summaryrefslogtreecommitdiffstats
path: root/include/ufs/ufshci.h
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /include/ufs/ufshci.h
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'include/ufs/ufshci.h')
-rw-r--r--include/ufs/ufshci.h612
1 files changed, 612 insertions, 0 deletions
diff --git a/include/ufs/ufshci.h b/include/ufs/ufshci.h
new file mode 100644
index 0000000000..d5accacae6
--- /dev/null
+++ b/include/ufs/ufshci.h
@@ -0,0 +1,612 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Universal Flash Storage Host controller driver
+ * Copyright (C) 2011-2013 Samsung India Software Operations
+ *
+ * Authors:
+ * Santosh Yaraganavi <santosh.sy@samsung.com>
+ * Vinayak Holikatti <h.vinayak@samsung.com>
+ */
+
+#ifndef _UFSHCI_H
+#define _UFSHCI_H
+
+#include <linux/types.h>
+#include <ufs/ufs.h>
+
+enum {
+ TASK_REQ_UPIU_SIZE_DWORDS = 8,
+ TASK_RSP_UPIU_SIZE_DWORDS = 8,
+ ALIGNED_UPIU_SIZE = 512,
+};
+
+/* UFSHCI Registers */
+enum {
+ REG_CONTROLLER_CAPABILITIES = 0x00,
+ REG_MCQCAP = 0x04,
+ REG_UFS_VERSION = 0x08,
+ REG_CONTROLLER_DEV_ID = 0x10,
+ REG_CONTROLLER_PROD_ID = 0x14,
+ REG_AUTO_HIBERNATE_IDLE_TIMER = 0x18,
+ REG_INTERRUPT_STATUS = 0x20,
+ REG_INTERRUPT_ENABLE = 0x24,
+ REG_CONTROLLER_STATUS = 0x30,
+ REG_CONTROLLER_ENABLE = 0x34,
+ REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER = 0x38,
+ REG_UIC_ERROR_CODE_DATA_LINK_LAYER = 0x3C,
+ REG_UIC_ERROR_CODE_NETWORK_LAYER = 0x40,
+ REG_UIC_ERROR_CODE_TRANSPORT_LAYER = 0x44,
+ REG_UIC_ERROR_CODE_DME = 0x48,
+ REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL = 0x4C,
+ REG_UTP_TRANSFER_REQ_LIST_BASE_L = 0x50,
+ REG_UTP_TRANSFER_REQ_LIST_BASE_H = 0x54,
+ REG_UTP_TRANSFER_REQ_DOOR_BELL = 0x58,
+ REG_UTP_TRANSFER_REQ_LIST_CLEAR = 0x5C,
+ REG_UTP_TRANSFER_REQ_LIST_RUN_STOP = 0x60,
+ REG_UTP_TASK_REQ_LIST_BASE_L = 0x70,
+ REG_UTP_TASK_REQ_LIST_BASE_H = 0x74,
+ REG_UTP_TASK_REQ_DOOR_BELL = 0x78,
+ REG_UTP_TASK_REQ_LIST_CLEAR = 0x7C,
+ REG_UTP_TASK_REQ_LIST_RUN_STOP = 0x80,
+ REG_UIC_COMMAND = 0x90,
+ REG_UIC_COMMAND_ARG_1 = 0x94,
+ REG_UIC_COMMAND_ARG_2 = 0x98,
+ REG_UIC_COMMAND_ARG_3 = 0x9C,
+
+ UFSHCI_REG_SPACE_SIZE = 0xA0,
+
+ REG_UFS_CCAP = 0x100,
+ REG_UFS_CRYPTOCAP = 0x104,
+
+ REG_UFS_MEM_CFG = 0x300,
+ REG_UFS_MCQ_CFG = 0x380,
+ REG_UFS_ESILBA = 0x384,
+ REG_UFS_ESIUBA = 0x388,
+ UFSHCI_CRYPTO_REG_SPACE_SIZE = 0x400,
+};
+
+/* Controller capability masks */
+enum {
+ MASK_TRANSFER_REQUESTS_SLOTS = 0x0000001F,
+ MASK_TASK_MANAGEMENT_REQUEST_SLOTS = 0x00070000,
+ MASK_EHSLUTRD_SUPPORTED = 0x00400000,
+ MASK_AUTO_HIBERN8_SUPPORT = 0x00800000,
+ MASK_64_ADDRESSING_SUPPORT = 0x01000000,
+ MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT = 0x02000000,
+ MASK_UIC_DME_TEST_MODE_SUPPORT = 0x04000000,
+ MASK_CRYPTO_SUPPORT = 0x10000000,
+ MASK_MCQ_SUPPORT = 0x40000000,
+};
+
+/* MCQ capability mask */
+enum {
+ MASK_EXT_IID_SUPPORT = 0x00000400,
+};
+
+enum {
+ REG_SQATTR = 0x0,
+ REG_SQLBA = 0x4,
+ REG_SQUBA = 0x8,
+ REG_SQDAO = 0xC,
+ REG_SQISAO = 0x10,
+
+ REG_CQATTR = 0x20,
+ REG_CQLBA = 0x24,
+ REG_CQUBA = 0x28,
+ REG_CQDAO = 0x2C,
+ REG_CQISAO = 0x30,
+};
+
+enum {
+ REG_SQHP = 0x0,
+ REG_SQTP = 0x4,
+ REG_SQRTC = 0x8,
+ REG_SQCTI = 0xC,
+ REG_SQRTS = 0x10,
+};
+
+enum {
+ REG_CQHP = 0x0,
+ REG_CQTP = 0x4,
+};
+
+enum {
+ REG_CQIS = 0x0,
+ REG_CQIE = 0x4,
+};
+
+enum {
+ SQ_START = 0x0,
+ SQ_STOP = 0x1,
+ SQ_ICU = 0x2,
+};
+
+enum {
+ SQ_STS = 0x1,
+ SQ_CUS = 0x2,
+};
+
+#define SQ_ICU_ERR_CODE_MASK GENMASK(7, 4)
+#define UFS_MASK(mask, offset) ((mask) << (offset))
+
+/* UFS Version 08h */
+#define MINOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 0)
+#define MAJOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 16)
+
+#define UFSHCD_NUM_RESERVED 1
+/*
+ * Controller UFSHCI version
+ * - 2.x and newer use the following scheme:
+ * major << 8 + minor << 4
+ * - 1.x has been converted to match this in
+ * ufshcd_get_ufs_version()
+ */
+static inline u32 ufshci_version(u32 major, u32 minor)
+{
+ return (major << 8) + (minor << 4);
+}
+
+/*
+ * HCDDID - Host Controller Identification Descriptor
+ * - Device ID and Device Class 10h
+ */
+#define DEVICE_CLASS UFS_MASK(0xFFFF, 0)
+#define DEVICE_ID UFS_MASK(0xFF, 24)
+
+/*
+ * HCPMID - Host Controller Identification Descriptor
+ * - Product/Manufacturer ID 14h
+ */
+#define MANUFACTURE_ID_MASK UFS_MASK(0xFFFF, 0)
+#define PRODUCT_ID_MASK UFS_MASK(0xFFFF, 16)
+
+/* AHIT - Auto-Hibernate Idle Timer */
+#define UFSHCI_AHIBERN8_TIMER_MASK GENMASK(9, 0)
+#define UFSHCI_AHIBERN8_SCALE_MASK GENMASK(12, 10)
+#define UFSHCI_AHIBERN8_SCALE_FACTOR 10
+#define UFSHCI_AHIBERN8_MAX (1023 * 100000)
+
+/*
+ * IS - Interrupt Status - 20h
+ */
+#define UTP_TRANSFER_REQ_COMPL 0x1
+#define UIC_DME_END_PT_RESET 0x2
+#define UIC_ERROR 0x4
+#define UIC_TEST_MODE 0x8
+#define UIC_POWER_MODE 0x10
+#define UIC_HIBERNATE_EXIT 0x20
+#define UIC_HIBERNATE_ENTER 0x40
+#define UIC_LINK_LOST 0x80
+#define UIC_LINK_STARTUP 0x100
+#define UTP_TASK_REQ_COMPL 0x200
+#define UIC_COMMAND_COMPL 0x400
+#define DEVICE_FATAL_ERROR 0x800
+#define CONTROLLER_FATAL_ERROR 0x10000
+#define SYSTEM_BUS_FATAL_ERROR 0x20000
+#define CRYPTO_ENGINE_FATAL_ERROR 0x40000
+#define MCQ_CQ_EVENT_STATUS 0x100000
+
+#define UFSHCD_UIC_HIBERN8_MASK (UIC_HIBERNATE_ENTER |\
+ UIC_HIBERNATE_EXIT)
+
+#define UFSHCD_UIC_PWR_MASK (UFSHCD_UIC_HIBERN8_MASK |\
+ UIC_POWER_MODE)
+
+#define UFSHCD_UIC_MASK (UIC_COMMAND_COMPL | UFSHCD_UIC_PWR_MASK)
+
+#define UFSHCD_ERROR_MASK (UIC_ERROR | INT_FATAL_ERRORS)
+
+#define INT_FATAL_ERRORS (DEVICE_FATAL_ERROR |\
+ CONTROLLER_FATAL_ERROR |\
+ SYSTEM_BUS_FATAL_ERROR |\
+ CRYPTO_ENGINE_FATAL_ERROR |\
+ UIC_LINK_LOST)
+
+/* HCS - Host Controller Status 30h */
+#define DEVICE_PRESENT 0x1
+#define UTP_TRANSFER_REQ_LIST_READY 0x2
+#define UTP_TASK_REQ_LIST_READY 0x4
+#define UIC_COMMAND_READY 0x8
+#define HOST_ERROR_INDICATOR 0x10
+#define DEVICE_ERROR_INDICATOR 0x20
+#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK UFS_MASK(0x7, 8)
+
+#define UFSHCD_STATUS_READY (UTP_TRANSFER_REQ_LIST_READY |\
+ UTP_TASK_REQ_LIST_READY |\
+ UIC_COMMAND_READY)
+
+enum {
+ PWR_OK = 0x0,
+ PWR_LOCAL = 0x01,
+ PWR_REMOTE = 0x02,
+ PWR_BUSY = 0x03,
+ PWR_ERROR_CAP = 0x04,
+ PWR_FATAL_ERROR = 0x05,
+};
+
+/* HCE - Host Controller Enable 34h */
+#define CONTROLLER_ENABLE 0x1
+#define CONTROLLER_DISABLE 0x0
+#define CRYPTO_GENERAL_ENABLE 0x2
+
+/* UECPA - Host UIC Error Code PHY Adapter Layer 38h */
+#define UIC_PHY_ADAPTER_LAYER_ERROR 0x80000000
+#define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK 0x1F
+#define UIC_PHY_ADAPTER_LAYER_LANE_ERR_MASK 0xF
+#define UIC_PHY_ADAPTER_LAYER_GENERIC_ERROR 0x10
+
+/* UECDL - Host UIC Error Code Data Link Layer 3Ch */
+#define UIC_DATA_LINK_LAYER_ERROR 0x80000000
+#define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK 0xFFFF
+#define UIC_DATA_LINK_LAYER_ERROR_TCX_REP_TIMER_EXP 0x2
+#define UIC_DATA_LINK_LAYER_ERROR_AFCX_REQ_TIMER_EXP 0x4
+#define UIC_DATA_LINK_LAYER_ERROR_FCX_PRO_TIMER_EXP 0x8
+#define UIC_DATA_LINK_LAYER_ERROR_RX_BUF_OF 0x20
+#define UIC_DATA_LINK_LAYER_ERROR_PA_INIT 0x2000
+#define UIC_DATA_LINK_LAYER_ERROR_NAC_RECEIVED 0x0001
+#define UIC_DATA_LINK_LAYER_ERROR_TCx_REPLAY_TIMEOUT 0x0002
+
+/* UECN - Host UIC Error Code Network Layer 40h */
+#define UIC_NETWORK_LAYER_ERROR 0x80000000
+#define UIC_NETWORK_LAYER_ERROR_CODE_MASK 0x7
+#define UIC_NETWORK_UNSUPPORTED_HEADER_TYPE 0x1
+#define UIC_NETWORK_BAD_DEVICEID_ENC 0x2
+#define UIC_NETWORK_LHDR_TRAP_PACKET_DROPPING 0x4
+
+/* UECT - Host UIC Error Code Transport Layer 44h */
+#define UIC_TRANSPORT_LAYER_ERROR 0x80000000
+#define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK 0x7F
+#define UIC_TRANSPORT_UNSUPPORTED_HEADER_TYPE 0x1
+#define UIC_TRANSPORT_UNKNOWN_CPORTID 0x2
+#define UIC_TRANSPORT_NO_CONNECTION_RX 0x4
+#define UIC_TRANSPORT_CONTROLLED_SEGMENT_DROPPING 0x8
+#define UIC_TRANSPORT_BAD_TC 0x10
+#define UIC_TRANSPORT_E2E_CREDIT_OVERFOW 0x20
+#define UIC_TRANSPORT_SAFETY_VALUE_DROPPING 0x40
+
+/* UECDME - Host UIC Error Code DME 48h */
+#define UIC_DME_ERROR 0x80000000
+#define UIC_DME_ERROR_CODE_MASK 0x1
+
+/* UTRIACR - Interrupt Aggregation control register - 0x4Ch */
+#define INT_AGGR_TIMEOUT_VAL_MASK 0xFF
+#define INT_AGGR_COUNTER_THRESHOLD_MASK UFS_MASK(0x1F, 8)
+#define INT_AGGR_COUNTER_AND_TIMER_RESET 0x10000
+#define INT_AGGR_STATUS_BIT 0x100000
+#define INT_AGGR_PARAM_WRITE 0x1000000
+#define INT_AGGR_ENABLE 0x80000000
+
+/* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */
+#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT 0x1
+
+/* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */
+#define UTP_TASK_REQ_LIST_RUN_STOP_BIT 0x1
+
+/* CQISy - CQ y Interrupt Status Register */
+#define UFSHCD_MCQ_CQIS_TAIL_ENT_PUSH_STS 0x1
+
+/* UICCMD - UIC Command */
+#define COMMAND_OPCODE_MASK 0xFF
+#define GEN_SELECTOR_INDEX_MASK 0xFFFF
+
+#define MIB_ATTRIBUTE_MASK UFS_MASK(0xFFFF, 16)
+#define RESET_LEVEL 0xFF
+
+#define ATTR_SET_TYPE_MASK UFS_MASK(0xFF, 16)
+#define CONFIG_RESULT_CODE_MASK 0xFF
+#define GENERIC_ERROR_CODE_MASK 0xFF
+
+/* GenSelectorIndex calculation macros for M-PHY attributes */
+#define UIC_ARG_MPHY_TX_GEN_SEL_INDEX(lane) (lane)
+#define UIC_ARG_MPHY_RX_GEN_SEL_INDEX(lane) (PA_MAXDATALANES + (lane))
+
+#define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
+ ((sel) & 0xFFFF))
+#define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0)
+#define UIC_ARG_ATTR_TYPE(t) (((t) & 0xFF) << 16)
+#define UIC_GET_ATTR_ID(v) (((v) >> 16) & 0xFFFF)
+
+/* Link Status*/
+enum link_status {
+ UFSHCD_LINK_IS_DOWN = 1,
+ UFSHCD_LINK_IS_UP = 2,
+};
+
+/* UIC Commands */
+enum uic_cmd_dme {
+ UIC_CMD_DME_GET = 0x01,
+ UIC_CMD_DME_SET = 0x02,
+ UIC_CMD_DME_PEER_GET = 0x03,
+ UIC_CMD_DME_PEER_SET = 0x04,
+ UIC_CMD_DME_POWERON = 0x10,
+ UIC_CMD_DME_POWEROFF = 0x11,
+ UIC_CMD_DME_ENABLE = 0x12,
+ UIC_CMD_DME_RESET = 0x14,
+ UIC_CMD_DME_END_PT_RST = 0x15,
+ UIC_CMD_DME_LINK_STARTUP = 0x16,
+ UIC_CMD_DME_HIBER_ENTER = 0x17,
+ UIC_CMD_DME_HIBER_EXIT = 0x18,
+ UIC_CMD_DME_TEST_MODE = 0x1A,
+};
+
+/* UIC Config result code / Generic error code */
+enum {
+ UIC_CMD_RESULT_SUCCESS = 0x00,
+ UIC_CMD_RESULT_INVALID_ATTR = 0x01,
+ UIC_CMD_RESULT_FAILURE = 0x01,
+ UIC_CMD_RESULT_INVALID_ATTR_VALUE = 0x02,
+ UIC_CMD_RESULT_READ_ONLY_ATTR = 0x03,
+ UIC_CMD_RESULT_WRITE_ONLY_ATTR = 0x04,
+ UIC_CMD_RESULT_BAD_INDEX = 0x05,
+ UIC_CMD_RESULT_LOCKED_ATTR = 0x06,
+ UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX = 0x07,
+ UIC_CMD_RESULT_PEER_COMM_FAILURE = 0x08,
+ UIC_CMD_RESULT_BUSY = 0x09,
+ UIC_CMD_RESULT_DME_FAILURE = 0x0A,
+};
+
+#define MASK_UIC_COMMAND_RESULT 0xFF
+
+#define INT_AGGR_COUNTER_THLD_VAL(c) (((c) & 0x1F) << 8)
+#define INT_AGGR_TIMEOUT_VAL(t) (((t) & 0xFF) << 0)
+
+/* Interrupt disable masks */
+enum {
+ /* Interrupt disable mask for UFSHCI v1.0 */
+ INTERRUPT_MASK_ALL_VER_10 = 0x30FFF,
+ INTERRUPT_MASK_RW_VER_10 = 0x30000,
+
+ /* Interrupt disable mask for UFSHCI v1.1 */
+ INTERRUPT_MASK_ALL_VER_11 = 0x31FFF,
+
+ /* Interrupt disable mask for UFSHCI v2.1 */
+ INTERRUPT_MASK_ALL_VER_21 = 0x71FFF,
+};
+
+/* CCAP - Crypto Capability 100h */
+union ufs_crypto_capabilities {
+ __le32 reg_val;
+ struct {
+ u8 num_crypto_cap;
+ u8 config_count;
+ u8 reserved;
+ u8 config_array_ptr;
+ };
+};
+
+enum ufs_crypto_key_size {
+ UFS_CRYPTO_KEY_SIZE_INVALID = 0x0,
+ UFS_CRYPTO_KEY_SIZE_128 = 0x1,
+ UFS_CRYPTO_KEY_SIZE_192 = 0x2,
+ UFS_CRYPTO_KEY_SIZE_256 = 0x3,
+ UFS_CRYPTO_KEY_SIZE_512 = 0x4,
+};
+
+enum ufs_crypto_alg {
+ UFS_CRYPTO_ALG_AES_XTS = 0x0,
+ UFS_CRYPTO_ALG_BITLOCKER_AES_CBC = 0x1,
+ UFS_CRYPTO_ALG_AES_ECB = 0x2,
+ UFS_CRYPTO_ALG_ESSIV_AES_CBC = 0x3,
+};
+
+/* x-CRYPTOCAP - Crypto Capability X */
+union ufs_crypto_cap_entry {
+ __le32 reg_val;
+ struct {
+ u8 algorithm_id;
+ u8 sdus_mask; /* Supported data unit size mask */
+ u8 key_size;
+ u8 reserved;
+ };
+};
+
+#define UFS_CRYPTO_CONFIGURATION_ENABLE (1 << 7)
+#define UFS_CRYPTO_KEY_MAX_SIZE 64
+/* x-CRYPTOCFG - Crypto Configuration X */
+union ufs_crypto_cfg_entry {
+ __le32 reg_val[32];
+ struct {
+ u8 crypto_key[UFS_CRYPTO_KEY_MAX_SIZE];
+ u8 data_unit_size;
+ u8 crypto_cap_idx;
+ u8 reserved_1;
+ u8 config_enable;
+ u8 reserved_multi_host;
+ u8 reserved_2;
+ u8 vsb[2];
+ u8 reserved_3[56];
+ };
+};
+
+/*
+ * Request Descriptor Definitions
+ */
+
+/* Transfer request command type */
+enum {
+ UTP_CMD_TYPE_SCSI = 0x0,
+ UTP_CMD_TYPE_UFS = 0x1,
+ UTP_CMD_TYPE_DEV_MANAGE = 0x2,
+};
+
+/* To accommodate UFS2.0 required Command type */
+enum {
+ UTP_CMD_TYPE_UFS_STORAGE = 0x1,
+};
+
+enum {
+ UTP_SCSI_COMMAND = 0x00000000,
+ UTP_NATIVE_UFS_COMMAND = 0x10000000,
+ UTP_DEVICE_MANAGEMENT_FUNCTION = 0x20000000,
+};
+
+/* UTP Transfer Request Data Direction (DD) */
+enum utp_data_direction {
+ UTP_NO_DATA_TRANSFER = 0,
+ UTP_HOST_TO_DEVICE = 1,
+ UTP_DEVICE_TO_HOST = 2,
+};
+
+/* Overall command status values */
+enum utp_ocs {
+ OCS_SUCCESS = 0x0,
+ OCS_INVALID_CMD_TABLE_ATTR = 0x1,
+ OCS_INVALID_PRDT_ATTR = 0x2,
+ OCS_MISMATCH_DATA_BUF_SIZE = 0x3,
+ OCS_MISMATCH_RESP_UPIU_SIZE = 0x4,
+ OCS_PEER_COMM_FAILURE = 0x5,
+ OCS_ABORTED = 0x6,
+ OCS_FATAL_ERROR = 0x7,
+ OCS_DEVICE_FATAL_ERROR = 0x8,
+ OCS_INVALID_CRYPTO_CONFIG = 0x9,
+ OCS_GENERAL_CRYPTO_ERROR = 0xA,
+ OCS_INVALID_COMMAND_STATUS = 0x0F,
+};
+
+enum {
+ MASK_OCS = 0x0F,
+};
+
+/* The maximum length of the data byte count field in the PRDT is 256KB */
+#define PRDT_DATA_BYTE_COUNT_MAX SZ_256K
+/* The granularity of the data byte count field in the PRDT is 32-bit */
+#define PRDT_DATA_BYTE_COUNT_PAD 4
+
+/**
+ * struct ufshcd_sg_entry - UFSHCI PRD Entry
+ * @addr: Physical address; DW-0 and DW-1.
+ * @reserved: Reserved for future use DW-2
+ * @size: size of physical segment DW-3
+ */
+struct ufshcd_sg_entry {
+ __le64 addr;
+ __le32 reserved;
+ __le32 size;
+ /*
+ * followed by variant-specific fields if
+ * CONFIG_SCSI_UFS_VARIABLE_SG_ENTRY_SIZE has been defined.
+ */
+};
+
+/**
+ * struct utp_transfer_cmd_desc - UTP Command Descriptor (UCD)
+ * @command_upiu: Command UPIU Frame address
+ * @response_upiu: Response UPIU Frame address
+ * @prd_table: Physical Region Descriptor: an array of SG_ALL struct
+ * ufshcd_sg_entry's. Variant-specific fields may be present after each.
+ */
+struct utp_transfer_cmd_desc {
+ u8 command_upiu[ALIGNED_UPIU_SIZE];
+ u8 response_upiu[ALIGNED_UPIU_SIZE];
+ u8 prd_table[];
+};
+
+/**
+ * struct request_desc_header - Descriptor Header common to both UTRD and UTMRD
+ */
+struct request_desc_header {
+ u8 cci;
+ u8 ehs_length;
+#if defined(__BIG_ENDIAN)
+ u8 enable_crypto:1;
+ u8 reserved2:7;
+
+ u8 command_type:4;
+ u8 reserved1:1;
+ u8 data_direction:2;
+ u8 interrupt:1;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved2:7;
+ u8 enable_crypto:1;
+
+ u8 interrupt:1;
+ u8 data_direction:2;
+ u8 reserved1:1;
+ u8 command_type:4;
+#else
+#error
+#endif
+
+ __le32 dunl;
+ u8 ocs;
+ u8 cds;
+ __le16 ldbc;
+ __le32 dunu;
+};
+
+static_assert(sizeof(struct request_desc_header) == 16);
+
+/**
+ * struct utp_transfer_req_desc - UTP Transfer Request Descriptor (UTRD)
+ * @header: UTRD header DW-0 to DW-3
+ * @command_desc_base_addr: UCD base address DW 4-5
+ * @response_upiu_length: response UPIU length DW-6
+ * @response_upiu_offset: response UPIU offset DW-6
+ * @prd_table_length: Physical region descriptor length DW-7
+ * @prd_table_offset: Physical region descriptor offset DW-7
+ */
+struct utp_transfer_req_desc {
+
+ /* DW 0-3 */
+ struct request_desc_header header;
+
+ /* DW 4-5*/
+ __le64 command_desc_base_addr;
+
+ /* DW 6 */
+ __le16 response_upiu_length;
+ __le16 response_upiu_offset;
+
+ /* DW 7 */
+ __le16 prd_table_length;
+ __le16 prd_table_offset;
+};
+
+/* MCQ Completion Queue Entry */
+struct cq_entry {
+ /* DW 0-1 */
+ __le64 command_desc_base_addr;
+
+ /* DW 2 */
+ __le16 response_upiu_length;
+ __le16 response_upiu_offset;
+
+ /* DW 3 */
+ __le16 prd_table_length;
+ __le16 prd_table_offset;
+
+ /* DW 4 */
+ __le32 status;
+
+ /* DW 5-7 */
+ __le32 reserved[3];
+};
+
+static_assert(sizeof(struct cq_entry) == 32);
+
+/*
+ * UTMRD structure.
+ */
+struct utp_task_req_desc {
+ /* DW 0-3 */
+ struct request_desc_header header;
+
+ /* DW 4-11 - Task request UPIU structure */
+ struct {
+ struct utp_upiu_header req_header;
+ __be32 input_param1;
+ __be32 input_param2;
+ __be32 input_param3;
+ __be32 __reserved1[2];
+ } upiu_req;
+
+ /* DW 12-19 - Task Management Response UPIU structure */
+ struct {
+ struct utp_upiu_header rsp_header;
+ __be32 output_param1;
+ __be32 output_param2;
+ __be32 __reserved2[3];
+ } upiu_rsp;
+};
+
+#endif /* End of Header */