summaryrefslogtreecommitdiffstats
path: root/mm/Kconfig
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /mm/Kconfig
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'mm/Kconfig')
-rw-r--r--mm/Kconfig1263
1 files changed, 1263 insertions, 0 deletions
diff --git a/mm/Kconfig b/mm/Kconfig
new file mode 100644
index 0000000000..264a2df5ec
--- /dev/null
+++ b/mm/Kconfig
@@ -0,0 +1,1263 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+menu "Memory Management options"
+
+#
+# For some reason microblaze and nios2 hard code SWAP=n. Hopefully we can
+# add proper SWAP support to them, in which case this can be remove.
+#
+config ARCH_NO_SWAP
+ bool
+
+config ZPOOL
+ bool
+
+menuconfig SWAP
+ bool "Support for paging of anonymous memory (swap)"
+ depends on MMU && BLOCK && !ARCH_NO_SWAP
+ default y
+ help
+ This option allows you to choose whether you want to have support
+ for so called swap devices or swap files in your kernel that are
+ used to provide more virtual memory than the actual RAM present
+ in your computer. If unsure say Y.
+
+config ZSWAP
+ bool "Compressed cache for swap pages"
+ depends on SWAP
+ select CRYPTO
+ select ZPOOL
+ help
+ A lightweight compressed cache for swap pages. It takes
+ pages that are in the process of being swapped out and attempts to
+ compress them into a dynamically allocated RAM-based memory pool.
+ This can result in a significant I/O reduction on swap device and,
+ in the case where decompressing from RAM is faster than swap device
+ reads, can also improve workload performance.
+
+config ZSWAP_DEFAULT_ON
+ bool "Enable the compressed cache for swap pages by default"
+ depends on ZSWAP
+ help
+ If selected, the compressed cache for swap pages will be enabled
+ at boot, otherwise it will be disabled.
+
+ The selection made here can be overridden by using the kernel
+ command line 'zswap.enabled=' option.
+
+config ZSWAP_EXCLUSIVE_LOADS_DEFAULT_ON
+ bool "Invalidate zswap entries when pages are loaded"
+ depends on ZSWAP
+ help
+ If selected, exclusive loads for zswap will be enabled at boot,
+ otherwise it will be disabled.
+
+ If exclusive loads are enabled, when a page is loaded from zswap,
+ the zswap entry is invalidated at once, as opposed to leaving it
+ in zswap until the swap entry is freed.
+
+ This avoids having two copies of the same page in memory
+ (compressed and uncompressed) after faulting in a page from zswap.
+ The cost is that if the page was never dirtied and needs to be
+ swapped out again, it will be re-compressed.
+
+choice
+ prompt "Default compressor"
+ depends on ZSWAP
+ default ZSWAP_COMPRESSOR_DEFAULT_LZO
+ help
+ Selects the default compression algorithm for the compressed cache
+ for swap pages.
+
+ For an overview what kind of performance can be expected from
+ a particular compression algorithm please refer to the benchmarks
+ available at the following LWN page:
+ https://lwn.net/Articles/751795/
+
+ If in doubt, select 'LZO'.
+
+ The selection made here can be overridden by using the kernel
+ command line 'zswap.compressor=' option.
+
+config ZSWAP_COMPRESSOR_DEFAULT_DEFLATE
+ bool "Deflate"
+ select CRYPTO_DEFLATE
+ help
+ Use the Deflate algorithm as the default compression algorithm.
+
+config ZSWAP_COMPRESSOR_DEFAULT_LZO
+ bool "LZO"
+ select CRYPTO_LZO
+ help
+ Use the LZO algorithm as the default compression algorithm.
+
+config ZSWAP_COMPRESSOR_DEFAULT_842
+ bool "842"
+ select CRYPTO_842
+ help
+ Use the 842 algorithm as the default compression algorithm.
+
+config ZSWAP_COMPRESSOR_DEFAULT_LZ4
+ bool "LZ4"
+ select CRYPTO_LZ4
+ help
+ Use the LZ4 algorithm as the default compression algorithm.
+
+config ZSWAP_COMPRESSOR_DEFAULT_LZ4HC
+ bool "LZ4HC"
+ select CRYPTO_LZ4HC
+ help
+ Use the LZ4HC algorithm as the default compression algorithm.
+
+config ZSWAP_COMPRESSOR_DEFAULT_ZSTD
+ bool "zstd"
+ select CRYPTO_ZSTD
+ help
+ Use the zstd algorithm as the default compression algorithm.
+endchoice
+
+config ZSWAP_COMPRESSOR_DEFAULT
+ string
+ depends on ZSWAP
+ default "deflate" if ZSWAP_COMPRESSOR_DEFAULT_DEFLATE
+ default "lzo" if ZSWAP_COMPRESSOR_DEFAULT_LZO
+ default "842" if ZSWAP_COMPRESSOR_DEFAULT_842
+ default "lz4" if ZSWAP_COMPRESSOR_DEFAULT_LZ4
+ default "lz4hc" if ZSWAP_COMPRESSOR_DEFAULT_LZ4HC
+ default "zstd" if ZSWAP_COMPRESSOR_DEFAULT_ZSTD
+ default ""
+
+choice
+ prompt "Default allocator"
+ depends on ZSWAP
+ default ZSWAP_ZPOOL_DEFAULT_ZBUD
+ help
+ Selects the default allocator for the compressed cache for
+ swap pages.
+ The default is 'zbud' for compatibility, however please do
+ read the description of each of the allocators below before
+ making a right choice.
+
+ The selection made here can be overridden by using the kernel
+ command line 'zswap.zpool=' option.
+
+config ZSWAP_ZPOOL_DEFAULT_ZBUD
+ bool "zbud"
+ select ZBUD
+ help
+ Use the zbud allocator as the default allocator.
+
+config ZSWAP_ZPOOL_DEFAULT_Z3FOLD
+ bool "z3fold"
+ select Z3FOLD
+ help
+ Use the z3fold allocator as the default allocator.
+
+config ZSWAP_ZPOOL_DEFAULT_ZSMALLOC
+ bool "zsmalloc"
+ select ZSMALLOC
+ help
+ Use the zsmalloc allocator as the default allocator.
+endchoice
+
+config ZSWAP_ZPOOL_DEFAULT
+ string
+ depends on ZSWAP
+ default "zbud" if ZSWAP_ZPOOL_DEFAULT_ZBUD
+ default "z3fold" if ZSWAP_ZPOOL_DEFAULT_Z3FOLD
+ default "zsmalloc" if ZSWAP_ZPOOL_DEFAULT_ZSMALLOC
+ default ""
+
+config ZBUD
+ tristate "2:1 compression allocator (zbud)"
+ depends on ZSWAP
+ help
+ A special purpose allocator for storing compressed pages.
+ It is designed to store up to two compressed pages per physical
+ page. While this design limits storage density, it has simple and
+ deterministic reclaim properties that make it preferable to a higher
+ density approach when reclaim will be used.
+
+config Z3FOLD
+ tristate "3:1 compression allocator (z3fold)"
+ depends on ZSWAP
+ help
+ A special purpose allocator for storing compressed pages.
+ It is designed to store up to three compressed pages per physical
+ page. It is a ZBUD derivative so the simplicity and determinism are
+ still there.
+
+config ZSMALLOC
+ tristate
+ prompt "N:1 compression allocator (zsmalloc)" if ZSWAP
+ depends on MMU
+ help
+ zsmalloc is a slab-based memory allocator designed to store
+ pages of various compression levels efficiently. It achieves
+ the highest storage density with the least amount of fragmentation.
+
+config ZSMALLOC_STAT
+ bool "Export zsmalloc statistics"
+ depends on ZSMALLOC
+ select DEBUG_FS
+ help
+ This option enables code in the zsmalloc to collect various
+ statistics about what's happening in zsmalloc and exports that
+ information to userspace via debugfs.
+ If unsure, say N.
+
+config ZSMALLOC_CHAIN_SIZE
+ int "Maximum number of physical pages per-zspage"
+ default 8
+ range 4 16
+ depends on ZSMALLOC
+ help
+ This option sets the upper limit on the number of physical pages
+ that a zmalloc page (zspage) can consist of. The optimal zspage
+ chain size is calculated for each size class during the
+ initialization of the pool.
+
+ Changing this option can alter the characteristics of size classes,
+ such as the number of pages per zspage and the number of objects
+ per zspage. This can also result in different configurations of
+ the pool, as zsmalloc merges size classes with similar
+ characteristics.
+
+ For more information, see zsmalloc documentation.
+
+menu "SLAB allocator options"
+
+choice
+ prompt "Choose SLAB allocator"
+ default SLUB
+ help
+ This option allows to select a slab allocator.
+
+config SLAB_DEPRECATED
+ bool "SLAB (DEPRECATED)"
+ depends on !PREEMPT_RT
+ help
+ Deprecated and scheduled for removal in a few cycles. Replaced by
+ SLUB.
+
+ If you cannot migrate to SLUB, please contact linux-mm@kvack.org
+ and the people listed in the SLAB ALLOCATOR section of MAINTAINERS
+ file, explaining why.
+
+ The regular slab allocator that is established and known to work
+ well in all environments. It organizes cache hot objects in
+ per cpu and per node queues.
+
+config SLUB
+ bool "SLUB (Unqueued Allocator)"
+ help
+ SLUB is a slab allocator that minimizes cache line usage
+ instead of managing queues of cached objects (SLAB approach).
+ Per cpu caching is realized using slabs of objects instead
+ of queues of objects. SLUB can use memory efficiently
+ and has enhanced diagnostics. SLUB is the default choice for
+ a slab allocator.
+
+endchoice
+
+config SLAB
+ bool
+ default y
+ depends on SLAB_DEPRECATED
+
+config SLUB_TINY
+ bool "Configure SLUB for minimal memory footprint"
+ depends on SLUB && EXPERT
+ select SLAB_MERGE_DEFAULT
+ help
+ Configures the SLUB allocator in a way to achieve minimal memory
+ footprint, sacrificing scalability, debugging and other features.
+ This is intended only for the smallest system that had used the
+ SLOB allocator and is not recommended for systems with more than
+ 16MB RAM.
+
+ If unsure, say N.
+
+config SLAB_MERGE_DEFAULT
+ bool "Allow slab caches to be merged"
+ default y
+ depends on SLAB || SLUB
+ help
+ For reduced kernel memory fragmentation, slab caches can be
+ merged when they share the same size and other characteristics.
+ This carries a risk of kernel heap overflows being able to
+ overwrite objects from merged caches (and more easily control
+ cache layout), which makes such heap attacks easier to exploit
+ by attackers. By keeping caches unmerged, these kinds of exploits
+ can usually only damage objects in the same cache. To disable
+ merging at runtime, "slab_nomerge" can be passed on the kernel
+ command line.
+
+config SLAB_FREELIST_RANDOM
+ bool "Randomize slab freelist"
+ depends on SLAB || (SLUB && !SLUB_TINY)
+ help
+ Randomizes the freelist order used on creating new pages. This
+ security feature reduces the predictability of the kernel slab
+ allocator against heap overflows.
+
+config SLAB_FREELIST_HARDENED
+ bool "Harden slab freelist metadata"
+ depends on SLAB || (SLUB && !SLUB_TINY)
+ help
+ Many kernel heap attacks try to target slab cache metadata and
+ other infrastructure. This options makes minor performance
+ sacrifices to harden the kernel slab allocator against common
+ freelist exploit methods. Some slab implementations have more
+ sanity-checking than others. This option is most effective with
+ CONFIG_SLUB.
+
+config SLUB_STATS
+ default n
+ bool "Enable SLUB performance statistics"
+ depends on SLUB && SYSFS && !SLUB_TINY
+ help
+ SLUB statistics are useful to debug SLUBs allocation behavior in
+ order find ways to optimize the allocator. This should never be
+ enabled for production use since keeping statistics slows down
+ the allocator by a few percentage points. The slabinfo command
+ supports the determination of the most active slabs to figure
+ out which slabs are relevant to a particular load.
+ Try running: slabinfo -DA
+
+config SLUB_CPU_PARTIAL
+ default y
+ depends on SLUB && SMP && !SLUB_TINY
+ bool "SLUB per cpu partial cache"
+ help
+ Per cpu partial caches accelerate objects allocation and freeing
+ that is local to a processor at the price of more indeterminism
+ in the latency of the free. On overflow these caches will be cleared
+ which requires the taking of locks that may cause latency spikes.
+ Typically one would choose no for a realtime system.
+
+config RANDOM_KMALLOC_CACHES
+ default n
+ depends on SLUB && !SLUB_TINY
+ bool "Randomize slab caches for normal kmalloc"
+ help
+ A hardening feature that creates multiple copies of slab caches for
+ normal kmalloc allocation and makes kmalloc randomly pick one based
+ on code address, which makes the attackers more difficult to spray
+ vulnerable memory objects on the heap for the purpose of exploiting
+ memory vulnerabilities.
+
+ Currently the number of copies is set to 16, a reasonably large value
+ that effectively diverges the memory objects allocated for different
+ subsystems or modules into different caches, at the expense of a
+ limited degree of memory and CPU overhead that relates to hardware and
+ system workload.
+
+endmenu # SLAB allocator options
+
+config SHUFFLE_PAGE_ALLOCATOR
+ bool "Page allocator randomization"
+ default SLAB_FREELIST_RANDOM && ACPI_NUMA
+ help
+ Randomization of the page allocator improves the average
+ utilization of a direct-mapped memory-side-cache. See section
+ 5.2.27 Heterogeneous Memory Attribute Table (HMAT) in the ACPI
+ 6.2a specification for an example of how a platform advertises
+ the presence of a memory-side-cache. There are also incidental
+ security benefits as it reduces the predictability of page
+ allocations to compliment SLAB_FREELIST_RANDOM, but the
+ default granularity of shuffling on the MAX_ORDER i.e, 10th
+ order of pages is selected based on cache utilization benefits
+ on x86.
+
+ While the randomization improves cache utilization it may
+ negatively impact workloads on platforms without a cache. For
+ this reason, by default, the randomization is enabled only
+ after runtime detection of a direct-mapped memory-side-cache.
+ Otherwise, the randomization may be force enabled with the
+ 'page_alloc.shuffle' kernel command line parameter.
+
+ Say Y if unsure.
+
+config COMPAT_BRK
+ bool "Disable heap randomization"
+ default y
+ help
+ Randomizing heap placement makes heap exploits harder, but it
+ also breaks ancient binaries (including anything libc5 based).
+ This option changes the bootup default to heap randomization
+ disabled, and can be overridden at runtime by setting
+ /proc/sys/kernel/randomize_va_space to 2.
+
+ On non-ancient distros (post-2000 ones) N is usually a safe choice.
+
+config MMAP_ALLOW_UNINITIALIZED
+ bool "Allow mmapped anonymous memory to be uninitialized"
+ depends on EXPERT && !MMU
+ default n
+ help
+ Normally, and according to the Linux spec, anonymous memory obtained
+ from mmap() has its contents cleared before it is passed to
+ userspace. Enabling this config option allows you to request that
+ mmap() skip that if it is given an MAP_UNINITIALIZED flag, thus
+ providing a huge performance boost. If this option is not enabled,
+ then the flag will be ignored.
+
+ This is taken advantage of by uClibc's malloc(), and also by
+ ELF-FDPIC binfmt's brk and stack allocator.
+
+ Because of the obvious security issues, this option should only be
+ enabled on embedded devices where you control what is run in
+ userspace. Since that isn't generally a problem on no-MMU systems,
+ it is normally safe to say Y here.
+
+ See Documentation/admin-guide/mm/nommu-mmap.rst for more information.
+
+config SELECT_MEMORY_MODEL
+ def_bool y
+ depends on ARCH_SELECT_MEMORY_MODEL
+
+choice
+ prompt "Memory model"
+ depends on SELECT_MEMORY_MODEL
+ default SPARSEMEM_MANUAL if ARCH_SPARSEMEM_DEFAULT
+ default FLATMEM_MANUAL
+ help
+ This option allows you to change some of the ways that
+ Linux manages its memory internally. Most users will
+ only have one option here selected by the architecture
+ configuration. This is normal.
+
+config FLATMEM_MANUAL
+ bool "Flat Memory"
+ depends on !ARCH_SPARSEMEM_ENABLE || ARCH_FLATMEM_ENABLE
+ help
+ This option is best suited for non-NUMA systems with
+ flat address space. The FLATMEM is the most efficient
+ system in terms of performance and resource consumption
+ and it is the best option for smaller systems.
+
+ For systems that have holes in their physical address
+ spaces and for features like NUMA and memory hotplug,
+ choose "Sparse Memory".
+
+ If unsure, choose this option (Flat Memory) over any other.
+
+config SPARSEMEM_MANUAL
+ bool "Sparse Memory"
+ depends on ARCH_SPARSEMEM_ENABLE
+ help
+ This will be the only option for some systems, including
+ memory hot-plug systems. This is normal.
+
+ This option provides efficient support for systems with
+ holes is their physical address space and allows memory
+ hot-plug and hot-remove.
+
+ If unsure, choose "Flat Memory" over this option.
+
+endchoice
+
+config SPARSEMEM
+ def_bool y
+ depends on (!SELECT_MEMORY_MODEL && ARCH_SPARSEMEM_ENABLE) || SPARSEMEM_MANUAL
+
+config FLATMEM
+ def_bool y
+ depends on !SPARSEMEM || FLATMEM_MANUAL
+
+#
+# SPARSEMEM_EXTREME (which is the default) does some bootmem
+# allocations when sparse_init() is called. If this cannot
+# be done on your architecture, select this option. However,
+# statically allocating the mem_section[] array can potentially
+# consume vast quantities of .bss, so be careful.
+#
+# This option will also potentially produce smaller runtime code
+# with gcc 3.4 and later.
+#
+config SPARSEMEM_STATIC
+ bool
+
+#
+# Architecture platforms which require a two level mem_section in SPARSEMEM
+# must select this option. This is usually for architecture platforms with
+# an extremely sparse physical address space.
+#
+config SPARSEMEM_EXTREME
+ def_bool y
+ depends on SPARSEMEM && !SPARSEMEM_STATIC
+
+config SPARSEMEM_VMEMMAP_ENABLE
+ bool
+
+config SPARSEMEM_VMEMMAP
+ bool "Sparse Memory virtual memmap"
+ depends on SPARSEMEM && SPARSEMEM_VMEMMAP_ENABLE
+ default y
+ help
+ SPARSEMEM_VMEMMAP uses a virtually mapped memmap to optimise
+ pfn_to_page and page_to_pfn operations. This is the most
+ efficient option when sufficient kernel resources are available.
+#
+# Select this config option from the architecture Kconfig, if it is preferred
+# to enable the feature of HugeTLB/dev_dax vmemmap optimization.
+#
+config ARCH_WANT_OPTIMIZE_DAX_VMEMMAP
+ bool
+
+config ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP
+ bool
+
+config HAVE_MEMBLOCK_PHYS_MAP
+ bool
+
+config HAVE_FAST_GUP
+ depends on MMU
+ bool
+
+# Don't discard allocated memory used to track "memory" and "reserved" memblocks
+# after early boot, so it can still be used to test for validity of memory.
+# Also, memblocks are updated with memory hot(un)plug.
+config ARCH_KEEP_MEMBLOCK
+ bool
+
+# Keep arch NUMA mapping infrastructure post-init.
+config NUMA_KEEP_MEMINFO
+ bool
+
+config MEMORY_ISOLATION
+ bool
+
+# IORESOURCE_SYSTEM_RAM regions in the kernel resource tree that are marked
+# IORESOURCE_EXCLUSIVE cannot be mapped to user space, for example, via
+# /dev/mem.
+config EXCLUSIVE_SYSTEM_RAM
+ def_bool y
+ depends on !DEVMEM || STRICT_DEVMEM
+
+#
+# Only be set on architectures that have completely implemented memory hotplug
+# feature. If you are not sure, don't touch it.
+#
+config HAVE_BOOTMEM_INFO_NODE
+ def_bool n
+
+config ARCH_ENABLE_MEMORY_HOTPLUG
+ bool
+
+config ARCH_ENABLE_MEMORY_HOTREMOVE
+ bool
+
+# eventually, we can have this option just 'select SPARSEMEM'
+menuconfig MEMORY_HOTPLUG
+ bool "Memory hotplug"
+ select MEMORY_ISOLATION
+ depends on SPARSEMEM
+ depends on ARCH_ENABLE_MEMORY_HOTPLUG
+ depends on 64BIT
+ select NUMA_KEEP_MEMINFO if NUMA
+
+if MEMORY_HOTPLUG
+
+config MEMORY_HOTPLUG_DEFAULT_ONLINE
+ bool "Online the newly added memory blocks by default"
+ depends on MEMORY_HOTPLUG
+ help
+ This option sets the default policy setting for memory hotplug
+ onlining policy (/sys/devices/system/memory/auto_online_blocks) which
+ determines what happens to newly added memory regions. Policy setting
+ can always be changed at runtime.
+ See Documentation/admin-guide/mm/memory-hotplug.rst for more information.
+
+ Say Y here if you want all hot-plugged memory blocks to appear in
+ 'online' state by default.
+ Say N here if you want the default policy to keep all hot-plugged
+ memory blocks in 'offline' state.
+
+config MEMORY_HOTREMOVE
+ bool "Allow for memory hot remove"
+ select HAVE_BOOTMEM_INFO_NODE if (X86_64 || PPC64)
+ depends on MEMORY_HOTPLUG && ARCH_ENABLE_MEMORY_HOTREMOVE
+ depends on MIGRATION
+
+config MHP_MEMMAP_ON_MEMORY
+ def_bool y
+ depends on MEMORY_HOTPLUG && SPARSEMEM_VMEMMAP
+ depends on ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
+
+endif # MEMORY_HOTPLUG
+
+config ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
+ bool
+
+# Heavily threaded applications may benefit from splitting the mm-wide
+# page_table_lock, so that faults on different parts of the user address
+# space can be handled with less contention: split it at this NR_CPUS.
+# Default to 4 for wider testing, though 8 might be more appropriate.
+# ARM's adjust_pte (unused if VIPT) depends on mm-wide page_table_lock.
+# PA-RISC 7xxx's spinlock_t would enlarge struct page from 32 to 44 bytes.
+# SPARC32 allocates multiple pte tables within a single page, and therefore
+# a per-page lock leads to problems when multiple tables need to be locked
+# at the same time (e.g. copy_page_range()).
+# DEBUG_SPINLOCK and DEBUG_LOCK_ALLOC spinlock_t also enlarge struct page.
+#
+config SPLIT_PTLOCK_CPUS
+ int
+ default "999999" if !MMU
+ default "999999" if ARM && !CPU_CACHE_VIPT
+ default "999999" if PARISC && !PA20
+ default "999999" if SPARC32
+ default "4"
+
+config ARCH_ENABLE_SPLIT_PMD_PTLOCK
+ bool
+
+#
+# support for memory balloon
+config MEMORY_BALLOON
+ bool
+
+#
+# support for memory balloon compaction
+config BALLOON_COMPACTION
+ bool "Allow for balloon memory compaction/migration"
+ def_bool y
+ depends on COMPACTION && MEMORY_BALLOON
+ help
+ Memory fragmentation introduced by ballooning might reduce
+ significantly the number of 2MB contiguous memory blocks that can be
+ used within a guest, thus imposing performance penalties associated
+ with the reduced number of transparent huge pages that could be used
+ by the guest workload. Allowing the compaction & migration for memory
+ pages enlisted as being part of memory balloon devices avoids the
+ scenario aforementioned and helps improving memory defragmentation.
+
+#
+# support for memory compaction
+config COMPACTION
+ bool "Allow for memory compaction"
+ def_bool y
+ select MIGRATION
+ depends on MMU
+ help
+ Compaction is the only memory management component to form
+ high order (larger physically contiguous) memory blocks
+ reliably. The page allocator relies on compaction heavily and
+ the lack of the feature can lead to unexpected OOM killer
+ invocations for high order memory requests. You shouldn't
+ disable this option unless there really is a strong reason for
+ it and then we would be really interested to hear about that at
+ linux-mm@kvack.org.
+
+config COMPACT_UNEVICTABLE_DEFAULT
+ int
+ depends on COMPACTION
+ default 0 if PREEMPT_RT
+ default 1
+
+#
+# support for free page reporting
+config PAGE_REPORTING
+ bool "Free page reporting"
+ def_bool n
+ help
+ Free page reporting allows for the incremental acquisition of
+ free pages from the buddy allocator for the purpose of reporting
+ those pages to another entity, such as a hypervisor, so that the
+ memory can be freed within the host for other uses.
+
+#
+# support for page migration
+#
+config MIGRATION
+ bool "Page migration"
+ def_bool y
+ depends on (NUMA || ARCH_ENABLE_MEMORY_HOTREMOVE || COMPACTION || CMA) && MMU
+ help
+ Allows the migration of the physical location of pages of processes
+ while the virtual addresses are not changed. This is useful in
+ two situations. The first is on NUMA systems to put pages nearer
+ to the processors accessing. The second is when allocating huge
+ pages as migration can relocate pages to satisfy a huge page
+ allocation instead of reclaiming.
+
+config DEVICE_MIGRATION
+ def_bool MIGRATION && ZONE_DEVICE
+
+config ARCH_ENABLE_HUGEPAGE_MIGRATION
+ bool
+
+config ARCH_ENABLE_THP_MIGRATION
+ bool
+
+config HUGETLB_PAGE_SIZE_VARIABLE
+ def_bool n
+ help
+ Allows the pageblock_order value to be dynamic instead of just standard
+ HUGETLB_PAGE_ORDER when there are multiple HugeTLB page sizes available
+ on a platform.
+
+ Note that the pageblock_order cannot exceed MAX_ORDER and will be
+ clamped down to MAX_ORDER.
+
+config CONTIG_ALLOC
+ def_bool (MEMORY_ISOLATION && COMPACTION) || CMA
+
+config PHYS_ADDR_T_64BIT
+ def_bool 64BIT
+
+config BOUNCE
+ bool "Enable bounce buffers"
+ default y
+ depends on BLOCK && MMU && HIGHMEM
+ help
+ Enable bounce buffers for devices that cannot access the full range of
+ memory available to the CPU. Enabled by default when HIGHMEM is
+ selected, but you may say n to override this.
+
+config MMU_NOTIFIER
+ bool
+ select INTERVAL_TREE
+
+config KSM
+ bool "Enable KSM for page merging"
+ depends on MMU
+ select XXHASH
+ help
+ Enable Kernel Samepage Merging: KSM periodically scans those areas
+ of an application's address space that an app has advised may be
+ mergeable. When it finds pages of identical content, it replaces
+ the many instances by a single page with that content, so
+ saving memory until one or another app needs to modify the content.
+ Recommended for use with KVM, or with other duplicative applications.
+ See Documentation/mm/ksm.rst for more information: KSM is inactive
+ until a program has madvised that an area is MADV_MERGEABLE, and
+ root has set /sys/kernel/mm/ksm/run to 1 (if CONFIG_SYSFS is set).
+
+config DEFAULT_MMAP_MIN_ADDR
+ int "Low address space to protect from user allocation"
+ depends on MMU
+ default 4096
+ help
+ This is the portion of low virtual memory which should be protected
+ from userspace allocation. Keeping a user from writing to low pages
+ can help reduce the impact of kernel NULL pointer bugs.
+
+ For most ia64, ppc64 and x86 users with lots of address space
+ a value of 65536 is reasonable and should cause no problems.
+ On arm and other archs it should not be higher than 32768.
+ Programs which use vm86 functionality or have some need to map
+ this low address space will need CAP_SYS_RAWIO or disable this
+ protection by setting the value to 0.
+
+ This value can be changed after boot using the
+ /proc/sys/vm/mmap_min_addr tunable.
+
+config ARCH_SUPPORTS_MEMORY_FAILURE
+ bool
+
+config MEMORY_FAILURE
+ depends on MMU
+ depends on ARCH_SUPPORTS_MEMORY_FAILURE
+ bool "Enable recovery from hardware memory errors"
+ select MEMORY_ISOLATION
+ select RAS
+ help
+ Enables code to recover from some memory failures on systems
+ with MCA recovery. This allows a system to continue running
+ even when some of its memory has uncorrected errors. This requires
+ special hardware support and typically ECC memory.
+
+config HWPOISON_INJECT
+ tristate "HWPoison pages injector"
+ depends on MEMORY_FAILURE && DEBUG_KERNEL && PROC_FS
+ select PROC_PAGE_MONITOR
+
+config NOMMU_INITIAL_TRIM_EXCESS
+ int "Turn on mmap() excess space trimming before booting"
+ depends on !MMU
+ default 1
+ help
+ The NOMMU mmap() frequently needs to allocate large contiguous chunks
+ of memory on which to store mappings, but it can only ask the system
+ allocator for chunks in 2^N*PAGE_SIZE amounts - which is frequently
+ more than it requires. To deal with this, mmap() is able to trim off
+ the excess and return it to the allocator.
+
+ If trimming is enabled, the excess is trimmed off and returned to the
+ system allocator, which can cause extra fragmentation, particularly
+ if there are a lot of transient processes.
+
+ If trimming is disabled, the excess is kept, but not used, which for
+ long-term mappings means that the space is wasted.
+
+ Trimming can be dynamically controlled through a sysctl option
+ (/proc/sys/vm/nr_trim_pages) which specifies the minimum number of
+ excess pages there must be before trimming should occur, or zero if
+ no trimming is to occur.
+
+ This option specifies the initial value of this option. The default
+ of 1 says that all excess pages should be trimmed.
+
+ See Documentation/admin-guide/mm/nommu-mmap.rst for more information.
+
+config ARCH_WANT_GENERAL_HUGETLB
+ bool
+
+config ARCH_WANTS_THP_SWAP
+ def_bool n
+
+menuconfig TRANSPARENT_HUGEPAGE
+ bool "Transparent Hugepage Support"
+ depends on HAVE_ARCH_TRANSPARENT_HUGEPAGE && !PREEMPT_RT
+ select COMPACTION
+ select XARRAY_MULTI
+ help
+ Transparent Hugepages allows the kernel to use huge pages and
+ huge tlb transparently to the applications whenever possible.
+ This feature can improve computing performance to certain
+ applications by speeding up page faults during memory
+ allocation, by reducing the number of tlb misses and by speeding
+ up the pagetable walking.
+
+ If memory constrained on embedded, you may want to say N.
+
+if TRANSPARENT_HUGEPAGE
+
+choice
+ prompt "Transparent Hugepage Support sysfs defaults"
+ depends on TRANSPARENT_HUGEPAGE
+ default TRANSPARENT_HUGEPAGE_ALWAYS
+ help
+ Selects the sysfs defaults for Transparent Hugepage Support.
+
+ config TRANSPARENT_HUGEPAGE_ALWAYS
+ bool "always"
+ help
+ Enabling Transparent Hugepage always, can increase the
+ memory footprint of applications without a guaranteed
+ benefit but it will work automatically for all applications.
+
+ config TRANSPARENT_HUGEPAGE_MADVISE
+ bool "madvise"
+ help
+ Enabling Transparent Hugepage madvise, will only provide a
+ performance improvement benefit to the applications using
+ madvise(MADV_HUGEPAGE) but it won't risk to increase the
+ memory footprint of applications without a guaranteed
+ benefit.
+endchoice
+
+config THP_SWAP
+ def_bool y
+ depends on TRANSPARENT_HUGEPAGE && ARCH_WANTS_THP_SWAP && SWAP && 64BIT
+ help
+ Swap transparent huge pages in one piece, without splitting.
+ XXX: For now, swap cluster backing transparent huge page
+ will be split after swapout.
+
+ For selection by architectures with reasonable THP sizes.
+
+config READ_ONLY_THP_FOR_FS
+ bool "Read-only THP for filesystems (EXPERIMENTAL)"
+ depends on TRANSPARENT_HUGEPAGE && SHMEM
+
+ help
+ Allow khugepaged to put read-only file-backed pages in THP.
+
+ This is marked experimental because it is a new feature. Write
+ support of file THPs will be developed in the next few release
+ cycles.
+
+endif # TRANSPARENT_HUGEPAGE
+
+#
+# UP and nommu archs use km based percpu allocator
+#
+config NEED_PER_CPU_KM
+ depends on !SMP || !MMU
+ bool
+ default y
+
+config NEED_PER_CPU_EMBED_FIRST_CHUNK
+ bool
+
+config NEED_PER_CPU_PAGE_FIRST_CHUNK
+ bool
+
+config USE_PERCPU_NUMA_NODE_ID
+ bool
+
+config HAVE_SETUP_PER_CPU_AREA
+ bool
+
+config CMA
+ bool "Contiguous Memory Allocator"
+ depends on MMU
+ select MIGRATION
+ select MEMORY_ISOLATION
+ help
+ This enables the Contiguous Memory Allocator which allows other
+ subsystems to allocate big physically-contiguous blocks of memory.
+ CMA reserves a region of memory and allows only movable pages to
+ be allocated from it. This way, the kernel can use the memory for
+ pagecache and when a subsystem requests for contiguous area, the
+ allocated pages are migrated away to serve the contiguous request.
+
+ If unsure, say "n".
+
+config CMA_DEBUG
+ bool "CMA debug messages (DEVELOPMENT)"
+ depends on DEBUG_KERNEL && CMA
+ help
+ Turns on debug messages in CMA. This produces KERN_DEBUG
+ messages for every CMA call as well as various messages while
+ processing calls such as dma_alloc_from_contiguous().
+ This option does not affect warning and error messages.
+
+config CMA_DEBUGFS
+ bool "CMA debugfs interface"
+ depends on CMA && DEBUG_FS
+ help
+ Turns on the DebugFS interface for CMA.
+
+config CMA_SYSFS
+ bool "CMA information through sysfs interface"
+ depends on CMA && SYSFS
+ help
+ This option exposes some sysfs attributes to get information
+ from CMA.
+
+config CMA_AREAS
+ int "Maximum count of the CMA areas"
+ depends on CMA
+ default 19 if NUMA
+ default 7
+ help
+ CMA allows to create CMA areas for particular purpose, mainly,
+ used as device private area. This parameter sets the maximum
+ number of CMA area in the system.
+
+ If unsure, leave the default value "7" in UMA and "19" in NUMA.
+
+config MEM_SOFT_DIRTY
+ bool "Track memory changes"
+ depends on CHECKPOINT_RESTORE && HAVE_ARCH_SOFT_DIRTY && PROC_FS
+ select PROC_PAGE_MONITOR
+ help
+ This option enables memory changes tracking by introducing a
+ soft-dirty bit on pte-s. This bit it set when someone writes
+ into a page just as regular dirty bit, but unlike the latter
+ it can be cleared by hands.
+
+ See Documentation/admin-guide/mm/soft-dirty.rst for more details.
+
+config GENERIC_EARLY_IOREMAP
+ bool
+
+config STACK_MAX_DEFAULT_SIZE_MB
+ int "Default maximum user stack size for 32-bit processes (MB)"
+ default 100
+ range 8 2048
+ depends on STACK_GROWSUP && (!64BIT || COMPAT)
+ help
+ This is the maximum stack size in Megabytes in the VM layout of 32-bit
+ user processes when the stack grows upwards (currently only on parisc
+ arch) when the RLIMIT_STACK hard limit is unlimited.
+
+ A sane initial value is 100 MB.
+
+config DEFERRED_STRUCT_PAGE_INIT
+ bool "Defer initialisation of struct pages to kthreads"
+ depends on SPARSEMEM
+ depends on !NEED_PER_CPU_KM
+ depends on 64BIT
+ select PADATA
+ help
+ Ordinarily all struct pages are initialised during early boot in a
+ single thread. On very large machines this can take a considerable
+ amount of time. If this option is set, large machines will bring up
+ a subset of memmap at boot and then initialise the rest in parallel.
+ This has a potential performance impact on tasks running early in the
+ lifetime of the system until these kthreads finish the
+ initialisation.
+
+config PAGE_IDLE_FLAG
+ bool
+ select PAGE_EXTENSION if !64BIT
+ help
+ This adds PG_idle and PG_young flags to 'struct page'. PTE Accessed
+ bit writers can set the state of the bit in the flags so that PTE
+ Accessed bit readers may avoid disturbance.
+
+config IDLE_PAGE_TRACKING
+ bool "Enable idle page tracking"
+ depends on SYSFS && MMU
+ select PAGE_IDLE_FLAG
+ help
+ This feature allows to estimate the amount of user pages that have
+ not been touched during a given period of time. This information can
+ be useful to tune memory cgroup limits and/or for job placement
+ within a compute cluster.
+
+ See Documentation/admin-guide/mm/idle_page_tracking.rst for
+ more details.
+
+config ARCH_HAS_CACHE_LINE_SIZE
+ bool
+
+config ARCH_HAS_CURRENT_STACK_POINTER
+ bool
+ help
+ In support of HARDENED_USERCOPY performing stack variable lifetime
+ checking, an architecture-agnostic way to find the stack pointer
+ is needed. Once an architecture defines an unsigned long global
+ register alias named "current_stack_pointer", this config can be
+ selected.
+
+config ARCH_HAS_PTE_DEVMAP
+ bool
+
+config ARCH_HAS_ZONE_DMA_SET
+ bool
+
+config ZONE_DMA
+ bool "Support DMA zone" if ARCH_HAS_ZONE_DMA_SET
+ default y if ARM64 || X86
+
+config ZONE_DMA32
+ bool "Support DMA32 zone" if ARCH_HAS_ZONE_DMA_SET
+ depends on !X86_32
+ default y if ARM64
+
+config ZONE_DEVICE
+ bool "Device memory (pmem, HMM, etc...) hotplug support"
+ depends on MEMORY_HOTPLUG
+ depends on MEMORY_HOTREMOVE
+ depends on SPARSEMEM_VMEMMAP
+ depends on ARCH_HAS_PTE_DEVMAP
+ select XARRAY_MULTI
+
+ help
+ Device memory hotplug support allows for establishing pmem,
+ or other device driver discovered memory regions, in the
+ memmap. This allows pfn_to_page() lookups of otherwise
+ "device-physical" addresses which is needed for using a DAX
+ mapping in an O_DIRECT operation, among other things.
+
+ If FS_DAX is enabled, then say Y.
+
+#
+# Helpers to mirror range of the CPU page tables of a process into device page
+# tables.
+#
+config HMM_MIRROR
+ bool
+ depends on MMU
+
+config GET_FREE_REGION
+ depends on SPARSEMEM
+ bool
+
+config DEVICE_PRIVATE
+ bool "Unaddressable device memory (GPU memory, ...)"
+ depends on ZONE_DEVICE
+ select GET_FREE_REGION
+
+ help
+ Allows creation of struct pages to represent unaddressable device
+ memory; i.e., memory that is only accessible from the device (or
+ group of devices). You likely also want to select HMM_MIRROR.
+
+config VMAP_PFN
+ bool
+
+config ARCH_USES_HIGH_VMA_FLAGS
+ bool
+config ARCH_HAS_PKEYS
+ bool
+
+config ARCH_USES_PG_ARCH_X
+ bool
+ help
+ Enable the definition of PG_arch_x page flags with x > 1. Only
+ suitable for 64-bit architectures with CONFIG_FLATMEM or
+ CONFIG_SPARSEMEM_VMEMMAP enabled, otherwise there may not be
+ enough room for additional bits in page->flags.
+
+config VM_EVENT_COUNTERS
+ default y
+ bool "Enable VM event counters for /proc/vmstat" if EXPERT
+ help
+ VM event counters are needed for event counts to be shown.
+ This option allows the disabling of the VM event counters
+ on EXPERT systems. /proc/vmstat will only show page counts
+ if VM event counters are disabled.
+
+config PERCPU_STATS
+ bool "Collect percpu memory statistics"
+ help
+ This feature collects and exposes statistics via debugfs. The
+ information includes global and per chunk statistics, which can
+ be used to help understand percpu memory usage.
+
+config GUP_TEST
+ bool "Enable infrastructure for get_user_pages()-related unit tests"
+ depends on DEBUG_FS
+ help
+ Provides /sys/kernel/debug/gup_test, which in turn provides a way
+ to make ioctl calls that can launch kernel-based unit tests for
+ the get_user_pages*() and pin_user_pages*() family of API calls.
+
+ These tests include benchmark testing of the _fast variants of
+ get_user_pages*() and pin_user_pages*(), as well as smoke tests of
+ the non-_fast variants.
+
+ There is also a sub-test that allows running dump_page() on any
+ of up to eight pages (selected by command line args) within the
+ range of user-space addresses. These pages are either pinned via
+ pin_user_pages*(), or pinned via get_user_pages*(), as specified
+ by other command line arguments.
+
+ See tools/testing/selftests/mm/gup_test.c
+
+comment "GUP_TEST needs to have DEBUG_FS enabled"
+ depends on !GUP_TEST && !DEBUG_FS
+
+config GUP_GET_PXX_LOW_HIGH
+ bool
+
+config DMAPOOL_TEST
+ tristate "Enable a module to run time tests on dma_pool"
+ depends on HAS_DMA
+ help
+ Provides a test module that will allocate and free many blocks of
+ various sizes and report how long it takes. This is intended to
+ provide a consistent way to measure how changes to the
+ dma_pool_alloc/free routines affect performance.
+
+config ARCH_HAS_PTE_SPECIAL
+ bool
+
+#
+# Some architectures require a special hugepage directory format that is
+# required to support multiple hugepage sizes. For example a4fe3ce76
+# "powerpc/mm: Allow more flexible layouts for hugepage pagetables"
+# introduced it on powerpc. This allows for a more flexible hugepage
+# pagetable layouts.
+#
+config ARCH_HAS_HUGEPD
+ bool
+
+config MAPPING_DIRTY_HELPERS
+ bool
+
+config KMAP_LOCAL
+ bool
+
+config KMAP_LOCAL_NON_LINEAR_PTE_ARRAY
+ bool
+
+# struct io_mapping based helper. Selected by drivers that need them
+config IO_MAPPING
+ bool
+
+config MEMFD_CREATE
+ bool "Enable memfd_create() system call" if EXPERT
+
+config SECRETMEM
+ default y
+ bool "Enable memfd_secret() system call" if EXPERT
+ depends on ARCH_HAS_SET_DIRECT_MAP
+ help
+ Enable the memfd_secret() system call with the ability to create
+ memory areas visible only in the context of the owning process and
+ not mapped to other processes and other kernel page tables.
+
+config ANON_VMA_NAME
+ bool "Anonymous VMA name support"
+ depends on PROC_FS && ADVISE_SYSCALLS && MMU
+
+ help
+ Allow naming anonymous virtual memory areas.
+
+ This feature allows assigning names to virtual memory areas. Assigned
+ names can be later retrieved from /proc/pid/maps and /proc/pid/smaps
+ and help identifying individual anonymous memory areas.
+ Assigning a name to anonymous virtual memory area might prevent that
+ area from being merged with adjacent virtual memory areas due to the
+ difference in their name.
+
+config USERFAULTFD
+ bool "Enable userfaultfd() system call"
+ depends on MMU
+ help
+ Enable the userfaultfd() system call that allows to intercept and
+ handle page faults in userland.
+
+config HAVE_ARCH_USERFAULTFD_WP
+ bool
+ help
+ Arch has userfaultfd write protection support
+
+config HAVE_ARCH_USERFAULTFD_MINOR
+ bool
+ help
+ Arch has userfaultfd minor fault support
+
+config PTE_MARKER_UFFD_WP
+ bool "Userfaultfd write protection support for shmem/hugetlbfs"
+ default y
+ depends on HAVE_ARCH_USERFAULTFD_WP
+
+ help
+ Allows to create marker PTEs for userfaultfd write protection
+ purposes. It is required to enable userfaultfd write protection on
+ file-backed memory types like shmem and hugetlbfs.
+
+# multi-gen LRU {
+config LRU_GEN
+ bool "Multi-Gen LRU"
+ depends on MMU
+ # make sure folio->flags has enough spare bits
+ depends on 64BIT || !SPARSEMEM || SPARSEMEM_VMEMMAP
+ help
+ A high performance LRU implementation to overcommit memory. See
+ Documentation/admin-guide/mm/multigen_lru.rst for details.
+
+config LRU_GEN_ENABLED
+ bool "Enable by default"
+ depends on LRU_GEN
+ help
+ This option enables the multi-gen LRU by default.
+
+config LRU_GEN_STATS
+ bool "Full stats for debugging"
+ depends on LRU_GEN
+ help
+ Do not enable this option unless you plan to look at historical stats
+ from evicted generations for debugging purpose.
+
+ This option has a per-memcg and per-node memory overhead.
+# }
+
+config ARCH_SUPPORTS_PER_VMA_LOCK
+ def_bool n
+
+config PER_VMA_LOCK
+ def_bool y
+ depends on ARCH_SUPPORTS_PER_VMA_LOCK && MMU && SMP
+ help
+ Allow per-vma locking during page fault handling.
+
+ This feature allows locking each virtual memory area separately when
+ handling page faults instead of taking mmap_lock.
+
+config LOCK_MM_AND_FIND_VMA
+ bool
+ depends on !STACK_GROWSUP
+
+source "mm/damon/Kconfig"
+
+endmenu