Adding upstream version 6.8.9.upstream/6.8.9

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

9 files changed, 511 insertions, 349 deletions

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 51387b1ef0..ea2d0d69bd 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -235,13 +235,6 @@ config BACKLIGHT_HP700
 	  If you have an HP Jornada 700 series,
 	  say Y to include backlight control driver.
 
-config BACKLIGHT_CARILLO_RANCH
-	tristate "Intel Carillo Ranch Backlight Driver"
-	depends on LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578
-	help
-	  If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
-	  backlight driver.
-
 config BACKLIGHT_PWM
 	tristate "Generic PWM based Backlight Driver"
 	depends on PWM
@@ -402,6 +395,17 @@ config BACKLIGHT_LP8788
 	help
 	  This supports TI LP8788 backlight driver.
 
+config BACKLIGHT_MP3309C
+	tristate "Backlight Driver for MPS MP3309C"
+	depends on I2C && PWM
+	select REGMAP_I2C
+	help
+	  This supports MPS MP3309C backlight WLED driver in both PWM and
+	  analog/I2C dimming modes.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called mp3309c.
+
 config BACKLIGHT_PANDORA
 	tristate "Backlight driver for Pandora console"
 	depends on TWL4030_CORE
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index f72e1c3c59..06966cb204 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -25,7 +25,6 @@ obj-$(CONFIG_BACKLIGHT_ADP8870)		+= adp8870_bl.o
 obj-$(CONFIG_BACKLIGHT_APPLE)		+= apple_bl.o
 obj-$(CONFIG_BACKLIGHT_AS3711)		+= as3711_bl.o
 obj-$(CONFIG_BACKLIGHT_BD6107)		+= bd6107.o
-obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH)	+= cr_bllcd.o
 obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE)	+= backlight.o
 obj-$(CONFIG_BACKLIGHT_DA903X)		+= da903x_bl.o
 obj-$(CONFIG_BACKLIGHT_DA9052)		+= da9052_bl.o
@@ -44,6 +43,7 @@ obj-$(CONFIG_BACKLIGHT_LP855X)		+= lp855x_bl.o
 obj-$(CONFIG_BACKLIGHT_LP8788)		+= lp8788_bl.o
 obj-$(CONFIG_BACKLIGHT_LV5207LP)	+= lv5207lp.o
 obj-$(CONFIG_BACKLIGHT_MAX8925)		+= max8925_bl.o
+obj-$(CONFIG_BACKLIGHT_MP3309C)		+= mp3309c.o
 obj-$(CONFIG_BACKLIGHT_MT6370)		+= mt6370-backlight.o
 obj-$(CONFIG_BACKLIGHT_OMAP1)		+= omap1_bl.o
 obj-$(CONFIG_BACKLIGHT_PANDORA)		+= pandora_bl.o
diff --git a/drivers/video/backlight/cr_bllcd.c b/drivers/video/backlight/cr_bllcd.c
deleted file mode 100644
index 781aeecc45..0000000000
--- a/drivers/video/backlight/cr_bllcd.c
+++ /dev/null
@@ -1,264 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) Intel Corp. 2007.
- * All Rights Reserved.
- *
- * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
- * develop this driver.
- *
- * This file is part of the Carillo Ranch video subsystem driver.
- *
- * Authors:
- *   Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>
- *   Alan Hourihane <alanh-at-tungstengraphics-dot-com>
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mutex.h>
-#include <linux/fb.h>
-#include <linux/backlight.h>
-#include <linux/lcd.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-/* The LVDS- and panel power controls sits on the
- * GPIO port of the ISA bridge.
- */
-
-#define CRVML_DEVICE_LPC    0x27B8
-#define CRVML_REG_GPIOBAR   0x48
-#define CRVML_REG_GPIOEN    0x4C
-#define CRVML_GPIOEN_BIT    (1 << 4)
-#define CRVML_PANEL_PORT    0x38
-#define CRVML_LVDS_ON       0x00000001
-#define CRVML_PANEL_ON      0x00000002
-#define CRVML_BACKLIGHT_OFF 0x00000004
-
-/* The PLL Clock register sits on Host bridge */
-#define CRVML_DEVICE_MCH   0x5001
-#define CRVML_REG_MCHBAR   0x44
-#define CRVML_REG_MCHEN    0x54
-#define CRVML_MCHEN_BIT    (1 << 28)
-#define CRVML_MCHMAP_SIZE  4096
-#define CRVML_REG_CLOCK    0xc3c
-#define CRVML_CLOCK_SHIFT  8
-#define CRVML_CLOCK_MASK   0x00000f00
-
-static struct pci_dev *lpc_dev;
-static u32 gpio_bar;
-
-struct cr_panel {
-	struct backlight_device *cr_backlight_device;
-	struct lcd_device *cr_lcd_device;
-};
-
-static int cr_backlight_set_intensity(struct backlight_device *bd)
-{
-	u32 addr = gpio_bar + CRVML_PANEL_PORT;
-	u32 cur = inl(addr);
-
-	if (backlight_get_brightness(bd) == 0) {
-		/* OFF */
-		cur |= CRVML_BACKLIGHT_OFF;
-		outl(cur, addr);
-	} else {
-		/* FULL ON */
-		cur &= ~CRVML_BACKLIGHT_OFF;
-		outl(cur, addr);
-	}
-
-	return 0;
-}
-
-static int cr_backlight_get_intensity(struct backlight_device *bd)
-{
-	u32 addr = gpio_bar + CRVML_PANEL_PORT;
-	u32 cur = inl(addr);
-	u8 intensity;
-
-	if (cur & CRVML_BACKLIGHT_OFF)
-		intensity = 0;
-	else
-		intensity = 1;
-
-	return intensity;
-}
-
-static const struct backlight_ops cr_backlight_ops = {
-	.get_brightness = cr_backlight_get_intensity,
-	.update_status = cr_backlight_set_intensity,
-};
-
-static void cr_panel_on(void)
-{
-	u32 addr = gpio_bar + CRVML_PANEL_PORT;
-	u32 cur = inl(addr);
-
-	if (!(cur & CRVML_PANEL_ON)) {
-		/* Make sure LVDS controller is down. */
-		if (cur & 0x00000001) {
-			cur &= ~CRVML_LVDS_ON;
-			outl(cur, addr);
-		}
-		/* Power up Panel */
-		schedule_timeout(HZ / 10);
-		cur |= CRVML_PANEL_ON;
-		outl(cur, addr);
-	}
-
-	/* Power up LVDS controller */
-
-	if (!(cur & CRVML_LVDS_ON)) {
-		schedule_timeout(HZ / 10);
-		outl(cur | CRVML_LVDS_ON, addr);
-	}
-}
-
-static void cr_panel_off(void)
-{
-	u32 addr = gpio_bar + CRVML_PANEL_PORT;
-	u32 cur = inl(addr);
-
-	/* Power down LVDS controller first to avoid high currents */
-	if (cur & CRVML_LVDS_ON) {
-		cur &= ~CRVML_LVDS_ON;
-		outl(cur, addr);
-	}
-	if (cur & CRVML_PANEL_ON) {
-		schedule_timeout(HZ / 10);
-		outl(cur & ~CRVML_PANEL_ON, addr);
-	}
-}
-
-static int cr_lcd_set_power(struct lcd_device *ld, int power)
-{
-	if (power == FB_BLANK_UNBLANK)
-		cr_panel_on();
-	if (power == FB_BLANK_POWERDOWN)
-		cr_panel_off();
-
-	return 0;
-}
-
-static struct lcd_ops cr_lcd_ops = {
-	.set_power = cr_lcd_set_power,
-};
-
-static int cr_backlight_probe(struct platform_device *pdev)
-{
-	struct backlight_properties props;
-	struct backlight_device *bdp;
-	struct lcd_device *ldp;
-	struct cr_panel *crp;
-	u8 dev_en;
-
-	lpc_dev = pci_get_device(PCI_VENDOR_ID_INTEL,
-					CRVML_DEVICE_LPC, NULL);
-	if (!lpc_dev) {
-		pr_err("INTEL CARILLO RANCH LPC not found.\n");
-		return -ENODEV;
-	}
-
-	pci_read_config_byte(lpc_dev, CRVML_REG_GPIOEN, &dev_en);
-	if (!(dev_en & CRVML_GPIOEN_BIT)) {
-		pr_err("Carillo Ranch GPIO device was not enabled.\n");
-		pci_dev_put(lpc_dev);
-		return -ENODEV;
-	}
-
-	memset(&props, 0, sizeof(struct backlight_properties));
-	props.type = BACKLIGHT_RAW;
-	bdp = devm_backlight_device_register(&pdev->dev, "cr-backlight",
-					&pdev->dev, NULL, &cr_backlight_ops,
-					&props);
-	if (IS_ERR(bdp)) {
-		pci_dev_put(lpc_dev);
-		return PTR_ERR(bdp);
-	}
-
-	ldp = devm_lcd_device_register(&pdev->dev, "cr-lcd", &pdev->dev, NULL,
-					&cr_lcd_ops);
-	if (IS_ERR(ldp)) {
-		pci_dev_put(lpc_dev);
-		return PTR_ERR(ldp);
-	}
-
-	pci_read_config_dword(lpc_dev, CRVML_REG_GPIOBAR,
-			      &gpio_bar);
-	gpio_bar &= ~0x3F;
-
-	crp = devm_kzalloc(&pdev->dev, sizeof(*crp), GFP_KERNEL);
-	if (!crp) {
-		pci_dev_put(lpc_dev);
-		return -ENOMEM;
-	}
-
-	crp->cr_backlight_device = bdp;
-	crp->cr_lcd_device = ldp;
-	crp->cr_backlight_device->props.power = FB_BLANK_UNBLANK;
-	crp->cr_backlight_device->props.brightness = 0;
-	cr_backlight_set_intensity(crp->cr_backlight_device);
-	cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_UNBLANK);
-
-	platform_set_drvdata(pdev, crp);
-
-	return 0;
-}
-
-static void cr_backlight_remove(struct platform_device *pdev)
-{
-	struct cr_panel *crp = platform_get_drvdata(pdev);
-
-	crp->cr_backlight_device->props.power = FB_BLANK_POWERDOWN;
-	crp->cr_backlight_device->props.brightness = 0;
-	crp->cr_backlight_device->props.max_brightness = 0;
-	cr_backlight_set_intensity(crp->cr_backlight_device);
-	cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_POWERDOWN);
-	pci_dev_put(lpc_dev);
-}
-
-static struct platform_driver cr_backlight_driver = {
-	.probe = cr_backlight_probe,
-	.remove_new = cr_backlight_remove,
-	.driver = {
-		   .name = "cr_backlight",
-		   },
-};
-
-static struct platform_device *crp;
-
-static int __init cr_backlight_init(void)
-{
-	int ret = platform_driver_register(&cr_backlight_driver);
-
-	if (ret)
-		return ret;
-
-	crp = platform_device_register_simple("cr_backlight", -1, NULL, 0);
-	if (IS_ERR(crp)) {
-		platform_driver_unregister(&cr_backlight_driver);
-		return PTR_ERR(crp);
-	}
-
-	pr_info("Carillo Ranch Backlight Driver Initialized.\n");
-
-	return 0;
-}
-
-static void __exit cr_backlight_exit(void)
-{
-	platform_device_unregister(crp);
-	platform_driver_unregister(&cr_backlight_driver);
-}
-
-module_init(cr_backlight_init);
-module_exit(cr_backlight_exit);
-
-MODULE_AUTHOR("Tungsten Graphics Inc.");
-MODULE_DESCRIPTION("Carillo Ranch Backlight Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c
index f76d2469d4..bf18337ff0 100644
--- a/drivers/video/backlight/hx8357.c
+++ b/drivers/video/backlight/hx8357.c
@@ -6,11 +6,11 @@
  */
 
 #include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/lcd.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
 #include <linux/spi/spi.h>
 
 #define HX8357_NUM_IM_PINS	3
@@ -83,11 +83,10 @@
 #define HX8369_SET_GAMMA_CURVE_RELATED		0xe0
 
 struct hx8357_data {
-	unsigned		im_pins[HX8357_NUM_IM_PINS];
-	unsigned		reset;
+	struct gpio_descs	*im_pins;
+	struct gpio_desc	*reset;
 	struct spi_device	*spi;
 	int			state;
-	bool			use_im_pins;
 };
 
 static u8 hx8357_seq_power[] = {
@@ -321,11 +320,11 @@ static void hx8357_lcd_reset(struct lcd_device *lcdev)
 	struct hx8357_data *lcd = lcd_get_data(lcdev);
 
 	/* Reset the screen */
-	gpio_set_value(lcd->reset, 1);
+	gpiod_set_value(lcd->reset, 0);
 	usleep_range(10000, 12000);
-	gpio_set_value(lcd->reset, 0);
+	gpiod_set_value(lcd->reset, 1);
 	usleep_range(10000, 12000);
-	gpio_set_value(lcd->reset, 1);
+	gpiod_set_value(lcd->reset, 0);
 
 	/* The controller needs 120ms to recover from reset */
 	msleep(120);
@@ -340,10 +339,10 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
 	 * Set the interface selection pins to SPI mode, with three
 	 * wires
 	 */
-	if (lcd->use_im_pins) {
-		gpio_set_value_cansleep(lcd->im_pins[0], 1);
-		gpio_set_value_cansleep(lcd->im_pins[1], 0);
-		gpio_set_value_cansleep(lcd->im_pins[2], 1);
+	if (lcd->im_pins) {
+		gpiod_set_value_cansleep(lcd->im_pins->desc[0], 1);
+		gpiod_set_value_cansleep(lcd->im_pins->desc[1], 0);
+		gpiod_set_value_cansleep(lcd->im_pins->desc[2], 1);
 	}
 
 	ret = hx8357_spi_write_array(lcdev, hx8357_seq_power,
@@ -580,6 +579,7 @@ MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
 
 static int hx8357_probe(struct spi_device *spi)
 {
+	struct device *dev = &spi->dev;
 	struct lcd_device *lcdev;
 	struct hx8357_data *lcd;
 	const struct of_device_id *match;
@@ -601,48 +601,20 @@ static int hx8357_probe(struct spi_device *spi)
 	if (!match || !match->data)
 		return -EINVAL;
 
-	lcd->reset = of_get_named_gpio(spi->dev.of_node, "gpios-reset", 0);
-	if (!gpio_is_valid(lcd->reset)) {
-		dev_err(&spi->dev, "Missing dt property: gpios-reset\n");
-		return -EINVAL;
-	}
+	lcd->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(lcd->reset))
+		return dev_err_probe(dev, PTR_ERR(lcd->reset), "failed to request reset GPIO\n");
+	gpiod_set_consumer_name(lcd->reset, "hx8357-reset");
 
-	ret = devm_gpio_request_one(&spi->dev, lcd->reset,
-				    GPIOF_OUT_INIT_HIGH,
-				    "hx8357-reset");
-	if (ret) {
-		dev_err(&spi->dev,
-			"failed to request gpio %d: %d\n",
-			lcd->reset, ret);
-		return -EINVAL;
-	}
+	lcd->im_pins = devm_gpiod_get_array_optional(dev, "im", GPIOD_OUT_LOW);
+	if (IS_ERR(lcd->im_pins))
+		return dev_err_probe(dev, PTR_ERR(lcd->im_pins), "failed to request im GPIOs\n");
+	if (lcd->im_pins) {
+		if (lcd->im_pins->ndescs < HX8357_NUM_IM_PINS)
+			return dev_err_probe(dev, -EINVAL, "not enough im GPIOs\n");
 
-	if (of_property_present(spi->dev.of_node, "im-gpios")) {
-		lcd->use_im_pins = 1;
-
-		for (i = 0; i < HX8357_NUM_IM_PINS; i++) {
-			lcd->im_pins[i] = of_get_named_gpio(spi->dev.of_node,
-							    "im-gpios", i);
-			if (lcd->im_pins[i] == -EPROBE_DEFER) {
-				dev_info(&spi->dev, "GPIO requested is not here yet, deferring the probe\n");
-				return -EPROBE_DEFER;
-			}
-			if (!gpio_is_valid(lcd->im_pins[i])) {
-				dev_err(&spi->dev, "Missing dt property: im-gpios\n");
-				return -EINVAL;
-			}
-
-			ret = devm_gpio_request_one(&spi->dev, lcd->im_pins[i],
-						    GPIOF_OUT_INIT_LOW,
-						    "im_pins");
-			if (ret) {
-				dev_err(&spi->dev, "failed to request gpio %d: %d\n",
-					lcd->im_pins[i], ret);
-				return -EINVAL;
-			}
-		}
-	} else {
-		lcd->use_im_pins = 0;
+		for (i = 0; i < HX8357_NUM_IM_PINS; i++)
+			gpiod_set_consumer_name(lcd->im_pins->desc[i], "im_pins");
 	}
 
 	lcdev = devm_lcd_device_register(&spi->dev, "mxsfb", &spi->dev, lcd,
diff --git a/drivers/video/backlight/ili922x.c b/drivers/video/backlight/ili922x.c
index e7b6bd8279..c8e0e655dc 100644
--- a/drivers/video/backlight/ili922x.c
+++ b/drivers/video/backlight/ili922x.c
@@ -81,7 +81,7 @@
 #define START_RW_WRITE		0
 #define START_RW_READ		1
 
-/**
+/*
  * START_BYTE(id, rs, rw)
  *
  * Set the start byte according to the required operation.
@@ -100,7 +100,7 @@
 #define START_BYTE(id, rs, rw)	\
 	(0x70 | (((id) & 0x01) << 2) | (((rs) & 0x01) << 1) | ((rw) & 0x01))
 
-/**
+/*
  * CHECK_FREQ_REG(spi_device s, spi_transfer x) - Check the frequency
  *	for the SPI transfer. According to the datasheet, the controller
  *	accept higher frequency for the GRAM transfer, but it requires
@@ -269,6 +269,10 @@ static int ili922x_write(struct spi_device *spi, u8 reg, u16 value)
 	spi_message_add_tail(&xfer_regindex, &msg);
 
 	ret = spi_sync(spi, &msg);
+	if (ret < 0) {
+		dev_err(&spi->dev, "Error sending SPI message 0x%x", ret);
+		return ret;
+	}
 
 	spi_message_init(&msg);
 	tbuf[0] = set_tx_byte(START_BYTE(ili922x_id, START_RS_REG,
diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c
index 7115d7bb2a..26ff4178cc 100644
--- a/drivers/video/backlight/lm3630a_bl.c
+++ b/drivers/video/backlight/lm3630a_bl.c
@@ -180,7 +180,7 @@ static int lm3630a_pwm_ctrl(struct lm3630a_chip *pchip, int br, int br_max)
 
 	pchip->pwmd_state.enabled = pchip->pwmd_state.duty_cycle ? true : false;
 
-	return pwm_apply_state(pchip->pwmd, &pchip->pwmd_state);
+	return pwm_apply_might_sleep(pchip->pwmd, &pchip->pwmd_state);
 }
 
 /* update and get brightness */
diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
index da1f124db6..7075bfab59 100644
--- a/drivers/video/backlight/lp855x_bl.c
+++ b/drivers/video/backlight/lp855x_bl.c
@@ -234,7 +234,7 @@ static int lp855x_pwm_ctrl(struct lp855x *lp, int br, int max_br)
 	state.duty_cycle = div_u64(br * state.period, max_br);
 	state.enabled = state.duty_cycle;
 
-	return pwm_apply_state(lp->pwm, &state);
+	return pwm_apply_might_sleep(lp->pwm, &state);
 }
 
 static int lp855x_bl_update_status(struct backlight_device *bl)
diff --git a/drivers/video/backlight/mp3309c.c b/drivers/video/backlight/mp3309c.c
new file mode 100644
index 0000000000..34d71259fa
--- /dev/null
+++ b/drivers/video/backlight/mp3309c.c
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for MPS MP3309C White LED driver with I2C interface
+ *
+ * This driver support both analog (by I2C commands) and PWM dimming control
+ * modes.
+ *
+ * Copyright (C) 2023 ASEM Srl
+ * Author: Flavio Suligoi <f.suligoi@asem.it>
+ *
+ * Based on pwm_bl.c
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+
+#define REG_I2C_0	0x00
+#define REG_I2C_1	0x01
+
+#define REG_I2C_0_EN	0x80
+#define REG_I2C_0_D0	0x40
+#define REG_I2C_0_D1	0x20
+#define REG_I2C_0_D2	0x10
+#define REG_I2C_0_D3	0x08
+#define REG_I2C_0_D4	0x04
+#define REG_I2C_0_RSRV1	0x02
+#define REG_I2C_0_RSRV2	0x01
+
+#define REG_I2C_1_RSRV1	0x80
+#define REG_I2C_1_DIMS	0x40
+#define REG_I2C_1_SYNC	0x20
+#define REG_I2C_1_OVP0	0x10
+#define REG_I2C_1_OVP1	0x08
+#define REG_I2C_1_VOS	0x04
+#define REG_I2C_1_LEDO	0x02
+#define REG_I2C_1_OTP	0x01
+
+#define ANALOG_I2C_NUM_LEVELS	32		/* 0..31 */
+#define ANALOG_I2C_REG_MASK	0x7c
+
+#define MP3309C_PWM_DEFAULT_NUM_LEVELS	256	/* 0..255 */
+
+enum mp3309c_status_value {
+	FIRST_POWER_ON,
+	BACKLIGHT_OFF,
+	BACKLIGHT_ON,
+};
+
+enum mp3309c_dimming_mode_value {
+	DIMMING_PWM,
+	DIMMING_ANALOG_I2C,
+};
+
+struct mp3309c_platform_data {
+	unsigned int max_brightness;
+	unsigned int default_brightness;
+	unsigned int *levels;
+	u8  dimming_mode;
+	u8  over_voltage_protection;
+	bool sync_mode;
+	u8 status;
+};
+
+struct mp3309c_chip {
+	struct device *dev;
+	struct mp3309c_platform_data *pdata;
+	struct backlight_device *bl;
+	struct gpio_desc *enable_gpio;
+	struct regmap *regmap;
+	struct pwm_device *pwmd;
+};
+
+static const struct regmap_config mp3309c_regmap = {
+	.name = "mp3309c_regmap",
+	.reg_bits = 8,
+	.reg_stride = 1,
+	.val_bits = 8,
+	.max_register = REG_I2C_1,
+};
+
+static int mp3309c_enable_device(struct mp3309c_chip *chip)
+{
+	u8 reg_val;
+	int ret;
+
+	/* I2C register #0 - Device enable */
+	ret = regmap_update_bits(chip->regmap, REG_I2C_0, REG_I2C_0_EN,
+				 REG_I2C_0_EN);
+	if (ret)
+		return ret;
+
+	/*
+	 * I2C register #1 - Set working mode:
+	 *  - set one of the two dimming mode:
+	 *    - PWM dimming using an external PWM dimming signal
+	 *    - analog dimming using I2C commands
+	 *  - enable/disable synchronous mode
+	 *  - set overvoltage protection (OVP)
+	 */
+	reg_val = 0x00;
+	if (chip->pdata->dimming_mode == DIMMING_PWM)
+		reg_val |= REG_I2C_1_DIMS;
+	if (chip->pdata->sync_mode)
+		reg_val |= REG_I2C_1_SYNC;
+	reg_val |= chip->pdata->over_voltage_protection;
+	ret = regmap_write(chip->regmap, REG_I2C_1, reg_val);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int mp3309c_bl_update_status(struct backlight_device *bl)
+{
+	struct mp3309c_chip *chip = bl_get_data(bl);
+	int brightness = backlight_get_brightness(bl);
+	struct pwm_state pwmstate;
+	unsigned int analog_val, bits_val;
+	int i, ret;
+
+	if (chip->pdata->dimming_mode == DIMMING_PWM) {
+		/*
+		 * PWM control mode
+		 */
+		pwm_get_state(chip->pwmd, &pwmstate);
+		pwm_set_relative_duty_cycle(&pwmstate,
+					    chip->pdata->levels[brightness],
+					    chip->pdata->levels[chip->pdata->max_brightness]);
+		pwmstate.enabled = true;
+		ret = pwm_apply_state(chip->pwmd, &pwmstate);
+		if (ret)
+			return ret;
+
+		switch (chip->pdata->status) {
+		case FIRST_POWER_ON:
+		case BACKLIGHT_OFF:
+			/*
+			 * After 20ms of low pwm signal level, the chip turns
+			 * off automatically. In this case, before enabling the
+			 * chip again, we must wait about 10ms for pwm signal to
+			 * stabilize.
+			 */
+			if (brightness > 0) {
+				msleep(10);
+				mp3309c_enable_device(chip);
+				chip->pdata->status = BACKLIGHT_ON;
+			} else {
+				chip->pdata->status = BACKLIGHT_OFF;
+			}
+			break;
+		case BACKLIGHT_ON:
+			if (brightness == 0)
+				chip->pdata->status = BACKLIGHT_OFF;
+			break;
+		}
+	} else {
+		/*
+		 * Analog (by I2C command) control mode
+		 *
+		 * The first time, before setting brightness, we must enable the
+		 * device
+		 */
+		if (chip->pdata->status == FIRST_POWER_ON)
+			mp3309c_enable_device(chip);
+
+		/*
+		 * Dimming mode I2C command (fixed dimming range 0..31)
+		 *
+		 * The 5 bits of the dimming analog value D4..D0 is allocated
+		 * in the I2C register #0, in the following way:
+		 *
+		 *     +--+--+--+--+--+--+--+--+
+		 *     |EN|D0|D1|D2|D3|D4|XX|XX|
+		 *     +--+--+--+--+--+--+--+--+
+		 */
+		analog_val = brightness;
+		bits_val = 0;
+		for (i = 0; i <= 5; i++)
+			bits_val += ((analog_val >> i) & 0x01) << (6 - i);
+		ret = regmap_update_bits(chip->regmap, REG_I2C_0,
+					 ANALOG_I2C_REG_MASK, bits_val);
+		if (ret)
+			return ret;
+
+		if (brightness > 0)
+			chip->pdata->status = BACKLIGHT_ON;
+		else
+			chip->pdata->status = BACKLIGHT_OFF;
+	}
+
+	return 0;
+}
+
+static const struct backlight_ops mp3309c_bl_ops = {
+	.update_status = mp3309c_bl_update_status,
+};
+
+static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
+				 struct mp3309c_platform_data *pdata)
+{
+	struct device_node *node = chip->dev->of_node;
+	struct property *prop_pwms;
+	struct property *prop_levels = NULL;
+	int length = 0;
+	int ret, i;
+	unsigned int num_levels, tmp_value;
+
+	if (!node) {
+		dev_err(chip->dev, "failed to get DT node\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Dimming mode: the MP3309C provides two dimming control mode:
+	 *
+	 * - PWM mode
+	 * - Analog by I2C control mode (default)
+	 *
+	 * I2C control mode is assumed as default but, if the pwms property is
+	 * found in the backlight node, the mode switches to PWM mode.
+	 */
+	pdata->dimming_mode = DIMMING_ANALOG_I2C;
+	prop_pwms = of_find_property(node, "pwms", &length);
+	if (prop_pwms) {
+		chip->pwmd = devm_pwm_get(chip->dev, NULL);
+		if (IS_ERR(chip->pwmd))
+			return dev_err_probe(chip->dev, PTR_ERR(chip->pwmd),
+					     "error getting pwm data\n");
+		pdata->dimming_mode = DIMMING_PWM;
+		pwm_apply_args(chip->pwmd);
+	}
+
+	/*
+	 * In I2C control mode the dimming levels (0..31) are fixed by the
+	 * hardware, while in PWM control mode they can be chosen by the user,
+	 * to allow nonlinear mappings.
+	 */
+	if  (pdata->dimming_mode == DIMMING_ANALOG_I2C) {
+		/*
+		 * Analog (by I2C commands) control mode: fixed 0..31 brightness
+		 * levels
+		 */
+		num_levels = ANALOG_I2C_NUM_LEVELS;
+
+		/* Enable GPIO used in I2C dimming mode only */
+		chip->enable_gpio = devm_gpiod_get(chip->dev, "enable",
+						   GPIOD_OUT_HIGH);
+		if (IS_ERR(chip->enable_gpio))
+			return dev_err_probe(chip->dev,
+					     PTR_ERR(chip->enable_gpio),
+					     "error getting enable gpio\n");
+	} else {
+		/*
+		 * PWM control mode: check for brightness level in DT
+		 */
+		prop_levels = of_find_property(node, "brightness-levels",
+					       &length);
+		if (prop_levels) {
+			/* Read brightness levels from DT */
+			num_levels = length / sizeof(u32);
+			if (num_levels < 2)
+				return -EINVAL;
+		} else {
+			/* Use default brightness levels */
+			num_levels = MP3309C_PWM_DEFAULT_NUM_LEVELS;
+		}
+	}
+
+	/* Fill brightness levels array */
+	pdata->levels = devm_kcalloc(chip->dev, num_levels,
+				     sizeof(*pdata->levels), GFP_KERNEL);
+	if (!pdata->levels)
+		return -ENOMEM;
+	if (prop_levels) {
+		ret = of_property_read_u32_array(node, "brightness-levels",
+						 pdata->levels,
+						 num_levels);
+		if (ret < 0)
+			return ret;
+	} else {
+		for (i = 0; i < num_levels; i++)
+			pdata->levels[i] = i;
+	}
+
+	pdata->max_brightness = num_levels - 1;
+
+	ret = of_property_read_u32(node, "default-brightness",
+				   &pdata->default_brightness);
+	if (ret)
+		pdata->default_brightness = pdata->max_brightness;
+	if (pdata->default_brightness > pdata->max_brightness) {
+		dev_err(chip->dev,
+			"default brightness exceeds max brightness\n");
+		pdata->default_brightness = pdata->max_brightness;
+	}
+
+	/*
+	 * Over-voltage protection (OVP)
+	 *
+	 * This (optional) property values are:
+	 *
+	 *  - 13.5V
+	 *  - 24V
+	 *  - 35.5V (hardware default setting)
+	 *
+	 * If missing, the default value for OVP is 35.5V
+	 */
+	pdata->over_voltage_protection = REG_I2C_1_OVP1;
+	if (!of_property_read_u32(node, "mps,overvoltage-protection-microvolt",
+				  &tmp_value)) {
+		switch (tmp_value) {
+		case 13500000:
+			pdata->over_voltage_protection = 0x00;
+			break;
+		case 24000000:
+			pdata->over_voltage_protection = REG_I2C_1_OVP0;
+			break;
+		case 35500000:
+			pdata->over_voltage_protection = REG_I2C_1_OVP1;
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	/* Synchronous (default) and non-synchronous mode */
+	pdata->sync_mode = true;
+	if (of_property_read_bool(node, "mps,no-sync-mode"))
+		pdata->sync_mode = false;
+
+	return 0;
+}
+
+static int mp3309c_probe(struct i2c_client *client)
+{
+	struct mp3309c_platform_data *pdata = dev_get_platdata(&client->dev);
+	struct mp3309c_chip *chip;
+	struct backlight_properties props;
+	struct pwm_state pwmstate;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "failed to check i2c functionality\n");
+		return -EOPNOTSUPP;
+	}
+
+	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = &client->dev;
+
+	chip->regmap = devm_regmap_init_i2c(client, &mp3309c_regmap);
+	if (IS_ERR(chip->regmap))
+		return dev_err_probe(&client->dev, PTR_ERR(chip->regmap),
+				     "failed to allocate register map\n");
+
+	i2c_set_clientdata(client, chip);
+
+	if (!pdata) {
+		pdata = devm_kzalloc(chip->dev, sizeof(*pdata), GFP_KERNEL);
+		if (!pdata)
+			return -ENOMEM;
+
+		ret = pm3309c_parse_dt_node(chip, pdata);
+		if (ret)
+			return ret;
+	}
+	chip->pdata = pdata;
+
+	/* Backlight properties */
+	props.brightness = pdata->default_brightness;
+	props.max_brightness = pdata->max_brightness;
+	props.scale = BACKLIGHT_SCALE_LINEAR;
+	props.type = BACKLIGHT_RAW;
+	props.power = FB_BLANK_UNBLANK;
+	props.fb_blank = FB_BLANK_UNBLANK;
+	chip->bl = devm_backlight_device_register(chip->dev, "mp3309c",
+						  chip->dev, chip,
+						  &mp3309c_bl_ops, &props);
+	if (IS_ERR(chip->bl))
+		return dev_err_probe(chip->dev, PTR_ERR(chip->bl),
+				     "error registering backlight device\n");
+
+	/* In PWM dimming mode, enable pwm device */
+	if (chip->pdata->dimming_mode == DIMMING_PWM) {
+		pwm_init_state(chip->pwmd, &pwmstate);
+		pwm_set_relative_duty_cycle(&pwmstate,
+					    chip->pdata->default_brightness,
+					    chip->pdata->max_brightness);
+		pwmstate.enabled = true;
+		ret = pwm_apply_state(chip->pwmd, &pwmstate);
+		if (ret)
+			return dev_err_probe(chip->dev, ret,
+					     "error setting pwm device\n");
+	}
+
+	chip->pdata->status = FIRST_POWER_ON;
+	backlight_update_status(chip->bl);
+
+	return 0;
+}
+
+static void mp3309c_remove(struct i2c_client *client)
+{
+	struct mp3309c_chip *chip = i2c_get_clientdata(client);
+	struct backlight_device *bl = chip->bl;
+
+	bl->props.power = FB_BLANK_POWERDOWN;
+	bl->props.brightness = 0;
+	backlight_update_status(chip->bl);
+}
+
+static const struct of_device_id mp3309c_match_table[] = {
+	{ .compatible = "mps,mp3309c", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mp3309c_match_table);
+
+static const struct i2c_device_id mp3309c_id[] = {
+	{ "mp3309c", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mp3309c_id);
+
+static struct i2c_driver mp3309c_i2c_driver = {
+	.driver	= {
+			.name		= KBUILD_MODNAME,
+			.of_match_table	= mp3309c_match_table,
+	},
+	.probe		= mp3309c_probe,
+	.remove		= mp3309c_remove,
+	.id_table	= mp3309c_id,
+};
+
+module_i2c_driver(mp3309c_i2c_driver);
+
+MODULE_DESCRIPTION("Backlight Driver for MPS MP3309C");
+MODULE_AUTHOR("Flavio Suligoi <f.suligoi@asem.it>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index 289bd9ce4d..ffcebf6aa7 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -103,7 +103,7 @@ static int pwm_backlight_update_status(struct backlight_device *bl)
 		pwm_get_state(pb->pwm, &state);
 		state.duty_cycle = compute_duty_cycle(pb, brightness, &state);
 		state.enabled = true;
-		pwm_apply_state(pb->pwm, &state);
+		pwm_apply_might_sleep(pb->pwm, &state);
 
 		pwm_backlight_power_on(pb);
 	} else {
@@ -120,7 +120,7 @@ static int pwm_backlight_update_status(struct backlight_device *bl)
 		 * inactive output.
 		 */
 		state.enabled = !pb->power_supply && !pb->enable_gpio;
-		pwm_apply_state(pb->pwm, &state);
+		pwm_apply_might_sleep(pb->pwm, &state);
 	}
 
 	if (pb->notify_after)
@@ -461,10 +461,9 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 
 	if (!data) {
 		ret = pwm_backlight_parse_dt(&pdev->dev, &defdata);
-		if (ret < 0) {
-			dev_err(&pdev->dev, "failed to find platform data\n");
-			return ret;
-		}
+		if (ret < 0)
+			return dev_err_probe(&pdev->dev, ret,
+					     "failed to find platform data\n");
 
 		data = &defdata;
 	}
@@ -493,24 +492,27 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 	pb->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable",
 						  GPIOD_ASIS);
 	if (IS_ERR(pb->enable_gpio)) {
-		ret = PTR_ERR(pb->enable_gpio);
+		ret = dev_err_probe(&pdev->dev, PTR_ERR(pb->enable_gpio),
+				    "failed to acquire enable GPIO\n");
 		goto err_alloc;
 	}
 
 	pb->power_supply = devm_regulator_get_optional(&pdev->dev, "power");
 	if (IS_ERR(pb->power_supply)) {
 		ret = PTR_ERR(pb->power_supply);
-		if (ret == -ENODEV)
+		if (ret == -ENODEV) {
 			pb->power_supply = NULL;
-		else
+		} else {
+			dev_err_probe(&pdev->dev, ret,
+				      "failed to acquire power regulator\n");
 			goto err_alloc;
+		}
 	}
 
 	pb->pwm = devm_pwm_get(&pdev->dev, NULL);
 	if (IS_ERR(pb->pwm)) {
-		ret = PTR_ERR(pb->pwm);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "unable to request PWM\n");
+		ret = dev_err_probe(&pdev->dev, PTR_ERR(pb->pwm),
+				    "unable to request PWM\n");
 		goto err_alloc;
 	}
 
@@ -528,10 +530,10 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 	if (!state.period && (data->pwm_period_ns > 0))
 		state.period = data->pwm_period_ns;
 
-	ret = pwm_apply_state(pb->pwm, &state);
+	ret = pwm_apply_might_sleep(pb->pwm, &state);
 	if (ret) {
-		dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n",
-			ret);
+		dev_err_probe(&pdev->dev, ret,
+			      "failed to apply initial PWM state");
 		goto err_alloc;
 	}
 
@@ -568,8 +570,8 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 		ret = pwm_backlight_brightness_default(&pdev->dev, data,
 						       state.period);
 		if (ret < 0) {
-			dev_err(&pdev->dev,
-				"failed to setup default brightness table\n");
+			dev_err_probe(&pdev->dev, ret,
+				      "failed to setup default brightness table\n");
 			goto err_alloc;
 		}
 
@@ -597,8 +599,8 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 	bl = backlight_device_register(dev_name(&pdev->dev), &pdev->dev, pb,
 				       &pwm_backlight_ops, &props);
 	if (IS_ERR(bl)) {
-		dev_err(&pdev->dev, "failed to register backlight\n");
-		ret = PTR_ERR(bl);
+		ret = dev_err_probe(&pdev->dev, PTR_ERR(bl),
+				    "failed to register backlight\n");
 		goto err_alloc;
 	}
 
@@ -633,7 +635,7 @@ static void pwm_backlight_remove(struct platform_device *pdev)
 	pwm_get_state(pb->pwm, &state);
 	state.duty_cycle = 0;
 	state.enabled = false;
-	pwm_apply_state(pb->pwm, &state);
+	pwm_apply_might_sleep(pb->pwm, &state);
 
 	if (pb->exit)
 		pb->exit(&pdev->dev);
@@ -649,7 +651,7 @@ static void pwm_backlight_shutdown(struct platform_device *pdev)
 	pwm_get_state(pb->pwm, &state);
 	state.duty_cycle = 0;
 	state.enabled = false;
-	pwm_apply_state(pb->pwm, &state);
+	pwm_apply_might_sleep(pb->pwm, &state);
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -673,7 +675,7 @@ static int pwm_backlight_suspend(struct device *dev)
 	pwm_get_state(pb->pwm, &state);
 	state.duty_cycle = 0;
 	state.enabled = false;
-	pwm_apply_state(pb->pwm, &state);
+	pwm_apply_might_sleep(pb->pwm, &state);
 
 	if (pb->notify_after)
 		pb->notify_after(pb->dev, 0);