summaryrefslogtreecommitdiffstats
path: root/drivers/usb/musb/da8xx.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/usb/musb/da8xx.c
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/usb/musb/da8xx.c')
-rw-r--r--drivers/usb/musb/da8xx.c638
1 files changed, 638 insertions, 0 deletions
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
new file mode 100644
index 0000000000..912e32b78a
--- /dev/null
+++ b/drivers/usb/musb/da8xx.c
@@ -0,0 +1,638 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Texas Instruments DA8xx/OMAP-L1x "glue layer"
+ *
+ * Copyright (c) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * Based on the DaVinci "glue layer" code.
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * DT support
+ * Copyright (c) 2016 Petr Kulhavy <petr@barix.com>
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/usb_phy_generic.h>
+
+#include "musb_core.h"
+
+/*
+ * DA8XX specific definitions
+ */
+
+/* USB 2.0 OTG module registers */
+#define DA8XX_USB_REVISION_REG 0x00
+#define DA8XX_USB_CTRL_REG 0x04
+#define DA8XX_USB_STAT_REG 0x08
+#define DA8XX_USB_EMULATION_REG 0x0c
+#define DA8XX_USB_SRP_FIX_TIME_REG 0x18
+#define DA8XX_USB_INTR_SRC_REG 0x20
+#define DA8XX_USB_INTR_SRC_SET_REG 0x24
+#define DA8XX_USB_INTR_SRC_CLEAR_REG 0x28
+#define DA8XX_USB_INTR_MASK_REG 0x2c
+#define DA8XX_USB_INTR_MASK_SET_REG 0x30
+#define DA8XX_USB_INTR_MASK_CLEAR_REG 0x34
+#define DA8XX_USB_INTR_SRC_MASKED_REG 0x38
+#define DA8XX_USB_END_OF_INTR_REG 0x3c
+#define DA8XX_USB_GENERIC_RNDIS_EP_SIZE_REG(n) (0x50 + (((n) - 1) << 2))
+
+/* Control register bits */
+#define DA8XX_SOFT_RESET_MASK 1
+
+#define DA8XX_USB_TX_EP_MASK 0x1f /* EP0 + 4 Tx EPs */
+#define DA8XX_USB_RX_EP_MASK 0x1e /* 4 Rx EPs */
+
+/* USB interrupt register bits */
+#define DA8XX_INTR_USB_SHIFT 16
+#define DA8XX_INTR_USB_MASK (0x1ff << DA8XX_INTR_USB_SHIFT) /* 8 Mentor */
+ /* interrupts and DRVVBUS interrupt */
+#define DA8XX_INTR_DRVVBUS 0x100
+#define DA8XX_INTR_RX_SHIFT 8
+#define DA8XX_INTR_RX_MASK (DA8XX_USB_RX_EP_MASK << DA8XX_INTR_RX_SHIFT)
+#define DA8XX_INTR_TX_SHIFT 0
+#define DA8XX_INTR_TX_MASK (DA8XX_USB_TX_EP_MASK << DA8XX_INTR_TX_SHIFT)
+
+#define DA8XX_MENTOR_CORE_OFFSET 0x400
+
+struct da8xx_glue {
+ struct device *dev;
+ struct platform_device *musb;
+ struct platform_device *usb_phy;
+ struct clk *clk;
+ struct phy *phy;
+};
+
+/*
+ * Because we don't set CTRL.UINT, it's "important" to:
+ * - not read/write INTRUSB/INTRUSBE (except during
+ * initial setup, as a workaround);
+ * - use INTSET/INTCLR instead.
+ */
+
+/**
+ * da8xx_musb_enable - enable interrupts
+ */
+static void da8xx_musb_enable(struct musb *musb)
+{
+ void __iomem *reg_base = musb->ctrl_base;
+ u32 mask;
+
+ /* Workaround: setup IRQs through both register sets. */
+ mask = ((musb->epmask & DA8XX_USB_TX_EP_MASK) << DA8XX_INTR_TX_SHIFT) |
+ ((musb->epmask & DA8XX_USB_RX_EP_MASK) << DA8XX_INTR_RX_SHIFT) |
+ DA8XX_INTR_USB_MASK;
+ musb_writel(reg_base, DA8XX_USB_INTR_MASK_SET_REG, mask);
+
+ /* Force the DRVVBUS IRQ so we can start polling for ID change. */
+ musb_writel(reg_base, DA8XX_USB_INTR_SRC_SET_REG,
+ DA8XX_INTR_DRVVBUS << DA8XX_INTR_USB_SHIFT);
+}
+
+/**
+ * da8xx_musb_disable - disable HDRC and flush interrupts
+ */
+static void da8xx_musb_disable(struct musb *musb)
+{
+ void __iomem *reg_base = musb->ctrl_base;
+
+ musb_writel(reg_base, DA8XX_USB_INTR_MASK_CLEAR_REG,
+ DA8XX_INTR_USB_MASK |
+ DA8XX_INTR_TX_MASK | DA8XX_INTR_RX_MASK);
+ musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0);
+}
+
+#define portstate(stmt) stmt
+
+static void da8xx_musb_set_vbus(struct musb *musb, int is_on)
+{
+ WARN_ON(is_on && is_peripheral_active(musb));
+}
+
+#define POLL_SECONDS 2
+
+static void otg_timer(struct timer_list *t)
+{
+ struct musb *musb = from_timer(musb, t, dev_timer);
+ void __iomem *mregs = musb->mregs;
+ u8 devctl;
+ unsigned long flags;
+
+ /*
+ * We poll because DaVinci's won't expose several OTG-critical
+ * status change events (from the transceiver) otherwise.
+ */
+ devctl = musb_readb(mregs, MUSB_DEVCTL);
+ dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
+ usb_otg_state_string(musb->xceiv->otg->state));
+
+ spin_lock_irqsave(&musb->lock, flags);
+ switch (musb->xceiv->otg->state) {
+ case OTG_STATE_A_WAIT_BCON:
+ devctl &= ~MUSB_DEVCTL_SESSION;
+ musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+ devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+ if (devctl & MUSB_DEVCTL_BDEVICE) {
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+ MUSB_DEV_MODE(musb);
+ } else {
+ musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+ MUSB_HST_MODE(musb);
+ }
+ break;
+ case OTG_STATE_A_WAIT_VFALL:
+ /*
+ * Wait till VBUS falls below SessionEnd (~0.2 V); the 1.3
+ * RTL seems to mis-handle session "start" otherwise (or in
+ * our case "recover"), in routine "VBUS was valid by the time
+ * VBUSERR got reported during enumeration" cases.
+ */
+ if (devctl & MUSB_DEVCTL_VBUS) {
+ mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
+ break;
+ }
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+ musb_writel(musb->ctrl_base, DA8XX_USB_INTR_SRC_SET_REG,
+ MUSB_INTR_VBUSERROR << DA8XX_INTR_USB_SHIFT);
+ break;
+ case OTG_STATE_B_IDLE:
+ /*
+ * There's no ID-changed IRQ, so we have no good way to tell
+ * when to switch to the A-Default state machine (by setting
+ * the DEVCTL.Session bit).
+ *
+ * Workaround: whenever we're in B_IDLE, try setting the
+ * session flag every few seconds. If it works, ID was
+ * grounded and we're now in the A-Default state machine.
+ *
+ * NOTE: setting the session flag is _supposed_ to trigger
+ * SRP but clearly it doesn't.
+ */
+ musb_writeb(mregs, MUSB_DEVCTL, devctl | MUSB_DEVCTL_SESSION);
+ devctl = musb_readb(mregs, MUSB_DEVCTL);
+ if (devctl & MUSB_DEVCTL_BDEVICE)
+ mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
+ else
+ musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+ break;
+ default:
+ break;
+ }
+ spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout)
+{
+ static unsigned long last_timer;
+
+ if (timeout == 0)
+ timeout = jiffies + msecs_to_jiffies(3);
+
+ /* Never idle if active, or when VBUS timeout is not set as host */
+ if (musb->is_active || (musb->a_wait_bcon == 0 &&
+ musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON)) {
+ dev_dbg(musb->controller, "%s active, deleting timer\n",
+ usb_otg_state_string(musb->xceiv->otg->state));
+ del_timer(&musb->dev_timer);
+ last_timer = jiffies;
+ return;
+ }
+
+ if (time_after(last_timer, timeout) && timer_pending(&musb->dev_timer)) {
+ dev_dbg(musb->controller, "Longer idle timer already pending, ignoring...\n");
+ return;
+ }
+ last_timer = timeout;
+
+ dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
+ usb_otg_state_string(musb->xceiv->otg->state),
+ jiffies_to_msecs(timeout - jiffies));
+ mod_timer(&musb->dev_timer, timeout);
+}
+
+static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
+{
+ struct musb *musb = hci;
+ void __iomem *reg_base = musb->ctrl_base;
+ unsigned long flags;
+ irqreturn_t ret = IRQ_NONE;
+ u32 status;
+
+ spin_lock_irqsave(&musb->lock, flags);
+
+ /*
+ * NOTE: DA8XX shadows the Mentor IRQs. Don't manage them through
+ * the Mentor registers (except for setup), use the TI ones and EOI.
+ */
+
+ /* Acknowledge and handle non-CPPI interrupts */
+ status = musb_readl(reg_base, DA8XX_USB_INTR_SRC_MASKED_REG);
+ if (!status)
+ goto eoi;
+
+ musb_writel(reg_base, DA8XX_USB_INTR_SRC_CLEAR_REG, status);
+ dev_dbg(musb->controller, "USB IRQ %08x\n", status);
+
+ musb->int_rx = (status & DA8XX_INTR_RX_MASK) >> DA8XX_INTR_RX_SHIFT;
+ musb->int_tx = (status & DA8XX_INTR_TX_MASK) >> DA8XX_INTR_TX_SHIFT;
+ musb->int_usb = (status & DA8XX_INTR_USB_MASK) >> DA8XX_INTR_USB_SHIFT;
+
+ /*
+ * DRVVBUS IRQs are the only proxy we have (a very poor one!) for
+ * DA8xx's missing ID change IRQ. We need an ID change IRQ to
+ * switch appropriately between halves of the OTG state machine.
+ * Managing DEVCTL.Session per Mentor docs requires that we know its
+ * value but DEVCTL.BDevice is invalid without DEVCTL.Session set.
+ * Also, DRVVBUS pulses for SRP (but not at 5 V)...
+ */
+ if (status & (DA8XX_INTR_DRVVBUS << DA8XX_INTR_USB_SHIFT)) {
+ int drvvbus = musb_readl(reg_base, DA8XX_USB_STAT_REG);
+ void __iomem *mregs = musb->mregs;
+ u8 devctl = musb_readb(mregs, MUSB_DEVCTL);
+ int err;
+
+ err = musb->int_usb & MUSB_INTR_VBUSERROR;
+ if (err) {
+ /*
+ * The Mentor core doesn't debounce VBUS as needed
+ * to cope with device connect current spikes. This
+ * means it's not uncommon for bus-powered devices
+ * to get VBUS errors during enumeration.
+ *
+ * This is a workaround, but newer RTL from Mentor
+ * seems to allow a better one: "re"-starting sessions
+ * without waiting for VBUS to stop registering in
+ * devctl.
+ */
+ musb->int_usb &= ~MUSB_INTR_VBUSERROR;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
+ mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
+ WARNING("VBUS error workaround (delay coming)\n");
+ } else if (drvvbus) {
+ MUSB_HST_MODE(musb);
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+ portstate(musb->port1_status |= USB_PORT_STAT_POWER);
+ del_timer(&musb->dev_timer);
+ } else if (!(musb->int_usb & MUSB_INTR_BABBLE)) {
+ /*
+ * When babble condition happens, drvvbus interrupt
+ * is also generated. Ignore this drvvbus interrupt
+ * and let babble interrupt handler recovers the
+ * controller; otherwise, the host-mode flag is lost
+ * due to the MUSB_DEV_MODE() call below and babble
+ * recovery logic will not be called.
+ */
+ musb->is_active = 0;
+ MUSB_DEV_MODE(musb);
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+ portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
+ }
+
+ dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
+ drvvbus ? "on" : "off",
+ usb_otg_state_string(musb->xceiv->otg->state),
+ err ? " ERROR" : "",
+ devctl);
+ ret = IRQ_HANDLED;
+ }
+
+ if (musb->int_tx || musb->int_rx || musb->int_usb)
+ ret |= musb_interrupt(musb);
+
+ eoi:
+ /* EOI needs to be written for the IRQ to be re-asserted. */
+ if (ret == IRQ_HANDLED || status)
+ musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0);
+
+ /* Poll for ID change */
+ if (musb->xceiv->otg->state == OTG_STATE_B_IDLE)
+ mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
+
+ spin_unlock_irqrestore(&musb->lock, flags);
+
+ return ret;
+}
+
+static int da8xx_musb_set_mode(struct musb *musb, u8 musb_mode)
+{
+ struct da8xx_glue *glue = dev_get_drvdata(musb->controller->parent);
+ enum phy_mode phy_mode;
+
+ /*
+ * The PHY has some issues when it is forced in device or host mode.
+ * Unless the user request another mode, configure the PHY in OTG mode.
+ */
+ if (!musb->is_initialized)
+ return phy_set_mode(glue->phy, PHY_MODE_USB_OTG);
+
+ switch (musb_mode) {
+ case MUSB_HOST: /* Force VBUS valid, ID = 0 */
+ phy_mode = PHY_MODE_USB_HOST;
+ break;
+ case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
+ phy_mode = PHY_MODE_USB_DEVICE;
+ break;
+ case MUSB_OTG: /* Don't override the VBUS/ID comparators */
+ phy_mode = PHY_MODE_USB_OTG;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return phy_set_mode(glue->phy, phy_mode);
+}
+
+static int da8xx_musb_init(struct musb *musb)
+{
+ struct da8xx_glue *glue = dev_get_drvdata(musb->controller->parent);
+ void __iomem *reg_base = musb->ctrl_base;
+ u32 rev;
+ int ret = -ENODEV;
+
+ musb->mregs += DA8XX_MENTOR_CORE_OFFSET;
+
+ ret = clk_prepare_enable(glue->clk);
+ if (ret) {
+ dev_err(glue->dev, "failed to enable clock\n");
+ return ret;
+ }
+
+ /* Returns zero if e.g. not clocked */
+ rev = musb_readl(reg_base, DA8XX_USB_REVISION_REG);
+ if (!rev) {
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+ if (IS_ERR_OR_NULL(musb->xceiv)) {
+ ret = -EPROBE_DEFER;
+ goto fail;
+ }
+
+ timer_setup(&musb->dev_timer, otg_timer, 0);
+
+ /* Reset the controller */
+ musb_writel(reg_base, DA8XX_USB_CTRL_REG, DA8XX_SOFT_RESET_MASK);
+
+ /* Start the on-chip PHY and its PLL. */
+ ret = phy_init(glue->phy);
+ if (ret) {
+ dev_err(glue->dev, "Failed to init phy.\n");
+ goto fail;
+ }
+
+ ret = phy_power_on(glue->phy);
+ if (ret) {
+ dev_err(glue->dev, "Failed to power on phy.\n");
+ goto err_phy_power_on;
+ }
+
+ msleep(5);
+
+ /* NOTE: IRQs are in mixed mode, not bypass to pure MUSB */
+ pr_debug("DA8xx OTG revision %08x, control %02x\n", rev,
+ musb_readb(reg_base, DA8XX_USB_CTRL_REG));
+
+ musb->isr = da8xx_musb_interrupt;
+ return 0;
+
+err_phy_power_on:
+ phy_exit(glue->phy);
+fail:
+ clk_disable_unprepare(glue->clk);
+ return ret;
+}
+
+static int da8xx_musb_exit(struct musb *musb)
+{
+ struct da8xx_glue *glue = dev_get_drvdata(musb->controller->parent);
+
+ del_timer_sync(&musb->dev_timer);
+
+ phy_power_off(glue->phy);
+ phy_exit(glue->phy);
+ clk_disable_unprepare(glue->clk);
+
+ usb_put_phy(musb->xceiv);
+
+ return 0;
+}
+
+static inline u8 get_vbus_power(struct device *dev)
+{
+ struct regulator *vbus_supply;
+ int current_uA;
+
+ vbus_supply = regulator_get_optional(dev, "vbus");
+ if (IS_ERR(vbus_supply))
+ return 255;
+ current_uA = regulator_get_current_limit(vbus_supply);
+ regulator_put(vbus_supply);
+ if (current_uA <= 0 || current_uA > 510000)
+ return 255;
+ return current_uA / 1000 / 2;
+}
+
+#ifdef CONFIG_USB_TI_CPPI41_DMA
+static void da8xx_dma_controller_callback(struct dma_controller *c)
+{
+ struct musb *musb = c->musb;
+ void __iomem *reg_base = musb->ctrl_base;
+
+ musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0);
+}
+
+static struct dma_controller *
+da8xx_dma_controller_create(struct musb *musb, void __iomem *base)
+{
+ struct dma_controller *controller;
+
+ controller = cppi41_dma_controller_create(musb, base);
+ if (IS_ERR_OR_NULL(controller))
+ return controller;
+
+ controller->dma_callback = da8xx_dma_controller_callback;
+
+ return controller;
+}
+#endif
+
+static const struct musb_platform_ops da8xx_ops = {
+ .quirks = MUSB_INDEXED_EP | MUSB_PRESERVE_SESSION |
+ MUSB_DMA_CPPI41 | MUSB_DA8XX,
+ .init = da8xx_musb_init,
+ .exit = da8xx_musb_exit,
+
+ .fifo_mode = 2,
+#ifdef CONFIG_USB_TI_CPPI41_DMA
+ .dma_init = da8xx_dma_controller_create,
+ .dma_exit = cppi41_dma_controller_destroy,
+#endif
+ .enable = da8xx_musb_enable,
+ .disable = da8xx_musb_disable,
+
+ .set_mode = da8xx_musb_set_mode,
+ .try_idle = da8xx_musb_try_idle,
+
+ .set_vbus = da8xx_musb_set_vbus,
+};
+
+static const struct platform_device_info da8xx_dev_info = {
+ .name = "musb-hdrc",
+ .id = PLATFORM_DEVID_AUTO,
+ .dma_mask = DMA_BIT_MASK(32),
+};
+
+static const struct musb_hdrc_config da8xx_config = {
+ .ram_bits = 10,
+ .num_eps = 5,
+ .multipoint = 1,
+};
+
+static struct of_dev_auxdata da8xx_auxdata_lookup[] = {
+ OF_DEV_AUXDATA("ti,da830-cppi41", 0x01e01000, "cppi41-dmaengine",
+ NULL),
+ {}
+};
+
+static int da8xx_probe(struct platform_device *pdev)
+{
+ struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct da8xx_glue *glue;
+ struct platform_device_info pinfo;
+ struct clk *clk;
+ struct device_node *np = pdev->dev.of_node;
+ int ret;
+
+ glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
+ if (!glue)
+ return -ENOMEM;
+
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ return PTR_ERR(clk);
+ }
+
+ glue->phy = devm_phy_get(&pdev->dev, "usb-phy");
+ if (IS_ERR(glue->phy))
+ return dev_err_probe(&pdev->dev, PTR_ERR(glue->phy),
+ "failed to get phy\n");
+
+ glue->dev = &pdev->dev;
+ glue->clk = clk;
+
+ if (IS_ENABLED(CONFIG_OF) && np) {
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ pdata->config = &da8xx_config;
+ pdata->mode = musb_get_mode(&pdev->dev);
+ pdata->power = get_vbus_power(&pdev->dev);
+ }
+
+ pdata->platform_ops = &da8xx_ops;
+
+ glue->usb_phy = usb_phy_generic_register();
+ ret = PTR_ERR_OR_ZERO(glue->usb_phy);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register usb_phy\n");
+ return ret;
+ }
+ platform_set_drvdata(pdev, glue);
+
+ ret = of_platform_populate(pdev->dev.of_node, NULL,
+ da8xx_auxdata_lookup, &pdev->dev);
+ if (ret)
+ return ret;
+
+ pinfo = da8xx_dev_info;
+ pinfo.parent = &pdev->dev;
+ pinfo.res = pdev->resource;
+ pinfo.num_res = pdev->num_resources;
+ pinfo.data = pdata;
+ pinfo.size_data = sizeof(*pdata);
+ pinfo.fwnode = of_fwnode_handle(np);
+ pinfo.of_node_reused = true;
+
+ glue->musb = platform_device_register_full(&pinfo);
+ ret = PTR_ERR_OR_ZERO(glue->musb);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
+ usb_phy_generic_unregister(glue->usb_phy);
+ }
+
+ return ret;
+}
+
+static void da8xx_remove(struct platform_device *pdev)
+{
+ struct da8xx_glue *glue = platform_get_drvdata(pdev);
+
+ platform_device_unregister(glue->musb);
+ usb_phy_generic_unregister(glue->usb_phy);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int da8xx_suspend(struct device *dev)
+{
+ int ret;
+ struct da8xx_glue *glue = dev_get_drvdata(dev);
+
+ ret = phy_power_off(glue->phy);
+ if (ret)
+ return ret;
+ clk_disable_unprepare(glue->clk);
+
+ return 0;
+}
+
+static int da8xx_resume(struct device *dev)
+{
+ int ret;
+ struct da8xx_glue *glue = dev_get_drvdata(dev);
+
+ ret = clk_prepare_enable(glue->clk);
+ if (ret)
+ return ret;
+ return phy_power_on(glue->phy);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(da8xx_pm_ops, da8xx_suspend, da8xx_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id da8xx_id_table[] = {
+ {
+ .compatible = "ti,da830-musb",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, da8xx_id_table);
+#endif
+
+static struct platform_driver da8xx_driver = {
+ .probe = da8xx_probe,
+ .remove_new = da8xx_remove,
+ .driver = {
+ .name = "musb-da8xx",
+ .pm = &da8xx_pm_ops,
+ .of_match_table = of_match_ptr(da8xx_id_table),
+ },
+};
+
+MODULE_DESCRIPTION("DA8xx/OMAP-L1x MUSB Glue Layer");
+MODULE_AUTHOR("Sergei Shtylyov <sshtylyov@ru.mvista.com>");
+MODULE_LICENSE("GPL v2");
+module_platform_driver(da8xx_driver);