Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 339 insertions, 0 deletions

diff --git a/drivers/watchdog/bcm_kona_wdt.c b/drivers/watchdog/bcm_kona_wdt.c
new file mode 100644
index 0000000000..49e12d47b0
--- /dev/null
+++ b/drivers/watchdog/bcm_kona_wdt.c
@@ -0,0 +1,339 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ */
+
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+#define SECWDOG_CTRL_REG		0x00000000
+#define SECWDOG_COUNT_REG		0x00000004
+
+#define SECWDOG_RESERVED_MASK		0x1dffffff
+#define SECWDOG_WD_LOAD_FLAG		0x10000000
+#define SECWDOG_EN_MASK			0x08000000
+#define SECWDOG_SRSTEN_MASK		0x04000000
+#define SECWDOG_RES_MASK		0x00f00000
+#define SECWDOG_COUNT_MASK		0x000fffff
+
+#define SECWDOG_MAX_COUNT		SECWDOG_COUNT_MASK
+#define SECWDOG_CLKS_SHIFT		20
+#define SECWDOG_MAX_RES			15
+#define SECWDOG_DEFAULT_RESOLUTION	4
+#define SECWDOG_MAX_TRY			1000
+
+#define SECS_TO_TICKS(x, w)		((x) << (w)->resolution)
+#define TICKS_TO_SECS(x, w)		((x) >> (w)->resolution)
+
+#define BCM_KONA_WDT_NAME		"bcm_kona_wdt"
+
+struct bcm_kona_wdt {
+	void __iomem *base;
+	/*
+	 * One watchdog tick is 1/(2^resolution) seconds. Resolution can take
+	 * the values 0-15, meaning one tick can be 1s to 30.52us. Our default
+	 * resolution of 4 means one tick is 62.5ms.
+	 *
+	 * The watchdog counter is 20 bits. Depending on resolution, the maximum
+	 * counter value of 0xfffff expires after about 12 days (resolution 0)
+	 * down to only 32s (resolution 15). The default resolution of 4 gives
+	 * us a maximum of about 18 hours and 12 minutes before the watchdog
+	 * times out.
+	 */
+	int resolution;
+	spinlock_t lock;
+#ifdef CONFIG_BCM_KONA_WDT_DEBUG
+	unsigned long busy_count;
+	struct dentry *debugfs;
+#endif
+};
+
+static int secure_register_read(struct bcm_kona_wdt *wdt, uint32_t offset)
+{
+	uint32_t val;
+	unsigned count = 0;
+
+	/*
+	 * If the WD_LOAD_FLAG is set, the watchdog counter field is being
+	 * updated in hardware. Once the WD timer is updated in hardware, it
+	 * gets cleared.
+	 */
+	do {
+		if (unlikely(count > 1))
+			udelay(5);
+		val = readl_relaxed(wdt->base + offset);
+		count++;
+	} while ((val & SECWDOG_WD_LOAD_FLAG) && count < SECWDOG_MAX_TRY);
+
+#ifdef CONFIG_BCM_KONA_WDT_DEBUG
+	/* Remember the maximum number iterations due to WD_LOAD_FLAG */
+	if (count > wdt->busy_count)
+		wdt->busy_count = count;
+#endif
+
+	/* This is the only place we return a negative value. */
+	if (val & SECWDOG_WD_LOAD_FLAG)
+		return -ETIMEDOUT;
+
+	/* We always mask out reserved bits. */
+	val &= SECWDOG_RESERVED_MASK;
+
+	return val;
+}
+
+#ifdef CONFIG_BCM_KONA_WDT_DEBUG
+
+static int bcm_kona_show(struct seq_file *s, void *data)
+{
+	int ctl_val, cur_val;
+	unsigned long flags;
+	struct bcm_kona_wdt *wdt = s->private;
+
+	if (!wdt) {
+		seq_puts(s, "No device pointer\n");
+		return 0;
+	}
+
+	spin_lock_irqsave(&wdt->lock, flags);
+	ctl_val = secure_register_read(wdt, SECWDOG_CTRL_REG);
+	cur_val = secure_register_read(wdt, SECWDOG_COUNT_REG);
+	spin_unlock_irqrestore(&wdt->lock, flags);
+
+	if (ctl_val < 0 || cur_val < 0) {
+		seq_puts(s, "Error accessing hardware\n");
+	} else {
+		int ctl, cur, ctl_sec, cur_sec, res;
+
+		ctl = ctl_val & SECWDOG_COUNT_MASK;
+		res = (ctl_val & SECWDOG_RES_MASK) >> SECWDOG_CLKS_SHIFT;
+		cur = cur_val & SECWDOG_COUNT_MASK;
+		ctl_sec = TICKS_TO_SECS(ctl, wdt);
+		cur_sec = TICKS_TO_SECS(cur, wdt);
+		seq_printf(s,
+			   "Resolution: %d / %d\n"
+			   "Control: %d s / %d (%#x) ticks\n"
+			   "Current: %d s / %d (%#x) ticks\n"
+			   "Busy count: %lu\n",
+			   res, wdt->resolution,
+			   ctl_sec, ctl, ctl,
+			   cur_sec, cur, cur,
+			   wdt->busy_count);
+	}
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(bcm_kona);
+
+static void bcm_kona_wdt_debug_init(struct platform_device *pdev)
+{
+	struct dentry *dir;
+	struct bcm_kona_wdt *wdt = platform_get_drvdata(pdev);
+
+	if (!wdt)
+		return;
+
+	wdt->debugfs = NULL;
+
+	dir = debugfs_create_dir(BCM_KONA_WDT_NAME, NULL);
+
+	debugfs_create_file("info", S_IFREG | S_IRUGO, dir, wdt,
+			    &bcm_kona_fops);
+	wdt->debugfs = dir;
+}
+
+static void bcm_kona_wdt_debug_exit(struct platform_device *pdev)
+{
+	struct bcm_kona_wdt *wdt = platform_get_drvdata(pdev);
+
+	if (wdt)
+		debugfs_remove_recursive(wdt->debugfs);
+}
+
+#else
+
+static void bcm_kona_wdt_debug_init(struct platform_device *pdev) {}
+static void bcm_kona_wdt_debug_exit(struct platform_device *pdev) {}
+
+#endif /* CONFIG_BCM_KONA_WDT_DEBUG */
+
+static int bcm_kona_wdt_ctrl_reg_modify(struct bcm_kona_wdt *wdt,
+					unsigned mask, unsigned newval)
+{
+	int val;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&wdt->lock, flags);
+
+	val = secure_register_read(wdt, SECWDOG_CTRL_REG);
+	if (val < 0) {
+		ret = val;
+	} else {
+		val &= ~mask;
+		val |= newval;
+		writel_relaxed(val, wdt->base + SECWDOG_CTRL_REG);
+	}
+
+	spin_unlock_irqrestore(&wdt->lock, flags);
+
+	return ret;
+}
+
+static int bcm_kona_wdt_set_resolution_reg(struct bcm_kona_wdt *wdt)
+{
+	if (wdt->resolution > SECWDOG_MAX_RES)
+		return -EINVAL;
+
+	return bcm_kona_wdt_ctrl_reg_modify(wdt, SECWDOG_RES_MASK,
+					wdt->resolution << SECWDOG_CLKS_SHIFT);
+}
+
+static int bcm_kona_wdt_set_timeout_reg(struct watchdog_device *wdog,
+					unsigned watchdog_flags)
+{
+	struct bcm_kona_wdt *wdt = watchdog_get_drvdata(wdog);
+
+	return bcm_kona_wdt_ctrl_reg_modify(wdt, SECWDOG_COUNT_MASK,
+					SECS_TO_TICKS(wdog->timeout, wdt) |
+					watchdog_flags);
+}
+
+static int bcm_kona_wdt_set_timeout(struct watchdog_device *wdog,
+	unsigned int t)
+{
+	wdog->timeout = t;
+	return 0;
+}
+
+static unsigned int bcm_kona_wdt_get_timeleft(struct watchdog_device *wdog)
+{
+	struct bcm_kona_wdt *wdt = watchdog_get_drvdata(wdog);
+	int val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&wdt->lock, flags);
+	val = secure_register_read(wdt, SECWDOG_COUNT_REG);
+	spin_unlock_irqrestore(&wdt->lock, flags);
+
+	if (val < 0)
+		return val;
+
+	return TICKS_TO_SECS(val & SECWDOG_COUNT_MASK, wdt);
+}
+
+static int bcm_kona_wdt_start(struct watchdog_device *wdog)
+{
+	return bcm_kona_wdt_set_timeout_reg(wdog,
+					SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK);
+}
+
+static int bcm_kona_wdt_stop(struct watchdog_device *wdog)
+{
+	struct bcm_kona_wdt *wdt = watchdog_get_drvdata(wdog);
+
+	return bcm_kona_wdt_ctrl_reg_modify(wdt, SECWDOG_EN_MASK |
+					    SECWDOG_SRSTEN_MASK, 0);
+}
+
+static const struct watchdog_ops bcm_kona_wdt_ops = {
+	.owner =	THIS_MODULE,
+	.start =	bcm_kona_wdt_start,
+	.stop =		bcm_kona_wdt_stop,
+	.set_timeout =	bcm_kona_wdt_set_timeout,
+	.get_timeleft =	bcm_kona_wdt_get_timeleft,
+};
+
+static const struct watchdog_info bcm_kona_wdt_info = {
+	.options =	WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE |
+			WDIOF_KEEPALIVEPING,
+	.identity =	"Broadcom Kona Watchdog Timer",
+};
+
+static struct watchdog_device bcm_kona_wdt_wdd = {
+	.info =		&bcm_kona_wdt_info,
+	.ops =		&bcm_kona_wdt_ops,
+	.min_timeout =	1,
+	.max_timeout =	SECWDOG_MAX_COUNT >> SECWDOG_DEFAULT_RESOLUTION,
+	.timeout =	SECWDOG_MAX_COUNT >> SECWDOG_DEFAULT_RESOLUTION,
+};
+
+static int bcm_kona_wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct bcm_kona_wdt *wdt;
+	int ret;
+
+	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	spin_lock_init(&wdt->lock);
+
+	wdt->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(wdt->base))
+		return PTR_ERR(wdt->base);
+
+	wdt->resolution = SECWDOG_DEFAULT_RESOLUTION;
+	ret = bcm_kona_wdt_set_resolution_reg(wdt);
+	if (ret) {
+		dev_err(dev, "Failed to set resolution (error: %d)", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, wdt);
+	watchdog_set_drvdata(&bcm_kona_wdt_wdd, wdt);
+	bcm_kona_wdt_wdd.parent = dev;
+
+	ret = bcm_kona_wdt_set_timeout_reg(&bcm_kona_wdt_wdd, 0);
+	if (ret) {
+		dev_err(dev, "Failed set watchdog timeout");
+		return ret;
+	}
+
+	watchdog_stop_on_reboot(&bcm_kona_wdt_wdd);
+	watchdog_stop_on_unregister(&bcm_kona_wdt_wdd);
+	ret = devm_watchdog_register_device(dev, &bcm_kona_wdt_wdd);
+	if (ret)
+		return ret;
+
+	bcm_kona_wdt_debug_init(pdev);
+	dev_dbg(dev, "Broadcom Kona Watchdog Timer");
+
+	return 0;
+}
+
+static void bcm_kona_wdt_remove(struct platform_device *pdev)
+{
+	bcm_kona_wdt_debug_exit(pdev);
+	dev_dbg(&pdev->dev, "Watchdog driver disabled");
+}
+
+static const struct of_device_id bcm_kona_wdt_of_match[] = {
+	{ .compatible = "brcm,kona-wdt", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm_kona_wdt_of_match);
+
+static struct platform_driver bcm_kona_wdt_driver = {
+	.driver = {
+			.name = BCM_KONA_WDT_NAME,
+			.of_match_table = bcm_kona_wdt_of_match,
+		  },
+	.probe = bcm_kona_wdt_probe,
+	.remove_new = bcm_kona_wdt_remove,
+};
+
+module_platform_driver(bcm_kona_wdt_driver);
+
+MODULE_ALIAS("platform:" BCM_KONA_WDT_NAME);
+MODULE_AUTHOR("Markus Mayer <mmayer@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom Kona Watchdog Driver");
+MODULE_LICENSE("GPL v2");