Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 286 insertions, 0 deletions

diff --git a/mm/Kconfig.debug b/mm/Kconfig.debug
new file mode 100644
index 0000000000..018a5bd2f5
--- /dev/null
+++ b/mm/Kconfig.debug
@@ -0,0 +1,286 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config PAGE_EXTENSION
+	bool "Extend memmap on extra space for more information on page"
+	help
+	  Extend memmap on extra space for more information on page. This
+	  could be used for debugging features that need to insert extra
+	  field for every page. This extension enables us to save memory
+	  by not allocating this extra memory according to boottime
+	  configuration.
+
+config DEBUG_PAGEALLOC
+	bool "Debug page memory allocations"
+	depends on DEBUG_KERNEL
+	depends on !HIBERNATION || ARCH_SUPPORTS_DEBUG_PAGEALLOC && !PPC && !SPARC
+	select PAGE_POISONING if !ARCH_SUPPORTS_DEBUG_PAGEALLOC
+	help
+	  Unmap pages from the kernel linear mapping after free_pages().
+	  Depending on runtime enablement, this results in a small or large
+	  slowdown, but helps to find certain types of memory corruption.
+
+	  Also, the state of page tracking structures is checked more often as
+	  pages are being allocated and freed, as unexpected state changes
+	  often happen for same reasons as memory corruption (e.g. double free,
+	  use-after-free). The error reports for these checks can be augmented
+	  with stack traces of last allocation and freeing of the page, when
+	  PAGE_OWNER is also selected and enabled on boot.
+
+	  For architectures which don't enable ARCH_SUPPORTS_DEBUG_PAGEALLOC,
+	  fill the pages with poison patterns after free_pages() and verify
+	  the patterns before alloc_pages(). Additionally, this option cannot
+	  be enabled in combination with hibernation as that would result in
+	  incorrect warnings of memory corruption after a resume because free
+	  pages are not saved to the suspend image.
+
+	  By default this option will have a small overhead, e.g. by not
+	  allowing the kernel mapping to be backed by large pages on some
+	  architectures. Even bigger overhead comes when the debugging is
+	  enabled by DEBUG_PAGEALLOC_ENABLE_DEFAULT or the debug_pagealloc
+	  command line parameter.
+
+config DEBUG_PAGEALLOC_ENABLE_DEFAULT
+	bool "Enable debug page memory allocations by default?"
+	depends on DEBUG_PAGEALLOC
+	help
+	  Enable debug page memory allocations by default? This value
+	  can be overridden by debug_pagealloc=off|on.
+
+config DEBUG_SLAB
+	bool "Debug slab memory allocations"
+	depends on DEBUG_KERNEL && SLAB
+	help
+	  Say Y here to have the kernel do limited verification on memory
+	  allocation as well as poisoning memory on free to catch use of freed
+	  memory. This can make kmalloc/kfree-intensive workloads much slower.
+
+config SLUB_DEBUG
+	default y
+	bool "Enable SLUB debugging support" if EXPERT
+	depends on SLUB && SYSFS && !SLUB_TINY
+	select STACKDEPOT if STACKTRACE_SUPPORT
+	help
+	  SLUB has extensive debug support features. Disabling these can
+	  result in significant savings in code size. While /sys/kernel/slab
+	  will still exist (with SYSFS enabled), it will not provide e.g. cache
+	  validation.
+
+config SLUB_DEBUG_ON
+	bool "SLUB debugging on by default"
+	depends on SLUB && SLUB_DEBUG
+	select STACKDEPOT_ALWAYS_INIT if STACKTRACE_SUPPORT
+	default n
+	help
+	  Boot with debugging on by default. SLUB boots by default with
+	  the runtime debug capabilities switched off. Enabling this is
+	  equivalent to specifying the "slub_debug" parameter on boot.
+	  There is no support for more fine grained debug control like
+	  possible with slub_debug=xxx. SLUB debugging may be switched
+	  off in a kernel built with CONFIG_SLUB_DEBUG_ON by specifying
+	  "slub_debug=-".
+
+config PAGE_OWNER
+	bool "Track page owner"
+	depends on DEBUG_KERNEL && STACKTRACE_SUPPORT
+	select DEBUG_FS
+	select STACKTRACE
+	select STACKDEPOT
+	select PAGE_EXTENSION
+	help
+	  This keeps track of what call chain is the owner of a page, may
+	  help to find bare alloc_page(s) leaks. Even if you include this
+	  feature on your build, it is disabled in default. You should pass
+	  "page_owner=on" to boot parameter in order to enable it. Eats
+	  a fair amount of memory if enabled. See tools/mm/page_owner_sort.c
+	  for user-space helper.
+
+	  If unsure, say N.
+
+config PAGE_TABLE_CHECK
+	bool "Check for invalid mappings in user page tables"
+	depends on ARCH_SUPPORTS_PAGE_TABLE_CHECK
+	depends on EXCLUSIVE_SYSTEM_RAM
+	select PAGE_EXTENSION
+	help
+	  Check that anonymous page is not being mapped twice with read write
+	  permissions. Check that anonymous and file pages are not being
+	  erroneously shared. Since the checking is performed at the time
+	  entries are added and removed to user page tables, leaking, corruption
+	  and double mapping problems are detected synchronously.
+
+	  If unsure say "n".
+
+config PAGE_TABLE_CHECK_ENFORCED
+	bool "Enforce the page table checking by default"
+	depends on PAGE_TABLE_CHECK
+	help
+	  Always enable page table checking.  By default the page table checking
+	  is disabled, and can be optionally enabled via page_table_check=on
+	  kernel parameter. This config enforces that page table check is always
+	  enabled.
+
+	  If unsure say "n".
+
+config PAGE_POISONING
+	bool "Poison pages after freeing"
+	help
+	  Fill the pages with poison patterns after free_pages() and verify
+	  the patterns before alloc_pages. The filling of the memory helps
+	  reduce the risk of information leaks from freed data. This does
+	  have a potential performance impact if enabled with the
+	  "page_poison=1" kernel boot option.
+
+	  Note that "poison" here is not the same thing as the "HWPoison"
+	  for CONFIG_MEMORY_FAILURE. This is software poisoning only.
+
+	  If you are only interested in sanitization of freed pages without
+	  checking the poison pattern on alloc, you can boot the kernel with
+	  "init_on_free=1" instead of enabling this.
+
+	  If unsure, say N
+
+config DEBUG_PAGE_REF
+	bool "Enable tracepoint to track down page reference manipulation"
+	depends on DEBUG_KERNEL
+	depends on TRACEPOINTS
+	help
+	  This is a feature to add tracepoint for tracking down page reference
+	  manipulation. This tracking is useful to diagnose functional failure
+	  due to migration failures caused by page reference mismatches.  Be
+	  careful when enabling this feature because it adds about 30 KB to the
+	  kernel code.  However the runtime performance overhead is virtually
+	  nil until the tracepoints are actually enabled.
+
+config DEBUG_RODATA_TEST
+    bool "Testcase for the marking rodata read-only"
+    depends on STRICT_KERNEL_RWX
+	help
+      This option enables a testcase for the setting rodata read-only.
+
+config ARCH_HAS_DEBUG_WX
+	bool
+
+config DEBUG_WX
+	bool "Warn on W+X mappings at boot"
+	depends on ARCH_HAS_DEBUG_WX
+	depends on MMU
+	select PTDUMP_CORE
+	help
+	  Generate a warning if any W+X mappings are found at boot.
+
+	  This is useful for discovering cases where the kernel is leaving W+X
+	  mappings after applying NX, as such mappings are a security risk.
+
+	  Look for a message in dmesg output like this:
+
+	    <arch>/mm: Checked W+X mappings: passed, no W+X pages found.
+
+	  or like this, if the check failed:
+
+	    <arch>/mm: Checked W+X mappings: failed, <N> W+X pages found.
+
+	  Note that even if the check fails, your kernel is possibly
+	  still fine, as W+X mappings are not a security hole in
+	  themselves, what they do is that they make the exploitation
+	  of other unfixed kernel bugs easier.
+
+	  There is no runtime or memory usage effect of this option
+	  once the kernel has booted up - it's a one time check.
+
+	  If in doubt, say "Y".
+
+config GENERIC_PTDUMP
+	bool
+
+config PTDUMP_CORE
+	bool
+
+config PTDUMP_DEBUGFS
+	bool "Export kernel pagetable layout to userspace via debugfs"
+	depends on DEBUG_KERNEL
+	depends on DEBUG_FS
+	depends on GENERIC_PTDUMP
+	select PTDUMP_CORE
+	help
+	  Say Y here if you want to show the kernel pagetable layout in a
+	  debugfs file. This information is only useful for kernel developers
+	  who are working in architecture specific areas of the kernel.
+	  It is probably not a good idea to enable this feature in a production
+	  kernel.
+
+	  If in doubt, say N.
+
+config HAVE_DEBUG_KMEMLEAK
+	bool
+
+config DEBUG_KMEMLEAK
+	bool "Kernel memory leak detector"
+	depends on DEBUG_KERNEL && HAVE_DEBUG_KMEMLEAK
+	select DEBUG_FS
+	select STACKTRACE if STACKTRACE_SUPPORT
+	select KALLSYMS
+	select CRC32
+	select STACKDEPOT
+	select STACKDEPOT_ALWAYS_INIT if !DEBUG_KMEMLEAK_DEFAULT_OFF
+	help
+	  Say Y here if you want to enable the memory leak
+	  detector. The memory allocation/freeing is traced in a way
+	  similar to the Boehm's conservative garbage collector, the
+	  difference being that the orphan objects are not freed but
+	  only shown in /sys/kernel/debug/kmemleak. Enabling this
+	  feature will introduce an overhead to memory
+	  allocations. See Documentation/dev-tools/kmemleak.rst for more
+	  details.
+
+	  Enabling DEBUG_SLAB or SLUB_DEBUG may increase the chances
+	  of finding leaks due to the slab objects poisoning.
+
+	  In order to access the kmemleak file, debugfs needs to be
+	  mounted (usually at /sys/kernel/debug).
+
+config DEBUG_KMEMLEAK_MEM_POOL_SIZE
+	int "Kmemleak memory pool size"
+	depends on DEBUG_KMEMLEAK
+	range 200 1000000
+	default 16000
+	help
+	  Kmemleak must track all the memory allocations to avoid
+	  reporting false positives. Since memory may be allocated or
+	  freed before kmemleak is fully initialised, use a static pool
+	  of metadata objects to track such callbacks. After kmemleak is
+	  fully initialised, this memory pool acts as an emergency one
+	  if slab allocations fail.
+
+config DEBUG_KMEMLEAK_DEFAULT_OFF
+	bool "Default kmemleak to off"
+	depends on DEBUG_KMEMLEAK
+	help
+	  Say Y here to disable kmemleak by default. It can then be enabled
+	  on the command line via kmemleak=on.
+
+config DEBUG_KMEMLEAK_AUTO_SCAN
+	bool "Enable kmemleak auto scan thread on boot up"
+	default y
+	depends on DEBUG_KMEMLEAK
+	help
+	  Depending on the cpu, kmemleak scan may be cpu intensive and can
+	  stall user tasks at times. This option enables/disables automatic
+	  kmemleak scan at boot up.
+
+	  Say N here to disable kmemleak auto scan thread to stop automatic
+	  scanning. Disabling this option disables automatic reporting of
+	  memory leaks.
+
+	  If unsure, say Y.
+
+config PER_VMA_LOCK_STATS
+	bool "Statistics for per-vma locks"
+	depends on PER_VMA_LOCK
+	help
+	  Say Y here to enable success, retry and failure counters of page
+	  faults handled under protection of per-vma locks. When enabled, the
+	  counters are exposed in /proc/vmstat. This information is useful for
+	  kernel developers to evaluate effectiveness of per-vma locks and to
+	  identify pathological cases. Counting these events introduces a small
+	  overhead in the page fault path.
+
+	  If in doubt, say N.