Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

10 files changed, 5820 insertions, 0 deletions

diff --git a/drivers/usb/isp1760/Kconfig b/drivers/usb/isp1760/Kconfig
new file mode 100644
index 0000000000..2ed2b73291
--- /dev/null
+++ b/drivers/usb/isp1760/Kconfig
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config USB_ISP1760
+	tristate "NXP ISP 1760/1761/1763 support"
+	depends on USB || USB_GADGET
+	select REGMAP_MMIO
+	help
+	  Say Y or M here if your system as an ISP1760/1763 USB host controller
+	  or an ISP1761 USB dual-role controller.
+
+	  This driver does not support isochronous transfers or OTG.
+	  This USB controller is usually attached to a non-DMA-Master
+	  capable bus. NXP's eval kit brings this chip on PCI card
+	  where the chip itself is behind a PLB to simulate such
+	  a bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called isp1760.
+
+config USB_ISP1760_HCD
+	bool
+
+config USB_ISP1761_UDC
+	bool
+
+if USB_ISP1760
+
+choice
+	bool "ISP1760 Mode Selection"
+	default USB_ISP1760_DUAL_ROLE if (USB && USB_GADGET)
+	default USB_ISP1760_HOST_ROLE if (USB && !USB_GADGET)
+	default USB_ISP1760_GADGET_ROLE if (!USB && USB_GADGET)
+
+config USB_ISP1760_HOST_ROLE
+	bool "Host only mode"
+	depends on USB=y || USB=USB_ISP1760
+	select USB_ISP1760_HCD
+	help
+	  Select this if you want to use the ISP1760 in host mode only. The
+	  gadget function will be disabled.
+
+config USB_ISP1760_GADGET_ROLE
+	bool "Gadget only mode"
+	depends on USB_GADGET=y || USB_GADGET=USB_ISP1760
+	select USB_ISP1761_UDC
+	help
+	  Select this if you want to use the ISP1760 in peripheral mode only.
+	  The host function will be disabled.
+
+config USB_ISP1760_DUAL_ROLE
+	bool "Dual Role mode"
+	depends on USB=y || USB=USB_ISP1760
+	depends on USB_GADGET=y || USB_GADGET=USB_ISP1760
+	select USB_ISP1760_HCD
+	select USB_ISP1761_UDC
+	help
+	  Select this if you want to use the ISP1760 in both host and
+	  peripheral modes.
+
+endchoice
+
+endif
diff --git a/drivers/usb/isp1760/Makefile b/drivers/usb/isp1760/Makefile
new file mode 100644
index 0000000000..9bb09e8290
--- /dev/null
+++ b/drivers/usb/isp1760/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+isp1760-y := isp1760-core.o isp1760-if.o
+isp1760-$(CONFIG_USB_ISP1760_HCD) += isp1760-hcd.o
+isp1760-$(CONFIG_USB_ISP1761_UDC) += isp1760-udc.o
+
+obj-$(CONFIG_USB_ISP1760)	+= isp1760.o
diff --git a/drivers/usb/isp1760/isp1760-core.c b/drivers/usb/isp1760/isp1760-core.c
new file mode 100644
index 0000000000..af88f4fe00
--- /dev/null
+++ b/drivers/usb/isp1760/isp1760-core.c
@@ -0,0 +1,607 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the NXP ISP1760 chip
+ *
+ * Copyright 2021 Linaro, Rui Miguel Silva
+ * Copyright 2014 Laurent Pinchart
+ * Copyright 2007 Sebastian Siewior
+ *
+ * Contacts:
+ *	Sebastian Siewior <bigeasy@linutronix.de>
+ *	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	Rui Miguel Silva <rui.silva@linaro.org>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include "isp1760-core.h"
+#include "isp1760-hcd.h"
+#include "isp1760-regs.h"
+#include "isp1760-udc.h"
+
+static int isp1760_init_core(struct isp1760_device *isp)
+{
+	struct isp1760_hcd *hcd = &isp->hcd;
+	struct isp1760_udc *udc = &isp->udc;
+	u32 otg_ctrl;
+
+	/* Low-level chip reset */
+	if (isp->rst_gpio) {
+		gpiod_set_value_cansleep(isp->rst_gpio, 1);
+		msleep(50);
+		gpiod_set_value_cansleep(isp->rst_gpio, 0);
+	}
+
+	/*
+	 * Reset the host controller, including the CPU interface
+	 * configuration.
+	 */
+	isp1760_field_set(hcd->fields, SW_RESET_RESET_ALL);
+	msleep(100);
+
+	/* Setup HW Mode Control: This assumes a level active-low interrupt */
+	if ((isp->devflags & ISP1760_FLAG_ANALOG_OC) && hcd->is_isp1763) {
+		dev_err(isp->dev, "isp1763 analog overcurrent not available\n");
+		return -EINVAL;
+	}
+
+	if (isp->devflags & ISP1760_FLAG_BUS_WIDTH_16)
+		isp1760_field_clear(hcd->fields, HW_DATA_BUS_WIDTH);
+	if (isp->devflags & ISP1760_FLAG_BUS_WIDTH_8)
+		isp1760_field_set(hcd->fields, HW_DATA_BUS_WIDTH);
+	if (isp->devflags & ISP1760_FLAG_ANALOG_OC)
+		isp1760_field_set(hcd->fields, HW_ANA_DIGI_OC);
+	if (isp->devflags & ISP1760_FLAG_DACK_POL_HIGH)
+		isp1760_field_set(hcd->fields, HW_DACK_POL_HIGH);
+	if (isp->devflags & ISP1760_FLAG_DREQ_POL_HIGH)
+		isp1760_field_set(hcd->fields, HW_DREQ_POL_HIGH);
+	if (isp->devflags & ISP1760_FLAG_INTR_POL_HIGH)
+		isp1760_field_set(hcd->fields, HW_INTR_HIGH_ACT);
+	if (isp->devflags & ISP1760_FLAG_INTR_EDGE_TRIG)
+		isp1760_field_set(hcd->fields, HW_INTR_EDGE_TRIG);
+
+	/*
+	 * The ISP1761 has a dedicated DC IRQ line but supports sharing the HC
+	 * IRQ line for both the host and device controllers. Hardcode IRQ
+	 * sharing for now and disable the DC interrupts globally to avoid
+	 * spurious interrupts during HCD registration.
+	 */
+	if (isp->devflags & ISP1760_FLAG_ISP1761) {
+		isp1760_reg_write(udc->regs, ISP176x_DC_MODE, 0);
+		isp1760_field_set(hcd->fields, HW_COMN_IRQ);
+	}
+
+	/*
+	 * PORT 1 Control register of the ISP1760 is the OTG control register
+	 * on ISP1761.
+	 *
+	 * TODO: Really support OTG. For now we configure port 1 in device mode
+	 */
+	if (isp->devflags & ISP1760_FLAG_ISP1761) {
+		if (isp->devflags & ISP1760_FLAG_PERIPHERAL_EN) {
+			otg_ctrl = (ISP176x_HW_DM_PULLDOWN_CLEAR |
+				    ISP176x_HW_DP_PULLDOWN_CLEAR |
+				    ISP176x_HW_OTG_DISABLE);
+		} else {
+			otg_ctrl = (ISP176x_HW_SW_SEL_HC_DC_CLEAR |
+				    ISP176x_HW_VBUS_DRV |
+				    ISP176x_HW_SEL_CP_EXT);
+		}
+		isp1760_reg_write(hcd->regs, ISP176x_HC_OTG_CTRL, otg_ctrl);
+	}
+
+	dev_info(isp->dev, "%s bus width: %u, oc: %s\n",
+		 hcd->is_isp1763 ? "isp1763" : "isp1760",
+		 isp->devflags & ISP1760_FLAG_BUS_WIDTH_8 ? 8 :
+		 isp->devflags & ISP1760_FLAG_BUS_WIDTH_16 ? 16 : 32,
+		 hcd->is_isp1763 ? "not available" :
+		 isp->devflags & ISP1760_FLAG_ANALOG_OC ? "analog" : "digital");
+
+	return 0;
+}
+
+void isp1760_set_pullup(struct isp1760_device *isp, bool enable)
+{
+	struct isp1760_udc *udc = &isp->udc;
+
+	if (enable)
+		isp1760_field_set(udc->fields, HW_DP_PULLUP);
+	else
+		isp1760_field_set(udc->fields, HW_DP_PULLUP_CLEAR);
+}
+
+/*
+ * ISP1760/61:
+ *
+ * 60kb divided in:
+ * - 32 blocks @ 256  bytes
+ * - 20 blocks @ 1024 bytes
+ * -  4 blocks @ 8192 bytes
+ */
+static const struct isp1760_memory_layout isp176x_memory_conf = {
+	.blocks[0]		= 32,
+	.blocks_size[0]		= 256,
+	.blocks[1]		= 20,
+	.blocks_size[1]		= 1024,
+	.blocks[2]		= 4,
+	.blocks_size[2]		= 8192,
+
+	.slot_num		= 32,
+	.payload_blocks		= 32 + 20 + 4,
+	.payload_area_size	= 0xf000,
+};
+
+/*
+ * ISP1763:
+ *
+ * 20kb divided in:
+ * - 8 blocks @ 256  bytes
+ * - 2 blocks @ 1024 bytes
+ * - 4 blocks @ 4096 bytes
+ */
+static const struct isp1760_memory_layout isp1763_memory_conf = {
+	.blocks[0]		= 8,
+	.blocks_size[0]		= 256,
+	.blocks[1]		= 2,
+	.blocks_size[1]		= 1024,
+	.blocks[2]		= 4,
+	.blocks_size[2]		= 4096,
+
+	.slot_num		= 16,
+	.payload_blocks		= 8 + 2 + 4,
+	.payload_area_size	= 0x5000,
+};
+
+static const struct regmap_range isp176x_hc_volatile_ranges[] = {
+	regmap_reg_range(ISP176x_HC_USBCMD, ISP176x_HC_ATL_PTD_LASTPTD),
+	regmap_reg_range(ISP176x_HC_BUFFER_STATUS, ISP176x_HC_MEMORY),
+	regmap_reg_range(ISP176x_HC_INTERRUPT, ISP176x_HC_OTG_CTRL_CLEAR),
+};
+
+static const struct regmap_access_table isp176x_hc_volatile_table = {
+	.yes_ranges	= isp176x_hc_volatile_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(isp176x_hc_volatile_ranges),
+};
+
+static const struct regmap_config isp1760_hc_regmap_conf = {
+	.name = "isp1760-hc",
+	.reg_bits = 16,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.fast_io = true,
+	.max_register = ISP176x_HC_OTG_CTRL_CLEAR,
+	.volatile_table = &isp176x_hc_volatile_table,
+};
+
+static const struct reg_field isp1760_hc_reg_fields[] = {
+	[HCS_PPC]		= REG_FIELD(ISP176x_HC_HCSPARAMS, 4, 4),
+	[HCS_N_PORTS]		= REG_FIELD(ISP176x_HC_HCSPARAMS, 0, 3),
+	[HCC_ISOC_CACHE]	= REG_FIELD(ISP176x_HC_HCCPARAMS, 7, 7),
+	[HCC_ISOC_THRES]	= REG_FIELD(ISP176x_HC_HCCPARAMS, 4, 6),
+	[CMD_LRESET]		= REG_FIELD(ISP176x_HC_USBCMD, 7, 7),
+	[CMD_RESET]		= REG_FIELD(ISP176x_HC_USBCMD, 1, 1),
+	[CMD_RUN]		= REG_FIELD(ISP176x_HC_USBCMD, 0, 0),
+	[STS_PCD]		= REG_FIELD(ISP176x_HC_USBSTS, 2, 2),
+	[HC_FRINDEX]		= REG_FIELD(ISP176x_HC_FRINDEX, 0, 13),
+	[FLAG_CF]		= REG_FIELD(ISP176x_HC_CONFIGFLAG, 0, 0),
+	[HC_ISO_PTD_DONEMAP]	= REG_FIELD(ISP176x_HC_ISO_PTD_DONEMAP, 0, 31),
+	[HC_ISO_PTD_SKIPMAP]	= REG_FIELD(ISP176x_HC_ISO_PTD_SKIPMAP, 0, 31),
+	[HC_ISO_PTD_LASTPTD]	= REG_FIELD(ISP176x_HC_ISO_PTD_LASTPTD, 0, 31),
+	[HC_INT_PTD_DONEMAP]	= REG_FIELD(ISP176x_HC_INT_PTD_DONEMAP, 0, 31),
+	[HC_INT_PTD_SKIPMAP]	= REG_FIELD(ISP176x_HC_INT_PTD_SKIPMAP, 0, 31),
+	[HC_INT_PTD_LASTPTD]	= REG_FIELD(ISP176x_HC_INT_PTD_LASTPTD, 0, 31),
+	[HC_ATL_PTD_DONEMAP]	= REG_FIELD(ISP176x_HC_ATL_PTD_DONEMAP, 0, 31),
+	[HC_ATL_PTD_SKIPMAP]	= REG_FIELD(ISP176x_HC_ATL_PTD_SKIPMAP, 0, 31),
+	[HC_ATL_PTD_LASTPTD]	= REG_FIELD(ISP176x_HC_ATL_PTD_LASTPTD, 0, 31),
+	[PORT_OWNER]		= REG_FIELD(ISP176x_HC_PORTSC1, 13, 13),
+	[PORT_POWER]		= REG_FIELD(ISP176x_HC_PORTSC1, 12, 12),
+	[PORT_LSTATUS]		= REG_FIELD(ISP176x_HC_PORTSC1, 10, 11),
+	[PORT_RESET]		= REG_FIELD(ISP176x_HC_PORTSC1, 8, 8),
+	[PORT_SUSPEND]		= REG_FIELD(ISP176x_HC_PORTSC1, 7, 7),
+	[PORT_RESUME]		= REG_FIELD(ISP176x_HC_PORTSC1, 6, 6),
+	[PORT_PE]		= REG_FIELD(ISP176x_HC_PORTSC1, 2, 2),
+	[PORT_CSC]		= REG_FIELD(ISP176x_HC_PORTSC1, 1, 1),
+	[PORT_CONNECT]		= REG_FIELD(ISP176x_HC_PORTSC1, 0, 0),
+	[ALL_ATX_RESET]		= REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 31, 31),
+	[HW_ANA_DIGI_OC]	= REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 15, 15),
+	[HW_COMN_IRQ]		= REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 10, 10),
+	[HW_DATA_BUS_WIDTH]	= REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 8, 8),
+	[HW_DACK_POL_HIGH]	= REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 6, 6),
+	[HW_DREQ_POL_HIGH]	= REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 5, 5),
+	[HW_INTR_HIGH_ACT]	= REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 2, 2),
+	[HW_INTR_EDGE_TRIG]	= REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 1, 1),
+	[HW_GLOBAL_INTR_EN]	= REG_FIELD(ISP176x_HC_HW_MODE_CTRL, 0, 0),
+	[HC_CHIP_REV]		= REG_FIELD(ISP176x_HC_CHIP_ID, 16, 31),
+	[HC_CHIP_ID_HIGH]	= REG_FIELD(ISP176x_HC_CHIP_ID, 8, 15),
+	[HC_CHIP_ID_LOW]	= REG_FIELD(ISP176x_HC_CHIP_ID, 0, 7),
+	[HC_SCRATCH]		= REG_FIELD(ISP176x_HC_SCRATCH, 0, 31),
+	[SW_RESET_RESET_ALL]	= REG_FIELD(ISP176x_HC_RESET, 0, 0),
+	[ISO_BUF_FILL]		= REG_FIELD(ISP176x_HC_BUFFER_STATUS, 2, 2),
+	[INT_BUF_FILL]		= REG_FIELD(ISP176x_HC_BUFFER_STATUS, 1, 1),
+	[ATL_BUF_FILL]		= REG_FIELD(ISP176x_HC_BUFFER_STATUS, 0, 0),
+	[MEM_BANK_SEL]		= REG_FIELD(ISP176x_HC_MEMORY, 16, 17),
+	[MEM_START_ADDR]	= REG_FIELD(ISP176x_HC_MEMORY, 0, 15),
+	[HC_INTERRUPT]		= REG_FIELD(ISP176x_HC_INTERRUPT, 0, 9),
+	[HC_ATL_IRQ_ENABLE]	= REG_FIELD(ISP176x_HC_INTERRUPT_ENABLE, 8, 8),
+	[HC_INT_IRQ_ENABLE]	= REG_FIELD(ISP176x_HC_INTERRUPT_ENABLE, 7, 7),
+	[HC_ISO_IRQ_MASK_OR]	= REG_FIELD(ISP176x_HC_ISO_IRQ_MASK_OR, 0, 31),
+	[HC_INT_IRQ_MASK_OR]	= REG_FIELD(ISP176x_HC_INT_IRQ_MASK_OR, 0, 31),
+	[HC_ATL_IRQ_MASK_OR]	= REG_FIELD(ISP176x_HC_ATL_IRQ_MASK_OR, 0, 31),
+	[HC_ISO_IRQ_MASK_AND]	= REG_FIELD(ISP176x_HC_ISO_IRQ_MASK_AND, 0, 31),
+	[HC_INT_IRQ_MASK_AND]	= REG_FIELD(ISP176x_HC_INT_IRQ_MASK_AND, 0, 31),
+	[HC_ATL_IRQ_MASK_AND]	= REG_FIELD(ISP176x_HC_ATL_IRQ_MASK_AND, 0, 31),
+	[HW_OTG_DISABLE_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 26, 26),
+	[HW_SW_SEL_HC_DC_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 23, 23),
+	[HW_VBUS_DRV_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 20, 20),
+	[HW_SEL_CP_EXT_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 19, 19),
+	[HW_DM_PULLDOWN_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 18, 18),
+	[HW_DP_PULLDOWN_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 17, 17),
+	[HW_DP_PULLUP_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 16, 16),
+	[HW_OTG_DISABLE]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 10, 10),
+	[HW_SW_SEL_HC_DC]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 7, 7),
+	[HW_VBUS_DRV]		= REG_FIELD(ISP176x_HC_OTG_CTRL, 4, 4),
+	[HW_SEL_CP_EXT]		= REG_FIELD(ISP176x_HC_OTG_CTRL, 3, 3),
+	[HW_DM_PULLDOWN]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 2, 2),
+	[HW_DP_PULLDOWN]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 1, 1),
+	[HW_DP_PULLUP]		= REG_FIELD(ISP176x_HC_OTG_CTRL, 0, 0),
+	/* Make sure the array is sized properly during compilation */
+	[HC_FIELD_MAX]		= {},
+};
+
+static const struct reg_field isp1763_hc_reg_fields[] = {
+	[CMD_LRESET]		= REG_FIELD(ISP1763_HC_USBCMD, 7, 7),
+	[CMD_RESET]		= REG_FIELD(ISP1763_HC_USBCMD, 1, 1),
+	[CMD_RUN]		= REG_FIELD(ISP1763_HC_USBCMD, 0, 0),
+	[STS_PCD]		= REG_FIELD(ISP1763_HC_USBSTS, 2, 2),
+	[HC_FRINDEX]		= REG_FIELD(ISP1763_HC_FRINDEX, 0, 13),
+	[FLAG_CF]		= REG_FIELD(ISP1763_HC_CONFIGFLAG, 0, 0),
+	[HC_ISO_PTD_DONEMAP]	= REG_FIELD(ISP1763_HC_ISO_PTD_DONEMAP, 0, 15),
+	[HC_ISO_PTD_SKIPMAP]	= REG_FIELD(ISP1763_HC_ISO_PTD_SKIPMAP, 0, 15),
+	[HC_ISO_PTD_LASTPTD]	= REG_FIELD(ISP1763_HC_ISO_PTD_LASTPTD, 0, 15),
+	[HC_INT_PTD_DONEMAP]	= REG_FIELD(ISP1763_HC_INT_PTD_DONEMAP, 0, 15),
+	[HC_INT_PTD_SKIPMAP]	= REG_FIELD(ISP1763_HC_INT_PTD_SKIPMAP, 0, 15),
+	[HC_INT_PTD_LASTPTD]	= REG_FIELD(ISP1763_HC_INT_PTD_LASTPTD, 0, 15),
+	[HC_ATL_PTD_DONEMAP]	= REG_FIELD(ISP1763_HC_ATL_PTD_DONEMAP, 0, 15),
+	[HC_ATL_PTD_SKIPMAP]	= REG_FIELD(ISP1763_HC_ATL_PTD_SKIPMAP, 0, 15),
+	[HC_ATL_PTD_LASTPTD]	= REG_FIELD(ISP1763_HC_ATL_PTD_LASTPTD, 0, 15),
+	[PORT_OWNER]		= REG_FIELD(ISP1763_HC_PORTSC1, 13, 13),
+	[PORT_POWER]		= REG_FIELD(ISP1763_HC_PORTSC1, 12, 12),
+	[PORT_LSTATUS]		= REG_FIELD(ISP1763_HC_PORTSC1, 10, 11),
+	[PORT_RESET]		= REG_FIELD(ISP1763_HC_PORTSC1, 8, 8),
+	[PORT_SUSPEND]		= REG_FIELD(ISP1763_HC_PORTSC1, 7, 7),
+	[PORT_RESUME]		= REG_FIELD(ISP1763_HC_PORTSC1, 6, 6),
+	[PORT_PE]		= REG_FIELD(ISP1763_HC_PORTSC1, 2, 2),
+	[PORT_CSC]		= REG_FIELD(ISP1763_HC_PORTSC1, 1, 1),
+	[PORT_CONNECT]		= REG_FIELD(ISP1763_HC_PORTSC1, 0, 0),
+	[HW_DATA_BUS_WIDTH]	= REG_FIELD(ISP1763_HC_HW_MODE_CTRL, 4, 4),
+	[HW_DACK_POL_HIGH]	= REG_FIELD(ISP1763_HC_HW_MODE_CTRL, 6, 6),
+	[HW_DREQ_POL_HIGH]	= REG_FIELD(ISP1763_HC_HW_MODE_CTRL, 5, 5),
+	[HW_INTF_LOCK]		= REG_FIELD(ISP1763_HC_HW_MODE_CTRL, 3, 3),
+	[HW_INTR_HIGH_ACT]	= REG_FIELD(ISP1763_HC_HW_MODE_CTRL, 2, 2),
+	[HW_INTR_EDGE_TRIG]	= REG_FIELD(ISP1763_HC_HW_MODE_CTRL, 1, 1),
+	[HW_GLOBAL_INTR_EN]	= REG_FIELD(ISP1763_HC_HW_MODE_CTRL, 0, 0),
+	[SW_RESET_RESET_ATX]	= REG_FIELD(ISP1763_HC_RESET, 3, 3),
+	[SW_RESET_RESET_ALL]	= REG_FIELD(ISP1763_HC_RESET, 0, 0),
+	[HC_CHIP_ID_HIGH]	= REG_FIELD(ISP1763_HC_CHIP_ID, 0, 15),
+	[HC_CHIP_ID_LOW]	= REG_FIELD(ISP1763_HC_CHIP_REV, 8, 15),
+	[HC_CHIP_REV]		= REG_FIELD(ISP1763_HC_CHIP_REV, 0, 7),
+	[HC_SCRATCH]		= REG_FIELD(ISP1763_HC_SCRATCH, 0, 15),
+	[ISO_BUF_FILL]		= REG_FIELD(ISP1763_HC_BUFFER_STATUS, 2, 2),
+	[INT_BUF_FILL]		= REG_FIELD(ISP1763_HC_BUFFER_STATUS, 1, 1),
+	[ATL_BUF_FILL]		= REG_FIELD(ISP1763_HC_BUFFER_STATUS, 0, 0),
+	[MEM_START_ADDR]	= REG_FIELD(ISP1763_HC_MEMORY, 0, 15),
+	[HC_DATA]		= REG_FIELD(ISP1763_HC_DATA, 0, 15),
+	[HC_INTERRUPT]		= REG_FIELD(ISP1763_HC_INTERRUPT, 0, 10),
+	[HC_ATL_IRQ_ENABLE]	= REG_FIELD(ISP1763_HC_INTERRUPT_ENABLE, 8, 8),
+	[HC_INT_IRQ_ENABLE]	= REG_FIELD(ISP1763_HC_INTERRUPT_ENABLE, 7, 7),
+	[HC_ISO_IRQ_MASK_OR]	= REG_FIELD(ISP1763_HC_ISO_IRQ_MASK_OR, 0, 15),
+	[HC_INT_IRQ_MASK_OR]	= REG_FIELD(ISP1763_HC_INT_IRQ_MASK_OR, 0, 15),
+	[HC_ATL_IRQ_MASK_OR]	= REG_FIELD(ISP1763_HC_ATL_IRQ_MASK_OR, 0, 15),
+	[HC_ISO_IRQ_MASK_AND]	= REG_FIELD(ISP1763_HC_ISO_IRQ_MASK_AND, 0, 15),
+	[HC_INT_IRQ_MASK_AND]	= REG_FIELD(ISP1763_HC_INT_IRQ_MASK_AND, 0, 15),
+	[HC_ATL_IRQ_MASK_AND]	= REG_FIELD(ISP1763_HC_ATL_IRQ_MASK_AND, 0, 15),
+	[HW_HC_2_DIS]		= REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 15, 15),
+	[HW_OTG_DISABLE]	= REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 10, 10),
+	[HW_SW_SEL_HC_DC]	= REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 7, 7),
+	[HW_VBUS_DRV]		= REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 4, 4),
+	[HW_SEL_CP_EXT]		= REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 3, 3),
+	[HW_DM_PULLDOWN]	= REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 2, 2),
+	[HW_DP_PULLDOWN]	= REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 1, 1),
+	[HW_DP_PULLUP]		= REG_FIELD(ISP1763_HC_OTG_CTRL_SET, 0, 0),
+	[HW_HC_2_DIS_CLEAR]	= REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 15, 15),
+	[HW_OTG_DISABLE_CLEAR]	= REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 10, 10),
+	[HW_SW_SEL_HC_DC_CLEAR]	= REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 7, 7),
+	[HW_VBUS_DRV_CLEAR]	= REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 4, 4),
+	[HW_SEL_CP_EXT_CLEAR]	= REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 3, 3),
+	[HW_DM_PULLDOWN_CLEAR]	= REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 2, 2),
+	[HW_DP_PULLDOWN_CLEAR]	= REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 1, 1),
+	[HW_DP_PULLUP_CLEAR]	= REG_FIELD(ISP1763_HC_OTG_CTRL_CLEAR, 0, 0),
+	/* Make sure the array is sized properly during compilation */
+	[HC_FIELD_MAX]		= {},
+};
+
+static const struct regmap_range isp1763_hc_volatile_ranges[] = {
+	regmap_reg_range(ISP1763_HC_USBCMD, ISP1763_HC_ATL_PTD_LASTPTD),
+	regmap_reg_range(ISP1763_HC_BUFFER_STATUS, ISP1763_HC_DATA),
+	regmap_reg_range(ISP1763_HC_INTERRUPT, ISP1763_HC_OTG_CTRL_CLEAR),
+};
+
+static const struct regmap_access_table isp1763_hc_volatile_table = {
+	.yes_ranges	= isp1763_hc_volatile_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(isp1763_hc_volatile_ranges),
+};
+
+static const struct regmap_config isp1763_hc_regmap_conf = {
+	.name = "isp1763-hc",
+	.reg_bits = 8,
+	.reg_stride = 2,
+	.val_bits = 16,
+	.fast_io = true,
+	.max_register = ISP1763_HC_OTG_CTRL_CLEAR,
+	.volatile_table = &isp1763_hc_volatile_table,
+};
+
+static const struct regmap_range isp176x_dc_volatile_ranges[] = {
+	regmap_reg_range(ISP176x_DC_EPMAXPKTSZ, ISP176x_DC_EPTYPE),
+	regmap_reg_range(ISP176x_DC_BUFLEN, ISP176x_DC_EPINDEX),
+};
+
+static const struct regmap_access_table isp176x_dc_volatile_table = {
+	.yes_ranges	= isp176x_dc_volatile_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(isp176x_dc_volatile_ranges),
+};
+
+static const struct regmap_config isp1761_dc_regmap_conf = {
+	.name = "isp1761-dc",
+	.reg_bits = 16,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.fast_io = true,
+	.max_register = ISP176x_DC_TESTMODE,
+	.volatile_table = &isp176x_dc_volatile_table,
+};
+
+static const struct reg_field isp1761_dc_reg_fields[] = {
+	[DC_DEVEN]		= REG_FIELD(ISP176x_DC_ADDRESS, 7, 7),
+	[DC_DEVADDR]		= REG_FIELD(ISP176x_DC_ADDRESS, 0, 6),
+	[DC_VBUSSTAT]		= REG_FIELD(ISP176x_DC_MODE, 8, 8),
+	[DC_SFRESET]		= REG_FIELD(ISP176x_DC_MODE, 4, 4),
+	[DC_GLINTENA]		= REG_FIELD(ISP176x_DC_MODE, 3, 3),
+	[DC_CDBGMOD_ACK]	= REG_FIELD(ISP176x_DC_INTCONF, 6, 6),
+	[DC_DDBGMODIN_ACK]	= REG_FIELD(ISP176x_DC_INTCONF, 4, 4),
+	[DC_DDBGMODOUT_ACK]	= REG_FIELD(ISP176x_DC_INTCONF, 2, 2),
+	[DC_INTPOL]		= REG_FIELD(ISP176x_DC_INTCONF, 0, 0),
+	[DC_IEPRXTX_7]		= REG_FIELD(ISP176x_DC_INTENABLE, 25, 25),
+	[DC_IEPRXTX_6]		= REG_FIELD(ISP176x_DC_INTENABLE, 23, 23),
+	[DC_IEPRXTX_5]		= REG_FIELD(ISP176x_DC_INTENABLE, 21, 21),
+	[DC_IEPRXTX_4]		= REG_FIELD(ISP176x_DC_INTENABLE, 19, 19),
+	[DC_IEPRXTX_3]		= REG_FIELD(ISP176x_DC_INTENABLE, 17, 17),
+	[DC_IEPRXTX_2]		= REG_FIELD(ISP176x_DC_INTENABLE, 15, 15),
+	[DC_IEPRXTX_1]		= REG_FIELD(ISP176x_DC_INTENABLE, 13, 13),
+	[DC_IEPRXTX_0]		= REG_FIELD(ISP176x_DC_INTENABLE, 11, 11),
+	[DC_IEP0SETUP]		= REG_FIELD(ISP176x_DC_INTENABLE, 8, 8),
+	[DC_IEVBUS]		= REG_FIELD(ISP176x_DC_INTENABLE, 7, 7),
+	[DC_IEHS_STA]		= REG_FIELD(ISP176x_DC_INTENABLE, 5, 5),
+	[DC_IERESM]		= REG_FIELD(ISP176x_DC_INTENABLE, 4, 4),
+	[DC_IESUSP]		= REG_FIELD(ISP176x_DC_INTENABLE, 3, 3),
+	[DC_IEBRST]		= REG_FIELD(ISP176x_DC_INTENABLE, 0, 0),
+	[DC_EP0SETUP]		= REG_FIELD(ISP176x_DC_EPINDEX, 5, 5),
+	[DC_ENDPIDX]		= REG_FIELD(ISP176x_DC_EPINDEX, 1, 4),
+	[DC_EPDIR]		= REG_FIELD(ISP176x_DC_EPINDEX, 0, 0),
+	[DC_CLBUF]		= REG_FIELD(ISP176x_DC_CTRLFUNC, 4, 4),
+	[DC_VENDP]		= REG_FIELD(ISP176x_DC_CTRLFUNC, 3, 3),
+	[DC_DSEN]		= REG_FIELD(ISP176x_DC_CTRLFUNC, 2, 2),
+	[DC_STATUS]		= REG_FIELD(ISP176x_DC_CTRLFUNC, 1, 1),
+	[DC_STALL]		= REG_FIELD(ISP176x_DC_CTRLFUNC, 0, 0),
+	[DC_BUFLEN]		= REG_FIELD(ISP176x_DC_BUFLEN, 0, 15),
+	[DC_FFOSZ]		= REG_FIELD(ISP176x_DC_EPMAXPKTSZ, 0, 10),
+	[DC_EPENABLE]		= REG_FIELD(ISP176x_DC_EPTYPE, 3, 3),
+	[DC_ENDPTYP]		= REG_FIELD(ISP176x_DC_EPTYPE, 0, 1),
+	[DC_UFRAMENUM]		= REG_FIELD(ISP176x_DC_FRAMENUM, 11, 13),
+	[DC_FRAMENUM]		= REG_FIELD(ISP176x_DC_FRAMENUM, 0, 10),
+	[DC_CHIP_ID_HIGH]	= REG_FIELD(ISP176x_DC_CHIPID, 16, 31),
+	[DC_CHIP_ID_LOW]	= REG_FIELD(ISP176x_DC_CHIPID, 0, 15),
+	[DC_SCRATCH]		= REG_FIELD(ISP176x_DC_SCRATCH, 0, 15),
+	/* Make sure the array is sized properly during compilation */
+	[DC_FIELD_MAX]		= {},
+};
+
+static const struct regmap_range isp1763_dc_volatile_ranges[] = {
+	regmap_reg_range(ISP1763_DC_EPMAXPKTSZ, ISP1763_DC_EPTYPE),
+	regmap_reg_range(ISP1763_DC_BUFLEN, ISP1763_DC_EPINDEX),
+};
+
+static const struct regmap_access_table isp1763_dc_volatile_table = {
+	.yes_ranges	= isp1763_dc_volatile_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(isp1763_dc_volatile_ranges),
+};
+
+static const struct reg_field isp1763_dc_reg_fields[] = {
+	[DC_DEVEN]		= REG_FIELD(ISP1763_DC_ADDRESS, 7, 7),
+	[DC_DEVADDR]		= REG_FIELD(ISP1763_DC_ADDRESS, 0, 6),
+	[DC_VBUSSTAT]		= REG_FIELD(ISP1763_DC_MODE, 8, 8),
+	[DC_SFRESET]		= REG_FIELD(ISP1763_DC_MODE, 4, 4),
+	[DC_GLINTENA]		= REG_FIELD(ISP1763_DC_MODE, 3, 3),
+	[DC_CDBGMOD_ACK]	= REG_FIELD(ISP1763_DC_INTCONF, 6, 6),
+	[DC_DDBGMODIN_ACK]	= REG_FIELD(ISP1763_DC_INTCONF, 4, 4),
+	[DC_DDBGMODOUT_ACK]	= REG_FIELD(ISP1763_DC_INTCONF, 2, 2),
+	[DC_INTPOL]		= REG_FIELD(ISP1763_DC_INTCONF, 0, 0),
+	[DC_IEPRXTX_7]		= REG_FIELD(ISP1763_DC_INTENABLE, 25, 25),
+	[DC_IEPRXTX_6]		= REG_FIELD(ISP1763_DC_INTENABLE, 23, 23),
+	[DC_IEPRXTX_5]		= REG_FIELD(ISP1763_DC_INTENABLE, 21, 21),
+	[DC_IEPRXTX_4]		= REG_FIELD(ISP1763_DC_INTENABLE, 19, 19),
+	[DC_IEPRXTX_3]		= REG_FIELD(ISP1763_DC_INTENABLE, 17, 17),
+	[DC_IEPRXTX_2]		= REG_FIELD(ISP1763_DC_INTENABLE, 15, 15),
+	[DC_IEPRXTX_1]		= REG_FIELD(ISP1763_DC_INTENABLE, 13, 13),
+	[DC_IEPRXTX_0]		= REG_FIELD(ISP1763_DC_INTENABLE, 11, 11),
+	[DC_IEP0SETUP]		= REG_FIELD(ISP1763_DC_INTENABLE, 8, 8),
+	[DC_IEVBUS]		= REG_FIELD(ISP1763_DC_INTENABLE, 7, 7),
+	[DC_IEHS_STA]		= REG_FIELD(ISP1763_DC_INTENABLE, 5, 5),
+	[DC_IERESM]		= REG_FIELD(ISP1763_DC_INTENABLE, 4, 4),
+	[DC_IESUSP]		= REG_FIELD(ISP1763_DC_INTENABLE, 3, 3),
+	[DC_IEBRST]		= REG_FIELD(ISP1763_DC_INTENABLE, 0, 0),
+	[DC_EP0SETUP]		= REG_FIELD(ISP1763_DC_EPINDEX, 5, 5),
+	[DC_ENDPIDX]		= REG_FIELD(ISP1763_DC_EPINDEX, 1, 4),
+	[DC_EPDIR]		= REG_FIELD(ISP1763_DC_EPINDEX, 0, 0),
+	[DC_CLBUF]		= REG_FIELD(ISP1763_DC_CTRLFUNC, 4, 4),
+	[DC_VENDP]		= REG_FIELD(ISP1763_DC_CTRLFUNC, 3, 3),
+	[DC_DSEN]		= REG_FIELD(ISP1763_DC_CTRLFUNC, 2, 2),
+	[DC_STATUS]		= REG_FIELD(ISP1763_DC_CTRLFUNC, 1, 1),
+	[DC_STALL]		= REG_FIELD(ISP1763_DC_CTRLFUNC, 0, 0),
+	[DC_BUFLEN]		= REG_FIELD(ISP1763_DC_BUFLEN, 0, 15),
+	[DC_FFOSZ]		= REG_FIELD(ISP1763_DC_EPMAXPKTSZ, 0, 10),
+	[DC_EPENABLE]		= REG_FIELD(ISP1763_DC_EPTYPE, 3, 3),
+	[DC_ENDPTYP]		= REG_FIELD(ISP1763_DC_EPTYPE, 0, 1),
+	[DC_UFRAMENUM]		= REG_FIELD(ISP1763_DC_FRAMENUM, 11, 13),
+	[DC_FRAMENUM]		= REG_FIELD(ISP1763_DC_FRAMENUM, 0, 10),
+	[DC_CHIP_ID_HIGH]	= REG_FIELD(ISP1763_DC_CHIPID_HIGH, 0, 15),
+	[DC_CHIP_ID_LOW]	= REG_FIELD(ISP1763_DC_CHIPID_LOW, 0, 15),
+	[DC_SCRATCH]		= REG_FIELD(ISP1763_DC_SCRATCH, 0, 15),
+	/* Make sure the array is sized properly during compilation */
+	[DC_FIELD_MAX]		= {},
+};
+
+static const struct regmap_config isp1763_dc_regmap_conf = {
+	.name = "isp1763-dc",
+	.reg_bits = 8,
+	.reg_stride = 2,
+	.val_bits = 16,
+	.fast_io = true,
+	.max_register = ISP1763_DC_TESTMODE,
+	.volatile_table = &isp1763_dc_volatile_table,
+};
+
+int isp1760_register(struct resource *mem, int irq, unsigned long irqflags,
+		     struct device *dev, unsigned int devflags)
+{
+	const struct regmap_config *hc_regmap;
+	const struct reg_field *hc_reg_fields;
+	const struct regmap_config *dc_regmap;
+	const struct reg_field *dc_reg_fields;
+	struct isp1760_device *isp;
+	struct isp1760_hcd *hcd;
+	struct isp1760_udc *udc;
+	struct regmap_field *f;
+	bool udc_enabled;
+	int ret;
+	int i;
+
+	/*
+	 * If neither the HCD not the UDC is enabled return an error, as no
+	 * device would be registered.
+	 */
+	udc_enabled = ((devflags & ISP1760_FLAG_ISP1763) ||
+		       (devflags & ISP1760_FLAG_ISP1761));
+
+	if ((!IS_ENABLED(CONFIG_USB_ISP1760_HCD) || usb_disabled()) &&
+	    (!udc_enabled || !IS_ENABLED(CONFIG_USB_ISP1761_UDC)))
+		return -ENODEV;
+
+	isp = devm_kzalloc(dev, sizeof(*isp), GFP_KERNEL);
+	if (!isp)
+		return -ENOMEM;
+
+	isp->dev = dev;
+	isp->devflags = devflags;
+	hcd = &isp->hcd;
+	udc = &isp->udc;
+
+	hcd->is_isp1763 = !!(devflags & ISP1760_FLAG_ISP1763);
+	udc->is_isp1763 = !!(devflags & ISP1760_FLAG_ISP1763);
+
+	if (!hcd->is_isp1763 && (devflags & ISP1760_FLAG_BUS_WIDTH_8)) {
+		dev_err(dev, "isp1760/61 do not support data width 8\n");
+		return -EINVAL;
+	}
+
+	if (hcd->is_isp1763) {
+		hc_regmap = &isp1763_hc_regmap_conf;
+		hc_reg_fields = &isp1763_hc_reg_fields[0];
+		dc_regmap = &isp1763_dc_regmap_conf;
+		dc_reg_fields = &isp1763_dc_reg_fields[0];
+	} else {
+		hc_regmap = &isp1760_hc_regmap_conf;
+		hc_reg_fields = &isp1760_hc_reg_fields[0];
+		dc_regmap = &isp1761_dc_regmap_conf;
+		dc_reg_fields = &isp1761_dc_reg_fields[0];
+	}
+
+	isp->rst_gpio = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH);
+	if (IS_ERR(isp->rst_gpio))
+		return PTR_ERR(isp->rst_gpio);
+
+	hcd->base = devm_ioremap_resource(dev, mem);
+	if (IS_ERR(hcd->base))
+		return PTR_ERR(hcd->base);
+
+	hcd->regs = devm_regmap_init_mmio(dev, hcd->base, hc_regmap);
+	if (IS_ERR(hcd->regs))
+		return PTR_ERR(hcd->regs);
+
+	for (i = 0; i < HC_FIELD_MAX; i++) {
+		f = devm_regmap_field_alloc(dev, hcd->regs, hc_reg_fields[i]);
+		if (IS_ERR(f))
+			return PTR_ERR(f);
+
+		hcd->fields[i] = f;
+	}
+
+	udc->regs = devm_regmap_init_mmio(dev, hcd->base, dc_regmap);
+	if (IS_ERR(udc->regs))
+		return PTR_ERR(udc->regs);
+
+	for (i = 0; i < DC_FIELD_MAX; i++) {
+		f = devm_regmap_field_alloc(dev, udc->regs, dc_reg_fields[i]);
+		if (IS_ERR(f))
+			return PTR_ERR(f);
+
+		udc->fields[i] = f;
+	}
+
+	if (hcd->is_isp1763)
+		hcd->memory_layout = &isp1763_memory_conf;
+	else
+		hcd->memory_layout = &isp176x_memory_conf;
+
+	ret = isp1760_init_core(isp);
+	if (ret < 0)
+		return ret;
+
+	if (IS_ENABLED(CONFIG_USB_ISP1760_HCD) && !usb_disabled()) {
+		ret = isp1760_hcd_register(hcd, mem, irq,
+					   irqflags | IRQF_SHARED, dev);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (udc_enabled && IS_ENABLED(CONFIG_USB_ISP1761_UDC)) {
+		ret = isp1760_udc_register(isp, irq, irqflags);
+		if (ret < 0) {
+			isp1760_hcd_unregister(hcd);
+			return ret;
+		}
+	}
+
+	dev_set_drvdata(dev, isp);
+
+	return 0;
+}
+
+void isp1760_unregister(struct device *dev)
+{
+	struct isp1760_device *isp = dev_get_drvdata(dev);
+
+	isp1760_udc_unregister(isp);
+	isp1760_hcd_unregister(&isp->hcd);
+}
+
+MODULE_DESCRIPTION("Driver for the ISP1760 USB-controller from NXP");
+MODULE_AUTHOR("Sebastian Siewior <bigeasy@linuxtronix.de>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/isp1760/isp1760-core.h b/drivers/usb/isp1760/isp1760-core.h
new file mode 100644
index 0000000000..91e0ee3992
--- /dev/null
+++ b/drivers/usb/isp1760/isp1760-core.h
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Driver for the NXP ISP1760 chip
+ *
+ * Copyright 2021 Linaro, Rui Miguel Silva
+ * Copyright 2014 Laurent Pinchart
+ * Copyright 2007 Sebastian Siewior
+ *
+ * Contacts:
+ *	Sebastian Siewior <bigeasy@linutronix.de>
+ *	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	Rui Miguel Silva <rui.silva@linaro.org>
+ */
+
+#ifndef _ISP1760_CORE_H_
+#define _ISP1760_CORE_H_
+
+#include <linux/ioport.h>
+#include <linux/regmap.h>
+
+#include "isp1760-hcd.h"
+#include "isp1760-udc.h"
+
+struct device;
+struct gpio_desc;
+
+/*
+ * Device flags that can vary from board to board.  All of these
+ * indicate the most "atypical" case, so that a devflags of 0 is
+ * a sane default configuration.
+ */
+#define ISP1760_FLAG_BUS_WIDTH_16	0x00000002 /* 16-bit data bus width */
+#define ISP1760_FLAG_PERIPHERAL_EN	0x00000004 /* Port 1 supports Peripheral mode*/
+#define ISP1760_FLAG_ANALOG_OC		0x00000008 /* Analog overcurrent */
+#define ISP1760_FLAG_DACK_POL_HIGH	0x00000010 /* DACK active high */
+#define ISP1760_FLAG_DREQ_POL_HIGH	0x00000020 /* DREQ active high */
+#define ISP1760_FLAG_ISP1761		0x00000040 /* Chip is ISP1761 */
+#define ISP1760_FLAG_INTR_POL_HIGH	0x00000080 /* Interrupt polarity active high */
+#define ISP1760_FLAG_INTR_EDGE_TRIG	0x00000100 /* Interrupt edge triggered */
+#define ISP1760_FLAG_ISP1763		0x00000200 /* Chip is ISP1763 */
+#define ISP1760_FLAG_BUS_WIDTH_8	0x00000400 /* 8-bit data bus width */
+
+struct isp1760_device {
+	struct device *dev;
+
+	unsigned int devflags;
+	struct gpio_desc *rst_gpio;
+
+	struct isp1760_hcd hcd;
+	struct isp1760_udc udc;
+};
+
+int isp1760_register(struct resource *mem, int irq, unsigned long irqflags,
+		     struct device *dev, unsigned int devflags);
+void isp1760_unregister(struct device *dev);
+
+void isp1760_set_pullup(struct isp1760_device *isp, bool enable);
+
+static inline u32 isp1760_field_read(struct regmap_field **fields, u32 field)
+{
+	unsigned int val;
+
+	regmap_field_read(fields[field], &val);
+
+	return val;
+}
+
+static inline void isp1760_field_write(struct regmap_field **fields, u32 field,
+				       u32 val)
+{
+	regmap_field_write(fields[field], val);
+}
+
+static inline void isp1760_field_set(struct regmap_field **fields, u32 field)
+{
+	isp1760_field_write(fields, field, 0xFFFFFFFF);
+}
+
+static inline void isp1760_field_clear(struct regmap_field **fields, u32 field)
+{
+	isp1760_field_write(fields, field, 0);
+}
+
+static inline u32 isp1760_reg_read(struct regmap *regs, u32 reg)
+{
+	unsigned int val;
+
+	regmap_read(regs, reg, &val);
+
+	return val;
+}
+
+static inline void isp1760_reg_write(struct regmap *regs, u32 reg, u32 val)
+{
+	regmap_write(regs, reg, val);
+}
+#endif
diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c
new file mode 100644
index 0000000000..76862ba40f
--- /dev/null
+++ b/drivers/usb/isp1760/isp1760-hcd.c
@@ -0,0 +1,2626 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the NXP ISP1760 chip
+ *
+ * However, the code might contain some bugs. What doesn't work for sure is:
+ * - ISO
+ * - OTG
+ e The interrupt line is configured as active low, level.
+ *
+ * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de>
+ *
+ * (c) 2011 Arvid Brodin <arvid.brodin@enea.com>
+ *
+ * Copyright 2021 Linaro, Rui Miguel Silva <rui.silva@linaro.org>
+ *
+ */
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mm.h>
+#include <linux/timer.h>
+#include <asm/unaligned.h>
+#include <asm/cacheflush.h>
+
+#include "isp1760-core.h"
+#include "isp1760-hcd.h"
+#include "isp1760-regs.h"
+
+static struct kmem_cache *qtd_cachep;
+static struct kmem_cache *qh_cachep;
+static struct kmem_cache *urb_listitem_cachep;
+
+typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh,
+		struct isp1760_qtd *qtd);
+
+static inline struct isp1760_hcd *hcd_to_priv(struct usb_hcd *hcd)
+{
+	return *(struct isp1760_hcd **)hcd->hcd_priv;
+}
+
+#define dw_to_le32(x)	(cpu_to_le32((__force u32)x))
+#define le32_to_dw(x)	((__force __dw)(le32_to_cpu(x)))
+
+/* urb state*/
+#define DELETE_URB		(0x0008)
+#define NO_TRANSFER_ACTIVE	(0xffffffff)
+
+/* Philips Proprietary Transfer Descriptor (PTD) */
+typedef __u32 __bitwise __dw;
+struct ptd {
+	__dw dw0;
+	__dw dw1;
+	__dw dw2;
+	__dw dw3;
+	__dw dw4;
+	__dw dw5;
+	__dw dw6;
+	__dw dw7;
+};
+
+struct ptd_le32 {
+	__le32 dw0;
+	__le32 dw1;
+	__le32 dw2;
+	__le32 dw3;
+	__le32 dw4;
+	__le32 dw5;
+	__le32 dw6;
+	__le32 dw7;
+};
+
+#define PTD_OFFSET		0x0400
+#define ISO_PTD_OFFSET		0x0400
+#define INT_PTD_OFFSET		0x0800
+#define ATL_PTD_OFFSET		0x0c00
+#define PAYLOAD_OFFSET		0x1000
+
+#define ISP_BANK_0		0x00
+#define ISP_BANK_1		0x01
+#define ISP_BANK_2		0x02
+#define ISP_BANK_3		0x03
+
+#define TO_DW(x)	((__force __dw)x)
+#define TO_U32(x)	((__force u32)x)
+
+ /* ATL */
+ /* DW0 */
+#define DW0_VALID_BIT			TO_DW(1)
+#define FROM_DW0_VALID(x)		(TO_U32(x) & 0x01)
+#define TO_DW0_LENGTH(x)		TO_DW((((u32)x) << 3))
+#define TO_DW0_MAXPACKET(x)		TO_DW((((u32)x) << 18))
+#define TO_DW0_MULTI(x)			TO_DW((((u32)x) << 29))
+#define TO_DW0_ENDPOINT(x)		TO_DW((((u32)x) << 31))
+/* DW1 */
+#define TO_DW1_DEVICE_ADDR(x)		TO_DW((((u32)x) << 3))
+#define TO_DW1_PID_TOKEN(x)		TO_DW((((u32)x) << 10))
+#define DW1_TRANS_BULK			TO_DW(((u32)2 << 12))
+#define DW1_TRANS_INT			TO_DW(((u32)3 << 12))
+#define DW1_TRANS_SPLIT			TO_DW(((u32)1 << 14))
+#define DW1_SE_USB_LOSPEED		TO_DW(((u32)2 << 16))
+#define TO_DW1_PORT_NUM(x)		TO_DW((((u32)x) << 18))
+#define TO_DW1_HUB_NUM(x)		TO_DW((((u32)x) << 25))
+/* DW2 */
+#define TO_DW2_DATA_START_ADDR(x)	TO_DW((((u32)x) << 8))
+#define TO_DW2_RL(x)			TO_DW(((x) << 25))
+#define FROM_DW2_RL(x)			((TO_U32(x) >> 25) & 0xf)
+/* DW3 */
+#define FROM_DW3_NRBYTESTRANSFERRED(x)		TO_U32((x) & 0x3fff)
+#define FROM_DW3_SCS_NRBYTESTRANSFERRED(x)	TO_U32((x) & 0x07ff)
+#define TO_DW3_NAKCOUNT(x)		TO_DW(((x) << 19))
+#define FROM_DW3_NAKCOUNT(x)		((TO_U32(x) >> 19) & 0xf)
+#define TO_DW3_CERR(x)			TO_DW(((x) << 23))
+#define FROM_DW3_CERR(x)		((TO_U32(x) >> 23) & 0x3)
+#define TO_DW3_DATA_TOGGLE(x)		TO_DW(((x) << 25))
+#define FROM_DW3_DATA_TOGGLE(x)		((TO_U32(x) >> 25) & 0x1)
+#define TO_DW3_PING(x)			TO_DW(((x) << 26))
+#define FROM_DW3_PING(x)		((TO_U32(x) >> 26) & 0x1)
+#define DW3_ERROR_BIT			TO_DW((1 << 28))
+#define DW3_BABBLE_BIT			TO_DW((1 << 29))
+#define DW3_HALT_BIT			TO_DW((1 << 30))
+#define DW3_ACTIVE_BIT			TO_DW((1 << 31))
+#define FROM_DW3_ACTIVE(x)		((TO_U32(x) >> 31) & 0x01)
+
+#define INT_UNDERRUN			(1 << 2)
+#define INT_BABBLE			(1 << 1)
+#define INT_EXACT			(1 << 0)
+
+#define SETUP_PID	(2)
+#define IN_PID		(1)
+#define OUT_PID		(0)
+
+/* Errata 1 */
+#define RL_COUNTER	(0)
+#define NAK_COUNTER	(0)
+#define ERR_COUNTER	(3)
+
+struct isp1760_qtd {
+	u8 packet_type;
+	void *data_buffer;
+	u32 payload_addr;
+
+	/* the rest is HCD-private */
+	struct list_head qtd_list;
+	struct urb *urb;
+	size_t length;
+	size_t actual_length;
+
+	/* QTD_ENQUEUED:	waiting for transfer (inactive) */
+	/* QTD_PAYLOAD_ALLOC:	chip mem has been allocated for payload */
+	/* QTD_XFER_STARTED:	valid ptd has been written to isp176x - only
+				interrupt handler may touch this qtd! */
+	/* QTD_XFER_COMPLETE:	payload has been transferred successfully */
+	/* QTD_RETIRE:		transfer error/abort qtd */
+#define QTD_ENQUEUED		0
+#define QTD_PAYLOAD_ALLOC	1
+#define QTD_XFER_STARTED	2
+#define QTD_XFER_COMPLETE	3
+#define QTD_RETIRE		4
+	u32 status;
+};
+
+/* Queue head, one for each active endpoint */
+struct isp1760_qh {
+	struct list_head qh_list;
+	struct list_head qtd_list;
+	u32 toggle;
+	u32 ping;
+	int slot;
+	int tt_buffer_dirty;	/* See USB2.0 spec section 11.17.5 */
+};
+
+struct urb_listitem {
+	struct list_head urb_list;
+	struct urb *urb;
+};
+
+static const u32 isp176x_hc_portsc1_fields[] = {
+	[PORT_OWNER]		= BIT(13),
+	[PORT_POWER]		= BIT(12),
+	[PORT_LSTATUS]		= BIT(10),
+	[PORT_RESET]		= BIT(8),
+	[PORT_SUSPEND]		= BIT(7),
+	[PORT_RESUME]		= BIT(6),
+	[PORT_PE]		= BIT(2),
+	[PORT_CSC]		= BIT(1),
+	[PORT_CONNECT]		= BIT(0),
+};
+
+/*
+ * Access functions for isp176x registers regmap fields
+ */
+static u32 isp1760_hcd_read(struct usb_hcd *hcd, u32 field)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	return isp1760_field_read(priv->fields, field);
+}
+
+/*
+ * We need, in isp176x, to write directly the values to the portsc1
+ * register so it will make the other values to trigger.
+ */
+static void isp1760_hcd_portsc1_set_clear(struct isp1760_hcd *priv, u32 field,
+					  u32 val)
+{
+	u32 bit = isp176x_hc_portsc1_fields[field];
+	u16 portsc1_reg = priv->is_isp1763 ? ISP1763_HC_PORTSC1 :
+		ISP176x_HC_PORTSC1;
+	u32 port_status = readl(priv->base + portsc1_reg);
+
+	if (val)
+		writel(port_status | bit, priv->base + portsc1_reg);
+	else
+		writel(port_status & ~bit, priv->base + portsc1_reg);
+}
+
+static void isp1760_hcd_write(struct usb_hcd *hcd, u32 field, u32 val)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	if (unlikely((field >= PORT_OWNER && field <= PORT_CONNECT)))
+		return isp1760_hcd_portsc1_set_clear(priv, field, val);
+
+	isp1760_field_write(priv->fields, field, val);
+}
+
+static void isp1760_hcd_set(struct usb_hcd *hcd, u32 field)
+{
+	isp1760_hcd_write(hcd, field, 0xFFFFFFFF);
+}
+
+static void isp1760_hcd_clear(struct usb_hcd *hcd, u32 field)
+{
+	isp1760_hcd_write(hcd, field, 0);
+}
+
+static int isp1760_hcd_set_and_wait(struct usb_hcd *hcd, u32 field,
+				    u32 timeout_us)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	u32 val;
+
+	isp1760_hcd_set(hcd, field);
+
+	return regmap_field_read_poll_timeout(priv->fields[field], val,
+					      val, 0, timeout_us);
+}
+
+static int isp1760_hcd_set_and_wait_swap(struct usb_hcd *hcd, u32 field,
+					 u32 timeout_us)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	u32 val;
+
+	isp1760_hcd_set(hcd, field);
+
+	return regmap_field_read_poll_timeout(priv->fields[field], val,
+					      !val, 0, timeout_us);
+}
+
+static int isp1760_hcd_clear_and_wait(struct usb_hcd *hcd, u32 field,
+				      u32 timeout_us)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	u32 val;
+
+	isp1760_hcd_clear(hcd, field);
+
+	return regmap_field_read_poll_timeout(priv->fields[field], val,
+					      !val, 0, timeout_us);
+}
+
+static bool isp1760_hcd_is_set(struct usb_hcd *hcd, u32 field)
+{
+	return !!isp1760_hcd_read(hcd, field);
+}
+
+static bool isp1760_hcd_ppc_is_set(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	if (priv->is_isp1763)
+		return true;
+
+	return isp1760_hcd_is_set(hcd, HCS_PPC);
+}
+
+static u32 isp1760_hcd_n_ports(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	if (priv->is_isp1763)
+		return 1;
+
+	return isp1760_hcd_read(hcd, HCS_N_PORTS);
+}
+
+/*
+ * Access functions for isp176x memory (offset >= 0x0400).
+ *
+ * bank_reads8() reads memory locations prefetched by an earlier write to
+ * HC_MEMORY_REG (see isp176x datasheet). Unless you want to do fancy multi-
+ * bank optimizations, you should use the more generic mem_read() below.
+ *
+ * For access to ptd memory, use the specialized ptd_read() and ptd_write()
+ * below.
+ *
+ * These functions copy via MMIO data to/from the device. memcpy_{to|from}io()
+ * doesn't quite work because some people have to enforce 32-bit access
+ */
+static void bank_reads8(void __iomem *src_base, u32 src_offset, u32 bank_addr,
+							__u32 *dst, u32 bytes)
+{
+	__u32 __iomem *src;
+	u32 val;
+	__u8 *src_byteptr;
+	__u8 *dst_byteptr;
+
+	src = src_base + (bank_addr | src_offset);
+
+	if (src_offset < PAYLOAD_OFFSET) {
+		while (bytes >= 4) {
+			*dst = readl_relaxed(src);
+			bytes -= 4;
+			src++;
+			dst++;
+		}
+	} else {
+		while (bytes >= 4) {
+			*dst = __raw_readl(src);
+			bytes -= 4;
+			src++;
+			dst++;
+		}
+	}
+
+	if (!bytes)
+		return;
+
+	/* in case we have 3, 2 or 1 by left. The dst buffer may not be fully
+	 * allocated.
+	 */
+	if (src_offset < PAYLOAD_OFFSET)
+		val = readl_relaxed(src);
+	else
+		val = __raw_readl(src);
+
+	dst_byteptr = (void *) dst;
+	src_byteptr = (void *) &val;
+	while (bytes > 0) {
+		*dst_byteptr = *src_byteptr;
+		dst_byteptr++;
+		src_byteptr++;
+		bytes--;
+	}
+}
+
+static void isp1760_mem_read(struct usb_hcd *hcd, u32 src_offset, void *dst,
+			     u32 bytes)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	isp1760_reg_write(priv->regs, ISP176x_HC_MEMORY, src_offset);
+	ndelay(100);
+
+	bank_reads8(priv->base, src_offset, ISP_BANK_0, dst, bytes);
+}
+
+/*
+ * ISP1763 does not have the banks direct host controller memory access,
+ * needs to use the HC_DATA register. Add data read/write according to this,
+ * and also adjust 16bit access.
+ */
+static void isp1763_mem_read(struct usb_hcd *hcd, u16 srcaddr,
+			     u16 *dstptr, u32 bytes)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	/* Write the starting device address to the hcd memory register */
+	isp1760_reg_write(priv->regs, ISP1763_HC_MEMORY, srcaddr);
+	ndelay(100); /* Delay between consecutive access */
+
+	/* As long there are at least 16-bit to read ... */
+	while (bytes >= 2) {
+		*dstptr = __raw_readw(priv->base + ISP1763_HC_DATA);
+		bytes -= 2;
+		dstptr++;
+	}
+
+	/* If there are no more bytes to read, return */
+	if (bytes <= 0)
+		return;
+
+	*((u8 *)dstptr) = (u8)(readw(priv->base + ISP1763_HC_DATA) & 0xFF);
+}
+
+static void mem_read(struct usb_hcd *hcd, u32 src_offset, __u32 *dst,
+		     u32 bytes)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	if (!priv->is_isp1763)
+		return isp1760_mem_read(hcd, src_offset, (u16 *)dst, bytes);
+
+	isp1763_mem_read(hcd, (u16)src_offset, (u16 *)dst, bytes);
+}
+
+static void isp1760_mem_write(void __iomem *dst_base, u32 dst_offset,
+			      __u32 const *src, u32 bytes)
+{
+	__u32 __iomem *dst;
+
+	dst = dst_base + dst_offset;
+
+	if (dst_offset < PAYLOAD_OFFSET) {
+		while (bytes >= 4) {
+			writel_relaxed(*src, dst);
+			bytes -= 4;
+			src++;
+			dst++;
+		}
+	} else {
+		while (bytes >= 4) {
+			__raw_writel(*src, dst);
+			bytes -= 4;
+			src++;
+			dst++;
+		}
+	}
+
+	if (!bytes)
+		return;
+	/* in case we have 3, 2 or 1 bytes left. The buffer is allocated and the
+	 * extra bytes should not be read by the HW.
+	 */
+
+	if (dst_offset < PAYLOAD_OFFSET)
+		writel_relaxed(*src, dst);
+	else
+		__raw_writel(*src, dst);
+}
+
+static void isp1763_mem_write(struct usb_hcd *hcd, u16 dstaddr, u16 *src,
+			      u32 bytes)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	/* Write the starting device address to the hcd memory register */
+	isp1760_reg_write(priv->regs, ISP1763_HC_MEMORY, dstaddr);
+	ndelay(100); /* Delay between consecutive access */
+
+	while (bytes >= 2) {
+		/* Get and write the data; then adjust the data ptr and len */
+		__raw_writew(*src, priv->base + ISP1763_HC_DATA);
+		bytes -= 2;
+		src++;
+	}
+
+	/* If there are no more bytes to process, return */
+	if (bytes <= 0)
+		return;
+
+	/*
+	 * The only way to get here is if there is a single byte left,
+	 * get it and write it to the data reg;
+	 */
+	writew(*((u8 *)src), priv->base + ISP1763_HC_DATA);
+}
+
+static void mem_write(struct usb_hcd *hcd, u32 dst_offset, __u32 *src,
+		      u32 bytes)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	if (!priv->is_isp1763)
+		return isp1760_mem_write(priv->base, dst_offset, src, bytes);
+
+	isp1763_mem_write(hcd, dst_offset, (u16 *)src, bytes);
+}
+
+/*
+ * Read and write ptds. 'ptd_offset' should be one of ISO_PTD_OFFSET,
+ * INT_PTD_OFFSET, and ATL_PTD_OFFSET. 'slot' should be less than 32.
+ */
+static void isp1760_ptd_read(struct usb_hcd *hcd, u32 ptd_offset, u32 slot,
+			     struct ptd *ptd)
+{
+	u16 src_offset = ptd_offset + slot * sizeof(*ptd);
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	isp1760_reg_write(priv->regs, ISP176x_HC_MEMORY, src_offset);
+	ndelay(90);
+
+	bank_reads8(priv->base, src_offset, ISP_BANK_0, (void *)ptd,
+		    sizeof(*ptd));
+}
+
+static void isp1763_ptd_read(struct usb_hcd *hcd, u32 ptd_offset, u32 slot,
+			     struct ptd *ptd)
+{
+	u16 src_offset = ptd_offset + slot * sizeof(*ptd);
+	struct ptd_le32 le32_ptd;
+
+	isp1763_mem_read(hcd, src_offset, (u16 *)&le32_ptd, sizeof(le32_ptd));
+	/* Normalize the data obtained */
+	ptd->dw0 = le32_to_dw(le32_ptd.dw0);
+	ptd->dw1 = le32_to_dw(le32_ptd.dw1);
+	ptd->dw2 = le32_to_dw(le32_ptd.dw2);
+	ptd->dw3 = le32_to_dw(le32_ptd.dw3);
+	ptd->dw4 = le32_to_dw(le32_ptd.dw4);
+	ptd->dw5 = le32_to_dw(le32_ptd.dw5);
+	ptd->dw6 = le32_to_dw(le32_ptd.dw6);
+	ptd->dw7 = le32_to_dw(le32_ptd.dw7);
+}
+
+static void ptd_read(struct usb_hcd *hcd, u32 ptd_offset, u32 slot,
+		     struct ptd *ptd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	if (!priv->is_isp1763)
+		return isp1760_ptd_read(hcd, ptd_offset, slot, ptd);
+
+	isp1763_ptd_read(hcd, ptd_offset, slot, ptd);
+}
+
+static void isp1763_ptd_write(struct usb_hcd *hcd, u32 ptd_offset, u32 slot,
+			      struct ptd *cpu_ptd)
+{
+	u16 dst_offset = ptd_offset + slot * sizeof(*cpu_ptd);
+	struct ptd_le32 ptd;
+
+	ptd.dw0 = dw_to_le32(cpu_ptd->dw0);
+	ptd.dw1 = dw_to_le32(cpu_ptd->dw1);
+	ptd.dw2 = dw_to_le32(cpu_ptd->dw2);
+	ptd.dw3 = dw_to_le32(cpu_ptd->dw3);
+	ptd.dw4 = dw_to_le32(cpu_ptd->dw4);
+	ptd.dw5 = dw_to_le32(cpu_ptd->dw5);
+	ptd.dw6 = dw_to_le32(cpu_ptd->dw6);
+	ptd.dw7 = dw_to_le32(cpu_ptd->dw7);
+
+	isp1763_mem_write(hcd, dst_offset,  (u16 *)&ptd.dw0,
+			  8 * sizeof(ptd.dw0));
+}
+
+static void isp1760_ptd_write(void __iomem *base, u32 ptd_offset, u32 slot,
+			      struct ptd *ptd)
+{
+	u32 dst_offset = ptd_offset + slot * sizeof(*ptd);
+
+	/*
+	 * Make sure dw0 gets written last (after other dw's and after payload)
+	 *  since it contains the enable bit
+	 */
+	isp1760_mem_write(base, dst_offset + sizeof(ptd->dw0),
+			  (__force u32 *)&ptd->dw1, 7 * sizeof(ptd->dw1));
+	wmb();
+	isp1760_mem_write(base, dst_offset, (__force u32 *)&ptd->dw0,
+			  sizeof(ptd->dw0));
+}
+
+static void ptd_write(struct usb_hcd *hcd, u32 ptd_offset, u32 slot,
+		      struct ptd *ptd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	if (!priv->is_isp1763)
+		return isp1760_ptd_write(priv->base, ptd_offset, slot, ptd);
+
+	isp1763_ptd_write(hcd, ptd_offset, slot, ptd);
+}
+
+/* memory management of the 60kb on the chip from 0x1000 to 0xffff */
+static void init_memory(struct isp1760_hcd *priv)
+{
+	const struct isp1760_memory_layout *mem = priv->memory_layout;
+	int i, j, curr;
+	u32 payload_addr;
+
+	payload_addr = PAYLOAD_OFFSET;
+
+	for (i = 0, curr = 0; i < ARRAY_SIZE(mem->blocks); i++, curr += j) {
+		for (j = 0; j < mem->blocks[i]; j++) {
+			priv->memory_pool[curr + j].start = payload_addr;
+			priv->memory_pool[curr + j].size = mem->blocks_size[i];
+			priv->memory_pool[curr + j].free = 1;
+			payload_addr += priv->memory_pool[curr + j].size;
+		}
+	}
+
+	WARN_ON(payload_addr - priv->memory_pool[0].start >
+		mem->payload_area_size);
+}
+
+static void alloc_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	const struct isp1760_memory_layout *mem = priv->memory_layout;
+	int i;
+
+	WARN_ON(qtd->payload_addr);
+
+	if (!qtd->length)
+		return;
+
+	for (i = 0; i < mem->payload_blocks; i++) {
+		if (priv->memory_pool[i].size >= qtd->length &&
+				priv->memory_pool[i].free) {
+			priv->memory_pool[i].free = 0;
+			qtd->payload_addr = priv->memory_pool[i].start;
+			return;
+		}
+	}
+}
+
+static void free_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	const struct isp1760_memory_layout *mem = priv->memory_layout;
+	int i;
+
+	if (!qtd->payload_addr)
+		return;
+
+	for (i = 0; i < mem->payload_blocks; i++) {
+		if (priv->memory_pool[i].start == qtd->payload_addr) {
+			WARN_ON(priv->memory_pool[i].free);
+			priv->memory_pool[i].free = 1;
+			qtd->payload_addr = 0;
+			return;
+		}
+	}
+
+	dev_err(hcd->self.controller, "%s: Invalid pointer: %08x\n",
+						__func__, qtd->payload_addr);
+	WARN_ON(1);
+	qtd->payload_addr = 0;
+}
+
+/* reset a non-running (STS_HALT == 1) controller */
+static int ehci_reset(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	hcd->state = HC_STATE_HALT;
+	priv->next_statechange = jiffies;
+
+	return isp1760_hcd_set_and_wait_swap(hcd, CMD_RESET, 250 * 1000);
+}
+
+static struct isp1760_qh *qh_alloc(gfp_t flags)
+{
+	struct isp1760_qh *qh;
+
+	qh = kmem_cache_zalloc(qh_cachep, flags);
+	if (!qh)
+		return NULL;
+
+	INIT_LIST_HEAD(&qh->qh_list);
+	INIT_LIST_HEAD(&qh->qtd_list);
+	qh->slot = -1;
+
+	return qh;
+}
+
+static void qh_free(struct isp1760_qh *qh)
+{
+	WARN_ON(!list_empty(&qh->qtd_list));
+	WARN_ON(qh->slot > -1);
+	kmem_cache_free(qh_cachep, qh);
+}
+
+/* one-time init, only for memory state */
+static int priv_init(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	u32 isoc_cache;
+	u32 isoc_thres;
+	int i;
+
+	spin_lock_init(&priv->lock);
+
+	for (i = 0; i < QH_END; i++)
+		INIT_LIST_HEAD(&priv->qh_list[i]);
+
+	/*
+	 * hw default: 1K periodic list heads, one per frame.
+	 * periodic_size can shrink by USBCMD update if hcc_params allows.
+	 */
+	priv->periodic_size = DEFAULT_I_TDPS;
+
+	if (priv->is_isp1763) {
+		priv->i_thresh = 2;
+		return 0;
+	}
+
+	/* controllers may cache some of the periodic schedule ... */
+	isoc_cache = isp1760_hcd_read(hcd, HCC_ISOC_CACHE);
+	isoc_thres = isp1760_hcd_read(hcd, HCC_ISOC_THRES);
+
+	/* full frame cache */
+	if (isoc_cache)
+		priv->i_thresh = 8;
+	else /* N microframes cached */
+		priv->i_thresh = 2 + isoc_thres;
+
+	return 0;
+}
+
+static int isp1760_hc_setup(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	u32 atx_reset;
+	int result;
+	u32 scratch;
+	u32 pattern;
+
+	if (priv->is_isp1763)
+		pattern = 0xcafe;
+	else
+		pattern = 0xdeadcafe;
+
+	isp1760_hcd_write(hcd, HC_SCRATCH, pattern);
+
+	/*
+	 * we do not care about the read value here we just want to
+	 * change bus pattern.
+	 */
+	isp1760_hcd_read(hcd, HC_CHIP_ID_HIGH);
+	scratch = isp1760_hcd_read(hcd, HC_SCRATCH);
+	if (scratch != pattern) {
+		dev_err(hcd->self.controller, "Scratch test failed. 0x%08x\n",
+			scratch);
+		return -ENODEV;
+	}
+
+	/*
+	 * The RESET_HC bit in the SW_RESET register is supposed to reset the
+	 * host controller without touching the CPU interface registers, but at
+	 * least on the ISP1761 it seems to behave as the RESET_ALL bit and
+	 * reset the whole device. We thus can't use it here, so let's reset
+	 * the host controller through the EHCI USB Command register. The device
+	 * has been reset in core code anyway, so this shouldn't matter.
+	 */
+	isp1760_hcd_clear(hcd, ISO_BUF_FILL);
+	isp1760_hcd_clear(hcd, INT_BUF_FILL);
+	isp1760_hcd_clear(hcd, ATL_BUF_FILL);
+
+	isp1760_hcd_set(hcd, HC_ATL_PTD_SKIPMAP);
+	isp1760_hcd_set(hcd, HC_INT_PTD_SKIPMAP);
+	isp1760_hcd_set(hcd, HC_ISO_PTD_SKIPMAP);
+
+	result = ehci_reset(hcd);
+	if (result)
+		return result;
+
+	/* Step 11 passed */
+
+	/* ATL reset */
+	if (priv->is_isp1763)
+		atx_reset = SW_RESET_RESET_ATX;
+	else
+		atx_reset = ALL_ATX_RESET;
+
+	isp1760_hcd_set(hcd, atx_reset);
+	mdelay(10);
+	isp1760_hcd_clear(hcd, atx_reset);
+
+	if (priv->is_isp1763) {
+		isp1760_hcd_set(hcd, HW_OTG_DISABLE);
+		isp1760_hcd_set(hcd, HW_SW_SEL_HC_DC_CLEAR);
+		isp1760_hcd_set(hcd, HW_HC_2_DIS_CLEAR);
+		mdelay(10);
+
+		isp1760_hcd_set(hcd, HW_INTF_LOCK);
+	}
+
+	isp1760_hcd_set(hcd, HC_INT_IRQ_ENABLE);
+	isp1760_hcd_set(hcd, HC_ATL_IRQ_ENABLE);
+
+	return priv_init(hcd);
+}
+
+static u32 base_to_chip(u32 base)
+{
+	return ((base - 0x400) >> 3);
+}
+
+static int last_qtd_of_urb(struct isp1760_qtd *qtd, struct isp1760_qh *qh)
+{
+	struct urb *urb;
+
+	if (list_is_last(&qtd->qtd_list, &qh->qtd_list))
+		return 1;
+
+	urb = qtd->urb;
+	qtd = list_entry(qtd->qtd_list.next, typeof(*qtd), qtd_list);
+	return (qtd->urb != urb);
+}
+
+/* magic numbers that can affect system performance */
+#define	EHCI_TUNE_CERR		3	/* 0-3 qtd retries; 0 == don't stop */
+#define	EHCI_TUNE_RL_HS		4	/* nak throttle; see 4.9 */
+#define	EHCI_TUNE_RL_TT		0
+#define	EHCI_TUNE_MULT_HS	1	/* 1-3 transactions/uframe; 4.10.3 */
+#define	EHCI_TUNE_MULT_TT	1
+#define	EHCI_TUNE_FLS		2	/* (small) 256 frame schedule */
+
+static void create_ptd_atl(struct isp1760_qh *qh,
+			struct isp1760_qtd *qtd, struct ptd *ptd)
+{
+	u32 maxpacket;
+	u32 multi;
+	u32 rl = RL_COUNTER;
+	u32 nak = NAK_COUNTER;
+
+	memset(ptd, 0, sizeof(*ptd));
+
+	/* according to 3.6.2, max packet len can not be > 0x400 */
+	maxpacket = usb_maxpacket(qtd->urb->dev, qtd->urb->pipe);
+	multi =  1 + ((maxpacket >> 11) & 0x3);
+	maxpacket &= 0x7ff;
+
+	/* DW0 */
+	ptd->dw0 = DW0_VALID_BIT;
+	ptd->dw0 |= TO_DW0_LENGTH(qtd->length);
+	ptd->dw0 |= TO_DW0_MAXPACKET(maxpacket);
+	ptd->dw0 |= TO_DW0_ENDPOINT(usb_pipeendpoint(qtd->urb->pipe));
+
+	/* DW1 */
+	ptd->dw1 = TO_DW((usb_pipeendpoint(qtd->urb->pipe) >> 1));
+	ptd->dw1 |= TO_DW1_DEVICE_ADDR(usb_pipedevice(qtd->urb->pipe));
+	ptd->dw1 |= TO_DW1_PID_TOKEN(qtd->packet_type);
+
+	if (usb_pipebulk(qtd->urb->pipe))
+		ptd->dw1 |= DW1_TRANS_BULK;
+	else if  (usb_pipeint(qtd->urb->pipe))
+		ptd->dw1 |= DW1_TRANS_INT;
+
+	if (qtd->urb->dev->speed != USB_SPEED_HIGH) {
+		/* split transaction */
+
+		ptd->dw1 |= DW1_TRANS_SPLIT;
+		if (qtd->urb->dev->speed == USB_SPEED_LOW)
+			ptd->dw1 |= DW1_SE_USB_LOSPEED;
+
+		ptd->dw1 |= TO_DW1_PORT_NUM(qtd->urb->dev->ttport);
+		ptd->dw1 |= TO_DW1_HUB_NUM(qtd->urb->dev->tt->hub->devnum);
+
+		/* SE bit for Split INT transfers */
+		if (usb_pipeint(qtd->urb->pipe) &&
+				(qtd->urb->dev->speed == USB_SPEED_LOW))
+			ptd->dw1 |= DW1_SE_USB_LOSPEED;
+
+		rl = 0;
+		nak = 0;
+	} else {
+		ptd->dw0 |= TO_DW0_MULTI(multi);
+		if (usb_pipecontrol(qtd->urb->pipe) ||
+						usb_pipebulk(qtd->urb->pipe))
+			ptd->dw3 |= TO_DW3_PING(qh->ping);
+	}
+	/* DW2 */
+	ptd->dw2 = 0;
+	ptd->dw2 |= TO_DW2_DATA_START_ADDR(base_to_chip(qtd->payload_addr));
+	ptd->dw2 |= TO_DW2_RL(rl);
+
+	/* DW3 */
+	ptd->dw3 |= TO_DW3_NAKCOUNT(nak);
+	ptd->dw3 |= TO_DW3_DATA_TOGGLE(qh->toggle);
+	if (usb_pipecontrol(qtd->urb->pipe)) {
+		if (qtd->data_buffer == qtd->urb->setup_packet)
+			ptd->dw3 &= ~TO_DW3_DATA_TOGGLE(1);
+		else if (last_qtd_of_urb(qtd, qh))
+			ptd->dw3 |= TO_DW3_DATA_TOGGLE(1);
+	}
+
+	ptd->dw3 |= DW3_ACTIVE_BIT;
+	/* Cerr */
+	ptd->dw3 |= TO_DW3_CERR(ERR_COUNTER);
+}
+
+static void transform_add_int(struct isp1760_qh *qh,
+			struct isp1760_qtd *qtd, struct ptd *ptd)
+{
+	u32 usof;
+	u32 period;
+
+	/*
+	 * Most of this is guessing. ISP1761 datasheet is quite unclear, and
+	 * the algorithm from the original Philips driver code, which was
+	 * pretty much used in this driver before as well, is quite horrendous
+	 * and, i believe, incorrect. The code below follows the datasheet and
+	 * USB2.0 spec as far as I can tell, and plug/unplug seems to be much
+	 * more reliable this way (fingers crossed...).
+	 */
+
+	if (qtd->urb->dev->speed == USB_SPEED_HIGH) {
+		/* urb->interval is in units of microframes (1/8 ms) */
+		period = qtd->urb->interval >> 3;
+
+		if (qtd->urb->interval > 4)
+			usof = 0x01; /* One bit set =>
+						interval 1 ms * uFrame-match */
+		else if (qtd->urb->interval > 2)
+			usof = 0x22; /* Two bits set => interval 1/2 ms */
+		else if (qtd->urb->interval > 1)
+			usof = 0x55; /* Four bits set => interval 1/4 ms */
+		else
+			usof = 0xff; /* All bits set => interval 1/8 ms */
+	} else {
+		/* urb->interval is in units of frames (1 ms) */
+		period = qtd->urb->interval;
+		usof = 0x0f;		/* Execute Start Split on any of the
+					   four first uFrames */
+
+		/*
+		 * First 8 bits in dw5 is uSCS and "specifies which uSOF the
+		 * complete split needs to be sent. Valid only for IN." Also,
+		 * "All bits can be set to one for every transfer." (p 82,
+		 * ISP1761 data sheet.) 0x1c is from Philips driver. Where did
+		 * that number come from? 0xff seems to work fine...
+		 */
+		/* ptd->dw5 = 0x1c; */
+		ptd->dw5 = TO_DW(0xff); /* Execute Complete Split on any uFrame */
+	}
+
+	period = period >> 1;/* Ensure equal or shorter period than requested */
+	period &= 0xf8; /* Mask off too large values and lowest unused 3 bits */
+
+	ptd->dw2 |= TO_DW(period);
+	ptd->dw4 = TO_DW(usof);
+}
+
+static void create_ptd_int(struct isp1760_qh *qh,
+			struct isp1760_qtd *qtd, struct ptd *ptd)
+{
+	create_ptd_atl(qh, qtd, ptd);
+	transform_add_int(qh, qtd, ptd);
+}
+
+static void isp1760_urb_done(struct usb_hcd *hcd, struct urb *urb)
+__releases(priv->lock)
+__acquires(priv->lock)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	if (!urb->unlinked) {
+		if (urb->status == -EINPROGRESS)
+			urb->status = 0;
+	}
+
+	if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) {
+		void *ptr;
+		for (ptr = urb->transfer_buffer;
+		     ptr < urb->transfer_buffer + urb->transfer_buffer_length;
+		     ptr += PAGE_SIZE)
+			flush_dcache_page(virt_to_page(ptr));
+	}
+
+	/* complete() can reenter this HCD */
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+	spin_unlock(&priv->lock);
+	usb_hcd_giveback_urb(hcd, urb, urb->status);
+	spin_lock(&priv->lock);
+}
+
+static struct isp1760_qtd *qtd_alloc(gfp_t flags, struct urb *urb,
+								u8 packet_type)
+{
+	struct isp1760_qtd *qtd;
+
+	qtd = kmem_cache_zalloc(qtd_cachep, flags);
+	if (!qtd)
+		return NULL;
+
+	INIT_LIST_HEAD(&qtd->qtd_list);
+	qtd->urb = urb;
+	qtd->packet_type = packet_type;
+	qtd->status = QTD_ENQUEUED;
+	qtd->actual_length = 0;
+
+	return qtd;
+}
+
+static void qtd_free(struct isp1760_qtd *qtd)
+{
+	WARN_ON(qtd->payload_addr);
+	kmem_cache_free(qtd_cachep, qtd);
+}
+
+static void start_bus_transfer(struct usb_hcd *hcd, u32 ptd_offset, int slot,
+				struct isp1760_slotinfo *slots,
+				struct isp1760_qtd *qtd, struct isp1760_qh *qh,
+				struct ptd *ptd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	const struct isp1760_memory_layout *mem = priv->memory_layout;
+	int skip_map;
+
+	WARN_ON((slot < 0) || (slot > mem->slot_num - 1));
+	WARN_ON(qtd->length && !qtd->payload_addr);
+	WARN_ON(slots[slot].qtd);
+	WARN_ON(slots[slot].qh);
+	WARN_ON(qtd->status != QTD_PAYLOAD_ALLOC);
+
+	if (priv->is_isp1763)
+		ndelay(100);
+
+	/* Make sure done map has not triggered from some unlinked transfer */
+	if (ptd_offset == ATL_PTD_OFFSET) {
+		skip_map = isp1760_hcd_read(hcd, HC_ATL_PTD_SKIPMAP);
+		isp1760_hcd_write(hcd, HC_ATL_PTD_SKIPMAP,
+				  skip_map | (1 << slot));
+		priv->atl_done_map |= isp1760_hcd_read(hcd, HC_ATL_PTD_DONEMAP);
+		priv->atl_done_map &= ~(1 << slot);
+	} else {
+		skip_map = isp1760_hcd_read(hcd, HC_INT_PTD_SKIPMAP);
+		isp1760_hcd_write(hcd, HC_INT_PTD_SKIPMAP,
+				  skip_map | (1 << slot));
+		priv->int_done_map |= isp1760_hcd_read(hcd, HC_INT_PTD_DONEMAP);
+		priv->int_done_map &= ~(1 << slot);
+	}
+
+	skip_map &= ~(1 << slot);
+	qh->slot = slot;
+	qtd->status = QTD_XFER_STARTED;
+	slots[slot].timestamp = jiffies;
+	slots[slot].qtd = qtd;
+	slots[slot].qh = qh;
+	ptd_write(hcd, ptd_offset, slot, ptd);
+
+	if (ptd_offset == ATL_PTD_OFFSET)
+		isp1760_hcd_write(hcd, HC_ATL_PTD_SKIPMAP, skip_map);
+	else
+		isp1760_hcd_write(hcd, HC_INT_PTD_SKIPMAP, skip_map);
+}
+
+static int is_short_bulk(struct isp1760_qtd *qtd)
+{
+	return (usb_pipebulk(qtd->urb->pipe) &&
+					(qtd->actual_length < qtd->length));
+}
+
+static void collect_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh,
+						struct list_head *urb_list)
+{
+	struct isp1760_qtd *qtd, *qtd_next;
+	struct urb_listitem *urb_listitem;
+	int last_qtd;
+
+	list_for_each_entry_safe(qtd, qtd_next, &qh->qtd_list, qtd_list) {
+		if (qtd->status < QTD_XFER_COMPLETE)
+			break;
+
+		last_qtd = last_qtd_of_urb(qtd, qh);
+
+		if ((!last_qtd) && (qtd->status == QTD_RETIRE))
+			qtd_next->status = QTD_RETIRE;
+
+		if (qtd->status == QTD_XFER_COMPLETE) {
+			if (qtd->actual_length) {
+				switch (qtd->packet_type) {
+				case IN_PID:
+					mem_read(hcd, qtd->payload_addr,
+						 qtd->data_buffer,
+						 qtd->actual_length);
+					fallthrough;
+				case OUT_PID:
+					qtd->urb->actual_length +=
+							qtd->actual_length;
+					fallthrough;
+				case SETUP_PID:
+					break;
+				}
+			}
+
+			if (is_short_bulk(qtd)) {
+				if (qtd->urb->transfer_flags & URB_SHORT_NOT_OK)
+					qtd->urb->status = -EREMOTEIO;
+				if (!last_qtd)
+					qtd_next->status = QTD_RETIRE;
+			}
+		}
+
+		if (qtd->payload_addr)
+			free_mem(hcd, qtd);
+
+		if (last_qtd) {
+			if ((qtd->status == QTD_RETIRE) &&
+					(qtd->urb->status == -EINPROGRESS))
+				qtd->urb->status = -EPIPE;
+			/* Defer calling of urb_done() since it releases lock */
+			urb_listitem = kmem_cache_zalloc(urb_listitem_cachep,
+								GFP_ATOMIC);
+			if (unlikely(!urb_listitem))
+				break; /* Try again on next call */
+			urb_listitem->urb = qtd->urb;
+			list_add_tail(&urb_listitem->urb_list, urb_list);
+		}
+
+		list_del(&qtd->qtd_list);
+		qtd_free(qtd);
+	}
+}
+
+#define ENQUEUE_DEPTH	2
+static void enqueue_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	const struct isp1760_memory_layout *mem = priv->memory_layout;
+	int slot_num = mem->slot_num;
+	int ptd_offset;
+	struct isp1760_slotinfo *slots;
+	int curr_slot, free_slot;
+	int n;
+	struct ptd ptd;
+	struct isp1760_qtd *qtd;
+
+	if (unlikely(list_empty(&qh->qtd_list))) {
+		WARN_ON(1);
+		return;
+	}
+
+	/* Make sure this endpoint's TT buffer is clean before queueing ptds */
+	if (qh->tt_buffer_dirty)
+		return;
+
+	if (usb_pipeint(list_entry(qh->qtd_list.next, struct isp1760_qtd,
+							qtd_list)->urb->pipe)) {
+		ptd_offset = INT_PTD_OFFSET;
+		slots = priv->int_slots;
+	} else {
+		ptd_offset = ATL_PTD_OFFSET;
+		slots = priv->atl_slots;
+	}
+
+	free_slot = -1;
+	for (curr_slot = 0; curr_slot < slot_num; curr_slot++) {
+		if ((free_slot == -1) && (slots[curr_slot].qtd == NULL))
+			free_slot = curr_slot;
+		if (slots[curr_slot].qh == qh)
+			break;
+	}
+
+	n = 0;
+	list_for_each_entry(qtd, &qh->qtd_list, qtd_list) {
+		if (qtd->status == QTD_ENQUEUED) {
+			WARN_ON(qtd->payload_addr);
+			alloc_mem(hcd, qtd);
+			if ((qtd->length) && (!qtd->payload_addr))
+				break;
+
+			if (qtd->length && (qtd->packet_type == SETUP_PID ||
+					    qtd->packet_type == OUT_PID)) {
+				mem_write(hcd, qtd->payload_addr,
+					  qtd->data_buffer, qtd->length);
+			}
+
+			qtd->status = QTD_PAYLOAD_ALLOC;
+		}
+
+		if (qtd->status == QTD_PAYLOAD_ALLOC) {
+/*
+			if ((curr_slot > 31) && (free_slot == -1))
+				dev_dbg(hcd->self.controller, "%s: No slot "
+					"available for transfer\n", __func__);
+*/
+			/* Start xfer for this endpoint if not already done */
+			if ((curr_slot > slot_num - 1) && (free_slot > -1)) {
+				if (usb_pipeint(qtd->urb->pipe))
+					create_ptd_int(qh, qtd, &ptd);
+				else
+					create_ptd_atl(qh, qtd, &ptd);
+
+				start_bus_transfer(hcd, ptd_offset, free_slot,
+							slots, qtd, qh, &ptd);
+				curr_slot = free_slot;
+			}
+
+			n++;
+			if (n >= ENQUEUE_DEPTH)
+				break;
+		}
+	}
+}
+
+static void schedule_ptds(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv;
+	struct isp1760_qh *qh, *qh_next;
+	struct list_head *ep_queue;
+	LIST_HEAD(urb_list);
+	struct urb_listitem *urb_listitem, *urb_listitem_next;
+	int i;
+
+	if (!hcd) {
+		WARN_ON(1);
+		return;
+	}
+
+	priv = hcd_to_priv(hcd);
+
+	/*
+	 * check finished/retired xfers, transfer payloads, call urb_done()
+	 */
+	for (i = 0; i < QH_END; i++) {
+		ep_queue = &priv->qh_list[i];
+		list_for_each_entry_safe(qh, qh_next, ep_queue, qh_list) {
+			collect_qtds(hcd, qh, &urb_list);
+			if (list_empty(&qh->qtd_list))
+				list_del(&qh->qh_list);
+		}
+	}
+
+	list_for_each_entry_safe(urb_listitem, urb_listitem_next, &urb_list,
+								urb_list) {
+		isp1760_urb_done(hcd, urb_listitem->urb);
+		kmem_cache_free(urb_listitem_cachep, urb_listitem);
+	}
+
+	/*
+	 * Schedule packets for transfer.
+	 *
+	 * According to USB2.0 specification:
+	 *
+	 * 1st prio: interrupt xfers, up to 80 % of bandwidth
+	 * 2nd prio: control xfers
+	 * 3rd prio: bulk xfers
+	 *
+	 * ... but let's use a simpler scheme here (mostly because ISP1761 doc
+	 * is very unclear on how to prioritize traffic):
+	 *
+	 * 1) Enqueue any queued control transfers, as long as payload chip mem
+	 *    and PTD ATL slots are available.
+	 * 2) Enqueue any queued INT transfers, as long as payload chip mem
+	 *    and PTD INT slots are available.
+	 * 3) Enqueue any queued bulk transfers, as long as payload chip mem
+	 *    and PTD ATL slots are available.
+	 *
+	 * Use double buffering (ENQUEUE_DEPTH==2) as a compromise between
+	 * conservation of chip mem and performance.
+	 *
+	 * I'm sure this scheme could be improved upon!
+	 */
+	for (i = 0; i < QH_END; i++) {
+		ep_queue = &priv->qh_list[i];
+		list_for_each_entry_safe(qh, qh_next, ep_queue, qh_list)
+			enqueue_qtds(hcd, qh);
+	}
+}
+
+#define PTD_STATE_QTD_DONE	1
+#define PTD_STATE_QTD_RELOAD	2
+#define PTD_STATE_URB_RETIRE	3
+
+static int check_int_transfer(struct usb_hcd *hcd, struct ptd *ptd,
+								struct urb *urb)
+{
+	u32 dw4;
+	int i;
+
+	dw4 = TO_U32(ptd->dw4);
+	dw4 >>= 8;
+
+	/* FIXME: ISP1761 datasheet does not say what to do with these. Do we
+	   need to handle these errors? Is it done in hardware? */
+
+	if (ptd->dw3 & DW3_HALT_BIT) {
+
+		urb->status = -EPROTO; /* Default unknown error */
+
+		for (i = 0; i < 8; i++) {
+			switch (dw4 & 0x7) {
+			case INT_UNDERRUN:
+				dev_dbg(hcd->self.controller, "%s: underrun "
+						"during uFrame %d\n",
+						__func__, i);
+				urb->status = -ECOMM; /* Could not write data */
+				break;
+			case INT_EXACT:
+				dev_dbg(hcd->self.controller, "%s: transaction "
+						"error during uFrame %d\n",
+						__func__, i);
+				urb->status = -EPROTO; /* timeout, bad CRC, PID
+							  error etc. */
+				break;
+			case INT_BABBLE:
+				dev_dbg(hcd->self.controller, "%s: babble "
+						"error during uFrame %d\n",
+						__func__, i);
+				urb->status = -EOVERFLOW;
+				break;
+			}
+			dw4 >>= 3;
+		}
+
+		return PTD_STATE_URB_RETIRE;
+	}
+
+	return PTD_STATE_QTD_DONE;
+}
+
+static int check_atl_transfer(struct usb_hcd *hcd, struct ptd *ptd,
+								struct urb *urb)
+{
+	WARN_ON(!ptd);
+	if (ptd->dw3 & DW3_HALT_BIT) {
+		if (ptd->dw3 & DW3_BABBLE_BIT)
+			urb->status = -EOVERFLOW;
+		else if (FROM_DW3_CERR(ptd->dw3))
+			urb->status = -EPIPE;  /* Stall */
+		else
+			urb->status = -EPROTO; /* Unknown */
+/*
+		dev_dbg(hcd->self.controller, "%s: ptd error:\n"
+			"        dw0: %08x dw1: %08x dw2: %08x dw3: %08x\n"
+			"        dw4: %08x dw5: %08x dw6: %08x dw7: %08x\n",
+			__func__,
+			ptd->dw0, ptd->dw1, ptd->dw2, ptd->dw3,
+			ptd->dw4, ptd->dw5, ptd->dw6, ptd->dw7);
+*/
+		return PTD_STATE_URB_RETIRE;
+	}
+
+	if ((ptd->dw3 & DW3_ERROR_BIT) && (ptd->dw3 & DW3_ACTIVE_BIT)) {
+		/* Transfer Error, *but* active and no HALT -> reload */
+		dev_dbg(hcd->self.controller, "PID error; reloading ptd\n");
+		return PTD_STATE_QTD_RELOAD;
+	}
+
+	if (!FROM_DW3_NAKCOUNT(ptd->dw3) && (ptd->dw3 & DW3_ACTIVE_BIT)) {
+		/*
+		 * NAKs are handled in HW by the chip. Usually if the
+		 * device is not able to send data fast enough.
+		 * This happens mostly on slower hardware.
+		 */
+		return PTD_STATE_QTD_RELOAD;
+	}
+
+	return PTD_STATE_QTD_DONE;
+}
+
+static void handle_done_ptds(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	struct ptd ptd;
+	struct isp1760_qh *qh;
+	int slot;
+	int state;
+	struct isp1760_slotinfo *slots;
+	u32 ptd_offset;
+	struct isp1760_qtd *qtd;
+	int modified;
+	int skip_map;
+
+	skip_map = isp1760_hcd_read(hcd, HC_INT_PTD_SKIPMAP);
+	priv->int_done_map &= ~skip_map;
+	skip_map = isp1760_hcd_read(hcd, HC_ATL_PTD_SKIPMAP);
+	priv->atl_done_map &= ~skip_map;
+
+	modified = priv->int_done_map || priv->atl_done_map;
+
+	while (priv->int_done_map || priv->atl_done_map) {
+		if (priv->int_done_map) {
+			/* INT ptd */
+			slot = __ffs(priv->int_done_map);
+			priv->int_done_map &= ~(1 << slot);
+			slots = priv->int_slots;
+			/* This should not trigger, and could be removed if
+			   noone have any problems with it triggering: */
+			if (!slots[slot].qh) {
+				WARN_ON(1);
+				continue;
+			}
+			ptd_offset = INT_PTD_OFFSET;
+			ptd_read(hcd, INT_PTD_OFFSET, slot, &ptd);
+			state = check_int_transfer(hcd, &ptd,
+							slots[slot].qtd->urb);
+		} else {
+			/* ATL ptd */
+			slot = __ffs(priv->atl_done_map);
+			priv->atl_done_map &= ~(1 << slot);
+			slots = priv->atl_slots;
+			/* This should not trigger, and could be removed if
+			   noone have any problems with it triggering: */
+			if (!slots[slot].qh) {
+				WARN_ON(1);
+				continue;
+			}
+			ptd_offset = ATL_PTD_OFFSET;
+			ptd_read(hcd, ATL_PTD_OFFSET, slot, &ptd);
+			state = check_atl_transfer(hcd, &ptd,
+							slots[slot].qtd->urb);
+		}
+
+		qtd = slots[slot].qtd;
+		slots[slot].qtd = NULL;
+		qh = slots[slot].qh;
+		slots[slot].qh = NULL;
+		qh->slot = -1;
+
+		WARN_ON(qtd->status != QTD_XFER_STARTED);
+
+		switch (state) {
+		case PTD_STATE_QTD_DONE:
+			if ((usb_pipeint(qtd->urb->pipe)) &&
+				       (qtd->urb->dev->speed != USB_SPEED_HIGH))
+				qtd->actual_length =
+				       FROM_DW3_SCS_NRBYTESTRANSFERRED(ptd.dw3);
+			else
+				qtd->actual_length =
+					FROM_DW3_NRBYTESTRANSFERRED(ptd.dw3);
+
+			qtd->status = QTD_XFER_COMPLETE;
+			if (list_is_last(&qtd->qtd_list, &qh->qtd_list) ||
+			    is_short_bulk(qtd))
+				qtd = NULL;
+			else
+				qtd = list_entry(qtd->qtd_list.next,
+							typeof(*qtd), qtd_list);
+
+			qh->toggle = FROM_DW3_DATA_TOGGLE(ptd.dw3);
+			qh->ping = FROM_DW3_PING(ptd.dw3);
+			break;
+
+		case PTD_STATE_QTD_RELOAD: /* QTD_RETRY, for atls only */
+			qtd->status = QTD_PAYLOAD_ALLOC;
+			ptd.dw0 |= DW0_VALID_BIT;
+			/* RL counter = ERR counter */
+			ptd.dw3 &= ~TO_DW3_NAKCOUNT(0xf);
+			ptd.dw3 |= TO_DW3_NAKCOUNT(FROM_DW2_RL(ptd.dw2));
+			ptd.dw3 &= ~TO_DW3_CERR(3);
+			ptd.dw3 |= TO_DW3_CERR(ERR_COUNTER);
+			qh->toggle = FROM_DW3_DATA_TOGGLE(ptd.dw3);
+			qh->ping = FROM_DW3_PING(ptd.dw3);
+			break;
+
+		case PTD_STATE_URB_RETIRE:
+			qtd->status = QTD_RETIRE;
+			if ((qtd->urb->dev->speed != USB_SPEED_HIGH) &&
+					(qtd->urb->status != -EPIPE) &&
+					(qtd->urb->status != -EREMOTEIO)) {
+				qh->tt_buffer_dirty = 1;
+				if (usb_hub_clear_tt_buffer(qtd->urb))
+					/* Clear failed; let's hope things work
+					   anyway */
+					qh->tt_buffer_dirty = 0;
+			}
+			qtd = NULL;
+			qh->toggle = 0;
+			qh->ping = 0;
+			break;
+
+		default:
+			WARN_ON(1);
+			continue;
+		}
+
+		if (qtd && (qtd->status == QTD_PAYLOAD_ALLOC)) {
+			if (slots == priv->int_slots) {
+				if (state == PTD_STATE_QTD_RELOAD)
+					dev_err(hcd->self.controller,
+						"%s: PTD_STATE_QTD_RELOAD on "
+						"interrupt packet\n", __func__);
+				if (state != PTD_STATE_QTD_RELOAD)
+					create_ptd_int(qh, qtd, &ptd);
+			} else {
+				if (state != PTD_STATE_QTD_RELOAD)
+					create_ptd_atl(qh, qtd, &ptd);
+			}
+
+			start_bus_transfer(hcd, ptd_offset, slot, slots, qtd,
+				qh, &ptd);
+		}
+	}
+
+	if (modified)
+		schedule_ptds(hcd);
+}
+
+static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	irqreturn_t irqret = IRQ_NONE;
+	u32 int_reg;
+	u32 imask;
+
+	spin_lock(&priv->lock);
+
+	if (!(hcd->state & HC_STATE_RUNNING))
+		goto leave;
+
+	imask = isp1760_hcd_read(hcd, HC_INTERRUPT);
+	if (unlikely(!imask))
+		goto leave;
+
+	int_reg = priv->is_isp1763 ? ISP1763_HC_INTERRUPT :
+		ISP176x_HC_INTERRUPT;
+	isp1760_reg_write(priv->regs, int_reg, imask);
+
+	priv->int_done_map |= isp1760_hcd_read(hcd, HC_INT_PTD_DONEMAP);
+	priv->atl_done_map |= isp1760_hcd_read(hcd, HC_ATL_PTD_DONEMAP);
+
+	handle_done_ptds(hcd);
+
+	irqret = IRQ_HANDLED;
+
+leave:
+	spin_unlock(&priv->lock);
+
+	return irqret;
+}
+
+/*
+ * Workaround for problem described in chip errata 2:
+ *
+ * Sometimes interrupts are not generated when ATL (not INT?) completion occurs.
+ * One solution suggested in the errata is to use SOF interrupts _instead_of_
+ * ATL done interrupts (the "instead of" might be important since it seems
+ * enabling ATL interrupts also causes the chip to sometimes - rarely - "forget"
+ * to set the PTD's done bit in addition to not generating an interrupt!).
+ *
+ * So if we use SOF + ATL interrupts, we sometimes get stale PTDs since their
+ * done bit is not being set. This is bad - it blocks the endpoint until reboot.
+ *
+ * If we use SOF interrupts only, we get latency between ptd completion and the
+ * actual handling. This is very noticeable in testusb runs which takes several
+ * minutes longer without ATL interrupts.
+ *
+ * A better solution is to run the code below every SLOT_CHECK_PERIOD ms. If it
+ * finds active ATL slots which are older than SLOT_TIMEOUT ms, it checks the
+ * slot's ACTIVE and VALID bits. If these are not set, the ptd is considered
+ * completed and its done map bit is set.
+ *
+ * The values of SLOT_TIMEOUT and SLOT_CHECK_PERIOD have been arbitrarily chosen
+ * not to cause too much lag when this HW bug occurs, while still hopefully
+ * ensuring that the check does not falsely trigger.
+ */
+#define SLOT_TIMEOUT 300
+#define SLOT_CHECK_PERIOD 200
+static struct timer_list errata2_timer;
+static struct usb_hcd *errata2_timer_hcd;
+
+static void errata2_function(struct timer_list *unused)
+{
+	struct usb_hcd *hcd = errata2_timer_hcd;
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	const struct isp1760_memory_layout *mem = priv->memory_layout;
+	int slot;
+	struct ptd ptd;
+	unsigned long spinflags;
+
+	spin_lock_irqsave(&priv->lock, spinflags);
+
+	for (slot = 0; slot < mem->slot_num; slot++)
+		if (priv->atl_slots[slot].qh && time_after(jiffies,
+					priv->atl_slots[slot].timestamp +
+					msecs_to_jiffies(SLOT_TIMEOUT))) {
+			ptd_read(hcd, ATL_PTD_OFFSET, slot, &ptd);
+			if (!FROM_DW0_VALID(ptd.dw0) &&
+					!FROM_DW3_ACTIVE(ptd.dw3))
+				priv->atl_done_map |= 1 << slot;
+		}
+
+	if (priv->atl_done_map)
+		handle_done_ptds(hcd);
+
+	spin_unlock_irqrestore(&priv->lock, spinflags);
+
+	errata2_timer.expires = jiffies + msecs_to_jiffies(SLOT_CHECK_PERIOD);
+	add_timer(&errata2_timer);
+}
+
+static int isp1763_run(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	int retval;
+	u32 chipid_h;
+	u32 chipid_l;
+	u32 chip_rev;
+	u32 ptd_atl_int;
+	u32 ptd_iso;
+
+	hcd->uses_new_polling = 1;
+	hcd->state = HC_STATE_RUNNING;
+
+	chipid_h = isp1760_hcd_read(hcd, HC_CHIP_ID_HIGH);
+	chipid_l = isp1760_hcd_read(hcd, HC_CHIP_ID_LOW);
+	chip_rev = isp1760_hcd_read(hcd, HC_CHIP_REV);
+	dev_info(hcd->self.controller, "USB ISP %02x%02x HW rev. %d started\n",
+		 chipid_h, chipid_l, chip_rev);
+
+	isp1760_hcd_clear(hcd, ISO_BUF_FILL);
+	isp1760_hcd_clear(hcd, INT_BUF_FILL);
+	isp1760_hcd_clear(hcd, ATL_BUF_FILL);
+
+	isp1760_hcd_set(hcd, HC_ATL_PTD_SKIPMAP);
+	isp1760_hcd_set(hcd, HC_INT_PTD_SKIPMAP);
+	isp1760_hcd_set(hcd, HC_ISO_PTD_SKIPMAP);
+	ndelay(100);
+	isp1760_hcd_clear(hcd, HC_ATL_PTD_DONEMAP);
+	isp1760_hcd_clear(hcd, HC_INT_PTD_DONEMAP);
+	isp1760_hcd_clear(hcd, HC_ISO_PTD_DONEMAP);
+
+	isp1760_hcd_set(hcd, HW_OTG_DISABLE);
+	isp1760_reg_write(priv->regs, ISP1763_HC_OTG_CTRL_CLEAR, BIT(7));
+	isp1760_reg_write(priv->regs, ISP1763_HC_OTG_CTRL_CLEAR, BIT(15));
+	mdelay(10);
+
+	isp1760_hcd_set(hcd, HC_INT_IRQ_ENABLE);
+	isp1760_hcd_set(hcd, HC_ATL_IRQ_ENABLE);
+
+	isp1760_hcd_set(hcd, HW_GLOBAL_INTR_EN);
+
+	isp1760_hcd_clear(hcd, HC_ATL_IRQ_MASK_AND);
+	isp1760_hcd_clear(hcd, HC_INT_IRQ_MASK_AND);
+	isp1760_hcd_clear(hcd, HC_ISO_IRQ_MASK_AND);
+
+	isp1760_hcd_set(hcd, HC_ATL_IRQ_MASK_OR);
+	isp1760_hcd_set(hcd, HC_INT_IRQ_MASK_OR);
+	isp1760_hcd_set(hcd, HC_ISO_IRQ_MASK_OR);
+
+	ptd_atl_int = 0x8000;
+	ptd_iso = 0x0001;
+
+	isp1760_hcd_write(hcd, HC_ATL_PTD_LASTPTD, ptd_atl_int);
+	isp1760_hcd_write(hcd, HC_INT_PTD_LASTPTD, ptd_atl_int);
+	isp1760_hcd_write(hcd, HC_ISO_PTD_LASTPTD, ptd_iso);
+
+	isp1760_hcd_set(hcd, ATL_BUF_FILL);
+	isp1760_hcd_set(hcd, INT_BUF_FILL);
+
+	isp1760_hcd_clear(hcd, CMD_LRESET);
+	isp1760_hcd_clear(hcd, CMD_RESET);
+
+	retval = isp1760_hcd_set_and_wait(hcd, CMD_RUN, 250 * 1000);
+	if (retval)
+		return retval;
+
+	down_write(&ehci_cf_port_reset_rwsem);
+	retval = isp1760_hcd_set_and_wait(hcd, FLAG_CF, 250 * 1000);
+	up_write(&ehci_cf_port_reset_rwsem);
+	if (retval)
+		return retval;
+
+	return 0;
+}
+
+static int isp1760_run(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	int retval;
+	u32 chipid_h;
+	u32 chipid_l;
+	u32 chip_rev;
+	u32 ptd_atl_int;
+	u32 ptd_iso;
+
+	/*
+	 * ISP1763 have some differences in the setup and order to enable
+	 * the ports, disable otg, setup buffers, and ATL, INT, ISO status.
+	 * So, just handle it a separate sequence.
+	 */
+	if (priv->is_isp1763)
+		return isp1763_run(hcd);
+
+	hcd->uses_new_polling = 1;
+
+	hcd->state = HC_STATE_RUNNING;
+
+	/* Set PTD interrupt AND & OR maps */
+	isp1760_hcd_clear(hcd, HC_ATL_IRQ_MASK_AND);
+	isp1760_hcd_clear(hcd, HC_INT_IRQ_MASK_AND);
+	isp1760_hcd_clear(hcd, HC_ISO_IRQ_MASK_AND);
+
+	isp1760_hcd_set(hcd, HC_ATL_IRQ_MASK_OR);
+	isp1760_hcd_set(hcd, HC_INT_IRQ_MASK_OR);
+	isp1760_hcd_set(hcd, HC_ISO_IRQ_MASK_OR);
+
+	/* step 23 passed */
+
+	isp1760_hcd_set(hcd, HW_GLOBAL_INTR_EN);
+
+	isp1760_hcd_clear(hcd, CMD_LRESET);
+	isp1760_hcd_clear(hcd, CMD_RESET);
+
+	retval = isp1760_hcd_set_and_wait(hcd, CMD_RUN, 250 * 1000);
+	if (retval)
+		return retval;
+
+	/*
+	 * XXX
+	 * Spec says to write FLAG_CF as last config action, priv code grabs
+	 * the semaphore while doing so.
+	 */
+	down_write(&ehci_cf_port_reset_rwsem);
+
+	retval = isp1760_hcd_set_and_wait(hcd, FLAG_CF, 250 * 1000);
+	up_write(&ehci_cf_port_reset_rwsem);
+	if (retval)
+		return retval;
+
+	errata2_timer_hcd = hcd;
+	timer_setup(&errata2_timer, errata2_function, 0);
+	errata2_timer.expires = jiffies + msecs_to_jiffies(SLOT_CHECK_PERIOD);
+	add_timer(&errata2_timer);
+
+	chipid_h = isp1760_hcd_read(hcd, HC_CHIP_ID_HIGH);
+	chipid_l = isp1760_hcd_read(hcd, HC_CHIP_ID_LOW);
+	chip_rev = isp1760_hcd_read(hcd, HC_CHIP_REV);
+	dev_info(hcd->self.controller, "USB ISP %02x%02x HW rev. %d started\n",
+		 chipid_h, chipid_l, chip_rev);
+
+	/* PTD Register Init Part 2, Step 28 */
+
+	/* Setup registers controlling PTD checking */
+	ptd_atl_int = 0x80000000;
+	ptd_iso = 0x00000001;
+
+	isp1760_hcd_write(hcd, HC_ATL_PTD_LASTPTD, ptd_atl_int);
+	isp1760_hcd_write(hcd, HC_INT_PTD_LASTPTD, ptd_atl_int);
+	isp1760_hcd_write(hcd, HC_ISO_PTD_LASTPTD, ptd_iso);
+
+	isp1760_hcd_set(hcd, HC_ATL_PTD_SKIPMAP);
+	isp1760_hcd_set(hcd, HC_INT_PTD_SKIPMAP);
+	isp1760_hcd_set(hcd, HC_ISO_PTD_SKIPMAP);
+
+	isp1760_hcd_set(hcd, ATL_BUF_FILL);
+	isp1760_hcd_set(hcd, INT_BUF_FILL);
+
+	/* GRR this is run-once init(), being done every time the HC starts.
+	 * So long as they're part of class devices, we can't do it init()
+	 * since the class device isn't created that early.
+	 */
+	return 0;
+}
+
+static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len)
+{
+	qtd->data_buffer = databuffer;
+
+	qtd->length = len;
+
+	return qtd->length;
+}
+
+static void qtd_list_free(struct list_head *qtd_list)
+{
+	struct isp1760_qtd *qtd, *qtd_next;
+
+	list_for_each_entry_safe(qtd, qtd_next, qtd_list, qtd_list) {
+		list_del(&qtd->qtd_list);
+		qtd_free(qtd);
+	}
+}
+
+/*
+ * Packetize urb->transfer_buffer into list of packets of size wMaxPacketSize.
+ * Also calculate the PID type (SETUP/IN/OUT) for each packet.
+ */
+static void packetize_urb(struct usb_hcd *hcd,
+		struct urb *urb, struct list_head *head, gfp_t flags)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	const struct isp1760_memory_layout *mem = priv->memory_layout;
+	struct isp1760_qtd *qtd;
+	void *buf;
+	int len, maxpacketsize;
+	u8 packet_type;
+
+	/*
+	 * URBs map to sequences of QTDs:  one logical transaction
+	 */
+
+	if (!urb->transfer_buffer && urb->transfer_buffer_length) {
+		/* XXX This looks like usb storage / SCSI bug */
+		dev_err(hcd->self.controller,
+				"buf is null, dma is %08lx len is %d\n",
+				(long unsigned)urb->transfer_dma,
+				urb->transfer_buffer_length);
+		WARN_ON(1);
+	}
+
+	if (usb_pipein(urb->pipe))
+		packet_type = IN_PID;
+	else
+		packet_type = OUT_PID;
+
+	if (usb_pipecontrol(urb->pipe)) {
+		qtd = qtd_alloc(flags, urb, SETUP_PID);
+		if (!qtd)
+			goto cleanup;
+		qtd_fill(qtd, urb->setup_packet, sizeof(struct usb_ctrlrequest));
+		list_add_tail(&qtd->qtd_list, head);
+
+		/* for zero length DATA stages, STATUS is always IN */
+		if (urb->transfer_buffer_length == 0)
+			packet_type = IN_PID;
+	}
+
+	maxpacketsize = usb_maxpacket(urb->dev, urb->pipe);
+
+	/*
+	 * buffer gets wrapped in one or more qtds;
+	 * last one may be "short" (including zero len)
+	 * and may serve as a control status ack
+	 */
+	buf = urb->transfer_buffer;
+	len = urb->transfer_buffer_length;
+
+	for (;;) {
+		int this_qtd_len;
+
+		qtd = qtd_alloc(flags, urb, packet_type);
+		if (!qtd)
+			goto cleanup;
+
+		if (len > mem->blocks_size[ISP176x_BLOCK_NUM - 1])
+			this_qtd_len = mem->blocks_size[ISP176x_BLOCK_NUM - 1];
+		else
+			this_qtd_len = len;
+
+		this_qtd_len = qtd_fill(qtd, buf, this_qtd_len);
+		list_add_tail(&qtd->qtd_list, head);
+
+		len -= this_qtd_len;
+		buf += this_qtd_len;
+
+		if (len <= 0)
+			break;
+	}
+
+	/*
+	 * control requests may need a terminating data "status" ack;
+	 * bulk ones may need a terminating short packet (zero length).
+	 */
+	if (urb->transfer_buffer_length != 0) {
+		int one_more = 0;
+
+		if (usb_pipecontrol(urb->pipe)) {
+			one_more = 1;
+			if (packet_type == IN_PID)
+				packet_type = OUT_PID;
+			else
+				packet_type = IN_PID;
+		} else if (usb_pipebulk(urb->pipe) && maxpacketsize
+				&& (urb->transfer_flags & URB_ZERO_PACKET)
+				&& !(urb->transfer_buffer_length %
+							maxpacketsize)) {
+			one_more = 1;
+		}
+		if (one_more) {
+			qtd = qtd_alloc(flags, urb, packet_type);
+			if (!qtd)
+				goto cleanup;
+
+			/* never any data in such packets */
+			qtd_fill(qtd, NULL, 0);
+			list_add_tail(&qtd->qtd_list, head);
+		}
+	}
+
+	return;
+
+cleanup:
+	qtd_list_free(head);
+}
+
+static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+		gfp_t mem_flags)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	struct list_head *ep_queue;
+	struct isp1760_qh *qh, *qhit;
+	unsigned long spinflags;
+	LIST_HEAD(new_qtds);
+	int retval;
+	int qh_in_queue;
+
+	switch (usb_pipetype(urb->pipe)) {
+	case PIPE_CONTROL:
+		ep_queue = &priv->qh_list[QH_CONTROL];
+		break;
+	case PIPE_BULK:
+		ep_queue = &priv->qh_list[QH_BULK];
+		break;
+	case PIPE_INTERRUPT:
+		if (urb->interval < 0)
+			return -EINVAL;
+		/* FIXME: Check bandwidth  */
+		ep_queue = &priv->qh_list[QH_INTERRUPT];
+		break;
+	case PIPE_ISOCHRONOUS:
+		dev_err(hcd->self.controller, "%s: isochronous USB packets "
+							"not yet supported\n",
+							__func__);
+		return -EPIPE;
+	default:
+		dev_err(hcd->self.controller, "%s: unknown pipe type\n",
+							__func__);
+		return -EPIPE;
+	}
+
+	if (usb_pipein(urb->pipe))
+		urb->actual_length = 0;
+
+	packetize_urb(hcd, urb, &new_qtds, mem_flags);
+	if (list_empty(&new_qtds))
+		return -ENOMEM;
+
+	spin_lock_irqsave(&priv->lock, spinflags);
+
+	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+		retval = -ESHUTDOWN;
+		qtd_list_free(&new_qtds);
+		goto out;
+	}
+	retval = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (retval) {
+		qtd_list_free(&new_qtds);
+		goto out;
+	}
+
+	qh = urb->ep->hcpriv;
+	if (qh) {
+		qh_in_queue = 0;
+		list_for_each_entry(qhit, ep_queue, qh_list) {
+			if (qhit == qh) {
+				qh_in_queue = 1;
+				break;
+			}
+		}
+		if (!qh_in_queue)
+			list_add_tail(&qh->qh_list, ep_queue);
+	} else {
+		qh = qh_alloc(GFP_ATOMIC);
+		if (!qh) {
+			retval = -ENOMEM;
+			usb_hcd_unlink_urb_from_ep(hcd, urb);
+			qtd_list_free(&new_qtds);
+			goto out;
+		}
+		list_add_tail(&qh->qh_list, ep_queue);
+		urb->ep->hcpriv = qh;
+	}
+
+	list_splice_tail(&new_qtds, &qh->qtd_list);
+	schedule_ptds(hcd);
+
+out:
+	spin_unlock_irqrestore(&priv->lock, spinflags);
+	return retval;
+}
+
+static void kill_transfer(struct usb_hcd *hcd, struct urb *urb,
+		struct isp1760_qh *qh)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	int skip_map;
+
+	WARN_ON(qh->slot == -1);
+
+	/* We need to forcefully reclaim the slot since some transfers never
+	   return, e.g. interrupt transfers and NAKed bulk transfers. */
+	if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe)) {
+		if (qh->slot != -1) {
+			skip_map = isp1760_hcd_read(hcd, HC_ATL_PTD_SKIPMAP);
+			skip_map |= (1 << qh->slot);
+			isp1760_hcd_write(hcd, HC_ATL_PTD_SKIPMAP, skip_map);
+			ndelay(100);
+		}
+		priv->atl_slots[qh->slot].qh = NULL;
+		priv->atl_slots[qh->slot].qtd = NULL;
+	} else {
+		if (qh->slot != -1) {
+			skip_map = isp1760_hcd_read(hcd, HC_INT_PTD_SKIPMAP);
+			skip_map |= (1 << qh->slot);
+			isp1760_hcd_write(hcd, HC_INT_PTD_SKIPMAP, skip_map);
+		}
+		priv->int_slots[qh->slot].qh = NULL;
+		priv->int_slots[qh->slot].qtd = NULL;
+	}
+
+	qh->slot = -1;
+}
+
+/*
+ * Retire the qtds beginning at 'qtd' and belonging all to the same urb, killing
+ * any active transfer belonging to the urb in the process.
+ */
+static void dequeue_urb_from_qtd(struct usb_hcd *hcd, struct isp1760_qh *qh,
+						struct isp1760_qtd *qtd)
+{
+	struct urb *urb;
+	int urb_was_running;
+
+	urb = qtd->urb;
+	urb_was_running = 0;
+	list_for_each_entry_from(qtd, &qh->qtd_list, qtd_list) {
+		if (qtd->urb != urb)
+			break;
+
+		if (qtd->status >= QTD_XFER_STARTED)
+			urb_was_running = 1;
+		if (last_qtd_of_urb(qtd, qh) &&
+					(qtd->status >= QTD_XFER_COMPLETE))
+			urb_was_running = 0;
+
+		if (qtd->status == QTD_XFER_STARTED)
+			kill_transfer(hcd, urb, qh);
+		qtd->status = QTD_RETIRE;
+	}
+
+	if ((urb->dev->speed != USB_SPEED_HIGH) && urb_was_running) {
+		qh->tt_buffer_dirty = 1;
+		if (usb_hub_clear_tt_buffer(urb))
+			/* Clear failed; let's hope things work anyway */
+			qh->tt_buffer_dirty = 0;
+	}
+}
+
+static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
+		int status)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	unsigned long spinflags;
+	struct isp1760_qh *qh;
+	struct isp1760_qtd *qtd;
+	int retval = 0;
+
+	spin_lock_irqsave(&priv->lock, spinflags);
+	retval = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (retval)
+		goto out;
+
+	qh = urb->ep->hcpriv;
+	if (!qh) {
+		retval = -EINVAL;
+		goto out;
+	}
+
+	list_for_each_entry(qtd, &qh->qtd_list, qtd_list)
+		if (qtd->urb == urb) {
+			dequeue_urb_from_qtd(hcd, qh, qtd);
+			list_move(&qtd->qtd_list, &qh->qtd_list);
+			break;
+		}
+
+	urb->status = status;
+	schedule_ptds(hcd);
+
+out:
+	spin_unlock_irqrestore(&priv->lock, spinflags);
+	return retval;
+}
+
+static void isp1760_endpoint_disable(struct usb_hcd *hcd,
+		struct usb_host_endpoint *ep)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	unsigned long spinflags;
+	struct isp1760_qh *qh, *qh_iter;
+	int i;
+
+	spin_lock_irqsave(&priv->lock, spinflags);
+
+	qh = ep->hcpriv;
+	if (!qh)
+		goto out;
+
+	WARN_ON(!list_empty(&qh->qtd_list));
+
+	for (i = 0; i < QH_END; i++)
+		list_for_each_entry(qh_iter, &priv->qh_list[i], qh_list)
+			if (qh_iter == qh) {
+				list_del(&qh_iter->qh_list);
+				i = QH_END;
+				break;
+			}
+	qh_free(qh);
+	ep->hcpriv = NULL;
+
+	schedule_ptds(hcd);
+
+out:
+	spin_unlock_irqrestore(&priv->lock, spinflags);
+}
+
+static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	u32 status = 0;
+	int retval = 1;
+	unsigned long flags;
+
+	/* if !PM, root hub timers won't get shut down ... */
+	if (!HC_IS_RUNNING(hcd->state))
+		return 0;
+
+	/* init status to no-changes */
+	buf[0] = 0;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	if (isp1760_hcd_is_set(hcd, PORT_OWNER) &&
+	    isp1760_hcd_is_set(hcd, PORT_CSC)) {
+		isp1760_hcd_clear(hcd, PORT_CSC);
+		goto done;
+	}
+
+	/*
+	 * Return status information even for ports with OWNER set.
+	 * Otherwise hub_wq wouldn't see the disconnect event when a
+	 * high-speed device is switched over to the companion
+	 * controller by the user.
+	 */
+	if (isp1760_hcd_is_set(hcd, PORT_CSC) ||
+	    (isp1760_hcd_is_set(hcd, PORT_RESUME) &&
+	     time_after_eq(jiffies, priv->reset_done))) {
+		buf [0] |= 1 << (0 + 1);
+		status = STS_PCD;
+	}
+	/* FIXME autosuspend idle root hubs */
+done:
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return status ? retval : 0;
+}
+
+static void isp1760_hub_descriptor(struct isp1760_hcd *priv,
+		struct usb_hub_descriptor *desc)
+{
+	int ports;
+	u16 temp;
+
+	ports = isp1760_hcd_n_ports(priv->hcd);
+
+	desc->bDescriptorType = USB_DT_HUB;
+	/* priv 1.0, 2.3.9 says 20ms max */
+	desc->bPwrOn2PwrGood = 10;
+	desc->bHubContrCurrent = 0;
+
+	desc->bNbrPorts = ports;
+	temp = 1 + (ports / 8);
+	desc->bDescLength = 7 + 2 * temp;
+
+	/* ports removable, and usb 1.0 legacy PortPwrCtrlMask */
+	memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
+	memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
+
+	/* per-port overcurrent reporting */
+	temp = HUB_CHAR_INDV_PORT_OCPM;
+	if (isp1760_hcd_ppc_is_set(priv->hcd))
+		/* per-port power control */
+		temp |= HUB_CHAR_INDV_PORT_LPSM;
+	else
+		/* no power switching */
+		temp |= HUB_CHAR_NO_LPSM;
+	desc->wHubCharacteristics = cpu_to_le16(temp);
+}
+
+#define	PORT_WAKE_BITS	(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
+
+static void check_reset_complete(struct usb_hcd *hcd, int index)
+{
+	if (!(isp1760_hcd_is_set(hcd, PORT_CONNECT)))
+		return;
+
+	/* if reset finished and it's still not enabled -- handoff */
+	if (!isp1760_hcd_is_set(hcd, PORT_PE)) {
+		dev_info(hcd->self.controller,
+			 "port %d full speed --> companion\n", index + 1);
+
+		isp1760_hcd_set(hcd, PORT_OWNER);
+
+		isp1760_hcd_clear(hcd, PORT_CSC);
+	} else {
+		dev_info(hcd->self.controller, "port %d high speed\n",
+			 index + 1);
+	}
+
+	return;
+}
+
+static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
+		u16 wValue, u16 wIndex, char *buf, u16 wLength)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	u32 status;
+	unsigned long flags;
+	int retval = 0;
+	int ports;
+
+	ports = isp1760_hcd_n_ports(hcd);
+
+	/*
+	 * FIXME:  support SetPortFeatures USB_PORT_FEAT_INDICATOR.
+	 * HCS_INDICATOR may say we can change LEDs to off/amber/green.
+	 * (track current state ourselves) ... blink for diagnostics,
+	 * power, "this is the one", etc.  EHCI spec supports this.
+	 */
+
+	spin_lock_irqsave(&priv->lock, flags);
+	switch (typeReq) {
+	case ClearHubFeature:
+		switch (wValue) {
+		case C_HUB_LOCAL_POWER:
+		case C_HUB_OVER_CURRENT:
+			/* no hub-wide feature/status flags */
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case ClearPortFeature:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+
+		/*
+		 * Even if OWNER is set, so the port is owned by the
+		 * companion controller, hub_wq needs to be able to clear
+		 * the port-change status bits (especially
+		 * USB_PORT_STAT_C_CONNECTION).
+		 */
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			isp1760_hcd_clear(hcd, PORT_PE);
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			/* XXX error? */
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			if (isp1760_hcd_is_set(hcd, PORT_RESET))
+				goto error;
+
+			if (isp1760_hcd_is_set(hcd, PORT_SUSPEND)) {
+				if (!isp1760_hcd_is_set(hcd, PORT_PE))
+					goto error;
+				/* resume signaling for 20 msec */
+				isp1760_hcd_clear(hcd, PORT_CSC);
+				isp1760_hcd_set(hcd, PORT_RESUME);
+
+				priv->reset_done = jiffies +
+					msecs_to_jiffies(USB_RESUME_TIMEOUT);
+			}
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			/* we auto-clear this feature */
+			break;
+		case USB_PORT_FEAT_POWER:
+			if (isp1760_hcd_ppc_is_set(hcd))
+				isp1760_hcd_clear(hcd, PORT_POWER);
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			isp1760_hcd_set(hcd, PORT_CSC);
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			/* XXX error ?*/
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			/* GetPortStatus clears reset */
+			break;
+		default:
+			goto error;
+		}
+		isp1760_hcd_read(hcd, CMD_RUN);
+		break;
+	case GetHubDescriptor:
+		isp1760_hub_descriptor(priv, (struct usb_hub_descriptor *)
+			buf);
+		break;
+	case GetHubStatus:
+		/* no hub-wide feature/status flags */
+		memset(buf, 0, 4);
+		break;
+	case GetPortStatus:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		status = 0;
+
+		/* wPortChange bits */
+		if (isp1760_hcd_is_set(hcd, PORT_CSC))
+			status |= USB_PORT_STAT_C_CONNECTION << 16;
+
+		/* whoever resumes must GetPortStatus to complete it!! */
+		if (isp1760_hcd_is_set(hcd, PORT_RESUME)) {
+			dev_err(hcd->self.controller, "Port resume should be skipped.\n");
+
+			/* Remote Wakeup received? */
+			if (!priv->reset_done) {
+				/* resume signaling for 20 msec */
+				priv->reset_done = jiffies
+						+ msecs_to_jiffies(20);
+				/* check the port again */
+				mod_timer(&hcd->rh_timer, priv->reset_done);
+			}
+
+			/* resume completed? */
+			else if (time_after_eq(jiffies,
+					priv->reset_done)) {
+				status |= USB_PORT_STAT_C_SUSPEND << 16;
+				priv->reset_done = 0;
+
+				/* stop resume signaling */
+				isp1760_hcd_clear(hcd, PORT_CSC);
+
+				retval = isp1760_hcd_clear_and_wait(hcd,
+							  PORT_RESUME, 2000);
+				if (retval != 0) {
+					dev_err(hcd->self.controller,
+						"port %d resume error %d\n",
+						wIndex + 1, retval);
+					goto error;
+				}
+			}
+		}
+
+		/* whoever resets must GetPortStatus to complete it!! */
+		if (isp1760_hcd_is_set(hcd, PORT_RESET) &&
+		    time_after_eq(jiffies, priv->reset_done)) {
+			status |= USB_PORT_STAT_C_RESET << 16;
+			priv->reset_done = 0;
+
+			/* force reset to complete */
+			/* REVISIT:  some hardware needs 550+ usec to clear
+			 * this bit; seems too long to spin routinely...
+			 */
+			retval = isp1760_hcd_clear_and_wait(hcd, PORT_RESET,
+							    750);
+			if (retval != 0) {
+				dev_err(hcd->self.controller, "port %d reset error %d\n",
+					wIndex + 1, retval);
+				goto error;
+			}
+
+			/* see what we found out */
+			check_reset_complete(hcd, wIndex);
+		}
+		/*
+		 * Even if OWNER is set, there's no harm letting hub_wq
+		 * see the wPortStatus values (they should all be 0 except
+		 * for PORT_POWER anyway).
+		 */
+
+		if (isp1760_hcd_is_set(hcd, PORT_OWNER))
+			dev_err(hcd->self.controller, "PORT_OWNER is set\n");
+
+		if (isp1760_hcd_is_set(hcd, PORT_CONNECT)) {
+			status |= USB_PORT_STAT_CONNECTION;
+			/* status may be from integrated TT */
+			status |= USB_PORT_STAT_HIGH_SPEED;
+		}
+		if (isp1760_hcd_is_set(hcd, PORT_PE))
+			status |= USB_PORT_STAT_ENABLE;
+		if (isp1760_hcd_is_set(hcd, PORT_SUSPEND) &&
+		    isp1760_hcd_is_set(hcd, PORT_RESUME))
+			status |= USB_PORT_STAT_SUSPEND;
+		if (isp1760_hcd_is_set(hcd, PORT_RESET))
+			status |= USB_PORT_STAT_RESET;
+		if (isp1760_hcd_is_set(hcd, PORT_POWER))
+			status |= USB_PORT_STAT_POWER;
+
+		put_unaligned(cpu_to_le32(status), (__le32 *) buf);
+		break;
+	case SetHubFeature:
+		switch (wValue) {
+		case C_HUB_LOCAL_POWER:
+		case C_HUB_OVER_CURRENT:
+			/* no hub-wide feature/status flags */
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case SetPortFeature:
+		wIndex &= 0xff;
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+
+		if (isp1760_hcd_is_set(hcd, PORT_OWNER))
+			break;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			isp1760_hcd_set(hcd, PORT_PE);
+			break;
+
+		case USB_PORT_FEAT_SUSPEND:
+			if (!isp1760_hcd_is_set(hcd, PORT_PE) ||
+			    isp1760_hcd_is_set(hcd, PORT_RESET))
+				goto error;
+
+			isp1760_hcd_set(hcd, PORT_SUSPEND);
+			break;
+		case USB_PORT_FEAT_POWER:
+			if (isp1760_hcd_ppc_is_set(hcd))
+				isp1760_hcd_set(hcd, PORT_POWER);
+			break;
+		case USB_PORT_FEAT_RESET:
+			if (isp1760_hcd_is_set(hcd, PORT_RESUME))
+				goto error;
+			/* line status bits may report this as low speed,
+			 * which can be fine if this root hub has a
+			 * transaction translator built in.
+			 */
+			if ((isp1760_hcd_is_set(hcd, PORT_CONNECT) &&
+			     !isp1760_hcd_is_set(hcd, PORT_PE)) &&
+			    (isp1760_hcd_read(hcd, PORT_LSTATUS) == 1)) {
+				isp1760_hcd_set(hcd, PORT_OWNER);
+			} else {
+				isp1760_hcd_set(hcd, PORT_RESET);
+				isp1760_hcd_clear(hcd, PORT_PE);
+
+				/*
+				 * caller must wait, then call GetPortStatus
+				 * usb 2.0 spec says 50 ms resets on root
+				 */
+				priv->reset_done = jiffies +
+					msecs_to_jiffies(50);
+			}
+			break;
+		default:
+			goto error;
+		}
+		break;
+
+	default:
+error:
+		/* "stall" on error */
+		retval = -EPIPE;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return retval;
+}
+
+static int isp1760_get_frame(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	u32 fr;
+
+	fr = isp1760_hcd_read(hcd, HC_FRINDEX);
+	return (fr >> 3) % priv->periodic_size;
+}
+
+static void isp1760_stop(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+	del_timer(&errata2_timer);
+
+	isp1760_hub_control(hcd, ClearPortFeature, USB_PORT_FEAT_POWER,	1,
+			NULL, 0);
+	msleep(20);
+
+	spin_lock_irq(&priv->lock);
+	ehci_reset(hcd);
+	/* Disable IRQ */
+	isp1760_hcd_clear(hcd, HW_GLOBAL_INTR_EN);
+	spin_unlock_irq(&priv->lock);
+
+	isp1760_hcd_clear(hcd, FLAG_CF);
+}
+
+static void isp1760_shutdown(struct usb_hcd *hcd)
+{
+	isp1760_stop(hcd);
+
+	isp1760_hcd_clear(hcd, HW_GLOBAL_INTR_EN);
+
+	isp1760_hcd_clear(hcd, CMD_RUN);
+}
+
+static void isp1760_clear_tt_buffer_complete(struct usb_hcd *hcd,
+						struct usb_host_endpoint *ep)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	struct isp1760_qh *qh = ep->hcpriv;
+	unsigned long spinflags;
+
+	if (!qh)
+		return;
+
+	spin_lock_irqsave(&priv->lock, spinflags);
+	qh->tt_buffer_dirty = 0;
+	schedule_ptds(hcd);
+	spin_unlock_irqrestore(&priv->lock, spinflags);
+}
+
+
+static const struct hc_driver isp1760_hc_driver = {
+	.description		= "isp1760-hcd",
+	.product_desc		= "NXP ISP1760 USB Host Controller",
+	.hcd_priv_size		= sizeof(struct isp1760_hcd *),
+	.irq			= isp1760_irq,
+	.flags			= HCD_MEMORY | HCD_USB2,
+	.reset			= isp1760_hc_setup,
+	.start			= isp1760_run,
+	.stop			= isp1760_stop,
+	.shutdown		= isp1760_shutdown,
+	.urb_enqueue		= isp1760_urb_enqueue,
+	.urb_dequeue		= isp1760_urb_dequeue,
+	.endpoint_disable	= isp1760_endpoint_disable,
+	.get_frame_number	= isp1760_get_frame,
+	.hub_status_data	= isp1760_hub_status_data,
+	.hub_control		= isp1760_hub_control,
+	.clear_tt_buffer_complete	= isp1760_clear_tt_buffer_complete,
+};
+
+int __init isp1760_init_kmem_once(void)
+{
+	urb_listitem_cachep = kmem_cache_create("isp1760_urb_listitem",
+			sizeof(struct urb_listitem), 0, SLAB_TEMPORARY |
+			SLAB_MEM_SPREAD, NULL);
+
+	if (!urb_listitem_cachep)
+		return -ENOMEM;
+
+	qtd_cachep = kmem_cache_create("isp1760_qtd",
+			sizeof(struct isp1760_qtd), 0, SLAB_TEMPORARY |
+			SLAB_MEM_SPREAD, NULL);
+
+	if (!qtd_cachep)
+		goto destroy_urb_listitem;
+
+	qh_cachep = kmem_cache_create("isp1760_qh", sizeof(struct isp1760_qh),
+			0, SLAB_TEMPORARY | SLAB_MEM_SPREAD, NULL);
+
+	if (!qh_cachep)
+		goto destroy_qtd;
+
+	return 0;
+
+destroy_qtd:
+	kmem_cache_destroy(qtd_cachep);
+
+destroy_urb_listitem:
+	kmem_cache_destroy(urb_listitem_cachep);
+
+	return -ENOMEM;
+}
+
+void isp1760_deinit_kmem_cache(void)
+{
+	kmem_cache_destroy(qtd_cachep);
+	kmem_cache_destroy(qh_cachep);
+	kmem_cache_destroy(urb_listitem_cachep);
+}
+
+int isp1760_hcd_register(struct isp1760_hcd *priv, struct resource *mem,
+			 int irq, unsigned long irqflags,
+			 struct device *dev)
+{
+	const struct isp1760_memory_layout *mem_layout = priv->memory_layout;
+	struct usb_hcd *hcd;
+	int ret;
+
+	hcd = usb_create_hcd(&isp1760_hc_driver, dev, dev_name(dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	*(struct isp1760_hcd **)hcd->hcd_priv = priv;
+
+	priv->hcd = hcd;
+
+	priv->atl_slots = kcalloc(mem_layout->slot_num,
+				  sizeof(struct isp1760_slotinfo), GFP_KERNEL);
+	if (!priv->atl_slots) {
+		ret = -ENOMEM;
+		goto put_hcd;
+	}
+
+	priv->int_slots = kcalloc(mem_layout->slot_num,
+				  sizeof(struct isp1760_slotinfo), GFP_KERNEL);
+	if (!priv->int_slots) {
+		ret = -ENOMEM;
+		goto free_atl_slots;
+	}
+
+	init_memory(priv);
+
+	hcd->irq = irq;
+	hcd->rsrc_start = mem->start;
+	hcd->rsrc_len = resource_size(mem);
+
+	/* This driver doesn't support wakeup requests */
+	hcd->cant_recv_wakeups = 1;
+
+	ret = usb_add_hcd(hcd, irq, irqflags);
+	if (ret)
+		goto free_int_slots;
+
+	device_wakeup_enable(hcd->self.controller);
+
+	return 0;
+
+free_int_slots:
+	kfree(priv->int_slots);
+free_atl_slots:
+	kfree(priv->atl_slots);
+put_hcd:
+	usb_put_hcd(hcd);
+	return ret;
+}
+
+void isp1760_hcd_unregister(struct isp1760_hcd *priv)
+{
+	if (!priv->hcd)
+		return;
+
+	usb_remove_hcd(priv->hcd);
+	usb_put_hcd(priv->hcd);
+	kfree(priv->atl_slots);
+	kfree(priv->int_slots);
+}
diff --git a/drivers/usb/isp1760/isp1760-hcd.h b/drivers/usb/isp1760/isp1760-hcd.h
new file mode 100644
index 0000000000..ee3063a34d
--- /dev/null
+++ b/drivers/usb/isp1760/isp1760-hcd.h
@@ -0,0 +1,104 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ISP1760_HCD_H_
+#define _ISP1760_HCD_H_
+
+#include <linux/spinlock.h>
+#include <linux/regmap.h>
+
+#include "isp1760-regs.h"
+
+struct isp1760_qh;
+struct isp1760_qtd;
+struct resource;
+struct usb_hcd;
+
+struct isp1760_slotinfo {
+	struct isp1760_qh *qh;
+	struct isp1760_qtd *qtd;
+	unsigned long timestamp;
+};
+
+/* chip memory management */
+#define ISP176x_BLOCK_MAX (32 + 20 + 4)
+#define ISP176x_BLOCK_NUM 3
+
+struct isp1760_memory_layout {
+	unsigned int blocks[ISP176x_BLOCK_NUM];
+	unsigned int blocks_size[ISP176x_BLOCK_NUM];
+
+	unsigned int slot_num;
+	unsigned int payload_blocks;
+	unsigned int payload_area_size;
+};
+
+struct isp1760_memory_chunk {
+	unsigned int start;
+	unsigned int size;
+	unsigned int free;
+};
+
+enum isp1760_queue_head_types {
+	QH_CONTROL,
+	QH_BULK,
+	QH_INTERRUPT,
+	QH_END
+};
+
+struct isp1760_hcd {
+	struct usb_hcd		*hcd;
+
+	void __iomem		*base;
+
+	struct regmap		*regs;
+	struct regmap_field	*fields[HC_FIELD_MAX];
+
+	bool			is_isp1763;
+	const struct isp1760_memory_layout	*memory_layout;
+
+	spinlock_t		lock;
+	struct isp1760_slotinfo	*atl_slots;
+	int			atl_done_map;
+	struct isp1760_slotinfo	*int_slots;
+	int			int_done_map;
+	struct isp1760_memory_chunk memory_pool[ISP176x_BLOCK_MAX];
+	struct list_head	qh_list[QH_END];
+
+	/* periodic schedule support */
+#define	DEFAULT_I_TDPS		1024
+	unsigned		periodic_size;
+	unsigned		i_thresh;
+	unsigned long		reset_done;
+	unsigned long		next_statechange;
+};
+
+#ifdef CONFIG_USB_ISP1760_HCD
+int isp1760_hcd_register(struct isp1760_hcd *priv, struct resource *mem,
+			 int irq, unsigned long irqflags, struct device *dev);
+void isp1760_hcd_unregister(struct isp1760_hcd *priv);
+
+int isp1760_init_kmem_once(void);
+void isp1760_deinit_kmem_cache(void);
+#else
+static inline int isp1760_hcd_register(struct isp1760_hcd *priv,
+				       struct resource *mem,
+				       int irq, unsigned long irqflags,
+				       struct device *dev)
+{
+	return 0;
+}
+
+static inline void isp1760_hcd_unregister(struct isp1760_hcd *priv)
+{
+}
+
+static inline int isp1760_init_kmem_once(void)
+{
+	return 0;
+}
+
+static inline void isp1760_deinit_kmem_cache(void)
+{
+}
+#endif
+
+#endif /* _ISP1760_HCD_H_ */
diff --git a/drivers/usb/isp1760/isp1760-if.c b/drivers/usb/isp1760/isp1760-if.c
new file mode 100644
index 0000000000..fe1e398541
--- /dev/null
+++ b/drivers/usb/isp1760/isp1760-if.c
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Glue code for the ISP1760 driver and bus
+ * Currently there is support for
+ * - OpenFirmware
+ * - PCI
+ * - PDEV (generic platform device centralized driver model)
+ *
+ * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de>
+ * Copyright 2021 Linaro, Rui Miguel Silva <rui.silva@linaro.org>
+ *
+ */
+
+#include <linux/usb.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/otg.h>
+
+#include "isp1760-core.h"
+#include "isp1760-regs.h"
+
+#ifdef CONFIG_USB_PCI
+#include <linux/pci.h>
+#endif
+
+#ifdef CONFIG_USB_PCI
+static int isp1761_pci_init(struct pci_dev *dev)
+{
+	resource_size_t mem_start;
+	resource_size_t mem_length;
+	u8 __iomem *iobase;
+	u8 latency, limit;
+	int retry_count;
+	u32 reg_data;
+
+	/* Grab the PLX PCI shared memory of the ISP 1761 we need  */
+	mem_start = pci_resource_start(dev, 3);
+	mem_length = pci_resource_len(dev, 3);
+	if (mem_length < 0xffff) {
+		printk(KERN_ERR "memory length for this resource is wrong\n");
+		return -ENOMEM;
+	}
+
+	if (!request_mem_region(mem_start, mem_length, "ISP-PCI")) {
+		printk(KERN_ERR "host controller already in use\n");
+		return -EBUSY;
+	}
+
+	/* map available memory */
+	iobase = ioremap(mem_start, mem_length);
+	if (!iobase) {
+		printk(KERN_ERR "Error ioremap failed\n");
+		release_mem_region(mem_start, mem_length);
+		return -ENOMEM;
+	}
+
+	/* bad pci latencies can contribute to overruns */
+	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &latency);
+	if (latency) {
+		pci_read_config_byte(dev, PCI_MAX_LAT, &limit);
+		if (limit && limit < latency)
+			pci_write_config_byte(dev, PCI_LATENCY_TIMER, limit);
+	}
+
+	/* Try to check whether we can access Scratch Register of
+	 * Host Controller or not. The initial PCI access is retried until
+	 * local init for the PCI bridge is completed
+	 */
+	retry_count = 20;
+	reg_data = 0;
+	while ((reg_data != 0xFACE) && retry_count) {
+		/*by default host is in 16bit mode, so
+		 * io operations at this stage must be 16 bit
+		 * */
+		writel(0xface, iobase + ISP176x_HC_SCRATCH);
+		udelay(100);
+		reg_data = readl(iobase + ISP176x_HC_SCRATCH) & 0x0000ffff;
+		retry_count--;
+	}
+
+	iounmap(iobase);
+	release_mem_region(mem_start, mem_length);
+
+	/* Host Controller presence is detected by writing to scratch register
+	 * and reading back and checking the contents are same or not
+	 */
+	if (reg_data != 0xFACE) {
+		dev_err(&dev->dev, "scratch register mismatch %x\n", reg_data);
+		return -ENOMEM;
+	}
+
+	/* Grab the PLX PCI mem maped port start address we need  */
+	mem_start = pci_resource_start(dev, 0);
+	mem_length = pci_resource_len(dev, 0);
+
+	if (!request_mem_region(mem_start, mem_length, "ISP1761 IO MEM")) {
+		printk(KERN_ERR "request region #1\n");
+		return -EBUSY;
+	}
+
+	iobase = ioremap(mem_start, mem_length);
+	if (!iobase) {
+		printk(KERN_ERR "ioremap #1\n");
+		release_mem_region(mem_start, mem_length);
+		return -ENOMEM;
+	}
+
+	/* configure PLX PCI chip to pass interrupts */
+#define PLX_INT_CSR_REG 0x68
+	reg_data = readl(iobase + PLX_INT_CSR_REG);
+	reg_data |= 0x900;
+	writel(reg_data, iobase + PLX_INT_CSR_REG);
+
+	/* done with PLX IO access */
+	iounmap(iobase);
+	release_mem_region(mem_start, mem_length);
+
+	return 0;
+}
+
+static int isp1761_pci_probe(struct pci_dev *dev,
+		const struct pci_device_id *id)
+{
+	unsigned int devflags = 0;
+	int ret;
+
+	if (!dev->irq)
+		return -ENODEV;
+
+	if (pci_enable_device(dev) < 0)
+		return -ENODEV;
+
+	ret = isp1761_pci_init(dev);
+	if (ret < 0)
+		goto error;
+
+	pci_set_master(dev);
+
+	ret = isp1760_register(&dev->resource[3], dev->irq, 0, &dev->dev,
+			       devflags);
+	if (ret < 0)
+		goto error;
+
+	return 0;
+
+error:
+	pci_disable_device(dev);
+	return ret;
+}
+
+static void isp1761_pci_remove(struct pci_dev *dev)
+{
+	isp1760_unregister(&dev->dev);
+
+	pci_disable_device(dev);
+}
+
+static void isp1761_pci_shutdown(struct pci_dev *dev)
+{
+	printk(KERN_ERR "ips1761_pci_shutdown\n");
+}
+
+static const struct pci_device_id isp1760_plx[] = {
+	{
+		.class          = PCI_CLASS_BRIDGE_OTHER << 8,
+		.class_mask     = ~0,
+		.vendor		= PCI_VENDOR_ID_PLX,
+		.device		= 0x5406,
+		.subvendor	= PCI_VENDOR_ID_PLX,
+		.subdevice	= 0x9054,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, isp1760_plx);
+
+static struct pci_driver isp1761_pci_driver = {
+	.name =         "isp1760",
+	.id_table =     isp1760_plx,
+	.probe =        isp1761_pci_probe,
+	.remove =       isp1761_pci_remove,
+	.shutdown =     isp1761_pci_shutdown,
+};
+#endif
+
+static int isp1760_plat_probe(struct platform_device *pdev)
+{
+	unsigned long irqflags;
+	unsigned int devflags = 0;
+	struct resource *mem_res;
+	int irq;
+	int ret;
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+	irqflags = irq_get_trigger_type(irq);
+
+	if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
+		struct device_node *dp = pdev->dev.of_node;
+		u32 bus_width = 0;
+
+		if (of_device_is_compatible(dp, "nxp,usb-isp1761"))
+			devflags |= ISP1760_FLAG_ISP1761;
+
+		if (of_device_is_compatible(dp, "nxp,usb-isp1763"))
+			devflags |= ISP1760_FLAG_ISP1763;
+
+		/*
+		 * Some systems wire up only 8 of 16 data lines or
+		 * 16 of the 32 data lines
+		 */
+		of_property_read_u32(dp, "bus-width", &bus_width);
+		if (bus_width == 16)
+			devflags |= ISP1760_FLAG_BUS_WIDTH_16;
+		else if (bus_width == 8)
+			devflags |= ISP1760_FLAG_BUS_WIDTH_8;
+
+		if (usb_get_dr_mode(&pdev->dev) == USB_DR_MODE_PERIPHERAL)
+			devflags |= ISP1760_FLAG_PERIPHERAL_EN;
+
+		if (of_property_read_bool(dp, "analog-oc"))
+			devflags |= ISP1760_FLAG_ANALOG_OC;
+
+		if (of_property_read_bool(dp, "dack-polarity"))
+			devflags |= ISP1760_FLAG_DACK_POL_HIGH;
+
+		if (of_property_read_bool(dp, "dreq-polarity"))
+			devflags |= ISP1760_FLAG_DREQ_POL_HIGH;
+	} else {
+		pr_err("isp1760: no platform data\n");
+		return -ENXIO;
+	}
+
+	ret = isp1760_register(mem_res, irq, irqflags, &pdev->dev, devflags);
+	if (ret < 0)
+		return ret;
+
+	pr_info("ISP1760 USB device initialised\n");
+	return 0;
+}
+
+static void isp1760_plat_remove(struct platform_device *pdev)
+{
+	isp1760_unregister(&pdev->dev);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id isp1760_of_match[] = {
+	{ .compatible = "nxp,usb-isp1760", },
+	{ .compatible = "nxp,usb-isp1761", },
+	{ .compatible = "nxp,usb-isp1763", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, isp1760_of_match);
+#endif
+
+static struct platform_driver isp1760_plat_driver = {
+	.probe	= isp1760_plat_probe,
+	.remove_new = isp1760_plat_remove,
+	.driver	= {
+		.name	= "isp1760",
+		.of_match_table = of_match_ptr(isp1760_of_match),
+	},
+};
+
+static int __init isp1760_init(void)
+{
+	int ret, any_ret = -ENODEV;
+
+	isp1760_init_kmem_once();
+
+	ret = platform_driver_register(&isp1760_plat_driver);
+	if (!ret)
+		any_ret = 0;
+#ifdef CONFIG_USB_PCI
+	ret = pci_register_driver(&isp1761_pci_driver);
+	if (!ret)
+		any_ret = 0;
+#endif
+
+	if (any_ret)
+		isp1760_deinit_kmem_cache();
+	return any_ret;
+}
+module_init(isp1760_init);
+
+static void __exit isp1760_exit(void)
+{
+	platform_driver_unregister(&isp1760_plat_driver);
+#ifdef CONFIG_USB_PCI
+	pci_unregister_driver(&isp1761_pci_driver);
+#endif
+	isp1760_deinit_kmem_cache();
+}
+module_exit(isp1760_exit);
diff --git a/drivers/usb/isp1760/isp1760-regs.h b/drivers/usb/isp1760/isp1760-regs.h
new file mode 100644
index 0000000000..3a6751197e
--- /dev/null
+++ b/drivers/usb/isp1760/isp1760-regs.h
@@ -0,0 +1,308 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Driver for the NXP ISP1760 chip
+ *
+ * Copyright 2021 Linaro, Rui Miguel Silva
+ * Copyright 2014 Laurent Pinchart
+ * Copyright 2007 Sebastian Siewior
+ *
+ * Contacts:
+ *     Sebastian Siewior <bigeasy@linutronix.de>
+ *     Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *     Rui Miguel Silva <rui.silva@linaro.org>
+ */
+
+#ifndef _ISP176x_REGS_H_
+#define _ISP176x_REGS_H_
+
+/* -----------------------------------------------------------------------------
+ * Host Controller
+ */
+
+/* ISP1760/31 */
+/* EHCI capability registers */
+#define ISP176x_HC_VERSION		0x002
+#define ISP176x_HC_HCSPARAMS		0x004
+#define ISP176x_HC_HCCPARAMS		0x008
+
+/* EHCI operational registers */
+#define ISP176x_HC_USBCMD		0x020
+#define ISP176x_HC_USBSTS		0x024
+#define ISP176x_HC_FRINDEX		0x02c
+
+#define ISP176x_HC_CONFIGFLAG		0x060
+#define ISP176x_HC_PORTSC1		0x064
+
+#define ISP176x_HC_ISO_PTD_DONEMAP	0x130
+#define ISP176x_HC_ISO_PTD_SKIPMAP	0x134
+#define ISP176x_HC_ISO_PTD_LASTPTD	0x138
+#define ISP176x_HC_INT_PTD_DONEMAP	0x140
+#define ISP176x_HC_INT_PTD_SKIPMAP	0x144
+#define ISP176x_HC_INT_PTD_LASTPTD	0x148
+#define ISP176x_HC_ATL_PTD_DONEMAP	0x150
+#define ISP176x_HC_ATL_PTD_SKIPMAP	0x154
+#define ISP176x_HC_ATL_PTD_LASTPTD	0x158
+
+/* Configuration Register */
+#define ISP176x_HC_HW_MODE_CTRL		0x300
+#define ISP176x_HC_CHIP_ID		0x304
+#define ISP176x_HC_SCRATCH		0x308
+#define ISP176x_HC_RESET		0x30c
+#define ISP176x_HC_BUFFER_STATUS	0x334
+#define ISP176x_HC_MEMORY		0x33c
+
+/* Interrupt Register */
+#define ISP176x_HC_INTERRUPT		0x310
+#define ISP176x_HC_INTERRUPT_ENABLE	0x314
+#define ISP176x_HC_ISO_IRQ_MASK_OR	0x318
+#define ISP176x_HC_INT_IRQ_MASK_OR	0x31c
+#define ISP176x_HC_ATL_IRQ_MASK_OR	0x320
+#define ISP176x_HC_ISO_IRQ_MASK_AND	0x324
+#define ISP176x_HC_INT_IRQ_MASK_AND	0x328
+#define ISP176x_HC_ATL_IRQ_MASK_AND	0x32c
+
+#define ISP176x_HC_OTG_CTRL		0x374
+#define ISP176x_HC_OTG_CTRL_SET		0x374
+#define ISP176x_HC_OTG_CTRL_CLEAR	0x376
+
+enum isp176x_host_controller_fields {
+	/* HC_PORTSC1 */
+	PORT_OWNER, PORT_POWER, PORT_LSTATUS, PORT_RESET, PORT_SUSPEND,
+	PORT_RESUME, PORT_PE, PORT_CSC, PORT_CONNECT,
+	/* HC_HCSPARAMS */
+	HCS_PPC, HCS_N_PORTS,
+	/* HC_HCCPARAMS */
+	HCC_ISOC_CACHE, HCC_ISOC_THRES,
+	/* HC_USBCMD */
+	CMD_LRESET, CMD_RESET, CMD_RUN,
+	/* HC_USBSTS */
+	STS_PCD,
+	/* HC_FRINDEX */
+	HC_FRINDEX,
+	/* HC_CONFIGFLAG */
+	FLAG_CF,
+	/* ISO/INT/ATL PTD */
+	HC_ISO_PTD_DONEMAP, HC_ISO_PTD_SKIPMAP, HC_ISO_PTD_LASTPTD,
+	HC_INT_PTD_DONEMAP, HC_INT_PTD_SKIPMAP, HC_INT_PTD_LASTPTD,
+	HC_ATL_PTD_DONEMAP, HC_ATL_PTD_SKIPMAP, HC_ATL_PTD_LASTPTD,
+	/* HC_HW_MODE_CTRL */
+	ALL_ATX_RESET, HW_ANA_DIGI_OC, HW_DEV_DMA, HW_COMN_IRQ, HW_COMN_DMA,
+	HW_DATA_BUS_WIDTH, HW_DACK_POL_HIGH, HW_DREQ_POL_HIGH, HW_INTR_HIGH_ACT,
+	HW_INTF_LOCK, HW_INTR_EDGE_TRIG, HW_GLOBAL_INTR_EN,
+	/* HC_CHIP_ID */
+	HC_CHIP_ID_HIGH, HC_CHIP_ID_LOW, HC_CHIP_REV,
+	/* HC_SCRATCH */
+	HC_SCRATCH,
+	/* HC_RESET */
+	SW_RESET_RESET_ATX, SW_RESET_RESET_HC, SW_RESET_RESET_ALL,
+	/* HC_BUFFER_STATUS */
+	ISO_BUF_FILL, INT_BUF_FILL, ATL_BUF_FILL,
+	/* HC_MEMORY */
+	MEM_BANK_SEL, MEM_START_ADDR,
+	/* HC_DATA */
+	HC_DATA,
+	/* HC_INTERRUPT */
+	HC_INTERRUPT,
+	/* HC_INTERRUPT_ENABLE */
+	HC_INT_IRQ_ENABLE, HC_ATL_IRQ_ENABLE,
+	/* INTERRUPT MASKS */
+	HC_ISO_IRQ_MASK_OR, HC_INT_IRQ_MASK_OR, HC_ATL_IRQ_MASK_OR,
+	HC_ISO_IRQ_MASK_AND, HC_INT_IRQ_MASK_AND, HC_ATL_IRQ_MASK_AND,
+	/* HW_OTG_CTRL_SET */
+	HW_OTG_DISABLE, HW_SW_SEL_HC_DC, HW_VBUS_DRV, HW_SEL_CP_EXT,
+	HW_DM_PULLDOWN, HW_DP_PULLDOWN, HW_DP_PULLUP, HW_HC_2_DIS,
+	/* HW_OTG_CTRL_CLR */
+	HW_OTG_DISABLE_CLEAR, HW_SW_SEL_HC_DC_CLEAR, HW_VBUS_DRV_CLEAR,
+	HW_SEL_CP_EXT_CLEAR, HW_DM_PULLDOWN_CLEAR, HW_DP_PULLDOWN_CLEAR,
+	HW_DP_PULLUP_CLEAR, HW_HC_2_DIS_CLEAR,
+	/* Last element */
+	HC_FIELD_MAX,
+};
+
+/* ISP1763 */
+/* EHCI operational registers */
+#define ISP1763_HC_USBCMD		0x8c
+#define ISP1763_HC_USBSTS		0x90
+#define ISP1763_HC_FRINDEX		0x98
+
+#define ISP1763_HC_CONFIGFLAG		0x9c
+#define ISP1763_HC_PORTSC1		0xa0
+
+#define ISP1763_HC_ISO_PTD_DONEMAP	0xa4
+#define ISP1763_HC_ISO_PTD_SKIPMAP	0xa6
+#define ISP1763_HC_ISO_PTD_LASTPTD	0xa8
+#define ISP1763_HC_INT_PTD_DONEMAP	0xaa
+#define ISP1763_HC_INT_PTD_SKIPMAP	0xac
+#define ISP1763_HC_INT_PTD_LASTPTD	0xae
+#define ISP1763_HC_ATL_PTD_DONEMAP	0xb0
+#define ISP1763_HC_ATL_PTD_SKIPMAP	0xb2
+#define ISP1763_HC_ATL_PTD_LASTPTD	0xb4
+
+/* Configuration Register */
+#define ISP1763_HC_HW_MODE_CTRL		0xb6
+#define ISP1763_HC_CHIP_REV		0x70
+#define ISP1763_HC_CHIP_ID		0x72
+#define ISP1763_HC_SCRATCH		0x78
+#define ISP1763_HC_RESET		0xb8
+#define ISP1763_HC_BUFFER_STATUS	0xba
+#define ISP1763_HC_MEMORY		0xc4
+#define ISP1763_HC_DATA			0xc6
+
+/* Interrupt Register */
+#define ISP1763_HC_INTERRUPT		0xd4
+#define ISP1763_HC_INTERRUPT_ENABLE	0xd6
+#define ISP1763_HC_ISO_IRQ_MASK_OR	0xd8
+#define ISP1763_HC_INT_IRQ_MASK_OR	0xda
+#define ISP1763_HC_ATL_IRQ_MASK_OR	0xdc
+#define ISP1763_HC_ISO_IRQ_MASK_AND	0xde
+#define ISP1763_HC_INT_IRQ_MASK_AND	0xe0
+#define ISP1763_HC_ATL_IRQ_MASK_AND	0xe2
+
+#define ISP1763_HC_OTG_CTRL_SET		0xe4
+#define ISP1763_HC_OTG_CTRL_CLEAR	0xe6
+
+/* -----------------------------------------------------------------------------
+ * Peripheral Controller
+ */
+
+#define DC_IEPTX(n)			(1 << (11 + 2 * (n)))
+#define DC_IEPRX(n)			(1 << (10 + 2 * (n)))
+#define DC_IEPRXTX(n)			(3 << (10 + 2 * (n)))
+
+#define ISP176x_DC_CDBGMOD_ACK		BIT(6)
+#define ISP176x_DC_DDBGMODIN_ACK	BIT(4)
+#define ISP176x_DC_DDBGMODOUT_ACK	BIT(2)
+
+#define ISP176x_DC_IEP0SETUP		BIT(8)
+#define ISP176x_DC_IEVBUS		BIT(7)
+#define ISP176x_DC_IEHS_STA		BIT(5)
+#define ISP176x_DC_IERESM		BIT(4)
+#define ISP176x_DC_IESUSP		BIT(3)
+#define ISP176x_DC_IEBRST		BIT(0)
+
+#define ISP176x_HW_OTG_DISABLE_CLEAR	BIT(26)
+#define ISP176x_HW_SW_SEL_HC_DC_CLEAR	BIT(23)
+#define ISP176x_HW_VBUS_DRV_CLEAR	BIT(20)
+#define ISP176x_HW_SEL_CP_EXT_CLEAR	BIT(19)
+#define ISP176x_HW_DM_PULLDOWN_CLEAR	BIT(18)
+#define ISP176x_HW_DP_PULLDOWN_CLEAR	BIT(17)
+#define ISP176x_HW_DP_PULLUP_CLEAR	BIT(16)
+#define ISP176x_HW_OTG_DISABLE		BIT(10)
+#define ISP176x_HW_SW_SEL_HC_DC		BIT(7)
+#define ISP176x_HW_VBUS_DRV		BIT(4)
+#define ISP176x_HW_SEL_CP_EXT		BIT(3)
+#define ISP176x_HW_DM_PULLDOWN		BIT(2)
+#define ISP176x_HW_DP_PULLDOWN		BIT(1)
+#define ISP176x_HW_DP_PULLUP		BIT(0)
+
+#define ISP176x_DC_ENDPTYP_ISOC		0x01
+#define ISP176x_DC_ENDPTYP_BULK		0x02
+#define ISP176x_DC_ENDPTYP_INTERRUPT	0x03
+
+/* Initialization Registers */
+#define ISP176x_DC_ADDRESS		0x0200
+#define ISP176x_DC_MODE			0x020c
+#define ISP176x_DC_INTCONF		0x0210
+#define ISP176x_DC_DEBUG		0x0212
+#define ISP176x_DC_INTENABLE		0x0214
+
+/* Data Flow Registers */
+#define ISP176x_DC_EPMAXPKTSZ		0x0204
+#define ISP176x_DC_EPTYPE		0x0208
+
+#define ISP176x_DC_BUFLEN		0x021c
+#define ISP176x_DC_BUFSTAT		0x021e
+#define ISP176x_DC_DATAPORT		0x0220
+
+#define ISP176x_DC_CTRLFUNC		0x0228
+#define ISP176x_DC_EPINDEX		0x022c
+
+/* DMA Registers */
+#define ISP176x_DC_DMACMD		0x0230
+#define ISP176x_DC_DMATXCOUNT		0x0234
+#define ISP176x_DC_DMACONF		0x0238
+#define ISP176x_DC_DMAHW		0x023c
+#define ISP176x_DC_DMAINTREASON		0x0250
+#define ISP176x_DC_DMAINTEN		0x0254
+#define ISP176x_DC_DMAEP		0x0258
+#define ISP176x_DC_DMABURSTCOUNT	0x0264
+
+/* General Registers */
+#define ISP176x_DC_INTERRUPT		0x0218
+#define ISP176x_DC_CHIPID		0x0270
+#define ISP176x_DC_FRAMENUM		0x0274
+#define ISP176x_DC_SCRATCH		0x0278
+#define ISP176x_DC_UNLOCKDEV		0x027c
+#define ISP176x_DC_INTPULSEWIDTH	0x0280
+#define ISP176x_DC_TESTMODE		0x0284
+
+enum isp176x_device_controller_fields {
+	/* DC_ADDRESS */
+	DC_DEVEN, DC_DEVADDR,
+	/* DC_MODE */
+	DC_VBUSSTAT, DC_SFRESET, DC_GLINTENA,
+	/* DC_INTCONF */
+	DC_CDBGMOD_ACK, DC_DDBGMODIN_ACK, DC_DDBGMODOUT_ACK, DC_INTPOL,
+	/* DC_INTENABLE */
+	DC_IEPRXTX_7, DC_IEPRXTX_6, DC_IEPRXTX_5, DC_IEPRXTX_4, DC_IEPRXTX_3,
+	DC_IEPRXTX_2, DC_IEPRXTX_1, DC_IEPRXTX_0,
+	DC_IEP0SETUP, DC_IEVBUS, DC_IEHS_STA, DC_IERESM, DC_IESUSP, DC_IEBRST,
+	/* DC_EPINDEX */
+	DC_EP0SETUP, DC_ENDPIDX, DC_EPDIR,
+	/* DC_CTRLFUNC */
+	DC_CLBUF, DC_VENDP, DC_DSEN, DC_STATUS, DC_STALL,
+	/* DC_BUFLEN */
+	DC_BUFLEN,
+	/* DC_EPMAXPKTSZ */
+	DC_FFOSZ,
+	/* DC_EPTYPE */
+	DC_EPENABLE, DC_ENDPTYP,
+	/* DC_FRAMENUM */
+	DC_FRAMENUM, DC_UFRAMENUM,
+	/* DC_CHIP_ID */
+	DC_CHIP_ID_HIGH, DC_CHIP_ID_LOW,
+	/* DC_SCRATCH */
+	DC_SCRATCH,
+	/* Last element */
+	DC_FIELD_MAX,
+};
+
+/* ISP1763 */
+/* Initialization Registers */
+#define ISP1763_DC_ADDRESS		0x00
+#define ISP1763_DC_MODE			0x0c
+#define ISP1763_DC_INTCONF		0x10
+#define ISP1763_DC_INTENABLE		0x14
+
+/* Data Flow Registers */
+#define ISP1763_DC_EPMAXPKTSZ		0x04
+#define ISP1763_DC_EPTYPE		0x08
+
+#define ISP1763_DC_BUFLEN		0x1c
+#define ISP1763_DC_BUFSTAT		0x1e
+#define ISP1763_DC_DATAPORT		0x20
+
+#define ISP1763_DC_CTRLFUNC		0x28
+#define ISP1763_DC_EPINDEX		0x2c
+
+/* DMA Registers */
+#define ISP1763_DC_DMACMD		0x30
+#define ISP1763_DC_DMATXCOUNT		0x34
+#define ISP1763_DC_DMACONF		0x38
+#define ISP1763_DC_DMAHW		0x3c
+#define ISP1763_DC_DMAINTREASON		0x50
+#define ISP1763_DC_DMAINTEN		0x54
+#define ISP1763_DC_DMAEP		0x58
+#define ISP1763_DC_DMABURSTCOUNT	0x64
+
+/* General Registers */
+#define ISP1763_DC_INTERRUPT		0x18
+#define ISP1763_DC_CHIPID_LOW		0x70
+#define ISP1763_DC_CHIPID_HIGH		0x72
+#define ISP1763_DC_FRAMENUM		0x74
+#define ISP1763_DC_SCRATCH		0x78
+#define ISP1763_DC_UNLOCKDEV		0x7c
+#define ISP1763_DC_INTPULSEWIDTH	0x80
+#define ISP1763_DC_TESTMODE		0x84
+
+#endif
diff --git a/drivers/usb/isp1760/isp1760-udc.c b/drivers/usb/isp1760/isp1760-udc.c
new file mode 100644
index 0000000000..5cafd23345
--- /dev/null
+++ b/drivers/usb/isp1760/isp1760-udc.c
@@ -0,0 +1,1600 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the NXP ISP1761 device controller
+ *
+ * Copyright 2021 Linaro, Rui Miguel Silva
+ * Copyright 2014 Ideas on Board Oy
+ *
+ * Contacts:
+ *	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	Rui Miguel Silva <rui.silva@linaro.org>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/usb.h>
+
+#include "isp1760-core.h"
+#include "isp1760-regs.h"
+#include "isp1760-udc.h"
+
+#define ISP1760_VBUS_POLL_INTERVAL	msecs_to_jiffies(500)
+
+struct isp1760_request {
+	struct usb_request req;
+	struct list_head queue;
+	struct isp1760_ep *ep;
+	unsigned int packet_size;
+};
+
+static inline struct isp1760_udc *gadget_to_udc(struct usb_gadget *gadget)
+{
+	return container_of(gadget, struct isp1760_udc, gadget);
+}
+
+static inline struct isp1760_ep *ep_to_udc_ep(struct usb_ep *ep)
+{
+	return container_of(ep, struct isp1760_ep, ep);
+}
+
+static inline struct isp1760_request *req_to_udc_req(struct usb_request *req)
+{
+	return container_of(req, struct isp1760_request, req);
+}
+
+static u32 isp1760_udc_read(struct isp1760_udc *udc, u16 field)
+{
+	return isp1760_field_read(udc->fields, field);
+}
+
+static void isp1760_udc_write(struct isp1760_udc *udc, u16 field, u32 val)
+{
+	isp1760_field_write(udc->fields, field, val);
+}
+
+static u32 isp1760_udc_read_raw(struct isp1760_udc *udc, u16 reg)
+{
+	__le32 val;
+
+	regmap_raw_read(udc->regs, reg, &val, 4);
+
+	return le32_to_cpu(val);
+}
+
+static u16 isp1760_udc_read_raw16(struct isp1760_udc *udc, u16 reg)
+{
+	__le16 val;
+
+	regmap_raw_read(udc->regs, reg, &val, 2);
+
+	return le16_to_cpu(val);
+}
+
+static void isp1760_udc_write_raw(struct isp1760_udc *udc, u16 reg, u32 val)
+{
+	__le32 val_le = cpu_to_le32(val);
+
+	regmap_raw_write(udc->regs, reg, &val_le, 4);
+}
+
+static void isp1760_udc_write_raw16(struct isp1760_udc *udc, u16 reg, u16 val)
+{
+	__le16 val_le = cpu_to_le16(val);
+
+	regmap_raw_write(udc->regs, reg, &val_le, 2);
+}
+
+static void isp1760_udc_set(struct isp1760_udc *udc, u32 field)
+{
+	isp1760_udc_write(udc, field, 0xFFFFFFFF);
+}
+
+static void isp1760_udc_clear(struct isp1760_udc *udc, u32 field)
+{
+	isp1760_udc_write(udc, field, 0);
+}
+
+static bool isp1760_udc_is_set(struct isp1760_udc *udc, u32 field)
+{
+	return !!isp1760_udc_read(udc, field);
+}
+/* -----------------------------------------------------------------------------
+ * Endpoint Management
+ */
+
+static struct isp1760_ep *isp1760_udc_find_ep(struct isp1760_udc *udc,
+					      u16 index)
+{
+	unsigned int i;
+
+	if (index == 0)
+		return &udc->ep[0];
+
+	for (i = 1; i < ARRAY_SIZE(udc->ep); ++i) {
+		if (udc->ep[i].addr == index)
+			return udc->ep[i].desc ? &udc->ep[i] : NULL;
+	}
+
+	return NULL;
+}
+
+static void __isp1760_udc_select_ep(struct isp1760_udc *udc,
+				    struct isp1760_ep *ep, int dir)
+{
+	isp1760_udc_write(udc, DC_ENDPIDX, ep->addr & USB_ENDPOINT_NUMBER_MASK);
+
+	if (dir == USB_DIR_IN)
+		isp1760_udc_set(udc, DC_EPDIR);
+	else
+		isp1760_udc_clear(udc, DC_EPDIR);
+}
+
+/**
+ * isp1760_udc_select_ep - Select an endpoint for register access
+ * @ep: The endpoint
+ * @udc: Reference to the device controller
+ *
+ * The ISP1761 endpoint registers are banked. This function selects the target
+ * endpoint for banked register access. The selection remains valid until the
+ * next call to this function, the next direct access to the EPINDEX register
+ * or the next reset, whichever comes first.
+ *
+ * Called with the UDC spinlock held.
+ */
+static void isp1760_udc_select_ep(struct isp1760_udc *udc,
+				  struct isp1760_ep *ep)
+{
+	__isp1760_udc_select_ep(udc, ep, ep->addr & USB_ENDPOINT_DIR_MASK);
+}
+
+/* Called with the UDC spinlock held. */
+static void isp1760_udc_ctrl_send_status(struct isp1760_ep *ep, int dir)
+{
+	struct isp1760_udc *udc = ep->udc;
+
+	/*
+	 * Proceed to the status stage. The status stage data packet flows in
+	 * the direction opposite to the data stage data packets, we thus need
+	 * to select the OUT/IN endpoint for IN/OUT transfers.
+	 */
+	if (dir == USB_DIR_IN)
+		isp1760_udc_clear(udc, DC_EPDIR);
+	else
+		isp1760_udc_set(udc, DC_EPDIR);
+
+	isp1760_udc_write(udc, DC_ENDPIDX, 1);
+	isp1760_udc_set(udc, DC_STATUS);
+
+	/*
+	 * The hardware will terminate the request automatically and go back to
+	 * the setup stage without notifying us.
+	 */
+	udc->ep0_state = ISP1760_CTRL_SETUP;
+}
+
+/* Called without the UDC spinlock held. */
+static void isp1760_udc_request_complete(struct isp1760_ep *ep,
+					 struct isp1760_request *req,
+					 int status)
+{
+	struct isp1760_udc *udc = ep->udc;
+	unsigned long flags;
+
+	dev_dbg(ep->udc->isp->dev, "completing request %p with status %d\n",
+		req, status);
+
+	req->ep = NULL;
+	req->req.status = status;
+	req->req.complete(&ep->ep, &req->req);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/*
+	 * When completing control OUT requests, move to the status stage after
+	 * calling the request complete callback. This gives the gadget an
+	 * opportunity to stall the control transfer if needed.
+	 */
+	if (status == 0 && ep->addr == 0 && udc->ep0_dir == USB_DIR_OUT)
+		isp1760_udc_ctrl_send_status(ep, USB_DIR_OUT);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+}
+
+static void isp1760_udc_ctrl_send_stall(struct isp1760_ep *ep)
+{
+	struct isp1760_udc *udc = ep->udc;
+	unsigned long flags;
+
+	dev_dbg(ep->udc->isp->dev, "%s(ep%02x)\n", __func__, ep->addr);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* Stall both the IN and OUT endpoints. */
+	__isp1760_udc_select_ep(udc, ep, USB_DIR_OUT);
+	isp1760_udc_set(udc, DC_STALL);
+	__isp1760_udc_select_ep(udc, ep, USB_DIR_IN);
+	isp1760_udc_set(udc, DC_STALL);
+
+	/* A protocol stall completes the control transaction. */
+	udc->ep0_state = ISP1760_CTRL_SETUP;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+}
+
+/* -----------------------------------------------------------------------------
+ * Data Endpoints
+ */
+
+/* Called with the UDC spinlock held. */
+static bool isp1760_udc_receive(struct isp1760_ep *ep,
+				struct isp1760_request *req)
+{
+	struct isp1760_udc *udc = ep->udc;
+	unsigned int len;
+	u32 *buf;
+	int i;
+
+	isp1760_udc_select_ep(udc, ep);
+	len = isp1760_udc_read(udc, DC_BUFLEN);
+
+	dev_dbg(udc->isp->dev, "%s: received %u bytes (%u/%u done)\n",
+		__func__, len, req->req.actual, req->req.length);
+
+	len = min(len, req->req.length - req->req.actual);
+
+	if (!len) {
+		/*
+		 * There's no data to be read from the FIFO, acknowledge the RX
+		 * interrupt by clearing the buffer.
+		 *
+		 * TODO: What if another packet arrives in the meantime ? The
+		 * datasheet doesn't clearly document how this should be
+		 * handled.
+		 */
+		isp1760_udc_set(udc, DC_CLBUF);
+		return false;
+	}
+
+	buf = req->req.buf + req->req.actual;
+
+	/*
+	 * Make sure not to read more than one extra byte, otherwise data from
+	 * the next packet might be removed from the FIFO.
+	 */
+	for (i = len; i > 2; i -= 4, ++buf)
+		*buf = isp1760_udc_read_raw(udc, ISP176x_DC_DATAPORT);
+	if (i > 0)
+		*(u16 *)buf = isp1760_udc_read_raw16(udc, ISP176x_DC_DATAPORT);
+
+	req->req.actual += len;
+
+	/*
+	 * TODO: The short_not_ok flag isn't supported yet, but isn't used by
+	 * any gadget driver either.
+	 */
+
+	dev_dbg(udc->isp->dev,
+		"%s: req %p actual/length %u/%u maxpacket %u packet size %u\n",
+		__func__, req, req->req.actual, req->req.length, ep->maxpacket,
+		len);
+
+	ep->rx_pending = false;
+
+	/*
+	 * Complete the request if all data has been received or if a short
+	 * packet has been received.
+	 */
+	if (req->req.actual == req->req.length || len < ep->maxpacket) {
+		list_del(&req->queue);
+		return true;
+	}
+
+	return false;
+}
+
+static void isp1760_udc_transmit(struct isp1760_ep *ep,
+				 struct isp1760_request *req)
+{
+	struct isp1760_udc *udc = ep->udc;
+	u32 *buf = req->req.buf + req->req.actual;
+	int i;
+
+	req->packet_size = min(req->req.length - req->req.actual,
+			       ep->maxpacket);
+
+	dev_dbg(udc->isp->dev, "%s: transferring %u bytes (%u/%u done)\n",
+		__func__, req->packet_size, req->req.actual,
+		req->req.length);
+
+	__isp1760_udc_select_ep(udc, ep, USB_DIR_IN);
+
+	if (req->packet_size)
+		isp1760_udc_write(udc, DC_BUFLEN, req->packet_size);
+
+	/*
+	 * Make sure not to write more than one extra byte, otherwise extra data
+	 * will stay in the FIFO and will be transmitted during the next control
+	 * request. The endpoint control CLBUF bit is supposed to allow flushing
+	 * the FIFO for this kind of conditions, but doesn't seem to work.
+	 */
+	for (i = req->packet_size; i > 2; i -= 4, ++buf)
+		isp1760_udc_write_raw(udc, ISP176x_DC_DATAPORT, *buf);
+	if (i > 0)
+		isp1760_udc_write_raw16(udc, ISP176x_DC_DATAPORT, *(u16 *)buf);
+
+	if (ep->addr == 0)
+		isp1760_udc_set(udc, DC_DSEN);
+	if (!req->packet_size)
+		isp1760_udc_set(udc, DC_VENDP);
+}
+
+static void isp1760_ep_rx_ready(struct isp1760_ep *ep)
+{
+	struct isp1760_udc *udc = ep->udc;
+	struct isp1760_request *req;
+	bool complete;
+
+	spin_lock(&udc->lock);
+
+	if (ep->addr == 0 && udc->ep0_state != ISP1760_CTRL_DATA_OUT) {
+		spin_unlock(&udc->lock);
+		dev_dbg(udc->isp->dev, "%s: invalid ep0 state %u\n", __func__,
+			udc->ep0_state);
+		return;
+	}
+
+	if (ep->addr != 0 && !ep->desc) {
+		spin_unlock(&udc->lock);
+		dev_dbg(udc->isp->dev, "%s: ep%02x is disabled\n", __func__,
+			ep->addr);
+		return;
+	}
+
+	if (list_empty(&ep->queue)) {
+		ep->rx_pending = true;
+		spin_unlock(&udc->lock);
+		dev_dbg(udc->isp->dev, "%s: ep%02x (%p) has no request queued\n",
+			__func__, ep->addr, ep);
+		return;
+	}
+
+	req = list_first_entry(&ep->queue, struct isp1760_request,
+			       queue);
+	complete = isp1760_udc_receive(ep, req);
+
+	spin_unlock(&udc->lock);
+
+	if (complete)
+		isp1760_udc_request_complete(ep, req, 0);
+}
+
+static void isp1760_ep_tx_complete(struct isp1760_ep *ep)
+{
+	struct isp1760_udc *udc = ep->udc;
+	struct isp1760_request *complete = NULL;
+	struct isp1760_request *req;
+	bool need_zlp;
+
+	spin_lock(&udc->lock);
+
+	if (ep->addr == 0 && udc->ep0_state != ISP1760_CTRL_DATA_IN) {
+		spin_unlock(&udc->lock);
+		dev_dbg(udc->isp->dev, "TX IRQ: invalid endpoint state %u\n",
+			udc->ep0_state);
+		return;
+	}
+
+	if (list_empty(&ep->queue)) {
+		/*
+		 * This can happen for the control endpoint when the reply to
+		 * the GET_STATUS IN control request is sent directly by the
+		 * setup IRQ handler. Just proceed to the status stage.
+		 */
+		if (ep->addr == 0) {
+			isp1760_udc_ctrl_send_status(ep, USB_DIR_IN);
+			spin_unlock(&udc->lock);
+			return;
+		}
+
+		spin_unlock(&udc->lock);
+		dev_dbg(udc->isp->dev, "%s: ep%02x has no request queued\n",
+			__func__, ep->addr);
+		return;
+	}
+
+	req = list_first_entry(&ep->queue, struct isp1760_request,
+			       queue);
+	req->req.actual += req->packet_size;
+
+	need_zlp = req->req.actual == req->req.length &&
+		   !(req->req.length % ep->maxpacket) &&
+		   req->packet_size && req->req.zero;
+
+	dev_dbg(udc->isp->dev,
+		"TX IRQ: req %p actual/length %u/%u maxpacket %u packet size %u zero %u need zlp %u\n",
+		 req, req->req.actual, req->req.length, ep->maxpacket,
+		 req->packet_size, req->req.zero, need_zlp);
+
+	/*
+	 * Complete the request if all data has been sent and we don't need to
+	 * transmit a zero length packet.
+	 */
+	if (req->req.actual == req->req.length && !need_zlp) {
+		complete = req;
+		list_del(&req->queue);
+
+		if (ep->addr == 0)
+			isp1760_udc_ctrl_send_status(ep, USB_DIR_IN);
+
+		if (!list_empty(&ep->queue))
+			req = list_first_entry(&ep->queue,
+					       struct isp1760_request, queue);
+		else
+			req = NULL;
+	}
+
+	/*
+	 * Transmit the next packet or start the next request, if any.
+	 *
+	 * TODO: If the endpoint is stalled the next request shouldn't be
+	 * started, but what about the next packet ?
+	 */
+	if (req)
+		isp1760_udc_transmit(ep, req);
+
+	spin_unlock(&udc->lock);
+
+	if (complete)
+		isp1760_udc_request_complete(ep, complete, 0);
+}
+
+static int __isp1760_udc_set_halt(struct isp1760_ep *ep, bool halt)
+{
+	struct isp1760_udc *udc = ep->udc;
+
+	dev_dbg(udc->isp->dev, "%s: %s halt on ep%02x\n", __func__,
+		halt ? "set" : "clear", ep->addr);
+
+	if (ep->desc && usb_endpoint_xfer_isoc(ep->desc)) {
+		dev_dbg(udc->isp->dev, "%s: ep%02x is isochronous\n", __func__,
+			ep->addr);
+		return -EINVAL;
+	}
+
+	isp1760_udc_select_ep(udc, ep);
+
+	if (halt)
+		isp1760_udc_set(udc, DC_STALL);
+	else
+		isp1760_udc_clear(udc, DC_STALL);
+
+	if (ep->addr == 0) {
+		/* When halting the control endpoint, stall both IN and OUT. */
+		__isp1760_udc_select_ep(udc, ep, USB_DIR_IN);
+		if (halt)
+			isp1760_udc_set(udc, DC_STALL);
+		else
+			isp1760_udc_clear(udc, DC_STALL);
+	} else if (!halt) {
+		/* Reset the data PID by cycling the endpoint enable bit. */
+		isp1760_udc_clear(udc, DC_EPENABLE);
+		isp1760_udc_set(udc, DC_EPENABLE);
+
+		/*
+		 * Disabling the endpoint emptied the transmit FIFO, fill it
+		 * again if a request is pending.
+		 *
+		 * TODO: Does the gadget framework require synchronizatino with
+		 * the TX IRQ handler ?
+		 */
+		if ((ep->addr & USB_DIR_IN) && !list_empty(&ep->queue)) {
+			struct isp1760_request *req;
+
+			req = list_first_entry(&ep->queue,
+					       struct isp1760_request, queue);
+			isp1760_udc_transmit(ep, req);
+		}
+	}
+
+	ep->halted = halt;
+
+	return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * Control Endpoint
+ */
+
+static int isp1760_udc_get_status(struct isp1760_udc *udc,
+				  const struct usb_ctrlrequest *req)
+{
+	struct isp1760_ep *ep;
+	u16 status;
+
+	if (req->wLength != cpu_to_le16(2) || req->wValue != cpu_to_le16(0))
+		return -EINVAL;
+
+	switch (req->bRequestType) {
+	case USB_DIR_IN | USB_RECIP_DEVICE:
+		status = udc->devstatus;
+		break;
+
+	case USB_DIR_IN | USB_RECIP_INTERFACE:
+		status = 0;
+		break;
+
+	case USB_DIR_IN | USB_RECIP_ENDPOINT:
+		ep = isp1760_udc_find_ep(udc, le16_to_cpu(req->wIndex));
+		if (!ep)
+			return -EINVAL;
+
+		status = 0;
+		if (ep->halted)
+			status |= 1 << USB_ENDPOINT_HALT;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	isp1760_udc_set(udc, DC_EPDIR);
+	isp1760_udc_write(udc, DC_ENDPIDX, 1);
+
+	isp1760_udc_write(udc, DC_BUFLEN, 2);
+
+	isp1760_udc_write_raw16(udc, ISP176x_DC_DATAPORT, status);
+
+	isp1760_udc_set(udc, DC_DSEN);
+
+	dev_dbg(udc->isp->dev, "%s: status 0x%04x\n", __func__, status);
+
+	return 0;
+}
+
+static int isp1760_udc_set_address(struct isp1760_udc *udc, u16 addr)
+{
+	if (addr > 127) {
+		dev_dbg(udc->isp->dev, "invalid device address %u\n", addr);
+		return -EINVAL;
+	}
+
+	if (udc->gadget.state != USB_STATE_DEFAULT &&
+	    udc->gadget.state != USB_STATE_ADDRESS) {
+		dev_dbg(udc->isp->dev, "can't set address in state %u\n",
+			udc->gadget.state);
+		return -EINVAL;
+	}
+
+	usb_gadget_set_state(&udc->gadget, addr ? USB_STATE_ADDRESS :
+			     USB_STATE_DEFAULT);
+
+	isp1760_udc_write(udc, DC_DEVADDR, addr);
+	isp1760_udc_set(udc, DC_DEVEN);
+
+	spin_lock(&udc->lock);
+	isp1760_udc_ctrl_send_status(&udc->ep[0], USB_DIR_OUT);
+	spin_unlock(&udc->lock);
+
+	return 0;
+}
+
+static bool isp1760_ep0_setup_standard(struct isp1760_udc *udc,
+				       struct usb_ctrlrequest *req)
+{
+	bool stall;
+
+	switch (req->bRequest) {
+	case USB_REQ_GET_STATUS:
+		return isp1760_udc_get_status(udc, req);
+
+	case USB_REQ_CLEAR_FEATURE:
+		switch (req->bRequestType) {
+		case USB_DIR_OUT | USB_RECIP_DEVICE: {
+			/* TODO: Handle remote wakeup feature. */
+			return true;
+		}
+
+		case USB_DIR_OUT | USB_RECIP_ENDPOINT: {
+			u16 index = le16_to_cpu(req->wIndex);
+			struct isp1760_ep *ep;
+
+			if (req->wLength != cpu_to_le16(0) ||
+			    req->wValue != cpu_to_le16(USB_ENDPOINT_HALT))
+				return true;
+
+			ep = isp1760_udc_find_ep(udc, index);
+			if (!ep)
+				return true;
+
+			spin_lock(&udc->lock);
+
+			/*
+			 * If the endpoint is wedged only the gadget can clear
+			 * the halt feature. Pretend success in that case, but
+			 * keep the endpoint halted.
+			 */
+			if (!ep->wedged)
+				stall = __isp1760_udc_set_halt(ep, false);
+			else
+				stall = false;
+
+			if (!stall)
+				isp1760_udc_ctrl_send_status(&udc->ep[0],
+							     USB_DIR_OUT);
+
+			spin_unlock(&udc->lock);
+			return stall;
+		}
+
+		default:
+			return true;
+		}
+		break;
+
+	case USB_REQ_SET_FEATURE:
+		switch (req->bRequestType) {
+		case USB_DIR_OUT | USB_RECIP_DEVICE: {
+			/* TODO: Handle remote wakeup and test mode features */
+			return true;
+		}
+
+		case USB_DIR_OUT | USB_RECIP_ENDPOINT: {
+			u16 index = le16_to_cpu(req->wIndex);
+			struct isp1760_ep *ep;
+
+			if (req->wLength != cpu_to_le16(0) ||
+			    req->wValue != cpu_to_le16(USB_ENDPOINT_HALT))
+				return true;
+
+			ep = isp1760_udc_find_ep(udc, index);
+			if (!ep)
+				return true;
+
+			spin_lock(&udc->lock);
+
+			stall = __isp1760_udc_set_halt(ep, true);
+			if (!stall)
+				isp1760_udc_ctrl_send_status(&udc->ep[0],
+							     USB_DIR_OUT);
+
+			spin_unlock(&udc->lock);
+			return stall;
+		}
+
+		default:
+			return true;
+		}
+		break;
+
+	case USB_REQ_SET_ADDRESS:
+		if (req->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
+			return true;
+
+		return isp1760_udc_set_address(udc, le16_to_cpu(req->wValue));
+
+	case USB_REQ_SET_CONFIGURATION:
+		if (req->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
+			return true;
+
+		if (udc->gadget.state != USB_STATE_ADDRESS &&
+		    udc->gadget.state != USB_STATE_CONFIGURED)
+			return true;
+
+		stall = udc->driver->setup(&udc->gadget, req) < 0;
+		if (stall)
+			return true;
+
+		usb_gadget_set_state(&udc->gadget, req->wValue ?
+				     USB_STATE_CONFIGURED : USB_STATE_ADDRESS);
+
+		/*
+		 * SET_CONFIGURATION (and SET_INTERFACE) must reset the halt
+		 * feature on all endpoints. There is however no need to do so
+		 * explicitly here as the gadget driver will disable and
+		 * reenable endpoints, clearing the halt feature.
+		 */
+		return false;
+
+	default:
+		return udc->driver->setup(&udc->gadget, req) < 0;
+	}
+}
+
+static void isp1760_ep0_setup(struct isp1760_udc *udc)
+{
+	union {
+		struct usb_ctrlrequest r;
+		u32 data[2];
+	} req;
+	unsigned int count;
+	bool stall = false;
+
+	spin_lock(&udc->lock);
+
+	isp1760_udc_set(udc, DC_EP0SETUP);
+
+	count = isp1760_udc_read(udc, DC_BUFLEN);
+	if (count != sizeof(req)) {
+		spin_unlock(&udc->lock);
+
+		dev_err(udc->isp->dev, "invalid length %u for setup packet\n",
+			count);
+
+		isp1760_udc_ctrl_send_stall(&udc->ep[0]);
+		return;
+	}
+
+	req.data[0] = isp1760_udc_read_raw(udc, ISP176x_DC_DATAPORT);
+	req.data[1] = isp1760_udc_read_raw(udc, ISP176x_DC_DATAPORT);
+
+	if (udc->ep0_state != ISP1760_CTRL_SETUP) {
+		spin_unlock(&udc->lock);
+		dev_dbg(udc->isp->dev, "unexpected SETUP packet\n");
+		return;
+	}
+
+	/* Move to the data stage. */
+	if (!req.r.wLength)
+		udc->ep0_state = ISP1760_CTRL_STATUS;
+	else if (req.r.bRequestType & USB_DIR_IN)
+		udc->ep0_state = ISP1760_CTRL_DATA_IN;
+	else
+		udc->ep0_state = ISP1760_CTRL_DATA_OUT;
+
+	udc->ep0_dir = req.r.bRequestType & USB_DIR_IN;
+	udc->ep0_length = le16_to_cpu(req.r.wLength);
+
+	spin_unlock(&udc->lock);
+
+	dev_dbg(udc->isp->dev,
+		"%s: bRequestType 0x%02x bRequest 0x%02x wValue 0x%04x wIndex 0x%04x wLength 0x%04x\n",
+		__func__, req.r.bRequestType, req.r.bRequest,
+		le16_to_cpu(req.r.wValue), le16_to_cpu(req.r.wIndex),
+		le16_to_cpu(req.r.wLength));
+
+	if ((req.r.bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
+		stall = isp1760_ep0_setup_standard(udc, &req.r);
+	else
+		stall = udc->driver->setup(&udc->gadget, &req.r) < 0;
+
+	if (stall)
+		isp1760_udc_ctrl_send_stall(&udc->ep[0]);
+}
+
+/* -----------------------------------------------------------------------------
+ * Gadget Endpoint Operations
+ */
+
+static int isp1760_ep_enable(struct usb_ep *ep,
+			     const struct usb_endpoint_descriptor *desc)
+{
+	struct isp1760_ep *uep = ep_to_udc_ep(ep);
+	struct isp1760_udc *udc = uep->udc;
+	unsigned long flags;
+	unsigned int type;
+
+	dev_dbg(uep->udc->isp->dev, "%s\n", __func__);
+
+	/*
+	 * Validate the descriptor. The control endpoint can't be enabled
+	 * manually.
+	 */
+	if (desc->bDescriptorType != USB_DT_ENDPOINT ||
+	    desc->bEndpointAddress == 0 ||
+	    desc->bEndpointAddress != uep->addr ||
+	    le16_to_cpu(desc->wMaxPacketSize) > ep->maxpacket) {
+		dev_dbg(udc->isp->dev,
+			"%s: invalid descriptor type %u addr %02x ep addr %02x max packet size %u/%u\n",
+			__func__, desc->bDescriptorType,
+			desc->bEndpointAddress, uep->addr,
+			le16_to_cpu(desc->wMaxPacketSize), ep->maxpacket);
+		return -EINVAL;
+	}
+
+	switch (usb_endpoint_type(desc)) {
+	case USB_ENDPOINT_XFER_ISOC:
+		type = ISP176x_DC_ENDPTYP_ISOC;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		type = ISP176x_DC_ENDPTYP_BULK;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		type = ISP176x_DC_ENDPTYP_INTERRUPT;
+		break;
+	case USB_ENDPOINT_XFER_CONTROL:
+	default:
+		dev_dbg(udc->isp->dev, "%s: control endpoints unsupported\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	uep->desc = desc;
+	uep->maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	uep->rx_pending = false;
+	uep->halted = false;
+	uep->wedged = false;
+
+	isp1760_udc_select_ep(udc, uep);
+
+	isp1760_udc_write(udc, DC_FFOSZ, uep->maxpacket);
+	isp1760_udc_write(udc, DC_BUFLEN, uep->maxpacket);
+
+	isp1760_udc_write(udc, DC_ENDPTYP, type);
+	isp1760_udc_set(udc, DC_EPENABLE);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int isp1760_ep_disable(struct usb_ep *ep)
+{
+	struct isp1760_ep *uep = ep_to_udc_ep(ep);
+	struct isp1760_udc *udc = uep->udc;
+	struct isp1760_request *req, *nreq;
+	LIST_HEAD(req_list);
+	unsigned long flags;
+
+	dev_dbg(udc->isp->dev, "%s\n", __func__);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (!uep->desc) {
+		dev_dbg(udc->isp->dev, "%s: endpoint not enabled\n", __func__);
+		spin_unlock_irqrestore(&udc->lock, flags);
+		return -EINVAL;
+	}
+
+	uep->desc = NULL;
+	uep->maxpacket = 0;
+
+	isp1760_udc_select_ep(udc, uep);
+	isp1760_udc_clear(udc, DC_EPENABLE);
+	isp1760_udc_clear(udc, DC_ENDPTYP);
+
+	/* TODO Synchronize with the IRQ handler */
+
+	list_splice_init(&uep->queue, &req_list);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	list_for_each_entry_safe(req, nreq, &req_list, queue) {
+		list_del(&req->queue);
+		isp1760_udc_request_complete(uep, req, -ESHUTDOWN);
+	}
+
+	return 0;
+}
+
+static struct usb_request *isp1760_ep_alloc_request(struct usb_ep *ep,
+						    gfp_t gfp_flags)
+{
+	struct isp1760_request *req;
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req)
+		return NULL;
+
+	return &req->req;
+}
+
+static void isp1760_ep_free_request(struct usb_ep *ep, struct usb_request *_req)
+{
+	struct isp1760_request *req = req_to_udc_req(_req);
+
+	kfree(req);
+}
+
+static int isp1760_ep_queue(struct usb_ep *ep, struct usb_request *_req,
+			    gfp_t gfp_flags)
+{
+	struct isp1760_request *req = req_to_udc_req(_req);
+	struct isp1760_ep *uep = ep_to_udc_ep(ep);
+	struct isp1760_udc *udc = uep->udc;
+	bool complete = false;
+	unsigned long flags;
+	int ret = 0;
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	dev_dbg(udc->isp->dev,
+		"%s: req %p (%u bytes%s) ep %p(0x%02x)\n", __func__, _req,
+		_req->length, _req->zero ? " (zlp)" : "", uep, uep->addr);
+
+	req->ep = uep;
+
+	if (uep->addr == 0) {
+		if (_req->length != udc->ep0_length &&
+		    udc->ep0_state != ISP1760_CTRL_DATA_IN) {
+			dev_dbg(udc->isp->dev,
+				"%s: invalid length %u for req %p\n",
+				__func__, _req->length, req);
+			ret = -EINVAL;
+			goto done;
+		}
+
+		switch (udc->ep0_state) {
+		case ISP1760_CTRL_DATA_IN:
+			dev_dbg(udc->isp->dev, "%s: transmitting req %p\n",
+				__func__, req);
+
+			list_add_tail(&req->queue, &uep->queue);
+			isp1760_udc_transmit(uep, req);
+			break;
+
+		case ISP1760_CTRL_DATA_OUT:
+			list_add_tail(&req->queue, &uep->queue);
+			__isp1760_udc_select_ep(udc, uep, USB_DIR_OUT);
+			isp1760_udc_set(udc, DC_DSEN);
+			break;
+
+		case ISP1760_CTRL_STATUS:
+			complete = true;
+			break;
+
+		default:
+			dev_dbg(udc->isp->dev, "%s: invalid ep0 state\n",
+				__func__);
+			ret = -EINVAL;
+			break;
+		}
+	} else if (uep->desc) {
+		bool empty = list_empty(&uep->queue);
+
+		list_add_tail(&req->queue, &uep->queue);
+		if ((uep->addr & USB_DIR_IN) && !uep->halted && empty)
+			isp1760_udc_transmit(uep, req);
+		else if (!(uep->addr & USB_DIR_IN) && uep->rx_pending)
+			complete = isp1760_udc_receive(uep, req);
+	} else {
+		dev_dbg(udc->isp->dev,
+			"%s: can't queue request to disabled ep%02x\n",
+			__func__, uep->addr);
+		ret = -ESHUTDOWN;
+	}
+
+done:
+	if (ret < 0)
+		req->ep = NULL;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (complete)
+		isp1760_udc_request_complete(uep, req, 0);
+
+	return ret;
+}
+
+static int isp1760_ep_dequeue(struct usb_ep *ep, struct usb_request *_req)
+{
+	struct isp1760_request *req = req_to_udc_req(_req);
+	struct isp1760_ep *uep = ep_to_udc_ep(ep);
+	struct isp1760_udc *udc = uep->udc;
+	unsigned long flags;
+
+	dev_dbg(uep->udc->isp->dev, "%s(ep%02x)\n", __func__, uep->addr);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (req->ep != uep)
+		req = NULL;
+	else
+		list_del(&req->queue);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (!req)
+		return -EINVAL;
+
+	isp1760_udc_request_complete(uep, req, -ECONNRESET);
+	return 0;
+}
+
+static int __isp1760_ep_set_halt(struct isp1760_ep *uep, bool stall, bool wedge)
+{
+	struct isp1760_udc *udc = uep->udc;
+	int ret;
+
+	if (!uep->addr) {
+		/*
+		 * Halting the control endpoint is only valid as a delayed error
+		 * response to a SETUP packet. Make sure EP0 is in the right
+		 * stage and that the gadget isn't trying to clear the halt
+		 * condition.
+		 */
+		if (WARN_ON(udc->ep0_state == ISP1760_CTRL_SETUP || !stall ||
+			     wedge)) {
+			return -EINVAL;
+		}
+	}
+
+	if (uep->addr && !uep->desc) {
+		dev_dbg(udc->isp->dev, "%s: ep%02x is disabled\n", __func__,
+			uep->addr);
+		return -EINVAL;
+	}
+
+	if (uep->addr & USB_DIR_IN) {
+		/* Refuse to halt IN endpoints with active transfers. */
+		if (!list_empty(&uep->queue)) {
+			dev_dbg(udc->isp->dev,
+				"%s: ep%02x has request pending\n", __func__,
+				uep->addr);
+			return -EAGAIN;
+		}
+	}
+
+	ret = __isp1760_udc_set_halt(uep, stall);
+	if (ret < 0)
+		return ret;
+
+	if (!uep->addr) {
+		/*
+		 * Stalling EP0 completes the control transaction, move back to
+		 * the SETUP state.
+		 */
+		udc->ep0_state = ISP1760_CTRL_SETUP;
+		return 0;
+	}
+
+	if (wedge)
+		uep->wedged = true;
+	else if (!stall)
+		uep->wedged = false;
+
+	return 0;
+}
+
+static int isp1760_ep_set_halt(struct usb_ep *ep, int value)
+{
+	struct isp1760_ep *uep = ep_to_udc_ep(ep);
+	unsigned long flags;
+	int ret;
+
+	dev_dbg(uep->udc->isp->dev, "%s: %s halt on ep%02x\n", __func__,
+		value ? "set" : "clear", uep->addr);
+
+	spin_lock_irqsave(&uep->udc->lock, flags);
+	ret = __isp1760_ep_set_halt(uep, value, false);
+	spin_unlock_irqrestore(&uep->udc->lock, flags);
+
+	return ret;
+}
+
+static int isp1760_ep_set_wedge(struct usb_ep *ep)
+{
+	struct isp1760_ep *uep = ep_to_udc_ep(ep);
+	unsigned long flags;
+	int ret;
+
+	dev_dbg(uep->udc->isp->dev, "%s: set wedge on ep%02x)\n", __func__,
+		uep->addr);
+
+	spin_lock_irqsave(&uep->udc->lock, flags);
+	ret = __isp1760_ep_set_halt(uep, true, true);
+	spin_unlock_irqrestore(&uep->udc->lock, flags);
+
+	return ret;
+}
+
+static void isp1760_ep_fifo_flush(struct usb_ep *ep)
+{
+	struct isp1760_ep *uep = ep_to_udc_ep(ep);
+	struct isp1760_udc *udc = uep->udc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	isp1760_udc_select_ep(udc, uep);
+
+	/*
+	 * Set the CLBUF bit twice to flush both buffers in case double
+	 * buffering is enabled.
+	 */
+	isp1760_udc_set(udc, DC_CLBUF);
+	isp1760_udc_set(udc, DC_CLBUF);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+}
+
+static const struct usb_ep_ops isp1760_ep_ops = {
+	.enable = isp1760_ep_enable,
+	.disable = isp1760_ep_disable,
+	.alloc_request = isp1760_ep_alloc_request,
+	.free_request = isp1760_ep_free_request,
+	.queue = isp1760_ep_queue,
+	.dequeue = isp1760_ep_dequeue,
+	.set_halt = isp1760_ep_set_halt,
+	.set_wedge = isp1760_ep_set_wedge,
+	.fifo_flush = isp1760_ep_fifo_flush,
+};
+
+/* -----------------------------------------------------------------------------
+ * Device States
+ */
+
+/* Called with the UDC spinlock held. */
+static void isp1760_udc_connect(struct isp1760_udc *udc)
+{
+	usb_gadget_set_state(&udc->gadget, USB_STATE_POWERED);
+	mod_timer(&udc->vbus_timer, jiffies + ISP1760_VBUS_POLL_INTERVAL);
+}
+
+/* Called with the UDC spinlock held. */
+static void isp1760_udc_disconnect(struct isp1760_udc *udc)
+{
+	if (udc->gadget.state < USB_STATE_POWERED)
+		return;
+
+	dev_dbg(udc->isp->dev, "Device disconnected in state %u\n",
+		 udc->gadget.state);
+
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	usb_gadget_set_state(&udc->gadget, USB_STATE_ATTACHED);
+
+	if (udc->driver->disconnect)
+		udc->driver->disconnect(&udc->gadget);
+
+	del_timer(&udc->vbus_timer);
+
+	/* TODO Reset all endpoints ? */
+}
+
+static void isp1760_udc_init_hw(struct isp1760_udc *udc)
+{
+	u32 intconf = udc->is_isp1763 ? ISP1763_DC_INTCONF : ISP176x_DC_INTCONF;
+	u32 intena = udc->is_isp1763 ? ISP1763_DC_INTENABLE :
+						ISP176x_DC_INTENABLE;
+
+	/*
+	 * The device controller currently shares its interrupt with the host
+	 * controller, the DC_IRQ polarity and signaling mode are ignored. Set
+	 * the to active-low level-triggered.
+	 *
+	 * Configure the control, in and out pipes to generate interrupts on
+	 * ACK tokens only (and NYET for the out pipe). The default
+	 * configuration also generates an interrupt on the first NACK token.
+	 */
+	isp1760_reg_write(udc->regs, intconf,
+			  ISP176x_DC_CDBGMOD_ACK | ISP176x_DC_DDBGMODIN_ACK |
+			  ISP176x_DC_DDBGMODOUT_ACK);
+
+	isp1760_reg_write(udc->regs, intena, DC_IEPRXTX(7) |
+			  DC_IEPRXTX(6) | DC_IEPRXTX(5) | DC_IEPRXTX(4) |
+			  DC_IEPRXTX(3) | DC_IEPRXTX(2) | DC_IEPRXTX(1) |
+			  DC_IEPRXTX(0) | ISP176x_DC_IEP0SETUP |
+			  ISP176x_DC_IEVBUS | ISP176x_DC_IERESM |
+			  ISP176x_DC_IESUSP | ISP176x_DC_IEHS_STA |
+			  ISP176x_DC_IEBRST);
+
+	if (udc->connected)
+		isp1760_set_pullup(udc->isp, true);
+
+	isp1760_udc_set(udc, DC_DEVEN);
+}
+
+static void isp1760_udc_reset(struct isp1760_udc *udc)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/*
+	 * The bus reset has reset most registers to their default value,
+	 * reinitialize the UDC hardware.
+	 */
+	isp1760_udc_init_hw(udc);
+
+	udc->ep0_state = ISP1760_CTRL_SETUP;
+	udc->gadget.speed = USB_SPEED_FULL;
+
+	usb_gadget_udc_reset(&udc->gadget, udc->driver);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+}
+
+static void isp1760_udc_suspend(struct isp1760_udc *udc)
+{
+	if (udc->gadget.state < USB_STATE_DEFAULT)
+		return;
+
+	if (udc->driver->suspend)
+		udc->driver->suspend(&udc->gadget);
+}
+
+static void isp1760_udc_resume(struct isp1760_udc *udc)
+{
+	if (udc->gadget.state < USB_STATE_DEFAULT)
+		return;
+
+	if (udc->driver->resume)
+		udc->driver->resume(&udc->gadget);
+}
+
+/* -----------------------------------------------------------------------------
+ * Gadget Operations
+ */
+
+static int isp1760_udc_get_frame(struct usb_gadget *gadget)
+{
+	struct isp1760_udc *udc = gadget_to_udc(gadget);
+
+	return isp1760_udc_read(udc, DC_FRAMENUM);
+}
+
+static int isp1760_udc_wakeup(struct usb_gadget *gadget)
+{
+	struct isp1760_udc *udc = gadget_to_udc(gadget);
+
+	dev_dbg(udc->isp->dev, "%s\n", __func__);
+	return -ENOTSUPP;
+}
+
+static int isp1760_udc_set_selfpowered(struct usb_gadget *gadget,
+				       int is_selfpowered)
+{
+	struct isp1760_udc *udc = gadget_to_udc(gadget);
+
+	if (is_selfpowered)
+		udc->devstatus |= 1 << USB_DEVICE_SELF_POWERED;
+	else
+		udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED);
+
+	return 0;
+}
+
+static int isp1760_udc_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct isp1760_udc *udc = gadget_to_udc(gadget);
+
+	isp1760_set_pullup(udc->isp, is_on);
+	udc->connected = is_on;
+
+	return 0;
+}
+
+static int isp1760_udc_start(struct usb_gadget *gadget,
+			     struct usb_gadget_driver *driver)
+{
+	struct isp1760_udc *udc = gadget_to_udc(gadget);
+	unsigned long flags;
+
+	/* The hardware doesn't support low speed. */
+	if (driver->max_speed < USB_SPEED_FULL) {
+		dev_err(udc->isp->dev, "Invalid gadget driver\n");
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (udc->driver) {
+		dev_err(udc->isp->dev, "UDC already has a gadget driver\n");
+		spin_unlock_irqrestore(&udc->lock, flags);
+		return -EBUSY;
+	}
+
+	udc->driver = driver;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	dev_dbg(udc->isp->dev, "starting UDC with driver %s\n",
+		driver->function);
+
+	udc->devstatus = 0;
+	udc->connected = true;
+
+	usb_gadget_set_state(&udc->gadget, USB_STATE_ATTACHED);
+
+	/* DMA isn't supported yet, don't enable the DMA clock. */
+	isp1760_udc_set(udc, DC_GLINTENA);
+
+	isp1760_udc_init_hw(udc);
+
+	dev_dbg(udc->isp->dev, "UDC started with driver %s\n",
+		driver->function);
+
+	return 0;
+}
+
+static int isp1760_udc_stop(struct usb_gadget *gadget)
+{
+	struct isp1760_udc *udc = gadget_to_udc(gadget);
+	u32 mode_reg = udc->is_isp1763 ? ISP1763_DC_MODE : ISP176x_DC_MODE;
+	unsigned long flags;
+
+	dev_dbg(udc->isp->dev, "%s\n", __func__);
+
+	del_timer_sync(&udc->vbus_timer);
+
+	isp1760_reg_write(udc->regs, mode_reg, 0);
+
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->driver = NULL;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops isp1760_udc_ops = {
+	.get_frame = isp1760_udc_get_frame,
+	.wakeup = isp1760_udc_wakeup,
+	.set_selfpowered = isp1760_udc_set_selfpowered,
+	.pullup = isp1760_udc_pullup,
+	.udc_start = isp1760_udc_start,
+	.udc_stop = isp1760_udc_stop,
+};
+
+/* -----------------------------------------------------------------------------
+ * Interrupt Handling
+ */
+
+static u32 isp1760_udc_irq_get_status(struct isp1760_udc *udc)
+{
+	u32 status;
+
+	if (udc->is_isp1763) {
+		status = isp1760_reg_read(udc->regs, ISP1763_DC_INTERRUPT)
+			& isp1760_reg_read(udc->regs, ISP1763_DC_INTENABLE);
+		isp1760_reg_write(udc->regs, ISP1763_DC_INTERRUPT, status);
+	} else {
+		status = isp1760_reg_read(udc->regs, ISP176x_DC_INTERRUPT)
+			& isp1760_reg_read(udc->regs, ISP176x_DC_INTENABLE);
+		isp1760_reg_write(udc->regs, ISP176x_DC_INTERRUPT, status);
+	}
+
+	return status;
+}
+
+static irqreturn_t isp1760_udc_irq(int irq, void *dev)
+{
+	struct isp1760_udc *udc = dev;
+	unsigned int i;
+	u32 status;
+
+	status = isp1760_udc_irq_get_status(udc);
+
+	if (status & ISP176x_DC_IEVBUS) {
+		dev_dbg(udc->isp->dev, "%s(VBUS)\n", __func__);
+		/* The VBUS interrupt is only triggered when VBUS appears. */
+		spin_lock(&udc->lock);
+		isp1760_udc_connect(udc);
+		spin_unlock(&udc->lock);
+	}
+
+	if (status & ISP176x_DC_IEBRST) {
+		dev_dbg(udc->isp->dev, "%s(BRST)\n", __func__);
+
+		isp1760_udc_reset(udc);
+	}
+
+	for (i = 0; i <= 7; ++i) {
+		struct isp1760_ep *ep = &udc->ep[i*2];
+
+		if (status & DC_IEPTX(i)) {
+			dev_dbg(udc->isp->dev, "%s(EPTX%u)\n", __func__, i);
+			isp1760_ep_tx_complete(ep);
+		}
+
+		if (status & DC_IEPRX(i)) {
+			dev_dbg(udc->isp->dev, "%s(EPRX%u)\n", __func__, i);
+			isp1760_ep_rx_ready(i ? ep - 1 : ep);
+		}
+	}
+
+	if (status & ISP176x_DC_IEP0SETUP) {
+		dev_dbg(udc->isp->dev, "%s(EP0SETUP)\n", __func__);
+
+		isp1760_ep0_setup(udc);
+	}
+
+	if (status & ISP176x_DC_IERESM) {
+		dev_dbg(udc->isp->dev, "%s(RESM)\n", __func__);
+		isp1760_udc_resume(udc);
+	}
+
+	if (status & ISP176x_DC_IESUSP) {
+		dev_dbg(udc->isp->dev, "%s(SUSP)\n", __func__);
+
+		spin_lock(&udc->lock);
+		if (!isp1760_udc_is_set(udc, DC_VBUSSTAT))
+			isp1760_udc_disconnect(udc);
+		else
+			isp1760_udc_suspend(udc);
+		spin_unlock(&udc->lock);
+	}
+
+	if (status & ISP176x_DC_IEHS_STA) {
+		dev_dbg(udc->isp->dev, "%s(HS_STA)\n", __func__);
+		udc->gadget.speed = USB_SPEED_HIGH;
+	}
+
+	return status ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static void isp1760_udc_vbus_poll(struct timer_list *t)
+{
+	struct isp1760_udc *udc = from_timer(udc, t, vbus_timer);
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (!(isp1760_udc_is_set(udc, DC_VBUSSTAT)))
+		isp1760_udc_disconnect(udc);
+	else if (udc->gadget.state >= USB_STATE_POWERED)
+		mod_timer(&udc->vbus_timer,
+			  jiffies + ISP1760_VBUS_POLL_INTERVAL);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+}
+
+/* -----------------------------------------------------------------------------
+ * Registration
+ */
+
+static void isp1760_udc_init_eps(struct isp1760_udc *udc)
+{
+	unsigned int i;
+
+	INIT_LIST_HEAD(&udc->gadget.ep_list);
+
+	for (i = 0; i < ARRAY_SIZE(udc->ep); ++i) {
+		struct isp1760_ep *ep = &udc->ep[i];
+		unsigned int ep_num = (i + 1) / 2;
+		bool is_in = !(i & 1);
+
+		ep->udc = udc;
+
+		INIT_LIST_HEAD(&ep->queue);
+
+		ep->addr = (ep_num && is_in ? USB_DIR_IN : USB_DIR_OUT)
+			 | ep_num;
+		ep->desc = NULL;
+
+		sprintf(ep->name, "ep%u%s", ep_num,
+			ep_num ? (is_in ? "in" : "out") : "");
+
+		ep->ep.ops = &isp1760_ep_ops;
+		ep->ep.name = ep->name;
+
+		/*
+		 * Hardcode the maximum packet sizes for now, to 64 bytes for
+		 * the control endpoint and 512 bytes for all other endpoints.
+		 * This fits in the 8kB FIFO without double-buffering.
+		 */
+		if (ep_num == 0) {
+			usb_ep_set_maxpacket_limit(&ep->ep, 64);
+			ep->ep.caps.type_control = true;
+			ep->ep.caps.dir_in = true;
+			ep->ep.caps.dir_out = true;
+			ep->maxpacket = 64;
+			udc->gadget.ep0 = &ep->ep;
+		} else {
+			usb_ep_set_maxpacket_limit(&ep->ep, 512);
+			ep->ep.caps.type_iso = true;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+			ep->maxpacket = 0;
+			list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+		}
+
+		if (is_in)
+			ep->ep.caps.dir_in = true;
+		else
+			ep->ep.caps.dir_out = true;
+	}
+}
+
+static int isp1760_udc_init(struct isp1760_udc *udc)
+{
+	u32 mode_reg = udc->is_isp1763 ? ISP1763_DC_MODE : ISP176x_DC_MODE;
+	u16 scratch;
+	u32 chipid;
+
+	/*
+	 * Check that the controller is present by writing to the scratch
+	 * register, modifying the bus pattern by reading from the chip ID
+	 * register, and reading the scratch register value back. The chip ID
+	 * and scratch register contents must match the expected values.
+	 */
+	isp1760_udc_write(udc, DC_SCRATCH, 0xbabe);
+	chipid = isp1760_udc_read(udc, DC_CHIP_ID_HIGH) << 16;
+	chipid |= isp1760_udc_read(udc, DC_CHIP_ID_LOW);
+	scratch = isp1760_udc_read(udc, DC_SCRATCH);
+
+	if (scratch != 0xbabe) {
+		dev_err(udc->isp->dev,
+			"udc: scratch test failed (0x%04x/0x%08x)\n",
+			scratch, chipid);
+		return -ENODEV;
+	}
+
+	if (chipid != 0x00011582 && chipid != 0x00158210 &&
+	    chipid != 0x00176320) {
+		dev_err(udc->isp->dev, "udc: invalid chip ID 0x%08x\n", chipid);
+		return -ENODEV;
+	}
+
+	/* Reset the device controller. */
+	isp1760_udc_set(udc, DC_SFRESET);
+	usleep_range(10000, 11000);
+	isp1760_reg_write(udc->regs, mode_reg, 0);
+	usleep_range(10000, 11000);
+
+	return 0;
+}
+
+int isp1760_udc_register(struct isp1760_device *isp, int irq,
+			 unsigned long irqflags)
+{
+	struct isp1760_udc *udc = &isp->udc;
+	int ret;
+
+	udc->irq = -1;
+	udc->isp = isp;
+
+	spin_lock_init(&udc->lock);
+	timer_setup(&udc->vbus_timer, isp1760_udc_vbus_poll, 0);
+
+	ret = isp1760_udc_init(udc);
+	if (ret < 0)
+		return ret;
+
+	udc->irqname = kasprintf(GFP_KERNEL, "%s (udc)", dev_name(isp->dev));
+	if (!udc->irqname)
+		return -ENOMEM;
+
+	ret = request_irq(irq, isp1760_udc_irq, IRQF_SHARED | irqflags,
+			  udc->irqname, udc);
+	if (ret < 0)
+		goto error;
+
+	udc->irq = irq;
+
+	/*
+	 * Initialize the gadget static fields and register its device. Gadget
+	 * fields that vary during the life time of the gadget are initialized
+	 * by the UDC core.
+	 */
+	udc->gadget.ops = &isp1760_udc_ops;
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->gadget.max_speed = USB_SPEED_HIGH;
+	udc->gadget.name = "isp1761_udc";
+
+	isp1760_udc_init_eps(udc);
+
+	ret = usb_add_gadget_udc(isp->dev, &udc->gadget);
+	if (ret < 0)
+		goto error;
+
+	return 0;
+
+error:
+	if (udc->irq >= 0)
+		free_irq(udc->irq, udc);
+	kfree(udc->irqname);
+
+	return ret;
+}
+
+void isp1760_udc_unregister(struct isp1760_device *isp)
+{
+	struct isp1760_udc *udc = &isp->udc;
+
+	if (!udc->isp)
+		return;
+
+	usb_del_gadget_udc(&udc->gadget);
+
+	free_irq(udc->irq, udc);
+	kfree(udc->irqname);
+}
diff --git a/drivers/usb/isp1760/isp1760-udc.h b/drivers/usb/isp1760/isp1760-udc.h
new file mode 100644
index 0000000000..22044e86bc
--- /dev/null
+++ b/drivers/usb/isp1760/isp1760-udc.h
@@ -0,0 +1,108 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Driver for the NXP ISP1761 device controller
+ *
+ * Copyright 2021 Linaro, Rui Miguel Silva
+ * Copyright 2014 Ideas on Board Oy
+ *
+ * Contacts:
+ *	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	Rui Miguel Silva <rui.silva@linaro.org>
+ */
+
+#ifndef _ISP1760_UDC_H_
+#define _ISP1760_UDC_H_
+
+#include <linux/ioport.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/usb/gadget.h>
+
+#include "isp1760-regs.h"
+
+struct isp1760_device;
+struct isp1760_udc;
+
+enum isp1760_ctrl_state {
+	ISP1760_CTRL_SETUP,		/* Waiting for a SETUP transaction */
+	ISP1760_CTRL_DATA_IN,		/* Setup received, data IN stage */
+	ISP1760_CTRL_DATA_OUT,		/* Setup received, data OUT stage */
+	ISP1760_CTRL_STATUS,		/* 0-length request in status stage */
+};
+
+struct isp1760_ep {
+	struct isp1760_udc *udc;
+	struct usb_ep ep;
+
+	struct list_head queue;
+
+	unsigned int addr;
+	unsigned int maxpacket;
+	char name[7];
+
+	const struct usb_endpoint_descriptor *desc;
+
+	bool rx_pending;
+	bool halted;
+	bool wedged;
+};
+
+/**
+ * struct isp1760_udc - UDC state information
+ * irq: IRQ number
+ * irqname: IRQ name (as passed to request_irq)
+ * regs: regmap for UDC registers
+ * driver: Gadget driver
+ * gadget: Gadget device
+ * lock: Protects driver, vbus_timer, ep, ep0_*, DC_EPINDEX register
+ * ep: Array of endpoints
+ * ep0_state: Control request state for endpoint 0
+ * ep0_dir: Direction of the current control request
+ * ep0_length: Length of the current control request
+ * connected: Tracks gadget driver bus connection state
+ */
+struct isp1760_udc {
+	struct isp1760_device *isp;
+
+	int irq;
+	char *irqname;
+
+	struct regmap *regs;
+	struct regmap_field *fields[DC_FIELD_MAX];
+
+	struct usb_gadget_driver *driver;
+	struct usb_gadget gadget;
+
+	spinlock_t lock;
+	struct timer_list vbus_timer;
+
+	struct isp1760_ep ep[15];
+
+	enum isp1760_ctrl_state ep0_state;
+	u8 ep0_dir;
+	u16 ep0_length;
+
+	bool connected;
+	bool is_isp1763;
+
+	unsigned int devstatus;
+};
+
+#ifdef CONFIG_USB_ISP1761_UDC
+int isp1760_udc_register(struct isp1760_device *isp, int irq,
+			 unsigned long irqflags);
+void isp1760_udc_unregister(struct isp1760_device *isp);
+#else
+static inline int isp1760_udc_register(struct isp1760_device *isp, int irq,
+				       unsigned long irqflags)
+{
+	return 0;
+}
+
+static inline void isp1760_udc_unregister(struct isp1760_device *isp)
+{
+}
+#endif
+
+#endif