diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-08-07 13:11:22 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-08-07 13:11:22 +0000 |
commit | b20732900e4636a467c0183a47f7396700f5f743 (patch) | |
tree | 42f079ff82e701ebcb76829974b4caca3e5b6798 /drivers/usb/host/xhci.c | |
parent | Adding upstream version 6.8.12. (diff) | |
download | linux-b20732900e4636a467c0183a47f7396700f5f743.tar.xz linux-b20732900e4636a467c0183a47f7396700f5f743.zip |
Adding upstream version 6.9.7.upstream/6.9.7
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/usb/host/xhci.c')
-rw-r--r-- | drivers/usb/host/xhci.c | 51 |
1 files changed, 24 insertions, 27 deletions
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index afccd58c9a..8579603eda 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -346,6 +346,23 @@ static int xhci_disable_interrupter(struct xhci_interrupter *ir) return 0; } +/* interrupt moderation interval imod_interval in nanoseconds */ +static int xhci_set_interrupter_moderation(struct xhci_interrupter *ir, + u32 imod_interval) +{ + u32 imod; + + if (!ir || !ir->ir_set || imod_interval > U16_MAX * 250) + return -EINVAL; + + imod = readl(&ir->ir_set->irq_control); + imod &= ~ER_IRQ_INTERVAL_MASK; + imod |= (imod_interval / 250) & ER_IRQ_INTERVAL_MASK; + writel(imod, &ir->ir_set->irq_control); + + return 0; +} + static void compliance_mode_recovery(struct timer_list *t) { struct xhci_hcd *xhci; @@ -528,7 +545,6 @@ static int xhci_run_finished(struct xhci_hcd *xhci) */ int xhci_run(struct usb_hcd *hcd) { - u32 temp; u64 temp_64; int ret; struct xhci_hcd *xhci = hcd_to_xhci(hcd); @@ -551,12 +567,7 @@ int xhci_run(struct usb_hcd *hcd) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "ERST deq = 64'h%0lx", (long unsigned int) temp_64); - xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "// Set the interrupt modulation register"); - temp = readl(&ir->ir_set->irq_control); - temp &= ~ER_IRQ_INTERVAL_MASK; - temp |= (xhci->imod_interval / 250) & ER_IRQ_INTERVAL_MASK; - writel(temp, &ir->ir_set->irq_control); + xhci_set_interrupter_moderation(ir, xhci->imod_interval); if (xhci->quirks & XHCI_NEC_HOST) { struct xhci_command *command; @@ -783,19 +794,7 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci) seg = seg->next; } while (seg != ring->deq_seg); - /* Reset the software enqueue and dequeue pointers */ - ring->deq_seg = ring->first_seg; - ring->dequeue = ring->first_seg->trbs; - ring->enq_seg = ring->deq_seg; - ring->enqueue = ring->dequeue; - - ring->num_trbs_free = ring->num_segs * (TRBS_PER_SEGMENT - 1) - 1; - /* - * Ring is now zeroed, so the HW should look for change of ownership - * when the cycle bit is set to 1. - */ - ring->cycle_state = 1; - + xhci_initialize_ring_info(ring, 1); /* * Reset the hardware dequeue pointer. * Yes, this will need to be re-written after resume, but we're paranoid @@ -2264,7 +2263,7 @@ static int xhci_check_tt_bw_table(struct xhci_hcd *xhci, struct xhci_tt_bw_info *tt_info; /* Find the bandwidth table for the root port this TT is attached to. */ - bw_table = &xhci->rh_bw[virt_dev->real_port - 1].bw_table; + bw_table = &xhci->rh_bw[virt_dev->rhub_port->hw_portnum].bw_table; tt_info = virt_dev->tt_info; /* If this TT already had active endpoints, the bandwidth for this TT * has already been added. Removing all periodic endpoints (and thus @@ -2382,7 +2381,7 @@ static int xhci_check_bw_table(struct xhci_hcd *xhci, if (virt_dev->tt_info) { xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "Recalculating BW for rootport %u", - virt_dev->real_port); + virt_dev->rhub_port->hw_portnum + 1); if (xhci_check_tt_bw_table(xhci, virt_dev, old_active_eps)) { xhci_warn(xhci, "Not enough bandwidth on HS bus for " "newly activated TT.\n"); @@ -2395,7 +2394,7 @@ static int xhci_check_bw_table(struct xhci_hcd *xhci, } else { xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "Recalculating BW for rootport %u", - virt_dev->real_port); + virt_dev->rhub_port->hw_portnum + 1); } /* Add in how much bandwidth will be used for interval zero, or the @@ -2492,14 +2491,12 @@ static int xhci_check_bw_table(struct xhci_hcd *xhci, bw_used += overhead + packet_size; if (!virt_dev->tt_info && virt_dev->udev->speed == USB_SPEED_HIGH) { - unsigned int port_index = virt_dev->real_port - 1; - /* OK, we're manipulating a HS device attached to a * root port bandwidth domain. Include the number of active TTs * in the bandwidth used. */ bw_used += TT_HS_OVERHEAD * - xhci->rh_bw[port_index].num_active_tts; + xhci->rh_bw[virt_dev->rhub_port->hw_portnum].num_active_tts; } xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, @@ -2686,7 +2683,7 @@ void xhci_update_tt_active_eps(struct xhci_hcd *xhci, if (!virt_dev->tt_info) return; - rh_bw_info = &xhci->rh_bw[virt_dev->real_port - 1]; + rh_bw_info = &xhci->rh_bw[virt_dev->rhub_port->hw_portnum]; if (old_active_eps == 0 && virt_dev->tt_info->active_eps != 0) { rh_bw_info->num_active_tts += 1; |