summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/xhci.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-06-19 21:00:37 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-06-19 21:00:37 +0000
commit94ac2ab3fff96814d7460a27a0e9d004abbd4128 (patch)
tree9a4eb8cc234b540b0f4b93363109cdd37a20540b /drivers/usb/host/xhci.c
parentAdding debian version 6.8.12-1. (diff)
downloadlinux-94ac2ab3fff96814d7460a27a0e9d004abbd4128.tar.xz
linux-94ac2ab3fff96814d7460a27a0e9d004abbd4128.zip
Merging upstream version 6.9.2.
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/usb/host/xhci.c')
-rw-r--r--drivers/usb/host/xhci.c51
1 files changed, 24 insertions, 27 deletions
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index afccd58c9a..8579603eda 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -346,6 +346,23 @@ static int xhci_disable_interrupter(struct xhci_interrupter *ir)
return 0;
}
+/* interrupt moderation interval imod_interval in nanoseconds */
+static int xhci_set_interrupter_moderation(struct xhci_interrupter *ir,
+ u32 imod_interval)
+{
+ u32 imod;
+
+ if (!ir || !ir->ir_set || imod_interval > U16_MAX * 250)
+ return -EINVAL;
+
+ imod = readl(&ir->ir_set->irq_control);
+ imod &= ~ER_IRQ_INTERVAL_MASK;
+ imod |= (imod_interval / 250) & ER_IRQ_INTERVAL_MASK;
+ writel(imod, &ir->ir_set->irq_control);
+
+ return 0;
+}
+
static void compliance_mode_recovery(struct timer_list *t)
{
struct xhci_hcd *xhci;
@@ -528,7 +545,6 @@ static int xhci_run_finished(struct xhci_hcd *xhci)
*/
int xhci_run(struct usb_hcd *hcd)
{
- u32 temp;
u64 temp_64;
int ret;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
@@ -551,12 +567,7 @@ int xhci_run(struct usb_hcd *hcd)
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"ERST deq = 64'h%0lx", (long unsigned int) temp_64);
- xhci_dbg_trace(xhci, trace_xhci_dbg_init,
- "// Set the interrupt modulation register");
- temp = readl(&ir->ir_set->irq_control);
- temp &= ~ER_IRQ_INTERVAL_MASK;
- temp |= (xhci->imod_interval / 250) & ER_IRQ_INTERVAL_MASK;
- writel(temp, &ir->ir_set->irq_control);
+ xhci_set_interrupter_moderation(ir, xhci->imod_interval);
if (xhci->quirks & XHCI_NEC_HOST) {
struct xhci_command *command;
@@ -783,19 +794,7 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci)
seg = seg->next;
} while (seg != ring->deq_seg);
- /* Reset the software enqueue and dequeue pointers */
- ring->deq_seg = ring->first_seg;
- ring->dequeue = ring->first_seg->trbs;
- ring->enq_seg = ring->deq_seg;
- ring->enqueue = ring->dequeue;
-
- ring->num_trbs_free = ring->num_segs * (TRBS_PER_SEGMENT - 1) - 1;
- /*
- * Ring is now zeroed, so the HW should look for change of ownership
- * when the cycle bit is set to 1.
- */
- ring->cycle_state = 1;
-
+ xhci_initialize_ring_info(ring, 1);
/*
* Reset the hardware dequeue pointer.
* Yes, this will need to be re-written after resume, but we're paranoid
@@ -2264,7 +2263,7 @@ static int xhci_check_tt_bw_table(struct xhci_hcd *xhci,
struct xhci_tt_bw_info *tt_info;
/* Find the bandwidth table for the root port this TT is attached to. */
- bw_table = &xhci->rh_bw[virt_dev->real_port - 1].bw_table;
+ bw_table = &xhci->rh_bw[virt_dev->rhub_port->hw_portnum].bw_table;
tt_info = virt_dev->tt_info;
/* If this TT already had active endpoints, the bandwidth for this TT
* has already been added. Removing all periodic endpoints (and thus
@@ -2382,7 +2381,7 @@ static int xhci_check_bw_table(struct xhci_hcd *xhci,
if (virt_dev->tt_info) {
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"Recalculating BW for rootport %u",
- virt_dev->real_port);
+ virt_dev->rhub_port->hw_portnum + 1);
if (xhci_check_tt_bw_table(xhci, virt_dev, old_active_eps)) {
xhci_warn(xhci, "Not enough bandwidth on HS bus for "
"newly activated TT.\n");
@@ -2395,7 +2394,7 @@ static int xhci_check_bw_table(struct xhci_hcd *xhci,
} else {
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"Recalculating BW for rootport %u",
- virt_dev->real_port);
+ virt_dev->rhub_port->hw_portnum + 1);
}
/* Add in how much bandwidth will be used for interval zero, or the
@@ -2492,14 +2491,12 @@ static int xhci_check_bw_table(struct xhci_hcd *xhci,
bw_used += overhead + packet_size;
if (!virt_dev->tt_info && virt_dev->udev->speed == USB_SPEED_HIGH) {
- unsigned int port_index = virt_dev->real_port - 1;
-
/* OK, we're manipulating a HS device attached to a
* root port bandwidth domain. Include the number of active TTs
* in the bandwidth used.
*/
bw_used += TT_HS_OVERHEAD *
- xhci->rh_bw[port_index].num_active_tts;
+ xhci->rh_bw[virt_dev->rhub_port->hw_portnum].num_active_tts;
}
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
@@ -2686,7 +2683,7 @@ void xhci_update_tt_active_eps(struct xhci_hcd *xhci,
if (!virt_dev->tt_info)
return;
- rh_bw_info = &xhci->rh_bw[virt_dev->real_port - 1];
+ rh_bw_info = &xhci->rh_bw[virt_dev->rhub_port->hw_portnum];
if (old_active_eps == 0 &&
virt_dev->tt_info->active_eps != 0) {
rh_bw_info->num_active_tts += 1;