Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 403 insertions, 0 deletions

diff --git a/drivers/video/backlight/arcxcnn_bl.c b/drivers/video/backlight/arcxcnn_bl.c
new file mode 100644
index 0000000000..1d5a570cfe
--- /dev/null
+++ b/drivers/video/backlight/arcxcnn_bl.c
@@ -0,0 +1,403 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Backlight driver for ArcticSand ARC_X_C_0N_0N Devices
+ *
+ * Copyright 2016 ArcticSand, Inc.
+ * Author : Brian Dodge <bdodge@arcticsand.com>
+ */
+
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+
+enum arcxcnn_chip_id {
+	ARC2C0608
+};
+
+/**
+ * struct arcxcnn_platform_data
+ * @name		: Backlight driver name (NULL will use default)
+ * @initial_brightness	: initial value of backlight brightness
+ * @leden		: initial LED string enables, upper bit is global on/off
+ * @led_config_0	: fading speed (period between intensity steps)
+ * @led_config_1	: misc settings, see datasheet
+ * @dim_freq		: pwm dimming frequency if in pwm mode
+ * @comp_config		: misc config, see datasheet
+ * @filter_config	: RC/PWM filter config, see datasheet
+ * @trim_config		: full scale current trim, see datasheet
+ */
+struct arcxcnn_platform_data {
+	const char *name;
+	u16 initial_brightness;
+	u8	leden;
+	u8	led_config_0;
+	u8	led_config_1;
+	u8	dim_freq;
+	u8	comp_config;
+	u8	filter_config;
+	u8	trim_config;
+};
+
+#define ARCXCNN_CMD		0x00	/* Command Register */
+#define ARCXCNN_CMD_STDBY	0x80	/*   I2C Standby */
+#define ARCXCNN_CMD_RESET	0x40	/*   Reset */
+#define ARCXCNN_CMD_BOOST	0x10	/*   Boost */
+#define ARCXCNN_CMD_OVP_MASK	0x0C	/*   --- Over Voltage Threshold */
+#define ARCXCNN_CMD_OVP_XXV	0x0C	/*   <rsvrd> Over Voltage Threshold */
+#define ARCXCNN_CMD_OVP_20V	0x08	/*   20v Over Voltage Threshold */
+#define ARCXCNN_CMD_OVP_24V	0x04	/*   24v Over Voltage Threshold */
+#define ARCXCNN_CMD_OVP_31V	0x00	/*   31.4v Over Voltage Threshold */
+#define ARCXCNN_CMD_EXT_COMP	0x01	/*   part (0) or full (1) ext. comp */
+
+#define ARCXCNN_CONFIG		0x01	/* Configuration */
+#define ARCXCNN_STATUS1		0x02	/* Status 1 */
+#define ARCXCNN_STATUS2		0x03	/* Status 2 */
+#define ARCXCNN_FADECTRL	0x04	/* Fading Control */
+#define ARCXCNN_ILED_CONFIG	0x05	/* ILED Configuration */
+#define ARCXCNN_ILED_DIM_PWM	0x00	/*   config dim mode pwm */
+#define ARCXCNN_ILED_DIM_INT	0x04	/*   config dim mode internal */
+#define ARCXCNN_LEDEN		0x06	/* LED Enable Register */
+#define ARCXCNN_LEDEN_ISETEXT	0x80	/*   Full-scale current set extern */
+#define ARCXCNN_LEDEN_MASK	0x3F	/*   LED string enables mask */
+#define ARCXCNN_LEDEN_BITS	0x06	/*   Bits of LED string enables */
+#define ARCXCNN_LEDEN_LED1	0x01
+#define ARCXCNN_LEDEN_LED2	0x02
+#define ARCXCNN_LEDEN_LED3	0x04
+#define ARCXCNN_LEDEN_LED4	0x08
+#define ARCXCNN_LEDEN_LED5	0x10
+#define ARCXCNN_LEDEN_LED6	0x20
+
+#define ARCXCNN_WLED_ISET_LSB	0x07	/* LED ISET LSB (in upper nibble) */
+#define ARCXCNN_WLED_ISET_LSB_SHIFT 0x04  /* ISET LSB Left Shift */
+#define ARCXCNN_WLED_ISET_MSB	0x08	/* LED ISET MSB (8 bits) */
+
+#define ARCXCNN_DIMFREQ		0x09
+#define ARCXCNN_COMP_CONFIG	0x0A
+#define ARCXCNN_FILT_CONFIG	0x0B
+#define ARCXCNN_IMAXTUNE	0x0C
+#define ARCXCNN_ID_MSB		0x1E
+#define ARCXCNN_ID_LSB		0x1F
+
+#define MAX_BRIGHTNESS		4095
+#define INIT_BRIGHT		60
+
+struct arcxcnn {
+	struct i2c_client *client;
+	struct backlight_device *bl;
+	struct device *dev;
+	struct arcxcnn_platform_data *pdata;
+};
+
+static int arcxcnn_update_field(struct arcxcnn *lp, u8 reg, u8 mask, u8 data)
+{
+	int ret;
+	u8 tmp;
+
+	ret = i2c_smbus_read_byte_data(lp->client, reg);
+	if (ret < 0) {
+		dev_err(lp->dev, "failed to read 0x%.2x\n", reg);
+		return ret;
+	}
+
+	tmp = (u8)ret;
+	tmp &= ~mask;
+	tmp |= data & mask;
+
+	return i2c_smbus_write_byte_data(lp->client, reg, tmp);
+}
+
+static int arcxcnn_set_brightness(struct arcxcnn *lp, u32 brightness)
+{
+	int ret;
+	u8 val;
+
+	/* lower nibble of brightness goes in upper nibble of LSB register */
+	val = (brightness & 0xF) << ARCXCNN_WLED_ISET_LSB_SHIFT;
+	ret = i2c_smbus_write_byte_data(lp->client,
+		ARCXCNN_WLED_ISET_LSB, val);
+	if (ret < 0)
+		return ret;
+
+	/* remaining 8 bits of brightness go in MSB register */
+	val = (brightness >> 4);
+	return i2c_smbus_write_byte_data(lp->client,
+		ARCXCNN_WLED_ISET_MSB, val);
+}
+
+static int arcxcnn_bl_update_status(struct backlight_device *bl)
+{
+	struct arcxcnn *lp = bl_get_data(bl);
+	u32 brightness = backlight_get_brightness(bl);
+	int ret;
+
+	ret = arcxcnn_set_brightness(lp, brightness);
+	if (ret)
+		return ret;
+
+	/* set power-on/off/save modes */
+	return arcxcnn_update_field(lp, ARCXCNN_CMD, ARCXCNN_CMD_STDBY,
+		(bl->props.power == 0) ? 0 : ARCXCNN_CMD_STDBY);
+}
+
+static const struct backlight_ops arcxcnn_bl_ops = {
+	.options = BL_CORE_SUSPENDRESUME,
+	.update_status = arcxcnn_bl_update_status,
+};
+
+static int arcxcnn_backlight_register(struct arcxcnn *lp)
+{
+	struct backlight_properties *props;
+	const char *name = lp->pdata->name ? : "arctic_bl";
+
+	props = devm_kzalloc(lp->dev, sizeof(*props), GFP_KERNEL);
+	if (!props)
+		return -ENOMEM;
+
+	props->type = BACKLIGHT_PLATFORM;
+	props->max_brightness = MAX_BRIGHTNESS;
+
+	if (lp->pdata->initial_brightness > props->max_brightness)
+		lp->pdata->initial_brightness = props->max_brightness;
+
+	props->brightness = lp->pdata->initial_brightness;
+
+	lp->bl = devm_backlight_device_register(lp->dev, name, lp->dev, lp,
+				       &arcxcnn_bl_ops, props);
+	return PTR_ERR_OR_ZERO(lp->bl);
+}
+
+static void arcxcnn_parse_dt(struct arcxcnn *lp)
+{
+	struct device *dev = lp->dev;
+	struct device_node *node = dev->of_node;
+	u32 prog_val, num_entry, entry, sources[ARCXCNN_LEDEN_BITS];
+	int ret;
+
+	/* device tree entry isn't required, defaults are OK */
+	if (!node)
+		return;
+
+	ret = of_property_read_string(node, "label", &lp->pdata->name);
+	if (ret < 0)
+		lp->pdata->name = NULL;
+
+	ret = of_property_read_u32(node, "default-brightness", &prog_val);
+	if (ret == 0)
+		lp->pdata->initial_brightness = prog_val;
+
+	ret = of_property_read_u32(node, "arc,led-config-0", &prog_val);
+	if (ret == 0)
+		lp->pdata->led_config_0 = (u8)prog_val;
+
+	ret = of_property_read_u32(node, "arc,led-config-1", &prog_val);
+	if (ret == 0)
+		lp->pdata->led_config_1 = (u8)prog_val;
+
+	ret = of_property_read_u32(node, "arc,dim-freq", &prog_val);
+	if (ret == 0)
+		lp->pdata->dim_freq = (u8)prog_val;
+
+	ret = of_property_read_u32(node, "arc,comp-config", &prog_val);
+	if (ret == 0)
+		lp->pdata->comp_config = (u8)prog_val;
+
+	ret = of_property_read_u32(node, "arc,filter-config", &prog_val);
+	if (ret == 0)
+		lp->pdata->filter_config = (u8)prog_val;
+
+	ret = of_property_read_u32(node, "arc,trim-config", &prog_val);
+	if (ret == 0)
+		lp->pdata->trim_config = (u8)prog_val;
+
+	ret = of_property_count_u32_elems(node, "led-sources");
+	if (ret < 0) {
+		lp->pdata->leden = ARCXCNN_LEDEN_MASK; /* all on is default */
+	} else {
+		num_entry = ret;
+		if (num_entry > ARCXCNN_LEDEN_BITS)
+			num_entry = ARCXCNN_LEDEN_BITS;
+
+		ret = of_property_read_u32_array(node, "led-sources", sources,
+					num_entry);
+		if (ret < 0) {
+			dev_err(dev, "led-sources node is invalid.\n");
+			return;
+		}
+
+		lp->pdata->leden = 0;
+
+		/* for each enable in source, set bit in led enable */
+		for (entry = 0; entry < num_entry; entry++) {
+			u8 onbit = 1 << sources[entry];
+
+			lp->pdata->leden |= onbit;
+		}
+	}
+}
+
+static int arcxcnn_probe(struct i2c_client *cl)
+{
+	struct arcxcnn *lp;
+	int ret;
+
+	if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	lp = devm_kzalloc(&cl->dev, sizeof(*lp), GFP_KERNEL);
+	if (!lp)
+		return -ENOMEM;
+
+	lp->client = cl;
+	lp->dev = &cl->dev;
+	lp->pdata = dev_get_platdata(&cl->dev);
+
+	/* reset the device */
+	ret = i2c_smbus_write_byte_data(lp->client,
+		ARCXCNN_CMD, ARCXCNN_CMD_RESET);
+	if (ret)
+		goto probe_err;
+
+	if (!lp->pdata) {
+		lp->pdata = devm_kzalloc(lp->dev,
+				sizeof(*lp->pdata), GFP_KERNEL);
+		if (!lp->pdata)
+			return -ENOMEM;
+
+		/* Setup defaults based on power-on defaults */
+		lp->pdata->name = NULL;
+		lp->pdata->initial_brightness = INIT_BRIGHT;
+		lp->pdata->leden = ARCXCNN_LEDEN_MASK;
+
+		lp->pdata->led_config_0 = i2c_smbus_read_byte_data(
+			lp->client, ARCXCNN_FADECTRL);
+
+		lp->pdata->led_config_1 = i2c_smbus_read_byte_data(
+			lp->client, ARCXCNN_ILED_CONFIG);
+		/* insure dim mode is not default pwm */
+		lp->pdata->led_config_1 |= ARCXCNN_ILED_DIM_INT;
+
+		lp->pdata->dim_freq = i2c_smbus_read_byte_data(
+			lp->client, ARCXCNN_DIMFREQ);
+
+		lp->pdata->comp_config = i2c_smbus_read_byte_data(
+			lp->client, ARCXCNN_COMP_CONFIG);
+
+		lp->pdata->filter_config = i2c_smbus_read_byte_data(
+			lp->client, ARCXCNN_FILT_CONFIG);
+
+		lp->pdata->trim_config = i2c_smbus_read_byte_data(
+			lp->client, ARCXCNN_IMAXTUNE);
+
+		if (IS_ENABLED(CONFIG_OF))
+			arcxcnn_parse_dt(lp);
+	}
+
+	i2c_set_clientdata(cl, lp);
+
+	/* constrain settings to what is possible */
+	if (lp->pdata->initial_brightness > MAX_BRIGHTNESS)
+		lp->pdata->initial_brightness = MAX_BRIGHTNESS;
+
+	/* set initial brightness */
+	ret = arcxcnn_set_brightness(lp, lp->pdata->initial_brightness);
+	if (ret)
+		goto probe_err;
+
+	/* set other register values directly */
+	ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_FADECTRL,
+		lp->pdata->led_config_0);
+	if (ret)
+		goto probe_err;
+
+	ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_ILED_CONFIG,
+		lp->pdata->led_config_1);
+	if (ret)
+		goto probe_err;
+
+	ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_DIMFREQ,
+		lp->pdata->dim_freq);
+	if (ret)
+		goto probe_err;
+
+	ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_COMP_CONFIG,
+		lp->pdata->comp_config);
+	if (ret)
+		goto probe_err;
+
+	ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_FILT_CONFIG,
+		lp->pdata->filter_config);
+	if (ret)
+		goto probe_err;
+
+	ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_IMAXTUNE,
+		lp->pdata->trim_config);
+	if (ret)
+		goto probe_err;
+
+	/* set initial LED Enables */
+	arcxcnn_update_field(lp, ARCXCNN_LEDEN,
+		ARCXCNN_LEDEN_MASK, lp->pdata->leden);
+
+	ret = arcxcnn_backlight_register(lp);
+	if (ret)
+		goto probe_register_err;
+
+	backlight_update_status(lp->bl);
+
+	return 0;
+
+probe_register_err:
+	dev_err(lp->dev,
+		"failed to register backlight.\n");
+
+probe_err:
+	dev_err(lp->dev,
+		"failure ret: %d\n", ret);
+	return ret;
+}
+
+static void arcxcnn_remove(struct i2c_client *cl)
+{
+	struct arcxcnn *lp = i2c_get_clientdata(cl);
+
+	/* disable all strings (ignore errors) */
+	i2c_smbus_write_byte_data(lp->client,
+		ARCXCNN_LEDEN, 0x00);
+	/* reset the device (ignore errors) */
+	i2c_smbus_write_byte_data(lp->client,
+		ARCXCNN_CMD, ARCXCNN_CMD_RESET);
+
+	lp->bl->props.brightness = 0;
+
+	backlight_update_status(lp->bl);
+}
+
+static const struct of_device_id arcxcnn_dt_ids[] = {
+	{ .compatible = "arc,arc2c0608" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, arcxcnn_dt_ids);
+
+static const struct i2c_device_id arcxcnn_ids[] = {
+	{"arc2c0608", ARC2C0608},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, arcxcnn_ids);
+
+static struct i2c_driver arcxcnn_driver = {
+	.driver = {
+		.name = "arcxcnn_bl",
+		.of_match_table = arcxcnn_dt_ids,
+	},
+	.probe = arcxcnn_probe,
+	.remove = arcxcnn_remove,
+	.id_table = arcxcnn_ids,
+};
+module_i2c_driver(arcxcnn_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Brian Dodge <bdodge@arcticsand.com>");
+MODULE_DESCRIPTION("ARCXCNN Backlight driver");