Adding upstream version 6.7.12.upstream/6.7.12

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

10 files changed, 76 insertions, 29 deletions

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 23366f868a..dab94835b6 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -753,6 +753,7 @@ static void exar_pci_remove(struct pci_dev *pcidev)
 	for (i = 0; i < priv->nr; i++)
 		serial8250_unregister_port(priv->line[i]);
 
+	/* Ensure that every init quirk is properly torn down */
 	if (priv->board->exit)
 		priv->board->exit(pcidev);
 }
@@ -767,10 +768,6 @@ static int __maybe_unused exar_suspend(struct device *dev)
 		if (priv->line[i] >= 0)
 			serial8250_suspend_port(priv->line[i]);
 
-	/* Ensure that every init quirk is properly torn down */
-	if (priv->board->exit)
-		priv->board->exit(pcidev);
-
 	return 0;
 }
 
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 8ca061d3bb..1d65055dde 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1329,9 +1329,6 @@ static void autoconfig_irq(struct uart_8250_port *up)
 		inb_p(ICP);
 	}
 
-	if (uart_console(port))
-		console_lock();
-
 	/* forget possible initially masked and pending IRQ */
 	probe_irq_off(probe_irq_on());
 	save_mcr = serial8250_in_MCR(up);
@@ -1371,9 +1368,6 @@ static void autoconfig_irq(struct uart_8250_port *up)
 	if (port->flags & UPF_FOURPORT)
 		outb_p(save_ICP, ICP);
 
-	if (uart_console(port))
-		console_unlock();
-
 	port->irq = (irq > 0) ? irq : 0;
 }
 
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 6d0cfb2e86..71d0cbd748 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -2345,9 +2345,12 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	lpuart32_write(&sport->port, bd, UARTBAUD);
 	lpuart32_serial_setbrg(sport, baud);
-	lpuart32_write(&sport->port, modem, UARTMODIR);
-	lpuart32_write(&sport->port, ctrl, UARTCTRL);
+	/* disable CTS before enabling UARTCTRL_TE to avoid pending idle preamble */
+	lpuart32_write(&sport->port, modem & ~UARTMODIR_TXCTSE, UARTMODIR);
 	/* restore control register */
+	lpuart32_write(&sport->port, ctrl, UARTCTRL);
+	/* re-enable the CTS if needed */
+	lpuart32_write(&sport->port, modem, UARTMODIR);
 
 	if ((ctrl & (UARTCTRL_PE | UARTCTRL_M)) == UARTCTRL_PE)
 		sport->is_cs7 = true;
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 81557a58f8..5545bf4a79 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -462,8 +462,7 @@ static void imx_uart_stop_tx(struct uart_port *port)
 	}
 }
 
-/* called with port.lock taken and irqs off */
-static void imx_uart_stop_rx(struct uart_port *port)
+static void imx_uart_stop_rx_with_loopback_ctrl(struct uart_port *port, bool loopback)
 {
 	struct imx_port *sport = (struct imx_port *)port;
 	u32 ucr1, ucr2, ucr4, uts;
@@ -485,7 +484,7 @@ static void imx_uart_stop_rx(struct uart_port *port)
 	/* See SER_RS485_ENABLED/UTS_LOOP comment in imx_uart_probe() */
 	if (port->rs485.flags & SER_RS485_ENABLED &&
 	    port->rs485.flags & SER_RS485_RTS_ON_SEND &&
-	    sport->have_rtscts && !sport->have_rtsgpio) {
+	    sport->have_rtscts && !sport->have_rtsgpio && loopback) {
 		uts = imx_uart_readl(sport, imx_uart_uts_reg(sport));
 		uts |= UTS_LOOP;
 		imx_uart_writel(sport, uts, imx_uart_uts_reg(sport));
@@ -498,6 +497,16 @@ static void imx_uart_stop_rx(struct uart_port *port)
 }
 
 /* called with port.lock taken and irqs off */
+static void imx_uart_stop_rx(struct uart_port *port)
+{
+	/*
+	 * Stop RX and enable loopback in order to make sure RS485 bus
+	 * is not blocked. Se comment in imx_uart_probe().
+	 */
+	imx_uart_stop_rx_with_loopback_ctrl(port, true);
+}
+
+/* called with port.lock taken and irqs off */
 static void imx_uart_enable_ms(struct uart_port *port)
 {
 	struct imx_port *sport = (struct imx_port *)port;
@@ -682,9 +691,14 @@ static void imx_uart_start_tx(struct uart_port *port)
 				imx_uart_rts_inactive(sport, &ucr2);
 			imx_uart_writel(sport, ucr2, UCR2);
 
+			/*
+			 * Since we are about to transmit we can not stop RX
+			 * with loopback enabled because that will make our
+			 * transmitted data being just looped to RX.
+			 */
 			if (!(port->rs485.flags & SER_RS485_RX_DURING_TX) &&
 			    !port->rs485_rx_during_tx_gpio)
-				imx_uart_stop_rx(port);
+				imx_uart_stop_rx_with_loopback_ctrl(port, false);
 
 			sport->tx_state = WAIT_AFTER_RTS;
 
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 07f7b48bad..1a4bb55652 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1461,7 +1461,7 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
 	if (!ret)
 		return 0;
 
-	dev_err(dev, "Unable to reguest IRQ %i\n", irq);
+	dev_err(dev, "Unable to request IRQ %i\n", irq);
 
 out_uart:
 	for (i = 0; i < devtype->nr; i++) {
@@ -1635,13 +1635,16 @@ static unsigned short max310x_i2c_slave_addr(unsigned short addr,
 
 static int max310x_i2c_probe(struct i2c_client *client)
 {
-	const struct max310x_devtype *devtype =
-			device_get_match_data(&client->dev);
+	const struct max310x_devtype *devtype;
 	struct i2c_client *port_client;
 	struct regmap *regmaps[4];
 	unsigned int i;
 	u8 port_addr;
 
+	devtype = device_get_match_data(&client->dev);
+	if (!devtype)
+		return dev_err_probe(&client->dev, -ENODEV, "Failed to match device\n");
+
 	if (client->addr < devtype->slave_addr.min ||
 		client->addr > devtype->slave_addr.max)
 		return dev_err_probe(&client->dev, -EINVAL,
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 7e78f97e8f..5499096440 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -851,19 +851,21 @@ static void qcom_geni_serial_stop_tx(struct uart_port *uport)
 }
 
 static void qcom_geni_serial_send_chunk_fifo(struct uart_port *uport,
-					     unsigned int remaining)
+					     unsigned int chunk)
 {
 	struct qcom_geni_serial_port *port = to_dev_port(uport);
 	struct circ_buf *xmit = &uport->state->xmit;
-	unsigned int tx_bytes;
+	unsigned int tx_bytes, c, remaining = chunk;
 	u8 buf[BYTES_PER_FIFO_WORD];
 
 	while (remaining) {
 		memset(buf, 0, sizeof(buf));
 		tx_bytes = min(remaining, BYTES_PER_FIFO_WORD);
 
-		memcpy(buf, &xmit->buf[xmit->tail], tx_bytes);
-		uart_xmit_advance(uport, tx_bytes);
+		for (c = 0; c < tx_bytes ; c++) {
+			buf[c] = xmit->buf[xmit->tail];
+			uart_xmit_advance(uport, 1);
+		}
 
 		iowrite32_rep(uport->membase + SE_GENI_TX_FIFOn, buf, 1);
 
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 3bd552841c..06d140c9f5 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -987,11 +987,10 @@ static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
 		if ((ufstat & info->tx_fifomask) != 0 ||
 		    (ufstat & info->tx_fifofull))
 			return 0;
-
-		return 1;
+		return TIOCSER_TEMT;
 	}
 
-	return s3c24xx_serial_txempty_nofifo(port);
+	return s3c24xx_serial_txempty_nofifo(port) ? TIOCSER_TEMT : 0;
 }
 
 /* no modem control lines */
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 39fa9ae509..e383d9a10a 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2603,7 +2603,12 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
 			port->type = PORT_UNKNOWN;
 			flags |= UART_CONFIG_TYPE;
 		}
+		/* Synchronize with possible boot console. */
+		if (uart_console(port))
+			console_lock();
 		port->ops->config_port(port, flags);
+		if (uart_console(port))
+			console_unlock();
 	}
 
 	if (port->type != PORT_UNKNOWN) {
@@ -2611,6 +2616,10 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
 
 		uart_report_port(drv, port);
 
+		/* Synchronize with possible boot console. */
+		if (uart_console(port))
+			console_lock();
+
 		/* Power up port for set_mctrl() */
 		uart_change_pm(state, UART_PM_STATE_ON);
 
@@ -2627,6 +2636,9 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
 
 		uart_rs485_config(port);
 
+		if (uart_console(port))
+			console_unlock();
+
 		/*
 		 * If this driver supports console, and it hasn't been
 		 * successfully registered yet, try to re-register it.
diff --git a/drivers/tty/serial/serial_port.c b/drivers/tty/serial/serial_port.c
index 88975a4df3..72b6f4f326 100644
--- a/drivers/tty/serial/serial_port.c
+++ b/drivers/tty/serial/serial_port.c
@@ -46,8 +46,31 @@ out:
 	return 0;
 }
 
+static int serial_port_runtime_suspend(struct device *dev)
+{
+	struct serial_port_device *port_dev = to_serial_base_port_device(dev);
+	struct uart_port *port = port_dev->port;
+	unsigned long flags;
+	bool busy;
+
+	if (port->flags & UPF_DEAD)
+		return 0;
+
+	uart_port_lock_irqsave(port, &flags);
+	busy = __serial_port_busy(port);
+	if (busy)
+		port->ops->start_tx(port);
+	uart_port_unlock_irqrestore(port, flags);
+
+	if (busy)
+		pm_runtime_mark_last_busy(dev);
+
+	return busy ? -EBUSY : 0;
+}
+
 static DEFINE_RUNTIME_DEV_PM_OPS(serial_port_pm,
-				 NULL, serial_port_runtime_resume, NULL);
+				 serial_port_runtime_suspend,
+				 serial_port_runtime_resume, NULL);
 
 static int serial_port_probe(struct device *dev)
 {
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 156efda7c8..52e6ca1ba2 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -381,7 +381,7 @@ static void vc_uniscr_delete(struct vc_data *vc, unsigned int nr)
 		u32 *ln = vc->vc_uni_lines[vc->state.y];
 		unsigned int x = vc->state.x, cols = vc->vc_cols;
 
-		memcpy(&ln[x], &ln[x + nr], (cols - x - nr) * sizeof(*ln));
+		memmove(&ln[x], &ln[x + nr], (cols - x - nr) * sizeof(*ln));
 		memset32(&ln[cols - nr], ' ', nr);
 	}
 }
@@ -2469,7 +2469,7 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
 		}
 		return;
 	case EScsiignore:
-		if (c >= 20 && c <= 0x3f)
+		if (c >= 0x20 && c <= 0x3f)
 			return;
 		vc->vc_state = ESnormal;
 		return;