diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /drivers/usb/usbip/vudc_transfer.c | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/usb/usbip/vudc_transfer.c')
-rw-r--r-- | drivers/usb/usbip/vudc_transfer.c | 496 |
1 files changed, 496 insertions, 0 deletions
diff --git a/drivers/usb/usbip/vudc_transfer.c b/drivers/usb/usbip/vudc_transfer.c new file mode 100644 index 0000000000..7e801fee33 --- /dev/null +++ b/drivers/usb/usbip/vudc_transfer.c @@ -0,0 +1,496 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2015 Karol Kosik <karo9@interia.eu> + * Copyright (C) 2015-2016 Samsung Electronics + * Igor Kotrasinski <i.kotrasinsk@samsung.com> + * + * Based on dummy_hcd.c, which is: + * Copyright (C) 2003 David Brownell + * Copyright (C) 2003-2005 Alan Stern + */ + +#include <linux/usb.h> +#include <linux/timer.h> +#include <linux/usb/ch9.h> + +#include "vudc.h" + +#define DEV_REQUEST (USB_TYPE_STANDARD | USB_RECIP_DEVICE) +#define DEV_INREQUEST (DEV_REQUEST | USB_DIR_IN) +#define INTF_REQUEST (USB_TYPE_STANDARD | USB_RECIP_INTERFACE) +#define INTF_INREQUEST (INTF_REQUEST | USB_DIR_IN) +#define EP_REQUEST (USB_TYPE_STANDARD | USB_RECIP_ENDPOINT) +#define EP_INREQUEST (EP_REQUEST | USB_DIR_IN) + +static int get_frame_limit(enum usb_device_speed speed) +{ + switch (speed) { + case USB_SPEED_LOW: + return 8 /*bytes*/ * 12 /*packets*/; + case USB_SPEED_FULL: + return 64 /*bytes*/ * 19 /*packets*/; + case USB_SPEED_HIGH: + return 512 /*bytes*/ * 13 /*packets*/ * 8 /*uframes*/; + case USB_SPEED_SUPER: + /* Bus speed is 500000 bytes/ms, so use a little less */ + return 490000; + default: + /* error */ + return -1; + } + +} + +/* + * handle_control_request() - handles all control transfers + * @udc: pointer to vudc + * @urb: the urb request to handle + * @setup: pointer to the setup data for a USB device control + * request + * @status: pointer to request handling status + * + * Return 0 - if the request was handled + * 1 - if the request wasn't handles + * error code on error + * + * Adapted from drivers/usb/gadget/udc/dummy_hcd.c + */ +static int handle_control_request(struct vudc *udc, struct urb *urb, + struct usb_ctrlrequest *setup, + int *status) +{ + struct vep *ep2; + int ret_val = 1; + unsigned int w_index; + unsigned int w_value; + + w_index = le16_to_cpu(setup->wIndex); + w_value = le16_to_cpu(setup->wValue); + switch (setup->bRequest) { + case USB_REQ_SET_ADDRESS: + if (setup->bRequestType != DEV_REQUEST) + break; + udc->address = w_value; + ret_val = 0; + *status = 0; + break; + case USB_REQ_SET_FEATURE: + if (setup->bRequestType == DEV_REQUEST) { + ret_val = 0; + switch (w_value) { + case USB_DEVICE_REMOTE_WAKEUP: + break; + case USB_DEVICE_B_HNP_ENABLE: + udc->gadget.b_hnp_enable = 1; + break; + case USB_DEVICE_A_HNP_SUPPORT: + udc->gadget.a_hnp_support = 1; + break; + case USB_DEVICE_A_ALT_HNP_SUPPORT: + udc->gadget.a_alt_hnp_support = 1; + break; + default: + ret_val = -EOPNOTSUPP; + } + if (ret_val == 0) { + udc->devstatus |= (1 << w_value); + *status = 0; + } + } else if (setup->bRequestType == EP_REQUEST) { + /* endpoint halt */ + ep2 = vudc_find_endpoint(udc, w_index); + if (!ep2 || ep2->ep.name == udc->ep[0].ep.name) { + ret_val = -EOPNOTSUPP; + break; + } + ep2->halted = 1; + ret_val = 0; + *status = 0; + } + break; + case USB_REQ_CLEAR_FEATURE: + if (setup->bRequestType == DEV_REQUEST) { + ret_val = 0; + switch (w_value) { + case USB_DEVICE_REMOTE_WAKEUP: + w_value = USB_DEVICE_REMOTE_WAKEUP; + break; + + case USB_DEVICE_U1_ENABLE: + case USB_DEVICE_U2_ENABLE: + case USB_DEVICE_LTM_ENABLE: + ret_val = -EOPNOTSUPP; + break; + default: + ret_val = -EOPNOTSUPP; + break; + } + if (ret_val == 0) { + udc->devstatus &= ~(1 << w_value); + *status = 0; + } + } else if (setup->bRequestType == EP_REQUEST) { + /* endpoint halt */ + ep2 = vudc_find_endpoint(udc, w_index); + if (!ep2) { + ret_val = -EOPNOTSUPP; + break; + } + if (!ep2->wedged) + ep2->halted = 0; + ret_val = 0; + *status = 0; + } + break; + case USB_REQ_GET_STATUS: + if (setup->bRequestType == DEV_INREQUEST + || setup->bRequestType == INTF_INREQUEST + || setup->bRequestType == EP_INREQUEST) { + char *buf; + /* + * device: remote wakeup, selfpowered + * interface: nothing + * endpoint: halt + */ + buf = (char *)urb->transfer_buffer; + if (urb->transfer_buffer_length > 0) { + if (setup->bRequestType == EP_INREQUEST) { + ep2 = vudc_find_endpoint(udc, w_index); + if (!ep2) { + ret_val = -EOPNOTSUPP; + break; + } + buf[0] = ep2->halted; + } else if (setup->bRequestType == + DEV_INREQUEST) { + buf[0] = (u8)udc->devstatus; + } else + buf[0] = 0; + } + if (urb->transfer_buffer_length > 1) + buf[1] = 0; + urb->actual_length = min_t(u32, 2, + urb->transfer_buffer_length); + ret_val = 0; + *status = 0; + } + break; + } + return ret_val; +} + +/* Adapted from dummy_hcd.c ; caller must hold lock */ +static int transfer(struct vudc *udc, + struct urb *urb, struct vep *ep, int limit) +{ + struct vrequest *req; + int sent = 0; +top: + /* if there's no request queued, the device is NAKing; return */ + list_for_each_entry(req, &ep->req_queue, req_entry) { + unsigned int host_len, dev_len, len; + void *ubuf_pos, *rbuf_pos; + int is_short, to_host; + int rescan = 0; + + /* + * 1..N packets of ep->ep.maxpacket each ... the last one + * may be short (including zero length). + * + * writer can send a zlp explicitly (length 0) or implicitly + * (length mod maxpacket zero, and 'zero' flag); they always + * terminate reads. + */ + host_len = urb->transfer_buffer_length - urb->actual_length; + dev_len = req->req.length - req->req.actual; + len = min(host_len, dev_len); + + to_host = usb_pipein(urb->pipe); + if (unlikely(len == 0)) + is_short = 1; + else { + /* send multiple of maxpacket first, then remainder */ + if (len >= ep->ep.maxpacket) { + is_short = 0; + if (len % ep->ep.maxpacket > 0) + rescan = 1; + len -= len % ep->ep.maxpacket; + } else { + is_short = 1; + } + + ubuf_pos = urb->transfer_buffer + urb->actual_length; + rbuf_pos = req->req.buf + req->req.actual; + + if (urb->pipe & USB_DIR_IN) + memcpy(ubuf_pos, rbuf_pos, len); + else + memcpy(rbuf_pos, ubuf_pos, len); + + urb->actual_length += len; + req->req.actual += len; + sent += len; + } + + /* + * short packets terminate, maybe with overflow/underflow. + * it's only really an error to write too much. + * + * partially filling a buffer optionally blocks queue advances + * (so completion handlers can clean up the queue) but we don't + * need to emulate such data-in-flight. + */ + if (is_short) { + if (host_len == dev_len) { + req->req.status = 0; + urb->status = 0; + } else if (to_host) { + req->req.status = 0; + if (dev_len > host_len) + urb->status = -EOVERFLOW; + else + urb->status = 0; + } else { + urb->status = 0; + if (host_len > dev_len) + req->req.status = -EOVERFLOW; + else + req->req.status = 0; + } + + /* many requests terminate without a short packet */ + /* also check if we need to send zlp */ + } else { + if (req->req.length == req->req.actual) { + if (req->req.zero && to_host) + rescan = 1; + else + req->req.status = 0; + } + if (urb->transfer_buffer_length == urb->actual_length) { + if (urb->transfer_flags & URB_ZERO_PACKET && + !to_host) + rescan = 1; + else + urb->status = 0; + } + } + + /* device side completion --> continuable */ + if (req->req.status != -EINPROGRESS) { + + list_del_init(&req->req_entry); + spin_unlock(&udc->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&udc->lock); + + /* requests might have been unlinked... */ + rescan = 1; + } + + /* host side completion --> terminate */ + if (urb->status != -EINPROGRESS) + break; + + /* rescan to continue with any other queued i/o */ + if (rescan) + goto top; + } + return sent; +} + +static void v_timer(struct timer_list *t) +{ + struct vudc *udc = from_timer(udc, t, tr_timer.timer); + struct transfer_timer *timer = &udc->tr_timer; + struct urbp *urb_p, *tmp; + unsigned long flags; + struct usb_ep *_ep; + struct vep *ep; + int ret = 0; + int total, limit; + + spin_lock_irqsave(&udc->lock, flags); + + total = get_frame_limit(udc->gadget.speed); + if (total < 0) { /* unknown speed, or not set yet */ + timer->state = VUDC_TR_IDLE; + spin_unlock_irqrestore(&udc->lock, flags); + return; + } + /* is it next frame now? */ + if (time_after(jiffies, timer->frame_start + msecs_to_jiffies(1))) { + timer->frame_limit = total; + /* FIXME: how to make it accurate? */ + timer->frame_start = jiffies; + } else { + total = timer->frame_limit; + } + + /* We have to clear ep0 flags separately as it's not on the list */ + udc->ep[0].already_seen = 0; + list_for_each_entry(_ep, &udc->gadget.ep_list, ep_list) { + ep = to_vep(_ep); + ep->already_seen = 0; + } + +restart: + list_for_each_entry_safe(urb_p, tmp, &udc->urb_queue, urb_entry) { + struct urb *urb = urb_p->urb; + + ep = urb_p->ep; + if (urb->unlinked) + goto return_urb; + if (timer->state != VUDC_TR_RUNNING) + continue; + + if (!ep) { + urb->status = -EPROTO; + goto return_urb; + } + + /* Used up bandwidth? */ + if (total <= 0 && ep->type == USB_ENDPOINT_XFER_BULK) + continue; + + if (ep->already_seen) + continue; + ep->already_seen = 1; + if (ep == &udc->ep[0] && urb_p->new) { + ep->setup_stage = 1; + urb_p->new = 0; + } + if (ep->halted && !ep->setup_stage) { + urb->status = -EPIPE; + goto return_urb; + } + + if (ep == &udc->ep[0] && ep->setup_stage) { + /* TODO - flush any stale requests */ + ep->setup_stage = 0; + ep->halted = 0; + + ret = handle_control_request(udc, urb, + (struct usb_ctrlrequest *) urb->setup_packet, + (&urb->status)); + if (ret > 0) { + spin_unlock(&udc->lock); + ret = udc->driver->setup(&udc->gadget, + (struct usb_ctrlrequest *) + urb->setup_packet); + spin_lock(&udc->lock); + } + if (ret >= 0) { + /* no delays (max 64kb data stage) */ + limit = 64 * 1024; + goto treat_control_like_bulk; + } else { + urb->status = -EPIPE; + urb->actual_length = 0; + goto return_urb; + } + } + + limit = total; + switch (ep->type) { + case USB_ENDPOINT_XFER_ISOC: + /* TODO: support */ + urb->status = -EXDEV; + break; + + case USB_ENDPOINT_XFER_INT: + /* + * TODO: figure out bandwidth guarantees + * for now, give unlimited bandwidth + */ + limit += urb->transfer_buffer_length; + fallthrough; + default: +treat_control_like_bulk: + total -= transfer(udc, urb, ep, limit); + } + if (urb->status == -EINPROGRESS) + continue; + +return_urb: + if (ep) + ep->already_seen = ep->setup_stage = 0; + + spin_lock(&udc->lock_tx); + list_del(&urb_p->urb_entry); + if (!urb->unlinked) { + v_enqueue_ret_submit(udc, urb_p); + } else { + v_enqueue_ret_unlink(udc, urb_p->seqnum, + urb->unlinked); + free_urbp_and_urb(urb_p); + } + wake_up(&udc->tx_waitq); + spin_unlock(&udc->lock_tx); + + goto restart; + } + + /* TODO - also wait on empty usb_request queues? */ + if (list_empty(&udc->urb_queue)) + timer->state = VUDC_TR_IDLE; + else + mod_timer(&timer->timer, + timer->frame_start + msecs_to_jiffies(1)); + + spin_unlock_irqrestore(&udc->lock, flags); +} + +/* All timer functions are run with udc->lock held */ + +void v_init_timer(struct vudc *udc) +{ + struct transfer_timer *t = &udc->tr_timer; + + timer_setup(&t->timer, v_timer, 0); + t->state = VUDC_TR_STOPPED; +} + +void v_start_timer(struct vudc *udc) +{ + struct transfer_timer *t = &udc->tr_timer; + + dev_dbg(&udc->pdev->dev, "timer start"); + switch (t->state) { + case VUDC_TR_RUNNING: + return; + case VUDC_TR_IDLE: + return v_kick_timer(udc, jiffies); + case VUDC_TR_STOPPED: + t->state = VUDC_TR_IDLE; + t->frame_start = jiffies; + t->frame_limit = get_frame_limit(udc->gadget.speed); + return v_kick_timer(udc, jiffies); + } +} + +void v_kick_timer(struct vudc *udc, unsigned long time) +{ + struct transfer_timer *t = &udc->tr_timer; + + dev_dbg(&udc->pdev->dev, "timer kick"); + switch (t->state) { + case VUDC_TR_RUNNING: + return; + case VUDC_TR_IDLE: + t->state = VUDC_TR_RUNNING; + fallthrough; + case VUDC_TR_STOPPED: + /* we may want to kick timer to unqueue urbs */ + mod_timer(&t->timer, time); + } +} + +void v_stop_timer(struct vudc *udc) +{ + struct transfer_timer *t = &udc->tr_timer; + + /* timer itself will take care of stopping */ + dev_dbg(&udc->pdev->dev, "timer stop"); + t->state = VUDC_TR_STOPPED; +} |