Adding upstream version 6.10.3.upstream/6.10.3

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

9 files changed, 176 insertions, 48 deletions

diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index 5635e4d7ec..9919ab725d 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -249,6 +249,11 @@ void dwc2_hib_restore_common(struct dwc2_hsotg *hsotg, int rem_wakeup,
 	dwc2_writel(hsotg, gpwrdn, GPWRDN);
 	udelay(10);
 
+	/* Reset ULPI latch */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn &= ~GPWRDN_ULPI_LATCH_EN_DURING_HIB_ENTRY;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+
 	/* Disable PMU interrupt */
 	gpwrdn = dwc2_readl(hsotg, GPWRDN);
 	gpwrdn &= ~GPWRDN_PMUINTSEL;
@@ -975,6 +980,41 @@ void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg)
 	dwc2_writel(hsotg, hcfg, HCFG);
 }
 
+static void dwc2_set_clock_switch_timer(struct dwc2_hsotg *hsotg)
+{
+	u32 grstctl, gsnpsid, val = 0;
+
+	gsnpsid = dwc2_readl(hsotg, GSNPSID);
+
+	/*
+	 * Applicable only to HSOTG core v5.00a or higher.
+	 * Not applicable to HS/FS IOT devices.
+	 */
+	if ((gsnpsid & ~DWC2_CORE_REV_MASK) != DWC2_OTG_ID ||
+	    gsnpsid < DWC2_CORE_REV_5_00a)
+		return;
+
+	if ((hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI &&
+	     hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_NOT_SUPPORTED) ||
+	    (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
+	     hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_NOT_SUPPORTED) ||
+	    (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED &&
+	     hsotg->hw_params.fs_phy_type != GHWCFG2_FS_PHY_TYPE_NOT_SUPPORTED)) {
+		val = GRSTCTL_CLOCK_SWITH_TIMER_VALUE_DIS;
+	}
+
+	if (hsotg->params.speed == DWC2_SPEED_PARAM_LOW &&
+	    hsotg->hw_params.hs_phy_type != GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED &&
+	    hsotg->hw_params.fs_phy_type != GHWCFG2_FS_PHY_TYPE_NOT_SUPPORTED) {
+		val = GRSTCTL_CLOCK_SWITH_TIMER_VALUE_147;
+	}
+
+	grstctl = dwc2_readl(hsotg, GRSTCTL);
+	grstctl &= ~GRSTCTL_CLOCK_SWITH_TIMER_MASK;
+	grstctl |= GRSTCTL_CLOCK_SWITH_TIMER(val);
+	dwc2_writel(hsotg, grstctl, GRSTCTL);
+}
+
 static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
 {
 	u32 usbcfg, ggpio, i2cctl;
@@ -992,6 +1032,8 @@ static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
 			usbcfg |= GUSBCFG_PHYSEL;
 			dwc2_writel(hsotg, usbcfg, GUSBCFG);
 
+			dwc2_set_clock_switch_timer(hsotg);
+
 			/* Reset after a PHY select */
 			retval = dwc2_core_reset(hsotg, false);
 
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index a141f83aba..2bd74f3033 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -288,6 +288,11 @@ enum dwc2_ep0_state {
  *                      core has been configured to work at either data path
  *                      width.
  *                       8 or 16 (default 16 if available)
+ * @eusb2_disc:         Specifies whether eUSB2 PHY disconnect support flow
+ *                      applicable or no. Applicable in device mode of HSOTG
+ *                      and HS IOT cores v5.00 or higher.
+ *                       0 - eUSB2 PHY disconnect support flow not applicable
+ *                       1 - eUSB2 PHY disconnect support flow applicable
  * @phy_ulpi_ddr:       Specifies whether the ULPI operates at double or single
  *                      data rate. This parameter is only applicable if phy_type
  *                      is ULPI.
@@ -442,6 +447,7 @@ struct dwc2_core_params {
 #define DWC2_SPEED_PARAM_LOW	2
 
 	u8 phy_utmi_width;
+	bool eusb2_disc;
 	bool phy_ulpi_ddr;
 	bool phy_ulpi_ext_vbus;
 	bool enable_dynamic_fifo;
@@ -1110,8 +1116,10 @@ struct dwc2_hsotg {
 #define DWC2_CORE_REV_3_10a	0x4f54310a
 #define DWC2_CORE_REV_4_00a	0x4f54400a
 #define DWC2_CORE_REV_4_20a	0x4f54420a
+#define DWC2_CORE_REV_5_00a	0x4f54500a
 #define DWC2_FS_IOT_REV_1_00a	0x5531100a
 #define DWC2_HS_IOT_REV_1_00a	0x5532100a
+#define DWC2_HS_IOT_REV_5_00a	0x5532500a
 #define DWC2_CORE_REV_MASK	0x0000ffff
 
 	/* DWC OTG HW Core ID */
diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
index 26d752a4c3..7d3e641806 100644
--- a/drivers/usb/dwc2/core_intr.c
+++ b/drivers/usb/dwc2/core_intr.c
@@ -84,6 +84,7 @@ static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
 	u32 gotgint;
 	u32 gotgctl;
 	u32 gintmsk;
+	u32 pcgctl;
 
 	gotgint = dwc2_readl(hsotg, GOTGINT);
 	gotgctl = dwc2_readl(hsotg, GOTGCTL);
@@ -96,8 +97,22 @@ static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
 			dwc2_op_state_str(hsotg));
 		gotgctl = dwc2_readl(hsotg, GOTGCTL);
 
-		if (dwc2_is_device_mode(hsotg))
+		if (dwc2_is_device_mode(hsotg)) {
+			if (hsotg->params.eusb2_disc) {
+				/* Clear the Gate hclk. */
+				pcgctl = dwc2_readl(hsotg, PCGCTL);
+				pcgctl &= ~PCGCTL_GATEHCLK;
+				dwc2_writel(hsotg, pcgctl, PCGCTL);
+				udelay(5);
+
+				/* Clear Phy Clock bit. */
+				pcgctl = dwc2_readl(hsotg, PCGCTL);
+				pcgctl &= ~PCGCTL_STOPPCLK;
+				dwc2_writel(hsotg, pcgctl, PCGCTL);
+				udelay(5);
+			}
 			dwc2_hsotg_disconnect(hsotg);
+		}
 
 		if (hsotg->op_state == OTG_STATE_B_HOST) {
 			hsotg->op_state = OTG_STATE_B_PERIPHERAL;
@@ -117,7 +132,7 @@ static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
 			 * disconnected
 			 */
 			/* Reset to a clean state */
-			hsotg->lx_state = DWC2_L0;
+			hsotg->lx_state = DWC2_L3;
 		}
 
 		gotgctl = dwc2_readl(hsotg, GOTGCTL);
@@ -286,7 +301,7 @@ static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg)
 		hsotg->lx_state);
 
 	if (dwc2_is_device_mode(hsotg)) {
-		if (hsotg->lx_state == DWC2_L2) {
+		if (hsotg->lx_state != DWC2_L0) {
 			if (hsotg->in_ppd) {
 				ret = dwc2_exit_partial_power_down(hsotg, 0,
 								   true);
@@ -714,6 +729,11 @@ static inline void dwc_handle_gpwrdn_disc_det(struct dwc2_hsotg *hsotg,
 	gpwrdn_tmp &= ~GPWRDN_PMUINTSEL;
 	dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
 
+	/* Reset ULPI latch */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn &= ~GPWRDN_ULPI_LATCH_EN_DURING_HIB_ENTRY;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+
 	/* De-assert Wakeup Logic */
 	gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
 	gpwrdn_tmp &= ~GPWRDN_PMUACTV;
diff --git a/drivers/usb/dwc2/debugfs.c b/drivers/usb/dwc2/debugfs.c
index 1d72ece9cf..7c82ab5904 100644
--- a/drivers/usb/dwc2/debugfs.c
+++ b/drivers/usb/dwc2/debugfs.c
@@ -686,6 +686,7 @@ static int params_show(struct seq_file *seq, void *v)
 	print_param(seq, p, host_channels);
 	print_param(seq, p, phy_type);
 	print_param(seq, p, phy_utmi_width);
+	print_param(seq, p, eusb2_disc);
 	print_param(seq, p, phy_ulpi_ddr);
 	print_param(seq, p, phy_ulpi_ext_vbus);
 	print_param(seq, p, i2c_enable);
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index b2f6da5b65..74ac79abd8 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3424,8 +3424,11 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
 
 	dwc2_hsotg_init_fifo(hsotg);
 
-	if (!is_usb_reset)
+	if (!is_usb_reset) {
 		dwc2_set_bit(hsotg, DCTL, DCTL_SFTDISCON);
+		if (hsotg->params.eusb2_disc)
+			dwc2_set_bit(hsotg, GOTGCTL, GOTGCTL_EUSB2_DISC_SUPP);
+	}
 
 	dcfg |= DCFG_EPMISCNT(1);
 
@@ -5316,6 +5319,8 @@ void dwc2_gadget_program_ref_clk(struct dwc2_hsotg *hsotg)
 int dwc2_gadget_enter_hibernation(struct dwc2_hsotg *hsotg)
 {
 	u32 gpwrdn;
+	u32 gusbcfg;
+	u32 pcgcctl;
 	int ret = 0;
 
 	/* Change to L2(suspend) state */
@@ -5335,6 +5340,22 @@ int dwc2_gadget_enter_hibernation(struct dwc2_hsotg *hsotg)
 	}
 
 	gpwrdn = GPWRDN_PWRDNRSTN;
+	udelay(10);
+	gusbcfg = dwc2_readl(hsotg, GUSBCFG);
+	if (gusbcfg & GUSBCFG_ULPI_UTMI_SEL) {
+		/* ULPI interface */
+		gpwrdn |= GPWRDN_ULPI_LATCH_EN_DURING_HIB_ENTRY;
+	}
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	udelay(10);
+
+	/* Suspend the Phy Clock */
+	pcgcctl = dwc2_readl(hsotg, PCGCTL);
+	pcgcctl |= PCGCTL_STOPPCLK;
+	dwc2_writel(hsotg, pcgcctl, PCGCTL);
+	udelay(10);
+
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
 	gpwrdn |= GPWRDN_PMUACTV;
 	dwc2_writel(hsotg, gpwrdn, GPWRDN);
 	udelay(10);
@@ -5435,6 +5456,11 @@ int dwc2_gadget_exit_hibernation(struct dwc2_hsotg *hsotg,
 	if (reset)
 		dwc2_clear_bit(hsotg, DCFG, DCFG_DEVADDR_MASK);
 
+	/* Reset ULPI latch */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn &= ~GPWRDN_ULPI_LATCH_EN_DURING_HIB_ENTRY;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+
 	/* De-assert Wakeup Logic */
 	gpwrdn = dwc2_readl(hsotg, GPWRDN);
 	gpwrdn &= ~GPWRDN_PMUACTV;
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index dd5b1c5691..cb54390e7d 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -5525,6 +5525,11 @@ int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg)
 	gusbcfg = dwc2_readl(hsotg, GUSBCFG);
 	if (gusbcfg & GUSBCFG_ULPI_UTMI_SEL) {
 		/* ULPI interface */
+		udelay(10);
+		gpwrdn = dwc2_readl(hsotg, GPWRDN);
+		gpwrdn |= GPWRDN_ULPI_LATCH_EN_DURING_HIB_ENTRY;
+		dwc2_writel(hsotg, gpwrdn, GPWRDN);
+		udelay(10);
 		/* Suspend the Phy Clock */
 		pcgcctl = dwc2_readl(hsotg, PCGCTL);
 		pcgcctl |= PCGCTL_STOPPCLK;
@@ -5631,6 +5636,11 @@ int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup,
 	dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG);
 	dwc2_writel(hsotg, hr->hcfg, HCFG);
 
+	/* Reset ULPI latch */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn &= ~GPWRDN_ULPI_LATCH_EN_DURING_HIB_ENTRY;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+
 	/* De-assert Wakeup Logic */
 	if (!(rem_wakeup && hsotg->hw_params.snpsid >= DWC2_CORE_REV_4_30a)) {
 		gpwrdn = dwc2_readl(hsotg, GPWRDN);
diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c
index 0d4495c6b9..238c6fd50e 100644
--- a/drivers/usb/dwc2/hcd_queue.c
+++ b/drivers/usb/dwc2/hcd_queue.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
+#include <linux/seq_buf.h>
 #include <linux/slab.h>
 #include <linux/usb.h>
 
@@ -360,41 +361,6 @@ static unsigned long *dwc2_get_ls_map(struct dwc2_hsotg *hsotg,
 
 #ifdef DWC2_PRINT_SCHEDULE
 /*
- * cat_printf() - A printf() + strcat() helper
- *
- * This is useful for concatenating a bunch of strings where each string is
- * constructed using printf.
- *
- * @buf:   The destination buffer; will be updated to point after the printed
- *         data.
- * @size:  The number of bytes in the buffer (includes space for '\0').
- * @fmt:   The format for printf.
- * @...:   The args for printf.
- */
-static __printf(3, 4)
-void cat_printf(char **buf, size_t *size, const char *fmt, ...)
-{
-	va_list args;
-	int i;
-
-	if (*size == 0)
-		return;
-
-	va_start(args, fmt);
-	i = vsnprintf(*buf, *size, fmt, args);
-	va_end(args);
-
-	if (i >= *size) {
-		(*buf)[*size - 1] = '\0';
-		*buf += *size;
-		*size = 0;
-	} else {
-		*buf += i;
-		*size -= i;
-	}
-}
-
-/*
  * pmap_print() - Print the given periodic map
  *
  * Will attempt to print out the periodic schedule.
@@ -416,9 +382,7 @@ static void pmap_print(unsigned long *map, int bits_per_period,
 	int period;
 
 	for (period = 0; period < periods_in_map; period++) {
-		char tmp[64];
-		char *buf = tmp;
-		size_t buf_size = sizeof(tmp);
+		DECLARE_SEQ_BUF(buf, 64);
 		int period_start = period * bits_per_period;
 		int period_end = period_start + bits_per_period;
 		int start = 0;
@@ -442,19 +406,19 @@ static void pmap_print(unsigned long *map, int bits_per_period,
 				continue;
 
 			if (!printed)
-				cat_printf(&buf, &buf_size, "%s %d: ",
-					   period_name, period);
+				seq_buf_printf(&buf, "%s %d: ",
+					       period_name, period);
 			else
-				cat_printf(&buf, &buf_size, ", ");
+				seq_buf_puts(&buf, ", ");
 			printed = true;
 
-			cat_printf(&buf, &buf_size, "%d %s -%3d %s", start,
-				   units, start + count - 1, units);
+			seq_buf_printf(&buf, "%d %s -%3d %s", start,
+				       units, start + count - 1, units);
 			count = 0;
 		}
 
 		if (printed)
-			print_fn(tmp, print_data);
+			print_fn(seq_buf_str(&buf), print_data);
 	}
 }
 
diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h
index 12f8c7f86d..fe8c87a2f8 100644
--- a/drivers/usb/dwc2/hw.h
+++ b/drivers/usb/dwc2/hw.h
@@ -11,6 +11,7 @@
 #define HSOTG_REG(x)	(x)
 
 #define GOTGCTL				HSOTG_REG(0x000)
+#define GOTGCTL_EUSB2_DISC_SUPP	BIT(28)
 #define GOTGCTL_CHIRPEN			BIT(27)
 #define GOTGCTL_MULT_VALID_BC_MASK	(0x1f << 22)
 #define GOTGCTL_MULT_VALID_BC_SHIFT	22
@@ -98,6 +99,17 @@
 #define GRSTCTL_AHBIDLE			BIT(31)
 #define GRSTCTL_DMAREQ			BIT(30)
 #define GRSTCTL_CSFTRST_DONE		BIT(29)
+#define GRSTCTL_CLOCK_SWITH_TIMER_MASK		(0x7 << 11)
+#define GRSTCTL_CLOCK_SWITH_TIMER_SHIFT		11
+#define GRSTCTL_CLOCK_SWITH_TIMER_VALUE_19		0x0
+#define GRSTCTL_CLOCK_SWITH_TIMER_VALUE_15		0x1
+#define GRSTCTL_CLOCK_SWITH_TIMER_VALUE_147		0x2
+#define GRSTCTL_CLOCK_SWITH_TIMER_VALUE_50		0x3
+#define GRSTCTL_CLOCK_SWITH_TIMER_VALUE_100		0x4
+#define GRSTCTL_CLOCK_SWITH_TIMER_VALUE_125		0x5
+#define GRSTCTL_CLOCK_SWITH_TIMER_VALUE_200		0x6
+#define GRSTCTL_CLOCK_SWITH_TIMER_VALUE_DIS		0x7
+#define GRSTCTL_CLOCK_SWITH_TIMER(_x)		((_x) << 11)
 #define GRSTCTL_TXFNUM_MASK		(0x1f << 6)
 #define GRSTCTL_TXFNUM_SHIFT		6
 #define GRSTCTL_TXFNUM_LIMIT		0x1f
@@ -332,6 +344,8 @@
 #define GLPMCFG_LPMCAP			BIT(0)
 
 #define GPWRDN				HSOTG_REG(0x0058)
+
+#define GPWRDN_ULPI_LATCH_EN_DURING_HIB_ENTRY	BIT(29)
 #define GPWRDN_MULT_VAL_ID_BC_MASK	(0x1f << 24)
 #define GPWRDN_MULT_VAL_ID_BC_SHIFT	24
 #define GPWRDN_ADP_INT			BIT(23)
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index eb677c3cfd..5a1500d0bd 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -201,6 +201,25 @@ static void dwc2_set_amcc_params(struct dwc2_hsotg *hsotg)
 	p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT;
 }
 
+static void dwc2_set_cv1800_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->otg_caps.hnp_support = false;
+	p->otg_caps.srp_support = false;
+	p->host_dma = false;
+	p->g_dma = false;
+	p->speed = DWC2_SPEED_PARAM_HIGH;
+	p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI;
+	p->phy_utmi_width = 16;
+	p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT;
+	p->lpm = false;
+	p->lpm_clock_gating = false;
+	p->besl = false;
+	p->hird_threshold_en = false;
+	p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
+}
+
 static void dwc2_set_stm32f4x9_fsotg_params(struct dwc2_hsotg *hsotg)
 {
 	struct dwc2_core_params *p = &hsotg->params;
@@ -295,6 +314,8 @@ const struct of_device_id dwc2_of_match_table[] = {
 	  .data = dwc2_set_amlogic_a1_params },
 	{ .compatible = "amcc,dwc-otg", .data = dwc2_set_amcc_params },
 	{ .compatible = "apm,apm82181-dwc-otg", .data = dwc2_set_amcc_params },
+	{ .compatible = "sophgo,cv1800-usb",
+	  .data = dwc2_set_cv1800_params },
 	{ .compatible = "st,stm32f4x9-fsotg",
 	  .data = dwc2_set_stm32f4x9_fsotg_params },
 	{ .compatible = "st,stm32f4x9-hsotg" },
@@ -475,6 +496,7 @@ static void dwc2_set_default_params(struct dwc2_hsotg *hsotg)
 	dwc2_set_param_lpm(hsotg);
 	p->phy_ulpi_ddr = false;
 	p->phy_ulpi_ext_vbus = false;
+	p->eusb2_disc = false;
 
 	p->enable_dynamic_fifo = hw->enable_dynamic_fifo;
 	p->en_multiple_tx_fifo = hw->en_multiple_tx_fifo;
@@ -737,6 +759,25 @@ static void dwc2_check_param_tx_fifo_sizes(struct dwc2_hsotg *hsotg)
 	}
 }
 
+static void dwc2_check_param_eusb2_disc(struct dwc2_hsotg *hsotg)
+{
+	u32 gsnpsid;
+
+	if (!hsotg->params.eusb2_disc)
+		return;
+	gsnpsid = dwc2_readl(hsotg, GSNPSID);
+	/*
+	 * eusb2_disc not supported by FS IOT devices.
+	 * For other cores, it supported starting from version 5.00a
+	 */
+	if ((gsnpsid & ~DWC2_CORE_REV_MASK) == DWC2_FS_IOT_ID ||
+	    (gsnpsid & DWC2_CORE_REV_MASK) <
+	    (DWC2_CORE_REV_5_00a & DWC2_CORE_REV_MASK)) {
+		hsotg->params.eusb2_disc = false;
+		return;
+	}
+}
+
 #define CHECK_RANGE(_param, _min, _max, _def) do {			\
 		if ((int)(hsotg->params._param) < (_min) ||		\
 		    (hsotg->params._param) > (_max)) {			\
@@ -765,6 +806,8 @@ static void dwc2_check_params(struct dwc2_hsotg *hsotg)
 	dwc2_check_param_speed(hsotg);
 	dwc2_check_param_phy_utmi_width(hsotg);
 	dwc2_check_param_power_down(hsotg);
+	dwc2_check_param_eusb2_disc(hsotg);
+
 	CHECK_BOOL(enable_dynamic_fifo, hw->enable_dynamic_fifo);
 	CHECK_BOOL(en_multiple_tx_fifo, hw->en_multiple_tx_fifo);
 	CHECK_BOOL(i2c_enable, hw->i2c_enable);