Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 111 insertions, 0 deletions

diff --git a/include/scsi/fc/fc_fc2.h b/include/scsi/fc/fc_fc2.h
new file mode 100644
index 0000000000..0ffd314ebf
--- /dev/null
+++ b/include/scsi/fc/fc_fc2.h
@@ -0,0 +1,111 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_FC2_H_
+#define _FC_FC2_H_
+
+/*
+ * Fibre Channel Exchanges and Sequences.
+ */
+#ifndef PACKED
+#define PACKED  __attribute__ ((__packed__))
+#endif /* PACKED */
+
+
+/*
+ * Sequence Status Block.
+ * This format is set by the FC-FS standard and is sent over the wire.
+ * Note that the fields aren't all naturally aligned.
+ */
+struct fc_ssb {
+	__u8	ssb_seq_id;		/* sequence ID */
+	__u8	_ssb_resvd;
+	__be16	ssb_low_seq_cnt;	/* lowest SEQ_CNT */
+
+	__be16	ssb_high_seq_cnt;	/* highest SEQ_CNT */
+	__be16	ssb_s_stat;		/* sequence status flags */
+
+	__be16	ssb_err_seq_cnt;	/* error SEQ_CNT */
+	__u8	ssb_fh_cs_ctl;		/* frame header CS_CTL */
+	__be16	ssb_fh_ox_id;		/* frame header OX_ID */
+	__be16	ssb_rx_id;		/* responder's exchange ID */
+	__u8	_ssb_resvd2[2];
+} PACKED;
+
+/*
+ * The SSB should be 17 bytes.  Since it's layout is somewhat strange,
+ * we define the size here so that code can ASSERT that the size comes out
+ * correct.
+ */
+#define FC_SSB_SIZE         17          /* length of fc_ssb for assert */
+
+/*
+ * ssb_s_stat - flags from FC-FS-2 T11/1619-D Rev 0.90.
+ */
+#define SSB_ST_RESP         (1 << 15)   /* sequence responder */
+#define SSB_ST_ACTIVE       (1 << 14)   /* sequence is active */
+#define SSB_ST_ABNORMAL     (1 << 12)   /* abnormal ending condition */
+
+#define SSB_ST_REQ_MASK     (3 << 10)   /* ACK, abort sequence condition */
+#define SSB_ST_REQ_CONT     (0 << 10)
+#define SSB_ST_REQ_ABORT    (1 << 10)
+#define SSB_ST_REQ_STOP     (2 << 10)
+#define SSB_ST_REQ_RETRANS  (3 << 10)
+
+#define SSB_ST_ABTS         (1 << 9)    /* ABTS protocol completed */
+#define SSB_ST_RETRANS      (1 << 8)    /* retransmission completed */
+#define SSB_ST_TIMEOUT      (1 << 7)    /* sequence timed out by recipient */
+#define SSB_ST_P_RJT        (1 << 6)    /* P_RJT transmitted */
+
+#define SSB_ST_CLASS_BIT    4           /* class of service field LSB */
+#define SSB_ST_CLASS_MASK   3           /* class of service mask */
+#define SSB_ST_ACK          (1 << 3)    /* ACK (EOFt or EOFdt) transmitted */
+
+/*
+ * Exchange Status Block.
+ * This format is set by the FC-FS standard and is sent over the wire.
+ * Note that the fields aren't all naturally aligned.
+ */
+struct fc_esb {
+	__u8	esb_cs_ctl;		/* CS_CTL for frame header */
+	__be16	esb_ox_id;		/* originator exchange ID */
+	__be16	esb_rx_id;		/* responder exchange ID */
+	__be32	esb_orig_fid;		/* fabric ID of originator */
+	__be32	esb_resp_fid;		/* fabric ID of responder */
+	__be32	esb_e_stat;		/* status */
+	__u8	_esb_resvd[4];
+	__u8	esb_service_params[112]; /* TBD */
+	__u8	esb_seq_status[8];	/* sequence statuses, 8 bytes each */
+} __attribute__((packed));
+
+/*
+ * Define expected size for ASSERTs.
+ * See comments on FC_SSB_SIZE.
+ */
+#define FC_ESB_SIZE         (1 + 5*4 + 112 + 8)     /* expected size */
+
+/*
+ * esb_e_stat - flags from FC-FS-2 T11/1619-D Rev 0.90.
+ */
+#define ESB_ST_RESP         (1 << 31)   /* responder to exchange */
+#define ESB_ST_SEQ_INIT     (1 << 30)   /* port holds sequence initiative */
+#define ESB_ST_COMPLETE     (1 << 29)   /* exchange is complete */
+#define ESB_ST_ABNORMAL     (1 << 28)   /* abnormal ending condition */
+#define ESB_ST_REC_QUAL     (1 << 26)   /* recovery qualifier active */
+
+#define ESB_ST_ERRP_BIT     24          /* LSB for error policy */
+#define ESB_ST_ERRP_MASK    (3 << 24)   /* mask for error policy */
+#define ESB_ST_ERRP_MULT    (0 << 24)   /* abort, discard multiple sequences */
+#define ESB_ST_ERRP_SING    (1 << 24)   /* abort, discard single sequence */
+#define ESB_ST_ERRP_INF     (2 << 24)   /* process with infinite buffers */
+#define ESB_ST_ERRP_IMM     (3 << 24)   /* discard mult. with immed. retran. */
+
+#define ESB_ST_OX_ID_INVL   (1 << 23)   /* originator XID invalid */
+#define ESB_ST_RX_ID_INVL   (1 << 22)   /* responder XID invalid */
+#define ESB_ST_PRI_INUSE    (1 << 21)   /* priority / preemption in use */
+
+#endif /* _FC_FC2_H_ */