Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 421 insertions, 0 deletions

diff --git a/drivers/watchdog/ibmasr.c b/drivers/watchdog/ibmasr.c
new file mode 100644
index 0000000000..6955c693b5
--- /dev/null
+++ b/drivers/watchdog/ibmasr.c
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * IBM Automatic Server Restart driver.
+ *
+ * Copyright (c) 2005 Andrey Panin <pazke@donpac.ru>
+ *
+ * Based on driver written by Pete Reynolds.
+ * Copyright (c) IBM Corporation, 1998-2004.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/timer.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/dmi.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+
+enum {
+	ASMTYPE_UNKNOWN,
+	ASMTYPE_TOPAZ,
+	ASMTYPE_JASPER,
+	ASMTYPE_PEARL,
+	ASMTYPE_JUNIPER,
+	ASMTYPE_SPRUCE,
+};
+
+#define TOPAZ_ASR_REG_OFFSET	4
+#define TOPAZ_ASR_TOGGLE	0x40
+#define TOPAZ_ASR_DISABLE	0x80
+
+/* PEARL ASR S/W REGISTER SUPERIO PORT ADDRESSES */
+#define PEARL_BASE	0xe04
+#define PEARL_WRITE	0xe06
+#define PEARL_READ	0xe07
+
+#define PEARL_ASR_DISABLE_MASK	0x80	/* bit 7: disable = 1, enable = 0 */
+#define PEARL_ASR_TOGGLE_MASK	0x40	/* bit 6: 0, then 1, then 0 */
+
+/* JASPER OFFSET FROM SIO BASE ADDR TO ASR S/W REGISTERS. */
+#define JASPER_ASR_REG_OFFSET	0x38
+
+#define JASPER_ASR_DISABLE_MASK	0x01	/* bit 0: disable = 1, enable = 0 */
+#define JASPER_ASR_TOGGLE_MASK	0x02	/* bit 1: 0, then 1, then 0 */
+
+#define JUNIPER_BASE_ADDRESS	0x54b	/* Base address of Juniper ASR */
+#define JUNIPER_ASR_DISABLE_MASK 0x01	/* bit 0: disable = 1 enable = 0 */
+#define JUNIPER_ASR_TOGGLE_MASK	0x02	/* bit 1: 0, then 1, then 0 */
+
+#define SPRUCE_BASE_ADDRESS	0x118e	/* Base address of Spruce ASR */
+#define SPRUCE_ASR_DISABLE_MASK	0x01	/* bit 1: disable = 1 enable = 0 */
+#define SPRUCE_ASR_TOGGLE_MASK	0x02	/* bit 0: 0, then 1, then 0 */
+
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+
+static unsigned long asr_is_open;
+static char asr_expect_close;
+
+static unsigned int asr_type, asr_base, asr_length;
+static unsigned int asr_read_addr, asr_write_addr;
+static unsigned char asr_toggle_mask, asr_disable_mask;
+static DEFINE_SPINLOCK(asr_lock);
+
+static void __asr_toggle(void)
+{
+	unsigned char reg;
+
+	reg = inb(asr_read_addr);
+
+	outb(reg & ~asr_toggle_mask, asr_write_addr);
+	reg = inb(asr_read_addr);
+
+	outb(reg | asr_toggle_mask, asr_write_addr);
+	reg = inb(asr_read_addr);
+
+	outb(reg & ~asr_toggle_mask, asr_write_addr);
+	reg = inb(asr_read_addr);
+}
+
+static void asr_toggle(void)
+{
+	spin_lock(&asr_lock);
+	__asr_toggle();
+	spin_unlock(&asr_lock);
+}
+
+static void asr_enable(void)
+{
+	unsigned char reg;
+
+	spin_lock(&asr_lock);
+	if (asr_type == ASMTYPE_TOPAZ) {
+		/* asr_write_addr == asr_read_addr */
+		reg = inb(asr_read_addr);
+		outb(reg & ~(TOPAZ_ASR_TOGGLE | TOPAZ_ASR_DISABLE),
+		     asr_read_addr);
+	} else {
+		/*
+		 * First make sure the hardware timer is reset by toggling
+		 * ASR hardware timer line.
+		 */
+		__asr_toggle();
+
+		reg = inb(asr_read_addr);
+		outb(reg & ~asr_disable_mask, asr_write_addr);
+	}
+	reg = inb(asr_read_addr);
+	spin_unlock(&asr_lock);
+}
+
+static void asr_disable(void)
+{
+	unsigned char reg;
+
+	spin_lock(&asr_lock);
+	reg = inb(asr_read_addr);
+
+	if (asr_type == ASMTYPE_TOPAZ)
+		/* asr_write_addr == asr_read_addr */
+		outb(reg | TOPAZ_ASR_TOGGLE | TOPAZ_ASR_DISABLE,
+		     asr_read_addr);
+	else {
+		outb(reg | asr_toggle_mask, asr_write_addr);
+		reg = inb(asr_read_addr);
+
+		outb(reg | asr_disable_mask, asr_write_addr);
+	}
+	reg = inb(asr_read_addr);
+	spin_unlock(&asr_lock);
+}
+
+static int __init asr_get_base_address(void)
+{
+	unsigned char low, high;
+	const char *type = "";
+
+	asr_length = 1;
+
+	switch (asr_type) {
+	case ASMTYPE_TOPAZ:
+		/* SELECT SuperIO CHIP FOR QUERYING
+		   (WRITE 0x07 TO BOTH 0x2E and 0x2F) */
+		outb(0x07, 0x2e);
+		outb(0x07, 0x2f);
+
+		/* SELECT AND READ THE HIGH-NIBBLE OF THE GPIO BASE ADDRESS */
+		outb(0x60, 0x2e);
+		high = inb(0x2f);
+
+		/* SELECT AND READ THE LOW-NIBBLE OF THE GPIO BASE ADDRESS */
+		outb(0x61, 0x2e);
+		low = inb(0x2f);
+
+		asr_base = (high << 16) | low;
+		asr_read_addr = asr_write_addr =
+			asr_base + TOPAZ_ASR_REG_OFFSET;
+		asr_length = 5;
+
+		break;
+
+	case ASMTYPE_JASPER:
+		type = "Jaspers ";
+#if 0
+		u32 r;
+		/* Suggested fix */
+		pdev = pci_get_bus_and_slot(0, DEVFN(0x1f, 0));
+		if (pdev == NULL)
+			return -ENODEV;
+		pci_read_config_dword(pdev, 0x58, &r);
+		asr_base = r & 0xFFFE;
+		pci_dev_put(pdev);
+#else
+		/* FIXME: need to use pci_config_lock here,
+		   but it's not exported */
+
+/*		spin_lock_irqsave(&pci_config_lock, flags);*/
+
+		/* Select the SuperIO chip in the PCI I/O port register */
+		outl(0x8000f858, 0xcf8);
+
+		/* BUS 0, Slot 1F, fnc 0, offset 58 */
+
+		/*
+		 * Read the base address for the SuperIO chip.
+		 * Only the lower 16 bits are valid, but the address is word
+		 * aligned so the last bit must be masked off.
+		 */
+		asr_base = inl(0xcfc) & 0xfffe;
+
+/*		spin_unlock_irqrestore(&pci_config_lock, flags);*/
+#endif
+		asr_read_addr = asr_write_addr =
+			asr_base + JASPER_ASR_REG_OFFSET;
+		asr_toggle_mask = JASPER_ASR_TOGGLE_MASK;
+		asr_disable_mask = JASPER_ASR_DISABLE_MASK;
+		asr_length = JASPER_ASR_REG_OFFSET + 1;
+
+		break;
+
+	case ASMTYPE_PEARL:
+		type = "Pearls ";
+		asr_base = PEARL_BASE;
+		asr_read_addr = PEARL_READ;
+		asr_write_addr = PEARL_WRITE;
+		asr_toggle_mask = PEARL_ASR_TOGGLE_MASK;
+		asr_disable_mask = PEARL_ASR_DISABLE_MASK;
+		asr_length = 4;
+		break;
+
+	case ASMTYPE_JUNIPER:
+		type = "Junipers ";
+		asr_base = JUNIPER_BASE_ADDRESS;
+		asr_read_addr = asr_write_addr = asr_base;
+		asr_toggle_mask = JUNIPER_ASR_TOGGLE_MASK;
+		asr_disable_mask = JUNIPER_ASR_DISABLE_MASK;
+		break;
+
+	case ASMTYPE_SPRUCE:
+		type = "Spruce's ";
+		asr_base = SPRUCE_BASE_ADDRESS;
+		asr_read_addr = asr_write_addr = asr_base;
+		asr_toggle_mask = SPRUCE_ASR_TOGGLE_MASK;
+		asr_disable_mask = SPRUCE_ASR_DISABLE_MASK;
+		break;
+	}
+
+	if (!request_region(asr_base, asr_length, "ibmasr")) {
+		pr_err("address %#x already in use\n", asr_base);
+		return -EBUSY;
+	}
+
+	pr_info("found %sASR @ addr %#x\n", type, asr_base);
+
+	return 0;
+}
+
+
+static ssize_t asr_write(struct file *file, const char __user *buf,
+			 size_t count, loff_t *ppos)
+{
+	if (count) {
+		if (!nowayout) {
+			size_t i;
+
+			/* In case it was set long ago */
+			asr_expect_close = 0;
+
+			for (i = 0; i != count; i++) {
+				char c;
+				if (get_user(c, buf + i))
+					return -EFAULT;
+				if (c == 'V')
+					asr_expect_close = 42;
+			}
+		}
+		asr_toggle();
+	}
+	return count;
+}
+
+static long asr_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	static const struct watchdog_info ident = {
+		.options =	WDIOF_KEEPALIVEPING |
+				WDIOF_MAGICCLOSE,
+		.identity =	"IBM ASR",
+	};
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int heartbeat;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+	{
+		int new_options, retval = -EINVAL;
+		if (get_user(new_options, p))
+			return -EFAULT;
+		if (new_options & WDIOS_DISABLECARD) {
+			asr_disable();
+			retval = 0;
+		}
+		if (new_options & WDIOS_ENABLECARD) {
+			asr_enable();
+			asr_toggle();
+			retval = 0;
+		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		asr_toggle();
+		return 0;
+	/*
+	 * The hardware has a fixed timeout value, so no WDIOC_SETTIMEOUT
+	 * and WDIOC_GETTIMEOUT always returns 256.
+	 */
+	case WDIOC_GETTIMEOUT:
+		heartbeat = 256;
+		return put_user(heartbeat, p);
+	default:
+		return -ENOTTY;
+	}
+}
+
+static int asr_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &asr_is_open))
+		return -EBUSY;
+
+	asr_toggle();
+	asr_enable();
+
+	return stream_open(inode, file);
+}
+
+static int asr_release(struct inode *inode, struct file *file)
+{
+	if (asr_expect_close == 42)
+		asr_disable();
+	else {
+		pr_crit("unexpected close, not stopping watchdog!\n");
+		asr_toggle();
+	}
+	clear_bit(0, &asr_is_open);
+	asr_expect_close = 0;
+	return 0;
+}
+
+static const struct file_operations asr_fops = {
+	.owner =		THIS_MODULE,
+	.llseek =		no_llseek,
+	.write =		asr_write,
+	.unlocked_ioctl =	asr_ioctl,
+	.compat_ioctl =		compat_ptr_ioctl,
+	.open =			asr_open,
+	.release =		asr_release,
+};
+
+static struct miscdevice asr_miscdev = {
+	.minor =	WATCHDOG_MINOR,
+	.name =		"watchdog",
+	.fops =		&asr_fops,
+};
+
+
+struct ibmasr_id {
+	const char *desc;
+	int type;
+};
+
+static struct ibmasr_id ibmasr_id_table[] __initdata = {
+	{ "IBM Automatic Server Restart - eserver xSeries 220", ASMTYPE_TOPAZ },
+	{ "IBM Automatic Server Restart - Machine Type 8673", ASMTYPE_PEARL },
+	{ "IBM Automatic Server Restart - Machine Type 8480", ASMTYPE_JASPER },
+	{ "IBM Automatic Server Restart - Machine Type 8482", ASMTYPE_JUNIPER },
+	{ "IBM Automatic Server Restart - Machine Type 8648", ASMTYPE_SPRUCE },
+	{ NULL }
+};
+
+static int __init ibmasr_init(void)
+{
+	struct ibmasr_id *id;
+	int rc;
+
+	for (id = ibmasr_id_table; id->desc; id++) {
+		if (dmi_find_device(DMI_DEV_TYPE_OTHER, id->desc, NULL)) {
+			asr_type = id->type;
+			break;
+		}
+	}
+
+	if (!asr_type)
+		return -ENODEV;
+
+	rc = asr_get_base_address();
+	if (rc)
+		return rc;
+
+	rc = misc_register(&asr_miscdev);
+	if (rc < 0) {
+		release_region(asr_base, asr_length);
+		pr_err("failed to register misc device\n");
+		return rc;
+	}
+
+	return 0;
+}
+
+static void __exit ibmasr_exit(void)
+{
+	if (!nowayout)
+		asr_disable();
+
+	misc_deregister(&asr_miscdev);
+
+	release_region(asr_base, asr_length);
+}
+
+module_init(ibmasr_init);
+module_exit(ibmasr_exit);
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+MODULE_DESCRIPTION("IBM Automatic Server Restart driver");
+MODULE_AUTHOR("Andrey Panin");
+MODULE_LICENSE("GPL");