Merging upstream version 6.9.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 41 insertions, 23 deletions

diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index d613a9e3ae..3da1c5c450 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -257,7 +257,6 @@ static bool ieee80211_scan_accept_presp(struct ieee80211_sub_if_data *sdata,
 void ieee80211_scan_rx(struct ieee80211_local *local, struct sk_buff *skb)
 {
 	struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(skb);
-	struct ieee80211_sub_if_data *sdata1, *sdata2;
 	struct ieee80211_mgmt *mgmt = (void *)skb->data;
 	struct ieee80211_bss *bss;
 	struct ieee80211_channel *channel;
@@ -281,12 +280,6 @@ void ieee80211_scan_rx(struct ieee80211_local *local, struct sk_buff *skb)
 	if (skb->len < min_hdr_len)
 		return;
 
-	sdata1 = rcu_dereference(local->scan_sdata);
-	sdata2 = rcu_dereference(local->sched_scan_sdata);
-
-	if (likely(!sdata1 && !sdata2))
-		return;
-
 	if (test_and_clear_bit(SCAN_BEACON_WAIT, &local->scanning)) {
 		/*
 		 * we were passive scanning because of radar/no-IR, but
@@ -304,10 +297,17 @@ void ieee80211_scan_rx(struct ieee80211_local *local, struct sk_buff *skb)
 		return;
 
 	if (ieee80211_is_probe_resp(mgmt->frame_control)) {
+		struct ieee80211_sub_if_data *sdata1, *sdata2;
 		struct cfg80211_scan_request *scan_req;
 		struct cfg80211_sched_scan_request *sched_scan_req;
 		u32 scan_req_flags = 0, sched_scan_req_flags = 0;
 
+		sdata1 = rcu_dereference(local->scan_sdata);
+		sdata2 = rcu_dereference(local->sched_scan_sdata);
+
+		if (likely(!sdata1 && !sdata2))
+			return;
+
 		scan_req = rcu_dereference(local->scan_req);
 		sched_scan_req = rcu_dereference(local->sched_scan_req);
 
@@ -327,8 +327,16 @@ void ieee80211_scan_rx(struct ieee80211_local *local, struct sk_buff *skb)
 						 sched_scan_req_flags,
 						 mgmt->da))
 			return;
+	} else {
+		/* Beacons are expected only with broadcast address */
+		if (!is_broadcast_ether_addr(mgmt->da))
+			return;
 	}
 
+	/* Do not update the BSS table in case of only monitor interfaces */
+	if (local->open_count == local->monitors)
+		return;
+
 	bss = ieee80211_bss_info_update(local, rx_status,
 					mgmt, skb->len,
 					channel);
@@ -400,6 +408,8 @@ static bool ieee80211_prep_hw_scan(struct ieee80211_sub_if_data *sdata)
 					 req->ie, req->ie_len,
 					 bands_used, req->rates, &chandef,
 					 flags);
+	if (ielen < 0)
+		return false;
 	local->hw_scan_req->req.ie_len = ielen;
 	local->hw_scan_req->req.no_cck = req->no_cck;
 	ether_addr_copy(local->hw_scan_req->req.mac_addr, req->mac_addr);
@@ -476,7 +486,7 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
 	}
 
 	/* Set power back to normal operating levels. */
-	ieee80211_hw_config(local, 0);
+	ieee80211_hw_conf_chan(local);
 
 	if (!hw_scan && was_scanning) {
 		ieee80211_configure_filter(local);
@@ -523,7 +533,7 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local,
 				   struct ieee80211_sub_if_data *sdata)
 {
 	/* Software scan is not supported in multi-channel cases */
-	if (local->use_chanctx)
+	if (!local->emulate_chanctx)
 		return -EOPNOTSUPP;
 
 	/*
@@ -553,7 +563,7 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local,
 	ieee80211_configure_filter(local);
 
 	/* We need to set power level at maximum rate for scanning. */
-	ieee80211_hw_config(local, 0);
+	ieee80211_hw_conf_chan(local);
 
 	wiphy_delayed_work_queue(local->hw.wiphy, &local->scan_work, 0);
 
@@ -678,7 +688,10 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local,
 	 * After sending probe requests, wait for probe responses
 	 * on the channel.
 	 */
-	*next_delay = IEEE80211_CHANNEL_TIME;
+	*next_delay = msecs_to_jiffies(scan_req->duration) >
+		      IEEE80211_PROBE_DELAY + IEEE80211_CHANNEL_TIME ?
+		      msecs_to_jiffies(scan_req->duration) - IEEE80211_PROBE_DELAY :
+		      IEEE80211_CHANNEL_TIME;
 	local->next_scan_state = SCAN_DECISION;
 }
 
@@ -780,7 +793,7 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata,
 	if (hw_scan) {
 		__set_bit(SCAN_HW_SCANNING, &local->scanning);
 	} else if ((req->n_channels == 1) &&
-		   (req->channels[0] == local->_oper_chandef.chan)) {
+		   (req->channels[0] == local->hw.conf.chandef.chan)) {
 		/*
 		 * If we are scanning only on the operating channel
 		 * then we do not need to stop normal activities
@@ -798,7 +811,7 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata,
 		ieee80211_configure_filter(local); /* accept probe-responses */
 
 		/* We need to ensure power level is at max for scanning. */
-		ieee80211_hw_config(local, 0);
+		ieee80211_hw_conf_chan(local);
 
 		if ((req->channels[0]->flags & (IEEE80211_CHAN_NO_IR |
 						IEEE80211_CHAN_RADAR)) ||
@@ -963,13 +976,13 @@ static void ieee80211_scan_state_set_channel(struct ieee80211_local *local,
 	/* If scanning on oper channel, use whatever channel-type
 	 * is currently in use.
 	 */
-	if (chan == local->_oper_chandef.chan)
-		local->scan_chandef = local->_oper_chandef;
+	if (chan == local->hw.conf.chandef.chan)
+		local->scan_chandef = local->hw.conf.chandef;
 	else
 		local->scan_chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
 
 set_channel:
-	if (ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL))
+	if (ieee80211_hw_conf_chan(local))
 		skip = 1;
 
 	/* advance state machine to next channel/band */
@@ -993,7 +1006,10 @@ set_channel:
 	 */
 	if ((chan->flags & (IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_RADAR)) ||
 	    !scan_req->n_ssids) {
-		*next_delay = IEEE80211_PASSIVE_CHANNEL_TIME;
+		*next_delay = msecs_to_jiffies(scan_req->duration) >
+			      IEEE80211_PASSIVE_CHANNEL_TIME ?
+			      msecs_to_jiffies(scan_req->duration) :
+			      IEEE80211_PASSIVE_CHANNEL_TIME;
 		local->next_scan_state = SCAN_DECISION;
 		if (scan_req->n_ssids)
 			set_bit(SCAN_BEACON_WAIT, &local->scanning);
@@ -1010,7 +1026,7 @@ static void ieee80211_scan_state_suspend(struct ieee80211_local *local,
 {
 	/* switch back to the operating channel */
 	local->scan_chandef.chan = NULL;
-	ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
+	ieee80211_hw_conf_chan(local);
 
 	/* disable PS */
 	ieee80211_offchannel_return(local);
@@ -1309,10 +1325,12 @@ int __ieee80211_request_sched_scan_start(struct ieee80211_sub_if_data *sdata,
 
 	ieee80211_prepare_scan_chandef(&chandef);
 
-	ieee80211_build_preq_ies(sdata, ie, num_bands * iebufsz,
-				 &sched_scan_ies, req->ie,
-				 req->ie_len, bands_used, rate_masks, &chandef,
-				 flags);
+	ret = ieee80211_build_preq_ies(sdata, ie, num_bands * iebufsz,
+				       &sched_scan_ies, req->ie,
+				       req->ie_len, bands_used, rate_masks,
+				       &chandef, flags);
+	if (ret < 0)
+		goto error;
 
 	ret = drv_sched_scan_start(local, sdata, req, &sched_scan_ies);
 	if (ret == 0) {
@@ -1320,8 +1338,8 @@ int __ieee80211_request_sched_scan_start(struct ieee80211_sub_if_data *sdata,
 		rcu_assign_pointer(local->sched_scan_req, req);
 	}
 
+error:
 	kfree(ie);
-
 out:
 	if (ret) {
 		/* Clean in case of failure after HW restart or upon resume. */