup(port);
+}
+
+/* Nuvoton NPCM UARTs have a custom divisor calculation */
+static unsigned int npcm_get_divisor(struct uart_port *port, unsigned int baud,
+				     unsigned int *frac)
+{
+	return DIV_ROUND_CLOSEST(port->uartclk, 16 * baud + 2) - 2;
+}
+
+static int npcm_setup(struct uart_port *port)
+{
+	port->get_divisor = npcm_get_divisor;
+	port->startup = npcm_startup;
+	return 0;
+}
+
 /*
  * Fill a struct uart_port for a given device node
  */
@@ -164,10 +197,17 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 	switch (type) {
 	case PORT_RT2880:
 		ret = rt288x_setup(port);
-		if (ret)
-			goto err_pmruntime;
+		break;
+	case PORT_NPCM:
+		ret = npcm_setup(port);
+		break;
+	default:
+		/* Nothing to do */
+		ret = 0;
 		break;
 	}
+	if (ret)
+		goto err_pmruntime;
 
 	if (IS_REACHABLE(CONFIG_SERIAL_8250_FSL) &&
 	    (of_device_is_compatible(np, "fsl,ns16550") ||
@@ -251,7 +291,7 @@ err_free:
 /*
  * Release a line
  */
-static int of_platform_serial_remove(struct platform_device *ofdev)
+static void of_platform_serial_remove(struct platform_device *ofdev)
 {
 	struct of_serial_info *info = platform_get_drvdata(ofdev);
 
@@ -261,7 +301,6 @@ static int of_platform_serial_remove(struct platform_device *ofdev)
 	pm_runtime_put_sync(&ofdev->dev);
 	pm_runtime_disable(&ofdev->dev);
 	kfree(info);
-	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -337,7 +376,7 @@ static struct platform_driver of_platform_serial_driver = {
 		.pm = &of_serial_pm_ops,
 	},
 	.probe = of_platform_serial_probe,
-	.remove = of_platform_serial_remove,
+	.remove_new = of_platform_serial_remove,
 };
 
 module_platform_driver(of_platform_serial_driver);
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index dd2be7a813..6942990a33 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1586,7 +1586,7 @@ err:
 	return ret;
 }
 
-static int omap8250_remove(struct platform_device *pdev)
+static void omap8250_remove(struct platform_device *pdev)
 {
 	struct omap8250_priv *priv = platform_get_drvdata(pdev);
 	struct uart_8250_port *up;
@@ -1606,7 +1606,6 @@ static int omap8250_remove(struct platform_device *pdev)
 	pm_runtime_disable(&pdev->dev);
 	cpu_latency_qos_remove_request(&priv->pm_qos_request);
 	device_init_wakeup(&pdev->dev, false);
-	return 0;
 }
 
 static int omap8250_prepare(struct device *dev)
@@ -1865,7 +1864,7 @@ static struct platform_driver omap8250_platform_driver = {
 		.of_match_table = omap8250_dt_ids,
 	},
 	.probe			= omap8250_probe,
-	.remove			= omap8250_remove,
+	.remove_new		= omap8250_remove,
 };
 module_platform_driver(omap8250_platform_driver);
 
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 8ccf691935..0d35c77fad 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2039,12 +2039,13 @@ static int pci_moxa_init(struct pci_dev *dev)
 	unsigned short device = dev->device;
 	resource_size_t iobar_addr = pci_resource_start(dev, 2);
 	unsigned int num_ports = (device & 0x00F0) >> 4, i;
-	u8 val;
+	u8 val, init_mode = MOXA_RS232;
 
 	if (!(pci_moxa_supported_rs(dev) & MOXA_SUPP_RS232)) {
-		for (i = 0; i < num_ports; ++i)
-			pci_moxa_set_interface(dev, i, MOXA_RS422);
+		init_mode = MOXA_RS422;
 	}
+	for (i = 0; i < num_ports; ++i)
+		pci_moxa_set_interface(dev, i, init_mode);
 
 	/*
 	 * Enable hardware buffer to prevent break signal output when system boots up.
diff --git a/drivers/tty/serial/8250/8250_pci1xxxx.c b/drivers/tty/serial/8250/8250_pci1xxxx.c
index 9f9e219819..2dda737b16 100644
--- a/drivers/tty/serial/8250/8250_pci1xxxx.c
+++ b/drivers/tty/serial/8250/8250_pci1xxxx.c
@@ -9,15 +9,21 @@
 
 #include <linux/bitfield.h>
 #include <linux/bitops.h>
+#include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/units.h>
 #include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/8250_pci.h>
 
 #include <asm/byteorder.h>
 
@@ -52,6 +58,17 @@
 #define PCI_SUBDEVICE_ID_EFAR_PCI11400		PCI_DEVICE_ID_EFAR_PCI11400
 #define PCI_SUBDEVICE_ID_EFAR_PCI11414		PCI_DEVICE_ID_EFAR_PCI11414
 
+#define UART_SYSTEM_ADDR_BASE			0x1000
+#define UART_DEV_REV_REG			(UART_SYSTEM_ADDR_BASE + 0x00)
+#define UART_DEV_REV_MASK			GENMASK(7, 0)
+#define UART_SYSLOCK_REG			(UART_SYSTEM_ADDR_BASE + 0xA0)
+#define UART_SYSLOCK				BIT(2)
+#define SYSLOCK_SLEEP_TIMEOUT			100
+#define SYSLOCK_RETRY_CNT			1000
+
+#define UART_RX_BYTE_FIFO			0x00
+#define UART_FIFO_CTL				0x02
+
 #define UART_ACTV_REG				0x11
 #define UART_BLOCK_SET_ACTIVE			BIT(0)
 
@@ -82,8 +99,59 @@
 #define UART_RESET_REG				0x94
 #define UART_RESET_D3_RESET_DISABLE		BIT(16)
 
+#define UART_BURST_STATUS_REG			0x9C
+#define UART_RX_BURST_FIFO			0xA4
+
 #define MAX_PORTS				4
 #define PORT_OFFSET				0x100
+#define RX_BUF_SIZE				512
+#define UART_BYTE_SIZE                          1
+#define UART_BURST_SIZE				4
+
+#define UART_BST_STAT_RX_COUNT_MASK		0x00FF
+#define UART_BST_STAT_IIR_INT_PEND		0x100000
+#define UART_LSR_OVERRUN_ERR_CLR		0x43
+#define UART_BST_STAT_LSR_RX_MASK		0x9F000000
+#define UART_BST_STAT_LSR_RX_ERR_MASK		0x9E000000
+#define UART_BST_STAT_LSR_OVERRUN_ERR		0x2000000
+#define UART_BST_STAT_LSR_PARITY_ERR		0x4000000
+#define UART_BST_STAT_LSR_FRAME_ERR		0x8000000
+
+struct pci1xxxx_8250 {
+	unsigned int nr;
+	u8 dev_rev;
+	u8 pad[3];
+	void __iomem *membase;
+	int line[] __counted_by(nr);
+};
+
+static const struct serial_rs485 pci1xxxx_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND |
+		 SER_RS485_RTS_AFTER_SEND,
+	.delay_rts_after_send = 1,
+	/* Delay RTS before send is not supported */
+};
+
+static int pci1xxxx_set_sys_lock(struct pci1xxxx_8250 *port)
+{
+	writel(UART_SYSLOCK, port->membase + UART_SYSLOCK_REG);
+	return readl(port->membase + UART_SYSLOCK_REG);
+}
+
+static int pci1xxxx_acquire_sys_lock(struct pci1xxxx_8250 *port)
+{
+	u32 regval;
+
+	return readx_poll_timeout(pci1xxxx_set_sys_lock, port, regval,
+				  (regval & UART_SYSLOCK),
+				  SYSLOCK_SLEEP_TIMEOUT,
+				  SYSLOCK_RETRY_CNT * SYSLOCK_SLEEP_TIMEOUT);
+}
+
+static void pci1xxxx_release_sys_lock(struct pci1xxxx_8250 *port)
+{
+	writel(0x0, port->membase + UART_SYSLOCK_REG);
+}
 
 static const int logical_to_physical_port_idx[][MAX_PORTS] = {
 	{0,  1,  2,  3}, /* PCI12000, PCI11010, PCI11101, PCI11400, PCI11414 */
@@ -104,12 +172,6 @@ static const int logical_to_physical_port_idx[][MAX_PORTS] = {
 	{3, -1, -1, -1}, /* PCI1p3 */
 };
 
-struct pci1xxxx_8250 {
-	unsigned int nr;
-	void __iomem *membase;
-	int line[] __counted_by(nr);
-};
-
 static int pci1xxxx_get_num_ports(struct pci_dev *dev)
 {
 	switch (dev->subsystem_device) {
@@ -205,12 +267,102 @@ static int pci1xxxx_rs485_config(struct uart_port *port,
 	return 0;
 }
 
-static const struct serial_rs485 pci1xxxx_rs485_supported = {
-	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND |
-		 SER_RS485_RTS_AFTER_SEND,
-	.delay_rts_after_send = 1,
-	/* Delay RTS before send is not supported */
-};
+static u32 pci1xxxx_read_burst_status(struct uart_port *port)
+{
+	u32 status;
+
+	status = readl(port->membase + UART_BURST_STATUS_REG);
+	if (status & UART_BST_STAT_LSR_RX_ERR_MASK) {
+		if (status & UART_BST_STAT_LSR_OVERRUN_ERR) {
+			writeb(UART_LSR_OVERRUN_ERR_CLR,
+			       port->membase + UART_FIFO_CTL);
+			port->icount.overrun++;
+		}
+
+		if (status & UART_BST_STAT_LSR_FRAME_ERR)
+			port->icount.frame++;
+
+		if (status & UART_BST_STAT_LSR_PARITY_ERR)
+			port->icount.parity++;
+	}
+	return status;
+}
+
+static void pci1xxxx_process_read_data(struct uart_port *port,
+				       unsigned char *rx_buff, u32 *buff_index,
+				       u32 *valid_byte_count)
+{
+	u32 valid_burst_count = *valid_byte_count / UART_BURST_SIZE;
+	u32 *burst_buf;
+
+	/*
+	 * Depending on the RX Trigger Level the number of bytes that can be
+	 * stored in RX FIFO at a time varies. Each transaction reads data
+	 * in DWORDs. If there are less than four remaining valid_byte_count
+	 * to read, the data is received one byte at a time.
+	 */
+	while (valid_burst_count--) {
+		if (*buff_index > (RX_BUF_SIZE - UART_BURST_SIZE))
+			break;
+		burst_buf = (u32 *)&rx_buff[*buff_index];
+		*burst_buf = readl(port->membase + UART_RX_BURST_FIFO);
+		*buff_index += UART_BURST_SIZE;
+		*valid_byte_count -= UART_BURST_SIZE;
+	}
+
+	while (*valid_byte_count) {
+		if (*buff_index >= RX_BUF_SIZE)
+			break;
+		rx_buff[*buff_index] = readb(port->membase +
+					     UART_RX_BYTE_FIFO);
+		*buff_index += UART_BYTE_SIZE;
+		*valid_byte_count -= UART_BYTE_SIZE;
+	}
+}
+
+static void pci1xxxx_rx_burst(struct uart_port *port, u32 uart_status)
+{
+	u32 valid_byte_count = uart_status & UART_BST_STAT_RX_COUNT_MASK;
+	struct tty_port *tty_port = &port->state->port;
+	unsigned char rx_buff[RX_BUF_SIZE];
+	u32 buff_index = 0;
+	u32 copied_len;
+
+	if (valid_byte_count != 0 &&
+	    valid_byte_count < RX_BUF_SIZE) {
+		pci1xxxx_process_read_data(port, rx_buff, &buff_index,
+					   &valid_byte_count);
+
+		copied_len = (u32)tty_insert_flip_string(tty_port, rx_buff,
+							 buff_index);
+
+		if (copied_len != buff_index)
+			port->icount.overrun += buff_index - copied_len;
+
+		port->icount.rx += buff_index;
+		tty_flip_buffer_push(tty_port);
+	}
+}
+
+static int pci1xxxx_handle_irq(struct uart_port *port)
+{
+	unsigned long flags;
+	u32 status;
+
+	status = pci1xxxx_read_burst_status(port);
+
+	if (status & UART_BST_STAT_IIR_INT_PEND)
+		return 0;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	if (status & UART_BST_STAT_LSR_RX_MASK)
+		pci1xxxx_rx_burst(port, status);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	return 1;
+}
 
 static bool pci1xxxx_port_suspend(int line)
 {
@@ -323,7 +475,7 @@ static int pci1xxxx_resume(struct device *dev)
 }
 
 static int pci1xxxx_setup(struct pci_dev *pdev,
-			  struct uart_8250_port *port, int port_idx)
+			  struct uart_8250_port *port, int port_idx, int rev)
 {
 	int ret;
 
@@ -335,6 +487,10 @@ static int pci1xxxx_setup(struct pci_dev *pdev,
 	port->port.rs485_config = pci1xxxx_rs485_config;
 	port->port.rs485_supported = pci1xxxx_rs485_supported;
 
+	/* From C0 rev Burst operation is supported */
+	if (rev >= 0xC0)
+		port->port.handle_irq = pci1xxxx_handle_irq;
+
 	ret = serial8250_pci_setup_port(pdev, port, 0, PORT_OFFSET * port_idx, 0);
 	if (ret < 0)
 		return ret;
@@ -370,6 +526,27 @@ static int pci1xxxx_logical_to_physical_port_translate(int subsys_dev, int port)
 	return logical_to_physical_port_idx[0][port];
 }
 
+static int pci1xxxx_get_device_revision(struct pci1xxxx_8250 *priv)
+{
+	u32 regval;
+	int ret;
+
+	/*
+	 * DEV REV is a system register, HW Syslock bit
+	 * should be acquired before accessing the register
+	 */
+	ret = pci1xxxx_acquire_sys_lock(priv);
+	if (ret)
+		return ret;
+
+	regval = readl(priv->membase + UART_DEV_REV_REG);
+	priv->dev_rev = regval & UART_DEV_REV_MASK;
+
+	pci1xxxx_release_sys_lock(priv);
+
+	return 0;
+}
+
 static int pci1xxxx_serial_probe(struct pci_dev *pdev,
 				 const struct pci_device_id *id)
 {
@@ -381,6 +558,7 @@ static int pci1xxxx_serial_probe(struct pci_dev *pdev,
 	int num_vectors;
 	int subsys_dev;
 	int port_idx;
+	int ret;
 	int rc;
 
 	rc = pcim_enable_device(pdev);
@@ -397,6 +575,10 @@ static int pci1xxxx_serial_probe(struct pci_dev *pdev,
 	if (!priv->membase)
 		return -ENOMEM;
 
+	ret = pci1xxxx_get_device_revision(priv);
+	if (ret)
+		return ret;
+
 	pci_set_master(pdev);
 
 	priv->nr = nr_ports;
@@ -428,7 +610,7 @@ static int pci1xxxx_serial_probe(struct pci_dev *pdev,
 		else
 			uart.port.irq = pci_irq_vector(pdev, 0);
 
-		rc = pci1xxxx_setup(pdev, &uart, port_idx);
+		rc = pci1xxxx_setup(pdev, &uart, port_idx, priv->dev_rev);
 		if (rc) {
 			dev_warn(dev, "Failed to setup port %u\n", i);
 			continue;
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 1d65055dde..c0c34e410c 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -38,10 +38,6 @@
 
 #include "8250.h"
 
-/* Nuvoton NPCM timeout register */
-#define UART_NPCM_TOR          7
-#define UART_NPCM_TOIE         BIT(7)  /* Timeout Interrupt Enable */
-
 /*
  * Debugging.
  */
@@ -2229,15 +2225,6 @@ int serial8250_do_startup(struct uart_port *port)
 				UART_DA830_PWREMU_MGMT_FREE);
 	}
 
-	if (port->type == PORT_NPCM) {
-		/*
-		 * Nuvoton calls the scratch register 'UART_TOR' (timeout
-		 * register). Enable it, and set TIOC (timeout interrupt
-		 * comparator) to be 0x20 for correct operation.
-		 */
-		serial_port_out(port, UART_NPCM_TOR, UART_NPCM_TOIE | 0x20);
-	}
-
 #ifdef CONFIG_SERIAL_8250_RSA
 	/*
 	 * If this is an RSA port, see if we can kick it up to the
@@ -2539,15 +2526,6 @@ static void serial8250_shutdown(struct uart_port *port)
 		serial8250_do_shutdown(port);
 }
 
-/* Nuvoton NPCM UARTs have a custom divisor calculation */
-static unsigned int npcm_get_divisor(struct uart_8250_port *up,
-		unsigned int baud)
-{
-	struct uart_port *port = &up->port;
-
-	return DIV_ROUND_CLOSEST(port->uartclk, 16 * baud + 2) - 2;
-}
-
 static unsigned int serial8250_do_get_divisor(struct uart_port *port,
 					      unsigned int baud,
 					      unsigned int *frac)
@@ -2592,8 +2570,6 @@ static unsigned int serial8250_do_get_divisor(struct uart_port *port,
 		quot = 0x8001;
 	else if (magic_multiplier && baud >= port->uartclk / 12)
 		quot = 0x8002;
-	else if (up->port.type == PORT_NPCM)
-		quot = npcm_get_divisor(up, baud);
 	else
 		quot = uart_get_divisor(port, baud);
 
diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c
index a5b3ea27fc..77686da42c 100644
--- a/drivers/tty/serial/8250/8250_pxa.c
+++ b/drivers/tty/serial/8250/8250_pxa.c
@@ -146,20 +146,18 @@ static int serial_pxa_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int serial_pxa_remove(struct platform_device *pdev)
+static void serial_pxa_remove(struct platform_device *pdev)
 {
 	struct pxa8250_data *data = platform_get_drvdata(pdev);
 
 	serial8250_unregister_port(data->line);
 
 	clk_unprepare(data->clk);
-
-	return 0;
 }
 
 static struct platform_driver serial_pxa_driver = {
 	.probe          = serial_pxa_probe,
-	.remove         = serial_pxa_remove,
+	.remove_new     = serial_pxa_remove,
 
 	.driver		= {
 		.name	= "pxa2xx-uart",
diff --git a/drivers/tty/serial/8250/8250_tegra.c b/drivers/tty/serial/8250/8250_tegra.c
index 89956bbf34..ba352262df 100644
--- a/drivers/tty/serial/8250/8250_tegra.c
+++ b/drivers/tty/serial/8250/8250_tegra.c
@@ -128,15 +128,13 @@ err_clkdisable:
 	return ret;
 }
 
-static int tegra_uart_remove(struct platform_device *pdev)
+static void tegra_uart_remove(struct platform_device *pdev)
 {
 	struct tegra_uart *uart = platform_get_drvdata(pdev);
 
 	serial8250_unregister_port(uart->line);
 	reset_control_assert(uart->rst);
 	clk_disable_unprepare(uart->clk);
-
-	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -192,7 +190,7 @@ static struct platform_driver tegra_uart_driver = {
 		.acpi_match_table = ACPI_PTR(tegra_uart_acpi_match),
 	},
 	.probe = tegra_uart_probe,
-	.remove = tegra_uart_remove,
+	.remove_new = tegra_uart_remove,
 };
 
 module_platform_driver(tegra_uart_driver);
diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c
index a405155264..6399a38ecc 100644
--- a/drivers/tty/serial/8250/8250_uniphier.c
+++ b/drivers/tty/serial/8250/8250_uniphier.c
@@ -241,14 +241,12 @@ static int uniphier_uart_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int uniphier_uart_remove(struct platform_device *pdev)
+static void uniphier_uart_remove(struct platform_device *pdev)
 {
 	struct uniphier8250_priv *priv = platform_get_drvdata(pdev);
 
 	serial8250_unregister_port(priv->line);
 	clk_disable_unprepare(priv->clk);
-
-	return 0;
 }
 
 static int __maybe_unused uniphier_uart_suspend(struct device *dev)
@@ -293,7 +291,7 @@ MODULE_DEVICE_TABLE(of, uniphier_uart_match);
 
 static struct platform_driver uniphier_uart_platform_driver = {
 	.probe		= uniphier_uart_probe,
-	.remove		= uniphier_uart_remove,
+	.remove_new	= uniphier_uart_remove,
 	.driver = {
 		.name	= "uniphier-uart",
 		.of_match_table = uniphier_uart_match,
diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index dc2ef05a10..2056aed466 100644
--- a/drivers/tty/serial/8250/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
@@ -90,12 +90,6 @@ struct serial_info {
 	const struct serial_quirk *quirk;
 };
 
-struct serial_cfg_mem {
-	tuple_t tuple;
-	cisparse_t parse;
-	u_char buf[256];
-};
-
 /*
  * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6"
  * manfid 0x0160, 0x0104
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 732c893c8d..ffcf4882b2 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -87,7 +87,7 @@ config SERIAL_EARLYCON_SEMIHOST
 
 config SERIAL_EARLYCON_RISCV_SBI
 	bool "Early console using RISC-V SBI"
-	depends on RISCV_SBI_V01
+	depends on RISCV_SBI
 	select SERIAL_CORE
 	select SERIAL_CORE_CONSOLE
 	select SERIAL_EARLYCON
@@ -532,6 +532,9 @@ config SERIAL_UARTLITE_NR_UARTS
 	help
 	  Set this to the number of uartlites in your system, or the number
 	  you think you might implement.
+	  If maximum number of uartlite serial ports is more than 4, then the
+	  driver uses dynamic allocation instead of static allocation for major
+	  number.
 
 config SERIAL_SUNCORE
 	bool
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index 7090b251dd..effcba71ea 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -425,7 +425,7 @@ static int altera_jtaguart_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int altera_jtaguart_remove(struct platform_device *pdev)
+static void altera_jtaguart_remove(struct platform_device *pdev)
 {
 	struct uart_port *port;
 	int i = pdev->id;
@@ -436,8 +436,6 @@ static int altera_jtaguart_remove(struct platform_device *pdev)
 	port = &altera_jtaguart_ports[i];
 	uart_remove_one_port(&altera_jtaguart_driver, port);
 	iounmap(port->membase);
-
-	return 0;
 }
 
 #ifdef CONFIG_OF
@@ -451,7 +449,7 @@ MODULE_DEVICE_TABLE(of, altera_jtaguart_match);
 
 static struct platform_driver altera_jtaguart_platform_driver = {
 	.probe	= altera_jtaguart_probe,
-	.remove	= altera_jtaguart_remove,
+	.remove_new = altera_jtaguart_remove,
 	.driver	= {
 		.name		= DRV_NAME,
 		.of_match_table	= of_match_ptr(altera_jtaguart_match),
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 77835ac68d..897f0995b2 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -305,7 +305,7 @@ static int altera_uart_startup(struct uart_port *port)
 		int ret;
 
 		ret = request_irq(port->irq, altera_uart_interrupt, 0,
-				DRV_NAME, port);
+				dev_name(port->dev), port);
 		if (ret) {
 			pr_err(DRV_NAME ": unable to attach Altera UART %d "
 			       "interrupt vector=%d\n", port->line, port->irq);
@@ -595,7 +595,7 @@ static int altera_uart_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int altera_uart_remove(struct platform_device *pdev)
+static void altera_uart_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = platform_get_drvdata(pdev);
 
@@ -604,8 +604,6 @@ static int altera_uart_remove(struct platform_device *pdev)
 		port->mapbase = 0;
 		iounmap(port->membase);
 	}
-
-	return 0;
 }
 
 #ifdef CONFIG_OF
@@ -619,7 +617,7 @@ MODULE_DEVICE_TABLE(of, altera_uart_match);
 
 static struct platform_driver altera_uart_platform_driver = {
 	.probe	= altera_uart_probe,
-	.remove	= altera_uart_remove,
+	.remove_new = altera_uart_remove,
 	.driver	= {
 		.name		= DRV_NAME,
 		.of_match_table	= of_match_ptr(altera_uart_match),
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 474e2b7f43..cf2c890a56 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -50,8 +50,8 @@
 
 #define AMBA_ISR_PASS_LIMIT	256
 
-#define UART_DR_ERROR		(UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE)
-#define UART_DUMMY_DR_RX	(1 << 16)
+#define UART_DR_ERROR		(UART011_DR_OE | UART011_DR_BE | UART011_DR_PE | UART011_DR_FE)
+#define UART_DUMMY_DR_RX	BIT(16)
 
 enum {
 	REG_DR,
@@ -125,7 +125,7 @@ static unsigned int get_fifosize_arm(struct amba_device *dev)
 
 static struct vendor_data vendor_arm = {
 	.reg_offset		= pl011_std_offsets,
-	.ifls			= UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+	.ifls			= UART011_IFLS_RX4_8 | UART011_IFLS_TX4_8,
 	.fr_busy		= UART01x_FR_BUSY,
 	.fr_dsr			= UART01x_FR_DSR,
 	.fr_cts			= UART01x_FR_CTS,
@@ -203,7 +203,7 @@ static unsigned int get_fifosize_st(struct amba_device *dev)
 
 static struct vendor_data vendor_st = {
 	.reg_offset		= pl011_st_offsets,
-	.ifls			= UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
+	.ifls			= UART011_IFLS_RX_HALF | UART011_IFLS_TX_HALF,
 	.fr_busy		= UART01x_FR_BUSY,
 	.fr_dsr			= UART01x_FR_DSR,
 	.fr_cts			= UART01x_FR_CTS,
@@ -277,13 +277,13 @@ struct uart_amba_port {
 static unsigned int pl011_tx_empty(struct uart_port *port);
 
 static unsigned int pl011_reg_to_offset(const struct uart_amba_port *uap,
-	unsigned int reg)
+					unsigned int reg)
 {
 	return uap->reg_offset[reg];
 }
 
 static unsigned int pl011_read(const struct uart_amba_port *uap,
-	unsigned int reg)
+			       unsigned int reg)
 {
 	void __iomem *addr = uap->port.membase + pl011_reg_to_offset(uap, reg);
 
@@ -292,7 +292,7 @@ static unsigned int pl011_read(const struct uart_amba_port *uap,
 }
 
 static void pl011_write(unsigned int val, const struct uart_amba_port *uap,
-	unsigned int reg)
+			unsigned int reg)
 {
 	void __iomem *addr = uap->port.membase + pl011_reg_to_offset(uap, reg);
 
@@ -330,10 +330,11 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap)
 				uap->port.icount.brk++;
 				if (uart_handle_break(&uap->port))
 					continue;
-			} else if (ch & UART011_DR_PE)
+			} else if (ch & UART011_DR_PE) {
 				uap->port.icount.parity++;
-			else if (ch & UART011_DR_FE)
+			} else if (ch & UART011_DR_FE) {
 				uap->port.icount.frame++;
+			}
 			if (ch & UART011_DR_OE)
 				uap->port.icount.overrun++;
 
@@ -358,7 +359,6 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap)
 	return fifotaken;
 }
 
-
 /*
  * All the DMA operation mode stuff goes inside this ifdef.
  * This assumes that you have a generic DMA device interface,
@@ -369,7 +369,7 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap)
 #define PL011_DMA_BUFFER_SIZE PAGE_SIZE
 
 static int pl011_dmabuf_init(struct dma_chan *chan, struct pl011_dmabuf *db,
-	enum dma_data_direction dir)
+			     enum dma_data_direction dir)
 {
 	db->buf = dma_alloc_coherent(chan->device->dev, PL011_DMA_BUFFER_SIZE,
 				     &db->dma, GFP_KERNEL);
@@ -381,7 +381,7 @@ static int pl011_dmabuf_init(struct dma_chan *chan, struct pl011_dmabuf *db,
 }
 
 static void pl011_dmabuf_free(struct dma_chan *chan, struct pl011_dmabuf *db,
-	enum dma_data_direction dir)
+			      enum dma_data_direction dir)
 {
 	if (db->buf) {
 		dma_free_coherent(chan->device->dev,
@@ -424,7 +424,7 @@ static void pl011_dma_probe(struct uart_amba_port *uap)
 		dma_cap_set(DMA_SLAVE, mask);
 
 		chan = dma_request_channel(mask, plat->dma_filter,
-						plat->dma_tx_param);
+					   plat->dma_tx_param);
 		if (!chan) {
 			dev_err(uap->port.dev, "no TX DMA channel!\n");
 			return;
@@ -438,9 +438,9 @@ static void pl011_dma_probe(struct uart_amba_port *uap)
 		 dma_chan_name(uap->dmatx.chan));
 
 	/* Optionally make use of an RX channel as well */
-	chan = dma_request_slave_channel(dev, "rx");
+	chan = dma_request_chan(dev, "rx");
 
-	if (!chan && plat && plat->dma_rx_param) {
+	if (IS_ERR(chan) && plat && plat->dma_rx_param) {
 		chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param);
 
 		if (!chan) {
@@ -449,7 +449,7 @@ static void pl011_dma_probe(struct uart_amba_port *uap)
 		}
 	}
 
-	if (chan) {
+	if (!IS_ERR(chan)) {
 		struct dma_slave_config rx_conf = {
 			.src_addr = uap->port.mapbase +
 				pl011_reg_to_offset(uap, REG_DR),
@@ -465,12 +465,12 @@ static void pl011_dma_probe(struct uart_amba_port *uap)
 		 * If the controller does, check for suitable residue processing
 		 * otherwise assime all is well.
 		 */
-		if (0 == dma_get_slave_caps(chan, &caps)) {
+		if (dma_get_slave_caps(chan, &caps) == 0) {
 			if (caps.residue_granularity ==
 					DMA_RESIDUE_GRANULARITY_DESCRIPTOR) {
 				dma_release_channel(chan);
 				dev_info(uap->port.dev,
-					"RX DMA disabled - no residue processing\n");
+					 "RX DMA disabled - no residue processing\n");
 				return;
 			}
 		}
@@ -499,18 +499,16 @@ static void pl011_dma_probe(struct uart_amba_port *uap)
 			else
 				uap->dmarx.poll_timeout = 3000;
 		} else if (!plat && dev->of_node) {
-			uap->dmarx.auto_poll_rate = of_property_read_bool(
-						dev->of_node, "auto-poll");
+			uap->dmarx.auto_poll_rate =
+					of_property_read_bool(dev->of_node, "auto-poll");
 			if (uap->dmarx.auto_poll_rate) {
 				u32 x;
 
-				if (0 == of_property_read_u32(dev->of_node,
-						"poll-rate-ms", &x))
+				if (of_property_read_u32(dev->of_node, "poll-rate-ms", &x) == 0)
 					uap->dmarx.poll_rate = x;
 				else
 					uap->dmarx.poll_rate = 100;
-				if (0 == of_property_read_u32(dev->of_node,
-						"poll-timeout-ms", &x))
+				if (of_property_read_u32(dev->of_node, "poll-timeout-ms", &x) == 0)
 					uap->dmarx.poll_timeout = x;
 				else
 					uap->dmarx.poll_timeout = 3000;
@@ -547,7 +545,7 @@ static void pl011_dma_tx_callback(void *data)
 	uart_port_lock_irqsave(&uap->port, &flags);
 	if (uap->dmatx.queued)
 		dma_unmap_single(dmatx->chan->device->dev, dmatx->dma,
-				dmatx->len, DMA_TO_DEVICE);
+				 dmatx->len, DMA_TO_DEVICE);
 
 	dmacr = uap->dmacr;
 	uap->dmacr = dmacr & ~UART011_TXDMAE;
@@ -618,9 +616,9 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap)
 	if (count > PL011_DMA_BUFFER_SIZE)
 		count = PL011_DMA_BUFFER_SIZE;
 
-	if (xmit->tail < xmit->head)
+	if (xmit->tail < xmit->head) {
 		memcpy(&dmatx->buf[0], &xmit->buf[xmit->tail], count);
-	else {
+	} else {
 		size_t first = UART_XMIT_SIZE - xmit->tail;
 		size_t second;
 
@@ -643,7 +641,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap)
 	}
 
 	desc = dmaengine_prep_slave_single(chan, dmatx->dma, dmatx->len, DMA_MEM_TO_DEV,
-					     DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+					   DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
 		dma_unmap_single(dma_dev->dev, dmatx->dma, dmatx->len, DMA_TO_DEVICE);
 		uap->dmatx.queued = false;
@@ -754,8 +752,9 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
 			if (pl011_dma_tx_refill(uap) > 0) {
 				uap->im &= ~UART011_TXIM;
 				pl011_write(uap->im, uap, REG_IMSC);
-			} else
+			} else {
 				ret = false;
+			}
 		} else if (!(uap->dmacr & UART011_TXDMAE)) {
 			uap->dmacr |= UART011_TXDMAE;
 			pl011_write(uap->dmacr, uap, REG_DMACR);
@@ -832,8 +831,8 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap)
 	dbuf = uap->dmarx.use_buf_b ?
 		&uap->dmarx.dbuf_b : &uap->dmarx.dbuf_a;
 	desc = dmaengine_prep_slave_single(rxchan, dbuf->dma, dbuf->len,
-					DMA_DEV_TO_MEM,
-					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+					   DMA_DEV_TO_MEM,
+					   DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	/*
 	 * If the DMA engine is busy and cannot prepare a
 	 * channel, no big deal, the driver will fall back
@@ -889,14 +888,12 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap,
 
 	/* Pick the remain data from the DMA */
 	if (pending) {
-
 		/*
 		 * First take all chars in the DMA pipe, then look in the FIFO.
 		 * Note that tty_insert_flip_buf() tries to take as many chars
 		 * as it can.
 		 */
-		dma_count = tty_insert_flip_string(port, dbuf->buf + dmataken,
-				pending);
+		dma_count = tty_insert_flip_string(port, dbuf->buf + dmataken, pending);
 
 		uap->port.icount.rx += dma_count;
 		if (dma_count < pending)
@@ -978,8 +975,8 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap)
 	/* Switch buffer & re-trigger DMA job */
 	dmarx->use_buf_b = !dmarx->use_buf_b;
 	if (pl011_dma_rx_trigger_dma(uap)) {
-		dev_dbg(uap->port.dev, "could not retrigger RX DMA job "
-			"fall back to interrupt mode\n");
+		dev_dbg(uap->port.dev,
+			"could not retrigger RX DMA job fall back to interrupt mode\n");
 		uap->im |= UART011_RXIM;
 		pl011_write(uap->im, uap, REG_IMSC);
 	}
@@ -1026,8 +1023,8 @@ static void pl011_dma_rx_callback(void *data)
 	 * get some IRQ immediately from RX.
 	 */
 	if (ret) {
-		dev_dbg(uap->port.dev, "could not retrigger RX DMA job "
-			"fall back to interrupt mode\n");
+		dev_dbg(uap->port.dev,
+			"could not retrigger RX DMA job fall back to interrupt mode\n");
 		uap->im |= UART011_RXIM;
 		pl011_write(uap->im, uap, REG_IMSC);
 	}
@@ -1072,7 +1069,7 @@ static void pl011_dma_rx_poll(struct timer_list *t)
 		dmataken = dbuf->len - dmarx->last_residue;
 		size = dmarx->last_residue - state.residue;
 		dma_count = tty_insert_flip_string(port, dbuf->buf + dmataken,
-				size);
+						   size);
 		if (dma_count == size)
 			dmarx->last_residue =  state.residue;
 		dmarx->last_jiffies = jiffies;
@@ -1085,7 +1082,6 @@ static void pl011_dma_rx_poll(struct timer_list *t)
 	 */
 	if (jiffies_to_msecs(jiffies - dmarx->last_jiffies)
 			> uap->dmarx.poll_timeout) {
-
 		uart_port_lock_irqsave(&uap->port, &flags);
 		pl011_dma_rx_stop(uap);
 		uap->im |= UART011_RXIM;
@@ -1097,7 +1093,7 @@ static void pl011_dma_rx_poll(struct timer_list *t)
 		del_timer(&uap->dmarx.timer);
 	} else {
 		mod_timer(&uap->dmarx.timer,
-			jiffies + msecs_to_jiffies(uap->dmarx.poll_rate));
+			  jiffies + msecs_to_jiffies(uap->dmarx.poll_rate));
 	}
 }
 
@@ -1113,7 +1109,6 @@ static void pl011_dma_startup(struct uart_amba_port *uap)
 
 	uap->dmatx.buf = kmalloc(PL011_DMA_BUFFER_SIZE, GFP_KERNEL | __GFP_DMA);
 	if (!uap->dmatx.buf) {
-		dev_err(uap->port.dev, "no memory for DMA TX buffer\n");
 		uap->port.fifosize = uap->fifosize;
 		return;
 	}
@@ -1129,7 +1124,7 @@ static void pl011_dma_startup(struct uart_amba_port *uap)
 
 	/* Allocate and map DMA RX buffers */
 	ret = pl011_dmabuf_init(uap->dmarx.chan, &uap->dmarx.dbuf_a,
-			       DMA_FROM_DEVICE);
+				DMA_FROM_DEVICE);
 	if (ret) {
 		dev_err(uap->port.dev, "failed to init DMA %s: %d\n",
 			"RX buffer A", ret);
@@ -1137,12 +1132,12 @@ static void pl011_dma_startup(struct uart_amba_port *uap)
 	}
 
 	ret = pl011_dmabuf_init(uap->dmarx.chan, &uap->dmarx.dbuf_b,
-			       DMA_FROM_DEVICE);
+				DMA_FROM_DEVICE);
 	if (ret) {
 		dev_err(uap->port.dev, "failed to init DMA %s: %d\n",
 			"RX buffer B", ret);
 		pl011_dmabuf_free(uap->dmarx.chan, &uap->dmarx.dbuf_a,
-				 DMA_FROM_DEVICE);
+				  DMA_FROM_DEVICE);
 		goto skip_rx;
 	}
 
@@ -1164,13 +1159,12 @@ skip_rx:
 
 	if (uap->using_rx_dma) {
 		if (pl011_dma_rx_trigger_dma(uap))
-			dev_dbg(uap->port.dev, "could not trigger initial "
-				"RX DMA job, fall back to interrupt mode\n");
+			dev_dbg(uap->port.dev,
+				"could not trigger initial RX DMA job, fall back to interrupt mode\n");
 		if (uap->dmarx.poll_rate) {
 			timer_setup(&uap->dmarx.timer, pl011_dma_rx_poll, 0);
 			mod_timer(&uap->dmarx.timer,
-				jiffies +
-				msecs_to_jiffies(uap->dmarx.poll_rate));
+				  jiffies + msecs_to_jiffies(uap->dmarx.poll_rate));
 			uap->dmarx.last_residue = PL011_DMA_BUFFER_SIZE;
 			uap->dmarx.last_jiffies = jiffies;
 		}
@@ -1389,8 +1383,8 @@ static void pl011_stop_rx(struct uart_port *port)
 	struct uart_amba_port *uap =
 	    container_of(port, struct uart_amba_port, port);
 
-	uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM|
-		     UART011_PEIM|UART011_BEIM|UART011_OEIM);
+	uap->im &= ~(UART011_RXIM | UART011_RTIM | UART011_FEIM |
+		     UART011_PEIM | UART011_BEIM | UART011_OEIM);
 	pl011_write(uap->im, uap, REG_IMSC);
 
 	pl011_dma_rx_stop(uap);
@@ -1410,7 +1404,7 @@ static void pl011_enable_ms(struct uart_port *port)
 	struct uart_amba_port *uap =
 	    container_of(port, struct uart_amba_port, port);
 
-	uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM;
+	uap->im |= UART011_RIMIM | UART011_CTSMIM | UART011_DCDMIM | UART011_DSRMIM;
 	pl011_write(uap->im, uap, REG_IMSC);
 }
 
@@ -1428,8 +1422,8 @@ __acquires(&uap->port.lock)
 	 */
 	if (pl011_dma_rx_available(uap)) {
 		if (pl011_dma_rx_trigger_dma(uap)) {
-			dev_dbg(uap->port.dev, "could not trigger RX DMA job "
-				"fall back to interrupt mode again\n");
+			dev_dbg(uap->port.dev,
+				"could not trigger RX DMA job fall back to interrupt mode again\n");
 			uap->im |= UART011_RXIM;
 			pl011_write(uap->im, uap, REG_IMSC);
 		} else {
@@ -1439,8 +1433,7 @@ __acquires(&uap->port.lock)
 				uap->dmarx.last_jiffies = jiffies;
 				uap->dmarx.last_residue	= PL011_DMA_BUFFER_SIZE;
 				mod_timer(&uap->dmarx.timer,
-					jiffies +
-					msecs_to_jiffies(uap->dmarx.poll_rate));
+					  jiffies + msecs_to_jiffies(uap->dmarx.poll_rate));
 			}
 #endif
 		}
@@ -1557,18 +1550,17 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
 		do {
 			check_apply_cts_event_workaround(uap);
 
-			pl011_write(status & ~(UART011_TXIS|UART011_RTIS|
-					       UART011_RXIS),
+			pl011_write(status & ~(UART011_TXIS | UART011_RTIS | UART011_RXIS),
 				    uap, REG_ICR);
 
-			if (status & (UART011_RTIS|UART011_RXIS)) {
+			if (status & (UART011_RTIS | UART011_RXIS)) {
 				if (pl011_dma_rx_running(uap))
 					pl011_dma_rx_irq(uap);
 				else
 					pl011_rx_chars(uap);
 			}
-			if (status & (UART011_DSRMIS|UART011_DCDMIS|
-				      UART011_CTSMIS|UART011_RIMIS))
+			if (status & (UART011_DSRMIS | UART011_DCDMIS |
+				      UART011_CTSMIS | UART011_RIMIS))
 				pl011_modem_status(uap);
 			if (status & UART011_TXIS)
 				pl011_tx_chars(uap, true);
@@ -1598,6 +1590,12 @@ static unsigned int pl011_tx_empty(struct uart_port *port)
 							0 : TIOCSER_TEMT;
 }
 
+static void pl011_maybe_set_bit(bool cond, unsigned int *ptr, unsigned int mask)
+{
+	if (cond)
+		*ptr |= mask;
+}
+
 static unsigned int pl011_get_mctrl(struct uart_port *port)
 {
 	struct uart_amba_port *uap =
@@ -1605,18 +1603,22 @@ static unsigned int pl011_get_mctrl(struct uart_port *port)
 	unsigned int result = 0;
 	unsigned int status = pl011_read(uap, REG_FR);
 
-#define TIOCMBIT(uartbit, tiocmbit)	\
-	if (status & uartbit)		\
-		result |= tiocmbit
+	pl011_maybe_set_bit(status & UART01x_FR_DCD, &result, TIOCM_CAR);
+	pl011_maybe_set_bit(status & uap->vendor->fr_dsr, &result, TIOCM_DSR);
+	pl011_maybe_set_bit(status & uap->vendor->fr_cts, &result, TIOCM_CTS);
+	pl011_maybe_set_bit(status & uap->vendor->fr_ri, &result, TIOCM_RNG);
 
-	TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR);
-	TIOCMBIT(uap->vendor->fr_dsr, TIOCM_DSR);
-	TIOCMBIT(uap->vendor->fr_cts, TIOCM_CTS);
-	TIOCMBIT(uap->vendor->fr_ri, TIOCM_RNG);
-#undef TIOCMBIT
 	return result;
 }
 
+static void pl011_assign_bit(bool cond, unsigned int *ptr, unsigned int mask)
+{
+	if (cond)
+		*ptr |= mask;
+	else
+		*ptr &= ~mask;
+}
+
 static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
 	struct uart_amba_port *uap =
@@ -1625,23 +1627,16 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
 
 	cr = pl011_read(uap, REG_CR);
 
-#define	TIOCMBIT(tiocmbit, uartbit)		\
-	if (mctrl & tiocmbit)		\
-		cr |= uartbit;		\
-	else				\
-		cr &= ~uartbit
-
-	TIOCMBIT(TIOCM_RTS, UART011_CR_RTS);
-	TIOCMBIT(TIOCM_DTR, UART011_CR_DTR);
-	TIOCMBIT(TIOCM_OUT1, UART011_CR_OUT1);
-	TIOCMBIT(TIOCM_OUT2, UART011_CR_OUT2);
-	TIOCMBIT(TIOCM_LOOP, UART011_CR_LBE);
+	pl011_assign_bit(mctrl & TIOCM_RTS, &cr, UART011_CR_RTS);
+	pl011_assign_bit(mctrl & TIOCM_DTR, &cr, UART011_CR_DTR);
+	pl011_assign_bit(mctrl & TIOCM_OUT1, &cr, UART011_CR_OUT1);
+	pl011_assign_bit(mctrl & TIOCM_OUT2, &cr, UART011_CR_OUT2);
+	pl011_assign_bit(mctrl & TIOCM_LOOP, &cr, UART011_CR_LBE);
 
 	if (port->status & UPSTAT_AUTORTS) {
 		/* We need to disable auto-RTS if we want to turn RTS off */
-		TIOCMBIT(TIOCM_RTS, UART011_CR_RTSEN);
+		pl011_assign_bit(mctrl & TIOCM_RTS, &cr, UART011_CR_RTSEN);
 	}
-#undef TIOCMBIT
 
 	pl011_write(cr, uap, REG_CR);
 }
@@ -1707,8 +1702,7 @@ static int pl011_get_poll_char(struct uart_port *port)
 	return pl011_read(uap, REG_DR);
 }
 
-static void pl011_put_poll_char(struct uart_port *port,
-			 unsigned char ch)
+static void pl011_put_poll_char(struct uart_port *port, unsigned char ch)
 {
 	struct uart_amba_port *uap =
 	    container_of(port, struct uart_amba_port, port);
@@ -1909,14 +1903,13 @@ static int sbsa_uart_startup(struct uart_port *port)
 	return 0;
 }
 
-static void pl011_shutdown_channel(struct uart_amba_port *uap,
-					unsigned int lcrh)
+static void pl011_shutdown_channel(struct uart_amba_port *uap, unsigned int lcrh)
 {
-      unsigned long val;
+	unsigned long val;
 
-      val = pl011_read(uap, lcrh);
-      val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
-      pl011_write(val, uap, lcrh);
+	val = pl011_read(uap, lcrh);
+	val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
+	pl011_write(val, uap, lcrh);
 }
 
 /*
@@ -2065,7 +2058,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 		uap->dmarx.poll_rate = DIV_ROUND_UP(10000000, baud);
 #endif
 
-	if (baud > port->uartclk/16)
+	if (baud > port->uartclk / 16)
 		quot = DIV_ROUND_CLOSEST(port->uartclk * 8, baud);
 	else
 		quot = DIV_ROUND_CLOSEST(port->uartclk * 4, baud);
@@ -2147,9 +2140,9 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 	 * else we see data corruption.
 	 */
 	if (uap->vendor->oversampling) {
-		if ((baud >= 3000000) && (baud < 3250000) && (quot > 1))
+		if (baud >= 3000000 && baud < 3250000 && quot > 1)
 			quot -= 1;
-		else if ((baud > 3250000) && (quot > 2))
+		else if (baud > 3250000 && quot > 2)
 			quot -= 2;
 	}
 	/* Set baud rate */
@@ -2218,13 +2211,14 @@ static void pl011_config_port(struct uart_port *port, int flags)
 static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
 	int ret = 0;
+
 	if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA)
 		ret = -EINVAL;
 	if (ser->irq < 0 || ser->irq >= nr_irqs)
 		ret = -EINVAL;
 	if (ser->baud_base < 9600)
 		ret = -EINVAL;
-	if (port->mapbase != (unsigned long) ser->iomem_base)
+	if (port->mapbase != (unsigned long)ser->iomem_base)
 		ret = -EINVAL;
 	return ret;
 }
@@ -2369,35 +2363,34 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
 static void pl011_console_get_options(struct uart_amba_port *uap, int *baud,
 				      int *parity, int *bits)
 {
-	if (pl011_read(uap, REG_CR) & UART01x_CR_UARTEN) {
-		unsigned int lcr_h, ibrd, fbrd;
+	unsigned int lcr_h, ibrd, fbrd;
 
-		lcr_h = pl011_read(uap, REG_LCRH_TX);
+	if (!(pl011_read(uap, REG_CR) & UART01x_CR_UARTEN))
+		return;
 
-		*parity = 'n';
-		if (lcr_h & UART01x_LCRH_PEN) {
-			if (lcr_h & UART01x_LCRH_EPS)
-				*parity = 'e';
-			else
-				*parity = 'o';
-		}
+	lcr_h = pl011_read(uap, REG_LCRH_TX);
 
-		if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7)
-			*bits = 7;
+	*parity = 'n';
+	if (lcr_h & UART01x_LCRH_PEN) {
+		if (lcr_h & UART01x_LCRH_EPS)
+			*parity = 'e';
 		else
-			*bits = 8;
+			*parity = 'o';
+	}
+
+	if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7)
+		*bits = 7;
+	else
+		*bits = 8;
 
-		ibrd = pl011_read(uap, REG_IBRD);
-		fbrd = pl011_read(uap, REG_FBRD);
+	ibrd = pl011_read(uap, REG_IBRD);
+	fbrd = pl011_read(uap, REG_FBRD);
 
-		*baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
+	*baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
 
-		if (uap->vendor->oversampling) {
-			if (pl011_read(uap, REG_CR)
-				  & ST_UART011_CR_OVSFACT)
-				*baud *= 2;
-		}
-	}
+	if (uap->vendor->oversampling &&
+	    (pl011_read(uap, REG_CR) & ST_UART011_CR_OVSFACT))
+		*baud *= 2;
 }
 
 static int pl011_console_setup(struct console *co, char *options)
@@ -2533,7 +2526,7 @@ static void qdf2400_e44_putc(struct uart_port *port, unsigned char c)
 		cpu_relax();
 }
 
-static void qdf2400_e44_early_write(struct console *con, const char *s, unsigned n)
+static void qdf2400_e44_early_write(struct console *con, const char *s, unsigned int n)
 {
 	struct earlycon_device *dev = con->data;
 
@@ -2552,7 +2545,7 @@ static void pl011_putc(struct uart_port *port, unsigned char c)
 		cpu_relax();
 }
 
-static void pl011_early_write(struct console *con, const char *s, unsigned n)
+static void pl011_early_write(struct console *con, const char *s, unsigned int n)
 {
 	struct earlycon_device *dev = con->data;
 
@@ -2613,7 +2606,9 @@ static int __init pl011_early_console_setup(struct earlycon_device *device,
 
 	return 0;
 }
+
 OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup);
+
 OF_EARLYCON_DECLARE(pl011, "arm,sbsa-uart", pl011_early_console_setup);
 
 /*
@@ -2636,6 +2631,7 @@ qdf2400_e44_early_console_setup(struct earlycon_device *device,
 	device->con->write = qdf2400_e44_early_write;
 	return 0;
 }
+
 EARLYCON_DECLARE(qdf2400_e44, qdf2400_e44_early_console_setup);
 
 #else
@@ -2655,8 +2651,8 @@ static struct uart_driver amba_reg = {
 static int pl011_probe_dt_alias(int index, struct device *dev)
 {
 	struct device_node *np;
-	static bool seen_dev_with_alias = false;
-	static bool seen_dev_without_alias = false;
+	static bool seen_dev_with_alias;
+	static bool seen_dev_without_alias;
 	int ret = index;
 
 	if (!IS_ENABLED(CONFIG_OF))
@@ -2672,7 +2668,7 @@ static int pl011_probe_dt_alias(int index, struct device *dev)
 		ret = index;
 	} else {
 		seen_dev_with_alias = true;
-		if (ret >= ARRAY_SIZE(amba_ports) || amba_ports[ret] != NULL) {
+		if (ret >= ARRAY_SIZE(amba_ports) || amba_ports[ret]) {
 			dev_warn(dev, "requested serial port %d  not available.\n", ret);
 			ret = index;
 		}
@@ -2706,7 +2702,7 @@ static int pl011_find_free_port(void)
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
-		if (amba_ports[i] == NULL)
+		if (!amba_ports[i])
 			return i;
 
 	return -EBUSY;
@@ -2873,6 +2869,22 @@ static int pl011_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(pl011_dev_pm_ops, pl011_suspend, pl011_resume);
 
+#ifdef CONFIG_ACPI_SPCR_TABLE
+static void qpdf2400_erratum44_workaround(struct device *dev,
+					  struct uart_amba_port *uap)
+{
+	if (!qdf2400_e44_present)
+		return;
+
+	dev_info(dev, "working around QDF2400 SoC erratum 44\n");
+	uap->vendor = &vendor_qdt_qdf2400_e44;
+}
+#else
+static void qpdf2400_erratum44_workaround(struct device *dev,
+					  struct uart_amba_port *uap)
+{ /* empty */ }
+#endif
+
 static int sbsa_uart_probe(struct platform_device *pdev)
 {
 	struct uart_amba_port *uap;
@@ -2908,13 +2920,8 @@ static int sbsa_uart_probe(struct platform_device *pdev)
 		return ret;
 	uap->port.irq	= ret;
 
-#ifdef CONFIG_ACPI_SPCR_TABLE
-	if (qdf2400_e44_present) {
-		dev_info(&pdev->dev, "working around QDF2400 SoC erratum 44\n");
-		uap->vendor = &vendor_qdt_qdf2400_e44;
-	} else
-#endif
-		uap->vendor = &vendor_sbsa;
+	uap->vendor = &vendor_sbsa;
+	qpdf2400_erratum44_workaround(&pdev->dev, uap);
 
 	uap->reg_offset	= uap->vendor->reg_offset;
 	uap->fifosize	= 32;
@@ -2935,13 +2942,12 @@ static int sbsa_uart_probe(struct platform_device *pdev)
 	return pl011_register_port(uap);
 }
 
-static int sbsa_uart_remove(struct platform_device *pdev)
+static void sbsa_uart_remove(struct platform_device *pdev)
 {
 	struct uart_amba_port *uap = platform_get_drvdata(pdev);
 
 	uart_remove_one_port(&amba_reg, &uap->port);
 	pl011_unregister_port(uap);
-	return 0;
 }
 
 static const struct of_device_id sbsa_uart_of_match[] = {
@@ -2959,7 +2965,7 @@ MODULE_DEVICE_TABLE(acpi, sbsa_uart_acpi_match);
 
 static struct platform_driver arm_sbsa_uart_platform_driver = {
 	.probe		= sbsa_uart_probe,
-	.remove		= sbsa_uart_remove,
+	.remove_new	= sbsa_uart_remove,
 	.driver	= {
 		.name	= "sbsa-uart",
 		.pm	= &pl011_dev_pm_ops,
@@ -2998,7 +3004,7 @@ static struct amba_driver pl011_driver = {
 
 static int __init pl011_init(void)
 {
-	printk(KERN_INFO "Serial: AMBA PL011 UART driver\n");
+	pr_info("Serial: AMBA PL011 UART driver\n");
 
 	if (platform_driver_register(&arm_sbsa_uart_platform_driver))
 		pr_warn("could not register SBSA UART platform driver\n");
diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c
index ffd2346731..8d09ace062 100644
--- a/drivers/tty/serial/ar933x_uart.c
+++ b/drivers/tty/serial/ar933x_uart.c
@@ -818,7 +818,7 @@ err_disable_clk:
 	return ret;
 }
 
-static int ar933x_uart_remove(struct platform_device *pdev)
+static void ar933x_uart_remove(struct platform_device *pdev)
 {
 	struct ar933x_uart_port *up;
 
@@ -828,8 +828,6 @@ static int ar933x_uart_remove(struct platform_device *pdev)
 		uart_remove_one_port(&ar933x_uart_driver, &up->port);
 		clk_disable_unprepare(up->clk);
 	}
-
-	return 0;
 }
 
 #ifdef CONFIG_OF
@@ -842,7 +840,7 @@ MODULE_DEVICE_TABLE(of, ar933x_uart_of_ids);
 
 static struct platform_driver ar933x_uart_platform_driver = {
 	.probe		= ar933x_uart_probe,
-	.remove		= ar933x_uart_remove,
+	.remove_new	= ar933x_uart_remove,
 	.driver		= {
 		.name		= DRIVER_NAME,
 		.of_match_table = of_match_ptr(ar933x_uart_of_ids),
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 1946fafc3f..85667f7095 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1013,14 +1013,18 @@ static int atmel_prepare_tx_dma(struct uart_port *port)
 	struct device *mfd_dev = port->dev->parent;
 	dma_cap_mask_t		mask;
 	struct dma_slave_config config;
+	struct dma_chan *chan;
 	int ret, nent;
 
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_SLAVE, mask);
 
-	atmel_port->chan_tx = dma_request_slave_channel(mfd_dev, "tx");
-	if (atmel_port->chan_tx == NULL)
+	chan = dma_request_chan(mfd_dev, "tx");
+	if (IS_ERR(chan)) {
+		atmel_port->chan_tx = NULL;
 		goto chan_err;
+	}
+	atmel_port->chan_tx = chan;
 	dev_info(port->dev, "using %s for tx DMA transfers\n",
 		dma_chan_name(atmel_port->chan_tx));
 
@@ -1188,6 +1192,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
 	dma_cap_mask_t		mask;
 	struct dma_slave_config config;
 	struct circ_buf		*ring;
+	struct dma_chan *chan;
 	int ret, nent;
 
 	ring = &atmel_port->rx_ring;
@@ -1195,9 +1200,12 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_CYCLIC, mask);
 
-	atmel_port->chan_rx = dma_request_slave_channel(mfd_dev, "rx");
-	if (atmel_port->chan_rx == NULL)
+	chan = dma_request_chan(mfd_dev, "rx");
+	if (IS_ERR(chan)) {
+		atmel_port->chan_rx = NULL;
 		goto chan_err;
+	}
+	atmel_port->chan_rx = chan;
 	dev_info(port->dev, "using %s for rx DMA transfers\n",
 		dma_chan_name(atmel_port->chan_rx));
 
@@ -3001,7 +3009,7 @@ err:
  * protocol that needs bitbanging on IO lines, but use the regular serial
  * port in the normal case.
  */
-static int atmel_serial_remove(struct platform_device *pdev)
+static void atmel_serial_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = platform_get_drvdata(pdev);
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
@@ -3020,8 +3028,6 @@ static int atmel_serial_remove(struct platform_device *pdev)
 	clear_bit(port->line, atmel_ports_in_use);
 
 	pdev->dev.of_node = NULL;
-
-	return 0;
 }
 
 static SIMPLE_DEV_PM_OPS(atmel_serial_pm_ops, atmel_serial_suspend,
@@ -3029,7 +3035,7 @@ static SIMPLE_DEV_PM_OPS(atmel_serial_pm_ops, atmel_serial_suspend,
 
 static struct platform_driver atmel_serial_driver = {
 	.probe		= atmel_serial_probe,
-	.remove		= atmel_serial_remove,
+	.remove_new	= atmel_serial_remove,
 	.driver		= {
 		.name			= "atmel_usart_serial",
 		.of_match_table		= of_match_ptr(atmel_serial_dt_ids),
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index 4a08fd5ee6..a3cefa1534 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -868,7 +868,7 @@ static int bcm_uart_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int bcm_uart_remove(struct platform_device *pdev)
+static void bcm_uart_remove(struct platform_device *pdev)
 {
 	struct uart_port *port;
 
@@ -876,7 +876,6 @@ static int bcm_uart_remove(struct platform_device *pdev)
 	uart_remove_one_port(&bcm_uart_driver, port);
 	/* mark port as free */
 	ports[pdev->id].membase = NULL;
-	return 0;
 }
 
 static const struct of_device_id bcm63xx_of_match[] = {
@@ -890,7 +889,7 @@ MODULE_DEVICE_TABLE(of, bcm63xx_of_match);
  */
 static struct platform_driver bcm_uart_platform_driver = {
 	.probe	= bcm_uart_probe,
-	.remove	= bcm_uart_remove,
+	.remove_new = bcm_uart_remove,
 	.driver	= {
 		.name  = "bcm63xx_uart",
 		.of_match_table = bcm63xx_of_match,
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index 55d19937ef..7927725b89 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -510,13 +510,11 @@ static int uart_clps711x_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int uart_clps711x_remove(struct platform_device *pdev)
+static void uart_clps711x_remove(struct platform_device *pdev)
 {
 	struct clps711x_port *s = platform_get_drvdata(pdev);
 
 	uart_remove_one_port(&clps711x_uart, &s->port);
-
-	return 0;
 }
 
 static const struct of_device_id __maybe_unused clps711x_uart_dt_ids[] = {
@@ -531,7 +529,7 @@ static struct platform_driver clps711x_uart_platform = {
 		.of_match_table	= of_match_ptr(clps711x_uart_dt_ids),
 	},
 	.probe	= uart_clps711x_probe,
-	.remove	= uart_clps711x_remove,
+	.remove_new = uart_clps711x_remove,
 };
 
 static int __init uart_clps711x_init(void)
diff --git a/drivers/tty/serial/cpm_uart.c b/drivers/tty/serial/cpm_uart.c
index be4af6eda4..df56c6c5af 100644
--- a/drivers/tty/serial/cpm_uart.c
+++ b/drivers/tty/serial/cpm_uart.c
@@ -1549,13 +1549,11 @@ static int cpm_uart_probe(struct platform_device *ofdev)
 	return ret;
 }
 
-static int cpm_uart_remove(struct platform_device *ofdev)
+static void cpm_uart_remove(struct platform_device *ofdev)
 {
 	struct uart_cpm_port *pinfo = platform_get_drvdata(ofdev);
 
 	uart_remove_one_port(&cpm_reg, &pinfo->port);
-
-	return 0;
 }
 
 static const struct of_device_id cpm_uart_match[] = {
@@ -1581,7 +1579,7 @@ static struct platform_driver cpm_uart_driver = {
 		.of_match_table = cpm_uart_match,
 	},
 	.probe = cpm_uart_probe,
-	.remove = cpm_uart_remove,
+	.remove_new = cpm_uart_remove,
  };
 
 static int __init cpm_uart_init(void)
diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c
index 5004125f30..e419c4bde8 100644
--- a/drivers/tty/serial/digicolor-usart.c
+++ b/drivers/tty/serial/digicolor-usart.c
@@ -503,13 +503,11 @@ static int digicolor_uart_probe(struct platform_device *pdev)
 	return uart_add_one_port(&digicolor_uart, &dp->port);
 }
 
-static int digicolor_uart_remove(struct platform_device *pdev)
+static void digicolor_uart_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = platform_get_drvdata(pdev);
 
 	uart_remove_one_port(&digicolor_uart, port);
-
-	return 0;
 }
 
 static const struct of_device_id digicolor_uart_dt_ids[] = {
@@ -524,7 +522,7 @@ static struct platform_driver digicolor_uart_platform = {
 		.of_match_table	= of_match_ptr(digicolor_uart_dt_ids),
 	},
 	.probe	= digicolor_uart_probe,
-	.remove	= digicolor_uart_remove,
+	.remove_new = digicolor_uart_remove,
 };
 
 static int __init digicolor_uart_init(void)
diff --git a/drivers/tty/serial/earlycon-riscv-sbi.c b/drivers/tty/serial/earlycon-riscv-sbi.c
index 27afb0b74e..0162155f0c 100644
--- a/drivers/tty/serial/earlycon-riscv-sbi.c
+++ b/drivers/tty/serial/earlycon-riscv-sbi.c
@@ -15,17 +15,38 @@ static void sbi_putc(struct uart_port *port, unsigned char c)
 	sbi_console_putchar(c);
 }
 
-static void sbi_console_write(struct console *con,
-			      const char *s, unsigned n)
+static void sbi_0_1_console_write(struct console *con,
+				  const char *s, unsigned int n)
 {
 	struct earlycon_device *dev = con->data;
 	uart_console_write(&dev->port, s, n, sbi_putc);
 }
 
+static void sbi_dbcn_console_write(struct console *con,
+				   const char *s, unsigned int n)
+{
+	int ret;
+
+	while (n) {
+		ret = sbi_debug_console_write(s, n);
+		if (ret < 0)
+			break;
+
+		s += ret;
+		n -= ret;
+	}
+}
+
 static int __init early_sbi_setup(struct earlycon_device *device,
 				  const char *opt)
 {
-	device->con->write = sbi_console_write;
+	if (sbi_debug_console_available)
+		device->con->write = sbi_dbcn_console_write;
+	else if (IS_ENABLED(CONFIG_RISCV_SBI_V01))
+		device->con->write = sbi_0_1_console_write;
+	else
+		return -ENODEV;
+
 	return 0;
 }
 EARLYCON_DECLARE(sbi, early_sbi_setup);
diff --git a/drivers/tty/serial/esp32_acm.c b/drivers/tty/serial/esp32_acm.c
index cb28a87736..d4e8bdb1cd 100644
--- a/drivers/tty/serial/esp32_acm.c
+++ b/drivers/tty/serial/esp32_acm.c
@@ -8,7 +8,7 @@
 #include <linux/irq.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/slab.h>
 #include <linux/tty_flip.h>
@@ -413,18 +413,17 @@ static int esp32s3_acm_probe(struct platform_device *pdev)
 	return uart_add_one_port(&esp32s3_acm_reg, port);
 }
 
-static int esp32s3_acm_remove(struct platform_device *pdev)
+static void esp32s3_acm_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = platform_get_drvdata(pdev);
 
 	uart_remove_one_port(&esp32s3_acm_reg, port);
-	return 0;
 }
 
 
 static struct platform_driver esp32s3_acm_driver = {
 	.probe		= esp32s3_acm_probe,
-	.remove		= esp32s3_acm_remove,
+	.remove_new	= esp32s3_acm_remove,
 	.driver		= {
 		.name	= DRIVER_NAME,
 		.of_match_table	= esp32s3_acm_dt_ids,
diff --git a/drivers/tty/serial/esp32_uart.c b/drivers/tty/serial/esp32_uart.c
index 85c9c5ad7c..6fc61f3233 100644
--- a/drivers/tty/serial/esp32_uart.c
+++ b/drivers/tty/serial/esp32_uart.c
@@ -9,7 +9,8 @@
 #include <linux/irq.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/serial_core.h>
 #include <linux/slab.h>
 #include <linux/tty_flip.h>
@@ -678,16 +679,11 @@ static struct uart_driver esp32_uart_reg = {
 static int esp32_uart_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
-	static const struct of_device_id *match;
 	struct uart_port *port;
 	struct esp32_port *sport;
 	struct resource *res;
 	int ret;
 
-	match = of_match_device(esp32_uart_dt_ids, &pdev->dev);
-	if (!match)
-		return -ENODEV;
-
 	sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL);
 	if (!sport)
 		return -ENOMEM;
@@ -728,7 +724,7 @@ static int esp32_uart_probe(struct platform_device *pdev)
 	port->flags = UPF_BOOT_AUTOCONF;
 	port->has_sysrq = 1;
 	port->fifosize = ESP32_UART_TX_FIFO_SIZE;
-	port->private_data = (void *)match->data;
+	port->private_data = (void *)device_get_match_data(&pdev->dev);
 
 	esp32_uart_ports[port->line] = sport;
 
@@ -737,19 +733,17 @@ static int esp32_uart_probe(struct platform_device *pdev)
 	return uart_add_one_port(&esp32_uart_reg, port);
 }
 
-static int esp32_uart_remove(struct platform_device *pdev)
+static void esp32_uart_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = platform_get_drvdata(pdev);
 
 	uart_remove_one_port(&esp32_uart_reg, port);
-
-	return 0;
 }
 
 
 static struct platform_driver esp32_uart_driver = {
 	.probe		= esp32_uart_probe,
-	.remove		= esp32_uart_remove,
+	.remove_new	= esp32_uart_remove,
 	.driver		= {
 		.name	= DRIVER_NAME,
 		.of_match_table	= esp32_uart_dt_ids,
diff --git a/drivers/tty/serial/fsl_linflexuart.c b/drivers/tty/serial/fsl_linflexuart.c
index 3bdaf1ddc3..52c87876a8 100644
--- a/drivers/tty/serial/fsl_linflexuart.c
+++ b/drivers/tty/serial/fsl_linflexuart.c
@@ -851,13 +851,11 @@ static int linflex_probe(struct platform_device *pdev)
 	return uart_add_one_port(&linflex_reg, sport);
 }
 
-static int linflex_remove(struct platform_device *pdev)
+static void linflex_remove(struct platform_device *pdev)
 {
 	struct uart_port *sport = platform_get_drvdata(pdev);
 
 	uart_remove_one_port(&linflex_reg, sport);
-
-	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -884,7 +882,7 @@ static SIMPLE_DEV_PM_OPS(linflex_pm_ops, linflex_suspend, linflex_resume);
 
 static struct platform_driver linflex_driver = {
 	.probe		= linflex_probe,
-	.remove		= linflex_remove,
+	.remove_new	= linflex_remove,
 	.driver		= {
 		.name	= DRIVER_NAME,
 		.of_match_table	= linflex_dt_ids,
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 71d0cbd748..bbcbc91482 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -2962,7 +2962,7 @@ failed_reset:
 	return ret;
 }
 
-static int lpuart_remove(struct platform_device *pdev)
+static void lpuart_remove(struct platform_device *pdev)
 {
 	struct lpuart_port *sport = platform_get_drvdata(pdev);
 
@@ -2979,7 +2979,6 @@ static int lpuart_remove(struct platform_device *pdev)
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_set_suspended(&pdev->dev);
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
-	return 0;
 }
 
 static int lpuart_runtime_suspend(struct device *dev)
@@ -3213,7 +3212,7 @@ static const struct dev_pm_ops lpuart_pm_ops = {
 
 static struct platform_driver lpuart_driver = {
 	.probe		= lpuart_probe,
-	.remove		= lpuart_remove,
+	.remove_new	= lpuart_remove,
 	.driver		= {
 		.name	= "fsl-lpuart",
 		.of_match_table = lpuart_dt_ids,
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 5545bf4a79..e148132506 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1350,15 +1350,18 @@ static int imx_uart_dma_init(struct imx_port *sport)
 {
 	struct dma_slave_config slave_config = {};
 	struct device *dev = sport->port.dev;
+	struct dma_chan *chan;
 	int ret;
 
 	/* Prepare for RX : */
-	sport->dma_chan_rx = dma_request_slave_channel(dev, "rx");
-	if (!sport->dma_chan_rx) {
+	chan = dma_request_chan(dev, "rx");
+	if (IS_ERR(chan)) {
 		dev_dbg(dev, "cannot get the DMA channel.\n");
-		ret = -EINVAL;
+		sport->dma_chan_rx = NULL;
+		ret = PTR_ERR(chan);
 		goto err;
 	}
+	sport->dma_chan_rx = chan;
 
 	slave_config.direction = DMA_DEV_TO_MEM;
 	slave_config.src_addr = sport->port.mapbase + URXD0;
@@ -1380,12 +1383,14 @@ static int imx_uart_dma_init(struct imx_port *sport)
 	sport->rx_ring.buf = sport->rx_buf;
 
 	/* Prepare for TX : */
-	sport->dma_chan_tx = dma_request_slave_channel(dev, "tx");
-	if (!sport->dma_chan_tx) {
+	chan = dma_request_chan(dev, "tx");
+	if (IS_ERR(chan)) {
 		dev_err(dev, "cannot get the TX DMA channel!\n");
-		ret = -EINVAL;
+		sport->dma_chan_tx = NULL;
+		ret = PTR_ERR(chan);
 		goto err;
 	}
+	sport->dma_chan_tx = chan;
 
 	slave_config.direction = DMA_MEM_TO_DEV;
 	slave_config.dst_addr = sport->port.mapbase + URTX0;
@@ -2469,13 +2474,11 @@ err_clk:
 	return ret;
 }
 
-static int imx_uart_remove(struct platform_device *pdev)
+static void imx_uart_remove(struct platform_device *pdev)
 {
 	struct imx_port *sport = platform_get_drvdata(pdev);
 
 	uart_remove_one_port(&imx_uart_uart_driver, &sport->port);
-
-	return 0;
 }
 
 static void imx_uart_restore_context(struct imx_port *sport)
@@ -2644,7 +2647,7 @@ static const struct dev_pm_ops imx_uart_pm_ops = {
 
 static struct platform_driver imx_uart_platform_driver = {
 	.probe = imx_uart_probe,
-	.remove = imx_uart_remove,
+	.remove_new = imx_uart_remove,
 
 	.driver = {
 		.name = "imx-uart",
diff --git a/drivers/tty/serial/jsm/jsm.h b/drivers/tty/serial/jsm/jsm.h
index 8489c07f4c..df55e5dc5a 100644
--- a/drivers/tty/serial/jsm/jsm.h
+++ b/drivers/tty/serial/jsm/jsm.h
@@ -115,8 +115,6 @@ struct board_ops {
 	void (*send_start_character)(struct jsm_channel *ch);
 	void (*send_stop_character)(struct jsm_channel *ch);
 	void (*copy_data_from_queue_to_uart)(struct jsm_channel *ch);
-	u32 (*get_uart_bytes_left)(struct jsm_channel *ch);
-	void (*send_immediate_char)(struct jsm_channel *ch, unsigned char);
 };
 
 
@@ -127,7 +125,6 @@ struct jsm_board
 {
 	int		boardnum;	/* Board number: 0-32 */
 
-	int		type;		/* Type of board */
 	u8		rev;		/* PCI revision ID */
 	struct pci_dev	*pci_dev;
 	u32		maxports;	/* MAX ports this board can handle */
@@ -155,8 +152,6 @@ struct jsm_board
 	u32		bd_dividend;	/* Board/UARTs specific dividend */
 
 	struct board_ops *bd_ops;
-
-	struct list_head jsm_board_entry;
 };
 
 /************************************************************************
diff --git a/drivers/tty/serial/jsm/jsm_cls.c b/drivers/tty/serial/jsm/jsm_cls.c
index 3fd57ac3ad..1eda48964c 100644
--- a/drivers/tty/serial/jsm/jsm_cls.c
+++ b/drivers/tty/serial/jsm/jsm_cls.c
@@ -878,28 +878,6 @@ static void cls_uart_off(struct jsm_channel *ch)
 }
 
 /*
- * cls_get_uarts_bytes_left.
- * Returns 0 is nothing left in the FIFO, returns 1 otherwise.
- *
- * The channel lock MUST be held by the calling function.
- */
-static u32 cls_get_uart_bytes_left(struct jsm_channel *ch)
-{
-	u8 left = 0;
-	u8 lsr = readb(&ch->ch_cls_uart->lsr);
-
-	/* Determine whether the Transmitter is empty or not */
-	if (!(lsr & UART_LSR_TEMT))
-		left = 1;
-	else {
-		ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
-		left = 0;
-	}
-
-	return left;
-}
-
-/*
  * cls_send_break.
  * Starts sending a break thru the UART.
  *
@@ -916,18 +894,6 @@ static void cls_send_break(struct jsm_channel *ch)
 	}
 }
 
-/*
- * cls_send_immediate_char.
- * Sends a specific character as soon as possible to the UART,
- * jumping over any bytes that might be in the write queue.
- *
- * The channel lock MUST be held by the calling function.
- */
-static void cls_send_immediate_char(struct jsm_channel *ch, unsigned char c)
-{
-	writeb(c, &ch->ch_cls_uart->txrx);
-}
-
 struct board_ops jsm_cls_ops = {
 	.intr =				cls_intr,
 	.uart_init =			cls_uart_init,
@@ -943,7 +909,5 @@ struct board_ops jsm_cls_ops = {
 	.send_start_character =		cls_send_start_character,
 	.send_stop_character =		cls_send_stop_character,
 	.copy_data_from_queue_to_uart = cls_copy_data_from_queue_to_uart,
-	.get_uart_bytes_left =		cls_get_uart_bytes_left,
-	.send_immediate_char =		cls_send_immediate_char
 };
 
diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c
index 2bd6404289..1fa10f1936 100644
--- a/drivers/tty/serial/jsm/jsm_neo.c
+++ b/drivers/tty/serial/jsm/jsm_neo.c
@@ -1309,25 +1309,6 @@ static void neo_uart_off(struct jsm_channel *ch)
 	writeb(0, &ch->ch_neo_uart->ier);
 }
 
-static u32 neo_get_uart_bytes_left(struct jsm_channel *ch)
-{
-	u8 left = 0;
-	u8 lsr = readb(&ch->ch_neo_uart->lsr);
-
-	/* We must cache the LSR as some of the bits get reset once read... */
-	ch->ch_cached_lsr |= lsr;
-
-	/* Determine whether the Transmitter is empty or not */
-	if (!(lsr & UART_LSR_TEMT))
-		left = 1;
-	else {
-		ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
-		left = 0;
-	}
-
-	return left;
-}
-
 /* Channel lock MUST be held by the calling function! */
 static void neo_send_break(struct jsm_channel *ch)
 {
@@ -1348,25 +1329,6 @@ static void neo_send_break(struct jsm_channel *ch)
 	}
 }
 
-/*
- * neo_send_immediate_char.
- *
- * Sends a specific character as soon as possible to the UART,
- * jumping over any bytes that might be in the write queue.
- *
- * The channel lock MUST be held by the calling function.
- */
-static void neo_send_immediate_char(struct jsm_channel *ch, unsigned char c)
-{
-	if (!ch)
-		return;
-
-	writeb(c, &ch->ch_neo_uart->txrx);
-
-	/* flush write operation */
-	neo_pci_posting_flush(ch->ch_bd);
-}
-
 struct board_ops jsm_neo_ops = {
 	.intr				= neo_intr,
 	.uart_init			= neo_uart_init,
@@ -1382,6 +1344,4 @@ struct board_ops jsm_neo_ops = {
 	.send_start_character		= neo_send_start_character,
 	.send_stop_character		= neo_send_stop_character,
 	.copy_data_from_queue_to_uart	= neo_copy_data_from_queue_to_uart,
-	.get_uart_bytes_left		= neo_get_uart_bytes_left,
-	.send_immediate_char		= neo_send_immediate_char
 };
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 3adb60c683..a0731773ce 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -887,13 +887,11 @@ static int lqasc_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int lqasc_remove(struct platform_device *pdev)
+static void lqasc_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = platform_get_drvdata(pdev);
 
 	uart_remove_one_port(&lqasc_reg, port);
-
-	return 0;
 }
 
 static const struct ltq_soc_data soc_data_lantiq = {
@@ -917,7 +915,7 @@ MODULE_DEVICE_TABLE(of, ltq_asc_match);
 
 static struct platform_driver lqasc_driver = {
 	.probe		= lqasc_probe,
-	.remove		= lqasc_remove,
+	.remove_new	= lqasc_remove,
 	.driver		= {
 		.name	= DRVNAME,
 		.of_match_table = ltq_asc_match,
diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c
index a25ab1efe3..3ce369f763 100644
--- a/drivers/tty/serial/liteuart.c
+++ b/drivers/tty/serial/liteuart.c
@@ -336,15 +336,13 @@ err_erase_id:
 	return ret;
 }
 
-static int liteuart_remove(struct platform_device *pdev)
+static void liteuart_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = platform_get_drvdata(pdev);
 	unsigned int line = port->line;
 
 	uart_remove_one_port(&liteuart_driver, port);
 	xa_erase(&liteuart_array, line);
-
-	return 0;
 }
 
 static const struct of_device_id liteuart_of_match[] = {
@@ -355,7 +353,7 @@ MODULE_DEVICE_TABLE(of, liteuart_of_match);
 
 static struct platform_driver liteuart_platform_driver = {
 	.probe = liteuart_probe,
-	.remove = liteuart_remove,
+	.remove_new = liteuart_remove,
 	.driver = {
 		.name = KBUILD_MODNAME,
 		.of_match_table = liteuart_of_match,
diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c
index 5149a947b7..ec20329f06 100644
--- a/drivers/tty/serial/lpc32xx_hs.c
+++ b/drivers/tty/serial/lpc32xx_hs.c
@@ -659,13 +659,11 @@ static int serial_hs_lpc32xx_probe(struct platform_device *pdev)
 /*
  * Remove serial ports registered against a platform device.
  */
-static int serial_hs_lpc32xx_remove(struct platform_device *pdev)
+static void serial_hs_lpc32xx_remove(struct platform_device *pdev)
 {
 	struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev);
 
 	uart_remove_one_port(&lpc32xx_hs_reg, &p->port);
-
-	return 0;
 }
 
 
@@ -702,7 +700,7 @@ MODULE_DEVICE_TABLE(of, serial_hs_lpc32xx_dt_ids);
 
 static struct platform_driver serial_hs_lpc32xx_driver = {
 	.probe		= serial_hs_lpc32xx_probe,
-	.remove		= serial_hs_lpc32xx_remove,
+	.remove_new	= serial_hs_lpc32xx_remove,
 	.suspend	= serial_hs_lpc32xx_suspend,
 	.resume		= serial_hs_lpc32xx_resume,
 	.driver		= {
diff --git a/drivers/tty/serial/ma35d1_serial.c b/drivers/tty/serial/ma35d1_serial.c
index 21b574f78b..19f0a305cc 100644
--- a/drivers/tty/serial/ma35d1_serial.c
+++ b/drivers/tty/serial/ma35d1_serial.c
@@ -558,7 +558,7 @@ static void ma35d1serial_console_write(struct console *co, const char *s, u32 co
 	u32 ier;
 
 	if ((co->index < 0) || (co->index >= MA35_UART_NR)) {
-		pr_warn("Failed to write on ononsole port %x, out of range\n",
+		pr_warn("Failed to write on console port %x, out of range\n",
 			co->index);
 		return;
 	}
@@ -754,14 +754,13 @@ err_iounmap:
 /*
  * Remove serial ports registered against a platform device.
  */
-static int ma35d1serial_remove(struct platform_device *dev)
+static void ma35d1serial_remove(struct platform_device *dev)
 {
 	struct uart_port *port = platform_get_drvdata(dev);
 	struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
 
 	uart_remove_one_port(&ma35d1serial_reg, port);
 	clk_disable_unprepare(up->clk);
-	return 0;
 }
 
 static int ma35d1serial_suspend(struct platform_device *dev, pm_message_t state)
@@ -794,7 +793,7 @@ static int ma35d1serial_resume(struct platform_device *dev)
 
 static struct platform_driver ma35d1serial_driver = {
 	.probe      = ma35d1serial_probe,
-	.remove     = ma35d1serial_remove,
+	.remove_new = ma35d1serial_remove,
 	.suspend    = ma35d1serial_suspend,
 	.resume     = ma35d1serial_resume,
 	.driver     = {
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 1a4bb55652..198413df09 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -796,7 +796,7 @@ static void max310x_handle_tx(struct uart_port *port)
 	to_send = uart_circ_chars_pending(xmit);
 	until_end = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
 	if (likely(to_send)) {
-		/* Limit to size of TX FIFO */
+		/* Limit to space available in TX FIFO */
 		txlen = max310x_port_read(port, MAX310X_TXFIFOLVL_REG);
 		txlen = port->fifosize - txlen;
 		to_send = (to_send > txlen) ? txlen : to_send;
diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index 91b15243f6..8690a45239 100644
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -627,7 +627,7 @@ static int mcf_probe(struct platform_device *pdev)
 
 /****************************************************************************/
 
-static int mcf_remove(struct platform_device *pdev)
+static void mcf_remove(struct platform_device *pdev)
 {
 	struct uart_port *port;
 	int i;
@@ -637,15 +637,13 @@ static int mcf_remove(struct platform_device *pdev)
 		if (port)
 			uart_remove_one_port(&mcf_driver, port);
 	}
-
-	return 0;
 }
 
 /****************************************************************************/
 
 static struct platform_driver mcf_platform_driver = {
 	.probe		= mcf_probe,
-	.remove		= mcf_remove,
+	.remove_new	= mcf_remove,
 	.driver		= {
 		.name	= "mcfuart",
 	},
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 8dd84617e7..8395688f5e 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -795,7 +795,7 @@ static int meson_uart_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int meson_uart_remove(struct platform_device *pdev)
+static void meson_uart_remove(struct platform_device *pdev)
 {
 	struct uart_driver *uart_driver;
 	struct uart_port *port;
@@ -807,12 +807,10 @@ static int meson_uart_remove(struct platform_device *pdev)
 
 	for (int id = 0; id < AML_UART_PORT_NUM; id++)
 		if (meson_ports[id])
-			return 0;
+			return;
 
 	/* No more available uart ports, unregister uart driver */
 	uart_unregister_driver(uart_driver);
-
-	return 0;
 }
 
 static struct meson_uart_data meson_g12a_uart_data = {
@@ -852,7 +850,7 @@ MODULE_DEVICE_TABLE(of, meson_uart_dt_match);
 
 static  struct platform_driver meson_uart_platform_driver = {
 	.probe		= meson_uart_probe,
-	.remove		= meson_uart_remove,
+	.remove_new	= meson_uart_remove,
 	.driver		= {
 		.name		= "meson_uart",
 		.of_match_table	= meson_uart_dt_match,
diff --git a/drivers/tty/serial/milbeaut_usio.c b/drivers/tty/serial/milbeaut_usio.c
index db3b81f2aa..da4c6f7e2a 100644
--- a/drivers/tty/serial/milbeaut_usio.c
+++ b/drivers/tty/serial/milbeaut_usio.c
@@ -552,15 +552,13 @@ failed:
 	return ret;
 }
 
-static int mlb_usio_remove(struct platform_device *pdev)
+static void mlb_usio_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = &mlb_usio_ports[pdev->id];
 	struct clk *clk = port->private_data;
 
 	uart_remove_one_port(&mlb_usio_uart_driver, port);
 	clk_disable_unprepare(clk);
-
-	return 0;
 }
 
 static const struct of_device_id mlb_usio_dt_ids[] = {
@@ -571,7 +569,7 @@ MODULE_DEVICE_TABLE(of, mlb_usio_dt_ids);
 
 static struct platform_driver mlb_usio_driver = {
 	.probe          = mlb_usio_probe,
-	.remove         = mlb_usio_remove,
+	.remove_new     = mlb_usio_remove,
 	.driver         = {
 		.name   = USIO_NAME,
 		.of_match_table = mlb_usio_dt_ids,
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index a252465e74..95dae5e27b 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -1765,15 +1765,12 @@ static int mpc52xx_uart_of_probe(struct platform_device *op)
 	return 0;
 }
 
-static int
-mpc52xx_uart_of_remove(struct platform_device *op)
+static void mpc52xx_uart_of_remove(struct platform_device *op)
 {
 	struct uart_port *port = platform_get_drvdata(op);
 
 	if (port)
 		uart_remove_one_port(&mpc52xx_uart_driver, port);
-
-	return 0;
 }
 
 #ifdef CONFIG_PM
@@ -1846,7 +1843,7 @@ MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match);
 
 static struct platform_driver mpc52xx_uart_of_driver = {
 	.probe		= mpc52xx_uart_of_probe,
-	.remove		= mpc52xx_uart_of_remove,
+	.remove_new	= mpc52xx_uart_of_remove,
 #ifdef CONFIG_PM
 	.suspend	= mpc52xx_uart_of_suspend,
 	.resume		= mpc52xx_uart_of_resume,
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 597264b546..e24204ad35 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -24,6 +24,7 @@
 #include <linux/slab.h>
 #include <linux/clk.h>
 #include <linux/platform_device.h>
+#include <linux/pm_opp.h>
 #include <linux/delay.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -1131,7 +1132,7 @@ static int msm_set_baud_rate(struct uart_port *port, unsigned int baud,
 	uart_port_unlock_irqrestore(port, flags);
 
 	entry = msm_find_best_baud(port, baud, &rate);
-	clk_set_rate(msm_port->clk, rate);
+	dev_pm_opp_set_rate(port->dev, rate);
 	baud = rate / 16 / entry->divisor;
 
 	uart_port_lock_irqsave(port, &flags);
@@ -1186,6 +1187,7 @@ static void msm_init_clock(struct uart_port *port)
 {
 	struct msm_port *msm_port = to_msm_port(port);
 
+	dev_pm_opp_set_rate(port->dev, port->uartclk);
 	clk_prepare_enable(msm_port->clk);
 	clk_prepare_enable(msm_port->pclk);
 	msm_serial_set_mnd_regs(port);
@@ -1239,6 +1241,7 @@ err_irq:
 
 	clk_disable_unprepare(msm_port->pclk);
 	clk_disable_unprepare(msm_port->clk);
+	dev_pm_opp_set_rate(port->dev, 0);
 
 	return ret;
 }
@@ -1254,6 +1257,7 @@ static void msm_shutdown(struct uart_port *port)
 		msm_release_dma(msm_port);
 
 	clk_disable_unprepare(msm_port->clk);
+	dev_pm_opp_set_rate(port->dev, 0);
 
 	free_irq(port->irq, port);
 }
@@ -1419,11 +1423,13 @@ static void msm_power(struct uart_port *port, unsigned int state,
 
 	switch (state) {
 	case 0:
+		dev_pm_opp_set_rate(port->dev, port->uartclk);
 		clk_prepare_enable(msm_port->clk);
 		clk_prepare_enable(msm_port->pclk);
 		break;
 	case 3:
 		clk_disable_unprepare(msm_port->clk);
+		dev_pm_opp_set_rate(port->dev, 0);
 		clk_disable_unprepare(msm_port->pclk);
 		break;
 	default:
@@ -1789,7 +1795,7 @@ static int msm_serial_probe(struct platform_device *pdev)
 	struct resource *resource;
 	struct uart_port *port;
 	const struct of_device_id *id;
-	int irq, line;
+	int irq, line, ret;
 
 	if (pdev->dev.of_node)
 		line = of_alias_get_id(pdev->dev.of_node, "serial");
@@ -1824,6 +1830,15 @@ static int msm_serial_probe(struct platform_device *pdev)
 			return PTR_ERR(msm_port->pclk);
 	}
 
+	ret = devm_pm_opp_set_clkname(&pdev->dev, "core");
+	if (ret)
+		return ret;
+
+	/* OPP table is optional */
+	ret = devm_pm_opp_of_add_table(&pdev->dev);
+	if (ret && ret != -ENODEV)
+		return dev_err_probe(&pdev->dev, ret, "invalid OPP table\n");
+
 	port->uartclk = clk_get_rate(msm_port->clk);
 	dev_info(&pdev->dev, "uartclk = %d\n", port->uartclk);
 
@@ -1843,13 +1858,11 @@ static int msm_serial_probe(struct platform_device *pdev)
 	return uart_add_one_port(&msm_uart_driver, port);
 }
 
-static int msm_serial_remove(struct platform_device *pdev)
+static void msm_serial_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = platform_get_drvdata(pdev);
 
 	uart_remove_one_port(&msm_uart_driver, port);
-
-	return 0;
 }
 
 static const struct of_device_id msm_match_table[] = {
@@ -1882,7 +1895,7 @@ static const struct dev_pm_ops msm_serial_dev_pm_ops = {
 };
 
 static struct platform_driver msm_platform_driver = {
-	.remove = msm_serial_remove,
+	.remove_new = msm_serial_remove,
 	.probe = msm_serial_probe,
 	.driver = {
 		.name = "msm_serial",
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 380a8b0590..1e8853eae5 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -907,21 +907,27 @@ static void mxs_auart_dma_exit(struct mxs_auart_port *s)
 
 static int mxs_auart_dma_init(struct mxs_auart_port *s)
 {
+	struct dma_chan *chan;
+
 	if (auart_dma_enabled(s))
 		return 0;
 
 	/* init for RX */
-	s->rx_dma_chan = dma_request_slave_channel(s->dev, "rx");
-	if (!s->rx_dma_chan)
+	chan = dma_request_chan(s->dev, "rx");
+	if (IS_ERR(chan))
 		goto err_out;
+	s->rx_dma_chan = chan;
+
 	s->rx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA);
 	if (!s->rx_dma_buf)
 		goto err_out;
 
 	/* init for TX */
-	s->tx_dma_chan = dma_request_slave_channel(s->dev, "tx");
-	if (!s->tx_dma_chan)
+	chan = dma_request_chan(s->dev, "tx");
+	if (IS_ERR(chan))
 		goto err_out;
+	s->tx_dma_chan = chan;
+
 	s->tx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA);
 	if (!s->tx_dma_buf)
 		goto err_out;
@@ -1080,11 +1086,13 @@ static void mxs_auart_set_ldisc(struct uart_port *port,
 
 static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
 {
-	u32 istat;
+	u32 istat, stat;
 	struct mxs_auart_port *s = context;
 	u32 mctrl_temp = s->mctrl_prev;
-	u32 stat = mxs_read(s, REG_STAT);
 
+	uart_port_lock(&s->port);
+
+	stat = mxs_read(s, REG_STAT);
 	istat = mxs_read(s, REG_INTR);
 
 	/* ack irq */
@@ -1120,6 +1128,8 @@ static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
 		istat &= ~AUART_INTR_TXIS;
 	}
 
+	uart_port_unlock(&s->port);
+
 	return IRQ_HANDLED;
 }
 
@@ -1689,7 +1699,7 @@ out_disable_clks:
 	return ret;
 }
 
-static int mxs_auart_remove(struct platform_device *pdev)
+static void mxs_auart_remove(struct platform_device *pdev)
 {
 	struct mxs_auart_port *s = platform_get_drvdata(pdev);
 
@@ -1701,13 +1711,11 @@ static int mxs_auart_remove(struct platform_device *pdev)
 		clk_disable_unprepare(s->clk);
 		clk_disable_unprepare(s->clk_ahb);
 	}
-
-	return 0;
 }
 
 static struct platform_driver mxs_auart_driver = {
 	.probe = mxs_auart_probe,
-	.remove = mxs_auart_remove,
+	.remove_new = mxs_auart_remove,
 	.driver = {
 		.name = "mxs-auart",
 		.of_match_table = mxs_auart_dt_ids,
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index f4c6ff8064..f5a0b401af 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1659,7 +1659,7 @@ err_port_line:
 	return ret;
 }
 
-static int serial_omap_remove(struct platform_device *dev)
+static void serial_omap_remove(struct platform_device *dev)
 {
 	struct uart_omap_port *up = platform_get_drvdata(dev);
 
@@ -1671,8 +1671,6 @@ static int serial_omap_remove(struct platform_device *dev)
 	pm_runtime_disable(up->dev);
 	cpu_latency_qos_remove_request(&up->pm_qos_request);
 	device_init_wakeup(&dev->dev, false);
-
-	return 0;
 }
 
 /*
@@ -1809,7 +1807,7 @@ MODULE_DEVICE_TABLE(of, omap_serial_of_match);
 
 static struct platform_driver serial_omap_driver = {
 	.probe          = serial_omap_probe,
-	.remove         = serial_omap_remove,
+	.remove_new     = serial_omap_remove,
 	.driver		= {
 		.name	= OMAP_SERIAL_DRIVER_NAME,
 		.pm	= &serial_omap_dev_pm_ops,
diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c
index 919f5e5aa0..d9fe853977 100644
--- a/drivers/tty/serial/owl-uart.c
+++ b/drivers/tty/serial/owl-uart.c
@@ -725,20 +725,18 @@ static int owl_uart_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int owl_uart_remove(struct platform_device *pdev)
+static void owl_uart_remove(struct platform_device *pdev)
 {
 	struct owl_uart_port *owl_port = platform_get_drvdata(pdev);
 
 	uart_remove_one_port(&owl_uart_driver, &owl_port->port);
 	owl_uart_ports[pdev->id] = NULL;
 	clk_disable_unprepare(owl_port->clk);
-
-	return 0;
 }
 
 static struct platform_driver owl_uart_platform_driver = {
 	.probe = owl_uart_probe,
-	.remove = owl_uart_remove,
+	.remove_new = owl_uart_remove,
 	.driver = {
 		.name = "owl-uart",
 		.of_match_table = owl_uart_dt_matches,
diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c
index 3a95bf5d55..bbb46e6e98 100644
--- a/drivers/tty/serial/pic32_uart.c
+++ b/drivers/tty/serial/pic32_uart.c
@@ -938,7 +938,7 @@ err:
 	return ret;
 }
 
-static int pic32_uart_remove(struct platform_device *pdev)
+static void pic32_uart_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = platform_get_drvdata(pdev);
 	struct pic32_sport *sport = to_pic32_sport(port);
@@ -947,9 +947,6 @@ static int pic32_uart_remove(struct platform_device *pdev)
 	clk_disable_unprepare(sport->clk);
 	platform_set_drvdata(pdev, NULL);
 	pic32_sports[sport->idx] = NULL;
-
-	/* automatic unroll of sport and gpios */
-	return 0;
 }
 
 static const struct of_device_id pic32_serial_dt_ids[] = {
@@ -960,7 +957,7 @@ MODULE_DEVICE_TABLE(of, pic32_serial_dt_ids);
 
 static struct platform_driver pic32_uart_platform_driver = {
 	.probe		= pic32_uart_probe,
-	.remove		= pic32_uart_remove,
+	.remove_new	= pic32_uart_remove,
 	.driver		= {
 		.name	= PIC32_DEV_NAME,
 		.of_match_table	= of_match_ptr(pic32_serial_dt_ids),
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index c8bf08c19c..77691fbbf7 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -210,7 +210,6 @@ static bool pmz_receive_chars(struct uart_pmac_port *uap)
 {
 	struct tty_port *port;
 	unsigned char ch, r1, drop, flag;
-	int loops = 0;
 
 	/* Sanity check, make sure the old bug is no longer happening */
 	if (uap->port.state == NULL) {
@@ -291,25 +290,12 @@ static bool pmz_receive_chars(struct uart_pmac_port *uap)
 		if (r1 & Rx_OVR)
 			tty_insert_flip_char(port, 0, TTY_OVERRUN);
 	next_char:
-		/* We can get stuck in an infinite loop getting char 0 when the
-		 * line is in a wrong HW state, we break that here.
-		 * When that happens, I disable the receive side of the driver.
-		 * Note that what I've been experiencing is a real irq loop where
-		 * I'm getting flooded regardless of the actual port speed.
-		 * Something strange is going on with the HW
-		 */
-		if ((++loops) > 1000)
-			goto flood;
 		ch = read_zsreg(uap, R0);
 		if (!(ch & Rx_CH_AV))
 			break;
 	}
 
 	return true;
- flood:
-	pmz_interrupt_control(uap, 0);
-	pmz_error("pmz: rx irq flood !\n");
-	return true;
 }
 
 static void pmz_status_handle(struct uart_pmac_port *uap)
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 5499096440..99e08737f2 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1698,7 +1698,7 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int qcom_geni_serial_remove(struct platform_device *pdev)
+static void qcom_geni_serial_remove(struct platform_device *pdev)
 {
 	struct qcom_geni_serial_port *port = platform_get_drvdata(pdev);
 	struct uart_driver *drv = port->private_data.drv;
@@ -1706,8 +1706,6 @@ static int qcom_geni_serial_remove(struct platform_device *pdev)
 	dev_pm_clear_wake_irq(&pdev->dev);
 	device_init_wakeup(&pdev->dev, false);
 	uart_remove_one_port(drv, &port->uport);
-
-	return 0;
 }
 
 static int qcom_geni_serial_sys_suspend(struct device *dev)
@@ -1807,7 +1805,7 @@ static const struct of_device_id qcom_geni_serial_match_table[] = {
 MODULE_DEVICE_TABLE(of, qcom_geni_serial_match_table);
 
 static struct platform_driver qcom_geni_serial_platform_driver = {
-	.remove = qcom_geni_serial_remove,
+	.remove_new = qcom_geni_serial_remove,
 	.probe = qcom_geni_serial_probe,
 	.driver = {
 		.name = "qcom_geni_serial",
diff --git a/drivers/tty/serial/rda-uart.c b/drivers/tty/serial/rda-uart.c
index d824c8318f..13deb355cf 100644
--- a/drivers/tty/serial/rda-uart.c
+++ b/drivers/tty/serial/rda-uart.c
@@ -780,19 +780,17 @@ static int rda_uart_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int rda_uart_remove(struct platform_device *pdev)
+static void rda_uart_remove(struct platform_device *pdev)
 {
 	struct rda_uart_port *rda_port = platform_get_drvdata(pdev);
 
 	uart_remove_one_port(&rda_uart_driver, &rda_port->port);
 	rda_uart_ports[pdev->id] = NULL;
-
-	return 0;
 }
 
 static struct platform_driver rda_uart_platform_driver = {
 	.probe = rda_uart_probe,
-	.remove = rda_uart_remove,
+	.remove_new = rda_uart_remove,
 	.driver = {
 		.name = "rda-uart",
 		.of_match_table = rda_uart_dt_matches,
diff --git a/drivers/tty/serial/rp2.c b/drivers/tty/serial/rp2.c
index d46a81cddf..4132fcff7d 100644
--- a/drivers/tty/serial/rp2.c
+++ b/drivers/tty/serial/rp2.c
@@ -178,7 +178,6 @@ struct rp2_card;
 struct rp2_uart_port {
 	struct uart_port		port;
 	int				idx;
-	int				ignore_rx;
 	struct rp2_card			*card;
 	void __iomem			*asic_base;
 	void __iomem			*base;
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index be7bcd75d9..79c794fa65 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -870,19 +870,17 @@ static int sa1100_serial_probe(struct platform_device *dev)
 	return 0;
 }
 
-static int sa1100_serial_remove(struct platform_device *pdev)
+static void sa1100_serial_remove(struct platform_device *pdev)
 {
 	struct sa1100_port *sport = platform_get_drvdata(pdev);
 
 	if (sport)
 		uart_remove_one_port(&sa1100_reg, &sport->port);
-
-	return 0;
 }
 
 static struct platform_driver sa11x0_serial_driver = {
 	.probe		= sa1100_serial_probe,
-	.remove		= sa1100_serial_remove,
+	.remove_new	= sa1100_serial_remove,
 	.suspend	= sa1100_serial_suspend,
 	.resume		= sa1100_serial_resume,
 	.driver		= {
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 06d140c9f5..6fdb32b833 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -2053,7 +2053,7 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int s3c24xx_serial_remove(struct platform_device *dev)
+static void s3c24xx_serial_remove(struct platform_device *dev)
 {
 	struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
 
@@ -2062,8 +2062,6 @@ static int s3c24xx_serial_remove(struct platform_device *dev)
 	}
 
 	uart_unregister_driver(&s3c24xx_uart_drv);
-
-	return 0;
 }
 
 /* UART power management code */
@@ -2491,14 +2489,25 @@ static const struct s3c24xx_serial_drv_data exynos850_serial_drv_data = {
 	.fifosize = { 256, 64, 64, 64 },
 };
 
+/*
+ * Common drv_data struct for platforms that specify samsung,uart-fifosize in
+ * device tree.
+ */
+static const struct s3c24xx_serial_drv_data exynos_fifoszdt_serial_drv_data = {
+	EXYNOS_COMMON_SERIAL_DRV_DATA(),
+	.fifosize = { 0 },
+};
+
 #define EXYNOS4210_SERIAL_DRV_DATA (&exynos4210_serial_drv_data)
 #define EXYNOS5433_SERIAL_DRV_DATA (&exynos5433_serial_drv_data)
 #define EXYNOS850_SERIAL_DRV_DATA (&exynos850_serial_drv_data)
+#define EXYNOS_FIFOSZDT_DRV_DATA (&exynos_fifoszdt_serial_drv_data)
 
 #else
 #define EXYNOS4210_SERIAL_DRV_DATA NULL
 #define EXYNOS5433_SERIAL_DRV_DATA NULL
 #define EXYNOS850_SERIAL_DRV_DATA NULL
+#define EXYNOS_FIFOSZDT_DRV_DATA NULL
 #endif
 
 #ifdef CONFIG_ARCH_APPLE
@@ -2582,6 +2591,9 @@ static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
 	}, {
 		.name		= "artpec8-uart",
 		.driver_data	= (kernel_ulong_t)ARTPEC8_SERIAL_DRV_DATA,
+	}, {
+		.name		= "gs101-uart",
+		.driver_data	= (kernel_ulong_t)EXYNOS_FIFOSZDT_DRV_DATA,
 	},
 	{ },
 };
@@ -2603,6 +2615,8 @@ static const struct of_device_id s3c24xx_uart_dt_match[] = {
 		.data = EXYNOS850_SERIAL_DRV_DATA },
 	{ .compatible = "axis,artpec8-uart",
 		.data = ARTPEC8_SERIAL_DRV_DATA },
+	{ .compatible = "google,gs101-uart",
+		.data = EXYNOS_FIFOSZDT_DRV_DATA },
 	{},
 };
 MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
@@ -2610,7 +2624,7 @@ MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
 
 static struct platform_driver samsung_serial_driver = {
 	.probe		= s3c24xx_serial_probe,
-	.remove		= s3c24xx_serial_remove,
+	.remove_new	= s3c24xx_serial_remove,
 	.id_table	= s3c24xx_serial_driver_ids,
 	.driver		= {
 		.name	= "samsung-uart",
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index dba25e7090..929206a9a6 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -29,6 +29,7 @@
 
 #define SC16IS7XX_NAME			"sc16is7xx"
 #define SC16IS7XX_MAX_DEVS		8
+#define SC16IS7XX_MAX_PORTS		2 /* Maximum number of UART ports per IC. */
 
 /* SC16IS7XX register definitions */
 #define SC16IS7XX_RHR_REG		(0x00) /* RX FIFO */
@@ -329,8 +330,9 @@ struct sc16is7xx_one {
 	struct kthread_work		reg_work;
 	struct kthread_delayed_work	ms_work;
 	struct sc16is7xx_one_config	config;
-	bool				irda_mode;
 	unsigned int			old_mctrl;
+	u8				old_lcr; /* Value before EFR access. */
+	bool				irda_mode;
 };
 
 struct sc16is7xx_port {
@@ -347,17 +349,15 @@ struct sc16is7xx_port {
 	struct sc16is7xx_one		p[];
 };
 
-static unsigned long sc16is7xx_lines;
+static DECLARE_BITMAP(sc16is7xx_lines, SC16IS7XX_MAX_DEVS);
 
 static struct uart_driver sc16is7xx_uart = {
 	.owner		= THIS_MODULE,
+	.driver_name    = SC16IS7XX_NAME,
 	.dev_name	= "ttySC",
 	.nr		= SC16IS7XX_MAX_DEVS,
 };
 
-static void sc16is7xx_ier_set(struct uart_port *port, u8 bit);
-static void sc16is7xx_stop_tx(struct uart_port *port);
-
 #define to_sc16is7xx_one(p,e)	((container_of((p), struct sc16is7xx_one, e)))
 
 static u8 sc16is7xx_port_read(struct uart_port *port, u8 reg)
@@ -377,17 +377,15 @@ static void sc16is7xx_port_write(struct uart_port *port, u8 reg, u8 val)
 	regmap_write(one->regmap, reg, val);
 }
 
-static void sc16is7xx_fifo_read(struct uart_port *port, unsigned int rxlen)
+static void sc16is7xx_fifo_read(struct uart_port *port, u8 *rxbuf, unsigned int rxlen)
 {
-	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
 	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
 
-	regmap_noinc_read(one->regmap, SC16IS7XX_RHR_REG, s->buf, rxlen);
+	regmap_noinc_read(one->regmap, SC16IS7XX_RHR_REG, rxbuf, rxlen);
 }
 
-static void sc16is7xx_fifo_write(struct uart_port *port, u8 to_send)
+static void sc16is7xx_fifo_write(struct uart_port *port, u8 *txbuf, u8 to_send)
 {
-	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
 	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
 
 	/*
@@ -397,7 +395,7 @@ static void sc16is7xx_fifo_write(struct uart_port *port, u8 to_send)
 	if (unlikely(!to_send))
 		return;
 
-	regmap_noinc_write(one->regmap, SC16IS7XX_THR_REG, s->buf, to_send);
+	regmap_noinc_write(one->regmap, SC16IS7XX_THR_REG, txbuf, to_send);
 }
 
 static void sc16is7xx_port_update(struct uart_port *port, u8 reg,
@@ -415,6 +413,85 @@ static void sc16is7xx_power(struct uart_port *port, int on)
 			      on ? 0 : SC16IS7XX_IER_SLEEP_BIT);
 }
 
+/*
+ * In an amazing feat of design, the Enhanced Features Register (EFR)
+ * shares the address of the Interrupt Identification Register (IIR).
+ * Access to EFR is switched on by writing a magic value (0xbf) to the
+ * Line Control Register (LCR). Any interrupt firing during this time will
+ * see the EFR where it expects the IIR to be, leading to
+ * "Unexpected interrupt" messages.
+ *
+ * Prevent this possibility by claiming a mutex while accessing the EFR,
+ * and claiming the same mutex from within the interrupt handler. This is
+ * similar to disabling the interrupt, but that doesn't work because the
+ * bulk of the interrupt processing is run as a workqueue job in thread
+ * context.
+ */
+static void sc16is7xx_efr_lock(struct uart_port *port)
+{
+	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+
+	mutex_lock(&one->efr_lock);
+
+	/* Backup content of LCR. */
+	one->old_lcr = sc16is7xx_port_read(port, SC16IS7XX_LCR_REG);
+
+	/* Enable access to Enhanced register set */
+	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, SC16IS7XX_LCR_CONF_MODE_B);
+
+	/* Disable cache updates when writing to EFR registers */
+	regcache_cache_bypass(one->regmap, true);
+}
+
+static void sc16is7xx_efr_unlock(struct uart_port *port)
+{
+	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+
+	/* Re-enable cache updates when writing to normal registers */
+	regcache_cache_bypass(one->regmap, false);
+
+	/* Restore original content of LCR */
+	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, one->old_lcr);
+
+	mutex_unlock(&one->efr_lock);
+}
+
+static void sc16is7xx_ier_clear(struct uart_port *port, u8 bit)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+
+	lockdep_assert_held_once(&port->lock);
+
+	one->config.flags |= SC16IS7XX_RECONF_IER;
+	one->config.ier_mask |= bit;
+	one->config.ier_val &= ~bit;
+	kthread_queue_work(&s->kworker, &one->reg_work);
+}
+
+static void sc16is7xx_ier_set(struct uart_port *port, u8 bit)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+
+	lockdep_assert_held_once(&port->lock);
+
+	one->config.flags |= SC16IS7XX_RECONF_IER;
+	one->config.ier_mask |= bit;
+	one->config.ier_val |= bit;
+	kthread_queue_work(&s->kworker, &one->reg_work);
+}
+
+static void sc16is7xx_stop_tx(struct uart_port *port)
+{
+	sc16is7xx_ier_clear(port, SC16IS7XX_IER_THRI_BIT);
+}
+
+static void sc16is7xx_stop_rx(struct uart_port *port)
+{
+	sc16is7xx_ier_clear(port, SC16IS7XX_IER_RDI_BIT);
+}
+
 static const struct sc16is7xx_devtype sc16is74x_devtype = {
 	.name		= "SC16IS74X",
 	.nr_gpio	= 0,
@@ -458,10 +535,8 @@ static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg)
 	case SC16IS7XX_IOCONTROL_REG:
 		return true;
 	default:
-		break;
+		return false;
 	}
-
-	return false;
 }
 
 static bool sc16is7xx_regmap_precious(struct device *dev, unsigned int reg)
@@ -470,10 +545,8 @@ static bool sc16is7xx_regmap_precious(struct device *dev, unsigned int reg)
 	case SC16IS7XX_RHR_REG:
 		return true;
 	default:
-		break;
+		return false;
 	}
-
-	return false;
 }
 
 static bool sc16is7xx_regmap_noinc(struct device *dev, unsigned int reg)
@@ -488,50 +561,24 @@ static int sc16is7xx_set_baud(struct uart_port *port, int baud)
 	u8 prescaler = 0;
 	unsigned long clk = port->uartclk, div = clk / 16 / baud;
 
-	if (div > 0xffff) {
+	if (div >= BIT(16)) {
 		prescaler = SC16IS7XX_MCR_CLKSEL_BIT;
 		div /= 4;
 	}
 
-	/* In an amazing feat of design, the Enhanced Features Register shares
-	 * the address of the Interrupt Identification Register, and is
-	 * switched in by writing a magic value (0xbf) to the Line Control
-	 * Register. Any interrupt firing during this time will see the EFR
-	 * where it expects the IIR to be, leading to "Unexpected interrupt"
-	 * messages.
-	 *
-	 * Prevent this possibility by claiming a mutex while accessing the
-	 * EFR, and claiming the same mutex from within the interrupt handler.
-	 * This is similar to disabling the interrupt, but that doesn't work
-	 * because the bulk of the interrupt processing is run as a workqueue
-	 * job in thread context.
-	 */
-	mutex_lock(&one->efr_lock);
-
-	lcr = sc16is7xx_port_read(port, SC16IS7XX_LCR_REG);
-
-	/* Open the LCR divisors for configuration */
-	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG,
-			     SC16IS7XX_LCR_CONF_MODE_B);
-
 	/* Enable enhanced features */
-	regcache_cache_bypass(one->regmap, true);
+	sc16is7xx_efr_lock(port);
 	sc16is7xx_port_update(port, SC16IS7XX_EFR_REG,
 			      SC16IS7XX_EFR_ENABLE_BIT,
 			      SC16IS7XX_EFR_ENABLE_BIT);
-
-	regcache_cache_bypass(one->regmap, false);
-
-	/* Put LCR back to the normal mode */
-	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);
-
-	mutex_unlock(&one->efr_lock);
+	sc16is7xx_efr_unlock(port);
 
 	sc16is7xx_port_update(port, SC16IS7XX_MCR_REG,
 			      SC16IS7XX_MCR_CLKSEL_BIT,
 			      prescaler);
 
-	/* Open the LCR divisors for configuration */
+	/* Backup LCR and access special register set (DLL/DLH) */
+	lcr = sc16is7xx_port_read(port, SC16IS7XX_LCR_REG);
 	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG,
 			     SC16IS7XX_LCR_CONF_MODE_A);
 
@@ -541,7 +588,7 @@ static int sc16is7xx_set_baud(struct uart_port *port, int baud)
 	sc16is7xx_port_write(port, SC16IS7XX_DLL_REG, div % 256);
 	regcache_cache_bypass(one->regmap, false);
 
-	/* Put LCR back to the normal mode */
+	/* Restore LCR and access to general register set */
 	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);
 
 	return DIV_ROUND_CLOSEST(clk / 16, div);
@@ -577,7 +624,7 @@ static void sc16is7xx_handle_rx(struct uart_port *port, unsigned int rxlen,
 			s->buf[0] = sc16is7xx_port_read(port, SC16IS7XX_RHR_REG);
 			bytes_read = 1;
 		} else {
-			sc16is7xx_fifo_read(port, rxlen);
+			sc16is7xx_fifo_read(port, s->buf, rxlen);
 			bytes_read = rxlen;
 		}
 
@@ -650,7 +697,7 @@ static void sc16is7xx_handle_tx(struct uart_port *port)
 	/* Get length of data pending in circular buffer */
 	to_send = uart_circ_chars_pending(xmit);
 	if (likely(to_send)) {
-		/* Limit to size of TX FIFO */
+		/* Limit to space available in TX FIFO */
 		txlen = sc16is7xx_port_read(port, SC16IS7XX_TXLVL_REG);
 		if (txlen > SC16IS7XX_FIFO_SIZE) {
 			dev_err_ratelimited(port->dev,
@@ -666,7 +713,7 @@ static void sc16is7xx_handle_tx(struct uart_port *port)
 			uart_xmit_advance(port, 1);
 		}
 
-		sc16is7xx_fifo_write(port, to_send);
+		sc16is7xx_fifo_write(port, s->buf, to_send);
 	}
 
 	uart_port_lock_irqsave(port, &flags);
@@ -871,42 +918,6 @@ static void sc16is7xx_reg_proc(struct kthread_work *ws)
 		sc16is7xx_reconf_rs485(&one->port);
 }
 
-static void sc16is7xx_ier_clear(struct uart_port *port, u8 bit)
-{
-	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
-	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
-
-	lockdep_assert_held_once(&port->lock);
-
-	one->config.flags |= SC16IS7XX_RECONF_IER;
-	one->config.ier_mask |= bit;
-	one->config.ier_val &= ~bit;
-	kthread_queue_work(&s->kworker, &one->reg_work);
-}
-
-static void sc16is7xx_ier_set(struct uart_port *port, u8 bit)
-{
-	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
-	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
-
-	lockdep_assert_held_once(&port->lock);
-
-	one->config.flags |= SC16IS7XX_RECONF_IER;
-	one->config.ier_mask |= bit;
-	one->config.ier_val |= bit;
-	kthread_queue_work(&s->kworker, &one->reg_work);
-}
-
-static void sc16is7xx_stop_tx(struct uart_port *port)
-{
-	sc16is7xx_ier_clear(port, SC16IS7XX_IER_THRI_BIT);
-}
-
-static void sc16is7xx_stop_rx(struct uart_port *port)
-{
-	sc16is7xx_ier_clear(port, SC16IS7XX_IER_RDI_BIT);
-}
-
 static void sc16is7xx_ms_proc(struct kthread_work *ws)
 {
 	struct sc16is7xx_one *one = to_sc16is7xx_one(ws, ms_work.work);
@@ -1056,17 +1067,7 @@ static void sc16is7xx_set_termios(struct uart_port *port,
 	if (!(termios->c_cflag & CREAD))
 		port->ignore_status_mask |= SC16IS7XX_LSR_BRK_ERROR_MASK;
 
-	/* As above, claim the mutex while accessing the EFR. */
-	mutex_lock(&one->efr_lock);
-
-	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG,
-			     SC16IS7XX_LCR_CONF_MODE_B);
-
 	/* Configure flow control */
-	regcache_cache_bypass(one->regmap, true);
-	sc16is7xx_port_write(port, SC16IS7XX_XON1_REG, termios->c_cc[VSTART]);
-	sc16is7xx_port_write(port, SC16IS7XX_XOFF1_REG, termios->c_cc[VSTOP]);
-
 	port->status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS);
 	if (termios->c_cflag & CRTSCTS) {
 		flow |= SC16IS7XX_EFR_AUTOCTS_BIT |
@@ -1078,16 +1079,16 @@ static void sc16is7xx_set_termios(struct uart_port *port,
 	if (termios->c_iflag & IXOFF)
 		flow |= SC16IS7XX_EFR_SWFLOW1_BIT;
 
-	sc16is7xx_port_update(port,
-			      SC16IS7XX_EFR_REG,
-			      SC16IS7XX_EFR_FLOWCTRL_BITS,
-			      flow);
-	regcache_cache_bypass(one->regmap, false);
-
 	/* Update LCR register */
 	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);
 
-	mutex_unlock(&one->efr_lock);
+	/* Update EFR registers */
+	sc16is7xx_efr_lock(port);
+	sc16is7xx_port_write(port, SC16IS7XX_XON1_REG, termios->c_cc[VSTART]);
+	sc16is7xx_port_write(port, SC16IS7XX_XOFF1_REG, termios->c_cc[VSTOP]);
+	sc16is7xx_port_update(port, SC16IS7XX_EFR_REG,
+			      SC16IS7XX_EFR_FLOWCTRL_BITS, flow);
+	sc16is7xx_efr_unlock(port);
 
 	/* Get baud rate generator configuration */
 	baud = uart_get_baud_rate(port, termios, old,
@@ -1397,7 +1398,7 @@ static void sc16is7xx_setup_irda_ports(struct sc16is7xx_port *s)
 	int i;
 	int ret;
 	int count;
-	u32 irda_port[2];
+	u32 irda_port[SC16IS7XX_MAX_PORTS];
 	struct device *dev = s->p[0].port.dev;
 
 	count = device_property_count_u32(dev, "irda-mode-ports");
@@ -1424,7 +1425,7 @@ static int sc16is7xx_setup_mctrl_ports(struct sc16is7xx_port *s,
 	int i;
 	int ret;
 	int count;
-	u32 mctrl_port[2];
+	u32 mctrl_port[SC16IS7XX_MAX_PORTS];
 	struct device *dev = s->p[0].port.dev;
 
 	count = device_property_count_u32(dev, "nxp,modem-control-line-ports");
@@ -1536,7 +1537,7 @@ static int sc16is7xx_probe(struct device *dev,
 		     SC16IS7XX_IOCONTROL_SRESET_BIT);
 
 	for (i = 0; i < devtype->nr_uart; ++i) {
-		s->p[i].port.line = find_first_zero_bit(&sc16is7xx_lines,
+		s->p[i].port.line = find_first_zero_bit(sc16is7xx_lines,
 							SC16IS7XX_MAX_DEVS);
 		if (s->p[i].port.line >= SC16IS7XX_MAX_DEVS) {
 			ret = -ERANGE;
@@ -1587,7 +1588,7 @@ static int sc16is7xx_probe(struct device *dev,
 		if (ret)
 			goto out_ports;
 
-		set_bit(s->p[i].port.line, &sc16is7xx_lines);
+		set_bit(s->p[i].port.line, sc16is7xx_lines);
 
 		/* Enable EFR */
 		sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_LCR_REG,
@@ -1646,7 +1647,7 @@ static int sc16is7xx_probe(struct device *dev,
 
 out_ports:
 	for (i = 0; i < devtype->nr_uart; i++)
-		if (test_and_clear_bit(s->p[i].port.line, &sc16is7xx_lines))
+		if (test_and_clear_bit(s->p[i].port.line, sc16is7xx_lines))
 			uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port);
 
 	kthread_stop(s->kworker_task);
@@ -1669,7 +1670,7 @@ static void sc16is7xx_remove(struct device *dev)
 
 	for (i = 0; i < s->devtype->nr_uart; i++) {
 		kthread_cancel_delayed_work_sync(&s->p[i].ms_work);
-		if (test_and_clear_bit(s->p[i].port.line, &sc16is7xx_lines))
+		if (test_and_clear_bit(s->p[i].port.line, sc16is7xx_lines))
 			uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port);
 		sc16is7xx_power(&s->p[i].port, 0);
 	}
@@ -1726,7 +1727,7 @@ static unsigned int sc16is7xx_regmap_port_mask(unsigned int port_id)
 static int sc16is7xx_spi_probe(struct spi_device *spi)
 {
 	const struct sc16is7xx_devtype *devtype;
-	struct regmap *regmaps[2];
+	struct regmap *regmaps[SC16IS7XX_MAX_PORTS];
 	unsigned int i;
 	int ret;
 
@@ -1742,15 +1743,9 @@ static int sc16is7xx_spi_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
-	if (spi->dev.of_node) {
-		devtype = device_get_match_data(&spi->dev);
-		if (!devtype)
-			return -ENODEV;
-	} else {
-		const struct spi_device_id *id_entry = spi_get_device_id(spi);
-
-		devtype = (struct sc16is7xx_devtype *)id_entry->driver_data;
-	}
+	devtype = spi_get_device_match_data(spi);
+	if (!devtype)
+		return dev_err_probe(&spi->dev, -ENODEV, "Failed to match device\n");
 
 	for (i = 0; i < devtype->nr_uart; i++) {
 		regcfg.name = sc16is7xx_regmap_name(i);
@@ -1795,25 +1790,18 @@ static struct spi_driver sc16is7xx_spi_uart_driver = {
 	.remove		= sc16is7xx_spi_remove,
 	.id_table	= sc16is7xx_spi_id_table,
 };
-
-MODULE_ALIAS("spi:sc16is7xx");
 #endif
 
 #ifdef CONFIG_SERIAL_SC16IS7XX_I2C
 static int sc16is7xx_i2c_probe(struct i2c_client *i2c)
 {
-	const struct i2c_device_id *id = i2c_client_get_device_id(i2c);
 	const struct sc16is7xx_devtype *devtype;
-	struct regmap *regmaps[2];
+	struct regmap *regmaps[SC16IS7XX_MAX_PORTS];
 	unsigned int i;
 
-	if (i2c->dev.of_node) {
-		devtype = device_get_match_data(&i2c->dev);
-		if (!devtype)
-			return -ENODEV;
-	} else {
-		devtype = (struct sc16is7xx_devtype *)id->driver_data;
-	}
+	devtype = i2c_get_match_data(i2c);
+	if (!devtype)
+		return dev_err_probe(&i2c->dev, -ENODEV, "Failed to match device\n");
 
 	for (i = 0; i < devtype->nr_uart; i++) {
 		regcfg.name = sc16is7xx_regmap_name(i);
diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c
index 2be2c10980..f24217a560 100644
--- a/drivers/tty/serial/sccnxp.c
+++ b/drivers/tty/serial/sccnxp.c
@@ -1021,7 +1021,7 @@ err_out:
 	return ret;
 }
 
-static int sccnxp_remove(struct platform_device *pdev)
+static void sccnxp_remove(struct platform_device *pdev)
 {
 	int i;
 	struct sccnxp_port *s = platform_get_drvdata(pdev);
@@ -1036,10 +1036,11 @@ static int sccnxp_remove(struct platform_device *pdev)
 
 	uart_unregister_driver(&s->uart);
 
-	if (!IS_ERR(s->regulator))
-		return regulator_disable(s->regulator);
-
-	return 0;
+	if (!IS_ERR(s->regulator)) {
+		int ret = regulator_disable(s->regulator);
+		if (ret)
+			dev_err(&pdev->dev, "Failed to disable regulator\n");
+	}
 }
 
 static struct platform_driver sccnxp_uart_driver = {
@@ -1047,7 +1048,7 @@ static struct platform_driver sccnxp_uart_driver = {
 		.name	= SCCNXP_NAME,
 	},
 	.probe		= sccnxp_probe,
-	.remove		= sccnxp_remove,
+	.remove_new	= sccnxp_remove,
 	.id_table	= sccnxp_id_table,
 };
 module_platform_driver(sccnxp_uart_driver);
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 6d4006b419..525f3a2f7b 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1611,13 +1611,12 @@ static int tegra_uart_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int tegra_uart_remove(struct platform_device *pdev)
+static void tegra_uart_remove(struct platform_device *pdev)
 {
 	struct tegra_uart_port *tup = platform_get_drvdata(pdev);
 	struct uart_port *u = &tup->uport;
 
 	uart_remove_one_port(&tegra_uart_driver, u);
-	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -1644,7 +1643,7 @@ static const struct dev_pm_ops tegra_uart_pm_ops = {
 
 static struct platform_driver tegra_uart_platform_driver = {
 	.probe		= tegra_uart_probe,
-	.remove		= tegra_uart_remove,
+	.remove_new	= tegra_uart_remove,
 	.driver		= {
 		.name	= "serial-tegra",
 		.of_match_table = tegra_uart_of_match,
diff --git a/drivers/tty/serial/serial_base.h b/drivers/tty/serial/serial_base.h
index c74c548f0d..b6c38d2edf 100644
--- a/drivers/tty/serial/serial_base.h
+++ b/drivers/tty/serial/serial_base.h
@@ -22,6 +22,7 @@ struct serial_ctrl_device {
 struct serial_port_device {
 	struct device dev;
 	struct uart_port *port;
+	unsigned int tx_enabled:1;
 };
 
 int serial_base_ctrl_init(void);
@@ -30,6 +31,9 @@ void serial_base_ctrl_exit(void);
 int serial_base_port_init(void);
 void serial_base_port_exit(void);
 
+void serial_base_port_startup(struct uart_port *port);
+void serial_base_port_shutdown(struct uart_port *port);
+
 int serial_base_driver_register(struct device_driver *driver);
 void serial_base_driver_unregister(struct device_driver *driver);
 
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index e383d9a10a..c476d88435 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -156,7 +156,7 @@ static void __uart_start(struct uart_state *state)
 	 * enabled, serial_port_runtime_resume() calls start_tx() again
 	 * after enabling the device.
 	 */
-	if (!pm_runtime_enabled(port->dev) || pm_runtime_active(port->dev))
+	if (!pm_runtime_enabled(port->dev) || pm_runtime_active(&port_dev->dev))
 		port->ops->start_tx(port);
 	pm_runtime_mark_last_busy(&port_dev->dev);
 	pm_runtime_put_autosuspend(&port_dev->dev);
@@ -323,16 +323,26 @@ static int uart_startup(struct tty_struct *tty, struct uart_state *state,
 			bool init_hw)
 {
 	struct tty_port *port = &state->port;
+	struct uart_port *uport;
 	int retval;
 
 	if (tty_port_initialized(port))
-		return 0;
+		goto out_base_port_startup;
 
 	retval = uart_port_startup(tty, state, init_hw);
-	if (retval)
+	if (retval) {
 		set_bit(TTY_IO_ERROR, &tty->flags);
+		return retval;
+	}
 
-	return retval;
+out_base_port_startup:
+	uport = uart_port_check(state);
+	if (!uport)
+		return -EIO;
+
+	serial_base_port_startup(uport);
+
+	return 0;
 }
 
 /*
@@ -355,6 +365,9 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
 	if (tty)
 		set_bit(TTY_IO_ERROR, &tty->flags);
 
+	if (uport)
+		serial_base_port_shutdown(uport);
+
 	if (tty_port_initialized(port)) {
 		tty_port_set_initialized(port, false);
 
@@ -410,11 +423,10 @@ void
 uart_update_timeout(struct uart_port *port, unsigned int cflag,
 		    unsigned int baud)
 {
-	unsigned int size = tty_get_frame_size(cflag);
-	u64 frame_time;
+	u64 temp = tty_get_frame_size(cflag);
 
-	frame_time = (u64)size * NSEC_PER_SEC;
-	port->frame_time = DIV64_U64_ROUND_UP(frame_time, baud);
+	temp *= NSEC_PER_SEC;
+	port->frame_time = (unsigned int)DIV64_U64_ROUND_UP(temp, baud);
 }
 EXPORT_SYMBOL(uart_update_timeout);
 
@@ -687,7 +699,7 @@ EXPORT_SYMBOL_GPL(uart_xchar_out);
  * This function is used to send a high-priority XON/XOFF character to
  * the device
  */
-static void uart_send_xchar(struct tty_struct *tty, char ch)
+static void uart_send_xchar(struct tty_struct *tty, u8 ch)
 {
 	struct uart_state *state = tty->driver_data;
 	struct uart_port *port;
@@ -1371,6 +1383,12 @@ static void uart_sanitize_serial_rs485(struct uart_port *port, struct serial_rs4
 		return;
 	}
 
+	/* Clear other RS485 flags but SER_RS485_TERMINATE_BUS and return if enabling RS422 */
+	if (rs485->flags & SER_RS485_MODE_RS422) {
+		rs485->flags &= (SER_RS485_ENABLED | SER_RS485_MODE_RS422 | SER_RS485_TERMINATE_BUS);
+		return;
+	}
+
 	rs485->flags &= supported_flags;
 
 	/* Pick sane settings if the user hasn't */
@@ -1770,6 +1788,7 @@ static void uart_tty_port_shutdown(struct tty_port *port)
 	uport->ops->stop_rx(uport);
 	uart_port_unlock_irq(uport);
 
+	serial_base_port_shutdown(uport);
 	uart_port_shutdown(port);
 
 	/*
@@ -1783,6 +1802,7 @@ static void uart_tty_port_shutdown(struct tty_port *port)
 	 * Free the transmit buffer.
 	 */
 	uart_port_lock_irq(uport);
+	uart_circ_clear(&state->xmit);
 	buf = state->xmit.buf;
 	state->xmit.buf = NULL;
 	uart_port_unlock_irq(uport);
@@ -2372,7 +2392,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
 
 	mutex_lock(&port->mutex);
 
-	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
+	tty_dev = device_find_child(&uport->port_dev->dev, &match, serial_match_port);
 	if (tty_dev && device_may_wakeup(tty_dev)) {
 		enable_irq_wake(uport->irq);
 		put_device(tty_dev);
@@ -2453,7 +2473,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 
 	mutex_lock(&port->mutex);
 
-	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
+	tty_dev = device_find_child(&uport->port_dev->dev, &match, serial_match_port);
 	if (!uport->suspended && device_may_wakeup(tty_dev)) {
 		if (irqd_is_wakeup_set(irq_get_irq_data((uport->irq))))
 			disable_irq_wake(uport->irq);
@@ -2675,7 +2695,8 @@ static int uart_poll_init(struct tty_driver *driver, int line, char *options)
 	mutex_lock(&tport->mutex);
 
 	port = uart_port_check(state);
-	if (!port || !(port->ops->poll_get_char && port->ops->poll_put_char)) {
+	if (!port || port->type == PORT_UNKNOWN ||
+	    !(port->ops->poll_get_char && port->ops->poll_put_char)) {
 		ret = -1;
 		goto out;
 	}
@@ -3195,7 +3216,8 @@ static int serial_core_add_one_port(struct uart_driver *drv, struct uart_port *u
 	 * setserial to be used to alter this port's parameters.
 	 */
 	tty_dev = tty_port_register_device_attr_serdev(port, drv->tty_driver,
-			uport->line, uport->dev, port, uport->tty_groups);
+			uport->line, uport->dev, &uport->port_dev->dev, port,
+			uport->tty_groups);
 	if (!IS_ERR(tty_dev)) {
 		device_set_wakeup_capable(tty_dev, 1);
 	} else {
diff --git a/drivers/tty/serial/serial_port.c b/drivers/tty/serial/serial_port.c
index 72b6f4f326..7d51e66ec8 100644
--- a/drivers/tty/serial/serial_port.c
+++ b/drivers/tty/serial/serial_port.c
@@ -36,8 +36,12 @@ static int serial_port_runtime_resume(struct device *dev)
 
 	/* Flush any pending TX for the port */
 	uart_port_lock_irqsave(port, &flags);
+	if (!port_dev->tx_enabled)
+		goto unlock;
 	if (__serial_port_busy(port))
 		port->ops->start_tx(port);
+
+unlock:
 	uart_port_unlock_irqrestore(port, flags);
 
 out:
@@ -57,6 +61,11 @@ static int serial_port_runtime_suspend(struct device *dev)
 		return 0;
 
 	uart_port_lock_irqsave(port, &flags);
+	if (!port_dev->tx_enabled) {
+		uart_port_unlock_irqrestore(port, flags);
+		return 0;
+	}
+
 	busy = __serial_port_busy(port);
 	if (busy)
 		port->ops->start_tx(port);
@@ -68,6 +77,31 @@ static int serial_port_runtime_suspend(struct device *dev)
 	return busy ? -EBUSY : 0;
 }
 
+static void serial_base_port_set_tx(struct uart_port *port,
+				    struct serial_port_device *port_dev,
+				    bool enabled)
+{
+	unsigned long flags;
+
+	uart_port_lock_irqsave(port, &flags);
+	port_dev->tx_enabled = enabled;
+	uart_port_unlock_irqrestore(port, flags);
+}
+
+void serial_base_port_startup(struct uart_port *port)
+{
+	struct serial_port_device *port_dev = port->port_dev;
+
+	serial_base_port_set_tx(port, port_dev, true);
+}
+
+void serial_base_port_shutdown(struct uart_port *port)
+{
+	struct serial_port_device *port_dev = port->port_dev;
+
+	serial_base_port_set_tx(port, port_dev, false);
+}
+
 static DEFINE_RUNTIME_DEV_PM_OPS(serial_port_pm,
 				 serial_port_runtime_suspend,
 				 serial_port_runtime_resume, NULL);
diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index eaa9807224..e1897894a4 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -1052,7 +1052,7 @@ static int serial_txx9_probe(struct platform_device *dev)
 /*
  * Remove serial ports registered against a platform device.
  */
-static int serial_txx9_remove(struct platform_device *dev)
+static void serial_txx9_remove(struct platform_device *dev)
 {
 	int i;
 
@@ -1062,7 +1062,6 @@ static int serial_txx9_remove(struct platform_device *dev)
 		if (up->dev == &dev->dev)
 			serial_txx9_unregister_port(i);
 	}
-	return 0;
 }
 
 #ifdef CONFIG_PM
@@ -1097,7 +1096,7 @@ static int serial_txx9_resume(struct platform_device *dev)
 
 static struct platform_driver serial_txx9_plat_driver = {
 	.probe		= serial_txx9_probe,
-	.remove		= serial_txx9_remove,
+	.remove_new	= serial_txx9_remove,
 #ifdef CONFIG_PM
 	.suspend	= serial_txx9_suspend,
 	.resume		= serial_txx9_resume,
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 84ab434c94..a85e7b9a2e 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1558,10 +1558,9 @@ static struct dma_chan *sci_request_dma_chan(struct uart_port *port,
 	struct dma_slave_config cfg;
 	int ret;
 
-	chan = dma_request_slave_channel(port->dev,
-					 dir == DMA_MEM_TO_DEV ? "tx" : "rx");
-	if (!chan) {
-		dev_dbg(port->dev, "dma_request_slave_channel failed\n");
+	chan = dma_request_chan(port->dev, dir == DMA_MEM_TO_DEV ? "tx" : "rx");
+	if (IS_ERR(chan)) {
+		dev_dbg(port->dev, "dma_request_chan failed\n");
 		return NULL;
 	}
 
@@ -3190,7 +3189,7 @@ static struct uart_driver sci_uart_driver = {
 	.cons		= SCI_CONSOLE,
 };
 
-static int sci_remove(struct platform_device *dev)
+static void sci_remove(struct platform_device *dev)
 {
 	struct sci_port *port = platform_get_drvdata(dev);
 	unsigned int type = port->port.type;	/* uart_remove_... clears it */
@@ -3204,8 +3203,6 @@ static int sci_remove(struct platform_device *dev)
 		device_remove_file(&dev->dev, &dev_attr_rx_fifo_trigger);
 	if (type == PORT_SCIFA || type == PORT_SCIFB || type == PORT_HSCIF)
 		device_remove_file(&dev->dev, &dev_attr_rx_fifo_timeout);
-
-	return 0;
 }
 
 
@@ -3470,7 +3467,7 @@ static SIMPLE_DEV_PM_OPS(sci_dev_pm_ops, sci_suspend, sci_resume);
 
 static struct platform_driver sci_driver = {
 	.probe		= sci_probe,
-	.remove		= sci_remove,
+	.remove_new	= sci_remove,
 	.driver		= {
 		.name	= "sh-sci",
 		.pm	= &sci_dev_pm_ops,
diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c
index b296e57a9d..a4cc569a78 100644
--- a/drivers/tty/serial/sifive.c
+++ b/drivers/tty/serial/sifive.c
@@ -1007,7 +1007,7 @@ probe_out1:
 	return r;
 }
 
-static int sifive_serial_remove(struct platform_device *dev)
+static void sifive_serial_remove(struct platform_device *dev)
 {
 	struct sifive_serial_port *ssp = platform_get_drvdata(dev);
 
@@ -1015,8 +1015,6 @@ static int sifive_serial_remove(struct platform_device *dev)
 	uart_remove_one_port(&sifive_serial_uart_driver, &ssp->port);
 	free_irq(ssp->port.irq, ssp);
 	clk_notifier_unregister(ssp->clk, &ssp->clk_notifier);
-
-	return 0;
 }
 
 static int sifive_serial_suspend(struct device *dev)
@@ -1033,8 +1031,8 @@ static int sifive_serial_resume(struct device *dev)
 	return uart_resume_port(&sifive_serial_uart_driver, &ssp->port);
 }
 
-DEFINE_SIMPLE_DEV_PM_OPS(sifive_uart_pm_ops, sifive_serial_suspend,
-			 sifive_serial_resume);
+static DEFINE_SIMPLE_DEV_PM_OPS(sifive_uart_pm_ops, sifive_serial_suspend,
+				sifive_serial_resume);
 
 static const struct of_device_id sifive_serial_of_match[] = {
 	{ .compatible = "sifive,fu540-c000-uart0" },
@@ -1045,7 +1043,7 @@ MODULE_DEVICE_TABLE(of, sifive_serial_of_match);
 
 static struct platform_driver sifive_serial_platform_driver = {
 	.probe		= sifive_serial_probe,
-	.remove		= sifive_serial_remove,
+	.remove_new	= sifive_serial_remove,
 	.driver		= {
 		.name	= SIFIVE_SERIAL_NAME,
 		.pm = pm_sleep_ptr(&sifive_uart_pm_ops),
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index f257525f92..15f14fa593 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -1076,7 +1076,7 @@ static struct uart_driver sprd_uart_driver = {
 	.cons = SPRD_CONSOLE,
 };
 
-static int sprd_remove(struct platform_device *dev)
+static void sprd_remove(struct platform_device *dev)
 {
 	struct sprd_uart_port *sup = platform_get_drvdata(dev);
 
@@ -1089,8 +1089,6 @@ static int sprd_remove(struct platform_device *dev)
 
 	if (!sprd_ports_num)
 		uart_unregister_driver(&sprd_uart_driver);
-
-	return 0;
 }
 
 static bool sprd_uart_is_console(struct uart_port *uport)
@@ -1257,7 +1255,7 @@ MODULE_DEVICE_TABLE(of, serial_ids);
 
 static struct platform_driver sprd_platform_driver = {
 	.probe		= sprd_probe,
-	.remove		= sprd_remove,
+	.remove_new	= sprd_remove,
 	.driver		= {
 		.name	= "sprd_serial",
 		.of_match_table = serial_ids,
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index a821f5d76a..bbb5595d7e 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -793,13 +793,11 @@ static int asc_serial_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int asc_serial_remove(struct platform_device *pdev)
+static void asc_serial_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = platform_get_drvdata(pdev);
 
 	uart_remove_one_port(&asc_uart_driver, port);
-
-	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -932,7 +930,7 @@ static const struct dev_pm_ops asc_serial_pm_ops = {
 
 static struct platform_driver asc_serial_driver = {
 	.probe		= asc_serial_probe,
-	.remove		= asc_serial_remove,
+	.remove_new	= asc_serial_remove,
 	.driver	= {
 		.name	= DRIVER_NAME,
 		.pm	= &asc_serial_pm_ops,
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index e93e3a9b48..d103b07d10 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -857,6 +857,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
 	const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
 	u32 sr;
 	unsigned int size;
+	irqreturn_t ret = IRQ_NONE;
 
 	sr = readl_relaxed(port->membase + ofs->isr);
 
@@ -865,11 +866,14 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
 	    (sr & USART_SR_TC)) {
 		stm32_usart_tc_interrupt_disable(port);
 		stm32_usart_rs485_rts_disable(port);
+		ret = IRQ_HANDLED;
 	}
 
-	if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG)
+	if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG) {
 		writel_relaxed(USART_ICR_RTOCF,
 			       port->membase + ofs->icr);
+		ret = IRQ_HANDLED;
+	}
 
 	if ((sr & USART_SR_WUF) && ofs->icr != UNDEF_REG) {
 		/* Clear wake up flag and disable wake up interrupt */
@@ -878,6 +882,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
 		stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_WUFIE);
 		if (irqd_is_wakeup_set(irq_get_irq_data(port->irq)))
 			pm_wakeup_event(tport->tty->dev, 0);
+		ret = IRQ_HANDLED;
 	}
 
 	/*
@@ -892,6 +897,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
 			uart_unlock_and_check_sysrq(port);
 			if (size)
 				tty_flip_buffer_push(tport);
+			ret = IRQ_HANDLED;
 		}
 	}
 
@@ -899,6 +905,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
 		uart_port_lock(port);
 		stm32_usart_transmit_chars(port);
 		uart_port_unlock(port);
+		ret = IRQ_HANDLED;
 	}
 
 	/* Receiver timeout irq for DMA RX */
@@ -908,9 +915,10 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
 		uart_unlock_and_check_sysrq(port);
 		if (size)
 			tty_flip_buffer_push(tport);
+		ret = IRQ_HANDLED;
 	}
 
-	return IRQ_HANDLED;
+	return ret;
 }
 
 static void stm32_usart_set_mctrl(struct uart_port *port, unsigned int mctrl)
@@ -1080,6 +1088,7 @@ static int stm32_usart_startup(struct uart_port *port)
 		val |= USART_CR2_SWAP;
 		writel_relaxed(val, port->membase + ofs->cr2);
 	}
+	stm32_port->throttled = false;
 
 	/* RX FIFO Flush */
 	if (ofs->rqr != UNDEF_REG)
@@ -1820,7 +1829,7 @@ err_dma_rx:
 	return ret;
 }
 
-static int stm32_usart_serial_remove(struct platform_device *pdev)
+static void stm32_usart_serial_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = platform_get_drvdata(pdev);
 	struct stm32_port *stm32_port = to_stm32_port(port);
@@ -1859,8 +1868,6 @@ static int stm32_usart_serial_remove(struct platform_device *pdev)
 	}
 
 	stm32_usart_deinit_port(stm32_port);
-
-	return 0;
 }
 
 static void __maybe_unused stm32_usart_console_putchar(struct uart_port *port, unsigned char ch)
@@ -2144,7 +2151,7 @@ static const struct dev_pm_ops stm32_serial_pm_ops = {
 
 static struct platform_driver stm32_serial_driver = {
 	.probe		= stm32_usart_serial_probe,
-	.remove		= stm32_usart_serial_remove,
+	.remove_new	= stm32_usart_serial_remove,
 	.driver	= {
 		.name	= DRIVER_NAME,
 		.pm	= &stm32_serial_pm_ops,
diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c
index 5bfc0040f1..8d612ab806 100644
--- a/drivers/tty/serial/sunhv.c
+++ b/drivers/tty/serial/sunhv.c
@@ -595,7 +595,7 @@ out_free_port:
 	return err;
 }
 
-static int hv_remove(struct platform_device *dev)
+static void hv_remove(struct platform_device *dev)
 {
 	struct uart_port *port = platform_get_drvdata(dev);
 
@@ -608,8 +608,6 @@ static int hv_remove(struct platform_device *dev)
 	kfree(con_write_page);
 	kfree(port);
 	sunhv_port = NULL;
-
-	return 0;
 }
 
 static const struct of_device_id hv_match[] = {
@@ -630,7 +628,7 @@ static struct platform_driver hv_driver = {
 		.of_match_table = hv_match,
 	},
 	.probe		= hv_probe,
-	.remove		= hv_remove,
+	.remove_new	= hv_remove,
 };
 
 static int __init sunhv_init(void)
diff --git a/drivers/tty/serial/sunplus-uart.c b/drivers/tty/serial/sunplus-uart.c
index 4251f4e1ba..99f5285819 100644
--- a/drivers/tty/serial/sunplus-uart.c
+++ b/drivers/tty/serial/sunplus-uart.c
@@ -662,13 +662,11 @@ static int sunplus_uart_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int sunplus_uart_remove(struct platform_device *pdev)
+static void sunplus_uart_remove(struct platform_device *pdev)
 {
 	struct sunplus_uart_port *sup = platform_get_drvdata(pdev);
 
 	uart_remove_one_port(&sunplus_uart_driver, &sup->port);
-
-	return 0;
 }
 
 static int __maybe_unused sunplus_uart_suspend(struct device *dev)
@@ -703,7 +701,7 @@ MODULE_DEVICE_TABLE(of, sp_uart_of_match);
 
 static struct platform_driver sunplus_uart_platform_driver = {
 	.probe		= sunplus_uart_probe,
-	.remove		= sunplus_uart_remove,
+	.remove_new	= sunplus_uart_remove,
 	.driver = {
 		.name	= "sunplus_uart",
 		.of_match_table = sp_uart_of_match,
diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
index 6aa51a6f80..1ea2f33a07 100644
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -443,7 +443,7 @@ static void sunsab_start_tx(struct uart_port *port)
 
 	up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
 	writeb(up->interrupt_mask1, &up->regs->w.imr1);
-	
+
 	if (!test_bit(SAB82532_XPR, &up->irqflags))
 		return;
 
@@ -549,7 +549,7 @@ static int sunsab_startup(struct uart_port *port)
 	(void) readb(&up->regs->r.isr1);
 
 	/*
-	 * Now, initialize the UART 
+	 * Now, initialize the UART
 	 */
 	writeb(0, &up->regs->w.ccr0);				/* power-down */
 	writeb(SAB82532_CCR0_MCE | SAB82532_CCR0_SC_NRZ |
@@ -563,7 +563,7 @@ static int sunsab_startup(struct uart_port *port)
 			   SAB82532_MODE_RAC);
 	writeb(up->cached_mode, &up->regs->w.mode);
 	writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc);
-	
+
 	tmp = readb(&up->regs->rw.ccr0);
 	tmp |= SAB82532_CCR0_PU;	/* power-up */
 	writeb(tmp, &up->regs->rw.ccr0);
@@ -607,7 +607,7 @@ static void sunsab_shutdown(struct uart_port *port)
 	up->cached_dafo &= ~SAB82532_DAFO_XBRK;
 	writeb(up->cached_dafo, &up->regs->rw.dafo);
 
-	/* Disable Receiver */	
+	/* Disable Receiver */
 	up->cached_mode &= ~SAB82532_MODE_RAC;
 	writeb(up->cached_mode, &up->regs->rw.mode);
 
@@ -622,7 +622,7 @@ static void sunsab_shutdown(struct uart_port *port)
 	 * speed the chip was configured for when the port was open).
 	 */
 #if 0
-	/* Power Down */	
+	/* Power Down */
 	tmp = readb(&up->regs->rw.ccr0);
 	tmp &= ~SAB82532_CCR0_PU;
 	writeb(tmp, &up->regs->rw.ccr0);
@@ -649,7 +649,7 @@ static void calc_ebrg(int baud, int *n_ret, int *m_ret)
 		*m_ret = 0;
 		return;
 	}
-     
+
 	/*
 	 * We scale numbers by 10 so that we get better accuracy
 	 * without having to use floating point.  Here we increment m
@@ -788,7 +788,7 @@ static const char *sunsab_type(struct uart_port *port)
 {
 	struct uart_sunsab_port *up = (void *)port;
 	static char buf[36];
-	
+
 	sprintf(buf, "SAB82532 %s", sab82532_version[up->type]);
 	return buf;
 }
@@ -933,7 +933,7 @@ static int sunsab_console_setup(struct console *con, char *options)
 	sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
 
 	uart_port_unlock_irqrestore(&up->port, flags);
-	
+
 	return 0;
 }
 
@@ -1066,7 +1066,7 @@ out:
 	return err;
 }
 
-static int sab_remove(struct platform_device *op)
+static void sab_remove(struct platform_device *op)
 {
 	struct uart_sunsab_port *up = platform_get_drvdata(op);
 
@@ -1078,8 +1078,6 @@ static int sab_remove(struct platform_device *op)
 	of_iounmap(&op->resource[0],
 		   up[0].port.membase,
 		   sizeof(union sab82532_async_regs));
-
-	return 0;
 }
 
 static const struct of_device_id sab_match[] = {
@@ -1100,7 +1098,7 @@ static struct platform_driver sab_driver = {
 		.of_match_table = sab_match,
 	},
 	.probe		= sab_probe,
-	.remove		= sab_remove,
+	.remove_new	= sab_remove,
 };
 
 static int __init sunsab_init(void)
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 1e051cc259..c8b65f4b27 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -1515,7 +1515,7 @@ out_unmap:
 	return err;
 }
 
-static int su_remove(struct platform_device *op)
+static void su_remove(struct platform_device *op)
 {
 	struct uart_sunsu_port *up = platform_get_drvdata(op);
 	bool kbdms = false;
@@ -1536,8 +1536,6 @@ static int su_remove(struct platform_device *op)
 
 	if (kbdms)
 		kfree(up);
-
-	return 0;
 }
 
 static const struct of_device_id su_match[] = {
@@ -1565,7 +1563,7 @@ static struct platform_driver su_driver = {
 		.of_match_table = su_match,
 	},
 	.probe		= su_probe,
-	.remove		= su_remove,
+	.remove_new	= su_remove,
 };
 
 static int __init sunsu_init(void)
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index d3b5e864b7..c99289c6c8 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -1513,7 +1513,7 @@ static void zs_remove_one(struct uart_sunzilog_port *up)
 		uart_remove_one_port(&sunzilog_reg, &up->port);
 }
 
-static int zs_remove(struct platform_device *op)
+static void zs_remove(struct platform_device *op)
 {
 	struct uart_sunzilog_port *up = platform_get_drvdata(op);
 	struct zilog_layout __iomem *regs;
@@ -1523,8 +1523,6 @@ static int zs_remove(struct platform_device *op)
 
 	regs = sunzilog_chip_regs[up[0].port.line / 2];
 	of_iounmap(&op->resource[0], regs, sizeof(struct zilog_layout));
-
-	return 0;
 }
 
 static const struct of_device_id zs_match[] = {
@@ -1541,7 +1539,7 @@ static struct platform_driver zs_driver = {
 		.of_match_table = zs_match,
 	},
 	.probe		= zs_probe,
-	.remove		= zs_remove,
+	.remove_new	= zs_remove,
 };
 
 static int __init sunzilog_init(void)
diff --git a/drivers/tty/serial/tegra-tcu.c b/drivers/tty/serial/tegra-tcu.c
index 65069daf36..d9c78320eb 100644
--- a/drivers/tty/serial/tegra-tcu.c
+++ b/drivers/tty/serial/tegra-tcu.c
@@ -266,7 +266,7 @@ free_tx:
 	return err;
 }
 
-static int tegra_tcu_remove(struct platform_device *pdev)
+static void tegra_tcu_remove(struct platform_device *pdev)
 {
 	struct tegra_tcu *tcu = platform_get_drvdata(pdev);
 
@@ -277,8 +277,6 @@ static int tegra_tcu_remove(struct platform_device *pdev)
 	uart_remove_one_port(&tcu->driver, &tcu->port);
 	uart_unregister_driver(&tcu->driver);
 	mbox_free_channel(tcu->tx);
-
-	return 0;
 }
 
 static const struct of_device_id tegra_tcu_match[] = {
@@ -293,7 +291,7 @@ static struct platform_driver tegra_tcu_driver = {
 		.of_match_table = tegra_tcu_match,
 	},
 	.probe = tegra_tcu_probe,
-	.remove = tegra_tcu_remove,
+	.remove_new = tegra_tcu_remove,
 };
 module_platform_driver(tegra_tcu_driver);
 
diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c
index 0cc6524f5e..4bc89a9b38 100644
--- a/drivers/tty/serial/timbuart.c
+++ b/drivers/tty/serial/timbuart.c
@@ -473,7 +473,7 @@ err_mem:
 	return err;
 }
 
-static int timbuart_remove(struct platform_device *dev)
+static void timbuart_remove(struct platform_device *dev)
 {
 	struct timbuart_port *uart = platform_get_drvdata(dev);
 
@@ -481,8 +481,6 @@ static int timbuart_remove(struct platform_device *dev)
 	uart_remove_one_port(&timbuart_driver, &uart->port);
 	uart_unregister_driver(&timbuart_driver);
 	kfree(uart);
-
-	return 0;
 }
 
 static struct platform_driver timbuart_platform_driver = {
@@ -490,7 +488,7 @@ static struct platform_driver timbuart_platform_driver = {
 		.name	= "timb-uart",
 	},
 	.probe		= timbuart_probe,
-	.remove		= timbuart_remove,
+	.remove_new	= timbuart_remove,
 };
 
 module_platform_driver(timbuart_platform_driver);
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 404c14acaf..10ba41b7be 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -24,8 +24,13 @@
 #include <linux/pm_runtime.h>
 
 #define ULITE_NAME		"ttyUL"
+#if CONFIG_SERIAL_UARTLITE_NR_UARTS > 4
+#define ULITE_MAJOR             0       /* use dynamic node allocation */
+#define ULITE_MINOR             0
+#else
 #define ULITE_MAJOR		204
 #define ULITE_MINOR		187
+#endif
 #define ULITE_NR_UARTS		CONFIG_SERIAL_UARTLITE_NR_UARTS
 
 /* ---------------------------------------------------------------------
@@ -62,11 +67,11 @@ static struct uart_port *console_port;
 #endif
 
 /**
- * struct uartlite_data: Driver private data
- * reg_ops: Functions to read/write registers
- * clk: Our parent clock, if present
- * baud: The baud rate configured when this device was synthesized
- * cflags: The cflags for parity and data bits
+ * struct uartlite_data - Driver private data
+ * @reg_ops: Functions to read/write registers
+ * @clk: Our parent clock, if present
+ * @baud: The baud rate configured when this device was synthesized
+ * @cflags: The cflags for parity and data bits
  */
 struct uartlite_data {
 	const struct uartlite_reg_ops *reg_ops;
@@ -890,7 +895,7 @@ of_err:
 	return ret;
 }
 
-static int ulite_remove(struct platform_device *pdev)
+static void ulite_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = dev_get_drvdata(&pdev->dev);
 	struct uartlite_data *pdata = port->private_data;
@@ -900,7 +905,6 @@ static int ulite_remove(struct platform_device *pdev)
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_set_suspended(&pdev->dev);
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
-	return 0;
 }
 
 /* work with hotplug and coldplug */
@@ -908,7 +912,7 @@ MODULE_ALIAS("platform:uartlite");
 
 static struct platform_driver ulite_platform_driver = {
 	.probe = ulite_probe,
-	.remove = ulite_remove,
+	.remove_new = ulite_remove,
 	.driver = {
 		.name  = "uartlite",
 		.of_match_table = of_match_ptr(ulite_of_match),
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index ed7a6bb559..397b95dff7 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -189,10 +189,10 @@ struct uart_qe_port {
 	u16 tx_fifosize;
 	int wait_closing;
 	u32 flags;
-	struct qe_bd *rx_bd_base;
-	struct qe_bd *rx_cur;
-	struct qe_bd *tx_bd_base;
-	struct qe_bd *tx_cur;
+	struct qe_bd __iomem *rx_bd_base;
+	struct qe_bd __iomem *rx_cur;
+	struct qe_bd __iomem *tx_bd_base;
+	struct qe_bd __iomem *tx_cur;
 	unsigned char *tx_buf;
 	unsigned char *rx_buf;
 	void *bd_virt;  	/* virtual address of the BD buffers */
@@ -258,7 +258,7 @@ static unsigned int qe_uart_tx_empty(struct uart_port *port)
 {
 	struct uart_qe_port *qe_port =
 		container_of(port, struct uart_qe_port, port);
-	struct qe_bd *bdp = qe_port->tx_bd_base;
+	struct qe_bd __iomem *bdp = qe_port->tx_bd_base;
 
 	while (1) {
 		if (ioread16be(&bdp->status) & BD_SC_READY)
@@ -330,7 +330,7 @@ static void qe_uart_stop_tx(struct uart_port *port)
  */
 static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
 {
-	struct qe_bd *bdp;
+	struct qe_bd __iomem *bdp;
 	unsigned char *p;
 	unsigned int count;
 	struct uart_port *port = &qe_port->port;
@@ -341,7 +341,7 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
 		/* Pick next descriptor and fill from buffer */
 		bdp = qe_port->tx_cur;
 
-		p = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port);
+		p = qe2cpu_addr(ioread32be(&bdp->buf), qe_port);
 
 		*p++ = port->x_char;
 		iowrite16be(1, &bdp->length);
@@ -368,7 +368,7 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
 
 	while (!(ioread16be(&bdp->status) & BD_SC_READY) && !uart_circ_empty(xmit)) {
 		count = 0;
-		p = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port);
+		p = qe2cpu_addr(ioread32be(&bdp->buf), qe_port);
 		while (count < qe_port->tx_fifosize) {
 			*p++ = xmit->buf[xmit->tail];
 			uart_xmit_advance(port, 1);
@@ -460,7 +460,7 @@ static void qe_uart_int_rx(struct uart_qe_port *qe_port)
 	unsigned char ch, *cp;
 	struct uart_port *port = &qe_port->port;
 	struct tty_port *tport = &port->state->port;
-	struct qe_bd *bdp;
+	struct qe_bd __iomem *bdp;
 	u16 status;
 	unsigned int flg;
 
@@ -487,7 +487,7 @@ static void qe_uart_int_rx(struct uart_qe_port *qe_port)
 		}
 
 		/* get pointer */
-		cp = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port);
+		cp = qe2cpu_addr(ioread32be(&bdp->buf), qe_port);
 
 		/* loop through the buffer */
 		while (i-- > 0) {
@@ -590,7 +590,7 @@ static void qe_uart_initbd(struct uart_qe_port *qe_port)
 {
 	int i;
 	void *bd_virt;
-	struct qe_bd *bdp;
+	struct qe_bd __iomem *bdp;
 
 	/* Set the physical address of the host memory buffers in the buffer
 	 * descriptors, and the virtual address for us to work with.
@@ -648,7 +648,7 @@ static void qe_uart_init_ucc(struct uart_qe_port *qe_port)
 {
 	u32 cecr_subblock;
 	struct ucc_slow __iomem *uccp = qe_port->uccp;
-	struct ucc_uart_pram *uccup = qe_port->uccup;
+	struct ucc_uart_pram __iomem *uccup = qe_port->uccup;
 
 	unsigned int i;
 
@@ -983,7 +983,7 @@ static int qe_uart_request_port(struct uart_port *port)
 
 	qe_port->us_private = uccs;
 	qe_port->uccp = uccs->us_regs;
-	qe_port->uccup = (struct ucc_uart_pram *) uccs->us_pram;
+	qe_port->uccup = (struct ucc_uart_pram __iomem *)uccs->us_pram;
 	qe_port->rx_bd_base = uccs->rx_bd;
 	qe_port->tx_bd_base = uccs->tx_bd;
 
@@ -1156,7 +1156,7 @@ static void uart_firmware_cont(const struct firmware *fw, void *context)
 
 	firmware = (struct qe_firmware *) fw->data;
 
-	if (firmware->header.length != fw->size) {
+	if (be32_to_cpu(firmware->header.length) != fw->size) {
 		dev_err(dev, "invalid firmware\n");
 		goto out;
 	}
@@ -1459,7 +1459,7 @@ out_free:
 	return ret;
 }
 
-static int ucc_uart_remove(struct platform_device *ofdev)
+static void ucc_uart_remove(struct platform_device *ofdev)
 {
 	struct uart_qe_port *qe_port = platform_get_drvdata(ofdev);
 
@@ -1470,8 +1470,6 @@ static int ucc_uart_remove(struct platform_device *ofdev)
 	of_node_put(qe_port->np);
 
 	kfree(qe_port);
-
-	return 0;
 }
 
 static const struct of_device_id ucc_uart_match[] = {
@@ -1492,7 +1490,7 @@ static struct platform_driver ucc_uart_of_driver = {
 		.of_match_table    = ucc_uart_match,
 	},
 	.probe  	= ucc_uart_probe,
-	.remove 	= ucc_uart_remove,
+	.remove_new 	= ucc_uart_remove,
 };
 
 static int __init ucc_uart_init(void)
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 66a45a6341..920762d7b4 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1663,10 +1663,8 @@ err_out_unregister_driver:
 /**
  * cdns_uart_remove - called when the platform driver is unregistered
  * @pdev: Pointer to the platform device structure
- *
- * Return: 0 on success, negative errno otherwise
  */
-static int cdns_uart_remove(struct platform_device *pdev)
+static void cdns_uart_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = platform_get_drvdata(pdev);
 	struct cdns_uart *cdns_uart_data = port->private_data;
@@ -1692,12 +1690,11 @@ static int cdns_uart_remove(struct platform_device *pdev)
 
 	if (!--instances)
 		uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
-	return 0;
 }
 
 static struct platform_driver cdns_uart_platform_driver = {
 	.probe   = cdns_uart_probe,
-	.remove  = cdns_uart_remove,
+	.remove_new = cdns_uart_remove,
 	.driver  = {
 		.name = CDNS_UART_NAME,
 		.of_match_table = cdns_uart_of_match,