Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 333 insertions, 0 deletions

diff --git a/include/scsi/sg.h b/include/scsi/sg.h
new file mode 100644
index 0000000000..af31cecd90
--- /dev/null
+++ b/include/scsi/sg.h
@@ -0,0 +1,333 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _SCSI_GENERIC_H
+#define _SCSI_GENERIC_H
+
+#include <linux/compiler.h>
+
+/*
+ * History:
+ *  Started: Aug 9 by Lawrence Foard (entropy@world.std.com), to allow user
+ *   process control of SCSI devices.
+ *  Development Sponsored by Killy Corp. NY NY
+ *
+ * Original driver (sg.h):
+ *       Copyright (C) 1992 Lawrence Foard
+ * Version 2 and 3 extensions to driver:
+ *	Copyright (C) 1998 - 2014 Douglas Gilbert
+ *
+ *  Version: 3.5.36 (20140603)
+ *  This version is for 2.6 and 3 series kernels.
+ *
+ * Documentation
+ * =============
+ * A web site for the SG device driver can be found at:
+ *	http://sg.danny.cz/sg  [alternatively check the MAINTAINERS file]
+ * The documentation for the sg version 3 driver can be found at:
+ *	http://sg.danny.cz/sg/p/sg_v3_ho.html
+ * Also see: <kernel_source>/Documentation/scsi/scsi-generic.rst
+ *
+ * For utility and test programs see: http://sg.danny.cz/sg/sg3_utils.html
+ */
+
+
+typedef struct sg_iovec /* same structure as used by readv() Linux system */
+{                       /* call. It defines one scatter-gather element. */
+    void __user *iov_base;      /* Starting address  */
+    size_t iov_len;             /* Length in bytes  */
+} sg_iovec_t;
+
+
+typedef struct sg_io_hdr
+{
+    int interface_id;           /* [i] 'S' for SCSI generic (required) */
+    int dxfer_direction;        /* [i] data transfer direction  */
+    unsigned char cmd_len;      /* [i] SCSI command length */
+    unsigned char mx_sb_len;    /* [i] max length to write to sbp */
+    unsigned short iovec_count; /* [i] 0 implies no scatter gather */
+    unsigned int dxfer_len;     /* [i] byte count of data transfer */
+    void __user *dxferp;	/* [i], [*io] points to data transfer memory
+					      or scatter gather list */
+    unsigned char __user *cmdp; /* [i], [*i] points to command to perform */
+    void __user *sbp;		/* [i], [*o] points to sense_buffer memory */
+    unsigned int timeout;       /* [i] MAX_UINT->no timeout (unit: millisec) */
+    unsigned int flags;         /* [i] 0 -> default, see SG_FLAG... */
+    int pack_id;                /* [i->o] unused internally (normally) */
+    void __user * usr_ptr;      /* [i->o] unused internally */
+    unsigned char status;       /* [o] scsi status */
+    unsigned char masked_status;/* [o] shifted, masked scsi status */
+    unsigned char msg_status;   /* [o] messaging level data (optional) */
+    unsigned char sb_len_wr;    /* [o] byte count actually written to sbp */
+    unsigned short host_status; /* [o] errors from host adapter */
+    unsigned short driver_status;/* [o] errors from software driver */
+    int resid;                  /* [o] dxfer_len - actual_transferred */
+    unsigned int duration;      /* [o] time taken by cmd (unit: millisec) */
+    unsigned int info;          /* [o] auxiliary information */
+} sg_io_hdr_t;  /* 64 bytes long (on i386) */
+
+#if defined(__KERNEL__)
+#include <linux/compat.h>
+
+struct compat_sg_io_hdr {
+	compat_int_t interface_id;	/* [i] 'S' for SCSI generic (required) */
+	compat_int_t dxfer_direction;	/* [i] data transfer direction  */
+	unsigned char cmd_len;		/* [i] SCSI command length ( <= 16 bytes) */
+	unsigned char mx_sb_len;	/* [i] max length to write to sbp */
+	unsigned short iovec_count;	/* [i] 0 implies no scatter gather */
+	compat_uint_t dxfer_len;	/* [i] byte count of data transfer */
+	compat_uint_t dxferp;		/* [i], [*io] points to data transfer memory
+						or scatter gather list */
+	compat_uptr_t cmdp;		/* [i], [*i] points to command to perform */
+	compat_uptr_t sbp;		/* [i], [*o] points to sense_buffer memory */
+	compat_uint_t timeout;		/* [i] MAX_UINT->no timeout (unit: millisec) */
+	compat_uint_t flags;		/* [i] 0 -> default, see SG_FLAG... */
+	compat_int_t pack_id;		/* [i->o] unused internally (normally) */
+	compat_uptr_t usr_ptr;		/* [i->o] unused internally */
+	unsigned char status;		/* [o] scsi status */
+	unsigned char masked_status;	/* [o] shifted, masked scsi status */
+	unsigned char msg_status;	/* [o] messaging level data (optional) */
+	unsigned char sb_len_wr;	/* [o] byte count actually written to sbp */
+	unsigned short host_status;	/* [o] errors from host adapter */
+	unsigned short driver_status;	/* [o] errors from software driver */
+	compat_int_t resid;		/* [o] dxfer_len - actual_transferred */
+	compat_uint_t duration;		/* [o] time taken by cmd (unit: millisec) */
+	compat_uint_t info;		/* [o] auxiliary information */
+};
+#endif
+
+#define SG_INTERFACE_ID_ORIG 'S'
+
+/* Use negative values to flag difference from original sg_header structure */
+#define SG_DXFER_NONE (-1)      /* e.g. a SCSI Test Unit Ready command */
+#define SG_DXFER_TO_DEV (-2)    /* e.g. a SCSI WRITE command */
+#define SG_DXFER_FROM_DEV (-3)  /* e.g. a SCSI READ command */
+#define SG_DXFER_TO_FROM_DEV (-4) /* treated like SG_DXFER_FROM_DEV with the
+				   additional property than during indirect
+				   IO the user buffer is copied into the
+				   kernel buffers before the transfer */
+#define SG_DXFER_UNKNOWN (-5)   /* Unknown data direction */
+
+/* following flag values can be "or"-ed together */
+#define SG_FLAG_DIRECT_IO 1     /* default is indirect IO */
+#define SG_FLAG_UNUSED_LUN_INHIBIT 2   /* default is overwrite lun in SCSI */
+				/* command block (when <= SCSI_2) */
+#define SG_FLAG_MMAP_IO 4       /* request memory mapped IO */
+#define SG_FLAG_NO_DXFER 0x10000 /* no transfer of kernel buffers to/from */
+				/* user space (debug indirect IO) */
+/* defaults:: for sg driver: Q_AT_HEAD; for block layer: Q_AT_TAIL */
+#define SG_FLAG_Q_AT_TAIL 0x10
+#define SG_FLAG_Q_AT_HEAD 0x20
+
+/* following 'info' values are "or"-ed together */
+#define SG_INFO_OK_MASK 0x1
+#define SG_INFO_OK 0x0          /* no sense, host nor driver "noise" */
+#define SG_INFO_CHECK 0x1       /* something abnormal happened */
+
+#define SG_INFO_DIRECT_IO_MASK 0x6
+#define SG_INFO_INDIRECT_IO 0x0 /* data xfer via kernel buffers (or no xfer) */
+#define SG_INFO_DIRECT_IO 0x2   /* direct IO requested and performed */
+#define SG_INFO_MIXED_IO 0x4    /* part direct, part indirect IO */
+
+/*
+ * Obsolete DRIVER_SENSE driver byte
+ *
+ * Originally the SCSI midlayer would set the DRIVER_SENSE driver byte when
+ * a sense code was generated and a sense buffer was allocated.
+ * However, as nowadays every scsi command has a sense code allocated this
+ * distinction became moot as one could check the sense buffer directly.
+ * Consequently this byte is not set anymore from the midlayer, but SG will
+ * keep setting this byte to be compatible with previous releases.
+ */
+#define DRIVER_SENSE 0x08
+/* Obsolete driver_byte() declaration */
+#define driver_byte(result) (((result) >> 24) & 0xff)
+
+/*
+ *  Original linux SCSI Status codes. They are shifted 1 bit right
+ *  from those found in the SCSI standards.
+ */
+
+#define GOOD                 0x00
+#define CHECK_CONDITION      0x01
+#define CONDITION_GOOD       0x02
+#define BUSY                 0x04
+#define INTERMEDIATE_GOOD    0x08
+#define INTERMEDIATE_C_GOOD  0x0a
+#define RESERVATION_CONFLICT 0x0c
+#define COMMAND_TERMINATED   0x11
+#define QUEUE_FULL           0x14
+#define ACA_ACTIVE           0x18
+#define TASK_ABORTED         0x20
+
+/* Obsolete status_byte() declaration */
+#define sg_status_byte(result) (((result) >> 1) & 0x7f)
+
+typedef struct sg_scsi_id { /* used by SG_GET_SCSI_ID ioctl() */
+    int host_no;        /* as in "scsi<n>" where 'n' is one of 0, 1, 2 etc */
+    int channel;
+    int scsi_id;        /* scsi id of target device */
+    int lun;
+    int scsi_type;      /* TYPE_... defined in scsi/scsi.h */
+    short h_cmd_per_lun;/* host (adapter) maximum commands per lun */
+    short d_queue_depth;/* device (or adapter) maximum queue length */
+    int unused[2];      /* probably find a good use, set 0 for now */
+} sg_scsi_id_t; /* 32 bytes long on i386 */
+
+typedef struct sg_req_info { /* used by SG_GET_REQUEST_TABLE ioctl() */
+    char req_state;     /* 0 -> not used, 1 -> written, 2 -> ready to read */
+    char orphan;        /* 0 -> normal request, 1 -> from interrupted SG_IO */
+    char sg_io_owned;   /* 0 -> complete with read(), 1 -> owned by SG_IO */
+    char problem;       /* 0 -> no problem detected, 1 -> error to report */
+    int pack_id;        /* pack_id associated with request */
+    void __user *usr_ptr;     /* user provided pointer (in new interface) */
+    unsigned int duration; /* millisecs elapsed since written (req_state==1)
+			      or request duration (req_state==2) */
+    int unused;
+} sg_req_info_t; /* 20 bytes long on i386 */
+
+
+/* IOCTLs: Those ioctls that are relevant to the SG 3.x drivers follow.
+ [Those that only apply to the SG 2.x drivers are at the end of the file.]
+ (_GET_s yield result via 'int *' 3rd argument unless otherwise indicated) */
+
+#define SG_EMULATED_HOST 0x2203 /* true for emulated host adapter (ATAPI) */
+
+/* Used to configure SCSI command transformation layer for ATAPI devices */
+/* Only supported by the ide-scsi driver */
+#define SG_SET_TRANSFORM 0x2204 /* N.B. 3rd arg is not pointer but value: */
+		      /* 3rd arg = 0 to disable transform, 1 to enable it */
+#define SG_GET_TRANSFORM 0x2205
+
+#define SG_SET_RESERVED_SIZE 0x2275  /* request a new reserved buffer size */
+#define SG_GET_RESERVED_SIZE 0x2272  /* actual size of reserved buffer */
+
+/* The following ioctl has a 'sg_scsi_id_t *' object as its 3rd argument. */
+#define SG_GET_SCSI_ID 0x2276   /* Yields fd's bus, chan, dev, lun + type */
+/* SCSI id information can also be obtained from SCSI_IOCTL_GET_IDLUN */
+
+/* Override host setting and always DMA using low memory ( <16MB on i386) */
+#define SG_SET_FORCE_LOW_DMA 0x2279  /* 0-> use adapter setting, 1-> force */
+#define SG_GET_LOW_DMA 0x227a   /* 0-> use all ram for dma; 1-> low dma ram */
+
+/* When SG_SET_FORCE_PACK_ID set to 1, pack_id is input to read() which
+   tries to fetch a packet with a matching pack_id, waits, or returns EAGAIN.
+   If pack_id is -1 then read oldest waiting. When ...FORCE_PACK_ID set to 0
+   then pack_id ignored by read() and oldest readable fetched. */
+#define SG_SET_FORCE_PACK_ID 0x227b
+#define SG_GET_PACK_ID 0x227c /* Yields oldest readable pack_id (or -1) */
+
+#define SG_GET_NUM_WAITING 0x227d /* Number of commands awaiting read() */
+
+/* Yields max scatter gather tablesize allowed by current host adapter */
+#define SG_GET_SG_TABLESIZE 0x227F  /* 0 implies can't do scatter gather */
+
+#define SG_GET_VERSION_NUM 0x2282 /* Example: version 2.1.34 yields 20134 */
+
+/* Returns -EBUSY if occupied. 3rd argument pointer to int (see next) */
+#define SG_SCSI_RESET 0x2284
+/* Associated values that can be given to SG_SCSI_RESET follow.
+ * SG_SCSI_RESET_NO_ESCALATE may be OR-ed to the _DEVICE, _TARGET, _BUS
+ * or _HOST reset value so only that action is attempted. */
+#define		SG_SCSI_RESET_NOTHING	0
+#define		SG_SCSI_RESET_DEVICE	1
+#define		SG_SCSI_RESET_BUS	2
+#define		SG_SCSI_RESET_HOST	3
+#define		SG_SCSI_RESET_TARGET	4
+#define		SG_SCSI_RESET_NO_ESCALATE	0x100
+
+/* synchronous SCSI command ioctl, (only in version 3 interface) */
+#define SG_IO 0x2285   /* similar effect as write() followed by read() */
+
+#define SG_GET_REQUEST_TABLE 0x2286   /* yields table of active requests */
+
+/* How to treat EINTR during SG_IO ioctl(), only in SG 3.x series */
+#define SG_SET_KEEP_ORPHAN 0x2287 /* 1 -> hold for read(), 0 -> drop (def) */
+#define SG_GET_KEEP_ORPHAN 0x2288
+
+/* yields scsi midlevel's access_count for this SCSI device */
+#define SG_GET_ACCESS_COUNT 0x2289  
+
+
+#define SG_SCATTER_SZ (8 * 4096)
+/* Largest size (in bytes) a single scatter-gather list element can have.
+   The value used by the driver is 'max(SG_SCATTER_SZ, PAGE_SIZE)'.
+   This value should be a power of 2 (and may be rounded up internally).
+   If scatter-gather is not supported by adapter then this value is the
+   largest data block that can be read/written by a single scsi command. */
+
+#define SG_DEFAULT_RETRIES 0
+
+/* Defaults, commented if they differ from original sg driver */
+#define SG_DEF_FORCE_PACK_ID 0
+#define SG_DEF_KEEP_ORPHAN 0
+#define SG_DEF_RESERVED_SIZE SG_SCATTER_SZ /* load time option */
+
+/* maximum outstanding requests, write() yields EDOM if exceeded */
+#define SG_MAX_QUEUE 16
+
+#define SG_BIG_BUFF SG_DEF_RESERVED_SIZE    /* for backward compatibility */
+
+/* Alternate style type names, "..._t" variants preferred */
+typedef struct sg_io_hdr Sg_io_hdr;
+typedef struct sg_io_vec Sg_io_vec;
+typedef struct sg_scsi_id Sg_scsi_id;
+typedef struct sg_req_info Sg_req_info;
+
+
+/* vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv */
+/*   The older SG interface based on the 'sg_header' structure follows.   */
+/* ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ */
+
+#define SG_MAX_SENSE 16   /* this only applies to the sg_header interface */
+
+struct sg_header
+{
+    int pack_len;    /* [o] reply_len (ie useless), ignored as input */
+    int reply_len;   /* [i] max length of expected reply (inc. sg_header) */
+    int pack_id;     /* [io] id number of packet (use ints >= 0) */
+    int result;      /* [o] 0==ok, else (+ve) Unix errno (best ignored) */
+    unsigned int twelve_byte:1;
+	/* [i] Force 12 byte command length for group 6 & 7 commands  */
+    unsigned int target_status:5;   /* [o] scsi status from target */
+    unsigned int host_status:8;     /* [o] host status (see "DID" codes) */
+    unsigned int driver_status:8;   /* [o] driver status+suggestion */
+    unsigned int other_flags:10;    /* unused */
+    unsigned char sense_buffer[SG_MAX_SENSE]; /* [o] Output in 3 cases:
+	   when target_status is CHECK_CONDITION or
+	   when target_status is COMMAND_TERMINATED or
+	   when (driver_status & DRIVER_SENSE) is true. */
+};      /* This structure is 36 bytes long on i386 */
+
+
+/* IOCTLs: The following are not required (or ignored) when the sg_io_hdr_t
+	   interface is used. They are kept for backward compatibility with
+	   the original and version 2 drivers. */
+
+#define SG_SET_TIMEOUT 0x2201  /* unit: jiffies (10ms on i386) */
+#define SG_GET_TIMEOUT 0x2202  /* yield timeout as _return_ value */
+
+/* Get/set command queuing state per fd (default is SG_DEF_COMMAND_Q.
+   Each time a sg_io_hdr_t object is seen on this file descriptor, this
+   command queuing flag is set on (overriding the previous setting). */
+#define SG_GET_COMMAND_Q 0x2270   /* Yields 0 (queuing off) or 1 (on) */
+#define SG_SET_COMMAND_Q 0x2271   /* Change queuing state with 0 or 1 */
+
+/* Turn on/off error sense trace (1 and 0 respectively, default is off).
+   Try using: "# cat /proc/scsi/sg/debug" instead in the v3 driver */
+#define SG_SET_DEBUG 0x227e    /* 0 -> turn off debug */
+
+#define SG_NEXT_CMD_LEN 0x2283  /* override SCSI command length with given
+		   number on the next write() on this file descriptor */
+
+
+/* Defaults, commented if they differ from original sg driver */
+#ifdef __KERNEL__
+#define SG_DEFAULT_TIMEOUT_USER	(60*USER_HZ) /* HZ == 'jiffies in 1 second' */
+#else
+#define SG_DEFAULT_TIMEOUT	(60*HZ)	     /* HZ == 'jiffies in 1 second' */
+#endif
+
+#define SG_DEF_COMMAND_Q 0     /* command queuing is always on when
+				  the new interface is used */
+#define SG_DEF_UNDERRUN_FLAG 0
+
+#endif