Merging upstream version 6.9.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

10 files changed, 144 insertions, 323 deletions

diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 5fc27b20df..31078f3d41 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -131,7 +131,7 @@ config USB_DWC3_QCOM
 	tristate "Qualcomm Platform"
 	depends on ARCH_QCOM || COMPILE_TEST
 	depends on EXTCON || !EXTCON
-	depends on (OF || ACPI)
+	depends on OF
 	default USB_DWC3
 	help
 	  Some Qualcomm SoCs use DesignWare Core IP for USB2/3
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index d96a28eecb..180dd8d292 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -755,6 +755,7 @@ struct dwc3_ep {
 #define DWC3_EP_PENDING_CLEAR_STALL	BIT(11)
 #define DWC3_EP_TXFIFO_RESIZED		BIT(12)
 #define DWC3_EP_DELAY_STOP             BIT(13)
+#define DWC3_EP_RESOURCE_ALLOCATED	BIT(14)
 
 	/* This last one is specific to EP0 */
 #define DWC3_EP0_DIR_IN			BIT(31)
@@ -1258,6 +1259,7 @@ struct dwc3 {
 #define DWC31_REVISION_170A	0x3137302a
 #define DWC31_REVISION_180A	0x3138302a
 #define DWC31_REVISION_190A	0x3139302a
+#define DWC31_REVISION_200A	0x3230302a
 
 #define DWC32_REVISION_ANY	0x0
 #define DWC32_REVISION_100A	0x3130302a
diff --git a/drivers/usb/dwc3/dwc3-am62.c b/drivers/usb/dwc3/dwc3-am62.c
index ea6e29091c..fad151e78f 100644
--- a/drivers/usb/dwc3/dwc3-am62.c
+++ b/drivers/usb/dwc3/dwc3-am62.c
@@ -97,9 +97,15 @@
 #define USBSS_VBUS_STAT_SESSVALID	BIT(2)
 #define USBSS_VBUS_STAT_VBUSVALID	BIT(0)
 
-/* Mask for PHY PLL REFCLK */
+/* USB_PHY_CTRL register bits in CTRL_MMR */
+#define PHY_CORE_VOLTAGE_MASK	BIT(31)
 #define PHY_PLL_REFCLK_MASK	GENMASK(3, 0)
 
+/* USB PHY2 register offsets */
+#define	USB_PHY_PLL_REG12		0x130
+#define	USB_PHY_PLL_LDO_REF_EN		BIT(5)
+#define	USB_PHY_PLL_LDO_REF_EN_EN	BIT(4)
+
 #define DWC3_AM62_AUTOSUSPEND_DELAY	100
 
 struct dwc3_am62 {
@@ -162,6 +168,13 @@ static int phy_syscon_pll_refclk(struct dwc3_am62 *am62)
 
 	am62->offset = args.args[0];
 
+	/* Core voltage. PHY_CORE_VOLTAGE bit Recommended to be 0 always */
+	ret = regmap_update_bits(am62->syscon, am62->offset, PHY_CORE_VOLTAGE_MASK, 0);
+	if (ret) {
+		dev_err(dev, "failed to set phy core voltage\n");
+		return ret;
+	}
+
 	ret = regmap_update_bits(am62->syscon, am62->offset, PHY_PLL_REFCLK_MASK, am62->rate_code);
 	if (ret) {
 		dev_err(dev, "failed to set phy pll reference clock rate\n");
@@ -176,8 +189,9 @@ static int dwc3_ti_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *node = pdev->dev.of_node;
 	struct dwc3_am62 *am62;
-	int i, ret;
 	unsigned long rate;
+	void __iomem *phy;
+	int i, ret;
 	u32 reg;
 
 	am62 = devm_kzalloc(dev, sizeof(*am62), GFP_KERNEL);
@@ -219,6 +233,17 @@ static int dwc3_ti_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	/* Workaround Errata i2409 */
+	phy = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(phy)) {
+		dev_err(dev, "can't map PHY IOMEM resource. Won't apply i2409 fix.\n");
+		phy = NULL;
+	} else {
+		reg = readl(phy + USB_PHY_PLL_REG12);
+		reg |= USB_PHY_PLL_LDO_REF_EN | USB_PHY_PLL_LDO_REF_EN_EN;
+		writel(reg, phy + USB_PHY_PLL_REG12);
+	}
+
 	/* VBUS divider select */
 	am62->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider");
 	reg = dwc3_ti_readl(am62, USBSS_PHY_CONFIG);
diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
index d1539fc9ea..be7be00ecb 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -52,8 +52,7 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
 	if (of_device_is_compatible(np, "rockchip,rk3399-dwc3"))
 		simple->need_reset = true;
 
-	simple->resets = of_reset_control_array_get(np, false, true,
-						    true);
+	simple->resets = of_reset_control_array_get_optional_exclusive(np);
 	if (IS_ERR(simple->resets)) {
 		ret = PTR_ERR(simple->resets);
 		dev_err(dev, "failed to get device resets, err=%d\n", ret);
@@ -173,6 +172,7 @@ static const struct of_device_id of_dwc3_simple_match[] = {
 	{ .compatible = "sprd,sc9860-dwc3" },
 	{ .compatible = "allwinner,sun50i-h6-dwc3" },
 	{ .compatible = "hisilicon,hi3670-dwc3" },
+	{ .compatible = "hisilicon,hi3798mv200-dwc3" },
 	{ .compatible = "intel,keembay-dwc3" },
 	{ /* Sentinel */ }
 };
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 497deed38c..9ef821ca2f 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -8,6 +8,7 @@
  *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
  */
 
+#include <linux/dmi.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -220,6 +221,7 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc,
 
 		if (pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
 			struct gpio_desc *gpio;
+			const char *bios_ver;
 			int ret;
 
 			/* On BYT the FW does not always enable the refclock */
@@ -277,8 +279,12 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc,
 			 * detection. These can be identified by them _not_
 			 * using the standard ACPI battery and ac drivers.
 			 */
+			bios_ver = dmi_get_system_info(DMI_BIOS_VERSION);
 			if (acpi_dev_present("INT33FD", "1", 2) &&
-			    acpi_quirk_skip_acpi_ac_and_battery()) {
+			    acpi_quirk_skip_acpi_ac_and_battery() &&
+			    /* Lenovo Yoga Tablet 2 Pro 1380 uses LC824206XA instead */
+			    !(bios_ver &&
+			      strstarts(bios_ver, "BLADE_21.X64.0005.R00.1504101516"))) {
 				dev_info(&pdev->dev, "Using TUSB1211 phy for charger detection\n");
 				swnode = &dwc3_pci_intel_phy_charger_detect_swnode;
 			}
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index dbd6a5b2b2..f6b2fab49d 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -4,7 +4,6 @@
  * Inspired by dwc3-of-simple.c
  */
 
-#include <linux/acpi.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/clk.h>
@@ -53,22 +52,10 @@
 #define APPS_USB_AVG_BW 0
 #define APPS_USB_PEAK_BW MBps_to_icc(40)
 
-struct dwc3_acpi_pdata {
-	u32			qscratch_base_offset;
-	u32			qscratch_base_size;
-	u32			dwc3_core_base_size;
-	int			qusb2_phy_irq_index;
-	int			dp_hs_phy_irq_index;
-	int			dm_hs_phy_irq_index;
-	int			ss_phy_irq_index;
-	bool			is_urs;
-};
-
 struct dwc3_qcom {
 	struct device		*dev;
 	void __iomem		*qscratch_base;
 	struct platform_device	*dwc3;
-	struct platform_device	*urs_usb;
 	struct clk		**clks;
 	int			num_clocks;
 	struct reset_control	*resets;
@@ -84,8 +71,6 @@ struct dwc3_qcom {
 	struct notifier_block	vbus_nb;
 	struct notifier_block	host_nb;
 
-	const struct dwc3_acpi_pdata *acpi_pdata;
-
 	enum usb_dr_mode	mode;
 	bool			is_suspended;
 	bool			pm_suspended;
@@ -248,9 +233,6 @@ static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom)
 	struct device *dev = qcom->dev;
 	int ret;
 
-	if (has_acpi_companion(dev))
-		return 0;
-
 	qcom->icc_path_ddr = of_icc_get(dev, "usb-ddr");
 	if (IS_ERR(qcom->icc_path_ddr)) {
 		return dev_err_probe(dev, PTR_ERR(qcom->icc_path_ddr),
@@ -519,31 +501,13 @@ static void dwc3_qcom_select_utmi_clk(struct dwc3_qcom *qcom)
 			  PIPE_UTMI_CLK_DIS);
 }
 
-static int dwc3_qcom_get_irq(struct platform_device *pdev,
-			     const char *name, int num)
-{
-	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
-	struct platform_device *pdev_irq = qcom->urs_usb ? qcom->urs_usb : pdev;
-	struct device_node *np = pdev->dev.of_node;
-	int ret;
-
-	if (np)
-		ret = platform_get_irq_byname_optional(pdev_irq, name);
-	else
-		ret = platform_get_irq_optional(pdev_irq, num);
-
-	return ret;
-}
-
 static int dwc3_qcom_setup_irq(struct platform_device *pdev)
 {
 	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
-	const struct dwc3_acpi_pdata *pdata = qcom->acpi_pdata;
 	int irq;
 	int ret;
 
-	irq = dwc3_qcom_get_irq(pdev, "qusb2_phy",
-				pdata ? pdata->qusb2_phy_irq_index : -1);
+	irq = platform_get_irq_byname_optional(pdev, "qusb2_phy");
 	if (irq > 0) {
 		/* Keep wakeup interrupts disabled until suspend */
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
@@ -557,8 +521,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
 		qcom->qusb2_phy_irq = irq;
 	}
 
-	irq = dwc3_qcom_get_irq(pdev, "dp_hs_phy_irq",
-				pdata ? pdata->dp_hs_phy_irq_index : -1);
+	irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_irq");
 	if (irq > 0) {
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 					qcom_dwc3_resume_irq,
@@ -571,8 +534,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
 		qcom->dp_hs_phy_irq = irq;
 	}
 
-	irq = dwc3_qcom_get_irq(pdev, "dm_hs_phy_irq",
-				pdata ? pdata->dm_hs_phy_irq_index : -1);
+	irq = platform_get_irq_byname_optional(pdev, "dm_hs_phy_irq");
 	if (irq > 0) {
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 					qcom_dwc3_resume_irq,
@@ -585,8 +547,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
 		qcom->dm_hs_phy_irq = irq;
 	}
 
-	irq = dwc3_qcom_get_irq(pdev, "ss_phy_irq",
-				pdata ? pdata->ss_phy_irq_index : -1);
+	irq = platform_get_irq_byname_optional(pdev, "ss_phy_irq");
 	if (irq > 0) {
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 					qcom_dwc3_resume_irq,
@@ -649,88 +610,6 @@ static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count)
 	return 0;
 }
 
-static const struct property_entry dwc3_qcom_acpi_properties[] = {
-	PROPERTY_ENTRY_STRING("dr_mode", "host"),
-	{}
-};
-
-static const struct software_node dwc3_qcom_swnode = {
-	.properties = dwc3_qcom_acpi_properties,
-};
-
-static int dwc3_qcom_acpi_register_core(struct platform_device *pdev)
-{
-	struct dwc3_qcom	*qcom = platform_get_drvdata(pdev);
-	struct device		*dev = &pdev->dev;
-	struct resource		*res, *child_res = NULL;
-	struct platform_device	*pdev_irq = qcom->urs_usb ? qcom->urs_usb :
-							    pdev;
-	int			irq;
-	int			ret;
-
-	qcom->dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
-	if (!qcom->dwc3)
-		return -ENOMEM;
-
-	qcom->dwc3->dev.parent = dev;
-	qcom->dwc3->dev.type = dev->type;
-	qcom->dwc3->dev.dma_mask = dev->dma_mask;
-	qcom->dwc3->dev.dma_parms = dev->dma_parms;
-	qcom->dwc3->dev.coherent_dma_mask = dev->coherent_dma_mask;
-
-	child_res = kcalloc(2, sizeof(*child_res), GFP_KERNEL);
-	if (!child_res) {
-		platform_device_put(qcom->dwc3);
-		return -ENOMEM;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "failed to get memory resource\n");
-		ret = -ENODEV;
-		goto out;
-	}
-
-	child_res[0].flags = res->flags;
-	child_res[0].start = res->start;
-	child_res[0].end = child_res[0].start +
-		qcom->acpi_pdata->dwc3_core_base_size;
-
-	irq = platform_get_irq(pdev_irq, 0);
-	if (irq < 0) {
-		ret = irq;
-		goto out;
-	}
-	child_res[1].flags = IORESOURCE_IRQ;
-	child_res[1].start = child_res[1].end = irq;
-
-	ret = platform_device_add_resources(qcom->dwc3, child_res, 2);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add resources\n");
-		goto out;
-	}
-
-	ret = device_add_software_node(&qcom->dwc3->dev, &dwc3_qcom_swnode);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to add properties\n");
-		goto out;
-	}
-
-	ret = platform_device_add(qcom->dwc3);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add device\n");
-		device_remove_software_node(&qcom->dwc3->dev);
-		goto out;
-	}
-	kfree(child_res);
-	return 0;
-
-out:
-	platform_device_put(qcom->dwc3);
-	kfree(child_res);
-	return ret;
-}
-
 static int dwc3_qcom_of_register_core(struct platform_device *pdev)
 {
 	struct dwc3_qcom	*qcom = platform_get_drvdata(pdev);
@@ -763,57 +642,12 @@ node_put:
 	return ret;
 }
 
-static struct platform_device *dwc3_qcom_create_urs_usb_platdev(struct device *dev)
-{
-	struct platform_device *urs_usb = NULL;
-	struct fwnode_handle *fwh;
-	struct acpi_device *adev;
-	char name[8];
-	int ret;
-	int id;
-
-	/* Figure out device id */
-	ret = sscanf(fwnode_get_name(dev->fwnode), "URS%d", &id);
-	if (!ret)
-		return NULL;
-
-	/* Find the child using name */
-	snprintf(name, sizeof(name), "USB%d", id);
-	fwh = fwnode_get_named_child_node(dev->fwnode, name);
-	if (!fwh)
-		return NULL;
-
-	adev = to_acpi_device_node(fwh);
-	if (!adev)
-		goto err_put_handle;
-
-	urs_usb = acpi_create_platform_device(adev, NULL);
-	if (IS_ERR_OR_NULL(urs_usb))
-		goto err_put_handle;
-
-	return urs_usb;
-
-err_put_handle:
-	fwnode_handle_put(fwh);
-
-	return urs_usb;
-}
-
-static void dwc3_qcom_destroy_urs_usb_platdev(struct platform_device *urs_usb)
-{
-	struct fwnode_handle *fwh = urs_usb->dev.fwnode;
-
-	platform_device_unregister(urs_usb);
-	fwnode_handle_put(fwh);
-}
-
 static int dwc3_qcom_probe(struct platform_device *pdev)
 {
 	struct device_node	*np = pdev->dev.of_node;
 	struct device		*dev = &pdev->dev;
 	struct dwc3_qcom	*qcom;
-	struct resource		*res, *parent_res = NULL;
-	struct resource		local_res;
+	struct resource		*res;
 	int			ret, i;
 	bool			ignore_pipe_clk;
 	bool			wakeup_source;
@@ -825,14 +659,6 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, qcom);
 	qcom->dev = &pdev->dev;
 
-	if (has_acpi_companion(dev)) {
-		qcom->acpi_pdata = acpi_device_get_match_data(dev);
-		if (!qcom->acpi_pdata) {
-			dev_err(&pdev->dev, "no supporting ACPI device data\n");
-			return -EINVAL;
-		}
-	}
-
 	qcom->resets = devm_reset_control_array_get_optional_exclusive(dev);
 	if (IS_ERR(qcom->resets)) {
 		return dev_err_probe(&pdev->dev, PTR_ERR(qcom->resets),
@@ -861,40 +687,16 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
-	if (np) {
-		parent_res = res;
-	} else {
-		memcpy(&local_res, res, sizeof(struct resource));
-		parent_res = &local_res;
-
-		parent_res->start = res->start +
-			qcom->acpi_pdata->qscratch_base_offset;
-		parent_res->end = parent_res->start +
-			qcom->acpi_pdata->qscratch_base_size;
-
-		if (qcom->acpi_pdata->is_urs) {
-			qcom->urs_usb = dwc3_qcom_create_urs_usb_platdev(dev);
-			if (IS_ERR_OR_NULL(qcom->urs_usb)) {
-				dev_err(dev, "failed to create URS USB platdev\n");
-				if (!qcom->urs_usb)
-					ret = -ENODEV;
-				else
-					ret = PTR_ERR(qcom->urs_usb);
-				goto clk_disable;
-			}
-		}
-	}
-
-	qcom->qscratch_base = devm_ioremap_resource(dev, parent_res);
+	qcom->qscratch_base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(qcom->qscratch_base)) {
 		ret = PTR_ERR(qcom->qscratch_base);
-		goto free_urs;
+		goto clk_disable;
 	}
 
 	ret = dwc3_qcom_setup_irq(pdev);
 	if (ret) {
 		dev_err(dev, "failed to setup IRQs, err=%d\n", ret);
-		goto free_urs;
+		goto clk_disable;
 	}
 
 	/*
@@ -906,14 +708,10 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 	if (ignore_pipe_clk)
 		dwc3_qcom_select_utmi_clk(qcom);
 
-	if (np)
-		ret = dwc3_qcom_of_register_core(pdev);
-	else
-		ret = dwc3_qcom_acpi_register_core(pdev);
-
+	ret = dwc3_qcom_of_register_core(pdev);
 	if (ret) {
 		dev_err(dev, "failed to register DWC3 Core, err=%d\n", ret);
-		goto free_urs;
+		goto clk_disable;
 	}
 
 	ret = dwc3_qcom_interconnect_init(qcom);
@@ -945,16 +743,8 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 interconnect_exit:
 	dwc3_qcom_interconnect_exit(qcom);
 depopulate:
-	if (np) {
-		of_platform_depopulate(&pdev->dev);
-	} else {
-		device_remove_software_node(&qcom->dwc3->dev);
-		platform_device_del(qcom->dwc3);
-	}
+	of_platform_depopulate(&pdev->dev);
 	platform_device_put(qcom->dwc3);
-free_urs:
-	if (qcom->urs_usb)
-		dwc3_qcom_destroy_urs_usb_platdev(qcom->urs_usb);
 clk_disable:
 	for (i = qcom->num_clocks - 1; i >= 0; i--) {
 		clk_disable_unprepare(qcom->clks[i]);
@@ -969,21 +759,12 @@ reset_assert:
 static void dwc3_qcom_remove(struct platform_device *pdev)
 {
 	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
-	struct device_node *np = pdev->dev.of_node;
 	struct device *dev = &pdev->dev;
 	int i;
 
-	if (np) {
-		of_platform_depopulate(&pdev->dev);
-	} else {
-		device_remove_software_node(&qcom->dwc3->dev);
-		platform_device_del(qcom->dwc3);
-	}
+	of_platform_depopulate(&pdev->dev);
 	platform_device_put(qcom->dwc3);
 
-	if (qcom->urs_usb)
-		dwc3_qcom_destroy_urs_usb_platdev(qcom->urs_usb);
-
 	for (i = qcom->num_clocks - 1; i >= 0; i--) {
 		clk_disable_unprepare(qcom->clks[i]);
 		clk_put(qcom->clks[i]);
@@ -1053,38 +834,6 @@ static const struct of_device_id dwc3_qcom_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, dwc3_qcom_of_match);
 
-#ifdef CONFIG_ACPI
-static const struct dwc3_acpi_pdata sdm845_acpi_pdata = {
-	.qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
-	.qscratch_base_size = SDM845_QSCRATCH_SIZE,
-	.dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
-	.qusb2_phy_irq_index = 1,
-	.dp_hs_phy_irq_index = 4,
-	.dm_hs_phy_irq_index = 3,
-	.ss_phy_irq_index = 2
-};
-
-static const struct dwc3_acpi_pdata sdm845_acpi_urs_pdata = {
-	.qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
-	.qscratch_base_size = SDM845_QSCRATCH_SIZE,
-	.dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
-	.qusb2_phy_irq_index = 1,
-	.dp_hs_phy_irq_index = 4,
-	.dm_hs_phy_irq_index = 3,
-	.ss_phy_irq_index = 2,
-	.is_urs = true,
-};
-
-static const struct acpi_device_id dwc3_qcom_acpi_match[] = {
-	{ "QCOM2430", (unsigned long)&sdm845_acpi_pdata },
-	{ "QCOM0304", (unsigned long)&sdm845_acpi_urs_pdata },
-	{ "QCOM0497", (unsigned long)&sdm845_acpi_urs_pdata },
-	{ "QCOM04A6", (unsigned long)&sdm845_acpi_pdata },
-	{ },
-};
-MODULE_DEVICE_TABLE(acpi, dwc3_qcom_acpi_match);
-#endif
-
 static struct platform_driver dwc3_qcom_driver = {
 	.probe		= dwc3_qcom_probe,
 	.remove_new	= dwc3_qcom_remove,
@@ -1092,7 +841,6 @@ static struct platform_driver dwc3_qcom_driver = {
 		.name	= "dwc3-qcom",
 		.pm	= &dwc3_qcom_dev_pm_ops,
 		.of_match_table	= dwc3_qcom_of_match,
-		.acpi_match_table = ACPI_PTR(dwc3_qcom_acpi_match),
 	},
 };
 
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 6ae8a36f21..d96ffbe520 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -226,7 +226,8 @@ void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
 
 	/* reinitialize physical ep1 */
 	dep = dwc->eps[1];
-	dep->flags = DWC3_EP_ENABLED;
+	dep->flags &= DWC3_EP_RESOURCE_ALLOCATED;
+	dep->flags |= DWC3_EP_ENABLED;
 
 	/* stall is always issued on EP0 */
 	dep = dwc->eps[0];
@@ -646,6 +647,7 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 		return -EINVAL;
 
 	case USB_STATE_ADDRESS:
+		dwc3_gadget_start_config(dwc, 2);
 		dwc3_gadget_clear_tx_fifos(dwc);
 
 		ret = dwc3_ep0_delegate_req(dwc, ctrl);
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 579d90efc2..89fc690fdf 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -519,77 +519,56 @@ static void dwc3_free_trb_pool(struct dwc3_ep *dep)
 static int dwc3_gadget_set_xfer_resource(struct dwc3_ep *dep)
 {
 	struct dwc3_gadget_ep_cmd_params params;
+	int ret;
+
+	if (dep->flags & DWC3_EP_RESOURCE_ALLOCATED)
+		return 0;
 
 	memset(&params, 0x00, sizeof(params));
 
 	params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1);
 
-	return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETTRANSFRESOURCE,
+	ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETTRANSFRESOURCE,
 			&params);
+	if (ret)
+		return ret;
+
+	dep->flags |= DWC3_EP_RESOURCE_ALLOCATED;
+	return 0;
 }
 
 /**
- * dwc3_gadget_start_config - configure ep resources
- * @dep: endpoint that is being enabled
- *
- * Issue a %DWC3_DEPCMD_DEPSTARTCFG command to @dep. After the command's
- * completion, it will set Transfer Resource for all available endpoints.
- *
- * The assignment of transfer resources cannot perfectly follow the data book
- * due to the fact that the controller driver does not have all knowledge of the
- * configuration in advance. It is given this information piecemeal by the
- * composite gadget framework after every SET_CONFIGURATION and
- * SET_INTERFACE. Trying to follow the databook programming model in this
- * scenario can cause errors. For two reasons:
- *
- * 1) The databook says to do %DWC3_DEPCMD_DEPSTARTCFG for every
- * %USB_REQ_SET_CONFIGURATION and %USB_REQ_SET_INTERFACE (8.1.5). This is
- * incorrect in the scenario of multiple interfaces.
- *
- * 2) The databook does not mention doing more %DWC3_DEPCMD_DEPXFERCFG for new
- * endpoint on alt setting (8.1.6).
- *
- * The following simplified method is used instead:
+ * dwc3_gadget_start_config - reset endpoint resources
+ * @dwc: pointer to the DWC3 context
+ * @resource_index: DEPSTARTCFG.XferRscIdx value (must be 0 or 2)
  *
- * All hardware endpoints can be assigned a transfer resource and this setting
- * will stay persistent until either a core reset or hibernation. So whenever we
- * do a %DWC3_DEPCMD_DEPSTARTCFG(0) we can go ahead and do
- * %DWC3_DEPCMD_DEPXFERCFG for every hardware endpoint as well. We are
- * guaranteed that there are as many transfer resources as endpoints.
+ * Set resource_index=0 to reset all endpoints' resources allocation. Do this as
+ * part of the power-on/soft-reset initialization.
  *
- * This function is called for each endpoint when it is being enabled but is
- * triggered only when called for EP0-out, which always happens first, and which
- * should only happen in one of the above conditions.
+ * Set resource_index=2 to reset only non-control endpoints' resources. Do this
+ * on receiving the SET_CONFIGURATION request or hibernation resume.
  */
-static int dwc3_gadget_start_config(struct dwc3_ep *dep)
+int dwc3_gadget_start_config(struct dwc3 *dwc, unsigned int resource_index)
 {
 	struct dwc3_gadget_ep_cmd_params params;
-	struct dwc3		*dwc;
 	u32			cmd;
 	int			i;
 	int			ret;
 
-	if (dep->number)
-		return 0;
+	if (resource_index != 0 && resource_index != 2)
+		return -EINVAL;
 
 	memset(&params, 0x00, sizeof(params));
 	cmd = DWC3_DEPCMD_DEPSTARTCFG;
-	dwc = dep->dwc;
+	cmd |= DWC3_DEPCMD_PARAM(resource_index);
 
-	ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
+	ret = dwc3_send_gadget_ep_cmd(dwc->eps[0], cmd, &params);
 	if (ret)
 		return ret;
 
-	for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) {
-		struct dwc3_ep *dep = dwc->eps[i];
-
-		if (!dep)
-			continue;
-
-		ret = dwc3_gadget_set_xfer_resource(dep);
-		if (ret)
-			return ret;
-	}
+	/* Reset resource allocation flags */
+	for (i = resource_index; i < dwc->num_eps && dwc->eps[i]; i++)
+		dwc->eps[i]->flags &= ~DWC3_EP_RESOURCE_ALLOCATED;
 
 	return 0;
 }
@@ -884,16 +863,18 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action)
 		ret = dwc3_gadget_resize_tx_fifos(dep);
 		if (ret)
 			return ret;
-
-		ret = dwc3_gadget_start_config(dep);
-		if (ret)
-			return ret;
 	}
 
 	ret = dwc3_gadget_set_ep_config(dep, action);
 	if (ret)
 		return ret;
 
+	if (!(dep->flags & DWC3_EP_RESOURCE_ALLOCATED)) {
+		ret = dwc3_gadget_set_xfer_resource(dep);
+		if (ret)
+			return ret;
+	}
+
 	if (!(dep->flags & DWC3_EP_ENABLED)) {
 		struct dwc3_trb	*trb_st_hw;
 		struct dwc3_trb	*trb_link;
@@ -1047,7 +1028,7 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
 
 	dep->stream_capable = false;
 	dep->type = 0;
-	mask = DWC3_EP_TXFIFO_RESIZED;
+	mask = DWC3_EP_TXFIFO_RESIZED | DWC3_EP_RESOURCE_ALLOCATED;
 	/*
 	 * dwc3_remove_requests() can exit early if DWC3 EP delayed stop is
 	 * set.  Do not clear DEP flags, so that the end transfer command will
@@ -2911,6 +2892,12 @@ static int __dwc3_gadget_start(struct dwc3 *dwc)
 	/* Start with SuperSpeed Default */
 	dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
 
+	ret = dwc3_gadget_start_config(dwc, 0);
+	if (ret) {
+		dev_err(dwc->dev, "failed to config endpoints\n");
+		return ret;
+	}
+
 	dep = dwc->eps[0];
 	dep->flags = 0;
 	ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_INIT);
@@ -3433,7 +3420,7 @@ static int dwc3_gadget_ep_reclaim_trb_sg(struct dwc3_ep *dep,
 		struct dwc3_request *req, const struct dwc3_event_depevt *event,
 		int status)
 {
-	struct dwc3_trb *trb = &dep->trb_pool[dep->trb_dequeue];
+	struct dwc3_trb *trb;
 	struct scatterlist *sg = req->sg;
 	struct scatterlist *s;
 	unsigned int num_queued = req->num_queued_sgs;
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index 55a56cf67d..d73e735e40 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -119,6 +119,7 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
 int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol);
 void dwc3_ep0_send_delayed_status(struct dwc3 *dwc);
 void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool interrupt);
+int dwc3_gadget_start_config(struct dwc3 *dwc, unsigned int resource_index);
 
 /**
  * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index 6c143f7d24..a171b27a78 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -13,9 +13,53 @@
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
 
+#include "../host/xhci-port.h"
+#include "../host/xhci-ext-caps.h"
+#include "../host/xhci-caps.h"
 #include "../host/xhci-plat.h"
 #include "core.h"
 
+#define XHCI_HCSPARAMS1		0x4
+#define XHCI_PORTSC_BASE	0x400
+
+/**
+ * dwc3_power_off_all_roothub_ports - Power off all Root hub ports
+ * @dwc: Pointer to our controller context structure
+ */
+static void dwc3_power_off_all_roothub_ports(struct dwc3 *dwc)
+{
+	void __iomem *xhci_regs;
+	u32 op_regs_base;
+	int port_num;
+	u32 offset;
+	u32 reg;
+	int i;
+
+	/* xhci regs is not mapped yet, do it temperary here */
+	if (dwc->xhci_resources[0].start) {
+		xhci_regs = ioremap(dwc->xhci_resources[0].start, DWC3_XHCI_REGS_END);
+		if (!xhci_regs) {
+			dev_err(dwc->dev, "Failed to ioremap xhci_regs\n");
+			return;
+		}
+
+		op_regs_base = HC_LENGTH(readl(xhci_regs));
+		reg = readl(xhci_regs + XHCI_HCSPARAMS1);
+		port_num = HCS_MAX_PORTS(reg);
+
+		for (i = 1; i <= port_num; i++) {
+			offset = op_regs_base + XHCI_PORTSC_BASE + 0x10 * (i - 1);
+			reg = readl(xhci_regs + offset);
+			reg &= ~PORT_POWER;
+			writel(reg, xhci_regs + offset);
+		}
+
+		iounmap(xhci_regs);
+	} else {
+		dev_err(dwc->dev, "xhci base reg invalid\n");
+	}
+}
+
 static void dwc3_xhci_plat_start(struct usb_hcd *hcd)
 {
 	struct platform_device *pdev;
@@ -87,6 +131,12 @@ int dwc3_host_init(struct dwc3 *dwc)
 	int			ret, irq;
 	int			prop_idx = 0;
 
+	/*
+	 * Some platforms need to power off all Root hub ports immediately after DWC3 set to host
+	 * mode to avoid VBUS glitch happen when xhci get reset later.
+	 */
+	dwc3_power_off_all_roothub_ports(dwc);
+
 	irq = dwc3_host_get_irq(dwc);
 	if (irq < 0)
 		return irq;