Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 605 insertions, 0 deletions

diff --git a/fs/ocfs2/blockcheck.c b/fs/ocfs2/blockcheck.c
new file mode 100644
index 0000000000..863a531603
--- /dev/null
+++ b/fs/ocfs2/blockcheck.c
@@ -0,0 +1,605 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * blockcheck.c
+ *
+ * Checksum and ECC codes for the OCFS2 userspace library.
+ *
+ * Copyright (C) 2006, 2008 Oracle.  All rights reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/crc32.h>
+#include <linux/buffer_head.h>
+#include <linux/bitops.h>
+#include <linux/debugfs.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <asm/byteorder.h>
+
+#include <cluster/masklog.h>
+
+#include "ocfs2.h"
+
+#include "blockcheck.h"
+
+
+/*
+ * We use the following conventions:
+ *
+ * d = # data bits
+ * p = # parity bits
+ * c = # total code bits (d + p)
+ */
+
+
+/*
+ * Calculate the bit offset in the hamming code buffer based on the bit's
+ * offset in the data buffer.  Since the hamming code reserves all
+ * power-of-two bits for parity, the data bit number and the code bit
+ * number are offset by all the parity bits beforehand.
+ *
+ * Recall that bit numbers in hamming code are 1-based.  This function
+ * takes the 0-based data bit from the caller.
+ *
+ * An example.  Take bit 1 of the data buffer.  1 is a power of two (2^0),
+ * so it's a parity bit.  2 is a power of two (2^1), so it's a parity bit.
+ * 3 is not a power of two.  So bit 1 of the data buffer ends up as bit 3
+ * in the code buffer.
+ *
+ * The caller can pass in *p if it wants to keep track of the most recent
+ * number of parity bits added.  This allows the function to start the
+ * calculation at the last place.
+ */
+static unsigned int calc_code_bit(unsigned int i, unsigned int *p_cache)
+{
+	unsigned int b, p = 0;
+
+	/*
+	 * Data bits are 0-based, but we're talking code bits, which
+	 * are 1-based.
+	 */
+	b = i + 1;
+
+	/* Use the cache if it is there */
+	if (p_cache)
+		p = *p_cache;
+        b += p;
+
+	/*
+	 * For every power of two below our bit number, bump our bit.
+	 *
+	 * We compare with (b + 1) because we have to compare with what b
+	 * would be _if_ it were bumped up by the parity bit.  Capice?
+	 *
+	 * p is set above.
+	 */
+	for (; (1 << p) < (b + 1); p++)
+		b++;
+
+	if (p_cache)
+		*p_cache = p;
+
+	return b;
+}
+
+/*
+ * This is the low level encoder function.  It can be called across
+ * multiple hunks just like the crc32 code.  'd' is the number of bits
+ * _in_this_hunk_.  nr is the bit offset of this hunk.  So, if you had
+ * two 512B buffers, you would do it like so:
+ *
+ * parity = ocfs2_hamming_encode(0, buf1, 512 * 8, 0);
+ * parity = ocfs2_hamming_encode(parity, buf2, 512 * 8, 512 * 8);
+ *
+ * If you just have one buffer, use ocfs2_hamming_encode_block().
+ */
+u32 ocfs2_hamming_encode(u32 parity, void *data, unsigned int d, unsigned int nr)
+{
+	unsigned int i, b, p = 0;
+
+	BUG_ON(!d);
+
+	/*
+	 * b is the hamming code bit number.  Hamming code specifies a
+	 * 1-based array, but C uses 0-based.  So 'i' is for C, and 'b' is
+	 * for the algorithm.
+	 *
+	 * The i++ in the for loop is so that the start offset passed
+	 * to ocfs2_find_next_bit_set() is one greater than the previously
+	 * found bit.
+	 */
+	for (i = 0; (i = ocfs2_find_next_bit(data, d, i)) < d; i++)
+	{
+		/*
+		 * i is the offset in this hunk, nr + i is the total bit
+		 * offset.
+		 */
+		b = calc_code_bit(nr + i, &p);
+
+		/*
+		 * Data bits in the resultant code are checked by
+		 * parity bits that are part of the bit number
+		 * representation.  Huh?
+		 *
+		 * <wikipedia href="https://en.wikipedia.org/wiki/Hamming_code">
+		 * In other words, the parity bit at position 2^k
+		 * checks bits in positions having bit k set in
+		 * their binary representation.  Conversely, for
+		 * instance, bit 13, i.e. 1101(2), is checked by
+		 * bits 1000(2) = 8, 0100(2)=4 and 0001(2) = 1.
+		 * </wikipedia>
+		 *
+		 * Note that 'k' is the _code_ bit number.  'b' in
+		 * our loop.
+		 */
+		parity ^= b;
+	}
+
+	/* While the data buffer was treated as little endian, the
+	 * return value is in host endian. */
+	return parity;
+}
+
+u32 ocfs2_hamming_encode_block(void *data, unsigned int blocksize)
+{
+	return ocfs2_hamming_encode(0, data, blocksize * 8, 0);
+}
+
+/*
+ * Like ocfs2_hamming_encode(), this can handle hunks.  nr is the bit
+ * offset of the current hunk.  If bit to be fixed is not part of the
+ * current hunk, this does nothing.
+ *
+ * If you only have one hunk, use ocfs2_hamming_fix_block().
+ */
+void ocfs2_hamming_fix(void *data, unsigned int d, unsigned int nr,
+		       unsigned int fix)
+{
+	unsigned int i, b;
+
+	BUG_ON(!d);
+
+	/*
+	 * If the bit to fix has an hweight of 1, it's a parity bit.  One
+	 * busted parity bit is its own error.  Nothing to do here.
+	 */
+	if (hweight32(fix) == 1)
+		return;
+
+	/*
+	 * nr + d is the bit right past the data hunk we're looking at.
+	 * If fix after that, nothing to do
+	 */
+	if (fix >= calc_code_bit(nr + d, NULL))
+		return;
+
+	/*
+	 * nr is the offset in the data hunk we're starting at.  Let's
+	 * start b at the offset in the code buffer.  See hamming_encode()
+	 * for a more detailed description of 'b'.
+	 */
+	b = calc_code_bit(nr, NULL);
+	/* If the fix is before this hunk, nothing to do */
+	if (fix < b)
+		return;
+
+	for (i = 0; i < d; i++, b++)
+	{
+		/* Skip past parity bits */
+		while (hweight32(b) == 1)
+			b++;
+
+		/*
+		 * i is the offset in this data hunk.
+		 * nr + i is the offset in the total data buffer.
+		 * b is the offset in the total code buffer.
+		 *
+		 * Thus, when b == fix, bit i in the current hunk needs
+		 * fixing.
+		 */
+		if (b == fix)
+		{
+			if (ocfs2_test_bit(i, data))
+				ocfs2_clear_bit(i, data);
+			else
+				ocfs2_set_bit(i, data);
+			break;
+		}
+	}
+}
+
+void ocfs2_hamming_fix_block(void *data, unsigned int blocksize,
+			     unsigned int fix)
+{
+	ocfs2_hamming_fix(data, blocksize * 8, 0, fix);
+}
+
+
+/*
+ * Debugfs handling.
+ */
+
+#ifdef CONFIG_DEBUG_FS
+
+static int blockcheck_u64_get(void *data, u64 *val)
+{
+	*val = *(u64 *)data;
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(blockcheck_fops, blockcheck_u64_get, NULL, "%llu\n");
+
+static void ocfs2_blockcheck_debug_remove(struct ocfs2_blockcheck_stats *stats)
+{
+	if (stats) {
+		debugfs_remove_recursive(stats->b_debug_dir);
+		stats->b_debug_dir = NULL;
+	}
+}
+
+static void ocfs2_blockcheck_debug_install(struct ocfs2_blockcheck_stats *stats,
+					   struct dentry *parent)
+{
+	struct dentry *dir;
+
+	dir = debugfs_create_dir("blockcheck", parent);
+	stats->b_debug_dir = dir;
+
+	debugfs_create_file("blocks_checked", S_IFREG | S_IRUSR, dir,
+			    &stats->b_check_count, &blockcheck_fops);
+
+	debugfs_create_file("checksums_failed", S_IFREG | S_IRUSR, dir,
+			    &stats->b_failure_count, &blockcheck_fops);
+
+	debugfs_create_file("ecc_recoveries", S_IFREG | S_IRUSR, dir,
+			    &stats->b_recover_count, &blockcheck_fops);
+
+}
+#else
+static inline void ocfs2_blockcheck_debug_install(struct ocfs2_blockcheck_stats *stats,
+						  struct dentry *parent)
+{
+}
+
+static inline void ocfs2_blockcheck_debug_remove(struct ocfs2_blockcheck_stats *stats)
+{
+}
+#endif  /* CONFIG_DEBUG_FS */
+
+/* Always-called wrappers for starting and stopping the debugfs files */
+void ocfs2_blockcheck_stats_debugfs_install(struct ocfs2_blockcheck_stats *stats,
+					    struct dentry *parent)
+{
+	ocfs2_blockcheck_debug_install(stats, parent);
+}
+
+void ocfs2_blockcheck_stats_debugfs_remove(struct ocfs2_blockcheck_stats *stats)
+{
+	ocfs2_blockcheck_debug_remove(stats);
+}
+
+static void ocfs2_blockcheck_inc_check(struct ocfs2_blockcheck_stats *stats)
+{
+	u64 new_count;
+
+	if (!stats)
+		return;
+
+	spin_lock(&stats->b_lock);
+	stats->b_check_count++;
+	new_count = stats->b_check_count;
+	spin_unlock(&stats->b_lock);
+
+	if (!new_count)
+		mlog(ML_NOTICE, "Block check count has wrapped\n");
+}
+
+static void ocfs2_blockcheck_inc_failure(struct ocfs2_blockcheck_stats *stats)
+{
+	u64 new_count;
+
+	if (!stats)
+		return;
+
+	spin_lock(&stats->b_lock);
+	stats->b_failure_count++;
+	new_count = stats->b_failure_count;
+	spin_unlock(&stats->b_lock);
+
+	if (!new_count)
+		mlog(ML_NOTICE, "Checksum failure count has wrapped\n");
+}
+
+static void ocfs2_blockcheck_inc_recover(struct ocfs2_blockcheck_stats *stats)
+{
+	u64 new_count;
+
+	if (!stats)
+		return;
+
+	spin_lock(&stats->b_lock);
+	stats->b_recover_count++;
+	new_count = stats->b_recover_count;
+	spin_unlock(&stats->b_lock);
+
+	if (!new_count)
+		mlog(ML_NOTICE, "ECC recovery count has wrapped\n");
+}
+
+
+
+/*
+ * These are the low-level APIs for using the ocfs2_block_check structure.
+ */
+
+/*
+ * This function generates check information for a block.
+ * data is the block to be checked.  bc is a pointer to the
+ * ocfs2_block_check structure describing the crc32 and the ecc.
+ *
+ * bc should be a pointer inside data, as the function will
+ * take care of zeroing it before calculating the check information.  If
+ * bc does not point inside data, the caller must make sure any inline
+ * ocfs2_block_check structures are zeroed.
+ *
+ * The data buffer must be in on-disk endian (little endian for ocfs2).
+ * bc will be filled with little-endian values and will be ready to go to
+ * disk.
+ */
+void ocfs2_block_check_compute(void *data, size_t blocksize,
+			       struct ocfs2_block_check *bc)
+{
+	u32 crc;
+	u32 ecc;
+
+	memset(bc, 0, sizeof(struct ocfs2_block_check));
+
+	crc = crc32_le(~0, data, blocksize);
+	ecc = ocfs2_hamming_encode_block(data, blocksize);
+
+	/*
+	 * No ecc'd ocfs2 structure is larger than 4K, so ecc will be no
+	 * larger than 16 bits.
+	 */
+	BUG_ON(ecc > USHRT_MAX);
+
+	bc->bc_crc32e = cpu_to_le32(crc);
+	bc->bc_ecc = cpu_to_le16((u16)ecc);
+}
+
+/*
+ * This function validates existing check information.  Like _compute,
+ * the function will take care of zeroing bc before calculating check codes.
+ * If bc is not a pointer inside data, the caller must have zeroed any
+ * inline ocfs2_block_check structures.
+ *
+ * Again, the data passed in should be the on-disk endian.
+ */
+int ocfs2_block_check_validate(void *data, size_t blocksize,
+			       struct ocfs2_block_check *bc,
+			       struct ocfs2_blockcheck_stats *stats)
+{
+	int rc = 0;
+	u32 bc_crc32e;
+	u16 bc_ecc;
+	u32 crc, ecc;
+
+	ocfs2_blockcheck_inc_check(stats);
+
+	bc_crc32e = le32_to_cpu(bc->bc_crc32e);
+	bc_ecc = le16_to_cpu(bc->bc_ecc);
+
+	memset(bc, 0, sizeof(struct ocfs2_block_check));
+
+	/* Fast path - if the crc32 validates, we're good to go */
+	crc = crc32_le(~0, data, blocksize);
+	if (crc == bc_crc32e)
+		goto out;
+
+	ocfs2_blockcheck_inc_failure(stats);
+	mlog(ML_ERROR,
+	     "CRC32 failed: stored: 0x%x, computed 0x%x. Applying ECC.\n",
+	     (unsigned int)bc_crc32e, (unsigned int)crc);
+
+	/* Ok, try ECC fixups */
+	ecc = ocfs2_hamming_encode_block(data, blocksize);
+	ocfs2_hamming_fix_block(data, blocksize, ecc ^ bc_ecc);
+
+	/* And check the crc32 again */
+	crc = crc32_le(~0, data, blocksize);
+	if (crc == bc_crc32e) {
+		ocfs2_blockcheck_inc_recover(stats);
+		goto out;
+	}
+
+	mlog(ML_ERROR, "Fixed CRC32 failed: stored: 0x%x, computed 0x%x\n",
+	     (unsigned int)bc_crc32e, (unsigned int)crc);
+
+	rc = -EIO;
+
+out:
+	bc->bc_crc32e = cpu_to_le32(bc_crc32e);
+	bc->bc_ecc = cpu_to_le16(bc_ecc);
+
+	return rc;
+}
+
+/*
+ * This function generates check information for a list of buffer_heads.
+ * bhs is the blocks to be checked.  bc is a pointer to the
+ * ocfs2_block_check structure describing the crc32 and the ecc.
+ *
+ * bc should be a pointer inside data, as the function will
+ * take care of zeroing it before calculating the check information.  If
+ * bc does not point inside data, the caller must make sure any inline
+ * ocfs2_block_check structures are zeroed.
+ *
+ * The data buffer must be in on-disk endian (little endian for ocfs2).
+ * bc will be filled with little-endian values and will be ready to go to
+ * disk.
+ */
+void ocfs2_block_check_compute_bhs(struct buffer_head **bhs, int nr,
+				   struct ocfs2_block_check *bc)
+{
+	int i;
+	u32 crc, ecc;
+
+	BUG_ON(nr < 0);
+
+	if (!nr)
+		return;
+
+	memset(bc, 0, sizeof(struct ocfs2_block_check));
+
+	for (i = 0, crc = ~0, ecc = 0; i < nr; i++) {
+		crc = crc32_le(crc, bhs[i]->b_data, bhs[i]->b_size);
+		/*
+		 * The number of bits in a buffer is obviously b_size*8.
+		 * The offset of this buffer is b_size*i, so the bit offset
+		 * of this buffer is b_size*8*i.
+		 */
+		ecc = (u16)ocfs2_hamming_encode(ecc, bhs[i]->b_data,
+						bhs[i]->b_size * 8,
+						bhs[i]->b_size * 8 * i);
+	}
+
+	/*
+	 * No ecc'd ocfs2 structure is larger than 4K, so ecc will be no
+	 * larger than 16 bits.
+	 */
+	BUG_ON(ecc > USHRT_MAX);
+
+	bc->bc_crc32e = cpu_to_le32(crc);
+	bc->bc_ecc = cpu_to_le16((u16)ecc);
+}
+
+/*
+ * This function validates existing check information on a list of
+ * buffer_heads.  Like _compute_bhs, the function will take care of
+ * zeroing bc before calculating check codes.  If bc is not a pointer
+ * inside data, the caller must have zeroed any inline
+ * ocfs2_block_check structures.
+ *
+ * Again, the data passed in should be the on-disk endian.
+ */
+int ocfs2_block_check_validate_bhs(struct buffer_head **bhs, int nr,
+				   struct ocfs2_block_check *bc,
+				   struct ocfs2_blockcheck_stats *stats)
+{
+	int i, rc = 0;
+	u32 bc_crc32e;
+	u16 bc_ecc;
+	u32 crc, ecc, fix;
+
+	BUG_ON(nr < 0);
+
+	if (!nr)
+		return 0;
+
+	ocfs2_blockcheck_inc_check(stats);
+
+	bc_crc32e = le32_to_cpu(bc->bc_crc32e);
+	bc_ecc = le16_to_cpu(bc->bc_ecc);
+
+	memset(bc, 0, sizeof(struct ocfs2_block_check));
+
+	/* Fast path - if the crc32 validates, we're good to go */
+	for (i = 0, crc = ~0; i < nr; i++)
+		crc = crc32_le(crc, bhs[i]->b_data, bhs[i]->b_size);
+	if (crc == bc_crc32e)
+		goto out;
+
+	ocfs2_blockcheck_inc_failure(stats);
+	mlog(ML_ERROR,
+	     "CRC32 failed: stored: %u, computed %u.  Applying ECC.\n",
+	     (unsigned int)bc_crc32e, (unsigned int)crc);
+
+	/* Ok, try ECC fixups */
+	for (i = 0, ecc = 0; i < nr; i++) {
+		/*
+		 * The number of bits in a buffer is obviously b_size*8.
+		 * The offset of this buffer is b_size*i, so the bit offset
+		 * of this buffer is b_size*8*i.
+		 */
+		ecc = (u16)ocfs2_hamming_encode(ecc, bhs[i]->b_data,
+						bhs[i]->b_size * 8,
+						bhs[i]->b_size * 8 * i);
+	}
+	fix = ecc ^ bc_ecc;
+	for (i = 0; i < nr; i++) {
+		/*
+		 * Try the fix against each buffer.  It will only affect
+		 * one of them.
+		 */
+		ocfs2_hamming_fix(bhs[i]->b_data, bhs[i]->b_size * 8,
+				  bhs[i]->b_size * 8 * i, fix);
+	}
+
+	/* And check the crc32 again */
+	for (i = 0, crc = ~0; i < nr; i++)
+		crc = crc32_le(crc, bhs[i]->b_data, bhs[i]->b_size);
+	if (crc == bc_crc32e) {
+		ocfs2_blockcheck_inc_recover(stats);
+		goto out;
+	}
+
+	mlog(ML_ERROR, "Fixed CRC32 failed: stored: %u, computed %u\n",
+	     (unsigned int)bc_crc32e, (unsigned int)crc);
+
+	rc = -EIO;
+
+out:
+	bc->bc_crc32e = cpu_to_le32(bc_crc32e);
+	bc->bc_ecc = cpu_to_le16(bc_ecc);
+
+	return rc;
+}
+
+/*
+ * These are the main API.  They check the superblock flag before
+ * calling the underlying operations.
+ *
+ * They expect the buffer(s) to be in disk format.
+ */
+void ocfs2_compute_meta_ecc(struct super_block *sb, void *data,
+			    struct ocfs2_block_check *bc)
+{
+	if (ocfs2_meta_ecc(OCFS2_SB(sb)))
+		ocfs2_block_check_compute(data, sb->s_blocksize, bc);
+}
+
+int ocfs2_validate_meta_ecc(struct super_block *sb, void *data,
+			    struct ocfs2_block_check *bc)
+{
+	int rc = 0;
+	struct ocfs2_super *osb = OCFS2_SB(sb);
+
+	if (ocfs2_meta_ecc(osb))
+		rc = ocfs2_block_check_validate(data, sb->s_blocksize, bc,
+						&osb->osb_ecc_stats);
+
+	return rc;
+}
+
+void ocfs2_compute_meta_ecc_bhs(struct super_block *sb,
+				struct buffer_head **bhs, int nr,
+				struct ocfs2_block_check *bc)
+{
+	if (ocfs2_meta_ecc(OCFS2_SB(sb)))
+		ocfs2_block_check_compute_bhs(bhs, nr, bc);
+}
+
+int ocfs2_validate_meta_ecc_bhs(struct super_block *sb,
+				struct buffer_head **bhs, int nr,
+				struct ocfs2_block_check *bc)
+{
+	int rc = 0;
+	struct ocfs2_super *osb = OCFS2_SB(sb);
+
+	if (ocfs2_meta_ecc(osb))
+		rc = ocfs2_block_check_validate_bhs(bhs, nr, bc,
+						    &osb->osb_ecc_stats);
+
+	return rc;
+}
+