Merging upstream version 6.9.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

104 files changed, 4542 insertions, 1958 deletions

diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 3a9a0dd4be..949eca0ade 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
 obj-$(CONFIG_USB_FSL_USB2)	+= host/
 obj-$(CONFIG_USB_FOTG210_HCD)	+= host/
 obj-$(CONFIG_USB_MAX3421_HCD)	+= host/
+obj-$(CONFIG_USB_XEN_HCD)	+= host/
 
 obj-$(CONFIG_USB_C67X00_HCD)	+= c67x00/
 
diff --git a/drivers/usb/cdns3/drd.c b/drivers/usb/cdns3/drd.c
index ee917f1b09..8b936a2e93 100644
--- a/drivers/usb/cdns3/drd.c
+++ b/drivers/usb/cdns3/drd.c
@@ -435,7 +435,7 @@ int cdns_drd_init(struct cdns *cdns)
 			writel(1, &cdns->otg_v1_regs->simulate);
 			cdns->version  = CDNS3_CONTROLLER_V1;
 		} else {
-			dev_err(cdns->dev, "not supporte DID=0x%08x\n", state);
+			dev_err(cdns->dev, "not supported DID=0x%08x\n", state);
 			return -EINVAL;
 		}
 
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index c553decb54..6830be4419 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -266,14 +266,14 @@ static void wdm_int_callback(struct urb *urb)
 			dev_err(&desc->intf->dev, "Stall on int endpoint\n");
 			goto sw; /* halt is cleared in work */
 		default:
-			dev_err(&desc->intf->dev,
+			dev_err_ratelimited(&desc->intf->dev,
 				"nonzero urb status received: %d\n", status);
 			break;
 		}
 	}
 
 	if (urb->actual_length < sizeof(struct usb_cdc_notification)) {
-		dev_err(&desc->intf->dev, "wdm_int_callback - %d bytes\n",
+		dev_err_ratelimited(&desc->intf->dev, "wdm_int_callback - %d bytes\n",
 			urb->actual_length);
 		goto exit;
 	}
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 351ede4b5d..58e3ca7e47 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -116,3 +116,30 @@ config USB_AUTOSUSPEND_DELAY
 	  The default value Linux has always had is 2 seconds.  Change
 	  this value if you want a different delay and cannot modify
 	  the command line or module parameter.
+
+config USB_DEFAULT_AUTHORIZATION_MODE
+	int "Default authorization mode for USB devices"
+	range 0 2
+	default 1
+	depends on USB
+	help
+	  Select the default USB device authorization mode. Can be overridden
+	  with usbcore.authorized_default command line or module parameter.
+
+	  This option allows you to choose whether USB devices that are
+	  connected to the system can be used by default, or if they are
+	  locked down.
+
+	  With value 0 all connected USB devices with the exception of root
+	  hub require user space authorization before they can be used.
+
+	  With value 1 (default) no user space authorization is required to
+	  use connected USB devices.
+
+	  With value 2 all connected USB devices with exception of internal
+	  USB devices require user space authorization before they can be
+	  used. Note that in this mode the differentiation between internal
+	  and external USB devices relies on ACPI, and on systems without
+	  ACPI selecting value 2 is analogous to selecting value 0.
+
+	  If unsure, keep the default value.
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index e01b1913d0..e02ba15f6e 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1710,9 +1710,7 @@ int usb_autoresume_device(struct usb_device *udev)
 {
 	int	status;
 
-	status = pm_runtime_get_sync(&udev->dev);
-	if (status < 0)
-		pm_runtime_put_sync(&udev->dev);
+	status = pm_runtime_resume_and_get(&udev->dev);
 	dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n",
 			__func__, atomic_read(&udev->dev.power.usage_count),
 			status);
@@ -1818,9 +1816,7 @@ int usb_autopm_get_interface(struct usb_interface *intf)
 {
 	int	status;
 
-	status = pm_runtime_get_sync(&intf->dev);
-	if (status < 0)
-		pm_runtime_put_sync(&intf->dev);
+	status = pm_runtime_resume_and_get(&intf->dev);
 	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
 			__func__, atomic_read(&intf->dev.power.usage_count),
 			status);
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index a2530811cf..4b38b87a13 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -141,7 +141,7 @@ static void ep_device_release(struct device *dev)
 	kfree(ep_dev);
 }
 
-struct device_type usb_ep_device_type = {
+const struct device_type usb_ep_device_type = {
 	.name =		"usb_endpoint",
 	.release = ep_device_release,
 };
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 12b6dfeaf6..fb1aa0d4fc 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -357,12 +357,10 @@ static const u8 ss_rh_config_descriptor[] = {
 #define USB_AUTHORIZE_ALL	1
 #define USB_AUTHORIZE_INTERNAL	2
 
-static int authorized_default = USB_AUTHORIZE_WIRED;
+static int authorized_default = CONFIG_USB_DEFAULT_AUTHORIZATION_MODE;
 module_param(authorized_default, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(authorized_default,
-		"Default USB device authorization: 0 is not authorized, 1 is "
-		"authorized, 2 is authorized for internal devices, -1 is "
-		"authorized (default, same as 1)");
+		"Default USB device authorization: 0 is not authorized, 1 is authorized (default), 2 is authorized for internal devices, -1 is authorized (same as 1)");
 /*-------------------------------------------------------------------------*/
 
 /**
@@ -1625,6 +1623,7 @@ static void __usb_hcd_giveback_urb(struct urb *urb)
 	struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
 	struct usb_anchor *anchor = urb->anchor;
 	int status = urb->unlinked;
+	unsigned long flags;
 
 	urb->hcpriv = NULL;
 	if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
@@ -1642,13 +1641,14 @@ static void __usb_hcd_giveback_urb(struct urb *urb)
 	/* pass ownership to the completion handler */
 	urb->status = status;
 	/*
-	 * This function can be called in task context inside another remote
-	 * coverage collection section, but kcov doesn't support that kind of
-	 * recursion yet. Only collect coverage in softirq context for now.
+	 * Only collect coverage in the softirq context and disable interrupts
+	 * to avoid scenarios with nested remote coverage collection sections
+	 * that KCOV does not support.
+	 * See the comment next to kcov_remote_start_usb_softirq() for details.
 	 */
-	kcov_remote_start_usb_softirq((u64)urb->dev->bus->busnum);
+	flags = kcov_remote_start_usb_softirq((u64)urb->dev->bus->busnum);
 	urb->complete(urb);
-	kcov_remote_stop_softirq();
+	kcov_remote_stop_softirq(flags);
 
 	usb_anchor_resume_wakeups(anchor);
 	atomic_dec(&urb->use_count);
@@ -1664,9 +1664,10 @@ static void __usb_hcd_giveback_urb(struct urb *urb)
 	usb_put_urb(urb);
 }
 
-static void usb_giveback_urb_bh(struct tasklet_struct *t)
+static void usb_giveback_urb_bh(struct work_struct *work)
 {
-	struct giveback_urb_bh *bh = from_tasklet(bh, t, bh);
+	struct giveback_urb_bh *bh =
+		container_of(work, struct giveback_urb_bh, bh);
 	struct list_head local_list;
 
 	spin_lock_irq(&bh->lock);
@@ -1691,9 +1692,9 @@ static void usb_giveback_urb_bh(struct tasklet_struct *t)
 	spin_lock_irq(&bh->lock);
 	if (!list_empty(&bh->head)) {
 		if (bh->high_prio)
-			tasklet_hi_schedule(&bh->bh);
+			queue_work(system_bh_highpri_wq, &bh->bh);
 		else
-			tasklet_schedule(&bh->bh);
+			queue_work(system_bh_wq, &bh->bh);
 	}
 	bh->running = false;
 	spin_unlock_irq(&bh->lock);
@@ -1706,7 +1707,7 @@ static void usb_giveback_urb_bh(struct tasklet_struct *t)
  * @status: completion status code for the URB.
  *
  * Context: atomic. The completion callback is invoked in caller's context.
- * For HCDs with HCD_BH flag set, the completion callback is invoked in tasklet
+ * For HCDs with HCD_BH flag set, the completion callback is invoked in BH
  * context (except for URBs submitted to the root hub which always complete in
  * caller's context).
  *
@@ -1725,7 +1726,7 @@ void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status)
 	struct giveback_urb_bh *bh;
 	bool running;
 
-	/* pass status to tasklet via unlinked */
+	/* pass status to BH via unlinked */
 	if (likely(!urb->unlinked))
 		urb->unlinked = status;
 
@@ -1747,9 +1748,9 @@ void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status)
 	if (running)
 		;
 	else if (bh->high_prio)
-		tasklet_hi_schedule(&bh->bh);
+		queue_work(system_bh_highpri_wq, &bh->bh);
 	else
-		tasklet_schedule(&bh->bh);
+		queue_work(system_bh_wq, &bh->bh);
 }
 EXPORT_SYMBOL_GPL(usb_hcd_giveback_urb);
 
@@ -2540,7 +2541,7 @@ static void init_giveback_urb_bh(struct giveback_urb_bh *bh)
 
 	spin_lock_init(&bh->lock);
 	INIT_LIST_HEAD(&bh->head);
-	tasklet_setup(&bh->bh, usb_giveback_urb_bh);
+	INIT_WORK(&bh->bh, usb_giveback_urb_bh);
 }
 
 struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver,
@@ -2794,10 +2795,16 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	struct usb_device *rhdev;
 	struct usb_hcd *shared_hcd;
 
-	if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) {
-		hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev);
-		if (IS_ERR(hcd->phy_roothub))
-			return PTR_ERR(hcd->phy_roothub);
+	if (!hcd->skip_phy_initialization) {
+		if (usb_hcd_is_primary_hcd(hcd)) {
+			hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev);
+			if (IS_ERR(hcd->phy_roothub))
+				return PTR_ERR(hcd->phy_roothub);
+		} else {
+			hcd->phy_roothub = usb_phy_roothub_alloc_usb3_phy(hcd->self.sysdev);
+			if (IS_ERR(hcd->phy_roothub))
+				return PTR_ERR(hcd->phy_roothub);
+		}
 
 		retval = usb_phy_roothub_init(hcd->phy_roothub);
 		if (retval)
@@ -2926,7 +2933,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
 			&& device_can_wakeup(&hcd->self.root_hub->dev))
 		dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
 
-	/* initialize tasklets */
+	/* initialize BHs */
 	init_giveback_urb_bh(&hcd->high_prio_bh);
 	hcd->high_prio_bh.high_prio = true;
 	init_giveback_urb_bh(&hcd->low_prio_bh);
@@ -3036,7 +3043,7 @@ void usb_remove_hcd(struct usb_hcd *hcd)
 	mutex_unlock(&usb_bus_idr_lock);
 
 	/*
-	 * tasklet_kill() isn't needed here because:
+	 * flush_work() isn't needed here because:
 	 * - driver's disconnect() called from usb_disconnect() should
 	 *   make sure its URBs are completed during the disconnect()
 	 *   callback
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 48e1e43780..0080530398 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -37,6 +37,7 @@
 #include <asm/byteorder.h>
 
 #include "hub.h"
+#include "phy.h"
 #include "otg_productlist.h"
 
 #define USB_VENDOR_GENESYS_LOGIC		0x05e3
@@ -633,6 +634,34 @@ static int hub_ext_port_status(struct usb_hub *hub, int port1, int type,
 		ret = 0;
 	}
 	mutex_unlock(&hub->status_mutex);
+
+	/*
+	 * There is no need to lock status_mutex here, because status_mutex
+	 * protects hub->status, and the phy driver only checks the port
+	 * status without changing the status.
+	 */
+	if (!ret) {
+		struct usb_device *hdev = hub->hdev;
+
+		/*
+		 * Only roothub will be notified of connection changes,
+		 * since the USB PHY only cares about changes at the next
+		 * level.
+		 */
+		if (is_root_hub(hdev)) {
+			struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
+			bool connect;
+			bool connect_change;
+
+			connect_change = *change & USB_PORT_STAT_C_CONNECTION;
+			connect = *status & USB_PORT_STAT_CONNECTION;
+			if (connect_change && connect)
+				usb_phy_roothub_notify_connect(hcd->phy_roothub, port1 - 1);
+			else if (connect_change)
+				usb_phy_roothub_notify_disconnect(hcd->phy_roothub, port1 - 1);
+		}
+	}
+
 	return ret;
 }
 
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 077dfe48d0..d2b2787be4 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1198,6 +1198,8 @@ EXPORT_SYMBOL_GPL(usb_get_status);
  * same status code used to report a true stall.
  *
  * This call is synchronous, and may not be used in an interrupt context.
+ * If a thread in your driver uses this call, make sure your disconnect()
+ * method can wait for it to complete.
  *
  * Return: Zero on success, or else the status code returned by the
  * underlying usb_control_msg() call.
@@ -1516,7 +1518,8 @@ void usb_enable_interface(struct usb_device *dev,
  * This call is synchronous, and may not be used in an interrupt context.
  * Also, drivers must not change altsettings while urbs are scheduled for
  * endpoints in that interface; all such urbs must first be completed
- * (perhaps forced by unlinking).
+ * (perhaps forced by unlinking). If a thread in your driver uses this call,
+ * make sure your disconnect() method can wait for it to complete.
  *
  * Return: Zero on success, or else the status code returned by the
  * underlying usb_control_msg() call.
@@ -1849,7 +1852,7 @@ static int usb_if_uevent(const struct device *dev, struct kobj_uevent_env *env)
 	return 0;
 }
 
-struct device_type usb_if_device_type = {
+const struct device_type usb_if_device_type = {
 	.name =		"usb_interface",
 	.release =	usb_release_interface,
 	.uevent =	usb_if_uevent,
diff --git a/drivers/usb/core/of.c b/drivers/usb/core/of.c
index db4ccf9ce3..f1a499ee48 100644
--- a/drivers/usb/core/of.c
+++ b/drivers/usb/core/of.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/of.h>
+#include <linux/of_graph.h>
 #include <linux/usb/of.h>
 
 /**
@@ -75,6 +76,76 @@ bool usb_of_has_combined_node(struct usb_device *udev)
 }
 EXPORT_SYMBOL_GPL(usb_of_has_combined_node);
 
+static bool usb_of_has_devices_or_graph(const struct usb_device *hub)
+{
+	const struct device_node *np = hub->dev.of_node;
+	struct device_node *child;
+
+	if (of_graph_is_present(np))
+		return true;
+
+	for_each_child_of_node(np, child)
+		if (of_property_present(child, "reg"))
+			return true;
+
+	return false;
+}
+
+/**
+ * usb_of_get_connect_type() - get a USB hub's port connect_type
+ * @hub: hub to which port is for @port1
+ * @port1: one-based index of port
+ *
+ * Get the connect_type of @port1 based on the device node for @hub. If the
+ * port is described in the OF graph, the connect_type is "hotplug". If the
+ * @hub has a child device has with a 'reg' property equal to @port1 the
+ * connect_type is "hard-wired". If there isn't an OF graph or child node at
+ * all then the connect_type is "unknown". Otherwise, the port is considered
+ * "unused" because it isn't described at all.
+ *
+ * Return: A connect_type for @port1 based on the device node for @hub.
+ */
+enum usb_port_connect_type usb_of_get_connect_type(struct usb_device *hub, int port1)
+{
+	struct device_node *np, *child, *ep, *remote_np;
+	enum usb_port_connect_type connect_type;
+
+	/* Only set connect_type if binding has ports/hardwired devices. */
+	if (!usb_of_has_devices_or_graph(hub))
+		return USB_PORT_CONNECT_TYPE_UNKNOWN;
+
+	/* Assume port is unused if there's a graph or a child node. */
+	connect_type = USB_PORT_NOT_USED;
+
+	np = hub->dev.of_node;
+	/*
+	 * Hotplug ports are connected to an available remote node, e.g.
+	 * usb-a-connector compatible node, in the OF graph.
+	 */
+	if (of_graph_is_present(np)) {
+		ep = of_graph_get_endpoint_by_regs(np, port1, -1);
+		if (ep) {
+			remote_np = of_graph_get_remote_port_parent(ep);
+			of_node_put(ep);
+			if (of_device_is_available(remote_np))
+				connect_type = USB_PORT_CONNECT_TYPE_HOT_PLUG;
+			of_node_put(remote_np);
+		}
+	}
+
+	/*
+	 * Hard-wired ports are child nodes with a reg property corresponding
+	 * to the port number, i.e. a usb device.
+	 */
+	child = usb_of_get_device_node(hub, port1);
+	if (of_device_is_available(child))
+		connect_type = USB_PORT_CONNECT_TYPE_HARD_WIRED;
+	of_node_put(child);
+
+	return connect_type;
+}
+EXPORT_SYMBOL_GPL(usb_of_get_connect_type);
+
 /**
  * usb_of_get_interface_node() - get a USB interface node
  * @udev: USB device of interface
diff --git a/drivers/usb/core/phy.c b/drivers/usb/core/phy.c
index fb1588e7c2..faa20054ad 100644
--- a/drivers/usb/core/phy.c
+++ b/drivers/usb/core/phy.c
@@ -19,6 +19,30 @@ struct usb_phy_roothub {
 	struct list_head	list;
 };
 
+/* Allocate the roothub_entry by specific name of phy */
+static int usb_phy_roothub_add_phy_by_name(struct device *dev, const char *name,
+					   struct list_head *list)
+{
+	struct usb_phy_roothub *roothub_entry;
+	struct phy *phy;
+
+	phy = devm_of_phy_get(dev, dev->of_node, name);
+	if (IS_ERR(phy))
+		return PTR_ERR(phy);
+
+	roothub_entry = devm_kzalloc(dev, sizeof(*roothub_entry), GFP_KERNEL);
+	if (!roothub_entry)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&roothub_entry->list);
+
+	roothub_entry->phy = phy;
+
+	list_add_tail(&roothub_entry->list, list);
+
+	return 0;
+}
+
 static int usb_phy_roothub_add_phy(struct device *dev, int index,
 				   struct list_head *list)
 {
@@ -65,6 +89,9 @@ struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev)
 
 	INIT_LIST_HEAD(&phy_roothub->list);
 
+	if (!usb_phy_roothub_add_phy_by_name(dev, "usb2-phy", &phy_roothub->list))
+		return phy_roothub;
+
 	for (i = 0; i < num_phys; i++) {
 		err = usb_phy_roothub_add_phy(dev, i, &phy_roothub->list);
 		if (err)
@@ -75,6 +102,41 @@ struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(usb_phy_roothub_alloc);
 
+/**
+ * usb_phy_roothub_alloc_usb3_phy - alloc the roothub
+ * @dev: the device of the host controller
+ *
+ * Allocate the usb phy roothub if the host use a generic usb3-phy.
+ *
+ * Return: On success, a pointer to the usb_phy_roothub. Otherwise,
+ * %NULL if no use usb3 phy or %-ENOMEM if out of memory.
+ */
+struct usb_phy_roothub *usb_phy_roothub_alloc_usb3_phy(struct device *dev)
+{
+	struct usb_phy_roothub *phy_roothub;
+	int num_phys;
+
+	if (!IS_ENABLED(CONFIG_GENERIC_PHY))
+		return NULL;
+
+	num_phys = of_count_phandle_with_args(dev->of_node, "phys",
+					      "#phy-cells");
+	if (num_phys <= 0)
+		return NULL;
+
+	phy_roothub = devm_kzalloc(dev, sizeof(*phy_roothub), GFP_KERNEL);
+	if (!phy_roothub)
+		return ERR_PTR(-ENOMEM);
+
+	INIT_LIST_HEAD(&phy_roothub->list);
+
+	if (!usb_phy_roothub_add_phy_by_name(dev, "usb3-phy", &phy_roothub->list))
+		return phy_roothub;
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(usb_phy_roothub_alloc_usb3_phy);
+
 int usb_phy_roothub_init(struct usb_phy_roothub *phy_roothub)
 {
 	struct usb_phy_roothub *roothub_entry;
@@ -172,6 +234,64 @@ int usb_phy_roothub_calibrate(struct usb_phy_roothub *phy_roothub)
 }
 EXPORT_SYMBOL_GPL(usb_phy_roothub_calibrate);
 
+/**
+ * usb_phy_roothub_notify_connect() - connect notification
+ * @phy_roothub: the phy of roothub, if the host use a generic phy.
+ * @port: the port index for connect
+ *
+ * If the phy needs to get connection status, the callback can be used.
+ * Returns: %0 if successful, a negative error code otherwise
+ */
+int usb_phy_roothub_notify_connect(struct usb_phy_roothub *phy_roothub, int port)
+{
+	struct usb_phy_roothub *roothub_entry;
+	struct list_head *head;
+	int err;
+
+	if (!phy_roothub)
+		return 0;
+
+	head = &phy_roothub->list;
+
+	list_for_each_entry(roothub_entry, head, list) {
+		err = phy_notify_connect(roothub_entry->phy, port);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_phy_roothub_notify_connect);
+
+/**
+ * usb_phy_roothub_notify_disconnect() - disconnect notification
+ * @phy_roothub: the phy of roothub, if the host use a generic phy.
+ * @port: the port index for disconnect
+ *
+ * If the phy needs to get connection status, the callback can be used.
+ * Returns: %0 if successful, a negative error code otherwise
+ */
+int usb_phy_roothub_notify_disconnect(struct usb_phy_roothub *phy_roothub, int port)
+{
+	struct usb_phy_roothub *roothub_entry;
+	struct list_head *head;
+	int err;
+
+	if (!phy_roothub)
+		return 0;
+
+	head = &phy_roothub->list;
+
+	list_for_each_entry(roothub_entry, head, list) {
+		err = phy_notify_disconnect(roothub_entry->phy, port);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_phy_roothub_notify_disconnect);
+
 int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub)
 {
 	struct usb_phy_roothub *roothub_entry;
diff --git a/drivers/usb/core/phy.h b/drivers/usb/core/phy.h
index 20a267cd98..88b49c0ea6 100644
--- a/drivers/usb/core/phy.h
+++ b/drivers/usb/core/phy.h
@@ -12,6 +12,7 @@ struct device;
 struct usb_phy_roothub;
 
 struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev);
+struct usb_phy_roothub *usb_phy_roothub_alloc_usb3_phy(struct device *dev);
 
 int usb_phy_roothub_init(struct usb_phy_roothub *phy_roothub);
 int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub);
@@ -19,6 +20,8 @@ int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub);
 int usb_phy_roothub_set_mode(struct usb_phy_roothub *phy_roothub,
 			     enum phy_mode mode);
 int usb_phy_roothub_calibrate(struct usb_phy_roothub *phy_roothub);
+int usb_phy_roothub_notify_connect(struct usb_phy_roothub *phy_roothub, int port);
+int usb_phy_roothub_notify_disconnect(struct usb_phy_roothub *phy_roothub, int port);
 int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub);
 void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub);
 
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index d34d67fcb4..e7da2fca11 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -11,6 +11,7 @@
 #include <linux/slab.h>
 #include <linux/pm_qos.h>
 #include <linux/component.h>
+#include <linux/usb/of.h>
 
 #include "hub.h"
 
@@ -465,7 +466,7 @@ static const struct dev_pm_ops usb_port_pm_ops = {
 #endif
 };
 
-struct device_type usb_port_device_type = {
+const struct device_type usb_port_device_type = {
 	.name =		"usb_port",
 	.release =	usb_port_device_release,
 	.pm =		&usb_port_pm_ops,
@@ -745,6 +746,7 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1)
 		return -ENOMEM;
 	}
 
+	port_dev->connect_type = usb_of_get_connect_type(hdev, port1);
 	hub->ports[port1 - 1] = port_dev;
 	port_dev->portnum = port1;
 	set_bit(port1, hub->power_bits);
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index f91f543ec6..d83231d673 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -273,9 +273,10 @@ static ssize_t avoid_reset_quirk_store(struct device *dev,
 				      const char *buf, size_t count)
 {
 	struct usb_device	*udev = to_usb_device(dev);
-	int			val, rc;
+	bool			val;
+	int			rc;
 
-	if (sscanf(buf, "%d", &val) != 1 || val < 0 || val > 1)
+	if (kstrtobool(buf, &val) != 0)
 		return -EINVAL;
 	rc = usb_lock_device_interruptible(udev);
 	if (rc < 0)
@@ -322,13 +323,14 @@ static ssize_t persist_store(struct device *dev, struct device_attribute *attr,
 			     const char *buf, size_t count)
 {
 	struct usb_device *udev = to_usb_device(dev);
-	int value, rc;
+	bool value;
+	int rc;
 
 	/* Hubs are always enabled for USB_PERSIST */
 	if (udev->descriptor.bDeviceClass == USB_CLASS_HUB)
 		return -EPERM;
 
-	if (sscanf(buf, "%d", &value) != 1)
+	if (kstrtobool(buf, &value) != 0)
 		return -EINVAL;
 
 	rc = usb_lock_device_interruptible(udev);
@@ -739,14 +741,14 @@ static ssize_t authorized_store(struct device *dev,
 {
 	ssize_t result;
 	struct usb_device *usb_dev = to_usb_device(dev);
-	unsigned val;
-	result = sscanf(buf, "%u\n", &val);
-	if (result != 1)
+	bool val;
+
+	if (kstrtobool(buf, &val) != 0)
 		result = -EINVAL;
-	else if (val == 0)
-		result = usb_deauthorize_device(usb_dev);
-	else
+	else if (val)
 		result = usb_authorize_device(usb_dev);
+	else
+		result = usb_deauthorize_device(usb_dev);
 	return result < 0 ? result : size;
 }
 static DEVICE_ATTR_IGNORE_LOCKDEP(authorized, S_IRUGO | S_IWUSR,
@@ -847,16 +849,10 @@ static const struct attribute_group dev_string_attr_grp = {
 	.is_visible =	dev_string_attrs_are_visible,
 };
 
-const struct attribute_group *usb_device_groups[] = {
-	&dev_attr_grp,
-	&dev_string_attr_grp,
-	NULL
-};
-
 /* Binary descriptors */
 
 static ssize_t
-read_descriptors(struct file *filp, struct kobject *kobj,
+descriptors_read(struct file *filp, struct kobject *kobj,
 		struct bin_attribute *attr,
 		char *buf, loff_t off, size_t count)
 {
@@ -878,7 +874,7 @@ read_descriptors(struct file *filp, struct kobject *kobj,
 			srclen = sizeof(struct usb_device_descriptor);
 		} else {
 			src = udev->rawdescriptors[cfgno];
-			srclen = __le16_to_cpu(udev->config[cfgno].desc.
+			srclen = le16_to_cpu(udev->config[cfgno].desc.
 					wTotalLength);
 		}
 		if (off < srclen) {
@@ -893,11 +889,69 @@ read_descriptors(struct file *filp, struct kobject *kobj,
 	}
 	return count - nleft;
 }
+static BIN_ATTR_RO(descriptors, 18 + 65535); /* dev descr + max-size raw descriptor */
+
+static ssize_t
+bos_descriptors_read(struct file *filp, struct kobject *kobj,
+		struct bin_attribute *attr,
+		char *buf, loff_t off, size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct usb_device *udev = to_usb_device(dev);
+	struct usb_host_bos *bos = udev->bos;
+	struct usb_bos_descriptor *desc;
+	size_t desclen, n = 0;
+
+	if (bos) {
+		desc = bos->desc;
+		desclen = le16_to_cpu(desc->wTotalLength);
+		if (off < desclen) {
+			n = min(count, desclen - (size_t) off);
+			memcpy(buf, (void *) desc + off, n);
+		}
+	}
+	return n;
+}
+static BIN_ATTR_RO(bos_descriptors, 65535); /* max-size BOS */
 
-static struct bin_attribute dev_bin_attr_descriptors = {
-	.attr = {.name = "descriptors", .mode = 0444},
-	.read = read_descriptors,
-	.size = 18 + 65535,	/* dev descr + max-size raw descriptor */
+/* When modifying this list, be sure to modify dev_bin_attrs_are_visible()
+ * accordingly.
+ */
+static struct bin_attribute *dev_bin_attrs[] = {
+	&bin_attr_descriptors,
+	&bin_attr_bos_descriptors,
+	NULL
+};
+
+static umode_t dev_bin_attrs_are_visible(struct kobject *kobj,
+		struct bin_attribute *a, int n)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct usb_device *udev = to_usb_device(dev);
+
+	/*
+	 * There's no need to check if the descriptors attribute should
+	 * be visible because all devices have a device descriptor. The
+	 * bos_descriptors attribute should be visible if and only if
+	 * the device has a BOS, so check if it exists here.
+	 */
+	if (a == &bin_attr_bos_descriptors) {
+		if (udev->bos == NULL)
+			return 0;
+	}
+	return a->attr.mode;
+}
+
+static const struct attribute_group dev_bin_attr_grp = {
+	.bin_attrs =		dev_bin_attrs,
+	.is_bin_visible =	dev_bin_attrs_are_visible,
+};
+
+const struct attribute_group *usb_device_groups[] = {
+	&dev_attr_grp,
+	&dev_string_attr_grp,
+	&dev_bin_attr_grp,
+	NULL
 };
 
 /*
@@ -1015,10 +1069,6 @@ int usb_create_sysfs_dev_files(struct usb_device *udev)
 	struct device *dev = &udev->dev;
 	int retval;
 
-	retval = device_create_bin_file(dev, &dev_bin_attr_descriptors);
-	if (retval)
-		goto error;
-
 	retval = add_persist_attributes(dev);
 	if (retval)
 		goto error;
@@ -1048,7 +1098,6 @@ void usb_remove_sysfs_dev_files(struct usb_device *udev)
 
 	remove_power_attributes(dev);
 	remove_persist_attributes(dev);
-	device_remove_bin_file(dev, &dev_bin_attr_descriptors);
 }
 
 /* Interface Association Descriptor fields */
diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c
index a34b22537d..7f8a912d4f 100644
--- a/drivers/usb/core/usb-acpi.c
+++ b/drivers/usb/core/usb-acpi.c
@@ -142,12 +142,19 @@ int usb_acpi_set_power_state(struct usb_device *hdev, int index, bool enable)
 }
 EXPORT_SYMBOL_GPL(usb_acpi_set_power_state);
 
-static enum usb_port_connect_type usb_acpi_get_connect_type(acpi_handle handle,
-		struct acpi_pld_info *pld)
+/*
+ * Private to usb-acpi, all the core needs to know is that
+ * port_dev->location is non-zero when it has been set by the firmware.
+ */
+#define USB_ACPI_LOCATION_VALID (1 << 31)
+
+static void
+usb_acpi_get_connect_type(struct usb_port *port_dev, acpi_handle *handle)
 {
 	enum usb_port_connect_type connect_type = USB_PORT_CONNECT_TYPE_UNKNOWN;
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 	union acpi_object *upc = NULL;
+	struct acpi_pld_info *pld = NULL;
 	acpi_status status;
 
 	/*
@@ -158,6 +165,12 @@ static enum usb_port_connect_type usb_acpi_get_connect_type(acpi_handle handle,
 	 * a usb device is directly hard-wired to the port. If no visible and
 	 * no connectable, the port would be not used.
 	 */
+
+	status = acpi_get_physical_device_location(handle, &pld);
+	if (ACPI_SUCCESS(status) && pld)
+		port_dev->location = USB_ACPI_LOCATION_VALID |
+			pld->group_token << 8 | pld->group_position;
+
 	status = acpi_evaluate_object(handle, "_UPC", NULL, &buffer);
 	if (ACPI_FAILURE(status))
 		goto out;
@@ -166,25 +179,22 @@ static enum usb_port_connect_type usb_acpi_get_connect_type(acpi_handle handle,
 	if (!upc || (upc->type != ACPI_TYPE_PACKAGE) || upc->package.count != 4)
 		goto out;
 
+	/* UPC states port is connectable */
 	if (upc->package.elements[0].integer.value)
-		if (pld->user_visible)
+		if (!pld)
+			; /* keep connect_type as unknown */
+		else if (pld->user_visible)
 			connect_type = USB_PORT_CONNECT_TYPE_HOT_PLUG;
 		else
 			connect_type = USB_PORT_CONNECT_TYPE_HARD_WIRED;
-	else if (!pld->user_visible)
+	else
 		connect_type = USB_PORT_NOT_USED;
 out:
+	port_dev->connect_type = connect_type;
 	kfree(upc);
-	return connect_type;
+	ACPI_FREE(pld);
 }
 
-
-/*
- * Private to usb-acpi, all the core needs to know is that
- * port_dev->location is non-zero when it has been set by the firmware.
- */
-#define USB_ACPI_LOCATION_VALID (1 << 31)
-
 static struct acpi_device *
 usb_acpi_get_companion_for_port(struct usb_port *port_dev)
 {
@@ -222,22 +232,12 @@ static struct acpi_device *
 usb_acpi_find_companion_for_port(struct usb_port *port_dev)
 {
 	struct acpi_device *adev;
-	struct acpi_pld_info *pld;
-	acpi_handle *handle;
-	acpi_status status;
 
 	adev = usb_acpi_get_companion_for_port(port_dev);
 	if (!adev)
 		return NULL;
 
-	handle = adev->handle;
-	status = acpi_get_physical_device_location(handle, &pld);
-	if (ACPI_SUCCESS(status) && pld) {
-		port_dev->location = USB_ACPI_LOCATION_VALID
-			| pld->group_token << 8 | pld->group_position;
-		port_dev->connect_type = usb_acpi_get_connect_type(handle, pld);
-		ACPI_FREE(pld);
-	}
+	usb_acpi_get_connect_type(port_dev, adev->handle);
 
 	return adev;
 }
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index dc8d9228a5..a0c432b14b 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -592,7 +592,7 @@ static char *usb_devnode(const struct device *dev,
 			 usb_dev->bus->busnum, usb_dev->devnum);
 }
 
-struct device_type usb_device_type = {
+const struct device_type usb_device_type = {
 	.name =		"usb_device",
 	.release =	usb_release_dev,
 	.uevent =	usb_dev_uevent,
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index bfecb50773..b8324ea05b 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -144,10 +144,10 @@ static inline int usb_disable_usb2_hardware_lpm(struct usb_device *udev)
 extern const struct class usbmisc_class;
 extern const struct bus_type usb_bus_type;
 extern struct mutex usb_port_peer_mutex;
-extern struct device_type usb_device_type;
-extern struct device_type usb_if_device_type;
-extern struct device_type usb_ep_device_type;
-extern struct device_type usb_port_device_type;
+extern const struct device_type usb_device_type;
+extern const struct device_type usb_if_device_type;
+extern const struct device_type usb_ep_device_type;
+extern const struct device_type usb_port_device_type;
 extern struct usb_device_driver usb_generic_driver;
 
 static inline int is_usb_device(const struct device *dev)
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 5fc27b20df..31078f3d41 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -131,7 +131,7 @@ config USB_DWC3_QCOM
 	tristate "Qualcomm Platform"
 	depends on ARCH_QCOM || COMPILE_TEST
 	depends on EXTCON || !EXTCON
-	depends on (OF || ACPI)
+	depends on OF
 	default USB_DWC3
 	help
 	  Some Qualcomm SoCs use DesignWare Core IP for USB2/3
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index d96a28eecb..180dd8d292 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -755,6 +755,7 @@ struct dwc3_ep {
 #define DWC3_EP_PENDING_CLEAR_STALL	BIT(11)
 #define DWC3_EP_TXFIFO_RESIZED		BIT(12)
 #define DWC3_EP_DELAY_STOP             BIT(13)
+#define DWC3_EP_RESOURCE_ALLOCATED	BIT(14)
 
 	/* This last one is specific to EP0 */
 #define DWC3_EP0_DIR_IN			BIT(31)
@@ -1258,6 +1259,7 @@ struct dwc3 {
 #define DWC31_REVISION_170A	0x3137302a
 #define DWC31_REVISION_180A	0x3138302a
 #define DWC31_REVISION_190A	0x3139302a
+#define DWC31_REVISION_200A	0x3230302a
 
 #define DWC32_REVISION_ANY	0x0
 #define DWC32_REVISION_100A	0x3130302a
diff --git a/drivers/usb/dwc3/dwc3-am62.c b/drivers/usb/dwc3/dwc3-am62.c
index ea6e29091c..fad151e78f 100644
--- a/drivers/usb/dwc3/dwc3-am62.c
+++ b/drivers/usb/dwc3/dwc3-am62.c
@@ -97,9 +97,15 @@
 #define USBSS_VBUS_STAT_SESSVALID	BIT(2)
 #define USBSS_VBUS_STAT_VBUSVALID	BIT(0)
 
-/* Mask for PHY PLL REFCLK */
+/* USB_PHY_CTRL register bits in CTRL_MMR */
+#define PHY_CORE_VOLTAGE_MASK	BIT(31)
 #define PHY_PLL_REFCLK_MASK	GENMASK(3, 0)
 
+/* USB PHY2 register offsets */
+#define	USB_PHY_PLL_REG12		0x130
+#define	USB_PHY_PLL_LDO_REF_EN		BIT(5)
+#define	USB_PHY_PLL_LDO_REF_EN_EN	BIT(4)
+
 #define DWC3_AM62_AUTOSUSPEND_DELAY	100
 
 struct dwc3_am62 {
@@ -162,6 +168,13 @@ static int phy_syscon_pll_refclk(struct dwc3_am62 *am62)
 
 	am62->offset = args.args[0];
 
+	/* Core voltage. PHY_CORE_VOLTAGE bit Recommended to be 0 always */
+	ret = regmap_update_bits(am62->syscon, am62->offset, PHY_CORE_VOLTAGE_MASK, 0);
+	if (ret) {
+		dev_err(dev, "failed to set phy core voltage\n");
+		return ret;
+	}
+
 	ret = regmap_update_bits(am62->syscon, am62->offset, PHY_PLL_REFCLK_MASK, am62->rate_code);
 	if (ret) {
 		dev_err(dev, "failed to set phy pll reference clock rate\n");
@@ -176,8 +189,9 @@ static int dwc3_ti_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *node = pdev->dev.of_node;
 	struct dwc3_am62 *am62;
-	int i, ret;
 	unsigned long rate;
+	void __iomem *phy;
+	int i, ret;
 	u32 reg;
 
 	am62 = devm_kzalloc(dev, sizeof(*am62), GFP_KERNEL);
@@ -219,6 +233,17 @@ static int dwc3_ti_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	/* Workaround Errata i2409 */
+	phy = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(phy)) {
+		dev_err(dev, "can't map PHY IOMEM resource. Won't apply i2409 fix.\n");
+		phy = NULL;
+	} else {
+		reg = readl(phy + USB_PHY_PLL_REG12);
+		reg |= USB_PHY_PLL_LDO_REF_EN | USB_PHY_PLL_LDO_REF_EN_EN;
+		writel(reg, phy + USB_PHY_PLL_REG12);
+	}
+
 	/* VBUS divider select */
 	am62->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider");
 	reg = dwc3_ti_readl(am62, USBSS_PHY_CONFIG);
diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
index d1539fc9ea..be7be00ecb 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -52,8 +52,7 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
 	if (of_device_is_compatible(np, "rockchip,rk3399-dwc3"))
 		simple->need_reset = true;
 
-	simple->resets = of_reset_control_array_get(np, false, true,
-						    true);
+	simple->resets = of_reset_control_array_get_optional_exclusive(np);
 	if (IS_ERR(simple->resets)) {
 		ret = PTR_ERR(simple->resets);
 		dev_err(dev, "failed to get device resets, err=%d\n", ret);
@@ -173,6 +172,7 @@ static const struct of_device_id of_dwc3_simple_match[] = {
 	{ .compatible = "sprd,sc9860-dwc3" },
 	{ .compatible = "allwinner,sun50i-h6-dwc3" },
 	{ .compatible = "hisilicon,hi3670-dwc3" },
+	{ .compatible = "hisilicon,hi3798mv200-dwc3" },
 	{ .compatible = "intel,keembay-dwc3" },
 	{ /* Sentinel */ }
 };
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 497deed38c..9ef821ca2f 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -8,6 +8,7 @@
  *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
  */
 
+#include <linux/dmi.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -220,6 +221,7 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc,
 
 		if (pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
 			struct gpio_desc *gpio;
+			const char *bios_ver;
 			int ret;
 
 			/* On BYT the FW does not always enable the refclock */
@@ -277,8 +279,12 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc,
 			 * detection. These can be identified by them _not_
 			 * using the standard ACPI battery and ac drivers.
 			 */
+			bios_ver = dmi_get_system_info(DMI_BIOS_VERSION);
 			if (acpi_dev_present("INT33FD", "1", 2) &&
-			    acpi_quirk_skip_acpi_ac_and_battery()) {
+			    acpi_quirk_skip_acpi_ac_and_battery() &&
+			    /* Lenovo Yoga Tablet 2 Pro 1380 uses LC824206XA instead */
+			    !(bios_ver &&
+			      strstarts(bios_ver, "BLADE_21.X64.0005.R00.1504101516"))) {
 				dev_info(&pdev->dev, "Using TUSB1211 phy for charger detection\n");
 				swnode = &dwc3_pci_intel_phy_charger_detect_swnode;
 			}
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index dbd6a5b2b2..f6b2fab49d 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -4,7 +4,6 @@
  * Inspired by dwc3-of-simple.c
  */
 
-#include <linux/acpi.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/clk.h>
@@ -53,22 +52,10 @@
 #define APPS_USB_AVG_BW 0
 #define APPS_USB_PEAK_BW MBps_to_icc(40)
 
-struct dwc3_acpi_pdata {
-	u32			qscratch_base_offset;
-	u32			qscratch_base_size;
-	u32			dwc3_core_base_size;
-	int			qusb2_phy_irq_index;
-	int			dp_hs_phy_irq_index;
-	int			dm_hs_phy_irq_index;
-	int			ss_phy_irq_index;
-	bool			is_urs;
-};
-
 struct dwc3_qcom {
 	struct device		*dev;
 	void __iomem		*qscratch_base;
 	struct platform_device	*dwc3;
-	struct platform_device	*urs_usb;
 	struct clk		**clks;
 	int			num_clocks;
 	struct reset_control	*resets;
@@ -84,8 +71,6 @@ struct dwc3_qcom {
 	struct notifier_block	vbus_nb;
 	struct notifier_block	host_nb;
 
-	const struct dwc3_acpi_pdata *acpi_pdata;
-
 	enum usb_dr_mode	mode;
 	bool			is_suspended;
 	bool			pm_suspended;
@@ -248,9 +233,6 @@ static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom)
 	struct device *dev = qcom->dev;
 	int ret;
 
-	if (has_acpi_companion(dev))
-		return 0;
-
 	qcom->icc_path_ddr = of_icc_get(dev, "usb-ddr");
 	if (IS_ERR(qcom->icc_path_ddr)) {
 		return dev_err_probe(dev, PTR_ERR(qcom->icc_path_ddr),
@@ -519,31 +501,13 @@ static void dwc3_qcom_select_utmi_clk(struct dwc3_qcom *qcom)
 			  PIPE_UTMI_CLK_DIS);
 }
 
-static int dwc3_qcom_get_irq(struct platform_device *pdev,
-			     const char *name, int num)
-{
-	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
-	struct platform_device *pdev_irq = qcom->urs_usb ? qcom->urs_usb : pdev;
-	struct device_node *np = pdev->dev.of_node;
-	int ret;
-
-	if (np)
-		ret = platform_get_irq_byname_optional(pdev_irq, name);
-	else
-		ret = platform_get_irq_optional(pdev_irq, num);
-
-	return ret;
-}
-
 static int dwc3_qcom_setup_irq(struct platform_device *pdev)
 {
 	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
-	const struct dwc3_acpi_pdata *pdata = qcom->acpi_pdata;
 	int irq;
 	int ret;
 
-	irq = dwc3_qcom_get_irq(pdev, "qusb2_phy",
-				pdata ? pdata->qusb2_phy_irq_index : -1);
+	irq = platform_get_irq_byname_optional(pdev, "qusb2_phy");
 	if (irq > 0) {
 		/* Keep wakeup interrupts disabled until suspend */
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
@@ -557,8 +521,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
 		qcom->qusb2_phy_irq = irq;
 	}
 
-	irq = dwc3_qcom_get_irq(pdev, "dp_hs_phy_irq",
-				pdata ? pdata->dp_hs_phy_irq_index : -1);
+	irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_irq");
 	if (irq > 0) {
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 					qcom_dwc3_resume_irq,
@@ -571,8 +534,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
 		qcom->dp_hs_phy_irq = irq;
 	}
 
-	irq = dwc3_qcom_get_irq(pdev, "dm_hs_phy_irq",
-				pdata ? pdata->dm_hs_phy_irq_index : -1);
+	irq = platform_get_irq_byname_optional(pdev, "dm_hs_phy_irq");
 	if (irq > 0) {
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 					qcom_dwc3_resume_irq,
@@ -585,8 +547,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
 		qcom->dm_hs_phy_irq = irq;
 	}
 
-	irq = dwc3_qcom_get_irq(pdev, "ss_phy_irq",
-				pdata ? pdata->ss_phy_irq_index : -1);
+	irq = platform_get_irq_byname_optional(pdev, "ss_phy_irq");
 	if (irq > 0) {
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 					qcom_dwc3_resume_irq,
@@ -649,88 +610,6 @@ static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count)
 	return 0;
 }
 
-static const struct property_entry dwc3_qcom_acpi_properties[] = {
-	PROPERTY_ENTRY_STRING("dr_mode", "host"),
-	{}
-};
-
-static const struct software_node dwc3_qcom_swnode = {
-	.properties = dwc3_qcom_acpi_properties,
-};
-
-static int dwc3_qcom_acpi_register_core(struct platform_device *pdev)
-{
-	struct dwc3_qcom	*qcom = platform_get_drvdata(pdev);
-	struct device		*dev = &pdev->dev;
-	struct resource		*res, *child_res = NULL;
-	struct platform_device	*pdev_irq = qcom->urs_usb ? qcom->urs_usb :
-							    pdev;
-	int			irq;
-	int			ret;
-
-	qcom->dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
-	if (!qcom->dwc3)
-		return -ENOMEM;
-
-	qcom->dwc3->dev.parent = dev;
-	qcom->dwc3->dev.type = dev->type;
-	qcom->dwc3->dev.dma_mask = dev->dma_mask;
-	qcom->dwc3->dev.dma_parms = dev->dma_parms;
-	qcom->dwc3->dev.coherent_dma_mask = dev->coherent_dma_mask;
-
-	child_res = kcalloc(2, sizeof(*child_res), GFP_KERNEL);
-	if (!child_res) {
-		platform_device_put(qcom->dwc3);
-		return -ENOMEM;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "failed to get memory resource\n");
-		ret = -ENODEV;
-		goto out;
-	}
-
-	child_res[0].flags = res->flags;
-	child_res[0].start = res->start;
-	child_res[0].end = child_res[0].start +
-		qcom->acpi_pdata->dwc3_core_base_size;
-
-	irq = platform_get_irq(pdev_irq, 0);
-	if (irq < 0) {
-		ret = irq;
-		goto out;
-	}
-	child_res[1].flags = IORESOURCE_IRQ;
-	child_res[1].start = child_res[1].end = irq;
-
-	ret = platform_device_add_resources(qcom->dwc3, child_res, 2);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add resources\n");
-		goto out;
-	}
-
-	ret = device_add_software_node(&qcom->dwc3->dev, &dwc3_qcom_swnode);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to add properties\n");
-		goto out;
-	}
-
-	ret = platform_device_add(qcom->dwc3);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add device\n");
-		device_remove_software_node(&qcom->dwc3->dev);
-		goto out;
-	}
-	kfree(child_res);
-	return 0;
-
-out:
-	platform_device_put(qcom->dwc3);
-	kfree(child_res);
-	return ret;
-}
-
 static int dwc3_qcom_of_register_core(struct platform_device *pdev)
 {
 	struct dwc3_qcom	*qcom = platform_get_drvdata(pdev);
@@ -763,57 +642,12 @@ node_put:
 	return ret;
 }
 
-static struct platform_device *dwc3_qcom_create_urs_usb_platdev(struct device *dev)
-{
-	struct platform_device *urs_usb = NULL;
-	struct fwnode_handle *fwh;
-	struct acpi_device *adev;
-	char name[8];
-	int ret;
-	int id;
-
-	/* Figure out device id */
-	ret = sscanf(fwnode_get_name(dev->fwnode), "URS%d", &id);
-	if (!ret)
-		return NULL;
-
-	/* Find the child using name */
-	snprintf(name, sizeof(name), "USB%d", id);
-	fwh = fwnode_get_named_child_node(dev->fwnode, name);
-	if (!fwh)
-		return NULL;
-
-	adev = to_acpi_device_node(fwh);
-	if (!adev)
-		goto err_put_handle;
-
-	urs_usb = acpi_create_platform_device(adev, NULL);
-	if (IS_ERR_OR_NULL(urs_usb))
-		goto err_put_handle;
-
-	return urs_usb;
-
-err_put_handle:
-	fwnode_handle_put(fwh);
-
-	return urs_usb;
-}
-
-static void dwc3_qcom_destroy_urs_usb_platdev(struct platform_device *urs_usb)
-{
-	struct fwnode_handle *fwh = urs_usb->dev.fwnode;
-
-	platform_device_unregister(urs_usb);
-	fwnode_handle_put(fwh);
-}
-
 static int dwc3_qcom_probe(struct platform_device *pdev)
 {
 	struct device_node	*np = pdev->dev.of_node;
 	struct device		*dev = &pdev->dev;
 	struct dwc3_qcom	*qcom;
-	struct resource		*res, *parent_res = NULL;
-	struct resource		local_res;
+	struct resource		*res;
 	int			ret, i;
 	bool			ignore_pipe_clk;
 	bool			wakeup_source;
@@ -825,14 +659,6 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, qcom);
 	qcom->dev = &pdev->dev;
 
-	if (has_acpi_companion(dev)) {
-		qcom->acpi_pdata = acpi_device_get_match_data(dev);
-		if (!qcom->acpi_pdata) {
-			dev_err(&pdev->dev, "no supporting ACPI device data\n");
-			return -EINVAL;
-		}
-	}
-
 	qcom->resets = devm_reset_control_array_get_optional_exclusive(dev);
 	if (IS_ERR(qcom->resets)) {
 		return dev_err_probe(&pdev->dev, PTR_ERR(qcom->resets),
@@ -861,40 +687,16 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
-	if (np) {
-		parent_res = res;
-	} else {
-		memcpy(&local_res, res, sizeof(struct resource));
-		parent_res = &local_res;
-
-		parent_res->start = res->start +
-			qcom->acpi_pdata->qscratch_base_offset;
-		parent_res->end = parent_res->start +
-			qcom->acpi_pdata->qscratch_base_size;
-
-		if (qcom->acpi_pdata->is_urs) {
-			qcom->urs_usb = dwc3_qcom_create_urs_usb_platdev(dev);
-			if (IS_ERR_OR_NULL(qcom->urs_usb)) {
-				dev_err(dev, "failed to create URS USB platdev\n");
-				if (!qcom->urs_usb)
-					ret = -ENODEV;
-				else
-					ret = PTR_ERR(qcom->urs_usb);
-				goto clk_disable;
-			}
-		}
-	}
-
-	qcom->qscratch_base = devm_ioremap_resource(dev, parent_res);
+	qcom->qscratch_base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(qcom->qscratch_base)) {
 		ret = PTR_ERR(qcom->qscratch_base);
-		goto free_urs;
+		goto clk_disable;
 	}
 
 	ret = dwc3_qcom_setup_irq(pdev);
 	if (ret) {
 		dev_err(dev, "failed to setup IRQs, err=%d\n", ret);
-		goto free_urs;
+		goto clk_disable;
 	}
 
 	/*
@@ -906,14 +708,10 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 	if (ignore_pipe_clk)
 		dwc3_qcom_select_utmi_clk(qcom);
 
-	if (np)
-		ret = dwc3_qcom_of_register_core(pdev);
-	else
-		ret = dwc3_qcom_acpi_register_core(pdev);
-
+	ret = dwc3_qcom_of_register_core(pdev);
 	if (ret) {
 		dev_err(dev, "failed to register DWC3 Core, err=%d\n", ret);
-		goto free_urs;
+		goto clk_disable;
 	}
 
 	ret = dwc3_qcom_interconnect_init(qcom);
@@ -945,16 +743,8 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 interconnect_exit:
 	dwc3_qcom_interconnect_exit(qcom);
 depopulate:
-	if (np) {
-		of_platform_depopulate(&pdev->dev);
-	} else {
-		device_remove_software_node(&qcom->dwc3->dev);
-		platform_device_del(qcom->dwc3);
-	}
+	of_platform_depopulate(&pdev->dev);
 	platform_device_put(qcom->dwc3);
-free_urs:
-	if (qcom->urs_usb)
-		dwc3_qcom_destroy_urs_usb_platdev(qcom->urs_usb);
 clk_disable:
 	for (i = qcom->num_clocks - 1; i >= 0; i--) {
 		clk_disable_unprepare(qcom->clks[i]);
@@ -969,21 +759,12 @@ reset_assert:
 static void dwc3_qcom_remove(struct platform_device *pdev)
 {
 	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
-	struct device_node *np = pdev->dev.of_node;
 	struct device *dev = &pdev->dev;
 	int i;
 
-	if (np) {
-		of_platform_depopulate(&pdev->dev);
-	} else {
-		device_remove_software_node(&qcom->dwc3->dev);
-		platform_device_del(qcom->dwc3);
-	}
+	of_platform_depopulate(&pdev->dev);
 	platform_device_put(qcom->dwc3);
 
-	if (qcom->urs_usb)
-		dwc3_qcom_destroy_urs_usb_platdev(qcom->urs_usb);
-
 	for (i = qcom->num_clocks - 1; i >= 0; i--) {
 		clk_disable_unprepare(qcom->clks[i]);
 		clk_put(qcom->clks[i]);
@@ -1053,38 +834,6 @@ static const struct of_device_id dwc3_qcom_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, dwc3_qcom_of_match);
 
-#ifdef CONFIG_ACPI
-static const struct dwc3_acpi_pdata sdm845_acpi_pdata = {
-	.qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
-	.qscratch_base_size = SDM845_QSCRATCH_SIZE,
-	.dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
-	.qusb2_phy_irq_index = 1,
-	.dp_hs_phy_irq_index = 4,
-	.dm_hs_phy_irq_index = 3,
-	.ss_phy_irq_index = 2
-};
-
-static const struct dwc3_acpi_pdata sdm845_acpi_urs_pdata = {
-	.qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
-	.qscratch_base_size = SDM845_QSCRATCH_SIZE,
-	.dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
-	.qusb2_phy_irq_index = 1,
-	.dp_hs_phy_irq_index = 4,
-	.dm_hs_phy_irq_index = 3,
-	.ss_phy_irq_index = 2,
-	.is_urs = true,
-};
-
-static const struct acpi_device_id dwc3_qcom_acpi_match[] = {
-	{ "QCOM2430", (unsigned long)&sdm845_acpi_pdata },
-	{ "QCOM0304", (unsigned long)&sdm845_acpi_urs_pdata },
-	{ "QCOM0497", (unsigned long)&sdm845_acpi_urs_pdata },
-	{ "QCOM04A6", (unsigned long)&sdm845_acpi_pdata },
-	{ },
-};
-MODULE_DEVICE_TABLE(acpi, dwc3_qcom_acpi_match);
-#endif
-
 static struct platform_driver dwc3_qcom_driver = {
 	.probe		= dwc3_qcom_probe,
 	.remove_new	= dwc3_qcom_remove,
@@ -1092,7 +841,6 @@ static struct platform_driver dwc3_qcom_driver = {
 		.name	= "dwc3-qcom",
 		.pm	= &dwc3_qcom_dev_pm_ops,
 		.of_match_table	= dwc3_qcom_of_match,
-		.acpi_match_table = ACPI_PTR(dwc3_qcom_acpi_match),
 	},
 };
 
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 6ae8a36f21..d96ffbe520 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -226,7 +226,8 @@ void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
 
 	/* reinitialize physical ep1 */
 	dep = dwc->eps[1];
-	dep->flags = DWC3_EP_ENABLED;
+	dep->flags &= DWC3_EP_RESOURCE_ALLOCATED;
+	dep->flags |= DWC3_EP_ENABLED;
 
 	/* stall is always issued on EP0 */
 	dep = dwc->eps[0];
@@ -646,6 +647,7 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 		return -EINVAL;
 
 	case USB_STATE_ADDRESS:
+		dwc3_gadget_start_config(dwc, 2);
 		dwc3_gadget_clear_tx_fifos(dwc);
 
 		ret = dwc3_ep0_delegate_req(dwc, ctrl);
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 579d90efc2..89fc690fdf 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -519,77 +519,56 @@ static void dwc3_free_trb_pool(struct dwc3_ep *dep)
 static int dwc3_gadget_set_xfer_resource(struct dwc3_ep *dep)
 {
 	struct dwc3_gadget_ep_cmd_params params;
+	int ret;
+
+	if (dep->flags & DWC3_EP_RESOURCE_ALLOCATED)
+		return 0;
 
 	memset(&params, 0x00, sizeof(params));
 
 	params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1);
 
-	return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETTRANSFRESOURCE,
+	ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETTRANSFRESOURCE,
 			&params);
+	if (ret)
+		return ret;
+
+	dep->flags |= DWC3_EP_RESOURCE_ALLOCATED;
+	return 0;
 }
 
 /**
- * dwc3_gadget_start_config - configure ep resources
- * @dep: endpoint that is being enabled
- *
- * Issue a %DWC3_DEPCMD_DEPSTARTCFG command to @dep. After the command's
- * completion, it will set Transfer Resource for all available endpoints.
- *
- * The assignment of transfer resources cannot perfectly follow the data book
- * due to the fact that the controller driver does not have all knowledge of the
- * configuration in advance. It is given this information piecemeal by the
- * composite gadget framework after every SET_CONFIGURATION and
- * SET_INTERFACE. Trying to follow the databook programming model in this
- * scenario can cause errors. For two reasons:
- *
- * 1) The databook says to do %DWC3_DEPCMD_DEPSTARTCFG for every
- * %USB_REQ_SET_CONFIGURATION and %USB_REQ_SET_INTERFACE (8.1.5). This is
- * incorrect in the scenario of multiple interfaces.
- *
- * 2) The databook does not mention doing more %DWC3_DEPCMD_DEPXFERCFG for new
- * endpoint on alt setting (8.1.6).
- *
- * The following simplified method is used instead:
+ * dwc3_gadget_start_config - reset endpoint resources
+ * @dwc: pointer to the DWC3 context
+ * @resource_index: DEPSTARTCFG.XferRscIdx value (must be 0 or 2)
  *
- * All hardware endpoints can be assigned a transfer resource and this setting
- * will stay persistent until either a core reset or hibernation. So whenever we
- * do a %DWC3_DEPCMD_DEPSTARTCFG(0) we can go ahead and do
- * %DWC3_DEPCMD_DEPXFERCFG for every hardware endpoint as well. We are
- * guaranteed that there are as many transfer resources as endpoints.
+ * Set resource_index=0 to reset all endpoints' resources allocation. Do this as
+ * part of the power-on/soft-reset initialization.
  *
- * This function is called for each endpoint when it is being enabled but is
- * triggered only when called for EP0-out, which always happens first, and which
- * should only happen in one of the above conditions.
+ * Set resource_index=2 to reset only non-control endpoints' resources. Do this
+ * on receiving the SET_CONFIGURATION request or hibernation resume.
  */
-static int dwc3_gadget_start_config(struct dwc3_ep *dep)
+int dwc3_gadget_start_config(struct dwc3 *dwc, unsigned int resource_index)
 {
 	struct dwc3_gadget_ep_cmd_params params;
-	struct dwc3		*dwc;
 	u32			cmd;
 	int			i;
 	int			ret;
 
-	if (dep->number)
-		return 0;
+	if (resource_index != 0 && resource_index != 2)
+		return -EINVAL;
 
 	memset(&params, 0x00, sizeof(params));
 	cmd = DWC3_DEPCMD_DEPSTARTCFG;
-	dwc = dep->dwc;
+	cmd |= DWC3_DEPCMD_PARAM(resource_index);
 
-	ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
+	ret = dwc3_send_gadget_ep_cmd(dwc->eps[0], cmd, &params);
 	if (ret)
 		return ret;
 
-	for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) {
-		struct dwc3_ep *dep = dwc->eps[i];
-
-		if (!dep)
-			continue;
-
-		ret = dwc3_gadget_set_xfer_resource(dep);
-		if (ret)
-			return ret;
-	}
+	/* Reset resource allocation flags */
+	for (i = resource_index; i < dwc->num_eps && dwc->eps[i]; i++)
+		dwc->eps[i]->flags &= ~DWC3_EP_RESOURCE_ALLOCATED;
 
 	return 0;
 }
@@ -884,16 +863,18 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action)
 		ret = dwc3_gadget_resize_tx_fifos(dep);
 		if (ret)
 			return ret;
-
-		ret = dwc3_gadget_start_config(dep);
-		if (ret)
-			return ret;
 	}
 
 	ret = dwc3_gadget_set_ep_config(dep, action);
 	if (ret)
 		return ret;
 
+	if (!(dep->flags & DWC3_EP_RESOURCE_ALLOCATED)) {
+		ret = dwc3_gadget_set_xfer_resource(dep);
+		if (ret)
+			return ret;
+	}
+
 	if (!(dep->flags & DWC3_EP_ENABLED)) {
 		struct dwc3_trb	*trb_st_hw;
 		struct dwc3_trb	*trb_link;
@@ -1047,7 +1028,7 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
 
 	dep->stream_capable = false;
 	dep->type = 0;
-	mask = DWC3_EP_TXFIFO_RESIZED;
+	mask = DWC3_EP_TXFIFO_RESIZED | DWC3_EP_RESOURCE_ALLOCATED;
 	/*
 	 * dwc3_remove_requests() can exit early if DWC3 EP delayed stop is
 	 * set.  Do not clear DEP flags, so that the end transfer command will
@@ -2911,6 +2892,12 @@ static int __dwc3_gadget_start(struct dwc3 *dwc)
 	/* Start with SuperSpeed Default */
 	dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
 
+	ret = dwc3_gadget_start_config(dwc, 0);
+	if (ret) {
+		dev_err(dwc->dev, "failed to config endpoints\n");
+		return ret;
+	}
+
 	dep = dwc->eps[0];
 	dep->flags = 0;
 	ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_INIT);
@@ -3433,7 +3420,7 @@ static int dwc3_gadget_ep_reclaim_trb_sg(struct dwc3_ep *dep,
 		struct dwc3_request *req, const struct dwc3_event_depevt *event,
 		int status)
 {
-	struct dwc3_trb *trb = &dep->trb_pool[dep->trb_dequeue];
+	struct dwc3_trb *trb;
 	struct scatterlist *sg = req->sg;
 	struct scatterlist *s;
 	unsigned int num_queued = req->num_queued_sgs;
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index 55a56cf67d..d73e735e40 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -119,6 +119,7 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
 int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol);
 void dwc3_ep0_send_delayed_status(struct dwc3 *dwc);
 void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool interrupt);
+int dwc3_gadget_start_config(struct dwc3 *dwc, unsigned int resource_index);
 
 /**
  * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index 6c143f7d24..a171b27a78 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -13,9 +13,53 @@
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
 
+#include "../host/xhci-port.h"
+#include "../host/xhci-ext-caps.h"
+#include "../host/xhci-caps.h"
 #include "../host/xhci-plat.h"
 #include "core.h"
 
+#define XHCI_HCSPARAMS1		0x4
+#define XHCI_PORTSC_BASE	0x400
+
+/**
+ * dwc3_power_off_all_roothub_ports - Power off all Root hub ports
+ * @dwc: Pointer to our controller context structure
+ */
+static void dwc3_power_off_all_roothub_ports(struct dwc3 *dwc)
+{
+	void __iomem *xhci_regs;
+	u32 op_regs_base;
+	int port_num;
+	u32 offset;
+	u32 reg;
+	int i;
+
+	/* xhci regs is not mapped yet, do it temperary here */
+	if (dwc->xhci_resources[0].start) {
+		xhci_regs = ioremap(dwc->xhci_resources[0].start, DWC3_XHCI_REGS_END);
+		if (!xhci_regs) {
+			dev_err(dwc->dev, "Failed to ioremap xhci_regs\n");
+			return;
+		}
+
+		op_regs_base = HC_LENGTH(readl(xhci_regs));
+		reg = readl(xhci_regs + XHCI_HCSPARAMS1);
+		port_num = HCS_MAX_PORTS(reg);
+
+		for (i = 1; i <= port_num; i++) {
+			offset = op_regs_base + XHCI_PORTSC_BASE + 0x10 * (i - 1);
+			reg = readl(xhci_regs + offset);
+			reg &= ~PORT_POWER;
+			writel(reg, xhci_regs + offset);
+		}
+
+		iounmap(xhci_regs);
+	} else {
+		dev_err(dwc->dev, "xhci base reg invalid\n");
+	}
+}
+
 static void dwc3_xhci_plat_start(struct usb_hcd *hcd)
 {
 	struct platform_device *pdev;
@@ -87,6 +131,12 @@ int dwc3_host_init(struct dwc3 *dwc)
 	int			ret, irq;
 	int			prop_idx = 0;
 
+	/*
+	 * Some platforms need to power off all Root hub ports immediately after DWC3 set to host
+	 * mode to avoid VBUS glitch happen when xhci get reset later.
+	 */
+	dwc3_power_off_all_roothub_ports(dwc);
+
 	irq = dwc3_host_get_irq(dwc);
 	if (irq < 0)
 		return irq;
diff --git a/drivers/usb/fotg210/fotg210-core.c b/drivers/usb/fotg210/fotg210-core.c
index 958fc40eae..0655afe7f9 100644
--- a/drivers/usb/fotg210/fotg210-core.c
+++ b/drivers/usb/fotg210/fotg210-core.c
@@ -95,6 +95,7 @@ static int fotg210_gemini_init(struct fotg210 *fotg, struct resource *res,
 
 /**
  * fotg210_vbus() - Called by gadget driver to enable/disable VBUS
+ * @fotg: pointer to a private fotg210 object
  * @enable: true to enable VBUS, false to disable VBUS
  */
 void fotg210_vbus(struct fotg210 *fotg, bool enable)
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index b3592bcb0f..566ff0b128 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -190,6 +190,7 @@ config USB_F_MASS_STORAGE
 	tristate
 
 config USB_F_FS
+	select DMA_SHARED_BUFFER
 	tristate
 
 config USB_F_UAC1
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index 839426d92b..a057cbedf3 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -15,6 +15,9 @@
 /* #define VERBOSE_DEBUG */
 
 #include <linux/blkdev.h>
+#include <linux/dma-buf.h>
+#include <linux/dma-fence.h>
+#include <linux/dma-resv.h>
 #include <linux/pagemap.h>
 #include <linux/export.h>
 #include <linux/fs_parser.h>
@@ -43,6 +46,10 @@
 
 #define FUNCTIONFS_MAGIC	0xa647361 /* Chosen by a honest dice roll ;) */
 
+#define DMABUF_ENQUEUE_TIMEOUT_MS 5000
+
+MODULE_IMPORT_NS(DMA_BUF);
+
 /* Reference counter handling */
 static void ffs_data_get(struct ffs_data *ffs);
 static void ffs_data_put(struct ffs_data *ffs);
@@ -124,6 +131,25 @@ struct ffs_ep {
 	u8				num;
 };
 
+struct ffs_dmabuf_priv {
+	struct list_head entry;
+	struct kref ref;
+	struct ffs_data *ffs;
+	struct dma_buf_attachment *attach;
+	struct sg_table *sgt;
+	enum dma_data_direction dir;
+	spinlock_t lock;
+	u64 context;
+	struct usb_request *req;	/* P: ffs->eps_lock */
+	struct usb_ep *ep;		/* P: ffs->eps_lock */
+};
+
+struct ffs_dma_fence {
+	struct dma_fence base;
+	struct ffs_dmabuf_priv *priv;
+	struct work_struct work;
+};
+
 struct ffs_epfile {
 	/* Protects ep->ep and ep->req. */
 	struct mutex			mutex;
@@ -197,6 +223,11 @@ struct ffs_epfile {
 	unsigned char			isoc;	/* P: ffs->eps_lock */
 
 	unsigned char			_pad;
+
+	/* Protects dmabufs */
+	struct mutex			dmabufs_mutex;
+	struct list_head		dmabufs; /* P: dmabufs_mutex */
+	atomic_t			seqno;
 };
 
 struct ffs_buffer {
@@ -939,31 +970,44 @@ static ssize_t __ffs_epfile_read_data(struct ffs_epfile *epfile,
 	return ret;
 }
 
-static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
+static struct ffs_ep *ffs_epfile_wait_ep(struct file *file)
 {
 	struct ffs_epfile *epfile = file->private_data;
-	struct usb_request *req;
 	struct ffs_ep *ep;
-	char *data = NULL;
-	ssize_t ret, data_len = -EINVAL;
-	int halt;
-
-	/* Are we still active? */
-	if (WARN_ON(epfile->ffs->state != FFS_ACTIVE))
-		return -ENODEV;
+	int ret;
 
 	/* Wait for endpoint to be enabled */
 	ep = epfile->ep;
 	if (!ep) {
 		if (file->f_flags & O_NONBLOCK)
-			return -EAGAIN;
+			return ERR_PTR(-EAGAIN);
 
 		ret = wait_event_interruptible(
 				epfile->ffs->wait, (ep = epfile->ep));
 		if (ret)
-			return -EINTR;
+			return ERR_PTR(-EINTR);
 	}
 
+	return ep;
+}
+
+static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
+{
+	struct ffs_epfile *epfile = file->private_data;
+	struct usb_request *req;
+	struct ffs_ep *ep;
+	char *data = NULL;
+	ssize_t ret, data_len = -EINVAL;
+	int halt;
+
+	/* Are we still active? */
+	if (WARN_ON(epfile->ffs->state != FFS_ACTIVE))
+		return -ENODEV;
+
+	ep = ffs_epfile_wait_ep(file);
+	if (IS_ERR(ep))
+		return PTR_ERR(ep);
+
 	/* Do we halt? */
 	halt = (!io_data->read == !epfile->in);
 	if (halt && epfile->isoc)
@@ -1263,10 +1307,58 @@ static ssize_t ffs_epfile_read_iter(struct kiocb *kiocb, struct iov_iter *to)
 	return res;
 }
 
+static void ffs_dmabuf_release(struct kref *ref)
+{
+	struct ffs_dmabuf_priv *priv = container_of(ref, struct ffs_dmabuf_priv, ref);
+	struct dma_buf_attachment *attach = priv->attach;
+	struct dma_buf *dmabuf = attach->dmabuf;
+
+	pr_vdebug("FFS DMABUF release\n");
+	dma_resv_lock(dmabuf->resv, NULL);
+	dma_buf_unmap_attachment(attach, priv->sgt, priv->dir);
+	dma_resv_unlock(dmabuf->resv);
+
+	dma_buf_detach(attach->dmabuf, attach);
+	dma_buf_put(dmabuf);
+	kfree(priv);
+}
+
+static void ffs_dmabuf_get(struct dma_buf_attachment *attach)
+{
+	struct ffs_dmabuf_priv *priv = attach->importer_priv;
+
+	kref_get(&priv->ref);
+}
+
+static void ffs_dmabuf_put(struct dma_buf_attachment *attach)
+{
+	struct ffs_dmabuf_priv *priv = attach->importer_priv;
+
+	kref_put(&priv->ref, ffs_dmabuf_release);
+}
+
 static int
 ffs_epfile_release(struct inode *inode, struct file *file)
 {
 	struct ffs_epfile *epfile = inode->i_private;
+	struct ffs_dmabuf_priv *priv, *tmp;
+	struct ffs_data *ffs = epfile->ffs;
+
+	mutex_lock(&epfile->dmabufs_mutex);
+
+	/* Close all attached DMABUFs */
+	list_for_each_entry_safe(priv, tmp, &epfile->dmabufs, entry) {
+		/* Cancel any pending transfer */
+		spin_lock_irq(&ffs->eps_lock);
+		if (priv->ep && priv->req)
+			usb_ep_dequeue(priv->ep, priv->req);
+		spin_unlock_irq(&ffs->eps_lock);
+
+		list_del(&priv->entry);
+		ffs_dmabuf_put(priv->attach);
+	}
+
+	mutex_unlock(&epfile->dmabufs_mutex);
 
 	__ffs_epfile_read_buffer_free(epfile);
 	ffs_data_closed(epfile->ffs);
@@ -1274,6 +1366,357 @@ ffs_epfile_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
+static void ffs_dmabuf_cleanup(struct work_struct *work)
+{
+	struct ffs_dma_fence *dma_fence =
+		container_of(work, struct ffs_dma_fence, work);
+	struct ffs_dmabuf_priv *priv = dma_fence->priv;
+	struct dma_buf_attachment *attach = priv->attach;
+	struct dma_fence *fence = &dma_fence->base;
+
+	ffs_dmabuf_put(attach);
+	dma_fence_put(fence);
+}
+
+static void ffs_dmabuf_signal_done(struct ffs_dma_fence *dma_fence, int ret)
+{
+	struct ffs_dmabuf_priv *priv = dma_fence->priv;
+	struct dma_fence *fence = &dma_fence->base;
+	bool cookie = dma_fence_begin_signalling();
+
+	dma_fence_get(fence);
+	fence->error = ret;
+	dma_fence_signal(fence);
+	dma_fence_end_signalling(cookie);
+
+	/*
+	 * The fence will be unref'd in ffs_dmabuf_cleanup.
+	 * It can't be done here, as the unref functions might try to lock
+	 * the resv object, which would deadlock.
+	 */
+	INIT_WORK(&dma_fence->work, ffs_dmabuf_cleanup);
+	queue_work(priv->ffs->io_completion_wq, &dma_fence->work);
+}
+
+static void ffs_epfile_dmabuf_io_complete(struct usb_ep *ep,
+					  struct usb_request *req)
+{
+	pr_vdebug("FFS: DMABUF transfer complete, status=%d\n", req->status);
+	ffs_dmabuf_signal_done(req->context, req->status);
+	usb_ep_free_request(ep, req);
+}
+
+static const char *ffs_dmabuf_get_driver_name(struct dma_fence *fence)
+{
+	return "functionfs";
+}
+
+static const char *ffs_dmabuf_get_timeline_name(struct dma_fence *fence)
+{
+	return "";
+}
+
+static void ffs_dmabuf_fence_release(struct dma_fence *fence)
+{
+	struct ffs_dma_fence *dma_fence =
+		container_of(fence, struct ffs_dma_fence, base);
+
+	kfree(dma_fence);
+}
+
+static const struct dma_fence_ops ffs_dmabuf_fence_ops = {
+	.get_driver_name	= ffs_dmabuf_get_driver_name,
+	.get_timeline_name	= ffs_dmabuf_get_timeline_name,
+	.release		= ffs_dmabuf_fence_release,
+};
+
+static int ffs_dma_resv_lock(struct dma_buf *dmabuf, bool nonblock)
+{
+	if (!nonblock)
+		return dma_resv_lock_interruptible(dmabuf->resv, NULL);
+
+	if (!dma_resv_trylock(dmabuf->resv))
+		return -EBUSY;
+
+	return 0;
+}
+
+static struct dma_buf_attachment *
+ffs_dmabuf_find_attachment(struct ffs_epfile *epfile, struct dma_buf *dmabuf)
+{
+	struct device *dev = epfile->ffs->gadget->dev.parent;
+	struct dma_buf_attachment *attach = NULL;
+	struct ffs_dmabuf_priv *priv;
+
+	mutex_lock(&epfile->dmabufs_mutex);
+
+	list_for_each_entry(priv, &epfile->dmabufs, entry) {
+		if (priv->attach->dev == dev
+		    && priv->attach->dmabuf == dmabuf) {
+			attach = priv->attach;
+			break;
+		}
+	}
+
+	if (attach)
+		ffs_dmabuf_get(attach);
+
+	mutex_unlock(&epfile->dmabufs_mutex);
+
+	return attach ?: ERR_PTR(-EPERM);
+}
+
+static int ffs_dmabuf_attach(struct file *file, int fd)
+{
+	bool nonblock = file->f_flags & O_NONBLOCK;
+	struct ffs_epfile *epfile = file->private_data;
+	struct usb_gadget *gadget = epfile->ffs->gadget;
+	struct dma_buf_attachment *attach;
+	struct ffs_dmabuf_priv *priv;
+	enum dma_data_direction dir;
+	struct sg_table *sg_table;
+	struct dma_buf *dmabuf;
+	int err;
+
+	if (!gadget || !gadget->sg_supported)
+		return -EPERM;
+
+	dmabuf = dma_buf_get(fd);
+	if (IS_ERR(dmabuf))
+		return PTR_ERR(dmabuf);
+
+	attach = dma_buf_attach(dmabuf, gadget->dev.parent);
+	if (IS_ERR(attach)) {
+		err = PTR_ERR(attach);
+		goto err_dmabuf_put;
+	}
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		err = -ENOMEM;
+		goto err_dmabuf_detach;
+	}
+
+	dir = epfile->in ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+	err = ffs_dma_resv_lock(dmabuf, nonblock);
+	if (err)
+		goto err_free_priv;
+
+	sg_table = dma_buf_map_attachment(attach, dir);
+	dma_resv_unlock(dmabuf->resv);
+
+	if (IS_ERR(sg_table)) {
+		err = PTR_ERR(sg_table);
+		goto err_free_priv;
+	}
+
+	attach->importer_priv = priv;
+
+	priv->sgt = sg_table;
+	priv->dir = dir;
+	priv->ffs = epfile->ffs;
+	priv->attach = attach;
+	spin_lock_init(&priv->lock);
+	kref_init(&priv->ref);
+	priv->context = dma_fence_context_alloc(1);
+
+	mutex_lock(&epfile->dmabufs_mutex);
+	list_add(&priv->entry, &epfile->dmabufs);
+	mutex_unlock(&epfile->dmabufs_mutex);
+
+	return 0;
+
+err_free_priv:
+	kfree(priv);
+err_dmabuf_detach:
+	dma_buf_detach(dmabuf, attach);
+err_dmabuf_put:
+	dma_buf_put(dmabuf);
+
+	return err;
+}
+
+static int ffs_dmabuf_detach(struct file *file, int fd)
+{
+	struct ffs_epfile *epfile = file->private_data;
+	struct ffs_data *ffs = epfile->ffs;
+	struct device *dev = ffs->gadget->dev.parent;
+	struct ffs_dmabuf_priv *priv, *tmp;
+	struct dma_buf *dmabuf;
+	int ret = -EPERM;
+
+	dmabuf = dma_buf_get(fd);
+	if (IS_ERR(dmabuf))
+		return PTR_ERR(dmabuf);
+
+	mutex_lock(&epfile->dmabufs_mutex);
+
+	list_for_each_entry_safe(priv, tmp, &epfile->dmabufs, entry) {
+		if (priv->attach->dev == dev
+		    && priv->attach->dmabuf == dmabuf) {
+			/* Cancel any pending transfer */
+			spin_lock_irq(&ffs->eps_lock);
+			if (priv->ep && priv->req)
+				usb_ep_dequeue(priv->ep, priv->req);
+			spin_unlock_irq(&ffs->eps_lock);
+
+			list_del(&priv->entry);
+
+			/* Unref the reference from ffs_dmabuf_attach() */
+			ffs_dmabuf_put(priv->attach);
+			ret = 0;
+			break;
+		}
+	}
+
+	mutex_unlock(&epfile->dmabufs_mutex);
+	dma_buf_put(dmabuf);
+
+	return ret;
+}
+
+static int ffs_dmabuf_transfer(struct file *file,
+			       const struct usb_ffs_dmabuf_transfer_req *req)
+{
+	bool nonblock = file->f_flags & O_NONBLOCK;
+	struct ffs_epfile *epfile = file->private_data;
+	struct dma_buf_attachment *attach;
+	struct ffs_dmabuf_priv *priv;
+	struct ffs_dma_fence *fence;
+	struct usb_request *usb_req;
+	enum dma_resv_usage resv_dir;
+	struct dma_buf *dmabuf;
+	unsigned long timeout;
+	struct ffs_ep *ep;
+	bool cookie;
+	u32 seqno;
+	long retl;
+	int ret;
+
+	if (req->flags & ~USB_FFS_DMABUF_TRANSFER_MASK)
+		return -EINVAL;
+
+	dmabuf = dma_buf_get(req->fd);
+	if (IS_ERR(dmabuf))
+		return PTR_ERR(dmabuf);
+
+	if (req->length > dmabuf->size || req->length == 0) {
+		ret = -EINVAL;
+		goto err_dmabuf_put;
+	}
+
+	attach = ffs_dmabuf_find_attachment(epfile, dmabuf);
+	if (IS_ERR(attach)) {
+		ret = PTR_ERR(attach);
+		goto err_dmabuf_put;
+	}
+
+	priv = attach->importer_priv;
+
+	ep = ffs_epfile_wait_ep(file);
+	if (IS_ERR(ep)) {
+		ret = PTR_ERR(ep);
+		goto err_attachment_put;
+	}
+
+	ret = ffs_dma_resv_lock(dmabuf, nonblock);
+	if (ret)
+		goto err_attachment_put;
+
+	/* Make sure we don't have writers */
+	timeout = nonblock ? 0 : msecs_to_jiffies(DMABUF_ENQUEUE_TIMEOUT_MS);
+	retl = dma_resv_wait_timeout(dmabuf->resv,
+				     dma_resv_usage_rw(epfile->in),
+				     true, timeout);
+	if (retl == 0)
+		retl = -EBUSY;
+	if (retl < 0) {
+		ret = (int)retl;
+		goto err_resv_unlock;
+	}
+
+	ret = dma_resv_reserve_fences(dmabuf->resv, 1);
+	if (ret)
+		goto err_resv_unlock;
+
+	fence = kmalloc(sizeof(*fence), GFP_KERNEL);
+	if (!fence) {
+		ret = -ENOMEM;
+		goto err_resv_unlock;
+	}
+
+	fence->priv = priv;
+
+	spin_lock_irq(&epfile->ffs->eps_lock);
+
+	/* In the meantime, endpoint got disabled or changed. */
+	if (epfile->ep != ep) {
+		ret = -ESHUTDOWN;
+		goto err_fence_put;
+	}
+
+	usb_req = usb_ep_alloc_request(ep->ep, GFP_ATOMIC);
+	if (!usb_req) {
+		ret = -ENOMEM;
+		goto err_fence_put;
+	}
+
+	/*
+	 * usb_ep_queue() guarantees that all transfers are processed in the
+	 * order they are enqueued, so we can use a simple incrementing
+	 * sequence number for the dma_fence.
+	 */
+	seqno = atomic_add_return(1, &epfile->seqno);
+
+	dma_fence_init(&fence->base, &ffs_dmabuf_fence_ops,
+		       &priv->lock, priv->context, seqno);
+
+	resv_dir = epfile->in ? DMA_RESV_USAGE_WRITE : DMA_RESV_USAGE_READ;
+
+	dma_resv_add_fence(dmabuf->resv, &fence->base, resv_dir);
+	dma_resv_unlock(dmabuf->resv);
+
+	/* Now that the dma_fence is in place, queue the transfer. */
+
+	usb_req->length = req->length;
+	usb_req->buf = NULL;
+	usb_req->sg = priv->sgt->sgl;
+	usb_req->num_sgs = sg_nents_for_len(priv->sgt->sgl, req->length);
+	usb_req->sg_was_mapped = true;
+	usb_req->context  = fence;
+	usb_req->complete = ffs_epfile_dmabuf_io_complete;
+
+	cookie = dma_fence_begin_signalling();
+	ret = usb_ep_queue(ep->ep, usb_req, GFP_ATOMIC);
+	dma_fence_end_signalling(cookie);
+	if (!ret) {
+		priv->req = usb_req;
+		priv->ep = ep->ep;
+	} else {
+		pr_warn("FFS: Failed to queue DMABUF: %d\n", ret);
+		ffs_dmabuf_signal_done(fence, ret);
+		usb_ep_free_request(ep->ep, usb_req);
+	}
+
+	spin_unlock_irq(&epfile->ffs->eps_lock);
+	dma_buf_put(dmabuf);
+
+	return ret;
+
+err_fence_put:
+	spin_unlock_irq(&epfile->ffs->eps_lock);
+	dma_fence_put(&fence->base);
+err_resv_unlock:
+	dma_resv_unlock(dmabuf->resv);
+err_attachment_put:
+	ffs_dmabuf_put(attach);
+err_dmabuf_put:
+	dma_buf_put(dmabuf);
+
+	return ret;
+}
+
 static long ffs_epfile_ioctl(struct file *file, unsigned code,
 			     unsigned long value)
 {
@@ -1284,17 +1727,48 @@ static long ffs_epfile_ioctl(struct file *file, unsigned code,
 	if (WARN_ON(epfile->ffs->state != FFS_ACTIVE))
 		return -ENODEV;
 
-	/* Wait for endpoint to be enabled */
-	ep = epfile->ep;
-	if (!ep) {
-		if (file->f_flags & O_NONBLOCK)
-			return -EAGAIN;
+	switch (code) {
+	case FUNCTIONFS_DMABUF_ATTACH:
+	{
+		int fd;
 
-		ret = wait_event_interruptible(
-				epfile->ffs->wait, (ep = epfile->ep));
-		if (ret)
-			return -EINTR;
+		if (copy_from_user(&fd, (void __user *)value, sizeof(fd))) {
+			ret = -EFAULT;
+			break;
+		}
+
+		return ffs_dmabuf_attach(file, fd);
 	}
+	case FUNCTIONFS_DMABUF_DETACH:
+	{
+		int fd;
+
+		if (copy_from_user(&fd, (void __user *)value, sizeof(fd))) {
+			ret = -EFAULT;
+			break;
+		}
+
+		return ffs_dmabuf_detach(file, fd);
+	}
+	case FUNCTIONFS_DMABUF_TRANSFER:
+	{
+		struct usb_ffs_dmabuf_transfer_req req;
+
+		if (copy_from_user(&req, (void __user *)value, sizeof(req))) {
+			ret = -EFAULT;
+			break;
+		}
+
+		return ffs_dmabuf_transfer(file, &req);
+	}
+	default:
+		break;
+	}
+
+	/* Wait for endpoint to be enabled */
+	ep = ffs_epfile_wait_ep(file);
+	if (IS_ERR(ep))
+		return PTR_ERR(ep);
 
 	spin_lock_irq(&epfile->ffs->eps_lock);
 
@@ -1868,6 +2342,8 @@ static int ffs_epfiles_create(struct ffs_data *ffs)
 	for (i = 1; i <= count; ++i, ++epfile) {
 		epfile->ffs = ffs;
 		mutex_init(&epfile->mutex);
+		mutex_init(&epfile->dmabufs_mutex);
+		INIT_LIST_HEAD(&epfile->dmabufs);
 		if (ffs->user_flags & FUNCTIONFS_VIRTUAL_ADDR)
 			sprintf(epfile->name, "ep%02x", ffs->eps_addrmap[i]);
 		else
@@ -3450,6 +3926,25 @@ static inline struct f_fs_opts *to_ffs_opts(struct config_item *item)
 			    func_inst.group);
 }
 
+static ssize_t f_fs_opts_ready_show(struct config_item *item, char *page)
+{
+	struct f_fs_opts *opts = to_ffs_opts(item);
+	int ready;
+
+	ffs_dev_lock();
+	ready = opts->dev->desc_ready;
+	ffs_dev_unlock();
+
+	return sprintf(page, "%d\n", ready);
+}
+
+CONFIGFS_ATTR_RO(f_fs_opts_, ready);
+
+static struct configfs_attribute *ffs_attrs[] = {
+	&f_fs_opts_attr_ready,
+	NULL,
+};
+
 static void ffs_attr_release(struct config_item *item)
 {
 	struct f_fs_opts *opts = to_ffs_opts(item);
@@ -3463,6 +3958,7 @@ static struct configfs_item_operations ffs_item_ops = {
 
 static const struct config_item_type ffs_func_type = {
 	.ct_item_ops	= &ffs_item_ops,
+	.ct_attrs	= ffs_attrs,
 	.ct_owner	= THIS_MODULE,
 };
 
diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index 3c8a9dd585..2db01e03bf 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -1029,9 +1029,9 @@ static inline int hidg_get_minor(void)
 {
 	int ret;
 
-	ret = ida_simple_get(&hidg_ida, 0, 0, GFP_KERNEL);
+	ret = ida_alloc(&hidg_ida, GFP_KERNEL);
 	if (ret >= HIDG_MINORS) {
-		ida_simple_remove(&hidg_ida, ret);
+		ida_free(&hidg_ida, ret);
 		ret = -ENODEV;
 	}
 
@@ -1176,7 +1176,7 @@ static const struct config_item_type hid_func_type = {
 
 static inline void hidg_put_minor(int minor)
 {
-	ida_simple_remove(&hidg_ida, minor);
+	ida_free(&hidg_ida, minor);
 }
 
 static void hidg_free_inst(struct usb_function_instance *f)
diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index 076dd4c1be..ba7d180cc9 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -1312,9 +1312,9 @@ static inline int gprinter_get_minor(void)
 {
 	int ret;
 
-	ret = ida_simple_get(&printer_ida, 0, 0, GFP_KERNEL);
+	ret = ida_alloc(&printer_ida, GFP_KERNEL);
 	if (ret >= PRINTER_MINORS) {
-		ida_simple_remove(&printer_ida, ret);
+		ida_free(&printer_ida, ret);
 		ret = -ENODEV;
 	}
 
@@ -1323,7 +1323,7 @@ static inline int gprinter_get_minor(void)
 
 static inline void gprinter_put_minor(int minor)
 {
-	ida_simple_remove(&printer_ida, minor);
+	ida_free(&printer_ida, minor);
 }
 
 static int gprinter_setup(int);
diff --git a/drivers/usb/gadget/function/rndis.c b/drivers/usb/gadget/function/rndis.c
index 29bf8664bf..12c5d9cf45 100644
--- a/drivers/usb/gadget/function/rndis.c
+++ b/drivers/usb/gadget/function/rndis.c
@@ -869,12 +869,12 @@ EXPORT_SYMBOL_GPL(rndis_msg_parser);
 
 static inline int rndis_get_nr(void)
 {
-	return ida_simple_get(&rndis_ida, 0, 1000, GFP_KERNEL);
+	return ida_alloc_max(&rndis_ida, 999, GFP_KERNEL);
 }
 
 static inline void rndis_put_nr(int nr)
 {
-	ida_simple_remove(&rndis_ida, nr);
+	ida_free(&rndis_ida, nr);
 }
 
 struct rndis_params *rndis_register(void (*resp_avail)(void *v), void *v)
diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c
index 4a42574b4a..ec1dceb087 100644
--- a/drivers/usb/gadget/function/u_audio.c
+++ b/drivers/usb/gadget/function/u_audio.c
@@ -57,13 +57,13 @@ struct uac_rtd_params {
 
   /* Volume/Mute controls and their state */
   int fu_id; /* Feature Unit ID */
-  struct snd_kcontrol *snd_kctl_volume;
-  struct snd_kcontrol *snd_kctl_mute;
+  struct snd_ctl_elem_id snd_kctl_volume_id;
+  struct snd_ctl_elem_id snd_kctl_mute_id;
   s16 volume_min, volume_max, volume_res;
   s16 volume;
   int mute;
 
-	struct snd_kcontrol *snd_kctl_rate; /* read-only current rate */
+	struct snd_ctl_elem_id snd_kctl_rate_id; /* read-only current rate */
 	int srate; /* selected samplerate */
 	int active; /* playback/capture running */
 
@@ -494,14 +494,13 @@ static inline void free_ep_fback(struct uac_rtd_params *prm, struct usb_ep *ep)
 static void set_active(struct uac_rtd_params *prm, bool active)
 {
 	// notifying through the Rate ctrl
-	struct snd_kcontrol *kctl = prm->snd_kctl_rate;
 	unsigned long flags;
 
 	spin_lock_irqsave(&prm->lock, flags);
 	if (prm->active != active) {
 		prm->active = active;
 		snd_ctl_notify(prm->uac->card, SNDRV_CTL_EVENT_MASK_VALUE,
-				&kctl->id);
+				&prm->snd_kctl_rate_id);
 	}
 	spin_unlock_irqrestore(&prm->lock, flags);
 }
@@ -807,7 +806,7 @@ int u_audio_set_volume(struct g_audio *audio_dev, int playback, s16 val)
 
 	if (change)
 		snd_ctl_notify(uac->card, SNDRV_CTL_EVENT_MASK_VALUE,
-				&prm->snd_kctl_volume->id);
+				&prm->snd_kctl_volume_id);
 
 	return 0;
 }
@@ -856,7 +855,7 @@ int u_audio_set_mute(struct g_audio *audio_dev, int playback, int val)
 
 	if (change)
 		snd_ctl_notify(uac->card, SNDRV_CTL_EVENT_MASK_VALUE,
-			       &prm->snd_kctl_mute->id);
+			       &prm->snd_kctl_mute_id);
 
 	return 0;
 }
@@ -1331,7 +1330,7 @@ int g_audio_setup(struct g_audio *g_audio, const char *pcm_name,
 			err = snd_ctl_add(card, kctl);
 			if (err < 0)
 				goto snd_fail;
-			prm->snd_kctl_mute = kctl;
+			prm->snd_kctl_mute_id = kctl->id;
 			prm->mute = 0;
 		}
 
@@ -1359,7 +1358,7 @@ int g_audio_setup(struct g_audio *g_audio, const char *pcm_name,
 			err = snd_ctl_add(card, kctl);
 			if (err < 0)
 				goto snd_fail;
-			prm->snd_kctl_volume = kctl;
+			prm->snd_kctl_volume_id = kctl->id;
 			prm->volume = fu->volume_max;
 			prm->volume_max = fu->volume_max;
 			prm->volume_min = fu->volume_min;
@@ -1383,7 +1382,7 @@ int g_audio_setup(struct g_audio *g_audio, const char *pcm_name,
 		err = snd_ctl_add(card, kctl);
 		if (err < 0)
 			goto snd_fail;
-		prm->snd_kctl_rate = kctl;
+		prm->snd_kctl_rate_id = kctl->id;
 	}
 
 	strscpy(card->driver, card_name, sizeof(card->driver));
@@ -1420,6 +1419,8 @@ void g_audio_cleanup(struct g_audio *g_audio)
 		return;
 
 	uac = g_audio->uac;
+	g_audio->uac = NULL;
+
 	card = uac->card;
 	if (card)
 		snd_card_free_when_closed(card);
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index 3c5a6f6ac3..444212c0b5 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -718,7 +718,7 @@ static const struct net_device_ops eth_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 };
 
-static struct device_type gadget_type = {
+static const struct device_type gadget_type = {
 	.name	= "gadget",
 };
 
diff --git a/drivers/usb/gadget/function/uvc_configfs.c b/drivers/usb/gadget/function/uvc_configfs.c
index a4377df612..6fac696ea8 100644
--- a/drivers/usb/gadget/function/uvc_configfs.c
+++ b/drivers/usb/gadget/function/uvc_configfs.c
@@ -13,6 +13,7 @@
 #include "uvc_configfs.h"
 
 #include <linux/sort.h>
+#include <linux/usb/uvc.h>
 #include <linux/usb/video.h>
 
 /* -----------------------------------------------------------------------------
@@ -2260,6 +2261,8 @@ static ssize_t uvcg_uncompressed_guid_format_store(struct config_item *item,
 	struct f_uvc_opts *opts;
 	struct config_item *opts_item;
 	struct mutex *su_mutex = &ch->fmt.group.cg_subsys->su_mutex;
+	const struct uvc_format_desc *format;
+	u8 tmpguidFormat[sizeof(ch->desc.guidFormat)];
 	int ret;
 
 	mutex_lock(su_mutex); /* for navigating configfs hierarchy */
@@ -2273,7 +2276,16 @@ static ssize_t uvcg_uncompressed_guid_format_store(struct config_item *item,
 		goto end;
 	}
 
-	memcpy(ch->desc.guidFormat, page,
+	memcpy(tmpguidFormat, page,
+	       min(sizeof(tmpguidFormat), len));
+
+	format = uvc_format_by_guid(tmpguidFormat);
+	if (!format) {
+		ret = -EINVAL;
+		goto end;
+	}
+
+	memcpy(ch->desc.guidFormat, tmpguidFormat,
 	       min(sizeof(ch->desc.guidFormat), len));
 	ret = sizeof(ch->desc.guidFormat);
 
diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c
index 53e4cd81ea..d41f5f31da 100644
--- a/drivers/usb/gadget/function/uvc_video.c
+++ b/drivers/usb/gadget/function/uvc_video.c
@@ -373,6 +373,7 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req)
 	struct uvc_video *video = ureq->video;
 	struct uvc_video_queue *queue = &video->queue;
 	struct uvc_buffer *last_buf;
+	struct usb_request *to_queue = req;
 	unsigned long flags;
 	bool is_bulk = video->max_payload_size;
 	int ret = 0;
@@ -400,7 +401,8 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req)
 
 	case -EXDEV:
 		uvcg_dbg(&video->uvc->func, "VS request missed xfer.\n");
-		queue->flags |= UVC_QUEUE_DROP_INCOMPLETE;
+		if (req->length != 0)
+			queue->flags |= UVC_QUEUE_DROP_INCOMPLETE;
 		break;
 
 	case -ESHUTDOWN:	/* disconnect from host. */
@@ -428,59 +430,59 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req)
 	 * we're still streaming before queueing the usb_request
 	 * back to req_free
 	 */
-	if (video->is_enabled) {
+	if (!video->is_enabled) {
+		uvc_video_free_request(ureq, ep);
+		spin_unlock_irqrestore(&video->req_lock, flags);
+		uvcg_queue_cancel(queue, 0);
+
+		return;
+	}
+
+	/*
+	 * Here we check whether any request is available in the ready
+	 * list. If it is, queue it to the ep and add the current
+	 * usb_request to the req_free list - for video_pump to fill in.
+	 * Otherwise, just use the current usb_request to queue a 0
+	 * length request to the ep. Since we always add to the req_free
+	 * list if we dequeue from the ready list, there will never
+	 * be a situation where the req_free list is completely out of
+	 * requests and cannot recover.
+	 */
+	to_queue->length = 0;
+	if (!list_empty(&video->req_ready)) {
+		to_queue = list_first_entry(&video->req_ready,
+			struct usb_request, list);
+		list_del(&to_queue->list);
+		list_add_tail(&req->list, &video->req_free);
 		/*
-		 * Here we check whether any request is available in the ready
-		 * list. If it is, queue it to the ep and add the current
-		 * usb_request to the req_free list - for video_pump to fill in.
-		 * Otherwise, just use the current usb_request to queue a 0
-		 * length request to the ep. Since we always add to the req_free
-		 * list if we dequeue from the ready list, there will never
-		 * be a situation where the req_free list is completely out of
-		 * requests and cannot recover.
+		 * Queue work to the wq as well since it is possible that a
+		 * buffer may not have been completely encoded with the set of
+		 * in-flight usb requests for whih the complete callbacks are
+		 * firing.
+		 * In that case, if we do not queue work to the worker thread,
+		 * the buffer will never be marked as complete - and therefore
+		 * not be returned to userpsace. As a result,
+		 * dequeue -> queue -> dequeue flow of uvc buffers will not
+		 * happen.
 		 */
-		struct usb_request *to_queue = req;
-
-		to_queue->length = 0;
-		if (!list_empty(&video->req_ready)) {
-			to_queue = list_first_entry(&video->req_ready,
-				struct usb_request, list);
-			list_del(&to_queue->list);
-			list_add_tail(&req->list, &video->req_free);
-			/*
-			 * Queue work to the wq as well since it is possible that a
-			 * buffer may not have been completely encoded with the set of
-			 * in-flight usb requests for whih the complete callbacks are
-			 * firing.
-			 * In that case, if we do not queue work to the worker thread,
-			 * the buffer will never be marked as complete - and therefore
-			 * not be returned to userpsace. As a result,
-			 * dequeue -> queue -> dequeue flow of uvc buffers will not
-			 * happen.
-			 */
-			queue_work(video->async_wq, &video->pump);
-		}
+		queue_work(video->async_wq, &video->pump);
+	}
+	/*
+	 * Queue to the endpoint. The actual queueing to ep will
+	 * only happen on one thread - the async_wq for bulk endpoints
+	 * and this thread for isoc endpoints.
+	 */
+	ret = uvcg_video_usb_req_queue(video, to_queue, !is_bulk);
+	if (ret < 0) {
 		/*
-		 * Queue to the endpoint. The actual queueing to ep will
-		 * only happen on one thread - the async_wq for bulk endpoints
-		 * and this thread for isoc endpoints.
+		 * Endpoint error, but the stream is still enabled.
+		 * Put request back in req_free for it to be cleaned
+		 * up later.
 		 */
-		ret = uvcg_video_usb_req_queue(video, to_queue, !is_bulk);
-		if (ret < 0) {
-			/*
-			 * Endpoint error, but the stream is still enabled.
-			 * Put request back in req_free for it to be cleaned
-			 * up later.
-			 */
-			list_add_tail(&to_queue->list, &video->req_free);
-		}
-	} else {
-		uvc_video_free_request(ureq, ep);
-		ret = 0;
+		list_add_tail(&to_queue->list, &video->req_free);
 	}
+
 	spin_unlock_irqrestore(&video->req_lock, flags);
-	if (ret < 0)
-		uvcg_queue_cancel(queue, 0);
 }
 
 static int
@@ -625,14 +627,7 @@ static void uvcg_video_pump(struct work_struct *work)
 			uvcg_queue_cancel(queue, 0);
 			break;
 		}
-
-		/* The request is owned by  the endpoint / ready list. */
-		req = NULL;
 	}
-
-	if (!req)
-		return;
-
 	spin_lock_irqsave(&video->req_lock, flags);
 	if (video->is_enabled)
 		list_add_tail(&req->list, &video->req_free);
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 8ac29f7230..b3a9d18a8d 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -905,6 +905,11 @@ int usb_gadget_map_request_by_dev(struct device *dev,
 	if (req->length == 0)
 		return 0;
 
+	if (req->sg_was_mapped) {
+		req->num_mapped_sgs = req->num_sgs;
+		return 0;
+	}
+
 	if (req->num_sgs) {
 		int     mapped;
 
@@ -950,7 +955,7 @@ EXPORT_SYMBOL_GPL(usb_gadget_map_request);
 void usb_gadget_unmap_request_by_dev(struct device *dev,
 		struct usb_request *req, int is_in)
 {
-	if (req->length == 0)
+	if (req->length == 0 || req->sg_was_mapped)
 		return;
 
 	if (req->num_mapped_sgs) {
diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c
index e8042c158f..3432ebfae9 100644
--- a/drivers/usb/gadget/udc/fsl_udc_core.c
+++ b/drivers/usb/gadget/udc/fsl_udc_core.c
@@ -13,7 +13,7 @@
  * code from Dave Liu and Shlomi Gridish.
  */
 
-#undef VERBOSE
+#define pr_fmt(x) "udc: " x
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -183,9 +183,9 @@ __acquires(ep->udc->lock)
 	usb_gadget_unmap_request(&ep->udc->gadget, &req->req, ep_is_in(ep));
 
 	if (status && (status != -ESHUTDOWN))
-		VDBG("complete %s req %p stat %d len %u/%u",
-			ep->ep.name, &req->req, status,
-			req->req.actual, req->req.length);
+		dev_vdbg(&udc->gadget.dev, "complete %s req %p stat %d len %u/%u\n",
+			 ep->ep.name, &req->req, status,
+			 req->req.actual, req->req.length);
 
 	ep->stopped = 1;
 
@@ -285,7 +285,7 @@ static int dr_controller_setup(struct fsl_udc *udc)
 	timeout = jiffies + FSL_UDC_RESET_TIMEOUT;
 	while (fsl_readl(&dr_regs->usbcmd) & USB_CMD_CTRL_RESET) {
 		if (time_after(jiffies, timeout)) {
-			ERR("udc reset timeout!\n");
+			dev_err(&udc->gadget.dev, "udc reset timeout!\n");
 			return -ETIMEDOUT;
 		}
 		cpu_relax();
@@ -308,9 +308,10 @@ static int dr_controller_setup(struct fsl_udc *udc)
 	tmp &= USB_EP_LIST_ADDRESS_MASK;
 	fsl_writel(tmp, &dr_regs->endpointlistaddr);
 
-	VDBG("vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x",
-		udc->ep_qh, (int)tmp,
-		fsl_readl(&dr_regs->endpointlistaddr));
+	dev_vdbg(&udc->gadget.dev,
+		 "vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x\n",
+		 udc->ep_qh, (int)tmp,
+		 fsl_readl(&dr_regs->endpointlistaddr));
 
 	max_no_of_ep = (0x0000001F & fsl_readl(&dr_regs->dccparams));
 	for (ep_num = 1; ep_num < max_no_of_ep; ep_num++) {
@@ -498,7 +499,7 @@ static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num,
 		tmp = max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS;
 		break;
 	default:
-		VDBG("error ep type is %d", ep_type);
+		dev_vdbg(&udc->gadget.dev, "error ep type is %d\n", ep_type);
 		return;
 	}
 	if (zlt)
@@ -611,10 +612,10 @@ static int fsl_ep_enable(struct usb_ep *_ep,
 	spin_unlock_irqrestore(&udc->lock, flags);
 	retval = 0;
 
-	VDBG("enabled %s (ep%d%s) maxpacket %d",ep->ep.name,
-			ep->ep.desc->bEndpointAddress & 0x0f,
-			(desc->bEndpointAddress & USB_DIR_IN)
-				? "in" : "out", max);
+	dev_vdbg(&udc->gadget.dev, "enabled %s (ep%d%s) maxpacket %d\n",
+		 ep->ep.name, ep->ep.desc->bEndpointAddress & 0x0f,
+		 (desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
+		 max);
 en_done:
 	return retval;
 }
@@ -633,7 +634,10 @@ static int fsl_ep_disable(struct usb_ep *_ep)
 
 	ep = container_of(_ep, struct fsl_ep, ep);
 	if (!_ep || !ep->ep.desc) {
-		VDBG("%s not enabled", _ep ? ep->ep.name : NULL);
+		/*
+		 * dev_vdbg(&udc->gadget.dev, "%s not enabled\n",
+		 *	 _ep ? ep->ep.name : NULL);
+		 */
 		return -EINVAL;
 	}
 
@@ -659,7 +663,7 @@ static int fsl_ep_disable(struct usb_ep *_ep)
 	ep->stopped = 1;
 	spin_unlock_irqrestore(&udc->lock, flags);
 
-	VDBG("disabled %s OK", _ep->name);
+	dev_vdbg(&udc->gadget.dev, "disabled %s OK\n", _ep->name);
 	return 0;
 }
 
@@ -719,8 +723,8 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
 {
 	u32 temp, bitmask, tmp_stat;
 
-	/* VDBG("QH addr Register 0x%8x", dr_regs->endpointlistaddr);
-	VDBG("ep_qh[%d] addr is 0x%8x", i, (u32)&(ep->udc->ep_qh[i])); */
+	/* dev_vdbg(&udc->gadget.dev, "QH addr Register 0x%8x\n", dr_regs->endpointlistaddr);
+	dev_vdbg(&udc->gadget.dev, "ep_qh[%d] addr is 0x%8x\n", i, (u32)&(ep->udc->ep_qh[i])); */
 
 	bitmask = ep_is_in(ep)
 		? (1 << (ep_index(ep) + 16))
@@ -808,7 +812,7 @@ static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
 		*is_last = 0;
 
 	if ((*is_last) == 0)
-		VDBG("multi-dtd request!");
+		dev_vdbg(&udc_controller->gadget.dev, "multi-dtd request!\n");
 	/* Fill in the transfer size; set active bit */
 	swap_temp = ((*length << DTD_LENGTH_BIT_POS) | DTD_STATUS_ACTIVE);
 
@@ -820,7 +824,7 @@ static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
 
 	mb();
 
-	VDBG("length = %d address= 0x%x", *length, (int)*dma);
+	dev_vdbg(&udc_controller->gadget.dev, "length = %d address= 0x%x\n", *length, (int)*dma);
 
 	return dtd;
 }
@@ -864,18 +868,18 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 {
 	struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep);
 	struct fsl_req *req = container_of(_req, struct fsl_req, req);
-	struct fsl_udc *udc;
+	struct fsl_udc *udc = ep->udc;
 	unsigned long flags;
 	int ret;
 
 	/* catch various bogus parameters */
 	if (!_req || !req->req.complete || !req->req.buf
 			|| !list_empty(&req->queue)) {
-		VDBG("%s, bad params", __func__);
+		dev_vdbg(&udc->gadget.dev, "%s, bad params\n", __func__);
 		return -EINVAL;
 	}
-	if (unlikely(!_ep || !ep->ep.desc)) {
-		VDBG("%s, bad ep", __func__);
+	if (unlikely(!ep->ep.desc)) {
+		dev_vdbg(&udc->gadget.dev, "%s, bad ep\n", __func__);
 		return -EINVAL;
 	}
 	if (usb_endpoint_xfer_isoc(ep->ep.desc)) {
@@ -883,7 +887,6 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 			return -EMSGSIZE;
 	}
 
-	udc = ep->udc;
 	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
 		return -ESHUTDOWN;
 
@@ -1036,8 +1039,8 @@ static int fsl_ep_set_halt(struct usb_ep *_ep, int value)
 		udc->ep0_dir = 0;
 	}
 out:
-	VDBG(" %s %s halt stat %d", ep->ep.name,
-			value ?  "set" : "clear", status);
+	dev_vdbg(&udc->gadget.dev, "%s %s halt stat %d\n", ep->ep.name,
+		 value ?  "set" : "clear", status);
 
 	return status;
 }
@@ -1105,7 +1108,8 @@ static void fsl_ep_fifo_flush(struct usb_ep *_ep)
 		/* Wait until flush complete */
 		while (fsl_readl(&dr_regs->endptflush)) {
 			if (time_after(jiffies, timeout)) {
-				ERR("ep flush timeout\n");
+				dev_err(&udc_controller->gadget.dev,
+					"ep flush timeout\n");
 				return;
 			}
 			cpu_relax();
@@ -1177,7 +1181,7 @@ static int fsl_vbus_session(struct usb_gadget *gadget, int is_active)
 
 	udc = container_of(gadget, struct fsl_udc, gadget);
 	spin_lock_irqsave(&udc->lock, flags);
-	VDBG("VBUS %s", is_active ? "on" : "off");
+	dev_vdbg(&gadget->dev, "VBUS %s\n", is_active ? "on" : "off");
 	udc->vbus_active = (is_active != 0);
 	if (can_pullup(udc))
 		fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP),
@@ -1543,7 +1547,7 @@ static void ep0_req_complete(struct fsl_udc *udc, struct fsl_ep *ep0,
 		udc->ep0_state = WAIT_FOR_SETUP;
 		break;
 	case WAIT_FOR_SETUP:
-		ERR("Unexpected ep0 packets\n");
+		dev_err(&udc->gadget.dev, "Unexpected ep0 packets\n");
 		break;
 	default:
 		ep0stall(udc);
@@ -1612,7 +1616,7 @@ static int process_ep_req(struct fsl_udc *udc, int pipe,
 		errors = hc32_to_cpu(curr_td->size_ioc_sts);
 		if (errors & DTD_ERROR_MASK) {
 			if (errors & DTD_STATUS_HALTED) {
-				ERR("dTD error %08x QH=%d\n", errors, pipe);
+				dev_err(&udc->gadget.dev, "dTD error %08x QH=%d\n", errors, pipe);
 				/* Clear the errors and Halt condition */
 				tmp = hc32_to_cpu(curr_qh->size_ioc_int_sts);
 				tmp &= ~errors;
@@ -1623,32 +1627,35 @@ static int process_ep_req(struct fsl_udc *udc, int pipe,
 				break;
 			}
 			if (errors & DTD_STATUS_DATA_BUFF_ERR) {
-				VDBG("Transfer overflow");
+				dev_vdbg(&udc->gadget.dev, "Transfer overflow\n");
 				status = -EPROTO;
 				break;
 			} else if (errors & DTD_STATUS_TRANSACTION_ERR) {
-				VDBG("ISO error");
+				dev_vdbg(&udc->gadget.dev, "ISO error\n");
 				status = -EILSEQ;
 				break;
 			} else
-				ERR("Unknown error has occurred (0x%x)!\n",
+				dev_err(&udc->gadget.dev,
+					"Unknown error has occurred (0x%x)!\n",
 					errors);
 
 		} else if (hc32_to_cpu(curr_td->size_ioc_sts)
 				& DTD_STATUS_ACTIVE) {
-			VDBG("Request not complete");
+			dev_vdbg(&udc->gadget.dev, "Request not complete\n");
 			status = REQ_UNCOMPLETE;
 			return status;
 		} else if (remaining_length) {
 			if (direction) {
-				VDBG("Transmit dTD remaining length not zero");
+				dev_vdbg(&udc->gadget.dev,
+					 "Transmit dTD remaining length not zero\n");
 				status = -EPROTO;
 				break;
 			} else {
 				break;
 			}
 		} else {
-			VDBG("dTD transmitted successful");
+			dev_vdbg(&udc->gadget.dev,
+				 "dTD transmitted successful\n");
 		}
 
 		if (j != curr_req->dtd_count - 1)
@@ -1691,7 +1698,7 @@ static void dtd_complete_irq(struct fsl_udc *udc)
 
 		/* If the ep is configured */
 		if (!curr_ep->ep.name) {
-			WARNING("Invalid EP?");
+			dev_warn(&udc->gadget.dev, "Invalid EP?\n");
 			continue;
 		}
 
@@ -1700,8 +1707,9 @@ static void dtd_complete_irq(struct fsl_udc *udc)
 				queue) {
 			status = process_ep_req(udc, i, curr_req);
 
-			VDBG("status of process_ep_req= %d, ep = %d",
-					status, ep_num);
+			dev_vdbg(&udc->gadget.dev,
+				 "status of process_ep_req= %d, ep = %d\n",
+				 status, ep_num);
 			if (status == REQ_UNCOMPLETE)
 				break;
 			/* write back status to req */
@@ -1820,7 +1828,7 @@ static void reset_irq(struct fsl_udc *udc)
 	while (fsl_readl(&dr_regs->endpointprime)) {
 		/* Wait until all endptprime bits cleared */
 		if (time_after(jiffies, timeout)) {
-			ERR("Timeout for reset\n");
+			dev_err(&udc->gadget.dev, "Timeout for reset\n");
 			break;
 		}
 		cpu_relax();
@@ -1830,7 +1838,7 @@ static void reset_irq(struct fsl_udc *udc)
 	fsl_writel(0xffffffff, &dr_regs->endptflush);
 
 	if (fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET) {
-		VDBG("Bus reset");
+		dev_vdbg(&udc->gadget.dev, "Bus reset\n");
 		/* Bus is reseting */
 		udc->bus_reset = 1;
 		/* Reset all the queues, include XD, dTD, EP queue
@@ -1838,7 +1846,7 @@ static void reset_irq(struct fsl_udc *udc)
 		reset_queues(udc, true);
 		udc->usb_state = USB_STATE_DEFAULT;
 	} else {
-		VDBG("Controller reset");
+		dev_vdbg(&udc->gadget.dev, "Controller reset\n");
 		/* initialize usb hw reg except for regs for EP, not
 		 * touch usbintr reg */
 		dr_controller_setup(udc);
@@ -1872,7 +1880,7 @@ static irqreturn_t fsl_udc_irq(int irq, void *_udc)
 	/* Clear notification bits */
 	fsl_writel(irq_src, &dr_regs->usbsts);
 
-	/* VDBG("irq_src [0x%8x]", irq_src); */
+	/* dev_vdbg(&udc->gadget.dev, "irq_src [0x%8x]", irq_src); */
 
 	/* Need to resume? */
 	if (udc->usb_state == USB_STATE_SUSPENDED)
@@ -1881,7 +1889,7 @@ static irqreturn_t fsl_udc_irq(int irq, void *_udc)
 
 	/* USB Interrupt */
 	if (irq_src & USB_STS_INT) {
-		VDBG("Packet int");
+		dev_vdbg(&udc->gadget.dev, "Packet int\n");
 		/* Setup package, we only support ep0 as control ep */
 		if (fsl_readl(&dr_regs->endptsetupstat) & EP_SETUP_STATUS_EP0) {
 			tripwire_handler(udc, 0,
@@ -1910,7 +1918,7 @@ static irqreturn_t fsl_udc_irq(int irq, void *_udc)
 
 	/* Reset Received */
 	if (irq_src & USB_STS_RESET) {
-		VDBG("reset int");
+		dev_vdbg(&udc->gadget.dev, "reset int\n");
 		reset_irq(udc);
 		status = IRQ_HANDLED;
 	}
@@ -1922,7 +1930,7 @@ static irqreturn_t fsl_udc_irq(int irq, void *_udc)
 	}
 
 	if (irq_src & (USB_STS_ERR | USB_STS_SYS_ERR)) {
-		VDBG("Error IRQ %x", irq_src);
+		dev_vdbg(&udc->gadget.dev, "Error IRQ %x\n", irq_src);
 	}
 
 	spin_unlock_irqrestore(&udc->lock, flags);
@@ -1958,7 +1966,7 @@ static int fsl_udc_start(struct usb_gadget *g,
 					udc_controller->transceiver->otg,
 						    &udc_controller->gadget);
 			if (retval < 0) {
-				ERR("can't bind to transceiver\n");
+				dev_err(&udc_controller->gadget.dev, "can't bind to transceiver\n");
 				udc_controller->driver = NULL;
 				return retval;
 			}
@@ -2243,7 +2251,7 @@ static int struct_udc_setup(struct fsl_udc *udc,
 
 	udc->eps = kcalloc(udc->max_ep, sizeof(struct fsl_ep), GFP_KERNEL);
 	if (!udc->eps) {
-		ERR("kmalloc udc endpoint status failed\n");
+		dev_err(&udc->gadget.dev, "kmalloc udc endpoint status failed\n");
 		goto eps_alloc_failed;
 	}
 
@@ -2258,7 +2266,7 @@ static int struct_udc_setup(struct fsl_udc *udc,
 	udc->ep_qh = dma_alloc_coherent(&pdev->dev, size,
 					&udc->ep_qh_dma, GFP_KERNEL);
 	if (!udc->ep_qh) {
-		ERR("malloc QHs for udc failed\n");
+		dev_err(&udc->gadget.dev, "malloc QHs for udc failed\n");
 		goto ep_queue_alloc_failed;
 	}
 
@@ -2269,14 +2277,14 @@ static int struct_udc_setup(struct fsl_udc *udc,
 	udc->status_req = container_of(fsl_alloc_request(NULL, GFP_KERNEL),
 			struct fsl_req, req);
 	if (!udc->status_req) {
-		ERR("kzalloc for udc status request failed\n");
+		dev_err(&udc->gadget.dev, "kzalloc for udc status request failed\n");
 		goto udc_status_alloc_failed;
 	}
 
 	/* allocate a small amount of memory to get valid address */
 	udc->status_req->req.buf = kmalloc(8, GFP_KERNEL);
 	if (!udc->status_req->req.buf) {
-		ERR("kzalloc for udc request buffer failed\n");
+		dev_err(&udc->gadget.dev, "kzalloc for udc request buffer failed\n");
 		goto udc_req_buf_alloc_failed;
 	}
 
@@ -2373,7 +2381,7 @@ static int fsl_udc_probe(struct platform_device *pdev)
 	if (pdata->operating_mode == FSL_USB2_DR_OTG) {
 		udc_controller->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
 		if (IS_ERR_OR_NULL(udc_controller->transceiver)) {
-			ERR("Can't find OTG driver!\n");
+			dev_err(&udc_controller->gadget.dev, "Can't find OTG driver!\n");
 			ret = -ENODEV;
 			goto err_kfree;
 		}
@@ -2389,7 +2397,7 @@ static int fsl_udc_probe(struct platform_device *pdev)
 	if (pdata->operating_mode == FSL_USB2_DR_DEVICE) {
 		if (!request_mem_region(res->start, resource_size(res),
 					driver_name)) {
-			ERR("request mem region for %s failed\n", pdev->name);
+			dev_err(&udc_controller->gadget.dev, "request mem region for %s failed\n", pdev->name);
 			ret = -EBUSY;
 			goto err_kfree;
 		}
@@ -2420,7 +2428,7 @@ static int fsl_udc_probe(struct platform_device *pdev)
 	/* Read Device Controller Capability Parameters register */
 	dccparams = fsl_readl(&dr_regs->dccparams);
 	if (!(dccparams & DCCPARAMS_DC)) {
-		ERR("This SOC doesn't support device role\n");
+		dev_err(&udc_controller->gadget.dev, "This SOC doesn't support device role\n");
 		ret = -ENODEV;
 		goto err_exit;
 	}
@@ -2438,14 +2446,14 @@ static int fsl_udc_probe(struct platform_device *pdev)
 	ret = request_irq(udc_controller->irq, fsl_udc_irq, IRQF_SHARED,
 			driver_name, udc_controller);
 	if (ret != 0) {
-		ERR("cannot request irq %d err %d\n",
+		dev_err(&udc_controller->gadget.dev, "cannot request irq %d err %d\n",
 				udc_controller->irq, ret);
 		goto err_exit;
 	}
 
 	/* Initialize the udc structure including QH member and other member */
 	if (struct_udc_setup(udc_controller, pdev)) {
-		ERR("Can't initialize udc data structure\n");
+		dev_err(&udc_controller->gadget.dev, "Can't initialize udc data structure\n");
 		ret = -ENOMEM;
 		goto err_free_irq;
 	}
@@ -2486,7 +2494,7 @@ static int fsl_udc_probe(struct platform_device *pdev)
 	/* setup the udc->eps[] for non-control endpoints and link
 	 * to gadget.ep_list */
 	for (i = 1; i < (int)(udc_controller->max_ep / 2); i++) {
-		char name[14];
+		char name[16];
 
 		sprintf(name, "ep%dout", i);
 		struct_ep_setup(udc_controller, i * 2, name, 1);
@@ -2666,6 +2674,15 @@ static const struct platform_device_id fsl_udc_devtype[] = {
 	}
 };
 MODULE_DEVICE_TABLE(platform, fsl_udc_devtype);
+
+static const struct of_device_id fsl_udc_dt_ids[] = {
+	{ .compatible = "fsl-usb2-dr" },
+	{ .compatible = "fsl-usb2-mph" },
+	{ .compatible = "fsl,mpc5121-usb2-dr" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, fsl_udc_dt_ids);
+
 static struct platform_driver udc_driver = {
 	.probe		= fsl_udc_probe,
 	.remove_new	= fsl_udc_remove,
@@ -2675,6 +2692,7 @@ static struct platform_driver udc_driver = {
 	.resume		= fsl_udc_resume,
 	.driver		= {
 			.name = driver_name,
+			.of_match_table = fsl_udc_dt_ids,
 			/* udc suspend/resume called from OTG driver */
 			.suspend = fsl_udc_otg_suspend,
 			.resume  = fsl_udc_otg_resume,
diff --git a/drivers/usb/gadget/udc/fsl_usb2_udc.h b/drivers/usb/gadget/udc/fsl_usb2_udc.h
index 2efc5a930b..cc1756f3e8 100644
--- a/drivers/usb/gadget/udc/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/udc/fsl_usb2_udc.h
@@ -508,53 +508,6 @@ struct fsl_udc {
 
 /*-------------------------------------------------------------------------*/
 
-#ifdef DEBUG
-#define DBG(fmt, args...) 	printk(KERN_DEBUG "[%s]  " fmt "\n", \
-				__func__, ## args)
-#else
-#define DBG(fmt, args...)	do{}while(0)
-#endif
-
-#if 0
-static void dump_msg(const char *label, const u8 * buf, unsigned int length)
-{
-	unsigned int start, num, i;
-	char line[52], *p;
-
-	if (length >= 512)
-		return;
-	DBG("%s, length %u:\n", label, length);
-	start = 0;
-	while (length > 0) {
-		num = min(length, 16u);
-		p = line;
-		for (i = 0; i < num; ++i) {
-			if (i == 8)
-				*p++ = ' ';
-			sprintf(p, " %02x", buf[i]);
-			p += 3;
-		}
-		*p = 0;
-		printk(KERN_DEBUG "%6x: %s\n", start, line);
-		buf += num;
-		start += num;
-		length -= num;
-	}
-}
-#endif
-
-#ifdef VERBOSE
-#define VDBG		DBG
-#else
-#define VDBG(stuff...)	do{}while(0)
-#endif
-
-#define ERR(stuff...)		pr_err("udc: " stuff)
-#define WARNING(stuff...)	pr_warn("udc: " stuff)
-#define INFO(stuff...)		pr_info("udc: " stuff)
-
-/*-------------------------------------------------------------------------*/
-
 /* ### Add board specific defines here
  */
 
diff --git a/drivers/usb/gadget/udc/max3420_udc.c b/drivers/usb/gadget/udc/max3420_udc.c
index 89e8cf2a2a..7349ea774a 100644
--- a/drivers/usb/gadget/udc/max3420_udc.c
+++ b/drivers/usb/gadget/udc/max3420_udc.c
@@ -1201,7 +1201,7 @@ static int max3420_probe(struct spi_device *spi)
 	int err, irq;
 	u8 reg[8];
 
-	if (spi->master->flags & SPI_CONTROLLER_HALF_DUPLEX) {
+	if (spi->controller->flags & SPI_CONTROLLER_HALF_DUPLEX) {
 		dev_err(&spi->dev, "UDC needs full duplex to work\n");
 		return -EINVAL;
 	}
diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c
index 61424cfd2e..1a6317e4b2 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.c
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -24,7 +24,6 @@
 #include <linux/byteorder/generic.h>
 #include <linux/platform_data/pxa2xx_udc.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 
 #include <linux/usb.h>
 #include <linux/usb/ch9.h>
diff --git a/drivers/usb/gadget/udc/snps_udc_plat.c b/drivers/usb/gadget/udc/snps_udc_plat.c
index 547af2ed9e..ba5a066905 100644
--- a/drivers/usb/gadget/udc/snps_udc_plat.c
+++ b/drivers/usb/gadget/udc/snps_udc_plat.c
@@ -8,7 +8,6 @@
 #include <linux/extcon.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
-#include <linux/of_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
 #include <linux/module.h>
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 6c47ab0a49..ad145a54ca 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -66,6 +66,15 @@ struct orion_ehci_hcd {
 static struct hc_driver __read_mostly ehci_orion_hc_driver;
 
 /*
+ * Legacy DMA mask is 32 bit.
+ * AC5 has the DDR starting at 8GB, hence it requires
+ * a larger (34-bit) DMA mask, in order for DMA allocations
+ * to succeed:
+ */
+static const u64 dma_mask_orion =	DMA_BIT_MASK(32);
+static const u64 dma_mask_ac5 =		DMA_BIT_MASK(34);
+
+/*
  * Implement Orion USB controller specification guidelines
  */
 static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
@@ -211,6 +220,7 @@ static int ehci_orion_drv_probe(struct platform_device *pdev)
 	int irq, err;
 	enum orion_ehci_phy_ver phy_version;
 	struct orion_ehci_hcd *priv;
+	u64 *dma_mask_ptr;
 
 	if (usb_disabled())
 		return -ENODEV;
@@ -228,7 +238,8 @@ static int ehci_orion_drv_probe(struct platform_device *pdev)
 	 * set. Since shared usb code relies on it, set it here for
 	 * now. Once we have dma capability bindings this can go away.
 	 */
-	err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	dma_mask_ptr = (u64 *)of_device_get_match_data(&pdev->dev);
+	err = dma_coerce_mask_and_coherent(&pdev->dev, *dma_mask_ptr);
 	if (err)
 		goto err;
 
@@ -332,8 +343,9 @@ static void ehci_orion_drv_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id ehci_orion_dt_ids[] = {
-	{ .compatible = "marvell,orion-ehci", },
-	{ .compatible = "marvell,armada-3700-ehci", },
+	{ .compatible = "marvell,orion-ehci", .data = &dma_mask_orion},
+	{ .compatible = "marvell,armada-3700-ehci", .data = &dma_mask_orion},
+	{ .compatible = "marvell,ac5-ehci", .data = &dma_mask_ac5},
 	{},
 };
 MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids);
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 357d9aee38..3348c25ddb 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -27,7 +27,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
-#include <linux/of_gpio.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/pxa2xx_udc.h>
 #include <linux/platform_device.h>
diff --git a/drivers/usb/host/xhci-caps.h b/drivers/usb/host/xhci-caps.h
new file mode 100644
index 0000000000..9e94cebf4a
--- /dev/null
+++ b/drivers/usb/host/xhci-caps.h
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/* hc_capbase bitmasks */
+/* bits 7:0 - how long is the Capabilities register */
+#define HC_LENGTH(p)		XHCI_HC_LENGTH(p)
+/* bits 31:16	*/
+#define HC_VERSION(p)		(((p) >> 16) & 0xffff)
+
+/* HCSPARAMS1 - hcs_params1 - bitmasks */
+/* bits 0:7, Max Device Slots */
+#define HCS_MAX_SLOTS(p)	(((p) >> 0) & 0xff)
+#define HCS_SLOTS_MASK		0xff
+/* bits 8:18, Max Interrupters */
+#define HCS_MAX_INTRS(p)	(((p) >> 8) & 0x7ff)
+/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */
+#define HCS_MAX_PORTS(p)	(((p) >> 24) & 0x7f)
+
+/* HCSPARAMS2 - hcs_params2 - bitmasks */
+/* bits 0:3, frames or uframes that SW needs to queue transactions
+ * ahead of the HW to meet periodic deadlines */
+#define HCS_IST(p)		(((p) >> 0) & 0xf)
+/* bits 4:7, max number of Event Ring segments */
+#define HCS_ERST_MAX(p)		(((p) >> 4) & 0xf)
+/* bits 21:25 Hi 5 bits of Scratchpad buffers SW must allocate for the HW */
+/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
+/* bits 27:31 Lo 5 bits of Scratchpad buffers SW must allocate for the HW */
+#define HCS_MAX_SCRATCHPAD(p)   ((((p) >> 16) & 0x3e0) | (((p) >> 27) & 0x1f))
+
+/* HCSPARAMS3 - hcs_params3 - bitmasks */
+/* bits 0:7, Max U1 to U0 latency for the roothub ports */
+#define HCS_U1_LATENCY(p)	(((p) >> 0) & 0xff)
+/* bits 16:31, Max U2 to U0 latency for the roothub ports */
+#define HCS_U2_LATENCY(p)	(((p) >> 16) & 0xffff)
+
+/* HCCPARAMS - hcc_params - bitmasks */
+/* true: HC can use 64-bit address pointers */
+#define HCC_64BIT_ADDR(p)	((p) & (1 << 0))
+/* true: HC can do bandwidth negotiation */
+#define HCC_BANDWIDTH_NEG(p)	((p) & (1 << 1))
+/* true: HC uses 64-byte Device Context structures
+ * FIXME 64-byte context structures aren't supported yet.
+ */
+#define HCC_64BYTE_CONTEXT(p)	((p) & (1 << 2))
+/* true: HC has port power switches */
+#define HCC_PPC(p)		((p) & (1 << 3))
+/* true: HC has port indicators */
+#define HCS_INDICATOR(p)	((p) & (1 << 4))
+/* true: HC has Light HC Reset Capability */
+#define HCC_LIGHT_RESET(p)	((p) & (1 << 5))
+/* true: HC supports latency tolerance messaging */
+#define HCC_LTC(p)		((p) & (1 << 6))
+/* true: no secondary Stream ID Support */
+#define HCC_NSS(p)		((p) & (1 << 7))
+/* true: HC supports Stopped - Short Packet */
+#define HCC_SPC(p)		((p) & (1 << 9))
+/* true: HC has Contiguous Frame ID Capability */
+#define HCC_CFC(p)		((p) & (1 << 11))
+/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */
+#define HCC_MAX_PSA(p)		(1 << ((((p) >> 12) & 0xf) + 1))
+/* Extended Capabilities pointer from PCI base - section 5.3.6 */
+#define HCC_EXT_CAPS(p)		XHCI_HCC_EXT_CAPS(p)
+
+#define CTX_SIZE(_hcc)		(HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
+
+/* db_off bitmask - bits 0:1 reserved */
+#define	DBOFF_MASK	(~0x3)
+
+/* run_regs_off bitmask - bits 0:4 reserved */
+#define	RTSOFF_MASK	(~0x1f)
+
+/* HCCPARAMS2 - hcc_params2 - bitmasks */
+/* true: HC supports U3 entry Capability */
+#define	HCC2_U3C(p)		((p) & (1 << 0))
+/* true: HC supports Configure endpoint command Max exit latency too large */
+#define	HCC2_CMC(p)		((p) & (1 << 1))
+/* true: HC supports Force Save context Capability */
+#define	HCC2_FSC(p)		((p) & (1 << 2))
+/* true: HC supports Compliance Transition Capability */
+#define	HCC2_CTC(p)		((p) & (1 << 3))
+/* true: HC support Large ESIT payload Capability > 48k */
+#define	HCC2_LEC(p)		((p) & (1 << 4))
+/* true: HC support Configuration Information Capability */
+#define	HCC2_CIC(p)		((p) & (1 << 5))
+/* true: HC support Extended TBC Capability, Isoc burst count > 65535 */
+#define	HCC2_ETC(p)		((p) & (1 << 6))
diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c
index d82935d311..8a9869ef0d 100644
--- a/drivers/usb/host/xhci-dbgcap.c
+++ b/drivers/usb/host/xhci-dbgcap.c
@@ -634,7 +634,8 @@ static int xhci_dbc_start(struct xhci_dbc *dbc)
 		return ret;
 	}
 
-	return mod_delayed_work(system_wq, &dbc->event_work, 1);
+	return mod_delayed_work(system_wq, &dbc->event_work,
+				msecs_to_jiffies(dbc->poll_interval));
 }
 
 static void xhci_dbc_stop(struct xhci_dbc *dbc)
@@ -899,8 +900,10 @@ static void xhci_dbc_handle_events(struct work_struct *work)
 	enum evtreturn		evtr;
 	struct xhci_dbc		*dbc;
 	unsigned long		flags;
+	unsigned int		poll_interval;
 
 	dbc = container_of(to_delayed_work(work), struct xhci_dbc, event_work);
+	poll_interval = dbc->poll_interval;
 
 	spin_lock_irqsave(&dbc->lock, flags);
 	evtr = xhci_dbc_do_handle_events(dbc);
@@ -916,13 +919,18 @@ static void xhci_dbc_handle_events(struct work_struct *work)
 			dbc->driver->disconnect(dbc);
 		break;
 	case EVT_DONE:
+		/* set fast poll rate if there are pending data transfers */
+		if (!list_empty(&dbc->eps[BULK_OUT].list_pending) ||
+		    !list_empty(&dbc->eps[BULK_IN].list_pending))
+			poll_interval = 1;
 		break;
 	default:
 		dev_info(dbc->dev, "stop handling dbc events\n");
 		return;
 	}
 
-	mod_delayed_work(system_wq, &dbc->event_work, 1);
+	mod_delayed_work(system_wq, &dbc->event_work,
+			 msecs_to_jiffies(poll_interval));
 }
 
 static const char * const dbc_state_strings[DS_MAX] = {
@@ -1175,6 +1183,7 @@ xhci_alloc_dbc(struct device *dev, void __iomem *base, const struct dbc_driver *
 	dbc->idVendor = DBC_VENDOR_ID;
 	dbc->bcdDevice = DBC_DEVICE_REV;
 	dbc->bInterfaceProtocol = DBC_PROTOCOL;
+	dbc->poll_interval = DBC_POLL_INTERVAL_DEFAULT;
 
 	if (readl(&dbc->regs->control) & DBC_CTRL_DBC_ENABLE)
 		goto err;
diff --git a/drivers/usb/host/xhci-dbgcap.h b/drivers/usb/host/xhci-dbgcap.h
index e39e3ae167..92661b555c 100644
--- a/drivers/usb/host/xhci-dbgcap.h
+++ b/drivers/usb/host/xhci-dbgcap.h
@@ -94,6 +94,7 @@ struct dbc_ep {
 
 #define DBC_QUEUE_SIZE			16
 #define DBC_WRITE_BUF_SIZE		8192
+#define DBC_POLL_INTERVAL_DEFAULT	64	/* milliseconds */
 
 /*
  * Private structure for DbC hardware state:
@@ -140,6 +141,7 @@ struct xhci_dbc {
 
 	enum dbc_state			state;
 	struct delayed_work		event_work;
+	unsigned int			poll_interval;	/* ms */
 	unsigned			resume_required:1;
 	struct dbc_ep			eps[2];
 
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 0980ade2a2..61f083de6e 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -448,38 +448,6 @@ u32 xhci_port_state_to_neutral(u32 state)
 }
 EXPORT_SYMBOL_GPL(xhci_port_state_to_neutral);
 
-/**
- * xhci_find_slot_id_by_port() - Find slot id of a usb device on a roothub port
- * @hcd: pointer to hcd of the roothub
- * @xhci: pointer to xhci structure
- * @port: one-based port number of the port in this roothub.
- *
- * Return: Slot id of the usb device connected to the root port, 0 if not found
- */
-
-int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
-		u16 port)
-{
-	int slot_id;
-	int i;
-	enum usb_device_speed speed;
-
-	slot_id = 0;
-	for (i = 0; i < MAX_HC_SLOTS; i++) {
-		if (!xhci->devs[i] || !xhci->devs[i]->udev)
-			continue;
-		speed = xhci->devs[i]->udev->speed;
-		if (((speed >= USB_SPEED_SUPER) == (hcd->speed >= HCD_USB3))
-				&& xhci->devs[i]->fake_port == port) {
-			slot_id = i;
-			break;
-		}
-	}
-
-	return slot_id;
-}
-EXPORT_SYMBOL_GPL(xhci_find_slot_id_by_port);
-
 /*
  * Stop device
  * It issues stop endpoint command for EP 0 to 30. And wait the last command
@@ -930,7 +898,6 @@ static int xhci_handle_usb2_port_link_resume(struct xhci_port *port,
 	struct xhci_bus_state *bus_state;
 	struct xhci_hcd	*xhci;
 	struct usb_hcd *hcd;
-	int slot_id;
 	u32 wIndex;
 
 	hcd = port->rhub->hcd;
@@ -986,13 +953,11 @@ static int xhci_handle_usb2_port_link_resume(struct xhci_port *port,
 		spin_lock_irqsave(&xhci->lock, *flags);
 
 		if (time_left) {
-			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-							    wIndex + 1);
-			if (!slot_id) {
+			if (!port->slot_id) {
 				xhci_dbg(xhci, "slot_id is zero\n");
 				return -ENODEV;
 			}
-			xhci_ring_device(xhci, slot_id);
+			xhci_ring_device(xhci, port->slot_id);
 		} else {
 			int port_status = readl(port->addr);
 
@@ -1202,7 +1167,6 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 	unsigned long flags;
 	u32 temp, status;
 	int retval = 0;
-	int slot_id;
 	struct xhci_bus_state *bus_state;
 	u16 link_state = 0;
 	u16 wake_mask = 0;
@@ -1332,15 +1296,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				goto error;
 			}
 
-			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-							    portnum1);
-			if (!slot_id) {
+			if (!port->slot_id) {
 				xhci_warn(xhci, "slot_id is zero\n");
 				goto error;
 			}
 			/* unlock to execute stop endpoint commands */
 			spin_unlock_irqrestore(&xhci->lock, flags);
-			xhci_stop_device(xhci, slot_id, 1);
+			xhci_stop_device(xhci, port->slot_id, 1);
 			spin_lock_irqsave(&xhci->lock, flags);
 
 			xhci_set_link_state(xhci, port, XDEV_U3);
@@ -1463,14 +1425,12 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 
 			if (link_state == USB_SS_PORT_LS_U3) {
 				int retries = 16;
-				slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-								    portnum1);
-				if (slot_id) {
+				if (port->slot_id) {
 					/* unlock to execute stop endpoint
 					 * commands */
 					spin_unlock_irqrestore(&xhci->lock,
 								flags);
-					xhci_stop_device(xhci, slot_id, 1);
+					xhci_stop_device(xhci, port->slot_id, 1);
 					spin_lock_irqsave(&xhci->lock, flags);
 				}
 				xhci_set_link_state(xhci, port, USB_SS_PORT_LS_U3);
@@ -1584,13 +1544,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			}
 			bus_state->port_c_suspend |= 1 << wIndex;
 
-			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-					portnum1);
-			if (!slot_id) {
+			if (!port->slot_id) {
 				xhci_dbg(xhci, "slot_id is zero\n");
 				goto error;
 			}
-			xhci_ring_device(xhci, slot_id);
+			xhci_ring_device(xhci, port->slot_id);
 			break;
 		case USB_PORT_FEAT_C_SUSPEND:
 			bus_state->port_c_suspend &= ~(1 << wIndex);
@@ -1821,10 +1779,7 @@ retry:
 		if (!portsc_buf[port_index])
 			continue;
 		if (test_bit(port_index, &bus_state->bus_suspended)) {
-			int slot_id;
-
-			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-							    port_index + 1);
+			int slot_id = ports[port_index]->slot_id;
 			if (slot_id) {
 				spin_unlock_irqrestore(&xhci->lock, flags);
 				xhci_stop_device(xhci, slot_id, 1);
@@ -1877,7 +1832,6 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 	struct xhci_bus_state *bus_state;
 	unsigned long flags;
 	int max_ports, port_index;
-	int slot_id;
 	int sret;
 	u32 next_state;
 	u32 temp, portsc;
@@ -1970,9 +1924,8 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 			continue;
 		}
 		xhci_test_and_clear_bit(xhci, ports[port_index], PORT_PLC);
-		slot_id = xhci_find_slot_id_by_port(hcd, xhci, port_index + 1);
-		if (slot_id)
-			xhci_ring_device(xhci, slot_id);
+		if (ports[port_index]->slot_id)
+			xhci_ring_device(xhci, ports[port_index]->slot_id);
 	}
 	(void) readl(&xhci->op_regs->command);
 
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 450adaca68..990008aebe 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -84,7 +84,7 @@ static void xhci_free_segments_for_ring(struct xhci_hcd *xhci,
 	struct xhci_segment *seg;
 
 	seg = first->next;
-	while (seg != first) {
+	while (seg && seg != first) {
 		struct xhci_segment *next = seg->next;
 		xhci_segment_free(xhci, seg);
 		seg = next;
@@ -351,17 +351,10 @@ static int xhci_alloc_segments_for_ring(struct xhci_hcd *xhci,
 
 		next = xhci_segment_alloc(xhci, cycle_state, max_packet, num,
 					  flags);
-		if (!next) {
-			prev = *first;
-			while (prev) {
-				next = prev->next;
-				xhci_segment_free(xhci, prev);
-				prev = next;
-			}
-			return -ENOMEM;
-		}
-		xhci_link_segments(prev, next, type, chain_links);
+		if (!next)
+			goto free_segments;
 
+		xhci_link_segments(prev, next, type, chain_links);
 		prev = next;
 		num++;
 	}
@@ -369,6 +362,10 @@ static int xhci_alloc_segments_for_ring(struct xhci_hcd *xhci,
 	*last = prev;
 
 	return 0;
+
+free_segments:
+	xhci_free_segments_for_ring(xhci, *first);
+	return -ENOMEM;
 }
 
 /*
@@ -444,19 +441,11 @@ int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
 	if (ret)
 		return -ENOMEM;
 
-	if (ring->type == TYPE_STREAM)
+	if (ring->type == TYPE_STREAM) {
 		ret = xhci_update_stream_segment_mapping(ring->trb_address_map,
 						ring, first, last, flags);
-	if (ret) {
-		struct xhci_segment *next;
-		do {
-			next = first->next;
-			xhci_segment_free(xhci, first);
-			if (first == last)
-				break;
-			first = next;
-		} while (true);
-		return ret;
+		if (ret)
+			goto free_segments;
 	}
 
 	xhci_link_rings(xhci, ring, first, last, num_new_segs);
@@ -466,6 +455,10 @@ int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
 			ring->num_segs);
 
 	return 0;
+
+free_segments:
+	xhci_free_segments_for_ring(xhci, first);
+	return ret;
 }
 
 struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
@@ -789,15 +782,14 @@ static void xhci_free_tt_info(struct xhci_hcd *xhci,
 	bool slot_found = false;
 
 	/* If the device never made it past the Set Address stage,
-	 * it may not have the real_port set correctly.
+	 * it may not have the root hub port pointer set correctly.
 	 */
-	if (virt_dev->real_port == 0 ||
-			virt_dev->real_port > HCS_MAX_PORTS(xhci->hcs_params1)) {
-		xhci_dbg(xhci, "Bad real port.\n");
+	if (!virt_dev->rhub_port) {
+		xhci_dbg(xhci, "Bad rhub port.\n");
 		return;
 	}
 
-	tt_list_head = &(xhci->rh_bw[virt_dev->real_port - 1].tts);
+	tt_list_head = &(xhci->rh_bw[virt_dev->rhub_port->hw_portnum].tts);
 	list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) {
 		/* Multi-TT hubs will have more than one entry */
 		if (tt_info->slot_id == slot_id) {
@@ -834,7 +826,7 @@ int xhci_alloc_tt_info(struct xhci_hcd *xhci,
 			goto free_tts;
 		INIT_LIST_HEAD(&tt_info->tt_list);
 		list_add(&tt_info->tt_list,
-				&xhci->rh_bw[virt_dev->real_port - 1].tts);
+				&xhci->rh_bw[virt_dev->rhub_port->hw_portnum].tts);
 		tt_info->slot_id = virt_dev->udev->slot_id;
 		if (tt->multi)
 			tt_info->ttport = i+1;
@@ -908,6 +900,8 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 
 	if (dev->udev && dev->udev->slot_id)
 		dev->udev->slot_id = 0;
+	if (dev->rhub_port && dev->rhub_port->slot_id == slot_id)
+		dev->rhub_port->slot_id = 0;
 	kfree(xhci->devs[slot_id]);
 	xhci->devs[slot_id] = NULL;
 }
@@ -929,13 +923,12 @@ static void xhci_free_virt_devices_depth_first(struct xhci_hcd *xhci, int slot_i
 	if (!vdev)
 		return;
 
-	if (vdev->real_port == 0 ||
-			vdev->real_port > HCS_MAX_PORTS(xhci->hcs_params1)) {
-		xhci_dbg(xhci, "Bad vdev->real_port.\n");
+	if (!vdev->rhub_port) {
+		xhci_dbg(xhci, "Bad rhub port.\n");
 		goto out;
 	}
 
-	tt_list_head = &(xhci->rh_bw[vdev->real_port - 1].tts);
+	tt_list_head = &(xhci->rh_bw[vdev->rhub_port->hw_portnum].tts);
 	list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) {
 		/* is this a hub device that added a tt_info to the tts list */
 		if (tt_info->slot_id == slot_id) {
@@ -1051,16 +1044,16 @@ void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
  * The xHCI roothub may have ports of differing speeds in any order in the port
  * status registers.
  *
- * The xHCI hardware wants to know the roothub port number that the USB device
+ * The xHCI hardware wants to know the roothub port that the USB device
  * is attached to (or the roothub port its ancestor hub is attached to).  All we
  * know is the index of that port under either the USB 2.0 or the USB 3.0
  * roothub, but that doesn't give us the real index into the HW port status
- * registers. Call xhci_find_raw_port_number() to get real index.
+ * registers.
  */
-static u32 xhci_find_real_port_number(struct xhci_hcd *xhci,
-		struct usb_device *udev)
+static struct xhci_port *xhci_find_rhub_port(struct xhci_hcd *xhci, struct usb_device *udev)
 {
 	struct usb_device *top_dev;
+	struct xhci_hub *rhub;
 	struct usb_hcd *hcd;
 
 	if (udev->speed >= USB_SPEED_SUPER)
@@ -1072,7 +1065,8 @@ static u32 xhci_find_real_port_number(struct xhci_hcd *xhci,
 			top_dev = top_dev->parent)
 		/* Found device below root hub */;
 
-	return	xhci_find_raw_port_number(hcd, top_dev->portnum);
+	rhub = xhci_get_rhub(hcd);
+	return rhub->ports[top_dev->portnum - 1];
 }
 
 /* Setup an xHCI virtual device for a Set Address command */
@@ -1081,9 +1075,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	struct xhci_virt_device *dev;
 	struct xhci_ep_ctx	*ep0_ctx;
 	struct xhci_slot_ctx    *slot_ctx;
-	u32			port_num;
 	u32			max_packets;
-	struct usb_device *top_dev;
 
 	dev = xhci->devs[udev->slot_id];
 	/* Slot ID 0 is reserved */
@@ -1124,18 +1116,15 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 		return -EINVAL;
 	}
 	/* Find the root hub port this device is under */
-	port_num = xhci_find_real_port_number(xhci, udev);
-	if (!port_num)
+	dev->rhub_port = xhci_find_rhub_port(xhci, udev);
+	if (!dev->rhub_port)
 		return -EINVAL;
-	slot_ctx->dev_info2 |= cpu_to_le32(ROOT_HUB_PORT(port_num));
-	/* Set the port number in the virtual_device to the faked port number */
-	for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
-			top_dev = top_dev->parent)
-		/* Found device below root hub */;
-	dev->fake_port = top_dev->portnum;
-	dev->real_port = port_num;
-	xhci_dbg(xhci, "Set root hub portnum to %d\n", port_num);
-	xhci_dbg(xhci, "Set fake root hub portnum to %d\n", dev->fake_port);
+	/* Slot ID is set to the device directly below the root hub */
+	if (!udev->parent->parent)
+		dev->rhub_port->slot_id = udev->slot_id;
+	slot_ctx->dev_info2 |= cpu_to_le32(ROOT_HUB_PORT(dev->rhub_port->hw_portnum + 1));
+	xhci_dbg(xhci, "Slot ID %d: HW portnum %d, hcd portnum %d\n",
+		 udev->slot_id, dev->rhub_port->hw_portnum, dev->rhub_port->hcd_portnum);
 
 	/* Find the right bandwidth table that this device will be a part of.
 	 * If this is a full speed device attached directly to a root port (or a
@@ -1144,12 +1133,12 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	 * will never be created for the HS root hub.
 	 */
 	if (!udev->tt || !udev->tt->hub->parent) {
-		dev->bw_table = &xhci->rh_bw[port_num - 1].bw_table;
+		dev->bw_table = &xhci->rh_bw[dev->rhub_port->hw_portnum].bw_table;
 	} else {
 		struct xhci_root_port_bw_info *rh_bw;
 		struct xhci_tt_bw_info *tt_bw;
 
-		rh_bw = &xhci->rh_bw[port_num - 1];
+		rh_bw = &xhci->rh_bw[dev->rhub_port->hw_portnum];
 		/* Find the right TT. */
 		list_for_each_entry(tt_bw, &rh_bw->tts, tt_list) {
 			if (tt_bw->slot_id != udev->tt->hub->slot_id)
@@ -2280,24 +2269,24 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
 }
 
 static struct xhci_interrupter *
-xhci_alloc_interrupter(struct xhci_hcd *xhci, int segs, gfp_t flags)
+xhci_alloc_interrupter(struct xhci_hcd *xhci, unsigned int segs, gfp_t flags)
 {
 	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
 	struct xhci_interrupter *ir;
-	unsigned int num_segs = segs;
+	unsigned int max_segs;
 	int ret;
 
+	if (!segs)
+		segs = ERST_DEFAULT_SEGS;
+
+	max_segs = BIT(HCS_ERST_MAX(xhci->hcs_params2));
+	segs = min(segs, max_segs);
+
 	ir = kzalloc_node(sizeof(*ir), flags, dev_to_node(dev));
 	if (!ir)
 		return NULL;
 
-	/* number of ring segments should be greater than 0 */
-	if (segs <= 0)
-		num_segs = min_t(unsigned int, 1 << HCS_ERST_MAX(xhci->hcs_params2),
-			 ERST_MAX_SEGS);
-
-	ir->event_ring = xhci_ring_alloc(xhci, num_segs, 1, TYPE_EVENT, 0,
-					 flags);
+	ir->event_ring = xhci_ring_alloc(xhci, segs, 1, TYPE_EVENT, 0, flags);
 	if (!ir->event_ring) {
 		xhci_warn(xhci, "Failed to allocate interrupter event ring\n");
 		kfree(ir);
@@ -2355,7 +2344,7 @@ xhci_add_interrupter(struct xhci_hcd *xhci, struct xhci_interrupter *ir,
 }
 
 struct xhci_interrupter *
-xhci_create_secondary_interrupter(struct usb_hcd *hcd, int num_seg)
+xhci_create_secondary_interrupter(struct usb_hcd *hcd, unsigned int segs)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 	struct xhci_interrupter *ir;
@@ -2365,7 +2354,7 @@ xhci_create_secondary_interrupter(struct usb_hcd *hcd, int num_seg)
 	if (!xhci->interrupters || xhci->max_interrupters <= 1)
 		return NULL;
 
-	ir = xhci_alloc_interrupter(xhci, num_seg, GFP_KERNEL);
+	ir = xhci_alloc_interrupter(xhci, segs, GFP_KERNEL);
 	if (!ir)
 		return NULL;
 
diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c
index 61f3f8bbdc..27eb384a39 100644
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -122,10 +122,6 @@ static u32 get_bw_boundary(enum usb_device_speed speed)
 * each HS root port is treated as a single bandwidth domain,
 * but each SS root port is treated as two bandwidth domains, one for IN eps,
 * one for OUT eps.
-* @real_port value is defined as follow according to xHCI spec:
-* 1 for SSport0, ..., N+1 for SSportN, N+2 for HSport0, N+3 for HSport1, etc
-* so the bandwidth domain array is organized as follow for simplification:
-* SSport0-OUT, SSport0-IN, ..., SSportX-OUT, SSportX-IN, HSport0, ..., HSportY
 */
 static struct mu3h_sch_bw_info *
 get_bw_info(struct xhci_hcd_mtk *mtk, struct usb_device *udev,
@@ -136,19 +132,19 @@ get_bw_info(struct xhci_hcd_mtk *mtk, struct usb_device *udev,
 	int bw_index;
 
 	virt_dev = xhci->devs[udev->slot_id];
-	if (!virt_dev->real_port) {
-		WARN_ONCE(1, "%s invalid real_port\n", dev_name(&udev->dev));
+	if (!virt_dev->rhub_port) {
+		WARN_ONCE(1, "%s invalid rhub port\n", dev_name(&udev->dev));
 		return NULL;
 	}
 
 	if (udev->speed >= USB_SPEED_SUPER) {
 		if (usb_endpoint_dir_out(&ep->desc))
-			bw_index = (virt_dev->real_port - 1) * 2;
+			bw_index = (virt_dev->rhub_port->hw_portnum) * 2;
 		else
-			bw_index = (virt_dev->real_port - 1) * 2 + 1;
+			bw_index = (virt_dev->rhub_port->hw_portnum) * 2 + 1;
 	} else {
 		/* add one more for each SS port */
-		bw_index = virt_dev->real_port + xhci->usb3_rhub.num_ports - 1;
+		bw_index = virt_dev->rhub_port->hw_portnum + xhci->usb3_rhub.num_ports;
 	}
 
 	return &mtk->sch_array[bw_index];
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index b534ca9752..febf647234 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -36,6 +36,7 @@
 
 #define PCI_VENDOR_ID_ETRON		0x1b6f
 #define PCI_DEVICE_ID_EJ168		0x7023
+#define PCI_DEVICE_ID_EJ188		0x7052
 
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI	0x8c31
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI	0x9c31
@@ -270,17 +271,12 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 				"QUIRK: Fresco Logic revision %u "
 				"has broken MSI implementation",
 				pdev->revision);
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 	}
 
 	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
 			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1009)
 		xhci->quirks |= XHCI_BROKEN_STREAMS;
 
-	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
-			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1100)
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
-
 	if (pdev->vendor == PCI_VENDOR_ID_NEC)
 		xhci->quirks |= XHCI_NEC_HOST;
 
@@ -307,8 +303,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
 	}
 
-	if (pdev->vendor == PCI_VENDOR_ID_AMD)
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x43f7)
+		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
 
 	if ((pdev->vendor == PCI_VENDOR_ID_AMD) &&
 		((pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4) ||
@@ -396,12 +392,16 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 			pdev->device == PCI_DEVICE_ID_EJ168) {
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 		xhci->quirks |= XHCI_BROKEN_STREAMS;
 	}
+	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
+			pdev->device == PCI_DEVICE_ID_EJ188) {
+		xhci->quirks |= XHCI_RESET_ON_RESUME;
+		xhci->quirks |= XHCI_BROKEN_STREAMS;
+	}
+
 	if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
 	    pdev->device == 0x0014) {
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 		xhci->quirks |= XHCI_ZERO_64B_REGS;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
@@ -431,7 +431,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
 		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) {
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 		xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
@@ -820,7 +819,6 @@ static int xhci_pci_poweroff_late(struct usb_hcd *hcd, bool do_wakeup)
 	struct xhci_hcd		*xhci = hcd_to_xhci(hcd);
 	struct xhci_port	*port;
 	struct usb_device	*udev;
-	unsigned int		slot_id;
 	u32			portsc;
 	int			i;
 
@@ -843,15 +841,14 @@ static int xhci_pci_poweroff_late(struct usb_hcd *hcd, bool do_wakeup)
 		if ((portsc & PORT_PLS_MASK) != XDEV_U3)
 			continue;
 
-		slot_id = xhci_find_slot_id_by_port(port->rhub->hcd, xhci,
-						    port->hcd_portnum + 1);
-		if (!slot_id || !xhci->devs[slot_id]) {
+		if (!port->slot_id || !xhci->devs[port->slot_id]) {
 			xhci_err(xhci, "No dev for slot_id %d for port %d-%d in U3\n",
-				 slot_id, port->rhub->hcd->self.busnum, port->hcd_portnum + 1);
+				 port->slot_id, port->rhub->hcd->self.busnum,
+				 port->hcd_portnum + 1);
 			continue;
 		}
 
-		udev = xhci->devs[slot_id]->udev;
+		udev = xhci->devs[port->slot_id]->udev;
 
 		/* if wakeup is enabled then don't disable the port */
 		if (udev->do_remote_wakeup && do_wakeup)
diff --git a/drivers/usb/host/xhci-port.h b/drivers/usb/host/xhci-port.h
new file mode 100644
index 0000000000..f19efb966d
--- /dev/null
+++ b/drivers/usb/host/xhci-port.h
@@ -0,0 +1,176 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/* PORTSC - Port Status and Control Register - port_status_base bitmasks */
+/* true: device connected */
+#define PORT_CONNECT	(1 << 0)
+/* true: port enabled */
+#define PORT_PE		(1 << 1)
+/* bit 2 reserved and zeroed */
+/* true: port has an over-current condition */
+#define PORT_OC		(1 << 3)
+/* true: port reset signaling asserted */
+#define PORT_RESET	(1 << 4)
+/* Port Link State - bits 5:8
+ * A read gives the current link PM state of the port,
+ * a write with Link State Write Strobe set sets the link state.
+ */
+#define PORT_PLS_MASK	(0xf << 5)
+#define XDEV_U0		(0x0 << 5)
+#define XDEV_U1		(0x1 << 5)
+#define XDEV_U2		(0x2 << 5)
+#define XDEV_U3		(0x3 << 5)
+#define XDEV_DISABLED	(0x4 << 5)
+#define XDEV_RXDETECT	(0x5 << 5)
+#define XDEV_INACTIVE	(0x6 << 5)
+#define XDEV_POLLING	(0x7 << 5)
+#define XDEV_RECOVERY	(0x8 << 5)
+#define XDEV_HOT_RESET	(0x9 << 5)
+#define XDEV_COMP_MODE	(0xa << 5)
+#define XDEV_TEST_MODE	(0xb << 5)
+#define XDEV_RESUME	(0xf << 5)
+
+/* true: port has power (see HCC_PPC) */
+#define PORT_POWER	(1 << 9)
+/* bits 10:13 indicate device speed:
+ * 0 - undefined speed - port hasn't be initialized by a reset yet
+ * 1 - full speed
+ * 2 - low speed
+ * 3 - high speed
+ * 4 - super speed
+ * 5-15 reserved
+ */
+#define DEV_SPEED_MASK		(0xf << 10)
+#define	XDEV_FS			(0x1 << 10)
+#define	XDEV_LS			(0x2 << 10)
+#define	XDEV_HS			(0x3 << 10)
+#define	XDEV_SS			(0x4 << 10)
+#define	XDEV_SSP		(0x5 << 10)
+#define DEV_UNDEFSPEED(p)	(((p) & DEV_SPEED_MASK) == (0x0<<10))
+#define DEV_FULLSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_FS)
+#define DEV_LOWSPEED(p)		(((p) & DEV_SPEED_MASK) == XDEV_LS)
+#define DEV_HIGHSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_HS)
+#define DEV_SUPERSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_SS)
+#define DEV_SUPERSPEEDPLUS(p)	(((p) & DEV_SPEED_MASK) == XDEV_SSP)
+#define DEV_SUPERSPEED_ANY(p)	(((p) & DEV_SPEED_MASK) >= XDEV_SS)
+#define DEV_PORT_SPEED(p)	(((p) >> 10) & 0x0f)
+
+/* Bits 20:23 in the Slot Context are the speed for the device */
+#define	SLOT_SPEED_FS		(XDEV_FS << 10)
+#define	SLOT_SPEED_LS		(XDEV_LS << 10)
+#define	SLOT_SPEED_HS		(XDEV_HS << 10)
+#define	SLOT_SPEED_SS		(XDEV_SS << 10)
+#define	SLOT_SPEED_SSP		(XDEV_SSP << 10)
+/* Port Indicator Control */
+#define PORT_LED_OFF	(0 << 14)
+#define PORT_LED_AMBER	(1 << 14)
+#define PORT_LED_GREEN	(2 << 14)
+#define PORT_LED_MASK	(3 << 14)
+/* Port Link State Write Strobe - set this when changing link state */
+#define PORT_LINK_STROBE	(1 << 16)
+/* true: connect status change */
+#define PORT_CSC	(1 << 17)
+/* true: port enable change */
+#define PORT_PEC	(1 << 18)
+/* true: warm reset for a USB 3.0 device is done.  A "hot" reset puts the port
+ * into an enabled state, and the device into the default state.  A "warm" reset
+ * also resets the link, forcing the device through the link training sequence.
+ * SW can also look at the Port Reset register to see when warm reset is done.
+ */
+#define PORT_WRC	(1 << 19)
+/* true: over-current change */
+#define PORT_OCC	(1 << 20)
+/* true: reset change - 1 to 0 transition of PORT_RESET */
+#define PORT_RC		(1 << 21)
+/* port link status change - set on some port link state transitions:
+ *  Transition				Reason
+ *  ------------------------------------------------------------------------------
+ *  - U3 to Resume			Wakeup signaling from a device
+ *  - Resume to Recovery to U0		USB 3.0 device resume
+ *  - Resume to U0			USB 2.0 device resume
+ *  - U3 to Recovery to U0		Software resume of USB 3.0 device complete
+ *  - U3 to U0				Software resume of USB 2.0 device complete
+ *  - U2 to U0				L1 resume of USB 2.1 device complete
+ *  - U0 to U0 (???)			L1 entry rejection by USB 2.1 device
+ *  - U0 to disabled			L1 entry error with USB 2.1 device
+ *  - Any state to inactive		Error on USB 3.0 port
+ */
+#define PORT_PLC	(1 << 22)
+/* port configure error change - port failed to configure its link partner */
+#define PORT_CEC	(1 << 23)
+#define PORT_CHANGE_MASK	(PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
+				 PORT_RC | PORT_PLC | PORT_CEC)
+
+
+/* Cold Attach Status - xHC can set this bit to report device attached during
+ * Sx state. Warm port reset should be perfomed to clear this bit and move port
+ * to connected state.
+ */
+#define PORT_CAS	(1 << 24)
+/* wake on connect (enable) */
+#define PORT_WKCONN_E	(1 << 25)
+/* wake on disconnect (enable) */
+#define PORT_WKDISC_E	(1 << 26)
+/* wake on over-current (enable) */
+#define PORT_WKOC_E	(1 << 27)
+/* bits 28:29 reserved */
+/* true: device is non-removable - for USB 3.0 roothub emulation */
+#define PORT_DEV_REMOVE	(1 << 30)
+/* Initiate a warm port reset - complete when PORT_WRC is '1' */
+#define PORT_WR		(1 << 31)
+
+/* We mark duplicate entries with -1 */
+#define DUPLICATE_ENTRY ((u8)(-1))
+
+/* Port Power Management Status and Control - port_power_base bitmasks */
+/* Inactivity timer value for transitions into U1, in microseconds.
+ * Timeout can be up to 127us.  0xFF means an infinite timeout.
+ */
+#define PORT_U1_TIMEOUT(p)	((p) & 0xff)
+#define PORT_U1_TIMEOUT_MASK	0xff
+/* Inactivity timer value for transitions into U2 */
+#define PORT_U2_TIMEOUT(p)	(((p) & 0xff) << 8)
+#define PORT_U2_TIMEOUT_MASK	(0xff << 8)
+/* Bits 24:31 for port testing */
+
+/* USB2 Protocol PORTSPMSC */
+#define	PORT_L1S_MASK		7
+#define	PORT_L1S_SUCCESS	1
+#define	PORT_RWE		(1 << 3)
+#define	PORT_HIRD(p)		(((p) & 0xf) << 4)
+#define	PORT_HIRD_MASK		(0xf << 4)
+#define	PORT_L1DS_MASK		(0xff << 8)
+#define	PORT_L1DS(p)		(((p) & 0xff) << 8)
+#define	PORT_HLE		(1 << 16)
+#define PORT_TEST_MODE_SHIFT	28
+
+/* USB3 Protocol PORTLI  Port Link Information */
+#define PORT_RX_LANES(p)	(((p) >> 16) & 0xf)
+#define PORT_TX_LANES(p)	(((p) >> 20) & 0xf)
+
+/* USB2 Protocol PORTHLPMC */
+#define PORT_HIRDM(p)((p) & 3)
+#define PORT_L1_TIMEOUT(p)(((p) & 0xff) << 2)
+#define PORT_BESLD(p)(((p) & 0xf) << 10)
+
+/* use 512 microseconds as USB2 LPM L1 default timeout. */
+#define XHCI_L1_TIMEOUT		512
+
+/* Set default HIRD/BESL value to 4 (350/400us) for USB2 L1 LPM resume latency.
+ * Safe to use with mixed HIRD and BESL systems (host and device) and is used
+ * by other operating systems.
+ *
+ * XHCI 1.0 errata 8/14/12 Table 13 notes:
+ * "Software should choose xHC BESL/BESLD field values that do not violate a
+ * device's resume latency requirements,
+ * e.g. not program values > '4' if BLC = '1' and a HIRD device is attached,
+ * or not program values < '4' if BLC = '0' and a BESL device is attached.
+ */
+#define XHCI_DEFAULT_BESL	4
+
+/*
+ * USB3 specification define a 360ms tPollingLFPSTiemout for USB3 ports
+ * to complete link training. usually link trainig completes much faster
+ * so check status 10 times with 36ms sleep in places we need to wait for
+ * polling to complete.
+ */
+#define XHCI_PORT_POLLING_LFPS_TIME  36
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
index ab9c5969e4..8b35764772 100644
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -214,8 +214,7 @@ static int xhci_rcar_resume_quirk(struct usb_hcd *hcd)
  */
 #define SET_XHCI_PLAT_PRIV_FOR_RCAR(firmware)				\
 	.firmware_name = firmware,					\
-	.quirks = XHCI_NO_64BIT_SUPPORT | XHCI_TRUST_TX_LENGTH |	\
-		  XHCI_SLOW_SUSPEND,					\
+	.quirks = XHCI_NO_64BIT_SUPPORT |  XHCI_SLOW_SUSPEND,		\
 	.init_quirk = xhci_rcar_init_quirk,				\
 	.plat_start = xhci_rcar_start,					\
 	.resume_quirk = xhci_rcar_resume_quirk,
@@ -229,8 +228,7 @@ static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = {
 };
 
 static const struct xhci_plat_priv xhci_plat_renesas_rzv2m = {
-	.quirks = XHCI_NO_64BIT_SUPPORT | XHCI_TRUST_TX_LENGTH |
-		  XHCI_SLOW_SUSPEND,
+	.quirks = XHCI_NO_64BIT_SUPPORT | XHCI_SLOW_SUSPEND,
 	.init_quirk = xhci_rzv2m_init_quirk,
 	.plat_start = xhci_rzv2m_start,
 };
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index b2868217de..48d745e9f9 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -113,6 +113,12 @@ static bool last_td_in_urb(struct xhci_td *td)
 	return urb_priv->num_tds_done == urb_priv->num_tds;
 }
 
+static bool unhandled_event_trb(struct xhci_ring *ring)
+{
+	return ((le32_to_cpu(ring->dequeue->event_cmd.flags) & TRB_CYCLE) ==
+		ring->cycle_state);
+}
+
 static void inc_td_cnt(struct urb *urb)
 {
 	struct urb_priv *urb_priv = urb->hcpriv;
@@ -1028,13 +1034,27 @@ static int xhci_invalidate_cancelled_tds(struct xhci_virt_ep *ep)
 				break;
 			case TD_DIRTY: /* TD is cached, clear it */
 			case TD_HALTED:
+			case TD_CLEARING_CACHE_DEFERRED:
+				if (cached_td) {
+					if (cached_td->urb->stream_id != td->urb->stream_id) {
+						/* Multiple streams case, defer move dq */
+						xhci_dbg(xhci,
+							 "Move dq deferred: stream %u URB %p\n",
+							 td->urb->stream_id, td->urb);
+						td->cancel_status = TD_CLEARING_CACHE_DEFERRED;
+						break;
+					}
+
+					/* Should never happen, but clear the TD if it does */
+					xhci_warn(xhci,
+						  "Found multiple active URBs %p and %p in stream %u?\n",
+						  td->urb, cached_td->urb,
+						  td->urb->stream_id);
+					td_to_noop(xhci, ring, cached_td, false);
+					cached_td->cancel_status = TD_CLEARED;
+				}
+
 				td->cancel_status = TD_CLEARING_CACHE;
-				if (cached_td)
-					/* FIXME  stream case, several stopped rings */
-					xhci_dbg(xhci,
-						 "Move dq past stream %u URB %p instead of stream %u URB %p\n",
-						 td->urb->stream_id, td->urb,
-						 cached_td->urb->stream_id, cached_td->urb);
 				cached_td = td;
 				break;
 			}
@@ -1054,10 +1074,16 @@ static int xhci_invalidate_cancelled_tds(struct xhci_virt_ep *ep)
 	if (err) {
 		/* Failed to move past cached td, just set cached TDs to no-op */
 		list_for_each_entry_safe(td, tmp_td, &ep->cancelled_td_list, cancelled_td_list) {
-			if (td->cancel_status != TD_CLEARING_CACHE)
+			/*
+			 * Deferred TDs need to have the deq pointer set after the above command
+			 * completes, so if that failed we just give up on all of them (and
+			 * complain loudly since this could cause issues due to caching).
+			 */
+			if (td->cancel_status != TD_CLEARING_CACHE &&
+			    td->cancel_status != TD_CLEARING_CACHE_DEFERRED)
 				continue;
-			xhci_dbg(xhci, "Failed to clear cancelled cached URB %p, mark clear anyway\n",
-				 td->urb);
+			xhci_warn(xhci, "Failed to clear cancelled cached URB %p, mark clear anyway\n",
+				  td->urb);
 			td_to_noop(xhci, ring, td, false);
 			td->cancel_status = TD_CLEARED;
 		}
@@ -1154,6 +1180,15 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
 				break;
 			ep->ep_state &= ~EP_STOP_CMD_PENDING;
 			return;
+		case EP_STATE_STOPPED:
+			/*
+			 * NEC uPD720200 sometimes sets this state and fails with
+			 * Context Error while continuing to process TRBs.
+			 * Be conservative and trust EP_CTX_STATE on other chips.
+			 */
+			if (!(xhci->quirks & XHCI_NEC_HOST))
+				break;
+			fallthrough;
 		case EP_STATE_RUNNING:
 			/* Race, HW handled stop ep cmd before ep was running */
 			xhci_dbg(xhci, "Stop ep completion ctx error, ep is running\n");
@@ -1335,6 +1370,7 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id,
 	struct xhci_ep_ctx *ep_ctx;
 	struct xhci_slot_ctx *slot_ctx;
 	struct xhci_td *td, *tmp_td;
+	bool deferred = false;
 
 	ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
 	stream_id = TRB_TO_STREAM_ID(le32_to_cpu(trb->generic.field[2]));
@@ -1421,6 +1457,8 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id,
 			xhci_dbg(ep->xhci, "%s: Giveback cancelled URB %p TD\n",
 				 __func__, td->urb);
 			xhci_td_cleanup(ep->xhci, td, ep_ring, td->status);
+		} else if (td->cancel_status == TD_CLEARING_CACHE_DEFERRED) {
+			deferred = true;
 		} else {
 			xhci_dbg(ep->xhci, "%s: Keep cancelled URB %p TD as cancel_status is %d\n",
 				 __func__, td->urb, td->cancel_status);
@@ -1430,8 +1468,17 @@ cleanup:
 	ep->ep_state &= ~SET_DEQ_PENDING;
 	ep->queued_deq_seg = NULL;
 	ep->queued_deq_ptr = NULL;
-	/* Restart any rings with pending URBs */
-	ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
+
+	if (deferred) {
+		/* We have more streams to clear */
+		xhci_dbg(ep->xhci, "%s: Pending TDs to clear, continuing with invalidation\n",
+			 __func__);
+		xhci_invalidate_cancelled_tds(ep);
+	} else {
+		/* Restart any rings with pending URBs */
+		xhci_dbg(ep->xhci, "%s: All TDs cleared, ring doorbell\n", __func__);
+		ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
+	}
 }
 
 static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id,
@@ -1870,7 +1917,6 @@ static void handle_port_status(struct xhci_hcd *xhci,
 	u32 port_id;
 	u32 portsc, cmd_reg;
 	int max_ports;
-	int slot_id;
 	unsigned int hcd_portnum;
 	struct xhci_bus_state *bus_state;
 	bool bogus_port_status = false;
@@ -1922,9 +1968,8 @@ static void handle_port_status(struct xhci_hcd *xhci,
 
 	if (hcd->speed >= HCD_USB3 &&
 	    (portsc & PORT_PLS_MASK) == XDEV_INACTIVE) {
-		slot_id = xhci_find_slot_id_by_port(hcd, xhci, hcd_portnum + 1);
-		if (slot_id && xhci->devs[slot_id])
-			xhci->devs[slot_id]->flags |= VDEV_PORT_ERROR;
+		if (port->slot_id && xhci->devs[port->slot_id])
+			xhci->devs[port->slot_id]->flags |= VDEV_PORT_ERROR;
 	}
 
 	if ((portsc & PORT_PLC) && (portsc & PORT_PLS_MASK) == XDEV_RESUME) {
@@ -1982,9 +2027,8 @@ static void handle_port_status(struct xhci_hcd *xhci,
 		 * so the roothub behavior is consistent with external
 		 * USB 3.0 hub behavior.
 		 */
-		slot_id = xhci_find_slot_id_by_port(hcd, xhci, hcd_portnum + 1);
-		if (slot_id && xhci->devs[slot_id])
-			xhci_ring_device(xhci, slot_id);
+		if (port->slot_id && xhci->devs[port->slot_id])
+			xhci_ring_device(xhci, port->slot_id);
 		if (bus_state->port_remote_wakeup & (1 << hcd_portnum)) {
 			xhci_test_and_clear_bit(xhci, port, PORT_PLC);
 			usb_wakeup_notification(hcd->self.root_hub,
@@ -2387,8 +2431,7 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
 			break;
 		if (remaining) {
 			frame->status = short_framestatus;
-			if (xhci->quirks & XHCI_TRUST_TX_LENGTH)
-				sum_trbs_for_length = true;
+			sum_trbs_for_length = true;
 			break;
 		}
 		frame->status = 0;
@@ -2523,9 +2566,8 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
 		goto finish_td;
 	case COMP_STOPPED_LENGTH_INVALID:
 		/* stopped on ep trb with invalid length, exclude it */
-		ep_trb_len	= 0;
-		remaining	= 0;
-		break;
+		td->urb->actual_length = sum_trb_lengths(xhci, ep_ring, ep_trb);
+		goto finish_td;
 	case COMP_USB_TRANSACTION_ERROR:
 		if (xhci->quirks & XHCI_NO_SOFT_RETRY ||
 		    (ep->err_count++ > MAX_SOFT_RETRY) ||
@@ -2638,15 +2680,11 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 	 * transfer type
 	 */
 	case COMP_SUCCESS:
-		if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
-			break;
-		if (xhci->quirks & XHCI_TRUST_TX_LENGTH ||
-		    ep_ring->last_td_was_short)
+		if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
 			trb_comp_code = COMP_SHORT_PACKET;
-		else
-			xhci_warn_ratelimited(xhci,
-					      "WARN Successful completion on short TX for slot %u ep %u: needs XHCI_TRUST_TX_LENGTH quirk?\n",
-					      slot_id, ep_index);
+			xhci_dbg(xhci, "Successful completion on short TX for slot %u ep %u with last td short %d\n",
+				 slot_id, ep_index, ep_ring->last_td_was_short);
+		}
 		break;
 	case COMP_SHORT_PACKET:
 		break;
@@ -2816,7 +2854,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 			td_num--;
 
 		/* Is this a TRB in the currently executing TD? */
-		ep_seg = trb_in_td(xhci, ep_ring->deq_seg, ep_ring->dequeue,
+		ep_seg = trb_in_td(xhci, td->start_seg, td->first_trb,
 				td->last_trb, ep_trb_dma, false);
 
 		/*
@@ -2884,9 +2922,8 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 					"part of current TD ep_index %d "
 					"comp_code %u\n", ep_index,
 					trb_comp_code);
-				trb_in_td(xhci, ep_ring->deq_seg,
-					  ep_ring->dequeue, td->last_trb,
-					  ep_trb_dma, true);
+				trb_in_td(xhci, td->start_seg, td->first_trb,
+					  td->last_trb, ep_trb_dma, true);
 				return -ESHUTDOWN;
 			}
 		}
@@ -2962,32 +2999,18 @@ err_out:
 }
 
 /*
- * This function handles all OS-owned events on the event ring.  It may drop
+ * This function handles one OS-owned event on the event ring. It may drop
  * xhci->lock between event processing (e.g. to pass up port status changes).
- * Returns >0 for "possibly more events to process" (caller should call again),
- * otherwise 0 if done.  In future, <0 returns should indicate error code.
  */
-static int xhci_handle_event(struct xhci_hcd *xhci, struct xhci_interrupter *ir)
+static int xhci_handle_event_trb(struct xhci_hcd *xhci, struct xhci_interrupter *ir,
+				 union xhci_trb *event)
 {
-	union xhci_trb *event;
 	u32 trb_type;
 
-	/* Event ring hasn't been allocated yet. */
-	if (!ir || !ir->event_ring || !ir->event_ring->dequeue) {
-		xhci_err(xhci, "ERROR interrupter not ready\n");
-		return -ENOMEM;
-	}
-
-	event = ir->event_ring->dequeue;
-	/* Does the HC or OS own the TRB? */
-	if ((le32_to_cpu(event->event_cmd.flags) & TRB_CYCLE) !=
-	    ir->event_ring->cycle_state)
-		return 0;
-
 	trace_xhci_handle_event(ir->event_ring, &event->generic);
 
 	/*
-	 * Barrier between reading the TRB_CYCLE (valid) flag above and any
+	 * Barrier between reading the TRB_CYCLE (valid) flag before, and any
 	 * speculative reads of the event's flags/data below.
 	 */
 	rmb();
@@ -3017,15 +3040,11 @@ static int xhci_handle_event(struct xhci_hcd *xhci, struct xhci_interrupter *ir)
 	 * to make sure a watchdog timer didn't mark the host as non-responsive.
 	 */
 	if (xhci->xhc_state & XHCI_STATE_DYING) {
-		xhci_dbg(xhci, "xHCI host dying, returning from "
-				"event handler.\n");
-		return 0;
+		xhci_dbg(xhci, "xHCI host dying, returning from event handler.\n");
+		return -ENODEV;
 	}
 
-	/* Are there more items on the event ring?  Caller will call us again to
-	 * check.
-	 */
-	return 1;
+	return 0;
 }
 
 /*
@@ -3075,13 +3094,24 @@ static void xhci_clear_interrupt_pending(struct xhci_hcd *xhci,
 	}
 }
 
+/*
+ * Handle all OS-owned events on an interrupter event ring. It may drop
+ * and reaquire xhci->lock between event processing.
+ */
 static int xhci_handle_events(struct xhci_hcd *xhci, struct xhci_interrupter *ir)
 {
 	int event_loop = 0;
+	int err;
 	u64 temp;
 
 	xhci_clear_interrupt_pending(xhci, ir);
 
+	/* Event ring hasn't been allocated yet. */
+	if (!ir->event_ring || !ir->event_ring->dequeue) {
+		xhci_err(xhci, "ERROR interrupter event ring not ready\n");
+		return -ENOMEM;
+	}
+
 	if (xhci->xhc_state & XHCI_STATE_DYING ||
 	    xhci->xhc_state & XHCI_STATE_HALTED) {
 		xhci_dbg(xhci, "xHCI dying, ignoring interrupt. Shouldn't IRQs be disabled?\n");
@@ -3092,7 +3122,10 @@ static int xhci_handle_events(struct xhci_hcd *xhci, struct xhci_interrupter *ir
 		return -ENODEV;
 	}
 
-	while (xhci_handle_event(xhci, ir) > 0) {
+	/* Process all OS owned event TRBs on this event ring */
+	while (unhandled_event_trb(ir->event_ring)) {
+		err = xhci_handle_event_trb(xhci, ir, ir->event_ring->dequeue);
+
 		/*
 		 * If half a segment of events have been handled in one go then
 		 * update ERDP, and force isoc trbs to interrupt more often
@@ -3108,6 +3141,9 @@ static int xhci_handle_events(struct xhci_hcd *xhci, struct xhci_interrupter *ir
 
 		/* Update SW event ring dequeue pointer */
 		inc_deq(xhci, ir->event_ring);
+
+		if (err)
+			break;
 	}
 
 	xhci_update_erst_dequeue(xhci, ir, true);
diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h
index ac47b1c054..5762564b9d 100644
--- a/drivers/usb/host/xhci-trace.h
+++ b/drivers/usb/host/xhci-trace.h
@@ -172,8 +172,7 @@ DECLARE_EVENT_CLASS(xhci_log_free_virt_dev,
 		__field(void *, vdev)
 		__field(unsigned long long, out_ctx)
 		__field(unsigned long long, in_ctx)
-		__field(u8, fake_port)
-		__field(u8, real_port)
+		__field(int, slot_id)
 		__field(u16, current_mel)
 
 	),
@@ -181,13 +180,12 @@ DECLARE_EVENT_CLASS(xhci_log_free_virt_dev,
 		__entry->vdev = vdev;
 		__entry->in_ctx = (unsigned long long) vdev->in_ctx->dma;
 		__entry->out_ctx = (unsigned long long) vdev->out_ctx->dma;
-		__entry->fake_port = (u8) vdev->fake_port;
-		__entry->real_port = (u8) vdev->real_port;
+		__entry->slot_id = (int) vdev->slot_id;
 		__entry->current_mel = (u16) vdev->current_mel;
 		),
-	TP_printk("vdev %p ctx %llx | %llx fake_port %d real_port %d current_mel %d",
-		__entry->vdev, __entry->in_ctx, __entry->out_ctx,
-		__entry->fake_port, __entry->real_port, __entry->current_mel
+	TP_printk("vdev %p slot %d ctx %llx | %llx current_mel %d",
+		__entry->vdev, __entry->slot_id, __entry->in_ctx,
+		__entry->out_ctx, __entry->current_mel
 	)
 );
 
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index afccd58c9a..8579603eda 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -346,6 +346,23 @@ static int xhci_disable_interrupter(struct xhci_interrupter *ir)
 	return 0;
 }
 
+/* interrupt moderation interval imod_interval in nanoseconds */
+static int xhci_set_interrupter_moderation(struct xhci_interrupter *ir,
+					   u32 imod_interval)
+{
+	u32 imod;
+
+	if (!ir || !ir->ir_set || imod_interval > U16_MAX * 250)
+		return -EINVAL;
+
+	imod = readl(&ir->ir_set->irq_control);
+	imod &= ~ER_IRQ_INTERVAL_MASK;
+	imod |= (imod_interval / 250) & ER_IRQ_INTERVAL_MASK;
+	writel(imod, &ir->ir_set->irq_control);
+
+	return 0;
+}
+
 static void compliance_mode_recovery(struct timer_list *t)
 {
 	struct xhci_hcd *xhci;
@@ -528,7 +545,6 @@ static int xhci_run_finished(struct xhci_hcd *xhci)
  */
 int xhci_run(struct usb_hcd *hcd)
 {
-	u32 temp;
 	u64 temp_64;
 	int ret;
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
@@ -551,12 +567,7 @@ int xhci_run(struct usb_hcd *hcd)
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
 			"ERST deq = 64'h%0lx", (long unsigned int) temp_64);
 
-	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
-			"// Set the interrupt modulation register");
-	temp = readl(&ir->ir_set->irq_control);
-	temp &= ~ER_IRQ_INTERVAL_MASK;
-	temp |= (xhci->imod_interval / 250) & ER_IRQ_INTERVAL_MASK;
-	writel(temp, &ir->ir_set->irq_control);
+	xhci_set_interrupter_moderation(ir, xhci->imod_interval);
 
 	if (xhci->quirks & XHCI_NEC_HOST) {
 		struct xhci_command *command;
@@ -783,19 +794,7 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci)
 		seg = seg->next;
 	} while (seg != ring->deq_seg);
 
-	/* Reset the software enqueue and dequeue pointers */
-	ring->deq_seg = ring->first_seg;
-	ring->dequeue = ring->first_seg->trbs;
-	ring->enq_seg = ring->deq_seg;
-	ring->enqueue = ring->dequeue;
-
-	ring->num_trbs_free = ring->num_segs * (TRBS_PER_SEGMENT - 1) - 1;
-	/*
-	 * Ring is now zeroed, so the HW should look for change of ownership
-	 * when the cycle bit is set to 1.
-	 */
-	ring->cycle_state = 1;
-
+	xhci_initialize_ring_info(ring, 1);
 	/*
 	 * Reset the hardware dequeue pointer.
 	 * Yes, this will need to be re-written after resume, but we're paranoid
@@ -2264,7 +2263,7 @@ static int xhci_check_tt_bw_table(struct xhci_hcd *xhci,
 	struct xhci_tt_bw_info *tt_info;
 
 	/* Find the bandwidth table for the root port this TT is attached to. */
-	bw_table = &xhci->rh_bw[virt_dev->real_port - 1].bw_table;
+	bw_table = &xhci->rh_bw[virt_dev->rhub_port->hw_portnum].bw_table;
 	tt_info = virt_dev->tt_info;
 	/* If this TT already had active endpoints, the bandwidth for this TT
 	 * has already been added.  Removing all periodic endpoints (and thus
@@ -2382,7 +2381,7 @@ static int xhci_check_bw_table(struct xhci_hcd *xhci,
 	if (virt_dev->tt_info) {
 		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
 				"Recalculating BW for rootport %u",
-				virt_dev->real_port);
+				virt_dev->rhub_port->hw_portnum + 1);
 		if (xhci_check_tt_bw_table(xhci, virt_dev, old_active_eps)) {
 			xhci_warn(xhci, "Not enough bandwidth on HS bus for "
 					"newly activated TT.\n");
@@ -2395,7 +2394,7 @@ static int xhci_check_bw_table(struct xhci_hcd *xhci,
 	} else {
 		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
 				"Recalculating BW for rootport %u",
-				virt_dev->real_port);
+				virt_dev->rhub_port->hw_portnum + 1);
 	}
 
 	/* Add in how much bandwidth will be used for interval zero, or the
@@ -2492,14 +2491,12 @@ static int xhci_check_bw_table(struct xhci_hcd *xhci,
 		bw_used += overhead + packet_size;
 
 	if (!virt_dev->tt_info && virt_dev->udev->speed == USB_SPEED_HIGH) {
-		unsigned int port_index = virt_dev->real_port - 1;
-
 		/* OK, we're manipulating a HS device attached to a
 		 * root port bandwidth domain.  Include the number of active TTs
 		 * in the bandwidth used.
 		 */
 		bw_used += TT_HS_OVERHEAD *
-			xhci->rh_bw[port_index].num_active_tts;
+			xhci->rh_bw[virt_dev->rhub_port->hw_portnum].num_active_tts;
 	}
 
 	xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
@@ -2686,7 +2683,7 @@ void xhci_update_tt_active_eps(struct xhci_hcd *xhci,
 	if (!virt_dev->tt_info)
 		return;
 
-	rh_bw_info = &xhci->rh_bw[virt_dev->real_port - 1];
+	rh_bw_info = &xhci->rh_bw[virt_dev->rhub_port->hw_portnum];
 	if (old_active_eps == 0 &&
 				virt_dev->tt_info->active_eps != 0) {
 		rh_bw_info->num_active_tts += 1;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index bf05103aa6..1683d779e4 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -22,6 +22,9 @@
 #include	"xhci-ext-caps.h"
 #include "pci-quirks.h"
 
+#include "xhci-port.h"
+#include "xhci-caps.h"
+
 /* max buffer size for trace and debug messages */
 #define XHCI_MSG_MAX		500
 
@@ -62,90 +65,6 @@ struct xhci_cap_regs {
 	/* Reserved up to (CAPLENGTH - 0x1C) */
 };
 
-/* hc_capbase bitmasks */
-/* bits 7:0 - how long is the Capabilities register */
-#define HC_LENGTH(p)		XHCI_HC_LENGTH(p)
-/* bits 31:16	*/
-#define HC_VERSION(p)		(((p) >> 16) & 0xffff)
-
-/* HCSPARAMS1 - hcs_params1 - bitmasks */
-/* bits 0:7, Max Device Slots */
-#define HCS_MAX_SLOTS(p)	(((p) >> 0) & 0xff)
-#define HCS_SLOTS_MASK		0xff
-/* bits 8:18, Max Interrupters */
-#define HCS_MAX_INTRS(p)	(((p) >> 8) & 0x7ff)
-/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */
-#define HCS_MAX_PORTS(p)	(((p) >> 24) & 0x7f)
-
-/* HCSPARAMS2 - hcs_params2 - bitmasks */
-/* bits 0:3, frames or uframes that SW needs to queue transactions
- * ahead of the HW to meet periodic deadlines */
-#define HCS_IST(p)		(((p) >> 0) & 0xf)
-/* bits 4:7, max number of Event Ring segments */
-#define HCS_ERST_MAX(p)		(((p) >> 4) & 0xf)
-/* bits 21:25 Hi 5 bits of Scratchpad buffers SW must allocate for the HW */
-/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
-/* bits 27:31 Lo 5 bits of Scratchpad buffers SW must allocate for the HW */
-#define HCS_MAX_SCRATCHPAD(p)   ((((p) >> 16) & 0x3e0) | (((p) >> 27) & 0x1f))
-
-/* HCSPARAMS3 - hcs_params3 - bitmasks */
-/* bits 0:7, Max U1 to U0 latency for the roothub ports */
-#define HCS_U1_LATENCY(p)	(((p) >> 0) & 0xff)
-/* bits 16:31, Max U2 to U0 latency for the roothub ports */
-#define HCS_U2_LATENCY(p)	(((p) >> 16) & 0xffff)
-
-/* HCCPARAMS - hcc_params - bitmasks */
-/* true: HC can use 64-bit address pointers */
-#define HCC_64BIT_ADDR(p)	((p) & (1 << 0))
-/* true: HC can do bandwidth negotiation */
-#define HCC_BANDWIDTH_NEG(p)	((p) & (1 << 1))
-/* true: HC uses 64-byte Device Context structures
- * FIXME 64-byte context structures aren't supported yet.
- */
-#define HCC_64BYTE_CONTEXT(p)	((p) & (1 << 2))
-/* true: HC has port power switches */
-#define HCC_PPC(p)		((p) & (1 << 3))
-/* true: HC has port indicators */
-#define HCS_INDICATOR(p)	((p) & (1 << 4))
-/* true: HC has Light HC Reset Capability */
-#define HCC_LIGHT_RESET(p)	((p) & (1 << 5))
-/* true: HC supports latency tolerance messaging */
-#define HCC_LTC(p)		((p) & (1 << 6))
-/* true: no secondary Stream ID Support */
-#define HCC_NSS(p)		((p) & (1 << 7))
-/* true: HC supports Stopped - Short Packet */
-#define HCC_SPC(p)		((p) & (1 << 9))
-/* true: HC has Contiguous Frame ID Capability */
-#define HCC_CFC(p)		((p) & (1 << 11))
-/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */
-#define HCC_MAX_PSA(p)		(1 << ((((p) >> 12) & 0xf) + 1))
-/* Extended Capabilities pointer from PCI base - section 5.3.6 */
-#define HCC_EXT_CAPS(p)		XHCI_HCC_EXT_CAPS(p)
-
-#define CTX_SIZE(_hcc)		(HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
-
-/* db_off bitmask - bits 0:1 reserved */
-#define	DBOFF_MASK	(~0x3)
-
-/* run_regs_off bitmask - bits 0:4 reserved */
-#define	RTSOFF_MASK	(~0x1f)
-
-/* HCCPARAMS2 - hcc_params2 - bitmasks */
-/* true: HC supports U3 entry Capability */
-#define	HCC2_U3C(p)		((p) & (1 << 0))
-/* true: HC supports Configure endpoint command Max exit latency too large */
-#define	HCC2_CMC(p)		((p) & (1 << 1))
-/* true: HC supports Force Save context Capability */
-#define	HCC2_FSC(p)		((p) & (1 << 2))
-/* true: HC supports Compliance Transition Capability */
-#define	HCC2_CTC(p)		((p) & (1 << 3))
-/* true: HC support Large ESIT payload Capability > 48k */
-#define	HCC2_LEC(p)		((p) & (1 << 4))
-/* true: HC support Configuration Information Capability */
-#define	HCC2_CIC(p)		((p) & (1 << 5))
-/* true: HC support Extended TBC Capability, Isoc burst count > 65535 */
-#define	HCC2_ETC(p)		((p) & (1 << 6))
-
 /* Number of registers per port */
 #define	NUM_PORT_REGS	4
 
@@ -291,181 +210,6 @@ struct xhci_op_regs {
 #define CONFIG_CIE		(1 << 9)
 /* bits 10:31 - reserved and should be preserved */
 
-/* PORTSC - Port Status and Control Register - port_status_base bitmasks */
-/* true: device connected */
-#define PORT_CONNECT	(1 << 0)
-/* true: port enabled */
-#define PORT_PE		(1 << 1)
-/* bit 2 reserved and zeroed */
-/* true: port has an over-current condition */
-#define PORT_OC		(1 << 3)
-/* true: port reset signaling asserted */
-#define PORT_RESET	(1 << 4)
-/* Port Link State - bits 5:8
- * A read gives the current link PM state of the port,
- * a write with Link State Write Strobe set sets the link state.
- */
-#define PORT_PLS_MASK	(0xf << 5)
-#define XDEV_U0		(0x0 << 5)
-#define XDEV_U1		(0x1 << 5)
-#define XDEV_U2		(0x2 << 5)
-#define XDEV_U3		(0x3 << 5)
-#define XDEV_DISABLED	(0x4 << 5)
-#define XDEV_RXDETECT	(0x5 << 5)
-#define XDEV_INACTIVE	(0x6 << 5)
-#define XDEV_POLLING	(0x7 << 5)
-#define XDEV_RECOVERY	(0x8 << 5)
-#define XDEV_HOT_RESET	(0x9 << 5)
-#define XDEV_COMP_MODE	(0xa << 5)
-#define XDEV_TEST_MODE	(0xb << 5)
-#define XDEV_RESUME	(0xf << 5)
-
-/* true: port has power (see HCC_PPC) */
-#define PORT_POWER	(1 << 9)
-/* bits 10:13 indicate device speed:
- * 0 - undefined speed - port hasn't be initialized by a reset yet
- * 1 - full speed
- * 2 - low speed
- * 3 - high speed
- * 4 - super speed
- * 5-15 reserved
- */
-#define DEV_SPEED_MASK		(0xf << 10)
-#define	XDEV_FS			(0x1 << 10)
-#define	XDEV_LS			(0x2 << 10)
-#define	XDEV_HS			(0x3 << 10)
-#define	XDEV_SS			(0x4 << 10)
-#define	XDEV_SSP		(0x5 << 10)
-#define DEV_UNDEFSPEED(p)	(((p) & DEV_SPEED_MASK) == (0x0<<10))
-#define DEV_FULLSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_FS)
-#define DEV_LOWSPEED(p)		(((p) & DEV_SPEED_MASK) == XDEV_LS)
-#define DEV_HIGHSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_HS)
-#define DEV_SUPERSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_SS)
-#define DEV_SUPERSPEEDPLUS(p)	(((p) & DEV_SPEED_MASK) == XDEV_SSP)
-#define DEV_SUPERSPEED_ANY(p)	(((p) & DEV_SPEED_MASK) >= XDEV_SS)
-#define DEV_PORT_SPEED(p)	(((p) >> 10) & 0x0f)
-
-/* Bits 20:23 in the Slot Context are the speed for the device */
-#define	SLOT_SPEED_FS		(XDEV_FS << 10)
-#define	SLOT_SPEED_LS		(XDEV_LS << 10)
-#define	SLOT_SPEED_HS		(XDEV_HS << 10)
-#define	SLOT_SPEED_SS		(XDEV_SS << 10)
-#define	SLOT_SPEED_SSP		(XDEV_SSP << 10)
-/* Port Indicator Control */
-#define PORT_LED_OFF	(0 << 14)
-#define PORT_LED_AMBER	(1 << 14)
-#define PORT_LED_GREEN	(2 << 14)
-#define PORT_LED_MASK	(3 << 14)
-/* Port Link State Write Strobe - set this when changing link state */
-#define PORT_LINK_STROBE	(1 << 16)
-/* true: connect status change */
-#define PORT_CSC	(1 << 17)
-/* true: port enable change */
-#define PORT_PEC	(1 << 18)
-/* true: warm reset for a USB 3.0 device is done.  A "hot" reset puts the port
- * into an enabled state, and the device into the default state.  A "warm" reset
- * also resets the link, forcing the device through the link training sequence.
- * SW can also look at the Port Reset register to see when warm reset is done.
- */
-#define PORT_WRC	(1 << 19)
-/* true: over-current change */
-#define PORT_OCC	(1 << 20)
-/* true: reset change - 1 to 0 transition of PORT_RESET */
-#define PORT_RC		(1 << 21)
-/* port link status change - set on some port link state transitions:
- *  Transition				Reason
- *  ------------------------------------------------------------------------------
- *  - U3 to Resume			Wakeup signaling from a device
- *  - Resume to Recovery to U0		USB 3.0 device resume
- *  - Resume to U0			USB 2.0 device resume
- *  - U3 to Recovery to U0		Software resume of USB 3.0 device complete
- *  - U3 to U0				Software resume of USB 2.0 device complete
- *  - U2 to U0				L1 resume of USB 2.1 device complete
- *  - U0 to U0 (???)			L1 entry rejection by USB 2.1 device
- *  - U0 to disabled			L1 entry error with USB 2.1 device
- *  - Any state to inactive		Error on USB 3.0 port
- */
-#define PORT_PLC	(1 << 22)
-/* port configure error change - port failed to configure its link partner */
-#define PORT_CEC	(1 << 23)
-#define PORT_CHANGE_MASK	(PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
-				 PORT_RC | PORT_PLC | PORT_CEC)
-
-
-/* Cold Attach Status - xHC can set this bit to report device attached during
- * Sx state. Warm port reset should be perfomed to clear this bit and move port
- * to connected state.
- */
-#define PORT_CAS	(1 << 24)
-/* wake on connect (enable) */
-#define PORT_WKCONN_E	(1 << 25)
-/* wake on disconnect (enable) */
-#define PORT_WKDISC_E	(1 << 26)
-/* wake on over-current (enable) */
-#define PORT_WKOC_E	(1 << 27)
-/* bits 28:29 reserved */
-/* true: device is non-removable - for USB 3.0 roothub emulation */
-#define PORT_DEV_REMOVE	(1 << 30)
-/* Initiate a warm port reset - complete when PORT_WRC is '1' */
-#define PORT_WR		(1 << 31)
-
-/* We mark duplicate entries with -1 */
-#define DUPLICATE_ENTRY ((u8)(-1))
-
-/* Port Power Management Status and Control - port_power_base bitmasks */
-/* Inactivity timer value for transitions into U1, in microseconds.
- * Timeout can be up to 127us.  0xFF means an infinite timeout.
- */
-#define PORT_U1_TIMEOUT(p)	((p) & 0xff)
-#define PORT_U1_TIMEOUT_MASK	0xff
-/* Inactivity timer value for transitions into U2 */
-#define PORT_U2_TIMEOUT(p)	(((p) & 0xff) << 8)
-#define PORT_U2_TIMEOUT_MASK	(0xff << 8)
-/* Bits 24:31 for port testing */
-
-/* USB2 Protocol PORTSPMSC */
-#define	PORT_L1S_MASK		7
-#define	PORT_L1S_SUCCESS	1
-#define	PORT_RWE		(1 << 3)
-#define	PORT_HIRD(p)		(((p) & 0xf) << 4)
-#define	PORT_HIRD_MASK		(0xf << 4)
-#define	PORT_L1DS_MASK		(0xff << 8)
-#define	PORT_L1DS(p)		(((p) & 0xff) << 8)
-#define	PORT_HLE		(1 << 16)
-#define PORT_TEST_MODE_SHIFT	28
-
-/* USB3 Protocol PORTLI  Port Link Information */
-#define PORT_RX_LANES(p)	(((p) >> 16) & 0xf)
-#define PORT_TX_LANES(p)	(((p) >> 20) & 0xf)
-
-/* USB2 Protocol PORTHLPMC */
-#define PORT_HIRDM(p)((p) & 3)
-#define PORT_L1_TIMEOUT(p)(((p) & 0xff) << 2)
-#define PORT_BESLD(p)(((p) & 0xf) << 10)
-
-/* use 512 microseconds as USB2 LPM L1 default timeout. */
-#define XHCI_L1_TIMEOUT		512
-
-/* Set default HIRD/BESL value to 4 (350/400us) for USB2 L1 LPM resume latency.
- * Safe to use with mixed HIRD and BESL systems (host and device) and is used
- * by other operating systems.
- *
- * XHCI 1.0 errata 8/14/12 Table 13 notes:
- * "Software should choose xHC BESL/BESLD field values that do not violate a
- * device's resume latency requirements,
- * e.g. not program values > '4' if BLC = '1' and a HIRD device is attached,
- * or not program values < '4' if BLC = '0' and a BESL device is attached.
- */
-#define XHCI_DEFAULT_BESL	4
-
-/*
- * USB3 specification define a 360ms tPollingLFPSTiemout for USB3 ports
- * to complete link training. usually link trainig completes much faster
- * so check status 10 times with 36ms sleep in places we need to wait for
- * polling to complete.
- */
-#define XHCI_PORT_POLLING_LFPS_TIME  36
-
 /**
  * struct xhci_intr_reg - Interrupt Register Set
  * @irq_pending:	IMAN - Interrupt Management Register.  Used to enable
@@ -995,8 +739,7 @@ struct xhci_virt_device {
 	/* Used for addressing devices and configuration changes */
 	struct xhci_container_ctx       *in_ctx;
 	struct xhci_virt_ep		eps[EP_CTX_PER_DEV];
-	u8				fake_port;
-	u8				real_port;
+	struct xhci_port		*rhub_port;
 	struct xhci_interval_bw_table	*bw_table;
 	struct xhci_tt_bw_info		*tt_info;
 	/*
@@ -1533,6 +1276,7 @@ enum xhci_cancelled_td_status {
 	TD_DIRTY = 0,
 	TD_HALTED,
 	TD_CLEARING_CACHE,
+	TD_CLEARING_CACHE_DEFERRED,
 	TD_CLEARED,
 };
 
@@ -1649,8 +1393,8 @@ struct urb_priv {
 	struct	xhci_td	td[] __counted_by(num_tds);
 };
 
-/* Reasonable limit for number of Event Ring segments (spec allows 32k) */
-#define	ERST_MAX_SEGS	2
+/* Number of Event Ring segments to allocate, when amount is not specified. (spec allows 32k) */
+#define	ERST_DEFAULT_SEGS	2
 /* Poll every 60 seconds */
 #define	POLL_TIMEOUT	60
 /* Stop endpoint command timeout (secs) for URB cancellation watchdog timer */
@@ -1719,6 +1463,8 @@ struct xhci_port {
 	unsigned int		lpm_incapable:1;
 	unsigned long		resume_timestamp;
 	bool			rexit_active;
+	/* Slot ID is the index of the device directly connected to the port */
+	int			slot_id;
 	struct completion	rexit_done;
 	struct completion	u3exit_done;
 };
@@ -1844,7 +1590,7 @@ struct xhci_hcd {
 #define XHCI_RESET_ON_RESUME	BIT_ULL(7)
 #define	XHCI_SW_BW_CHECKING	BIT_ULL(8)
 #define XHCI_AMD_0x96_HOST	BIT_ULL(9)
-#define XHCI_TRUST_TX_LENGTH	BIT_ULL(10)
+#define XHCI_TRUST_TX_LENGTH	BIT_ULL(10) /* Deprecated */
 #define XHCI_LPM_SUPPORT	BIT_ULL(11)
 #define XHCI_INTEL_HOST		BIT_ULL(12)
 #define XHCI_SPURIOUS_REBOOT	BIT_ULL(13)
@@ -1984,8 +1730,6 @@ static inline bool xhci_has_one_roothub(struct xhci_hcd *xhci)
 	dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
 #define xhci_warn(xhci, fmt, args...) \
 	dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
-#define xhci_warn_ratelimited(xhci, fmt, args...) \
-	dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
 #define xhci_info(xhci, fmt, args...) \
 	dev_info(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
 
@@ -2088,7 +1832,7 @@ struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
 void xhci_free_container_ctx(struct xhci_hcd *xhci,
 		struct xhci_container_ctx *ctx);
 struct xhci_interrupter *
-xhci_create_secondary_interrupter(struct usb_hcd *hcd, int num_seg);
+xhci_create_secondary_interrupter(struct usb_hcd *hcd, unsigned int segs);
 void xhci_remove_secondary_interrupter(struct usb_hcd
 				       *hcd, struct xhci_interrupter *ir);
 
@@ -2201,8 +1945,6 @@ unsigned long xhci_get_resuming_ports(struct usb_hcd *hcd);
 #endif	/* CONFIG_PM */
 
 u32 xhci_port_state_to_neutral(u32 state);
-int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
-		u16 port);
 void xhci_ring_device(struct xhci_hcd *xhci, int slot_id);
 
 /* xHCI contexts */
diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c
index 67f098579f..7b7e1554ea 100644
--- a/drivers/usb/image/mdc800.c
+++ b/drivers/usb/image/mdc800.c
@@ -631,7 +631,6 @@ static int mdc800_device_open (struct inode* inode, struct file *file)
 	mdc800->camera_busy=0;
 	mdc800->camera_request_ready=0;
 
-	retval=0;
 	mdc800->irq_urb->dev = mdc800->dev;
 	retval = usb_submit_urb (mdc800->irq_urb, GFP_KERNEL);
 	if (retval) {
diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c
index 76862ba40f..0e5e4cb74c 100644
--- a/drivers/usb/isp1760/isp1760-hcd.c
+++ b/drivers/usb/isp1760/isp1760-hcd.c
@@ -2521,21 +2521,19 @@ static const struct hc_driver isp1760_hc_driver = {
 int __init isp1760_init_kmem_once(void)
 {
 	urb_listitem_cachep = kmem_cache_create("isp1760_urb_listitem",
-			sizeof(struct urb_listitem), 0, SLAB_TEMPORARY |
-			SLAB_MEM_SPREAD, NULL);
+			sizeof(struct urb_listitem), 0, SLAB_TEMPORARY, NULL);
 
 	if (!urb_listitem_cachep)
 		return -ENOMEM;
 
 	qtd_cachep = kmem_cache_create("isp1760_qtd",
-			sizeof(struct isp1760_qtd), 0, SLAB_TEMPORARY |
-			SLAB_MEM_SPREAD, NULL);
+			sizeof(struct isp1760_qtd), 0, SLAB_TEMPORARY, NULL);
 
 	if (!qtd_cachep)
 		goto destroy_urb_listitem;
 
 	qh_cachep = kmem_cache_create("isp1760_qh", sizeof(struct isp1760_qh),
-			0, SLAB_TEMPORARY | SLAB_MEM_SPREAD, NULL);
+			0, SLAB_TEMPORARY, NULL);
 
 	if (!qh_cachep)
 		goto destroy_qtd;
diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c
index e162838bec..d8049275a0 100644
--- a/drivers/usb/misc/onboard_usb_hub.c
+++ b/drivers/usb/misc/onboard_usb_hub.c
@@ -264,7 +264,7 @@ static int onboard_hub_probe(struct platform_device *pdev)
 	if (!hub)
 		return -ENOMEM;
 
-	hub->pdata = device_get_match_data(&pdev->dev);
+	hub->pdata = device_get_match_data(dev);
 	if (!hub->pdata)
 		return -EINVAL;
 
@@ -458,6 +458,8 @@ static const struct usb_device_id onboard_hub_id_table[] = {
 	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x5411) }, /* RTS5411 USB 2.1 */
 	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x0414) }, /* RTS5414 USB 3.2 */
 	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x5414) }, /* RTS5414 USB 2.1 */
+	{ USB_DEVICE(VENDOR_ID_TI, 0x8025) }, /* TI USB8020B 3.0 */
+	{ USB_DEVICE(VENDOR_ID_TI, 0x8027) }, /* TI USB8020B 2.0 */
 	{ USB_DEVICE(VENDOR_ID_TI, 0x8140) }, /* TI USB8041 3.0 */
 	{ USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 */
 	{ USB_DEVICE(VENDOR_ID_VIA, 0x0817) }, /* VIA VL817 3.1 */
diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h
index f360d5cf8d..b4b15d45f8 100644
--- a/drivers/usb/misc/onboard_usb_hub.h
+++ b/drivers/usb/misc/onboard_usb_hub.h
@@ -26,6 +26,11 @@ static const struct onboard_hub_pdata realtek_rts5411_data = {
 	.num_supplies = 1,
 };
 
+static const struct onboard_hub_pdata ti_tusb8020b_data = {
+	.reset_us = 3000,
+	.num_supplies = 1,
+};
+
 static const struct onboard_hub_pdata ti_tusb8041_data = {
 	.reset_us = 3000,
 	.num_supplies = 1,
@@ -62,6 +67,8 @@ static const struct of_device_id onboard_hub_match[] = {
 	{ .compatible = "usb424,2517", .data = &microchip_usb424_data, },
 	{ .compatible = "usb424,2744", .data = &microchip_usb5744_data, },
 	{ .compatible = "usb424,5744", .data = &microchip_usb5744_data, },
+	{ .compatible = "usb451,8025", .data = &ti_tusb8020b_data, },
+	{ .compatible = "usb451,8027", .data = &ti_tusb8020b_data, },
 	{ .compatible = "usb451,8140", .data = &ti_tusb8041_data, },
 	{ .compatible = "usb451,8142", .data = &ti_tusb8041_data, },
 	{ .compatible = "usb4b4,6504", .data = &cypress_hx3_data, },
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
index b00d92db5d..eb5a8e0d9e 100644
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -677,7 +677,7 @@ static int uss720_probe(struct usb_interface *intf,
 	struct parport_uss720_private *priv;
 	struct parport *pp;
 	unsigned char reg;
-	int i;
+	int ret;
 
 	dev_dbg(&intf->dev, "probe: vendor id 0x%x, device id 0x%x\n",
 		le16_to_cpu(usbdev->descriptor.idVendor),
@@ -688,8 +688,8 @@ static int uss720_probe(struct usb_interface *intf,
 		usb_put_dev(usbdev);
 		return -ENODEV;
 	}
-	i = usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 2);
-	dev_dbg(&intf->dev, "set interface result %d\n", i);
+	ret = usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 2);
+	dev_dbg(&intf->dev, "set interface result %d\n", ret);
 
 	interface = intf->cur_altsetting;
 
@@ -725,12 +725,18 @@ static int uss720_probe(struct usb_interface *intf,
 	set_1284_register(pp, 7, 0x00, GFP_KERNEL);
 	set_1284_register(pp, 6, 0x30, GFP_KERNEL);  /* PS/2 mode */
 	set_1284_register(pp, 2, 0x0c, GFP_KERNEL);
-	/* debugging */
-	get_1284_register(pp, 0, &reg, GFP_KERNEL);
+
+	/* The Belkin F5U002 Rev 2 P80453-B USB parallel port adapter shares the
+	 * device ID 050d:0002 with some other device that works with this
+	 * driver, but it itself does not. Detect and handle the bad cable
+	 * here. */
+	ret = get_1284_register(pp, 0, &reg, GFP_KERNEL);
 	dev_dbg(&intf->dev, "reg: %7ph\n", priv->reg);
+	if (ret < 0)
+		return ret;
 
-	i = usb_find_last_int_in_endpoint(interface, &epd);
-	if (!i) {
+	ret = usb_find_last_int_in_endpoint(interface, &epd);
+	if (!ret) {
 		dev_dbg(&intf->dev, "epaddr %d interval %d\n",
 				epd->bEndpointAddress, epd->bInterval);
 	}
diff --git a/drivers/usb/mtu3/mtu3_host.c b/drivers/usb/mtu3/mtu3_host.c
index 9f2be22af8..7c657ea2da 100644
--- a/drivers/usb/mtu3/mtu3_host.c
+++ b/drivers/usb/mtu3/mtu3_host.c
@@ -34,6 +34,18 @@
 #define WC0_SSUSB0_CDEN		BIT(6)
 #define WC0_IS_SPM_EN		BIT(1)
 
+/* mt8195 */
+#define PERI_WK_CTRL0_8195	0x04
+#define WC0_IS_P_95		BIT(30)	/* polarity */
+#define WC0_IS_C_95(x)		((u32)(((x) & 0x7) << 27))
+#define WC0_IS_EN_P3_95		BIT(26)
+#define WC0_IS_EN_P2_95		BIT(25)
+
+#define PERI_WK_CTRL1_8195	0x20
+#define WC1_IS_C_95(x)		((u32)(((x) & 0xf) << 28))
+#define WC1_IS_P_95		BIT(12)
+#define WC1_IS_EN_P0_95		BIT(6)
+
 /* mt2712 etc */
 #define PERI_SSUSB_SPM_CTRL	0x0
 #define SSC_IP_SLEEP_EN	BIT(4)
@@ -44,6 +56,9 @@ enum ssusb_uwk_vers {
 	SSUSB_UWK_V2,
 	SSUSB_UWK_V1_1 = 101,	/* specific revision 1.01 */
 	SSUSB_UWK_V1_2,		/* specific revision 1.02 */
+	SSUSB_UWK_V1_3,		/* mt8195 IP0 */
+	SSUSB_UWK_V1_5 = 105,	/* mt8195 IP2 */
+	SSUSB_UWK_V1_6,		/* mt8195 IP3 */
 };
 
 /*
@@ -70,6 +85,21 @@ static void ssusb_wakeup_ip_sleep_set(struct ssusb_mtk *ssusb, bool enable)
 		msk = WC0_SSUSB0_CDEN | WC0_IS_SPM_EN;
 		val = enable ? msk : 0;
 		break;
+	case SSUSB_UWK_V1_3:
+		reg = ssusb->uwk_reg_base + PERI_WK_CTRL1_8195;
+		msk = WC1_IS_EN_P0_95 | WC1_IS_C_95(0xf) | WC1_IS_P_95;
+		val = enable ? (WC1_IS_EN_P0_95 | WC1_IS_C_95(0x1)) : 0;
+		break;
+	case SSUSB_UWK_V1_5:
+		reg = ssusb->uwk_reg_base + PERI_WK_CTRL0_8195;
+		msk = WC0_IS_EN_P2_95 | WC0_IS_C_95(0x7) | WC0_IS_P_95;
+		val = enable ? (WC0_IS_EN_P2_95 | WC0_IS_C_95(0x1)) : 0;
+		break;
+	case SSUSB_UWK_V1_6:
+		reg = ssusb->uwk_reg_base + PERI_WK_CTRL0_8195;
+		msk = WC0_IS_EN_P3_95 | WC0_IS_C_95(0x7) | WC0_IS_P_95;
+		val = enable ? (WC0_IS_EN_P3_95 | WC0_IS_C_95(0x1)) : 0;
+		break;
 	case SSUSB_UWK_V2:
 		reg = ssusb->uwk_reg_base + PERI_SSUSB_SPM_CTRL;
 		msk = SSC_IP_SLEEP_EN | SSC_SPM_INT_EN;
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 051c6da7cf..55df0ee413 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1744,7 +1744,6 @@ static inline void musb_g_init_endpoints(struct musb *musb)
 {
 	u8			epnum;
 	struct musb_hw_ep	*hw_ep;
-	unsigned		count = 0;
 
 	/* initialize endpoint list just once */
 	INIT_LIST_HEAD(&(musb->g.ep_list));
@@ -1754,17 +1753,14 @@ static inline void musb_g_init_endpoints(struct musb *musb)
 			epnum++, hw_ep++) {
 		if (hw_ep->is_shared_fifo /* || !epnum */) {
 			init_peripheral_ep(musb, &hw_ep->ep_in, epnum, 0);
-			count++;
 		} else {
 			if (hw_ep->max_packet_sz_tx) {
 				init_peripheral_ep(musb, &hw_ep->ep_in,
 							epnum, 1);
-				count++;
 			}
 			if (hw_ep->max_packet_sz_rx) {
 				init_peripheral_ep(musb, &hw_ep->ep_out,
 							epnum, 0);
-				count++;
 			}
 		}
 	}
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index 9ab50f26db..fdcffebf41 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -74,33 +74,26 @@ static void nop_reset(struct usb_phy_generic *nop)
 }
 
 /* interface to regulator framework */
-static void nop_set_vbus_draw(struct usb_phy_generic *nop, unsigned mA)
+static int nop_set_vbus(struct usb_otg *otg, bool enable)
 {
-	struct regulator *vbus_draw = nop->vbus_draw;
-	int enabled;
-	int ret;
+	int ret = 0;
+	struct usb_phy_generic *nop = dev_get_drvdata(otg->usb_phy->dev);
 
-	if (!vbus_draw)
-		return;
+	if (!nop->vbus_draw)
+		return 0;
 
-	enabled = nop->vbus_draw_enabled;
-	if (mA) {
-		regulator_set_current_limit(vbus_draw, 0, 1000 * mA);
-		if (!enabled) {
-			ret = regulator_enable(vbus_draw);
-			if (ret < 0)
-				return;
-			nop->vbus_draw_enabled = 1;
-		}
-	} else {
-		if (enabled) {
-			ret = regulator_disable(vbus_draw);
-			if (ret < 0)
-				return;
-			nop->vbus_draw_enabled = 0;
-		}
+	if (enable && !nop->vbus_draw_enabled) {
+		ret = regulator_enable(nop->vbus_draw);
+		if (ret)
+			nop->vbus_draw_enabled = false;
+		else
+			nop->vbus_draw_enabled = true;
+
+	} else if (!enable && nop->vbus_draw_enabled) {
+		ret = regulator_disable(nop->vbus_draw);
+		nop->vbus_draw_enabled = false;
 	}
-	nop->mA = mA;
+	return ret;
 }
 
 
@@ -120,14 +113,9 @@ static irqreturn_t nop_gpio_vbus_thread(int irq, void *data)
 		otg->state = OTG_STATE_B_PERIPHERAL;
 		nop->phy.last_event = status;
 
-		/* drawing a "unit load" is *always* OK, except for OTG */
-		nop_set_vbus_draw(nop, 100);
-
 		atomic_notifier_call_chain(&nop->phy.notifier, status,
 					   otg->gadget);
 	} else {
-		nop_set_vbus_draw(nop, 0);
-
 		status = USB_EVENT_NONE;
 		otg->state = OTG_STATE_B_IDLE;
 		nop->phy.last_event = status;
@@ -284,6 +272,7 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop)
 	nop->phy.otg->usb_phy		= &nop->phy;
 	nop->phy.otg->set_host		= nop_set_host;
 	nop->phy.otg->set_peripheral	= nop_set_peripheral;
+	nop->phy.otg->set_vbus          = nop_set_vbus;
 
 	return 0;
 }
@@ -341,6 +330,9 @@ static void usb_phy_generic_remove(struct platform_device *pdev)
 	struct usb_phy_generic *nop = platform_get_drvdata(pdev);
 
 	usb_remove_phy(&nop->phy);
+
+	if (nop->vbus_draw && nop->vbus_draw_enabled)
+		regulator_disable(nop->vbus_draw);
 }
 
 static const struct of_device_id nop_xceiv_dt_ids[] = {
diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
index 4b468bde19..06e0fb2356 100644
--- a/drivers/usb/phy/phy.c
+++ b/drivers/usb/phy/phy.c
@@ -699,7 +699,7 @@ out:
 }
 EXPORT_SYMBOL_GPL(usb_add_phy);
 
-static struct device_type usb_phy_dev_type = {
+static const struct device_type usb_phy_dev_type = {
 	.name = "usb_phy",
 	.uevent = usb_phy_uevent,
 };
diff --git a/drivers/usb/roles/class.c b/drivers/usb/roles/class.c
index 70165dd86b..d7aa913ceb 100644
--- a/drivers/usb/roles/class.c
+++ b/drivers/usb/roles/class.c
@@ -7,6 +7,7 @@
  *         Hans de Goede <hdegoede@redhat.com>
  */
 
+#include <linux/component.h>
 #include <linux/usb/role.h>
 #include <linux/property.h>
 #include <linux/device.h>
@@ -36,6 +37,32 @@ struct usb_role_switch {
 
 #define to_role_switch(d)	container_of(d, struct usb_role_switch, dev)
 
+static int connector_bind(struct device *dev, struct device *connector, void *data)
+{
+	int ret;
+
+	ret = sysfs_create_link(&dev->kobj, &connector->kobj, "connector");
+	if (ret)
+		return ret;
+
+	ret = sysfs_create_link(&connector->kobj, &dev->kobj, "usb-role-switch");
+	if (ret)
+		sysfs_remove_link(&dev->kobj, "connector");
+
+	return ret;
+}
+
+static void connector_unbind(struct device *dev, struct device *connector, void *data)
+{
+	sysfs_remove_link(&connector->kobj, "usb-role-switch");
+	sysfs_remove_link(&dev->kobj, "connector");
+}
+
+static const struct component_ops connector_ops = {
+	.bind = connector_bind,
+	.unbind = connector_unbind,
+};
+
 /**
  * usb_role_switch_set_role - Set USB role for a switch
  * @sw: USB role switch
@@ -361,6 +388,12 @@ usb_role_switch_register(struct device *parent,
 		return ERR_PTR(ret);
 	}
 
+	if (dev_fwnode(&sw->dev)) {
+		ret = component_add(&sw->dev, &connector_ops);
+		if (ret)
+			dev_warn(&sw->dev, "failed to add component\n");
+	}
+
 	sw->registered = true;
 
 	/* TODO: Symlinks for the host port and the device controller. */
@@ -377,10 +410,12 @@ EXPORT_SYMBOL_GPL(usb_role_switch_register);
  */
 void usb_role_switch_unregister(struct usb_role_switch *sw)
 {
-	if (!IS_ERR_OR_NULL(sw)) {
-		sw->registered = false;
-		device_unregister(&sw->dev);
-	}
+	if (IS_ERR_OR_NULL(sw))
+		return;
+	sw->registered = false;
+	if (dev_fwnode(&sw->dev))
+		component_del(&sw->dev, &connector_ops);
+	device_unregister(&sw->dev);
 }
 EXPORT_SYMBOL_GPL(usb_role_switch_unregister);
 
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 22d01a0f10..76a04ab411 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2612,7 +2612,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 	struct device *ddev = &port->dev;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	struct ktermios *termios = &tty->termios;
-	unsigned int cflag = termios->c_cflag;
+	unsigned int cflag;
 	u16 value, index;
 	int ret;
 
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 93b17e0e05..0a78398519 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -921,7 +921,6 @@ static void usa28_indat_callback(struct urb *urb)
 
 	port =  urb->context;
 	p_priv = usb_get_serial_port_data(port);
-	data = urb->transfer_buffer;
 
 	if (urb != p_priv->in_urbs[p_priv->in_flip])
 		return;
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 6365cfe540..fa07f6ff9e 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -409,7 +409,6 @@ static void oti6858_set_termios(struct tty_struct *tty,
 	cflag = tty->termios.c_cflag;
 
 	spin_lock_irqsave(&priv->lock, flags);
-	divisor = priv->pending_setup.divisor;
 	frame_fmt = priv->pending_setup.frame_fmt;
 	control = priv->pending_setup.control;
 	spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
index 115f05a620..40d34cc283 100644
--- a/drivers/usb/storage/alauda.c
+++ b/drivers/usb/storage/alauda.c
@@ -105,6 +105,8 @@ struct alauda_info {
 	unsigned char sense_key;
 	unsigned long sense_asc;	/* additional sense code */
 	unsigned long sense_ascq;	/* additional sense code qualifier */
+
+	bool media_initialized;
 };
 
 #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
@@ -476,11 +478,12 @@ static int alauda_check_media(struct us_data *us)
 	}
 
 	/* Check for media change */
-	if (status[0] & 0x08) {
+	if (status[0] & 0x08 || !info->media_initialized) {
 		usb_stor_dbg(us, "Media change detected\n");
 		alauda_free_maps(&MEDIA_INFO(us));
-		alauda_init_media(us);
-
+		rc = alauda_init_media(us);
+		if (rc == USB_STOR_TRANSPORT_GOOD)
+			info->media_initialized = true;
 		info->sense_key = UNIT_ATTENTION;
 		info->sense_asc = 0x28;
 		info->sense_ascq = 0x00;
diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c
index 2b098b55c4..c3ce51c2da 100644
--- a/drivers/usb/storage/freecom.c
+++ b/drivers/usb/storage/freecom.c
@@ -534,7 +534,6 @@ static void pdump(struct us_data *us, void *ibuffer, int length)
 	}
 	line[offset] = 0;
 	usb_stor_dbg(us, "%s\n", line);
-	offset = 0;
 }
 #endif
 
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 12cf9940e5..7d87e2a521 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -86,6 +86,12 @@ static int slave_alloc (struct scsi_device *sdev)
 	if (us->protocol == USB_PR_BULK && us->max_lun > 0)
 		sdev->sdev_bflags |= BLIST_FORCELUN;
 
+	/*
+	 * Some USB storage devices reset if the IO advice hints grouping mode
+	 * page is queried. Hence skip that mode page.
+	 */
+	sdev->sdev_bflags |= BLIST_SKIP_IO_HINTS;
+
 	return 0;
 }
 
diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c
index 15dc25801c..0aa079405d 100644
--- a/drivers/usb/storage/sddr55.c
+++ b/drivers/usb/storage/sddr55.c
@@ -196,7 +196,7 @@ static int sddr55_read_data(struct us_data *us,
 	unsigned char *buffer;
 
 	unsigned int pba;
-	unsigned long address;
+	unsigned int address;
 
 	unsigned short pages;
 	unsigned int len, offset;
@@ -316,7 +316,7 @@ static int sddr55_write_data(struct us_data *us,
 
 	unsigned int pba;
 	unsigned int new_pba;
-	unsigned long address;
+	unsigned int address;
 
 	unsigned short pages;
 	int i;
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 08953f0d45..1ed2bdda0c 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -21,6 +21,7 @@
 #include <scsi/scsi.h>
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_dbg.h>
+#include <scsi/scsi_devinfo.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
@@ -820,6 +821,12 @@ static int uas_slave_alloc(struct scsi_device *sdev)
 	struct uas_dev_info *devinfo =
 		(struct uas_dev_info *)sdev->host->hostdata;
 
+	/*
+	 * Some USB storage devices reset if the IO advice hints grouping mode
+	 * page is queried. Hence skip that mode page.
+	 */
+	sdev->sdev_bflags |= BLIST_SKIP_IO_HINTS;
+
 	sdev->hostdata = devinfo;
 
 	/*
diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c
index f8ea3054be..038dc51f42 100644
--- a/drivers/usb/typec/altmodes/displayport.c
+++ b/drivers/usb/typec/altmodes/displayport.c
@@ -50,13 +50,17 @@ enum {
 enum dp_state {
 	DP_STATE_IDLE,
 	DP_STATE_ENTER,
+	DP_STATE_ENTER_PRIME,
 	DP_STATE_UPDATE,
 	DP_STATE_CONFIGURE,
+	DP_STATE_CONFIGURE_PRIME,
 	DP_STATE_EXIT,
+	DP_STATE_EXIT_PRIME,
 };
 
 struct dp_altmode {
 	struct typec_displayport_data data;
+	struct typec_displayport_data data_prime;
 
 	enum dp_state state;
 	bool hpd;
@@ -67,6 +71,7 @@ struct dp_altmode {
 	struct typec_altmode *alt;
 	const struct typec_altmode *port;
 	struct fwnode_handle *connector_fwnode;
+	struct typec_altmode *plug_prime;
 };
 
 static int dp_altmode_notify(struct dp_altmode *dp)
@@ -99,12 +104,18 @@ static int dp_altmode_configure(struct dp_altmode *dp, u8 con)
 		conf |= DP_CONF_UFP_U_AS_DFP_D;
 		pin_assign = DP_CAP_UFP_D_PIN_ASSIGN(dp->alt->vdo) &
 			     DP_CAP_DFP_D_PIN_ASSIGN(dp->port->vdo);
+		/* Account for active cable capabilities */
+		if (dp->plug_prime)
+			pin_assign &= DP_CAP_DFP_D_PIN_ASSIGN(dp->plug_prime->vdo);
 		break;
 	case DP_STATUS_CON_UFP_D:
 	case DP_STATUS_CON_BOTH: /* NOTE: First acting as DP source */
 		conf |= DP_CONF_UFP_U_AS_UFP_D;
 		pin_assign = DP_CAP_PIN_ASSIGN_UFP_D(dp->alt->vdo) &
 				 DP_CAP_PIN_ASSIGN_DFP_D(dp->port->vdo);
+		/* Account for active cable capabilities */
+		if (dp->plug_prime)
+			pin_assign &= DP_CAP_UFP_D_PIN_ASSIGN(dp->plug_prime->vdo);
 		break;
 	default:
 		break;
@@ -130,6 +141,8 @@ static int dp_altmode_configure(struct dp_altmode *dp, u8 con)
 	}
 
 	dp->data.conf = conf;
+	if (dp->plug_prime)
+		dp->data_prime.conf = conf;
 
 	return 0;
 }
@@ -143,13 +156,16 @@ static int dp_altmode_status_update(struct dp_altmode *dp)
 
 	if (configured && (dp->data.status & DP_STATUS_SWITCH_TO_USB)) {
 		dp->data.conf = 0;
-		dp->state = DP_STATE_CONFIGURE;
+		dp->data_prime.conf = 0;
+		dp->state = dp->plug_prime ? DP_STATE_CONFIGURE_PRIME :
+					     DP_STATE_CONFIGURE;
 	} else if (dp->data.status & DP_STATUS_EXIT_DP_MODE) {
 		dp->state = DP_STATE_EXIT;
 	} else if (!(con & DP_CONF_CURRENTLY(dp->data.conf))) {
 		ret = dp_altmode_configure(dp, con);
 		if (!ret) {
-			dp->state = DP_STATE_CONFIGURE;
+			dp->state = dp->plug_prime ? DP_STATE_CONFIGURE_PRIME :
+						     DP_STATE_CONFIGURE;
 			if (dp->hpd != hpd) {
 				dp->hpd = hpd;
 				dp->pending_hpd = true;
@@ -209,6 +225,19 @@ static int dp_altmode_configure_vdm(struct dp_altmode *dp, u32 conf)
 	return ret;
 }
 
+static int dp_altmode_configure_vdm_cable(struct dp_altmode *dp, u32 conf)
+{
+	int svdm_version = typec_altmode_get_cable_svdm_version(dp->plug_prime);
+	u32 header;
+
+	if (svdm_version < 0)
+		return svdm_version;
+
+	header = DP_HEADER(dp, svdm_version, DP_CMD_CONFIGURE);
+
+	return typec_cable_altmode_vdm(dp->plug_prime, TYPEC_PLUG_SOP_P, header, &conf, 2);
+}
+
 static void dp_altmode_work(struct work_struct *work)
 {
 	struct dp_altmode *dp = container_of(work, struct dp_altmode, work);
@@ -225,6 +254,19 @@ static void dp_altmode_work(struct work_struct *work)
 		if (ret && ret != -EBUSY)
 			dev_err(&dp->alt->dev, "failed to enter mode\n");
 		break;
+	case DP_STATE_ENTER_PRIME:
+		ret = typec_cable_altmode_enter(dp->alt, TYPEC_PLUG_SOP_P, NULL);
+		/*
+		 * If we fail to enter Alt Mode on SOP', then we should drop the
+		 * plug from the driver and attempt to run the driver without
+		 * it.
+		 */
+		if (ret && ret != -EBUSY) {
+			dev_err(&dp->alt->dev, "plug failed to enter mode\n");
+			dp->state = DP_STATE_ENTER;
+			goto disable_prime;
+		}
+		break;
 	case DP_STATE_UPDATE:
 		svdm_version = typec_altmode_get_svdm_version(dp->alt);
 		if (svdm_version < 0)
@@ -243,10 +285,24 @@ static void dp_altmode_work(struct work_struct *work)
 			dev_err(&dp->alt->dev,
 				"unable to send Configure command (%d)\n", ret);
 		break;
+	case DP_STATE_CONFIGURE_PRIME:
+		ret = dp_altmode_configure_vdm_cable(dp, dp->data_prime.conf);
+		if (ret) {
+			dev_err(&dp->plug_prime->dev,
+				"unable to send Configure command (%d)\n",
+				ret);
+			dp->state = DP_STATE_CONFIGURE;
+			goto disable_prime;
+		}
+		break;
 	case DP_STATE_EXIT:
 		if (typec_altmode_exit(dp->alt))
 			dev_err(&dp->alt->dev, "Exit Mode Failed!\n");
 		break;
+	case DP_STATE_EXIT_PRIME:
+		if (typec_cable_altmode_exit(dp->plug_prime, TYPEC_PLUG_SOP_P))
+			dev_err(&dp->plug_prime->dev, "Exit Mode Failed!\n");
+		break;
 	default:
 		break;
 	}
@@ -254,6 +310,13 @@ static void dp_altmode_work(struct work_struct *work)
 	dp->state = DP_STATE_IDLE;
 
 	mutex_unlock(&dp->lock);
+	return;
+
+disable_prime:
+	typec_altmode_put_plug(dp->plug_prime);
+	dp->plug_prime = NULL;
+	schedule_work(&dp->work);
+	mutex_unlock(&dp->lock);
 }
 
 static void dp_altmode_attention(struct typec_altmode *alt, const u32 vdo)
@@ -314,6 +377,8 @@ static int dp_altmode_vdm(struct typec_altmode *alt,
 				dp->hpd = false;
 				sysfs_notify(&dp->alt->dev.kobj, "displayport", "hpd");
 			}
+			if (dp->plug_prime)
+				dp->state = DP_STATE_EXIT_PRIME;
 			break;
 		case DP_CMD_STATUS_UPDATE:
 			dp->data.status = *vdo;
@@ -348,10 +413,84 @@ err_unlock:
 	return ret;
 }
 
+static int dp_cable_altmode_vdm(struct typec_altmode *alt, enum typec_plug_index sop,
+				const u32 hdr, const u32 *vdo, int count)
+{
+	struct dp_altmode *dp = typec_altmode_get_drvdata(alt);
+	int cmd_type = PD_VDO_CMDT(hdr);
+	int cmd = PD_VDO_CMD(hdr);
+	int ret = 0;
+
+	mutex_lock(&dp->lock);
+
+	if (dp->state != DP_STATE_IDLE) {
+		ret = -EBUSY;
+		goto err_unlock;
+	}
+
+	switch (cmd_type) {
+	case CMDT_RSP_ACK:
+		switch (cmd) {
+		case CMD_ENTER_MODE:
+			typec_altmode_update_active(dp->plug_prime, true);
+			dp->state = DP_STATE_ENTER;
+			break;
+		case CMD_EXIT_MODE:
+			dp->data_prime.status = 0;
+			dp->data_prime.conf = 0;
+			typec_altmode_update_active(dp->plug_prime, false);
+			break;
+		case DP_CMD_CONFIGURE:
+			dp->state = DP_STATE_CONFIGURE;
+			break;
+		default:
+			break;
+		}
+		break;
+	case CMDT_RSP_NAK:
+		switch (cmd) {
+		case DP_CMD_CONFIGURE:
+			dp->data_prime.conf = 0;
+			/* Attempt to configure on SOP, drop plug */
+			typec_altmode_put_plug(dp->plug_prime);
+			dp->plug_prime = NULL;
+			dp->state = DP_STATE_CONFIGURE;
+			break;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	if (dp->state != DP_STATE_IDLE)
+		schedule_work(&dp->work);
+
+err_unlock:
+	mutex_unlock(&dp->lock);
+	return ret;
+}
+
 static int dp_altmode_activate(struct typec_altmode *alt, int activate)
 {
-	return activate ? typec_altmode_enter(alt, NULL) :
-			  typec_altmode_exit(alt);
+	struct dp_altmode *dp = typec_altmode_get_drvdata(alt);
+	int ret;
+
+	if (activate) {
+		if (dp->plug_prime) {
+			ret = typec_cable_altmode_enter(alt, TYPEC_PLUG_SOP_P, NULL);
+			if (ret < 0) {
+				typec_altmode_put_plug(dp->plug_prime);
+				dp->plug_prime = NULL;
+			} else {
+				return ret;
+			}
+		}
+		return typec_altmode_enter(alt, NULL);
+	} else {
+		return typec_altmode_exit(alt);
+	}
 }
 
 static const struct typec_altmode_ops dp_altmode_ops = {
@@ -360,6 +499,10 @@ static const struct typec_altmode_ops dp_altmode_ops = {
 	.activate = dp_altmode_activate,
 };
 
+static const struct typec_cable_ops dp_cable_ops = {
+	.vdm = dp_cable_altmode_vdm,
+};
+
 static const char * const configurations[] = {
 	[DP_CONF_USB]	= "USB",
 	[DP_CONF_DFP_D]	= "source",
@@ -501,6 +644,7 @@ pin_assignment_store(struct device *dev, struct device_attribute *attr,
 
 	/* Only send Configure command if a configuration has been set */
 	if (dp->alt->active && DP_CONF_CURRENTLY(dp->data.conf)) {
+		/* todo: send manual configure over SOP'*/
 		ret = dp_altmode_configure_vdm(dp, conf);
 		if (ret)
 			goto out_unlock;
@@ -579,6 +723,7 @@ static const struct attribute_group *displayport_groups[] = {
 int dp_altmode_probe(struct typec_altmode *alt)
 {
 	const struct typec_altmode *port = typec_altmode_get_partner(alt);
+	struct typec_altmode *plug = typec_altmode_get_plug(alt, TYPEC_PLUG_SOP_P);
 	struct fwnode_handle *fwnode;
 	struct dp_altmode *dp;
 
@@ -603,6 +748,13 @@ int dp_altmode_probe(struct typec_altmode *alt)
 	alt->desc = "DisplayPort";
 	alt->ops = &dp_altmode_ops;
 
+	if (plug) {
+		plug->desc = "Displayport";
+		plug->cable_ops = &dp_cable_ops;
+	}
+
+	dp->plug_prime = plug;
+
 	fwnode = dev_fwnode(alt->dev.parent->parent); /* typec_port fwnode */
 	if (fwnode_property_present(fwnode, "displayport"))
 		dp->connector_fwnode = fwnode_find_reference(fwnode, "displayport", 0);
@@ -612,8 +764,10 @@ int dp_altmode_probe(struct typec_altmode *alt)
 		dp->connector_fwnode = NULL;
 
 	typec_altmode_set_drvdata(alt, dp);
+	if (plug)
+		typec_altmode_set_drvdata(plug, dp);
 
-	dp->state = DP_STATE_ENTER;
+	dp->state = plug ? DP_STATE_ENTER_PRIME : DP_STATE_ENTER;
 	schedule_work(&dp->work);
 
 	return 0;
@@ -625,6 +779,7 @@ void dp_altmode_remove(struct typec_altmode *alt)
 	struct dp_altmode *dp = typec_altmode_get_drvdata(alt);
 
 	cancel_work_sync(&dp->work);
+	typec_altmode_put_plug(dp->plug_prime);
 
 	if (dp->connector_fwnode) {
 		drm_connector_oob_hotplug_event(dp->connector_fwnode,
diff --git a/drivers/usb/typec/bus.c b/drivers/usb/typec/bus.c
index e95ec7e382..6ea103e1ab 100644
--- a/drivers/usb/typec/bus.c
+++ b/drivers/usb/typec/bus.c
@@ -245,6 +245,108 @@ typec_altmode_get_partner(struct typec_altmode *adev)
 EXPORT_SYMBOL_GPL(typec_altmode_get_partner);
 
 /* -------------------------------------------------------------------------- */
+/* API for cable alternate modes */
+
+/**
+ * typec_cable_altmode_enter - Enter Mode
+ * @adev: The alternate mode
+ * @sop: Cable plug target for Enter Mode command
+ * @vdo: VDO for the Enter Mode command
+ *
+ * Alternate mode drivers use this function to enter mode on the cable plug.
+ * If the alternate mode does not require VDO, @vdo must be NULL.
+ */
+int typec_cable_altmode_enter(struct typec_altmode *adev, enum typec_plug_index sop, u32 *vdo)
+{
+	struct altmode *partner = to_altmode(adev)->partner;
+	struct typec_altmode *pdev;
+
+	if (!adev || adev->active)
+		return 0;
+
+	if (!partner)
+		return -ENODEV;
+
+	pdev = &partner->adev;
+
+	if (!pdev->active)
+		return -EPERM;
+
+	if (!pdev->cable_ops || !pdev->cable_ops->enter)
+		return -EOPNOTSUPP;
+
+	return pdev->cable_ops->enter(pdev, sop, vdo);
+}
+EXPORT_SYMBOL_GPL(typec_cable_altmode_enter);
+
+/**
+ * typec_cable_altmode_exit - Exit Mode
+ * @adev: The alternate mode
+ * @sop: Cable plug target for Exit Mode command
+ *
+ * The alternate mode drivers use this function to exit mode on the cable plug.
+ */
+int typec_cable_altmode_exit(struct typec_altmode *adev, enum typec_plug_index sop)
+{
+	struct altmode *partner = to_altmode(adev)->partner;
+	struct typec_altmode *pdev;
+
+	if (!adev || !adev->active)
+		return 0;
+
+	if (!partner)
+		return -ENODEV;
+
+	pdev = &partner->adev;
+
+	if (!pdev->cable_ops || !pdev->cable_ops->exit)
+		return -EOPNOTSUPP;
+
+	return pdev->cable_ops->exit(pdev, sop);
+}
+EXPORT_SYMBOL_GPL(typec_cable_altmode_exit);
+
+/**
+ * typec_cable_altmode_vdm - Send Vendor Defined Messages (VDM) between the cable plug and port.
+ * @adev: Alternate mode handle
+ * @sop: Cable plug target for VDM
+ * @header: VDM Header
+ * @vdo: Array of Vendor Defined Data Objects
+ * @count: Number of Data Objects
+ *
+ * The alternate mode drivers use this function for SVID specific communication
+ * with the cable plugs. The port drivers use it to deliver the Structured VDMs
+ * received from the cable plugs to the alternate mode drivers.
+ */
+int typec_cable_altmode_vdm(struct typec_altmode *adev, enum typec_plug_index sop,
+			    const u32 header, const u32 *vdo, int count)
+{
+	struct altmode *altmode;
+	struct typec_altmode *pdev;
+
+	if (!adev)
+		return 0;
+
+	altmode = to_altmode(adev);
+
+	if (is_typec_plug(adev->dev.parent)) {
+		if (!altmode->partner)
+			return -ENODEV;
+		pdev = &altmode->partner->adev;
+	} else {
+		if (!altmode->plug[sop])
+			return -ENODEV;
+		pdev = &altmode->plug[sop]->adev;
+	}
+
+	if (!pdev->cable_ops || !pdev->cable_ops->vdm)
+		return -EOPNOTSUPP;
+
+	return pdev->cable_ops->vdm(pdev, sop, header, vdo, count);
+}
+EXPORT_SYMBOL_GPL(typec_cable_altmode_vdm);
+
+/* -------------------------------------------------------------------------- */
 /* API for the alternate mode drivers */
 
 /**
diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c
index e6a100376f..9610e647a8 100644
--- a/drivers/usb/typec/class.c
+++ b/drivers/usb/typec/class.c
@@ -21,7 +21,7 @@
 
 static DEFINE_IDA(typec_index_ida);
 
-struct class typec_class = {
+const struct class typec_class = {
 	.name = "typec",
 };
 
@@ -2137,6 +2137,46 @@ int typec_get_negotiated_svdm_version(struct typec_port *port)
 EXPORT_SYMBOL_GPL(typec_get_negotiated_svdm_version);
 
 /**
+ * typec_get_cable_svdm_version - Get cable negotiated SVDM Version
+ * @port: USB Type-C Port.
+ *
+ * Get the negotiated SVDM Version for the cable. The Version is set to the port
+ * default value based on the PD Revision during cable registration, and updated
+ * after a successful Discover Identity if the negotiated value is less than the
+ * default.
+ *
+ * Returns usb_pd_svdm_ver if the cable has been registered otherwise -ENODEV.
+ */
+int typec_get_cable_svdm_version(struct typec_port *port)
+{
+	enum usb_pd_svdm_ver svdm_version;
+	struct device *cable_dev;
+
+	cable_dev = device_find_child(&port->dev, NULL, cable_match);
+	if (!cable_dev)
+		return -ENODEV;
+
+	svdm_version = to_typec_cable(cable_dev)->svdm_version;
+	put_device(cable_dev);
+
+	return svdm_version;
+}
+EXPORT_SYMBOL_GPL(typec_get_cable_svdm_version);
+
+/**
+ * typec_cable_set_svdm_version - Set negotiated Structured VDM (SVDM) Version
+ * @cable: USB Type-C Active Cable that supports SVDM
+ * @svdm_version: Negotiated SVDM Version
+ *
+ * This routine is used to save the negotiated SVDM Version.
+ */
+void typec_cable_set_svdm_version(struct typec_cable *cable, enum usb_pd_svdm_ver svdm_version)
+{
+	cable->svdm_version = svdm_version;
+}
+EXPORT_SYMBOL_GPL(typec_cable_set_svdm_version);
+
+/**
  * typec_get_drvdata - Return private driver data pointer
  * @port: USB Type-C port
  */
@@ -2286,6 +2326,25 @@ void typec_port_register_altmodes(struct typec_port *port,
 EXPORT_SYMBOL_GPL(typec_port_register_altmodes);
 
 /**
+ * typec_port_register_cable_ops - Register typec_cable_ops to port altmodes
+ * @altmodes: USB Type-C Port's altmode vector
+ * @max_altmodes: The maximum number of alt modes supported by the port
+ * @ops: Cable alternate mode vector
+ */
+void typec_port_register_cable_ops(struct typec_altmode **altmodes, int max_altmodes,
+				   const struct typec_cable_ops *ops)
+{
+	int i;
+
+	for (i = 0; i < max_altmodes; i++) {
+		if (!altmodes[i])
+			return;
+		altmodes[i]->cable_ops = ops;
+	}
+}
+EXPORT_SYMBOL_GPL(typec_port_register_cable_ops);
+
+/**
  * typec_register_port - Register a USB Type-C Port
  * @parent: Parent device
  * @cap: Description of the port
diff --git a/drivers/usb/typec/class.h b/drivers/usb/typec/class.h
index c36761ba3f..7485cdb9dd 100644
--- a/drivers/usb/typec/class.h
+++ b/drivers/usb/typec/class.h
@@ -23,6 +23,7 @@ struct typec_cable {
 	struct usb_pd_identity		*identity;
 	unsigned int			active:1;
 	u16				pd_revision; /* 0300H = "3.0" */
+	enum usb_pd_svdm_ver		svdm_version;
 };
 
 struct typec_partner {
@@ -92,9 +93,9 @@ extern const struct device_type typec_port_dev_type;
 #define is_typec_plug(dev) ((dev)->type == &typec_plug_dev_type)
 #define is_typec_port(dev) ((dev)->type == &typec_port_dev_type)
 
-extern struct class typec_mux_class;
-extern struct class retimer_class;
-extern struct class typec_class;
+extern const struct class typec_mux_class;
+extern const struct class retimer_class;
+extern const struct class typec_class;
 
 #if defined(CONFIG_ACPI)
 int typec_link_ports(struct typec_port *connector);
diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c
index 80dd91938d..49926d6e72 100644
--- a/drivers/usb/typec/mux.c
+++ b/drivers/usb/typec/mux.c
@@ -469,6 +469,6 @@ void *typec_mux_get_drvdata(struct typec_mux_dev *mux_dev)
 }
 EXPORT_SYMBOL_GPL(typec_mux_get_drvdata);
 
-struct class typec_mux_class = {
+const struct class typec_mux_class = {
 	.name = "typec_mux",
 };
diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig
index d2cb5e733e..399c7b0983 100644
--- a/drivers/usb/typec/mux/Kconfig
+++ b/drivers/usb/typec/mux/Kconfig
@@ -36,6 +36,16 @@ config TYPEC_MUX_INTEL_PMC
 	  control the USB role switch and also the multiplexer/demultiplexer
 	  switches used with USB Type-C Alternate Modes.
 
+config TYPEC_MUX_IT5205
+	tristate "ITE IT5205 Type-C USB Alt Mode Passive MUX driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Driver for the ITE IT5205 Type-C USB Alternate Mode Passive MUX
+	  which provides support for muxing DisplayPort and sideband signals
+	  on a common USB Type-C connector.
+	  If compiled as a module, the module will be named it5205.
+
 config TYPEC_MUX_NB7VPQ904M
 	tristate "On Semiconductor NB7VPQ904M Type-C redriver driver"
 	depends on I2C
diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile
index 57dc9ac6f8..bb96f30267 100644
--- a/drivers/usb/typec/mux/Makefile
+++ b/drivers/usb/typec/mux/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_TYPEC_MUX_FSA4480)		+= fsa4480.o
 obj-$(CONFIG_TYPEC_MUX_GPIO_SBU)	+= gpio-sbu-mux.o
 obj-$(CONFIG_TYPEC_MUX_PI3USB30532)	+= pi3usb30532.o
 obj-$(CONFIG_TYPEC_MUX_INTEL_PMC)	+= intel_pmc_mux.o
+obj-$(CONFIG_TYPEC_MUX_IT5205)		+= it5205.o
 obj-$(CONFIG_TYPEC_MUX_NB7VPQ904M)	+= nb7vpq904m.o
 obj-$(CONFIG_TYPEC_MUX_PTN36502)	+= ptn36502.o
 obj-$(CONFIG_TYPEC_MUX_WCD939X_USBSS)	+= wcd939x-usbss.o
diff --git a/drivers/usb/typec/mux/it5205.c b/drivers/usb/typec/mux/it5205.c
new file mode 100644
index 0000000000..4357cc67a8
--- /dev/null
+++ b/drivers/usb/typec/mux/it5205.c
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ITE IT5205 Type-C USB alternate mode passive mux
+ *
+ * Copyright (c) 2020 MediaTek Inc.
+ * Copyright (c) 2024 Collabora Ltd.
+ *                    AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/tcpm.h>
+#include <linux/usb/typec.h>
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/typec_mux.h>
+
+#define IT5205_REG_CHIP_ID(x)	(0x4 + (x))
+#define IT5205FN_CHIP_ID	0x35303235 /* "5025" -> "5205" */
+
+/* MUX power down register */
+#define IT5205_REG_MUXPDR        0x10
+#define IT5205_MUX_POWER_DOWN    BIT(0)
+
+/* MUX control register */
+#define IT5205_REG_MUXCR         0x11
+#define IT5205_POLARITY_INVERTED BIT(4)
+#define IT5205_DP_USB_CTRL_MASK  GENMASK(3, 0)
+#define IT5205_DP                0x0f
+#define IT5205_DP_USB            0x03
+#define IT5205_USB               0x07
+
+/* Vref Select Register */
+#define IT5205_REG_VSR            0x10
+#define IT5205_VREF_SELECT_MASK   GENMASK(5, 4)
+#define IT5205_VREF_SELECT_3_3V   0x00
+#define IT5205_VREF_SELECT_OFF    0x20
+
+/* CSBU Over Voltage Protection Register */
+#define IT5205_REG_CSBUOVPSR      0x1e
+#define IT5205_OVP_SELECT_MASK    GENMASK(5, 4)
+#define IT5205_OVP_3_90V          0x00
+#define IT5205_OVP_3_68V          0x10
+#define IT5205_OVP_3_62V          0x20
+#define IT5205_OVP_3_57V          0x30
+
+/* CSBU Switch Register */
+#define IT5205_REG_CSBUSR         0x22
+#define IT5205_CSBUSR_SWITCH      BIT(0)
+
+/* Interrupt Switch Register */
+#define IT5205_REG_ISR            0x25
+#define IT5205_ISR_CSBU_MASK      BIT(4)
+#define IT5205_ISR_CSBU_OVP       BIT(0)
+
+struct it5205 {
+	struct i2c_client *client;
+	struct regmap *regmap;
+	struct typec_switch_dev *sw;
+	struct typec_mux_dev *mux;
+};
+
+static int it5205_switch_set(struct typec_switch_dev *sw, enum typec_orientation orientation)
+{
+	struct it5205 *it = typec_switch_get_drvdata(sw);
+
+	switch (orientation) {
+	case TYPEC_ORIENTATION_NORMAL:
+		regmap_update_bits(it->regmap, IT5205_REG_MUXCR,
+				   IT5205_POLARITY_INVERTED, 0);
+		break;
+	case TYPEC_ORIENTATION_REVERSE:
+		regmap_update_bits(it->regmap, IT5205_REG_MUXCR,
+				   IT5205_POLARITY_INVERTED, IT5205_POLARITY_INVERTED);
+		break;
+	case TYPEC_ORIENTATION_NONE:
+		fallthrough;
+	default:
+		regmap_write(it->regmap, IT5205_REG_MUXCR, 0);
+		break;
+	}
+
+	return 0;
+}
+
+static int it5205_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state)
+{
+	struct it5205 *it = typec_mux_get_drvdata(mux);
+	u8 val;
+
+	if (state->mode >= TYPEC_STATE_MODAL &&
+	    state->alt->svid != USB_TYPEC_DP_SID)
+		return -EINVAL;
+
+	switch (state->mode) {
+	case TYPEC_STATE_USB:
+		val = IT5205_USB;
+		break;
+	case TYPEC_DP_STATE_C:
+		fallthrough;
+	case TYPEC_DP_STATE_E:
+		val = IT5205_DP;
+		break;
+	case TYPEC_DP_STATE_D:
+		val = IT5205_DP_USB;
+		break;
+	case TYPEC_STATE_SAFE:
+		fallthrough;
+	default:
+		val = 0;
+		break;
+	}
+
+	return regmap_update_bits(it->regmap, IT5205_REG_MUXCR,
+				  IT5205_DP_USB_CTRL_MASK, val);
+}
+
+static irqreturn_t it5205_irq_handler(int irq, void *data)
+{
+	struct it5205 *it = data;
+	int ret;
+	u32 val;
+
+	ret = regmap_read(it->regmap, IT5205_REG_ISR, &val);
+	if (ret)
+		return IRQ_NONE;
+
+	if (val & IT5205_ISR_CSBU_OVP) {
+		dev_warn(&it->client->dev, "Overvoltage detected!\n");
+
+		/* Reset CSBU */
+		regmap_update_bits(it->regmap, IT5205_REG_CSBUSR,
+				   IT5205_CSBUSR_SWITCH, 0);
+		regmap_update_bits(it->regmap, IT5205_REG_CSBUSR,
+				   IT5205_CSBUSR_SWITCH, IT5205_CSBUSR_SWITCH);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void it5205_enable_ovp(struct it5205 *it)
+{
+	/* Select Vref 3.3v */
+	regmap_update_bits(it->regmap, IT5205_REG_VSR,
+			   IT5205_VREF_SELECT_MASK, IT5205_VREF_SELECT_3_3V);
+
+	/* Trigger OVP at 3.68V */
+	regmap_update_bits(it->regmap, IT5205_REG_CSBUOVPSR,
+			   IT5205_OVP_SELECT_MASK, IT5205_OVP_3_68V);
+
+	/* Unmask OVP interrupt */
+	regmap_update_bits(it->regmap, IT5205_REG_ISR,
+			   IT5205_ISR_CSBU_MASK, 0);
+
+	/* Enable CSBU Interrupt */
+	regmap_update_bits(it->regmap, IT5205_REG_CSBUSR,
+			   IT5205_CSBUSR_SWITCH, IT5205_CSBUSR_SWITCH);
+}
+
+static const struct regmap_config it5205_regmap = {
+	.max_register = 0x2f,
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int it5205_probe(struct i2c_client *client)
+{
+	struct typec_switch_desc sw_desc = { };
+	struct typec_mux_desc mux_desc = { };
+	struct device *dev = &client->dev;
+	struct it5205 *it;
+	u32 val, chipid = 0;
+	int i, ret;
+
+	it = devm_kzalloc(dev, sizeof(*it), GFP_KERNEL);
+	if (!it)
+		return -ENOMEM;
+
+	ret = devm_regulator_get_enable(dev, "vcc");
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get regulator\n");
+
+	it->client = client;
+
+	it->regmap = devm_regmap_init_i2c(client, &it5205_regmap);
+	if (IS_ERR(it->regmap))
+		return dev_err_probe(dev, PTR_ERR(it->regmap),
+				     "Failed to init regmap\n");
+
+	/* IT5205 needs a long time to power up after enabling regulator */
+	msleep(50);
+
+	/* Unset poweroff bit */
+	ret = regmap_write(it->regmap, IT5205_REG_MUXPDR, 0);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to set power on\n");
+
+	/* Read the 32 bits ChipID */
+	for (i = 3; i >= 0; i--) {
+		ret = regmap_read(it->regmap, IT5205_REG_CHIP_ID(i), &val);
+		if (ret)
+			return ret;
+
+		chipid |= val << (i * 8);
+	}
+
+	if (chipid != IT5205FN_CHIP_ID)
+		return dev_err_probe(dev, -EINVAL,
+				     "Unknown ChipID 0x%x\n", chipid);
+
+	/* Initialize as USB mode with default (non-inverted) polarity */
+	ret = regmap_write(it->regmap, IT5205_REG_MUXCR, IT5205_USB);
+	if (ret)
+		return dev_err_probe(dev, ret, "Cannot set mode to USB\n");
+
+	sw_desc.drvdata = it;
+	sw_desc.fwnode = dev_fwnode(dev);
+	sw_desc.set = it5205_switch_set;
+
+	it->sw = typec_switch_register(dev, &sw_desc);
+	if (IS_ERR(it->sw))
+		return dev_err_probe(dev, PTR_ERR(it->sw),
+				     "failed to register typec switch\n");
+
+	mux_desc.drvdata = it;
+	mux_desc.fwnode = dev_fwnode(dev);
+	mux_desc.set = it5205_mux_set;
+
+	it->mux = typec_mux_register(dev, &mux_desc);
+	if (IS_ERR(it->mux)) {
+		typec_switch_unregister(it->sw);
+		return dev_err_probe(dev, PTR_ERR(it->mux),
+				     "failed to register typec mux\n");
+	}
+
+	i2c_set_clientdata(client, it);
+
+	if (of_property_read_bool(dev->of_node, "ite,ovp-enable") && client->irq) {
+		it5205_enable_ovp(it);
+
+		ret = devm_request_threaded_irq(dev, client->irq, NULL,
+						it5205_irq_handler,
+						IRQF_ONESHOT, dev_name(dev), it);
+		if (ret) {
+			typec_mux_unregister(it->mux);
+			typec_switch_unregister(it->sw);
+			return dev_err_probe(dev, ret, "Failed to request irq\n");
+		}
+	}
+
+	return 0;
+}
+
+static void it5205_remove(struct i2c_client *client)
+{
+	struct it5205 *it = i2c_get_clientdata(client);
+
+	typec_mux_unregister(it->mux);
+	typec_switch_unregister(it->sw);
+}
+
+static const struct i2c_device_id it5205_table[] = {
+	{ "it5205" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, it5205_table);
+
+static const struct of_device_id it5205_of_table[] = {
+	{ .compatible = "ite,it5205" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, it5205_of_table);
+
+static struct i2c_driver it5205_driver = {
+	.driver = {
+		.name = "it5205",
+		.of_match_table = it5205_of_table,
+	},
+	.probe = it5205_probe,
+	.remove = it5205_remove,
+	.id_table = it5205_table,
+};
+module_i2c_driver(it5205_driver);
+
+MODULE_AUTHOR("Tianping Fang <tianping.fang@mediatek.com>");
+MODULE_AUTHOR("AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>");
+MODULE_DESCRIPTION("ITE IT5205 alternate mode passive MUX driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/typec/pd.c b/drivers/usb/typec/pd.c
index b9cca2be76..d78c04a421 100644
--- a/drivers/usb/typec/pd.c
+++ b/drivers/usb/typec/pd.c
@@ -157,7 +157,7 @@ static const struct attribute_group source_fixed_supply_group = {
 };
 __ATTRIBUTE_GROUPS(source_fixed_supply);
 
-static struct device_type source_fixed_supply_type = {
+static const struct device_type source_fixed_supply_type = {
 	.name = "pdo",
 	.release = pdo_release,
 	.groups = source_fixed_supply_groups,
@@ -182,7 +182,7 @@ static const struct attribute_group sink_fixed_supply_group = {
 };
 __ATTRIBUTE_GROUPS(sink_fixed_supply);
 
-static struct device_type sink_fixed_supply_type = {
+static const struct device_type sink_fixed_supply_type = {
 	.name = "pdo",
 	.release = pdo_release,
 	.groups = sink_fixed_supply_groups,
@@ -213,7 +213,7 @@ static struct attribute *source_variable_supply_attrs[] = {
 };
 ATTRIBUTE_GROUPS(source_variable_supply);
 
-static struct device_type source_variable_supply_type = {
+static const struct device_type source_variable_supply_type = {
 	.name = "pdo",
 	.release = pdo_release,
 	.groups = source_variable_supply_groups,
@@ -227,7 +227,7 @@ static struct attribute *sink_variable_supply_attrs[] = {
 };
 ATTRIBUTE_GROUPS(sink_variable_supply);
 
-static struct device_type sink_variable_supply_type = {
+static const struct device_type sink_variable_supply_type = {
 	.name = "pdo",
 	.release = pdo_release,
 	.groups = sink_variable_supply_groups,
@@ -258,7 +258,7 @@ static struct attribute *source_battery_attrs[] = {
 };
 ATTRIBUTE_GROUPS(source_battery);
 
-static struct device_type source_battery_type = {
+static const struct device_type source_battery_type = {
 	.name = "pdo",
 	.release = pdo_release,
 	.groups = source_battery_groups,
@@ -272,7 +272,7 @@ static struct attribute *sink_battery_attrs[] = {
 };
 ATTRIBUTE_GROUPS(sink_battery);
 
-static struct device_type sink_battery_type = {
+static const struct device_type sink_battery_type = {
 	.name = "pdo",
 	.release = pdo_release,
 	.groups = sink_battery_groups,
@@ -339,7 +339,7 @@ static struct attribute *source_pps_attrs[] = {
 };
 ATTRIBUTE_GROUPS(source_pps);
 
-static struct device_type source_pps_type = {
+static const struct device_type source_pps_type = {
 	.name = "pdo",
 	.release = pdo_release,
 	.groups = source_pps_groups,
@@ -353,7 +353,7 @@ static struct attribute *sink_pps_attrs[] = {
 };
 ATTRIBUTE_GROUPS(sink_pps);
 
-static struct device_type sink_pps_type = {
+static const struct device_type sink_pps_type = {
 	.name = "pdo",
 	.release = pdo_release,
 	.groups = sink_pps_groups,
@@ -371,30 +371,30 @@ static const char * const apdo_supply_name[] = {
 	[APDO_TYPE_PPS]  = "programmable_supply",
 };
 
-static struct device_type *source_type[] = {
+static const struct device_type *source_type[] = {
 	[PDO_TYPE_FIXED] = &source_fixed_supply_type,
 	[PDO_TYPE_BATT]  = &source_battery_type,
 	[PDO_TYPE_VAR]   = &source_variable_supply_type,
 };
 
-static struct device_type *source_apdo_type[] = {
+static const struct device_type *source_apdo_type[] = {
 	[APDO_TYPE_PPS]  = &source_pps_type,
 };
 
-static struct device_type *sink_type[] = {
+static const struct device_type *sink_type[] = {
 	[PDO_TYPE_FIXED] = &sink_fixed_supply_type,
 	[PDO_TYPE_BATT]  = &sink_battery_type,
 	[PDO_TYPE_VAR]   = &sink_variable_supply_type,
 };
 
-static struct device_type *sink_apdo_type[] = {
+static const struct device_type *sink_apdo_type[] = {
 	[APDO_TYPE_PPS]  = &sink_pps_type,
 };
 
 /* REVISIT: Export when EPR_*_Capabilities need to be supported. */
 static int add_pdo(struct usb_power_delivery_capabilities *cap, u32 pdo, int position)
 {
-	struct device_type *type;
+	const struct device_type *type;
 	const char *name;
 	struct pdo *p;
 	int ret;
@@ -460,7 +460,7 @@ static void pd_capabilities_release(struct device *dev)
 	kfree(to_usb_power_delivery_capabilities(dev));
 }
 
-static struct device_type pd_capabilities_type = {
+static const struct device_type pd_capabilities_type = {
 	.name = "capabilities",
 	.release = pd_capabilities_release,
 };
@@ -575,7 +575,7 @@ static void pd_release(struct device *dev)
 	kfree(pd);
 }
 
-static struct device_type pd_type = {
+static const struct device_type pd_type = {
 	.name = "usb_power_delivery",
 	.release = pd_release,
 	.groups = pd_groups,
diff --git a/drivers/usb/typec/retimer.c b/drivers/usb/typec/retimer.c
index 4a7d1b5c4d..b519fcf358 100644
--- a/drivers/usb/typec/retimer.c
+++ b/drivers/usb/typec/retimer.c
@@ -155,6 +155,6 @@ void *typec_retimer_get_drvdata(struct typec_retimer *retimer)
 }
 EXPORT_SYMBOL_GPL(typec_retimer_get_drvdata);
 
-struct class retimer_class = {
+const struct class retimer_class = {
 	.name = "retimer",
 };
diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c
index bc21006e97..ef18a448b7 100644
--- a/drivers/usb/typec/tcpm/fusb302.c
+++ b/drivers/usb/typec/tcpm/fusb302.c
@@ -1467,7 +1467,7 @@ static int fusb302_pd_read_message(struct fusb302_chip *chip,
 	if ((!len) && (pd_header_type_le(msg->header) == PD_CTRL_GOOD_CRC))
 		tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_SUCCESS);
 	else
-		tcpm_pd_receive(chip->tcpm_port, msg);
+		tcpm_pd_receive(chip->tcpm_port, msg, TCPC_TX_SOP);
 
 	return ret;
 }
diff --git a/drivers/usb/typec/tcpm/qcom/Makefile b/drivers/usb/typec/tcpm/qcom/Makefile
index dc1e8832e1..cc23042b94 100644
--- a/drivers/usb/typec/tcpm/qcom/Makefile
+++ b/drivers/usb/typec/tcpm/qcom/Makefile
@@ -3,4 +3,5 @@
 obj-$(CONFIG_TYPEC_QCOM_PMIC)		+= qcom_pmic_tcpm.o
 qcom_pmic_tcpm-y			+= qcom_pmic_typec.o \
 					   qcom_pmic_typec_port.o \
-					   qcom_pmic_typec_pdphy.o
+					   qcom_pmic_typec_pdphy.o \
+					   qcom_pmic_typec_pdphy_stub.o \
diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
index 1a2b4bddaa..501eddb294 100644
--- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
+++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
@@ -20,130 +20,15 @@
 
 #include <drm/bridge/aux-bridge.h>
 
+#include "qcom_pmic_typec.h"
 #include "qcom_pmic_typec_pdphy.h"
 #include "qcom_pmic_typec_port.h"
 
 struct pmic_typec_resources {
-	struct pmic_typec_pdphy_resources	*pdphy_res;
-	struct pmic_typec_port_resources	*port_res;
+	const struct pmic_typec_pdphy_resources	*pdphy_res;
+	const struct pmic_typec_port_resources	*port_res;
 };
 
-struct pmic_typec {
-	struct device		*dev;
-	struct tcpm_port	*tcpm_port;
-	struct tcpc_dev		tcpc;
-	struct pmic_typec_pdphy	*pmic_typec_pdphy;
-	struct pmic_typec_port	*pmic_typec_port;
-	bool			vbus_enabled;
-	struct mutex		lock;		/* VBUS state serialization */
-};
-
-#define tcpc_to_tcpm(_tcpc_) container_of(_tcpc_, struct pmic_typec, tcpc)
-
-static int qcom_pmic_typec_get_vbus(struct tcpc_dev *tcpc)
-{
-	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
-	int ret;
-
-	mutex_lock(&tcpm->lock);
-	ret = tcpm->vbus_enabled || qcom_pmic_typec_port_get_vbus(tcpm->pmic_typec_port);
-	mutex_unlock(&tcpm->lock);
-
-	return ret;
-}
-
-static int qcom_pmic_typec_set_vbus(struct tcpc_dev *tcpc, bool on, bool sink)
-{
-	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
-	int ret = 0;
-
-	mutex_lock(&tcpm->lock);
-	if (tcpm->vbus_enabled == on)
-		goto done;
-
-	ret = qcom_pmic_typec_port_set_vbus(tcpm->pmic_typec_port, on);
-	if (ret)
-		goto done;
-
-	tcpm->vbus_enabled = on;
-	tcpm_vbus_change(tcpm->tcpm_port);
-
-done:
-	dev_dbg(tcpm->dev, "set_vbus set: %d result %d\n", on, ret);
-	mutex_unlock(&tcpm->lock);
-
-	return ret;
-}
-
-static int qcom_pmic_typec_set_vconn(struct tcpc_dev *tcpc, bool on)
-{
-	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
-
-	return qcom_pmic_typec_port_set_vconn(tcpm->pmic_typec_port, on);
-}
-
-static int qcom_pmic_typec_get_cc(struct tcpc_dev *tcpc,
-				  enum typec_cc_status *cc1,
-				  enum typec_cc_status *cc2)
-{
-	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
-
-	return qcom_pmic_typec_port_get_cc(tcpm->pmic_typec_port, cc1, cc2);
-}
-
-static int qcom_pmic_typec_set_cc(struct tcpc_dev *tcpc,
-				  enum typec_cc_status cc)
-{
-	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
-
-	return qcom_pmic_typec_port_set_cc(tcpm->pmic_typec_port, cc);
-}
-
-static int qcom_pmic_typec_set_polarity(struct tcpc_dev *tcpc,
-					enum typec_cc_polarity pol)
-{
-	/* Polarity is set separately by phy-qcom-qmp.c */
-	return 0;
-}
-
-static int qcom_pmic_typec_start_toggling(struct tcpc_dev *tcpc,
-					  enum typec_port_type port_type,
-					  enum typec_cc_status cc)
-{
-	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
-
-	return qcom_pmic_typec_port_start_toggling(tcpm->pmic_typec_port,
-						   port_type, cc);
-}
-
-static int qcom_pmic_typec_set_roles(struct tcpc_dev *tcpc, bool attached,
-				     enum typec_role power_role,
-				     enum typec_data_role data_role)
-{
-	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
-
-	return qcom_pmic_typec_pdphy_set_roles(tcpm->pmic_typec_pdphy,
-					       data_role, power_role);
-}
-
-static int qcom_pmic_typec_set_pd_rx(struct tcpc_dev *tcpc, bool on)
-{
-	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
-
-	return qcom_pmic_typec_pdphy_set_pd_rx(tcpm->pmic_typec_pdphy, on);
-}
-
-static int qcom_pmic_typec_pd_transmit(struct tcpc_dev *tcpc,
-				       enum tcpm_transmit_type type,
-				       const struct pd_message *msg,
-				       unsigned int negotiated_rev)
-{
-	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
-
-	return qcom_pmic_typec_pdphy_pd_transmit(tcpm->pmic_typec_pdphy, type,
-						 msg, negotiated_rev);
-}
-
 static int qcom_pmic_typec_init(struct tcpc_dev *tcpc)
 {
 	return 0;
@@ -156,8 +41,8 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev)
 	struct device_node *np = dev->of_node;
 	const struct pmic_typec_resources *res;
 	struct regmap *regmap;
-	struct device *bridge_dev;
-	u32 base[2];
+	struct auxiliary_device *bridge_dev;
+	u32 base;
 	int ret;
 
 	res = of_device_get_match_data(dev);
@@ -170,16 +55,6 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev)
 
 	tcpm->dev = dev;
 	tcpm->tcpc.init = qcom_pmic_typec_init;
-	tcpm->tcpc.get_vbus = qcom_pmic_typec_get_vbus;
-	tcpm->tcpc.set_vbus = qcom_pmic_typec_set_vbus;
-	tcpm->tcpc.set_cc = qcom_pmic_typec_set_cc;
-	tcpm->tcpc.get_cc = qcom_pmic_typec_get_cc;
-	tcpm->tcpc.set_polarity = qcom_pmic_typec_set_polarity;
-	tcpm->tcpc.set_vconn = qcom_pmic_typec_set_vconn;
-	tcpm->tcpc.start_toggling = qcom_pmic_typec_start_toggling;
-	tcpm->tcpc.set_pd_rx = qcom_pmic_typec_set_pd_rx;
-	tcpm->tcpc.set_roles = qcom_pmic_typec_set_roles;
-	tcpm->tcpc.pd_transmit = qcom_pmic_typec_pd_transmit;
 
 	regmap = dev_get_regmap(dev->parent, NULL);
 	if (!regmap) {
@@ -187,36 +62,37 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	ret = of_property_read_u32_array(np, "reg", base, 2);
+	ret = of_property_read_u32_index(np, "reg", 0, &base);
 	if (ret)
 		return ret;
 
-	tcpm->pmic_typec_port = qcom_pmic_typec_port_alloc(dev);
-	if (IS_ERR(tcpm->pmic_typec_port))
-		return PTR_ERR(tcpm->pmic_typec_port);
-
-	tcpm->pmic_typec_pdphy = qcom_pmic_typec_pdphy_alloc(dev);
-	if (IS_ERR(tcpm->pmic_typec_pdphy))
-		return PTR_ERR(tcpm->pmic_typec_pdphy);
-
-	ret = qcom_pmic_typec_port_probe(pdev, tcpm->pmic_typec_port,
-					 res->port_res, regmap, base[0]);
+	ret = qcom_pmic_typec_port_probe(pdev, tcpm,
+					 res->port_res, regmap, base);
 	if (ret)
 		return ret;
 
-	ret = qcom_pmic_typec_pdphy_probe(pdev, tcpm->pmic_typec_pdphy,
-					  res->pdphy_res, regmap, base[1]);
-	if (ret)
-		return ret;
+	if (res->pdphy_res) {
+		ret = of_property_read_u32_index(np, "reg", 1, &base);
+		if (ret)
+			return ret;
+
+		ret = qcom_pmic_typec_pdphy_probe(pdev, tcpm,
+						  res->pdphy_res, regmap, base);
+		if (ret)
+			return ret;
+	} else {
+		ret = qcom_pmic_typec_pdphy_stub_probe(pdev, tcpm);
+		if (ret)
+			return ret;
+	}
 
-	mutex_init(&tcpm->lock);
 	platform_set_drvdata(pdev, tcpm);
 
 	tcpm->tcpc.fwnode = device_get_named_child_node(tcpm->dev, "connector");
 	if (!tcpm->tcpc.fwnode)
 		return -EINVAL;
 
-	bridge_dev = drm_dp_hpd_bridge_register(tcpm->dev, to_of_node(tcpm->tcpc.fwnode));
+	bridge_dev = devm_drm_dp_hpd_bridge_alloc(tcpm->dev, to_of_node(tcpm->tcpc.fwnode));
 	if (IS_ERR(bridge_dev))
 		return PTR_ERR(bridge_dev);
 
@@ -226,18 +102,26 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev)
 		goto fwnode_remove;
 	}
 
-	ret = qcom_pmic_typec_port_start(tcpm->pmic_typec_port,
-					 tcpm->tcpm_port);
+	ret = tcpm->port_start(tcpm, tcpm->tcpm_port);
 	if (ret)
-		goto fwnode_remove;
+		goto port_unregister;
 
-	ret = qcom_pmic_typec_pdphy_start(tcpm->pmic_typec_pdphy,
-					  tcpm->tcpm_port);
+	ret = tcpm->pdphy_start(tcpm, tcpm->tcpm_port);
 	if (ret)
-		goto fwnode_remove;
+		goto port_stop;
+
+	ret = devm_drm_dp_hpd_bridge_add(tcpm->dev, bridge_dev);
+	if (ret)
+		goto pdphy_stop;
 
 	return 0;
 
+pdphy_stop:
+	tcpm->pdphy_stop(tcpm);
+port_stop:
+	tcpm->port_stop(tcpm);
+port_unregister:
+	tcpm_unregister_port(tcpm->tcpm_port);
 fwnode_remove:
 	fwnode_remove_software_node(tcpm->tcpc.fwnode);
 
@@ -248,91 +132,25 @@ static void qcom_pmic_typec_remove(struct platform_device *pdev)
 {
 	struct pmic_typec *tcpm = platform_get_drvdata(pdev);
 
-	qcom_pmic_typec_pdphy_stop(tcpm->pmic_typec_pdphy);
-	qcom_pmic_typec_port_stop(tcpm->pmic_typec_port);
+	tcpm->pdphy_stop(tcpm);
+	tcpm->port_stop(tcpm);
 	tcpm_unregister_port(tcpm->tcpm_port);
 	fwnode_remove_software_node(tcpm->tcpc.fwnode);
 }
 
-static struct pmic_typec_pdphy_resources pm8150b_pdphy_res = {
-	.irq_params = {
-		{
-			.virq = PMIC_PDPHY_SIG_TX_IRQ,
-			.irq_name = "sig-tx",
-		},
-		{
-			.virq = PMIC_PDPHY_SIG_RX_IRQ,
-			.irq_name = "sig-rx",
-		},
-		{
-			.virq = PMIC_PDPHY_MSG_TX_IRQ,
-			.irq_name = "msg-tx",
-		},
-		{
-			.virq = PMIC_PDPHY_MSG_RX_IRQ,
-			.irq_name = "msg-rx",
-		},
-		{
-			.virq = PMIC_PDPHY_MSG_TX_FAIL_IRQ,
-			.irq_name = "msg-tx-failed",
-		},
-		{
-			.virq = PMIC_PDPHY_MSG_TX_DISCARD_IRQ,
-			.irq_name = "msg-tx-discarded",
-		},
-		{
-			.virq = PMIC_PDPHY_MSG_RX_DISCARD_IRQ,
-			.irq_name = "msg-rx-discarded",
-		},
-	},
-	.nr_irqs = 7,
-};
-
-static struct pmic_typec_port_resources pm8150b_port_res = {
-	.irq_params = {
-		{
-			.irq_name = "vpd-detect",
-			.virq = PMIC_TYPEC_VPD_IRQ,
-		},
-
-		{
-			.irq_name = "cc-state-change",
-			.virq = PMIC_TYPEC_CC_STATE_IRQ,
-		},
-		{
-			.irq_name = "vconn-oc",
-			.virq = PMIC_TYPEC_VCONN_OC_IRQ,
-		},
-
-		{
-			.irq_name = "vbus-change",
-			.virq = PMIC_TYPEC_VBUS_IRQ,
-		},
-
-		{
-			.irq_name = "attach-detach",
-			.virq = PMIC_TYPEC_ATTACH_DETACH_IRQ,
-		},
-		{
-			.irq_name = "legacy-cable-detect",
-			.virq = PMIC_TYPEC_LEGACY_CABLE_IRQ,
-		},
-
-		{
-			.irq_name = "try-snk-src-detect",
-			.virq = PMIC_TYPEC_TRY_SNK_SRC_IRQ,
-		},
-	},
-	.nr_irqs = 7,
+static const struct pmic_typec_resources pm8150b_typec_res = {
+	.pdphy_res = &pm8150b_pdphy_res,
+	.port_res = &pm8150b_port_res,
 };
 
-static struct pmic_typec_resources pm8150b_typec_res = {
-	.pdphy_res = &pm8150b_pdphy_res,
+static const struct pmic_typec_resources pmi632_typec_res = {
+	/* PD PHY not present */
 	.port_res = &pm8150b_port_res,
 };
 
 static const struct of_device_id qcom_pmic_typec_table[] = {
 	{ .compatible = "qcom,pm8150b-typec", .data = &pm8150b_typec_res },
+	{ .compatible = "qcom,pmi632-typec", .data = &pmi632_typec_res },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, qcom_pmic_typec_table);
diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.h b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.h
new file mode 100644
index 0000000000..3c75820c91
--- /dev/null
+++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.h
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023, Linaro Ltd. All rights reserved.
+ */
+
+#ifndef __QCOM_PMIC_TYPEC_H__
+#define __QCOM_PMIC_TYPEC_H__
+
+struct pmic_typec {
+	struct device		*dev;
+	struct tcpm_port	*tcpm_port;
+	struct tcpc_dev		tcpc;
+	struct pmic_typec_pdphy	*pmic_typec_pdphy;
+	struct pmic_typec_port	*pmic_typec_port;
+
+	int (*pdphy_start)(struct pmic_typec *tcpm,
+			   struct tcpm_port *tcpm_port);
+	void (*pdphy_stop)(struct pmic_typec *tcpm);
+
+	int (*port_start)(struct pmic_typec *tcpm,
+			  struct tcpm_port *tcpm_port);
+	void (*port_stop)(struct pmic_typec *tcpm);
+};
+
+#define tcpc_to_tcpm(_tcpc_) container_of(_tcpc_, struct pmic_typec, tcpc)
+
+#endif
diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c
index 52c81378e3..5b7f52b74a 100644
--- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c
+++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c
@@ -14,8 +14,74 @@
 #include <linux/slab.h>
 #include <linux/usb/pd.h>
 #include <linux/usb/tcpm.h>
+#include "qcom_pmic_typec.h"
 #include "qcom_pmic_typec_pdphy.h"
 
+/* PD PHY register offsets and bit fields */
+#define USB_PDPHY_MSG_CONFIG_REG	0x40
+#define MSG_CONFIG_PORT_DATA_ROLE	BIT(3)
+#define MSG_CONFIG_PORT_POWER_ROLE	BIT(2)
+#define MSG_CONFIG_SPEC_REV_MASK	(BIT(1) | BIT(0))
+
+#define USB_PDPHY_EN_CONTROL_REG	0x46
+#define CONTROL_ENABLE			BIT(0)
+
+#define USB_PDPHY_RX_STATUS_REG		0x4A
+#define RX_FRAME_TYPE			(BIT(0) | BIT(1) | BIT(2))
+
+#define USB_PDPHY_FRAME_FILTER_REG	0x4C
+#define FRAME_FILTER_EN_HARD_RESET	BIT(5)
+#define FRAME_FILTER_EN_SOP		BIT(0)
+
+#define USB_PDPHY_TX_SIZE_REG		0x42
+#define TX_SIZE_MASK			0xF
+
+#define USB_PDPHY_TX_CONTROL_REG	0x44
+#define TX_CONTROL_RETRY_COUNT(n)	(((n) & 0x3) << 5)
+#define TX_CONTROL_FRAME_TYPE(n)        (((n) & 0x7) << 2)
+#define TX_CONTROL_FRAME_TYPE_CABLE_RESET	(0x1 << 2)
+#define TX_CONTROL_SEND_SIGNAL		BIT(1)
+#define TX_CONTROL_SEND_MSG		BIT(0)
+
+#define USB_PDPHY_RX_SIZE_REG		0x48
+
+#define USB_PDPHY_RX_ACKNOWLEDGE_REG	0x4B
+#define RX_BUFFER_TOKEN			BIT(0)
+
+#define USB_PDPHY_BIST_MODE_REG		0x4E
+#define BIST_MODE_MASK			0xF
+#define BIST_ENABLE			BIT(7)
+#define PD_MSG_BIST			0x3
+#define PD_BIST_TEST_DATA_MODE		0x8
+
+#define USB_PDPHY_TX_BUFFER_HDR_REG	0x60
+#define USB_PDPHY_TX_BUFFER_DATA_REG	0x62
+
+#define USB_PDPHY_RX_BUFFER_REG		0x80
+
+/* VDD regulator */
+#define VDD_PDPHY_VOL_MIN		2800000	/* uV */
+#define VDD_PDPHY_VOL_MAX		3300000	/* uV */
+#define VDD_PDPHY_HPM_LOAD		3000	/* uA */
+
+/* Message Spec Rev field */
+#define PD_MSG_HDR_REV(hdr)		(((hdr) >> 6) & 3)
+
+/* timers */
+#define RECEIVER_RESPONSE_TIME		15	/* tReceiverResponse */
+#define HARD_RESET_COMPLETE_TIME	5	/* tHardResetComplete */
+
+/* Interrupt numbers */
+#define PMIC_PDPHY_SIG_TX_IRQ		0x0
+#define PMIC_PDPHY_SIG_RX_IRQ		0x1
+#define PMIC_PDPHY_MSG_TX_IRQ		0x2
+#define PMIC_PDPHY_MSG_RX_IRQ		0x3
+#define PMIC_PDPHY_MSG_TX_FAIL_IRQ	0x4
+#define PMIC_PDPHY_MSG_TX_DISCARD_IRQ	0x5
+#define PMIC_PDPHY_MSG_RX_DISCARD_IRQ	0x6
+#define PMIC_PDPHY_FR_SWAP_IRQ		0x7
+
+
 struct pmic_typec_pdphy_irq_data {
 	int				virq;
 	int				irq;
@@ -231,11 +297,13 @@ done:
 	return ret;
 }
 
-int qcom_pmic_typec_pdphy_pd_transmit(struct pmic_typec_pdphy *pmic_typec_pdphy,
-				      enum tcpm_transmit_type type,
-				      const struct pd_message *msg,
-				      unsigned int negotiated_rev)
+static int qcom_pmic_typec_pdphy_pd_transmit(struct tcpc_dev *tcpc,
+					     enum tcpm_transmit_type type,
+					     const struct pd_message *msg,
+					     unsigned int negotiated_rev)
 {
+	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
+	struct pmic_typec_pdphy *pmic_typec_pdphy = tcpm->pmic_typec_pdphy;
 	struct device *dev = pmic_typec_pdphy->dev;
 	int ret;
 
@@ -299,7 +367,7 @@ done:
 
 	if (!ret) {
 		dev_vdbg(dev, "pd_receive: handing %d bytes to tcpm\n", size);
-		tcpm_pd_receive(pmic_typec_pdphy->tcpm_port, &msg);
+		tcpm_pd_receive(pmic_typec_pdphy->tcpm_port, &msg, TCPC_TX_SOP);
 	}
 }
 
@@ -336,8 +404,10 @@ static irqreturn_t qcom_pmic_typec_pdphy_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-int qcom_pmic_typec_pdphy_set_pd_rx(struct pmic_typec_pdphy *pmic_typec_pdphy, bool on)
+static int qcom_pmic_typec_pdphy_set_pd_rx(struct tcpc_dev *tcpc, bool on)
 {
+	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
+	struct pmic_typec_pdphy *pmic_typec_pdphy = tcpm->pmic_typec_pdphy;
 	unsigned long flags;
 	int ret;
 
@@ -353,9 +423,12 @@ int qcom_pmic_typec_pdphy_set_pd_rx(struct pmic_typec_pdphy *pmic_typec_pdphy, b
 	return ret;
 }
 
-int qcom_pmic_typec_pdphy_set_roles(struct pmic_typec_pdphy *pmic_typec_pdphy,
-				    bool data_role_host, bool power_role_src)
+static int qcom_pmic_typec_pdphy_set_roles(struct tcpc_dev *tcpc, bool attached,
+					   enum typec_role power_role,
+					   enum typec_data_role data_role)
 {
+	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
+	struct pmic_typec_pdphy *pmic_typec_pdphy = tcpm->pmic_typec_pdphy;
 	struct device *dev = pmic_typec_pdphy->dev;
 	unsigned long flags;
 	int ret;
@@ -366,12 +439,13 @@ int qcom_pmic_typec_pdphy_set_roles(struct pmic_typec_pdphy *pmic_typec_pdphy,
 				 pmic_typec_pdphy->base + USB_PDPHY_MSG_CONFIG_REG,
 				 MSG_CONFIG_PORT_DATA_ROLE |
 				 MSG_CONFIG_PORT_POWER_ROLE,
-				 data_role_host << 3 | power_role_src << 2);
+				 (data_role == TYPEC_HOST ? MSG_CONFIG_PORT_DATA_ROLE : 0) |
+				 (power_role == TYPEC_SOURCE ? MSG_CONFIG_PORT_POWER_ROLE : 0));
 
 	spin_unlock_irqrestore(&pmic_typec_pdphy->lock, flags);
 
 	dev_dbg(dev, "pdphy_set_roles: data_role_host=%d power_role_src=%d\n",
-		data_role_host, power_role_src);
+		data_role, power_role);
 
 	return ret;
 }
@@ -401,10 +475,8 @@ static int qcom_pmic_typec_pdphy_enable(struct pmic_typec_pdphy *pmic_typec_pdph
 
 	qcom_pmic_typec_pdphy_reset_off(pmic_typec_pdphy);
 done:
-	if (ret) {
-		regulator_disable(pmic_typec_pdphy->vdd_pdphy);
+	if (ret)
 		dev_err(dev, "pdphy_enable fail %d\n", ret);
-	}
 
 	return ret;
 }
@@ -435,9 +507,10 @@ done:
 	return ret;
 }
 
-int qcom_pmic_typec_pdphy_start(struct pmic_typec_pdphy *pmic_typec_pdphy,
-				struct tcpm_port *tcpm_port)
+static int qcom_pmic_typec_pdphy_start(struct pmic_typec *tcpm,
+				       struct tcpm_port *tcpm_port)
 {
+	struct pmic_typec_pdphy *pmic_typec_pdphy = tcpm->pmic_typec_pdphy;
 	int i;
 	int ret;
 
@@ -449,16 +522,22 @@ int qcom_pmic_typec_pdphy_start(struct pmic_typec_pdphy *pmic_typec_pdphy,
 
 	ret = pmic_typec_pdphy_reset(pmic_typec_pdphy);
 	if (ret)
-		return ret;
+		goto err_disable_vdd_pdhy;
 
 	for (i = 0; i < pmic_typec_pdphy->nr_irqs; i++)
 		enable_irq(pmic_typec_pdphy->irq_data[i].irq);
 
 	return 0;
+
+err_disable_vdd_pdhy:
+	regulator_disable(pmic_typec_pdphy->vdd_pdphy);
+
+	return ret;
 }
 
-void qcom_pmic_typec_pdphy_stop(struct pmic_typec_pdphy *pmic_typec_pdphy)
+static void qcom_pmic_typec_pdphy_stop(struct pmic_typec *tcpm)
 {
+	struct pmic_typec_pdphy *pmic_typec_pdphy = tcpm->pmic_typec_pdphy;
 	int i;
 
 	for (i = 0; i < pmic_typec_pdphy->nr_irqs; i++)
@@ -469,21 +548,21 @@ void qcom_pmic_typec_pdphy_stop(struct pmic_typec_pdphy *pmic_typec_pdphy)
 	regulator_disable(pmic_typec_pdphy->vdd_pdphy);
 }
 
-struct pmic_typec_pdphy *qcom_pmic_typec_pdphy_alloc(struct device *dev)
-{
-	return devm_kzalloc(dev, sizeof(struct pmic_typec_pdphy), GFP_KERNEL);
-}
-
 int qcom_pmic_typec_pdphy_probe(struct platform_device *pdev,
-				struct pmic_typec_pdphy *pmic_typec_pdphy,
-				struct pmic_typec_pdphy_resources *res,
+				struct pmic_typec *tcpm,
+				const struct pmic_typec_pdphy_resources *res,
 				struct regmap *regmap,
 				u32 base)
 {
+	struct pmic_typec_pdphy *pmic_typec_pdphy;
 	struct device *dev = &pdev->dev;
 	struct pmic_typec_pdphy_irq_data *irq_data;
 	int i, ret, irq;
 
+	pmic_typec_pdphy = devm_kzalloc(dev, sizeof(*pmic_typec_pdphy), GFP_KERNEL);
+	if (!pmic_typec_pdphy)
+		return -ENOMEM;
+
 	if (!res->nr_irqs || res->nr_irqs > PMIC_PDPHY_MAX_IRQS)
 		return -EINVAL;
 
@@ -522,5 +601,48 @@ int qcom_pmic_typec_pdphy_probe(struct platform_device *pdev,
 			return ret;
 	}
 
+	tcpm->pmic_typec_pdphy = pmic_typec_pdphy;
+
+	tcpm->tcpc.set_pd_rx = qcom_pmic_typec_pdphy_set_pd_rx;
+	tcpm->tcpc.set_roles = qcom_pmic_typec_pdphy_set_roles;
+	tcpm->tcpc.pd_transmit = qcom_pmic_typec_pdphy_pd_transmit;
+
+	tcpm->pdphy_start = qcom_pmic_typec_pdphy_start;
+	tcpm->pdphy_stop = qcom_pmic_typec_pdphy_stop;
+
 	return 0;
 }
+
+const struct pmic_typec_pdphy_resources pm8150b_pdphy_res = {
+	.irq_params = {
+		{
+			.virq = PMIC_PDPHY_SIG_TX_IRQ,
+			.irq_name = "sig-tx",
+		},
+		{
+			.virq = PMIC_PDPHY_SIG_RX_IRQ,
+			.irq_name = "sig-rx",
+		},
+		{
+			.virq = PMIC_PDPHY_MSG_TX_IRQ,
+			.irq_name = "msg-tx",
+		},
+		{
+			.virq = PMIC_PDPHY_MSG_RX_IRQ,
+			.irq_name = "msg-rx",
+		},
+		{
+			.virq = PMIC_PDPHY_MSG_TX_FAIL_IRQ,
+			.irq_name = "msg-tx-failed",
+		},
+		{
+			.virq = PMIC_PDPHY_MSG_TX_DISCARD_IRQ,
+			.irq_name = "msg-tx-discarded",
+		},
+		{
+			.virq = PMIC_PDPHY_MSG_RX_DISCARD_IRQ,
+			.irq_name = "msg-rx-discarded",
+		},
+	},
+	.nr_irqs = 7,
+};
diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.h b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.h
index e67954e31b..04dee20293 100644
--- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.h
+++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.h
@@ -8,74 +8,6 @@
 
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
-#include <linux/usb/tcpm.h>
-
-#define USB_PDPHY_MAX_DATA_OBJ_LEN	28
-#define USB_PDPHY_MSG_HDR_LEN		2
-
-/* PD PHY register offsets and bit fields */
-#define USB_PDPHY_MSG_CONFIG_REG	0x40
-#define MSG_CONFIG_PORT_DATA_ROLE	BIT(3)
-#define MSG_CONFIG_PORT_POWER_ROLE	BIT(2)
-#define MSG_CONFIG_SPEC_REV_MASK	(BIT(1) | BIT(0))
-
-#define USB_PDPHY_EN_CONTROL_REG	0x46
-#define CONTROL_ENABLE			BIT(0)
-
-#define USB_PDPHY_RX_STATUS_REG		0x4A
-#define RX_FRAME_TYPE			(BIT(0) | BIT(1) | BIT(2))
-
-#define USB_PDPHY_FRAME_FILTER_REG	0x4C
-#define FRAME_FILTER_EN_HARD_RESET	BIT(5)
-#define FRAME_FILTER_EN_SOP		BIT(0)
-
-#define USB_PDPHY_TX_SIZE_REG		0x42
-#define TX_SIZE_MASK			0xF
-
-#define USB_PDPHY_TX_CONTROL_REG	0x44
-#define TX_CONTROL_RETRY_COUNT(n)	(((n) & 0x3) << 5)
-#define TX_CONTROL_FRAME_TYPE(n)        (((n) & 0x7) << 2)
-#define TX_CONTROL_FRAME_TYPE_CABLE_RESET	(0x1 << 2)
-#define TX_CONTROL_SEND_SIGNAL		BIT(1)
-#define TX_CONTROL_SEND_MSG		BIT(0)
-
-#define USB_PDPHY_RX_SIZE_REG		0x48
-
-#define USB_PDPHY_RX_ACKNOWLEDGE_REG	0x4B
-#define RX_BUFFER_TOKEN			BIT(0)
-
-#define USB_PDPHY_BIST_MODE_REG		0x4E
-#define BIST_MODE_MASK			0xF
-#define BIST_ENABLE			BIT(7)
-#define PD_MSG_BIST			0x3
-#define PD_BIST_TEST_DATA_MODE		0x8
-
-#define USB_PDPHY_TX_BUFFER_HDR_REG	0x60
-#define USB_PDPHY_TX_BUFFER_DATA_REG	0x62
-
-#define USB_PDPHY_RX_BUFFER_REG		0x80
-
-/* VDD regulator */
-#define VDD_PDPHY_VOL_MIN		2800000	/* uV */
-#define VDD_PDPHY_VOL_MAX		3300000	/* uV */
-#define VDD_PDPHY_HPM_LOAD		3000	/* uA */
-
-/* Message Spec Rev field */
-#define PD_MSG_HDR_REV(hdr)		(((hdr) >> 6) & 3)
-
-/* timers */
-#define RECEIVER_RESPONSE_TIME		15	/* tReceiverResponse */
-#define HARD_RESET_COMPLETE_TIME	5	/* tHardResetComplete */
-
-/* Interrupt numbers */
-#define PMIC_PDPHY_SIG_TX_IRQ		0x0
-#define PMIC_PDPHY_SIG_RX_IRQ		0x1
-#define PMIC_PDPHY_MSG_TX_IRQ		0x2
-#define PMIC_PDPHY_MSG_RX_IRQ		0x3
-#define PMIC_PDPHY_MSG_TX_FAIL_IRQ	0x4
-#define PMIC_PDPHY_MSG_TX_DISCARD_IRQ	0x5
-#define PMIC_PDPHY_MSG_RX_DISCARD_IRQ	0x6
-#define PMIC_PDPHY_FR_SWAP_IRQ		0x7
 
 /* Resources */
 #define PMIC_PDPHY_MAX_IRQS		0x08
@@ -87,33 +19,19 @@ struct pmic_typec_pdphy_irq_params {
 
 struct pmic_typec_pdphy_resources {
 	unsigned int				nr_irqs;
-	struct pmic_typec_pdphy_irq_params	irq_params[PMIC_PDPHY_MAX_IRQS];
+	const struct pmic_typec_pdphy_irq_params	irq_params[PMIC_PDPHY_MAX_IRQS];
 };
 
 /* API */
 struct pmic_typec_pdphy;
 
-struct pmic_typec_pdphy *qcom_pmic_typec_pdphy_alloc(struct device *dev);
-
+extern const struct pmic_typec_pdphy_resources pm8150b_pdphy_res;
 int qcom_pmic_typec_pdphy_probe(struct platform_device *pdev,
-				struct pmic_typec_pdphy *pmic_typec_pdphy,
-				struct pmic_typec_pdphy_resources *res,
+				struct pmic_typec *tcpm,
+				const struct pmic_typec_pdphy_resources *res,
 				struct regmap *regmap,
 				u32 base);
-
-int qcom_pmic_typec_pdphy_start(struct pmic_typec_pdphy *pmic_typec_pdphy,
-				struct tcpm_port *tcpm_port);
-
-void qcom_pmic_typec_pdphy_stop(struct pmic_typec_pdphy *pmic_typec_pdphy);
-
-int qcom_pmic_typec_pdphy_set_roles(struct pmic_typec_pdphy *pmic_typec_pdphy,
-				    bool power_role_src, bool data_role_host);
-
-int qcom_pmic_typec_pdphy_set_pd_rx(struct pmic_typec_pdphy *pmic_typec_pdphy, bool on);
-
-int qcom_pmic_typec_pdphy_pd_transmit(struct pmic_typec_pdphy *pmic_typec_pdphy,
-				      enum tcpm_transmit_type type,
-				      const struct pd_message *msg,
-				      unsigned int negotiated_rev);
+int qcom_pmic_typec_pdphy_stub_probe(struct platform_device *pdev,
+				     struct pmic_typec *tcpm);
 
 #endif /* __QCOM_PMIC_TYPEC_PDPHY_H__ */
diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy_stub.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy_stub.c
new file mode 100644
index 0000000000..df79059cda
--- /dev/null
+++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy_stub.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024, Linaro Ltd. All rights reserved.
+ */
+
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/usb/pd.h>
+#include <linux/usb/tcpm.h>
+#include "qcom_pmic_typec.h"
+#include "qcom_pmic_typec_pdphy.h"
+
+static int qcom_pmic_typec_pdphy_stub_pd_transmit(struct tcpc_dev *tcpc,
+						  enum tcpm_transmit_type type,
+						  const struct pd_message *msg,
+						  unsigned int negotiated_rev)
+{
+	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
+	struct device *dev = tcpm->dev;
+
+	dev_dbg(dev, "pdphy_transmit: type=%d\n", type);
+
+	tcpm_pd_transmit_complete(tcpm->tcpm_port,
+				  TCPC_TX_SUCCESS);
+
+	return 0;
+}
+
+static int qcom_pmic_typec_pdphy_stub_set_pd_rx(struct tcpc_dev *tcpc, bool on)
+{
+	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
+	struct device *dev = tcpm->dev;
+
+	dev_dbg(dev, "set_pd_rx: %s\n", on ? "on" : "off");
+
+	return 0;
+}
+
+static int qcom_pmic_typec_pdphy_stub_set_roles(struct tcpc_dev *tcpc, bool attached,
+						enum typec_role power_role,
+						enum typec_data_role data_role)
+{
+	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
+	struct device *dev = tcpm->dev;
+
+	dev_dbg(dev, "pdphy_set_roles: data_role_host=%d power_role_src=%d\n",
+		data_role, power_role);
+
+	return 0;
+}
+
+static int qcom_pmic_typec_pdphy_stub_start(struct pmic_typec *tcpm,
+					    struct tcpm_port *tcpm_port)
+{
+	return 0;
+}
+
+static void qcom_pmic_typec_pdphy_stub_stop(struct pmic_typec *tcpm)
+{
+}
+
+int qcom_pmic_typec_pdphy_stub_probe(struct platform_device *pdev,
+				     struct pmic_typec *tcpm)
+{
+	tcpm->tcpc.set_pd_rx = qcom_pmic_typec_pdphy_stub_set_pd_rx;
+	tcpm->tcpc.set_roles = qcom_pmic_typec_pdphy_stub_set_roles;
+	tcpm->tcpc.pd_transmit = qcom_pmic_typec_pdphy_stub_pd_transmit;
+
+	tcpm->pdphy_start = qcom_pmic_typec_pdphy_stub_start;
+	tcpm->pdphy_stop = qcom_pmic_typec_pdphy_stub_stop;
+
+	return 0;
+}
diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.c
index a8f3f4d3a4..a747baa297 100644
--- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.c
+++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.c
@@ -16,8 +16,147 @@
 #include <linux/usb/tcpm.h>
 #include <linux/usb/typec_mux.h>
 #include <linux/workqueue.h>
+
+#include "qcom_pmic_typec.h"
 #include "qcom_pmic_typec_port.h"
 
+#define TYPEC_SNK_STATUS_REG				0x06
+#define DETECTED_SNK_TYPE_MASK				GENMASK(6, 0)
+#define SNK_DAM_MASK					GENMASK(6, 4)
+#define SNK_DAM_500MA					BIT(6)
+#define SNK_DAM_1500MA					BIT(5)
+#define SNK_DAM_3000MA					BIT(4)
+#define SNK_RP_STD					BIT(3)
+#define SNK_RP_1P5					BIT(2)
+#define SNK_RP_3P0					BIT(1)
+#define SNK_RP_SHORT					BIT(0)
+
+#define TYPEC_SRC_STATUS_REG				0x08
+#define DETECTED_SRC_TYPE_MASK				GENMASK(4, 0)
+#define SRC_HIGH_BATT					BIT(5)
+#define SRC_DEBUG_ACCESS				BIT(4)
+#define SRC_RD_OPEN					BIT(3)
+#define SRC_RD_RA_VCONN					BIT(2)
+#define SRC_RA_OPEN					BIT(1)
+#define AUDIO_ACCESS_RA_RA				BIT(0)
+
+#define TYPEC_STATE_MACHINE_STATUS_REG			0x09
+#define TYPEC_ATTACH_DETACH_STATE			BIT(5)
+
+#define TYPEC_SM_STATUS_REG				0x0A
+#define TYPEC_SM_VBUS_VSAFE5V				BIT(5)
+#define TYPEC_SM_VBUS_VSAFE0V				BIT(6)
+#define TYPEC_SM_USBIN_LT_LV				BIT(7)
+
+#define TYPEC_MISC_STATUS_REG				0x0B
+#define TYPEC_WATER_DETECTION_STATUS			BIT(7)
+#define SNK_SRC_MODE					BIT(6)
+#define TYPEC_VBUS_DETECT				BIT(5)
+#define TYPEC_VBUS_ERROR_STATUS				BIT(4)
+#define TYPEC_DEBOUNCE_DONE				BIT(3)
+#define CC_ORIENTATION					BIT(1)
+#define CC_ATTACHED					BIT(0)
+
+#define LEGACY_CABLE_STATUS_REG				0x0D
+#define TYPEC_LEGACY_CABLE_STATUS			BIT(1)
+#define TYPEC_NONCOMP_LEGACY_CABLE_STATUS		BIT(0)
+
+#define TYPEC_U_USB_STATUS_REG				0x0F
+#define U_USB_GROUND_NOVBUS				BIT(6)
+#define U_USB_GROUND					BIT(4)
+#define U_USB_FMB1					BIT(3)
+#define U_USB_FLOAT1					BIT(2)
+#define U_USB_FMB2					BIT(1)
+#define U_USB_FLOAT2					BIT(0)
+
+#define TYPEC_MODE_CFG_REG				0x44
+#define TYPEC_TRY_MODE_MASK				GENMASK(4, 3)
+#define EN_TRY_SNK					BIT(4)
+#define EN_TRY_SRC					BIT(3)
+#define TYPEC_POWER_ROLE_CMD_MASK			GENMASK(2, 0)
+#define EN_SRC_ONLY					BIT(2)
+#define EN_SNK_ONLY					BIT(1)
+#define TYPEC_DISABLE_CMD				BIT(0)
+
+#define TYPEC_VCONN_CONTROL_REG				0x46
+#define VCONN_EN_ORIENTATION				BIT(2)
+#define VCONN_EN_VALUE					BIT(1)
+#define VCONN_EN_SRC					BIT(0)
+
+#define TYPEC_CCOUT_CONTROL_REG				0x48
+#define TYPEC_CCOUT_BUFFER_EN				BIT(2)
+#define TYPEC_CCOUT_VALUE				BIT(1)
+#define TYPEC_CCOUT_SRC					BIT(0)
+
+#define DEBUG_ACCESS_SRC_CFG_REG			0x4C
+#define EN_UNORIENTED_DEBUG_ACCESS_SRC			BIT(0)
+
+#define TYPE_C_CRUDE_SENSOR_CFG_REG			0x4e
+#define EN_SRC_CRUDE_SENSOR				BIT(1)
+#define EN_SNK_CRUDE_SENSOR				BIT(0)
+
+#define TYPEC_EXIT_STATE_CFG_REG			0x50
+#define BYPASS_VSAFE0V_DURING_ROLE_SWAP			BIT(3)
+#define SEL_SRC_UPPER_REF				BIT(2)
+#define USE_TPD_FOR_EXITING_ATTACHSRC			BIT(1)
+#define EXIT_SNK_BASED_ON_CC				BIT(0)
+
+#define TYPEC_CURRSRC_CFG_REG				0x52
+#define TYPEC_SRC_RP_SEL_330UA				BIT(1)
+#define TYPEC_SRC_RP_SEL_180UA				BIT(0)
+#define TYPEC_SRC_RP_SEL_80UA				0
+#define TYPEC_SRC_RP_SEL_MASK				GENMASK(1, 0)
+
+#define TYPEC_INTERRUPT_EN_CFG_1_REG			0x5E
+#define TYPEC_LEGACY_CABLE_INT_EN			BIT(7)
+#define TYPEC_NONCOMPLIANT_LEGACY_CABLE_INT_EN		BIT(6)
+#define TYPEC_TRYSOURCE_DETECT_INT_EN			BIT(5)
+#define TYPEC_TRYSINK_DETECT_INT_EN			BIT(4)
+#define TYPEC_CCOUT_DETACH_INT_EN			BIT(3)
+#define TYPEC_CCOUT_ATTACH_INT_EN			BIT(2)
+#define TYPEC_VBUS_DEASSERT_INT_EN			BIT(1)
+#define TYPEC_VBUS_ASSERT_INT_EN			BIT(0)
+
+#define TYPEC_INTERRUPT_EN_CFG_2_REG			0x60
+#define TYPEC_SRC_BATT_HPWR_INT_EN			BIT(6)
+#define MICRO_USB_STATE_CHANGE_INT_EN			BIT(5)
+#define TYPEC_STATE_MACHINE_CHANGE_INT_EN		BIT(4)
+#define TYPEC_DEBUG_ACCESS_DETECT_INT_EN		BIT(3)
+#define TYPEC_WATER_DETECTION_INT_EN			BIT(2)
+#define TYPEC_VBUS_ERROR_INT_EN				BIT(1)
+#define TYPEC_DEBOUNCE_DONE_INT_EN			BIT(0)
+
+#define TYPEC_DEBOUNCE_OPTION_REG			0x62
+#define REDUCE_TCCDEBOUNCE_TO_2MS			BIT(2)
+
+#define TYPE_C_SBU_CFG_REG				0x6A
+#define SEL_SBU1_ISRC_VAL				0x04
+#define SEL_SBU2_ISRC_VAL				0x01
+
+#define TYPEC_U_USB_CFG_REG				0x70
+#define EN_MICRO_USB_FACTORY_MODE			BIT(1)
+#define EN_MICRO_USB_MODE				BIT(0)
+
+#define TYPEC_PMI632_U_USB_WATER_PROTECTION_CFG_REG	0x72
+
+#define TYPEC_U_USB_WATER_PROTECTION_CFG_REG		0x73
+#define EN_MICRO_USB_WATER_PROTECTION			BIT(4)
+#define MICRO_USB_DETECTION_ON_TIME_CFG_MASK		GENMASK(3, 2)
+#define MICRO_USB_DETECTION_PERIOD_CFG_MASK		GENMASK(1, 0)
+
+#define TYPEC_PMI632_MICRO_USB_MODE_REG			0x73
+#define MICRO_USB_MODE_ONLY				BIT(0)
+
+/* Interrupt numbers */
+#define PMIC_TYPEC_OR_RID_IRQ				0x0
+#define PMIC_TYPEC_VPD_IRQ				0x1
+#define PMIC_TYPEC_CC_STATE_IRQ				0x2
+#define PMIC_TYPEC_VCONN_OC_IRQ				0x3
+#define PMIC_TYPEC_VBUS_IRQ				0x4
+#define PMIC_TYPEC_ATTACH_DETACH_IRQ			0x5
+#define PMIC_TYPEC_LEGACY_CABLE_IRQ			0x6
+#define PMIC_TYPEC_TRY_SNK_SRC_IRQ			0x7
+
 struct pmic_typec_port_irq_data {
 	int				virq;
 	int				irq;
@@ -33,6 +172,8 @@ struct pmic_typec_port {
 	struct pmic_typec_port_irq_data	*irq_data;
 
 	struct regulator		*vdd_vbus;
+	bool				vbus_enabled;
+	struct mutex			vbus_lock;		/* VBUS state serialization */
 
 	int				cc;
 	bool				debouncing_cc;
@@ -131,7 +272,7 @@ done:
 	return IRQ_HANDLED;
 }
 
-int qcom_pmic_typec_port_get_vbus(struct pmic_typec_port *pmic_typec_port)
+static int qcom_pmic_typec_port_vbus_detect(struct pmic_typec_port *pmic_typec_port)
 {
 	struct device *dev = pmic_typec_port->dev;
 	unsigned int misc;
@@ -148,7 +289,7 @@ int qcom_pmic_typec_port_get_vbus(struct pmic_typec_port *pmic_typec_port)
 	return !!(misc & TYPEC_VBUS_DETECT);
 }
 
-int qcom_pmic_typec_port_set_vbus(struct pmic_typec_port *pmic_typec_port, bool on)
+static int qcom_pmic_typec_port_vbus_toggle(struct pmic_typec_port *pmic_typec_port, bool on)
 {
 	u32 sm_stat;
 	u32 val;
@@ -179,10 +320,49 @@ int qcom_pmic_typec_port_set_vbus(struct pmic_typec_port *pmic_typec_port, bool
 	return 0;
 }
 
-int qcom_pmic_typec_port_get_cc(struct pmic_typec_port *pmic_typec_port,
-				enum typec_cc_status *cc1,
-				enum typec_cc_status *cc2)
+static int qcom_pmic_typec_port_get_vbus(struct tcpc_dev *tcpc)
+{
+	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
+	struct pmic_typec_port *pmic_typec_port = tcpm->pmic_typec_port;
+	int ret;
+
+	mutex_lock(&pmic_typec_port->vbus_lock);
+	ret = pmic_typec_port->vbus_enabled || qcom_pmic_typec_port_vbus_detect(pmic_typec_port);
+	mutex_unlock(&pmic_typec_port->vbus_lock);
+
+	return ret;
+}
+
+static int qcom_pmic_typec_port_set_vbus(struct tcpc_dev *tcpc, bool on, bool sink)
+{
+	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
+	struct pmic_typec_port *pmic_typec_port = tcpm->pmic_typec_port;
+	int ret = 0;
+
+	mutex_lock(&pmic_typec_port->vbus_lock);
+	if (pmic_typec_port->vbus_enabled == on)
+		goto done;
+
+	ret = qcom_pmic_typec_port_vbus_toggle(pmic_typec_port, on);
+	if (ret)
+		goto done;
+
+	pmic_typec_port->vbus_enabled = on;
+	tcpm_vbus_change(tcpm->tcpm_port);
+
+done:
+	dev_dbg(tcpm->dev, "set_vbus set: %d result %d\n", on, ret);
+	mutex_unlock(&pmic_typec_port->vbus_lock);
+
+	return ret;
+}
+
+static int qcom_pmic_typec_port_get_cc(struct tcpc_dev *tcpc,
+				       enum typec_cc_status *cc1,
+				       enum typec_cc_status *cc2)
 {
+	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
+	struct pmic_typec_port *pmic_typec_port = tcpm->pmic_typec_port;
 	struct device *dev = pmic_typec_port->dev;
 	unsigned int misc, val;
 	bool attached;
@@ -275,9 +455,11 @@ static void qcom_pmic_set_cc_debounce(struct pmic_typec_port *pmic_typec_port)
 			      msecs_to_jiffies(2));
 }
 
-int qcom_pmic_typec_port_set_cc(struct pmic_typec_port *pmic_typec_port,
-				enum typec_cc_status cc)
+static int qcom_pmic_typec_port_set_cc(struct tcpc_dev *tcpc,
+				       enum typec_cc_status cc)
 {
+	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
+	struct pmic_typec_port *pmic_typec_port = tcpm->pmic_typec_port;
 	struct device *dev = pmic_typec_port->dev;
 	unsigned int mode, currsrc;
 	unsigned int misc;
@@ -341,8 +523,17 @@ done:
 	return ret;
 }
 
-int qcom_pmic_typec_port_set_vconn(struct pmic_typec_port *pmic_typec_port, bool on)
+static int qcom_pmic_typec_port_set_polarity(struct tcpc_dev *tcpc,
+					     enum typec_cc_polarity pol)
+{
+	/* Polarity is set separately by phy-qcom-qmp.c */
+	return 0;
+}
+
+static int qcom_pmic_typec_port_set_vconn(struct tcpc_dev *tcpc, bool on)
 {
+	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
+	struct pmic_typec_port *pmic_typec_port = tcpm->pmic_typec_port;
 	struct device *dev = pmic_typec_port->dev;
 	unsigned int orientation, misc, mask, value;
 	unsigned long flags;
@@ -377,10 +568,12 @@ done:
 	return ret;
 }
 
-int qcom_pmic_typec_port_start_toggling(struct pmic_typec_port *pmic_typec_port,
-					enum typec_port_type port_type,
-					enum typec_cc_status cc)
+static int qcom_pmic_typec_port_start_toggling(struct tcpc_dev *tcpc,
+					       enum typec_port_type port_type,
+					       enum typec_cc_status cc)
 {
+	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
+	struct pmic_typec_port *pmic_typec_port = tcpm->pmic_typec_port;
 	struct device *dev = pmic_typec_port->dev;
 	unsigned int misc;
 	u8 mode = 0;
@@ -441,9 +634,10 @@ done:
 	(TYPEC_STATE_MACHINE_CHANGE_INT_EN | TYPEC_VBUS_ERROR_INT_EN | \
 	 TYPEC_DEBOUNCE_DONE_INT_EN)
 
-int qcom_pmic_typec_port_start(struct pmic_typec_port *pmic_typec_port,
-			       struct tcpm_port *tcpm_port)
+static int qcom_pmic_typec_port_start(struct pmic_typec *tcpm,
+				      struct tcpm_port *tcpm_port)
 {
+	struct pmic_typec_port *pmic_typec_port = tcpm->pmic_typec_port;
 	int i;
 	int mask;
 	int ret;
@@ -491,29 +685,30 @@ done:
 	return ret;
 }
 
-void qcom_pmic_typec_port_stop(struct pmic_typec_port *pmic_typec_port)
+static void qcom_pmic_typec_port_stop(struct pmic_typec *tcpm)
 {
+	struct pmic_typec_port *pmic_typec_port = tcpm->pmic_typec_port;
 	int i;
 
 	for (i = 0; i < pmic_typec_port->nr_irqs; i++)
 		disable_irq(pmic_typec_port->irq_data[i].irq);
 }
 
-struct pmic_typec_port *qcom_pmic_typec_port_alloc(struct device *dev)
-{
-	return devm_kzalloc(dev, sizeof(struct pmic_typec_port), GFP_KERNEL);
-}
-
 int qcom_pmic_typec_port_probe(struct platform_device *pdev,
-			       struct pmic_typec_port *pmic_typec_port,
-			       struct pmic_typec_port_resources *res,
+			       struct pmic_typec *tcpm,
+			       const struct pmic_typec_port_resources *res,
 			       struct regmap *regmap,
 			       u32 base)
 {
 	struct device *dev = &pdev->dev;
 	struct pmic_typec_port_irq_data *irq_data;
+	struct pmic_typec_port *pmic_typec_port;
 	int i, ret, irq;
 
+	pmic_typec_port = devm_kzalloc(dev, sizeof(*pmic_typec_port), GFP_KERNEL);
+	if (!pmic_typec_port)
+		return -ENOMEM;
+
 	if (!res->nr_irqs || res->nr_irqs > PMIC_TYPEC_MAX_IRQS)
 		return -EINVAL;
 
@@ -522,6 +717,8 @@ int qcom_pmic_typec_port_probe(struct platform_device *pdev,
 	if (!irq_data)
 		return -ENOMEM;
 
+	mutex_init(&pmic_typec_port->vbus_lock);
+
 	pmic_typec_port->vdd_vbus = devm_regulator_get(dev, "vdd-vbus");
 	if (IS_ERR(pmic_typec_port->vdd_vbus))
 		return PTR_ERR(pmic_typec_port->vdd_vbus);
@@ -556,5 +753,56 @@ int qcom_pmic_typec_port_probe(struct platform_device *pdev,
 			return ret;
 	}
 
+	tcpm->pmic_typec_port = pmic_typec_port;
+
+	tcpm->tcpc.get_vbus = qcom_pmic_typec_port_get_vbus;
+	tcpm->tcpc.set_vbus = qcom_pmic_typec_port_set_vbus;
+	tcpm->tcpc.set_cc = qcom_pmic_typec_port_set_cc;
+	tcpm->tcpc.get_cc = qcom_pmic_typec_port_get_cc;
+	tcpm->tcpc.set_polarity = qcom_pmic_typec_port_set_polarity;
+	tcpm->tcpc.set_vconn = qcom_pmic_typec_port_set_vconn;
+	tcpm->tcpc.start_toggling = qcom_pmic_typec_port_start_toggling;
+
+	tcpm->port_start = qcom_pmic_typec_port_start;
+	tcpm->port_stop = qcom_pmic_typec_port_stop;
+
 	return 0;
 }
+
+const struct pmic_typec_port_resources pm8150b_port_res = {
+	.irq_params = {
+		{
+			.irq_name = "vpd-detect",
+			.virq = PMIC_TYPEC_VPD_IRQ,
+		},
+
+		{
+			.irq_name = "cc-state-change",
+			.virq = PMIC_TYPEC_CC_STATE_IRQ,
+		},
+		{
+			.irq_name = "vconn-oc",
+			.virq = PMIC_TYPEC_VCONN_OC_IRQ,
+		},
+
+		{
+			.irq_name = "vbus-change",
+			.virq = PMIC_TYPEC_VBUS_IRQ,
+		},
+
+		{
+			.irq_name = "attach-detach",
+			.virq = PMIC_TYPEC_ATTACH_DETACH_IRQ,
+		},
+		{
+			.irq_name = "legacy-cable-detect",
+			.virq = PMIC_TYPEC_LEGACY_CABLE_IRQ,
+		},
+
+		{
+			.irq_name = "try-snk-src-detect",
+			.virq = PMIC_TYPEC_TRY_SNK_SRC_IRQ,
+		},
+	},
+	.nr_irqs = 7,
+};
diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.h b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.h
index d4d358c680..2ca83a46cf 100644
--- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.h
+++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.h
@@ -3,149 +3,12 @@
  * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
  * Copyright (c) 2023, Linaro Ltd. All rights reserved.
  */
-#ifndef __QCOM_PMIC_TYPEC_H__
-#define __QCOM_PMIC_TYPEC_H__
+#ifndef __QCOM_PMIC_TYPEC_PORT_H__
+#define __QCOM_PMIC_TYPEC_PORT_H__
 
 #include <linux/platform_device.h>
 #include <linux/usb/tcpm.h>
 
-#define TYPEC_SNK_STATUS_REG				0x06
-#define DETECTED_SNK_TYPE_MASK				GENMASK(6, 0)
-#define SNK_DAM_MASK					GENMASK(6, 4)
-#define SNK_DAM_500MA					BIT(6)
-#define SNK_DAM_1500MA					BIT(5)
-#define SNK_DAM_3000MA					BIT(4)
-#define SNK_RP_STD					BIT(3)
-#define SNK_RP_1P5					BIT(2)
-#define SNK_RP_3P0					BIT(1)
-#define SNK_RP_SHORT					BIT(0)
-
-#define TYPEC_SRC_STATUS_REG				0x08
-#define DETECTED_SRC_TYPE_MASK				GENMASK(4, 0)
-#define SRC_HIGH_BATT					BIT(5)
-#define SRC_DEBUG_ACCESS				BIT(4)
-#define SRC_RD_OPEN					BIT(3)
-#define SRC_RD_RA_VCONN					BIT(2)
-#define SRC_RA_OPEN					BIT(1)
-#define AUDIO_ACCESS_RA_RA				BIT(0)
-
-#define TYPEC_STATE_MACHINE_STATUS_REG			0x09
-#define TYPEC_ATTACH_DETACH_STATE			BIT(5)
-
-#define TYPEC_SM_STATUS_REG				0x0A
-#define TYPEC_SM_VBUS_VSAFE5V				BIT(5)
-#define TYPEC_SM_VBUS_VSAFE0V				BIT(6)
-#define TYPEC_SM_USBIN_LT_LV				BIT(7)
-
-#define TYPEC_MISC_STATUS_REG				0x0B
-#define TYPEC_WATER_DETECTION_STATUS			BIT(7)
-#define SNK_SRC_MODE					BIT(6)
-#define TYPEC_VBUS_DETECT				BIT(5)
-#define TYPEC_VBUS_ERROR_STATUS				BIT(4)
-#define TYPEC_DEBOUNCE_DONE				BIT(3)
-#define CC_ORIENTATION					BIT(1)
-#define CC_ATTACHED					BIT(0)
-
-#define LEGACY_CABLE_STATUS_REG				0x0D
-#define TYPEC_LEGACY_CABLE_STATUS			BIT(1)
-#define TYPEC_NONCOMP_LEGACY_CABLE_STATUS		BIT(0)
-
-#define TYPEC_U_USB_STATUS_REG				0x0F
-#define U_USB_GROUND_NOVBUS				BIT(6)
-#define U_USB_GROUND					BIT(4)
-#define U_USB_FMB1					BIT(3)
-#define U_USB_FLOAT1					BIT(2)
-#define U_USB_FMB2					BIT(1)
-#define U_USB_FLOAT2					BIT(0)
-
-#define TYPEC_MODE_CFG_REG				0x44
-#define TYPEC_TRY_MODE_MASK				GENMASK(4, 3)
-#define EN_TRY_SNK					BIT(4)
-#define EN_TRY_SRC					BIT(3)
-#define TYPEC_POWER_ROLE_CMD_MASK			GENMASK(2, 0)
-#define EN_SRC_ONLY					BIT(2)
-#define EN_SNK_ONLY					BIT(1)
-#define TYPEC_DISABLE_CMD				BIT(0)
-
-#define TYPEC_VCONN_CONTROL_REG				0x46
-#define VCONN_EN_ORIENTATION				BIT(2)
-#define VCONN_EN_VALUE					BIT(1)
-#define VCONN_EN_SRC					BIT(0)
-
-#define TYPEC_CCOUT_CONTROL_REG				0x48
-#define TYPEC_CCOUT_BUFFER_EN				BIT(2)
-#define TYPEC_CCOUT_VALUE				BIT(1)
-#define TYPEC_CCOUT_SRC					BIT(0)
-
-#define DEBUG_ACCESS_SRC_CFG_REG			0x4C
-#define EN_UNORIENTED_DEBUG_ACCESS_SRC			BIT(0)
-
-#define TYPE_C_CRUDE_SENSOR_CFG_REG			0x4e
-#define EN_SRC_CRUDE_SENSOR				BIT(1)
-#define EN_SNK_CRUDE_SENSOR				BIT(0)
-
-#define TYPEC_EXIT_STATE_CFG_REG			0x50
-#define BYPASS_VSAFE0V_DURING_ROLE_SWAP			BIT(3)
-#define SEL_SRC_UPPER_REF				BIT(2)
-#define USE_TPD_FOR_EXITING_ATTACHSRC			BIT(1)
-#define EXIT_SNK_BASED_ON_CC				BIT(0)
-
-#define TYPEC_CURRSRC_CFG_REG				0x52
-#define TYPEC_SRC_RP_SEL_330UA				BIT(1)
-#define TYPEC_SRC_RP_SEL_180UA				BIT(0)
-#define TYPEC_SRC_RP_SEL_80UA				0
-#define TYPEC_SRC_RP_SEL_MASK				GENMASK(1, 0)
-
-#define TYPEC_INTERRUPT_EN_CFG_1_REG			0x5E
-#define TYPEC_LEGACY_CABLE_INT_EN			BIT(7)
-#define TYPEC_NONCOMPLIANT_LEGACY_CABLE_INT_EN		BIT(6)
-#define TYPEC_TRYSOURCE_DETECT_INT_EN			BIT(5)
-#define TYPEC_TRYSINK_DETECT_INT_EN			BIT(4)
-#define TYPEC_CCOUT_DETACH_INT_EN			BIT(3)
-#define TYPEC_CCOUT_ATTACH_INT_EN			BIT(2)
-#define TYPEC_VBUS_DEASSERT_INT_EN			BIT(1)
-#define TYPEC_VBUS_ASSERT_INT_EN			BIT(0)
-
-#define TYPEC_INTERRUPT_EN_CFG_2_REG			0x60
-#define TYPEC_SRC_BATT_HPWR_INT_EN			BIT(6)
-#define MICRO_USB_STATE_CHANGE_INT_EN			BIT(5)
-#define TYPEC_STATE_MACHINE_CHANGE_INT_EN		BIT(4)
-#define TYPEC_DEBUG_ACCESS_DETECT_INT_EN		BIT(3)
-#define TYPEC_WATER_DETECTION_INT_EN			BIT(2)
-#define TYPEC_VBUS_ERROR_INT_EN				BIT(1)
-#define TYPEC_DEBOUNCE_DONE_INT_EN			BIT(0)
-
-#define TYPEC_DEBOUNCE_OPTION_REG			0x62
-#define REDUCE_TCCDEBOUNCE_TO_2MS			BIT(2)
-
-#define TYPE_C_SBU_CFG_REG				0x6A
-#define SEL_SBU1_ISRC_VAL				0x04
-#define SEL_SBU2_ISRC_VAL				0x01
-
-#define TYPEC_U_USB_CFG_REG				0x70
-#define EN_MICRO_USB_FACTORY_MODE			BIT(1)
-#define EN_MICRO_USB_MODE				BIT(0)
-
-#define TYPEC_PMI632_U_USB_WATER_PROTECTION_CFG_REG	0x72
-
-#define TYPEC_U_USB_WATER_PROTECTION_CFG_REG		0x73
-#define EN_MICRO_USB_WATER_PROTECTION			BIT(4)
-#define MICRO_USB_DETECTION_ON_TIME_CFG_MASK		GENMASK(3, 2)
-#define MICRO_USB_DETECTION_PERIOD_CFG_MASK		GENMASK(1, 0)
-
-#define TYPEC_PMI632_MICRO_USB_MODE_REG			0x73
-#define MICRO_USB_MODE_ONLY				BIT(0)
-
-/* Interrupt numbers */
-#define PMIC_TYPEC_OR_RID_IRQ				0x0
-#define PMIC_TYPEC_VPD_IRQ				0x1
-#define PMIC_TYPEC_CC_STATE_IRQ				0x2
-#define PMIC_TYPEC_VCONN_OC_IRQ				0x3
-#define PMIC_TYPEC_VBUS_IRQ				0x4
-#define PMIC_TYPEC_ATTACH_DETACH_IRQ			0x5
-#define PMIC_TYPEC_LEGACY_CABLE_IRQ			0x6
-#define PMIC_TYPEC_TRY_SNK_SRC_IRQ			0x7
-
 /* Resources */
 #define PMIC_TYPEC_MAX_IRQS				0x08
 
@@ -156,40 +19,17 @@ struct pmic_typec_port_irq_params {
 
 struct pmic_typec_port_resources {
 	unsigned int				nr_irqs;
-	struct pmic_typec_port_irq_params	irq_params[PMIC_TYPEC_MAX_IRQS];
+	const struct pmic_typec_port_irq_params	irq_params[PMIC_TYPEC_MAX_IRQS];
 };
 
 /* API */
-struct pmic_typec;
 
-struct pmic_typec_port *qcom_pmic_typec_port_alloc(struct device *dev);
+extern const struct pmic_typec_port_resources pm8150b_port_res;
 
 int qcom_pmic_typec_port_probe(struct platform_device *pdev,
-			       struct pmic_typec_port *pmic_typec_port,
-			       struct pmic_typec_port_resources *res,
+			       struct pmic_typec *tcpm,
+			       const struct pmic_typec_port_resources *res,
 			       struct regmap *regmap,
 			       u32 base);
 
-int qcom_pmic_typec_port_start(struct pmic_typec_port *pmic_typec_port,
-			       struct tcpm_port *tcpm_port);
-
-void qcom_pmic_typec_port_stop(struct pmic_typec_port *pmic_typec_port);
-
-int qcom_pmic_typec_port_get_cc(struct pmic_typec_port *pmic_typec_port,
-				enum typec_cc_status *cc1,
-				enum typec_cc_status *cc2);
-
-int qcom_pmic_typec_port_set_cc(struct pmic_typec_port *pmic_typec_port,
-				enum typec_cc_status cc);
-
-int qcom_pmic_typec_port_get_vbus(struct pmic_typec_port *pmic_typec_port);
-
-int qcom_pmic_typec_port_set_vconn(struct pmic_typec_port *pmic_typec_port, bool on);
-
-int qcom_pmic_typec_port_start_toggling(struct pmic_typec_port *pmic_typec_port,
-					enum typec_port_type port_type,
-					enum typec_cc_status cc);
-
-int qcom_pmic_typec_port_set_vbus(struct pmic_typec_port *pmic_typec_port, bool on);
-
 #endif /* __QCOM_PMIC_TYPE_C_PORT_H__ */
diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
index 7118551827..c962014bba 100644
--- a/drivers/usb/typec/tcpm/tcpci.c
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -445,8 +445,11 @@ static int tcpci_set_pd_rx(struct tcpc_dev *tcpc, bool enable)
 	unsigned int reg = 0;
 	int ret;
 
-	if (enable)
+	if (enable) {
 		reg = TCPC_RX_DETECT_SOP | TCPC_RX_DETECT_HARD_RESET;
+		if (tcpci->data->cable_comm_capable)
+			reg |= TCPC_RX_DETECT_SOP1;
+	}
 	ret = regmap_write(tcpci->regmap, TCPC_RX_DETECT, reg);
 	if (ret < 0)
 		return ret;
@@ -584,6 +587,23 @@ static int tcpci_pd_transmit(struct tcpc_dev *tcpc, enum tcpm_transmit_type type
 	return 0;
 }
 
+static bool tcpci_cable_comm_capable(struct tcpc_dev *tcpc)
+{
+	struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
+
+	return tcpci->data->cable_comm_capable;
+}
+
+static bool tcpci_attempt_vconn_swap_discovery(struct tcpc_dev *tcpc)
+{
+	struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
+
+	if (tcpci->data->attempt_vconn_swap_discovery)
+		return tcpci->data->attempt_vconn_swap_discovery(tcpci, tcpci->data);
+
+	return false;
+}
+
 static int tcpci_init(struct tcpc_dev *tcpc)
 {
 	struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
@@ -712,7 +732,7 @@ irqreturn_t tcpci_irq(struct tcpci *tcpci)
 		/* Read complete, clear RX status alert bit */
 		tcpci_write16(tcpci, TCPC_ALERT, TCPC_ALERT_RX_STATUS);
 
-		tcpm_pd_receive(tcpci->port, &msg);
+		tcpm_pd_receive(tcpci->port, &msg, TCPC_TX_SOP);
 	}
 
 	if (tcpci->data->vbus_vsafe0v && (status & TCPC_ALERT_EXTENDED_STATUS)) {
@@ -793,6 +813,8 @@ struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data)
 	tcpci->tcpc.enable_frs = tcpci_enable_frs;
 	tcpci->tcpc.frs_sourcing_vbus = tcpci_frs_sourcing_vbus;
 	tcpci->tcpc.set_partner_usb_comm_capable = tcpci_set_partner_usb_comm_capable;
+	tcpci->tcpc.cable_comm_capable = tcpci_cable_comm_capable;
+	tcpci->tcpc.attempt_vconn_swap_discovery = tcpci_attempt_vconn_swap_discovery;
 
 	if (tcpci->data->check_contaminant)
 		tcpci->tcpc.check_contaminant = tcpci_check_contaminant;
diff --git a/drivers/usb/typec/tcpm/tcpci_maxim.h b/drivers/usb/typec/tcpm/tcpci_maxim.h
index 2c1c4d161b..78ff3b73ee 100644
--- a/drivers/usb/typec/tcpm/tcpci_maxim.h
+++ b/drivers/usb/typec/tcpm/tcpci_maxim.h
@@ -62,6 +62,7 @@ struct max_tcpci_chip {
 	struct i2c_client *client;
 	struct tcpm_port *port;
 	enum contamiant_state contaminant_state;
+	bool veto_vconn_swap;
 };
 
 static inline int max_tcpci_read16(struct max_tcpci_chip *chip, unsigned int reg, u16 *val)
diff --git a/drivers/usb/typec/tcpm/tcpci_maxim_core.c b/drivers/usb/typec/tcpm/tcpci_maxim_core.c
index 7fb966fd63..eec3bcec11 100644
--- a/drivers/usb/typec/tcpm/tcpci_maxim_core.c
+++ b/drivers/usb/typec/tcpm/tcpci_maxim_core.c
@@ -128,6 +128,7 @@ static void process_rx(struct max_tcpci_chip *chip, u16 status)
 	u8 count, frame_type, rx_buf[TCPC_RECEIVE_BUFFER_LEN];
 	int ret, payload_index;
 	u8 *rx_buf_ptr;
+	enum tcpm_transmit_type rx_type;
 
 	/*
 	 * READABLE_BYTE_COUNT: Indicates the number of bytes in the RX_BUF_BYTE_x registers
@@ -143,10 +144,23 @@ static void process_rx(struct max_tcpci_chip *chip, u16 status)
 	count = rx_buf[TCPC_RECEIVE_BUFFER_COUNT_OFFSET];
 	frame_type = rx_buf[TCPC_RECEIVE_BUFFER_FRAME_TYPE_OFFSET];
 
-	if (count == 0 || frame_type != TCPC_RX_BUF_FRAME_TYPE_SOP) {
+	switch (frame_type) {
+	case TCPC_RX_BUF_FRAME_TYPE_SOP1:
+		rx_type = TCPC_TX_SOP_PRIME;
+		break;
+	case TCPC_RX_BUF_FRAME_TYPE_SOP:
+		rx_type = TCPC_TX_SOP;
+		break;
+	default:
+		rx_type = TCPC_TX_SOP;
+		break;
+	}
+
+	if (count == 0 || (frame_type != TCPC_RX_BUF_FRAME_TYPE_SOP &&
+	    frame_type != TCPC_RX_BUF_FRAME_TYPE_SOP1)) {
 		max_tcpci_write16(chip, TCPC_ALERT, TCPC_ALERT_RX_STATUS);
 		dev_err(chip->dev, "%s\n", count ==  0 ? "error: count is 0" :
-			"error frame_type is not SOP");
+			"error frame_type is not SOP/SOP'");
 		return;
 	}
 
@@ -183,7 +197,7 @@ static void process_rx(struct max_tcpci_chip *chip, u16 status)
 	if (ret < 0)
 		return;
 
-	tcpm_pd_receive(chip->port, &msg);
+	tcpm_pd_receive(chip->port, &msg, rx_type);
 }
 
 static int max_tcpci_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata, bool source, bool sink)
@@ -309,8 +323,10 @@ static irqreturn_t _max_tcpci_irq(struct max_tcpci_chip *chip, u16 status)
 		if (ret < 0)
 			return ret;
 
-		if (reg_status & TCPC_FAULT_STATUS_VCONN_OC)
+		if (reg_status & TCPC_FAULT_STATUS_VCONN_OC) {
+			chip->veto_vconn_swap = true;
 			tcpm_port_error_recovery(chip->port);
+		}
 	}
 
 	if (status & TCPC_ALERT_EXTND) {
@@ -444,6 +460,18 @@ static void max_tcpci_check_contaminant(struct tcpci *tcpci, struct tcpci_data *
 		tcpm_port_clean(chip->port);
 }
 
+static bool max_tcpci_attempt_vconn_swap_discovery(struct tcpci *tcpci, struct tcpci_data *tdata)
+{
+	struct max_tcpci_chip *chip = tdata_to_max_tcpci(tdata);
+
+	if (chip->veto_vconn_swap) {
+		chip->veto_vconn_swap = false;
+		return false;
+	}
+
+	return true;
+}
+
 static int max_tcpci_probe(struct i2c_client *client)
 {
 	int ret;
@@ -478,6 +506,8 @@ static int max_tcpci_probe(struct i2c_client *client)
 	chip->data.vbus_vsafe0v = true;
 	chip->data.set_partner_usb_comm_capable = max_tcpci_set_partner_usb_comm_capable;
 	chip->data.check_contaminant = max_tcpci_check_contaminant;
+	chip->data.cable_comm_capable = true;
+	chip->data.attempt_vconn_swap_discovery = max_tcpci_attempt_vconn_swap_discovery;
 
 	max_tcpci_init_regs(chip);
 	chip->tcpci = tcpci_register_port(chip->dev, &chip->data);
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index 3f7200a227..5d4da962ac 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -108,6 +108,7 @@
 	S(VCONN_SWAP_WAIT_FOR_VCONN),		\
 	S(VCONN_SWAP_TURN_ON_VCONN),		\
 	S(VCONN_SWAP_TURN_OFF_VCONN),		\
+	S(VCONN_SWAP_SEND_SOFT_RESET),		\
 						\
 	S(FR_SWAP_SEND),			\
 	S(FR_SWAP_SEND_TIMEOUT),		\
@@ -145,7 +146,9 @@
 	S(PORT_RESET_WAIT_OFF),			\
 						\
 	S(AMS_START),				\
-	S(CHUNK_NOT_SUPP)
+	S(CHUNK_NOT_SUPP),			\
+						\
+	S(SRC_VDM_IDENTITY_REQUEST)
 
 #define FOREACH_AMS(S)				\
 	S(NONE_AMS),				\
@@ -327,6 +330,12 @@ struct tcpm_port {
 	struct typec_partner_desc partner_desc;
 	struct typec_partner *partner;
 
+	struct usb_pd_identity cable_ident;
+	struct typec_cable_desc cable_desc;
+	struct typec_cable *cable;
+	struct typec_plug_desc plug_prime_desc;
+	struct typec_plug *plug_prime;
+
 	enum typec_cc_status cc_req;
 	enum typec_cc_status src_rp;	/* work only if pd_supported == false */
 
@@ -468,7 +477,9 @@ struct tcpm_port {
 
 	/* Alternate mode data */
 	struct pd_mode_data mode_data;
+	struct pd_mode_data mode_data_prime;
 	struct typec_altmode *partner_altmode[ALTMODE_DISCOVERY_MAX];
+	struct typec_altmode *plug_prime_altmode[ALTMODE_DISCOVERY_MAX];
 	struct typec_altmode *port_altmode[ALTMODE_DISCOVERY_MAX];
 
 	/* Deadline in jiffies to exit src_try_wait state */
@@ -505,6 +516,41 @@ struct tcpm_port {
 	 * transitions.
 	 */
 	bool potential_contaminant;
+
+	/* SOP* Related Fields */
+	/*
+	 * Flag to determine if SOP' Discover Identity is available. The flag
+	 * is set if Discover Identity on SOP' does not immediately follow
+	 * Discover Identity on SOP.
+	 */
+	bool send_discover_prime;
+	/*
+	 * tx_sop_type determines which SOP* a message is being sent on.
+	 * For messages that are queued and not sent immediately such as in
+	 * tcpm_queue_message or messages that send after state changes,
+	 * the tx_sop_type is set accordingly.
+	 */
+	enum tcpm_transmit_type tx_sop_type;
+	/*
+	 * Prior to discovering the port partner's Specification Revision, the
+	 * Vconn source and cable plug will use the lower of their two revisions.
+	 *
+	 * When the port partner's Specification Revision is discovered, the following
+	 * rules are put in place.
+	 *	1. If the cable revision (1) is lower than the revision negotiated
+	 * between the port and partner (2), the port and partner will communicate
+	 * on revision (2), but the port and cable will communicate on revision (1).
+	 *	2. If the cable revision (1) is higher than the revision negotiated
+	 * between the port and partner (2), the port and partner will communicate
+	 * on revision (2), and the port and cable will communicate on revision (2)
+	 * as well.
+	 */
+	unsigned int negotiated_rev_prime;
+	/*
+	 * Each SOP* type must maintain their own tx and rx message IDs
+	 */
+	unsigned int message_id_prime;
+	unsigned int rx_msgid_prime;
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *dentry;
 	struct mutex logbuffer_lock;	/* log buffer access lock */
@@ -518,6 +564,7 @@ struct pd_rx_event {
 	struct kthread_work work;
 	struct tcpm_port *port;
 	struct pd_message msg;
+	enum tcpm_transmit_type rx_sop_type;
 };
 
 static const char * const pd_rev[] = {
@@ -893,19 +940,30 @@ static void tcpm_ams_finish(struct tcpm_port *port)
 }
 
 static int tcpm_pd_transmit(struct tcpm_port *port,
-			    enum tcpm_transmit_type type,
+			    enum tcpm_transmit_type tx_sop_type,
 			    const struct pd_message *msg)
 {
 	unsigned long timeout;
 	int ret;
+	unsigned int negotiated_rev;
+
+	switch (tx_sop_type) {
+	case TCPC_TX_SOP_PRIME:
+		negotiated_rev = port->negotiated_rev_prime;
+		break;
+	case TCPC_TX_SOP:
+	default:
+		negotiated_rev = port->negotiated_rev;
+		break;
+	}
 
 	if (msg)
 		tcpm_log(port, "PD TX, header: %#x", le16_to_cpu(msg->header));
 	else
-		tcpm_log(port, "PD TX, type: %#x", type);
+		tcpm_log(port, "PD TX, type: %#x", tx_sop_type);
 
 	reinit_completion(&port->tx_complete);
-	ret = port->tcpc->pd_transmit(port->tcpc, type, msg, port->negotiated_rev);
+	ret = port->tcpc->pd_transmit(port->tcpc, tx_sop_type, msg, negotiated_rev);
 	if (ret < 0)
 		return ret;
 
@@ -918,7 +976,17 @@ static int tcpm_pd_transmit(struct tcpm_port *port,
 
 	switch (port->tx_status) {
 	case TCPC_TX_SUCCESS:
-		port->message_id = (port->message_id + 1) & PD_HEADER_ID_MASK;
+		switch (tx_sop_type) {
+		case TCPC_TX_SOP_PRIME:
+			port->message_id_prime = (port->message_id_prime + 1) &
+						 PD_HEADER_ID_MASK;
+			break;
+		case TCPC_TX_SOP:
+		default:
+			port->message_id = (port->message_id + 1) &
+					   PD_HEADER_ID_MASK;
+			break;
+		}
 		/*
 		 * USB PD rev 2.0, 8.3.2.2.1:
 		 * USB PD rev 3.0, 8.3.2.1.3:
@@ -1099,6 +1167,12 @@ static int tcpm_set_roles(struct tcpm_port *port, bool attached,
 	if (ret < 0)
 		return ret;
 
+	if (port->tcpc->set_orientation) {
+		ret = port->tcpc->set_orientation(port->tcpc, orientation);
+		if (ret < 0)
+			return ret;
+	}
+
 	port->pwr_role = role;
 	port->data_role = data;
 	typec_set_data_role(port->typec_port, data);
@@ -1456,7 +1530,7 @@ static int tcpm_ams_start(struct tcpm_port *port, enum tcpm_ams ams)
  * VDM/VDO handling functions
  */
 static void tcpm_queue_vdm(struct tcpm_port *port, const u32 header,
-			   const u32 *data, int cnt)
+			   const u32 *data, int cnt, enum tcpm_transmit_type tx_sop_type)
 {
 	u32 vdo_hdr = port->vdo_data[0];
 
@@ -1464,7 +1538,10 @@ static void tcpm_queue_vdm(struct tcpm_port *port, const u32 header,
 
 	/* If is sending discover_identity, handle received message first */
 	if (PD_VDO_SVDM(vdo_hdr) && PD_VDO_CMD(vdo_hdr) == CMD_DISCOVER_IDENT) {
-		port->send_discover = true;
+		if (tx_sop_type == TCPC_TX_SOP_PRIME)
+			port->send_discover_prime = true;
+		else
+			port->send_discover = true;
 		mod_send_discover_delayed_work(port, SEND_DISCOVER_RETRY_MS);
 	} else {
 		/* Make sure we are not still processing a previous VDM packet */
@@ -1479,14 +1556,20 @@ static void tcpm_queue_vdm(struct tcpm_port *port, const u32 header,
 	port->vdm_state = VDM_STATE_READY;
 	port->vdm_sm_running = true;
 
+	port->tx_sop_type = tx_sop_type;
+
 	mod_vdm_delayed_work(port, 0);
 }
 
 static void tcpm_queue_vdm_unlocked(struct tcpm_port *port, const u32 header,
-				    const u32 *data, int cnt)
+				    const u32 *data, int cnt, enum tcpm_transmit_type tx_sop_type)
 {
+	if (port->state != SRC_READY && port->state != SNK_READY &&
+	    port->state != SRC_VDM_IDENTITY_REQUEST)
+		return;
+
 	mutex_lock(&port->lock);
-	tcpm_queue_vdm(port, header, data, cnt);
+	tcpm_queue_vdm(port, header, data, cnt, tx_sop_type);
 	mutex_unlock(&port->lock);
 }
 
@@ -1509,9 +1592,68 @@ static void svdm_consume_identity(struct tcpm_port *port, const u32 *p, int cnt)
 		 PD_PRODUCT_PID(product), product & 0xffff);
 }
 
-static bool svdm_consume_svids(struct tcpm_port *port, const u32 *p, int cnt)
+static void svdm_consume_identity_sop_prime(struct tcpm_port *port, const u32 *p, int cnt)
 {
-	struct pd_mode_data *pmdata = &port->mode_data;
+	u32 idh = p[VDO_INDEX_IDH];
+	u32 product = p[VDO_INDEX_PRODUCT];
+	int svdm_version;
+
+	/*
+	 * Attempt to consume identity only if cable currently is not set
+	 */
+	if (!IS_ERR_OR_NULL(port->cable))
+		goto register_plug;
+
+	/* Reset cable identity */
+	memset(&port->cable_ident, 0, sizeof(port->cable_ident));
+
+	/* Fill out id header, cert, product, cable VDO 1 */
+	port->cable_ident.id_header = idh;
+	port->cable_ident.cert_stat = p[VDO_INDEX_CSTAT];
+	port->cable_ident.product = product;
+	port->cable_ident.vdo[0] = p[VDO_INDEX_CABLE_1];
+
+	/* Fill out cable desc, infer svdm_version from pd revision */
+	port->cable_desc.type = (enum typec_plug_type) (VDO_TYPEC_CABLE_TYPE(p[VDO_INDEX_CABLE_1]) +
+							USB_PLUG_TYPE_A);
+	port->cable_desc.active = PD_IDH_PTYPE(idh) == IDH_PTYPE_ACABLE ? 1 : 0;
+	/* Log PD Revision and additional cable VDO from negotiated revision */
+	switch (port->negotiated_rev_prime) {
+	case PD_REV30:
+		port->cable_desc.pd_revision = 0x0300;
+		if (port->cable_desc.active)
+			port->cable_ident.vdo[1] = p[VDO_INDEX_CABLE_2];
+		break;
+	case PD_REV20:
+		port->cable_desc.pd_revision = 0x0200;
+		break;
+	default:
+		port->cable_desc.pd_revision = 0x0200;
+		break;
+	}
+	port->cable_desc.identity = &port->cable_ident;
+	/* Register Cable, set identity and svdm_version */
+	port->cable = typec_register_cable(port->typec_port, &port->cable_desc);
+	if (IS_ERR_OR_NULL(port->cable))
+		return;
+	typec_cable_set_identity(port->cable);
+	/* Get SVDM version */
+	svdm_version = PD_VDO_SVDM_VER(p[VDO_INDEX_HDR]);
+	typec_cable_set_svdm_version(port->cable, svdm_version);
+
+register_plug:
+	if (IS_ERR_OR_NULL(port->plug_prime)) {
+		port->plug_prime_desc.index = TYPEC_PLUG_SOP_P;
+		port->plug_prime = typec_register_plug(port->cable,
+						       &port->plug_prime_desc);
+	}
+}
+
+static bool svdm_consume_svids(struct tcpm_port *port, const u32 *p, int cnt,
+			       enum tcpm_transmit_type rx_sop_type)
+{
+	struct pd_mode_data *pmdata = rx_sop_type == TCPC_TX_SOP_PRIME ?
+				      &port->mode_data_prime : &port->mode_data;
 	int i;
 
 	for (i = 1; i < cnt; i++) {
@@ -1557,14 +1699,29 @@ abort:
 	return false;
 }
 
-static void svdm_consume_modes(struct tcpm_port *port, const u32 *p, int cnt)
+static void svdm_consume_modes(struct tcpm_port *port, const u32 *p, int cnt,
+			       enum tcpm_transmit_type rx_sop_type)
 {
 	struct pd_mode_data *pmdata = &port->mode_data;
 	struct typec_altmode_desc *paltmode;
 	int i;
 
-	if (pmdata->altmodes >= ARRAY_SIZE(port->partner_altmode)) {
-		/* Already logged in svdm_consume_svids() */
+	switch (rx_sop_type) {
+	case TCPC_TX_SOP_PRIME:
+		pmdata = &port->mode_data_prime;
+		if (pmdata->altmodes >= ARRAY_SIZE(port->plug_prime_altmode)) {
+			/* Already logged in svdm_consume_svids() */
+			return;
+		}
+		break;
+	case TCPC_TX_SOP:
+		pmdata = &port->mode_data;
+		if (pmdata->altmodes >= ARRAY_SIZE(port->partner_altmode)) {
+			/* Already logged in svdm_consume_svids() */
+			return;
+		}
+		break;
+	default:
 		return;
 	}
 
@@ -1605,20 +1762,129 @@ static void tcpm_register_partner_altmodes(struct tcpm_port *port)
 	}
 }
 
+static void tcpm_register_plug_altmodes(struct tcpm_port *port)
+{
+	struct pd_mode_data *modep = &port->mode_data_prime;
+	struct typec_altmode *altmode;
+	int i;
+
+	typec_plug_set_num_altmodes(port->plug_prime, modep->altmodes);
+
+	for (i = 0; i < modep->altmodes; i++) {
+		altmode = typec_plug_register_altmode(port->plug_prime,
+						&modep->altmode_desc[i]);
+		if (IS_ERR(altmode)) {
+			tcpm_log(port, "Failed to register plug SVID 0x%04x",
+				 modep->altmode_desc[i].svid);
+			altmode = NULL;
+		}
+		port->plug_prime_altmode[i] = altmode;
+	}
+}
+
 #define supports_modal(port)	PD_IDH_MODAL_SUPP((port)->partner_ident.id_header)
+#define supports_modal_cable(port)     PD_IDH_MODAL_SUPP((port)->cable_ident.id_header)
+#define supports_host(port)    PD_IDH_HOST_SUPP((port->partner_ident.id_header))
+
+/*
+ * Helper to determine whether the port is capable of SOP' communication at the
+ * current point in time.
+ */
+static bool tcpm_can_communicate_sop_prime(struct tcpm_port *port)
+{
+	/* Check to see if tcpc supports SOP' communication */
+	if (!port->tcpc->cable_comm_capable || !port->tcpc->cable_comm_capable(port->tcpc))
+		return false;
+	/*
+	 * Power Delivery 2.0 Section 6.3.11
+	 * Before communicating with a Cable Plug a Port Should ensure that it
+	 * is the Vconn Source and that the Cable Plugs are powered by
+	 * performing a Vconn swap if necessary. Since it cannot be guaranteed
+	 * that the present Vconn Source is supplying Vconn, the only means to
+	 * ensure that the Cable Plugs are powered is for a Port wishing to
+	 * communicate with a Cable Plug is to become the Vconn Source.
+	 *
+	 * Power Delivery 3.0 Section 6.3.11
+	 * Before communicating with a Cable Plug a Port Shall ensure that it
+	 * is the Vconn source.
+	 */
+	if (port->vconn_role != TYPEC_SOURCE)
+		return false;
+	/*
+	 * Power Delivery 2.0 Section 2.4.4
+	 * When no Contract or an Implicit Contract is in place the Source can
+	 * communicate with a Cable Plug using SOP' packets in order to discover
+	 * its characteristics.
+	 *
+	 * Power Delivery 3.0 Section 2.4.4
+	 * When no Contract or an Implicit Contract is in place only the Source
+	 * port that is supplying Vconn is allowed to send packets to a Cable
+	 * Plug and is allowed to respond to packets from the Cable Plug.
+	 */
+	if (!port->explicit_contract)
+		return port->pwr_role == TYPEC_SOURCE;
+	if (port->negotiated_rev == PD_REV30)
+		return true;
+	/*
+	 * Power Delivery 2.0 Section 2.4.4
+	 *
+	 * When an Explicit Contract is in place the DFP (either the Source or
+	 * the Sink) can communicate with the Cable Plug(s) using SOP’/SOP”
+	 * Packets (see Figure 2-3).
+	 */
+	if (port->negotiated_rev == PD_REV20)
+		return port->data_role == TYPEC_HOST;
+	return false;
+}
+
+static bool tcpm_attempt_vconn_swap_discovery(struct tcpm_port *port)
+{
+	if (!port->tcpc->attempt_vconn_swap_discovery)
+		return false;
+
+	/* Port is already source, no need to perform swap */
+	if (port->vconn_role == TYPEC_SOURCE)
+		return false;
+
+	/*
+	 * Partner needs to support Alternate Modes with modal support. If
+	 * partner is also capable of being a USB Host, it could be a device
+	 * that supports Alternate Modes as the DFP.
+	 */
+	if (!supports_modal(port) || supports_host(port))
+		return false;
+
+	if ((port->negotiated_rev == PD_REV20 && port->data_role == TYPEC_HOST) ||
+	    port->negotiated_rev == PD_REV30)
+		return port->tcpc->attempt_vconn_swap_discovery(port->tcpc);
+
+	return false;
+}
+
+
+static bool tcpm_cable_vdm_supported(struct tcpm_port *port)
+{
+	return !IS_ERR_OR_NULL(port->cable) &&
+	       typec_cable_is_active(port->cable) &&
+	       supports_modal_cable(port) &&
+	       tcpm_can_communicate_sop_prime(port);
+}
 
 static int tcpm_pd_svdm(struct tcpm_port *port, struct typec_altmode *adev,
 			const u32 *p, int cnt, u32 *response,
-			enum adev_actions *adev_action)
+			enum adev_actions *adev_action,
+			enum tcpm_transmit_type rx_sop_type,
+			enum tcpm_transmit_type *response_tx_sop_type)
 {
 	struct typec_port *typec = port->typec_port;
-	struct typec_altmode *pdev;
-	struct pd_mode_data *modep;
+	struct typec_altmode *pdev, *pdev_prime;
+	struct pd_mode_data *modep, *modep_prime;
 	int svdm_version;
 	int rlen = 0;
 	int cmd_type;
 	int cmd;
 	int i;
+	int ret;
 
 	cmd_type = PD_VDO_CMDT(p[0]);
 	cmd = PD_VDO_CMD(p[0]);
@@ -1626,17 +1892,54 @@ static int tcpm_pd_svdm(struct tcpm_port *port, struct typec_altmode *adev,
 	tcpm_log(port, "Rx VDM cmd 0x%x type %d cmd %d len %d",
 		 p[0], cmd_type, cmd, cnt);
 
-	modep = &port->mode_data;
-
-	pdev = typec_match_altmode(port->partner_altmode, ALTMODE_DISCOVERY_MAX,
-				   PD_VDO_VID(p[0]), PD_VDO_OPOS(p[0]));
-
-	svdm_version = typec_get_negotiated_svdm_version(typec);
-	if (svdm_version < 0)
-		return 0;
+	switch (rx_sop_type) {
+	case TCPC_TX_SOP_PRIME:
+		modep_prime = &port->mode_data_prime;
+		pdev_prime = typec_match_altmode(port->plug_prime_altmode,
+						 ALTMODE_DISCOVERY_MAX,
+						 PD_VDO_VID(p[0]),
+						 PD_VDO_OPOS(p[0]));
+		svdm_version = typec_get_cable_svdm_version(typec);
+		/*
+		 * Update SVDM version if cable was discovered before port partner.
+		 */
+		if (!IS_ERR_OR_NULL(port->cable) &&
+		    PD_VDO_SVDM_VER(p[0]) < svdm_version)
+			typec_cable_set_svdm_version(port->cable, svdm_version);
+		break;
+	case TCPC_TX_SOP:
+		modep = &port->mode_data;
+		pdev = typec_match_altmode(port->partner_altmode,
+					   ALTMODE_DISCOVERY_MAX,
+					   PD_VDO_VID(p[0]),
+					   PD_VDO_OPOS(p[0]));
+		svdm_version = typec_get_negotiated_svdm_version(typec);
+		if (svdm_version < 0)
+			return 0;
+		break;
+	default:
+		modep = &port->mode_data;
+		pdev = typec_match_altmode(port->partner_altmode,
+					   ALTMODE_DISCOVERY_MAX,
+					   PD_VDO_VID(p[0]),
+					   PD_VDO_OPOS(p[0]));
+		svdm_version = typec_get_negotiated_svdm_version(typec);
+		if (svdm_version < 0)
+			return 0;
+		break;
+	}
 
 	switch (cmd_type) {
 	case CMDT_INIT:
+		/*
+		 * Only the port or port partner is allowed to initialize SVDM
+		 * commands over SOP'. In case the port partner initializes a
+		 * sequence when it is not allowed to send SOP' messages, drop
+		 * the message should the TCPM port try to process it.
+		 */
+		if (rx_sop_type == TCPC_TX_SOP_PRIME)
+			return 0;
+
 		switch (cmd) {
 		case CMD_DISCOVER_IDENT:
 			if (PD_VDO_VID(p[0]) != USB_SID_PD)
@@ -1703,55 +2006,186 @@ static int tcpm_pd_svdm(struct tcpm_port *port, struct typec_altmode *adev,
 			      (VDO_SVDM_VERS(typec_get_negotiated_svdm_version(typec)));
 		break;
 	case CMDT_RSP_ACK:
-		/* silently drop message if we are not connected */
-		if (IS_ERR_OR_NULL(port->partner))
+		/*
+		 * Silently drop message if we are not connected, but can process
+		 * if SOP' Discover Identity prior to explicit contract.
+		 */
+		if (IS_ERR_OR_NULL(port->partner) &&
+		    !(rx_sop_type == TCPC_TX_SOP_PRIME && cmd == CMD_DISCOVER_IDENT))
 			break;
 
 		tcpm_ams_finish(port);
 
 		switch (cmd) {
+		/*
+		 * SVDM Command Flow for SOP and SOP':
+		 * SOP		Discover Identity
+		 * SOP'		Discover Identity
+		 * SOP		Discover SVIDs
+		 *		Discover Modes
+		 * (Active Cables)
+		 * SOP'		Discover SVIDs
+		 *		Discover Modes
+		 *
+		 * Perform Discover SOP' if the port can communicate with cable
+		 * plug.
+		 */
 		case CMD_DISCOVER_IDENT:
-			if (PD_VDO_SVDM_VER(p[0]) < svdm_version)
-				typec_partner_set_svdm_version(port->partner,
-							       PD_VDO_SVDM_VER(p[0]));
-			/* 6.4.4.3.1 */
-			svdm_consume_identity(port, p, cnt);
-			response[0] = VDO(USB_SID_PD, 1, typec_get_negotiated_svdm_version(typec),
-					  CMD_DISCOVER_SVID);
-			rlen = 1;
+			switch (rx_sop_type) {
+			case TCPC_TX_SOP:
+				if (PD_VDO_SVDM_VER(p[0]) < svdm_version) {
+					typec_partner_set_svdm_version(port->partner,
+								       PD_VDO_SVDM_VER(p[0]));
+					/* If cable is discovered before partner, downgrade svdm */
+					if (!IS_ERR_OR_NULL(port->cable) &&
+					    (typec_get_cable_svdm_version(port->typec_port) >
+					    svdm_version))
+						typec_cable_set_svdm_version(port->cable,
+									     svdm_version);
+				}
+				/* 6.4.4.3.1 */
+				svdm_consume_identity(port, p, cnt);
+				/* Attempt Vconn swap, delay SOP' discovery if necessary */
+				if (tcpm_attempt_vconn_swap_discovery(port)) {
+					port->send_discover_prime = true;
+					port->upcoming_state = VCONN_SWAP_SEND;
+					ret = tcpm_ams_start(port, VCONN_SWAP);
+					if (!ret)
+						return 0;
+					/* Cannot perform Vconn swap */
+					port->upcoming_state = INVALID_STATE;
+					port->send_discover_prime = false;
+				}
+
+				/*
+				 * Attempt Discover Identity on SOP' if the
+				 * cable was not discovered previously, and use
+				 * the SVDM version of the partner to probe.
+				 */
+				if (IS_ERR_OR_NULL(port->cable) &&
+				    tcpm_can_communicate_sop_prime(port)) {
+					*response_tx_sop_type = TCPC_TX_SOP_PRIME;
+					port->send_discover_prime = true;
+					response[0] = VDO(USB_SID_PD, 1,
+							  typec_get_negotiated_svdm_version(typec),
+							  CMD_DISCOVER_IDENT);
+					rlen = 1;
+				} else {
+					*response_tx_sop_type = TCPC_TX_SOP;
+					response[0] = VDO(USB_SID_PD, 1,
+							  typec_get_negotiated_svdm_version(typec),
+							  CMD_DISCOVER_SVID);
+					rlen = 1;
+				}
+				break;
+			case TCPC_TX_SOP_PRIME:
+				/*
+				 * svdm_consume_identity_sop_prime will determine
+				 * the svdm_version for the cable moving forward.
+				 */
+				svdm_consume_identity_sop_prime(port, p, cnt);
+
+				/*
+				 * If received in SRC_VDM_IDENTITY_REQUEST, continue
+				 * to SRC_SEND_CAPABILITIES
+				 */
+				if (port->state == SRC_VDM_IDENTITY_REQUEST) {
+					tcpm_set_state(port, SRC_SEND_CAPABILITIES, 0);
+					return 0;
+				}
+
+				*response_tx_sop_type = TCPC_TX_SOP;
+				response[0] = VDO(USB_SID_PD, 1,
+						  typec_get_negotiated_svdm_version(typec),
+						  CMD_DISCOVER_SVID);
+				rlen = 1;
+				break;
+			default:
+				return 0;
+			}
 			break;
 		case CMD_DISCOVER_SVID:
+			*response_tx_sop_type = rx_sop_type;
 			/* 6.4.4.3.2 */
-			if (svdm_consume_svids(port, p, cnt)) {
+			if (svdm_consume_svids(port, p, cnt, rx_sop_type)) {
 				response[0] = VDO(USB_SID_PD, 1, svdm_version, CMD_DISCOVER_SVID);
 				rlen = 1;
-			} else if (modep->nsvids && supports_modal(port)) {
-				response[0] = VDO(modep->svids[0], 1, svdm_version,
-						  CMD_DISCOVER_MODES);
-				rlen = 1;
+			} else {
+				if (rx_sop_type == TCPC_TX_SOP) {
+					if (modep->nsvids && supports_modal(port)) {
+						response[0] = VDO(modep->svids[0], 1, svdm_version,
+								CMD_DISCOVER_MODES);
+						rlen = 1;
+					}
+				} else if (rx_sop_type == TCPC_TX_SOP_PRIME) {
+					if (modep_prime->nsvids) {
+						response[0] = VDO(modep_prime->svids[0], 1,
+								  svdm_version, CMD_DISCOVER_MODES);
+						rlen = 1;
+					}
+				}
 			}
 			break;
 		case CMD_DISCOVER_MODES:
-			/* 6.4.4.3.3 */
-			svdm_consume_modes(port, p, cnt);
-			modep->svid_index++;
-			if (modep->svid_index < modep->nsvids) {
-				u16 svid = modep->svids[modep->svid_index];
-				response[0] = VDO(svid, 1, svdm_version, CMD_DISCOVER_MODES);
-				rlen = 1;
-			} else {
-				tcpm_register_partner_altmodes(port);
+			if (rx_sop_type == TCPC_TX_SOP) {
+				/* 6.4.4.3.3 */
+				svdm_consume_modes(port, p, cnt, rx_sop_type);
+				modep->svid_index++;
+				if (modep->svid_index < modep->nsvids) {
+					u16 svid = modep->svids[modep->svid_index];
+					*response_tx_sop_type = TCPC_TX_SOP;
+					response[0] = VDO(svid, 1, svdm_version,
+							  CMD_DISCOVER_MODES);
+					rlen = 1;
+				} else if (tcpm_cable_vdm_supported(port)) {
+					*response_tx_sop_type = TCPC_TX_SOP_PRIME;
+					response[0] = VDO(USB_SID_PD, 1,
+							  typec_get_cable_svdm_version(typec),
+							  CMD_DISCOVER_SVID);
+					rlen = 1;
+				} else {
+					tcpm_register_partner_altmodes(port);
+				}
+			} else if (rx_sop_type == TCPC_TX_SOP_PRIME) {
+				/* 6.4.4.3.3 */
+				svdm_consume_modes(port, p, cnt, rx_sop_type);
+				modep_prime->svid_index++;
+				if (modep_prime->svid_index < modep_prime->nsvids) {
+					u16 svid = modep_prime->svids[modep_prime->svid_index];
+					*response_tx_sop_type = TCPC_TX_SOP_PRIME;
+					response[0] = VDO(svid, 1,
+							  typec_get_cable_svdm_version(typec),
+							  CMD_DISCOVER_MODES);
+					rlen = 1;
+				} else {
+					tcpm_register_plug_altmodes(port);
+					tcpm_register_partner_altmodes(port);
+				}
 			}
 			break;
 		case CMD_ENTER_MODE:
-			if (adev && pdev)
-				*adev_action = ADEV_QUEUE_VDM_SEND_EXIT_MODE_ON_FAIL;
+			*response_tx_sop_type = rx_sop_type;
+			if (rx_sop_type == TCPC_TX_SOP) {
+				if (adev && pdev) {
+					typec_altmode_update_active(pdev, true);
+					*adev_action = ADEV_QUEUE_VDM_SEND_EXIT_MODE_ON_FAIL;
+				}
+			} else if (rx_sop_type == TCPC_TX_SOP_PRIME) {
+				if (adev && pdev_prime) {
+					typec_altmode_update_active(pdev_prime, true);
+					*adev_action = ADEV_QUEUE_VDM_SEND_EXIT_MODE_ON_FAIL;
+				}
+			}
 			return 0;
 		case CMD_EXIT_MODE:
-			if (adev && pdev) {
-				/* Back to USB Operation */
-				*adev_action = ADEV_NOTIFY_USB_AND_QUEUE_VDM;
-				return 0;
+			*response_tx_sop_type = rx_sop_type;
+			if (rx_sop_type == TCPC_TX_SOP) {
+				if (adev && pdev) {
+					typec_altmode_update_active(pdev, false);
+					/* Back to USB Operation */
+					*adev_action = ADEV_NOTIFY_USB_AND_QUEUE_VDM;
+					return 0;
+				}
 			}
 			break;
 		case VDO_CMD_VENDOR(0) ... VDO_CMD_VENDOR(15):
@@ -1804,13 +2238,15 @@ static void tcpm_pd_handle_msg(struct tcpm_port *port,
 			       enum tcpm_ams ams);
 
 static void tcpm_handle_vdm_request(struct tcpm_port *port,
-				    const __le32 *payload, int cnt)
+				    const __le32 *payload, int cnt,
+				    enum tcpm_transmit_type rx_sop_type)
 {
 	enum adev_actions adev_action = ADEV_NONE;
 	struct typec_altmode *adev;
 	u32 p[PD_MAX_PAYLOAD];
 	u32 response[8] = { };
 	int i, rlen = 0;
+	enum tcpm_transmit_type response_tx_sop_type = TCPC_TX_SOP;
 
 	for (i = 0; i < cnt; i++)
 		p[i] = le32_to_cpu(payload[i]);
@@ -1845,7 +2281,8 @@ static void tcpm_handle_vdm_request(struct tcpm_port *port,
 		 *  - We will send NAK and the flag will be cleared in the state machine.
 		 */
 		port->vdm_sm_running = true;
-		rlen = tcpm_pd_svdm(port, adev, p, cnt, response, &adev_action);
+		rlen = tcpm_pd_svdm(port, adev, p, cnt, response, &adev_action,
+				    rx_sop_type, &response_tx_sop_type);
 	} else {
 		if (port->negotiated_rev >= PD_REV30)
 			tcpm_pd_handle_msg(port, PD_MSG_CTRL_NOT_SUPP, NONE_AMS);
@@ -1881,19 +2318,37 @@ static void tcpm_handle_vdm_request(struct tcpm_port *port,
 			typec_altmode_vdm(adev, p[0], &p[1], cnt);
 			break;
 		case ADEV_QUEUE_VDM:
-			typec_altmode_vdm(adev, p[0], &p[1], cnt);
+			if (response_tx_sop_type == TCPC_TX_SOP_PRIME)
+				typec_cable_altmode_vdm(adev, TYPEC_PLUG_SOP_P, p[0], &p[1], cnt);
+			else
+				typec_altmode_vdm(adev, p[0], &p[1], cnt);
 			break;
 		case ADEV_QUEUE_VDM_SEND_EXIT_MODE_ON_FAIL:
-			if (typec_altmode_vdm(adev, p[0], &p[1], cnt)) {
-				int svdm_version = typec_get_negotiated_svdm_version(
-									port->typec_port);
-				if (svdm_version < 0)
-					break;
-
-				response[0] = VDO(adev->svid, 1, svdm_version,
-						  CMD_EXIT_MODE);
-				response[0] |= VDO_OPOS(adev->mode);
-				rlen = 1;
+			if (response_tx_sop_type == TCPC_TX_SOP_PRIME) {
+				if (typec_cable_altmode_vdm(adev, TYPEC_PLUG_SOP_P,
+							    p[0], &p[1], cnt)) {
+					int svdm_version = typec_get_cable_svdm_version(
+										port->typec_port);
+					if (svdm_version < 0)
+						break;
+
+					response[0] = VDO(adev->svid, 1, svdm_version,
+							CMD_EXIT_MODE);
+					response[0] |= VDO_OPOS(adev->mode);
+					rlen = 1;
+				}
+			} else {
+				if (typec_altmode_vdm(adev, p[0], &p[1], cnt)) {
+					int svdm_version = typec_get_negotiated_svdm_version(
+										port->typec_port);
+					if (svdm_version < 0)
+						break;
+
+					response[0] = VDO(adev->svid, 1, svdm_version,
+							CMD_EXIT_MODE);
+					response[0] |= VDO_OPOS(adev->mode);
+					rlen = 1;
+				}
 			}
 			break;
 		case ADEV_ATTENTION:
@@ -1913,19 +2368,38 @@ static void tcpm_handle_vdm_request(struct tcpm_port *port,
 	mutex_lock(&port->lock);
 
 	if (rlen > 0)
-		tcpm_queue_vdm(port, response[0], &response[1], rlen - 1);
+		tcpm_queue_vdm(port, response[0], &response[1], rlen - 1, response_tx_sop_type);
 	else
 		port->vdm_sm_running = false;
 }
 
 static void tcpm_send_vdm(struct tcpm_port *port, u32 vid, int cmd,
-			  const u32 *data, int count)
+			  const u32 *data, int count, enum tcpm_transmit_type tx_sop_type)
 {
-	int svdm_version = typec_get_negotiated_svdm_version(port->typec_port);
+	int svdm_version;
 	u32 header;
 
-	if (svdm_version < 0)
-		return;
+	switch (tx_sop_type) {
+	case TCPC_TX_SOP_PRIME:
+		/*
+		 * If the port partner is discovered, then the port partner's
+		 * SVDM Version will be returned
+		 */
+		svdm_version = typec_get_cable_svdm_version(port->typec_port);
+		if (svdm_version < 0)
+			svdm_version = SVDM_VER_MAX;
+		break;
+	case TCPC_TX_SOP:
+		svdm_version = typec_get_negotiated_svdm_version(port->typec_port);
+		if (svdm_version < 0)
+			return;
+		break;
+	default:
+		svdm_version = typec_get_negotiated_svdm_version(port->typec_port);
+		if (svdm_version < 0)
+			return;
+		break;
+	}
 
 	if (WARN_ON(count > VDO_MAX_SIZE - 1))
 		count = VDO_MAX_SIZE - 1;
@@ -1934,7 +2408,7 @@ static void tcpm_send_vdm(struct tcpm_port *port, u32 vid, int cmd,
 	header = VDO(vid, ((vid & USB_SID_PD) == USB_SID_PD) ?
 			1 : (PD_VDO_CMD(cmd) <= CMD_ATTENTION),
 			svdm_version, cmd);
-	tcpm_queue_vdm(port, header, data, count);
+	tcpm_queue_vdm(port, header, data, count, tx_sop_type);
 }
 
 static unsigned int vdm_ready_timeout(u32 vdm_hdr)
@@ -1968,6 +2442,7 @@ static void vdm_run_state_machine(struct tcpm_port *port)
 	struct pd_message msg;
 	int i, res = 0;
 	u32 vdo_hdr = port->vdo_data[0];
+	u32 response[8] = { };
 
 	switch (port->vdm_state) {
 	case VDM_STATE_READY:
@@ -1981,7 +2456,8 @@ static void vdm_run_state_machine(struct tcpm_port *port)
 		 * if there's traffic or we're not in PDO ready state don't send
 		 * a VDM.
 		 */
-		if (port->state != SRC_READY && port->state != SNK_READY) {
+		if (port->state != SRC_READY && port->state != SNK_READY &&
+		    port->state != SRC_VDM_IDENTITY_REQUEST) {
 			port->vdm_sm_running = false;
 			break;
 		}
@@ -1992,7 +2468,17 @@ static void vdm_run_state_machine(struct tcpm_port *port)
 			case CMD_DISCOVER_IDENT:
 				res = tcpm_ams_start(port, DISCOVER_IDENTITY);
 				if (res == 0) {
-					port->send_discover = false;
+					switch (port->tx_sop_type) {
+					case TCPC_TX_SOP_PRIME:
+						port->send_discover_prime = false;
+						break;
+					case TCPC_TX_SOP:
+						port->send_discover = false;
+						break;
+					default:
+						port->send_discover = false;
+						break;
+					}
 				} else if (res == -EAGAIN) {
 					port->vdo_data[0] = 0;
 					mod_send_discover_delayed_work(port,
@@ -2048,12 +2534,21 @@ static void vdm_run_state_machine(struct tcpm_port *port)
 		break;
 	case VDM_STATE_ERR_SEND:
 		/*
+		 * When sending Discover Identity to SOP' before establishing an
+		 * explicit contract, do not retry. Instead, weave sending
+		 * Source_Capabilities over SOP and Discover Identity over SOP'.
+		 */
+		if (port->state == SRC_VDM_IDENTITY_REQUEST) {
+			tcpm_ams_finish(port);
+			port->vdm_state = VDM_STATE_DONE;
+			tcpm_set_state(port, SRC_SEND_CAPABILITIES, 0);
+		/*
 		 * A partner which does not support USB PD will not reply,
 		 * so this is not a fatal error. At the same time, some
 		 * devices may not return GoodCRC under some circumstances,
 		 * so we need to retry.
 		 */
-		if (port->vdm_retries < 3) {
+		} else if (port->vdm_retries < 3) {
 			tcpm_log(port, "VDM Tx error, retry");
 			port->vdm_retries++;
 			port->vdm_state = VDM_STATE_READY;
@@ -2061,19 +2556,59 @@ static void vdm_run_state_machine(struct tcpm_port *port)
 				tcpm_ams_finish(port);
 		} else {
 			tcpm_ams_finish(port);
+			if (port->tx_sop_type == TCPC_TX_SOP)
+				break;
+			/* Handle SOP' Transmission Errors */
+			switch (PD_VDO_CMD(vdo_hdr)) {
+			/*
+			 * If Discover Identity fails on SOP', then resume
+			 * discovery process on SOP only.
+			 */
+			case CMD_DISCOVER_IDENT:
+				port->vdo_data[0] = 0;
+				response[0] = VDO(USB_SID_PD, 1,
+						  typec_get_negotiated_svdm_version(
+									port->typec_port),
+						  CMD_DISCOVER_SVID);
+				tcpm_queue_vdm(port, response[0], &response[1],
+					       0, TCPC_TX_SOP);
+				break;
+			/*
+			 * If Discover SVIDs or Discover Modes fail, then
+			 * proceed with Alt Mode discovery process on SOP.
+			 */
+			case CMD_DISCOVER_SVID:
+				tcpm_register_partner_altmodes(port);
+				break;
+			case CMD_DISCOVER_MODES:
+				tcpm_register_partner_altmodes(port);
+				break;
+			default:
+				break;
+			}
 		}
 		break;
 	case VDM_STATE_SEND_MESSAGE:
 		/* Prepare and send VDM */
 		memset(&msg, 0, sizeof(msg));
-		msg.header = PD_HEADER_LE(PD_DATA_VENDOR_DEF,
-					  port->pwr_role,
-					  port->data_role,
-					  port->negotiated_rev,
-					  port->message_id, port->vdo_count);
+		if (port->tx_sop_type == TCPC_TX_SOP_PRIME) {
+			msg.header = PD_HEADER_LE(PD_DATA_VENDOR_DEF,
+						  0,	/* Cable Plug Indicator for DFP/UFP */
+						  0,	/* Reserved */
+						  port->negotiated_rev_prime,
+						  port->message_id_prime,
+						  port->vdo_count);
+		} else {
+			msg.header = PD_HEADER_LE(PD_DATA_VENDOR_DEF,
+						  port->pwr_role,
+						  port->data_role,
+						  port->negotiated_rev,
+						  port->message_id,
+						  port->vdo_count);
+		}
 		for (i = 0; i < port->vdo_count; i++)
 			msg.payload[i] = cpu_to_le32(port->vdo_data[i]);
-		res = tcpm_pd_transmit(port, TCPC_TX_SOP, &msg);
+		res = tcpm_pd_transmit(port, port->tx_sop_type, &msg);
 		if (res < 0) {
 			port->vdm_state = VDM_STATE_ERR_SEND;
 		} else {
@@ -2248,7 +2783,7 @@ static int tcpm_altmode_enter(struct typec_altmode *altmode, u32 *vdo)
 	header = VDO(altmode->svid, vdo ? 2 : 1, svdm_version, CMD_ENTER_MODE);
 	header |= VDO_OPOS(altmode->mode);
 
-	tcpm_queue_vdm_unlocked(port, header, vdo, vdo ? 1 : 0);
+	tcpm_queue_vdm_unlocked(port, header, vdo, vdo ? 1 : 0, TCPC_TX_SOP);
 	return 0;
 }
 
@@ -2265,7 +2800,7 @@ static int tcpm_altmode_exit(struct typec_altmode *altmode)
 	header = VDO(altmode->svid, 1, svdm_version, CMD_EXIT_MODE);
 	header |= VDO_OPOS(altmode->mode);
 
-	tcpm_queue_vdm_unlocked(port, header, NULL, 0);
+	tcpm_queue_vdm_unlocked(port, header, NULL, 0, TCPC_TX_SOP);
 	return 0;
 }
 
@@ -2274,7 +2809,7 @@ static int tcpm_altmode_vdm(struct typec_altmode *altmode,
 {
 	struct tcpm_port *port = typec_altmode_get_drvdata(altmode);
 
-	tcpm_queue_vdm_unlocked(port, header, data, count - 1);
+	tcpm_queue_vdm_unlocked(port, header, data, count - 1, TCPC_TX_SOP);
 
 	return 0;
 }
@@ -2285,6 +2820,58 @@ static const struct typec_altmode_ops tcpm_altmode_ops = {
 	.vdm = tcpm_altmode_vdm,
 };
 
+
+static int tcpm_cable_altmode_enter(struct typec_altmode *altmode, enum typec_plug_index sop,
+				    u32 *vdo)
+{
+	struct tcpm_port *port = typec_altmode_get_drvdata(altmode);
+	int svdm_version;
+	u32 header;
+
+	svdm_version = typec_get_cable_svdm_version(port->typec_port);
+	if (svdm_version < 0)
+		return svdm_version;
+
+	header = VDO(altmode->svid, vdo ? 2 : 1, svdm_version, CMD_ENTER_MODE);
+	header |= VDO_OPOS(altmode->mode);
+
+	tcpm_queue_vdm_unlocked(port, header, vdo, vdo ? 1 : 0, TCPC_TX_SOP_PRIME);
+	return 0;
+}
+
+static int tcpm_cable_altmode_exit(struct typec_altmode *altmode, enum typec_plug_index sop)
+{
+	struct tcpm_port *port = typec_altmode_get_drvdata(altmode);
+	int svdm_version;
+	u32 header;
+
+	svdm_version = typec_get_cable_svdm_version(port->typec_port);
+	if (svdm_version < 0)
+		return svdm_version;
+
+	header = VDO(altmode->svid, 1, svdm_version, CMD_EXIT_MODE);
+	header |= VDO_OPOS(altmode->mode);
+
+	tcpm_queue_vdm_unlocked(port, header, NULL, 0, TCPC_TX_SOP_PRIME);
+	return 0;
+}
+
+static int tcpm_cable_altmode_vdm(struct typec_altmode *altmode, enum typec_plug_index sop,
+				  u32 header, const u32 *data, int count)
+{
+	struct tcpm_port *port = typec_altmode_get_drvdata(altmode);
+
+	tcpm_queue_vdm_unlocked(port, header, data, count - 1, TCPC_TX_SOP_PRIME);
+
+	return 0;
+}
+
+static const struct typec_cable_ops tcpm_cable_ops = {
+	.enter = tcpm_cable_altmode_enter,
+	.exit = tcpm_cable_altmode_exit,
+	.vdm = tcpm_cable_altmode_vdm,
+};
+
 /*
  * PD (data, control) command handling functions
  */
@@ -2297,7 +2884,8 @@ static inline enum tcpm_state ready_state(struct tcpm_port *port)
 }
 
 static int tcpm_pd_send_control(struct tcpm_port *port,
-				enum pd_ctrl_msg_type type);
+				enum pd_ctrl_msg_type type,
+				enum tcpm_transmit_type tx_sop_type);
 
 static void tcpm_handle_alert(struct tcpm_port *port, const __le32 *payload,
 			      int cnt)
@@ -2416,7 +3004,7 @@ static int tcpm_register_source_caps(struct tcpm_port *port)
 {
 	struct usb_power_delivery_desc desc = { port->negotiated_rev };
 	struct usb_power_delivery_capabilities_desc caps = { };
-	struct usb_power_delivery_capabilities *cap;
+	struct usb_power_delivery_capabilities *cap = port->partner_source_caps;
 
 	if (!port->partner_pd)
 		port->partner_pd = usb_power_delivery_register(NULL, &desc);
@@ -2426,6 +3014,11 @@ static int tcpm_register_source_caps(struct tcpm_port *port)
 	memcpy(caps.pdo, port->source_caps, sizeof(u32) * port->nr_source_caps);
 	caps.role = TYPEC_SOURCE;
 
+	if (cap) {
+		usb_power_delivery_unregister_capabilities(cap);
+		port->partner_source_caps = NULL;
+	}
+
 	cap = usb_power_delivery_register_capabilities(port->partner_pd, &caps);
 	if (IS_ERR(cap))
 		return PTR_ERR(cap);
@@ -2439,7 +3032,7 @@ static int tcpm_register_sink_caps(struct tcpm_port *port)
 {
 	struct usb_power_delivery_desc desc = { port->negotiated_rev };
 	struct usb_power_delivery_capabilities_desc caps = { };
-	struct usb_power_delivery_capabilities *cap = port->partner_source_caps;
+	struct usb_power_delivery_capabilities *cap;
 
 	if (!port->partner_pd)
 		port->partner_pd = usb_power_delivery_register(NULL, &desc);
@@ -2449,9 +3042,6 @@ static int tcpm_register_sink_caps(struct tcpm_port *port)
 	memcpy(caps.pdo, port->sink_caps, sizeof(u32) * port->nr_sink_caps);
 	caps.role = TYPEC_SINK;
 
-	if (cap)
-		usb_power_delivery_unregister_capabilities(cap);
-
 	cap = usb_power_delivery_register_capabilities(port->partner_pd, &caps);
 	if (IS_ERR(cap))
 		return PTR_ERR(cap);
@@ -2462,7 +3052,8 @@ static int tcpm_register_sink_caps(struct tcpm_port *port)
 }
 
 static void tcpm_pd_data_request(struct tcpm_port *port,
-				 const struct pd_message *msg)
+				 const struct pd_message *msg,
+				 enum tcpm_transmit_type rx_sop_type)
 {
 	enum pd_data_msg_type type = pd_header_type_le(msg->header);
 	unsigned int cnt = pd_header_cnt_le(msg->header);
@@ -2503,8 +3094,11 @@ static void tcpm_pd_data_request(struct tcpm_port *port,
 			break;
 		}
 
-		if (rev < PD_MAX_REV)
+		if (rev < PD_MAX_REV) {
 			port->negotiated_rev = rev;
+			if (port->negotiated_rev_prime > port->negotiated_rev)
+				port->negotiated_rev_prime = port->negotiated_rev;
+		}
 
 		if (port->pwr_role == TYPEC_SOURCE) {
 			if (port->ams == GET_SOURCE_CAPABILITIES)
@@ -2555,8 +3149,11 @@ static void tcpm_pd_data_request(struct tcpm_port *port,
 			break;
 		}
 
-		if (rev < PD_MAX_REV)
+		if (rev < PD_MAX_REV) {
 			port->negotiated_rev = rev;
+			if (port->negotiated_rev_prime > port->negotiated_rev)
+				port->negotiated_rev_prime = port->negotiated_rev;
+		}
 
 		if (port->pwr_role != TYPEC_SOURCE || cnt != 1) {
 			tcpm_pd_handle_msg(port,
@@ -2612,7 +3209,7 @@ static void tcpm_pd_data_request(struct tcpm_port *port,
 					   NONE_AMS);
 		break;
 	case PD_DATA_VENDOR_DEF:
-		tcpm_handle_vdm_request(port, msg->payload, cnt);
+		tcpm_handle_vdm_request(port, msg->payload, cnt, rx_sop_type);
 		break;
 	case PD_DATA_BIST:
 		port->bist_request = le32_to_cpu(msg->payload[0]);
@@ -2654,10 +3251,12 @@ static void tcpm_pps_complete(struct tcpm_port *port, int result)
 }
 
 static void tcpm_pd_ctrl_request(struct tcpm_port *port,
-				 const struct pd_message *msg)
+				 const struct pd_message *msg,
+				 enum tcpm_transmit_type rx_sop_type)
 {
 	enum pd_ctrl_msg_type type = pd_header_type_le(msg->header);
 	enum tcpm_state next_state;
+	unsigned int rev = pd_header_rev_le(msg->header);
 
 	/*
 	 * Stop VDM state machine if interrupted by other Messages while NOT_SUPP is allowed in
@@ -2822,6 +3421,16 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
 		case SOFT_RESET_SEND:
 			if (port->ams == SOFT_RESET_AMS)
 				tcpm_ams_finish(port);
+			/*
+			 * SOP' Soft Reset is done after Vconn Swap,
+			 * which returns to ready state
+			 */
+			if (rx_sop_type == TCPC_TX_SOP_PRIME) {
+				if (rev < port->negotiated_rev_prime)
+					port->negotiated_rev_prime = rev;
+				tcpm_set_state(port, ready_state(port), 0);
+				break;
+			}
 			if (port->pwr_role == TYPEC_SOURCE) {
 				port->upcoming_state = SRC_SEND_CAPABILITIES;
 				tcpm_ams_start(port, POWER_NEGOTIATION);
@@ -2988,6 +3597,7 @@ static void tcpm_pd_rx_handler(struct kthread_work *work)
 	const struct pd_message *msg = &event->msg;
 	unsigned int cnt = pd_header_cnt_le(msg->header);
 	struct tcpm_port *port = event->port;
+	enum tcpm_transmit_type rx_sop_type = event->rx_sop_type;
 
 	mutex_lock(&port->lock);
 
@@ -2999,6 +3609,14 @@ static void tcpm_pd_rx_handler(struct kthread_work *work)
 		unsigned int msgid = pd_header_msgid_le(msg->header);
 
 		/*
+		 * Drop SOP' messages if cannot receive via
+		 * tcpm_can_communicate_sop_prime
+		 */
+		if (rx_sop_type == TCPC_TX_SOP_PRIME &&
+		    !tcpm_can_communicate_sop_prime(port))
+			goto done;
+
+		/*
 		 * USB PD standard, 6.6.1.2:
 		 * "... if MessageID value in a received Message is the
 		 * same as the stored value, the receiver shall return a
@@ -3007,16 +3625,26 @@ static void tcpm_pd_rx_handler(struct kthread_work *work)
 		 * Message). Note: this shall not apply to the Soft_Reset
 		 * Message which always has a MessageID value of zero."
 		 */
-		if (msgid == port->rx_msgid && type != PD_CTRL_SOFT_RESET)
-			goto done;
-		port->rx_msgid = msgid;
+		switch (rx_sop_type) {
+		case TCPC_TX_SOP_PRIME:
+			if (msgid == port->rx_msgid_prime)
+				goto done;
+			port->rx_msgid_prime = msgid;
+			break;
+		case TCPC_TX_SOP:
+		default:
+			if (msgid == port->rx_msgid && type != PD_CTRL_SOFT_RESET)
+				goto done;
+			port->rx_msgid = msgid;
+			break;
+		}
 
 		/*
 		 * If both ends believe to be DFP/host, we have a data role
 		 * mismatch.
 		 */
 		if (!!(le16_to_cpu(msg->header) & PD_HEADER_DATA_ROLE) ==
-		    (port->data_role == TYPEC_HOST)) {
+		    (port->data_role == TYPEC_HOST) && rx_sop_type == TCPC_TX_SOP) {
 			tcpm_log(port,
 				 "Data role mismatch, initiating error recovery");
 			tcpm_set_state(port, ERROR_RECOVERY, 0);
@@ -3024,9 +3652,9 @@ static void tcpm_pd_rx_handler(struct kthread_work *work)
 			if (le16_to_cpu(msg->header) & PD_HEADER_EXT_HDR)
 				tcpm_pd_ext_msg_request(port, msg);
 			else if (cnt)
-				tcpm_pd_data_request(port, msg);
+				tcpm_pd_data_request(port, msg, rx_sop_type);
 			else
-				tcpm_pd_ctrl_request(port, msg);
+				tcpm_pd_ctrl_request(port, msg, rx_sop_type);
 		}
 	}
 
@@ -3035,7 +3663,8 @@ done:
 	kfree(event);
 }
 
-void tcpm_pd_receive(struct tcpm_port *port, const struct pd_message *msg)
+void tcpm_pd_receive(struct tcpm_port *port, const struct pd_message *msg,
+		     enum tcpm_transmit_type rx_sop_type)
 {
 	struct pd_rx_event *event;
 
@@ -3045,23 +3674,47 @@ void tcpm_pd_receive(struct tcpm_port *port, const struct pd_message *msg)
 
 	kthread_init_work(&event->work, tcpm_pd_rx_handler);
 	event->port = port;
+	event->rx_sop_type = rx_sop_type;
 	memcpy(&event->msg, msg, sizeof(*msg));
 	kthread_queue_work(port->wq, &event->work);
 }
 EXPORT_SYMBOL_GPL(tcpm_pd_receive);
 
 static int tcpm_pd_send_control(struct tcpm_port *port,
-				enum pd_ctrl_msg_type type)
+				enum pd_ctrl_msg_type type,
+				enum tcpm_transmit_type tx_sop_type)
 {
 	struct pd_message msg;
 
 	memset(&msg, 0, sizeof(msg));
-	msg.header = PD_HEADER_LE(type, port->pwr_role,
-				  port->data_role,
-				  port->negotiated_rev,
-				  port->message_id, 0);
+	switch (tx_sop_type) {
+	case TCPC_TX_SOP_PRIME:
+		msg.header = PD_HEADER_LE(type,
+					  0,	/* Cable Plug Indicator for DFP/UFP */
+					  0,	/* Reserved */
+					  port->negotiated_rev,
+					  port->message_id_prime,
+					  0);
+		break;
+	case TCPC_TX_SOP:
+		msg.header = PD_HEADER_LE(type,
+					  port->pwr_role,
+					  port->data_role,
+					  port->negotiated_rev,
+					  port->message_id,
+					  0);
+		break;
+	default:
+		msg.header = PD_HEADER_LE(type,
+					  port->pwr_role,
+					  port->data_role,
+					  port->negotiated_rev,
+					  port->message_id,
+					  0);
+		break;
+	}
 
-	return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg);
+	return tcpm_pd_transmit(port, tx_sop_type, &msg);
 }
 
 /*
@@ -3080,13 +3733,13 @@ static bool tcpm_send_queued_message(struct tcpm_port *port)
 
 		switch (queued_message) {
 		case PD_MSG_CTRL_WAIT:
-			tcpm_pd_send_control(port, PD_CTRL_WAIT);
+			tcpm_pd_send_control(port, PD_CTRL_WAIT, TCPC_TX_SOP);
 			break;
 		case PD_MSG_CTRL_REJECT:
-			tcpm_pd_send_control(port, PD_CTRL_REJECT);
+			tcpm_pd_send_control(port, PD_CTRL_REJECT, TCPC_TX_SOP);
 			break;
 		case PD_MSG_CTRL_NOT_SUPP:
-			tcpm_pd_send_control(port, PD_CTRL_NOT_SUPP);
+			tcpm_pd_send_control(port, PD_CTRL_NOT_SUPP, TCPC_TX_SOP);
 			break;
 		case PD_MSG_DATA_SINK_CAP:
 			ret = tcpm_pd_send_sink_caps(port);
@@ -3663,6 +4316,7 @@ static int tcpm_src_attach(struct tcpm_port *port)
 
 	port->attached = true;
 	port->send_discover = true;
+	port->send_discover_prime = false;
 
 	return 0;
 
@@ -3679,6 +4333,15 @@ out_disable_mux:
 
 static void tcpm_typec_disconnect(struct tcpm_port *port)
 {
+	/*
+	 * Unregister plug/cable outside of port->connected because cable can
+	 * be discovered before SRC_READY/SNK_READY states where port->connected
+	 * is set.
+	 */
+	typec_unregister_plug(port->plug_prime);
+	typec_unregister_cable(port->cable);
+	port->plug_prime = NULL;
+	port->cable = NULL;
 	if (port->connected) {
 		if (port->partner) {
 			typec_partner_set_usb_power_delivery(port->partner, NULL);
@@ -3692,14 +4355,20 @@ static void tcpm_typec_disconnect(struct tcpm_port *port)
 static void tcpm_unregister_altmodes(struct tcpm_port *port)
 {
 	struct pd_mode_data *modep = &port->mode_data;
+	struct pd_mode_data *modep_prime = &port->mode_data_prime;
 	int i;
 
 	for (i = 0; i < modep->altmodes; i++) {
 		typec_unregister_altmode(port->partner_altmode[i]);
 		port->partner_altmode[i] = NULL;
 	}
+	for (i = 0; i < modep_prime->altmodes; i++) {
+		typec_unregister_altmode(port->plug_prime_altmode[i]);
+		port->plug_prime_altmode[i] = NULL;
+	}
 
 	memset(modep, 0, sizeof(*modep));
+	memset(modep_prime, 0, sizeof(*modep_prime));
 }
 
 static void tcpm_set_partner_usb_comm_capable(struct tcpm_port *port, bool capable)
@@ -3728,6 +4397,7 @@ static void tcpm_reset_port(struct tcpm_port *port)
 	 * we can check tcpm_pd_rx_handler() if we had seen it before.
 	 */
 	port->rx_msgid = -1;
+	port->rx_msgid_prime = -1;
 
 	port->tcpc->set_pd_rx(port->tcpc, false);
 	tcpm_init_vbus(port);	/* also disables charging */
@@ -3799,6 +4469,7 @@ static int tcpm_snk_attach(struct tcpm_port *port)
 
 	port->attached = true;
 	port->send_discover = true;
+	port->send_discover_prime = false;
 
 	return 0;
 }
@@ -4042,8 +4713,11 @@ static void run_state_machine(struct tcpm_port *port)
 		port->pwr_opmode = TYPEC_PWR_MODE_USB;
 		port->caps_count = 0;
 		port->negotiated_rev = PD_MAX_REV;
+		port->negotiated_rev_prime = PD_MAX_REV;
 		port->message_id = 0;
+		port->message_id_prime = 0;
 		port->rx_msgid = -1;
+		port->rx_msgid_prime = -1;
 		port->explicit_contract = false;
 		/* SNK -> SRC POWER/FAST_ROLE_SWAP finished */
 		if (port->ams == POWER_ROLE_SWAP ||
@@ -4064,8 +4738,12 @@ static void run_state_machine(struct tcpm_port *port)
 		}
 		ret = tcpm_pd_send_source_caps(port);
 		if (ret < 0) {
-			tcpm_set_state(port, SRC_SEND_CAPABILITIES,
-				       PD_T_SEND_SOURCE_CAP);
+			if (tcpm_can_communicate_sop_prime(port) &&
+			    IS_ERR_OR_NULL(port->cable))
+				tcpm_set_state(port, SRC_VDM_IDENTITY_REQUEST, 0);
+			else
+				tcpm_set_state(port, SRC_SEND_CAPABILITIES,
+					       PD_T_SEND_SOURCE_CAP);
 		} else {
 			/*
 			 * Per standard, we should clear the reset counter here.
@@ -4106,7 +4784,7 @@ static void run_state_machine(struct tcpm_port *port)
 	case SRC_NEGOTIATE_CAPABILITIES:
 		ret = tcpm_pd_check_request(port);
 		if (ret < 0) {
-			tcpm_pd_send_control(port, PD_CTRL_REJECT);
+			tcpm_pd_send_control(port, PD_CTRL_REJECT, TCPC_TX_SOP);
 			if (!port->explicit_contract) {
 				tcpm_set_state(port,
 					       SRC_WAIT_NEW_CAPABILITIES, 0);
@@ -4114,7 +4792,7 @@ static void run_state_machine(struct tcpm_port *port)
 				tcpm_set_state(port, SRC_READY, 0);
 			}
 		} else {
-			tcpm_pd_send_control(port, PD_CTRL_ACCEPT);
+			tcpm_pd_send_control(port, PD_CTRL_ACCEPT, TCPC_TX_SOP);
 			tcpm_set_partner_usb_comm_capable(port,
 							  !!(port->sink_request & RDO_USB_COMM));
 			tcpm_set_state(port, SRC_TRANSITION_SUPPLY,
@@ -4123,7 +4801,7 @@ static void run_state_machine(struct tcpm_port *port)
 		break;
 	case SRC_TRANSITION_SUPPLY:
 		/* XXX: regulator_set_voltage(vbus, ...) */
-		tcpm_pd_send_control(port, PD_CTRL_PS_RDY);
+		tcpm_pd_send_control(port, PD_CTRL_PS_RDY, TCPC_TX_SOP);
 		port->explicit_contract = true;
 		typec_set_pwr_opmode(port->typec_port, TYPEC_PWR_MODE_PD);
 		port->pwr_opmode = TYPEC_PWR_MODE_PD;
@@ -4160,14 +4838,23 @@ static void run_state_machine(struct tcpm_port *port)
 		 * 6.4.4.3.1 Discover Identity
 		 * "The Discover Identity Command Shall only be sent to SOP when there is an
 		 * Explicit Contract."
-		 * For now, this driver only supports SOP for DISCOVER_IDENTITY, thus using
-		 * port->explicit_contract to decide whether to send the command.
+		 *
+		 * Discover Identity on SOP' should be discovered prior to the
+		 * ready state, but if done after a Vconn Swap following Discover
+		 * Identity on SOP then the discovery process can be run here
+		 * as well.
 		 */
 		if (port->explicit_contract) {
-			tcpm_set_initial_svdm_version(port);
+			if (port->send_discover_prime) {
+				port->tx_sop_type = TCPC_TX_SOP_PRIME;
+			} else {
+				port->tx_sop_type = TCPC_TX_SOP;
+				tcpm_set_initial_svdm_version(port);
+			}
 			mod_send_discover_delayed_work(port, 0);
 		} else {
 			port->send_discover = false;
+			port->send_discover_prime = false;
 		}
 
 		/*
@@ -4283,8 +4970,11 @@ static void run_state_machine(struct tcpm_port *port)
 		typec_set_pwr_opmode(port->typec_port, opmode);
 		port->pwr_opmode = TYPEC_PWR_MODE_USB;
 		port->negotiated_rev = PD_MAX_REV;
+		port->negotiated_rev_prime = PD_MAX_REV;
 		port->message_id = 0;
+		port->message_id_prime = 0;
 		port->rx_msgid = -1;
+		port->rx_msgid_prime = -1;
 		port->explicit_contract = false;
 
 		if (port->ams == POWER_ROLE_SWAP ||
@@ -4456,14 +5146,23 @@ static void run_state_machine(struct tcpm_port *port)
 		 * 6.4.4.3.1 Discover Identity
 		 * "The Discover Identity Command Shall only be sent to SOP when there is an
 		 * Explicit Contract."
-		 * For now, this driver only supports SOP for DISCOVER_IDENTITY, thus using
-		 * port->explicit_contract.
+		 *
+		 * Discover Identity on SOP' should be discovered prior to the
+		 * ready state, but if done after a Vconn Swap following Discover
+		 * Identity on SOP then the discovery process can be run here
+		 * as well.
 		 */
 		if (port->explicit_contract) {
-			tcpm_set_initial_svdm_version(port);
+			if (port->send_discover_prime) {
+				port->tx_sop_type = TCPC_TX_SOP_PRIME;
+			} else {
+				port->tx_sop_type = TCPC_TX_SOP;
+				tcpm_set_initial_svdm_version(port);
+			}
 			mod_send_discover_delayed_work(port, 0);
 		} else {
 			port->send_discover = false;
+			port->send_discover_prime = false;
 		}
 
 		power_supply_changed(port->psy);
@@ -4504,6 +5203,7 @@ static void run_state_machine(struct tcpm_port *port)
 		tcpm_unregister_altmodes(port);
 		port->nr_sink_caps = 0;
 		port->send_discover = true;
+		port->send_discover_prime = false;
 		if (port->pwr_role == TYPEC_SOURCE)
 			tcpm_set_state(port, SRC_HARD_RESET_VBUS_OFF,
 				       PD_T_PS_HARD_RESET);
@@ -4605,7 +5305,7 @@ static void run_state_machine(struct tcpm_port *port)
 		/* remove existing capabilities */
 		usb_power_delivery_unregister_capabilities(port->partner_source_caps);
 		port->partner_source_caps = NULL;
-		tcpm_pd_send_control(port, PD_CTRL_ACCEPT);
+		tcpm_pd_send_control(port, PD_CTRL_ACCEPT, TCPC_TX_SOP);
 		tcpm_ams_finish(port);
 		if (port->pwr_role == TYPEC_SOURCE) {
 			port->upcoming_state = SRC_SEND_CAPABILITIES;
@@ -4622,35 +5322,53 @@ static void run_state_machine(struct tcpm_port *port)
 		tcpm_ams_start(port, SOFT_RESET_AMS);
 		break;
 	case SOFT_RESET_SEND:
-		port->message_id = 0;
-		port->rx_msgid = -1;
-		/* remove existing capabilities */
-		usb_power_delivery_unregister_capabilities(port->partner_source_caps);
-		port->partner_source_caps = NULL;
-		if (tcpm_pd_send_control(port, PD_CTRL_SOFT_RESET))
-			tcpm_set_state_cond(port, hard_reset_state(port), 0);
-		else
-			tcpm_set_state_cond(port, hard_reset_state(port),
-					    PD_T_SENDER_RESPONSE);
+		/*
+		 * Power Delivery 3.0 Section 6.3.13
+		 *
+		 * A Soft_Reset Message Shall be targeted at a specific entity
+		 * depending on the type of SOP* packet used.
+		 */
+		if (port->tx_sop_type == TCPC_TX_SOP_PRIME) {
+			port->message_id_prime = 0;
+			port->rx_msgid_prime = -1;
+			tcpm_pd_send_control(port, PD_CTRL_SOFT_RESET, TCPC_TX_SOP_PRIME);
+			tcpm_set_state_cond(port, ready_state(port), PD_T_SENDER_RESPONSE);
+		} else {
+			port->message_id = 0;
+			port->rx_msgid = -1;
+			/* remove existing capabilities */
+			usb_power_delivery_unregister_capabilities(port->partner_source_caps);
+			port->partner_source_caps = NULL;
+			if (tcpm_pd_send_control(port, PD_CTRL_SOFT_RESET, TCPC_TX_SOP))
+				tcpm_set_state_cond(port, hard_reset_state(port), 0);
+			else
+				tcpm_set_state_cond(port, hard_reset_state(port),
+						    PD_T_SENDER_RESPONSE);
+		}
 		break;
 
 	/* DR_Swap states */
 	case DR_SWAP_SEND:
-		tcpm_pd_send_control(port, PD_CTRL_DR_SWAP);
-		if (port->data_role == TYPEC_DEVICE || port->negotiated_rev > PD_REV20)
+		tcpm_pd_send_control(port, PD_CTRL_DR_SWAP, TCPC_TX_SOP);
+		if (port->data_role == TYPEC_DEVICE || port->negotiated_rev > PD_REV20) {
 			port->send_discover = true;
+			port->send_discover_prime = false;
+		}
 		tcpm_set_state_cond(port, DR_SWAP_SEND_TIMEOUT,
 				    PD_T_SENDER_RESPONSE);
 		break;
 	case DR_SWAP_ACCEPT:
-		tcpm_pd_send_control(port, PD_CTRL_ACCEPT);
-		if (port->data_role == TYPEC_DEVICE || port->negotiated_rev > PD_REV20)
+		tcpm_pd_send_control(port, PD_CTRL_ACCEPT, TCPC_TX_SOP);
+		if (port->data_role == TYPEC_DEVICE || port->negotiated_rev > PD_REV20) {
 			port->send_discover = true;
+			port->send_discover_prime = false;
+		}
 		tcpm_set_state_cond(port, DR_SWAP_CHANGE_DR, 0);
 		break;
 	case DR_SWAP_SEND_TIMEOUT:
 		tcpm_swap_complete(port, -ETIMEDOUT);
 		port->send_discover = false;
+		port->send_discover_prime = false;
 		tcpm_ams_finish(port);
 		tcpm_set_state(port, ready_state(port), 0);
 		break;
@@ -4667,7 +5385,7 @@ static void run_state_machine(struct tcpm_port *port)
 		break;
 
 	case FR_SWAP_SEND:
-		if (tcpm_pd_send_control(port, PD_CTRL_FR_SWAP)) {
+		if (tcpm_pd_send_control(port, PD_CTRL_FR_SWAP, TCPC_TX_SOP)) {
 			tcpm_set_state(port, ERROR_RECOVERY, 0);
 			break;
 		}
@@ -4687,7 +5405,7 @@ static void run_state_machine(struct tcpm_port *port)
 		break;
 	case FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED:
 		tcpm_set_pwr_role(port, TYPEC_SOURCE);
-		if (tcpm_pd_send_control(port, PD_CTRL_PS_RDY)) {
+		if (tcpm_pd_send_control(port, PD_CTRL_PS_RDY, TCPC_TX_SOP)) {
 			tcpm_set_state(port, ERROR_RECOVERY, 0);
 			break;
 		}
@@ -4697,11 +5415,11 @@ static void run_state_machine(struct tcpm_port *port)
 
 	/* PR_Swap states */
 	case PR_SWAP_ACCEPT:
-		tcpm_pd_send_control(port, PD_CTRL_ACCEPT);
+		tcpm_pd_send_control(port, PD_CTRL_ACCEPT, TCPC_TX_SOP);
 		tcpm_set_state(port, PR_SWAP_START, 0);
 		break;
 	case PR_SWAP_SEND:
-		tcpm_pd_send_control(port, PD_CTRL_PR_SWAP);
+		tcpm_pd_send_control(port, PD_CTRL_PR_SWAP, TCPC_TX_SOP);
 		tcpm_set_state_cond(port, PR_SWAP_SEND_TIMEOUT,
 				    PD_T_SENDER_RESPONSE);
 		break;
@@ -4743,7 +5461,7 @@ static void run_state_machine(struct tcpm_port *port)
 		 * supply is turned off"
 		 */
 		tcpm_set_pwr_role(port, TYPEC_SINK);
-		if (tcpm_pd_send_control(port, PD_CTRL_PS_RDY)) {
+		if (tcpm_pd_send_control(port, PD_CTRL_PS_RDY, TCPC_TX_SOP)) {
 			tcpm_set_state(port, ERROR_RECOVERY, 0);
 			break;
 		}
@@ -4790,17 +5508,17 @@ static void run_state_machine(struct tcpm_port *port)
 		 * Source."
 		 */
 		tcpm_set_pwr_role(port, TYPEC_SOURCE);
-		tcpm_pd_send_control(port, PD_CTRL_PS_RDY);
+		tcpm_pd_send_control(port, PD_CTRL_PS_RDY, TCPC_TX_SOP);
 		tcpm_set_state(port, SRC_STARTUP, PD_T_SWAP_SRC_START);
 		break;
 
 	case VCONN_SWAP_ACCEPT:
-		tcpm_pd_send_control(port, PD_CTRL_ACCEPT);
+		tcpm_pd_send_control(port, PD_CTRL_ACCEPT, TCPC_TX_SOP);
 		tcpm_ams_finish(port);
 		tcpm_set_state(port, VCONN_SWAP_START, 0);
 		break;
 	case VCONN_SWAP_SEND:
-		tcpm_pd_send_control(port, PD_CTRL_VCONN_SWAP);
+		tcpm_pd_send_control(port, PD_CTRL_VCONN_SWAP, TCPC_TX_SOP);
 		tcpm_set_state(port, VCONN_SWAP_SEND_TIMEOUT,
 			       PD_T_SENDER_RESPONSE);
 		break;
@@ -4819,14 +5537,34 @@ static void run_state_machine(struct tcpm_port *port)
 			       PD_T_VCONN_SOURCE_ON);
 		break;
 	case VCONN_SWAP_TURN_ON_VCONN:
-		tcpm_set_vconn(port, true);
-		tcpm_pd_send_control(port, PD_CTRL_PS_RDY);
-		tcpm_set_state(port, ready_state(port), 0);
+		ret = tcpm_set_vconn(port, true);
+		tcpm_pd_send_control(port, PD_CTRL_PS_RDY, TCPC_TX_SOP);
+		/*
+		 * USB PD 3.0 Section 6.4.4.3.1
+		 *
+		 * Note that a Cable Plug or VPD will not be ready for PD
+		 * Communication until tVCONNStable after VCONN has been applied
+		 */
+		if (!ret)
+			tcpm_set_state(port, VCONN_SWAP_SEND_SOFT_RESET,
+				       PD_T_VCONN_STABLE);
+		else
+			tcpm_set_state(port, ready_state(port), 0);
 		break;
 	case VCONN_SWAP_TURN_OFF_VCONN:
 		tcpm_set_vconn(port, false);
 		tcpm_set_state(port, ready_state(port), 0);
 		break;
+	case VCONN_SWAP_SEND_SOFT_RESET:
+		tcpm_swap_complete(port, port->swap_status);
+		if (tcpm_can_communicate_sop_prime(port)) {
+			port->tx_sop_type = TCPC_TX_SOP_PRIME;
+			port->upcoming_state = SOFT_RESET_SEND;
+			tcpm_ams_start(port, SOFT_RESET_AMS);
+		} else {
+			tcpm_set_state(port, ready_state(port), 0);
+		}
+		break;
 
 	case DR_SWAP_CANCEL:
 	case PR_SWAP_CANCEL:
@@ -4862,7 +5600,7 @@ static void run_state_machine(struct tcpm_port *port)
 		}
 		break;
 	case GET_STATUS_SEND:
-		tcpm_pd_send_control(port, PD_CTRL_GET_STATUS);
+		tcpm_pd_send_control(port, PD_CTRL_GET_STATUS, TCPC_TX_SOP);
 		tcpm_set_state(port, GET_STATUS_SEND_TIMEOUT,
 			       PD_T_SENDER_RESPONSE);
 		break;
@@ -4870,7 +5608,7 @@ static void run_state_machine(struct tcpm_port *port)
 		tcpm_set_state(port, ready_state(port), 0);
 		break;
 	case GET_PPS_STATUS_SEND:
-		tcpm_pd_send_control(port, PD_CTRL_GET_PPS_STATUS);
+		tcpm_pd_send_control(port, PD_CTRL_GET_PPS_STATUS, TCPC_TX_SOP);
 		tcpm_set_state(port, GET_PPS_STATUS_SEND_TIMEOUT,
 			       PD_T_SENDER_RESPONSE);
 		break;
@@ -4878,7 +5616,7 @@ static void run_state_machine(struct tcpm_port *port)
 		tcpm_set_state(port, ready_state(port), 0);
 		break;
 	case GET_SINK_CAP:
-		tcpm_pd_send_control(port, PD_CTRL_GET_SINK_CAP);
+		tcpm_pd_send_control(port, PD_CTRL_GET_SINK_CAP, TCPC_TX_SOP);
 		tcpm_set_state(port, GET_SINK_CAP_TIMEOUT, PD_T_SENDER_RESPONSE);
 		break;
 	case GET_SINK_CAP_TIMEOUT:
@@ -4922,9 +5660,18 @@ static void run_state_machine(struct tcpm_port *port)
 
 	/* Chunk state */
 	case CHUNK_NOT_SUPP:
-		tcpm_pd_send_control(port, PD_CTRL_NOT_SUPP);
+		tcpm_pd_send_control(port, PD_CTRL_NOT_SUPP, TCPC_TX_SOP);
 		tcpm_set_state(port, port->pwr_role == TYPEC_SOURCE ? SRC_READY : SNK_READY, 0);
 		break;
+
+	/* Cable states */
+	case SRC_VDM_IDENTITY_REQUEST:
+		port->send_discover_prime = true;
+		port->tx_sop_type = TCPC_TX_SOP_PRIME;
+		mod_send_discover_delayed_work(port, 0);
+		port->upcoming_state = SRC_SEND_CAPABILITIES;
+		break;
+
 	default:
 		WARN(1, "Unexpected port state %d\n", port->state);
 		break;
@@ -5427,6 +6174,7 @@ static void _tcpm_pd_hard_reset(struct tcpm_port *port)
 		port->tcpc->set_bist_data(port->tcpc, false);
 
 	switch (port->state) {
+	case TOGGLING:
 	case ERROR_RECOVERY:
 	case PORT_RESET:
 	case PORT_RESET_WAIT_OFF:
@@ -5616,7 +6364,8 @@ static void tcpm_enable_frs_work(struct kthread_work *work)
 		goto unlock;
 
 	/* Send when the state machine is idle */
-	if (port->state != SNK_READY || port->vdm_sm_running || port->send_discover)
+	if (port->state != SNK_READY || port->vdm_sm_running || port->send_discover ||
+	    port->send_discover_prime)
 		goto resched;
 
 	port->upcoming_state = GET_SINK_CAP;
@@ -5639,21 +6388,23 @@ static void tcpm_send_discover_work(struct kthread_work *work)
 
 	mutex_lock(&port->lock);
 	/* No need to send DISCOVER_IDENTITY anymore */
-	if (!port->send_discover)
+	if (!port->send_discover && !port->send_discover_prime)
 		goto unlock;
 
 	if (port->data_role == TYPEC_DEVICE && port->negotiated_rev < PD_REV30) {
 		port->send_discover = false;
+		port->send_discover_prime = false;
 		goto unlock;
 	}
 
 	/* Retry if the port is not idle */
-	if ((port->state != SRC_READY && port->state != SNK_READY) || port->vdm_sm_running) {
+	if ((port->state != SRC_READY && port->state != SNK_READY &&
+	     port->state != SRC_VDM_IDENTITY_REQUEST) || port->vdm_sm_running) {
 		mod_send_discover_delayed_work(port, SEND_DISCOVER_RETRY_MS);
 		goto unlock;
 	}
 
-	tcpm_send_vdm(port, USB_SID_PD, CMD_DISCOVER_IDENT, NULL, 0);
+	tcpm_send_vdm(port, USB_SID_PD, CMD_DISCOVER_IDENT, NULL, 0, port->tx_sop_type);
 
 unlock:
 	mutex_unlock(&port->lock);
@@ -6880,6 +7631,8 @@ struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc)
 	typec_port_register_altmodes(port->typec_port,
 				     &tcpm_altmode_ops, port,
 				     port->port_altmode, ALTMODE_DISCOVERY_MAX);
+	typec_port_register_cable_ops(port->port_altmode, ARRAY_SIZE(port->port_altmode),
+				      &tcpm_cable_ops);
 	port->registered = true;
 
 	mutex_lock(&port->lock);
diff --git a/drivers/usb/typec/tcpm/wcove.c b/drivers/usb/typec/tcpm/wcove.c
index 87d4abde0e..cf719307b3 100644
--- a/drivers/usb/typec/tcpm/wcove.c
+++ b/drivers/usb/typec/tcpm/wcove.c
@@ -535,7 +535,7 @@ static irqreturn_t wcove_typec_irq(int irq, void *data)
 				goto err;
 			}
 
-			tcpm_pd_receive(wcove->tcpm, &msg);
+			tcpm_pd_receive(wcove->tcpm, &msg, TCPC_TX_SOP);
 
 			ret = regmap_read(wcove->regmap, USBC_RXSTATUS,
 					  &status);
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index b501760012..7801501837 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -403,6 +403,27 @@ static int ucsi_register_altmode(struct ucsi_connector *con,
 
 		con->partner_altmode[i] = alt;
 		break;
+	case UCSI_RECIPIENT_SOP_P:
+		i = ucsi_next_altmode(con->plug_altmode);
+		if (i < 0) {
+			ret = i;
+			goto err;
+		}
+
+		ret = ucsi_altmode_next_mode(con->plug_altmode, desc->svid);
+		if (ret < 0)
+			return ret;
+
+		desc->mode = ret;
+
+		alt = typec_plug_register_altmode(con->plug, desc);
+		if (IS_ERR(alt)) {
+			ret = PTR_ERR(alt);
+			goto err;
+		}
+
+		con->plug_altmode[i] = alt;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -570,6 +591,9 @@ static void ucsi_unregister_altmodes(struct ucsi_connector *con, u8 recipient)
 	case UCSI_RECIPIENT_SOP:
 		adev = con->partner_altmode;
 		break;
+	case UCSI_RECIPIENT_SOP_P:
+		adev = con->plug_altmode;
+		break;
 	default:
 		return;
 	}
@@ -595,7 +619,8 @@ static int ucsi_read_pdos(struct ucsi_connector *con,
 	u64 command;
 	int ret;
 
-	if (ucsi->quirks & UCSI_NO_PARTNER_PDOS)
+	if (is_partner &&
+	    ucsi->quirks & UCSI_NO_PARTNER_PDOS)
 		return 0;
 
 	command = UCSI_COMMAND(UCSI_GET_PDOS) | UCSI_CONNECTOR_NUMBER(con->num);
@@ -650,6 +675,108 @@ static int ucsi_get_src_pdos(struct ucsi_connector *con)
 	return ret;
 }
 
+static int ucsi_read_identity(struct ucsi_connector *con, u8 recipient,
+			      u8 offset, u8 bytes, void *resp)
+{
+	struct ucsi *ucsi = con->ucsi;
+	u64 command;
+	int ret;
+
+	command = UCSI_COMMAND(UCSI_GET_PD_MESSAGE) |
+	    UCSI_CONNECTOR_NUMBER(con->num);
+	command |= UCSI_GET_PD_MESSAGE_RECIPIENT(recipient);
+	command |= UCSI_GET_PD_MESSAGE_OFFSET(offset);
+	command |= UCSI_GET_PD_MESSAGE_BYTES(bytes);
+	command |= UCSI_GET_PD_MESSAGE_TYPE(UCSI_GET_PD_MESSAGE_TYPE_IDENTITY);
+
+	ret = ucsi_send_command(ucsi, command, resp, bytes);
+	if (ret < 0)
+		dev_err(ucsi->dev, "UCSI_GET_PD_MESSAGE failed (%d)\n", ret);
+
+	return ret;
+}
+
+static int ucsi_get_identity(struct ucsi_connector *con, u8 recipient,
+			      struct usb_pd_identity *id)
+{
+	struct ucsi *ucsi = con->ucsi;
+	struct ucsi_pd_message_disc_id resp = {};
+	int ret;
+
+	if (ucsi->version < UCSI_VERSION_2_0) {
+		/*
+		 * Before UCSI v2.0, MESSAGE_IN is 16 bytes which cannot fit
+		 * the 28 byte identity response including the VDM header.
+		 * First request the VDM header, ID Header VDO, Cert Stat VDO
+		 * and Product VDO.
+		 */
+		ret = ucsi_read_identity(con, recipient, 0, 0x10, &resp);
+		if (ret < 0)
+			return ret;
+
+
+		/* Then request Product Type VDO1 through Product Type VDO3. */
+		ret = ucsi_read_identity(con, recipient, 0x10, 0xc,
+					 &resp.vdo[0]);
+		if (ret < 0)
+			return ret;
+
+	} else {
+		/*
+		 * In UCSI v2.0 and after, MESSAGE_IN is large enough to request
+		 * the large enough to request the full Discover Identity
+		 * response at once.
+		 */
+		ret = ucsi_read_identity(con, recipient, 0x0, 0x1c, &resp);
+		if (ret < 0)
+			return ret;
+	}
+
+	id->id_header = resp.id_header;
+	id->cert_stat = resp.cert_stat;
+	id->product = resp.product;
+	id->vdo[0] = resp.vdo[0];
+	id->vdo[1] = resp.vdo[1];
+	id->vdo[2] = resp.vdo[2];
+	return 0;
+}
+
+static int ucsi_get_partner_identity(struct ucsi_connector *con)
+{
+	int ret;
+
+	ret = ucsi_get_identity(con, UCSI_RECIPIENT_SOP,
+				 &con->partner_identity);
+	if (ret < 0)
+		return ret;
+
+	ret = typec_partner_set_identity(con->partner);
+	if (ret < 0) {
+		dev_err(con->ucsi->dev, "Failed to set partner identity (%d)\n",
+			ret);
+	}
+
+	return ret;
+}
+
+static int ucsi_get_cable_identity(struct ucsi_connector *con)
+{
+	int ret;
+
+	ret = ucsi_get_identity(con, UCSI_RECIPIENT_SOP_P,
+				 &con->cable_identity);
+	if (ret < 0)
+		return ret;
+
+	ret = typec_cable_set_identity(con->cable);
+	if (ret < 0) {
+		dev_err(con->ucsi->dev, "Failed to set cable identity (%d)\n",
+			ret);
+	}
+
+	return ret;
+}
+
 static int ucsi_check_altmodes(struct ucsi_connector *con)
 {
 	int ret, num_partner_am;
@@ -697,12 +824,6 @@ static int ucsi_register_partner_pdos(struct ucsi_connector *con)
 			return PTR_ERR(cap);
 
 		con->partner_source_caps = cap;
-
-		ret = typec_partner_set_usb_power_delivery(con->partner, con->partner_pd);
-		if (ret) {
-			usb_power_delivery_unregister_capabilities(con->partner_source_caps);
-			return ret;
-		}
 	}
 
 	ret = ucsi_get_pdos(con, TYPEC_SINK, 1, caps.pdo);
@@ -717,15 +838,9 @@ static int ucsi_register_partner_pdos(struct ucsi_connector *con)
 			return PTR_ERR(cap);
 
 		con->partner_sink_caps = cap;
-
-		ret = typec_partner_set_usb_power_delivery(con->partner, con->partner_pd);
-		if (ret) {
-			usb_power_delivery_unregister_capabilities(con->partner_sink_caps);
-			return ret;
-		}
 	}
 
-	return 0;
+	return typec_partner_set_usb_power_delivery(con->partner, con->partner_pd);
 }
 
 static void ucsi_unregister_partner_pdos(struct ucsi_connector *con)
@@ -738,6 +853,82 @@ static void ucsi_unregister_partner_pdos(struct ucsi_connector *con)
 	con->partner_pd = NULL;
 }
 
+static int ucsi_register_plug(struct ucsi_connector *con)
+{
+	struct typec_plug *plug;
+	struct typec_plug_desc desc = {.index = TYPEC_PLUG_SOP_P};
+
+	plug = typec_register_plug(con->cable, &desc);
+	if (IS_ERR(plug)) {
+		dev_err(con->ucsi->dev,
+			"con%d: failed to register plug (%ld)\n", con->num,
+			PTR_ERR(plug));
+		return PTR_ERR(plug);
+	}
+
+	con->plug = plug;
+	return 0;
+}
+
+static void ucsi_unregister_plug(struct ucsi_connector *con)
+{
+	if (!con->plug)
+		return;
+
+	ucsi_unregister_altmodes(con, UCSI_RECIPIENT_SOP_P);
+	typec_unregister_plug(con->plug);
+	con->plug = NULL;
+}
+
+static int ucsi_register_cable(struct ucsi_connector *con)
+{
+	struct typec_cable *cable;
+	struct typec_cable_desc desc = {};
+
+	switch (UCSI_CABLE_PROP_FLAG_PLUG_TYPE(con->cable_prop.flags)) {
+	case UCSI_CABLE_PROPERTY_PLUG_TYPE_A:
+		desc.type = USB_PLUG_TYPE_A;
+		break;
+	case UCSI_CABLE_PROPERTY_PLUG_TYPE_B:
+		desc.type = USB_PLUG_TYPE_B;
+		break;
+	case UCSI_CABLE_PROPERTY_PLUG_TYPE_C:
+		desc.type = USB_PLUG_TYPE_C;
+		break;
+	default:
+		desc.type = USB_PLUG_NONE;
+		break;
+	}
+
+	desc.identity = &con->cable_identity;
+	desc.active = !!(UCSI_CABLE_PROP_FLAG_ACTIVE_CABLE &
+			 con->cable_prop.flags);
+	desc.pd_revision = UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV_AS_BCD(
+	    con->cable_prop.flags);
+
+	cable = typec_register_cable(con->port, &desc);
+	if (IS_ERR(cable)) {
+		dev_err(con->ucsi->dev,
+			"con%d: failed to register cable (%ld)\n", con->num,
+			PTR_ERR(cable));
+		return PTR_ERR(cable);
+	}
+
+	con->cable = cable;
+	return 0;
+}
+
+static void ucsi_unregister_cable(struct ucsi_connector *con)
+{
+	if (!con->cable)
+		return;
+
+	ucsi_unregister_plug(con);
+	typec_unregister_cable(con->cable);
+	memset(&con->cable_identity, 0, sizeof(con->cable_identity));
+	con->cable = NULL;
+}
+
 static void ucsi_pwr_opmode_change(struct ucsi_connector *con)
 {
 	switch (UCSI_CONSTAT_PWR_OPMODE(con->status.flags)) {
@@ -785,7 +976,9 @@ static int ucsi_register_partner(struct ucsi_connector *con)
 		break;
 	}
 
+	desc.identity = &con->partner_identity;
 	desc.usb_pd = pwr_opmode == UCSI_CONSTAT_PWR_OPMODE_PD;
+	desc.pd_revision = UCSI_CONCAP_FLAG_PARTNER_PD_MAJOR_REV_AS_BCD(con->cap.flags);
 
 	partner = typec_register_partner(con->port, &desc);
 	if (IS_ERR(partner)) {
@@ -810,7 +1003,9 @@ static void ucsi_unregister_partner(struct ucsi_connector *con)
 	typec_partner_set_usb_power_delivery(con->partner, NULL);
 	ucsi_unregister_partner_pdos(con);
 	ucsi_unregister_altmodes(con, UCSI_RECIPIENT_SOP);
+	ucsi_unregister_cable(con);
 	typec_unregister_partner(con->partner);
+	memset(&con->partner_identity, 0, sizeof(con->partner_identity));
 	con->partner = NULL;
 }
 
@@ -860,6 +1055,27 @@ static void ucsi_partner_change(struct ucsi_connector *con)
 			con->num, u_role);
 }
 
+static int ucsi_check_connector_capability(struct ucsi_connector *con)
+{
+	u64 command;
+	int ret;
+
+	if (!con->partner || con->ucsi->version < UCSI_VERSION_2_0)
+		return 0;
+
+	command = UCSI_GET_CONNECTOR_CAPABILITY | UCSI_CONNECTOR_NUMBER(con->num);
+	ret = ucsi_send_command(con->ucsi, command, &con->cap, sizeof(con->cap));
+	if (ret < 0) {
+		dev_err(con->ucsi->dev, "GET_CONNECTOR_CAPABILITY failed (%d)\n", ret);
+		return ret;
+	}
+
+	typec_partner_set_pd_revision(con->partner,
+		UCSI_CONCAP_FLAG_PARTNER_PD_MAJOR_REV_AS_BCD(con->cap.flags));
+
+	return ret;
+}
+
 static int ucsi_check_connection(struct ucsi_connector *con)
 {
 	u8 prev_flags = con->status.flags;
@@ -889,6 +1105,46 @@ static int ucsi_check_connection(struct ucsi_connector *con)
 	return 0;
 }
 
+static int ucsi_check_cable(struct ucsi_connector *con)
+{
+	u64 command;
+	int ret;
+
+	if (con->cable)
+		return 0;
+
+	command = UCSI_GET_CABLE_PROPERTY | UCSI_CONNECTOR_NUMBER(con->num);
+	ret = ucsi_send_command(con->ucsi, command, &con->cable_prop,
+				sizeof(con->cable_prop));
+	if (ret < 0) {
+		dev_err(con->ucsi->dev, "GET_CABLE_PROPERTY failed (%d)\n",
+			ret);
+		return ret;
+	}
+
+	ret = ucsi_register_cable(con);
+	if (ret < 0)
+		return ret;
+
+	if (con->ucsi->cap.features & UCSI_CAP_GET_PD_MESSAGE) {
+		ret = ucsi_get_cable_identity(con);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (con->ucsi->cap.features & UCSI_CAP_ALT_MODE_DETAILS) {
+		ret = ucsi_register_plug(con);
+		if (ret < 0)
+			return ret;
+
+		ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP_P);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
 static void ucsi_handle_connector_change(struct work_struct *work)
 {
 	struct ucsi_connector *con = container_of(work, struct ucsi_connector,
@@ -929,6 +1185,11 @@ static void ucsi_handle_connector_change(struct work_struct *work)
 		if (con->status.flags & UCSI_CONSTAT_CONNECTED) {
 			ucsi_register_partner(con);
 			ucsi_partner_task(con, ucsi_check_connection, 1, HZ);
+			ucsi_partner_task(con, ucsi_check_connector_capability, 1, HZ);
+			if (con->ucsi->cap.features & UCSI_CAP_GET_PD_MESSAGE)
+				ucsi_partner_task(con, ucsi_get_partner_identity, 1, HZ);
+			if (con->ucsi->cap.features & UCSI_CAP_CABLE_DETAILS)
+				ucsi_partner_task(con, ucsi_check_cable, 1, HZ);
 
 			if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) ==
 			    UCSI_CONSTAT_PWR_OPMODE_PD)
@@ -1300,7 +1561,6 @@ static int ucsi_register_port(struct ucsi *ucsi, struct ucsi_connector *con)
 		}
 
 		con->port_source_caps = pd_cap;
-		typec_port_set_usb_power_delivery(con->port, con->pd);
 	}
 
 	memset(&pd_caps, 0, sizeof(pd_caps));
@@ -1317,9 +1577,10 @@ static int ucsi_register_port(struct ucsi *ucsi, struct ucsi_connector *con)
 		}
 
 		con->port_sink_caps = pd_cap;
-		typec_port_set_usb_power_delivery(con->port, con->pd);
 	}
 
+	typec_port_set_usb_power_delivery(con->port, con->pd);
+
 	/* Alternate modes */
 	ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_CON);
 	if (ret) {
@@ -1361,6 +1622,10 @@ static int ucsi_register_port(struct ucsi *ucsi, struct ucsi_connector *con)
 		ucsi_register_partner(con);
 		ucsi_pwr_opmode_change(con);
 		ucsi_port_psy_changed(con);
+		if (con->ucsi->cap.features & UCSI_CAP_GET_PD_MESSAGE)
+			ucsi_get_partner_identity(con);
+		if (con->ucsi->cap.features & UCSI_CAP_CABLE_DETAILS)
+			ucsi_check_cable(con);
 	}
 
 	/* Only notify USB controller if partner supports USB data */
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index ede9876488..0e7c92eb1b 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -10,6 +10,7 @@
 #include <linux/usb/typec.h>
 #include <linux/usb/pd.h>
 #include <linux/usb/role.h>
+#include <asm/unaligned.h>
 
 /* -------------------------------------------------------------------------- */
 
@@ -35,6 +36,12 @@ struct dentry;
 #define UCSI_BCD_GET_MINOR(_v_)		(((_v_) >> 4) & 0x0F)
 #define UCSI_BCD_GET_SUBMINOR(_v_)	((_v_) & 0x0F)
 
+/*
+ * Per USB PD 3.2, Section 6.2.1.1.5, the spec revision is represented by 2 bits
+ * 0b00 = 1.0, 0b01 = 2.0, 0b10 = 3.0, 0b11 = Reserved, Shall NOT be used.
+ */
+#define UCSI_SPEC_REVISION_TO_BCD(_v_)  (((_v_) + 1) << 8)
+
 /* Command Status and Connector Change Indication (CCI) bits */
 #define UCSI_CCI_CONNECTOR(_c_)		(((_c_) & GENMASK(7, 1)) >> 1)
 #define UCSI_CCI_LENGTH(_c_)		(((_c_) & GENMASK(15, 8)) >> 8)
@@ -99,6 +106,7 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num);
 #define UCSI_GET_CABLE_PROPERTY		0x11
 #define UCSI_GET_CONNECTOR_STATUS	0x12
 #define UCSI_GET_ERROR_STATUS		0x13
+#define UCSI_GET_PD_MESSAGE		0x15
 
 #define UCSI_CONNECTOR_NUMBER(_num_)		((u64)(_num_) << 16)
 #define UCSI_COMMAND(_cmd_)			((_cmd_) & 0xff)
@@ -152,6 +160,18 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num);
 #define UCSI_MAX_PDOS				(4)
 #define UCSI_GET_PDOS_SRC_PDOS			((u64)1 << 34)
 
+/* GET_PD_MESSAGE command bits */
+#define UCSI_GET_PD_MESSAGE_RECIPIENT(_r_)	((u64)(_r_) << 23)
+#define UCSI_GET_PD_MESSAGE_OFFSET(_r_)		((u64)(_r_) << 26)
+#define UCSI_GET_PD_MESSAGE_BYTES(_r_)		((u64)(_r_) << 34)
+#define UCSI_GET_PD_MESSAGE_TYPE(_r_)		((u64)(_r_) << 42)
+#define   UCSI_GET_PD_MESSAGE_TYPE_SNK_CAP_EXT	0
+#define   UCSI_GET_PD_MESSAGE_TYPE_SRC_CAP_EXT	1
+#define   UCSI_GET_PD_MESSAGE_TYPE_BAT_CAP	2
+#define   UCSI_GET_PD_MESSAGE_TYPE_BAT_STAT	3
+#define   UCSI_GET_PD_MESSAGE_TYPE_IDENTITY	4
+#define   UCSI_GET_PD_MESSAGE_TYPE_REVISION	5
+
 /* -------------------------------------------------------------------------- */
 
 /* Error information returned by PPM in response to GET_ERROR_STATUS command. */
@@ -186,7 +206,7 @@ struct ucsi_capability {
 #define UCSI_CAP_ATTR_POWER_OTHER		BIT(10)
 #define UCSI_CAP_ATTR_POWER_VBUS		BIT(14)
 	u8 num_connectors;
-	u8 features;
+	u16 features;
 #define UCSI_CAP_SET_UOM			BIT(0)
 #define UCSI_CAP_SET_PDM			BIT(1)
 #define UCSI_CAP_ALT_MODE_DETAILS		BIT(2)
@@ -195,7 +215,8 @@ struct ucsi_capability {
 #define UCSI_CAP_CABLE_DETAILS			BIT(5)
 #define UCSI_CAP_EXT_SUPPLY_NOTIFICATIONS	BIT(6)
 #define UCSI_CAP_PD_RESET			BIT(7)
-	u16 reserved_1;
+#define UCSI_CAP_GET_PD_MESSAGE		BIT(8)
+	u8 reserved_1;
 	u8 num_alt_modes;
 	u8 reserved_2;
 	u16 bc_version;
@@ -214,9 +235,29 @@ struct ucsi_connector_capability {
 #define UCSI_CONCAP_OPMODE_USB2			BIT(5)
 #define UCSI_CONCAP_OPMODE_USB3			BIT(6)
 #define UCSI_CONCAP_OPMODE_ALT_MODE		BIT(7)
-	u8 flags;
+	u32 flags;
 #define UCSI_CONCAP_FLAG_PROVIDER		BIT(0)
 #define UCSI_CONCAP_FLAG_CONSUMER		BIT(1)
+#define UCSI_CONCAP_FLAG_SWAP_TO_DFP		BIT(2)
+#define UCSI_CONCAP_FLAG_SWAP_TO_UFP		BIT(3)
+#define UCSI_CONCAP_FLAG_SWAP_TO_SRC		BIT(4)
+#define UCSI_CONCAP_FLAG_SWAP_TO_SINK		BIT(5)
+#define UCSI_CONCAP_FLAG_EX_OP_MODE(_f_) \
+	(((_f_) & GENMASK(13, 6)) >> 6)
+#define   UCSI_CONCAP_EX_OP_MODE_USB4_GEN2	BIT(0)
+#define   UCSI_CONCAP_EX_OP_MODE_EPR_SRC	BIT(1)
+#define   UCSI_CONCAP_EX_OP_MODE_EPR_SINK	BIT(2)
+#define   UCSI_CONCAP_EX_OP_MODE_USB4_GEN3	BIT(3)
+#define   UCSI_CONCAP_EX_OP_MODE_USB4_GEN4	BIT(4)
+#define UCSI_CONCAP_FLAG_MISC_CAPS(_f_) \
+	(((_f_) & GENMASK(17, 14)) >> 14)
+#define   UCSI_CONCAP_MISC_CAP_FW_UPDATE	BIT(0)
+#define   UCSI_CONCAP_MISC_CAP_SECURITY		BIT(1)
+#define UCSI_CONCAP_FLAG_REV_CURR_PROT_SUPPORT	BIT(18)
+#define UCSI_CONCAP_FLAG_PARTNER_PD_MAJOR_REV(_f_) \
+	(((_f_) & GENMASK(20, 19)) >> 19)
+#define UCSI_CONCAP_FLAG_PARTNER_PD_MAJOR_REV_AS_BCD(_f_) \
+	UCSI_SPEC_REVISION_TO_BCD(UCSI_CONCAP_FLAG_PARTNER_PD_MAJOR_REV(_f_))
 } __packed;
 
 struct ucsi_altmode {
@@ -238,6 +279,9 @@ struct ucsi_cable_property {
 #define   UCSI_CABLE_PROPERTY_PLUG_TYPE_C	2
 #define   UCSI_CABLE_PROPERTY_PLUG_OTHER	3
 #define UCSI_CABLE_PROP_FLAG_MODE_SUPPORT	BIT(5)
+#define UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV(_f_)	(((_f_) & GENMASK(7, 6)) >> 6)
+#define UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV_AS_BCD(_f_) \
+	UCSI_SPEC_REVISION_TO_BCD(UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV(_f_))
 	u8 latency;
 } __packed;
 
@@ -276,15 +320,48 @@ struct ucsi_connector_status {
 #define   UCSI_CONSTAT_PARTNER_TYPE_DEBUG	5
 #define   UCSI_CONSTAT_PARTNER_TYPE_AUDIO	6
 	u32 request_data_obj;
-	u8 pwr_status;
-#define UCSI_CONSTAT_BC_STATUS(_p_)		((_p_) & GENMASK(2, 0))
+
+	u8 pwr_status[3];
+#define UCSI_CONSTAT_BC_STATUS(_p_)		((_p_[0]) & GENMASK(1, 0))
 #define   UCSI_CONSTAT_BC_NOT_CHARGING		0
 #define   UCSI_CONSTAT_BC_NOMINAL_CHARGING	1
 #define   UCSI_CONSTAT_BC_SLOW_CHARGING		2
 #define   UCSI_CONSTAT_BC_TRICKLE_CHARGING	3
-#define UCSI_CONSTAT_PROVIDER_CAP_LIMIT(_p_)	(((_p_) & GENMASK(6, 3)) >> 3)
+#define UCSI_CONSTAT_PROVIDER_CAP_LIMIT(_p_)	(((_p_[0]) & GENMASK(5, 2)) >> 2)
 #define   UCSI_CONSTAT_CAP_PWR_LOWERED		0
 #define   UCSI_CONSTAT_CAP_PWR_BUDGET_LIMIT	1
+#define UCSI_CONSTAT_PROVIDER_PD_VERSION_OPER_MODE(_p_)	\
+	((get_unaligned_le32(_p_) & GENMASK(21, 6)) >> 6)
+#define UCSI_CONSTAT_ORIENTATION(_p_)		(((_p_[2]) & GENMASK(6, 6)) >> 6)
+#define   UCSI_CONSTAT_ORIENTATION_DIRECT	0
+#define   UCSI_CONSTAT_ORIENTATION_FLIPPED	1
+#define UCSI_CONSTAT_SINK_PATH_STATUS(_p_)	(((_p_[2]) & GENMASK(7, 7)) >> 7)
+#define   UCSI_CONSTAT_SINK_PATH_DISABLED	0
+#define   UCSI_CONSTAT_SINK_PATH_ENABLED	1
+	u8 pwr_readings[9];
+#define UCSI_CONSTAT_REV_CURR_PROT_STATUS(_p_)	((_p_[0]) & 0x1)
+#define UCSI_CONSTAT_PWR_READING_VALID(_p_)	(((_p_[0]) & GENMASK(1, 1)) >> 1)
+#define UCSI_CONSTAT_CURRENT_SCALE(_p_)		(((_p_[0]) & GENMASK(4, 2)) >> 2)
+#define UCSI_CONSTAT_PEAK_CURRENT(_p_) \
+	((get_unaligned_le32(_p_) & GENMASK(20, 5)) >> 5)
+#define UCSI_CONSTAT_AVG_CURRENT(_p_) \
+	((get_unaligned_le32(&(_p_)[2]) & GENMASK(20, 5)) >> 5)
+#define UCSI_CONSTAT_VOLTAGE_SCALE(_p_) \
+	((get_unaligned_le16(&(_p_)[4]) & GENMASK(8, 5)) >> 5)
+#define UCSI_CONSTAT_VOLTAGE_READING(_p_) \
+	((get_unaligned_le32(&(_p_)[5]) & GENMASK(16, 1)) >> 1)
+} __packed;
+
+/*
+ * Data structure filled by PPM in response to GET_PD_MESSAGE command with the
+ * Response Message Type set to Discover Identity Response.
+ */
+struct ucsi_pd_message_disc_id {
+	u32 vdm_header;
+	u32 id_header;
+	u32 cert_stat;
+	u32 product;
+	u32 vdo[3];
 } __packed;
 
 /* -------------------------------------------------------------------------- */
@@ -352,14 +429,18 @@ struct ucsi_connector {
 
 	struct typec_port *port;
 	struct typec_partner *partner;
+	struct typec_cable *cable;
+	struct typec_plug *plug;
 
 	struct typec_altmode *port_altmode[UCSI_MAX_ALTMODES];
 	struct typec_altmode *partner_altmode[UCSI_MAX_ALTMODES];
+	struct typec_altmode *plug_altmode[UCSI_MAX_ALTMODES];
 
 	struct typec_capability typec_cap;
 
 	struct ucsi_connector_status status;
 	struct ucsi_connector_capability cap;
+	struct ucsi_cable_property cable_prop;
 	struct power_supply *psy;
 	struct power_supply_desc psy_desc;
 	u32 rdo;
@@ -375,6 +456,10 @@ struct ucsi_connector {
 	struct usb_power_delivery_capabilities *partner_sink_caps;
 
 	struct usb_role_switch *usb_role_sw;
+
+	/* USB PD identity */
+	struct usb_pd_identity partner_identity;
+	struct usb_pd_identity cable_identity;
 };
 
 int ucsi_send_command(struct ucsi *ucsi, u64 command,
diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
index 449c125f6f..dda7c7c94e 100644
--- a/drivers/usb/typec/ucsi/ucsi_ccg.c
+++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
@@ -192,6 +192,12 @@ struct ucsi_ccg_altmode {
 	bool checked;
 } __packed;
 
+#define CCGX_MESSAGE_IN_MAX 4
+struct op_region {
+	__le32 cci;
+	__le32 message_in[CCGX_MESSAGE_IN_MAX];
+};
+
 struct ucsi_ccg {
 	struct device *dev;
 	struct ucsi *ucsi;
@@ -222,6 +228,13 @@ struct ucsi_ccg {
 	bool has_multiple_dp;
 	struct ucsi_ccg_altmode orig[UCSI_MAX_ALTMODES];
 	struct ucsi_ccg_altmode updated[UCSI_MAX_ALTMODES];
+
+	/*
+	 * This spinlock protects op_data which includes CCI and MESSAGE_IN that
+	 * will be updated in ISR
+	 */
+	spinlock_t op_lock;
+	struct op_region op_data;
 };
 
 static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len)
@@ -305,12 +318,42 @@ static int ccg_write(struct ucsi_ccg *uc, u16 rab, const u8 *data, u32 len)
 	return 0;
 }
 
+static int ccg_op_region_update(struct ucsi_ccg *uc, u32 cci)
+{
+	u16 reg = CCGX_RAB_UCSI_DATA_BLOCK(UCSI_MESSAGE_IN);
+	struct op_region *data = &uc->op_data;
+	unsigned char *buf;
+	size_t size = sizeof(data->message_in);
+
+	buf = kzalloc(size, GFP_ATOMIC);
+	if (!buf)
+		return -ENOMEM;
+	if (UCSI_CCI_LENGTH(cci)) {
+		int ret = ccg_read(uc, reg, (void *)buf, size);
+
+		if (ret) {
+			kfree(buf);
+			return ret;
+		}
+	}
+
+	spin_lock(&uc->op_lock);
+	data->cci = cpu_to_le32(cci);
+	if (UCSI_CCI_LENGTH(cci))
+		memcpy(&data->message_in, buf, size);
+	spin_unlock(&uc->op_lock);
+	kfree(buf);
+	return 0;
+}
+
 static int ucsi_ccg_init(struct ucsi_ccg *uc)
 {
 	unsigned int count = 10;
 	u8 data;
 	int status;
 
+	spin_lock_init(&uc->op_lock);
+
 	data = CCGX_RAB_UCSI_CONTROL_STOP;
 	status = ccg_write(uc, CCGX_RAB_UCSI_CONTROL, &data, sizeof(data));
 	if (status < 0)
@@ -520,9 +563,20 @@ static int ucsi_ccg_read(struct ucsi *ucsi, unsigned int offset,
 	u16 reg = CCGX_RAB_UCSI_DATA_BLOCK(offset);
 	struct ucsi_capability *cap;
 	struct ucsi_altmode *alt;
-	int ret;
+	int ret = 0;
+
+	if (offset == UCSI_CCI) {
+		spin_lock(&uc->op_lock);
+		memcpy(val, &(uc->op_data).cci, val_len);
+		spin_unlock(&uc->op_lock);
+	} else if (offset == UCSI_MESSAGE_IN) {
+		spin_lock(&uc->op_lock);
+		memcpy(val, &(uc->op_data).message_in, val_len);
+		spin_unlock(&uc->op_lock);
+	} else {
+		ret = ccg_read(uc, reg, val, val_len);
+	}
 
-	ret = ccg_read(uc, reg, val, val_len);
 	if (ret)
 		return ret;
 
@@ -559,9 +613,18 @@ static int ucsi_ccg_read(struct ucsi *ucsi, unsigned int offset,
 static int ucsi_ccg_async_write(struct ucsi *ucsi, unsigned int offset,
 				const void *val, size_t val_len)
 {
+	struct ucsi_ccg *uc = ucsi_get_drvdata(ucsi);
 	u16 reg = CCGX_RAB_UCSI_DATA_BLOCK(offset);
 
-	return ccg_write(ucsi_get_drvdata(ucsi), reg, val, val_len);
+	/*
+	 * UCSI may read CCI instantly after async_write,
+	 * clear CCI to avoid caller getting wrong data before we get CCI from ISR
+	 */
+	spin_lock(&uc->op_lock);
+	uc->op_data.cci = 0;
+	spin_unlock(&uc->op_lock);
+
+	return ccg_write(uc, reg, val, val_len);
 }
 
 static int ucsi_ccg_sync_write(struct ucsi *ucsi, unsigned int offset,
@@ -615,13 +678,18 @@ static irqreturn_t ccg_irq_handler(int irq, void *data)
 	u16 reg = CCGX_RAB_UCSI_DATA_BLOCK(UCSI_CCI);
 	struct ucsi_ccg *uc = data;
 	u8 intr_reg;
-	u32 cci;
-	int ret;
+	u32 cci = 0;
+	int ret = 0;
 
 	ret = ccg_read(uc, CCGX_RAB_INTR_REG, &intr_reg, sizeof(intr_reg));
 	if (ret)
 		return ret;
 
+	if (!intr_reg)
+		return IRQ_HANDLED;
+	else if (!(intr_reg & UCSI_READ_INT))
+		goto err_clear_irq;
+
 	ret = ccg_read(uc, reg, (void *)&cci, sizeof(cci));
 	if (ret)
 		goto err_clear_irq;
@@ -629,13 +697,21 @@ static irqreturn_t ccg_irq_handler(int irq, void *data)
 	if (UCSI_CCI_CONNECTOR(cci))
 		ucsi_connector_change(uc->ucsi, UCSI_CCI_CONNECTOR(cci));
 
-	if (test_bit(DEV_CMD_PENDING, &uc->flags) &&
-	    cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE))
-		complete(&uc->complete);
+	/*
+	 * As per CCGx UCSI interface guide, copy CCI and MESSAGE_IN
+	 * to the OpRegion before clear the UCSI interrupt
+	 */
+	ret = ccg_op_region_update(uc, cci);
+	if (ret)
+		goto err_clear_irq;
 
 err_clear_irq:
 	ccg_write(uc, CCGX_RAB_INTR_REG, &intr_reg, sizeof(intr_reg));
 
+	if (!ret && test_bit(DEV_CMD_PENDING, &uc->flags) &&
+	    cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE))
+		complete(&uc->complete);
+
 	return IRQ_HANDLED;
 }
 
diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c
index ce08eb33e5..1d0e2d87e9 100644
--- a/drivers/usb/typec/ucsi/ucsi_glink.c
+++ b/drivers/usb/typec/ucsi/ucsi_glink.c
@@ -176,7 +176,8 @@ static int pmic_glink_ucsi_sync_write(struct ucsi *__ucsi, unsigned int offset,
 	left = wait_for_completion_timeout(&ucsi->sync_ack, 5 * HZ);
 	if (!left) {
 		dev_err(ucsi->dev, "timeout waiting for UCSI sync write response\n");
-		ret = -ETIMEDOUT;
+		/* return 0 here and let core UCSI code handle the CCI_BUSY */
+		ret = 0;
 	} else if (ucsi->sync_val) {
 		dev_err(ucsi->dev, "sync write returned: %d\n", ucsi->sync_val);
 	}
@@ -243,10 +244,7 @@ static void pmic_glink_ucsi_notify(struct work_struct *work)
 		ucsi_connector_change(ucsi->ucsi, con_num);
 	}
 
-	if (ucsi->sync_pending && cci & UCSI_CCI_BUSY) {
-		ucsi->sync_val = -EBUSY;
-		complete(&ucsi->sync_ack);
-	} else if (ucsi->sync_pending &&
+	if (ucsi->sync_pending &&
 		   (cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE))) {
 		complete(&ucsi->sync_ack);
 	}
@@ -311,12 +309,14 @@ static void pmic_glink_ucsi_destroy(void *data)
 	mutex_unlock(&ucsi->lock);
 }
 
+static unsigned long quirk_sc8180x = UCSI_NO_PARTNER_PDOS;
+
 static const struct of_device_id pmic_glink_ucsi_of_quirks[] = {
-	{ .compatible = "qcom,qcm6490-pmic-glink", .data = (void *)UCSI_NO_PARTNER_PDOS, },
-	{ .compatible = "qcom,sc8180x-pmic-glink", .data = (void *)UCSI_NO_PARTNER_PDOS, },
-	{ .compatible = "qcom,sc8280xp-pmic-glink", .data = (void *)UCSI_NO_PARTNER_PDOS, },
-	{ .compatible = "qcom,sm8350-pmic-glink", .data = (void *)UCSI_NO_PARTNER_PDOS, },
-	{ .compatible = "qcom,sm8550-pmic-glink", .data = (void *)UCSI_NO_PARTNER_PDOS, },
+	{ .compatible = "qcom,qcm6490-pmic-glink", .data = &quirk_sc8180x, },
+	{ .compatible = "qcom,sc8180x-pmic-glink", .data = &quirk_sc8180x, },
+	{ .compatible = "qcom,sc8280xp-pmic-glink", .data = &quirk_sc8180x, },
+	{ .compatible = "qcom,sm8350-pmic-glink", .data = &quirk_sc8180x, },
+	{ .compatible = "qcom,sm8550-pmic-glink", .data = &quirk_sc8180x, },
 	{}
 };
 
@@ -354,7 +354,7 @@ static int pmic_glink_ucsi_probe(struct auxiliary_device *adev,
 
 	match = of_match_device(pmic_glink_ucsi_of_quirks, dev->parent);
 	if (match)
-		ucsi->ucsi->quirks = (unsigned long)match->data;
+		ucsi->ucsi->quirks = *(unsigned long *)match->data;
 
 	ucsi_set_drvdata(ucsi->ucsi, ucsi);