summaryrefslogtreecommitdiffstats
path: root/net/sched/Kconfig
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /net/sched/Kconfig
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'net/sched/Kconfig')
-rw-r--r--net/sched/Kconfig955
1 files changed, 955 insertions, 0 deletions
diff --git a/net/sched/Kconfig b/net/sched/Kconfig
new file mode 100644
index 0000000000..470c70deff
--- /dev/null
+++ b/net/sched/Kconfig
@@ -0,0 +1,955 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Traffic control configuration.
+#
+
+menuconfig NET_SCHED
+ bool "QoS and/or fair queueing"
+ select NET_SCH_FIFO
+ help
+ When the kernel has several packets to send out over a network
+ device, it has to decide which ones to send first, which ones to
+ delay, and which ones to drop. This is the job of the queueing
+ disciplines, several different algorithms for how to do this
+ "fairly" have been proposed.
+
+ If you say N here, you will get the standard packet scheduler, which
+ is a FIFO (first come, first served). If you say Y here, you will be
+ able to choose from among several alternative algorithms which can
+ then be attached to different network devices. This is useful for
+ example if some of your network devices are real time devices that
+ need a certain minimum data flow rate, or if you need to limit the
+ maximum data flow rate for traffic which matches specified criteria.
+ This code is considered to be experimental.
+
+ To administer these schedulers, you'll need the user-level utilities
+ from the package iproute2+tc at
+ <https://www.kernel.org/pub/linux/utils/net/iproute2/>. That package
+ also contains some documentation; for more, check out
+ <http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2>.
+
+ This Quality of Service (QoS) support will enable you to use
+ Differentiated Services (diffserv) and Resource Reservation Protocol
+ (RSVP) on your Linux router if you also say Y to the corresponding
+ classifiers below. Documentation and software is at
+ <http://diffserv.sourceforge.net/>.
+
+ If you say Y here and to "/proc file system" below, you will be able
+ to read status information about packet schedulers from the file
+ /proc/net/psched.
+
+ The available schedulers are listed in the following questions; you
+ can say Y to as many as you like. If unsure, say N now.
+
+if NET_SCHED
+
+comment "Queueing/Scheduling"
+
+config NET_SCH_HTB
+ tristate "Hierarchical Token Bucket (HTB)"
+ help
+ Say Y here if you want to use the Hierarchical Token Buckets (HTB)
+ packet scheduling algorithm. See
+ <http://luxik.cdi.cz/~devik/qos/htb/> for complete manual and
+ in-depth articles.
+
+ HTB is very similar to CBQ regarding its goals however is has
+ different properties and different algorithm.
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_htb.
+
+config NET_SCH_HFSC
+ tristate "Hierarchical Fair Service Curve (HFSC)"
+ help
+ Say Y here if you want to use the Hierarchical Fair Service Curve
+ (HFSC) packet scheduling algorithm.
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_hfsc.
+
+config NET_SCH_PRIO
+ tristate "Multi Band Priority Queueing (PRIO)"
+ help
+ Say Y here if you want to use an n-band priority queue packet
+ scheduler.
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_prio.
+
+config NET_SCH_MULTIQ
+ tristate "Hardware Multiqueue-aware Multi Band Queuing (MULTIQ)"
+ help
+ Say Y here if you want to use an n-band queue packet scheduler
+ to support devices that have multiple hardware transmit queues.
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_multiq.
+
+config NET_SCH_RED
+ tristate "Random Early Detection (RED)"
+ help
+ Say Y here if you want to use the Random Early Detection (RED)
+ packet scheduling algorithm.
+
+ See the top of <file:net/sched/sch_red.c> for more details.
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_red.
+
+config NET_SCH_SFB
+ tristate "Stochastic Fair Blue (SFB)"
+ help
+ Say Y here if you want to use the Stochastic Fair Blue (SFB)
+ packet scheduling algorithm.
+
+ See the top of <file:net/sched/sch_sfb.c> for more details.
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_sfb.
+
+config NET_SCH_SFQ
+ tristate "Stochastic Fairness Queueing (SFQ)"
+ help
+ Say Y here if you want to use the Stochastic Fairness Queueing (SFQ)
+ packet scheduling algorithm.
+
+ See the top of <file:net/sched/sch_sfq.c> for more details.
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_sfq.
+
+config NET_SCH_TEQL
+ tristate "True Link Equalizer (TEQL)"
+ help
+ Say Y here if you want to use the True Link Equalizer (TLE) packet
+ scheduling algorithm. This queueing discipline allows the combination
+ of several physical devices into one virtual device.
+
+ See the top of <file:net/sched/sch_teql.c> for more details.
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_teql.
+
+config NET_SCH_TBF
+ tristate "Token Bucket Filter (TBF)"
+ help
+ Say Y here if you want to use the Token Bucket Filter (TBF) packet
+ scheduling algorithm.
+
+ See the top of <file:net/sched/sch_tbf.c> for more details.
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_tbf.
+
+config NET_SCH_CBS
+ tristate "Credit Based Shaper (CBS)"
+ help
+ Say Y here if you want to use the Credit Based Shaper (CBS) packet
+ scheduling algorithm.
+
+ See the top of <file:net/sched/sch_cbs.c> for more details.
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_cbs.
+
+config NET_SCH_ETF
+ tristate "Earliest TxTime First (ETF)"
+ help
+ Say Y here if you want to use the Earliest TxTime First (ETF) packet
+ scheduling algorithm.
+
+ See the top of <file:net/sched/sch_etf.c> for more details.
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_etf.
+
+config NET_SCH_MQPRIO_LIB
+ tristate
+ help
+ Common library for manipulating mqprio queue configurations.
+
+config NET_SCH_TAPRIO
+ tristate "Time Aware Priority (taprio) Scheduler"
+ select NET_SCH_MQPRIO_LIB
+ help
+ Say Y here if you want to use the Time Aware Priority (taprio) packet
+ scheduling algorithm.
+
+ See the top of <file:net/sched/sch_taprio.c> for more details.
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_taprio.
+
+config NET_SCH_GRED
+ tristate "Generic Random Early Detection (GRED)"
+ help
+ Say Y here if you want to use the Generic Random Early Detection
+ (GRED) packet scheduling algorithm for some of your network devices
+ (see the top of <file:net/sched/sch_red.c> for details and
+ references about the algorithm).
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_gred.
+
+config NET_SCH_NETEM
+ tristate "Network emulator (NETEM)"
+ help
+ Say Y if you want to emulate network delay, loss, and packet
+ re-ordering. This is often useful to simulate networks when
+ testing applications or protocols.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sch_netem.
+
+ If unsure, say N.
+
+config NET_SCH_DRR
+ tristate "Deficit Round Robin scheduler (DRR)"
+ help
+ Say Y here if you want to use the Deficit Round Robin (DRR) packet
+ scheduling algorithm.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sch_drr.
+
+ If unsure, say N.
+
+config NET_SCH_MQPRIO
+ tristate "Multi-queue priority scheduler (MQPRIO)"
+ select NET_SCH_MQPRIO_LIB
+ help
+ Say Y here if you want to use the Multi-queue Priority scheduler.
+ This scheduler allows QOS to be offloaded on NICs that have support
+ for offloading QOS schedulers.
+
+ To compile this driver as a module, choose M here: the module will
+ be called sch_mqprio.
+
+ If unsure, say N.
+
+config NET_SCH_SKBPRIO
+ tristate "SKB priority queue scheduler (SKBPRIO)"
+ help
+ Say Y here if you want to use the SKB priority queue
+ scheduler. This schedules packets according to skb->priority,
+ which is useful for request packets in DoS mitigation systems such
+ as Gatekeeper.
+
+ To compile this driver as a module, choose M here: the module will
+ be called sch_skbprio.
+
+ If unsure, say N.
+
+config NET_SCH_CHOKE
+ tristate "CHOose and Keep responsive flow scheduler (CHOKE)"
+ help
+ Say Y here if you want to use the CHOKe packet scheduler (CHOose
+ and Keep for responsive flows, CHOose and Kill for unresponsive
+ flows). This is a variation of RED which tries to penalize flows
+ that monopolize the queue.
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_choke.
+
+config NET_SCH_QFQ
+ tristate "Quick Fair Queueing scheduler (QFQ)"
+ help
+ Say Y here if you want to use the Quick Fair Queueing Scheduler (QFQ)
+ packet scheduling algorithm.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sch_qfq.
+
+ If unsure, say N.
+
+config NET_SCH_CODEL
+ tristate "Controlled Delay AQM (CODEL)"
+ help
+ Say Y here if you want to use the Controlled Delay (CODEL)
+ packet scheduling algorithm.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sch_codel.
+
+ If unsure, say N.
+
+config NET_SCH_FQ_CODEL
+ tristate "Fair Queue Controlled Delay AQM (FQ_CODEL)"
+ help
+ Say Y here if you want to use the FQ Controlled Delay (FQ_CODEL)
+ packet scheduling algorithm.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sch_fq_codel.
+
+ If unsure, say N.
+
+config NET_SCH_CAKE
+ tristate "Common Applications Kept Enhanced (CAKE)"
+ help
+ Say Y here if you want to use the Common Applications Kept Enhanced
+ (CAKE) queue management algorithm.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sch_cake.
+
+ If unsure, say N.
+
+config NET_SCH_FQ
+ tristate "Fair Queue"
+ help
+ Say Y here if you want to use the FQ packet scheduling algorithm.
+
+ FQ does flow separation, and is able to respect pacing requirements
+ set by TCP stack into sk->sk_pacing_rate (for locally generated
+ traffic)
+
+ To compile this driver as a module, choose M here: the module
+ will be called sch_fq.
+
+ If unsure, say N.
+
+config NET_SCH_HHF
+ tristate "Heavy-Hitter Filter (HHF)"
+ help
+ Say Y here if you want to use the Heavy-Hitter Filter (HHF)
+ packet scheduling algorithm.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sch_hhf.
+
+config NET_SCH_PIE
+ tristate "Proportional Integral controller Enhanced (PIE) scheduler"
+ help
+ Say Y here if you want to use the Proportional Integral controller
+ Enhanced scheduler packet scheduling algorithm.
+ For more information, please see https://tools.ietf.org/html/rfc8033
+
+ To compile this driver as a module, choose M here: the module
+ will be called sch_pie.
+
+ If unsure, say N.
+
+config NET_SCH_FQ_PIE
+ depends on NET_SCH_PIE
+ tristate "Flow Queue Proportional Integral controller Enhanced (FQ-PIE)"
+ help
+ Say Y here if you want to use the Flow Queue Proportional Integral
+ controller Enhanced (FQ-PIE) packet scheduling algorithm.
+ For more information, please see https://tools.ietf.org/html/rfc8033
+
+ To compile this driver as a module, choose M here: the module
+ will be called sch_fq_pie.
+
+ If unsure, say N.
+
+config NET_SCH_INGRESS
+ tristate "Ingress/classifier-action Qdisc"
+ depends on NET_CLS_ACT
+ select NET_XGRESS
+ help
+ Say Y here if you want to use classifiers for incoming and/or outgoing
+ packets. This qdisc doesn't do anything else besides running classifiers,
+ which can also have actions attached to them. In case of outgoing packets,
+ classifiers that this qdisc holds are executed in the transmit path
+ before real enqueuing to an egress qdisc happens.
+
+ If unsure, say Y.
+
+ To compile this code as a module, choose M here: the module will be
+ called sch_ingress with alias of sch_clsact.
+
+config NET_SCH_PLUG
+ tristate "Plug network traffic until release (PLUG)"
+ help
+
+ This queuing discipline allows userspace to plug/unplug a network
+ output queue, using the netlink interface. When it receives an
+ enqueue command it inserts a plug into the outbound queue that
+ causes following packets to enqueue until a dequeue command arrives
+ over netlink, causing the plug to be removed and resuming the normal
+ packet flow.
+
+ This module also provides a generic "network output buffering"
+ functionality (aka output commit), wherein upon arrival of a dequeue
+ command, only packets up to the first plug are released for delivery.
+ The Remus HA project uses this module to enable speculative execution
+ of virtual machines by allowing the generated network output to be rolled
+ back if needed.
+
+ For more information, please refer to <http://wiki.xenproject.org/wiki/Remus>
+
+ Say Y here if you are using this kernel for Xen dom0 and
+ want to protect Xen guests with Remus.
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_plug.
+
+config NET_SCH_ETS
+ tristate "Enhanced transmission selection scheduler (ETS)"
+ help
+ The Enhanced Transmission Selection scheduler is a classful
+ queuing discipline that merges functionality of PRIO and DRR
+ qdiscs in one scheduler. ETS makes it easy to configure a set of
+ strict and bandwidth-sharing bands to implement the transmission
+ selection described in 802.1Qaz.
+
+ Say Y here if you want to use the ETS packet scheduling
+ algorithm.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sch_ets.
+
+ If unsure, say N.
+
+menuconfig NET_SCH_DEFAULT
+ bool "Allow override default queue discipline"
+ help
+ Support for selection of default queuing discipline.
+
+ Nearly all users can safely say no here, and the default
+ of pfifo_fast will be used. Many distributions already set
+ the default value via /proc/sys/net/core/default_qdisc.
+
+ If unsure, say N.
+
+if NET_SCH_DEFAULT
+
+choice
+ prompt "Default queuing discipline"
+ default DEFAULT_PFIFO_FAST
+ help
+ Select the queueing discipline that will be used by default
+ for all network devices.
+
+ config DEFAULT_FQ
+ bool "Fair Queue" if NET_SCH_FQ
+
+ config DEFAULT_CODEL
+ bool "Controlled Delay" if NET_SCH_CODEL
+
+ config DEFAULT_FQ_CODEL
+ bool "Fair Queue Controlled Delay" if NET_SCH_FQ_CODEL
+
+ config DEFAULT_FQ_PIE
+ bool "Flow Queue Proportional Integral controller Enhanced" if NET_SCH_FQ_PIE
+
+ config DEFAULT_SFQ
+ bool "Stochastic Fair Queue" if NET_SCH_SFQ
+
+ config DEFAULT_PFIFO_FAST
+ bool "Priority FIFO Fast"
+endchoice
+
+config DEFAULT_NET_SCH
+ string
+ default "pfifo_fast" if DEFAULT_PFIFO_FAST
+ default "fq" if DEFAULT_FQ
+ default "fq_codel" if DEFAULT_FQ_CODEL
+ default "fq_pie" if DEFAULT_FQ_PIE
+ default "sfq" if DEFAULT_SFQ
+ default "pfifo_fast"
+endif
+
+comment "Classification"
+
+config NET_CLS
+ bool
+
+config NET_CLS_BASIC
+ tristate "Elementary classification (BASIC)"
+ select NET_CLS
+ help
+ Say Y here if you want to be able to classify packets using
+ only extended matches and actions.
+
+ To compile this code as a module, choose M here: the
+ module will be called cls_basic.
+
+config NET_CLS_ROUTE4
+ tristate "Routing decision (ROUTE)"
+ depends on INET
+ select IP_ROUTE_CLASSID
+ select NET_CLS
+ help
+ If you say Y here, you will be able to classify packets
+ according to the route table entry they matched.
+
+ To compile this code as a module, choose M here: the
+ module will be called cls_route.
+
+config NET_CLS_FW
+ tristate "Netfilter mark (FW)"
+ select NET_CLS
+ help
+ If you say Y here, you will be able to classify packets
+ according to netfilter/firewall marks.
+
+ To compile this code as a module, choose M here: the
+ module will be called cls_fw.
+
+config NET_CLS_U32
+ tristate "Universal 32bit comparisons w/ hashing (U32)"
+ select NET_CLS
+ help
+ Say Y here to be able to classify packets using a universal
+ 32bit pieces based comparison scheme.
+
+ To compile this code as a module, choose M here: the
+ module will be called cls_u32.
+
+config CLS_U32_PERF
+ bool "Performance counters support"
+ depends on NET_CLS_U32
+ help
+ Say Y here to make u32 gather additional statistics useful for
+ fine tuning u32 classifiers.
+
+config CLS_U32_MARK
+ bool "Netfilter marks support"
+ depends on NET_CLS_U32
+ help
+ Say Y here to be able to use netfilter marks as u32 key.
+
+config NET_CLS_FLOW
+ tristate "Flow classifier"
+ select NET_CLS
+ help
+ If you say Y here, you will be able to classify packets based on
+ a configurable combination of packet keys. This is mostly useful
+ in combination with SFQ.
+
+ To compile this code as a module, choose M here: the
+ module will be called cls_flow.
+
+config NET_CLS_CGROUP
+ tristate "Control Group Classifier"
+ select NET_CLS
+ select CGROUP_NET_CLASSID
+ depends on CGROUPS
+ help
+ Say Y here if you want to classify packets based on the control
+ cgroup of their process.
+
+ To compile this code as a module, choose M here: the
+ module will be called cls_cgroup.
+
+config NET_CLS_BPF
+ tristate "BPF-based classifier"
+ select NET_CLS
+ help
+ If you say Y here, you will be able to classify packets based on
+ programmable BPF (JIT'ed) filters as an alternative to ematches.
+
+ To compile this code as a module, choose M here: the module will
+ be called cls_bpf.
+
+config NET_CLS_FLOWER
+ tristate "Flower classifier"
+ select NET_CLS
+ help
+ If you say Y here, you will be able to classify packets based on
+ a configurable combination of packet keys and masks.
+
+ To compile this code as a module, choose M here: the module will
+ be called cls_flower.
+
+config NET_CLS_MATCHALL
+ tristate "Match-all classifier"
+ select NET_CLS
+ help
+ If you say Y here, you will be able to classify packets based on
+ nothing. Every packet will match.
+
+ To compile this code as a module, choose M here: the module will
+ be called cls_matchall.
+
+config NET_EMATCH
+ bool "Extended Matches"
+ select NET_CLS
+ help
+ Say Y here if you want to use extended matches on top of classifiers
+ and select the extended matches below.
+
+ Extended matches are small classification helpers not worth writing
+ a separate classifier for.
+
+ A recent version of the iproute2 package is required to use
+ extended matches.
+
+config NET_EMATCH_STACK
+ int "Stack size"
+ depends on NET_EMATCH
+ default "32"
+ help
+ Size of the local stack variable used while evaluating the tree of
+ ematches. Limits the depth of the tree, i.e. the number of
+ encapsulated precedences. Every level requires 4 bytes of additional
+ stack space.
+
+config NET_EMATCH_CMP
+ tristate "Simple packet data comparison"
+ depends on NET_EMATCH
+ help
+ Say Y here if you want to be able to classify packets based on
+ simple packet data comparisons for 8, 16, and 32bit values.
+
+ To compile this code as a module, choose M here: the
+ module will be called em_cmp.
+
+config NET_EMATCH_NBYTE
+ tristate "Multi byte comparison"
+ depends on NET_EMATCH
+ help
+ Say Y here if you want to be able to classify packets based on
+ multiple byte comparisons mainly useful for IPv6 address comparisons.
+
+ To compile this code as a module, choose M here: the
+ module will be called em_nbyte.
+
+config NET_EMATCH_U32
+ tristate "U32 key"
+ depends on NET_EMATCH
+ help
+ Say Y here if you want to be able to classify packets using
+ the famous u32 key in combination with logic relations.
+
+ To compile this code as a module, choose M here: the
+ module will be called em_u32.
+
+config NET_EMATCH_META
+ tristate "Metadata"
+ depends on NET_EMATCH
+ help
+ Say Y here if you want to be able to classify packets based on
+ metadata such as load average, netfilter attributes, socket
+ attributes and routing decisions.
+
+ To compile this code as a module, choose M here: the
+ module will be called em_meta.
+
+config NET_EMATCH_TEXT
+ tristate "Textsearch"
+ depends on NET_EMATCH
+ select TEXTSEARCH
+ select TEXTSEARCH_KMP
+ select TEXTSEARCH_BM
+ select TEXTSEARCH_FSM
+ help
+ Say Y here if you want to be able to classify packets based on
+ textsearch comparisons.
+
+ To compile this code as a module, choose M here: the
+ module will be called em_text.
+
+config NET_EMATCH_CANID
+ tristate "CAN Identifier"
+ depends on NET_EMATCH && (CAN=y || CAN=m)
+ help
+ Say Y here if you want to be able to classify CAN frames based
+ on CAN Identifier.
+
+ To compile this code as a module, choose M here: the
+ module will be called em_canid.
+
+config NET_EMATCH_IPSET
+ tristate "IPset"
+ depends on NET_EMATCH && IP_SET
+ help
+ Say Y here if you want to be able to classify packets based on
+ ipset membership.
+
+ To compile this code as a module, choose M here: the
+ module will be called em_ipset.
+
+config NET_EMATCH_IPT
+ tristate "IPtables Matches"
+ depends on NET_EMATCH && NETFILTER && NETFILTER_XTABLES
+ help
+ Say Y here to be able to classify packets based on iptables
+ matches.
+ Current supported match is "policy" which allows packet classification
+ based on IPsec policy that was used during decapsulation
+
+ To compile this code as a module, choose M here: the
+ module will be called em_ipt.
+
+config NET_CLS_ACT
+ bool "Actions"
+ select NET_CLS
+ select NET_XGRESS
+ help
+ Say Y here if you want to use traffic control actions. Actions
+ get attached to classifiers and are invoked after a successful
+ classification. They are used to overwrite the classification
+ result, instantly drop or redirect packets, etc.
+
+ A recent version of the iproute2 package is required to use
+ extended matches.
+
+config NET_ACT_POLICE
+ tristate "Traffic Policing"
+ depends on NET_CLS_ACT
+ help
+ Say Y here if you want to do traffic policing, i.e. strict
+ bandwidth limiting. This action replaces the existing policing
+ module.
+
+ To compile this code as a module, choose M here: the
+ module will be called act_police.
+
+config NET_ACT_GACT
+ tristate "Generic actions"
+ depends on NET_CLS_ACT
+ help
+ Say Y here to take generic actions such as dropping and
+ accepting packets.
+
+ To compile this code as a module, choose M here: the
+ module will be called act_gact.
+
+config GACT_PROB
+ bool "Probability support"
+ depends on NET_ACT_GACT
+ help
+ Say Y here to use the generic action randomly or deterministically.
+
+config NET_ACT_MIRRED
+ tristate "Redirecting and Mirroring"
+ depends on NET_CLS_ACT
+ help
+ Say Y here to allow packets to be mirrored or redirected to
+ other devices.
+
+ To compile this code as a module, choose M here: the
+ module will be called act_mirred.
+
+config NET_ACT_SAMPLE
+ tristate "Traffic Sampling"
+ depends on NET_CLS_ACT
+ select PSAMPLE
+ help
+ Say Y here to allow packet sampling tc action. The packet sample
+ action consists of statistically choosing packets and sampling
+ them using the psample module.
+
+ To compile this code as a module, choose M here: the
+ module will be called act_sample.
+
+config NET_ACT_IPT
+ tristate "IPtables targets"
+ depends on NET_CLS_ACT && NETFILTER && NETFILTER_XTABLES
+ help
+ Say Y here to be able to invoke iptables targets after successful
+ classification.
+
+ To compile this code as a module, choose M here: the
+ module will be called act_ipt.
+
+config NET_ACT_NAT
+ tristate "Stateless NAT"
+ depends on NET_CLS_ACT
+ help
+ Say Y here to do stateless NAT on IPv4 packets. You should use
+ netfilter for NAT unless you know what you are doing.
+
+ To compile this code as a module, choose M here: the
+ module will be called act_nat.
+
+config NET_ACT_PEDIT
+ tristate "Packet Editing"
+ depends on NET_CLS_ACT
+ help
+ Say Y here if you want to mangle the content of packets.
+
+ To compile this code as a module, choose M here: the
+ module will be called act_pedit.
+
+config NET_ACT_SIMP
+ tristate "Simple Example (Debug)"
+ depends on NET_CLS_ACT
+ help
+ Say Y here to add a simple action for demonstration purposes.
+ It is meant as an example and for debugging purposes. It will
+ print a configured policy string followed by the packet count
+ to the console for every packet that passes by.
+
+ If unsure, say N.
+
+ To compile this code as a module, choose M here: the
+ module will be called act_simple.
+
+config NET_ACT_SKBEDIT
+ tristate "SKB Editing"
+ depends on NET_CLS_ACT
+ help
+ Say Y here to change skb priority or queue_mapping settings.
+
+ If unsure, say N.
+
+ To compile this code as a module, choose M here: the
+ module will be called act_skbedit.
+
+config NET_ACT_CSUM
+ tristate "Checksum Updating"
+ depends on NET_CLS_ACT && INET
+ select LIBCRC32C
+ help
+ Say Y here to update some common checksum after some direct
+ packet alterations.
+
+ To compile this code as a module, choose M here: the
+ module will be called act_csum.
+
+config NET_ACT_MPLS
+ tristate "MPLS manipulation"
+ depends on NET_CLS_ACT
+ help
+ Say Y here to push or pop MPLS headers.
+
+ If unsure, say N.
+
+ To compile this code as a module, choose M here: the
+ module will be called act_mpls.
+
+config NET_ACT_VLAN
+ tristate "Vlan manipulation"
+ depends on NET_CLS_ACT
+ help
+ Say Y here to push or pop vlan headers.
+
+ If unsure, say N.
+
+ To compile this code as a module, choose M here: the
+ module will be called act_vlan.
+
+config NET_ACT_BPF
+ tristate "BPF based action"
+ depends on NET_CLS_ACT
+ help
+ Say Y here to execute BPF code on packets. The BPF code will decide
+ if the packet should be dropped or not.
+
+ If unsure, say N.
+
+ To compile this code as a module, choose M here: the
+ module will be called act_bpf.
+
+config NET_ACT_CONNMARK
+ tristate "Netfilter Connection Mark Retriever"
+ depends on NET_CLS_ACT && NETFILTER
+ depends on NF_CONNTRACK && NF_CONNTRACK_MARK
+ help
+ Say Y here to allow retrieving of conn mark
+
+ If unsure, say N.
+
+ To compile this code as a module, choose M here: the
+ module will be called act_connmark.
+
+config NET_ACT_CTINFO
+ tristate "Netfilter Connection Mark Actions"
+ depends on NET_CLS_ACT && NETFILTER
+ depends on NF_CONNTRACK && NF_CONNTRACK_MARK
+ help
+ Say Y here to allow transfer of a connmark stored information.
+ Current actions transfer connmark stored DSCP into
+ ipv4/v6 diffserv and/or to transfer connmark to packet
+ mark. Both are useful for restoring egress based marks
+ back onto ingress connections for qdisc priority mapping
+ purposes.
+
+ If unsure, say N.
+
+ To compile this code as a module, choose M here: the
+ module will be called act_ctinfo.
+
+config NET_ACT_SKBMOD
+ tristate "skb data modification action"
+ depends on NET_CLS_ACT
+ help
+ Say Y here to allow modification of skb data
+
+ If unsure, say N.
+
+ To compile this code as a module, choose M here: the
+ module will be called act_skbmod.
+
+config NET_ACT_IFE
+ tristate "Inter-FE action based on IETF ForCES InterFE LFB"
+ depends on NET_CLS_ACT
+ select NET_IFE
+ help
+ Say Y here to allow for sourcing and terminating metadata
+ For details refer to netdev01 paper:
+ "Distributing Linux Traffic Control Classifier-Action Subsystem"
+ Authors: Jamal Hadi Salim and Damascene M. Joachimpillai
+
+ To compile this code as a module, choose M here: the
+ module will be called act_ife.
+
+config NET_ACT_TUNNEL_KEY
+ tristate "IP tunnel metadata manipulation"
+ depends on NET_CLS_ACT
+ help
+ Say Y here to set/release ip tunnel metadata.
+
+ If unsure, say N.
+
+ To compile this code as a module, choose M here: the
+ module will be called act_tunnel_key.
+
+config NET_ACT_CT
+ tristate "connection tracking tc action"
+ depends on NET_CLS_ACT && NF_CONNTRACK && (!NF_NAT || NF_NAT) && NF_FLOW_TABLE
+ select NF_CONNTRACK_OVS
+ select NF_NAT_OVS if NF_NAT
+ help
+ Say Y here to allow sending the packets to conntrack module.
+
+ If unsure, say N.
+
+ To compile this code as a module, choose M here: the
+ module will be called act_ct.
+
+config NET_ACT_GATE
+ tristate "Frame gate entry list control tc action"
+ depends on NET_CLS_ACT
+ help
+ Say Y here to allow to control the ingress flow to be passed at
+ specific time slot and be dropped at other specific time slot by
+ the gate entry list.
+
+ If unsure, say N.
+ To compile this code as a module, choose M here: the
+ module will be called act_gate.
+
+config NET_IFE_SKBMARK
+ tristate "Support to encoding decoding skb mark on IFE action"
+ depends on NET_ACT_IFE
+
+config NET_IFE_SKBPRIO
+ tristate "Support to encoding decoding skb prio on IFE action"
+ depends on NET_ACT_IFE
+
+config NET_IFE_SKBTCINDEX
+ tristate "Support to encoding decoding skb tcindex on IFE action"
+ depends on NET_ACT_IFE
+
+config NET_TC_SKB_EXT
+ bool "TC recirculation support"
+ depends on NET_CLS_ACT
+ select SKB_EXTENSIONS
+
+ help
+ Say Y here to allow tc chain misses to continue in OvS datapath in
+ the correct recirc_id, and hardware chain misses to continue in
+ the correct chain in tc software datapath.
+
+ Say N here if you won't be using tc<->ovs offload or tc chains offload.
+
+endif # NET_SCHED
+
+config NET_SCH_FIFO
+ bool