Merging upstream version 6.9.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

15 files changed, 509 insertions, 520 deletions

diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 6c47ab0a49..ad145a54ca 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -66,6 +66,15 @@ struct orion_ehci_hcd {
 static struct hc_driver __read_mostly ehci_orion_hc_driver;
 
 /*
+ * Legacy DMA mask is 32 bit.
+ * AC5 has the DDR starting at 8GB, hence it requires
+ * a larger (34-bit) DMA mask, in order for DMA allocations
+ * to succeed:
+ */
+static const u64 dma_mask_orion =	DMA_BIT_MASK(32);
+static const u64 dma_mask_ac5 =		DMA_BIT_MASK(34);
+
+/*
  * Implement Orion USB controller specification guidelines
  */
 static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
@@ -211,6 +220,7 @@ static int ehci_orion_drv_probe(struct platform_device *pdev)
 	int irq, err;
 	enum orion_ehci_phy_ver phy_version;
 	struct orion_ehci_hcd *priv;
+	u64 *dma_mask_ptr;
 
 	if (usb_disabled())
 		return -ENODEV;
@@ -228,7 +238,8 @@ static int ehci_orion_drv_probe(struct platform_device *pdev)
 	 * set. Since shared usb code relies on it, set it here for
 	 * now. Once we have dma capability bindings this can go away.
 	 */
-	err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	dma_mask_ptr = (u64 *)of_device_get_match_data(&pdev->dev);
+	err = dma_coerce_mask_and_coherent(&pdev->dev, *dma_mask_ptr);
 	if (err)
 		goto err;
 
@@ -332,8 +343,9 @@ static void ehci_orion_drv_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id ehci_orion_dt_ids[] = {
-	{ .compatible = "marvell,orion-ehci", },
-	{ .compatible = "marvell,armada-3700-ehci", },
+	{ .compatible = "marvell,orion-ehci", .data = &dma_mask_orion},
+	{ .compatible = "marvell,armada-3700-ehci", .data = &dma_mask_orion},
+	{ .compatible = "marvell,ac5-ehci", .data = &dma_mask_ac5},
 	{},
 };
 MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids);
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 357d9aee38..3348c25ddb 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -27,7 +27,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
-#include <linux/of_gpio.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/pxa2xx_udc.h>
 #include <linux/platform_device.h>
diff --git a/drivers/usb/host/xhci-caps.h b/drivers/usb/host/xhci-caps.h
new file mode 100644
index 0000000000..9e94cebf4a
--- /dev/null
+++ b/drivers/usb/host/xhci-caps.h
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/* hc_capbase bitmasks */
+/* bits 7:0 - how long is the Capabilities register */
+#define HC_LENGTH(p)		XHCI_HC_LENGTH(p)
+/* bits 31:16	*/
+#define HC_VERSION(p)		(((p) >> 16) & 0xffff)
+
+/* HCSPARAMS1 - hcs_params1 - bitmasks */
+/* bits 0:7, Max Device Slots */
+#define HCS_MAX_SLOTS(p)	(((p) >> 0) & 0xff)
+#define HCS_SLOTS_MASK		0xff
+/* bits 8:18, Max Interrupters */
+#define HCS_MAX_INTRS(p)	(((p) >> 8) & 0x7ff)
+/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */
+#define HCS_MAX_PORTS(p)	(((p) >> 24) & 0x7f)
+
+/* HCSPARAMS2 - hcs_params2 - bitmasks */
+/* bits 0:3, frames or uframes that SW needs to queue transactions
+ * ahead of the HW to meet periodic deadlines */
+#define HCS_IST(p)		(((p) >> 0) & 0xf)
+/* bits 4:7, max number of Event Ring segments */
+#define HCS_ERST_MAX(p)		(((p) >> 4) & 0xf)
+/* bits 21:25 Hi 5 bits of Scratchpad buffers SW must allocate for the HW */
+/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
+/* bits 27:31 Lo 5 bits of Scratchpad buffers SW must allocate for the HW */
+#define HCS_MAX_SCRATCHPAD(p)   ((((p) >> 16) & 0x3e0) | (((p) >> 27) & 0x1f))
+
+/* HCSPARAMS3 - hcs_params3 - bitmasks */
+/* bits 0:7, Max U1 to U0 latency for the roothub ports */
+#define HCS_U1_LATENCY(p)	(((p) >> 0) & 0xff)
+/* bits 16:31, Max U2 to U0 latency for the roothub ports */
+#define HCS_U2_LATENCY(p)	(((p) >> 16) & 0xffff)
+
+/* HCCPARAMS - hcc_params - bitmasks */
+/* true: HC can use 64-bit address pointers */
+#define HCC_64BIT_ADDR(p)	((p) & (1 << 0))
+/* true: HC can do bandwidth negotiation */
+#define HCC_BANDWIDTH_NEG(p)	((p) & (1 << 1))
+/* true: HC uses 64-byte Device Context structures
+ * FIXME 64-byte context structures aren't supported yet.
+ */
+#define HCC_64BYTE_CONTEXT(p)	((p) & (1 << 2))
+/* true: HC has port power switches */
+#define HCC_PPC(p)		((p) & (1 << 3))
+/* true: HC has port indicators */
+#define HCS_INDICATOR(p)	((p) & (1 << 4))
+/* true: HC has Light HC Reset Capability */
+#define HCC_LIGHT_RESET(p)	((p) & (1 << 5))
+/* true: HC supports latency tolerance messaging */
+#define HCC_LTC(p)		((p) & (1 << 6))
+/* true: no secondary Stream ID Support */
+#define HCC_NSS(p)		((p) & (1 << 7))
+/* true: HC supports Stopped - Short Packet */
+#define HCC_SPC(p)		((p) & (1 << 9))
+/* true: HC has Contiguous Frame ID Capability */
+#define HCC_CFC(p)		((p) & (1 << 11))
+/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */
+#define HCC_MAX_PSA(p)		(1 << ((((p) >> 12) & 0xf) + 1))
+/* Extended Capabilities pointer from PCI base - section 5.3.6 */
+#define HCC_EXT_CAPS(p)		XHCI_HCC_EXT_CAPS(p)
+
+#define CTX_SIZE(_hcc)		(HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
+
+/* db_off bitmask - bits 0:1 reserved */
+#define	DBOFF_MASK	(~0x3)
+
+/* run_regs_off bitmask - bits 0:4 reserved */
+#define	RTSOFF_MASK	(~0x1f)
+
+/* HCCPARAMS2 - hcc_params2 - bitmasks */
+/* true: HC supports U3 entry Capability */
+#define	HCC2_U3C(p)		((p) & (1 << 0))
+/* true: HC supports Configure endpoint command Max exit latency too large */
+#define	HCC2_CMC(p)		((p) & (1 << 1))
+/* true: HC supports Force Save context Capability */
+#define	HCC2_FSC(p)		((p) & (1 << 2))
+/* true: HC supports Compliance Transition Capability */
+#define	HCC2_CTC(p)		((p) & (1 << 3))
+/* true: HC support Large ESIT payload Capability > 48k */
+#define	HCC2_LEC(p)		((p) & (1 << 4))
+/* true: HC support Configuration Information Capability */
+#define	HCC2_CIC(p)		((p) & (1 << 5))
+/* true: HC support Extended TBC Capability, Isoc burst count > 65535 */
+#define	HCC2_ETC(p)		((p) & (1 << 6))
diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c
index d82935d311..8a9869ef0d 100644
--- a/drivers/usb/host/xhci-dbgcap.c
+++ b/drivers/usb/host/xhci-dbgcap.c
@@ -634,7 +634,8 @@ static int xhci_dbc_start(struct xhci_dbc *dbc)
 		return ret;
 	}
 
-	return mod_delayed_work(system_wq, &dbc->event_work, 1);
+	return mod_delayed_work(system_wq, &dbc->event_work,
+				msecs_to_jiffies(dbc->poll_interval));
 }
 
 static void xhci_dbc_stop(struct xhci_dbc *dbc)
@@ -899,8 +900,10 @@ static void xhci_dbc_handle_events(struct work_struct *work)
 	enum evtreturn		evtr;
 	struct xhci_dbc		*dbc;
 	unsigned long		flags;
+	unsigned int		poll_interval;
 
 	dbc = container_of(to_delayed_work(work), struct xhci_dbc, event_work);
+	poll_interval = dbc->poll_interval;
 
 	spin_lock_irqsave(&dbc->lock, flags);
 	evtr = xhci_dbc_do_handle_events(dbc);
@@ -916,13 +919,18 @@ static void xhci_dbc_handle_events(struct work_struct *work)
 			dbc->driver->disconnect(dbc);
 		break;
 	case EVT_DONE:
+		/* set fast poll rate if there are pending data transfers */
+		if (!list_empty(&dbc->eps[BULK_OUT].list_pending) ||
+		    !list_empty(&dbc->eps[BULK_IN].list_pending))
+			poll_interval = 1;
 		break;
 	default:
 		dev_info(dbc->dev, "stop handling dbc events\n");
 		return;
 	}
 
-	mod_delayed_work(system_wq, &dbc->event_work, 1);
+	mod_delayed_work(system_wq, &dbc->event_work,
+			 msecs_to_jiffies(poll_interval));
 }
 
 static const char * const dbc_state_strings[DS_MAX] = {
@@ -1175,6 +1183,7 @@ xhci_alloc_dbc(struct device *dev, void __iomem *base, const struct dbc_driver *
 	dbc->idVendor = DBC_VENDOR_ID;
 	dbc->bcdDevice = DBC_DEVICE_REV;
 	dbc->bInterfaceProtocol = DBC_PROTOCOL;
+	dbc->poll_interval = DBC_POLL_INTERVAL_DEFAULT;
 
 	if (readl(&dbc->regs->control) & DBC_CTRL_DBC_ENABLE)
 		goto err;
diff --git a/drivers/usb/host/xhci-dbgcap.h b/drivers/usb/host/xhci-dbgcap.h
index e39e3ae167..92661b555c 100644
--- a/drivers/usb/host/xhci-dbgcap.h
+++ b/drivers/usb/host/xhci-dbgcap.h
@@ -94,6 +94,7 @@ struct dbc_ep {
 
 #define DBC_QUEUE_SIZE			16
 #define DBC_WRITE_BUF_SIZE		8192
+#define DBC_POLL_INTERVAL_DEFAULT	64	/* milliseconds */
 
 /*
  * Private structure for DbC hardware state:
@@ -140,6 +141,7 @@ struct xhci_dbc {
 
 	enum dbc_state			state;
 	struct delayed_work		event_work;
+	unsigned int			poll_interval;	/* ms */
 	unsigned			resume_required:1;
 	struct dbc_ep			eps[2];
 
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 0980ade2a2..61f083de6e 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -448,38 +448,6 @@ u32 xhci_port_state_to_neutral(u32 state)
 }
 EXPORT_SYMBOL_GPL(xhci_port_state_to_neutral);
 
-/**
- * xhci_find_slot_id_by_port() - Find slot id of a usb device on a roothub port
- * @hcd: pointer to hcd of the roothub
- * @xhci: pointer to xhci structure
- * @port: one-based port number of the port in this roothub.
- *
- * Return: Slot id of the usb device connected to the root port, 0 if not found
- */
-
-int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
-		u16 port)
-{
-	int slot_id;
-	int i;
-	enum usb_device_speed speed;
-
-	slot_id = 0;
-	for (i = 0; i < MAX_HC_SLOTS; i++) {
-		if (!xhci->devs[i] || !xhci->devs[i]->udev)
-			continue;
-		speed = xhci->devs[i]->udev->speed;
-		if (((speed >= USB_SPEED_SUPER) == (hcd->speed >= HCD_USB3))
-				&& xhci->devs[i]->fake_port == port) {
-			slot_id = i;
-			break;
-		}
-	}
-
-	return slot_id;
-}
-EXPORT_SYMBOL_GPL(xhci_find_slot_id_by_port);
-
 /*
  * Stop device
  * It issues stop endpoint command for EP 0 to 30. And wait the last command
@@ -930,7 +898,6 @@ static int xhci_handle_usb2_port_link_resume(struct xhci_port *port,
 	struct xhci_bus_state *bus_state;
 	struct xhci_hcd	*xhci;
 	struct usb_hcd *hcd;
-	int slot_id;
 	u32 wIndex;
 
 	hcd = port->rhub->hcd;
@@ -986,13 +953,11 @@ static int xhci_handle_usb2_port_link_resume(struct xhci_port *port,
 		spin_lock_irqsave(&xhci->lock, *flags);
 
 		if (time_left) {
-			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-							    wIndex + 1);
-			if (!slot_id) {
+			if (!port->slot_id) {
 				xhci_dbg(xhci, "slot_id is zero\n");
 				return -ENODEV;
 			}
-			xhci_ring_device(xhci, slot_id);
+			xhci_ring_device(xhci, port->slot_id);
 		} else {
 			int port_status = readl(port->addr);
 
@@ -1202,7 +1167,6 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 	unsigned long flags;
 	u32 temp, status;
 	int retval = 0;
-	int slot_id;
 	struct xhci_bus_state *bus_state;
 	u16 link_state = 0;
 	u16 wake_mask = 0;
@@ -1332,15 +1296,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				goto error;
 			}
 
-			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-							    portnum1);
-			if (!slot_id) {
+			if (!port->slot_id) {
 				xhci_warn(xhci, "slot_id is zero\n");
 				goto error;
 			}
 			/* unlock to execute stop endpoint commands */
 			spin_unlock_irqrestore(&xhci->lock, flags);
-			xhci_stop_device(xhci, slot_id, 1);
+			xhci_stop_device(xhci, port->slot_id, 1);
 			spin_lock_irqsave(&xhci->lock, flags);
 
 			xhci_set_link_state(xhci, port, XDEV_U3);
@@ -1463,14 +1425,12 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 
 			if (link_state == USB_SS_PORT_LS_U3) {
 				int retries = 16;
-				slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-								    portnum1);
-				if (slot_id) {
+				if (port->slot_id) {
 					/* unlock to execute stop endpoint
 					 * commands */
 					spin_unlock_irqrestore(&xhci->lock,
 								flags);
-					xhci_stop_device(xhci, slot_id, 1);
+					xhci_stop_device(xhci, port->slot_id, 1);
 					spin_lock_irqsave(&xhci->lock, flags);
 				}
 				xhci_set_link_state(xhci, port, USB_SS_PORT_LS_U3);
@@ -1584,13 +1544,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			}
 			bus_state->port_c_suspend |= 1 << wIndex;
 
-			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-					portnum1);
-			if (!slot_id) {
+			if (!port->slot_id) {
 				xhci_dbg(xhci, "slot_id is zero\n");
 				goto error;
 			}
-			xhci_ring_device(xhci, slot_id);
+			xhci_ring_device(xhci, port->slot_id);
 			break;
 		case USB_PORT_FEAT_C_SUSPEND:
 			bus_state->port_c_suspend &= ~(1 << wIndex);
@@ -1821,10 +1779,7 @@ retry:
 		if (!portsc_buf[port_index])
 			continue;
 		if (test_bit(port_index, &bus_state->bus_suspended)) {
-			int slot_id;
-
-			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-							    port_index + 1);
+			int slot_id = ports[port_index]->slot_id;
 			if (slot_id) {
 				spin_unlock_irqrestore(&xhci->lock, flags);
 				xhci_stop_device(xhci, slot_id, 1);
@@ -1877,7 +1832,6 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 	struct xhci_bus_state *bus_state;
 	unsigned long flags;
 	int max_ports, port_index;
-	int slot_id;
 	int sret;
 	u32 next_state;
 	u32 temp, portsc;
@@ -1970,9 +1924,8 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 			continue;
 		}
 		xhci_test_and_clear_bit(xhci, ports[port_index], PORT_PLC);
-		slot_id = xhci_find_slot_id_by_port(hcd, xhci, port_index + 1);
-		if (slot_id)
-			xhci_ring_device(xhci, slot_id);
+		if (ports[port_index]->slot_id)
+			xhci_ring_device(xhci, ports[port_index]->slot_id);
 	}
 	(void) readl(&xhci->op_regs->command);
 
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 450adaca68..990008aebe 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -84,7 +84,7 @@ static void xhci_free_segments_for_ring(struct xhci_hcd *xhci,
 	struct xhci_segment *seg;
 
 	seg = first->next;
-	while (seg != first) {
+	while (seg && seg != first) {
 		struct xhci_segment *next = seg->next;
 		xhci_segment_free(xhci, seg);
 		seg = next;
@@ -351,17 +351,10 @@ static int xhci_alloc_segments_for_ring(struct xhci_hcd *xhci,
 
 		next = xhci_segment_alloc(xhci, cycle_state, max_packet, num,
 					  flags);
-		if (!next) {
-			prev = *first;
-			while (prev) {
-				next = prev->next;
-				xhci_segment_free(xhci, prev);
-				prev = next;
-			}
-			return -ENOMEM;
-		}
-		xhci_link_segments(prev, next, type, chain_links);
+		if (!next)
+			goto free_segments;
 
+		xhci_link_segments(prev, next, type, chain_links);
 		prev = next;
 		num++;
 	}
@@ -369,6 +362,10 @@ static int xhci_alloc_segments_for_ring(struct xhci_hcd *xhci,
 	*last = prev;
 
 	return 0;
+
+free_segments:
+	xhci_free_segments_for_ring(xhci, *first);
+	return -ENOMEM;
 }
 
 /*
@@ -444,19 +441,11 @@ int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
 	if (ret)
 		return -ENOMEM;
 
-	if (ring->type == TYPE_STREAM)
+	if (ring->type == TYPE_STREAM) {
 		ret = xhci_update_stream_segment_mapping(ring->trb_address_map,
 						ring, first, last, flags);
-	if (ret) {
-		struct xhci_segment *next;
-		do {
-			next = first->next;
-			xhci_segment_free(xhci, first);
-			if (first == last)
-				break;
-			first = next;
-		} while (true);
-		return ret;
+		if (ret)
+			goto free_segments;
 	}
 
 	xhci_link_rings(xhci, ring, first, last, num_new_segs);
@@ -466,6 +455,10 @@ int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
 			ring->num_segs);
 
 	return 0;
+
+free_segments:
+	xhci_free_segments_for_ring(xhci, first);
+	return ret;
 }
 
 struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
@@ -789,15 +782,14 @@ static void xhci_free_tt_info(struct xhci_hcd *xhci,
 	bool slot_found = false;
 
 	/* If the device never made it past the Set Address stage,
-	 * it may not have the real_port set correctly.
+	 * it may not have the root hub port pointer set correctly.
 	 */
-	if (virt_dev->real_port == 0 ||
-			virt_dev->real_port > HCS_MAX_PORTS(xhci->hcs_params1)) {
-		xhci_dbg(xhci, "Bad real port.\n");
+	if (!virt_dev->rhub_port) {
+		xhci_dbg(xhci, "Bad rhub port.\n");
 		return;
 	}
 
-	tt_list_head = &(xhci->rh_bw[virt_dev->real_port - 1].tts);
+	tt_list_head = &(xhci->rh_bw[virt_dev->rhub_port->hw_portnum].tts);
 	list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) {
 		/* Multi-TT hubs will have more than one entry */
 		if (tt_info->slot_id == slot_id) {
@@ -834,7 +826,7 @@ int xhci_alloc_tt_info(struct xhci_hcd *xhci,
 			goto free_tts;
 		INIT_LIST_HEAD(&tt_info->tt_list);
 		list_add(&tt_info->tt_list,
-				&xhci->rh_bw[virt_dev->real_port - 1].tts);
+				&xhci->rh_bw[virt_dev->rhub_port->hw_portnum].tts);
 		tt_info->slot_id = virt_dev->udev->slot_id;
 		if (tt->multi)
 			tt_info->ttport = i+1;
@@ -908,6 +900,8 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 
 	if (dev->udev && dev->udev->slot_id)
 		dev->udev->slot_id = 0;
+	if (dev->rhub_port && dev->rhub_port->slot_id == slot_id)
+		dev->rhub_port->slot_id = 0;
 	kfree(xhci->devs[slot_id]);
 	xhci->devs[slot_id] = NULL;
 }
@@ -929,13 +923,12 @@ static void xhci_free_virt_devices_depth_first(struct xhci_hcd *xhci, int slot_i
 	if (!vdev)
 		return;
 
-	if (vdev->real_port == 0 ||
-			vdev->real_port > HCS_MAX_PORTS(xhci->hcs_params1)) {
-		xhci_dbg(xhci, "Bad vdev->real_port.\n");
+	if (!vdev->rhub_port) {
+		xhci_dbg(xhci, "Bad rhub port.\n");
 		goto out;
 	}
 
-	tt_list_head = &(xhci->rh_bw[vdev->real_port - 1].tts);
+	tt_list_head = &(xhci->rh_bw[vdev->rhub_port->hw_portnum].tts);
 	list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) {
 		/* is this a hub device that added a tt_info to the tts list */
 		if (tt_info->slot_id == slot_id) {
@@ -1051,16 +1044,16 @@ void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
  * The xHCI roothub may have ports of differing speeds in any order in the port
  * status registers.
  *
- * The xHCI hardware wants to know the roothub port number that the USB device
+ * The xHCI hardware wants to know the roothub port that the USB device
  * is attached to (or the roothub port its ancestor hub is attached to).  All we
  * know is the index of that port under either the USB 2.0 or the USB 3.0
  * roothub, but that doesn't give us the real index into the HW port status
- * registers. Call xhci_find_raw_port_number() to get real index.
+ * registers.
  */
-static u32 xhci_find_real_port_number(struct xhci_hcd *xhci,
-		struct usb_device *udev)
+static struct xhci_port *xhci_find_rhub_port(struct xhci_hcd *xhci, struct usb_device *udev)
 {
 	struct usb_device *top_dev;
+	struct xhci_hub *rhub;
 	struct usb_hcd *hcd;
 
 	if (udev->speed >= USB_SPEED_SUPER)
@@ -1072,7 +1065,8 @@ static u32 xhci_find_real_port_number(struct xhci_hcd *xhci,
 			top_dev = top_dev->parent)
 		/* Found device below root hub */;
 
-	return	xhci_find_raw_port_number(hcd, top_dev->portnum);
+	rhub = xhci_get_rhub(hcd);
+	return rhub->ports[top_dev->portnum - 1];
 }
 
 /* Setup an xHCI virtual device for a Set Address command */
@@ -1081,9 +1075,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	struct xhci_virt_device *dev;
 	struct xhci_ep_ctx	*ep0_ctx;
 	struct xhci_slot_ctx    *slot_ctx;
-	u32			port_num;
 	u32			max_packets;
-	struct usb_device *top_dev;
 
 	dev = xhci->devs[udev->slot_id];
 	/* Slot ID 0 is reserved */
@@ -1124,18 +1116,15 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 		return -EINVAL;
 	}
 	/* Find the root hub port this device is under */
-	port_num = xhci_find_real_port_number(xhci, udev);
-	if (!port_num)
+	dev->rhub_port = xhci_find_rhub_port(xhci, udev);
+	if (!dev->rhub_port)
 		return -EINVAL;
-	slot_ctx->dev_info2 |= cpu_to_le32(ROOT_HUB_PORT(port_num));
-	/* Set the port number in the virtual_device to the faked port number */
-	for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
-			top_dev = top_dev->parent)
-		/* Found device below root hub */;
-	dev->fake_port = top_dev->portnum;
-	dev->real_port = port_num;
-	xhci_dbg(xhci, "Set root hub portnum to %d\n", port_num);
-	xhci_dbg(xhci, "Set fake root hub portnum to %d\n", dev->fake_port);
+	/* Slot ID is set to the device directly below the root hub */
+	if (!udev->parent->parent)
+		dev->rhub_port->slot_id = udev->slot_id;
+	slot_ctx->dev_info2 |= cpu_to_le32(ROOT_HUB_PORT(dev->rhub_port->hw_portnum + 1));
+	xhci_dbg(xhci, "Slot ID %d: HW portnum %d, hcd portnum %d\n",
+		 udev->slot_id, dev->rhub_port->hw_portnum, dev->rhub_port->hcd_portnum);
 
 	/* Find the right bandwidth table that this device will be a part of.
 	 * If this is a full speed device attached directly to a root port (or a
@@ -1144,12 +1133,12 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	 * will never be created for the HS root hub.
 	 */
 	if (!udev->tt || !udev->tt->hub->parent) {
-		dev->bw_table = &xhci->rh_bw[port_num - 1].bw_table;
+		dev->bw_table = &xhci->rh_bw[dev->rhub_port->hw_portnum].bw_table;
 	} else {
 		struct xhci_root_port_bw_info *rh_bw;
 		struct xhci_tt_bw_info *tt_bw;
 
-		rh_bw = &xhci->rh_bw[port_num - 1];
+		rh_bw = &xhci->rh_bw[dev->rhub_port->hw_portnum];
 		/* Find the right TT. */
 		list_for_each_entry(tt_bw, &rh_bw->tts, tt_list) {
 			if (tt_bw->slot_id != udev->tt->hub->slot_id)
@@ -2280,24 +2269,24 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
 }
 
 static struct xhci_interrupter *
-xhci_alloc_interrupter(struct xhci_hcd *xhci, int segs, gfp_t flags)
+xhci_alloc_interrupter(struct xhci_hcd *xhci, unsigned int segs, gfp_t flags)
 {
 	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
 	struct xhci_interrupter *ir;
-	unsigned int num_segs = segs;
+	unsigned int max_segs;
 	int ret;
 
+	if (!segs)
+		segs = ERST_DEFAULT_SEGS;
+
+	max_segs = BIT(HCS_ERST_MAX(xhci->hcs_params2));
+	segs = min(segs, max_segs);
+
 	ir = kzalloc_node(sizeof(*ir), flags, dev_to_node(dev));
 	if (!ir)
 		return NULL;
 
-	/* number of ring segments should be greater than 0 */
-	if (segs <= 0)
-		num_segs = min_t(unsigned int, 1 << HCS_ERST_MAX(xhci->hcs_params2),
-			 ERST_MAX_SEGS);
-
-	ir->event_ring = xhci_ring_alloc(xhci, num_segs, 1, TYPE_EVENT, 0,
-					 flags);
+	ir->event_ring = xhci_ring_alloc(xhci, segs, 1, TYPE_EVENT, 0, flags);
 	if (!ir->event_ring) {
 		xhci_warn(xhci, "Failed to allocate interrupter event ring\n");
 		kfree(ir);
@@ -2355,7 +2344,7 @@ xhci_add_interrupter(struct xhci_hcd *xhci, struct xhci_interrupter *ir,
 }
 
 struct xhci_interrupter *
-xhci_create_secondary_interrupter(struct usb_hcd *hcd, int num_seg)
+xhci_create_secondary_interrupter(struct usb_hcd *hcd, unsigned int segs)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 	struct xhci_interrupter *ir;
@@ -2365,7 +2354,7 @@ xhci_create_secondary_interrupter(struct usb_hcd *hcd, int num_seg)
 	if (!xhci->interrupters || xhci->max_interrupters <= 1)
 		return NULL;
 
-	ir = xhci_alloc_interrupter(xhci, num_seg, GFP_KERNEL);
+	ir = xhci_alloc_interrupter(xhci, segs, GFP_KERNEL);
 	if (!ir)
 		return NULL;
 
diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c
index 61f3f8bbdc..27eb384a39 100644
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -122,10 +122,6 @@ static u32 get_bw_boundary(enum usb_device_speed speed)
 * each HS root port is treated as a single bandwidth domain,
 * but each SS root port is treated as two bandwidth domains, one for IN eps,
 * one for OUT eps.
-* @real_port value is defined as follow according to xHCI spec:
-* 1 for SSport0, ..., N+1 for SSportN, N+2 for HSport0, N+3 for HSport1, etc
-* so the bandwidth domain array is organized as follow for simplification:
-* SSport0-OUT, SSport0-IN, ..., SSportX-OUT, SSportX-IN, HSport0, ..., HSportY
 */
 static struct mu3h_sch_bw_info *
 get_bw_info(struct xhci_hcd_mtk *mtk, struct usb_device *udev,
@@ -136,19 +132,19 @@ get_bw_info(struct xhci_hcd_mtk *mtk, struct usb_device *udev,
 	int bw_index;
 
 	virt_dev = xhci->devs[udev->slot_id];
-	if (!virt_dev->real_port) {
-		WARN_ONCE(1, "%s invalid real_port\n", dev_name(&udev->dev));
+	if (!virt_dev->rhub_port) {
+		WARN_ONCE(1, "%s invalid rhub port\n", dev_name(&udev->dev));
 		return NULL;
 	}
 
 	if (udev->speed >= USB_SPEED_SUPER) {
 		if (usb_endpoint_dir_out(&ep->desc))
-			bw_index = (virt_dev->real_port - 1) * 2;
+			bw_index = (virt_dev->rhub_port->hw_portnum) * 2;
 		else
-			bw_index = (virt_dev->real_port - 1) * 2 + 1;
+			bw_index = (virt_dev->rhub_port->hw_portnum) * 2 + 1;
 	} else {
 		/* add one more for each SS port */
-		bw_index = virt_dev->real_port + xhci->usb3_rhub.num_ports - 1;
+		bw_index = virt_dev->rhub_port->hw_portnum + xhci->usb3_rhub.num_ports;
 	}
 
 	return &mtk->sch_array[bw_index];
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index b534ca9752..febf647234 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -36,6 +36,7 @@
 
 #define PCI_VENDOR_ID_ETRON		0x1b6f
 #define PCI_DEVICE_ID_EJ168		0x7023
+#define PCI_DEVICE_ID_EJ188		0x7052
 
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI	0x8c31
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI	0x9c31
@@ -270,17 +271,12 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 				"QUIRK: Fresco Logic revision %u "
 				"has broken MSI implementation",
 				pdev->revision);
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 	}
 
 	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
 			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1009)
 		xhci->quirks |= XHCI_BROKEN_STREAMS;
 
-	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
-			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1100)
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
-
 	if (pdev->vendor == PCI_VENDOR_ID_NEC)
 		xhci->quirks |= XHCI_NEC_HOST;
 
@@ -307,8 +303,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
 	}
 
-	if (pdev->vendor == PCI_VENDOR_ID_AMD)
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x43f7)
+		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
 
 	if ((pdev->vendor == PCI_VENDOR_ID_AMD) &&
 		((pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4) ||
@@ -396,12 +392,16 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 			pdev->device == PCI_DEVICE_ID_EJ168) {
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 		xhci->quirks |= XHCI_BROKEN_STREAMS;
 	}
+	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
+			pdev->device == PCI_DEVICE_ID_EJ188) {
+		xhci->quirks |= XHCI_RESET_ON_RESUME;
+		xhci->quirks |= XHCI_BROKEN_STREAMS;
+	}
+
 	if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
 	    pdev->device == 0x0014) {
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 		xhci->quirks |= XHCI_ZERO_64B_REGS;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
@@ -431,7 +431,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
 		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) {
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 		xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
@@ -820,7 +819,6 @@ static int xhci_pci_poweroff_late(struct usb_hcd *hcd, bool do_wakeup)
 	struct xhci_hcd		*xhci = hcd_to_xhci(hcd);
 	struct xhci_port	*port;
 	struct usb_device	*udev;
-	unsigned int		slot_id;
 	u32			portsc;
 	int			i;
 
@@ -843,15 +841,14 @@ static int xhci_pci_poweroff_late(struct usb_hcd *hcd, bool do_wakeup)
 		if ((portsc & PORT_PLS_MASK) != XDEV_U3)
 			continue;
 
-		slot_id = xhci_find_slot_id_by_port(port->rhub->hcd, xhci,
-						    port->hcd_portnum + 1);
-		if (!slot_id || !xhci->devs[slot_id]) {
+		if (!port->slot_id || !xhci->devs[port->slot_id]) {
 			xhci_err(xhci, "No dev for slot_id %d for port %d-%d in U3\n",
-				 slot_id, port->rhub->hcd->self.busnum, port->hcd_portnum + 1);
+				 port->slot_id, port->rhub->hcd->self.busnum,
+				 port->hcd_portnum + 1);
 			continue;
 		}
 
-		udev = xhci->devs[slot_id]->udev;
+		udev = xhci->devs[port->slot_id]->udev;
 
 		/* if wakeup is enabled then don't disable the port */
 		if (udev->do_remote_wakeup && do_wakeup)
diff --git a/drivers/usb/host/xhci-port.h b/drivers/usb/host/xhci-port.h
new file mode 100644
index 0000000000..f19efb966d
--- /dev/null
+++ b/drivers/usb/host/xhci-port.h
@@ -0,0 +1,176 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/* PORTSC - Port Status and Control Register - port_status_base bitmasks */
+/* true: device connected */
+#define PORT_CONNECT	(1 << 0)
+/* true: port enabled */
+#define PORT_PE		(1 << 1)
+/* bit 2 reserved and zeroed */
+/* true: port has an over-current condition */
+#define PORT_OC		(1 << 3)
+/* true: port reset signaling asserted */
+#define PORT_RESET	(1 << 4)
+/* Port Link State - bits 5:8
+ * A read gives the current link PM state of the port,
+ * a write with Link State Write Strobe set sets the link state.
+ */
+#define PORT_PLS_MASK	(0xf << 5)
+#define XDEV_U0		(0x0 << 5)
+#define XDEV_U1		(0x1 << 5)
+#define XDEV_U2		(0x2 << 5)
+#define XDEV_U3		(0x3 << 5)
+#define XDEV_DISABLED	(0x4 << 5)
+#define XDEV_RXDETECT	(0x5 << 5)
+#define XDEV_INACTIVE	(0x6 << 5)
+#define XDEV_POLLING	(0x7 << 5)
+#define XDEV_RECOVERY	(0x8 << 5)
+#define XDEV_HOT_RESET	(0x9 << 5)
+#define XDEV_COMP_MODE	(0xa << 5)
+#define XDEV_TEST_MODE	(0xb << 5)
+#define XDEV_RESUME	(0xf << 5)
+
+/* true: port has power (see HCC_PPC) */
+#define PORT_POWER	(1 << 9)
+/* bits 10:13 indicate device speed:
+ * 0 - undefined speed - port hasn't be initialized by a reset yet
+ * 1 - full speed
+ * 2 - low speed
+ * 3 - high speed
+ * 4 - super speed
+ * 5-15 reserved
+ */
+#define DEV_SPEED_MASK		(0xf << 10)
+#define	XDEV_FS			(0x1 << 10)
+#define	XDEV_LS			(0x2 << 10)
+#define	XDEV_HS			(0x3 << 10)
+#define	XDEV_SS			(0x4 << 10)
+#define	XDEV_SSP		(0x5 << 10)
+#define DEV_UNDEFSPEED(p)	(((p) & DEV_SPEED_MASK) == (0x0<<10))
+#define DEV_FULLSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_FS)
+#define DEV_LOWSPEED(p)		(((p) & DEV_SPEED_MASK) == XDEV_LS)
+#define DEV_HIGHSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_HS)
+#define DEV_SUPERSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_SS)
+#define DEV_SUPERSPEEDPLUS(p)	(((p) & DEV_SPEED_MASK) == XDEV_SSP)
+#define DEV_SUPERSPEED_ANY(p)	(((p) & DEV_SPEED_MASK) >= XDEV_SS)
+#define DEV_PORT_SPEED(p)	(((p) >> 10) & 0x0f)
+
+/* Bits 20:23 in the Slot Context are the speed for the device */
+#define	SLOT_SPEED_FS		(XDEV_FS << 10)
+#define	SLOT_SPEED_LS		(XDEV_LS << 10)
+#define	SLOT_SPEED_HS		(XDEV_HS << 10)
+#define	SLOT_SPEED_SS		(XDEV_SS << 10)
+#define	SLOT_SPEED_SSP		(XDEV_SSP << 10)
+/* Port Indicator Control */
+#define PORT_LED_OFF	(0 << 14)
+#define PORT_LED_AMBER	(1 << 14)
+#define PORT_LED_GREEN	(2 << 14)
+#define PORT_LED_MASK	(3 << 14)
+/* Port Link State Write Strobe - set this when changing link state */
+#define PORT_LINK_STROBE	(1 << 16)
+/* true: connect status change */
+#define PORT_CSC	(1 << 17)
+/* true: port enable change */
+#define PORT_PEC	(1 << 18)
+/* true: warm reset for a USB 3.0 device is done.  A "hot" reset puts the port
+ * into an enabled state, and the device into the default state.  A "warm" reset
+ * also resets the link, forcing the device through the link training sequence.
+ * SW can also look at the Port Reset register to see when warm reset is done.
+ */
+#define PORT_WRC	(1 << 19)
+/* true: over-current change */
+#define PORT_OCC	(1 << 20)
+/* true: reset change - 1 to 0 transition of PORT_RESET */
+#define PORT_RC		(1 << 21)
+/* port link status change - set on some port link state transitions:
+ *  Transition				Reason
+ *  ------------------------------------------------------------------------------
+ *  - U3 to Resume			Wakeup signaling from a device
+ *  - Resume to Recovery to U0		USB 3.0 device resume
+ *  - Resume to U0			USB 2.0 device resume
+ *  - U3 to Recovery to U0		Software resume of USB 3.0 device complete
+ *  - U3 to U0				Software resume of USB 2.0 device complete
+ *  - U2 to U0				L1 resume of USB 2.1 device complete
+ *  - U0 to U0 (???)			L1 entry rejection by USB 2.1 device
+ *  - U0 to disabled			L1 entry error with USB 2.1 device
+ *  - Any state to inactive		Error on USB 3.0 port
+ */
+#define PORT_PLC	(1 << 22)
+/* port configure error change - port failed to configure its link partner */
+#define PORT_CEC	(1 << 23)
+#define PORT_CHANGE_MASK	(PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
+				 PORT_RC | PORT_PLC | PORT_CEC)
+
+
+/* Cold Attach Status - xHC can set this bit to report device attached during
+ * Sx state. Warm port reset should be perfomed to clear this bit and move port
+ * to connected state.
+ */
+#define PORT_CAS	(1 << 24)
+/* wake on connect (enable) */
+#define PORT_WKCONN_E	(1 << 25)
+/* wake on disconnect (enable) */
+#define PORT_WKDISC_E	(1 << 26)
+/* wake on over-current (enable) */
+#define PORT_WKOC_E	(1 << 27)
+/* bits 28:29 reserved */
+/* true: device is non-removable - for USB 3.0 roothub emulation */
+#define PORT_DEV_REMOVE	(1 << 30)
+/* Initiate a warm port reset - complete when PORT_WRC is '1' */
+#define PORT_WR		(1 << 31)
+
+/* We mark duplicate entries with -1 */
+#define DUPLICATE_ENTRY ((u8)(-1))
+
+/* Port Power Management Status and Control - port_power_base bitmasks */
+/* Inactivity timer value for transitions into U1, in microseconds.
+ * Timeout can be up to 127us.  0xFF means an infinite timeout.
+ */
+#define PORT_U1_TIMEOUT(p)	((p) & 0xff)
+#define PORT_U1_TIMEOUT_MASK	0xff
+/* Inactivity timer value for transitions into U2 */
+#define PORT_U2_TIMEOUT(p)	(((p) & 0xff) << 8)
+#define PORT_U2_TIMEOUT_MASK	(0xff << 8)
+/* Bits 24:31 for port testing */
+
+/* USB2 Protocol PORTSPMSC */
+#define	PORT_L1S_MASK		7
+#define	PORT_L1S_SUCCESS	1
+#define	PORT_RWE		(1 << 3)
+#define	PORT_HIRD(p)		(((p) & 0xf) << 4)
+#define	PORT_HIRD_MASK		(0xf << 4)
+#define	PORT_L1DS_MASK		(0xff << 8)
+#define	PORT_L1DS(p)		(((p) & 0xff) << 8)
+#define	PORT_HLE		(1 << 16)
+#define PORT_TEST_MODE_SHIFT	28
+
+/* USB3 Protocol PORTLI  Port Link Information */
+#define PORT_RX_LANES(p)	(((p) >> 16) & 0xf)
+#define PORT_TX_LANES(p)	(((p) >> 20) & 0xf)
+
+/* USB2 Protocol PORTHLPMC */
+#define PORT_HIRDM(p)((p) & 3)
+#define PORT_L1_TIMEOUT(p)(((p) & 0xff) << 2)
+#define PORT_BESLD(p)(((p) & 0xf) << 10)
+
+/* use 512 microseconds as USB2 LPM L1 default timeout. */
+#define XHCI_L1_TIMEOUT		512
+
+/* Set default HIRD/BESL value to 4 (350/400us) for USB2 L1 LPM resume latency.
+ * Safe to use with mixed HIRD and BESL systems (host and device) and is used
+ * by other operating systems.
+ *
+ * XHCI 1.0 errata 8/14/12 Table 13 notes:
+ * "Software should choose xHC BESL/BESLD field values that do not violate a
+ * device's resume latency requirements,
+ * e.g. not program values > '4' if BLC = '1' and a HIRD device is attached,
+ * or not program values < '4' if BLC = '0' and a BESL device is attached.
+ */
+#define XHCI_DEFAULT_BESL	4
+
+/*
+ * USB3 specification define a 360ms tPollingLFPSTiemout for USB3 ports
+ * to complete link training. usually link trainig completes much faster
+ * so check status 10 times with 36ms sleep in places we need to wait for
+ * polling to complete.
+ */
+#define XHCI_PORT_POLLING_LFPS_TIME  36
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
index ab9c5969e4..8b35764772 100644
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -214,8 +214,7 @@ static int xhci_rcar_resume_quirk(struct usb_hcd *hcd)
  */
 #define SET_XHCI_PLAT_PRIV_FOR_RCAR(firmware)				\
 	.firmware_name = firmware,					\
-	.quirks = XHCI_NO_64BIT_SUPPORT | XHCI_TRUST_TX_LENGTH |	\
-		  XHCI_SLOW_SUSPEND,					\
+	.quirks = XHCI_NO_64BIT_SUPPORT |  XHCI_SLOW_SUSPEND,		\
 	.init_quirk = xhci_rcar_init_quirk,				\
 	.plat_start = xhci_rcar_start,					\
 	.resume_quirk = xhci_rcar_resume_quirk,
@@ -229,8 +228,7 @@ static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = {
 };
 
 static const struct xhci_plat_priv xhci_plat_renesas_rzv2m = {
-	.quirks = XHCI_NO_64BIT_SUPPORT | XHCI_TRUST_TX_LENGTH |
-		  XHCI_SLOW_SUSPEND,
+	.quirks = XHCI_NO_64BIT_SUPPORT | XHCI_SLOW_SUSPEND,
 	.init_quirk = xhci_rzv2m_init_quirk,
 	.plat_start = xhci_rzv2m_start,
 };
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index b2868217de..48d745e9f9 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -113,6 +113,12 @@ static bool last_td_in_urb(struct xhci_td *td)
 	return urb_priv->num_tds_done == urb_priv->num_tds;
 }
 
+static bool unhandled_event_trb(struct xhci_ring *ring)
+{
+	return ((le32_to_cpu(ring->dequeue->event_cmd.flags) & TRB_CYCLE) ==
+		ring->cycle_state);
+}
+
 static void inc_td_cnt(struct urb *urb)
 {
 	struct urb_priv *urb_priv = urb->hcpriv;
@@ -1028,13 +1034,27 @@ static int xhci_invalidate_cancelled_tds(struct xhci_virt_ep *ep)
 				break;
 			case TD_DIRTY: /* TD is cached, clear it */
 			case TD_HALTED:
+			case TD_CLEARING_CACHE_DEFERRED:
+				if (cached_td) {
+					if (cached_td->urb->stream_id != td->urb->stream_id) {
+						/* Multiple streams case, defer move dq */
+						xhci_dbg(xhci,
+							 "Move dq deferred: stream %u URB %p\n",
+							 td->urb->stream_id, td->urb);
+						td->cancel_status = TD_CLEARING_CACHE_DEFERRED;
+						break;
+					}
+
+					/* Should never happen, but clear the TD if it does */
+					xhci_warn(xhci,
+						  "Found multiple active URBs %p and %p in stream %u?\n",
+						  td->urb, cached_td->urb,
+						  td->urb->stream_id);
+					td_to_noop(xhci, ring, cached_td, false);
+					cached_td->cancel_status = TD_CLEARED;
+				}
+
 				td->cancel_status = TD_CLEARING_CACHE;
-				if (cached_td)
-					/* FIXME  stream case, several stopped rings */
-					xhci_dbg(xhci,
-						 "Move dq past stream %u URB %p instead of stream %u URB %p\n",
-						 td->urb->stream_id, td->urb,
-						 cached_td->urb->stream_id, cached_td->urb);
 				cached_td = td;
 				break;
 			}
@@ -1054,10 +1074,16 @@ static int xhci_invalidate_cancelled_tds(struct xhci_virt_ep *ep)
 	if (err) {
 		/* Failed to move past cached td, just set cached TDs to no-op */
 		list_for_each_entry_safe(td, tmp_td, &ep->cancelled_td_list, cancelled_td_list) {
-			if (td->cancel_status != TD_CLEARING_CACHE)
+			/*
+			 * Deferred TDs need to have the deq pointer set after the above command
+			 * completes, so if that failed we just give up on all of them (and
+			 * complain loudly since this could cause issues due to caching).
+			 */
+			if (td->cancel_status != TD_CLEARING_CACHE &&
+			    td->cancel_status != TD_CLEARING_CACHE_DEFERRED)
 				continue;
-			xhci_dbg(xhci, "Failed to clear cancelled cached URB %p, mark clear anyway\n",
-				 td->urb);
+			xhci_warn(xhci, "Failed to clear cancelled cached URB %p, mark clear anyway\n",
+				  td->urb);
 			td_to_noop(xhci, ring, td, false);
 			td->cancel_status = TD_CLEARED;
 		}
@@ -1154,6 +1180,15 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
 				break;
 			ep->ep_state &= ~EP_STOP_CMD_PENDING;
 			return;
+		case EP_STATE_STOPPED:
+			/*
+			 * NEC uPD720200 sometimes sets this state and fails with
+			 * Context Error while continuing to process TRBs.
+			 * Be conservative and trust EP_CTX_STATE on other chips.
+			 */
+			if (!(xhci->quirks & XHCI_NEC_HOST))
+				break;
+			fallthrough;
 		case EP_STATE_RUNNING:
 			/* Race, HW handled stop ep cmd before ep was running */
 			xhci_dbg(xhci, "Stop ep completion ctx error, ep is running\n");
@@ -1335,6 +1370,7 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id,
 	struct xhci_ep_ctx *ep_ctx;
 	struct xhci_slot_ctx *slot_ctx;
 	struct xhci_td *td, *tmp_td;
+	bool deferred = false;
 
 	ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
 	stream_id = TRB_TO_STREAM_ID(le32_to_cpu(trb->generic.field[2]));
@@ -1421,6 +1457,8 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id,
 			xhci_dbg(ep->xhci, "%s: Giveback cancelled URB %p TD\n",
 				 __func__, td->urb);
 			xhci_td_cleanup(ep->xhci, td, ep_ring, td->status);
+		} else if (td->cancel_status == TD_CLEARING_CACHE_DEFERRED) {
+			deferred = true;
 		} else {
 			xhci_dbg(ep->xhci, "%s: Keep cancelled URB %p TD as cancel_status is %d\n",
 				 __func__, td->urb, td->cancel_status);
@@ -1430,8 +1468,17 @@ cleanup:
 	ep->ep_state &= ~SET_DEQ_PENDING;
 	ep->queued_deq_seg = NULL;
 	ep->queued_deq_ptr = NULL;
-	/* Restart any rings with pending URBs */
-	ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
+
+	if (deferred) {
+		/* We have more streams to clear */
+		xhci_dbg(ep->xhci, "%s: Pending TDs to clear, continuing with invalidation\n",
+			 __func__);
+		xhci_invalidate_cancelled_tds(ep);
+	} else {
+		/* Restart any rings with pending URBs */
+		xhci_dbg(ep->xhci, "%s: All TDs cleared, ring doorbell\n", __func__);
+		ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
+	}
 }
 
 static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id,
@@ -1870,7 +1917,6 @@ static void handle_port_status(struct xhci_hcd *xhci,
 	u32 port_id;
 	u32 portsc, cmd_reg;
 	int max_ports;
-	int slot_id;
 	unsigned int hcd_portnum;
 	struct xhci_bus_state *bus_state;
 	bool bogus_port_status = false;
@@ -1922,9 +1968,8 @@ static void handle_port_status(struct xhci_hcd *xhci,
 
 	if (hcd->speed >= HCD_USB3 &&
 	    (portsc & PORT_PLS_MASK) == XDEV_INACTIVE) {
-		slot_id = xhci_find_slot_id_by_port(hcd, xhci, hcd_portnum + 1);
-		if (slot_id && xhci->devs[slot_id])
-			xhci->devs[slot_id]->flags |= VDEV_PORT_ERROR;
+		if (port->slot_id && xhci->devs[port->slot_id])
+			xhci->devs[port->slot_id]->flags |= VDEV_PORT_ERROR;
 	}
 
 	if ((portsc & PORT_PLC) && (portsc & PORT_PLS_MASK) == XDEV_RESUME) {
@@ -1982,9 +2027,8 @@ static void handle_port_status(struct xhci_hcd *xhci,
 		 * so the roothub behavior is consistent with external
 		 * USB 3.0 hub behavior.
 		 */
-		slot_id = xhci_find_slot_id_by_port(hcd, xhci, hcd_portnum + 1);
-		if (slot_id && xhci->devs[slot_id])
-			xhci_ring_device(xhci, slot_id);
+		if (port->slot_id && xhci->devs[port->slot_id])
+			xhci_ring_device(xhci, port->slot_id);
 		if (bus_state->port_remote_wakeup & (1 << hcd_portnum)) {
 			xhci_test_and_clear_bit(xhci, port, PORT_PLC);
 			usb_wakeup_notification(hcd->self.root_hub,
@@ -2387,8 +2431,7 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
 			break;
 		if (remaining) {
 			frame->status = short_framestatus;
-			if (xhci->quirks & XHCI_TRUST_TX_LENGTH)
-				sum_trbs_for_length = true;
+			sum_trbs_for_length = true;
 			break;
 		}
 		frame->status = 0;
@@ -2523,9 +2566,8 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
 		goto finish_td;
 	case COMP_STOPPED_LENGTH_INVALID:
 		/* stopped on ep trb with invalid length, exclude it */
-		ep_trb_len	= 0;
-		remaining	= 0;
-		break;
+		td->urb->actual_length = sum_trb_lengths(xhci, ep_ring, ep_trb);
+		goto finish_td;
 	case COMP_USB_TRANSACTION_ERROR:
 		if (xhci->quirks & XHCI_NO_SOFT_RETRY ||
 		    (ep->err_count++ > MAX_SOFT_RETRY) ||
@@ -2638,15 +2680,11 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 	 * transfer type
 	 */
 	case COMP_SUCCESS:
-		if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
-			break;
-		if (xhci->quirks & XHCI_TRUST_TX_LENGTH ||
-		    ep_ring->last_td_was_short)
+		if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
 			trb_comp_code = COMP_SHORT_PACKET;
-		else
-			xhci_warn_ratelimited(xhci,
-					      "WARN Successful completion on short TX for slot %u ep %u: needs XHCI_TRUST_TX_LENGTH quirk?\n",
-					      slot_id, ep_index);
+			xhci_dbg(xhci, "Successful completion on short TX for slot %u ep %u with last td short %d\n",
+				 slot_id, ep_index, ep_ring->last_td_was_short);
+		}
 		break;
 	case COMP_SHORT_PACKET:
 		break;
@@ -2816,7 +2854,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 			td_num--;
 
 		/* Is this a TRB in the currently executing TD? */
-		ep_seg = trb_in_td(xhci, ep_ring->deq_seg, ep_ring->dequeue,
+		ep_seg = trb_in_td(xhci, td->start_seg, td->first_trb,
 				td->last_trb, ep_trb_dma, false);
 
 		/*
@@ -2884,9 +2922,8 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 					"part of current TD ep_index %d "
 					"comp_code %u\n", ep_index,
 					trb_comp_code);
-				trb_in_td(xhci, ep_ring->deq_seg,
-					  ep_ring->dequeue, td->last_trb,
-					  ep_trb_dma, true);
+				trb_in_td(xhci, td->start_seg, td->first_trb,
+					  td->last_trb, ep_trb_dma, true);
 				return -ESHUTDOWN;
 			}
 		}
@@ -2962,32 +2999,18 @@ err_out:
 }
 
 /*
- * This function handles all OS-owned events on the event ring.  It may drop
+ * This function handles one OS-owned event on the event ring. It may drop
  * xhci->lock between event processing (e.g. to pass up port status changes).
- * Returns >0 for "possibly more events to process" (caller should call again),
- * otherwise 0 if done.  In future, <0 returns should indicate error code.
  */
-static int xhci_handle_event(struct xhci_hcd *xhci, struct xhci_interrupter *ir)
+static int xhci_handle_event_trb(struct xhci_hcd *xhci, struct xhci_interrupter *ir,
+				 union xhci_trb *event)
 {
-	union xhci_trb *event;
 	u32 trb_type;
 
-	/* Event ring hasn't been allocated yet. */
-	if (!ir || !ir->event_ring || !ir->event_ring->dequeue) {
-		xhci_err(xhci, "ERROR interrupter not ready\n");
-		return -ENOMEM;
-	}
-
-	event = ir->event_ring->dequeue;
-	/* Does the HC or OS own the TRB? */
-	if ((le32_to_cpu(event->event_cmd.flags) & TRB_CYCLE) !=
-	    ir->event_ring->cycle_state)
-		return 0;
-
 	trace_xhci_handle_event(ir->event_ring, &event->generic);
 
 	/*
-	 * Barrier between reading the TRB_CYCLE (valid) flag above and any
+	 * Barrier between reading the TRB_CYCLE (valid) flag before, and any
 	 * speculative reads of the event's flags/data below.
 	 */
 	rmb();
@@ -3017,15 +3040,11 @@ static int xhci_handle_event(struct xhci_hcd *xhci, struct xhci_interrupter *ir)
 	 * to make sure a watchdog timer didn't mark the host as non-responsive.
 	 */
 	if (xhci->xhc_state & XHCI_STATE_DYING) {
-		xhci_dbg(xhci, "xHCI host dying, returning from "
-				"event handler.\n");
-		return 0;
+		xhci_dbg(xhci, "xHCI host dying, returning from event handler.\n");
+		return -ENODEV;
 	}
 
-	/* Are there more items on the event ring?  Caller will call us again to
-	 * check.
-	 */
-	return 1;
+	return 0;
 }
 
 /*
@@ -3075,13 +3094,24 @@ static void xhci_clear_interrupt_pending(struct xhci_hcd *xhci,
 	}
 }
 
+/*
+ * Handle all OS-owned events on an interrupter event ring. It may drop
+ * and reaquire xhci->lock between event processing.
+ */
 static int xhci_handle_events(struct xhci_hcd *xhci, struct xhci_interrupter *ir)
 {
 	int event_loop = 0;
+	int err;
 	u64 temp;
 
 	xhci_clear_interrupt_pending(xhci, ir);
 
+	/* Event ring hasn't been allocated yet. */
+	if (!ir->event_ring || !ir->event_ring->dequeue) {
+		xhci_err(xhci, "ERROR interrupter event ring not ready\n");
+		return -ENOMEM;
+	}
+
 	if (xhci->xhc_state & XHCI_STATE_DYING ||
 	    xhci->xhc_state & XHCI_STATE_HALTED) {
 		xhci_dbg(xhci, "xHCI dying, ignoring interrupt. Shouldn't IRQs be disabled?\n");
@@ -3092,7 +3122,10 @@ static int xhci_handle_events(struct xhci_hcd *xhci, struct xhci_interrupter *ir
 		return -ENODEV;
 	}
 
-	while (xhci_handle_event(xhci, ir) > 0) {
+	/* Process all OS owned event TRBs on this event ring */
+	while (unhandled_event_trb(ir->event_ring)) {
+		err = xhci_handle_event_trb(xhci, ir, ir->event_ring->dequeue);
+
 		/*
 		 * If half a segment of events have been handled in one go then
 		 * update ERDP, and force isoc trbs to interrupt more often
@@ -3108,6 +3141,9 @@ static int xhci_handle_events(struct xhci_hcd *xhci, struct xhci_interrupter *ir
 
 		/* Update SW event ring dequeue pointer */
 		inc_deq(xhci, ir->event_ring);
+
+		if (err)
+			break;
 	}
 
 	xhci_update_erst_dequeue(xhci, ir, true);
diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h
index ac47b1c054..5762564b9d 100644
--- a/drivers/usb/host/xhci-trace.h
+++ b/drivers/usb/host/xhci-trace.h
@@ -172,8 +172,7 @@ DECLARE_EVENT_CLASS(xhci_log_free_virt_dev,
 		__field(void *, vdev)
 		__field(unsigned long long, out_ctx)
 		__field(unsigned long long, in_ctx)
-		__field(u8, fake_port)
-		__field(u8, real_port)
+		__field(int, slot_id)
 		__field(u16, current_mel)
 
 	),
@@ -181,13 +180,12 @@ DECLARE_EVENT_CLASS(xhci_log_free_virt_dev,
 		__entry->vdev = vdev;
 		__entry->in_ctx = (unsigned long long) vdev->in_ctx->dma;
 		__entry->out_ctx = (unsigned long long) vdev->out_ctx->dma;
-		__entry->fake_port = (u8) vdev->fake_port;
-		__entry->real_port = (u8) vdev->real_port;
+		__entry->slot_id = (int) vdev->slot_id;
 		__entry->current_mel = (u16) vdev->current_mel;
 		),
-	TP_printk("vdev %p ctx %llx | %llx fake_port %d real_port %d current_mel %d",
-		__entry->vdev, __entry->in_ctx, __entry->out_ctx,
-		__entry->fake_port, __entry->real_port, __entry->current_mel
+	TP_printk("vdev %p slot %d ctx %llx | %llx current_mel %d",
+		__entry->vdev, __entry->slot_id, __entry->in_ctx,
+		__entry->out_ctx, __entry->current_mel
 	)
 );
 
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index afccd58c9a..8579603eda 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -346,6 +346,23 @@ static int xhci_disable_interrupter(struct xhci_interrupter *ir)
 	return 0;
 }
 
+/* interrupt moderation interval imod_interval in nanoseconds */
+static int xhci_set_interrupter_moderation(struct xhci_interrupter *ir,
+					   u32 imod_interval)
+{
+	u32 imod;
+
+	if (!ir || !ir->ir_set || imod_interval > U16_MAX * 250)
+		return -EINVAL;
+
+	imod = readl(&ir->ir_set->irq_control);
+	imod &= ~ER_IRQ_INTERVAL_MASK;
+	imod |= (imod_interval / 250) & ER_IRQ_INTERVAL_MASK;
+	writel(imod, &ir->ir_set->irq_control);
+
+	return 0;
+}
+
 static void compliance_mode_recovery(struct timer_list *t)
 {
 	struct xhci_hcd *xhci;
@@ -528,7 +545,6 @@ static int xhci_run_finished(struct xhci_hcd *xhci)
  */
 int xhci_run(struct usb_hcd *hcd)
 {
-	u32 temp;
 	u64 temp_64;
 	int ret;
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
@@ -551,12 +567,7 @@ int xhci_run(struct usb_hcd *hcd)
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
 			"ERST deq = 64'h%0lx", (long unsigned int) temp_64);
 
-	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
-			"// Set the interrupt modulation register");
-	temp = readl(&ir->ir_set->irq_control);
-	temp &= ~ER_IRQ_INTERVAL_MASK;
-	temp |= (xhci->imod_interval / 250) & ER_IRQ_INTERVAL_MASK;
-	writel(temp, &ir->ir_set->irq_control);
+	xhci_set_interrupter_moderation(ir, xhci->imod_interval);
 
 	if (xhci->quirks & XHCI_NEC_HOST) {
 		struct xhci_command *command;
@@ -783,19 +794,7 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci)
 		seg = seg->next;
 	} while (seg != ring->deq_seg);
 
-	/* Reset the software enqueue and dequeue pointers */
-	ring->deq_seg = ring->first_seg;
-	ring->dequeue = ring->first_seg->trbs;
-	ring->enq_seg = ring->deq_seg;
-	ring->enqueue = ring->dequeue;
-
-	ring->num_trbs_free = ring->num_segs * (TRBS_PER_SEGMENT - 1) - 1;
-	/*
-	 * Ring is now zeroed, so the HW should look for change of ownership
-	 * when the cycle bit is set to 1.
-	 */
-	ring->cycle_state = 1;
-
+	xhci_initialize_ring_info(ring, 1);
 	/*
 	 * Reset the hardware dequeue pointer.
 	 * Yes, this will need to be re-written after resume, but we're paranoid
@@ -2264,7 +2263,7 @@ static int xhci_check_tt_bw_table(struct xhci_hcd *xhci,
 	struct xhci_tt_bw_info *tt_info;
 
 	/* Find the bandwidth table for the root port this TT is attached to. */
-	bw_table = &xhci->rh_bw[virt_dev->real_port - 1].bw_table;
+	bw_table = &xhci->rh_bw[virt_dev->rhub_port->hw_portnum].bw_table;
 	tt_info = virt_dev->tt_info;
 	/* If this TT already had active endpoints, the bandwidth for this TT
 	 * has already been added.  Removing all periodic endpoints (and thus
@@ -2382,7 +2381,7 @@ static int xhci_check_bw_table(struct xhci_hcd *xhci,
 	if (virt_dev->tt_info) {
 		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
 				"Recalculating BW for rootport %u",
-				virt_dev->real_port);
+				virt_dev->rhub_port->hw_portnum + 1);
 		if (xhci_check_tt_bw_table(xhci, virt_dev, old_active_eps)) {
 			xhci_warn(xhci, "Not enough bandwidth on HS bus for "
 					"newly activated TT.\n");
@@ -2395,7 +2394,7 @@ static int xhci_check_bw_table(struct xhci_hcd *xhci,
 	} else {
 		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
 				"Recalculating BW for rootport %u",
-				virt_dev->real_port);
+				virt_dev->rhub_port->hw_portnum + 1);
 	}
 
 	/* Add in how much bandwidth will be used for interval zero, or the
@@ -2492,14 +2491,12 @@ static int xhci_check_bw_table(struct xhci_hcd *xhci,
 		bw_used += overhead + packet_size;
 
 	if (!virt_dev->tt_info && virt_dev->udev->speed == USB_SPEED_HIGH) {
-		unsigned int port_index = virt_dev->real_port - 1;
-
 		/* OK, we're manipulating a HS device attached to a
 		 * root port bandwidth domain.  Include the number of active TTs
 		 * in the bandwidth used.
 		 */
 		bw_used += TT_HS_OVERHEAD *
-			xhci->rh_bw[port_index].num_active_tts;
+			xhci->rh_bw[virt_dev->rhub_port->hw_portnum].num_active_tts;
 	}
 
 	xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
@@ -2686,7 +2683,7 @@ void xhci_update_tt_active_eps(struct xhci_hcd *xhci,
 	if (!virt_dev->tt_info)
 		return;
 
-	rh_bw_info = &xhci->rh_bw[virt_dev->real_port - 1];
+	rh_bw_info = &xhci->rh_bw[virt_dev->rhub_port->hw_portnum];
 	if (old_active_eps == 0 &&
 				virt_dev->tt_info->active_eps != 0) {
 		rh_bw_info->num_active_tts += 1;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index bf05103aa6..1683d779e4 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -22,6 +22,9 @@
 #include	"xhci-ext-caps.h"
 #include "pci-quirks.h"
 
+#include "xhci-port.h"
+#include "xhci-caps.h"
+
 /* max buffer size for trace and debug messages */
 #define XHCI_MSG_MAX		500
 
@@ -62,90 +65,6 @@ struct xhci_cap_regs {
 	/* Reserved up to (CAPLENGTH - 0x1C) */
 };
 
-/* hc_capbase bitmasks */
-/* bits 7:0 - how long is the Capabilities register */
-#define HC_LENGTH(p)		XHCI_HC_LENGTH(p)
-/* bits 31:16	*/
-#define HC_VERSION(p)		(((p) >> 16) & 0xffff)
-
-/* HCSPARAMS1 - hcs_params1 - bitmasks */
-/* bits 0:7, Max Device Slots */
-#define HCS_MAX_SLOTS(p)	(((p) >> 0) & 0xff)
-#define HCS_SLOTS_MASK		0xff
-/* bits 8:18, Max Interrupters */
-#define HCS_MAX_INTRS(p)	(((p) >> 8) & 0x7ff)
-/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */
-#define HCS_MAX_PORTS(p)	(((p) >> 24) & 0x7f)
-
-/* HCSPARAMS2 - hcs_params2 - bitmasks */
-/* bits 0:3, frames or uframes that SW needs to queue transactions
- * ahead of the HW to meet periodic deadlines */
-#define HCS_IST(p)		(((p) >> 0) & 0xf)
-/* bits 4:7, max number of Event Ring segments */
-#define HCS_ERST_MAX(p)		(((p) >> 4) & 0xf)
-/* bits 21:25 Hi 5 bits of Scratchpad buffers SW must allocate for the HW */
-/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
-/* bits 27:31 Lo 5 bits of Scratchpad buffers SW must allocate for the HW */
-#define HCS_MAX_SCRATCHPAD(p)   ((((p) >> 16) & 0x3e0) | (((p) >> 27) & 0x1f))
-
-/* HCSPARAMS3 - hcs_params3 - bitmasks */
-/* bits 0:7, Max U1 to U0 latency for the roothub ports */
-#define HCS_U1_LATENCY(p)	(((p) >> 0) & 0xff)
-/* bits 16:31, Max U2 to U0 latency for the roothub ports */
-#define HCS_U2_LATENCY(p)	(((p) >> 16) & 0xffff)
-
-/* HCCPARAMS - hcc_params - bitmasks */
-/* true: HC can use 64-bit address pointers */
-#define HCC_64BIT_ADDR(p)	((p) & (1 << 0))
-/* true: HC can do bandwidth negotiation */
-#define HCC_BANDWIDTH_NEG(p)	((p) & (1 << 1))
-/* true: HC uses 64-byte Device Context structures
- * FIXME 64-byte context structures aren't supported yet.
- */
-#define HCC_64BYTE_CONTEXT(p)	((p) & (1 << 2))
-/* true: HC has port power switches */
-#define HCC_PPC(p)		((p) & (1 << 3))
-/* true: HC has port indicators */
-#define HCS_INDICATOR(p)	((p) & (1 << 4))
-/* true: HC has Light HC Reset Capability */
-#define HCC_LIGHT_RESET(p)	((p) & (1 << 5))
-/* true: HC supports latency tolerance messaging */
-#define HCC_LTC(p)		((p) & (1 << 6))
-/* true: no secondary Stream ID Support */
-#define HCC_NSS(p)		((p) & (1 << 7))
-/* true: HC supports Stopped - Short Packet */
-#define HCC_SPC(p)		((p) & (1 << 9))
-/* true: HC has Contiguous Frame ID Capability */
-#define HCC_CFC(p)		((p) & (1 << 11))
-/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */
-#define HCC_MAX_PSA(p)		(1 << ((((p) >> 12) & 0xf) + 1))
-/* Extended Capabilities pointer from PCI base - section 5.3.6 */
-#define HCC_EXT_CAPS(p)		XHCI_HCC_EXT_CAPS(p)
-
-#define CTX_SIZE(_hcc)		(HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
-
-/* db_off bitmask - bits 0:1 reserved */
-#define	DBOFF_MASK	(~0x3)
-
-/* run_regs_off bitmask - bits 0:4 reserved */
-#define	RTSOFF_MASK	(~0x1f)
-
-/* HCCPARAMS2 - hcc_params2 - bitmasks */
-/* true: HC supports U3 entry Capability */
-#define	HCC2_U3C(p)		((p) & (1 << 0))
-/* true: HC supports Configure endpoint command Max exit latency too large */
-#define	HCC2_CMC(p)		((p) & (1 << 1))
-/* true: HC supports Force Save context Capability */
-#define	HCC2_FSC(p)		((p) & (1 << 2))
-/* true: HC supports Compliance Transition Capability */
-#define	HCC2_CTC(p)		((p) & (1 << 3))
-/* true: HC support Large ESIT payload Capability > 48k */
-#define	HCC2_LEC(p)		((p) & (1 << 4))
-/* true: HC support Configuration Information Capability */
-#define	HCC2_CIC(p)		((p) & (1 << 5))
-/* true: HC support Extended TBC Capability, Isoc burst count > 65535 */
-#define	HCC2_ETC(p)		((p) & (1 << 6))
-
 /* Number of registers per port */
 #define	NUM_PORT_REGS	4
 
@@ -291,181 +210,6 @@ struct xhci_op_regs {
 #define CONFIG_CIE		(1 << 9)
 /* bits 10:31 - reserved and should be preserved */
 
-/* PORTSC - Port Status and Control Register - port_status_base bitmasks */
-/* true: device connected */
-#define PORT_CONNECT	(1 << 0)
-/* true: port enabled */
-#define PORT_PE		(1 << 1)
-/* bit 2 reserved and zeroed */
-/* true: port has an over-current condition */
-#define PORT_OC		(1 << 3)
-/* true: port reset signaling asserted */
-#define PORT_RESET	(1 << 4)
-/* Port Link State - bits 5:8
- * A read gives the current link PM state of the port,
- * a write with Link State Write Strobe set sets the link state.
- */
-#define PORT_PLS_MASK	(0xf << 5)
-#define XDEV_U0		(0x0 << 5)
-#define XDEV_U1		(0x1 << 5)
-#define XDEV_U2		(0x2 << 5)
-#define XDEV_U3		(0x3 << 5)
-#define XDEV_DISABLED	(0x4 << 5)
-#define XDEV_RXDETECT	(0x5 << 5)
-#define XDEV_INACTIVE	(0x6 << 5)
-#define XDEV_POLLING	(0x7 << 5)
-#define XDEV_RECOVERY	(0x8 << 5)
-#define XDEV_HOT_RESET	(0x9 << 5)
-#define XDEV_COMP_MODE	(0xa << 5)
-#define XDEV_TEST_MODE	(0xb << 5)
-#define XDEV_RESUME	(0xf << 5)
-
-/* true: port has power (see HCC_PPC) */
-#define PORT_POWER	(1 << 9)
-/* bits 10:13 indicate device speed:
- * 0 - undefined speed - port hasn't be initialized by a reset yet
- * 1 - full speed
- * 2 - low speed
- * 3 - high speed
- * 4 - super speed
- * 5-15 reserved
- */
-#define DEV_SPEED_MASK		(0xf << 10)
-#define	XDEV_FS			(0x1 << 10)
-#define	XDEV_LS			(0x2 << 10)
-#define	XDEV_HS			(0x3 << 10)
-#define	XDEV_SS			(0x4 << 10)
-#define	XDEV_SSP		(0x5 << 10)
-#define DEV_UNDEFSPEED(p)	(((p) & DEV_SPEED_MASK) == (0x0<<10))
-#define DEV_FULLSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_FS)
-#define DEV_LOWSPEED(p)		(((p) & DEV_SPEED_MASK) == XDEV_LS)
-#define DEV_HIGHSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_HS)
-#define DEV_SUPERSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_SS)
-#define DEV_SUPERSPEEDPLUS(p)	(((p) & DEV_SPEED_MASK) == XDEV_SSP)
-#define DEV_SUPERSPEED_ANY(p)	(((p) & DEV_SPEED_MASK) >= XDEV_SS)
-#define DEV_PORT_SPEED(p)	(((p) >> 10) & 0x0f)
-
-/* Bits 20:23 in the Slot Context are the speed for the device */
-#define	SLOT_SPEED_FS		(XDEV_FS << 10)
-#define	SLOT_SPEED_LS		(XDEV_LS << 10)
-#define	SLOT_SPEED_HS		(XDEV_HS << 10)
-#define	SLOT_SPEED_SS		(XDEV_SS << 10)
-#define	SLOT_SPEED_SSP		(XDEV_SSP << 10)
-/* Port Indicator Control */
-#define PORT_LED_OFF	(0 << 14)
-#define PORT_LED_AMBER	(1 << 14)
-#define PORT_LED_GREEN	(2 << 14)
-#define PORT_LED_MASK	(3 << 14)
-/* Port Link State Write Strobe - set this when changing link state */
-#define PORT_LINK_STROBE	(1 << 16)
-/* true: connect status change */
-#define PORT_CSC	(1 << 17)
-/* true: port enable change */
-#define PORT_PEC	(1 << 18)
-/* true: warm reset for a USB 3.0 device is done.  A "hot" reset puts the port
- * into an enabled state, and the device into the default state.  A "warm" reset
- * also resets the link, forcing the device through the link training sequence.
- * SW can also look at the Port Reset register to see when warm reset is done.
- */
-#define PORT_WRC	(1 << 19)
-/* true: over-current change */
-#define PORT_OCC	(1 << 20)
-/* true: reset change - 1 to 0 transition of PORT_RESET */
-#define PORT_RC		(1 << 21)
-/* port link status change - set on some port link state transitions:
- *  Transition				Reason
- *  ------------------------------------------------------------------------------
- *  - U3 to Resume			Wakeup signaling from a device
- *  - Resume to Recovery to U0		USB 3.0 device resume
- *  - Resume to U0			USB 2.0 device resume
- *  - U3 to Recovery to U0		Software resume of USB 3.0 device complete
- *  - U3 to U0				Software resume of USB 2.0 device complete
- *  - U2 to U0				L1 resume of USB 2.1 device complete
- *  - U0 to U0 (???)			L1 entry rejection by USB 2.1 device
- *  - U0 to disabled			L1 entry error with USB 2.1 device
- *  - Any state to inactive		Error on USB 3.0 port
- */
-#define PORT_PLC	(1 << 22)
-/* port configure error change - port failed to configure its link partner */
-#define PORT_CEC	(1 << 23)
-#define PORT_CHANGE_MASK	(PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
-				 PORT_RC | PORT_PLC | PORT_CEC)
-
-
-/* Cold Attach Status - xHC can set this bit to report device attached during
- * Sx state. Warm port reset should be perfomed to clear this bit and move port
- * to connected state.
- */
-#define PORT_CAS	(1 << 24)
-/* wake on connect (enable) */
-#define PORT_WKCONN_E	(1 << 25)
-/* wake on disconnect (enable) */
-#define PORT_WKDISC_E	(1 << 26)
-/* wake on over-current (enable) */
-#define PORT_WKOC_E	(1 << 27)
-/* bits 28:29 reserved */
-/* true: device is non-removable - for USB 3.0 roothub emulation */
-#define PORT_DEV_REMOVE	(1 << 30)
-/* Initiate a warm port reset - complete when PORT_WRC is '1' */
-#define PORT_WR		(1 << 31)
-
-/* We mark duplicate entries with -1 */
-#define DUPLICATE_ENTRY ((u8)(-1))
-
-/* Port Power Management Status and Control - port_power_base bitmasks */
-/* Inactivity timer value for transitions into U1, in microseconds.
- * Timeout can be up to 127us.  0xFF means an infinite timeout.
- */
-#define PORT_U1_TIMEOUT(p)	((p) & 0xff)
-#define PORT_U1_TIMEOUT_MASK	0xff
-/* Inactivity timer value for transitions into U2 */
-#define PORT_U2_TIMEOUT(p)	(((p) & 0xff) << 8)
-#define PORT_U2_TIMEOUT_MASK	(0xff << 8)
-/* Bits 24:31 for port testing */
-
-/* USB2 Protocol PORTSPMSC */
-#define	PORT_L1S_MASK		7
-#define	PORT_L1S_SUCCESS	1
-#define	PORT_RWE		(1 << 3)
-#define	PORT_HIRD(p)		(((p) & 0xf) << 4)
-#define	PORT_HIRD_MASK		(0xf << 4)
-#define	PORT_L1DS_MASK		(0xff << 8)
-#define	PORT_L1DS(p)		(((p) & 0xff) << 8)
-#define	PORT_HLE		(1 << 16)
-#define PORT_TEST_MODE_SHIFT	28
-
-/* USB3 Protocol PORTLI  Port Link Information */
-#define PORT_RX_LANES(p)	(((p) >> 16) & 0xf)
-#define PORT_TX_LANES(p)	(((p) >> 20) & 0xf)
-
-/* USB2 Protocol PORTHLPMC */
-#define PORT_HIRDM(p)((p) & 3)
-#define PORT_L1_TIMEOUT(p)(((p) & 0xff) << 2)
-#define PORT_BESLD(p)(((p) & 0xf) << 10)
-
-/* use 512 microseconds as USB2 LPM L1 default timeout. */
-#define XHCI_L1_TIMEOUT		512
-
-/* Set default HIRD/BESL value to 4 (350/400us) for USB2 L1 LPM resume latency.
- * Safe to use with mixed HIRD and BESL systems (host and device) and is used
- * by other operating systems.
- *
- * XHCI 1.0 errata 8/14/12 Table 13 notes:
- * "Software should choose xHC BESL/BESLD field values that do not violate a
- * device's resume latency requirements,
- * e.g. not program values > '4' if BLC = '1' and a HIRD device is attached,
- * or not program values < '4' if BLC = '0' and a BESL device is attached.
- */
-#define XHCI_DEFAULT_BESL	4
-
-/*
- * USB3 specification define a 360ms tPollingLFPSTiemout for USB3 ports
- * to complete link training. usually link trainig completes much faster
- * so check status 10 times with 36ms sleep in places we need to wait for
- * polling to complete.
- */
-#define XHCI_PORT_POLLING_LFPS_TIME  36
-
 /**
  * struct xhci_intr_reg - Interrupt Register Set
  * @irq_pending:	IMAN - Interrupt Management Register.  Used to enable
@@ -995,8 +739,7 @@ struct xhci_virt_device {
 	/* Used for addressing devices and configuration changes */
 	struct xhci_container_ctx       *in_ctx;
 	struct xhci_virt_ep		eps[EP_CTX_PER_DEV];
-	u8				fake_port;
-	u8				real_port;
+	struct xhci_port		*rhub_port;
 	struct xhci_interval_bw_table	*bw_table;
 	struct xhci_tt_bw_info		*tt_info;
 	/*
@@ -1533,6 +1276,7 @@ enum xhci_cancelled_td_status {
 	TD_DIRTY = 0,
 	TD_HALTED,
 	TD_CLEARING_CACHE,
+	TD_CLEARING_CACHE_DEFERRED,
 	TD_CLEARED,
 };
 
@@ -1649,8 +1393,8 @@ struct urb_priv {
 	struct	xhci_td	td[] __counted_by(num_tds);
 };
 
-/* Reasonable limit for number of Event Ring segments (spec allows 32k) */
-#define	ERST_MAX_SEGS	2
+/* Number of Event Ring segments to allocate, when amount is not specified. (spec allows 32k) */
+#define	ERST_DEFAULT_SEGS	2
 /* Poll every 60 seconds */
 #define	POLL_TIMEOUT	60
 /* Stop endpoint command timeout (secs) for URB cancellation watchdog timer */
@@ -1719,6 +1463,8 @@ struct xhci_port {
 	unsigned int		lpm_incapable:1;
 	unsigned long		resume_timestamp;
 	bool			rexit_active;
+	/* Slot ID is the index of the device directly connected to the port */
+	int			slot_id;
 	struct completion	rexit_done;
 	struct completion	u3exit_done;
 };
@@ -1844,7 +1590,7 @@ struct xhci_hcd {
 #define XHCI_RESET_ON_RESUME	BIT_ULL(7)
 #define	XHCI_SW_BW_CHECKING	BIT_ULL(8)
 #define XHCI_AMD_0x96_HOST	BIT_ULL(9)
-#define XHCI_TRUST_TX_LENGTH	BIT_ULL(10)
+#define XHCI_TRUST_TX_LENGTH	BIT_ULL(10) /* Deprecated */
 #define XHCI_LPM_SUPPORT	BIT_ULL(11)
 #define XHCI_INTEL_HOST		BIT_ULL(12)
 #define XHCI_SPURIOUS_REBOOT	BIT_ULL(13)
@@ -1984,8 +1730,6 @@ static inline bool xhci_has_one_roothub(struct xhci_hcd *xhci)
 	dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
 #define xhci_warn(xhci, fmt, args...) \
 	dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
-#define xhci_warn_ratelimited(xhci, fmt, args...) \
-	dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
 #define xhci_info(xhci, fmt, args...) \
 	dev_info(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
 
@@ -2088,7 +1832,7 @@ struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
 void xhci_free_container_ctx(struct xhci_hcd *xhci,
 		struct xhci_container_ctx *ctx);
 struct xhci_interrupter *
-xhci_create_secondary_interrupter(struct usb_hcd *hcd, int num_seg);
+xhci_create_secondary_interrupter(struct usb_hcd *hcd, unsigned int segs);
 void xhci_remove_secondary_interrupter(struct usb_hcd
 				       *hcd, struct xhci_interrupter *ir);
 
@@ -2201,8 +1945,6 @@ unsigned long xhci_get_resuming_ports(struct usb_hcd *hcd);
 #endif	/* CONFIG_PM */
 
 u32 xhci_port_state_to_neutral(u32 state);
-int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
-		u16 port);
 void xhci_ring_device(struct xhci_hcd *xhci, int slot_id);
 
 /* xHCI contexts */