Adding upstream version 6.8.9.upstream/6.8.9

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

5 files changed, 44 insertions, 19 deletions

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 8de1ab8517..31684cdaaa 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1330,6 +1330,18 @@ static int dwc3_core_init(struct dwc3 *dwc)
 
 	dwc3_config_threshold(dwc);
 
+	/*
+	 * Modify this for all supported Super Speed ports when
+	 * multiport support is added.
+	 */
+	if (hw_mode != DWC3_GHWPARAMS0_MODE_GADGET &&
+	    (DWC3_IP_IS(DWC31)) &&
+	    dwc->maximum_speed == USB_SPEED_SUPER) {
+		reg = dwc3_readl(dwc->regs, DWC3_LLUCTL);
+		reg |= DWC3_LLUCTL_FORCE_GEN1;
+		dwc3_writel(dwc->regs, DWC3_LLUCTL, reg);
+	}
+
 	return 0;
 
 err_power_off_phy:
@@ -2305,12 +2317,15 @@ static int dwc3_resume(struct device *dev)
 
 	pinctrl_pm_select_default_state(dev);
 
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+
 	ret = dwc3_resume_common(dwc, PMSG_RESUME);
-	if (ret)
+	if (ret) {
+		pm_runtime_set_suspended(dev);
 		return ret;
+	}
 
-	pm_runtime_disable(dev);
-	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
 
 	return 0;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 80265ef608..893b1e694e 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -172,6 +172,8 @@
 #define DWC3_OEVTEN		0xcc0C
 #define DWC3_OSTS		0xcc10
 
+#define DWC3_LLUCTL		0xd024
+
 /* Bit fields */
 
 /* Global SoC Bus Configuration INCRx Register 0 */
@@ -657,6 +659,9 @@
 #define DWC3_OSTS_VBUSVLD		BIT(1)
 #define DWC3_OSTS_CONIDSTS		BIT(0)
 
+/* Force Gen1 speed on Gen2 link */
+#define DWC3_LLUCTL_FORCE_GEN1		BIT(10)
+
 /* Structures */
 
 struct dwc3_trb;
diff --git a/drivers/usb/dwc3/dwc3-imx8mp.c b/drivers/usb/dwc3/dwc3-imx8mp.c
index a1e15f2fff..8ee4480685 100644
--- a/drivers/usb/dwc3/dwc3-imx8mp.c
+++ b/drivers/usb/dwc3/dwc3-imx8mp.c
@@ -363,8 +363,10 @@ static int __maybe_unused dwc3_imx8mp_pm_resume(struct device *dev)
 	}
 
 	ret = clk_prepare_enable(dwc3_imx->hsio_clk);
-	if (ret)
+	if (ret) {
+		clk_disable_unprepare(dwc3_imx->suspend_clk);
 		return ret;
+	}
 
 	ret = dwc3_imx8mp_resume(dwc3_imx, PMSG_RESUME);
 
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index fdf6d5d3c2..dbd6a5b2b2 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -57,7 +57,7 @@ struct dwc3_acpi_pdata {
 	u32			qscratch_base_offset;
 	u32			qscratch_base_size;
 	u32			dwc3_core_base_size;
-	int			hs_phy_irq_index;
+	int			qusb2_phy_irq_index;
 	int			dp_hs_phy_irq_index;
 	int			dm_hs_phy_irq_index;
 	int			ss_phy_irq_index;
@@ -73,7 +73,7 @@ struct dwc3_qcom {
 	int			num_clocks;
 	struct reset_control	*resets;
 
-	int			hs_phy_irq;
+	int			qusb2_phy_irq;
 	int			dp_hs_phy_irq;
 	int			dm_hs_phy_irq;
 	int			ss_phy_irq;
@@ -372,7 +372,7 @@ static void dwc3_qcom_disable_wakeup_irq(int irq)
 
 static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
 {
-	dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq);
+	dwc3_qcom_disable_wakeup_irq(qcom->qusb2_phy_irq);
 
 	if (qcom->usb2_speed == USB_SPEED_LOW) {
 		dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
@@ -389,7 +389,7 @@ static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
 
 static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
 {
-	dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq, 0);
+	dwc3_qcom_enable_wakeup_irq(qcom->qusb2_phy_irq, 0);
 
 	/*
 	 * Configure DP/DM line interrupts based on the USB2 device attached to
@@ -542,19 +542,19 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
 	int irq;
 	int ret;
 
-	irq = dwc3_qcom_get_irq(pdev, "hs_phy_irq",
-				pdata ? pdata->hs_phy_irq_index : -1);
+	irq = dwc3_qcom_get_irq(pdev, "qusb2_phy",
+				pdata ? pdata->qusb2_phy_irq_index : -1);
 	if (irq > 0) {
 		/* Keep wakeup interrupts disabled until suspend */
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 					qcom_dwc3_resume_irq,
 					IRQF_ONESHOT | IRQF_NO_AUTOEN,
-					"qcom_dwc3 HS", qcom);
+					"qcom_dwc3 QUSB2", qcom);
 		if (ret) {
-			dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret);
+			dev_err(qcom->dev, "qusb2_phy_irq failed: %d\n", ret);
 			return ret;
 		}
-		qcom->hs_phy_irq = irq;
+		qcom->qusb2_phy_irq = irq;
 	}
 
 	irq = dwc3_qcom_get_irq(pdev, "dp_hs_phy_irq",
@@ -1058,7 +1058,7 @@ static const struct dwc3_acpi_pdata sdm845_acpi_pdata = {
 	.qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
 	.qscratch_base_size = SDM845_QSCRATCH_SIZE,
 	.dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
-	.hs_phy_irq_index = 1,
+	.qusb2_phy_irq_index = 1,
 	.dp_hs_phy_irq_index = 4,
 	.dm_hs_phy_irq_index = 3,
 	.ss_phy_irq_index = 2
@@ -1068,7 +1068,7 @@ static const struct dwc3_acpi_pdata sdm845_acpi_urs_pdata = {
 	.qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
 	.qscratch_base_size = SDM845_QSCRATCH_SIZE,
 	.dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
-	.hs_phy_irq_index = 1,
+	.qusb2_phy_irq_index = 1,
 	.dp_hs_phy_irq_index = 4,
 	.dm_hs_phy_irq_index = 3,
 	.ss_phy_irq_index = 2,
diff --git a/drivers/usb/dwc3/dwc3-xilinx.c b/drivers/usb/dwc3/dwc3-xilinx.c
index 5b7e92f476..6095f4dee6 100644
--- a/drivers/usb/dwc3/dwc3-xilinx.c
+++ b/drivers/usb/dwc3/dwc3-xilinx.c
@@ -293,11 +293,15 @@ static int dwc3_xlnx_probe(struct platform_device *pdev)
 		goto err_clk_put;
 
 	pm_runtime_set_active(dev);
-	pm_runtime_enable(dev);
+	ret = devm_pm_runtime_enable(dev);
+	if (ret < 0)
+		goto err_pm_set_suspended;
+
 	pm_suspend_ignore_children(dev, false);
-	pm_runtime_get_sync(dev);
+	return pm_runtime_resume_and_get(dev);
 
-	return 0;
+err_pm_set_suspended:
+	pm_runtime_set_suspended(dev);
 
 err_clk_put:
 	clk_bulk_disable_unprepare(priv_data->num_clocks, priv_data->clks);
@@ -315,7 +319,6 @@ static void dwc3_xlnx_remove(struct platform_device *pdev)
 	clk_bulk_disable_unprepare(priv_data->num_clocks, priv_data->clks);
 	priv_data->num_clocks = 0;
 
-	pm_runtime_disable(dev);
 	pm_runtime_put_noidle(dev);
 	pm_runtime_set_suspended(dev);
 }