Adding upstream version 6.8.9.upstream/6.8.9

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

5 files changed, 471 insertions, 80 deletions

diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index ad31657328..513c0b1143 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -5,6 +5,17 @@
 
 menu "1-wire Bus Masters"
 
+config W1_MASTER_AMD_AXI
+	tristate "AMD AXI 1-wire bus host"
+	help
+	  Say Y here is you want to support the AMD AXI 1-wire IP core.
+	  This driver makes use of the programmable logic IP to perform
+	  correctly timed 1 wire transactions without relying on GPIO timing
+	  through the kernel.
+
+	  This driver can also be built as a module.  If so, the module will be
+	  called amd_w1_axi.
+
 config W1_MASTER_MATROX
 	tristate "Matrox G400 transport layer for 1-wire"
 	depends on PCI
diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile
index c5d85a827e..6c5a21f9b8 100644
--- a/drivers/w1/masters/Makefile
+++ b/drivers/w1/masters/Makefile
@@ -3,6 +3,7 @@
 # Makefile for 1-wire bus master drivers.
 #
 
+obj-$(CONFIG_W1_MASTER_AMD_AXI)		+= amd_axi_w1.o
 obj-$(CONFIG_W1_MASTER_MATROX)		+= matrox_w1.o
 obj-$(CONFIG_W1_MASTER_DS2490)		+= ds2490.o
 obj-$(CONFIG_W1_MASTER_DS2482)		+= ds2482.o
diff --git a/drivers/w1/masters/amd_axi_w1.c b/drivers/w1/masters/amd_axi_w1.c
new file mode 100644
index 0000000000..4d3a68ca92
--- /dev/null
+++ b/drivers/w1/masters/amd_axi_w1.c
@@ -0,0 +1,396 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * amd_axi_w1 - AMD 1Wire programmable logic bus host driver
+ *
+ * Copyright (C) 2022-2023 Advanced Micro Devices, Inc. All Rights Reserved.
+ */
+
+#include <linux/atomic.h>
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+
+#include <linux/w1.h>
+
+/* 1-wire AMD IP definition */
+#define AXIW1_IPID	0x10ee4453
+/* Registers offset */
+#define AXIW1_INST_REG	0x0
+#define AXIW1_CTRL_REG	0x4
+#define AXIW1_IRQE_REG	0x8
+#define AXIW1_STAT_REG	0xC
+#define AXIW1_DATA_REG	0x10
+#define AXIW1_IPVER_REG	0x18
+#define AXIW1_IPID_REG	0x1C
+/* Instructions */
+#define AXIW1_INITPRES	0x0800
+#define AXIW1_READBIT	0x0C00
+#define AXIW1_WRITEBIT	0x0E00
+#define AXIW1_READBYTE	0x0D00
+#define AXIW1_WRITEBYTE	0x0F00
+/* Status flag masks */
+#define AXIW1_DONE	BIT(0)
+#define AXIW1_READY	BIT(4)
+#define AXIW1_PRESENCE	BIT(31)
+#define AXIW1_MAJORVER_MASK	GENMASK(23, 8)
+#define AXIW1_MINORVER_MASK	GENMASK(7, 0)
+/* Control flag */
+#define AXIW1_GO	BIT(0)
+#define AXI_CLEAR	0
+#define AXI_RESET	BIT(31)
+#define AXIW1_READDATA	BIT(0)
+/* Interrupt Enable */
+#define AXIW1_READY_IRQ_EN	BIT(4)
+#define AXIW1_DONE_IRQ_EN	BIT(0)
+
+#define AXIW1_TIMEOUT	msecs_to_jiffies(100)
+
+#define DRIVER_NAME	"amd_axi_w1"
+
+struct amd_axi_w1_local {
+	struct device *dev;
+	void __iomem *base_addr;
+	int irq;
+	atomic_t flag;			/* Set on IRQ, cleared once serviced */
+	wait_queue_head_t wait_queue;
+	struct w1_bus_master bus_host;
+};
+
+/**
+ * amd_axi_w1_wait_irq_interruptible_timeout() - Wait for IRQ with timeout.
+ *
+ * @amd_axi_w1_local:	Pointer to device structure
+ * @IRQ:		IRQ channel to wait on
+ *
+ * Return:		%0 - OK, %-EINTR - Interrupted, %-EBUSY - Timed out
+ */
+static int amd_axi_w1_wait_irq_interruptible_timeout(struct amd_axi_w1_local *amd_axi_w1_local,
+						     u32 IRQ)
+{
+	int ret;
+
+	/* Enable the IRQ requested and wait for flag to indicate it's been triggered */
+	iowrite32(IRQ, amd_axi_w1_local->base_addr + AXIW1_IRQE_REG);
+	ret = wait_event_interruptible_timeout(amd_axi_w1_local->wait_queue,
+					       atomic_read(&amd_axi_w1_local->flag) != 0,
+					       AXIW1_TIMEOUT);
+	if (ret < 0) {
+		dev_err(amd_axi_w1_local->dev, "Wait IRQ Interrupted\n");
+		return -EINTR;
+	}
+
+	if (!ret) {
+		dev_err(amd_axi_w1_local->dev, "Wait IRQ Timeout\n");
+		return -EBUSY;
+	}
+
+	atomic_set(&amd_axi_w1_local->flag, 0);
+	return 0;
+}
+
+/**
+ * amd_axi_w1_touch_bit() - Performs the touch-bit function - write a 0 or 1 and reads the level.
+ *
+ * @data:	Pointer to device structure
+ * @bit:	The level to write
+ *
+ * Return:	The level read
+ */
+static u8 amd_axi_w1_touch_bit(void *data, u8 bit)
+{
+	struct amd_axi_w1_local *amd_axi_w1_local = data;
+	u8 val = 0;
+	int rc;
+
+	/* Wait for READY signal to be 1 to ensure 1-wire IP is ready */
+	while ((ioread32(amd_axi_w1_local->base_addr + AXIW1_STAT_REG) & AXIW1_READY) == 0) {
+		rc = amd_axi_w1_wait_irq_interruptible_timeout(amd_axi_w1_local,
+							       AXIW1_READY_IRQ_EN);
+		if (rc < 0)
+			return 1; /* Callee doesn't test for error. Return inactive bus state */
+	}
+
+	if (bit)
+		/* Read. Write read Bit command in register 0 */
+		iowrite32(AXIW1_READBIT, amd_axi_w1_local->base_addr + AXIW1_INST_REG);
+	else
+		/* Write. Write tx Bit command in instruction register with bit to transmit */
+		iowrite32(AXIW1_WRITEBIT + (bit & 0x01),
+			  amd_axi_w1_local->base_addr + AXIW1_INST_REG);
+
+	/* Write Go signal and clear control reset signal in control register */
+	iowrite32(AXIW1_GO, amd_axi_w1_local->base_addr + AXIW1_CTRL_REG);
+
+	/* Wait for done signal to be 1 */
+	while ((ioread32(amd_axi_w1_local->base_addr + AXIW1_STAT_REG) & AXIW1_DONE) != 1) {
+		rc = amd_axi_w1_wait_irq_interruptible_timeout(amd_axi_w1_local, AXIW1_DONE_IRQ_EN);
+		if (rc < 0)
+			return 1; /* Callee doesn't test for error. Return inactive bus state */
+	}
+
+	/* If read, Retrieve data from register */
+	if (bit)
+		val = (u8)(ioread32(amd_axi_w1_local->base_addr + AXIW1_DATA_REG) & AXIW1_READDATA);
+
+	/* Clear Go signal in register 1 */
+	iowrite32(AXI_CLEAR, amd_axi_w1_local->base_addr + AXIW1_CTRL_REG);
+
+	return val;
+}
+
+/**
+ * amd_axi_w1_read_byte - Performs the read byte function.
+ *
+ * @data:	Pointer to device structure
+ * Return:	The value read
+ */
+static u8 amd_axi_w1_read_byte(void *data)
+{
+	struct amd_axi_w1_local *amd_axi_w1_local = data;
+	u8 val = 0;
+	int rc;
+
+	/* Wait for READY signal to be 1 to ensure 1-wire IP is ready */
+	while ((ioread32(amd_axi_w1_local->base_addr + AXIW1_STAT_REG) & AXIW1_READY) == 0) {
+		rc = amd_axi_w1_wait_irq_interruptible_timeout(amd_axi_w1_local,
+							       AXIW1_READY_IRQ_EN);
+		if (rc < 0)
+			return 0xFF; /* Return inactive bus state */
+	}
+
+	/* Write read Byte command in instruction register*/
+	iowrite32(AXIW1_READBYTE, amd_axi_w1_local->base_addr + AXIW1_INST_REG);
+
+	/* Write Go signal and clear control reset signal in control register */
+	iowrite32(AXIW1_GO, amd_axi_w1_local->base_addr + AXIW1_CTRL_REG);
+
+	/* Wait for done signal to be 1 */
+	while ((ioread32(amd_axi_w1_local->base_addr + AXIW1_STAT_REG) & AXIW1_DONE) != 1) {
+		rc = amd_axi_w1_wait_irq_interruptible_timeout(amd_axi_w1_local, AXIW1_DONE_IRQ_EN);
+		if (rc < 0)
+			return 0xFF; /* Return inactive bus state */
+	}
+
+	/* Retrieve LSB bit in data register to get RX byte */
+	val = (u8)(ioread32(amd_axi_w1_local->base_addr + AXIW1_DATA_REG) & 0x000000FF);
+
+	/* Clear Go signal in control register */
+	iowrite32(AXI_CLEAR, amd_axi_w1_local->base_addr + AXIW1_CTRL_REG);
+
+	return val;
+}
+
+/**
+ * amd_axi_w1_write_byte - Performs the write byte function.
+ *
+ * @data:	The ds2482 channel pointer
+ * @val:	The value to write
+ */
+static void amd_axi_w1_write_byte(void *data, u8 val)
+{
+	struct amd_axi_w1_local *amd_axi_w1_local = data;
+	int rc;
+
+	/* Wait for READY signal to be 1 to ensure 1-wire IP is ready */
+	while ((ioread32(amd_axi_w1_local->base_addr + AXIW1_STAT_REG) & AXIW1_READY) == 0) {
+		rc = amd_axi_w1_wait_irq_interruptible_timeout(amd_axi_w1_local,
+							       AXIW1_READY_IRQ_EN);
+		if (rc < 0)
+			return;
+	}
+
+	/* Write tx Byte command in instruction register with bit to transmit */
+	iowrite32(AXIW1_WRITEBYTE + val, amd_axi_w1_local->base_addr + AXIW1_INST_REG);
+
+	/* Write Go signal and clear control reset signal in register 1 */
+	iowrite32(AXIW1_GO, amd_axi_w1_local->base_addr + AXIW1_CTRL_REG);
+
+	/* Wait for done signal to be 1 */
+	while ((ioread32(amd_axi_w1_local->base_addr + AXIW1_STAT_REG) & AXIW1_DONE) != 1) {
+		rc = amd_axi_w1_wait_irq_interruptible_timeout(amd_axi_w1_local,
+							       AXIW1_DONE_IRQ_EN);
+		if (rc < 0)
+			return;
+	}
+
+	/* Clear Go signal in control register */
+	iowrite32(AXI_CLEAR, amd_axi_w1_local->base_addr + AXIW1_CTRL_REG);
+}
+
+/**
+ * amd_axi_w1_reset_bus() - Issues a reset bus sequence.
+ *
+ * @data:	the bus host data struct
+ * Return:	0=Device present, 1=No device present or error
+ */
+static u8 amd_axi_w1_reset_bus(void *data)
+{
+	struct amd_axi_w1_local *amd_axi_w1_local = data;
+	u8 val = 0;
+	int rc;
+
+	/* Reset 1-wire Axi IP */
+	iowrite32(AXI_RESET, amd_axi_w1_local->base_addr + AXIW1_CTRL_REG);
+
+	/* Wait for READY signal to be 1 to ensure 1-wire IP is ready */
+	while ((ioread32(amd_axi_w1_local->base_addr + AXIW1_STAT_REG) & AXIW1_READY) == 0) {
+		rc = amd_axi_w1_wait_irq_interruptible_timeout(amd_axi_w1_local,
+							       AXIW1_READY_IRQ_EN);
+		if (rc < 0)
+			return 1; /* Something went wrong with the hardware */
+	}
+	/* Write Initialization command in instruction register */
+	iowrite32(AXIW1_INITPRES, amd_axi_w1_local->base_addr + AXIW1_INST_REG);
+
+	/* Write Go signal and clear control reset signal in register 1 */
+	iowrite32(AXIW1_GO, amd_axi_w1_local->base_addr + AXIW1_CTRL_REG);
+
+	/* Wait for done signal to be 1 */
+	while ((ioread32(amd_axi_w1_local->base_addr + AXIW1_STAT_REG) & AXIW1_DONE) != 1) {
+		rc = amd_axi_w1_wait_irq_interruptible_timeout(amd_axi_w1_local, AXIW1_DONE_IRQ_EN);
+		if (rc < 0)
+			return 1; /* Something went wrong with the hardware */
+	}
+	/* Retrieve MSB bit in status register to get failure bit */
+	if ((ioread32(amd_axi_w1_local->base_addr + AXIW1_STAT_REG) & AXIW1_PRESENCE) != 0)
+		val = 1;
+
+	/* Clear Go signal in control register */
+	iowrite32(AXI_CLEAR, amd_axi_w1_local->base_addr + AXIW1_CTRL_REG);
+
+	return val;
+}
+
+/* Reset the 1-wire AXI IP. Put the IP in reset state and clear registers */
+static void amd_axi_w1_reset(struct amd_axi_w1_local *amd_axi_w1_local)
+{
+	iowrite32(AXI_RESET, amd_axi_w1_local->base_addr + AXIW1_CTRL_REG);
+	iowrite32(AXI_CLEAR, amd_axi_w1_local->base_addr + AXIW1_INST_REG);
+	iowrite32(AXI_CLEAR, amd_axi_w1_local->base_addr + AXIW1_IRQE_REG);
+	iowrite32(AXI_CLEAR, amd_axi_w1_local->base_addr + AXIW1_STAT_REG);
+	iowrite32(AXI_CLEAR, amd_axi_w1_local->base_addr + AXIW1_DATA_REG);
+}
+
+static irqreturn_t amd_axi_w1_irq(int irq, void *lp)
+{
+	struct amd_axi_w1_local *amd_axi_w1_local = lp;
+
+	/* Reset interrupt trigger */
+	iowrite32(AXI_CLEAR, amd_axi_w1_local->base_addr + AXIW1_IRQE_REG);
+
+	atomic_set(&amd_axi_w1_local->flag, 1);
+	wake_up_interruptible(&amd_axi_w1_local->wait_queue);
+
+	return IRQ_HANDLED;
+}
+
+static int amd_axi_w1_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct amd_axi_w1_local *lp;
+	struct clk *clk;
+	u32 ver_major, ver_minor;
+	int val, rc = 0;
+
+	lp = devm_kzalloc(dev, sizeof(*lp), GFP_KERNEL);
+	if (!lp)
+		return -ENOMEM;
+
+	lp->dev = dev;
+	lp->base_addr = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(lp->base_addr))
+		return PTR_ERR(lp->base_addr);
+
+	lp->irq = platform_get_irq(pdev, 0);
+	if (lp->irq < 0)
+		return lp->irq;
+
+	rc = devm_request_irq(dev, lp->irq, &amd_axi_w1_irq, IRQF_TRIGGER_HIGH, DRIVER_NAME, lp);
+	if (rc)
+		return rc;
+
+	/* Initialize wait queue and flag */
+	init_waitqueue_head(&lp->wait_queue);
+
+	clk = devm_clk_get_enabled(dev, NULL);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	/* Verify IP presence in HW */
+	if (ioread32(lp->base_addr + AXIW1_IPID_REG) != AXIW1_IPID) {
+		dev_err(dev, "AMD 1-wire IP not detected in hardware\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Allow for future driver expansion supporting new hardware features
+	 * This driver currently only supports hardware 1.x, but include logic
+	 * to detect if a potentially incompatible future version is used
+	 * by reading major version ID. It is highly undesirable for new IP versions
+	 * to break the API, but this code will at least allow for graceful failure
+	 * should that happen. Future new features can be enabled by hardware
+	 * incrementing the minor version and augmenting the driver to detect capability
+	 * using the minor version number
+	 */
+	val = ioread32(lp->base_addr + AXIW1_IPVER_REG);
+	ver_major = FIELD_GET(AXIW1_MAJORVER_MASK, val);
+	ver_minor = FIELD_GET(AXIW1_MINORVER_MASK, val);
+
+	if (ver_major != 1) {
+		dev_err(dev, "AMD AXI W1 host version %u.%u is not supported by this driver",
+			ver_major, ver_minor);
+		return -ENODEV;
+	}
+
+	lp->bus_host.data = lp;
+	lp->bus_host.touch_bit = amd_axi_w1_touch_bit;
+	lp->bus_host.read_byte = amd_axi_w1_read_byte;
+	lp->bus_host.write_byte = amd_axi_w1_write_byte;
+	lp->bus_host.reset_bus = amd_axi_w1_reset_bus;
+
+	amd_axi_w1_reset(lp);
+
+	platform_set_drvdata(pdev, lp);
+	rc = w1_add_master_device(&lp->bus_host);
+	if (rc) {
+		dev_err(dev, "Could not add host device\n");
+		return rc;
+	}
+
+	return 0;
+}
+
+static void amd_axi_w1_remove(struct platform_device *pdev)
+{
+	struct amd_axi_w1_local *lp = platform_get_drvdata(pdev);
+
+	w1_remove_master_device(&lp->bus_host);
+}
+
+static const struct of_device_id amd_axi_w1_of_match[] = {
+	{ .compatible = "amd,axi-1wire-host" },
+	{ /* end of list */ },
+};
+MODULE_DEVICE_TABLE(of, amd_axi_w1_of_match);
+
+static struct platform_driver amd_axi_w1_driver = {
+	.probe = amd_axi_w1_probe,
+	.remove_new = amd_axi_w1_remove,
+	.driver = {
+		.name = DRIVER_NAME,
+		.of_match_table = amd_axi_w1_of_match,
+	},
+};
+module_platform_driver(amd_axi_w1_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kris Chaplin <kris.chaplin@amd.com>");
+MODULE_DESCRIPTION("Driver for AMD AXI 1 Wire IP core");
diff --git a/drivers/w1/masters/ds2490.c b/drivers/w1/masters/ds2490.c
index 5f5b97e247..e1cac0730c 100644
--- a/drivers/w1/masters/ds2490.c
+++ b/drivers/w1/masters/ds2490.c
@@ -98,6 +98,8 @@
 #define ST_EPOF				0x80
 /* Status transfer size, 16 bytes status, 16 byte result flags */
 #define ST_SIZE				0x20
+/* 1-wire data i/o fifo size, 128 bytes */
+#define FIFO_SIZE			0x80
 
 /* Result Register flags */
 #define RR_DETECT			0xA5 /* New device detected */
@@ -614,14 +616,11 @@ static int ds_read_byte(struct ds_device *dev, u8 *byte)
 	return 0;
 }
 
-static int ds_read_block(struct ds_device *dev, u8 *buf, int len)
+static int read_block_chunk(struct ds_device *dev, u8 *buf, int len)
 {
 	struct ds_status st;
 	int err;
 
-	if (len > 64*1024)
-		return -E2BIG;
-
 	memset(buf, 0xFF, len);
 
 	err = ds_send_data(dev, buf, len);
@@ -640,6 +639,24 @@ static int ds_read_block(struct ds_device *dev, u8 *buf, int len)
 	return err;
 }
 
+static int ds_read_block(struct ds_device *dev, u8 *buf, int len)
+{
+	int err, to_read, rem = len;
+
+	if (len > 64 * 1024)
+		return -E2BIG;
+
+	do {
+		to_read = rem <= FIFO_SIZE ? rem : FIFO_SIZE;
+		err = read_block_chunk(dev, &buf[len - rem], to_read);
+		if (err < 0)
+			return err;
+		rem -= to_read;
+	} while (rem);
+
+	return err;
+}
+
 static int ds_write_block(struct ds_device *dev, u8 *buf, int len)
 {
 	int err;
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index e45acb6d91..05c67038ed 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -9,7 +9,6 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <linux/w1-gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/of_platform.h>
 #include <linux/err.h>
@@ -18,27 +17,33 @@
 
 #include <linux/w1.h>
 
+struct w1_gpio_ddata {
+	struct gpio_desc *gpiod;
+	struct gpio_desc *pullup_gpiod;
+	unsigned int pullup_duration;
+};
+
 static u8 w1_gpio_set_pullup(void *data, int delay)
 {
-	struct w1_gpio_platform_data *pdata = data;
+	struct w1_gpio_ddata *ddata = data;
 
 	if (delay) {
-		pdata->pullup_duration = delay;
+		ddata->pullup_duration = delay;
 	} else {
-		if (pdata->pullup_duration) {
+		if (ddata->pullup_duration) {
 			/*
 			 * This will OVERRIDE open drain emulation and force-pull
 			 * the line high for some time.
 			 */
-			gpiod_set_raw_value(pdata->gpiod, 1);
-			msleep(pdata->pullup_duration);
+			gpiod_set_raw_value(ddata->gpiod, 1);
+			msleep(ddata->pullup_duration);
 			/*
 			 * This will simply set the line as input since we are doing
 			 * open drain emulation in the GPIO library.
 			 */
-			gpiod_set_value(pdata->gpiod, 1);
+			gpiod_set_value(ddata->gpiod, 1);
 		}
-		pdata->pullup_duration = 0;
+		ddata->pullup_duration = 0;
 	}
 
 	return 0;
@@ -46,16 +51,16 @@ static u8 w1_gpio_set_pullup(void *data, int delay)
 
 static void w1_gpio_write_bit(void *data, u8 bit)
 {
-	struct w1_gpio_platform_data *pdata = data;
+	struct w1_gpio_ddata *ddata = data;
 
-	gpiod_set_value(pdata->gpiod, bit);
+	gpiod_set_value(ddata->gpiod, bit);
 }
 
 static u8 w1_gpio_read_bit(void *data)
 {
-	struct w1_gpio_platform_data *pdata = data;
+	struct w1_gpio_ddata *ddata = data;
 
-	return gpiod_get_value(pdata->gpiod) ? 1 : 0;
+	return gpiod_get_value(ddata->gpiod) ? 1 : 0;
 }
 
 #if defined(CONFIG_OF)
@@ -69,58 +74,48 @@ MODULE_DEVICE_TABLE(of, w1_gpio_dt_ids);
 static int w1_gpio_probe(struct platform_device *pdev)
 {
 	struct w1_bus_master *master;
-	struct w1_gpio_platform_data *pdata;
+	struct w1_gpio_ddata *ddata;
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
 	/* Enforce open drain mode by default */
 	enum gpiod_flags gflags = GPIOD_OUT_LOW_OPEN_DRAIN;
 	int err;
 
-	if (of_have_populated_dt()) {
-		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
-		if (!pdata)
-			return -ENOMEM;
-
-		/*
-		 * This parameter means that something else than the gpiolib has
-		 * already set the line into open drain mode, so we should just
-		 * driver it high/low like we are in full control of the line and
-		 * open drain will happen transparently.
-		 */
-		if (of_property_present(np, "linux,open-drain"))
-			gflags = GPIOD_OUT_LOW;
-
-		pdev->dev.platform_data = pdata;
-	}
-	pdata = dev_get_platdata(dev);
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
 
-	if (!pdata) {
-		dev_err(dev, "No configuration data\n");
-		return -ENXIO;
-	}
+	/*
+	 * This parameter means that something else than the gpiolib has
+	 * already set the line into open drain mode, so we should just
+	 * driver it high/low like we are in full control of the line and
+	 * open drain will happen transparently.
+	 */
+	if (of_property_present(np, "linux,open-drain"))
+		gflags = GPIOD_OUT_LOW;
 
 	master = devm_kzalloc(dev, sizeof(struct w1_bus_master),
 			GFP_KERNEL);
 	if (!master)
 		return -ENOMEM;
 
-	pdata->gpiod = devm_gpiod_get_index(dev, NULL, 0, gflags);
-	if (IS_ERR(pdata->gpiod)) {
+	ddata->gpiod = devm_gpiod_get_index(dev, NULL, 0, gflags);
+	if (IS_ERR(ddata->gpiod)) {
 		dev_err(dev, "gpio_request (pin) failed\n");
-		return PTR_ERR(pdata->gpiod);
+		return PTR_ERR(ddata->gpiod);
 	}
 
-	pdata->pullup_gpiod =
+	ddata->pullup_gpiod =
 		devm_gpiod_get_index_optional(dev, NULL, 1, GPIOD_OUT_LOW);
-	if (IS_ERR(pdata->pullup_gpiod)) {
+	if (IS_ERR(ddata->pullup_gpiod)) {
 		dev_err(dev, "gpio_request_one "
 			"(ext_pullup_enable_pin) failed\n");
-		return PTR_ERR(pdata->pullup_gpiod);
+		return PTR_ERR(ddata->pullup_gpiod);
 	}
 
-	master->data = pdata;
+	master->data = ddata;
 	master->read_bit = w1_gpio_read_bit;
-	gpiod_direction_output(pdata->gpiod, 1);
+	gpiod_direction_output(ddata->gpiod, 1);
 	master->write_bit = w1_gpio_write_bit;
 
 	/*
@@ -138,11 +133,8 @@ static int w1_gpio_probe(struct platform_device *pdev)
 		return err;
 	}
 
-	if (pdata->enable_external_pullup)
-		pdata->enable_external_pullup(1);
-
-	if (pdata->pullup_gpiod)
-		gpiod_set_value(pdata->pullup_gpiod, 1);
+	if (ddata->pullup_gpiod)
+		gpiod_set_value(ddata->pullup_gpiod, 1);
 
 	platform_set_drvdata(pdev, master);
 
@@ -152,45 +144,19 @@ static int w1_gpio_probe(struct platform_device *pdev)
 static int w1_gpio_remove(struct platform_device *pdev)
 {
 	struct w1_bus_master *master = platform_get_drvdata(pdev);
-	struct w1_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev);
-
-	if (pdata->enable_external_pullup)
-		pdata->enable_external_pullup(0);
+	struct w1_gpio_ddata *ddata = master->data;
 
-	if (pdata->pullup_gpiod)
-		gpiod_set_value(pdata->pullup_gpiod, 0);
+	if (ddata->pullup_gpiod)
+		gpiod_set_value(ddata->pullup_gpiod, 0);
 
 	w1_remove_master_device(master);
 
 	return 0;
 }
 
-static int __maybe_unused w1_gpio_suspend(struct device *dev)
-{
-	struct w1_gpio_platform_data *pdata = dev_get_platdata(dev);
-
-	if (pdata->enable_external_pullup)
-		pdata->enable_external_pullup(0);
-
-	return 0;
-}
-
-static int __maybe_unused w1_gpio_resume(struct device *dev)
-{
-	struct w1_gpio_platform_data *pdata = dev_get_platdata(dev);
-
-	if (pdata->enable_external_pullup)
-		pdata->enable_external_pullup(1);
-
-	return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(w1_gpio_pm_ops, w1_gpio_suspend, w1_gpio_resume);
-
 static struct platform_driver w1_gpio_driver = {
 	.driver = {
 		.name	= "w1-gpio",
-		.pm	= &w1_gpio_pm_ops,
 		.of_match_table = of_match_ptr(w1_gpio_dt_ids),
 	},
 	.probe = w1_gpio_probe,