Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1008 insertions, 0 deletions

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
new file mode 100644
index 0000000000..d6fc08e5db
--- /dev/null
+++ b/drivers/usb/host/xhci-pci.c
@@ -0,0 +1,1008 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xHCI host controller driver PCI Bus Glue.
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ */
+
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/reset.h>
+#include <linux/suspend.h>
+
+#include "xhci.h"
+#include "xhci-trace.h"
+#include "xhci-pci.h"
+
+#define SSIC_PORT_NUM		2
+#define SSIC_PORT_CFG2		0x880c
+#define SSIC_PORT_CFG2_OFFSET	0x30
+#define PROG_DONE		(1 << 30)
+#define SSIC_PORT_UNUSED	(1 << 31)
+#define SPARSE_DISABLE_BIT	17
+#define SPARSE_CNTL_ENABLE	0xC12C
+
+/* Device for a quirk */
+#define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
+#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK	0x1000
+#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009	0x1009
+#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1100	0x1100
+#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400	0x1400
+
+#define PCI_VENDOR_ID_ETRON		0x1b6f
+#define PCI_DEVICE_ID_EJ168		0x7023
+
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI	0x8c31
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI	0x9c31
+#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI	0x9cb1
+#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI		0x22b5
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI		0xa12f
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI	0x9d2f
+#define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI		0x0aa8
+#define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI		0x1aa8
+#define PCI_DEVICE_ID_INTEL_APL_XHCI			0x5aa8
+#define PCI_DEVICE_ID_INTEL_DNV_XHCI			0x19d0
+#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI	0x15b5
+#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI	0x15b6
+#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI	0x15c1
+#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI	0x15db
+#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI	0x15d4
+#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI		0x15e9
+#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI		0x15ec
+#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI		0x15f0
+#define PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI		0x8a13
+#define PCI_DEVICE_ID_INTEL_CML_XHCI			0xa3af
+#define PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI		0x9a13
+#define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI		0x1138
+#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI		0x51ed
+#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI	0x54ed
+
+#define PCI_DEVICE_ID_AMD_RENOIR_XHCI			0x1639
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_4			0x43b9
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_3			0x43ba
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_2			0x43bb
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_1			0x43bc
+
+#define PCI_DEVICE_ID_ASMEDIA_1042_XHCI			0x1042
+#define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI		0x1142
+#define PCI_DEVICE_ID_ASMEDIA_1142_XHCI			0x1242
+#define PCI_DEVICE_ID_ASMEDIA_2142_XHCI			0x2142
+#define PCI_DEVICE_ID_ASMEDIA_3242_XHCI			0x3242
+
+static const char hcd_name[] = "xhci_hcd";
+
+static struct hc_driver __read_mostly xhci_pci_hc_driver;
+
+static int xhci_pci_setup(struct usb_hcd *hcd);
+static int xhci_pci_run(struct usb_hcd *hcd);
+static int xhci_pci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
+				      struct usb_tt *tt, gfp_t mem_flags);
+
+static const struct xhci_driver_overrides xhci_pci_overrides __initconst = {
+	.reset = xhci_pci_setup,
+	.start = xhci_pci_run,
+	.update_hub_device = xhci_pci_update_hub_device,
+};
+
+static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
+{
+	struct usb_hcd *hcd = xhci_to_hcd(xhci);
+
+	if (hcd->msix_enabled) {
+		struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+		int i;
+
+		for (i = 0; i < xhci->msix_count; i++)
+			synchronize_irq(pci_irq_vector(pdev, i));
+	}
+}
+
+/* Free any IRQs and disable MSI-X */
+static void xhci_cleanup_msix(struct xhci_hcd *xhci)
+{
+	struct usb_hcd *hcd = xhci_to_hcd(xhci);
+	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+
+	/* return if using legacy interrupt */
+	if (hcd->irq > 0)
+		return;
+
+	if (hcd->msix_enabled) {
+		int i;
+
+		for (i = 0; i < xhci->msix_count; i++)
+			free_irq(pci_irq_vector(pdev, i), xhci_to_hcd(xhci));
+	} else {
+		free_irq(pci_irq_vector(pdev, 0), xhci_to_hcd(xhci));
+	}
+
+	pci_free_irq_vectors(pdev);
+	hcd->msix_enabled = 0;
+}
+
+/*
+ * Set up MSI
+ */
+static int xhci_setup_msi(struct xhci_hcd *xhci)
+{
+	int ret;
+	/*
+	 * TODO:Check with MSI Soc for sysdev
+	 */
+	struct pci_dev  *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+
+	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
+	if (ret < 0) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+				"failed to allocate MSI entry");
+		return ret;
+	}
+
+	ret = request_irq(pdev->irq, xhci_msi_irq,
+				0, "xhci_hcd", xhci_to_hcd(xhci));
+	if (ret) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+				"disable MSI interrupt");
+		pci_free_irq_vectors(pdev);
+	}
+
+	return ret;
+}
+
+/*
+ * Set up MSI-X
+ */
+static int xhci_setup_msix(struct xhci_hcd *xhci)
+{
+	int i, ret;
+	struct usb_hcd *hcd = xhci_to_hcd(xhci);
+	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+
+	/*
+	 * calculate number of msi-x vectors supported.
+	 * - HCS_MAX_INTRS: the max number of interrupts the host can handle,
+	 *   with max number of interrupters based on the xhci HCSPARAMS1.
+	 * - num_online_cpus: maximum msi-x vectors per CPUs core.
+	 *   Add additional 1 vector to ensure always available interrupt.
+	 */
+	xhci->msix_count = min(num_online_cpus() + 1,
+				HCS_MAX_INTRS(xhci->hcs_params1));
+
+	ret = pci_alloc_irq_vectors(pdev, xhci->msix_count, xhci->msix_count,
+			PCI_IRQ_MSIX);
+	if (ret < 0) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+				"Failed to enable MSI-X");
+		return ret;
+	}
+
+	for (i = 0; i < xhci->msix_count; i++) {
+		ret = request_irq(pci_irq_vector(pdev, i), xhci_msi_irq, 0,
+				"xhci_hcd", xhci_to_hcd(xhci));
+		if (ret)
+			goto disable_msix;
+	}
+
+	hcd->msix_enabled = 1;
+	return ret;
+
+disable_msix:
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "disable MSI-X interrupt");
+	while (--i >= 0)
+		free_irq(pci_irq_vector(pdev, i), xhci_to_hcd(xhci));
+	pci_free_irq_vectors(pdev);
+	return ret;
+}
+
+static int xhci_try_enable_msi(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct pci_dev  *pdev;
+	int ret;
+
+	pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+	/*
+	 * Some Fresco Logic host controllers advertise MSI, but fail to
+	 * generate interrupts.  Don't even try to enable MSI.
+	 */
+	if (xhci->quirks & XHCI_BROKEN_MSI)
+		goto legacy_irq;
+
+	/* unregister the legacy interrupt */
+	if (hcd->irq)
+		free_irq(hcd->irq, hcd);
+	hcd->irq = 0;
+
+	ret = xhci_setup_msix(xhci);
+	if (ret)
+		/* fall back to msi*/
+		ret = xhci_setup_msi(xhci);
+
+	if (!ret) {
+		hcd->msi_enabled = 1;
+		return 0;
+	}
+
+	if (!pdev->irq) {
+		xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n");
+		return -EINVAL;
+	}
+
+ legacy_irq:
+	if (!strlen(hcd->irq_descr))
+		snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
+			 hcd->driver->description, hcd->self.busnum);
+
+	/* fall back to legacy interrupt*/
+	ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
+			hcd->irq_descr, hcd);
+	if (ret) {
+		xhci_err(xhci, "request interrupt %d failed\n",
+				pdev->irq);
+		return ret;
+	}
+	hcd->irq = pdev->irq;
+	return 0;
+}
+
+static int xhci_pci_run(struct usb_hcd *hcd)
+{
+	int ret;
+
+	if (usb_hcd_is_primary_hcd(hcd)) {
+		ret = xhci_try_enable_msi(hcd);
+		if (ret)
+			return ret;
+	}
+
+	return xhci_run(hcd);
+}
+
+static void xhci_pci_stop(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+	xhci_stop(hcd);
+
+	if (usb_hcd_is_primary_hcd(hcd))
+		xhci_cleanup_msix(xhci);
+}
+
+/* called after powerup, by probe or system-pm "wakeup" */
+static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
+{
+	/*
+	 * TODO: Implement finding debug ports later.
+	 * TODO: see if there are any quirks that need to be added to handle
+	 * new extended capabilities.
+	 */
+
+	/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
+	if (!pci_set_mwi(pdev))
+		xhci_dbg(xhci, "MWI active\n");
+
+	xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
+	return 0;
+}
+
+static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
+{
+	struct pci_dev                  *pdev = to_pci_dev(dev);
+	struct xhci_driver_data         *driver_data;
+	const struct pci_device_id      *id;
+
+	id = pci_match_id(to_pci_driver(pdev->dev.driver)->id_table, pdev);
+
+	if (id && id->driver_data) {
+		driver_data = (struct xhci_driver_data *)id->driver_data;
+		xhci->quirks |= driver_data->quirks;
+	}
+
+	/* Look for vendor-specific quirks */
+	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
+			(pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK ||
+			 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) {
+		if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
+				pdev->revision == 0x0) {
+			xhci->quirks |= XHCI_RESET_EP_QUIRK;
+			xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"XHCI_RESET_EP_QUIRK for this evaluation HW is deprecated");
+		}
+		if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
+				pdev->revision == 0x4) {
+			xhci->quirks |= XHCI_SLOW_SUSPEND;
+			xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"QUIRK: Fresco Logic xHC revision %u"
+				"must be suspended extra slowly",
+				pdev->revision);
+		}
+		if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK)
+			xhci->quirks |= XHCI_BROKEN_STREAMS;
+		/* Fresco Logic confirms: all revisions of this chip do not
+		 * support MSI, even though some of them claim to in their PCI
+		 * capabilities.
+		 */
+		xhci->quirks |= XHCI_BROKEN_MSI;
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"QUIRK: Fresco Logic revision %u "
+				"has broken MSI implementation",
+				pdev->revision);
+		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+	}
+
+	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
+			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1009)
+		xhci->quirks |= XHCI_BROKEN_STREAMS;
+
+	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
+			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1100)
+		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+
+	if (pdev->vendor == PCI_VENDOR_ID_NEC)
+		xhci->quirks |= XHCI_NEC_HOST;
+
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96)
+		xhci->quirks |= XHCI_AMD_0x96_HOST;
+
+	/* AMD PLL quirk */
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_quirk_pll_check())
+		xhci->quirks |= XHCI_AMD_PLL_FIX;
+
+	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
+		(pdev->device == 0x145c ||
+		 pdev->device == 0x15e0 ||
+		 pdev->device == 0x15e1 ||
+		 pdev->device == 0x43bb))
+		xhci->quirks |= XHCI_SUSPEND_DELAY;
+
+	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
+	    (pdev->device == 0x15e0 || pdev->device == 0x15e1))
+		xhci->quirks |= XHCI_SNPS_BROKEN_SUSPEND;
+
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x15e5) {
+		xhci->quirks |= XHCI_DISABLE_SPARSE;
+		xhci->quirks |= XHCI_RESET_ON_RESUME;
+	}
+
+	if (pdev->vendor == PCI_VENDOR_ID_AMD)
+		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+
+	if ((pdev->vendor == PCI_VENDOR_ID_AMD) &&
+		((pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4) ||
+		(pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_3) ||
+		(pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2) ||
+		(pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_1)))
+		xhci->quirks |= XHCI_U2_DISABLE_WAKE;
+
+	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
+		pdev->device == PCI_DEVICE_ID_AMD_RENOIR_XHCI)
+		xhci->quirks |= XHCI_BROKEN_D3COLD_S2I;
+
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
+		xhci->quirks |= XHCI_LPM_SUPPORT;
+		xhci->quirks |= XHCI_INTEL_HOST;
+		xhci->quirks |= XHCI_AVOID_BEI;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+			pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
+		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
+		xhci->limit_active_eps = 64;
+		xhci->quirks |= XHCI_SW_BW_CHECKING;
+		/*
+		 * PPT desktop boards DH77EB and DH77DF will power back on after
+		 * a few seconds of being shutdown.  The fix for this is to
+		 * switch the ports from xHCI to EHCI on shutdown.  We can't use
+		 * DMI information to find those particular boards (since each
+		 * vendor will change the board name), so we have to key off all
+		 * PPT chipsets.
+		 */
+		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		(pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI)) {
+		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
+		xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		(pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_CML_XHCI)) {
+		xhci->quirks |= XHCI_PME_STUCK_QUIRK;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+	    pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)
+		xhci->quirks |= XHCI_SSIC_PORT_UNUSED;
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+	    (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI))
+		xhci->quirks |= XHCI_INTEL_USB_ROLE_SW;
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+	    (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI))
+		xhci->quirks |= XHCI_MISSING_CAS;
+
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+	    (pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI))
+		xhci->quirks |= XHCI_RESET_TO_DEFAULT;
+
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+	    (pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI))
+		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
+
+	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
+			pdev->device == PCI_DEVICE_ID_EJ168) {
+		xhci->quirks |= XHCI_RESET_ON_RESUME;
+		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+		xhci->quirks |= XHCI_BROKEN_STREAMS;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
+	    pdev->device == 0x0014) {
+		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+		xhci->quirks |= XHCI_ZERO_64B_REGS;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
+	    pdev->device == 0x0015) {
+		xhci->quirks |= XHCI_RESET_ON_RESUME;
+		xhci->quirks |= XHCI_ZERO_64B_REGS;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_VIA)
+		xhci->quirks |= XHCI_RESET_ON_RESUME;
+
+	/* See https://bugzilla.kernel.org/show_bug.cgi?id=79511 */
+	if (pdev->vendor == PCI_VENDOR_ID_VIA &&
+			pdev->device == 0x3432)
+		xhci->quirks |= XHCI_BROKEN_STREAMS;
+
+	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483)
+		xhci->quirks |= XHCI_LPM_SUPPORT;
+
+	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
+		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) {
+		/*
+		 * try to tame the ASMedia 1042 controller which reports 0.96
+		 * but appears to behave more like 1.0
+		 */
+		xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
+		xhci->quirks |= XHCI_BROKEN_STREAMS;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
+		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) {
+		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+		xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
+	    (pdev->device == PCI_DEVICE_ID_ASMEDIA_1142_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_ASMEDIA_2142_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_ASMEDIA_3242_XHCI))
+		xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
+
+	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
+		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI)
+		xhci->quirks |= XHCI_ASMEDIA_MODIFY_FLOWCONTROL;
+
+	if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241)
+		xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7;
+
+	if ((pdev->vendor == PCI_VENDOR_ID_BROADCOM ||
+	     pdev->vendor == PCI_VENDOR_ID_CAVIUM) &&
+	     pdev->device == 0x9026)
+		xhci->quirks |= XHCI_RESET_PLL_ON_DISCONNECT;
+
+	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
+	    (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2 ||
+	     pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4))
+		xhci->quirks |= XHCI_NO_SOFT_RETRY;
+
+	if (pdev->vendor == PCI_VENDOR_ID_ZHAOXIN) {
+		xhci->quirks |= XHCI_ZHAOXIN_HOST;
+		xhci->quirks |= XHCI_LPM_SUPPORT;
+
+		if (pdev->device == 0x9202) {
+			xhci->quirks |= XHCI_RESET_ON_RESUME;
+			xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH;
+		}
+
+		if (pdev->device == 0x9203)
+			xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH;
+	}
+
+	/* xHC spec requires PCI devices to support D3hot and D3cold */
+	if (xhci->hci_version >= 0x120)
+		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
+
+	if (xhci->quirks & XHCI_RESET_ON_RESUME)
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"QUIRK: Resetting on resume");
+}
+
+#ifdef CONFIG_ACPI
+static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev)
+{
+	static const guid_t intel_dsm_guid =
+		GUID_INIT(0xac340cb7, 0xe901, 0x45bf,
+			  0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23);
+	union acpi_object *obj;
+
+	obj = acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), &intel_dsm_guid, 3, 1,
+				NULL);
+	ACPI_FREE(obj);
+}
+
+static void xhci_find_lpm_incapable_ports(struct usb_hcd *hcd, struct usb_device *hdev)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct xhci_hub *rhub = &xhci->usb3_rhub;
+	int ret;
+	int i;
+
+	/* This is not the usb3 roothub we are looking for */
+	if (hcd != rhub->hcd)
+		return;
+
+	if (hdev->maxchild > rhub->num_ports) {
+		dev_err(&hdev->dev, "USB3 roothub port number mismatch\n");
+		return;
+	}
+
+	for (i = 0; i < hdev->maxchild; i++) {
+		ret = usb_acpi_port_lpm_incapable(hdev, i);
+
+		dev_dbg(&hdev->dev, "port-%d disable U1/U2 _DSM: %d\n", i + 1, ret);
+
+		if (ret >= 0) {
+			rhub->ports[i]->lpm_incapable = ret;
+			continue;
+		}
+	}
+}
+
+#else
+static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
+static void xhci_find_lpm_incapable_ports(struct usb_hcd *hcd, struct usb_device *hdev) { }
+#endif /* CONFIG_ACPI */
+
+/* called during probe() after chip reset completes */
+static int xhci_pci_setup(struct usb_hcd *hcd)
+{
+	struct xhci_hcd		*xhci;
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+	int			retval;
+
+	xhci = hcd_to_xhci(hcd);
+	if (!xhci->sbrn)
+		pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
+
+	/* imod_interval is the interrupt moderation value in nanoseconds. */
+	xhci->imod_interval = 40000;
+
+	retval = xhci_gen_setup(hcd, xhci_pci_quirks);
+	if (retval)
+		return retval;
+
+	if (!usb_hcd_is_primary_hcd(hcd))
+		return 0;
+
+	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+		xhci_pme_acpi_rtd3_enable(pdev);
+
+	xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);
+
+	/* Find any debug ports */
+	return xhci_pci_reinit(xhci, pdev);
+}
+
+static int xhci_pci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
+				      struct usb_tt *tt, gfp_t mem_flags)
+{
+	/* Check if acpi claims some USB3 roothub ports are lpm incapable */
+	if (!hdev->parent)
+		xhci_find_lpm_incapable_ports(hcd, hdev);
+
+	return xhci_update_hub_device(hcd, hdev, tt, mem_flags);
+}
+
+/*
+ * We need to register our own PCI probe function (instead of the USB core's
+ * function) in order to create a second roothub under xHCI.
+ */
+static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	int retval;
+	struct xhci_hcd *xhci;
+	struct usb_hcd *hcd;
+	struct xhci_driver_data *driver_data;
+	struct reset_control *reset;
+
+	driver_data = (struct xhci_driver_data *)id->driver_data;
+	if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) {
+		retval = renesas_xhci_check_request_fw(dev, id);
+		if (retval)
+			return retval;
+	}
+
+	reset = devm_reset_control_get_optional_exclusive(&dev->dev, NULL);
+	if (IS_ERR(reset))
+		return PTR_ERR(reset);
+	reset_control_reset(reset);
+
+	/* Prevent runtime suspending between USB-2 and USB-3 initialization */
+	pm_runtime_get_noresume(&dev->dev);
+
+	/* Register the USB 2.0 roothub.
+	 * FIXME: USB core must know to register the USB 2.0 roothub first.
+	 * This is sort of silly, because we could just set the HCD driver flags
+	 * to say USB 2.0, but I'm not sure what the implications would be in
+	 * the other parts of the HCD code.
+	 */
+	retval = usb_hcd_pci_probe(dev, &xhci_pci_hc_driver);
+
+	if (retval)
+		goto put_runtime_pm;
+
+	/* USB 2.0 roothub is stored in the PCI device now. */
+	hcd = dev_get_drvdata(&dev->dev);
+	xhci = hcd_to_xhci(hcd);
+	xhci->reset = reset;
+	xhci->shared_hcd = usb_create_shared_hcd(&xhci_pci_hc_driver, &dev->dev,
+						 pci_name(dev), hcd);
+	if (!xhci->shared_hcd) {
+		retval = -ENOMEM;
+		goto dealloc_usb2_hcd;
+	}
+
+	retval = xhci_ext_cap_init(xhci);
+	if (retval)
+		goto put_usb3_hcd;
+
+	retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
+			IRQF_SHARED);
+	if (retval)
+		goto put_usb3_hcd;
+	/* Roothub already marked as USB 3.0 speed */
+
+	if (!(xhci->quirks & XHCI_BROKEN_STREAMS) &&
+			HCC_MAX_PSA(xhci->hcc_params) >= 4)
+		xhci->shared_hcd->can_do_streams = 1;
+
+	/* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */
+	pm_runtime_put_noidle(&dev->dev);
+
+	if (pci_choose_state(dev, PMSG_SUSPEND) == PCI_D0)
+		pm_runtime_forbid(&dev->dev);
+	else if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
+		pm_runtime_allow(&dev->dev);
+
+	dma_set_max_seg_size(&dev->dev, UINT_MAX);
+
+	return 0;
+
+put_usb3_hcd:
+	usb_put_hcd(xhci->shared_hcd);
+dealloc_usb2_hcd:
+	usb_hcd_pci_remove(dev);
+put_runtime_pm:
+	pm_runtime_put_noidle(&dev->dev);
+	return retval;
+}
+
+static void xhci_pci_remove(struct pci_dev *dev)
+{
+	struct xhci_hcd *xhci;
+
+	xhci = hcd_to_xhci(pci_get_drvdata(dev));
+
+	xhci->xhc_state |= XHCI_STATE_REMOVING;
+
+	if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
+		pm_runtime_forbid(&dev->dev);
+
+	if (xhci->shared_hcd) {
+		usb_remove_hcd(xhci->shared_hcd);
+		usb_put_hcd(xhci->shared_hcd);
+		xhci->shared_hcd = NULL;
+	}
+
+	/* Workaround for spurious wakeups at shutdown with HSW */
+	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
+		pci_set_power_state(dev, PCI_D3hot);
+
+	usb_hcd_pci_remove(dev);
+}
+
+/*
+ * In some Intel xHCI controllers, in order to get D3 working,
+ * through a vendor specific SSIC CONFIG register at offset 0x883c,
+ * SSIC PORT need to be marked as "unused" before putting xHCI
+ * into D3. After D3 exit, the SSIC port need to be marked as "used".
+ * Without this change, xHCI might not enter D3 state.
+ */
+static void xhci_ssic_port_unused_quirk(struct usb_hcd *hcd, bool suspend)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	u32 val;
+	void __iomem *reg;
+	int i;
+
+	for (i = 0; i < SSIC_PORT_NUM; i++) {
+		reg = (void __iomem *) xhci->cap_regs +
+				SSIC_PORT_CFG2 +
+				i * SSIC_PORT_CFG2_OFFSET;
+
+		/* Notify SSIC that SSIC profile programming is not done. */
+		val = readl(reg) & ~PROG_DONE;
+		writel(val, reg);
+
+		/* Mark SSIC port as unused(suspend) or used(resume) */
+		val = readl(reg);
+		if (suspend)
+			val |= SSIC_PORT_UNUSED;
+		else
+			val &= ~SSIC_PORT_UNUSED;
+		writel(val, reg);
+
+		/* Notify SSIC that SSIC profile programming is done */
+		val = readl(reg) | PROG_DONE;
+		writel(val, reg);
+		readl(reg);
+	}
+}
+
+/*
+ * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
+ * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
+ */
+static void xhci_pme_quirk(struct usb_hcd *hcd)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	void __iomem *reg;
+	u32 val;
+
+	reg = (void __iomem *) xhci->cap_regs + 0x80a4;
+	val = readl(reg);
+	writel(val | BIT(28), reg);
+	readl(reg);
+}
+
+static void xhci_sparse_control_quirk(struct usb_hcd *hcd)
+{
+	u32 reg;
+
+	reg = readl(hcd->regs + SPARSE_CNTL_ENABLE);
+	reg &= ~BIT(SPARSE_DISABLE_BIT);
+	writel(reg, hcd->regs + SPARSE_CNTL_ENABLE);
+}
+
+static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+	int			ret;
+
+	/*
+	 * Systems with the TI redriver that loses port status change events
+	 * need to have the registers polled during D3, so avoid D3cold.
+	 */
+	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+		pci_d3cold_disable(pdev);
+
+#ifdef CONFIG_SUSPEND
+	/* d3cold is broken, but only when s2idle is used */
+	if (pm_suspend_target_state == PM_SUSPEND_TO_IDLE &&
+	    xhci->quirks & (XHCI_BROKEN_D3COLD_S2I))
+		pci_d3cold_disable(pdev);
+#endif
+
+	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+		xhci_pme_quirk(hcd);
+
+	if (xhci->quirks & XHCI_SSIC_PORT_UNUSED)
+		xhci_ssic_port_unused_quirk(hcd, true);
+
+	if (xhci->quirks & XHCI_DISABLE_SPARSE)
+		xhci_sparse_control_quirk(hcd);
+
+	ret = xhci_suspend(xhci, do_wakeup);
+
+	/* synchronize irq when using MSI-X */
+	xhci_msix_sync_irqs(xhci);
+
+	if (ret && (xhci->quirks & XHCI_SSIC_PORT_UNUSED))
+		xhci_ssic_port_unused_quirk(hcd, false);
+
+	return ret;
+}
+
+static int xhci_pci_resume(struct usb_hcd *hcd, pm_message_t msg)
+{
+	struct xhci_hcd		*xhci = hcd_to_xhci(hcd);
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+	int			retval = 0;
+
+	reset_control_reset(xhci->reset);
+
+	/* The BIOS on systems with the Intel Panther Point chipset may or may
+	 * not support xHCI natively.  That means that during system resume, it
+	 * may switch the ports back to EHCI so that users can use their
+	 * keyboard to select a kernel from GRUB after resume from hibernate.
+	 *
+	 * The BIOS is supposed to remember whether the OS had xHCI ports
+	 * enabled before resume, and switch the ports back to xHCI when the
+	 * BIOS/OS semaphore is written, but we all know we can't trust BIOS
+	 * writers.
+	 *
+	 * Unconditionally switch the ports back to xHCI after a system resume.
+	 * It should not matter whether the EHCI or xHCI controller is
+	 * resumed first. It's enough to do the switchover in xHCI because
+	 * USB core won't notice anything as the hub driver doesn't start
+	 * running again until after all the devices (including both EHCI and
+	 * xHCI host controllers) have been resumed.
+	 */
+
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+		usb_enable_intel_xhci_ports(pdev);
+
+	if (xhci->quirks & XHCI_SSIC_PORT_UNUSED)
+		xhci_ssic_port_unused_quirk(hcd, false);
+
+	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+		xhci_pme_quirk(hcd);
+
+	retval = xhci_resume(xhci, msg);
+	return retval;
+}
+
+static int xhci_pci_poweroff_late(struct usb_hcd *hcd, bool do_wakeup)
+{
+	struct xhci_hcd		*xhci = hcd_to_xhci(hcd);
+	struct xhci_port	*port;
+	struct usb_device	*udev;
+	unsigned int		slot_id;
+	u32			portsc;
+	int			i;
+
+	/*
+	 * Systems with XHCI_RESET_TO_DEFAULT quirk have boot firmware that
+	 * cause significant boot delay if usb ports are in suspended U3 state
+	 * during boot. Some USB devices survive in U3 state over S4 hibernate
+	 *
+	 * Disable ports that are in U3 if remote wake is not enabled for either
+	 * host controller or connected device
+	 */
+
+	if (!(xhci->quirks & XHCI_RESET_TO_DEFAULT))
+		return 0;
+
+	for (i = 0; i < HCS_MAX_PORTS(xhci->hcs_params1); i++) {
+		port = &xhci->hw_ports[i];
+		portsc = readl(port->addr);
+
+		if ((portsc & PORT_PLS_MASK) != XDEV_U3)
+			continue;
+
+		slot_id = xhci_find_slot_id_by_port(port->rhub->hcd, xhci,
+						    port->hcd_portnum + 1);
+		if (!slot_id || !xhci->devs[slot_id]) {
+			xhci_err(xhci, "No dev for slot_id %d for port %d-%d in U3\n",
+				 slot_id, port->rhub->hcd->self.busnum, port->hcd_portnum + 1);
+			continue;
+		}
+
+		udev = xhci->devs[slot_id]->udev;
+
+		/* if wakeup is enabled then don't disable the port */
+		if (udev->do_remote_wakeup && do_wakeup)
+			continue;
+
+		xhci_dbg(xhci, "port %d-%d in U3 without wakeup, disable it\n",
+			 port->rhub->hcd->self.busnum, port->hcd_portnum + 1);
+		portsc = xhci_port_state_to_neutral(portsc);
+		writel(portsc | PORT_PE, port->addr);
+	}
+
+	return 0;
+}
+
+static void xhci_pci_shutdown(struct usb_hcd *hcd)
+{
+	struct xhci_hcd		*xhci = hcd_to_xhci(hcd);
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+
+	xhci_shutdown(hcd);
+	xhci_cleanup_msix(xhci);
+
+	/* Yet another workaround for spurious wakeups at shutdown with HSW */
+	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
+		pci_set_power_state(pdev, PCI_D3hot);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static const struct xhci_driver_data reneses_data = {
+	.quirks  = XHCI_RENESAS_FW_QUIRK,
+	.firmware = "renesas_usb_fw.mem",
+};
+
+/* PCI driver selection metadata; PCI hotplugging uses this */
+static const struct pci_device_id pci_ids[] = {
+	{ PCI_DEVICE(0x1912, 0x0014),
+		.driver_data =  (unsigned long)&reneses_data,
+	},
+	{ PCI_DEVICE(0x1912, 0x0015),
+		.driver_data =  (unsigned long)&reneses_data,
+	},
+	/* handle any USB 3.0 xHCI controller */
+	{ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
+	},
+	{ /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+/*
+ * Without CONFIG_USB_XHCI_PCI_RENESAS renesas_xhci_check_request_fw() won't
+ * load firmware, so don't encumber the xhci-pci driver with it.
+ */
+#if IS_ENABLED(CONFIG_USB_XHCI_PCI_RENESAS)
+MODULE_FIRMWARE("renesas_usb_fw.mem");
+#endif
+
+/* pci driver glue; this is a "new style" PCI driver module */
+static struct pci_driver xhci_pci_driver = {
+	.name =		hcd_name,
+	.id_table =	pci_ids,
+
+	.probe =	xhci_pci_probe,
+	.remove =	xhci_pci_remove,
+	/* suspend and resume implemented later */
+
+	.shutdown = 	usb_hcd_pci_shutdown,
+	.driver = {
+		.pm = pm_ptr(&usb_hcd_pci_pm_ops),
+	},
+};
+
+static int __init xhci_pci_init(void)
+{
+	xhci_init_driver(&xhci_pci_hc_driver, &xhci_pci_overrides);
+	xhci_pci_hc_driver.pci_suspend = pm_ptr(xhci_pci_suspend);
+	xhci_pci_hc_driver.pci_resume = pm_ptr(xhci_pci_resume);
+	xhci_pci_hc_driver.pci_poweroff_late = pm_ptr(xhci_pci_poweroff_late);
+	xhci_pci_hc_driver.shutdown = pm_ptr(xhci_pci_shutdown);
+	xhci_pci_hc_driver.stop = xhci_pci_stop;
+	return pci_register_driver(&xhci_pci_driver);
+}
+module_init(xhci_pci_init);
+
+static void __exit xhci_pci_exit(void)
+{
+	pci_unregister_driver(&xhci_pci_driver);
+}
+module_exit(xhci_pci_exit);
+
+MODULE_DESCRIPTION("xHCI PCI Host Controller Driver");
+MODULE_LICENSE("GPL");